Only show failed Preseem syncs in the activity feed to reduce noise.
Successful syncs happen every 10-20 minutes and clutter the dashboard
without providing useful information to users.
Users can still see all sync history (including successful syncs) in
the Preseem integration settings page if needed.
Disable all IP blocking and 404 tracking to allow unrestricted access
while we review and tune ban thresholds and exemptions.
This is a temporary measure to prevent legitimate traffic from being
blocked. Will re-enable after proper configuration.
Add dark: variants throughout the marketing page and layout so text,
backgrounds, cards, badges, and borders render properly when the
system or user preference is set to dark mode. Use invert + screen
blend mode on the logo PNG to eliminate its white background.
Agent connections authenticate at the channel join level with token
validation, so they should not be subject to IP-based brute force
protection. This prevents legitimate agents from being banned when
connecting to the server.
Changes:
- Exempt /socket/agent/websocket from all IP ban checks
- Update documentation to reflect agent exemption
- Agents still authenticate securely via token during channel join
Increase max_attempts from 3 to 10 and add custom backoff/1 that uses
quadratic growth (attempt² × 60s) capped at 2 hours, so transient
network failures retry over ~9 hours rather than being discarded after
3 quick attempts.
Router devices were inflating per-site subscriber counts because:
1. CGNAT IPs (100.64.0.0/10) in router ARP tables caused false matches
2. Routers see all traffic and shouldn't have subscribers attributed
3. Site totals were computed from raw links without filtering
Changes:
- Filter CGNAT (RFC 6598) IPs from device subscriber links
- Deduplicate accounts across devices by match method priority
- Detect routers via SNMP sys_descr and zero out per-device counts
- Derive site totals from filtered per-device impacts
- Add per-device Subs/MRR columns to site device tables
- Add device link fallback for sites without IP blocks
- Fix Gaiia sync case mismatch and execution order
- Improve device list toolbar button icons and tooltips
When calling <.input name="..." ...> without a field or value attr, @value
was absent from assigns causing a KeyError. Added default: nil to the attr
and use __given__ to detect whether value was explicitly passed so the field
clause still reads value from the FormField correctly.
Add ErrorTrackerIgnorer to drop port_died, write_failed, epipe, and
broken pipe errors that occur during K8s pod shutdown. Same patterns
already filtered by HoneybadgerFilter and LoggerFilters.
The NetBox client crashed with "scheme is required for url" when
integration credentials had a nil or blank URL. normalize_url/1 now
validates the scheme and returns a clear error instead of letting
Finch blow up.
Replace the HoneybadgerNoticeFilter that emailed raw stacktraces on
every exception with ErrorTracker for self-hosted error tracking.
Honeybadger itself is retained. ErrorTracker dashboard is mounted at
/admin/errors behind the superuser auth wall.
CheckExecutorWorker was missing the phoenix_snmp_disabled and
should_phoenix_poll_device guards that DevicePollerWorker and
DeviceMonitorWorker already have. This caused SNMP checks to execute
through Phoenix even when devices are assigned to agents, creating
an infinite loop of failing jobs that fill the Oban queue.
JobCleanupTask was scheduling poller and monitor jobs for all SNMP-enabled
devices on every startup without checking phoenix_snmp_disabled. These jobs
would immediately bail out but still consumed queue capacity.
JobHealthCheckWorker had the same issue - recovering 'missing' monitor jobs
that would just no-op.
Both now check Client.phoenix_snmp_disabled() before scheduling.
When the Oban queue backs up, the 60-second uniqueness window expires
and duplicate jobs stack up per device. Switch to period: :infinity so
only one poll/monitor job exists per device at any time. Add replace
option to supersede stale scheduled jobs with updated scheduled_at.
Remove :executing from unique states so self-scheduling works while
the current job runs. Set max_attempts: 1 since retrying stale polls
is pointless.
Also fix all credo --strict issues across the codebase.
The form template iterated over changeset error tuples directly
(e.g. changeset.errors[:name] returns a tuple, not a list), causing
Protocol.UndefinedError for Enumerable on Tuple.
Rewrote form to use to_form/2 and <.input> components per LiveView
conventions. Errors are now handled properly by the input component.
- Index page with All/Active/Upcoming/Past filter tabs
- Show page with active banner, edit/delete actions
- Form page with scope picker (org-wide/site/device), datetime fields
- Nav link added to desktop and mobile nav
Each non-billing integration now shows under its proper category:
- Quality of Experience (Preseem)
- Incident Management (PagerDuty)
- Infrastructure & IPAM (NetBox)
- Fetch MAC address from Gaiia custom fields during inventory sync
- Remove name-based device matching (model names caused false matches)
- Keep IP-only matching for device suggestions
- Make unmapped rows clickable in the Gaiia mapping table
- Point authenticated logo link to /dashboard instead of /orgs
- Fix flaky monitor test teardown race condition
New role system:
- owner: full access + financials
- admin: full access + financials (except org deletion)
- executive: read-only + full financial visibility (MRR, revenue)
- technician: field ops (devices, sites, alerts) without financials
- member: legacy alias for technician (migrated)
- viewer: read-only, no financials
Financial data (MRR, revenue, billing) gated behind can_view_financials
assign in all LiveView templates: dashboard, alerts, trace, site show.
Includes migration to rename existing member roles to technician.
Temporarily hide config change tracking, config timeline links,
and config backup references across dashboard, site show, trace,
and home page. Code preserved with hidden class / HTML comments.
Temporarily disable all MikroTik-related UI elements using false guards.
Code is preserved and can be re-enabled by removing the guards.
Hidden: org settings tab/panel, device form config section,
device show backups/timeline tabs, site form config section,
help page nav item.
After Gaiia sync, match inventory item IPs against network site CIDR
blocks to populate account_count and total_mrr on each site. This
enables the Site Health table to show subscriber and MRR data per site.
Each billing sync (Gaiia, Splynx, VISP, Sonar) already computes
subscriber counts and MRR but only stored them in sync messages.
Now persists them on the integrations table so the dashboard can
aggregate across all billing providers instead of only querying
Gaiia network sites (which were never populated).
Also fixes SnmpKit Config environment detection to use Mix.env()
as fallback when MIX_ENV env var is not set.
- Use 2-column grid on mobile, flex-wrap on sm+
- Hide pipe separators on mobile (they break when items wrap)
- Stats now flow cleanly in a grid on small screens
- Hide Preseem ID, Status, IP, and Linked Device columns on mobile
- Show Preseem ID and status badge inline under name on small screens
- Add overflow-x-auto to table container
- Entity mapping table: hide Gaiia ID and Linked columns on mobile,
show Gaiia ID inline under name on small screens
- Allow text wrapping in name column for long names
- Add overflow-x-auto to table container for safety
- Redirect authenticated users from / to /dashboard instead of /orgs
- Splynx client: replace broken Basic Auth with proper token flow
(POST /api/2.0/admin/auth/tokens → Splynx-EA bearer header)
- Support both api_key and admin login auth types with fallback
- Add MRR calculation to Splynx sync using mrr_total field
- Integrations UI: per-provider credential fields (instance_url,
api_key, api_secret for Splynx; instance_url, api_token for Sonar)
- Wire up test_connection for Splynx, Sonar, and VISP providers
- Verified against live Splynx demo (demo.splynx.com):
auth, customers, routers, services all working
- All 7350 tests passing
Instead of showing all 4 billing providers as separate full-width cards,
the billing section now shows:
- When no billing connected: a compact 4-column grid picker to select
your billing platform (Gaiia, Sonar, Splynx, VISP)
- When one is active: a single card showing the connected provider with
status, sync info, and a note to disable before switching
This reduces visual clutter since users only ever use one billing system.
Non-exclusive categories (QoE, Incidents, Infrastructure) remain as
individual cards since multiple can be active simultaneously.
- Billing subscription and inventory item status fields are scalars, not objects
- IP blocks use "block" key, not "subnet"
- Strip nil variables from GraphQL pagination (Gaiia returns null for after:null)
- Handle nil root keys in paginated responses gracefully
- Handle empty string response from Preseem scores endpoint
