Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
944 lines
31 KiB
Text
944 lines
31 KiB
Text
CISCOSB-SNMP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
switch001 FROM CISCOSB-MIB
|
|
OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Integer32 FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString, AutonomousType FROM SNMPv2-TC
|
|
RowStatus, TruthValue, TimeInterval FROM SNMPv2-TC
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
|
|
snmpTargetAddrExtEntry FROM SNMP-COMMUNITY-MIB
|
|
SnmpEngineID, SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
usmUserEntry FROM SNMP-USER-BASED-SM-MIB;
|
|
|
|
rlSNMP MODULE-IDENTITY
|
|
LAST-UPDATED "202105190000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"Private MIB module for SNMP support in CISCOSB devices."
|
|
REVISION "202105190000Z"
|
|
DESCRIPTION
|
|
"Added support in usmUserTable augment for authentication and
|
|
privacy passwords saving."
|
|
REVISION "201002150000Z"
|
|
DESCRIPTION
|
|
"1. Changed SYNTAX of rlSnmpEngineID from
|
|
OCTET STRING (SIZE(5..32))to SnmpEngineID.
|
|
2. Added rlInet2EngineIdTable."
|
|
REVISION "200709100000Z"
|
|
DESCRIPTION
|
|
"Added rlEvents MIB."
|
|
REVISION "200606060000Z"
|
|
DESCRIPTION
|
|
"Added rlSNMPenable object."
|
|
REVISION "0410200000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { switch001 98 }
|
|
|
|
rlSNMPv3 OBJECT IDENTIFIER ::= { rlSNMP 1 }
|
|
|
|
rlTargetParamsTestingLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level of the tests done when configuring an entry in the snmpTargetParamsTable."
|
|
::= { rlSNMPv3 1 }
|
|
|
|
rlNotifyFilterTestingLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level of the tests done when configuring an entry in the snmpNotifyFilterTable."
|
|
::= { rlSNMPv3 2 }
|
|
|
|
rlSnmpEngineID OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A variable for setting the router's local engineID value.
|
|
Setting this variable will effect the value of snmpEngineID. Setting this
|
|
variable to the value '00 00 00 00 00'H will cause snmpEngineID to get
|
|
an automatically created value based on the device basic MAC address.
|
|
This method of setting the agent's engineID is recommended for stand-alone
|
|
systems. Setting this variable to any other (valid) value will set snmpEngineID
|
|
to this value. Setting this variable to all 'ff'H or all zeros is not
|
|
allowed, with the exception of the value '00 00 00 00 00'H.
|
|
The last method is recommended for stackable system, in order for the
|
|
engineID to be unique within an administrative domain.
|
|
Setting this value (to a value different then the default value)
|
|
is required before configuring users data in usmUserTable and
|
|
vacmSecurityToGroupTable.
|
|
Changing the value of this variable has 2 side-effects:
|
|
- All user data will be deleted, including: all usmUserTable configured entries and
|
|
vacmSecurityToGroupTable entries where vacmSecurityModel = 3.
|
|
- All snmpCommunityTable entries with snmpCommunityContextEngineID value
|
|
equal to old rlSnmpEngineID value, will be updated with the new
|
|
rlSnmpEngineID value."
|
|
DEFVAL { '0000000001'H }
|
|
::= { rlSNMPv3 3 }
|
|
|
|
rlSNMPv3IpAddrToIndexTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSNMPv3IpAddrToIndexEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table maps ip addresses to indices. The output index
|
|
is used as a component in some SNMPv3 tables fields (for example:
|
|
snmpTargetAddrName). Ipv4 addresses are not supported by this table.
|
|
Note: in getNext operations on this table, only mappings which are in use
|
|
in snmpTargetAddrTable (using rlTargetAddrMagicUsedInIndex) will be retreived.
|
|
The mapped index does not include delimiters which are forbidden
|
|
in SNMPv3 tag values (and thus can be used in tag fields). "
|
|
::= { rlSNMPv3 4 }
|
|
|
|
rlSNMPv3IpAddrToIndexEntry OBJECT-TYPE
|
|
SYNTAX RlSNMPv3IpAddrToIndexEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlSNMPv3IpAddrToIndexAddrType,
|
|
rlSNMPv3IpAddrToIndexAddr }
|
|
::= { rlSNMPv3IpAddrToIndexTable 1 }
|
|
|
|
RlSNMPv3IpAddrToIndexEntry ::= SEQUENCE {
|
|
rlSNMPv3IpAddrToIndexAddrType InetAddressType,
|
|
rlSNMPv3IpAddrToIndexAddr InetAddress,
|
|
rlSNMPv3IpAddrToIndexMappedIndex OCTET STRING
|
|
}
|
|
|
|
rlSNMPv3IpAddrToIndexAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of NMS IP address."
|
|
::= { rlSNMPv3IpAddrToIndexEntry 1 }
|
|
|
|
rlSNMPv3IpAddrToIndexAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NMS IP address."
|
|
::= { rlSNMPv3IpAddrToIndexEntry 2 }
|
|
|
|
rlSNMPv3IpAddrToIndexMappedIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index mapped for this row ip address."
|
|
::= { rlSNMPv3IpAddrToIndexEntry 3 }
|
|
|
|
rlTargetAddrExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlTargetAddrExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends rlTargetAddrExtEntry. "
|
|
::= { rlSNMPv3 5 }
|
|
|
|
rlTargetAddrExtEntry OBJECT-TYPE
|
|
SYNTAX RlTargetAddrExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
AUGMENTS { snmpTargetAddrExtEntry }
|
|
::= { rlTargetAddrExtTable 1 }
|
|
|
|
RlTargetAddrExtEntry ::= SEQUENCE {
|
|
rlTargetAddrMagicUsedInIndex OCTET STRING
|
|
}
|
|
|
|
rlTargetAddrMagicUsedInIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0 | 4))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this field to a 4 octets length value means that ip mapping (using rlSNMPv3IpAddrToIndexTable)
|
|
is used for this row. If such a mapping is not used, a 0-length octet string
|
|
value should be used for this field (this is also the default).
|
|
This field value is determined only once, upon creation of an entry in the
|
|
snmpTargetAddrTable. A change in its value while updating an existing entry
|
|
is ignored.
|
|
Prior to creating a snmpTargetAddrTable entry with a 4 octets length value for
|
|
this field, the rlSNMPv3IpAddrToIndexTable must be used in order to retrieve
|
|
this value."
|
|
DEFVAL { "" }
|
|
::= { rlTargetAddrExtEntry 1 }
|
|
|
|
rlInet2EngineIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlInet2EngineIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table maps inet addresses to SNMPv3 engine identifiers. "
|
|
::= { rlSNMPv3 6 }
|
|
|
|
rlInet2EngineIdEntry OBJECT-TYPE
|
|
SYNTAX RlInet2EngineIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlInet2EngineIdAddressType, rlInet2EngineIdAddress}
|
|
::= { rlInet2EngineIdTable 1 }
|
|
|
|
RlInet2EngineIdEntry ::= SEQUENCE {
|
|
rlInet2EngineIdAddressType InetAddressType,
|
|
rlInet2EngineIdAddress InetAddress,
|
|
rlInet2EngineIdEngineId SnmpEngineID,
|
|
rlInet2EngineIdStatus RowStatus
|
|
}
|
|
|
|
rlInet2EngineIdAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inet address type of the mapped inet address."
|
|
::= { rlInet2EngineIdEntry 1 }
|
|
|
|
rlInet2EngineIdAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mapped inet address."
|
|
::= { rlInet2EngineIdEntry 2 }
|
|
|
|
rlInet2EngineIdEngineId OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv3 engine id to which the address denoted by rlInet2EngineIdAddressType and rlInet2EngineIdAddress is mapped."
|
|
::= { rlInet2EngineIdEntry 3 }
|
|
|
|
rlInet2EngineIdStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management control for this table."
|
|
DEFVAL { createAndGo }
|
|
::= { rlInet2EngineIdEntry 4 }
|
|
|
|
|
|
rlSNMPDomains OBJECT IDENTIFIER ::= { rlSNMP 2 }
|
|
|
|
rlSnmpUDPMridDomain OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv2 over UDP transport domain, used when Multi-Instance Router
|
|
is supported (more than one MIR instance exist).
|
|
The corresponding transport address is of type RlSnmpUDPMridAddress."
|
|
::= { rlSNMPDomains 1 }
|
|
|
|
RlSnmpUDPMridAddress ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1d.1d.1d.1d/2d/2d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the UDP address of NMS and the MRID through which it is
|
|
connected in order to access the agent:
|
|
octets contents encoding
|
|
1-4 IP-address network-byte order
|
|
5-6 UDP-port network-byte order
|
|
7-8 MRID network-byte order
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
|
|
rlSnmpUdpIpv6MridDomain OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router
|
|
is supported (more than one MIR instance exist).
|
|
The corresponding transport address is of type RlSnmpUDPIpv6MridAddress
|
|
for global IPv6 addresses."
|
|
::= { rlSNMPDomains 2 }
|
|
|
|
RlSnmpUDPIpv6MridAddress ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x]0a:2d:2d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the UDP address of NMS and the MRID through which it is
|
|
connected in order to access the agent:
|
|
octets contents encoding
|
|
1-16 IPv6 address network-byte order
|
|
17-18 UDP-port network-byte order
|
|
19-20 MRID network-byte order "
|
|
SYNTAX OCTET STRING (SIZE (20))
|
|
|
|
rlSnmpUdpIpv6zMridDomain OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router
|
|
is supported (more than one MIR instance exist).
|
|
The corresponding transport address is of type RlSnmpUDPIpv6zMridAddress
|
|
for scoped IPv6 addresses with a zone index."
|
|
::= { rlSNMPDomains 3 }
|
|
|
|
RlSnmpUDPIpv6zMridAddress ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x%4d]0a:2d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the UDP address of NMS (consisting of an IPv6 address,
|
|
a zone index and a port number) and the MRID through which it is
|
|
connected in order to access the agent:
|
|
octets contents encoding
|
|
1-16 IPv6 address network-byte order
|
|
17-20 zone index network-byte order
|
|
21-22 UDP-port network-byte order
|
|
23-24 MRID network-byte order "
|
|
SYNTAX OCTET STRING (SIZE (24))
|
|
|
|
|
|
rlSnmpRequestMridTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSnmpRequestMridEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for determining the Mrid for the current SNMP request."
|
|
::= { rlSNMP 3 }
|
|
|
|
rlSnmpRequestMridEntry OBJECT-TYPE
|
|
SYNTAX RlSnmpRequestMridEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlSnmpRequestManagedMrid }
|
|
::= { rlSnmpRequestMridTable 1 }
|
|
|
|
RlSnmpRequestMridEntry ::= SEQUENCE {
|
|
rlSnmpRequestManagedMrid INTEGER,
|
|
rlSnmpRequestMridStatus INTEGER }
|
|
|
|
rlSnmpRequestManagedMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router instance the NMS wants to manage in the current SNMP request.
|
|
The value of this object, when attaching a variable instance of the
|
|
rlSnmpRequestManagedMridTable to an SNMP request, will determine the
|
|
managed Mrid for this request.
|
|
It is important to mention that the variable insance must be attached
|
|
as the first variable in the PDU in order to influence all variables."
|
|
::= { rlSnmpRequestMridEntry 1 }
|
|
|
|
rlSnmpRequestMridStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry."
|
|
::= { rlSnmpRequestMridEntry 2 }
|
|
|
|
rlSNMPenable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables SNMP."
|
|
DEFVAL { enable }
|
|
::= { rlSNMP 4 }
|
|
|
|
rndCommunityInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RndCommunityInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community table of the agent"
|
|
::= { rlSNMP 5 }
|
|
|
|
rndCommunityInetEntry OBJECT-TYPE
|
|
SYNTAX RndCommunityInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rndCommunityInetMngStationAddrType, rndCommunityInetMngStationAddr,
|
|
IMPLIED rndCommunityInetString }
|
|
::= { rndCommunityInetTable 1 }
|
|
|
|
RndCommunityInetEntry ::= SEQUENCE {
|
|
rndCommunityInetMngStationAddrType InetAddressType,
|
|
rndCommunityInetMngStationAddr InetAddress,
|
|
rndCommunityInetString DisplayString,
|
|
rndCommunityInetAccess INTEGER,
|
|
rndCommunityInetTrapsEnable INTEGER,
|
|
rndCommunityInetStatus INTEGER,
|
|
rndCommunityInetPortSecurity INTEGER,
|
|
rndCommunityInetOwner DisplayString,
|
|
rndCommunityInetTrapDestPort INTEGER,
|
|
rndCommunityInetAltAddrType InetAddressType,
|
|
rndCommunityInetAltAddr InetAddress
|
|
|
|
}
|
|
|
|
rndCommunityInetMngStationAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the management station that will be allowed to
|
|
communicate with the agent IP address"
|
|
::= { rndCommunityInetEntry 1 }
|
|
|
|
|
|
rndCommunityInetMngStationAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address of the management station that will be allowed to
|
|
communicate with the agent IP address"
|
|
::= { rndCommunityInetEntry 2 }
|
|
|
|
rndCommunityInetString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community string with which the management
|
|
station will communicate with the agent"
|
|
::= { rndCommunityInetEntry 3 }
|
|
|
|
rndCommunityInetAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readOnly(1),
|
|
readWrite(2),
|
|
super(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The allowed access to this management station"
|
|
::= { rndCommunityInetEntry 4}
|
|
|
|
rndCommunityInetTrapsEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
snmpV1(1),
|
|
snmpV2(2),
|
|
snmpV3(3),
|
|
trapsDisable(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Should the agent send traps to the management station,
|
|
and what version is required"
|
|
::= { rndCommunityInetEntry 5 }
|
|
|
|
rndCommunityInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. If the status is invalid the
|
|
community entry will be deleted"
|
|
::= { rndCommunityInetEntry 6 }
|
|
|
|
rndCommunityInetPortSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled the device will only receive SNMP messages from the port,
|
|
through which this NMS is reachable from the device."
|
|
DEFVAL { disabled }
|
|
::= { rndCommunityInetEntry 7 }
|
|
|
|
rndCommunityInetOwner OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The owner of this community"
|
|
::= { rndCommunityInetEntry 8 }
|
|
|
|
rndCommunityInetTrapDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transport protocol (usually UDP) port to which traps to the
|
|
management station represebted by this entry will be sent. The default
|
|
is the well-known IANA assigned port number for SNMP traps.
|
|
This object is relevant only if rndCommunityInetTrapsEnable has a value
|
|
different from trapsDisable."
|
|
DEFVAL { 162 }
|
|
::= { rndCommunityInetEntry 9 }
|
|
|
|
rndCommunityInetAltAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For testing purposes"
|
|
::= { rndCommunityInetEntry 10 }
|
|
|
|
|
|
rndCommunityInetAltAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For testing purposes"
|
|
::= { rndCommunityInetEntry 11 }
|
|
|
|
rlMridInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlMridInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MRID related configurations table of the agent"
|
|
::= { rlSNMP 6 }
|
|
|
|
rlMridInetEntry OBJECT-TYPE
|
|
SYNTAX RlMridInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rndCommunityInetMngStationAddrType, rndCommunityInetMngStationAddr,
|
|
IMPLIED rndCommunityInetString }
|
|
::= { rlMridInetTable 1 }
|
|
|
|
RlMridInetEntry ::= SEQUENCE {
|
|
rlMridInetConnection INTEGER,
|
|
rlInetManagedMrid INTEGER
|
|
}
|
|
|
|
rlMridInetConnection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router instance connecting the NMS who accessed the agent
|
|
through the community table entry corresponding to the keys of this entry."
|
|
::= { rlMridInetEntry 1 }
|
|
|
|
rlInetManagedMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router instance currently managed by the NMS who accessed the agent
|
|
through the community table entry corresponding to the keys of this entry "
|
|
::= { rlMridInetEntry 2 }
|
|
|
|
rlEvents OBJECT IDENTIFIER ::= { rlSNMP 7 }
|
|
|
|
rlEventsPollerId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The rlEventsPollerId is the 1st key in all the rlEvents tables. Each poller must first GET from this
|
|
object his Id. The agent will ensure uniqueness."
|
|
::= { rlEvents 1 }
|
|
|
|
rlEventsDefaultPollingInterval OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default polling time. Will be used to detrermined whether the events configured by a poller in
|
|
rlEventsTable can be destroyed, in absence of an entry for this poller in the rlEventsPollingControlTable."
|
|
::= { rlEvents 2 }
|
|
|
|
|
|
rlEventsDeleteEvents OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" SETting a id of an active poller will cause all the rows of this poller in the rlEventsTable
|
|
to be destroyed. This is equivalent to SETting rlEventsStatus of each row of this poller to 'destroy'.
|
|
GET operation on this variable is meaningless, and the value 0 will be returned in this case (actual
|
|
pollers start from 1)."
|
|
::= { rlEvents 3 }
|
|
|
|
|
|
rlEventsMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEventsMaskEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table showing the events mask for each client."
|
|
::= { rlEvents 4 }
|
|
|
|
rlEventsMaskEntry OBJECT-TYPE
|
|
SYNTAX RlEventsMaskEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlEventsMaskPollerId }
|
|
::= { rlEventsMaskTable 1 }
|
|
|
|
|
|
RlEventsMaskEntry ::= SEQUENCE {
|
|
rlEventsMaskPollerId INTEGER,
|
|
rlEventsMaskMask OCTET STRING
|
|
}
|
|
|
|
rlEventsMaskPollerId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The poller id whose events are shown in this table "
|
|
::= { rlEventsMaskEntry 1 }
|
|
|
|
|
|
rlEventsMaskMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The semantics of the rlEventsMask is an array of timestamps (each 4 octets
|
|
containing one time stamp). Each timestamp is in TimeTicks units encoded in network order.
|
|
Thus the mask can contain up to 40 timestamps. If a place in the array is empty it will contain
|
|
0.
|
|
Each timestamp shows the time of the last occurrence of the event whose
|
|
rlEventIndexKey in the rlEventsTable for this client id is the same as its index in the array.
|
|
Each for bytes of the rlEventsMask will contain the timestamp in TimeTicks
|
|
units encoded in network order of the last time the event "
|
|
::= { rlEventsMaskEntry 2 }
|
|
|
|
rlEventsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEventsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table relating the events recorded to the indices in the rlEventsMask."
|
|
::= { rlEvents 5 }
|
|
|
|
rlEventsEntry OBJECT-TYPE
|
|
SYNTAX RlEventsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlEventsPoller, IMPLIED rlEventId }
|
|
::= { rlEventsTable 1 }
|
|
|
|
|
|
RlEventsEntry ::= SEQUENCE {
|
|
rlEventsPoller INTEGER,
|
|
rlEventId OBJECT IDENTIFIER,
|
|
rlEventIndexInMask INTEGER,
|
|
rlEventsStatus RowStatus
|
|
}
|
|
|
|
rlEventsPoller OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The poller id whose event definitions are shown in this table."
|
|
::= { rlEventsEntry 1 }
|
|
|
|
rlEventId OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The event id of the polled event. This is the notification object identifier (in case of a
|
|
SNMPV2 notification) or the translation to SNMPv2 notation of an SNMPv1 trap according to the RFC 3584
|
|
(SNMP versions coexistence)."
|
|
::= { rlEventsEntry 2 }
|
|
|
|
rlEventIndexInMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index in the rlEventsMaskMask of this poller id that has been allocated for this event by the device."
|
|
::= { rlEventsEntry 3 }
|
|
|
|
rlEventsStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RowStatus for this table. Note that the device may refuse for resource shortage reasons to honour a create request
|
|
for this poller even if apparently there still is room in his rlEventsMaskMask (i.e. the poller has requested
|
|
monitoring of less than 40 events). "
|
|
::= { rlEventsEntry 4 }
|
|
|
|
|
|
rlEventsPollingControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEventsPollingControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The polling control table for a poller. Currently contain only the polling interval."
|
|
::= { rlEvents 6 }
|
|
|
|
rlEventsPollingControlEntry OBJECT-TYPE
|
|
SYNTAX RlEventsPollingControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlEventsPollingControlPollerId }
|
|
::= { rlEventsPollingControlTable 1 }
|
|
|
|
|
|
RlEventsPollingControlEntry ::= SEQUENCE {
|
|
rlEventsPollingControlPollerId INTEGER,
|
|
rlEventsPollingControlPollingInterval TimeTicks
|
|
}
|
|
|
|
rlEventsPollingControlPollerId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The poller id whose polling controls are shown in this table."
|
|
::= { rlEventsPollingControlEntry 1 }
|
|
|
|
|
|
rlEventsPollingControlPollingInterval OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired polling interval for this poller. If the device has determined that the poller has not
|
|
polled the device for 3 times this polling interval it may destroy all the data related to this poller
|
|
in the rlevents database "
|
|
::= { rlEventsPollingControlEntry 2 }
|
|
|
|
|
|
rlUsmUserExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlUsmUserExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends usmUserEntry. "
|
|
::= { rlSNMPv3 8 }
|
|
|
|
rlUsmUserExtEntry OBJECT-TYPE
|
|
SYNTAX RlUsmUserExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
AUGMENTS { usmUserEntry }
|
|
::= { rlUsmUserExtTable 1 }
|
|
|
|
RlUsmUserExtEntry ::= SEQUENCE {
|
|
rlUsmUserAuthPassword DisplayString,
|
|
rlUsmUserPrivPassword DisplayString
|
|
}
|
|
|
|
rlUsmUserAuthPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication password.
|
|
Setting the field to a non zero-length value will convert the given password
|
|
to a localized authentication key, appropriate to the corresponding
|
|
usmUserAuthProtocol field. The key is localized using the appropriate
|
|
usmUserEngineID field, according to the algorithm specified in RFC 2574.
|
|
This field may be set to a non zero-length value if the following conditions hold:
|
|
1) This is the creation of the entry.
|
|
2) The value of the corresponding usmUserCloneFrom field is zeroDotZero.
|
|
Setting the field in any other case will cause no effect."
|
|
DEFVAL { "" }
|
|
::= { rlUsmUserExtEntry 1 }
|
|
|
|
|
|
rlUsmUserPrivPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Privacy password.
|
|
Setting the field to a non zero-length value will convert the given password
|
|
to a localized privacy key, appropriate to the corresponding
|
|
usmUserAuthProtocol field. The key is localized using the appropriate
|
|
usmUserEngineID field, according to the algorithm specified in RFC 2574.
|
|
This field may be set to a non zero-length value if the following conditions hold:
|
|
1) This is the creation of the entry.
|
|
2) The value of the corresponding usmUserCloneFrom field is zeroDotZero.
|
|
Setting the field in any other case will cause no effect."
|
|
DEFVAL { "" }
|
|
::= { rlUsmUserExtEntry 2 }
|
|
|
|
|
|
rlSnmpClient OBJECT IDENTIFIER ::= { rlSNMP 8 }
|
|
|
|
rlSnmpClientAgentsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSnmpClientAgentsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table maintains the user agents to which the SNMP client will send requests"
|
|
::= { rlSnmpClient 1 }
|
|
|
|
rlSnmpClientAgentsEntry OBJECT-TYPE
|
|
SYNTAX RlSnmpClientAgentsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlSnmpClientAgentsAddressType, rlSnmpClientAgentsAddress }
|
|
::= { rlSnmpClientAgentsTable 1 }
|
|
|
|
RlSnmpClientAgentsEntry ::= SEQUENCE {
|
|
rlSnmpClientAgentsAddressType InetAddressType,
|
|
rlSnmpClientAgentsAddress InetAddress,
|
|
rlSnmpClientAgentsCommunity OCTET STRING,
|
|
rlSnmpClientAgentsUsername SnmpAdminString,
|
|
rlSnmpClientAgentsAuthProtocol AutonomousType,
|
|
rlSnmpClientAgentsPrivProtocol AutonomousType,
|
|
rlSnmpClientAgentsAuthKey OCTET STRING,
|
|
rlSnmpClientAgentsPrivKey OCTET STRING,
|
|
rlSnmpClientAgentsTimeout TimeInterval,
|
|
rlSnmpClientAgentsRetries Integer32,
|
|
rlSnmpClientAgentsStatus RowStatus
|
|
}
|
|
|
|
rlSnmpClientAgentsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Remote Agent IP address."
|
|
::= { rlSnmpClientAgentsEntry 1 }
|
|
|
|
rlSnmpClientAgentsAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent IP address."
|
|
::= { rlSnmpClientAgentsEntry 2 }
|
|
|
|
rlSnmpClientAgentsCommunity OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv1/v2 community string. Either this field or rlSnmpClientAgentsUsername
|
|
must be configured to a non-empty string."
|
|
DEFVAL { "" }
|
|
::= { rlSnmpClientAgentsEntry 3 }
|
|
|
|
rlSnmpClientAgentsUsername OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 username string."
|
|
DEFVAL { "" }
|
|
::= { rlSnmpClientAgentsEntry 4 }
|
|
|
|
rlSnmpClientAgentsAuthProtocol OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 authentication protocol."
|
|
DEFVAL { usmNoAuthProtocol }
|
|
::= { rlSnmpClientAgentsEntry 5 }
|
|
|
|
rlSnmpClientAgentsPrivProtocol OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 privacy protocol."
|
|
DEFVAL { usmNoPrivProtocol }
|
|
::= { rlSnmpClientAgentsEntry 6 }
|
|
|
|
rlSnmpClientAgentsAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 authentication key. The key size should be consistent
|
|
with the chosen authentication protocol."
|
|
DEFVAL { "" }
|
|
::= { rlSnmpClientAgentsEntry 7 }
|
|
|
|
rlSnmpClientAgentsPrivKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 privacy key. The key size should be consistent
|
|
with the chosen privacy protocol."
|
|
DEFVAL { "" }
|
|
::= { rlSnmpClientAgentsEntry 8 }
|
|
|
|
rlSnmpClientAgentsTimeout OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default timeout between 2 successive retries of sending SNMP requests to
|
|
the agent. An application using the SNMP client may provide its own timeout
|
|
value."
|
|
DEFVAL { 1500 }
|
|
::= { rlSnmpClientAgentsEntry 9 }
|
|
|
|
rlSnmpClientAgentsRetries OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default number of retries the SNMP client should preform, in case no
|
|
response is received from the agent. An application using the SNMP client
|
|
may provide its own retries value. "
|
|
DEFVAL { 3 }
|
|
::= { rlSnmpClientAgentsEntry 10 }
|
|
|
|
rlSnmpClientAgentsStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management control for this table."
|
|
DEFVAL { createAndGo }
|
|
::= { rlSnmpClientAgentsEntry 11 }
|
|
|
|
|
|
END
|