Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1814 lines
64 KiB
Text
1814 lines
64 KiB
Text
-- extracted from draft-ietf-ppvpn-mpls-vpn-mib-05.txt
|
|
-- at Fri May 14 06:21:04 2004
|
|
|
|
MPLS-VPN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
experimental, Integer32, Counter32, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
|
|
TimeStamp, DisplayString
|
|
FROM SNMPv2-TC
|
|
|
|
InterfaceIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
|
|
VPNId
|
|
FROM PPVPN-TC-MIB
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
|
|
bgp4PathAttrIpAddrPrefix, bgp4PathAttrIpAddrPrefixLen,
|
|
bgp4PathAttrPeer
|
|
FROM BGP4-MIB;
|
|
|
|
mplsVpnMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200210311200Z" -- 31 October 2002 12:00:00 GMT
|
|
ORGANIZATION "Provider Provisioned Virtual Private
|
|
Networks Working Group."
|
|
CONTACT-INFO
|
|
" Thomas D. Nadeau
|
|
tnadeau@cisco.com
|
|
|
|
Luyuan Fang
|
|
luyuanfang@att.com
|
|
|
|
Stephen Brannon
|
|
|
|
Fabio M. Chiussi
|
|
fabio@bell-labs.com
|
|
|
|
Joseph Dube
|
|
jdube@avici.com
|
|
|
|
Martin Tatham
|
|
martin.tatham@bt.com
|
|
|
|
Harmen van der Linde
|
|
hvdl@att.com
|
|
|
|
Comments and discussion to ppvpn@ietf.org"
|
|
|
|
DESCRIPTION
|
|
"This MIB contains managed object definitions for the
|
|
Multiprotocol Label Switching (MPLS)/Border Gateway
|
|
Protocol (BGP) Virtual Private Networks (VPNs) as
|
|
defined in : Rosen, E., Viswanathan, A., and R.
|
|
Callon, Multiprotocol Label Switching Architecture,
|
|
RFC3031, January 2001."
|
|
|
|
-- Revision history.
|
|
REVISION "200210311200Z" -- 31 October 2002 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Added Intellectual Property Considerations section.
|
|
|
|
Added new mplsNumVrfRouteMaxThreshCleared notification.
|
|
"
|
|
|
|
REVISION "200102281200Z" -- 28 February 2002 12:00:00 GMT
|
|
DESCRIPTION
|
|
"mplsVpnVrfRouteIfIndex changed to InterfaceIndexOrZero.
|
|
|
|
mplsVpnIfVpnRouteDistProtocol BITS changed to start at 0.
|
|
|
|
Changed notifications to not include indexes. Those indexes'
|
|
MAX-ACESS changed to not-accessible.
|
|
|
|
Fixed description of mplsVpnIfLabelEdgeType and
|
|
mplsVpnVrfConfLastChanged.
|
|
"
|
|
|
|
REVISION "200201261200Z" -- 26 January 2002 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Removed indexes from notifications.
|
|
|
|
Changed mplsVpnVrfRouteTos to not-accessible as it is
|
|
used as an index."
|
|
|
|
REVISION "200111131200Z" -- 13 November 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"MPLS PPVPN MIB now assigned IANA experimental 118.
|
|
|
|
Changed mplsVpnVrfRouteTarget from not-accessible
|
|
to read-create.
|
|
"
|
|
|
|
REVISION "200110151200Z" -- 15 October 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Fixed compilation errors from last version.
|
|
|
|
Changed mplsVpnIfVpnRouteDistProtocol to be a BITS
|
|
structure to allow more than one to be selected.
|
|
|
|
Changed mplsIfDown -> mplsVrfIfDown
|
|
Changed mplsIfUp -> mplsVrfIfUp
|
|
"
|
|
|
|
REVISION
|
|
"200110051200Z" -- 05 October 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Added integer index and removed route distinguisher index
|
|
from mplsVpnVrfRouteTargetTable.
|
|
|
|
Removed mplsVpn ifType; simply use mpls(166) ifType for
|
|
MPLS VPN-enabled interfaces instead.
|
|
|
|
Removed interface and protocol-related objects from
|
|
mplsVpnVrfTable.
|
|
|
|
Moved mplsVpnVrfConfMaxPossibleRoutes from
|
|
mplsVpnVrfTable to scalar object.
|
|
|
|
Removed mplsVpnActiveVrfInterfaces scalar object.
|
|
Removed mplsVpnVrfUpTime object from mplsVpnVrfTable.
|
|
|
|
Added MplsVpnVrfBgpNbrPrefixTable providing a linkage with
|
|
the bgp4PathAttrTable of the BGPv4 MIB."
|
|
|
|
REVISION
|
|
"200107171200Z" -- 17 July 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Removed mplsVpnVrfRouteTargetImport/Export from route target
|
|
table, and modified indexing to better reflect N <> R
|
|
distribution policy. Also added new object called
|
|
mplsVpnVrfRouteTargetType which denotes import/export
|
|
policy for the specified route target.
|
|
|
|
Added mplsVpnIfConfRowStatus which allows for
|
|
an interface to be associated with a VPN through SNMP
|
|
configuration.
|
|
|
|
Added VrfName to index of VrfInterfaceConfEntry which allows
|
|
interfaces to be associated with the appropriate VRF.
|
|
|
|
Modified description of mplsVpnVrfConfMaxPossibleRoutes and
|
|
mplsVpnVrfConfMaxRoutes to allow for undetermined value.
|
|
|
|
Removed 'both' enumerated value in mplsVpnVrfBgpNbrRole.
|
|
|
|
Updated example to reflect these changes."
|
|
|
|
REVISION
|
|
"200107101200Z" -- 10 July 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Renamed mplsNumVrfSecViolationThreshExceeded to
|
|
mplsNumVrfSecIllglLblThrshExcd, and removed
|
|
mplsVpnIfConfIndex from varbind.
|
|
Changed MplsVpnId TC from SnmpAdminString to OCTET STRING.
|
|
|
|
Added mplsVpnVrfSecIllegalLblRcvThrsh to
|
|
mplsVpnVrfSecEntry.
|
|
|
|
Changed duplicate mplsVpnVrfRouteTargetImport in
|
|
mplsVpnVrfRouteTargetEntry INDEX to
|
|
mplsVpnVrfRouteTargetExport."
|
|
|
|
REVISION
|
|
"200106191200Z" -- 19 June 2001 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Fixed several compile errors."
|
|
|
|
REVISION
|
|
"200105301200Z" -- 30 May 2001 12:00:00 EST
|
|
DESCRIPTION
|
|
"Updated most of document and MIB to reflect comments from WG."
|
|
|
|
REVISION
|
|
"200009301200Z" -- 30 September 2000 12:00:00 EST
|
|
DESCRIPTION
|
|
"Initial draft version."
|
|
::= { experimental 118 } -- assigned by IANA
|
|
|
|
-- Textual Conventions.
|
|
|
|
MplsVpnName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identifier that is assigned to each MPLS/BGP VPN and
|
|
is used to uniquely identify it. This is assigned by the
|
|
system operator or NMS and SHOULD be unique throughout
|
|
the MPLS domain. If this is the case, then this identifier
|
|
can then be used at any LSR within a specific MPLS domain
|
|
to identify this MPLS/BGP VPN. It may also be possible to
|
|
preserve the uniqueness of this identifier across MPLS
|
|
domain boundaries, in which case this identifier can then
|
|
be used to uniquely identify MPLS/BGP VPNs on a more global
|
|
basis. This object MAY be set to the VPN ID as defined in
|
|
RFC 2685."
|
|
REFERENCE
|
|
"RFC 2685 [VPN-RFC2685] Fox B., et al, 'Virtual Private
|
|
Networks Identifier', September 1999."
|
|
SYNTAX OCTET STRING(SIZE (0..31))
|
|
|
|
MplsVpnRouteDistinguisher ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syntax for a route distinguisher and route target."
|
|
SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
|
|
-- Top level components of this MIB.
|
|
mplsVpnNotifications OBJECT IDENTIFIER ::= { mplsVpnMIB 0 }
|
|
mplsVpnObjects OBJECT IDENTIFIER ::= { mplsVpnMIB 1 }
|
|
mplsVpnScalars OBJECT IDENTIFIER ::= { mplsVpnObjects 1 }
|
|
mplsVpnConf OBJECT IDENTIFIER ::= { mplsVpnObjects 2 }
|
|
mplsVpnPerf OBJECT IDENTIFIER ::= { mplsVpnObjects 3 }
|
|
mplsVpnRoute OBJECT IDENTIFIER ::= { mplsVpnObjects 4 }
|
|
mplsVpnConformance OBJECT IDENTIFIER ::= { mplsVpnMIB 3 }
|
|
|
|
--
|
|
-- Scalar Objects
|
|
--
|
|
mplsVpnConfiguredVrfs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRFs which are configured on this node."
|
|
::= { mplsVpnScalars 1 }
|
|
|
|
mplsVpnActiveVrfs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRFs which are active on this node.
|
|
That is, those VRFs whose corresponding mplsVpnVrfOperStatus
|
|
object value is equal to operational (1)."
|
|
::= { mplsVpnScalars 2 }
|
|
|
|
mplsVpnConnectedInterfaces OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of interfaces connected to a VRF."
|
|
::= { mplsVpnScalars 3 }
|
|
|
|
mplsVpnNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this object is true, then it enables the
|
|
generation of all notifications defined in
|
|
this MIB."
|
|
DEFVAL { false }
|
|
::= { mplsVpnScalars 4 }
|
|
|
|
mplsVpnVrfConfMaxPossibleRoutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes maximum number of routes which the device
|
|
will allow all VRFs jointly to hold. If this value is
|
|
set to 0, this indicates that the device is
|
|
unable to determine the absolute maximum. In this
|
|
case, the configured maximum MAY not actually
|
|
be allowed by the device."
|
|
::= { mplsVpnScalars 5 }
|
|
|
|
mplsVpnVrfConfRouteMaxThreshTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the interval in seconds, at which the route max threshold
|
|
notification will be re-issued after the maximum value has been exceeded
|
|
(or has been reached if mplsVpnVrfConfMaxRoutes and
|
|
mplsVpnVrfConfHighRouteThreshold are equal) and the initial
|
|
notification has been issued. This value is intended to prevent continuous
|
|
generation of notifications by an agent in the event that routes are
|
|
continually added to a VRF after it has reached its maximum value. The
|
|
default value is 10 minutes (600 seconds). If this value is set to 0, the agent
|
|
should only issue a single notification at the time that the maxium threshold
|
|
has been reached, and should not issue any more notifications until the value
|
|
of routes has fallen below the configured threshold value."
|
|
DEFVAL { 600 }
|
|
::= { mplsVpnScalars 6 }
|
|
|
|
-- VPN Interface Configuration Table
|
|
|
|
mplsVpnIfConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnIfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS capability
|
|
and associated information."
|
|
::= { mplsVpnConf 1 }
|
|
|
|
mplsVpnIfConfEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnIfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every interface capable of supporting MPLS/BGP VPN.
|
|
Each entry in this table is meant to correspond to
|
|
an entry in the Interfaces Table."
|
|
INDEX { mplsVpnVrfName, mplsVpnIfConfIndex }
|
|
::= { mplsVpnIfConfTable 1 }
|
|
|
|
MplsVpnIfConfEntry ::= SEQUENCE {
|
|
mplsVpnIfConfIndex InterfaceIndex,
|
|
mplsVpnIfLabelEdgeType INTEGER,
|
|
mplsVpnIfVpnClassification INTEGER,
|
|
mplsVpnIfVpnRouteDistProtocol BITS,
|
|
mplsVpnIfConfStorageType StorageType,
|
|
mplsVpnIfConfRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnIfConfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for an entry in the
|
|
MplsVPNInterfaceConfTable. A non-zero index for an
|
|
entry indicates the ifIndex for the corresponding
|
|
interface entry in the MPLS-VPN-layer in the ifTable.
|
|
Note that this table does not necessarily correspond
|
|
one-to-one with all entries in the Interface MIB
|
|
having an ifType of MPLS-layer; rather, only those
|
|
which are enabled for MPLS/BGP VPN functionality."
|
|
REFERENCE
|
|
"RFC 2233 - The Interfaces Group MIB using SMIv2,
|
|
McCloghrie, K., and F. Kastenholtz, Nov. 1997"
|
|
::= { mplsVpnIfConfEntry 1 }
|
|
|
|
mplsVpnIfLabelEdgeType OBJECT-TYPE
|
|
SYNTAX INTEGER { providerEdge (1),
|
|
customerEdge (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the providerEdge(0) (PE) or customerEdge(1)
|
|
(CE) bit MUST be set."
|
|
::= { mplsVpnIfConfEntry 2 }
|
|
|
|
mplsVpnIfVpnClassification OBJECT-TYPE
|
|
SYNTAX INTEGER { carrierOfCarrier (1),
|
|
enterprise (2),
|
|
interProvider (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether this link participates in a
|
|
carrier-of-carrier's, enterprise, or inter-provider
|
|
scenario."
|
|
::= { mplsVpnIfConfEntry 3 }
|
|
|
|
mplsVpnIfVpnRouteDistProtocol OBJECT-TYPE
|
|
SYNTAX BITS { none (0),
|
|
bgp (1),
|
|
ospf (2),
|
|
rip(3),
|
|
isis(4),
|
|
other (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the route distribution protocol across the
|
|
PE-CE link. Note that more than one routing protocol
|
|
may be enabled at the same time."
|
|
::= { mplsVpnIfConfEntry 4 }
|
|
|
|
mplsVpnIfConfStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { mplsVpnIfConfEntry 5 }
|
|
|
|
mplsVpnIfConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status for this entry. This value is
|
|
used to create a row in this table, signifying
|
|
that the specified interface is to be associated
|
|
with the specified interface. If this operation
|
|
succeeds, the interface will have been associated,
|
|
otherwise the agent would not allow the association.
|
|
If the agent only allows read-only operations on
|
|
this table, it will create entries in this table
|
|
as they are created."
|
|
::= { mplsVpnIfConfEntry 6 }
|
|
|
|
-- VRF Configuration Table
|
|
|
|
mplsVpnVrfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS/BGP VPN
|
|
VRF Table capability and associated information.
|
|
Entries in this table define VRF routing instances
|
|
associated with MPLS/VPN interfaces. Note that
|
|
multiple interfaces can belong to the same VRF
|
|
instance. The collection of all VRF instances
|
|
comprises an actual VPN."
|
|
::= { mplsVpnConf 2 }
|
|
|
|
mplsVpnVrfEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN. The
|
|
indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName }
|
|
::= { mplsVpnVrfTable 1 }
|
|
|
|
MplsVpnVrfEntry ::= SEQUENCE {
|
|
mplsVpnVrfName MplsVpnName,
|
|
mplsVpnVrfVpnId VPNId,
|
|
mplsVpnVrfDescription SnmpAdminString,
|
|
mplsVpnVrfRouteDistinguisher MplsVpnRouteDistinguisher,
|
|
mplsVpnVrfCreationTime TimeStamp,
|
|
mplsVpnVrfOperStatus INTEGER,
|
|
mplsVpnVrfActiveInterfaces Unsigned32,
|
|
mplsVpnVrfAssociatedInterfaces Unsigned32,
|
|
mplsVpnVrfConfMidRouteThreshold Unsigned32,
|
|
mplsVpnVrfConfHighRouteThreshold Unsigned32,
|
|
mplsVpnVrfConfMaxRoutes Unsigned32,
|
|
mplsVpnVrfConfLastChanged TimeStamp,
|
|
mplsVpnVrfConfRowStatus RowStatus,
|
|
mplsVpnVrfConfStorageType StorageType
|
|
}
|
|
|
|
mplsVpnVrfName OBJECT-TYPE
|
|
SYNTAX MplsVpnName
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable name of this VPN. This MAY
|
|
be equivalent to the RFC2685 VPN-ID, but may
|
|
also vary. If it is set to the VPN ID, it MUST
|
|
be equivalent to the value of mplsVpnVrfVpnId.
|
|
It is strongly recommended that all sites supporting
|
|
VRFs that are part of the same VPN use the same
|
|
naming convention for VRFs as well as the same VPN
|
|
ID."
|
|
|
|
REFERENCE
|
|
"RFC 2685 [VPN-RFC2685] Fox B., et al, `Virtual
|
|
Private Networks Identifier`, September 1999."
|
|
::= { mplsVpnVrfEntry 1 }
|
|
|
|
mplsVpnVrfVpnId OBJECT-TYPE
|
|
SYNTAX VPNId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPN ID as specified in RFC 2685. If a VPN ID
|
|
as not been specified for this VRF, then this variable
|
|
SHOULD be set to an empty string."
|
|
::= { mplsVpnVrfEntry 2 }
|
|
|
|
mplsVpnVrfDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable description of this VRF."
|
|
::= { mplsVpnVrfEntry 3 }
|
|
|
|
mplsVpnVrfRouteDistinguisher OBJECT-TYPE
|
|
SYNTAX MplsVpnRouteDistinguisher
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route distinguisher for this VRF."
|
|
::= { mplsVpnVrfEntry 4 }
|
|
|
|
mplsVpnVrfCreationTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which this VRF entry was created."
|
|
::= { mplsVpnVrfEntry 5 }
|
|
|
|
mplsVpnVrfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { up (1),
|
|
down (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether a VRF is operational or not. A VRF is
|
|
up(1) when at least one interface associated with the
|
|
VRF, which ifOperStatus is up(1). A VRF is down(2) when:
|
|
|
|
a. There does not exist at least one interface whose
|
|
ifOperStatus is up(1).
|
|
|
|
b. There are no interfaces associated with the VRF."
|
|
::= { mplsVpnVrfEntry 6 }
|
|
|
|
mplsVpnVrfActiveInterfaces OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of interfaces connected to this VRF with
|
|
ifOperStatus = up(1).
|
|
|
|
This counter should be incremented when:
|
|
|
|
a. When the ifOperStatus of one of the connected interfaces
|
|
changes from down(2) to up(1).
|
|
|
|
b. When an interface with ifOperStatus = up(1) is connected
|
|
to this VRF.
|
|
|
|
This counter should be decremented when:
|
|
|
|
a. When the ifOperStatus of one of the connected interfaces
|
|
changes from up(1) to down(2).
|
|
|
|
b. When one of the connected interfaces with
|
|
ifOperStatus = up(1) gets disconnected from this VRF."
|
|
::= { mplsVpnVrfEntry 7 }
|
|
|
|
mplsVpnVrfAssociatedInterfaces OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of interfaces connected to this VRF
|
|
(independent of ifOperStatus type)."
|
|
::= { mplsVpnVrfEntry 8 }
|
|
|
|
mplsVpnVrfConfMidRouteThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes mid-level water marker for the number
|
|
of routes which this VRF may hold."
|
|
::= { mplsVpnVrfEntry 9 }
|
|
|
|
mplsVpnVrfConfHighRouteThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes high-level water marker for the number of
|
|
routes which this VRF may hold."
|
|
::= { mplsVpnVrfEntry 10 }
|
|
|
|
mplsVpnVrfConfMaxRoutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes maximum number of routes which this VRF is
|
|
configured to hold. This value MUST be less than or
|
|
equal to mplsVrfMaxPossibleRoutes unless it is set
|
|
to 0."
|
|
::= { mplsVpnVrfEntry 11 }
|
|
|
|
mplsVpnVrfConfLastChanged OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time of the last
|
|
change of this table entry, which includes changes of
|
|
VRF parameters defined in this table or addition or
|
|
deletion of interfaces associated with this VRF."
|
|
::= { mplsVpnVrfEntry 12 }
|
|
|
|
mplsVpnVrfConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { mplsVpnVrfEntry 13 }
|
|
|
|
mplsVpnVrfConfStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { mplsVpnVrfEntry 14 }
|
|
|
|
-- MplsVpnRouteTargetTable
|
|
|
|
mplsVpnVrfRouteTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-VRF route target association.
|
|
Each entry identifies a connectivity policy supported
|
|
as part of a VPN."
|
|
::= { mplsVpnConf 3 }
|
|
|
|
mplsVpnVrfRouteTargetEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in this table is created by an LSR for
|
|
each route target configured for a VRF supporting
|
|
a MPLS/BGP VPN instance. The indexing provides an
|
|
ordering per-VRF instance."
|
|
INDEX { mplsVpnVrfName, mplsVpnVrfRouteTargetIndex,
|
|
mplsVpnVrfRouteTargetType }
|
|
::= { mplsVpnVrfRouteTargetTable 1 }
|
|
|
|
MplsVpnVrfRouteTargetEntry ::= SEQUENCE {
|
|
mplsVpnVrfRouteTargetIndex Unsigned32,
|
|
mplsVpnVrfRouteTargetType INTEGER,
|
|
mplsVpnVrfRouteTarget MplsVpnRouteDistinguisher,
|
|
mplsVpnVrfRouteTargetDescr DisplayString,
|
|
mplsVpnVrfRouteTargetRowStatus RowStatus
|
|
}
|
|
|
|
mplsVpnVrfRouteTargetIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Auxiliary index for route-targets configured for a
|
|
particular VRF."
|
|
::= { mplsVpnVrfRouteTargetEntry 2 }
|
|
|
|
mplsVpnVrfRouteTargetType OBJECT-TYPE
|
|
SYNTAX INTEGER { import(1), export(2), both(3) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route target export distribution type."
|
|
::= { mplsVpnVrfRouteTargetEntry 3 }
|
|
|
|
mplsVpnVrfRouteTarget OBJECT-TYPE
|
|
SYNTAX MplsVpnRouteDistinguisher
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route target distribution policy."
|
|
::= { mplsVpnVrfRouteTargetEntry 4 }
|
|
|
|
mplsVpnVrfRouteTargetDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of the route target."
|
|
::= { mplsVpnVrfRouteTargetEntry 5 }
|
|
|
|
mplsVpnVrfRouteTargetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status for this entry."
|
|
::= { mplsVpnVrfRouteTargetEntry 6 }
|
|
|
|
-- MplsVpnVrfBgpNbrAddrTable
|
|
|
|
mplsVpnVrfBgpNbrAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfBgpNbrAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table specifies a per-interface
|
|
MPLS/EBGP neighbor."
|
|
::= { mplsVpnConf 4 }
|
|
|
|
mplsVpnVrfBgpNbrAddrEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfBgpNbrAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN. The
|
|
indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName, mplsVpnIfConfIndex,
|
|
mplsVpnVrfBgpNbrIndex }
|
|
::= { mplsVpnVrfBgpNbrAddrTable 1 }
|
|
|
|
MplsVpnVrfBgpNbrAddrEntry ::= SEQUENCE {
|
|
mplsVpnVrfBgpNbrIndex Unsigned32,
|
|
mplsVpnVrfBgpNbrRole INTEGER,
|
|
mplsVpnVrfBgpNbrType InetAddressType,
|
|
mplsVpnVrfBgpNbrAddr InetAddress,
|
|
mplsVpnVrfBgpNbrRowStatus RowStatus,
|
|
mplsVpnVrfBgpNbrStorageType StorageType
|
|
}
|
|
|
|
mplsVpnVrfBgpNbrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique tertiary index for an entry in the
|
|
MplsVpnVrfBgpNbrAddrEntry Table."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 1 }
|
|
|
|
mplsVpnVrfBgpNbrRole OBJECT-TYPE
|
|
SYNTAX INTEGER { ce(1), pe(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the role played by this EBGP neighbor
|
|
with respect to this VRF."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 2 }
|
|
|
|
mplsVpnVrfBgpNbrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the address family of the PE address."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 3 }
|
|
|
|
mplsVpnVrfBgpNbrAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the EBGP neighbor address."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 4 }
|
|
|
|
mplsVpnVrfBgpNbrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 5 }
|
|
|
|
mplsVpnVrfBgpNbrStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { mplsVpnVrfBgpNbrAddrEntry 6 }
|
|
|
|
-- MplsVpnVrfBgpNbrPrefixTable
|
|
|
|
--
|
|
-- Ed note: this table will be removed as soon as the BGP4 MIB
|
|
-- is updated.
|
|
--
|
|
mplsVpnVrfBgpNbrPrefixTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfBgpNbrPrefixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-VRF vpnv4 multi-protocol
|
|
prefixes supported by BGP."
|
|
::= { mplsVpnConf 5 }
|
|
|
|
mplsVpnVrfBgpNbrPrefixEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfBgpNbrPrefixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every BGP prefix associated with a VRF supporting a
|
|
MPLS/BGP VPN. The indexing provides an ordering of
|
|
BGP prefixes per VRF."
|
|
INDEX { mplsVpnVrfName, bgp4PathAttrIpAddrPrefix,
|
|
bgp4PathAttrIpAddrPrefixLen, bgp4PathAttrPeer }
|
|
::= { mplsVpnVrfBgpNbrPrefixTable 1 }
|
|
|
|
MplsVpnVrfBgpNbrPrefixEntry ::= SEQUENCE {
|
|
mplsVpnVrfBgpPAtrPeerType InetAddressType,
|
|
mplsVpnVrfBgpPAtrPeer InetAddress,
|
|
mplsVpnVrfBgpPAtrIpAddrPrefixLen Integer32,
|
|
mplsVpnVrfBgpPAtrIpAddrPfxType InetAddressType,
|
|
mplsVpnVrfBgpPAtrIpAddrPrefix InetAddress,
|
|
mplsVpnVrfBgpPAtrOrigin INTEGER,
|
|
mplsVpnVrfBgpPAtrASPathSegment OCTET STRING,
|
|
mplsVpnVrfBgpPAtrNextHopType InetAddressType,
|
|
mplsVpnVrfBgpPAtrNextHop InetAddress,
|
|
mplsVpnVrfBgpPAtrMultiExitDisc Integer32,
|
|
mplsVpnVrfBgpPAtrLocalPref Integer32,
|
|
mplsVpnVrfBgpPAtrAtomicAggregate INTEGER,
|
|
mplsVpnVrfBgpPAtrAggregatorAS Integer32,
|
|
mplsVpnVrfBgpPAtrAggrAddrType InetAddressType,
|
|
mplsVpnVrfBgpPAtrAggregatorAddr InetAddress,
|
|
mplsVpnVrfBgpPAtrCalcLocalPref INTEGER,
|
|
mplsVpnVrfBgpPAtrBest INTEGER,
|
|
mplsVpnVrfBgpPAtrUnknown OCTET STRING
|
|
}
|
|
|
|
mplsVpnVrfBgpPAtrPeerType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the mplsVpnVrfBgpPAtrPeer object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 1 }
|
|
|
|
mplsVpnVrfBgpPAtrPeer OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the peer where the path
|
|
information was learned."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 2 }
|
|
|
|
mplsVpnVrfBgpPAtrIpAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length in bits of the IP address prefix
|
|
in the Network Layer Reachability
|
|
Information field."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 3 }
|
|
|
|
mplsVpnVrfBgpPAtrIpAddrPfxType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the mplsVpnVrfBgpPAtrIpAddrPrefix
|
|
object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 4 }
|
|
|
|
mplsVpnVrfBgpPAtrIpAddrPrefix OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP address prefix in the Network Layer
|
|
Reachability Information field. This object
|
|
is an IP address containing the prefix with
|
|
length specified by mplsVpnVrfBgpPAtrIpAddrPrefixLen.
|
|
Any bits beyond the length specified by
|
|
mplsVpnVrfBgpPAtrIpAddrPrefixLen are zeroed."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 5 }
|
|
|
|
mplsVpnVrfBgpPAtrOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER { igp(1),-- networks are interior
|
|
egp(2),-- networks learned via EGP
|
|
incomplete(3) -- undetermined
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ultimate origin of the path
|
|
information."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 6 }
|
|
|
|
mplsVpnVrfBgpPAtrASPathSegment OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence of AS path segments. Each AS
|
|
path segment is represented by a triple
|
|
<type, length, value>.
|
|
|
|
The type is a 1-octet field which has two
|
|
possible values:
|
|
1 AS_SET: unordered set of ASs a
|
|
route in the UPDATE
|
|
message has traversed
|
|
2 AS_SEQUENCE: ordered set of ASs
|
|
a route in the UPDATE
|
|
message has traversed.
|
|
The length is a 1-octet field containing the
|
|
number of ASs in the value field.
|
|
|
|
The value field contains one or more AS
|
|
numbers, each AS is represented in the octet
|
|
string as a pair of octets according to the
|
|
following algorithm:
|
|
first-byte-of-pair = ASNumber / 256;
|
|
second-byte-of-pair = ASNumber & 255;"
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 7 }
|
|
|
|
mplsVpnVrfBgpPAtrNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the mplsVpnVrfBgpPAtrNextHop object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 8 }
|
|
|
|
mplsVpnVrfBgpPAtrNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the border router that
|
|
should be used for the destination
|
|
network."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 9 }
|
|
|
|
mplsVpnVrfBgpPAtrMultiExitDisc OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This metric is used to discriminate
|
|
between multiple exit points to an
|
|
adjacent autonomous system. A value of -1
|
|
indicates the absence of this attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 10 }
|
|
|
|
mplsVpnVrfBgpPAtrLocalPref OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The originating BGP4 speaker's degree of
|
|
preference for an advertised route. A
|
|
value of -1 indicates the absence of this
|
|
attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 11 }
|
|
|
|
mplsVpnVrfBgpPAtrAtomicAggregate OBJECT-TYPE
|
|
SYNTAX INTEGER { lessSpecificRrouteNotSelected(1),
|
|
lessSpecificRouteSelected(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether or not the local system has
|
|
selected a less specific route without
|
|
selecting a more specific route."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 12 }
|
|
|
|
mplsVpnVrfBgpPAtrAggregatorAS OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS number of the last BGP4 speaker that
|
|
performed route aggregation. A value of
|
|
zero (0) indicates the absence of this
|
|
attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 13 }
|
|
|
|
mplsVpnVrfBgpPAtrAggrAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the mplsVpnVrfBgpPAtrAggrAddr
|
|
object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 14 }
|
|
|
|
mplsVpnVrfBgpPAtrAggregatorAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the last BGP4 speaker
|
|
that performed route aggregation. A value
|
|
of 0.0.0.0 indicates the absence of this
|
|
attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 15 }
|
|
|
|
mplsVpnVrfBgpPAtrCalcLocalPref OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The degree of preference calculated by the
|
|
receiving BGP4 speaker for an advertised
|
|
route. A value of -1 indicates the
|
|
absence of this attribute."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 16 }
|
|
|
|
mplsVpnVrfBgpPAtrBest OBJECT-TYPE
|
|
SYNTAX INTEGER { false(1),-- not chosen as best route
|
|
true(2) -- chosen as best route
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether or not this route
|
|
was chosen as the best BGP4 route."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 17 }
|
|
|
|
mplsVpnVrfBgpPAtrUnknown OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One or more path attributes not understood
|
|
by this BGP4 speaker. Size zero (0)
|
|
indicates the absence of such
|
|
attribute(s). Octets beyond the maximum
|
|
size, if any, are not recorded by this
|
|
object."
|
|
::= { mplsVpnVrfBgpNbrPrefixEntry 18 }
|
|
|
|
-- VRF Security Table
|
|
|
|
mplsVpnVrfSecTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfSecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per MPLS/BGP VPN VRF Table security
|
|
features."
|
|
::= { mplsVpnConf 6 }
|
|
|
|
mplsVpnVrfSecEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfSecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN. Each
|
|
entry in this table is used to indicate security-related
|
|
information for each VRF entry."
|
|
AUGMENTS { mplsVpnVrfEntry }
|
|
::= { mplsVpnVrfSecTable 1 }
|
|
|
|
MplsVpnVrfSecEntry ::= SEQUENCE {
|
|
mplsVpnVrfSecIllegalLblVltns Counter32,
|
|
mplsVpnVrfSecIllegalLblRcvThrsh Unsigned32
|
|
}
|
|
mplsVpnVrfSecIllegalLblVltns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of illegally received labels on this VPN/VRF."
|
|
::= { mplsVpnVrfSecEntry 1 }
|
|
|
|
mplsVpnVrfSecIllegalLblRcvThrsh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of illegally received labels above which this
|
|
notification is issued."
|
|
::= { mplsVpnVrfSecEntry 2 }
|
|
|
|
-- VRF Performance Table
|
|
|
|
mplsVpnVrfPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per MPLS/BGP VPN VRF Table performance
|
|
information."
|
|
::= { mplsVpnPerf 1 }
|
|
|
|
mplsVpnVrfPerfEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
every VRF capable of supporting MPLS/BGP VPN."
|
|
AUGMENTS { mplsVpnVrfEntry }
|
|
::= { mplsVpnVrfPerfTable 1 }
|
|
|
|
MplsVpnVrfPerfEntry ::= SEQUENCE {
|
|
mplsVpnVrfPerfRoutesAdded Counter32,
|
|
mplsVpnVrfPerfRoutesDeleted Counter32,
|
|
mplsVpnVrfPerfCurrNumRoutes Unsigned32
|
|
}
|
|
|
|
mplsVpnVrfPerfRoutesAdded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of routes added to this VPN/VRF over the
|
|
coarse of its lifetime."
|
|
::= { mplsVpnVrfPerfEntry 1 }
|
|
|
|
mplsVpnVrfPerfRoutesDeleted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of routes removed from this VPN/VRF."
|
|
::= { mplsVpnVrfPerfEntry 2 }
|
|
|
|
mplsVpnVrfPerfCurrNumRoutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of routes currently used by this VRF."
|
|
::= { mplsVpnVrfPerfEntry 3 }
|
|
|
|
-- VRF Routing Table
|
|
|
|
mplsVpnVrfRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsVpnVrfRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-interface MPLS/BGP VPN VRF Table
|
|
routing information. Entries in this table define VRF routing
|
|
entries associated with the specified MPLS/VPN interfaces. Note
|
|
that this table contains both BGP and IGP routes, as both may
|
|
appear in the same VRF."
|
|
REFERENCE
|
|
"1. RFC 1213 Section 6.6, The IP Group.
|
|
2. RFC 2096 "
|
|
::= { mplsVpnRoute 1 }
|
|
|
|
mplsVpnVrfRouteEntry OBJECT-TYPE
|
|
SYNTAX MplsVpnVrfRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every route
|
|
present configured (either dynamically or statically) within
|
|
the context of a specific VRF capable of supporting MPLS/BGP
|
|
VPN. The indexing provides an ordering of VRFs per-VPN
|
|
interface."
|
|
INDEX { mplsVpnVrfName, mplsVpnVrfRouteDest,
|
|
mplsVpnVrfRouteMask, mplsVpnVrfRouteTos,
|
|
mplsVpnVrfRouteNextHop }
|
|
::= { mplsVpnVrfRouteTable 1 }
|
|
|
|
MplsVpnVrfRouteEntry ::= SEQUENCE {
|
|
mplsVpnVrfRouteDestAddrType InetAddressType,
|
|
mplsVpnVrfRouteDest InetAddress,
|
|
mplsVpnVrfRouteMaskAddrType InetAddressType,
|
|
mplsVpnVrfRouteMask InetAddress,
|
|
mplsVpnVrfRouteTos Unsigned32,
|
|
mplsVpnVrfRouteNextHopAddrType InetAddressType,
|
|
mplsVpnVrfRouteNextHop InetAddress,
|
|
mplsVpnVrfRouteIfIndex InterfaceIndexOrZero,
|
|
mplsVpnVrfRouteType INTEGER,
|
|
mplsVpnVrfRouteProto INTEGER,
|
|
mplsVpnVrfRouteAge Unsigned32,
|
|
mplsVpnVrfRouteInfo OBJECT IDENTIFIER,
|
|
mplsVpnVrfRouteNextHopAS Unsigned32,
|
|
mplsVpnVrfRouteMetric1 Integer32,
|
|
mplsVpnVrfRouteMetric2 Integer32,
|
|
mplsVpnVrfRouteMetric3 Integer32,
|
|
mplsVpnVrfRouteMetric4 Integer32,
|
|
mplsVpnVrfRouteMetric5 Integer32,
|
|
mplsVpnVrfRouteRowStatus RowStatus,
|
|
mplsVpnVrfRouteStorageType StorageType
|
|
}
|
|
|
|
mplsVpnVrfRouteDestAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of the mplsVpnVrfRouteDest
|
|
entry."
|
|
::= { mplsVpnVrfRouteEntry 1 }
|
|
|
|
mplsVpnVrfRouteDest OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route.
|
|
This object may not take a Multicast (Class D)
|
|
address value.
|
|
|
|
Any assignment (implicit or otherwise) of an
|
|
instance of this object to a value x must be
|
|
rejected if the bit-wise logical-AND of x with
|
|
the value of the corresponding instance of the
|
|
mplsVpnVrfRouteMask object is not equal to x."
|
|
::= { mplsVpnVrfRouteEntry 2 }
|
|
|
|
mplsVpnVrfRouteMaskAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of mplsVpnVrfRouteMask."
|
|
::= { mplsVpnVrfRouteEntry 3 }
|
|
|
|
mplsVpnVrfRouteMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to
|
|
the value in the mplsVpnVrfRouteDest field.
|
|
For those systems that do not support
|
|
arbitrary subnet masks, an agent constructs the
|
|
value of the mplsVpnVrfRouteMask by reference
|
|
to the IP Address Class.
|
|
|
|
Any assignment (implicit or otherwise) of an
|
|
instance of this object to a value x must be
|
|
rejected if the bit-wise logical-AND of x with
|
|
the value of the corresponding instance of the
|
|
mplsVpnVrfRouteDest object is not equal to
|
|
mplsVpnVrfRouteDest."
|
|
::= { mplsVpnVrfRouteEntry 4 }
|
|
|
|
mplsVpnVrfRouteTos OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP TOS Field is used to specify the policy to
|
|
be applied to this route. The encoding of IP TOS
|
|
is as specified by the following convention.
|
|
Zero indicates the default path if no more
|
|
specific policy applies.
|
|
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
| | | |
|
|
| PRECEDENCE | TYPE OF SERVICE | 0 |
|
|
| | | |
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
|
|
IP TOS IP TOS
|
|
Field Policy Field Policy
|
|
Contents Code Contents Code
|
|
0 0 0 0 ==> 0 0 0 0 1 ==> 2
|
|
0 0 1 0 ==> 4 0 0 1 1 ==> 6
|
|
0 1 0 0 ==> 8 0 1 0 1 ==> 10
|
|
0 1 1 0 ==> 12 0 1 1 1 ==> 14
|
|
1 0 0 0 ==> 16 1 0 0 1 ==> 18
|
|
1 0 1 0 ==> 20 1 0 1 1 ==> 22
|
|
1 1 0 0 ==> 24 1 1 0 1 ==> 26
|
|
1 1 1 0 ==> 28 1 1 1 1 ==> 30."
|
|
::= { mplsVpnVrfRouteEntry 5 }
|
|
|
|
mplsVpnVrfRouteNextHopAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of the mplsVpnVrfRouteNextHopAddrType
|
|
object."
|
|
::= { mplsVpnVrfRouteEntry 6 }
|
|
|
|
mplsVpnVrfRouteNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On remote routes, the address of the next
|
|
system en route; Otherwise, 0.0.0.0. ."
|
|
::= { mplsVpnVrfRouteEntry 7 }
|
|
|
|
mplsVpnVrfRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value that identifies the local
|
|
interface through which the next hop of this
|
|
route should be reached. If this value is set to 0,
|
|
this indicates that no interface is associated with
|
|
this route."
|
|
::= { mplsVpnVrfRouteEntry 8 }
|
|
|
|
mplsVpnVrfRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER { other (1), -- not specified
|
|
reject (2), -- route to discard traffic
|
|
local (3), -- local interface
|
|
remote (4) -- remote destination
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of route. Note that local(3) refers
|
|
to a route for which the next hop is the final
|
|
destination; remote(4) refers to a route for
|
|
that the next hop is not the final destination.
|
|
Routes which do not result in traffic forwarding or
|
|
rejection should not be displayed even if the
|
|
implementation keeps them stored internally.
|
|
|
|
reject (2) refers to a route which, if matched,
|
|
discards the message as unreachable. This is used
|
|
in some protocols as a means of correctly aggregating
|
|
routes."
|
|
::= { mplsVpnVrfRouteEntry 9 }
|
|
|
|
mplsVpnVrfRouteProto OBJECT-TYPE
|
|
SYNTAX INTEGER { other (1), -- not specified
|
|
local (2), -- local interface
|
|
netmgmt (3), -- static route
|
|
icmp (4), -- result of ICMP Redirect
|
|
|
|
-- the following are all dynamic
|
|
-- routing protocols
|
|
|
|
egp (5), -- Exterior Gateway Protocol
|
|
ggp (6), -- Gateway-Gateway Protocol
|
|
hello (7), -- FuzzBall HelloSpeak
|
|
rip (8), -- Berkeley RIP or RIP-II
|
|
isIs (9), -- Dual IS-IS
|
|
esIs (10), -- ISO 9542
|
|
ciscoIgrp (11), -- Cisco IGRP
|
|
bbnSpfIgp (12), -- BBN SPF IGP
|
|
ospf (13), -- Open Shortest Path First
|
|
bgp (14), -- Border Gateway Protocol
|
|
idpr (15), -- InterDomain Policy Routing
|
|
ciscoEigrp (16) -- Cisco EIGRP
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this route was
|
|
learned. Inclusion of values for gateway rout-
|
|
ing protocols is not intended to imply that
|
|
hosts should support those protocols."
|
|
::= { mplsVpnVrfRouteEntry 10 }
|
|
|
|
mplsVpnVrfRouteAge OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds since this route was
|
|
last updated or otherwise determined to be
|
|
correct. Note that no semantics of `too old'
|
|
can be implied except through knowledge of the
|
|
routing protocol by which the route was
|
|
learned."
|
|
::= { mplsVpnVrfRouteEntry 11 }
|
|
|
|
mplsVpnVrfRouteInfo OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A reference to MIB definitions specific to the
|
|
particular routing protocol which is responsi-
|
|
ble for this route, as determined by the value
|
|
specified in the route's mplsVpnVrfRouteProto
|
|
value. If this information is not present, its
|
|
value SHOULD be set to the OBJECT IDENTIFIER
|
|
{ 0 0 }, which is a syntactically valid object
|
|
identif-ier, and any implementation conforming
|
|
to ASN.1 and the Basic Encoding Rules must be
|
|
able to generate and recognize this value."
|
|
::= { mplsVpnVrfRouteEntry 12 }
|
|
|
|
mplsVpnVrfRouteNextHopAS OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Autonomous System Number of the Next Hop.
|
|
The semantics of this object are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. When this object is
|
|
unknown or not relevant its value should be set
|
|
to zero."
|
|
::= { mplsVpnVrfRouteEntry 13 }
|
|
|
|
mplsVpnVrfRouteMetric1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 14 }
|
|
|
|
mplsVpnVrfRouteMetric2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 15 }
|
|
|
|
mplsVpnVrfRouteMetric3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 16 }
|
|
|
|
mplsVpnVrfRouteMetric4 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 17 }
|
|
|
|
mplsVpnVrfRouteMetric5 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route.
|
|
The semantics of this metric are determined by
|
|
the routing-protocol specified in the route's
|
|
mplsVpnVrfRouteProto value. If this metric is not
|
|
used, its value should be set to -1."
|
|
::= { mplsVpnVrfRouteEntry 18 }
|
|
|
|
mplsVpnVrfRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status for this table. It is used according
|
|
to row installation and removal conventions."
|
|
::= { mplsVpnVrfRouteEntry 19 }
|
|
|
|
mplsVpnVrfRouteStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Storage type value."
|
|
::= { mplsVpnVrfRouteEntry 20 }
|
|
|
|
-- MPLS/BGP VPN Notifications
|
|
|
|
mplsVrfIfUp NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnIfConfRowStatus,
|
|
mplsVpnVrfOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when:
|
|
a. The ifOperStatus of an interface associated with a VRF
|
|
changes to the up(1) state.
|
|
b. When an interface with ifOperStatus = up(1) is
|
|
associated with a VRF."
|
|
::= { mplsVpnNotifications 1 }
|
|
|
|
mplsVrfIfDown NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnIfConfRowStatus,
|
|
mplsVpnVrfOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when:
|
|
a. The ifOperStatus of an interface associated with a VRF
|
|
changes to the down(1) state.
|
|
b. When an interface with ifOperStatus = up(1) state is
|
|
disassociated with a VRF."
|
|
::= { mplsVpnNotifications 2 }
|
|
|
|
mplsNumVrfRouteMidThreshExceeded NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnVrfPerfCurrNumRoutes,
|
|
mplsVpnVrfConfMidRouteThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the number of routes
|
|
contained by the specified VRF exceeds the value indicated by
|
|
mplsVrfMidRouteThreshold. A single notification MUST be generated
|
|
when this threshold is exceeded, and no other notifications of
|
|
this type should be issued until the value of
|
|
mplsVpnVrfPerfCurrNumRoutes has fallen below that of
|
|
mplsVpnVrfConfMidRouteThreshold."
|
|
::= { mplsVpnNotifications 3 }
|
|
|
|
mplsNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnVrfPerfCurrNumRoutes,
|
|
mplsVpnVrfConfHighRouteThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the number of routes
|
|
contained by the specified VRF reaches or attempts to exceed
|
|
the maximum allowed value as indicated by
|
|
mplsVrfMaxRouteThreshold. In cases where
|
|
mplsVpnVrfConfHighRouteThreshold is set to the same value
|
|
as mplsVpnVrfConfMaxRoutes, mplsVpnVrfConfHighRouteThreshold
|
|
need not be exceeded; rather, just reached for this notification
|
|
to be issued.
|
|
|
|
Note that mplsVpnVrfConfRouteMaxThreshTime denotes the interval at
|
|
which the this notification will be re-issued after the maximum value
|
|
has been exceeded (or reached if mplsVpnVrfConfMaxRoutes and
|
|
mplsVpnVrfConfHighRouteThreshold are equal) and the initial
|
|
notification has been issued. This value is intended to prevent continuous
|
|
generation of notifications by an agent in the event that routes are
|
|
continually added to a VRF after it has reached its maximum value. The
|
|
default value is 10 minutes. If this value is set to 0, the agent should
|
|
only issue a single notification at the time that the maximum threshold has
|
|
been reached, and should not issue any more notifications until the value
|
|
of routes has fallen below the configured threshold value."
|
|
::= { mplsVpnNotifications 4 }
|
|
|
|
mplsNumVrfSecIllglLblThrshExcd NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnVrfSecIllegalLblVltns }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the number of illegal
|
|
label violations on a VRF as indicated by
|
|
mplsVpnVrfSecIllegalLblVltns has exceeded
|
|
mplsVpnVrfSecIllegalLblRcvThrsh. The threshold is not
|
|
included in the varbind here because the value of
|
|
mplsVpnVrfSecIllegalLblVltns should be one greater than
|
|
the threshold at the time this notification is issued."
|
|
::= { mplsVpnNotifications 5 }
|
|
|
|
mplsNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE
|
|
OBJECTS { mplsVpnVrfPerfCurrNumRoutes,
|
|
mplsVpnVrfConfHighRouteThreshold
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated only after the number of routes
|
|
contained by the specified VRF reaches or attempts to exceed
|
|
the maximum allowed value as indicated by
|
|
mplsVrfMaxRouteThreshold, and then falls below this value. The
|
|
emission of this notification informs the operator that the
|
|
error condition has been cleared without the operator having to
|
|
query the device.
|
|
|
|
Note that mplsVpnVrfConfRouteMaxThreshTime denotes the interval at
|
|
which the the mplsNumVrfRouteMaxThreshExceeded notification will
|
|
be re-issued after the maximum value has been exceeded (or reached
|
|
if mplsVpnVrfConfMaxRoutes and mplsVpnVrfConfHighRouteThreshold
|
|
are equal) and the initial notification has been issued. Therefore,
|
|
the generation of this notification should also be emitted with this
|
|
same frequency (assuming that the error condition is cleared).
|
|
Specifically, if the error condition is reached and cleared several
|
|
times during the period of time specified in
|
|
mplsVpnVrfConfRouteMaxThreshTime, only a single notification will be
|
|
issued to indicate the first instance of the error condition as well
|
|
as the first time the error condition is cleared.
|
|
|
|
This behavior is intended to prevent continuous generation of notifications
|
|
by an agent in the event that routes are continually added and removed
|
|
to/from a VRF after it has reached its maximum value. The
|
|
default value is 10 minutes. If this value is set to 0, the agent should
|
|
issue a notification whenever the maximum threshold has
|
|
been cleared."
|
|
::= { mplsVpnNotifications 6 }
|
|
|
|
-- Conformance Statement
|
|
mplsVpnGroups
|
|
OBJECT IDENTIFIER ::= { mplsVpnConformance 1 }
|
|
|
|
mplsVpnCompliances
|
|
OBJECT IDENTIFIER ::= { mplsVpnConformance 2 }
|
|
|
|
-- Module Compliance
|
|
|
|
mplsVpnModuleCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that support the
|
|
MPLS VPN MIB."
|
|
MODULE -- this module
|
|
|
|
-- The mandatory groups have to be implemented
|
|
-- by all LSRs supporting MPLS BGP/VPNs. However,
|
|
-- they may all be supported
|
|
-- as read-only objects in the case where manual
|
|
-- configuration is unsupported.
|
|
|
|
MANDATORY-GROUPS { mplsVpnScalarGroup,
|
|
mplsVpnVrfGroup,
|
|
mplsVpnIfGroup,
|
|
mplsVpnPerfGroup,
|
|
mplsVpnVrfRouteGroup,
|
|
mplsVpnVrfBgpNbrGroup,
|
|
mplsVpnVrfRouteTargetGroup,
|
|
mplsVpnVrfBgpPrefixGroup,
|
|
mplsVpnSecGroup,
|
|
mplsVpnNotificationGroup
|
|
}
|
|
|
|
::= { mplsVpnCompliances 1 }
|
|
|
|
-- Units of conformance.
|
|
|
|
mplsVpnScalarGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnConfiguredVrfs,
|
|
mplsVpnActiveVrfs,
|
|
mplsVpnConnectedInterfaces,
|
|
mplsVpnNotificationEnable,
|
|
mplsVpnVrfConfMaxPossibleRoutes,
|
|
mplsVpnVrfConfRouteMaxThreshTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of scalar objects required for MPLS VPN
|
|
management."
|
|
::= { mplsVpnGroups 1 }
|
|
|
|
mplsVpnVrfGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfVpnId,
|
|
mplsVpnVrfDescription,
|
|
mplsVpnVrfRouteDistinguisher,
|
|
mplsVpnVrfCreationTime,
|
|
mplsVpnVrfOperStatus,
|
|
mplsVpnVrfActiveInterfaces,
|
|
mplsVpnVrfAssociatedInterfaces,
|
|
mplsVpnVrfConfMidRouteThreshold,
|
|
mplsVpnVrfConfHighRouteThreshold,
|
|
mplsVpnVrfConfMaxRoutes,
|
|
mplsVpnVrfConfLastChanged,
|
|
mplsVpnVrfConfRowStatus,
|
|
mplsVpnVrfConfStorageType
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN VRF
|
|
management."
|
|
::= { mplsVpnGroups 2 }
|
|
|
|
mplsVpnIfGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnIfLabelEdgeType,
|
|
mplsVpnIfVpnClassification,
|
|
mplsVpnIfVpnRouteDistProtocol,
|
|
mplsVpnIfConfStorageType,
|
|
mplsVpnIfConfRowStatus
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN interface
|
|
management."
|
|
::= { mplsVpnGroups 3 }
|
|
|
|
mplsVpnPerfGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfPerfRoutesAdded,
|
|
mplsVpnVrfPerfRoutesDeleted,
|
|
mplsVpnVrfPerfCurrNumRoutes
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN
|
|
performance information."
|
|
::= { mplsVpnGroups 4 }
|
|
|
|
mplsVpnVrfBgpNbrGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfBgpNbrRole,
|
|
mplsVpnVrfBgpNbrType,
|
|
mplsVpnVrfBgpNbrAddr,
|
|
mplsVpnVrfBgpNbrRowStatus,
|
|
mplsVpnVrfBgpNbrStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN
|
|
bgp neighbor-related information."
|
|
::= { mplsVpnGroups 5 }
|
|
|
|
mplsVpnVrfBgpPrefixGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsVpnVrfBgpPAtrOrigin,
|
|
mplsVpnVrfBgpPAtrASPathSegment,
|
|
mplsVpnVrfBgpPAtrNextHop,
|
|
mplsVpnVrfBgpPAtrMultiExitDisc,
|
|
mplsVpnVrfBgpPAtrLocalPref,
|
|
mplsVpnVrfBgpPAtrAtomicAggregate,
|
|
mplsVpnVrfBgpPAtrAggregatorAS,
|
|
mplsVpnVrfBgpPAtrAggregatorAddr,
|
|
mplsVpnVrfBgpPAtrCalcLocalPref,
|
|
mplsVpnVrfBgpPAtrBest,
|
|
mplsVpnVrfBgpPAtrUnknown,
|
|
mplsVpnVrfBgpPAtrPeerType,
|
|
mplsVpnVrfBgpPAtrIpAddrPfxType,
|
|
mplsVpnVrfBgpPAtrNextHopType,
|
|
mplsVpnVrfBgpPAtrAggrAddrType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN
|
|
bgp neighbor-related information."
|
|
::= { mplsVpnGroups 6 }
|
|
|
|
mplsVpnSecGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfSecIllegalLblVltns,
|
|
mplsVpnVrfSecIllegalLblRcvThrsh }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS VPN
|
|
security-related information."
|
|
::= { mplsVpnGroups 7 }
|
|
|
|
mplsVpnVrfRouteGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfRouteDestAddrType,
|
|
mplsVpnVrfRouteMaskAddrType,
|
|
mplsVpnVrfRouteNextHop,
|
|
mplsVpnVrfRouteNextHopAddrType,
|
|
mplsVpnVrfRouteIfIndex,
|
|
mplsVpnVrfRouteType,
|
|
mplsVpnVrfRouteProto,
|
|
mplsVpnVrfRouteAge,
|
|
mplsVpnVrfRouteInfo,
|
|
mplsVpnVrfRouteNextHopAS,
|
|
mplsVpnVrfRouteMetric1,
|
|
mplsVpnVrfRouteMetric2,
|
|
mplsVpnVrfRouteMetric3,
|
|
mplsVpnVrfRouteMetric4,
|
|
mplsVpnVrfRouteMetric5,
|
|
mplsVpnVrfRouteRowStatus,
|
|
mplsVpnVrfRouteStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for VRF route table management."
|
|
::= { mplsVpnGroups 8 }
|
|
|
|
mplsVpnVrfRouteTargetGroup OBJECT-GROUP
|
|
OBJECTS { mplsVpnVrfRouteTargetDescr,
|
|
mplsVpnVrfRouteTarget,
|
|
mplsVpnVrfRouteTargetRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for VRF route target management."
|
|
::= { mplsVpnGroups 9 }
|
|
|
|
mplsVpnNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { mplsVrfIfUp,
|
|
mplsVrfIfDown,
|
|
mplsNumVrfRouteMidThreshExceeded,
|
|
mplsNumVrfRouteMaxThreshExceeded,
|
|
mplsNumVrfSecIllglLblThrshExcd,
|
|
mplsNumVrfRouteMaxThreshCleared
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for MPLS VPN notifications."
|
|
::= { mplsVpnGroups 10 }
|
|
|
|
-- End of MPLS-VPN-MIB
|
|
END
|
|
|
|
--
|
|
-- Copyright (C) The Internet Society (2000). All Rights Reserved.
|
|
-- This document and translations of it may be copied and furnished to
|
|
-- others, and derivative works that comment on or otherwise explain it or
|
|
-- assist in its implementation may be prepared, copied, published and
|
|
-- distributed, in whole or in part, without restriction of any kind,
|
|
-- provided that the above copyright notice and this paragraph are included
|
|
-- on all such copies and derivative works. However, this document itself
|
|
-- may not be modified in any way, such as by removing the copyright notice
|
|
-- or references to the Internet Society or other Internet organizations,
|
|
-- except as needed for the purpose of developing Internet standards in
|
|
-- which case the procedures for copyrights defined in the Internet
|
|
-- Standards process must be followed, or as required to translate it into
|
|
-- languages other than English.
|
|
--
|
|
-- The limited permissions granted above are perpetual and will not be
|
|
-- revoked by the Internet Society or its successors or assigns. This
|
|
-- document and the information contained herein is provided on an "AS IS"
|
|
-- basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE
|
|
-- DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
|
|
-- TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE
|
|
-- ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
|
|
-- PARTICULAR PURPOSE.
|