Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2898 lines
96 KiB
Text
2898 lines
96 KiB
Text
--**************************************************************************
|
|
--**************************************************************************
|
|
--
|
|
-- Copyright 2011 Cisco Systems, Inc.
|
|
-- All Rights Reserved
|
|
-- No portions of this material may be reproduced in any
|
|
-- form without the written permission of:
|
|
-- Cisco Systems, Inc.
|
|
-- 170 West Tasman Dr.
|
|
-- San Jose, CA 95134
|
|
-- USA
|
|
--
|
|
--**************************************************************************
|
|
|
|
SA-RG-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
enterprises,
|
|
Integer32,
|
|
Unsigned32,
|
|
IpAddress
|
|
FROM SNMPv2-SMI
|
|
ifIndex
|
|
FROM IF-MIB
|
|
TEXTUAL-CONVENTION,
|
|
RowStatus,
|
|
DisplayString,
|
|
MacAddress,
|
|
PhysAddress,
|
|
TruthValue,
|
|
DateAndTime
|
|
FROM SNMPv2-TC
|
|
InetAddressType,
|
|
InetAddress,
|
|
InetAddressIPv6,
|
|
InetPortNumber
|
|
FROM INET-ADDRESS-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB ;
|
|
|
|
sa OBJECT IDENTIFIER ::= { enterprises 1429 }
|
|
saModules OBJECT IDENTIFIER ::= { sa 79 }
|
|
|
|
saRg MODULE-IDENTITY
|
|
LAST-UPDATED "201505260000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO "support.cisco.com"
|
|
DESCRIPTION
|
|
"Controls the behavior of router/wireless functions.
|
|
Can be part of CM configuration file."
|
|
|
|
-- history
|
|
|
|
REVISION "201505260000Z"
|
|
DESCRIPTION "Initial release of reduced-set module for releases based on BFC 5.7.x."
|
|
|
|
::= { saModules 2 }
|
|
|
|
|
|
SaRgTimeZone ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time zones."
|
|
SYNTAX INTEGER {
|
|
gmtMinusTwelveEniwetokKwajalein(1),
|
|
gmtMinusElevenMidwayIslandSamoa(2),
|
|
gmtMinusTenHawaii(3),
|
|
gmtMinusNineAlaska(4),
|
|
gmtMinusEightPacificTimeCanadaTijuana(5),
|
|
gmtMinusSevenArizona(6),
|
|
gmtMinusSevenMountainTimeCanada(7),
|
|
gmtMinusSixCentralAmerica(8),
|
|
gmtMinusSixCentralTimeCanada(9),
|
|
gmtMinusSixMexicoCity(10),
|
|
gmtMinusSixSaskatchewan(11),
|
|
gmtMinusFiveBogotaLimaQuito(12),
|
|
gmtMinusFiveEasternTimeCanada(13),
|
|
gmtMinusFiveIndianaEast(14),
|
|
gmtMinusFourAtlanticTimeCanada(15),
|
|
gmtMinusFourCaracasLaPaz(16),
|
|
gmtMinusFourSantiago(17),
|
|
gmtMinusThreeThirtyNewfoundland(18),
|
|
gmtMinusThreeBrasilia(19),
|
|
gmtMinusThreeBuenosAiresGeorgetown(20),
|
|
gmtMinusThreeGreenland(21),
|
|
gmtMinusTwoMid-Atlantic(22),
|
|
gmtMinusOneAzores(23),
|
|
gmtMinusOneCapeVerdeIs(24),
|
|
gmtZeroCasablancaMonrovia(25),
|
|
gmtZeroDublinEdinburghLisbonLondon(26),
|
|
gmtPlusOneAmsterdamBerlinRomeStockholmVienna(27),
|
|
gmtPlusOneBelgradeBratislavaBudapestLjubljanaPrague(28),
|
|
gmtPlusOneBrusselsCopenhagenMadridParis(29),
|
|
gmtPlusOneSarajevoSkopjeSofijaVilniusWarsawZagreb(30),
|
|
gmtPlusOneWestCentralAfrica(31),
|
|
gmtPlusTwoAthensIstanbilMinsk(32),
|
|
gmtPlusTwoBucharest(33),
|
|
gmtPlusTwoHelsinkiRigaTallinn(34),
|
|
gmtPlusTwoJerusalem(35),
|
|
gmtPlusThreeBaghdad(36),
|
|
gmtPlusThreeMoscowStPetersburgVolgograd(37),
|
|
gmtPlusThreeNairobi(38),
|
|
gmtPlusThreeThirtyTehran(39),
|
|
gmtPlusFourAbuDhabiMuscat(40),
|
|
gmtPlusFourThirtyKabul(41),
|
|
gmtPlusFiveEkaterinburg(42),
|
|
gmtPlusFiveThirtyCalcuttaChennaiMumbaiNewDelhi(43),
|
|
gmtPlusFiveFourtyFiveKathmandu(44),
|
|
gmtPlusSixAlmatyNovosibirsk(45),
|
|
gmtPlusSixAstanaDhaka(46),
|
|
gmtPlusSixThirtyRangoon(47),
|
|
gmtPlusSevenBangkokHanoiJakarta(48),
|
|
gmtPlusSevenKrasnoyarsk(49),
|
|
gmtPlusEightBeijingChongqingHongKongUrumqi(50),
|
|
gmtPlusEightIrkustkUlaanBataar(51),
|
|
gmtPlusEightKualaLumpurSingapore(52),
|
|
gmtPlusEightTaipei(53),
|
|
gmtPlusNineOsakaSapporoTokyo(54),
|
|
gmtPlusNineSeoul(55),
|
|
gmtPlusNineThirtyAdelaide(56),
|
|
gmtPlusTenBrisbane(57),
|
|
gmtPlusTenVladivostok(58),
|
|
gmtPlusElevenMagadanSolomonIsNewCaledonia(59),
|
|
gmtPlusTwelveAucklandWellington(60),
|
|
gmtPlusTwelveFiji(61),
|
|
gmtPlusThirteenNukuAlofa(62)
|
|
}
|
|
|
|
-- RG Device
|
|
|
|
saRgDevice OBJECT IDENTIFIER ::= { saRg 1 }
|
|
|
|
saRgDeviceBase OBJECT IDENTIFIER ::= { saRgDevice 1 }
|
|
|
|
saRgDeviceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
multiSsid(1),
|
|
ipv4(3),
|
|
ipv6(4),
|
|
dualstack(5) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the mode of operation for the device.
|
|
This parameter is stored in non-vol and is multiSsid(1) by default.
|
|
Setting this object via SNMP will cause
|
|
the unit to reboot.
|
|
This MIB will be superseded in the config file by TLV202.
|
|
This MIB will read the proper value if set from TLV202.
|
|
This MIB will be superseded by saRgIpMgmtLanMode inbridge(1) or mixed(4).
|
|
disable(0): Value will reflect when TLV202 is set to 0. Not all platforms have this value implemented.
|
|
multiSsid(1): Default Value. Value supports IPv4RG with multiple SSID
|
|
configuration and bridge mode via saRgIpMgmtLanMode MIB.
|
|
Bridge mode is the same as eRouter disabled mode.
|
|
IPV4RG is the non eRouter behavior that existed before
|
|
in our router products.
|
|
Ipv4(3): eRouter IPv4 only mode
|
|
Ipv6(4): eRouter IPv6 only mode
|
|
Dualstack(5): eRouter IPv4 and IPv6 dualstack
|
|
Note: cableHome11(2) support is not available."
|
|
DEFVAL { 1 }
|
|
::= { saRgDeviceBase 1 }
|
|
|
|
saRgDeviceResetDefaultEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the reset to factory default functionality
|
|
of the gateway. This prevents the local user from using the reset
|
|
switch to gain access to the setup pages using the default user
|
|
name and password. The objective is to prevent theft of service
|
|
from a user who reconfigures the device to add users or change
|
|
wireless settings.
|
|
Enable (object set to true):
|
|
1. Momentary press of the Reset Switch (<5 seconds)
|
|
DOCSIS restart of the modem (reboot, no reset to factory
|
|
default values).
|
|
2. Pressing the reset switch for >5 seconds
|
|
Reboots and resets of all values (modem and router) to
|
|
factory default.
|
|
Disable (object set to false):
|
|
1. Momentary press of the Reset Switch (<5 seconds)
|
|
DOCSIS restart of the modem (reboot, no reset to factory
|
|
default values).
|
|
2. Pressing the reset switch for >5 seconds
|
|
Modem reboots and resets only the cable modem settings to
|
|
factory default values. The router settings should remain and
|
|
should not NOT reset to factory default."
|
|
DEFVAL { true }
|
|
::= { saRgDeviceBase 2 }
|
|
|
|
saRgDeviceRemoteWebAccessPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines what port to use for the WAN IP address of the gateway
|
|
to be able to access RG web pages.
|
|
This value is to be stored in non-vol and will persist across reboots.
|
|
Only a factory reset would clear it"
|
|
DEFVAL { 8080 }
|
|
::= { saRgDeviceBase 4 }
|
|
|
|
saRgDeviceLanLanIsolation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is only available in D3.0 products.
|
|
This MIB does not take effect if the modem is in VLAN mode i.e if saRgIpMgmtLanMode.32=vlan(5).
|
|
Lan-Lan Isolation allows you block IP access between CPEs connected to the Ethernet ports.
|
|
Use this mib in conjunction with saRgDeviceLanWlanIsolation and saRgDot11BssApIsolation.x for
|
|
complete isolation between CPEs connected to the RG.
|
|
This MIB is written to non-vol and set to disable(0) after a factory reset.
|
|
disable(0)- No Isolation
|
|
enable(1)- Enable Isolation feature"
|
|
DEFVAL { 0 }
|
|
::= { saRgDeviceBase 6 }
|
|
|
|
saRgDeviceLanWlanIsolation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is only available in D3.0 products.
|
|
This MIB does not take effect if the modem is in VLAN mode i.e if saRgIpMgmtLanMode.32=vlan(5).
|
|
Lan-Wlan Isolation allows you block IP access between CPEs connected to the Ethernet port and
|
|
Wireless SSIDs.
|
|
Use this mib in conjunction with saRgDeviceLanLanIsolation and saRgDot11BssApIsolation.x for
|
|
complete isolation between CPEs connected to the RG.
|
|
This MIB is written to non-vol and set to disable(0) after a factory reset.
|
|
disable(0)- No Isolation
|
|
enable(1)- Enable Isolation feature"
|
|
DEFVAL { 0 }
|
|
::= { saRgDeviceBase 7 }
|
|
|
|
saRgDeviceIpv6Trans OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
dslite(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB will control which IPv6 transition technology is enabled on the device.
|
|
After setting this MIB to disable in the config file, IPv4 traffic will pass normally
|
|
through the device. When switched to dslite, the DSLite feature will be enabled.
|
|
If eRouter is in IPv6-only mode, DS Lite will tunnel IPv4 traffic over IPv6 to the AFTR
|
|
address specified either manually or in the DHCPv6 option-64. See saRgDslite MIB tree
|
|
for more details.
|
|
If this setting is changed by the config file, the CM will reboot.
|
|
This MIB is written to non-vol and set to disable(0) after a factory reset.
|
|
disable(0) - No technology is enabled
|
|
enable(1) - DS lite feature is enabled"
|
|
DEFVAL { 0 }
|
|
::= { saRgDeviceBase 8 }
|
|
|
|
saRgDeviceIpv6Passthrough OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB controls IPv6 passthrough on the RG and is applicable in bridge and router modes.
|
|
When disabled the RG will function without any IPv6 passthrough
|
|
When IPv6 passthrough is enabled in Bridge Mode the RG will drop all IPv4 traffic
|
|
When IPv6 passthrough is enabled in router mode the RG will operate as normal for IPv4 traffic, but all IPv6 traffic will passthrough
|
|
This MIB requires CM reboot.
|
|
This MIB is written to non-vol and set to disable(0) after a factory reset."
|
|
DEFVAL { 0 }
|
|
::= { saRgDeviceBase 9 }
|
|
|
|
saRgDeviceFactoryReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
routerAndWifi(1),
|
|
routerOnly(2),
|
|
wifi(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set routerAndWifi(1) to restore default settings of both the router and wifi.
|
|
Set routerOnly(2) to restore default settings of the router.
|
|
Set wifi(3) to restore default settings of the wifi.
|
|
Return false(0) when read."
|
|
DEFVAL { 0 }
|
|
::= { saRgDeviceBase 1002 }
|
|
|
|
saRgDeviceTimeSetup OBJECT IDENTIFIER ::= { saRgDevice 5 }
|
|
|
|
saRgDeviceTimeSetupNtpEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stored in non-vol, disabled after factory reset."
|
|
::= { saRgDeviceTimeSetup 1 }
|
|
|
|
saRgDeviceTimeSetupNtpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDeviceTimeSetupNtpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Up to 3 NTP servers are supported. This table
|
|
is stored in non-vol. Default entries after factory
|
|
reset are:
|
|
1: time.nist.gov
|
|
2: nist.aol-ca.truetime.com
|
|
3: nist1-ny.glassey.com"
|
|
::= { saRgDeviceTimeSetup 2 }
|
|
|
|
saRgDeviceTimeSetupNtpServerEntry OBJECT-TYPE
|
|
SYNTAX SaRgDeviceTimeSetupNtpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { saRgDeviceTimeSetupNtpServerIndex }
|
|
::= { saRgDeviceTimeSetupNtpServerTable 1 }
|
|
|
|
SaRgDeviceTimeSetupNtpServerEntry ::= SEQUENCE {
|
|
saRgDeviceTimeSetupNtpServerIndex INTEGER,
|
|
saRgDeviceTimeSetupNtpServerAddress SnmpAdminString
|
|
}
|
|
|
|
saRgDeviceTimeSetupNtpServerIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgDeviceTimeSetupNtpServerEntry 1 }
|
|
|
|
saRgDeviceTimeSetupNtpServerAddress OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address or FQDN of the NTP server."
|
|
::= { saRgDeviceTimeSetupNtpServerEntry 2 }
|
|
|
|
saRgDeviceTimeSetupZone OBJECT-TYPE
|
|
SYNTAX SaRgTimeZone
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time zone for the gateway.
|
|
Stored in non-vol, gmtZeroDublinEdinburghLisbonLondon(26)
|
|
after factory reset."
|
|
::= { saRgDeviceTimeSetup 3 }
|
|
|
|
saRgDeviceTimeSetupDst OBJECT-TYPE
|
|
SYNTAX INTEGER (0..120)
|
|
UNITS "Minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Daylight saving time. If set to 0, DST is disabled
|
|
Stored in non-vol, 0 after factory reset."
|
|
::= { saRgDeviceTimeSetup 4 }
|
|
|
|
-- MIBs to poll IANA / PD info for eRouter interface
|
|
|
|
saRgDeviceIanaContent OBJECT IDENTIFIER ::= { saRgDevice 7 }
|
|
|
|
saRgDeviceIanaIAID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the IAID value embedded in the IA_NA for the
|
|
eRouter's DHCPv6 lease."
|
|
::= { saRgDeviceIanaContent 1 }
|
|
|
|
saRgDeviceIanaT1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the T1 value embedded in the IA_NA for the eRouter's
|
|
DHCPv6 lease."
|
|
::= { saRgDeviceIanaContent 2 }
|
|
|
|
saRgDeviceIanaT2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the T2 value embedded in the IA_NA for the eRouter's
|
|
DHCPv6 lease."
|
|
::= { saRgDeviceIanaContent 3 }
|
|
|
|
saRgDeviceIanaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDeviceIanaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of IA Address entries associated with IA_NA for the
|
|
eRouter's DHCPv6 lease."
|
|
::= { saRgDeviceIanaContent 4 }
|
|
|
|
saRgDeviceIanaEntry OBJECT-TYPE
|
|
SYNTAX SaRgDeviceIanaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of IA Address entries associated with IA_NA for the
|
|
eRouter's DHCPv6 lease."
|
|
INDEX { saRgDeviceIanaIndex }
|
|
::= { saRgDeviceIanaTable 1 }
|
|
|
|
SaRgDeviceIanaEntry ::= SEQUENCE {
|
|
saRgDeviceIanaIndex INTEGER,
|
|
saRgDeviceIanaValue InetAddress,
|
|
saRgDeviceIanaPreferredLifetime Integer32,
|
|
saRgDeviceIanaValidLifetime Integer32
|
|
}
|
|
|
|
saRgDeviceIanaIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgDeviceIanaEntry 1 }
|
|
|
|
saRgDeviceIanaValue OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 address provided to the eRouter WAN interface via DHCPv6."
|
|
::= { saRgDeviceIanaEntry 2 }
|
|
|
|
saRgDeviceIanaPreferredLifetime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Preferred Lifetime setting for an IPv6 address assigned to the
|
|
eRouter."
|
|
::= { saRgDeviceIanaEntry 3 }
|
|
|
|
saRgDeviceIanaValidLifetime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid Lifetime setting for an IPv6 address assigned to the
|
|
eRouter."
|
|
::= { saRgDeviceIanaEntry 4 }
|
|
|
|
|
|
|
|
saRgDeviceIapdContent OBJECT IDENTIFIER ::= { saRgDevice 8 }
|
|
|
|
saRgDeviceIapdIAID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the IAID value embedded in the IA_PD for the
|
|
eRouter's DHCPv6 lease."
|
|
::= { saRgDeviceIapdContent 1 }
|
|
|
|
saRgDeviceIapdT1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the T1 value embedded in the IA_PD for the eRouter's
|
|
DHCPv6 lease."
|
|
::= { saRgDeviceIapdContent 2 }
|
|
|
|
saRgDeviceIapdT2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the T2 value embedded in the IA_PD for the eRouter's
|
|
DHCPv6 lease."
|
|
::= { saRgDeviceIapdContent 3 }
|
|
|
|
saRgDeviceIapdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDeviceIapdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of IA Prefix entries associated with IA_PD for the
|
|
eRouter's DHCPv6 lease."
|
|
::= { saRgDeviceIapdContent 4 }
|
|
|
|
saRgDeviceIapdEntry OBJECT-TYPE
|
|
SYNTAX SaRgDeviceIapdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of IA Address entries associated with IA_PD for the
|
|
eRouter's DHCPv6 lease."
|
|
INDEX { saRgDeviceIapdIndex }
|
|
::= { saRgDeviceIapdTable 1 }
|
|
|
|
SaRgDeviceIapdEntry ::= SEQUENCE {
|
|
saRgDeviceIapdIndex INTEGER,
|
|
saRgDeviceIapdPreferredLifetime Integer32,
|
|
saRgDeviceIapdValidLifetime Integer32,
|
|
saRgDeviceIapdPrefixLength INTEGER,
|
|
saRgDeviceIapdPrefixValue InetAddress
|
|
}
|
|
|
|
saRgDeviceIapdIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgDeviceIapdEntry 1 }
|
|
|
|
saRgDeviceIapdPreferredLifetime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Preferred Lifetime setting for an IPv6 address assigned to the
|
|
eRouter."
|
|
::= { saRgDeviceIapdEntry 2 }
|
|
|
|
saRgDeviceIapdValidLifetime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid Lifetime setting for an IPv6 address assigned to the
|
|
eRouter."
|
|
::= { saRgDeviceIapdEntry 3 }
|
|
|
|
saRgDeviceIapdPrefixLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length (in bits) for this prefix."
|
|
::= { saRgDeviceIapdEntry 4 }
|
|
|
|
saRgDeviceIapdPrefixValue OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Prefix address specified in the IA_PD."
|
|
::= { saRgDeviceIapdEntry 5 }
|
|
|
|
-- ******************
|
|
-- ***** 802.11 *****
|
|
-- ******************
|
|
|
|
saRgDot11 OBJECT IDENTIFIER ::= { saRg 2 }
|
|
|
|
-- *************************
|
|
-- GENERAL AND CHANNEL SETUP
|
|
-- *************************
|
|
|
|
saRgDot11MgmtBase OBJECT IDENTIFIER ::= { saRgDot11 1 }
|
|
|
|
saRgDot11OnOffPushButtonTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies how long to press WPS button to enable or disable
|
|
the WiFi interface (primary SSID). When set to 11, the feature
|
|
is disabled.
|
|
Stored in non-vol, 11 after factory reset."
|
|
::= { saRgDot11MgmtBase 20 }
|
|
|
|
-- =====================
|
|
-- PER BSS CONFIGURATION
|
|
-- =====================
|
|
-- The interface numbers are:
|
|
-- 32: SSID1 + LAN
|
|
-- 33: SSID2
|
|
-- 34: SSID3
|
|
-- 35: SSID4
|
|
-- 36: SSID5
|
|
-- 37: SSID6
|
|
-- 38: SSID7
|
|
-- 39: SSID8
|
|
|
|
|
|
saRgDot11Bss OBJECT IDENTIFIER ::= { saRgDot11 2 }
|
|
|
|
saRgDot11BssTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDot11BssEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BSS table"
|
|
::= { saRgDot11Bss 1 }
|
|
|
|
saRgDot11BssEntry OBJECT-TYPE
|
|
SYNTAX SaRgDot11BssEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table which represents parameters for SSID."
|
|
INDEX { ifIndex }
|
|
::= { saRgDot11BssTable 1 }
|
|
|
|
SaRgDot11BssEntry ::=
|
|
SEQUENCE {
|
|
saRgDot11BssId PhysAddress,
|
|
saRgDot11BssEnable INTEGER,
|
|
saRgDot11BssSsid OCTET STRING,
|
|
saRgDot11BssSecurityMode INTEGER,
|
|
saRgDot11BssClosedNetwork TruthValue,
|
|
saRgDot11BssAccessMode INTEGER,
|
|
saRgDot11BssMaxNumSta INTEGER,
|
|
saRgDot11BssUserStatus INTEGER,
|
|
saRgDot11BssApIsolation INTEGER,
|
|
saRgDot11BssSecSsidTrafficPriority INTEGER,
|
|
saRgDot11BssRejectPriSsidSta TruthValue
|
|
}
|
|
|
|
saRgDot11BssId OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the BSSID"
|
|
::= { saRgDot11BssEntry 1 }
|
|
|
|
saRgDot11BssEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
enableOnline(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the BSS state.
|
|
When set to enableOnline(3), the SSID is enabled only
|
|
when the cable modem is online. When the modem changes
|
|
state to offline, the AP will send dissasociation messages
|
|
to the STAs connected to the SSID and then disable.
|
|
The value of primary BSS is stored in non-vol and is enabled(1)
|
|
after factory reset.
|
|
The other BSSs are disabled by default. If other
|
|
BSS's SSID name is not defined, the BSS will not
|
|
be enabled."
|
|
::= { saRgDot11BssEntry 2 }
|
|
|
|
saRgDot11BssSsid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls and reflects the service set identifier.
|
|
The value of primary BSS is stored in non-vol and is
|
|
empty after factory reset.
|
|
If other BSS's SSID name is not defined, the BSS
|
|
will not be enabled."
|
|
::= { saRgDot11BssEntry 3 }
|
|
|
|
saRgDot11BssSecurityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
wep(1),
|
|
wpaPsk(2),
|
|
wpa2Psk(3),
|
|
wpaEnterprise(4),
|
|
wpa2Enterprise(5),
|
|
--radiusWep(6)
|
|
wpaWpa2Psk(7),
|
|
wpaWpa2Enterprise(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secrity for BSS.
|
|
Beacause WPA2 is backwords compatible with WPA, setting this
|
|
object to wpaWpa2Psk(7) is allowed and has the same effect as
|
|
setting to wpa2Psk(3). The same is true for wpaWpa2Enterprise(8)
|
|
and wpa2Enterprise(5).
|
|
The value for primary BSS is stored in non-vol and is wpaWpa2Psk(7)
|
|
after factory reset.
|
|
For each other BSS security has to be included in configuration
|
|
file or the BSS will be disabled."
|
|
::= { saRgDot11BssEntry 4 }
|
|
|
|
saRgDot11BssClosedNetwork OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the device will operate in closed network mode. If
|
|
set to true(1), then the network mode is closed and the SSID will not
|
|
be broadcast in beacon packets. If set to false(2), then the network
|
|
mode is open and the SSID will be broadcast in beacon packets.
|
|
The value for primary BSS is stored in non-vol.
|
|
The default value for other BSSs is false."
|
|
::= { saRgDot11BssEntry 5 }
|
|
|
|
saRgDot11BssAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allowAny(0),
|
|
allowList(1),
|
|
denyList(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls what stations will be given access to the device. If set to
|
|
allowAny(0), then any station will be allowed to connect. If set
|
|
to allowList(1), then only stations whose MAC address appears in
|
|
the saRgDot11AccessMacTable will be allowed to connect.
|
|
The value for primary BSS is stored in non-vol.
|
|
The default value for other BSSs is 0."
|
|
::= { saRgDot11BssEntry 6 }
|
|
|
|
saRgDot11BssMaxNumSta OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the maximum number of STAs that can connect to
|
|
this SSID. Note that the maximum number of STA accross all SSIDs in
|
|
the AP is 128.
|
|
Default value is 128 for all SSIDs.
|
|
The value for primary BSS is stored in non-vol."
|
|
::= { saRgDot11BssEntry 11 }
|
|
|
|
saRgDot11BssUserStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides the BSS Id Web UI or Wireless ON/OFF (if exist) status that
|
|
is set by the user. If the user can press the Wireless ON/OFF (if
|
|
exist) button and its status can be seen in BSS ID Web UI. If user
|
|
changes access point status in Web UI, it will reflect the status of
|
|
Wireless ON/OFF LED."
|
|
::= { saRgDot11BssEntry 13 }
|
|
|
|
saRgDot11BssApIsolation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is only available in D3.0 products.
|
|
AP Isolation (Access Point Isolation) allows you to isloate traffic between CPEs on
|
|
the same Wifi SSID. This allows a measure of security to prevent hackers from accessing other CPEs in
|
|
a public Wifi environment.
|
|
Ex. When this MIB is enabled you can not ping between CPEs connected to the same SSID.
|
|
AP Isolation is settable per SSID in either VLAN or non VLAN modes.
|
|
This MIB is written to non-vol and set to disable(0) after a factory reset.
|
|
disable(0)- No AP Isolation
|
|
enable(1)- Enable AP Isolation feature."
|
|
DEFVAL { 0 }
|
|
::= { saRgDot11BssEntry 15 }
|
|
|
|
saRgDot11BssSecSsidTrafficPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
acBk(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot
|
|
environment. When disabled, all the traffic to the secondary SSID in question would have same WMM QoS
|
|
parameters as the primary SSID. When set to ac_bk(1), the secondary SSID traffic would be classified as
|
|
AC_BK resulting in better DS prioritization for primary SSID traffic"
|
|
|
|
DEFVAL { 0 }
|
|
::= { saRgDot11BssEntry 16 }
|
|
|
|
saRgDot11BssRejectPriSsidSta OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot
|
|
environment. By default, a private SSID STA can associate to hotspot SSID. This MIB can be used
|
|
to reject private SSID STAs to associate with hotspot SSID if and only if STA has associated with private
|
|
SSID once before."
|
|
|
|
DEFVAL { false }
|
|
::= { saRgDot11BssEntry 17 }
|
|
|
|
-- PRIMARY BSS SPECIFIC
|
|
|
|
saRgDot11BssPrimary OBJECT IDENTIFIER ::= { saRgDot11Bss 3 }
|
|
|
|
saRgDot11BssPrimarySsidType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mac6char(1),
|
|
mac6char-prefix(2),
|
|
mac4char-prefix(3),
|
|
prefix-force(4)
|
|
-- Value 5 is reserved
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of SSID used.
|
|
mac6char(1): If saRgDot11BssSsid.32 is empty, the SSID is the last
|
|
3 bytes of DOCSIS MAC address, displayed as 6 lowercase
|
|
hex characters.
|
|
If saRgDot11BssSsid.32 is not empty, SSID is the value from
|
|
saRgDot11BssSsid.32 (set by SNMP or the user).
|
|
mac6char-prefix(2): the same as mac6char(2) with the prefix addition
|
|
defined in saRgDot11BssPrimarySsidPrefix.
|
|
If saRgDot11BssSsid.32 is not empty, this prefix
|
|
does not show.
|
|
mac4char-prefix(3): the same as mac6char-prefix(2) but 4 MAC characters
|
|
instead of 6.
|
|
prefix-force(4): The prefix is always included, even if saRgDot11BssSsid.32
|
|
is empty.
|
|
Note: stored in non-vol. mac6char(1) after factory reset"
|
|
::= { saRgDot11BssPrimary 1 }
|
|
|
|
saRgDot11BssPrimarySsidPrefix OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix for primary SSID, if saRgDot11BssSsid.32 is empty
|
|
and saRgDot11BssPrimarySsidType is set to mac6char-prefix(2).
|
|
Stored in non-vol. Empty after factory reset."
|
|
::= { saRgDot11BssPrimary 2 }
|
|
|
|
-- ******************
|
|
-- PRIVACY PARAMETERS
|
|
-- ******************
|
|
|
|
-- saRgDot11MgmtPrivacy contains objects from the 'Privacy' web page
|
|
|
|
saRgDot11Privacy OBJECT IDENTIFIER ::= { saRgDot11 3 }
|
|
|
|
|
|
-- WPA
|
|
|
|
saRgDot11WpaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDot11WpaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WPA table"
|
|
::= { saRgDot11Privacy 1 }
|
|
|
|
saRgDot11WpaEntry OBJECT-TYPE
|
|
SYNTAX SaRgDot11WpaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table which represents WPA parameters for BSS."
|
|
INDEX { ifIndex }
|
|
::= { saRgDot11WpaTable 1 }
|
|
|
|
SaRgDot11WpaEntry ::=
|
|
SEQUENCE {
|
|
saRgDot11WpaAlgorithm INTEGER,
|
|
saRgDot11WpaPreSharedKey OCTET STRING,
|
|
saRgDot11WpaGroupRekeyInterval INTEGER
|
|
}
|
|
|
|
saRgDot11WpaAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tkip(0),
|
|
aes(1),
|
|
tkipPlusAes(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tkip(0) is not allowed when security is WPA2.
|
|
The value for primary BSS is stored in non-vol and tkipPlusAes(2)
|
|
after factory reset.
|
|
The default value for other BSSs is tkip."
|
|
::= { saRgDot11WpaEntry 1 }
|
|
|
|
saRgDot11WpaPreSharedKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the WPA Pre-Shared Key (PSK). This value MUST be either a
|
|
64-digit hexadecimal number, OR a 8 to 63 character ASCII string.
|
|
The value for primary BSS is stored in non-vol and is the serial
|
|
number of the device after factory reset.
|
|
The default value for other BSSs is 8 0's.
|
|
This object return an empty string when read."
|
|
::= { saRgDot11WpaEntry 2 }
|
|
|
|
saRgDot11WpaGroupRekeyInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the WPA Group Rekey Interval in seconds. Set to zero to disable
|
|
periodic rekeying.
|
|
The value for primary BSS is stored in non-vol and is 3600 after
|
|
factory reset.
|
|
The default value for other BSSs is 3600."
|
|
::= { saRgDot11WpaEntry 3 }
|
|
|
|
|
|
-- RADIUS
|
|
|
|
saRgDot11RadiusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDot11RadiusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WPA table"
|
|
::= { saRgDot11Privacy 2 }
|
|
|
|
saRgDot11RadiusEntry OBJECT-TYPE
|
|
SYNTAX SaRgDot11RadiusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table which represents WPA parameters for BSS."
|
|
INDEX { ifIndex }
|
|
::= { saRgDot11RadiusTable 1 }
|
|
|
|
SaRgDot11RadiusEntry ::=
|
|
SEQUENCE {
|
|
saRgDot11RadiusAddressType InetAddressType,
|
|
saRgDot11RadiusAddress InetAddress,
|
|
saRgDot11RadiusPort InetPortNumber,
|
|
saRgDot11RadiusKey DisplayString,
|
|
saRgDot11RadiusReAuthInterval INTEGER
|
|
}
|
|
|
|
|
|
saRgDot11RadiusAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of RADIUS server IP address."
|
|
DEFVAL { ipv4 }
|
|
::= { saRgDot11RadiusEntry 1 }
|
|
|
|
|
|
saRgDot11RadiusAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets RADIUS server IP address.
|
|
The value for primary BSS is stored in non-vol and is 0.0.0.0
|
|
after factory reset.
|
|
The default value for other BSSs is 0.0.0.0."
|
|
::= { saRgDot11RadiusEntry 2 }
|
|
|
|
saRgDot11RadiusPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the UDP port used to communicate with the RADIUS server.
|
|
The value for primary BSS is stored in non-vol and is 1645
|
|
after factory reset.
|
|
The default value for other BSSs is 1645."
|
|
::= { saRgDot11RadiusEntry 3 }
|
|
|
|
saRgDot11RadiusKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets or displays the RADIUS key.
|
|
The value for primary BSS is stored in non-vol and is null
|
|
after factory reset.
|
|
The default value for other BSSs is null.
|
|
This object return an empty string when read."
|
|
::= { saRgDot11RadiusEntry 4 }
|
|
|
|
saRgDot11RadiusReAuthInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the RADIUS Rekey Interval in seconds.
|
|
Set to zero to disable periodic rekeying.
|
|
The value for primary BSS is stored in non-vol and is 3600
|
|
after factory reset.
|
|
The default value for other BSSs is 3600."
|
|
::= { saRgDot11RadiusEntry 5 }
|
|
|
|
|
|
-- WEP
|
|
|
|
saRgDot11WepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDot11WepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP table"
|
|
::= { saRgDot11Privacy 3 }
|
|
|
|
saRgDot11WepEntry OBJECT-TYPE
|
|
SYNTAX SaRgDot11WepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table which represents WPA parameters for BSS."
|
|
INDEX { ifIndex }
|
|
::= { saRgDot11WepTable 1 }
|
|
|
|
SaRgDot11WepEntry ::=
|
|
SEQUENCE {
|
|
saRgDot11WepDefaultKey INTEGER,
|
|
saRgDot11WepEncryptionMode INTEGER,
|
|
saRgDot11WepPassPhrase DisplayString
|
|
}
|
|
|
|
saRgDot11WepDefaultKey OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls and reflects the default key which will be used when 64 or
|
|
128 bit encryption is enabled. Indicates the entry from the
|
|
saRgDot1164BitKeyTable if saRgDot11EncryptionMode is set to wep64(1), or
|
|
the entry from the saRgDot11128BitKeyTable if saRgDot11EncryptionMode is set
|
|
to wep128(2).
|
|
The value for primary BSS is stored in non-vol and is 1 after factory reset.
|
|
The default value for other BSSs is 1."
|
|
::= { saRgDot11WepEntry 1 }
|
|
|
|
saRgDot11WepEncryptionMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wep64(0),
|
|
wep128(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for primary BSS is stored in non-vol and is wep128(1)
|
|
after factory reset.
|
|
The default value for other BSSs is wep128."
|
|
::= { saRgDot11WepEntry 2 }
|
|
|
|
saRgDot11WepPassPhrase OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls and reflects the WEP pass phrase.
|
|
The value for primary BSS is stored in non-vol and is null
|
|
after factory reset.
|
|
The default value for other BSSs is null.
|
|
This object return an empty string when read."
|
|
::= { saRgDot11WepEntry 3 }
|
|
|
|
|
|
|
|
-- WEP 64-bit keys:
|
|
|
|
saRgDot11Wep64BitKeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDot11Wep64BitKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of 40 bit key values used when saRgDot11WepEncryptionMode
|
|
is set to wep64(0)."
|
|
::= { saRgDot11Privacy 4 }
|
|
|
|
saRgDot11Wep64BitKeyEntry OBJECT-TYPE
|
|
SYNTAX SaRgDot11Wep64BitKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table which represents a single 64 bit key."
|
|
INDEX { ifIndex, saRgDot11Wep64BitKeyIndex }
|
|
::= { saRgDot11Wep64BitKeyTable 1 }
|
|
|
|
SaRgDot11Wep64BitKeyEntry ::=
|
|
SEQUENCE {
|
|
saRgDot11Wep64BitKeyIndex Integer32,
|
|
saRgDot11Wep64BitKeyValue OCTET STRING
|
|
}
|
|
|
|
saRgDot11Wep64BitKeyIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the instance of this table row."
|
|
::= { saRgDot11Wep64BitKeyEntry 1 }
|
|
|
|
saRgDot11Wep64BitKeyValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(5))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 40 bit key to be used when saRgDot11WepEncryptionMode is set to wep64(1).
|
|
The value for primary BSS is stored in non-vol and is all 1's after factory
|
|
reset.
|
|
The default value for other BSSs is all 0's.
|
|
This object return an empty string when read."
|
|
::= { saRgDot11Wep64BitKeyEntry 2 }
|
|
|
|
-- WEP 128-bit keys:
|
|
|
|
saRgDot11Wep128BitKeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDot11Wep128BitKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of 104 bit key values used when saRgDot11WepEncryptionMode
|
|
is set to wep128(1)."
|
|
::= { saRgDot11Privacy 5 }
|
|
|
|
saRgDot11Wep128BitKeyEntry OBJECT-TYPE
|
|
SYNTAX SaRgDot11Wep128BitKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table which represents a single 128 bit key."
|
|
INDEX { ifIndex, saRgDot11Wep128BitKeyIndex }
|
|
::= { saRgDot11Wep128BitKeyTable 1 }
|
|
|
|
SaRgDot11Wep128BitKeyEntry ::=
|
|
SEQUENCE {
|
|
saRgDot11Wep128BitKeyIndex Integer32,
|
|
saRgDot11Wep128BitKeyValue OCTET STRING
|
|
}
|
|
|
|
saRgDot11Wep128BitKeyIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the instance of this table row."
|
|
::= { saRgDot11Wep128BitKeyEntry 1 }
|
|
|
|
saRgDot11Wep128BitKeyValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(13))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 104 bit key to be used when saRgDot11WepEncryptionMode is set to wep128(2).
|
|
The value for primary BSS is stored in non-vol and is all 1's.
|
|
The default value for other BSSs is all 0's.
|
|
This object return an empty string when read."
|
|
::= { saRgDot11Wep128BitKeyEntry 2 }
|
|
|
|
|
|
saRgDot11PrivacyWps OBJECT IDENTIFIER ::= { saRgDot11Privacy 6 }
|
|
|
|
saRgDot11PrivacyWpsPushButtonTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies how long to press WPS button to start the WPS
|
|
procedure. 0 means disable WPS.
|
|
Stored in non-vol, 1 after factory reset."
|
|
::= { saRgDot11PrivacyWps 1 }
|
|
|
|
|
|
-- ASSOCIATED CLIENTS TREE
|
|
|
|
saRgDot11Client OBJECT IDENTIFIER ::= { saRgDot11 4 }
|
|
|
|
saRgDot11ClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDot11ClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of wireless clients that are associated with the BSS."
|
|
::= { saRgDot11Client 2 }
|
|
|
|
saRgDot11ClientEntry OBJECT-TYPE
|
|
SYNTAX SaRgDot11ClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table that specifies a single station MAC address."
|
|
INDEX { ifIndex, saRgDot11ClientIndex }
|
|
::= { saRgDot11ClientTable 1 }
|
|
|
|
SaRgDot11ClientEntry ::=
|
|
SEQUENCE {
|
|
saRgDot11ClientIndex Integer32,
|
|
saRgDot11ClientStation MacAddress
|
|
}
|
|
|
|
saRgDot11ClientIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the instance of this table row."
|
|
::= { saRgDot11ClientEntry 1 }
|
|
|
|
saRgDot11ClientStation OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A MAC address of a client associated with the BSS."
|
|
::= { saRgDot11ClientEntry 2 }
|
|
|
|
----------------------------------------------------------------------
|
|
--- saRgDot11ExtMgmt
|
|
--- Table to support Multiple Radios
|
|
--- Note: Indexes may be set to support specific hardware interfaces.
|
|
--- Index 32 MUST match saRgDot11OperMode and vice versa
|
|
-----------------------------------------------------------------------
|
|
|
|
saRgDot11ExtMgmt OBJECT IDENTIFIER ::= { saRgDot11 6 }
|
|
|
|
saRgDot11ExtMgmtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgDot11ExtMgmtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiple Radio Configuration Table"
|
|
::= { saRgDot11ExtMgmt 1 }
|
|
|
|
saRgDot11ExtMgmtEntry OBJECT-TYPE
|
|
SYNTAX SaRgDot11ExtMgmtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table which represents parameters for a Radio.
|
|
Index 32 should be set for Radio 0 -- 2.4 GHz if populated.
|
|
Index 112 should be set for Radio 1"
|
|
|
|
INDEX { ifIndex }
|
|
::= { saRgDot11ExtMgmtTable 1 }
|
|
|
|
SaRgDot11ExtMgmtEntry ::=
|
|
SEQUENCE {
|
|
saRgDot11ExtOperMode INTEGER,
|
|
saRgDot11ExtCurrentChannel Unsigned32,
|
|
saRgDot11ExtBeaconInterval Unsigned32,
|
|
saRgDot11ExtDTIMInterval Unsigned32,
|
|
saRgDot11ExtFragThresh Unsigned32,
|
|
saRgDot11ExtRTSThresh Unsigned32,
|
|
saRgDot11ExtSRL Unsigned32,
|
|
saRgDot11ExtLRL Unsigned32,
|
|
saRgDot11ExtCtsProtectionEnable TruthValue,
|
|
saRgDot11ExtRate INTEGER,
|
|
saRgDot11ExtOutputPower INTEGER,
|
|
saRgDot11ExtCountry INTEGER,
|
|
saRgDot11ExtAntenna INTEGER,
|
|
saRgDot11ExtMbssUserControl INTEGER,
|
|
saRgDot11ExtMbssUseNonvol TruthValue,
|
|
saRgDot11ExtMbssAdminControl INTEGER,
|
|
saRgDot11ExtActualChannel INTEGER,
|
|
saRgDot11ExtOnOffPushButtonTime INTEGER,
|
|
saRgDot11ExtWmm INTEGER,
|
|
saRgDot11ExtWmmNoAck INTEGER,
|
|
saRgDot11ExtMulticastRate INTEGER,
|
|
saRgDot11ExtWirelessButtonOperation INTEGER,
|
|
saRgDot11ExtWpsEnable INTEGER,
|
|
saRgDot11ExtWpsPin Integer32,
|
|
saRgDot11ExtForceRescan INTEGER
|
|
|
|
}
|
|
|
|
saRgDot11ExtMbssUserControl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8|65536..16711680)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the number of user controlled Wifi networks via web pages.
|
|
1: The user has control over the primary wireless network only.
|
|
No guest network page is displayed.
|
|
2: The user has control over the primary wireless network and
|
|
one guest network. No drop down menu (or only 1 item in the
|
|
menu) for additional guest network configuration.
|
|
3: Same as above with 2 guest networks.
|
|
4: Same as above with 3 guest networks.
|
|
5: Same as above with 4 guest networks.
|
|
6: Same as above with 5 guest networks.
|
|
7: Same as above with 6 guest networks.
|
|
8: Same as above with 7 guest networks.
|
|
|
|
Bit Mask Control:
|
|
Bit 16: -- User has control over Primary Wireless Network : 65536
|
|
Bit 17: -- User has control over Guest Network 1 (interface 33) : 131072
|
|
Bit 18: -- User has control over Guest Network 2 (interface 34) : 262144
|
|
Bit 19: -- User has control over Guest Network 3 (interface 35) : 524288
|
|
Bit 20: -- User has control over Guest Network 4 (interface 36) :1048576
|
|
Bit 21: -- User has control over Guest Network 5 (interface 37) :2097152
|
|
Bit 22: -- User has control over Guest Network 6 (interface 38) :4194304
|
|
Bit 23: -- User has control over Guest Network 7 (interface 39) :8388608
|
|
|
|
This object value is stored in non-vol and set to 1
|
|
after factory reset."
|
|
::= { saRgDot11ExtMgmtEntry 15 }
|
|
|
|
saRgDot11ExtMbssUseNonvol OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows to save additional BSS parameters to non-vol if set to true.
|
|
Primary BSS parameters are ALWAYS stored in non-vol.
|
|
This object value is stored in non-vol and set to false
|
|
after factory reset."
|
|
::= { saRgDot11ExtMgmtEntry 16 }
|
|
|
|
saRgDot11ExtMbssAdminControl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8|65536..16711680)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the number of admin controlled Wifi networks via web pages.
|
|
1: The admin has control over the primary wireless network only.
|
|
No guest network page is displayed.
|
|
2: The admin has control over the primary wireless network and
|
|
one guest network. No drop down menu (or only 1 item in the
|
|
menu) for additional guest network configuration.
|
|
3: Same as above with 2 guest networks.
|
|
4: Same as above with 3 guest networks.
|
|
5: Same as above with 4 guest networks.
|
|
6: Same as above with 5 guest networks.
|
|
7: Same as above with 6 guest networks.
|
|
8: Same as above with 7 guest networks.
|
|
|
|
Bit 16: -- Admin Has control over Primary Wireless Network : 65536
|
|
Bit 17: -- Admin Has control over Guest Network 1 (interface 33) : 131072
|
|
Bit 18: -- Admin Has control over Guest Network 2 (interface 34) : 262144
|
|
Bit 19: -- Admin Has control over Guest Network 3 (interface 35) : 524288
|
|
Bit 20: -- Admin Has control over Guest Network 4 (interface 36) :1048576
|
|
Bit 21: -- Admin Has control over Guest Network 5 (interface 37) :2097152
|
|
Bit 22: -- Admin Has control over Guest Network 6 (interface 38) :4194304
|
|
Bit 23: -- Admin Has control over Guest Network 7 (interface 39) :8388608
|
|
|
|
This object value is stored in non-vol and set to 1
|
|
after factory reset."
|
|
|
|
::= { saRgDot11ExtMgmtEntry 17 }
|
|
|
|
saRgDot11ExtActualChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reports the current channel number that wireless is on.
|
|
The value of 0 means wireless is disabled."
|
|
::= { saRgDot11ExtMgmtEntry 18 }
|
|
|
|
|
|
-- saRgDot11ApplySettings: do 'on the fly' config with settings from above.
|
|
-- This scalar object was placed by itself at ieee802saRgDot11Mgmt 100 because
|
|
-- it applies all settings from all current and possibly future 802.11
|
|
-- groups. Wanted to leave plenty of room to add new groups in the future.
|
|
|
|
saRgDot11ApplySettings OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), then all the settings (MIB values)
|
|
from this MIB tree will be applied to run time configuration,
|
|
modifying previous RG operation with the new settings.
|
|
Before setting the value to true, MIBs modified in the MIB
|
|
tree are stored in non-vol and will not modify RG operation
|
|
until saRgDot11ApplySettings is set to true or CM resets.
|
|
Note: this applies only to the MIB objects that are stored
|
|
in non-vol.
|
|
Always returns false(2) when read."
|
|
::= { saRgDot11 1001 }
|
|
|
|
|
|
-- =============
|
|
-- IP management
|
|
-- =============
|
|
|
|
saRgIpMgmt OBJECT IDENTIFIER ::= { saRg 3 }
|
|
|
|
|
|
-- { saRgIpMgmt 1 } reserved for WAN IP definition (currently only DHCP)
|
|
|
|
|
|
-- LAN NETWORK DEFINITIONS
|
|
|
|
saRgIpMgmtLanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgIpMgmtLanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Networks on the LAN side.
|
|
Primary BSS stored in non-vol."
|
|
::= { saRgIpMgmt 2 }
|
|
|
|
saRgIpMgmtLanEntry OBJECT-TYPE
|
|
SYNTAX SaRgIpMgmtLanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of networks on the LAN side."
|
|
INDEX { ifIndex }
|
|
::= { saRgIpMgmtLanTable 1 }
|
|
|
|
SaRgIpMgmtLanEntry ::= SEQUENCE {
|
|
saRgIpMgmtLanMode INTEGER,
|
|
saRgIpMgmtLanNetwork IpAddress,
|
|
saRgIpMgmtLanNetworksAllow INTEGER,
|
|
saRgIpMgmtLanSubnetMask IpAddress,
|
|
saRgIpMgmtLanGateway IpAddress,
|
|
saRgIpMgmtLanDhcpServer INTEGER,
|
|
saRgIpMgmtLanNapt INTEGER,
|
|
saRgIpMgmtLanTypeOfService INTEGER,
|
|
saRgIpMgmtLanDhcp125Option INTEGER,
|
|
saRgIpMgmtLanUpnp INTEGER,
|
|
saRgIpMgmtLanDhcpOption43 SnmpAdminString
|
|
}
|
|
|
|
saRgIpMgmtLanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bridge(1),
|
|
router(2),
|
|
l2tpv2-client(3),
|
|
mixed(4),
|
|
vlan(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the mode of operation for the device.
|
|
Setting this object via SNMP for the primary BSS will cause
|
|
the unit to reboot.
|
|
Setting this object via SNMP for the secondary BSSs will not
|
|
cause the unit to reboot.
|
|
The value for primary BSS is stored in non-vol and is router
|
|
after factory reset.
|
|
The default value for other BSSs is router.
|
|
This MIB supersedes saRgDeviceMode for the .32 interface.
|
|
l2tpv2-client(3)is obsoleted and NOT supported.
|
|
|
|
bridge(1): Sets individual interface to bridging mode
|
|
(for IPv6 interfaces DHCPv6 is external)
|
|
router(2): Sets individual interface to routing mode
|
|
(for IPv6 interfaces DHCPv6 is internal)
|
|
l2tpv2-client(3): <obsolete>
|
|
mixed(4): For mixed mode. This setting is applicable only to
|
|
.32 interface. This value is used on conjunction with
|
|
saRgIpMgmtLanPortControlTable
|
|
*Note: mixed(4) mode NOT Supported by DOCSIS 2.0 products.
|
|
vlan (5): Enables the vlan control feature.
|
|
See saRgVlanTable MIBs for VLAN configuration information."
|
|
DEFVAL { 2 }
|
|
::= { saRgIpMgmtLanEntry 1 }
|
|
|
|
saRgIpMgmtLanNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LAN-Trans network number.
|
|
Default for primary BSS is 192.168.0.0
|
|
Default for other BSSs is 192.168.ifIndex.0"
|
|
::= { saRgIpMgmtLanEntry 3 }
|
|
|
|
|
|
saRgIpMgmtLanNetworksAllow OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
anyPrivateClass(1),
|
|
anyClass(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the user via the internal Web GUI (Lan Setup page
|
|
to input an IPv4 public or private Local IP address other than a
|
|
class C Private address (the default Network for the Primary BSS = 192.168.0.0/24, with
|
|
the default Local Ip address = 192.168.0.1.)
|
|
In all cases the mask must be 255.255.255.x since the RG is limited to supporting
|
|
a maximum of 253 IP addresses.
|
|
(See RFC1918 for a description of private IP addresses and specified ranges.)
|
|
Available Mib settings:
|
|
default(0): Only the third and fourth octets are editable in
|
|
the Web GUI for the Local IP address (Ex. 192.168.x.x/24).
|
|
anyPrivateClass(1): All 4 octets are editable in the Web GUI for Local IP address, but
|
|
the network specified must be a Private class A, B or C network address.
|
|
(Ex. A=10.x.x.x, B=172.16.x.x, C=192.168.x.x).
|
|
anyClass(2): All 4 octets are editable in the Web GUI for Local IP address, and
|
|
the network specified could be any public or private class A, B, or C address.
|
|
|
|
If the MSO specifically sets a Local IP address in saRgIpMgmtLanNetwork to a value other than
|
|
the default value (for example: 192.168.0.1) then these fields will be uneditable by the user (grayed out)."
|
|
DEFVAL { 0 }
|
|
::= { saRgIpMgmtLanEntry 4 }
|
|
|
|
saRgIpMgmtLanSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The device MUST provide the value of this MIB
|
|
object in the Option 1 (Subnet Mask) of
|
|
DHCP OFFER and ACK messages sent to a LAN IP Device."
|
|
DEFVAL { 'ffffff00'h } -- 255.255.255.0
|
|
::= { saRgIpMgmtLanEntry 5 }
|
|
|
|
saRgIpMgmtLanGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this address is specified by
|
|
saRgIpMgmtLanNetwokRouterType. The PS MUST
|
|
provide the value of this MIB object in the
|
|
Option 3 (Router IP address) of the DHCP
|
|
OFFER and ACK messages sent to the LAN IP Device.
|
|
Default for primary BSS is 192.168.0.1
|
|
Default for other BSSs is 192.168.ifIndex.1"
|
|
::= { saRgIpMgmtLanEntry 7 }
|
|
|
|
saRgIpMgmtLanDhcpServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for primary BSS is stored in non-vol.
|
|
The default value for other BSSs is:
|
|
Enabled by default if interface is in router mode.
|
|
Always disabled if interface is in bridge mode."
|
|
::= { saRgIpMgmtLanEntry 8 }
|
|
|
|
saRgIpMgmtLanNapt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for primary BSS is stored in non-vol.
|
|
The default value for other BSSs is:
|
|
Enabled by default if interface is in router mode.
|
|
Always disabled if interface is in bridge mode."
|
|
::= { saRgIpMgmtLanEntry 9 }
|
|
|
|
saRgIpMgmtLanTypeOfService OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Definition of the TOS bits for the Network.
|
|
This object does not apply to primary BSS."
|
|
DEFVAL { 0 }
|
|
::= { saRgIpMgmtLanEntry 10 }
|
|
|
|
saRgIpMgmtLanDhcp125Option OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
addSsidName(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This option controls if the RG adds a Cisco specific
|
|
suboption (number 17) to DHCP DISCOVER and REQUEST
|
|
from the clients that are bridged on the BSS:
|
|
0: do not add the option
|
|
1: add suboption 17 to Cisco specific enterprise-id
|
|
(9) within DHCP option 125. The content is the SSID name."
|
|
DEFVAL { 0 }
|
|
::= { saRgIpMgmtLanEntry 11 }
|
|
|
|
saRgIpMgmtLanUpnp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable the UPnP agent.
|
|
The value is stored in non-vol and is disabled after factory default for the primary SSID.
|
|
The UPnP agents for additional networks are enabled by default.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { saRgIpMgmtLanEntry 13 }
|
|
|
|
saRgIpMgmtLanDhcpOption43 OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If option 60 is set from the CPE then return this value in option 43 of the DHCP Reply.
|
|
If this value is null then do not reply with option 43 (default is null)
|
|
This MIB will apply to the Primary SSID (intface .32) only"
|
|
::= { saRgIpMgmtLanEntry 14 }
|
|
|
|
-- LAN DHCP SERVERS DEFINITIONS
|
|
|
|
saRgIpMgmtLanDhcpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgIpMgmtLanDhcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Networks on the LAN side.
|
|
Stored in non-vol. .10-.128 for primary BSS
|
|
after factory reset."
|
|
::= { saRgIpMgmt 3 }
|
|
|
|
saRgIpMgmtLanDhcpServerEntry OBJECT-TYPE
|
|
SYNTAX SaRgIpMgmtLanDhcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of networks on the LAN side."
|
|
INDEX { ifIndex }
|
|
::= { saRgIpMgmtLanDhcpServerTable 1 }
|
|
|
|
SaRgIpMgmtLanDhcpServerEntry ::= SEQUENCE {
|
|
saRgIpMgmtLanDhcpServerPoolStart IpAddress,
|
|
saRgIpMgmtLanDhcpServerPoolEnd IpAddress,
|
|
saRgIpMgmtLanDhcpServerLeaseTime Unsigned32,
|
|
}
|
|
|
|
|
|
saRgIpMgmtLanDhcpServerPoolStart OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start of range LAN Trans IP Addresses. The type of
|
|
this address is specified by saRgIpMgmtLanDhcpServerPoolStartType.
|
|
Default value depends on IP network and subnet."
|
|
::= { saRgIpMgmtLanDhcpServerEntry 2 }
|
|
|
|
saRgIpMgmtLanDhcpServerPoolEnd OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of range for LAN-Trans IP Addresses. The type of
|
|
this address is specified by saRgIpMgmtLanDhcpServerPoolEndType.
|
|
Default value depends on IP network and subnet."
|
|
::= { saRgIpMgmtLanDhcpServerEntry 4 }
|
|
|
|
saRgIpMgmtLanDhcpServerLeaseTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PS MUST provide the value of this MIB object in the
|
|
Option 51 (IP Address lease time) of the DHCP OFFER and
|
|
ACK messages sent to the LAN IP Device."
|
|
DEFVAL { 3600 }
|
|
::= { saRgIpMgmtLanDhcpServerEntry 5 }
|
|
|
|
--====================================================================
|
|
--
|
|
-- saRgIpMgmtLanAddrTable (CDP LAN Address Table)
|
|
--
|
|
-- The saRgIpMgmtLanAddrTable contains the DHCP parameters
|
|
-- for each IP address served to the LAN-Trans realm.
|
|
--
|
|
--=========================================================================
|
|
|
|
saRgIpMgmtLanAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgIpMgmtLanAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP addresses of devices served by DHCP servers."
|
|
::= { saRgIpMgmt 4 }
|
|
|
|
saRgIpMgmtLanAddrEntry OBJECT-TYPE
|
|
SYNTAX SaRgIpMgmtLanAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of general parameters pertaining to LAN-Trans IP
|
|
address reservations and leases."
|
|
INDEX { ifIndex, saRgIpMgmtLanAddrIndex }
|
|
::= { saRgIpMgmtLanAddrTable 1 }
|
|
|
|
SaRgIpMgmtLanAddrEntry ::= SEQUENCE {
|
|
saRgIpMgmtLanAddrIndex INTEGER,
|
|
saRgIpMgmtLanAddrIp IpAddress,
|
|
saRgIpMgmtLanAddrPhysAddr PhysAddress,
|
|
saRgIpMgmtLanAddrLeaseCreateTime DateAndTime,
|
|
saRgIpMgmtLanAddrLeaseExpireTime DateAndTime,
|
|
saRgIpMgmtLanAddrHostName SnmpAdminString,
|
|
saRgIpMgmtLanAddrClientId SnmpAdminString,
|
|
saRgIpMgmtLanAddrInterface SnmpAdminString,
|
|
saRgIpMgmtLanAddrClientNotes SnmpAdminString,
|
|
saRgIpMgmtLanAddrCpeStatus INTEGER,
|
|
saRgIpMgmtLanAddrSignalStrength Integer32,
|
|
saRgIpMgmtLanAddrRequestedOptionsList OCTET STRING,
|
|
saRgIpMgmtLanAddrParameterRequestList OCTET STRING
|
|
|
|
}
|
|
|
|
saRgIpMgmtLanAddrIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the the LAN IP Device in the LAN-Trans Realm."
|
|
::= { saRgIpMgmtLanAddrEntry 1 }
|
|
|
|
saRgIpMgmtLanAddrIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgIpMgmtLanAddrEntry 3 }
|
|
|
|
saRgIpMgmtLanAddrPhysAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The client's (i.e., LAN IP Device's) hardware address as
|
|
indicated in the chaddr field of its DHCP REQUEST message."
|
|
::= { saRgIpMgmtLanAddrEntry 4 }
|
|
|
|
saRgIpMgmtLanAddrLeaseCreateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the date and time when the LAN IP lease was
|
|
created (if it has not yet been renewed) or last renewed."
|
|
::= { saRgIpMgmtLanAddrEntry 5 }
|
|
|
|
saRgIpMgmtLanAddrLeaseExpireTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the date and time when the LAN IP address lease
|
|
expired or will expire."
|
|
::= { saRgIpMgmtLanAddrEntry 6 }
|
|
|
|
|
|
saRgIpMgmtLanAddrHostName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Host Name of the LAN IP address, based on DCHP
|
|
option 12."
|
|
::= { saRgIpMgmtLanAddrEntry 7 }
|
|
|
|
saRgIpMgmtLanAddrClientId OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Client Class Identifier, based on DHCP option 60."
|
|
::= { saRgIpMgmtLanAddrEntry 8 }
|
|
|
|
saRgIpMgmtLanAddrInterface OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will show the associated interface (LAN, WiFi or MoCA) of the connected CPE."
|
|
::= { saRgIpMgmtLanAddrEntry 9 }
|
|
|
|
|
|
--===================================================================
|
|
--
|
|
-- saRgIpMgmtDnsServerTable (CDP WAN DNS Server Table)
|
|
--
|
|
-- The saRgIpMgmtDnsServerTable is a table of 3 cable network
|
|
-- and Internet DNS Servers.
|
|
--
|
|
--===================================================================
|
|
|
|
saRgIpMgmtDnsServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgIpMgmtDnsServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the IP addresses of cable network and
|
|
Internet DNS servers, in the order of preference in which
|
|
the PS's CNP will query them, when it cannot resolve a DNS
|
|
query using local information. Entries in this table are
|
|
updated with the information contained in DHCP Option 6,
|
|
received during both the WAN-Man and WAN-Data IP
|
|
acquisition processes.
|
|
Stored in non-vol and 0.0.0.0 for all servers after
|
|
factory reset."
|
|
::= { saRgIpMgmt 5 }
|
|
|
|
saRgIpMgmtDnsServerEntry OBJECT-TYPE
|
|
SYNTAX SaRgIpMgmtDnsServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of cable network and Internet DNS servers."
|
|
INDEX { saRgIpMgmtDnsServerOrder }
|
|
::= { saRgIpMgmtDnsServerTable 1 }
|
|
|
|
SaRgIpMgmtDnsServerEntry ::= SEQUENCE {
|
|
saRgIpMgmtDnsServerOrder INTEGER,
|
|
saRgIpMgmtDnsServerIp IpAddress,
|
|
saRgIpMgmtDnsServerIpv6 InetAddress
|
|
}
|
|
|
|
saRgIpMgmtDnsServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter indicates the IP address of a WAN DNS
|
|
server."
|
|
::= { saRgIpMgmtDnsServerEntry 3 }
|
|
|
|
|
|
--==============================
|
|
-- LAN DHCP fixed IP assignments
|
|
--==============================
|
|
|
|
saRgIpMgmtDhcpFixedIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgIpMgmtDhcpFixedIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fixed IP address assignments for DHCP server.
|
|
Table does not return any row if DHCP disabled.
|
|
The value for primary BSS is stored in non-vol."
|
|
::= { saRgIpMgmt 6 }
|
|
|
|
saRgIpMgmtDhcpFixedIpEntry OBJECT-TYPE
|
|
SYNTAX SaRgIpMgmtDhcpFixedIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of general parameters pertaining to LAN-Trans IP
|
|
address reservations and leases."
|
|
INDEX { ifIndex, saRgIpMgmtDhcpFixedIpIndex }
|
|
::= { saRgIpMgmtDhcpFixedIpTable 1 }
|
|
|
|
SaRgIpMgmtDhcpFixedIpEntry ::= SEQUENCE {
|
|
saRgIpMgmtDhcpFixedIpIndex INTEGER,
|
|
saRgIpMgmtDhcpFixedIpRowStatus RowStatus,
|
|
saRgIpMgmtDhcpFixedIpAddress IpAddress,
|
|
saRgIpMgmtDhcpFixedIpPhysAddr PhysAddress,
|
|
saRgIpMgmtDhcpFixedIpHostName SnmpAdminString
|
|
}
|
|
|
|
saRgIpMgmtDhcpFixedIpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the the LAN IP Device in the LAN-Trans Realm."
|
|
::= { saRgIpMgmtDhcpFixedIpEntry 1 }
|
|
|
|
saRgIpMgmtDhcpFixedIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status. A row can be destroyed."
|
|
::= { saRgIpMgmtDhcpFixedIpEntry 2 }
|
|
|
|
saRgIpMgmtDhcpFixedIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgIpMgmtDhcpFixedIpEntry 4 }
|
|
|
|
saRgIpMgmtDhcpFixedIpPhysAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The client's (i.e., LAN IP Device's) hardware address as
|
|
indicated in the chaddr field of its DHCP REQUEST message."
|
|
::= { saRgIpMgmtDhcpFixedIpEntry 5 }
|
|
|
|
saRgIpMgmtDhcpFixedIpHostName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Host Name of the LAN IP address, based on DCHP
|
|
option 12."
|
|
::= { saRgIpMgmtDhcpFixedIpEntry 6 }
|
|
|
|
-- ==============
|
|
-- Static routing
|
|
|
|
saRgIpMgmtStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgIpMgmtStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static route entries in the routing table.
|
|
This table is saved in non-vol and is empty
|
|
after factory reset."
|
|
::= { saRgIpMgmt 8 }
|
|
|
|
saRgIpMgmtStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX SaRgIpMgmtStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of static route entries in the routing table."
|
|
INDEX { saRgIpMgmtStaticRouteIndex }
|
|
::= { saRgIpMgmtStaticRouteTable 1 }
|
|
|
|
SaRgIpMgmtStaticRouteEntry ::= SEQUENCE {
|
|
saRgIpMgmtStaticRouteIndex INTEGER,
|
|
saRgIpMgmtStaticRouteRowStatus RowStatus,
|
|
saRgIpMgmtStaticRouteNetwork IpAddress,
|
|
saRgIpMgmtStaticRouteSubnetMask IpAddress,
|
|
saRgIpMgmtStaticRouteGateway IpAddress,
|
|
saRgIpMgmtStaticRouteRipAdvertise TruthValue
|
|
}
|
|
|
|
saRgIpMgmtStaticRouteIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the the table."
|
|
::= { saRgIpMgmtStaticRouteEntry 1 }
|
|
|
|
saRgIpMgmtStaticRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { saRgIpMgmtStaticRouteEntry 2 }
|
|
|
|
saRgIpMgmtStaticRouteNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static route IP network definition"
|
|
::= { saRgIpMgmtStaticRouteEntry 3 }
|
|
|
|
saRgIpMgmtStaticRouteSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static route network mask definition"
|
|
::= { saRgIpMgmtStaticRouteEntry 4 }
|
|
|
|
saRgIpMgmtStaticRouteGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gateway to the network defined in
|
|
saRgIpMgmtStaticRouteNetwork and
|
|
saRgIpMgmtStaticRouteSubnetMask."
|
|
::= { saRgIpMgmtStaticRouteEntry 5 }
|
|
|
|
saRgIpMgmtStaticRouteRipAdvertise OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), then static route entry
|
|
will be advertised in RIP."
|
|
DEFVAL { false }
|
|
::= { saRgIpMgmtStaticRouteEntry 6 }
|
|
|
|
-- WAN interface
|
|
|
|
saRgIpMgmtWanAddr OBJECT IDENTIFIER ::= { saRgIpMgmt 9 }
|
|
|
|
saRgIpMgmtWanAddrBase OBJECT IDENTIFIER ::= { saRgIpMgmtWanAddr 1 }
|
|
|
|
saRgIpMgmtWanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dhcp(1),
|
|
static(2),
|
|
dualIp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When dualIp(3) is selected, the second IP stack is used for
|
|
user operations.
|
|
Stored in non-vol, dhcp(1) after factory reset."
|
|
::= { saRgIpMgmtWanAddrBase 1 }
|
|
|
|
saRgIpMgmtWanMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1500)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MTU size for the IP layer. Valid range is 256 to 1500.
|
|
0 is the default which is 1500.
|
|
Stored in non-vol, 0 after factory reset."
|
|
::= { saRgIpMgmtWanAddrBase 2 }
|
|
|
|
saRgIpMgmtWanTtl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
UNITS "hops"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TTL for the IP packets forwarded to WAN.
|
|
0 means no change to the original TTL (after
|
|
being decreased by 1).
|
|
Stored in non-vol, 0 after factory reset."
|
|
::= { saRgIpMgmtWanAddrBase 3 }
|
|
|
|
saRgIpMgmtWanAddrStatic OBJECT IDENTIFIER ::= { saRgIpMgmtWanAddr 3 }
|
|
|
|
saRgIpMgmtWanStaticNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stored in non-vol, 0.0.0.0 after factory reset."
|
|
::= { saRgIpMgmtWanAddrStatic 1 }
|
|
|
|
saRgIpMgmtWanStaticSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stored in non-vol, 0.0.0.0 after factory reset."
|
|
::= { saRgIpMgmtWanAddrStatic 2 }
|
|
|
|
saRgIpMgmtWanStaticGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stored in non-vol, 0.0.0.0 after factory reset."
|
|
::= { saRgIpMgmtWanAddrStatic 3 }
|
|
|
|
|
|
saRgIpMgmtWanAddrDualIp OBJECT IDENTIFIER ::= { saRgIpMgmtWanAddr 4 }
|
|
|
|
saRgIpMgmtWanDualIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address for the second IP stack.
|
|
If not specified and saRgIpMgmtWanMode is set to
|
|
dualIp(3), DHCP is used to acquire the IP address.
|
|
Note: this object can only be set from config file."
|
|
DEFVAL { '00000000'h }
|
|
::= { saRgIpMgmtWanAddrDualIp 1 }
|
|
|
|
saRgIpMgmtWanDualIpRipAdvertised OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies if the IP address is to be advertised in RIP,
|
|
if RIP is enabled.
|
|
Note: this object can only be set from config file."
|
|
DEFVAL { true }
|
|
::= { saRgIpMgmtWanAddrDualIp 2 }
|
|
|
|
saRgIpMgmtLanExtraSubnetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgIpMgmtLanExtraSubnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Additional IP addresses for primary LAN interface.
|
|
If RIP is enabled, all subnets are advertised.
|
|
All objects are stored in non-vol. The table
|
|
is empty after factory reset."
|
|
::= { saRgIpMgmt 11 }
|
|
|
|
saRgIpMgmtLanExtraSubnetEntry OBJECT-TYPE
|
|
SYNTAX SaRgIpMgmtLanExtraSubnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of networks on the LAN side."
|
|
INDEX { ifIndex }
|
|
::= { saRgIpMgmtLanExtraSubnetTable 1 }
|
|
|
|
SaRgIpMgmtLanExtraSubnetEntry ::= SEQUENCE {
|
|
saRgIpMgmtLanExtraSubnetIndex INTEGER,
|
|
saRgIpMgmtLanExtraSubnetRowStatus RowStatus,
|
|
saRgIpMgmtLanExtraSubnetIpAddress IpAddress,
|
|
saRgIpMgmtLanExtraSubnetSubnetMask IpAddress,
|
|
saRgIpMgmtLanExtraSubnetGateway IpAddress
|
|
}
|
|
|
|
saRgIpMgmtLanExtraSubnetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
secondSubnet(1),
|
|
thirdSubnet(2),
|
|
fourthSubnet(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the instance of this table row."
|
|
::= { saRgIpMgmtLanExtraSubnetEntry 1 }
|
|
|
|
saRgIpMgmtLanExtraSubnetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status."
|
|
::= { saRgIpMgmtLanExtraSubnetEntry 2 }
|
|
|
|
saRgIpMgmtLanExtraSubnetIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgIpMgmtLanExtraSubnetEntry 3 }
|
|
|
|
saRgIpMgmtLanExtraSubnetSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
DEFVAL { 'ffffff00'h } -- 255.255.255.0
|
|
::= { saRgIpMgmtLanExtraSubnetEntry 4 }
|
|
|
|
saRgIpMgmtLanExtraSubnetGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgIpMgmtLanExtraSubnetEntry 5 }
|
|
|
|
-- **********************
|
|
-- LAN PORT Control Table
|
|
-- **********************
|
|
saRgIpMgmtLanPortControl OBJECT IDENTIFIER ::= { saRgIpMgmt 13 }
|
|
|
|
|
|
saRgIpMgmtLanPortControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgIpMgmtLanPortControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to control the mode for each LAN PORT.
|
|
LAN PORTs are numbered 1-4 and are mapped to physical
|
|
port location. Each port can either be in router or
|
|
in bridge mode."
|
|
::= { saRgIpMgmtLanPortControl 1 }
|
|
|
|
saRgIpMgmtLanPortControlEntry OBJECT-TYPE
|
|
SYNTAX SaRgIpMgmtLanPortControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { saRgIpMgmtLanPortControlIndex }
|
|
::= { saRgIpMgmtLanPortControlTable 1 }
|
|
|
|
SaRgIpMgmtLanPortControlEntry ::= SEQUENCE {
|
|
saRgIpMgmtLanPortControlIndex INTEGER,
|
|
saRgIpMgmtLanPortMode INTEGER
|
|
}
|
|
|
|
saRgIpMgmtLanPortControlIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index for each LAN port"
|
|
::= { saRgIpMgmtLanPortControlEntry 1 }
|
|
|
|
saRgIpMgmtLanPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bridge (1),
|
|
router (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each physical LAN port can either be controlled
|
|
as bridge or router. The saRgIpMgmtLanPortMode MIB only works
|
|
when SaRgIpMgmtLanMode.32=4(Mixed). Setting this MIB
|
|
through SNMP will take effect only after
|
|
saRgIpMgmtApplySettings.0 set to true and this setting will
|
|
reboot to take effect"
|
|
::= { saRgIpMgmtLanPortControlEntry 2 }
|
|
|
|
-- Apply setting to activate chagnes:
|
|
saRgIpMgmtApplySettings OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), then all the settings (MIB values)
|
|
from this MIB tree will be applied to run time configuration,
|
|
modifying previous RG operation with the new settings.
|
|
Before setting the value to true, MIBs modified in the MIB
|
|
tree are stored in non-vol and will not modify RG operation
|
|
until saRgIpMgmtApplySettings is set to true or CM resets.
|
|
Note: this applies only to the MIB objects that are stored
|
|
in non-vol.
|
|
Always returns false(2) when read."
|
|
::= { saRgIpMgmt 1001 }
|
|
|
|
|
|
|
|
-- =============================================
|
|
-- FIREWALL
|
|
--
|
|
-- Also includes port tiggering, forwarding, DMZ
|
|
-- =============================================
|
|
|
|
saRgFirewall OBJECT IDENTIFIER ::= { saRg 4 }
|
|
|
|
saRgFirewallReport OBJECT IDENTIFIER ::= { saRgFirewall 4 }
|
|
|
|
saRgFirewallReportEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgFirewallReportEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is stored in non-vol and is empty
|
|
after factory reset."
|
|
::= { saRgFirewallReport 1 }
|
|
|
|
saRgFirewallReportEventEntry OBJECT-TYPE
|
|
SYNTAX SaRgFirewallReportEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { saRgFirewallReportEventIndex }
|
|
::= { saRgFirewallReportEventTable 1 }
|
|
|
|
SaRgFirewallReportEventEntry ::= SEQUENCE {
|
|
saRgFirewallReportEventIndex INTEGER,
|
|
saRgFirewallReportEventDescription SnmpAdminString,
|
|
saRgFirewallReportEventCount INTEGER,
|
|
saRgFirewallReportEventLastOccurance SnmpAdminString,
|
|
saRgFirewallReportEventTarget SnmpAdminString,
|
|
saRgFirewallReportEventSource SnmpAdminString
|
|
}
|
|
|
|
saRgFirewallReportEventIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgFirewallReportEventEntry 1 }
|
|
|
|
saRgFirewallReportEventDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallReportEventEntry 2 }
|
|
|
|
saRgFirewallReportEventCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallReportEventEntry 3 }
|
|
|
|
saRgFirewallReportEventLastOccurance OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallReportEventEntry 4 }
|
|
|
|
saRgFirewallReportEventTarget OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallReportEventEntry 5 }
|
|
|
|
saRgFirewallReportEventSource OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallReportEventEntry 6 }
|
|
|
|
|
|
saRgFirewallReportMgmt OBJECT IDENTIFIER ::= { saRgFirewallReport 2 }
|
|
|
|
saRgFirewallReportMgmtClearLog OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Note: this object does not need saRgFirewallApplySettings
|
|
to take effect."
|
|
DEFVAL { false }
|
|
::= { saRgFirewallReportMgmt 1 }
|
|
|
|
saRgFirewallReportEmailLogNow OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Triggers sending currect logs via email. Always returns false.
|
|
Note: this objects does not need saRgFirewallApplySettings to
|
|
send the logs."
|
|
DEFVAL { false }
|
|
::= { saRgFirewallReportMgmt 2 }
|
|
|
|
|
|
saRgFirewallReportEmail OBJECT IDENTIFIER ::= { saRgFirewallReport 3 }
|
|
|
|
saRgFirewallReportEmailEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables sending logs via email. Email is sent when an event happens."
|
|
::= { saRgFirewallReportEmail 1 }
|
|
|
|
saRgFirewallReportEmailAddress OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is stored in non-vol and is empty after factory reset."
|
|
::= { saRgFirewallReportEmail 2 }
|
|
|
|
saRgFirewallReportEmailSmtpServer OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address or FQDN.
|
|
Stored in non-vol. Empty after factory reset."
|
|
::= { saRgFirewallReportEmail 3 }
|
|
|
|
saRgFirewallReportEmailUsername OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is stored in non-vol and is empty after factory reset."
|
|
::= { saRgFirewallReportEmail 4 }
|
|
|
|
saRgFirewallReportEmailPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is stored in non-vol and is empty after factory reset."
|
|
::= { saRgFirewallReportEmail 5 }
|
|
|
|
|
|
-- Firewall IP filtering
|
|
|
|
saRgFirewallRules OBJECT IDENTIFIER ::= { saRgFirewall 5 }
|
|
|
|
saRgFirewallIpFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgFirewallIpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is stored in non-vol and is empty
|
|
after factory reset."
|
|
::= { saRgFirewallRules 1 }
|
|
|
|
saRgFirewallIpFilterEntry OBJECT-TYPE
|
|
SYNTAX SaRgFirewallIpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { saRgFirewallIpFilterIndex }
|
|
::= { saRgFirewallIpFilterTable 1 }
|
|
|
|
SaRgFirewallIpFilterEntry ::= SEQUENCE {
|
|
saRgFirewallIpFilterIndex INTEGER,
|
|
saRgFirewallIpFilterRowStatus RowStatus,
|
|
saRgFirewallIpFilterAddressStart IpAddress,
|
|
saRgFirewallIpFilterAddressEnd IpAddress,
|
|
saRgFirewallIpFilterTrusted INTEGER,
|
|
saRgFirewallIpFilterPolicy INTEGER
|
|
}
|
|
|
|
saRgFirewallIpFilterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgFirewallIpFilterEntry 1 }
|
|
|
|
saRgFirewallIpFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status. A row can be destroyed.
|
|
If the row is not used, set to notInService."
|
|
::= { saRgFirewallIpFilterEntry 2 }
|
|
|
|
saRgFirewallIpFilterAddressStart OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallIpFilterEntry 3 }
|
|
|
|
saRgFirewallIpFilterAddressEnd OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallIpFilterEntry 4 }
|
|
|
|
saRgFirewallPortFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgFirewallPortFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is stored in non-vol and is empty
|
|
after factory reset."
|
|
::= { saRgFirewallRules 2 }
|
|
|
|
saRgFirewallPortFilterEntry OBJECT-TYPE
|
|
SYNTAX SaRgFirewallPortFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { saRgFirewallPortFilterIndex }
|
|
::= { saRgFirewallPortFilterTable 1 }
|
|
|
|
SaRgFirewallPortFilterEntry ::= SEQUENCE {
|
|
saRgFirewallPortFilterIndex INTEGER,
|
|
saRgFirewallPortFilterRowStatus RowStatus,
|
|
saRgFirewallPortFilterPortStart InetPortNumber,
|
|
saRgFirewallPortFilterPortEnd InetPortNumber,
|
|
saRgFirewallPortFilterProto INTEGER,
|
|
saRgFirewallPortFilterAlwaysBlock TruthValue,
|
|
saRgFirewallPortFilterBlockStartTime OCTET STRING,
|
|
saRgFirewallPortFilterBlockEndTime OCTET STRING,
|
|
saRgFirewallPortFilterBlockDays BITS
|
|
}
|
|
|
|
saRgFirewallPortFilterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgFirewallPortFilterEntry 1 }
|
|
|
|
saRgFirewallPortFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status. A row can be destroyed.
|
|
If the row is not used, set to notInService."
|
|
::= { saRgFirewallPortFilterEntry 2 }
|
|
|
|
saRgFirewallPortFilterPortStart OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallPortFilterEntry 5 }
|
|
|
|
saRgFirewallPortFilterPortEnd OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallPortFilterEntry 6 }
|
|
|
|
saRgFirewallPortFilterProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
udp(1),
|
|
tcp(2),
|
|
udpTcp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP protocol to block."
|
|
DEFVAL { 3 }
|
|
::= { saRgFirewallPortFilterEntry 7 }
|
|
|
|
saRgFirewallMacFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgFirewallMacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of clients MAC addresses that are denied from accessing Internet."
|
|
::= { saRgFirewallRules 3 }
|
|
|
|
saRgFirewallMacFilterEntry OBJECT-TYPE
|
|
SYNTAX SaRgFirewallMacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table that specifies a single station MAC address."
|
|
INDEX { saRgFirewallMacFilterIndex }
|
|
::= { saRgFirewallMacFilterTable 1 }
|
|
|
|
SaRgFirewallMacFilterEntry ::=
|
|
SEQUENCE {
|
|
saRgFirewallMacFilterIndex INTEGER,
|
|
saRgFirewallMacFilterRowStatus RowStatus,
|
|
saRgFirewallMacFilterAddress MacAddress,
|
|
saRgFirewallMacFilterAlwaysBlock TruthValue,
|
|
saRgFirewallMacFilterBlockStartTime OCTET STRING,
|
|
saRgFirewallMacFilterBlockEndTime OCTET STRING,
|
|
saRgFirewallMacFilterBlockDays BITS
|
|
}
|
|
|
|
saRgFirewallMacFilterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..20)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgFirewallMacFilterEntry 1 }
|
|
|
|
saRgFirewallMacFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status. A row can be destroyed.
|
|
If the row is not used, set to notInService."
|
|
::= { saRgFirewallMacFilterEntry 2 }
|
|
|
|
saRgFirewallMacFilterAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A MAC address of a station that cannot access Internet."
|
|
::= { saRgFirewallMacFilterEntry 3 }
|
|
|
|
saRgFirewallMacFilterEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True = Enable the Mac address filtering feature. False = disable.
|
|
this Value is written to non-vol and set to false after a factory reset."
|
|
DEFVAL { false }
|
|
::= { saRgFirewallRules 4 }
|
|
|
|
saRgFirewallMacFilterMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
block(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"block(0)- Macs listed in the saRgFirewallMacFilterEntryTable will be blocked.
|
|
permit(1)- Macs listed in the saRgFirewallMacFilterEntryTable will be permitted.
|
|
This value is written to non-vol and is set to block(0) after a factory reset."
|
|
DEFVAL { 0 }
|
|
::= { saRgFirewallRules 5 }
|
|
|
|
-- Port forwarding
|
|
|
|
saRgFirewallPortFwdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgFirewallPortFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is stored in non-vol and is empty
|
|
after factory reset."
|
|
::= { saRgFirewall 6 }
|
|
|
|
saRgFirewallPortFwdEntry OBJECT-TYPE
|
|
SYNTAX SaRgFirewallPortFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { saRgFirewallPortFwdIndex }
|
|
::= { saRgFirewallPortFwdTable 1 }
|
|
|
|
SaRgFirewallPortFwdEntry ::= SEQUENCE {
|
|
saRgFirewallPortFwdIndex INTEGER,
|
|
saRgFirewallPortFwdRowStatus RowStatus,
|
|
saRgFirewallPortFwdToAddress IpAddress,
|
|
saRgFirewallPortFwdPortStart InetPortNumber,
|
|
saRgFirewallPortFwdPortEnd InetPortNumber,
|
|
saRgFirewallPortFwdProto INTEGER,
|
|
saRgFirewallPortFwdSrvcName SnmpAdminString,
|
|
saRgFirewallPortFwdExternalPortStart InetPortNumber,
|
|
saRgFirewallPortFwdExternalPortEnd InetPortNumber
|
|
}
|
|
|
|
saRgFirewallPortFwdIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgFirewallPortFwdEntry 1 }
|
|
|
|
saRgFirewallPortFwdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status. A row can be destroyed.
|
|
If the row is not used, set to notInService."
|
|
::= { saRgFirewallPortFwdEntry 2 }
|
|
|
|
saRgFirewallPortFwdToAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid address must be entered for a row to be created."
|
|
::= { saRgFirewallPortFwdEntry 3 }
|
|
|
|
saRgFirewallPortFwdPortStart OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid port must be entered for a row to be created."
|
|
::= { saRgFirewallPortFwdEntry 4 }
|
|
|
|
saRgFirewallPortFwdPortEnd OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid port must be entered for a row to be created."
|
|
::= { saRgFirewallPortFwdEntry 5 }
|
|
|
|
saRgFirewallPortFwdProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
udp(1),
|
|
tcp(2),
|
|
udpTcp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
DEFVAL { 2 }
|
|
::= { saRgFirewallPortFwdEntry 6 }
|
|
|
|
saRgFirewallPortFwdExternalPortStart OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid port must be entered for a row to be created. This is the outside-facing start port for the portforward."
|
|
::= { saRgFirewallPortFwdEntry 8 }
|
|
|
|
saRgFirewallPortFwdExternalPortEnd OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid port must be entered for a row to be created. This is the outside-facing end port for the portforward."
|
|
::= { saRgFirewallPortFwdEntry 9 }
|
|
|
|
-- Port triggering
|
|
|
|
saRgFirewallPortTrigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SaRgFirewallPortTrigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is stored in non-vol and is empty
|
|
after factory reset."
|
|
::= { saRgFirewall 7 }
|
|
|
|
saRgFirewallPortTrigEntry OBJECT-TYPE
|
|
SYNTAX SaRgFirewallPortTrigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { saRgFirewallPortTrigIndex }
|
|
::= { saRgFirewallPortTrigTable 1 }
|
|
|
|
SaRgFirewallPortTrigEntry ::= SEQUENCE {
|
|
saRgFirewallPortTrigIndex INTEGER,
|
|
saRgFirewallPortTrigRowStatus RowStatus,
|
|
saRgFirewallPortTrigTriggerPortStart InetPortNumber,
|
|
saRgFirewallPortTrigTriggerPortEnd InetPortNumber,
|
|
saRgFirewallPortTrigTargetPortStart InetPortNumber,
|
|
saRgFirewallPortTrigTargetPortEnd InetPortNumber,
|
|
saRgFirewallPortTrigProto INTEGER,
|
|
saRgFirewallPortTrigSrvcName SnmpAdminString
|
|
}
|
|
|
|
saRgFirewallPortTrigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index"
|
|
::= { saRgFirewallPortTrigEntry 1 }
|
|
|
|
saRgFirewallPortTrigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status. A row can be destroyed.
|
|
If the row is not used, set to notInService."
|
|
::= { saRgFirewallPortTrigEntry 2 }
|
|
|
|
|
|
saRgFirewallPortTrigTriggerPortStart OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallPortTrigEntry 3 }
|
|
|
|
saRgFirewallPortTrigTriggerPortEnd OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallPortTrigEntry 4 }
|
|
|
|
saRgFirewallPortTrigTargetPortStart OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallPortTrigEntry 5 }
|
|
|
|
saRgFirewallPortTrigTargetPortEnd OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { saRgFirewallPortTrigEntry 6 }
|
|
|
|
saRgFirewallPortTrigProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
udp(1),
|
|
tcp(2),
|
|
udpTcp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
DEFVAL { 2 }
|
|
::= { saRgFirewallPortTrigEntry 7 }
|
|
|
|
saRgFirewallApplySettings OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), then all the settings (MIB values)
|
|
from this MIB tree will be applied to run time configuration,
|
|
modifying previous RG operation with the new settings.
|
|
Before setting the value to true, MIBs modified in the MIB
|
|
tree are stored in non-vol and will not modify RG operation
|
|
until saRgFirewallApplySettings is set to true or CM resets.
|
|
Note: this applies only to the MIB objects that are stored
|
|
in non-vol.
|
|
Always returns false(2) when read."
|
|
::= { saRgFirewall 1001 }
|
|
|
|
-- ==================================
|
|
-- DS Lite specific information
|
|
-- ==================================
|
|
|
|
saRgDslite OBJECT IDENTIFIER ::= { saRg 12 }
|
|
|
|
saRgDsliteOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
option-64(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB will toggle whether DHCPv6 option 64 is requested in the solicit.
|
|
The option should only be requested if DS Lite is enabled."
|
|
DEFVAL { 1 }
|
|
::= { saRgDslite 1 }
|
|
|
|
saRgDsliteAftrName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB will read/write the remote IPv6 FQDN of the AFTR router in
|
|
the DS Lite tunnel configuration.
|
|
This should only have an effect if eRouter is in IPv6 only mode and DS Lite is enabled."
|
|
::= { saRgDslite 2 }
|
|
|
|
saRgDsliteAftrAddress OBJECT-TYPE
|
|
SYNTAX InetAddressIPv6
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB will set the remote IPv6 address of the AFTR router manually in
|
|
the DS Lite tunnel configuration.
|
|
This should only have an effect if eRouter is in IPv6 only mode and DS Lite is enabled."
|
|
::= { saRgDslite 3 }
|
|
|
|
saRgDsliteTcpMssClamping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1420)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether TCP MSS clamping is enabled on the interface.
|
|
0 disables clamping, 1 clamps the MSS depending on the
|
|
interface MTU. A value > 1 will be used as clamping size.
|
|
This MIB takes effect immediately and does not require saRgDsliteApplySettings."
|
|
DEFVAL { 0 }
|
|
::= { saRgDslite 4 }
|
|
|
|
saRgDsliteApplySettings OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), then all the settings (MIB values)
|
|
from this MIB tree will be applied to the runtime configuration,
|
|
This will resolve the AFTR domain name to the AFTR IPv6 address,
|
|
and initialize the DSlite tunnel. This will initialize using the AFTR
|
|
address if both the address and FQDN are defined.
|
|
This should only activate the tunnel if eRouter is in IPv6 only mode
|
|
and DS Lite is enabled.
|
|
Always returns false(2) when read."
|
|
::= { saRgDslite 1001 }
|
|
|
|
END
|
|
|