Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2472 lines
95 KiB
Text
2472 lines
95 KiB
Text
CTRON-DECIV-ROUTER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ctron-deciv-router-mib.txt
|
|
-- Revision: 1.01.03
|
|
-- Part Number: 2170985
|
|
-- Date: August 11, 1995
|
|
|
|
-- Cabletron Systems, Inc.
|
|
-- 35 Industrial Way, P.O. Box 5005
|
|
-- Rochester, NH 03867-0505
|
|
-- (603) 332-9400
|
|
-- support@ctron.com
|
|
|
|
-- This module provides authoritative definitions for Cabletron's
|
|
-- enterprise specific DECnet Routing Services MIB.
|
|
--
|
|
-- This module will be extended as required.
|
|
|
|
-- Cabletron Systems reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Cabletron
|
|
-- Systems has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Cabletron products.
|
|
|
|
-- Copyright August 95 Cabletron Systems
|
|
|
|
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
nwRtrProtoSuites
|
|
FROM ROUTER-OIDS
|
|
Counter, TimeTicks, Gauge
|
|
FROM RFC1155-SMI;
|
|
|
|
|
|
-- The DECnet Phase IV Router Group.
|
|
|
|
nwDecIVRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 3 }
|
|
|
|
nwDecIVMibs OBJECT IDENTIFIER ::= { nwDecIVRouter 1 }
|
|
nwDecIVComponents OBJECT IDENTIFIER ::= { nwDecIVRouter 2 }
|
|
|
|
|
|
-- DECnet Phase IV Router Component Groups
|
|
|
|
nwDecIVSystem OBJECT IDENTIFIER ::= { nwDecIVComponents 1 }
|
|
nwDecIVForwarding OBJECT IDENTIFIER ::= { nwDecIVComponents 2 }
|
|
nwDecIVTopology OBJECT IDENTIFIER ::= { nwDecIVComponents 4 }
|
|
nwDecIVFib OBJECT IDENTIFIER ::= { nwDecIVComponents 5 }
|
|
nwDecIVEndSystems OBJECT IDENTIFIER ::= { nwDecIVComponents 6 }
|
|
nwDecIVAccessControl OBJECT IDENTIFIER ::= { nwDecIVComponents 7 }
|
|
nwDecIVFilters OBJECT IDENTIFIER ::= { nwDecIVComponents 8 }
|
|
nwDecIVRedirector OBJECT IDENTIFIER ::= { nwDecIVComponents 9 }
|
|
nwDecIVEvent OBJECT IDENTIFIER ::= { nwDecIVComponents 10 }
|
|
nwDecIVWorkGroup OBJECT IDENTIFIER ::= { nwDecIVComponents 11 }
|
|
|
|
|
|
-- DECnet Phase IV Router System Groups
|
|
|
|
nwDecIVSysConfig OBJECT IDENTIFIER ::= { nwDecIVSystem 1 }
|
|
nwDecIVSysAdministration OBJECT IDENTIFIER ::= { nwDecIVSystem 2 }
|
|
|
|
|
|
-- DECnet Phase IV Router Forwarding Groups
|
|
|
|
nwDecIVFwdSystem OBJECT IDENTIFIER ::= { nwDecIVForwarding 1 }
|
|
nwDecIVFwdInterfaces OBJECT IDENTIFIER ::= { nwDecIVForwarding 2 }
|
|
|
|
nwDecIVFwdCounters OBJECT IDENTIFIER ::= { nwDecIVFwdSystem 1 }
|
|
nwDecIVFwdIfConfig OBJECT IDENTIFIER ::= { nwDecIVFwdInterfaces 1 }
|
|
nwDecIVFwdIfCounters OBJECT IDENTIFIER ::= { nwDecIVFwdInterfaces 2 }
|
|
|
|
|
|
-- DECnet Phase IV Router Routing Groups
|
|
|
|
nwDecIVDistanceVector OBJECT IDENTIFIER ::= { nwDecIVTopology 1 }
|
|
nwDecIVLinkState OBJECT IDENTIFIER ::= { nwDecIVTopology 2 }
|
|
|
|
nwDecIVProto OBJECT IDENTIFIER ::= { nwDecIVDistanceVector 1 }
|
|
nwDecIVProtoSystem OBJECT IDENTIFIER ::= { nwDecIVProto 1 }
|
|
nwDecIVProtoInterface OBJECT IDENTIFIER ::= { nwDecIVProto 2 }
|
|
|
|
nwDecIVProtoConfig OBJECT IDENTIFIER ::= { nwDecIVProtoSystem 1 }
|
|
nwDecIVProtoCounters OBJECT IDENTIFIER ::= { nwDecIVProtoSystem 2 }
|
|
nwDecIVProtoIfConfig OBJECT IDENTIFIER ::= { nwDecIVProtoInterface 1 }
|
|
nwDecIVProtoIfCounters OBJECT IDENTIFIER ::= { nwDecIVProtoInterface 2 }
|
|
|
|
-- DECnet Phase IV Router Host End Systems Groups
|
|
|
|
nwDecIVHostsSystem OBJECT IDENTIFIER ::= { nwDecIVEndSystems 1 }
|
|
nwDecIVHostsInterfaces OBJECT IDENTIFIER ::= { nwDecIVEndSystems 2 }
|
|
nwDecIVHostsToMedia OBJECT IDENTIFIER ::= { nwDecIVEndSystems 3 }
|
|
|
|
|
|
-- DECnet Phase IV Router Access Control Group
|
|
|
|
|
|
-- DECnet Phase IV Router Event Log Group
|
|
|
|
nwDecIVEventLogConfig OBJECT IDENTIFIER ::= { nwDecIVEvent 1 }
|
|
nwDecIVEventLogFilterTable OBJECT IDENTIFIER ::= { nwDecIVEvent 2 }
|
|
nwDecIVEventLogTable OBJECT IDENTIFIER ::= { nwDecIVEvent 3 }
|
|
|
|
-- DECnet Phase IV Router Work-Group Group
|
|
|
|
|
|
DecIVAddress ::= OCTET STRING
|
|
-- MacAddress ::= OCTET STRING (SIZE (6))
|
|
|
|
|
|
-- DECnet Phase IV MIB Group
|
|
-- This group contains information about the revision level of this
|
|
-- MIB within the device. It allows verification of the released
|
|
-- version without having to read other objects.
|
|
|
|
nwDecIVMibRevText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the DECnet Phase
|
|
IV MIB in textual format."
|
|
::= { nwDecIVMibs 1 }
|
|
|
|
|
|
-- DECnet Phase IV Router System Group
|
|
-- This group contains the objects related to the DECnet Phase IV Router at a
|
|
-- global device-wide level.
|
|
|
|
-- DECnet Phase IV System Configuration Group
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the DECnet Phase IV routing services at a global,
|
|
-- device-wide level.
|
|
|
|
nwDecIVSysRouterId OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DECnet Address used to uniquely identify the host (device)
|
|
running DECnet Phase IV Routing Services. Since DECnet Phase IV
|
|
uses a single address to identify the host and all of its router
|
|
ports, rather than using an address per router port,
|
|
nwDecIVSysRouterID is the DECnet node address for all the router
|
|
ports on the device."
|
|
::= { nwDecIVSysConfig 1 }
|
|
|
|
nwDecIVNodeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- not configured
|
|
routing-iv(2), -- level 1 router
|
|
area(3) -- level 2 router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the node type. Setting this value to 2, (routing-iv),
|
|
establishes the Routing Services-enabled device as a DECnet
|
|
Level 1, intra-area router. Setting this value to 2, establishes
|
|
the Routing Services-enabled device as a DECnet Phase IV Level 2,
|
|
or inter-area router."
|
|
DEFVAL { routing-iv }
|
|
::= { nwDecIVSysConfig 2 }
|
|
|
|
nwDecIVMaxNodes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of DECnet nodes allowed within an
|
|
area."
|
|
DEFVAL { 1023 }
|
|
::= { nwDecIVSysConfig 3 }
|
|
|
|
nwDecIVMaxBRA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of router adjacencies supported by
|
|
this node."
|
|
DEFVAL { 16 }
|
|
::= { nwDecIVSysConfig 4 }
|
|
|
|
nwDecIVMaxBEA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of endnode adjacencies supported
|
|
by this node."
|
|
DEFVAL { 64 }
|
|
::= { nwDecIVSysConfig 5 }
|
|
|
|
nwDecIVMaxHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of hops allowed for a valid route
|
|
within the area. Any intra-area route consisting of a greater
|
|
number of hops than specified by nwDecIVMaxHops is considered
|
|
unreachable."
|
|
DEFVAL { 30 }
|
|
::= { nwDecIVSysConfig 6 }
|
|
|
|
nwDecIVMaxCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum cost allowed for a valid route within the
|
|
area. Any intra-area route with a cost greater than nwDecIVMaxCost
|
|
is considered unreachable."
|
|
DEFVAL { 1022 }
|
|
::= { nwDecIVSysConfig 7 }
|
|
|
|
nwDecIVMaxVisits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of intra-area hops a packet can be
|
|
forwarded. A packet is dropped once it has been forwarded
|
|
nwDecIVMaxVisits."
|
|
DEFVAL { 63 }
|
|
::= { nwDecIVSysConfig 8 }
|
|
|
|
nwDecIVNonBroadcastTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the periodic interval (in seconds) at which DECnet
|
|
Routing Services advertises its route table, on any non-broadcast
|
|
networks attached to any router port configured and enabled for
|
|
DECnet Phase IV Routing Services."
|
|
DEFVAL { 1000 }
|
|
::= { nwDecIVSysConfig 9 }
|
|
|
|
nwDecIVBroadcastTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the periodic interval (in seconds) at which DECnet
|
|
Routing Services advertises its route table on any multi-access
|
|
broadcast networks attached to any router port configured and
|
|
enabled for DECnet Phase IV Routing Services."
|
|
DEFVAL { 1000 }
|
|
::= { nwDecIVSysConfig 10 }
|
|
|
|
nwDecIVAreas OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of areas allowed within a Level 2
|
|
(inter-area)routing domain."
|
|
DEFVAL { 63 }
|
|
::= { nwDecIVSysConfig 11 }
|
|
|
|
nwDecIVMaxAreaHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum number of areas that can be hopped by
|
|
a valid inter-area route. Any inter-area route requiring a
|
|
greater number of areas to be hopped than specified by
|
|
nwDecIVMaxAreaHops is considered invalid."
|
|
DEFVAL { 30 }
|
|
::= { nwDecIVSysConfig 12 }
|
|
|
|
nwDecIVMaxAreaCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum cost allowed for a valid Level 2
|
|
(inter-area) route. Any inter-area route with a cost greater than
|
|
nwDecIVMaxAreaCost is considered unreachable."
|
|
DEFVAL { 1022 }
|
|
::= { nwDecIVSysConfig 13 }
|
|
|
|
-- DECnet Phase IV System Administration Group
|
|
nwDecIVSysAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown DECnet routing services
|
|
enabled(3) -- startup DECnet routing services
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of DECnet Phase IV Routing Services,
|
|
system-wide. Enabled (3) causes DECnet Phase IV system-wide Routing
|
|
Services to become active on all router ports configured and enabled
|
|
for DECnet Phase IV Routing Services. Disabled (2) causes DECnet
|
|
Phase IV Routing Services to become inactive system-wide."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVSysAdministration 1 }
|
|
|
|
nwDecIVSysOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of DECnet Phase IV
|
|
Routing Services system-wide. The value of nwDecIVSysOperStatus
|
|
indicates any problem with your DECnet Phase IV Routing Services
|
|
configuration. A value of 6 indicates that regardless of the value
|
|
of nwDecIVSysAdminStatus, DECnet Phase IV Routing Services is not
|
|
operating because of an invalid configuration."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVSysAdministration 2 }
|
|
|
|
nwDecIVSysAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets DECnet Phase IV Routing Services, system-wide. Reset (2)
|
|
forces a restart of DECnet Phase IV Routing Services without a
|
|
graceful shutdown on any active router ports and without affecting
|
|
any other routing services."
|
|
DEFVAL { other }
|
|
::= { nwDecIVSysAdministration 3 }
|
|
|
|
nwDecIVSysOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVSysOperStatus has been in it's current state."
|
|
::= { nwDecIVSysAdministration 4 }
|
|
|
|
nwDecIVSysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the DECnet Phase IV Routing
|
|
Services firmware, in textual format."
|
|
::= { nwDecIVSysAdministration 5 }
|
|
|
|
|
|
-- DECnet Phase IV Forwarding Group
|
|
-- This group contains the managed objects used to setup and configure
|
|
-- the DECnet Phase IV router network router ports for packet forwarding as well as
|
|
-- the aggregate and per-interface DECnet Phase IV packet forwarding counters.
|
|
|
|
-- DECnet Phase IV System-wide Packet Forwarding Counters
|
|
|
|
nwDecIVFwdCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- counters off
|
|
enabled(3) -- counters on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (system-wide)
|
|
DECnet packet and byte counters. Enabled (3) causes these counters
|
|
to become active. Disabled (2) causes these counters to become
|
|
inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVFwdCounters 1 }
|
|
|
|
nwDecIVFwdCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) DECnet packet and byte counters.
|
|
Reset (2) resets the DECnet aggregate counters to 0.
|
|
nwDecIVFwdCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwDecIVFwdCounters 2 }
|
|
|
|
nwDecIVFwdCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
DecIVFwdCtrOperStatus has been in the current state."
|
|
::= { nwDecIVFwdCounters 3 }
|
|
|
|
nwDecIVFwdCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
received, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 4 }
|
|
|
|
nwDecIVFwdCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
transmitted, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 5 }
|
|
|
|
nwDecIVFwdCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
forwarded, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 6 }
|
|
|
|
nwDecIVFwdCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
administratively filtered, system-wide, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 7 }
|
|
|
|
nwDecIVFwdCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 8 }
|
|
|
|
nwDecIVFwdCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
|
|
because of addressing errors in the DECnet header."
|
|
::= { nwDecIVFwdCounters 9 }
|
|
|
|
nwDecIVFwdCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
|
|
because an invalid packet length is contained in the DECnet header."
|
|
::= { nwDecIVFwdCounters 10 }
|
|
|
|
nwDecIVFwdCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
|
|
because of an invalid DECnet header."
|
|
::= { nwDecIVFwdCounters 11 }
|
|
|
|
nwDecIVFwdCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been received, system-wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 12 }
|
|
|
|
nwDecIVFwdCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been transmitted, system-wide, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 13 }
|
|
|
|
nwDecIVFwdCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets
|
|
that have been forwarded, system-wide, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 14 }
|
|
|
|
nwDecIVFwdCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been administratively filtered, system-wide, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 15 }
|
|
|
|
nwDecIVFwdCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been discarded, system wide, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 16 }
|
|
|
|
nwDecIVFwdCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
successfully delivered to the local host, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 17 }
|
|
|
|
nwDecIVFwdCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
transmitted by the local host, during nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 18 }
|
|
|
|
nwDecIVFwdCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded by the local host, during nwDecIVFwdCtrOperationalTime,
|
|
due to a lack of host resources."
|
|
::= { nwDecIVFwdCounters 19 }
|
|
|
|
nwDecIVFwdCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been received by the local host, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 20 }
|
|
|
|
nwDecIVFwdCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been transmitted by the local host, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdCounters 21 }
|
|
|
|
nwDecIVFwdCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that have
|
|
been discarded by the local host, during
|
|
nwDecIVFwdCtrOperationalTime, due to a lack of host resources."
|
|
::= { nwDecIVFwdCounters 22 }
|
|
|
|
|
|
-- DECnet Phase IV Forwarding Interface Table
|
|
nwDecIVFwdIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. This table is
|
|
indexed by nwDecIVFwdIfIndex, which indicates the value of MIB 2
|
|
ifIndex, which identifies the router port for which each entry exists."
|
|
::= { nwDecIVFwdIfConfig 1 }
|
|
|
|
nwDecIVFwdIfEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the DECnet Phase IV Routing Services
|
|
configuration for the router port for which the entry exists."
|
|
INDEX { nwDecIVFwdIfIndex }
|
|
::= { nwDecIVFwdIfTable 1 }
|
|
|
|
NwDecIVFwdIfEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVFwdIfIndex INTEGER,
|
|
nwDecIVFwdIfAdminStatus INTEGER,
|
|
nwDecIVFwdIfOperStatus INTEGER,
|
|
nwDecIVFwdIfOperationalTime TimeTicks,
|
|
nwDecIVFwdIfControl INTEGER,
|
|
nwDecIVFwdIfMtu INTEGER,
|
|
nwDecIVFwdIfForwarding INTEGER,
|
|
nwDecIVFwdIfFrameType INTEGER,
|
|
nwDecIVFwdIfAclIdentifier INTEGER,
|
|
nwDecIVFwdIfAclStatus INTEGER,
|
|
nwDecIVFwdIfCacheControl INTEGER,
|
|
nwDecIVFwdIfCacheEntries Counter,
|
|
nwDecIVFwdIfCacheHits Counter,
|
|
nwDecIVFwdIfCacheMisses Counter
|
|
}
|
|
|
|
nwDecIVFwdIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfEntry 1 }
|
|
|
|
nwDecIVFwdIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of DECnet Phase IV Routing Services
|
|
on the router port for which the entry exists. Enabled (3) causes
|
|
DECnet Phase IV Routing Services to become active. Disabled (2)
|
|
causes it to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVFwdIfEntry 2 }
|
|
|
|
nwDecIVFwdIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of DECnet Phase IV
|
|
Routing Services on the router port for which the entry exists.
|
|
The value of nwDecIVFwdIfOperStatus indicates any problem with the
|
|
configuration of DECnet Phase IV Routing Services on the router port.
|
|
value of 6 indicates that regardless of the value of
|
|
nwDecIVFwdIfAdminStatus, DECnet Phase IV Routing Services is not
|
|
operating because of an invalid port-level configuration."
|
|
::= { nwDecIVFwdIfEntry 3 }
|
|
|
|
nwDecIVFwdIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVFwdIfOperStatus has been in its current state."
|
|
::= { nwDecIVFwdIfEntry 4 }
|
|
|
|
nwDecIVFwdIfControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
add(2), -- add this entry
|
|
delete(3) -- delete this entry
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object,
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { add }
|
|
::= { nwDecIVFwdIfEntry 5 }
|
|
|
|
nwDecIVFwdIfMtu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Maximum Transmission Unit (MTU) for DECnet packets on
|
|
the router port for which the entry exists. This includes the DECnet
|
|
header and data, but does not include framing."
|
|
DEFVAL { 1500 }
|
|
::= { nwDecIVFwdIfEntry 6 }
|
|
|
|
nwDecIVFwdIfForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not forwarding
|
|
enabled(3) -- forwarding
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the forwarding of DECnet packets on the router port for
|
|
which the entry exists. Enabled (3) causes DECnet packets to be
|
|
forwarded. Disabled (2) prevents DECnet packets from being forwarded."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVFwdIfEntry 7 }
|
|
|
|
nwDecIVFwdIfFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- ethernet, fddi, and token ring
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encaptrsnap(14), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special media, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type for DECnet packets forwarded on the router
|
|
port for which the entry exists. Some frame types are only valid for
|
|
specific media types. The comments reflect those valid media types."
|
|
DEFVAL { ethernet }
|
|
::= { nwDecIVFwdIfEntry 8 }
|
|
|
|
nwDecIVFwdIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the access control list in
|
|
effect for DECnet packets being routed on the router port for which
|
|
the entry exists. A value of 0 indicates that no access control list
|
|
is in effect."
|
|
DEFVAL { 0 }
|
|
::= { nwDecIVFwdIfEntry 9 }
|
|
|
|
nwDecIVFwdIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- do not apply nwDecIVFwdIfAclIdentifier
|
|
enabled(3) -- apply nwDecIVFwdIfAclIdentifier
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of any access control list configured
|
|
for DECnet traffic on the router port for which the entry exists.
|
|
Enabled (3) applies the access control list indicated by the value
|
|
of nwDecIVFwdIfAclIdentifier to all DECnet traffic being routed on
|
|
the port. Disabled (2) prevents the access control list from being
|
|
applied."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVFwdIfEntry 10 }
|
|
|
|
nwDecIVFwdIfCacheControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the followin
|
|
disable(2), -- caching disabled
|
|
enable(3) -- caching enabled
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { enable }
|
|
::= { nwDecIVFwdIfEntry 11 }
|
|
|
|
nwDecIVFwdIfCacheEntries OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common
|
|
object inherited from the MIB framework used to provide a
|
|
common management interface to all the Cabletron Routing
|
|
Services protocol-specific MIBs. Setting this object has no
|
|
effect."
|
|
::= { nwDecIVFwdIfEntry 12 }
|
|
|
|
nwDecIVFwdIfCacheHits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
::= { nwDecIVFwdIfEntry 13 }
|
|
|
|
nwDecIVFwdIfCacheMisses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
::= { nwDecIVFwdIfEntry 14 }
|
|
|
|
|
|
-- DECnet Phase IV Forwarding Interfaces Counter Table
|
|
nwDecIVFwdIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port configured and
|
|
enabled for DECnet Phase IV Routing Services."
|
|
::= { nwDecIVFwdIfCounters 1 }
|
|
|
|
nwDecIVFwdIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count of DECnet
|
|
packets on each router port for which the entry exists."
|
|
INDEX { nwDecIVFwdIfCtrIfIndex }
|
|
::= { nwDecIVFwdIfCtrTable 1 }
|
|
|
|
NwDecIVFwdIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVFwdIfCtrIfIndex INTEGER,
|
|
nwDecIVFwdIfCtrAdminStatus INTEGER,
|
|
nwDecIVFwdIfCtrReset INTEGER,
|
|
nwDecIVFwdIfCtrOperationalTime TimeTicks,
|
|
nwDecIVFwdIfCtrInPkts Counter,
|
|
nwDecIVFwdIfCtrOutPkts Counter,
|
|
nwDecIVFwdIfCtrFwdPkts Counter,
|
|
nwDecIVFwdIfCtrFilteredPkts Counter,
|
|
nwDecIVFwdIfCtrDiscardPkts Counter,
|
|
nwDecIVFwdIfCtrAddrErrPkts Counter,
|
|
nwDecIVFwdIfCtrLenErrPkts Counter,
|
|
nwDecIVFwdIfCtrHdrErrPkts Counter,
|
|
nwDecIVFwdIfCtrInBytes Counter,
|
|
nwDecIVFwdIfCtrOutBytes Counter,
|
|
nwDecIVFwdIfCtrFwdBytes Counter,
|
|
nwDecIVFwdIfCtrFilteredBytes Counter,
|
|
nwDecIVFwdIfCtrDiscardBytes Counter,
|
|
nwDecIVFwdIfCtrHostInPkts Counter,
|
|
nwDecIVFwdIfCtrHostOutPkts Counter,
|
|
nwDecIVFwdIfCtrHostDiscardPkts Counter,
|
|
nwDecIVFwdIfCtrHostInBytes Counter,
|
|
nwDecIVFwdIfCtrHostOutBytes Counter,
|
|
nwDecIVFwdIfCtrHostDiscardBytes Counter
|
|
}
|
|
|
|
nwDecIVFwdIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 1 }
|
|
|
|
nwDecIVFwdIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port DECnet packet and
|
|
byte counters on the router port for which the entry exists. Enabled
|
|
(3) causes these counters to become active. Disabled (2) causes
|
|
these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVFwdIfCtrEntry 2 }
|
|
|
|
nwDecIVFwdIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port DECnet packet and byte counters on the router
|
|
port for which the entry exists. Reset (2) resets the counters to 0.
|
|
nwDecIVFwdIfCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwDecIVFwdIfCtrEntry 3 }
|
|
|
|
nwDecIVFwdIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that the
|
|
per-port DECnet packet and byte counters have been active on the
|
|
router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 4 }
|
|
|
|
nwDecIVFwdIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
received, during nwDecIVFwdIfCtrOperationaltime, on the router port
|
|
for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 5 }
|
|
|
|
nwDecIVFwdIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
transmitted, during nwDecIVFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 6 }
|
|
|
|
nwDecIVFwdIfCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
forwarded on the router port for which the entry exists, during
|
|
nwDecIVFwdCtrOperationalTime."
|
|
::= { nwDecIVFwdIfCtrEntry 7 }
|
|
|
|
nwDecIVFwdIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
administratively filtered, during nwDecIVFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 8 }
|
|
|
|
nwDecIVFwdIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded (dropped), during nwDecIVFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 9 }
|
|
|
|
nwDecIVFwdIfCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded because of addressing errors in the DECnet header,
|
|
during nwDecIVFwdIfCtrOperationalTime, on the router port for
|
|
which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 10 }
|
|
|
|
nwDecIVFwdIfCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded because an invalid packet length was contained in the
|
|
DECnet header, during nwDecIVFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 11 }
|
|
|
|
nwDecIVFwdIfCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded because of an invalid DECnet header, during
|
|
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 12 }
|
|
|
|
nwDecIVFwdIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been received, during nwDecIVFwdIfCtrOperationalTime, on the
|
|
router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 13 }
|
|
|
|
nwDecIVFwdIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that have
|
|
been transmitted, during nwDecIVFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 14 }
|
|
|
|
nwDecIVFwdIfCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been forwarded, during nwDecIVFwdIfCtrOperationalTime, on the
|
|
router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 15 }
|
|
|
|
nwDecIVFwdIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been administratively filtered, during
|
|
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 16 }
|
|
|
|
nwDecIVFwdIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been discarded, during nwDecIVFwdIfCtrOperationalTime, on the
|
|
router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 17 }
|
|
|
|
nwDecIVFwdIfCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
delivered to the local host, during nwDecIVFwdIfCtrOperationalTime,
|
|
that were received on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 18 }
|
|
|
|
nwDecIVFwdIfCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
transmitted by the local host, during nwDecIVFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 19 }
|
|
|
|
nwDecIVFwdIfCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet packets that have been
|
|
discarded by the local host, during nwDecIVFwdIfCtrOperationalTime,
|
|
that were received on the router port for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 20 }
|
|
|
|
nwDecIVFwdIfCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been delivered to the local host, during
|
|
nwDecIVFwdIfCtrOperationalTime, that were received on the router port
|
|
for which the entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 21 }
|
|
|
|
nwDecIVFwdIfCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been transmitted by the local host, during
|
|
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVFwdIfCtrEntry 22 }
|
|
|
|
nwDecIVFwdIfCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that
|
|
have been discarded by the local host, due to a lack of host
|
|
resources, that were received on the router port for which the entry
|
|
exists, during nwDecIVFwdIfCtrOperationalTime."
|
|
::= { nwDecIVFwdIfCtrEntry 23 }
|
|
|
|
|
|
-- DistanceVector-based Protocols
|
|
-- This group contains the managed objects for DEC IV Routing Protocol, DEC IV
|
|
-- DistanceVector based routing.
|
|
|
|
-- DEC IV Proto System Configuration Parameters
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the DEC IV Proto DistanceVector based routing protocol.
|
|
|
|
|
|
nwDecIVProtoAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the DECnet Phase IV
|
|
distance-vector-based routing protocol system-wide. Enabled (3)
|
|
causes the routing protocol to become active on all router ports
|
|
configured and enabled for DECnet Routing Services. Disabled (2)
|
|
causes the routing protocol to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoConfig 1 }
|
|
|
|
nwDecIVProtoOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running-invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the DECnet Phase
|
|
IV distance-vector-based routing protocol system-wide. The value
|
|
of nwDecIVProtoOperStatus indicates any problem with the DECnet
|
|
Phase IV distance-vector-based routing protocol configuration.
|
|
A value of 6 indicates that regardless of the value of
|
|
nwDecIVProtoAdminStatus, the DECnet Phase IV distance-vector-based
|
|
routing protocol is not operating because of an invalid configuration."
|
|
::= { nwDecIVProtoConfig 2 }
|
|
|
|
nwDecIVProtoAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the DECnet Phase IV distance-vector-based routing
|
|
protocol. Reset (2) forces a system-wide restart of the protocol
|
|
without a graceful shut-down on any active router ports."
|
|
DEFVAL { other }
|
|
::= { nwDecIVProtoConfig 3 }
|
|
|
|
nwDecIVProtoOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVProtoOperStatus has been in current state."
|
|
::= { nwDecIVProtoConfig 4 }
|
|
|
|
nwDecIVProtoVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the DECnet Phase IV
|
|
distance-vector-based routing protocol firmware, in textual format."
|
|
::= { nwDecIVProtoConfig 5 }
|
|
|
|
nwDecIVProtoStackSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the stack size of the DECnet Phase IV distance-vector-
|
|
based routing protocol thread. In order for a change of this value
|
|
to take effect, the protocol (nwDecIVProtoAdminReset), DECnet
|
|
Phase IV Routing Services (nwDecIVSysAdminReset), or the device
|
|
running Routing Services must be reset."
|
|
DEFVAL { 4096 }
|
|
::= { nwDecIVProtoConfig 6 }
|
|
|
|
nwDecIVProtoThreadPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time execution priority of the DECnet Phase IV
|
|
distance-vector-based routing protocol thread. In order for a change
|
|
of this value to take effect, the protocol (nwDecIVProtoAdminReset),
|
|
DECnet Phase IV Routing Services (nwDecIVSysAdminReset), or the
|
|
device running Routing Services must be reset."
|
|
DEFVAL { 127 }
|
|
::= { nwDecIVProtoConfig 7 }
|
|
|
|
nwDecIVProtoDatabaseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { 2000 }
|
|
::= { nwDecIVProtoConfig 8 }
|
|
|
|
nwDecIVProtoAgeOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect."
|
|
DEFVAL { 180 }
|
|
::= { nwDecIVProtoConfig 9 }
|
|
|
|
nwDecIVProtoHoldDown OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific
|
|
MIBs. Setting this object has no effect. "
|
|
DEFVAL { 120 }
|
|
::= { nwDecIVProtoConfig 10 }
|
|
|
|
|
|
-- DEC IV Routing Protocol System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) DEC IV Routing Protocol
|
|
-- packet and byte counters.
|
|
nwDecIVProtoCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- counters off
|
|
enabled(3) -- counters on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (system-wide) DECnet
|
|
Phase IV distance-vector-based routing protocol packet and byte
|
|
counters. Enabled (3) causes these counters to become active.
|
|
Disabled (2) causes these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoCounters 1 }
|
|
|
|
nwDecIVProtoCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) DECnet Phase IV
|
|
distance-vector-based routing protocol packet and byte counters.
|
|
Reset (2) resets the DECnet aggregate counters to 0.
|
|
nwDecIVProtoCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwDecIVProtoCounters 2 }
|
|
|
|
nwDecIVProtoCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVProtoCtrAdminStatus has been in it's current state."
|
|
::= { nwDecIVProtoCounters 3 }
|
|
|
|
nwDecIVProtoCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been received, system-wide,
|
|
during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 4 }
|
|
|
|
nwDecIVProtoCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been transmitted, system-wide,
|
|
during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 5 }
|
|
|
|
nwDecIVProtoCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been administratively filtered,
|
|
system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 6 }
|
|
|
|
nwDecIVProtoCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of the DECnet Phase IV distance-vector
|
|
-based routing protocol packets that have been discarded,
|
|
system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 7 }
|
|
|
|
nwDecIVProtoCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vector based routing protocol packets that have been
|
|
received, system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 8 }
|
|
|
|
nwDecIVProtoCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vectorbased routing protocol packets that have been
|
|
transmitted, system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 9 }
|
|
|
|
nwDecIVProtoCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vectorbased routing protocol packets that have been
|
|
administratively filtered, system-wide, during
|
|
nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 10 }
|
|
|
|
nwDecIVProtoCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vectorbased routing protocol packets that have been
|
|
discarded system-wide, during nwDecIVProtoCtrOperationalTime."
|
|
::= { nwDecIVProtoCounters 11 }
|
|
|
|
|
|
-- DecIV Protocol Interface Table
|
|
nwDecIVProtoIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVProtoIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. Each entry can
|
|
contain different values, allowing the routing protocol configuration
|
|
to vary from router port to router port. This table is indexed by
|
|
nwDecIVProtoIfIndex, which indicates the value of MIB 2 ifIndex,
|
|
which identifies the router port for which each entry exists."
|
|
::= { nwDecIVProtoIfConfig 1 }
|
|
|
|
nwDecIVProtoIfEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVProtoIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the DECnet Phase IV distance-vector-based
|
|
routing protocol configuration for the router port for which the
|
|
entry exists."
|
|
INDEX { nwDecIVProtoIfIndex }
|
|
::= { nwDecIVProtoIfTable 1 }
|
|
|
|
NwDecIVProtoIfEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVProtoIfIndex INTEGER,
|
|
nwDecIVProtoIfAdminStatus INTEGER,
|
|
nwDecIVProtoIfOperStatus INTEGER,
|
|
nwDecIVProtoIfOperationalTime TimeTicks,
|
|
nwDecIVProtoIfVersion INTEGER,
|
|
nwDecIVProtoIfAdvertisement INTEGER,
|
|
nwDecIVProtoIfFloodDelay INTEGER,
|
|
nwDecIVProtoIfRequestDelay INTEGER,
|
|
nwDecIVProtoIfPriority INTEGER,
|
|
nwDecIVProtoIfHelloTimer INTEGER,
|
|
nwDecIVProtoIfSplitHorizon INTEGER,
|
|
nwDecIVProtoIfPoisonReverse INTEGER,
|
|
nwDecIVProtoIfSnooping INTEGER,
|
|
nwDecIVProtoIfType INTEGER,
|
|
nwDecIVProtoIfXmitCost INTEGER,
|
|
nwDecIVProtoIfAclIdentifier INTEGER,
|
|
nwDecIVProtoIfAclStatus INTEGER
|
|
}
|
|
|
|
nwDecIVProtoIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVProtoIfEntry 1 }
|
|
|
|
nwDecIVProtoIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the DECnet Phase IV
|
|
distance-vector-based routing protocol on the router port for which
|
|
the entry exists. Enabled (3) causes the routing protocol to become
|
|
active on the router port. Disabled (2) causes it to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoIfEntry 2 }
|
|
|
|
nwDecIVProtoIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the DECnet Phase IV
|
|
distance-vector-based routing protocol on the router port for which
|
|
the entry exists. The value of nwDecIVProtoIfOperStatus indicates
|
|
any problem with your routing protocol configuration on the router
|
|
port. A value of 6 indicates that regardless of the value of
|
|
nwDecIVProtoIfAdminStatus, the routing protocol is not operating
|
|
because of an invalid configuration."
|
|
::= { nwDecIVProtoIfEntry 3 }
|
|
|
|
nwDecIVProtoIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVProtoIfOperStatus has been in it`s current state."
|
|
::= { nwDecIVProtoIfEntry 4 }
|
|
|
|
nwDecIVProtoIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the revision level of the DECnet Phase IV
|
|
distance-vector-based routing protocol firmware on the router port
|
|
for which the entry exists, in textual format."
|
|
DEFVAL { 3 }
|
|
::= { nwDecIVProtoIfEntry 5 }
|
|
|
|
nwDecIVProtoIfAdvertisement OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the interval, in seconds, at which the DECnet Phase IV
|
|
distance-vectorbased routing protocol advertises its route table on
|
|
the router port for which the entry exists. Change this value to
|
|
cause the DECnet Phase IV distance-vector-based routing protocol to
|
|
advertise its route table more or less frequently on the router port."
|
|
DEFVAL { 40 }
|
|
::= { nwDecIVProtoIfEntry 6 }
|
|
|
|
nwDecIVProtoIfFloodDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { 2 }
|
|
::= { nwDecIVProtoIfEntry 7 }
|
|
|
|
nwDecIVProtoIfRequestDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { 0 }
|
|
::= { nwDecIVProtoIfEntry 8 }
|
|
|
|
nwDecIVProtoIfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the priority of the DECnet Phase IV distance-vector-based
|
|
routing protocol on the router port for which the entry exists.
|
|
Within an area, the router with the highest value for
|
|
nwDecIVProtoIfPriority becomes the priority or designated router.
|
|
The highest possible value for nwDecIVProtocolIfPriority is 127. Set
|
|
this value high to cause your DECnet Phase IV Routing Services-enabled
|
|
device to become the designated router. Set this value low to guarantee
|
|
that it does not become the designated router."
|
|
DEFVAL { 64 }
|
|
::= { nwDecIVProtoIfEntry 9 }
|
|
|
|
nwDecIVProtoIfHelloTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the interval, in seconds, at which DECnet Phase IV
|
|
distance-vector-based routing protocol sends Hello packets on the
|
|
router port for which the entry exists."
|
|
DEFVAL { 15 }
|
|
::= { nwDecIVProtoIfEntry 10 }
|
|
|
|
nwDecIVProtoIfSplitHorizon OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- Split Horizon off
|
|
enabled(3) -- Split Horizon on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoIfEntry 11 }
|
|
|
|
nwDecIVProtoIfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common object
|
|
inherited from the MIB framework used to provide a common management
|
|
interface to all the Cabletron Routing Services protocol-specific MIBs.
|
|
Setting this object has no effect."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVProtoIfEntry 12 }
|
|
|
|
nwDecIVProtoIfSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- Snooping off
|
|
enabled(3) -- Snooping on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of DECnet Phase IV distance-vector-based
|
|
routing protocol snooping on the router port. When snooping is
|
|
enabled the DECnet Phase IV distance-vector-based routing protocol
|
|
operates in passive mode, so that it receives route information,
|
|
builds and maintains a route table, but does not advertise the route
|
|
table or send updates on the router port for which the entry exists."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVProtoIfEntry 13 }
|
|
|
|
nwDecIVProtoIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
bma(2), -- broadcast media access
|
|
nbma(3) -- non-broadcast media access
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the directly connected network segment does or
|
|
does not support broadcast media access."
|
|
DEFVAL { bma }
|
|
::= { nwDecIVProtoIfEntry 14 }
|
|
|
|
nwDecIVProtoIfXmitCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the cost of transmitting a packet on the network segment
|
|
connected to the router port for which the entry exists. The DECnet
|
|
Phase IV distance-vector-based routing protocol picks the route with
|
|
the least total nwDecIVProtoIfXmitCost as the best route. If
|
|
nwDecIVProtocolIfXmitCost, also known as path cost, is the same for
|
|
all possible routes , the best route chosen is the route with the
|
|
least number of hops is chosen as the best route."
|
|
DEFVAL { 1 }
|
|
::= { nwDecIVProtoIfEntry 15 }
|
|
|
|
nwDecIVProtoIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the access control list in
|
|
effect for DECnet Phase IV distance-vector-based routing protocol
|
|
packets on the router port for which the entry exists. A value of 0
|
|
indicates that there is no access control list in effect for DECnet
|
|
Phase IV distance-vector-based routing protocol packets on the router
|
|
port."
|
|
DEFVAL { 0 }
|
|
::= { nwDecIVProtoIfEntry 16 }
|
|
|
|
nwDecIVProtoIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- do not apply nwDecIVProtoIfAcl
|
|
enabled(3) -- apply nwDecIVProtoIfAcl
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the access control list identified by
|
|
nwDecIVProtoIfAclIdentifier. Enabled (3) applies the access control
|
|
list to all DECnet Phase IV distance-vector-based routing protocol
|
|
packet traffic on the router port for which the entry exists. Disabled
|
|
(2) prevents the access control list from being applied."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVProtoIfEntry 17 }
|
|
|
|
|
|
-- Dec IV Protocol Interface Counters Table
|
|
-- This table contains the managed objects for DEC IV protocols packet and
|
|
-- byte counter on a per router port basis.
|
|
nwDecIVProtoIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVProtoIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. This table is
|
|
indexed by nwDecIVProtoIfCtrIfIndex which indicates the value of
|
|
MIB2 ifindex, which identifies the router port for which the entry
|
|
exists."
|
|
::= { nwDecIVProtoIfCounters 1 }
|
|
|
|
nwDecIVProtoIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVProtoIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count of DECnet
|
|
Phase IV distance-vector-based routing protocol packets on the router
|
|
port for which the entry exists."
|
|
INDEX { nwDecIVProtoIfCtrIfIndex }
|
|
::= { nwDecIVProtoIfCtrTable 1 }
|
|
|
|
NwDecIVProtoIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVProtoIfCtrIfIndex INTEGER,
|
|
nwDecIVProtoIfCtrAdminStatus INTEGER,
|
|
nwDecIVProtoIfCtrReset INTEGER,
|
|
nwDecIVProtoIfCtrOperationalTime TimeTicks,
|
|
nwDecIVProtoIfCtrInPkts Counter,
|
|
nwDecIVProtoIfCtrOutPkts Counter,
|
|
nwDecIVProtoIfCtrFilteredPkts Counter,
|
|
nwDecIVProtoIfCtrDiscardPkts Counter,
|
|
nwDecIVProtoIfCtrInBytes Counter,
|
|
nwDecIVProtoIfCtrOutBytes Counter,
|
|
nwDecIVProtoIfCtrFilteredBytes Counter,
|
|
nwDecIVProtoIfCtrDiscardBytes Counter
|
|
}
|
|
nwDecIVProtoIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 1 }
|
|
|
|
nwDecIVProtoIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port DECnet Phase IV
|
|
distance-vectorbased routing protocol packet and byte counters on
|
|
the router port for which the entry exists. Enabled (3) causes these
|
|
counters to become active. Disabled (2) causes these counters to
|
|
become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVProtoIfCtrEntry 2 }
|
|
|
|
nwDecIVProtoIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port DECnet Phase IV distance-vector-based routing
|
|
protocol packet and byte counters on the router port for which the
|
|
entry exists. Reset (2) resets the counters to 0.
|
|
nwDecIVProtoIfCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwDecIVProtoIfCtrEntry 3 }
|
|
|
|
nwDecIVProtoIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwDecIVProtoIfCtrAdminStatus has been in the current state."
|
|
::= { nwDecIVProtoIfCtrEntry 4 }
|
|
|
|
nwDecIVProtoIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been received, during
|
|
nwDecIVProtoIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 5 }
|
|
|
|
nwDecIVProtoIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been transmitted, during
|
|
nwDecIVProtoIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 6 }
|
|
|
|
nwDecIVProtoIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been administratively filtered,
|
|
during nwDecIVProtoIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 7 }
|
|
|
|
nwDecIVProtoIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of DECnet Phase IV distance-vector-based
|
|
routing protocol packets that have been discarded, during
|
|
nwDecIVProtoIfCtrOperationalTime, that were received on the router
|
|
port for which the entry exist."
|
|
::= { nwDecIVProtoIfCtrEntry 8 }
|
|
nwDecIVProtoIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vector-based routing protocol packets that have been
|
|
received, during nwDecIVProtoIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 9 }
|
|
|
|
nwDecIVProtoIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vector-based routing protocol packets that have been
|
|
transmitted, during nwDecIVProtoIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 10 }
|
|
nwDecIVProtoIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet Phase IV
|
|
distance-vector-based routing protocol packets that have been
|
|
administratively filtered, during nwDecIVProtoIfCtrOperationalTime,
|
|
that were received on the router port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 11 }
|
|
|
|
nwDecIVProtoIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the DECnet packets that have
|
|
been discarded, during nwDecIVProtoIfCtrOperationalTime, that were
|
|
received on the router port for which the entry exists."
|
|
::= { nwDecIVProtoIfCtrEntry 12 }
|
|
|
|
|
|
-- DECnet Phase IV Forward Information Base (FIB) Table
|
|
-- This table contains the managed objects for the forwarding table of the
|
|
-- DECnet Phase IV router. This table is built from entries in the DECnet
|
|
-- Phase IV routing table(s) and reflects the routes that are considered
|
|
-- the best routes to forward on.
|
|
nwDecIVFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVFibEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each route being used to forward
|
|
DECnet data packets.."
|
|
::= { nwDecIVFib 1 }
|
|
|
|
nwDecIVFibEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVFibEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry in the table describes a route to a particular DECnet
|
|
destination network and node."
|
|
INDEX { nwDecIVFibNodeId }
|
|
::= { nwDecIVFibTable 1 }
|
|
|
|
NwDecIVFibEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVFibNodeId DecIVAddress,
|
|
nwDecIVFibNextHopNodeId DecIVAddress,
|
|
nwDecIVFibNextHopIf INTEGER,
|
|
nwDecIVFibRouteType INTEGER
|
|
}
|
|
|
|
nwDecIVFibNodeId OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the DECnet Address of the destination node of the route
|
|
for which the entry exists."
|
|
::= { nwDecIVFibEntry 1 }
|
|
|
|
nwDecIVFibNextHopNodeId OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the DECnet Address of the next hop router for the route
|
|
for which the entry exists."
|
|
::= { nwDecIVFibEntry 2 }
|
|
|
|
nwDecIVFibNextHopIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port through which the route exists."
|
|
DEFVAL { 0 }
|
|
::= { nwDecIVFibEntry 3 }
|
|
|
|
nwDecIVFibRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
invalid(2), -- not a valid route
|
|
direct(3), -- destination is on a direct conn. seg.
|
|
remote(4) -- destination is avail. through the next hop router.
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the status of the route. A value of 3 indicates that the
|
|
destination is on the network segment that is directly connected to
|
|
the router port identified by nwDecIVFibNextHopIf. A value of 4
|
|
indicates that the destination is on an indirectly connected network
|
|
segment, which is reachable through the next hop router indicated by
|
|
the value of nwDecIVFibNextHopNodeId. A value of 2 indicates that the
|
|
route is invalid."
|
|
DEFVAL { direct }
|
|
::= { nwDecIVFibEntry 4 }
|
|
|
|
|
|
-- DECnet Phase IV Access Control List Table
|
|
-- This table contains the managed objects for the Access Control Lists
|
|
-- within the DECnet Phase IV Router. Access Control Lists allow configuration of
|
|
-- restricted access to networks and protocols reachable thru the DecIV
|
|
-- Router device. Access Control Lists can be defined with these
|
|
nwDecIVAclValidEntries OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of valid entries that exist in the access
|
|
control list table, nwDecIVAclTable."
|
|
::= { nwDecIVAccessControl 1 }
|
|
|
|
nwDecIVAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the access control list information for DECnet
|
|
traffic. This table contains entries each of which specifies whether
|
|
packet forwarding between a particular source destination pair is
|
|
permitted or denied. Each entry is part of a particular access
|
|
control list. Each list is identified by a unique Access Control ID.
|
|
Each list may contain multiple entries ordered by sequence number.
|
|
When an Access Control List is searched, it is searched in sequence
|
|
number order and the first match found ends the search. If no match
|
|
is found, access defaults to permitted."
|
|
::= { nwDecIVAccessControl 2 }
|
|
|
|
nwDecIVAclEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains DECnet source/destination access information."
|
|
INDEX { nwDecIVAclIdentifier, nwDecIVAclSequence }
|
|
::= { nwDecIVAclTable 1 }
|
|
|
|
NwDecIVAclEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVAclIdentifier INTEGER,
|
|
nwDecIVAclSequence INTEGER,
|
|
nwDecIVAclPermission INTEGER,
|
|
nwDecIVAclMatches Counter,
|
|
nwDecIVAclDestAddress DecIVAddress,
|
|
nwDecIVAclSrcAddress DecIVAddress
|
|
|
|
}
|
|
|
|
nwDecIVAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the DECnet access control
|
|
list table. This value identifies each access control list by a
|
|
unique identifier, a number arbitrarily assigned by the user. All
|
|
entries that have the same value for nwDecIVAclIdentifier belong to
|
|
the same access control list."
|
|
::= { nwDecIVAclEntry 1 }
|
|
|
|
nwDecIVAclSequence OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the secondary (minor) index into the DECnet access control
|
|
list table. This number corresponds to a sequence number used to
|
|
order multiple entries within the same access control list."
|
|
::= { nwDecIVAclEntry 2 }
|
|
|
|
nwDecIVAclPermission OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permit(3),
|
|
deny(4),
|
|
permit-bidirectional(5),
|
|
deny-bidirectional(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether access is allowed or denied between the source
|
|
and destination address pair. Note that source and destination are
|
|
interchangeable when bi-directional control is selected. To remove
|
|
an existing entry set nwDecIVAclPermission to invalid (2). Invalid
|
|
entries disappear after reboot."
|
|
DEFVAL { permit }
|
|
::= { nwDecIVAclEntry 3 }
|
|
|
|
nwDecIVAclMatches OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of matches on this entry that have resulted
|
|
in the permit/deny access restriction being applied as part of the
|
|
forwarding process."
|
|
::= { nwDecIVAclEntry 4 }
|
|
|
|
nwDecIVAclDestAddress OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the destination DECnet Address used to compare for
|
|
matches on the access control list. Either the Area ID or Node ID
|
|
of this address may be set to 0, a wildcard value which matches all
|
|
areas or all nodes."
|
|
::= { nwDecIVAclEntry 5 }
|
|
|
|
nwDecIVAclSrcAddress OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the source DECnet Address used to compare for matches on
|
|
the access control list. Either the Area ID or Node ID of this
|
|
address may be set to a wildcard value which matches all areas or
|
|
all nodes."
|
|
::= { nwDecIVAclEntry 6 }
|
|
|
|
--
|
|
-- DecIV Hosts-to-Media Table
|
|
|
|
-- This table provides a mapping between DecIV Network Protocol
|
|
-- addresses and their corresponding circuit identifiers (if
|
|
-- applicable), port numbers, and framing.
|
|
|
|
|
|
nwDecIVHostMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DecIV Address translation table used for mapping
|
|
a DecIV address to a circuit identifier (if applicable),
|
|
corresponding port number, and framing type."
|
|
::= { nwDecIVHostsToMedia 1 }
|
|
|
|
nwDecIVHostMapEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains one DecIVAddress to circuit
|
|
equivalence. Also provided is the framing required to
|
|
converse with this host, and the corresponding logical
|
|
port number."
|
|
INDEX { nwDecIVHostMapIfIndex, nwDecIVHostMapDecIVAddr }
|
|
::= { nwDecIVHostMapTable 1 }
|
|
|
|
NwDecIVHostMapEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVHostMapIfIndex INTEGER,
|
|
nwDecIVHostMapDecIVAddr DecIVAddress,
|
|
nwDecIVHostMapType INTEGER,
|
|
nwDecIVHostMapCircuitID INTEGER,
|
|
nwDecIVHostMapFraming INTEGER,
|
|
nwDecIVHostMapPortNumber INTEGER
|
|
}
|
|
|
|
nwDecIVHostMapIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the DecIV HostMap
|
|
table. This number corresponds to the index into the MIB-2
|
|
Interfaces Group which describes the DecIV router port for which
|
|
the entry exists."
|
|
::= { nwDecIVHostMapEntry 1 }
|
|
|
|
nwDecIVHostMapDecIVAddr OBJECT-TYPE
|
|
SYNTAX DecIVAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DecIVAddress of the host on the corresponding interface
|
|
and circuit (if applicable)."
|
|
::= { nwDecIVHostMapEntry 2 }
|
|
|
|
nwDecIVHostMapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
dynamic(3),
|
|
static(4),
|
|
inactive(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to the value invalid(2) has
|
|
the effect of invalidating the corresponding entry in the
|
|
nwDecIVHostMapTable. That is, it effectively dissasociates
|
|
the circuitand/or interface identified with said entry from the
|
|
mapping identified with said entry. It is an implementation-
|
|
specific matter as to whether the agent removes an invalidated
|
|
entry from the table. Accordingly, management stations must be
|
|
prepared to receive tabular information from agents that
|
|
corresponds to entries not currently in use. Proper inter-
|
|
pretation of such entries requires examination of the relevant
|
|
wDecIVHostMapType object."
|
|
|
|
::= { nwDecIVHostMapEntry 3 }
|
|
|
|
nwDecIVHostMapCircuitID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The identifier for the virtual circuit present on the
|
|
interface. On an interface configured for Frame Relay,
|
|
this number is the DLCI for the DecIV Address at the end of
|
|
the circuit. For non-WAN interfaces, the value of this
|
|
object is zero."
|
|
::= { nwDecIVHostMapEntry 4 }
|
|
|
|
nwDecIVHostMapFraming OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- ethernet, fddi, and token ring
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encaptrsnap(14), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special media, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type required to converse with the
|
|
host for which this entry exists."
|
|
::= { nwDecIVHostMapEntry 5 }
|
|
|
|
nwDecIVHostMapPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value for the logical port number. It's value
|
|
ranges between 1 and a maximum value which is dependent on both
|
|
the number of configured interfaces in the system and the number
|
|
of circuits present on those interfaces which are of WAN type."
|
|
::= { nwDecIVHostMapEntry 6 }
|
|
|
|
|
|
-- DECnet Event Group
|
|
|
|
nwDecIVEventAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1) ,
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of DECnet event logging. Enabled (3)
|
|
causes the event log to become active. Disabled (2) causes the event
|
|
log to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwDecIVEventLogConfig 1 }
|
|
|
|
nwDecIVEventMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the maximum number of entries allowed in the event log table.
|
|
When the number of entries reaches the value of nwDecIVEventMaxEntries,
|
|
the first (oldest) entry is deleted to allow a new entry to be added."
|
|
DEFVAL { 100 }
|
|
::= { nwDecIVEventLogConfig 2 }
|
|
|
|
nwDecIVEventTraceAll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabled (3) allows logging of all event types on all router ports
|
|
for all protocols and components. Disabled (2) causes the filter
|
|
table to specify which events to log."
|
|
DEFVAL { enabled }
|
|
::= { nwDecIVEventLogConfig 3 }
|
|
|
|
|
|
-- Event Log Filter Table
|
|
-- The Event Log Filter Table contains the managed objects used to set-up
|
|
-- and configure log entries.
|
|
|
|
nwDecIVEventFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains and entry for each event filter configured for
|
|
DECnet Phase IV Routing Services events."
|
|
::= { nwDecIVEventLogFilterTable 1 }
|
|
|
|
nwDecIVEventFilterEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry describes an event filter which defines a particular type
|
|
of event to be logged to the event log. The value of
|
|
nwDecIVEventFltrProtocol indicates the value used either in the
|
|
nwRtgProtocolTable or the nwComponentTable in the Cabletron Routing
|
|
Services MIB, which identifies the protocol or component to which the
|
|
entry applies."
|
|
INDEX { nwDecIVEventFltrProtocol, nwDecIVEventFltrIfNum }
|
|
::= { nwDecIVEventFilterTable 1 }
|
|
|
|
NwDecIVEventFilterEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVEventFltrProtocol INTEGER,
|
|
nwDecIVEventFltrIfNum INTEGER,
|
|
nwDecIVEventFltrControl INTEGER,
|
|
nwDecIVEventFltrType INTEGER,
|
|
nwDecIVEventFltrSeverity INTEGER,
|
|
nwDecIVEventFltrAction INTEGER
|
|
}
|
|
|
|
nwDecIVEventFltrProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the Cabletron Routing Services MIB
|
|
nwRtgProtocolInstance or nwComponentRtgInstance which identifies the
|
|
protocol involved in the event for which the event filter exists."
|
|
::= { nwDecIVEventFilterEntry 1 }
|
|
|
|
nwDecIVEventFltrIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the router port involved in the event for which the event
|
|
filter exists."
|
|
::= { nwDecIVEventFilterEntry 2 }
|
|
|
|
nwDecIVEventFltrControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2),
|
|
add(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this value to 3 to add the entry to the event filter table. Set
|
|
this value to 2 to remove the entry from the event filter table."
|
|
DEFVAL { add }
|
|
::= { nwDecIVEventFilterEntry 3 }
|
|
|
|
nwDecIVEventFltrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
diags(32),
|
|
error(64)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This 6 bit mask specifies the types of events to be logged. By
|
|
default all 6 bits are set to 1, indicating that all types of events
|
|
are to be logged. Setting any bit to 0 removes an event type from
|
|
this field and prevents that type of event from being logged. Setting
|
|
any bit to 1 adds an event type to this field and enables that type
|
|
of event to be logged."
|
|
::= { nwDecIVEventFilterEntry 4 }
|
|
|
|
nwDecIVEventFltrSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the level of severity an event must meet in order to be
|
|
logged. Controls the amount of event logging by ignoring events of a
|
|
lower priority than specified by this filter value. `Highmed' ignores
|
|
only events of the lowest severity. `Highlow' logs all events highest
|
|
priority through lowest. `Highest' severity causes all events except
|
|
those of the highest severity to be ignored. `Highmed' severity is the
|
|
default setting which causes only events of the lowest severity to be
|
|
ignored. `Highlow' severity logs all events, regardless of severity."
|
|
DEFVAL { highest }
|
|
::= { nwDecIVEventFilterEntry 5 }
|
|
|
|
nwDecIVEventFltrAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
log(1),
|
|
trap(2),
|
|
log-trap(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies how the events are to be logged. Logging to the `log'
|
|
stores the events in the event log table (nwDecIVEventLogTable).
|
|
Logging to'trap' sends events out through the trap mechanism."
|
|
DEFVAL { log }
|
|
::= { nwDecIVEventFilterEntry 6 }
|
|
|
|
-- Event Log Table
|
|
-- The Event Log Table contains the logged events.
|
|
|
|
nwDecIVEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwDecIVEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each event that has been
|
|
logged."
|
|
::= { nwDecIVEventLogTable 1 }
|
|
|
|
nwDecIVEventEntry OBJECT-TYPE
|
|
SYNTAX NwDecIVEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the information about an event that has
|
|
been logged to the event table."
|
|
INDEX { nwDecIVEventNumber }
|
|
::= { nwDecIVEventTable 1 }
|
|
|
|
NwDecIVEventEntry ::=
|
|
SEQUENCE {
|
|
nwDecIVEventNumber INTEGER,
|
|
nwDecIVEventTime TimeTicks,
|
|
nwDecIVEventType INTEGER,
|
|
nwDecIVEventSeverity INTEGER,
|
|
nwDecIVEventProtocol INTEGER,
|
|
nwDecIVEventIfNum INTEGER,
|
|
nwDecIVEventTextString OCTET STRING
|
|
}
|
|
|
|
nwDecIVEventNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An ordinal value assigned to the event for which the log entry
|
|
exists. nwDecIVEventNumber is assigned so that each event in the
|
|
event log can be uniquely identified by the value of
|
|
nwDecIVEventNumber."
|
|
::= { nwDecIVEventEntry 1 }
|
|
|
|
nwDecIVEventTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the time at which the event was logged to the event
|
|
log."
|
|
::= { nwDecIVEventEntry 2 }
|
|
|
|
nwDecIVEventType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
error(32)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the type of event that was logged."
|
|
::= { nwDecIVEventEntry 3 }
|
|
|
|
nwDecIVEventSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the severity that was assigned to the event."
|
|
::= { nwDecIVEventEntry 4 }
|
|
|
|
nwDecIVEventProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the Cabletron Routing Services MIB
|
|
nwRtgProtocolInstance or nwComponentInstance which identifies the
|
|
protocol or component that was involved in the event."
|
|
::= { nwDecIVEventEntry 5 }
|
|
|
|
nwDecIVEventIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the router port that was involved in the event."
|
|
::= { nwDecIVEventEntry 6 }
|
|
|
|
nwDecIVEventTextString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the actual text string that was logged."
|
|
::= { nwDecIVEventEntry 7 }
|
|
|
|
END
|