Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
443 lines
16 KiB
Text
443 lines
16 KiB
Text
OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
|
|
ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
|
|
ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
|
|
ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
|
|
ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
|
|
ospfExtLsdbLimit, ospf
|
|
FROM OSPF-MIB;
|
|
|
|
ospfTrap MODULE-IDENTITY
|
|
LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
|
|
ORGANIZATION "IETF OSPF Working Group"
|
|
CONTACT-INFO
|
|
" Fred Baker
|
|
Postal: Cisco Systems
|
|
519 Lado Drive
|
|
Santa Barbara, California 93111
|
|
Tel: +1 805 681 0115
|
|
E-Mail: fred@cisco.com
|
|
|
|
Rob Coltun
|
|
Postal: RainbowBridge Communications
|
|
Tel: (301) 340-9416
|
|
E-Mail: rcoltun@rainbow-bridge.com"
|
|
DESCRIPTION
|
|
"The MIB module to describe traps for the OSPF
|
|
Version 2 Protocol."
|
|
::= { ospf 16 }
|
|
|
|
-- Trap Support Objects
|
|
|
|
-- The following are support objects for the OSPF traps.
|
|
|
|
ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
|
|
ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
|
|
|
|
ospfSetTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A four-octet string serving as a bit map for
|
|
the trap events defined by the OSPF traps. This
|
|
object is used to enable and disable specific
|
|
OSPF traps where a 1 in the bit field
|
|
represents enabled. The right-most bit (least
|
|
significant) represents trap 0."
|
|
::= { ospfTrapControl 1 }
|
|
|
|
|
|
ospfConfigErrorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
badVersion (1),
|
|
areaMismatch (2),
|
|
unknownNbmaNbr (3), -- Router is Dr eligible
|
|
unknownVirtualNbr (4),
|
|
authTypeMismatch(5),
|
|
authFailure (6),
|
|
netMaskMismatch (7),
|
|
helloIntervalMismatch (8),
|
|
deadIntervalMismatch (9),
|
|
optionMismatch (10) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Potential types of configuration conflicts.
|
|
Used by the ospfConfigError and ospfConfigVir-
|
|
tError traps."
|
|
::= { ospfTrapControl 2 }
|
|
|
|
|
|
ospfPacketType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hello (1),
|
|
dbDescript (2),
|
|
lsReq (3),
|
|
lsUpdate (4),
|
|
lsAck (5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF packet types."
|
|
::= { ospfTrapControl 3 }
|
|
|
|
|
|
ospfPacketSrc OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of an inbound packet that can-
|
|
not be identified by a neighbor instance."
|
|
::= { ospfTrapControl 4 }
|
|
|
|
|
|
-- Traps
|
|
|
|
|
|
ospfIfStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfIfState -- The new state
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfStateChange trap signifies that there
|
|
has been a change in the state of a non-virtual
|
|
OSPF interface. This trap should be generated
|
|
when the interface state regresses (e.g., goes
|
|
from Dr to Down) or progresses to a terminal
|
|
state (i.e., Point-to-Point, DR Other, Dr, or
|
|
Backup)."
|
|
::= { ospfTraps 16 }
|
|
|
|
|
|
ospfVirtIfStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfVirtIfState -- The new state
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfStateChange trap signifies that there
|
|
has been a change in the state of an OSPF vir-
|
|
tual interface.
|
|
This trap should be generated when the inter-
|
|
face state regresses (e.g., goes from Point-
|
|
to-Point to Down) or progresses to a terminal
|
|
state (i.e., Point-to-Point)."
|
|
::= { ospfTraps 1 }
|
|
|
|
|
|
ospfNbrStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfNbrIpAddr,
|
|
ospfNbrAddressLessIndex,
|
|
ospfNbrRtrId,
|
|
ospfNbrState -- The new state
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfNbrStateChange trap signifies that
|
|
there has been a change in the state of a non-
|
|
virtual OSPF neighbor. This trap should be
|
|
generated when the neighbor state regresses
|
|
(e.g., goes from Attempt or Full to 1-Way or
|
|
Down) or progresses to a terminal state (e.g.,
|
|
2-Way or Full). When an neighbor transitions
|
|
from or to Full on non-broadcast multi-access
|
|
and broadcast networks, the trap should be gen-
|
|
erated by the designated router. A designated
|
|
router transitioning to Down will be noted by
|
|
ospfIfStateChange."
|
|
::= { ospfTraps 2 }
|
|
|
|
|
|
ospfVirtNbrStateChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtNbrArea,
|
|
ospfVirtNbrRtrId,
|
|
ospfVirtNbrState -- The new state
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfStateChange trap signifies that there
|
|
has been a change in the state of an OSPF vir-
|
|
tual neighbor. This trap should be generated
|
|
when the neighbor state regresses (e.g., goes
|
|
from Attempt or Full to 1-Way or Down) or
|
|
progresses to a terminal state (e.g., Full)."
|
|
::= { ospfTraps 3 }
|
|
ospfIfConfigError NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfPacketSrc, -- The source IP address
|
|
ospfConfigErrorType, -- Type of error
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfConfigError trap signifies that a
|
|
packet has been received on a non-virtual in-
|
|
terface from a router whose configuration
|
|
parameters conflict with this router's confi-
|
|
guration parameters. Note that the event op-
|
|
tionMismatch should cause a trap only if it
|
|
prevents an adjacency from forming."
|
|
::= { ospfTraps 4 }
|
|
|
|
|
|
ospfVirtIfConfigError NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfConfigErrorType, -- Type of error
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfConfigError trap signifies that a pack-
|
|
et has been received on a virtual interface
|
|
from a router whose configuration parameters
|
|
conflict with this router's configuration
|
|
parameters. Note that the event optionMismatch
|
|
should cause a trap only if it prevents an ad-
|
|
jacency from forming."
|
|
::= { ospfTraps 5 }
|
|
|
|
|
|
ospfIfAuthFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfPacketSrc, -- The source IP address
|
|
ospfConfigErrorType, -- authTypeMismatch or
|
|
-- authFailure
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfAuthFailure trap signifies that a
|
|
packet has been received on a non-virtual in-
|
|
terface from a router whose authentication key
|
|
or authentication type conflicts with this
|
|
router's authentication key or authentication
|
|
type."
|
|
::= { ospfTraps 6 }
|
|
|
|
|
|
ospfVirtIfAuthFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfConfigErrorType, -- authTypeMismatch or
|
|
-- authFailure
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfVirtIfAuthFailure trap signifies that a
|
|
packet has been received on a virtual interface
|
|
from a router whose authentication key or au-
|
|
thentication type conflicts with this router's
|
|
authentication key or authentication type."
|
|
::= { ospfTraps 7 }
|
|
|
|
|
|
ospfIfRxBadPacket NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfPacketSrc, -- The source IP address
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfIfRxBadPacket trap signifies that an
|
|
OSPF packet has been received on a non-virtual
|
|
interface that cannot be parsed."
|
|
::= { ospfTraps 8 }
|
|
|
|
ospfVirtIfRxBadPacket NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfPacketType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfRxBadPacket trap signifies that an OSPF
|
|
packet has been received on a virtual interface
|
|
that cannot be parsed."
|
|
::= { ospfTraps 9 }
|
|
|
|
|
|
ospfTxRetransmit NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfIfIpAddress,
|
|
ospfAddressLessIf,
|
|
ospfNbrRtrId, -- Destination
|
|
ospfPacketType,
|
|
ospfLsdbType,
|
|
ospfLsdbLsid,
|
|
ospfLsdbRouterId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfTxRetransmit trap signifies than an
|
|
OSPF packet has been retransmitted on a non-
|
|
virtual interface. All packets that may be re-
|
|
transmitted are associated with an LSDB entry.
|
|
The LS type, LS ID, and Router ID are used to
|
|
identify the LSDB entry."
|
|
::= { ospfTraps 10 }
|
|
|
|
|
|
ospfVirtIfTxRetransmit NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfVirtIfAreaId,
|
|
ospfVirtIfNeighbor,
|
|
ospfPacketType,
|
|
ospfLsdbType,
|
|
ospfLsdbLsid,
|
|
ospfLsdbRouterId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfTxRetransmit trap signifies than an
|
|
OSPF packet has been retransmitted on a virtual
|
|
interface. All packets that may be retransmit-
|
|
ted are associated with an LSDB entry. The LS
|
|
type, LS ID, and Router ID are used to identify
|
|
the LSDB entry."
|
|
::= { ospfTraps 11 }
|
|
|
|
|
|
ospfOriginateLsa NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
|
|
ospfLsdbType,
|
|
ospfLsdbLsid,
|
|
ospfLsdbRouterId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfOriginateLsa trap signifies that a new
|
|
LSA has been originated by this router. This
|
|
trap should not be invoked for simple refreshes
|
|
of LSAs (which happesn every 30 minutes), but
|
|
instead will only be invoked when an LSA is
|
|
(re)originated due to a topology change. Addi-
|
|
tionally, this trap does not include LSAs that
|
|
are being flushed because they have reached
|
|
MaxAge."
|
|
::= { ospfTraps 12 }
|
|
|
|
|
|
ospfMaxAgeLsa NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
|
|
ospfLsdbType,
|
|
ospfLsdbLsid,
|
|
ospfLsdbRouterId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfMaxAgeLsa trap signifies that one of
|
|
the LSA in the router's link-state database has
|
|
aged to MaxAge."
|
|
::= { ospfTraps 13 }
|
|
|
|
|
|
ospfLsdbOverflow NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfExtLsdbLimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfLsdbOverflow trap signifies that the
|
|
number of LSAs in the router's link-state data-
|
|
base has exceeded ospfExtLsdbLimit."
|
|
::= { ospfTraps 14 }
|
|
|
|
|
|
ospfLsdbApproachingOverflow NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ospfRouterId, -- The originator of the trap
|
|
ospfExtLsdbLimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An ospfLsdbApproachingOverflow trap signifies
|
|
that the number of LSAs in the router's link-
|
|
state database has exceeded ninety percent of
|
|
ospfExtLsdbLimit."
|
|
::= { ospfTraps 15 }
|
|
|
|
|
|
-- conformance information
|
|
|
|
ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
|
|
|
|
ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
|
|
ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
ospfTrapCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement "
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ospfTrapControlGroup }
|
|
|
|
|
|
GROUP ospfTrapControlGroup
|
|
DESCRIPTION
|
|
"This group is optional but recommended for all
|
|
OSPF systems"
|
|
::= { ospfTrapCompliances 1 }
|
|
|
|
|
|
-- units of conformance
|
|
|
|
ospfTrapControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ospfSetTrap,
|
|
ospfConfigErrorType,
|
|
ospfPacketType,
|
|
ospfPacketSrc
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required to control traps
|
|
from OSPF systems."
|
|
::= { ospfTrapGroups 1 }
|
|
|
|
|
|
END
|