Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
909 lines
28 KiB
Text
909 lines
28 KiB
Text
|
|
PIM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, experimental,
|
|
Integer32, IpAddress, TimeTicks FROM SNMPv2-SMI
|
|
RowStatus, TruthValue FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
ipMRouteGroup, ipMRouteSource,
|
|
ipMRouteSourceMask, ipMRouteNextHopGroup,
|
|
ipMRouteNextHopSource, ipMRouteNextHopSourceMask,
|
|
ipMRouteNextHopIfIndex,
|
|
ipMRouteNextHopAddress FROM IPMROUTE-STD-MIB
|
|
InterfaceIndex FROM IF-MIB;
|
|
|
|
pimMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9907231200Z" -- July 23, 1999
|
|
ORGANIZATION "IETF IDMR Working Group."
|
|
CONTACT-INFO
|
|
" Dave Thaler
|
|
Microsoft Corporation
|
|
One Microsoft Way
|
|
Redmond, WA 98052-6399
|
|
US
|
|
|
|
Phone: +1 425 703 8835
|
|
EMail: dthaler@dthaler.microsoft.com"
|
|
DESCRIPTION
|
|
"The MIB module for management of PIM routers."
|
|
REVISION "9907231200Z" -- July 23, 1999
|
|
DESCRIPTION
|
|
"Initial version, published as RFC xxxx (to be filled in by
|
|
RFC-Editor)."
|
|
-- ::= { mib-2 xx }
|
|
|
|
::= { experimental 61 } -- $$$ This value to be changed later !!!
|
|
|
|
-- NOTE TO RFC EDITOR: When this document is published as an
|
|
-- RFC, replace XX with IANA assignment, and delete this comment.
|
|
|
|
pimMIBObjects OBJECT IDENTIFIER ::= { pimMIB 1 }
|
|
|
|
pim OBJECT IDENTIFIER ::= { pimMIBObjects 1 }
|
|
|
|
pimJoinPruneInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
|
|
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default interval at which periodic PIM-SM Join/Prune
|
|
messages are to be sent."
|
|
::= { pim 1 }
|
|
|
|
|
|
-- The PIM Interface Table
|
|
|
|
pimInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's PIM interfaces.
|
|
IGMP and PIM are enabled on all interfaces listed in this
|
|
table."
|
|
|
|
|
|
::= { pim 2 }
|
|
|
|
pimInterfaceEntry OBJECT-TYPE
|
|
SYNTAX PimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimInterfaceTable."
|
|
INDEX { pimInterfaceIfIndex }
|
|
::= { pimInterfaceTable 1 }
|
|
|
|
PimInterfaceEntry ::= SEQUENCE {
|
|
pimInterfaceIfIndex InterfaceIndex,
|
|
pimInterfaceAddress IpAddress,
|
|
pimInterfaceNetMask IpAddress,
|
|
pimInterfaceMode INTEGER,
|
|
pimInterfaceDR IpAddress,
|
|
pimInterfaceHelloInterval Integer32,
|
|
pimInterfaceStatus RowStatus,
|
|
pimInterfaceJoinPruneInterval Integer32,
|
|
pimInterfaceCBSRPreference Integer32
|
|
}
|
|
|
|
pimInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of this PIM interface."
|
|
::= { pimInterfaceEntry 1 }
|
|
|
|
pimInterfaceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
|
|
DESCRIPTION
|
|
"The IP address of the PIM interface."
|
|
::= { pimInterfaceEntry 2 }
|
|
|
|
pimInterfaceNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask for the IP address of the PIM interface."
|
|
::= { pimInterfaceEntry 3 }
|
|
|
|
pimInterfaceMode OBJECT-TYPE
|
|
SYNTAX INTEGER { dense(1), sparse(2), sparseDense(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured mode of this PIM interface. A value of
|
|
sparseDense is only valid for PIMv1."
|
|
DEFVAL { dense }
|
|
::= { pimInterfaceEntry 4 }
|
|
|
|
pimInterfaceDR OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Designated Router on this PIM interface. For point-
|
|
to-point interfaces, this object has the value 0.0.0.0."
|
|
::= { pimInterfaceEntry 5 }
|
|
|
|
pimInterfaceHelloInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency at which PIM Hello messages are transmitted
|
|
on this interface."
|
|
DEFVAL { 30 }
|
|
::= { pimInterfaceEntry 6 }
|
|
|
|
pimInterfaceStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. Creating the entry enables PIM
|
|
on the interface; destroying the entry disables PIM on the
|
|
interface."
|
|
::= { pimInterfaceEntry 7 }
|
|
|
|
pimInterfaceJoinPruneInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency at which PIM Join/Prune messages are
|
|
transmitted on this PIM interface. The default value of
|
|
this object is the pimJoinPruneInterval."
|
|
::= { pimInterfaceEntry 8 }
|
|
|
|
pimInterfaceCBSRPreference OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference value for the local interface as a candidate
|
|
bootstrap router. The value of -1 is used to indicate that
|
|
the local interface is not a candidate BSR interface."
|
|
DEFVAL { 0 }
|
|
::= { pimInterfaceEntry 9 }
|
|
|
|
-- The PIM Neighbor Table
|
|
|
|
pimNeighborTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PimNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's PIM neighbors."
|
|
|
|
|
|
::= { pim 3 }
|
|
|
|
pimNeighborEntry OBJECT-TYPE
|
|
SYNTAX PimNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
"An entry (conceptual row) in the pimNeighborTable."
|
|
INDEX { pimNeighborAddress }
|
|
::= { pimNeighborTable 1 }
|
|
|
|
PimNeighborEntry ::= SEQUENCE {
|
|
pimNeighborAddress IpAddress,
|
|
pimNeighborIfIndex InterfaceIndex,
|
|
pimNeighborUpTime TimeTicks,
|
|
pimNeighborExpiryTime TimeTicks,
|
|
pimNeighborMode INTEGER
|
|
}
|
|
|
|
pimNeighborAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the PIM neighbor for which this entry
|
|
contains information."
|
|
::= { pimNeighborEntry 1 }
|
|
|
|
pimNeighborIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface used to reach this
|
|
PIM neighbor."
|
|
::= { pimNeighborEntry 2 }
|
|
|
|
pimNeighborUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since this PIM neighbor (last) became a neighbor
|
|
of the local router."
|
|
::= { pimNeighborEntry 3 }
|
|
|
|
pimNeighborExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time remaining before this PIM neighbor will be
|
|
|
|
|
|
aged out."
|
|
::= { pimNeighborEntry 4 }
|
|
|
|
pimNeighborMode OBJECT-TYPE
|
|
SYNTAX INTEGER { dense(1), sparse(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The active PIM mode of this neighbor. This object is
|
|
deprecated for PIMv2 routers since all neighbors on the
|
|
interface must be either dense or sparse as determined by
|
|
the protocol running on the interface."
|
|
::= { pimNeighborEntry 5 }
|
|
|
|
--
|
|
-- The PIM IP Multicast Route Table
|
|
--
|
|
|
|
pimIpMRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PimIpMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM-specific information on
|
|
a subset of the rows of the ipMRouteTable defined in the IP
|
|
Multicast MIB."
|
|
|
|
|
|
::= { pim 4 }
|
|
|
|
pimIpMRouteEntry OBJECT-TYPE
|
|
SYNTAX PimIpMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimIpMRouteTable. There
|
|
is one entry per entry in the ipMRouteTable whose incoming
|
|
interface is running PIM."
|
|
INDEX { ipMRouteGroup, ipMRouteSource, ipMRouteSourceMask }
|
|
::= { pimIpMRouteTable 1 }
|
|
|
|
PimIpMRouteEntry ::= SEQUENCE {
|
|
pimIpMRouteUpstreamAssertTimer TimeTicks,
|
|
pimIpMRouteAssertMetric Integer32,
|
|
pimIpMRouteAssertMetricPref Integer32,
|
|
pimIpMRouteAssertRPTBit TruthValue,
|
|
pimIpMRouteFlags BITS
|
|
|
|
|
|
}
|
|
|
|
pimIpMRouteUpstreamAssertTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time remaining before the router changes its upstream
|
|
neighbor back to its RPF neighbor. This timer is called the
|
|
Assert timer in the PIM Sparse and Dense mode specification.
|
|
A value of 0 indicates that no Assert has changed the
|
|
upstream neighbor away from the RPF neighbor."
|
|
::= { pimIpMRouteEntry 1 }
|
|
|
|
pimIpMRouteAssertMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric advertised by the assert winner on the upstream
|
|
interface, or 0 if no such assert is in received."
|
|
::= { pimIpMRouteEntry 2 }
|
|
|
|
pimIpMRouteAssertMetricPref OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference advertised by the assert winner on the
|
|
upstream interface, or 0 if no such assert is in effect."
|
|
::= { pimIpMRouteEntry 3 }
|
|
|
|
pimIpMRouteAssertRPTBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the RPT-bit advertised by the assert winner on
|
|
the upstream interface, or false if no such assert is in
|
|
effect."
|
|
::= { pimIpMRouteEntry 4 }
|
|
|
|
pimIpMRouteFlags OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
rpt(0),
|
|
|
|
|
|
spt(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes PIM-specific flags related to a
|
|
multicast state entry. See the PIM Sparse Mode
|
|
specification for the meaning of the RPT and SPT bits."
|
|
::= { pimIpMRouteEntry 5 }
|
|
|
|
--
|
|
-- The PIM Next Hop Table
|
|
--
|
|
|
|
pimIpMRouteNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PimIpMRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM-specific information on
|
|
a subset of the rows of the ipMRouteNextHopTable defined in
|
|
the IP Multicast MIB."
|
|
|
|
|
|
::= { pim 7 }
|
|
|
|
pimIpMRouteNextHopEntry OBJECT-TYPE
|
|
SYNTAX PimIpMRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimIpMRouteNextHopTable.
|
|
There is one entry per entry in the ipMRouteNextHopTable
|
|
whose interface is running PIM and whose
|
|
ipMRouteNextHopState is pruned(1)."
|
|
INDEX { ipMRouteNextHopGroup, ipMRouteNextHopSource,
|
|
ipMRouteNextHopSourceMask, ipMRouteNextHopIfIndex,
|
|
ipMRouteNextHopAddress }
|
|
::= { pimIpMRouteNextHopTable 1 }
|
|
|
|
PimIpMRouteNextHopEntry ::= SEQUENCE {
|
|
pimIpMRouteNextHopPruneReason INTEGER
|
|
}
|
|
|
|
pimIpMRouteNextHopPruneReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other (1),
|
|
|
|
|
|
prune (2),
|
|
assert (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates why the downstream interface was
|
|
pruned, whether in response to a PIM prune message or due to
|
|
PIM Assert processing."
|
|
::= { pimIpMRouteNextHopEntry 2 }
|
|
|
|
-- The PIM RP Table
|
|
|
|
pimRPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PimRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM version 1 information
|
|
for the Rendezvous Points (RPs) for IP multicast groups.
|
|
This table is deprecated since its function is replaced by
|
|
the pimRPSetTable for PIM version 2."
|
|
|
|
|
|
::= { pim 5 }
|
|
|
|
pimRPEntry OBJECT-TYPE
|
|
SYNTAX PimRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimRPTable. There is one
|
|
entry per RP address for each IP multicast group."
|
|
INDEX { pimRPGroupAddress, pimRPAddress }
|
|
::= { pimRPTable 1 }
|
|
|
|
|
|
PimRPEntry ::= SEQUENCE {
|
|
pimRPGroupAddress IpAddress,
|
|
pimRPAddress IpAddress,
|
|
pimRPState INTEGER,
|
|
pimRPStateTimer TimeTicks,
|
|
pimRPLastChange TimeTicks,
|
|
pimRPRowStatus RowStatus
|
|
}
|
|
|
|
pimRPGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP multicast group address for which this entry
|
|
contains information about an RP."
|
|
::= { pimRPEntry 1 }
|
|
|
|
pimRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The unicast address of the RP."
|
|
::= { pimRPEntry 2 }
|
|
|
|
pimRPState OBJECT-TYPE
|
|
SYNTAX INTEGER { up(1), down(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The state of the RP."
|
|
::= { pimRPEntry 3 }
|
|
|
|
pimRPStateTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The minimum time remaining before the next state change.
|
|
When pimRPState is up, this is the minimum time which must
|
|
expire until it can be declared down. When pimRPState is
|
|
down, this is the time until it will be declared up (in
|
|
order to retry)."
|
|
::= { pimRPEntry 4 }
|
|
|
|
|
|
pimRPLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time when the corresponding
|
|
instance of pimRPState last changed its value."
|
|
::= { pimRPEntry 5 }
|
|
|
|
pimRPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { pimRPEntry 6 }
|
|
|
|
-- The PIM RP-Set Table
|
|
|
|
pimRPSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PimRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM information for
|
|
candidate Rendezvous Points (RPs) for IP multicast groups.
|
|
When the local router is the BSR, this information is
|
|
obtained from received Candidate-RP-Advertisements. When
|
|
the local router is not the BSR, this information is
|
|
obtained from received RP-Set messages."
|
|
|
|
|
|
::= { pim 6 }
|
|
|
|
pimRPSetEntry OBJECT-TYPE
|
|
SYNTAX PimRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimRPSetTable."
|
|
INDEX { pimRPSetComponent, pimRPSetGroupAddress,
|
|
pimRPSetGroupMask, pimRPSetAddress }
|
|
::= { pimRPSetTable 1 }
|
|
|
|
PimRPSetEntry ::= SEQUENCE {
|
|
|
|
|
|
pimRPSetGroupAddress IpAddress,
|
|
pimRPSetGroupMask IpAddress,
|
|
pimRPSetAddress IpAddress,
|
|
pimRPSetHoldTime Integer32,
|
|
pimRPSetExpiryTime TimeTicks,
|
|
pimRPSetComponent Integer32
|
|
}
|
|
|
|
pimRPSetGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address which, when combined with
|
|
pimRPSetGroupMask, gives the group prefix for which this
|
|
entry contains information about the Candidate-RP."
|
|
::= { pimRPSetEntry 1 }
|
|
|
|
pimRPSetGroupMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group address mask which, when combined with
|
|
pimRPSetGroupAddress, gives the group prefix for which this
|
|
entry contains information about the Candidate-RP."
|
|
::= { pimRPSetEntry 2 }
|
|
|
|
pimRPSetAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the Candidate-RP."
|
|
::= { pimRPSetEntry 3 }
|
|
|
|
pimRPSetHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The holdtime of a Candidate-RP. If the local router is not
|
|
the BSR, this value is 0."
|
|
::= { pimRPSetEntry 4 }
|
|
|
|
|
|
pimRPSetExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time remaining before the Candidate-RP will be
|
|
declared down. If the local router is not the BSR, this
|
|
value is 0."
|
|
::= { pimRPSetEntry 5 }
|
|
|
|
pimRPSetComponent OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A number uniquely identifying the component. Each
|
|
protocol instance connected to a separate domain should have
|
|
a different index value."
|
|
::= { pimRPSetEntry 6 }
|
|
|
|
-- The PIM Candidate-RP Table
|
|
|
|
pimCandidateRPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PimCandidateRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the IP multicast groups for
|
|
which the local router is to advertise itself as a
|
|
Candidate-RP when the value of pimComponentCRPHoldTime is
|
|
non-zero. If this table is empty, then the local router
|
|
will advertise itself as a Candidate-RP for all groups
|
|
(providing the value of pimComponentCRPHoldTime is non-
|
|
zero)."
|
|
|
|
|
|
::= { pim 11 }
|
|
|
|
pimCandidateRPEntry OBJECT-TYPE
|
|
SYNTAX PimCandidateRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimCandidateRPTable."
|
|
INDEX { pimCandidateRPGroupAddress,
|
|
pimCandidateRPGroupMask }
|
|
|
|
|
|
::= { pimCandidateRPTable 1 }
|
|
|
|
PimCandidateRPEntry ::= SEQUENCE {
|
|
pimCandidateRPGroupAddress IpAddress,
|
|
pimCandidateRPGroupMask IpAddress,
|
|
pimCandidateRPAddress IpAddress,
|
|
pimCandidateRPRowStatus RowStatus
|
|
}
|
|
|
|
pimCandidateRPGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address which, when combined with
|
|
pimCandidateRPGroupMask, identifies a group prefix for which
|
|
the local router will advertise itself as a Candidate-RP."
|
|
::= { pimCandidateRPEntry 1 }
|
|
|
|
pimCandidateRPGroupMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group address mask which, when combined with
|
|
pimCandidateRPGroupMask, identifies a group prefix for which
|
|
the local router will advertise itself as a Candidate-RP."
|
|
::= { pimCandidateRPEntry 2 }
|
|
|
|
pimCandidateRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (unicast) address of the interface which will be
|
|
advertised as a Candidate-RP."
|
|
::= { pimCandidateRPEntry 3 }
|
|
|
|
pimCandidateRPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
|
|
|
|
::= { pimCandidateRPEntry 4 }
|
|
|
|
-- The PIM Component Table
|
|
|
|
pimComponentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PimComponentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing objects specific to a PIM
|
|
domain. One row exists for each domain to which the router
|
|
is connected. A PIM-SM domain is defined as an area of the
|
|
network over which Bootstrap messages are forwarded.
|
|
Typically, a PIM-SM router will be a member of exactly one
|
|
domain. This table also supports, however, routers which
|
|
may form a border between two PIM-SM domains and do not
|
|
forward Bootstrap messages between them."
|
|
|
|
|
|
::= { pim 12 }
|
|
|
|
pimComponentEntry OBJECT-TYPE
|
|
SYNTAX PimComponentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimComponentTable."
|
|
INDEX { pimComponentIndex }
|
|
::= { pimComponentTable 1 }
|
|
|
|
PimComponentEntry ::= SEQUENCE {
|
|
pimComponentIndex Integer32,
|
|
pimComponentBSRAddress IpAddress,
|
|
pimComponentBSRExpiryTime TimeTicks,
|
|
pimComponentCRPHoldTime Integer32,
|
|
pimComponentStatus RowStatus
|
|
}
|
|
|
|
pimComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol
|
|
instance connected to a separate domain should have a
|
|
different index value. Routers that only support membership
|
|
in a single PIM-SM domain should use a pimComponentIndex
|
|
|
|
|
|
value of 1."
|
|
::= { pimComponentEntry 1 }
|
|
|
|
pimComponentBSRAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the bootstrap router (BSR) for the local
|
|
PIM region."
|
|
::= { pimComponentEntry 2 }
|
|
|
|
pimComponentBSRExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time remaining before the bootstrap router in
|
|
the local domain will be declared down. For candidate BSRs,
|
|
this is the time until the component sends an RP-Set
|
|
message. For other routers, this is the time until it may
|
|
accept an RP-Set message from a lower candidate BSR."
|
|
::= { pimComponentEntry 3 }
|
|
|
|
pimComponentCRPHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The holdtime of the component when it is a candidate RP in
|
|
the local domain. The value of 0 is used to indicate that
|
|
the local system is not a Candidate-RP."
|
|
DEFVAL { 0 }
|
|
::= { pimComponentEntry 4 }
|
|
|
|
pimComponentStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. Creating the entry creates
|
|
another protocol instance; destroying the entry disables a
|
|
protocol instance."
|
|
::= { pimComponentEntry 5 }
|
|
|
|
|
|
-- conformance information
|
|
|
|
pimMIBConformance OBJECT IDENTIFIER ::= { pimMIB 2 }
|
|
pimMIBCompliances OBJECT IDENTIFIER ::= { pimMIBConformance 1 }
|
|
pimMIBGroups OBJECT IDENTIFIER ::= { pimMIBConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
pimV1MIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for routers running PIMv1 and
|
|
implementing the PIM MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { pimV1MIBGroup }
|
|
|
|
::= { pimMIBCompliances 1 }
|
|
|
|
pimSparseV2MIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for routers running PIM Sparse
|
|
Mode and implementing the PIM MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { pimV2MIBGroup }
|
|
|
|
GROUP pimV2CandidateRPMIBGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if the router is capable of being a
|
|
Candidate RP."
|
|
|
|
OBJECT pimInterfaceStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
::= { pimMIBCompliances 2 }
|
|
|
|
pimDenseV2MIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for routers running PIM Dense Mode
|
|
and implementing the PIM MIB."
|
|
MODULE -- this module
|
|
|
|
|
|
MANDATORY-GROUPS { pimDenseV2MIBGroup }
|
|
|
|
OBJECT pimInterfaceStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
::= { pimMIBCompliances 3 }
|
|
|
|
-- units of conformance
|
|
|
|
pimV2MIBGroup OBJECT-GROUP
|
|
OBJECTS { pimJoinPruneInterval, pimNeighborIfIndex,
|
|
pimNeighborUpTime, pimNeighborExpiryTime,
|
|
pimInterfaceAddress, pimInterfaceNetMask,
|
|
pimInterfaceDR, pimInterfaceHelloInterval,
|
|
pimInterfaceStatus, pimInterfaceJoinPruneInterval,
|
|
pimInterfaceCBSRPreference, pimInterfaceMode,
|
|
pimRPSetHoldTime, pimRPSetExpiryTime,
|
|
pimComponentBSRAddress, pimComponentBSRExpiryTime,
|
|
pimComponentCRPHoldTime, pimComponentStatus,
|
|
pimIpMRouteFlags, pimIpMRouteUpstreamAssertTimer
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects to support management of PIM Sparse
|
|
Mode (version 2) routers."
|
|
::= { pimMIBGroups 2 }
|
|
|
|
pimDenseV2MIBGroup OBJECT-GROUP
|
|
OBJECTS { pimNeighborIfIndex,
|
|
pimNeighborUpTime, pimNeighborExpiryTime,
|
|
pimInterfaceAddress, pimInterfaceNetMask,
|
|
pimInterfaceDR, pimInterfaceHelloInterval,
|
|
pimInterfaceStatus, pimInterfaceMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects to support management of PIM Dense
|
|
Mode (version 2) routers."
|
|
::= { pimMIBGroups 5 }
|
|
|
|
pimV2CandidateRPMIBGroup OBJECT-GROUP
|
|
OBJECTS { pimCandidateRPAddress,
|
|
|
|
|
|
pimCandidateRPRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects to support configuration of which
|
|
groups a router is to advertise itself as a Candidate-RP."
|
|
::= { pimMIBGroups 3 }
|
|
|
|
pimV1MIBGroup OBJECT-GROUP
|
|
OBJECTS { pimJoinPruneInterval, pimNeighborIfIndex,
|
|
pimNeighborUpTime, pimNeighborExpiryTime,
|
|
pimNeighborMode,
|
|
pimInterfaceAddress, pimInterfaceNetMask,
|
|
pimInterfaceJoinPruneInterval, pimInterfaceStatus,
|
|
pimInterfaceMode, pimInterfaceDR,
|
|
pimInterfaceHelloInterval,
|
|
pimRPState, pimRPStateTimer,
|
|
pimRPLastChange, pimRPRowStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects to support management of PIM
|
|
(version 1) routers."
|
|
::= { pimMIBGroups 4 }
|
|
|
|
pimNextHopGroup OBJECT-GROUP
|
|
OBJECTS { pimIpMRouteNextHopPruneReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of optional objects to provide per-next hop
|
|
information for diagnostic purposes. Supporting this group
|
|
may add a large number of instances to a tree walk, but the
|
|
information in this group can be extremely useful in
|
|
tracking down multicast connectivity problems."
|
|
::= { pimMIBGroups 6 }
|
|
|
|
pimAssertGroup OBJECT-GROUP
|
|
OBJECTS { pimIpMRouteAssertMetric, pimIpMRouteAssertMetricPref,
|
|
pimIpMRouteAssertRPTBit }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of optional objects to provide extra
|
|
information about the assert election process. There is no
|
|
protocol reason to keep such information, but some
|
|
implementations may already keep this information and make
|
|
|
|
|
|
it available. These objects can also be very useful in
|
|
debugging connectivity or duplicate packet problems,
|
|
especially if the assert winner does not support the PIM and
|
|
IP Multicast MIBs."
|
|
::= { pimMIBGroups 7 }
|
|
|
|
END
|