Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
4401 lines
160 KiB
Text
4401 lines
160 KiB
Text
CTRON-IP-ROUTER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ctron-ip-router-mib.txt
|
|
-- Revision: 1.02.02
|
|
-- Part Number: 2170986
|
|
-- Date: May 8, 1998
|
|
|
|
|
|
-- Cabletron Systems, Inc.
|
|
-- 35 Industrial Way, P.O. Box 5005
|
|
-- Rochester, NH 03867-0505
|
|
-- (603) 332-9400
|
|
-- support@ctron.com
|
|
|
|
-- This module provides authoritative definitions for Cabletron's
|
|
-- enterprise specific IP Routing Services MIB.
|
|
--
|
|
-- This module will be extended, as required.
|
|
--
|
|
|
|
-- Cabletron Systems reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Cabletron
|
|
-- Systems has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Cabletron products.
|
|
-- Copyright August 95 Cabletron Systems
|
|
--
|
|
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
|
|
DisplayString, PhysAddress
|
|
FROM RFC1213-MIB
|
|
|
|
nwRtrProtoSuites
|
|
FROM ROUTER-OIDS
|
|
|
|
IpAddress, Counter, TimeTicks, Gauge
|
|
FROM RFC1155-SMI;
|
|
|
|
|
|
|
|
-- The IP Router Group.
|
|
|
|
nwIpRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 1 }
|
|
|
|
nwIpMibs OBJECT IDENTIFIER ::= { nwIpRouter 1 }
|
|
nwIpComponents OBJECT IDENTIFIER ::= { nwIpRouter 2 }
|
|
|
|
-- Ip Router Component Groups
|
|
|
|
nwIpSystem OBJECT IDENTIFIER ::= { nwIpComponents 1 }
|
|
nwIpForwarding OBJECT IDENTIFIER ::= { nwIpComponents 2 }
|
|
nwIpTopology OBJECT IDENTIFIER ::= { nwIpComponents 4 }
|
|
nwIpFib OBJECT IDENTIFIER ::= { nwIpComponents 5 }
|
|
nwIpEndSystems OBJECT IDENTIFIER ::= { nwIpComponents 6 }
|
|
nwIpAccessControl OBJECT IDENTIFIER ::= { nwIpComponents 7 }
|
|
nwIpFilters OBJECT IDENTIFIER ::= { nwIpComponents 8 }
|
|
nwIpRedirector OBJECT IDENTIFIER ::= { nwIpComponents 9 }
|
|
nwIpEvent OBJECT IDENTIFIER ::= { nwIpComponents 10 }
|
|
nwIpWorkGroup OBJECT IDENTIFIER ::= { nwIpComponents 11 }
|
|
nwIpClientServices OBJECT IDENTIFIER ::= { nwIpComponents 12 }
|
|
--ctNat OBJECT IDENTIFIER ::= { nwIpClientServices 1 }
|
|
--ctDhcp OBJECT IDENTIFIER ::= { nwIpClientServices 2 }
|
|
|
|
|
|
-- IP Router System Groups
|
|
|
|
-- This group contains the objects that pertain to the IP routing
|
|
-- services at a global, device-wide level.
|
|
|
|
nwIpSysConfig OBJECT IDENTIFIER ::= { nwIpSystem 1 }
|
|
nwIpSysAdministration OBJECT IDENTIFIER ::= { nwIpSystem 2 }
|
|
|
|
|
|
-- IP Forwarding Group
|
|
|
|
-- This group contains the managed objects used to setup and configure
|
|
-- the IP router ports for packet forwarding as well as the aggregate
|
|
-- and per-interface IP packet forwarding counters.
|
|
|
|
nwIpFwdSystem OBJECT IDENTIFIER ::= { nwIpForwarding 1 }
|
|
nwIpFwdInterfaces OBJECT IDENTIFIER ::= { nwIpForwarding 2 }
|
|
|
|
nwIpFwdCounters OBJECT IDENTIFIER ::= { nwIpFwdSystem 1 }
|
|
nwIpFwdIfConfig OBJECT IDENTIFIER ::= { nwIpFwdInterfaces 1 }
|
|
nwIpFwdIfCounters OBJECT IDENTIFIER ::= { nwIpFwdInterfaces 2 }
|
|
|
|
|
|
-- IP Topology Group
|
|
|
|
-- Implementation of the nwIpTopology group is optional. This group
|
|
-- will be implemented by those devices that support Routing Services.
|
|
-- This group contains the managed objects for the routing and service
|
|
-- advertisements of the IP router. These managed objects allow for
|
|
-- the routing agents and service agents to be controlled and monitored
|
|
-- on a system-wide as well as a router port basis.
|
|
|
|
nwIpDistanceVector OBJECT IDENTIFIER ::= { nwIpTopology 1 }
|
|
nwIpLinkState OBJECT IDENTIFIER ::= { nwIpTopology 2 }
|
|
|
|
nwIpRip OBJECT IDENTIFIER ::= { nwIpDistanceVector 1 }
|
|
|
|
nwIpRipSystem OBJECT IDENTIFIER ::= { nwIpRip 1 }
|
|
nwIpRipInterfaces OBJECT IDENTIFIER ::= { nwIpRip 2 }
|
|
nwIpRipDatabase OBJECT IDENTIFIER ::= { nwIpRip 3 }
|
|
nwIpRipFilters OBJECT IDENTIFIER ::= { nwIpRip 4 }
|
|
|
|
nwIpRipConfig OBJECT IDENTIFIER ::= { nwIpRipSystem 1 }
|
|
nwIpRipCounters OBJECT IDENTIFIER ::= { nwIpRipSystem 2 }
|
|
|
|
nwIpRipIfConfig OBJECT IDENTIFIER ::= { nwIpRipInterfaces 1 }
|
|
nwIpRipIfCounters OBJECT IDENTIFIER ::= { nwIpRipInterfaces 2 }
|
|
|
|
nwIpOspf OBJECT IDENTIFIER ::= { nwIpLinkState 1 }
|
|
|
|
nwIpOspfSystem OBJECT IDENTIFIER ::= { nwIpOspf 1 }
|
|
nwIpOspfInterfaces OBJECT IDENTIFIER ::= { nwIpOspf 2 }
|
|
nwIpOspfDatabase OBJECT IDENTIFIER ::= { nwIpOspf 3 }
|
|
nwIpOspfFilters OBJECT IDENTIFIER ::= { nwIpOspf 4 }
|
|
|
|
nwIpOspfConfig OBJECT IDENTIFIER ::= { nwIpOspfSystem 1 }
|
|
nwIpOspfCounters OBJECT IDENTIFIER ::= { nwIpOspfSystem 2 }
|
|
|
|
nwIpOspfIfConfig OBJECT IDENTIFIER ::= { nwIpOspfInterfaces 1 }
|
|
nwIpOspfIfCounters OBJECT IDENTIFIER ::= { nwIpOspfInterfaces 2 }
|
|
|
|
|
|
-- IP Forward Information Base (FIB) Group
|
|
|
|
-- This group contains the managed objects for the forwarding table of the
|
|
-- IP router. This table is built from entries in the IP routing table(s)
|
|
-- and reflects the routes that are considered the best routes to forward on.
|
|
-- This group is implemented in the IETF IP Forwarding Table (FIB) MIB
|
|
-- (rfc1354) and by the following system managed objects.
|
|
|
|
nwIpFibSystem OBJECT IDENTIFIER ::= { nwIpFib 1 }
|
|
nwIpOspfFib OBJECT IDENTIFIER ::= { nwIpFib 2 }
|
|
|
|
nwIpOspfFibControl OBJECT IDENTIFIER ::= { nwIpOspfFib 1 }
|
|
nwIpOspfFibEntries OBJECT IDENTIFIER ::= { nwIpOspfFib 2 }
|
|
|
|
|
|
-- IP Host End Systems Groups
|
|
|
|
-- This group contains the managed objects which control the use of the
|
|
-- Address Resolution Protocol (ARP) for mapping host addresses to physical
|
|
-- addresses of each router port ARP cache. Mechanisms are also
|
|
-- provided which allow 'snooping' such that all directly connected
|
|
-- end systems using ARP can be discovered along with their addresses.
|
|
|
|
nwIpHostsSystem OBJECT IDENTIFIER ::= { nwIpEndSystems 1 }
|
|
nwIpHostsInterfaces OBJECT IDENTIFIER ::= { nwIpEndSystems 2 }
|
|
nwIpHostsToMedia OBJECT IDENTIFIER ::= { nwIpEndSystems 3 }
|
|
|
|
-- IP Router Filters Group
|
|
|
|
-- IP Router Redirector Group
|
|
|
|
-- Implementation of the nwIpRedirector group is optional. This group
|
|
-- will be implemented by device that perform Routing Services. This
|
|
-- table contains the managed objects for the Broadcast UDP Port
|
|
-- Redirector within the IP Router.
|
|
|
|
nwIpRedirectorSystem OBJECT IDENTIFIER ::= { nwIpRedirector 1 }
|
|
nwIpRedirectorInterface OBJECT IDENTIFIER ::= { nwIpRedirector 2 }
|
|
|
|
-- IP Router Event Log Group
|
|
|
|
nwIpEventLogConfig OBJECT IDENTIFIER ::= { nwIpEvent 1 }
|
|
nwIpEventLogFilterTable OBJECT IDENTIFIER ::= { nwIpEvent 2 }
|
|
nwIpEventLogTable OBJECT IDENTIFIER ::= { nwIpEvent 3 }
|
|
|
|
-- IP Router Work-Group Group
|
|
|
|
|
|
-- IP MIB Group
|
|
-- This group contains information about the revision level of this
|
|
-- MIB within the device. It allows verification of the released
|
|
-- version without having to read other objects.
|
|
|
|
nwIpMibRevText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the IP MIB in
|
|
textual format."
|
|
::= { nwIpMibs 1 }
|
|
|
|
|
|
-- IP System Configuration Group
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the IP routing services at a global,
|
|
-- device-wide level.
|
|
|
|
nwIpSysRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address used to uniquely identify the host
|
|
(device) running IP Routing Services. The value of
|
|
nwIpSysRouterId is equal to the highest IP Address in
|
|
the IP Address Table."
|
|
::= { nwIpSysConfig 1 }
|
|
|
|
-- IP System Administration Group
|
|
-- This group contains the objects that pertain to the administration of
|
|
-- IP routing services at a global, device-wide level.
|
|
|
|
nwIpSysAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IP Routing Services
|
|
system-wide. Enabled(3) causes IP Routing Services to
|
|
become active on all router ports configured and enabled
|
|
for IP Routing Services. Disabled(2) causes IP Routing
|
|
Services to become inactive system-wide."
|
|
DEFVAL { enabled }
|
|
::= { nwIpSysAdministration 1 }
|
|
|
|
nwIpSysOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the operating condition of IP Routing Services, system-wide.
|
|
The value of nwIpSysOperStatus indicates any problem with
|
|
your IP Routing Services configuration. A value of 6
|
|
indicates that regardless of the value of
|
|
nwIpSysAdminStatus,IP Routing Services is not operating
|
|
because of an invalid configuration."
|
|
::= { nwIpSysAdministration 2 }
|
|
|
|
nwIpSysAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets IP Routing Services, system-wide. Reset (2)
|
|
forces a restart of IP Routing Services without a
|
|
graceful shutdown on any active router ports, without
|
|
affecting any other routing services."
|
|
DEFVAL { other }
|
|
::= { nwIpSysAdministration 3 }
|
|
|
|
nwIpSysOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwIpSysOperStatus has been in its current administrative
|
|
state."
|
|
::= { nwIpSysAdministration 4 }
|
|
|
|
nwIpSysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the IP Routing
|
|
Services firmware, in textual format."
|
|
::= { nwIpSysAdministration 5 }
|
|
|
|
|
|
|
|
-- IP System-wide Packet Forwarding Counters
|
|
-- This group contains the aggregate (device-wide) IP packet forwarding
|
|
-- counters. The byte counters include bytes for the network layer on
|
|
-- up, framing is not included.
|
|
|
|
nwIpFwdCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate
|
|
(system-wide) IP packet and byte counters. Enabled (3)
|
|
causes these counters to become active. Disabled (2)
|
|
causes these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpFwdCounters 1 }
|
|
|
|
nwIpFwdCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) IP packet and byte
|
|
counters. Reset (2) resets the IP aggregate counters to 0.
|
|
nwIpFwdCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpFwdCounters 2 }
|
|
|
|
nwIpFwdCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwIpFwdCtrAdminStatus has been in the current state."
|
|
::= { nwIpFwdCounters 3 }
|
|
|
|
nwIpFwdCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
received, system-wide, during nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 4 }
|
|
|
|
nwIpFwdCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
transmitted, system-wide, during nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 5 }
|
|
|
|
nwIpFwdCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
forwarded, system-wide, during nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 6 }
|
|
|
|
nwIpFwdCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
administratively filtered, system-wide, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 7 }
|
|
|
|
nwIpFwdCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
discarded, system-wide, during nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 8 }
|
|
|
|
nwIpFwdCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
discarded, system-wide, during nwIpFwdCtrOperationalTime,
|
|
because of addressing errors in the IP header."
|
|
::= { nwIpFwdCounters 9 }
|
|
|
|
nwIpFwdCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
discarded, system-wide, during nwIpFwdCtrOperationalTime,
|
|
because an invalid packet length is contained in the IP header."
|
|
::= { nwIpFwdCounters 10 }
|
|
|
|
nwIpFwdCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
discarded, system-wide, during nwIpFwdCtrOperationalTime,
|
|
because of an invalid IP header."
|
|
::= { nwIpFwdCounters 11 }
|
|
|
|
nwIpFwdCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that
|
|
have been received, system-wide, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 12 }
|
|
|
|
nwIpFwdCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that have
|
|
been transmitted, system-wide, during nwIpFwdOperationalTime."
|
|
::= { nwIpFwdCounters 13 }
|
|
|
|
nwIpFwdCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that
|
|
have been forwarded, system-wide, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 14 }
|
|
|
|
nwIpFwdCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets
|
|
that have been administratively filtered, system-wide,
|
|
during nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 15 }
|
|
|
|
nwIpFwdCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that
|
|
have been discarded, system-wide, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 16 }
|
|
|
|
nwIpFwdCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have
|
|
been successfully delivered to the local host, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 17 }
|
|
|
|
nwIpFwdCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
forwarded by the local host, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 18 }
|
|
|
|
nwIpFwdCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
discarded by the local host, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 19 }
|
|
|
|
nwIpFwdCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
received by the local host, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 20 }
|
|
|
|
nwIpFwdCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
transmitted by the local host, during
|
|
nwIpFwdCtrOperationalTime."
|
|
::= { nwIpFwdCounters 21 }
|
|
|
|
nwIpFwdCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that
|
|
have been discarded by the local host, during
|
|
nwIpFwdCtrOperationalTime, due to a lack of host resources."
|
|
::= { nwIpFwdCounters 22 }
|
|
|
|
|
|
-- IP Forwarding Interface Table
|
|
-- This table contains the managed objects used to set-up and configure
|
|
-- each router port.
|
|
|
|
nwIpFwdIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port.
|
|
This table is indexed by nwIpFwdIfIndex, which indicates
|
|
the value of MIB 2 ifindex which identifies the router
|
|
port for which each entry exists. "
|
|
::= { nwIpFwdIfConfig 1 }
|
|
|
|
nwIpFwdIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the IP Routing Services configuration
|
|
for the router port for which the entry exists."
|
|
INDEX { nwIpFwdIfIndex }
|
|
::= { nwIpFwdIfTable 1 }
|
|
|
|
NwIpFwdIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpFwdIfIndex INTEGER,
|
|
nwIpFwdIfAdminStatus INTEGER,
|
|
nwIpFwdIfOperStatus INTEGER,
|
|
nwIpFwdIfOperationalTime TimeTicks,
|
|
nwIpFwdIfControl INTEGER,
|
|
nwIpFwdIfMtu INTEGER,
|
|
nwIpFwdIfForwarding INTEGER,
|
|
nwIpFwdIfFrameType INTEGER,
|
|
nwIpFwdIfAclIdentifier INTEGER,
|
|
nwIpFwdIfAclStatus INTEGER,
|
|
nwIpFwdIfCacheControl INTEGER,
|
|
nwIpFwdIfCacheEntries Counter,
|
|
nwIpFwdIfCacheHits Counter,
|
|
nwIpFwdIfCacheMisses Counter
|
|
}
|
|
|
|
nwIpFwdIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port."
|
|
::= { nwIpFwdIfEntry 1 }
|
|
|
|
nwIpFwdIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
disabled(2), -- shut-down IP Routing Services,
|
|
enabled(3) -- start-up IP Routing Services
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IP Routing Services
|
|
on the router port for which the entry exists. Enabled (3)
|
|
causes IP Routing Services to become active. Disabled (2)
|
|
causes it to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpFwdIfEntry 2 }
|
|
|
|
nwIpFwdIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of
|
|
IP Routing Services on the router port for which the
|
|
entry exists. The value of nwIpFwdIfOperStatus indicates
|
|
any problem with the configuration of IP routing Services on
|
|
the router port. A value of 6 indicates that regardless of
|
|
the value of nwIpFwdIfAdminStatus, IP Routing Services is
|
|
not operating because of an invalid port-level configuration."
|
|
::= { nwIpFwdIfEntry 3 }
|
|
|
|
nwIpFwdIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwIpFwdIfOperStatus has been in its current state."
|
|
::= { nwIpFwdIfEntry 4 }
|
|
|
|
nwIpFwdIfControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
add(2),
|
|
delete(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the Cabletron
|
|
Routing Services protocol-specific MIBs. Setting this object
|
|
has no effect."
|
|
DEFVAL { add }
|
|
::= { nwIpFwdIfEntry 5 }
|
|
|
|
nwIpFwdIfMtu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Maximum Transmission Unit (MTU) for IP packets
|
|
on the router port for which the entry exists. This includes
|
|
the IP header and data, but does not include framing."
|
|
DEFVAL { 1500 }
|
|
::= { nwIpFwdIfEntry 6 }
|
|
|
|
|
|
nwIpFwdIfForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
disabled(2), -- not forwarding,
|
|
enabled(3) -- forwarding,
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls forwarding of IP packets on the router port for
|
|
which the entry exists. Enabled (3) causes IP packets to be
|
|
forwarded. Disabled (2) prevents IP packets from being
|
|
forwarded."
|
|
DEFVAL { disabled }
|
|
::= { nwIpFwdIfEntry 7 }
|
|
|
|
nwIpFwdIfFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- ethernet and fddi
|
|
slip(5), -- serial line
|
|
localtalk(7), -- internal SMB-1, read-only
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encaptrsnap(14), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special media, tbd
|
|
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type for IP packets forwarded on
|
|
the router port for which the entry exists."
|
|
DEFVAL { ethernet }
|
|
::= { nwIpFwdIfEntry 8 }
|
|
|
|
nwIpFwdIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the access control
|
|
list in effect for the IP packets being routed on the router port
|
|
for which the entry exists. A value of 0 indicates that no
|
|
access control list is in effect."
|
|
DEFVAL { 0 }
|
|
::= { nwIpFwdIfEntry 9 }
|
|
|
|
nwIpFwdIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- do not apply nwIpFwdIfAclIdentifier
|
|
enabled(3) -- apply nwIpFwdIfAclIdentifier
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of any access control list configured
|
|
for IP traffic for the IP packets being routed on the router port
|
|
for which the entry exists. Enabled (3) applies the access control
|
|
list, indicated by nwIpFwdIfAclIdentifier to all IP traffic being
|
|
routed on the port. Disabled (2) prevents the access control list
|
|
from being applied."
|
|
DEFVAL { disabled }
|
|
::= { nwIpFwdIfEntry 10 }
|
|
|
|
nwIpFwdIfCacheControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
disable(2), -- next hop caching disabled,
|
|
enable(3) -- next hop caching enabled,
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls IP Address caching on the router port for which
|
|
the entry exists. IP Address caching speeds-up the switching
|
|
process. When IP Addresses caching is enabled, IP Addresses
|
|
used for address validation, filtering, and forwarding are
|
|
stored in the cache. This cache is checked first before
|
|
doing a full route table lookup, which speeds up the switching
|
|
process. Enabled (3) turns on IP Address caching. Disabled (2
|
|
turns it off."
|
|
DEFVAL { enable }
|
|
::= { nwIpFwdIfEntry 11 }
|
|
|
|
nwIpFwdIfCacheEntries OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of entries in the IP Address
|
|
cache on the router port for which the entry exists."
|
|
::= { nwIpFwdIfEntry 12 }
|
|
|
|
nwIpFwdIfCacheHits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times entries in the IP
|
|
Address Cache have been used to provide the IP Address
|
|
required to validate, filter, or forward an IP packet
|
|
on the router port."
|
|
::= { nwIpFwdIfEntry 13 }
|
|
|
|
nwIpFwdIfCacheMisses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times the IP Address required to
|
|
validate, filter, or forward an IP packet on the router
|
|
port was not found in the IP Address cache."
|
|
::= { nwIpFwdIfEntry 14 }
|
|
|
|
|
|
-- The IP Interface Address Table
|
|
-- This table contains the managed object used to setup and configure
|
|
-- IP addresses on a per router port basis.
|
|
|
|
nwIpAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each IP Address
|
|
assigned to each router port."
|
|
::= { nwIpFwdIfConfig 2 }
|
|
|
|
nwIpAddrEntry OBJECT-TYPE
|
|
SYNTAX NwIpAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the IP addressing information for
|
|
the logical IP network for which the entry exists."
|
|
INDEX { nwIpAddrIfIndex, nwIpAddrIfAddress }
|
|
::= { nwIpAddressTable 1 }
|
|
|
|
NwIpAddrEntry ::=
|
|
SEQUENCE {
|
|
nwIpAddrIfIndex INTEGER,
|
|
nwIpAddrIfAddress IpAddress,
|
|
nwIpAddrIfControl INTEGER,
|
|
nwIpAddrIfAddrType INTEGER,
|
|
nwIpAddrIfMask IpAddress,
|
|
nwIpAddrIfBcastAddr INTEGER
|
|
}
|
|
|
|
nwIpAddrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
|
port for which the entry exists."
|
|
::= { nwIpAddrEntry 1 }
|
|
|
|
|
|
nwIpAddrIfAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the IP Address assigned to the logical IP
|
|
network for which the entry exist. As multiple IP Addresses
|
|
may be assigned to a single router port, all addresses
|
|
assigned to the port must be of the same subnet."
|
|
::= { nwIpAddrEntry 2 }
|
|
|
|
nwIpAddrIfControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
add(2), -- add this entry,
|
|
delete(3) -- delete this entry
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this object to add or delete this entry from the table."
|
|
DEFVAL { add }
|
|
::= { nwIpAddrEntry 3 }
|
|
|
|
nwIpAddrIfAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
primary(2),
|
|
secondary(3),
|
|
workgroup(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the IP address, nwIpAddrIfAddress, is
|
|
the primary, workgroup or secondary IP address for the IP router
|
|
port for which the entry exists. A primary or workgroup address
|
|
must be specified before a router port can be enabled."
|
|
DEFVAL { primary }
|
|
::= { nwIpAddrEntry 4 }
|
|
|
|
nwIpAddrIfMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Subnet Mask for the logical IP network for
|
|
which the entry exists."
|
|
::= { nwIpAddrEntry 5 }
|
|
|
|
nwIpAddrIfBcastAddr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
zeros(2),
|
|
ones(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the IP broadcast address type for the logical
|
|
IP network for which the entry exists. A router port may
|
|
be configured to send IP broadcasts using the all-ones-based
|
|
format or the all-zeros-based format. nwIpAddrIfBcastAddr
|
|
determines the value of the broadcast portion of the IP
|
|
broadcast address being used to address broadcast packets."
|
|
DEFVAL { ones }
|
|
::= { nwIpAddrEntry 6 }
|
|
|
|
-- IP Forwarding Interfaces Counter Table
|
|
-- This table contains the objects that specify the packet and byte counters
|
|
-- for each configured IP router port.
|
|
|
|
nwIpFwdIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port configured
|
|
and enabled for IP Routing Services."
|
|
::= { nwIpFwdIfCounters 1 }
|
|
|
|
nwIpFwdIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the packet and byte count of IP
|
|
packets on the router port for which the entry exists."
|
|
INDEX { nwIpFwdIfCtrIfIndex }
|
|
::= { nwIpFwdIfCtrTable 1 }
|
|
|
|
NwIpFwdIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpFwdIfCtrIfIndex INTEGER,
|
|
nwIpFwdIfCtrAdminStatus INTEGER,
|
|
nwIpFwdIfCtrReset INTEGER,
|
|
nwIpFwdIfCtrOperationalTime TimeTicks,
|
|
nwIpFwdIfCtrInPkts Counter,
|
|
nwIpFwdIfCtrOutPkts Counter,
|
|
nwIpFwdIfCtrFwdPkts Counter,
|
|
nwIpFwdIfCtrFilteredPkts Counter,
|
|
nwIpFwdIfCtrDiscardPkts Counter,
|
|
nwIpFwdIfCtrAddrErrPkts Counter,
|
|
nwIpFwdIfCtrLenErrPkts Counter,
|
|
nwIpFwdIfCtrHdrErrPkts Counter,
|
|
nwIpFwdIfCtrInBytes Counter,
|
|
nwIpFwdIfCtrOutBytes Counter,
|
|
nwIpFwdIfCtrFwdBytes Counter,
|
|
nwIpFwdIfCtrFilteredBytes Counter,
|
|
nwIpFwdIfCtrDiscardBytes Counter,
|
|
nwIpFwdIfCtrHostInPkts Counter,
|
|
nwIpFwdIfCtrHostOutPkts Counter,
|
|
nwIpFwdIfCtrHostDiscardPkts Counter,
|
|
nwIpFwdIfCtrHostInBytes Counter,
|
|
nwIpFwdIfCtrHostOutBytes Counter,
|
|
nwIpFwdIfCtrHostDiscardBytes Counter
|
|
}
|
|
|
|
nwIpFwdIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies the
|
|
router port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 1 }
|
|
|
|
nwIpFwdIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- counters off
|
|
enabled(3) -- counters on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port IP packet
|
|
and byte counters on the router port for which the entry
|
|
exists. Enabled (3) causes these counters to become active.
|
|
Disabled (2) causes these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpFwdIfCtrEntry 2 }
|
|
|
|
nwIpFwdIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port IP packet and byte counters on the
|
|
router port for which the entry exists. Reset (2) resets the
|
|
counters to 0. nwIpFwdIfCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpFwdIfCtrEntry 3 }
|
|
|
|
nwIpFwdIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
the per-port IP packet and byte counters have been active on
|
|
the router port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 4 }
|
|
|
|
nwIpFwdIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
received, during nwIpFwdIfCtrOperationaltime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 5 }
|
|
|
|
nwIpFwdIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have
|
|
been transmitted, during nwIpFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 6 }
|
|
|
|
nwIpFwdIfCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
forwarded during nwIpFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 7 }
|
|
|
|
nwIpFwdIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
administratively filtered, during
|
|
nwIpFwdIfCtrOperationalTime, on the IP router port for
|
|
which this entry exists."
|
|
::= { nwIpFwdIfCtrEntry 8 }
|
|
|
|
nwIpFwdIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have
|
|
been discarded (dropped), during nwIpFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 9 }
|
|
|
|
nwIpFwdIfCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
discarded, because of addressing errors in the IP header,
|
|
during nwIpFwdIfCtrOperationalTime, on the router port for
|
|
which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 10 }
|
|
|
|
nwIpFwdIfCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been discarded,
|
|
because an invalid packet length was contained in the IP header, during
|
|
nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 11 }
|
|
|
|
nwIpFwdIfCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been discarded,
|
|
because of an invalid IP header, during nwIpFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 12 }
|
|
|
|
nwIpFwdIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that have been
|
|
received, during nwIpFwdIfCtrOperationalTime, on the router port for
|
|
which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 13 }
|
|
|
|
nwIpFwdIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that have
|
|
been transmitted, during nwIpFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 14 }
|
|
|
|
nwIpFwdIfCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets
|
|
that have been forwarded, on the router port for which the
|
|
entry exists, during nwIpFwdIfCtrOperationalTime."
|
|
::= { nwIpFwdIfCtrEntry 15 }
|
|
|
|
nwIpFwdIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets
|
|
that have been administratively filtered, during
|
|
nwIpFwdIfCtrOperationalTime, on the IP router port for
|
|
which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 16 }
|
|
|
|
nwIpFwdIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that
|
|
have been discarded, during nwIpFwdIfCtrOperationalTime, on
|
|
the router port for which the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 17 }
|
|
|
|
nwIpFwdIfCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
successfully delivered to the local host, that were received
|
|
on the router port for which the entry exists, during
|
|
nwIpFwdIfCtrOperationalTime."
|
|
::= { nwIpFwdIfCtrEntry 18 }
|
|
|
|
nwIpFwdIfCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets that have been
|
|
transmitted by the local host, during
|
|
nwIpFwdIfCtrOperationalTime, on the router port for which the
|
|
entry exists."
|
|
::= { nwIpFwdIfCtrEntry 19 }
|
|
|
|
nwIpFwdIfCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of IP packets discarded by the
|
|
local host due to a lack of host resources, that were
|
|
received on the router port for which the entry exists,
|
|
during nwIpFwdIfCtrOperationalTime."
|
|
::= { nwIpFwdIfCtrEntry 20 }
|
|
|
|
nwIpFwdIfCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that
|
|
have been successfully delivered to the local host, that
|
|
were received on the router port for which the entry exists,
|
|
during nwIpFwdIfCtrOperationalTime. "
|
|
::= { nwIpFwdIfCtrEntry 21 }
|
|
|
|
nwIpFwdIfCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets that
|
|
have been transmitted by the local host, during
|
|
nwIpFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwIpFwdIfCtrEntry 22 }
|
|
|
|
nwIpFwdIfCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the IP packets
|
|
that have been discarded by the local host due to a lack
|
|
of host resources, that were received on the router port
|
|
for which the entry exists, during
|
|
nwIpFwdIfCtrOperationalTime."
|
|
::= { nwIpFwdIfCtrEntry 23 }
|
|
|
|
|
|
|
|
-- DistanceVector-based Protocols
|
|
-- This group contains the managed objects for RIP, IP DistanceVector based
|
|
-- routing.
|
|
|
|
-- IP RIP System Configuration Parameters
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the IP RIP DistanceVector based routing protocol.
|
|
|
|
nwIpRipAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the RIP routing
|
|
protocol system-wide. Enabled (3) causes RIP to become
|
|
active on all router ports configured and enabled for
|
|
IP Routing Services. Disabled (2) causes RIP to become
|
|
inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpRipConfig 1 }
|
|
|
|
nwIpRipOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running, invalid config.
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the RIP
|
|
routing protocol system-wide. The value of
|
|
nwIpRipOperStatus indicates any problem with your RIP
|
|
configuration. A value of 6 indicates that regardless
|
|
of the value of nwIpRipAdminStatus, RIP is not operating
|
|
because of an invalid configuration."
|
|
::= { nwIpRipConfig 2 }
|
|
|
|
nwIpRipAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the RIP routing protocol. Reset (2) forces a
|
|
system-wide restart of the protocol system-wide without
|
|
a graceful shutdown on any active router ports."
|
|
DEFVAL { other }
|
|
::= { nwIpRipConfig 3 }
|
|
|
|
nwIpRipOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpRipOperStatus, has been in its current state."
|
|
::= { nwIpRipConfig 4 }
|
|
|
|
nwIpRipVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the RIP routing
|
|
protocol firmware, in textual format."
|
|
::= { nwIpRipConfig 5 }
|
|
|
|
nwIpRipStackSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the stack size of the RIP routing protocol thread.
|
|
In order for a change of this value to take effect, the
|
|
protocol (nwIpRipAdminReset), IP Routing Services
|
|
(nwIpSysAdminReset), or the device running Routing Services
|
|
must be reset."
|
|
DEFVAL { 4096 }
|
|
::= { nwIpRipConfig 6 }
|
|
|
|
nwIpRipThreadPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time execution priority of the RIP
|
|
routing protocol thread. In order for a change of this
|
|
value to take effect, RIP (nwIpRipAdminReset), IP Routing
|
|
Services (nwIpAdminReset), or the device running Routing
|
|
Services must be reset."
|
|
DEFVAL { 127 }
|
|
::= { nwIpRipConfig 7 }
|
|
|
|
nwIpRipDatabaseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time maximum number of RIP entries that
|
|
can be held in the RIP route table."
|
|
DEFVAL { 2000 }
|
|
::= { nwIpRipConfig 8 }
|
|
|
|
nwIpRipAgeOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the amount of time, in seconds, that an inactive
|
|
route table entry will be allowed to remain in the RIP route
|
|
table before it is aged-out."
|
|
DEFVAL { 210 }
|
|
::= { nwIpRipConfig 9 }
|
|
|
|
nwIpRipHoldDown OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the amount of time (in seconds) to wait before
|
|
removing an entry from the route table, after receiving an
|
|
update indicating that the destination has become unreachable.
|
|
All routers exchanging RIP routing protocol information must
|
|
have the same hold down time. The time must be long enough
|
|
to allow all participating routers to receive the same update."
|
|
DEFVAL { 120 }
|
|
::= { nwIpRipConfig 10 }
|
|
|
|
|
|
-- IP RIP System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) IP RIP packet and
|
|
-- byte counters.
|
|
nwIpRipCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate (system-wide)
|
|
RIP routing protocol packet and byte counters. Enabled (3)
|
|
causes these counters to become active. Disabled (2) causes
|
|
these counters to become inactive."
|
|
DEFVAL { enabled }
|
|
::= { nwIpRipCounters 1 }
|
|
|
|
nwIpRipCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) RIP routing protocol
|
|
packet and byte counters. Reset (2) resets the RIP aggregate
|
|
counters to 0. nwIpRipCtrOperationalTime is also reset to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpRipCounters 2 }
|
|
|
|
nwIpRipCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
|
nwIpRipCtrAdminStatus has been in the current state."
|
|
::= { nwIpRipCounters 3 }
|
|
|
|
nwIpRipCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of RIP packets that have been
|
|
received, system-wide, during nwIpRipCtrOperationalTime."
|
|
::= { nwIpRipCounters 4 }
|
|
|
|
nwIpRipCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of RIP packets that have been
|
|
transmitted, system-wide, during nwIpRipCtrOperationalTime."
|
|
::= { nwIpRipCounters 5 }
|
|
|
|
nwIpRipCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of RIP packets that have been
|
|
administratively filtered, system-wide, during
|
|
nwIpRipCtrOperationalTime."
|
|
::= { nwIpRipCounters 6 }
|
|
|
|
nwIpRipCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of RIP packets that have been
|
|
discarded, system-wide, during nwIpRipCtrOperationalTime."
|
|
::= { nwIpRipCounters 7 }
|
|
|
|
nwIpRipCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the RIP packets that
|
|
have been received, system-wide, during
|
|
nwIpRipCtrOperationalTime."
|
|
::= { nwIpRipCounters 8 }
|
|
|
|
nwIpRipCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the RIP packets
|
|
that have been transmitted, system-wide, during
|
|
nwIpRipCtrOperationalTime."
|
|
::= { nwIpRipCounters 9 }
|
|
|
|
nwIpRipCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the RIP packets
|
|
that have been administratively filtered, system-wide,
|
|
during nwIpRipCtrOperationalTime."
|
|
::= { nwIpRipCounters 10 }
|
|
|
|
nwIpRipCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the RIP packets
|
|
that have been discarded, system-wide, during
|
|
nwIpRipCtrOperationalTime."
|
|
::= { nwIpRipCounters 11 }
|
|
|
|
|
|
|
|
-- IP RIP Interface Table
|
|
-- This table contains the managed objects used to setup and configure
|
|
-- RIP on a per router port basis.
|
|
nwIpRipIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpRipIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. Each
|
|
entry can contain different values, allowing the routing
|
|
protocol configuration to vary from router port to router
|
|
port. This table is indexed by nwIpRipIfIndex, which
|
|
indicates the value of MIB 2 ifindex, which identifies the
|
|
router port for which the entry exists."
|
|
::= { nwIpRipIfConfig 1 }
|
|
|
|
nwIpRipIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpRipIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the RIP routing protocol configuration
|
|
for the router port for which the entry exists."
|
|
INDEX { nwIpRipIfIndex }
|
|
::= { nwIpRipIfTable 1 }
|
|
|
|
NwIpRipIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpRipIfIndex INTEGER,
|
|
nwIpRipIfAdminStatus INTEGER,
|
|
nwIpRipIfOperStatus INTEGER,
|
|
nwIpRipIfOperationalTime TimeTicks,
|
|
nwIpRipIfVersion INTEGER,
|
|
nwIpRipIfAdvertisement INTEGER,
|
|
nwIpRipIfFloodDelay INTEGER,
|
|
nwIpRipIfRequestDelay INTEGER,
|
|
nwIpRipIfPriority INTEGER,
|
|
nwIpRipIfHelloTimer INTEGER,
|
|
nwIpRipIfSplitHorizon INTEGER,
|
|
nwIpRipIfPoisonReverse INTEGER,
|
|
nwIpRipIfSnooping INTEGER,
|
|
nwIpRipIfType INTEGER,
|
|
nwIpRipIfXmitCost INTEGER,
|
|
nwIpRipIfAclIdentifier INTEGER,
|
|
nwIpRipIfAclStatus INTEGER
|
|
}
|
|
|
|
nwIpRipIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies
|
|
the router port for which the entry exists."
|
|
::= { nwIpRipIfEntry 1 }
|
|
|
|
nwIpRipIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- RIP off
|
|
enabled(3) -- RIP on
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the RIP routing protocol
|
|
on the router port for which the entry exists. Enabled (3)
|
|
causes RIP to become active on the router port. Disabled (2)
|
|
causes RIP to become inactive on the router port."
|
|
DEFVAL { disabled }
|
|
::= { nwIpRipIfEntry 2 }
|
|
|
|
nwIpRipIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the RIP
|
|
routing protocol on the router port for which the entry
|
|
exists. The value of nwIpRipIfOperStatus indicates any problem
|
|
with your RIP configuration on the router port. A value of 6
|
|
indicates that regardless of the value of nwIpRipIfAdminStatus,
|
|
RIP is not operating on the port because of an invalid
|
|
configuration."
|
|
::= { nwIpRipIfEntry 3 }
|
|
|
|
nwIpRipIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
nwIpRipIfOperStatus, has been in its current state."
|
|
::= { nwIpRipIfEntry 4 }
|
|
|
|
nwIpRipIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the revision level of the RIP routing protocol
|
|
firmware on the router port for which the entry exists, in
|
|
textual format."
|
|
DEFVAL { 1 }
|
|
::= { nwIpRipIfEntry 5 }
|
|
|
|
nwIpRipIfAdvertisement OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the interval, in seconds, at which RIP advertises
|
|
the RIP route table on the router port for which the entry
|
|
exists."
|
|
DEFVAL { 30 }
|
|
::= { nwIpRipIfEntry 6 }
|
|
|
|
nwIpRipIfFloodDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the length of time, in seconds, that the RIP routing
|
|
protocol should wait after discovering that a directly
|
|
connected route has gone down, before flooding updates
|
|
(triggered updates) on the router port for which the entry
|
|
exists. A value of 0 specifies that if a directly connected
|
|
route goes down, updates should be sent immediately."
|
|
DEFVAL { 2 }
|
|
::= { nwIpRipIfEntry 7 }
|
|
|
|
nwIpRipIfRequestDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the length of time, in hundredths of a second, that
|
|
the RIP routing protocol should wait after receiving a
|
|
route request packet, before sending a response on the
|
|
router port for which the entry exists. A value of 0
|
|
specifies that if a route request packet is received on the
|
|
port, a response should be sent immediately."
|
|
DEFVAL { 0 }
|
|
::= { nwIpRipIfEntry 8 }
|
|
|
|
nwIpRipIfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a common
|
|
object, inherited from the MIB framework used to provide a
|
|
common management interface to all the Cabletron Routing
|
|
Services protocol-specific MIBs. Setting this object has no
|
|
effect."
|
|
DEFVAL { 1 }
|
|
::= { nwIpRipIfEntry 9 }
|
|
|
|
nwIpRipIfHelloTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interfaced to all the Cabletron
|
|
Routing Services protocol-specific MIBs. Setting this object
|
|
has no effect."
|
|
DEFVAL { 10 }
|
|
::= { nwIpRipIfEntry 10 }
|
|
|
|
nwIpRipIfSplitHorizon OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the operating condition of Split Horizon on the
|
|
router port for which the entry exists. When Split Horizon
|
|
is enabled, the RIP routing protocol keeps track of which
|
|
router port route information is received on, and prevents
|
|
information about a route form being sent back out the same
|
|
router port it was received on."
|
|
DEFVAL { enabled }
|
|
::= { nwIpRipIfEntry 11 }
|
|
|
|
nwIpRipIfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the operating condition of Poison Reverse on the
|
|
router port for which the entry exists. When Poison Reverse
|
|
is enabled, the RIP routing protocol advertises any downed
|
|
route as unreachable during the period of time that it must
|
|
wait before removing the route from the route table."
|
|
DEFVAL { disabled }
|
|
::= { nwIpRipIfEntry 12 }
|
|
|
|
nwIpRipIfSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- non-snooping mode
|
|
enabled(3) -- snooping mode
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of RIP Snooping on the router
|
|
port. When RIP Snooping is enabled the RIP routing protocol
|
|
operates in passive mode so that it receives route information,
|
|
builds and maintains a route table, but does not advertise the
|
|
route table or send updates on the router port for which the
|
|
entry exists."
|
|
DEFVAL { disabled }
|
|
::= { nwIpRipIfEntry 13 }
|
|
|
|
nwIpRipIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
bma(2), -- broadcast media access,
|
|
nbma(3) -- non-broadcast media access,
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the directly connected network segment
|
|
does or does not support broadcast media access. If broadcast
|
|
media access is supported, RIP advertisements are sent out one
|
|
broadcast packet per router port. If broadcast media is not
|
|
supported, RIP advertisements are sent directly to each
|
|
neighbor router access."
|
|
DEFVAL { bma }
|
|
::= { nwIpRipIfEntry 14 }
|
|
|
|
nwIpRipIfXmitCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the Cabletron
|
|
Routing Services protocol-specific MIBs. Setting this object
|
|
has no effect."
|
|
DEFVAL { 0 }
|
|
::= { nwIpRipIfEntry 15 }
|
|
|
|
nwIpRipIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the access control
|
|
list in effect for RIP routing protocol packets on the
|
|
router port for which the entry exists. A value of 0
|
|
indicates that there is no access control list in effect
|
|
for RIP routing protocol packets on the router port."
|
|
DEFVAL { 0 }
|
|
::= { nwIpRipIfEntry 16 }
|
|
|
|
nwIpRipIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the access control list
|
|
identified by nwIpRipIfAclIdentifier. Enabled (3) applies
|
|
the access control list to all RIP routing protocol packet
|
|
traffic on the router port for which the entry exists.
|
|
Disabled (2) prevents the access control list from being
|
|
applied."
|
|
DEFVAL { disabled }
|
|
::= { nwIpRipIfEntry 17 }
|
|
|
|
-- IP RIP Interface Counters Table
|
|
-- This table contains the managed objects for IP RIP packet and byte
|
|
-- counter on a per router port basis.
|
|
nwIpRipIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpRipIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port.This table
|
|
is indexed by nwIpRipIfCtrIfIndex which indicates the value
|
|
of MIB 2 ifindex, which identifies the router port for which
|
|
the entry exists."
|
|
::= { nwIpRipIfCounters 1 }
|
|
|
|
nwIpRipIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpRipIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count of
|
|
RIP routing protocol packets on the router port for which
|
|
the entry exists."
|
|
INDEX { nwIpRipIfCtrIfIndex }
|
|
::= { nwIpRipIfCtrTable 1 }
|
|
|
|
NwIpRipIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpRipIfCtrIfIndex INTEGER,
|
|
nwIpRipIfCtrAdminStatus INTEGER,
|
|
nwIpRipIfCtrReset INTEGER,
|
|
nwIpRipIfCtrOperationalTime TimeTicks,
|
|
nwIpRipIfCtrInPkts Counter,
|
|
nwIpRipIfCtrOutPkts Counter,
|
|
nwIpRipIfCtrFilteredPkts Counter,
|
|
nwIpRipIfCtrDiscardPkts Counter,
|
|
nwIpRipIfCtrInBytes Counter,
|
|
nwIpRipIfCtrOutBytes Counter,
|
|
nwIpRipIfCtrFilteredBytes Counter,
|
|
nwIpRipIfCtrDiscardBytes Counter
|
|
}
|
|
|
|
nwIpRipIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies
|
|
the router port for which the entry exists."
|
|
::= { nwIpRipIfCtrEntry 1 }
|
|
|
|
nwIpRipIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
disabled(2), -- counters off,
|
|
enabled(3) -- counters on,
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the RIP packet and byte
|
|
counters on the router port for which this entry exists.
|
|
Enabled (3) causes these counters to become active.
|
|
Disabled (2) causes these counters to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpRipIfCtrEntry 2 }
|
|
|
|
nwIpRipIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
reset(2) -- force a reset,
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port RIP packet and byte counters on the
|
|
router port for which this entry exists. Reset (2) resets
|
|
the counters to 0. nwIpRipIfCtrOperationalTime is also reset
|
|
to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpRipIfCtrEntry 3 }
|
|
|
|
nwIpRipIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwIpRipIfCtrAdminStatus has been in the current
|
|
state."
|
|
::= { nwIpRipIfCtrEntry 4 }
|
|
|
|
nwIpRipIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of RIP routing protocol packets
|
|
that have been received, during nwIpRipIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwIpRipIfCtrEntry 5 }
|
|
|
|
nwIpRipIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of RIP packets that have been
|
|
transmitted, during nwIpRipIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwIpRipIfCtrEntry 6 }
|
|
|
|
nwIpRipIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of RIP packets that have been
|
|
administratively filtered during nwIpRipIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwIpRipIfCtrEntry 7 }
|
|
|
|
nwIpRipIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of RIP routing protocol packets
|
|
that have been discarded, during nwIpRipIfCtrOperationalTime.
|
|
that were received through the router port for which the entry
|
|
exists."
|
|
::= { nwIpRipIfCtrEntry 8 }
|
|
|
|
nwIpRipIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the RIP routing
|
|
protocol packets that have been received, during
|
|
nwIpRipIfCtrOperationalTime, on the router port for which this
|
|
entry exists."
|
|
::= { nwIpRipIfCtrEntry 9 }
|
|
|
|
nwIpRipIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the RIP routing
|
|
protocol packets that have been transmitted, during
|
|
nwIpRipIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwIpRipIfCtrEntry 10 }
|
|
|
|
nwIpRipIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the RIP routing
|
|
protocol packets that have been administratively filtered,
|
|
during nwIpRipIfCtrOperationalTime, on the router port for
|
|
which the entry exists."
|
|
::= { nwIpRipIfCtrEntry 11 }
|
|
|
|
nwIpRipIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the RIP routing
|
|
protocol packets that have been discarded during
|
|
nwIpRipIfCtrOperationalTime, that were received on the
|
|
router port for which the entry exists."
|
|
::= { nwIpRipIfCtrEntry 12 }
|
|
|
|
|
|
|
|
-- IP RIP Routing Table
|
|
-- This table contains the managed objects for IP RIP route table.
|
|
nwIpRipRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpRipRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the RIP route table. This table contains
|
|
an entry for each route learned through the RIP routing
|
|
protocol. Only the best routes from this table are added to
|
|
the IP forwarding table to be used for packet switching."
|
|
::= { nwIpRipDatabase 1 }
|
|
|
|
nwIpRipRouteEntry OBJECT-TYPE
|
|
SYNTAX NwIpRipRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry describes the RIP route to the destination
|
|
network for which the entry exists."
|
|
INDEX { nwIpRipRtNetId, nwIpRipRtIfIndex, nwIpRipRtSrcNode}
|
|
::= { nwIpRipRouteTable 1 }
|
|
|
|
NwIpRipRouteEntry ::=
|
|
SEQUENCE {
|
|
nwIpRipRtNetId IpAddress,
|
|
nwIpRipRtIfIndex INTEGER,
|
|
nwIpRipRtSrcNode IpAddress,
|
|
nwIpRipRtMask IpAddress,
|
|
nwIpRipRtHops INTEGER,
|
|
nwIpRipRtAge TimeTicks,
|
|
nwIpRipRtType INTEGER,
|
|
nwIpRipRtFlags INTEGER
|
|
}
|
|
|
|
nwIpRipRtNetId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the RIP route table. This
|
|
number indicates the IP Address of the destination for which
|
|
the entry exists."
|
|
::= { nwIpRipRouteEntry 1 }
|
|
|
|
nwIpRipRtIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a secondary index into IP-RIP route table. This
|
|
number corresponds to the value of MIB 2 ifindex, which
|
|
identifies the router port for which the entry exists."
|
|
::= { nwIpRipRouteEntry 2 }
|
|
|
|
nwIpRipRtSrcNode OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a secondary index into the RIP route table. This
|
|
number indicates the IP Address of the source router from
|
|
which this route was learned. A value of 0.0.0.0 indicates
|
|
that the source is on the network segment directly connected
|
|
to the router port, nwIpRipRtIfIndex."
|
|
::= { nwIpRipRouteEntry 3 }
|
|
|
|
nwIpRipRtMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the Subnet Mask of the IP Address for
|
|
which the entry exists."
|
|
::= { nwIpRipRouteEntry 4 }
|
|
|
|
nwIpRipRtHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of hops required to reach the
|
|
destination for which the entry exists."
|
|
::= { nwIpRipRouteEntry 5 }
|
|
|
|
nwIpRipRtAge OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in seconds, since an update
|
|
has been received for the route for which the entry exists."
|
|
::= { nwIpRipRouteEntry 6 }
|
|
|
|
nwIpRipRtType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
invalid(2), -- not a valid route,
|
|
direct(3), -- directly connected,
|
|
remote(4), -- indirectly connected,
|
|
static(5), -- Learned from static routes
|
|
ospf(6) -- Learned from ospf routes
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the destination network is directly
|
|
connected through the router port specified by
|
|
nwIpRipRtIfIndex, or is indirectly connected through
|
|
another router, specified by nwIpRipRtSrcNode."
|
|
::= { nwIpRipRouteEntry 7 }
|
|
|
|
nwIpRipRtFlags OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies properties of the RIP route. The bit mask is
|
|
as follows: source-changed (1), best-source (2), local net (4),
|
|
net-down (8), update-fib-only (16)."
|
|
::= { nwIpRipRouteEntry 8 }
|
|
|
|
|
|
-- Link State-based Protocols
|
|
-- This group contains the managed objects for OSPF, IP Link State-based
|
|
-- based routing.
|
|
|
|
-- IP OSPF System Configuration Parameters
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the IP OSPF Link State-based routing protocol.
|
|
|
|
|
|
nwIpOspfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the OSPF routing
|
|
protocol. enabled(3) causes OSPF to become active
|
|
on any IP configured router ports. disabled(2) causes
|
|
OSPF to perform a graceful shutdown on any active IP
|
|
configured router ports."
|
|
DEFVAL { disabled }
|
|
::= { nwIpOspfConfig 1 }
|
|
|
|
nwIpOspfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of OSPF."
|
|
::= { nwIpOspfConfig 2 }
|
|
|
|
nwIpOspfAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets OSPF. reset(2) will force a restart of OSPF
|
|
on any active IP router ports, configured for OSPF,
|
|
without a graceful shutdown, without affecting any
|
|
other routing services."
|
|
DEFVAL { other }
|
|
::= { nwIpOspfConfig 3 }
|
|
|
|
nwIpOspfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time (#of time ticks) that OSPF
|
|
has been in its current operational state."
|
|
::= { nwIpOspfConfig 4 }
|
|
|
|
nwIpOspfVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current Cabletron revision level of OSPF
|
|
in textual format, not the OSPF version supported."
|
|
::= { nwIpOspfConfig 5 }
|
|
|
|
nwIpOspfStackSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the stack size for the OSPF thread. In order
|
|
for a change of this value to take effect, OSPF
|
|
(nwIpOspfAdminStatus), IP (nwIpSysAdminStatus), or the
|
|
device itself must be reset."
|
|
DEFVAL { 50000 }
|
|
::= { nwIpOspfConfig 6 }
|
|
|
|
nwIpOspfThreadPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time execution priority of the OSPF
|
|
protocol thread. In order for a change of this value to
|
|
take effect, OSPF or the IP routing services, or the
|
|
device must be reset."
|
|
DEFVAL { 127 }
|
|
::= { nwIpOspfConfig 7 }
|
|
|
|
|
|
-- IP OSPF System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) IP OSPF packet and
|
|
-- byte counters.
|
|
|
|
nwIpOspfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the operating condition of the aggregate
|
|
(device-wide) OSPF packet and byte counters. enable (3)
|
|
causes these counters to become active on any router ports
|
|
running OSPF. disabled (2) cause these counters to become
|
|
inactive on any router port running OSPF."
|
|
DEFVAL { enabled }
|
|
::= { nwIpOspfCounters 1 }
|
|
|
|
nwIpOspfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (device-wide) OSPF packet and byte
|
|
counters. reset(2) resets the aggregate OSPF counters to 0
|
|
and nwIpOspfCtrOperationalTime to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpOspfCounters 2 }
|
|
|
|
nwIpOspfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time (# of time ticks) that the
|
|
aggregate OSPF packet and byte counters have been active."
|
|
::= { nwIpOspfCounters 3 }
|
|
|
|
nwIpOspfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of OSPF packets that have been
|
|
received, device-wide, during nwIpOspfCtrOperationalTime."
|
|
::= { nwIpOspfCounters 4 }
|
|
|
|
nwIpOspfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of OSPF packets that have been
|
|
transmitted, device-wide, during nwIpOspfCtr-
|
|
Operational-Time."
|
|
::= { nwIpOspfCounters 5 }
|
|
|
|
nwIpOspfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of OSPF packets that have been
|
|
administratively filtered, device-wide, during
|
|
nwIpOspfCtrOperationalTime."
|
|
::= { nwIpOspfCounters 6 }
|
|
|
|
nwIpOspfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of OSPF packets that have been
|
|
discarded, device-wide, during nwIpOspfCtrOperationalTime."
|
|
::= { nwIpOspfCounters 7 }
|
|
|
|
nwIpOspfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the OSFP packets
|
|
that have been received, device-wide, during
|
|
nwIpOspfCtrOperationalTime."
|
|
::= { nwIpOspfCounters 8 }
|
|
|
|
nwIpOspfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the OSPF packets
|
|
that have been transmitted, device-wide, during
|
|
nwIpOspfCtrOperationalTime."
|
|
::= { nwIpOspfCounters 9 }
|
|
|
|
nwIpOspfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the OSPF packets
|
|
that have been administratively filtered, device-wide,
|
|
during nwIpOspfCtrOperationalTime."
|
|
::= { nwIpOspfCounters 10 }
|
|
|
|
nwIpOspfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the OSPF packets
|
|
that have been discarded, during
|
|
nwIpOspfCtrOperationalTime."
|
|
::= { nwIpOspfCounters 11 }
|
|
|
|
|
|
|
|
-- IP OSPF Interface Table
|
|
-- This group, as well as MIB-II OSPF, contains the managed objects used to
|
|
-- setup and configure OSPF on a per router port basis.
|
|
|
|
nwIpOspfIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpOspfIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the OSPF configuration information for
|
|
each IP router port"
|
|
::= { nwIpOspfIfConfig 1 }
|
|
|
|
nwIpOspfIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpOspfIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the OSPF configuration information
|
|
for the IP router port for which the entry exists."
|
|
INDEX { nwIpOspfIfIndex }
|
|
::= { nwIpOspfIfTable 1 }
|
|
|
|
NwIpOspfIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpOspfIfIndex INTEGER,
|
|
nwIpOspfIfAdminStatus INTEGER,
|
|
nwIpOspfIfOperStatus INTEGER,
|
|
nwIpOspfIfOperationalTime TimeTicks,
|
|
nwIpOspfIfVersion INTEGER,
|
|
nwIpOspfIfSnooping INTEGER,
|
|
nwIpOspfIfType INTEGER,
|
|
nwIpOspfIfAclIdentifier INTEGER,
|
|
nwIpOspfIfAclStatus INTEGER
|
|
}
|
|
|
|
nwIpOspfIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the OSPF interface table.
|
|
This number corresponds to the index into the MIB-2
|
|
Interface Table which describes the router port for
|
|
which the entry exists."
|
|
::= { nwIpOspfIfEntry 1 }
|
|
|
|
nwIpOspfIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of OSPF on the IP router
|
|
port for which the entry exists. enabled(3)
|
|
causes OSPF to become active on the router port.
|
|
disabled(2) causes OSPF to become inactive on the
|
|
router port."
|
|
DEFVAL { disabled }
|
|
::= { nwIpOspfIfEntry 2 }
|
|
|
|
nwIpOspfIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of OSPF on the IP
|
|
router port for which the entry exists. enabled(3)
|
|
causes OSPF to become active on the router port.
|
|
disabled(2) causes OSPF to become inactive on the
|
|
router port."
|
|
::= { nwIpOspfIfEntry 3 }
|
|
|
|
nwIpOspfIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwIpOspfIfAdminStatus has been in its current state."
|
|
::= { nwIpOspfIfEntry 4 }
|
|
|
|
nwIpOspfIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the OSPF protocol revision level supported on
|
|
the router port."
|
|
DEFVAL { 1 }
|
|
::= { nwIpOspfIfEntry 5 }
|
|
|
|
nwIpOspfIfSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of OSPF Snooping on the IP
|
|
router port for which the entry exists.OSPF
|
|
Snooping is operating OSPF in passive mode, so it receives
|
|
route information, builds and maintains a route
|
|
information table, but does not advertise. enable (3)
|
|
turns on OSPF Snooping. disable (2) turns it off."
|
|
DEFVAL { disabled }
|
|
::= { nwIpOspfIfEntry 6 }
|
|
|
|
nwIpOspfIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
bma(2),
|
|
nbma(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the attached network segment does or
|
|
does not support broadcast media access. bma (2) indicates
|
|
that route advertisements can be sent as broadcasts. nbma
|
|
(3) indicates that route advertisements must be addresses
|
|
directly to each neighbor."
|
|
DEFVAL { bma }
|
|
::= { nwIpOspfIfEntry 7 }
|
|
|
|
nwIpOspfIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control List ID of the access
|
|
control list applied to OSPF traffic on the IP router
|
|
port for which the entry exists. A value of
|
|
0 indicates that no Access List applies."
|
|
DEFVAL { 0 }
|
|
::= { nwIpOspfIfEntry 8 }
|
|
|
|
nwIpOspfIfAclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the access list configured for
|
|
OSPF traffic on the IP router port for which the entry exists.
|
|
enabled(3) causes the access list to be applied. disabled(2)
|
|
causes the access list not to be applied."
|
|
DEFVAL { disabled }
|
|
::= { nwIpOspfIfEntry 9 }
|
|
|
|
|
|
-- IP OSPF Interface Counters Table
|
|
-- This table contains the objects that specify the packet and byte counters
|
|
-- for each configured IP OSPF router port.
|
|
|
|
nwIpOspfIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpOspfIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the OSPF packet and byte counter for
|
|
each configured OSPF router port."
|
|
::= { nwIpOspfIfCounters 1 }
|
|
|
|
nwIpOspfIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwIpOspfIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the OSPF packet and byte counter for
|
|
for the router for which the entry exists."
|
|
INDEX { nwIpOspfIfCtrIfIndex }
|
|
::= { nwIpOspfIfCtrTable 1 }
|
|
|
|
NwIpOspfIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwIpOspfIfCtrIfIndex INTEGER,
|
|
nwIpOspfIfCtrAdminStatus INTEGER,
|
|
nwIpOspfIfCtrReset INTEGER,
|
|
nwIpOspfIfCtrOperationalTime TimeTicks,
|
|
nwIpOspfIfCtrInPkts Counter,
|
|
nwIpOspfIfCtrOutPkts Counter,
|
|
nwIpOspfIfCtrFilteredPkts Counter,
|
|
nwIpOspfIfCtrDiscardPkts Counter,
|
|
nwIpOspfIfCtrInBytes Counter,
|
|
nwIpOspfIfCtrOutBytes Counter,
|
|
nwIpOspfIfCtrFilteredBytes Counter,
|
|
nwIpOspfIfCtrDiscardBytes Counter
|
|
}
|
|
|
|
nwIpOspfIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the OSPF interface counter
|
|
table. This number corresponds to the index into the MIB-2
|
|
Interface Table which describes the router port for
|
|
which the entry exists."
|
|
::= { nwIpOspfIfCtrEntry 1 }
|
|
|
|
nwIpOspfIfCtrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the OSPF packet and byte
|
|
counters on the IP router port for which
|
|
the entry exists. enabled(3) causes these counters to
|
|
become active on the router port. disabled(2) turns these
|
|
counters off."
|
|
DEFVAL { enabled }
|
|
::= { nwIpOspfIfCtrEntry 2 }
|
|
|
|
nwIpOspfIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the OSPF packet and byte counters on the router port
|
|
for which the entry exists. reset (2) resets the
|
|
interface-specific counters to 0 and
|
|
nwIpOspfIfCtrOperationalTime to 0."
|
|
DEFVAL { other }
|
|
::= { nwIpOspfIfCtrEntry 3 }
|
|
|
|
nwIpOspfIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time (# of time ticks) that the
|
|
interface-specific OSPF packet and byte counters have
|
|
been active on the router port for which the entry
|
|
exists."
|
|
::= { nwIpOspfIfCtrEntry 4 }
|
|
|
|
nwIpOspfIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of OSPF packets that have been
|
|
received, on the router port for which the entry exists,
|
|
during nwIpOspfIfCtrOperationalTime."
|
|
::= { nwIpOspfIfCtrEntry 5 }
|
|
|
|
nwIpOspfIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of OSPF packets that have been
|
|
transmitted, on the router port for which the entry exists,
|
|
during nwIpOspfIfCtrOperationalTime."
|
|
::= { nwIpOspfIfCtrEntry 6 }
|
|
|
|
nwIpOspfIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of OSPF packets that have been
|
|
administratively filtered, on the router port for which
|
|
the entry exists, during nwIpOspfIfCtrOperationalTime."
|
|
::= { nwIpOspfIfCtrEntry 7 }
|
|
|
|
nwIpOspfIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of OSPF packets that have been
|
|
discarded, on the router port for which the entry exists,
|
|
during nwIpOspfIfCtrOperationalTime."
|
|
::= { nwIpOspfIfCtrEntry 8 }
|
|
|
|
nwIpOspfIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the OSPF packets
|
|
that have been received, on the router port for
|
|
which the entry exists, during
|
|
nwIpOspfIfCtrOperationalTime."
|
|
::= { nwIpOspfIfCtrEntry 9 }
|
|
|
|
nwIpOspfIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the OSPF packets
|
|
that have been transmitted, on the router port for which the
|
|
entry exists, during nwIpOspfIfCtrOperationalTime."
|
|
::= { nwIpOspfIfCtrEntry 10 }
|
|
|
|
nwIpOspfIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the OSPF packets
|
|
that have been administratively filtered, on the
|
|
router port for which the entry exists, during
|
|
nwIpOspfIfCtrOperationalTime"
|
|
::= { nwIpOspfIfCtrEntry 11 }
|
|
|
|
nwIpOspfIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the OSPF packets
|
|
that have been discarded, on the router port for which the
|
|
entry exists, during nwIpOspfIfCtrOperationalTime."
|
|
::= { nwIpOspfIfCtrEntry 12 }
|
|
|
|
|
|
-- IP Forward Information Base (FIB) System Group
|
|
|
|
-- The nwIpFibSystem group provides a way to prioritize static routes or
|
|
-- routes learned from RIP or OSPF. Note, the IETF IP Forwarding Table
|
|
-- leaf ipForwardProto maps the value (3) netmgmt and (2) local to
|
|
-- staticRoutePriority. Lets say the FIB table holds two routes to the
|
|
-- same destination. If the first route has leaf ipForwardProto equal to
|
|
-- (3), a static route set by mgmnt, and the second route has say (13),
|
|
-- an OSPF route, then the static route will be the one taken in a next
|
|
-- hop lookup in the FIB, because static routes have higher priority than
|
|
-- OSPF routes. The following leafs are necessary because metrics cannot
|
|
-- be compared across routes from different sources.
|
|
|
|
nwIpRipRoutePriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the route priority assigned to routes learned by the
|
|
RIP routing protocol."
|
|
DEFVAL { 16 }
|
|
::= { nwIpFibSystem 1 }
|
|
|
|
nwIpOSPFRoutePriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the route priority assigned to routes learned by the
|
|
OSPF routing protocol."
|
|
DEFVAL { 32 }
|
|
::= { nwIpFibSystem 2 }
|
|
|
|
nwIpStaticRoutePriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the route priority assigned to routes learned by
|
|
statically configured routes.."
|
|
DEFVAL { 48 }
|
|
::= { nwIpFibSystem 3 }
|
|
|
|
-- The Cabletron IP OSPF FIB control group
|
|
-- A list of objects controlling or identifying the number of entries
|
|
-- in the Cabletron IP OSPF FIB.
|
|
|
|
nwIpOspfForward OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of valid Cabletron IP OSPF FIB entries to
|
|
include static, dynamic, RIP and BGP4 type routes."
|
|
::= { nwIpOspfFibControl 1 }
|
|
|
|
nwIpOspfLeakAllStaticRoutes OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (2), -- do not leak all static routes
|
|
enabled (1) -- leak all static routes
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add all static routes in the IP FIB to the Cabletron IP OSPF FIB for
|
|
advertisement in OSPF routing protocol announcements."
|
|
::= { nwIpOspfFibControl 2 }
|
|
|
|
nwIpOspfLeakAllRipRoutes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add all RIP routes in the IP FIB to the Cabletron IP OSPF FIB for
|
|
advertisement in OSPF routing protocol announcements."
|
|
::= { nwIpOspfFibControl 3 }
|
|
|
|
nwIpOspfLeakAllBgp4Routes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add all BGP4 routes in the IP FIB to the Cabletron IP OSPF FIB for
|
|
advertisement in OSPF routing protocol announcements."
|
|
::= { nwIpOspfFibControl 4 }
|
|
|
|
|
|
-- Cabletron IP OSPF FIB entries
|
|
|
|
nwIpOspfStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpOspfStaticEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of statically configured entries in the Cabletron IP OSPF
|
|
FIB."
|
|
::= { nwIpOspfFibEntries 1 }
|
|
|
|
nwIpOspfStaticEntry OBJECT-TYPE
|
|
SYNTAX NwIpOspfStaticEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of information for each static entry in the Cabletron
|
|
IP OSPF FIB."
|
|
INDEX { nwIpOspfStaticDest, nwIpOspfStaticForwardMask, nwIpOspfStaticNextHop }
|
|
::= { nwIpOspfStaticTable 1 }
|
|
|
|
NwIpOspfStaticEntry ::=
|
|
SEQUENCE {
|
|
nwIpOspfStaticDest IpAddress,
|
|
nwIpOspfStaticForwardMask IpAddress,
|
|
nwIpOspfStaticNextHop IpAddress,
|
|
nwIpOspfStaticMetric INTEGER,
|
|
nwIpOspfStaticMetricType INTEGER,
|
|
nwIpOspfStaticStatus INTEGER
|
|
}
|
|
|
|
nwIpOspfStaticDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The network Address of a static route leaked from the IP FIB into the
|
|
Cabletron IP OSPF FIB."
|
|
::= { nwIpOspfStaticEntry 1 }
|
|
|
|
nwIpOspfStaticForwardMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The network mask of a static route leaked from the IP FIB into the
|
|
Cabletron IP OSPF FIB."
|
|
::= { nwIpOspfStaticEntry 2 }
|
|
|
|
nwIpOspfStaticNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The next hop address of a static route leaked from the IP FIB into the
|
|
Cabletron IP OSPF FIB. A value of 0.0.0.0 indicates that packets for
|
|
the external destination should be forwarded to the
|
|
advertising router."
|
|
::= { nwIpOspfStaticEntry 3 }
|
|
|
|
nwIpOspfStaticMetric OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Cabletron IP OSPF advertised cost of reaching the leaked static
|
|
route."
|
|
::= { nwIpOspfStaticEntry 4 }
|
|
|
|
nwIpOspfStaticMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Cabletron IP OSPF metric type to be advertised using
|
|
OSPF: Autonomous System External type 1 (1) or Autonomous System
|
|
External type 2 (2)."
|
|
::= { nwIpOspfStaticEntry 5 }
|
|
|
|
nwIpOspfStaticStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive (1), -- add the static route to the IP OSPF FIB
|
|
active (2), -- add and advertise the static route to the IP OSPF FIB
|
|
delete (3) -- delete the static route from the IP OSPF FIB
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"By setting this OID to inactive for a particular static route, the static
|
|
route will be added to the IP OSPF FIB but not advertised. Setting this
|
|
OID to active for a particular static route, the static route will be
|
|
advertised by the OSPF router. By setting this OID to delete for a
|
|
particular static route, the entry will no longer be advertised using
|
|
OSPF and will be deleted from the IP OSPF FIB."
|
|
::= { nwIpOspfStaticEntry 6 }
|
|
|
|
|
|
nwIpOspfDynamicTable OBJECT IDENTIFIER
|
|
-- SYNTAX SEQUENCE OF NwIpOspfDynamicEntry
|
|
-- ACCESS not-accessible
|
|
-- STATUS optional
|
|
-- DESCRIPTION
|
|
-- "The Cabletron IP OSPF FIB Dynamic entry table."
|
|
-- INDEX { nwIpOspfDynamicDest }
|
|
::= { nwIpOspfFibEntries 2 }
|
|
|
|
|
|
nwIpOspfRipTable OBJECT IDENTIFIER
|
|
-- SYNTAX SEQUENCE OF NwIpOspfRipEntry
|
|
-- ACCESS not-accessible
|
|
-- STATUS optional
|
|
-- DESCRIPTION
|
|
-- "The Cabletron IP OSPF FIB RIP entry table."
|
|
-- INDEX { nwIpOspfRipDest }
|
|
::= { nwIpOspfFibEntries 3 }
|
|
|
|
|
|
nwIpOspfBgp4Table OBJECT IDENTIFIER
|
|
-- SYNTAX SEQUENCE OF NwIpOspfBgp4Entry
|
|
-- ACCESS not-accessible
|
|
-- STATUS optional
|
|
-- DESCRIPTION
|
|
-- "The Cabletron IP OSPF FIB BGP4 entry table."
|
|
-- INDEX { nwIpOspfBgp4Dest }
|
|
::= { nwIpOspfFibEntries 4 }
|
|
|
|
|
|
-- IP Host Systems Group
|
|
|
|
nwIpHostsTimeToLive OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time (number of minutes) that an entry
|
|
can remain in the ARP cache."
|
|
::= { nwIpHostsSystem 1 }
|
|
|
|
nwIpHostsRetryCount OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the maximum number of times IP Routing Services
|
|
will retry each attempt to resolve a host address."
|
|
::= { nwIpHostsSystem 2 }
|
|
|
|
|
|
-- IP Host Interfaces Table
|
|
-- This table contains the objects that specify the control information for
|
|
-- maintaining the ARP cache (IP Net-to-Media Table).
|
|
|
|
nwIpHostCtlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpHostCtlEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the control information for maintaining
|
|
a cache of IP host addresses on each router port. Note that
|
|
the of actual entries are maintained by the IP Address
|
|
Translation Table (Net-to-Media) of MIB 2."
|
|
::= { nwIpHostsInterfaces 1 }
|
|
|
|
nwIpHostCtlEntry OBJECT-TYPE
|
|
SYNTAX NwIpHostCtlEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the control information for
|
|
maintaining the cache on each router port."
|
|
INDEX { nwIpHostCtlIfIndex }
|
|
::= { nwIpHostCtlTable 1 }
|
|
|
|
|
|
NwIpHostCtlEntry ::=
|
|
SEQUENCE {
|
|
nwIpHostCtlIfIndex INTEGER,
|
|
nwIpHostCtlAdminStatus INTEGER,
|
|
nwIpHostCtlOperStatus INTEGER,
|
|
nwIpHostCtlOperationalTime TimeTicks,
|
|
nwIpHostCtlProtocol INTEGER,
|
|
nwIpHostCtlSnooping INTEGER,
|
|
nwIpHostCtlProxy INTEGER,
|
|
nwIpHostCtlCacheMax INTEGER,
|
|
nwIpHostCtlCacheSize INTEGER,
|
|
nwIpHostCtlNumStatics Counter,
|
|
nwIpHostCtlNumDynamics Counter,
|
|
nwIpHostCtlCacheHits Counter,
|
|
nwIpHostCtlCacheMisses Counter
|
|
}
|
|
|
|
nwIpHostCtlIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies
|
|
the router port for which the entry exists."
|
|
::= { nwIpHostCtlEntry 1 }
|
|
|
|
nwIpHostCtlAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the Cabletron
|
|
Routing Services protocol specific MIBS. Setting this object
|
|
has no effect."
|
|
DEFVAL { enable }
|
|
::= { nwIpHostCtlEntry 2 }
|
|
|
|
nwIpHostCtlOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the
|
|
IP Host Address cache on the router port for which the
|
|
entry exists."
|
|
::= { nwIpHostCtlEntry 3 }
|
|
|
|
nwIpHostCtlOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwIpHostCtlOperStatus has been in the current state."
|
|
::= { nwIpHostCtlEntry 4 }
|
|
|
|
nwIpHostCtlProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the ARP protocol on the router
|
|
port for which the entry exists."
|
|
DEFVAL { enable }
|
|
::= { nwIpHostCtlEntry 5 }
|
|
|
|
nwIpHostCtlSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls ARP Snooping on the router port for which
|
|
the entry exists. Given the ARP protocol is enabled,
|
|
nwIpHostCtlProtocol=3, setting nwIpHostCtlIfSnooping to
|
|
enabled (3) turns on ARP Snooping. When ARP Snooping is
|
|
enabled the source IP and physical addresses of all ARP
|
|
packets received on the router port are added to the MIB 2
|
|
Net-to-Media Table."
|
|
DEFVAL { disable }
|
|
::= { nwIpHostCtlEntry 6 }
|
|
|
|
nwIpHostCtlProxy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operations of Proxy ARP on the router port
|
|
for which the entry exists. Given the ARP protocol is
|
|
enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlProxy to
|
|
enabled (3) turns on Proxy ARP. When Proxy ARP is enabled on
|
|
a router port, and an ARP request is received, requesting the
|
|
address for an IP host whose network address is listed on the
|
|
IP route table, then IP Routing Services sends a Proxy ARP
|
|
response, with the physical address of the receiving router
|
|
port in place of the requested host's physical address. Based
|
|
on this proxy response, the requesting host will then forward
|
|
packets to the router port, and IP Routing Services will then
|
|
forward them to the correct destination."
|
|
DEFVAL { disable }
|
|
::= { nwIpHostCtlEntry 7 }
|
|
|
|
nwIpHostCtlCacheMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the maximum number of entry slots the cache
|
|
can consist of. nwIpHostCtlCacheMax cannot be set to less
|
|
than 16. Setting this value does not allocate any memory for
|
|
the cache."
|
|
DEFVAL { 1024 }
|
|
::= { nwIpHostCtlEntry 8 }
|
|
|
|
|
|
nwIpHostCtlCacheSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current number of entry slots in the cache.
|
|
The cache automatically resizes to accommodate all entries
|
|
up to the maximum number of entries set by
|
|
nwIpHostCtlCacheMax."
|
|
::= { nwIpHostCtlEntry 9 }
|
|
|
|
nwIpHostCtlNumStatics OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of static entries in the cache
|
|
on the router port for which the entry exists. Static entries
|
|
remain in the cache until they are administratively removed."
|
|
::= { nwIpHostCtlEntry 10 }
|
|
|
|
nwIpHostCtlNumDynamics OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of dynamic entries in the cache on
|
|
the router port for which the entry exists. Dynamic entries
|
|
area added and aged out by the ARP protocol."
|
|
::= { nwIpHostCtlEntry 11 }
|
|
|
|
nwIpHostCtlCacheHits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times an entry in the cache has
|
|
been used to successfully provide the physical address
|
|
required to forward an IP packet on the router port for
|
|
which the entry exists."
|
|
::= { nwIpHostCtlEntry 12 }
|
|
|
|
nwIpHostCtlCacheMisses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times the physical address
|
|
required to forward an IP packet has not been found in
|
|
the cache on the router port for which the entry exists."
|
|
::= { nwIpHostCtlEntry 13 }
|
|
|
|
|
|
-- IP Hosts-to-Media Table
|
|
-- This table serves to supplement the MIB-2 Net-To-Media Table. It
|
|
-- supports both non-WAN interfaces and logical WAN interfaces and the
|
|
-- circuits under them. In addition to the ifIndex, IpAddress, and
|
|
-- PhysAddress mapping, each address translation includes the framing
|
|
-- required to converse with the host, the platform's logical port number,
|
|
-- and the circuit identifier associated with the mapping if applicable.
|
|
|
|
|
|
nwIpHostMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Ip Address translation table used for mapping an IP
|
|
address to physical address, framing, port and circuit
|
|
identifier, if applicable."
|
|
::= { nwIpHostsToMedia 1 }
|
|
|
|
nwIpHostMapEntry OBJECT-TYPE
|
|
SYNTAX NwIpHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains one IpAddress to 'physical'
|
|
address equivalence, including a circuit identifier
|
|
if applicable. Also provided is the framing and
|
|
port number required to converse with this host."
|
|
INDEX { nwIpHostMapIfIndex, nwIpHostMapIpAddr }
|
|
::= { nwIpHostMapTable 1 }
|
|
|
|
NwIpHostMapEntry ::=
|
|
SEQUENCE {
|
|
nwIpHostMapIfIndex INTEGER,
|
|
nwIpHostMapIpAddr IpAddress,
|
|
nwIpHostMapPhysAddr PhysAddress,
|
|
nwIpHostMapType INTEGER,
|
|
nwIpHostMapCircuitID INTEGER,
|
|
nwIpHostMapFraming INTEGER,
|
|
nwIpHostMapPortNumber INTEGER
|
|
}
|
|
|
|
nwIpHostMapIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the HostMap
|
|
table. This number corresponds to the index into the
|
|
MIB-2 Interfaces Group which describes the IP router
|
|
port for which the entry exists."
|
|
::= { nwIpHostMapEntry 1 }
|
|
|
|
|
|
nwIpHostMapIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IpAddress corresponding to the media-dependent
|
|
'physical' address and circuit identifier (if applic)."
|
|
::= { nwIpHostMapEntry 2 }
|
|
|
|
|
|
nwIpHostMapPhysAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The media-dependent 'physical' address. The value of
|
|
this object is 0 for entries indicating native-wan(8)
|
|
framing."
|
|
::= { nwIpHostMapEntry 3 }
|
|
|
|
nwIpHostMapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
dynamic(3),
|
|
static(4),
|
|
inactive(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to the value invalid(2) has
|
|
the effect of invalidating the corresponding entry
|
|
in the nwIpHostMapTable. That is, it effectively
|
|
dissasociates the circuit identified with said
|
|
entry from the mapping identified with said entry.
|
|
It is an implementation-specific matter as to
|
|
whether the agent removes an invalidated entry
|
|
from the table. Accordingly, management stations
|
|
must be prepared to receive tabular information
|
|
from agents that corresponds to entries not
|
|
currently in use. Proper interpretation of such
|
|
entries requires examination of the relevant
|
|
nwIpHostMapType object."
|
|
|
|
::= { nwIpHostMapEntry 4 }
|
|
|
|
nwIpHostMapCircuitID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The identifier for the virtual circuit present on the
|
|
interface. On an interface configured for Frame Relay,
|
|
this number is the DLCI for the IP Address at the end of
|
|
the circuit. For non-WAN interfaces, the value of this
|
|
object is zero."
|
|
::= { nwIpHostMapEntry 5 }
|
|
|
|
nwIpHostMapFraming OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- ethernet and fddi
|
|
slip(5), -- serial line
|
|
localtalk(7), -- internal SMB-1 only
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encaptrsnap(14), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special media, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type required to converse with the
|
|
host for which this entry exists."
|
|
::= { nwIpHostMapEntry 6 }
|
|
|
|
nwIpHostMapPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value for the logical port number. It's value
|
|
ranges between 1 and a maximum value which is dependent on
|
|
both the number of interfaces in the system and the number
|
|
of circuits present on interfaces which are of WAN type."
|
|
::= { nwIpHostMapEntry 7 }
|
|
|
|
|
|
-- IP Access Control List Table
|
|
|
|
-- Implementation of the nwIpAccessControl group is optional. This group
|
|
-- will be implemented for devices that provide Routing Services.
|
|
-- This table contains the managed objects for the Access Control Lists
|
|
-- within the IP Router. Access Control Lists allow configuration of
|
|
-- restricted access to networks and protocols reachable thru the IP
|
|
-- Router device. Access Control Lists can be defined with these
|
|
-- objects and then be independently applied to IP forwarding router ports.
|
|
|
|
nwIpAclValidEntries OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of valid entries that exist in the
|
|
access control list table."
|
|
::= { nwIpAccessControl 1 }
|
|
|
|
nwIpAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the access control list information
|
|
for IP traffic. This table contains entries, each of which
|
|
allows packet forwarding between source/destination pairs to
|
|
be permitted or denied. The list is identified by the Access
|
|
Control List ID. Each list may contain multiple entries
|
|
ordered by sequence number. When an access control list is
|
|
searched, it is searched in sequence number order and the
|
|
first match found ends the search. If no match is found,
|
|
access defaults to permitted."
|
|
::= { nwIpAccessControl 2 }
|
|
|
|
nwIpAclEntry OBJECT-TYPE
|
|
SYNTAX NwIpAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains IP source/destination access information."
|
|
INDEX { nwIpAclIdentifier, nwIpAclSequence }
|
|
::= { nwIpAclTable 1 }
|
|
|
|
NwIpAclEntry ::=
|
|
SEQUENCE {
|
|
nwIpAclIdentifier INTEGER,
|
|
nwIpAclSequence INTEGER,
|
|
nwIpAclPermission INTEGER,
|
|
nwIpAclMatches Counter,
|
|
nwIpAclDestAddress IpAddress,
|
|
nwIpAclDestMask IpAddress,
|
|
nwIpAclSrcAddress IpAddress,
|
|
nwIpAclSrcMask IpAddress,
|
|
nwIpAclProtocol INTEGER,
|
|
nwIpAclPortNumber INTEGER
|
|
|
|
}
|
|
|
|
nwIpAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the IP access
|
|
control list table. This value identifies the access control
|
|
list by a unique identifier arbitrarily assigned by the user.
|
|
All entries that have the same value for nwIpAclIdentifier
|
|
belong to the same access control list."
|
|
::= { nwIpAclEntry 1 }
|
|
|
|
nwIpAclSequence OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the secondary (minor) index into the IP access
|
|
control list table. This number corresponds to a sequence
|
|
number used to order multiple entries within the same access
|
|
control list."
|
|
::= { nwIpAclEntry 2 }
|
|
|
|
nwIpAclPermission OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permit(3),
|
|
deny(4),
|
|
permit-bidirectional(5),
|
|
deny-bidirectional(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether access is allowed or denied between
|
|
the source and destination address pair. Note that source
|
|
and destination are interchangeable when bi-directional
|
|
control is selected. To remove an existing entry set
|
|
nwIpAclPermission to invalid (2). Invalid entries disappear
|
|
after reboot."
|
|
DEFVAL { permit }
|
|
::= { nwIpAclEntry 3 }
|
|
|
|
nwIpAclMatches OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of matches on this entry that have
|
|
resulted in the permit/deny access restriction being
|
|
applied as part of the forwarding process."
|
|
::= { nwIpAclEntry 4 }
|
|
|
|
nwIpAclDestAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the destination IP address used to compare
|
|
for matches on the access control list."
|
|
::= { nwIpAclEntry 5 }
|
|
|
|
nwIpAclDestMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the mask to be applied to the destination address
|
|
to determine the portion of the address used to compare for
|
|
matches on the access control list. Only bits that are
|
|
matching are used in the comparison. This allows for
|
|
wild-carding and partial matching."
|
|
::= { nwIpAclEntry 6 }
|
|
|
|
nwIpAclSrcAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the source address used to compare for
|
|
matches on the access control list."
|
|
::= { nwIpAclEntry 7 }
|
|
|
|
nwIpAclSrcMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the mask to be applied to the source address
|
|
to determine the portion of the address to be used to compare
|
|
for matches on the access control list. Only bits that are
|
|
matching are used in the comparison. This allows for
|
|
wild-carding and partial matching."
|
|
::= { nwIpAclEntry 8 }
|
|
|
|
nwIpAclProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
all(2), -- all ip packets
|
|
icmp(3), -- icmp packets only
|
|
udp(4), -- udp packets only
|
|
tcp(5) -- tcp packets only
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the IP protocols checked to compare for matches
|
|
on the access control list."
|
|
DEFVAL { all }
|
|
::= { nwIpAclEntry 9 }
|
|
|
|
nwIpAclPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the port number used to compare for matches on
|
|
the access control list. nwIpAclPortNumber only applies
|
|
if nwIpAclProtocol is equal to 4 or 5, UDP or TCP
|
|
nwIpAclPortNumber ranges from 0 to 65536. The value 0 is
|
|
a wildcard which matches any port."
|
|
::= { nwIpAclEntry 10 }
|
|
|
|
|
|
-- IP Redirector Table
|
|
|
|
-- The Redirector allows UDP broadcast packets that would normally be
|
|
-- discarded by the Router to be forwarded (or redirected) to a
|
|
-- specific (non-broadcast) IP address.
|
|
|
|
nwIpRedirectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpRedirectEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each UDP port configured
|
|
for UDP broadcast redirection."
|
|
::= { nwIpRedirectorSystem 1 }
|
|
|
|
nwIpRedirectEntry OBJECT-TYPE
|
|
SYNTAX NwIpRedirectEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the UDP port number of and IP Address
|
|
to which UDP packets received as LAN broadcasts, should be
|
|
redirected."
|
|
INDEX { nwIpRedirectPort }
|
|
::= { nwIpRedirectTable 1 }
|
|
|
|
NwIpRedirectEntry ::=
|
|
SEQUENCE {
|
|
nwIpRedirectPort INTEGER,
|
|
nwIpRedirectAddress IpAddress,
|
|
nwIpRedirectType INTEGER,
|
|
nwIpRedirectCount Counter
|
|
}
|
|
|
|
nwIpRedirectPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the UDP redirector table,
|
|
identifying the UDP port number of the packets that will
|
|
be redirected."
|
|
::= { nwIpRedirectEntry 1 }
|
|
|
|
nwIpRedirectAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the IP address to which the UDP broadcast packets
|
|
matching the UDP redirect port value (nwIpRedirectPort)
|
|
will be forwarded."
|
|
::= { nwIpRedirectEntry 2 }
|
|
|
|
nwIpRedirectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forward(1),
|
|
delete(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this object to enable or disable the redirector
|
|
feature for the UDP port specified by nwIpRedirectAddress."
|
|
DEFVAL { forward }
|
|
::= { nwIpRedirectEntry 3 }
|
|
|
|
nwIpRedirectCount OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates how many UDP broadcast packets have been
|
|
redirected, as specified by this entry."
|
|
::= { nwIpRedirectEntry 4 }
|
|
|
|
|
|
-- IP Event Group
|
|
|
|
nwIpEventAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IP event logging.
|
|
enabled(3) causes the event log to become active.
|
|
disabled(2) causes the event log to become inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwIpEventLogConfig 1 }
|
|
|
|
nwIpEventMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of IP event logging.
|
|
Enabled (3) causes the event log to become active.
|
|
Disabled (2) causes the event log to become inactive."
|
|
DEFVAL { 100 }
|
|
::= { nwIpEventLogConfig 2 }
|
|
|
|
nwIpEventTraceAll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following,
|
|
disabled(2), -- disable IP event logging,
|
|
enabled(3) -- enable IP event logging
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabled (3) allows logging of all event types on all
|
|
router ports for all protocols and components.
|
|
Disabled (2) causes the filter table to specify which events
|
|
to log."
|
|
DEFVAL { enabled }
|
|
::= { nwIpEventLogConfig 3 }
|
|
|
|
|
|
-- Event Log Filter Table
|
|
-- The Event Log Filter Table contains the managed objects used to set-up
|
|
-- and configure log entries.
|
|
|
|
nwIpEventFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each event filter
|
|
configured for IP Routing Services events."
|
|
::= { nwIpEventLogFilterTable 1 }
|
|
|
|
nwIpEventFilterEntry OBJECT-TYPE
|
|
SYNTAX NwIpEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry describes an event filter which defines
|
|
a particular type of event to be logged to the event log.
|
|
The value of nwIpEventProtocol indicates the value used
|
|
in either the nwRtgProtocolTable or the nwComponentTable
|
|
in the Cabletron Routing Services MIB, which identifies
|
|
the protocol to which the entry exists."
|
|
INDEX { nwIpEventFltrProtocol, nwIpEventFltrIfNum }
|
|
::= { nwIpEventFilterTable 1 }
|
|
|
|
NwIpEventFilterEntry ::=
|
|
SEQUENCE {
|
|
nwIpEventFltrProtocol INTEGER,
|
|
nwIpEventFltrIfNum INTEGER,
|
|
nwIpEventFltrControl INTEGER,
|
|
nwIpEventFltrType INTEGER,
|
|
nwIpEventFltrSeverity INTEGER,
|
|
nwIpEventFltrAction INTEGER
|
|
}
|
|
|
|
nwIpEventFltrProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the Cabletron Routing Services
|
|
MIB nwRtgProtocolInstance or nwComponentRtgInstance
|
|
which identifies the protocol involved in the event for
|
|
which the event filter exists."
|
|
::= { nwIpEventFilterEntry 1 }
|
|
|
|
nwIpEventFltrIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the router port involved in the event for
|
|
which the event filter exists."
|
|
::= { nwIpEventFilterEntry 2 }
|
|
|
|
nwIpEventFltrControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2),
|
|
add(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this value to 3 to add the entry to the event
|
|
filter table. Set this value to 2 to remove the entry
|
|
from the event filter table."
|
|
DEFVAL { add }
|
|
::= { nwIpEventFilterEntry 3 }
|
|
|
|
nwIpEventFltrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
diags(32),
|
|
error(64)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This 6 bit mask specifies the types of events to
|
|
be logged. By default all 6 bits are set to 1,
|
|
indicating that all types of events are to be logged.
|
|
Setting any bit to 0 removes an event type from this field
|
|
and prevents that type of event from being logged.Setting
|
|
any bit to 1 adds an event type to this field and enables
|
|
that type of event to be logged. "
|
|
DEFVAL { error }
|
|
::= { nwIpEventFilterEntry 4 }
|
|
|
|
nwIpEventFltrSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the level of severity an event must meet
|
|
in order to be logged. Controls the amount of event
|
|
logging by ignoring events of a lower priority than
|
|
specified by this filter value. `Highmed' ignores only
|
|
events of the lowest severity. `Highlow' logs all events
|
|
highest priority through lowest. `Highest' severity causes
|
|
all events except those of the highest severity to be
|
|
ignored. `Highmed' severity is the default setting which
|
|
causes only events of the lowest severity to be ignored.
|
|
`Highlow' severity logs all events, regardless of severity."
|
|
DEFVAL { highest }
|
|
::= { nwIpEventFilterEntry 5 }
|
|
|
|
nwIpEventFltrAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
log(1),
|
|
trap(2),
|
|
log-trap(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies how the events are to be logged. Logging to the
|
|
`log' stores the events in the event log table
|
|
(nwIpEventFltrAction). Logging to `trap' sends events out
|
|
through the trap mechanism."
|
|
DEFVAL { log }
|
|
::= { nwIpEventFilterEntry 6 }
|
|
|
|
-- Event Log Table
|
|
-- The Event Log Table contains the logged events.
|
|
|
|
nwIpEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each event that has
|
|
been logged."
|
|
::= { nwIpEventLogTable 1 }
|
|
|
|
nwIpEventEntry OBJECT-TYPE
|
|
SYNTAX NwIpEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the information about an event
|
|
that has been logged to the event table."
|
|
INDEX { nwIpEventNumber }
|
|
::= { nwIpEventTable 1 }
|
|
|
|
NwIpEventEntry ::=
|
|
SEQUENCE {
|
|
nwIpEventNumber INTEGER,
|
|
nwIpEventTime TimeTicks,
|
|
nwIpEventType INTEGER,
|
|
nwIpEventSeverity INTEGER,
|
|
nwIpEventProtocol INTEGER,
|
|
nwIpEventIfNum INTEGER,
|
|
nwIpEventTextString OCTET STRING
|
|
}
|
|
|
|
nwIpEventNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An ordinal value assigned to the event for which the
|
|
log entry exists. nwIpEventNumber is assigned so that
|
|
each event in the event log can be uniquely identified
|
|
by the value of nwIpEventNumber."
|
|
::= { nwIpEventEntry 1 }
|
|
|
|
nwIpEventTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the time at which the event was logged to
|
|
the event log."
|
|
::= { nwIpEventEntry 2 }
|
|
|
|
nwIpEventType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
diags(32),
|
|
error(64)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the type of event that was logged."
|
|
::= { nwIpEventEntry 3 }
|
|
|
|
nwIpEventSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the severity that was assigned to the event."
|
|
::= { nwIpEventEntry 4 }
|
|
|
|
nwIpEventProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the Cabletron Routing Services
|
|
MIB nwRtgProtocolInstance or nwComponentInstance which
|
|
indentifies the protocol or component that was involved
|
|
in the event."
|
|
::= { nwIpEventEntry 5 }
|
|
|
|
nwIpEventIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the router port that was involved in the event."
|
|
::= { nwIpEventEntry 6 }
|
|
|
|
nwIpEventTextString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the actual text string that was logged."
|
|
::= { nwIpEventEntry 7 }
|
|
|
|
|
|
|
|
-- IP Work Group Group
|
|
|
|
-- This group contains the managed objects used to setup and configure the
|
|
-- IP router ports into associations known as workgroups. Each workgroup is
|
|
-- a subnet with one address and security level shared by the associated ports.
|
|
|
|
-- This group consists of four tables. The first three are configuration
|
|
-- tables and the fourth is a read-only status table:
|
|
|
|
-- Definition Table = entry defines a workgroup;
|
|
-- Interface Table = entry associates an interface (port) to a workgroup;
|
|
-- Range Table = entry locks a range of host addresses to a port
|
|
-- if the entry range is a single host address
|
|
-- it may also lock that host to a given physical address
|
|
-- Host Table = entry indicates a discovered host on the discovered port
|
|
-- with its discovered physical address
|
|
|
|
|
|
-- This group makes use of a Rowstatus textual convention.
|
|
|
|
-- Rowstatus is a status object used to administrate conceptual rows in the
|
|
-- IP Work Group tables defined below.
|
|
|
|
-- It is an integer used here in an SNMPv1 MIB but intended to have the same
|
|
-- semantics as the RowStatus textual convention for SNMPv2.
|
|
|
|
-- SYNTAX INTEGER {
|
|
-- active(1),
|
|
-- notInService(2),
|
|
-- notReady(3),
|
|
-- createAndGo(4),
|
|
-- createAndWait(5),
|
|
-- destroy(6)
|
|
-- }
|
|
-- DESCRIPTION
|
|
-- "Rowstatus is used to manage the creation and deletion of conceptual
|
|
-- rows, and is used as the value of the SYNTAX clause for the status
|
|
-- column of the row.
|
|
|
|
-- The status column has six defined values:
|
|
|
|
-- active = usable by the managed device;
|
|
-- notInService = unusable, row information complete;
|
|
-- notReady = unusable, row incomplete;
|
|
-- createAndGo = set to create a row in active status;
|
|
-- createAndWait = set to create a row in either
|
|
-- notReady or notInService status;
|
|
-- destroy = set to delete existing row;
|
|
|
|
-- The first three values are states which may be retrieved by a
|
|
-- management protocol get operation. The last three values are
|
|
-- actions - they may be written but not read. All values except
|
|
-- `notReady' may be specified in a set operation. For example
|
|
-- to temporarily disable a row, set status to `notInService' and
|
|
-- reactivate it later by a set to `active.' The agent alone
|
|
-- determines `notReady' status. If a row is created by a set of
|
|
-- `createAndWait' and the agent has enough row information from
|
|
-- instance and default values to complete the row, the status
|
|
-- will be set to `notInService' else to `notReady'."
|
|
--
|
|
|
|
|
|
|
|
|
|
-- IP Work Group Definition Table
|
|
-- to define a workgroup
|
|
|
|
nwIpWgDefTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpWgDefEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table has an entry for each workgroup subnet definition.
|
|
It is indexed by and arbitrary integer indentifier."
|
|
::= { nwIpWorkGroup 1 }
|
|
|
|
nwIpWgDefEntry OBJECT-TYPE
|
|
SYNTAX NwIpWgDefEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the configuration and status of an
|
|
individual work group."
|
|
INDEX { nwIpWgDefIdentifier }
|
|
::= { nwIpWgDefTable 1 }
|
|
|
|
NwIpWgDefEntry ::=
|
|
SEQUENCE {
|
|
nwIpWgDefIdentifier INTEGER,
|
|
nwIpWgDefHostAddress IpAddress,
|
|
nwIpWgDefSubnetMask IpAddress,
|
|
nwIpWgDefSecurity INTEGER,
|
|
nwIpWgDefFastPath INTEGER,
|
|
nwIpWgDefRowStatus INTEGER,
|
|
nwIpWgDefOperStatus INTEGER,
|
|
nwIpWgDefNumActiveIntf INTEGER,
|
|
nwIpWgDefNumTotalIntf INTEGER
|
|
}
|
|
|
|
nwIpWgDefIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index into the definition table, unique to each entry,
|
|
arbitrarily assigned by the user."
|
|
::= { nwIpWgDefEntry 1 }
|
|
|
|
|
|
nwIpWgDefHostAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of the IP router host which applies to every
|
|
interface included in the workgroup."
|
|
::= { nwIpWgDefEntry 2 }
|
|
|
|
|
|
nwIpWgDefSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subnet mask for the IP address above, thereby defining
|
|
the subnet which applies to every interface included in the
|
|
workgroup."
|
|
::= { nwIpWgDefEntry 3 }
|
|
|
|
nwIpWgDefSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
low(2),
|
|
medium(3),
|
|
high(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A security level which applies to this workgroup as a whole.
|
|
Security applies in conjunction with the range table below,
|
|
which locks hosts to interfaces and/or physical address.
|
|
Packets are filtered out if security is violated.
|
|
|
|
For a high (4) security workgroup, a host must reside on the
|
|
interface and with the physical address configured in a range
|
|
table entry. For medium (3) security a host must reside on a
|
|
configured interface, but unless a physical address is also
|
|
specified in that range entry, the physical address is not
|
|
constrained. For low (2) security a host is free to reside
|
|
on any interface with any physical address if not configured
|
|
in the range table, but if configured must match a configured
|
|
entry. If security is none (1) the range table does not apply."
|
|
DEFVAL { low }
|
|
::= { nwIpWgDefEntry 4 }
|
|
|
|
|
|
nwIpWgDefFastPath OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabled (3) provides a fast path for packets through the
|
|
router when both source and destination are within this
|
|
workgroup - done mostly by skipping IP header validation."
|
|
DEFVAL { enabled }
|
|
::= { nwIpWgDefEntry 5 }
|
|
|
|
|
|
nwIpWgDefRowStatus OBJECT-TYPE
|
|
-- SYNTAX Rowstatus textual convention above
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notInService(2),
|
|
notReady(3),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This status instance does not support `createAndGo.'
|
|
A row entry should be created by a set of `createAndWait'
|
|
which brings the status to `notReady.' The missing row info
|
|
may then be supplied by setting nwIpWgDefHostAddr and
|
|
nwIpWgDefSubnetMask. If defaults are OK for nwIpWgDefFastPath
|
|
and nwIpWgDefSecurity this status instance may then be set to
|
|
`active' to activate the row."
|
|
DEFVAL { notReady }
|
|
::= { nwIpWgDefEntry 6 }
|
|
|
|
|
|
nwIpWgDefOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
disabled(2),
|
|
subnetConflict(3),
|
|
internalError(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The operational status of this workgroup definition entry.
|
|
It will be `disabled' if this entry's row status is not active.
|
|
It will be `subnetConflict' if there is a conflict with an
|
|
existing active entry in this workgroup definition table."
|
|
::= { nwIpWgDefEntry 7 }
|
|
|
|
|
|
nwIpWgDefNumActiveIntf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of interfaces (ports) in this workgroup which
|
|
have an operational status nwIpWgIfOperStatus of `OK' in the
|
|
IP Work Group Interface table below."
|
|
::= { nwIpWgDefEntry 8 }
|
|
|
|
|
|
nwIpWgDefNumTotalIntf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of interfaces (ports) in this workgroup which
|
|
have an administrative status nwIpWgIfRowStatus of `active'
|
|
in the IP Work Group Interface table below."
|
|
::= { nwIpWgDefEntry 9 }
|
|
|
|
|
|
-- IP Work Group Interface Table
|
|
-- to associate an interface (port) to a workgroup
|
|
|
|
nwIpWgIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpWgIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each port in a workgroup.
|
|
It is indexed by the workgroup identifier and the MIB-II
|
|
interface indentifier."
|
|
::= { nwIpWorkGroup 2 }
|
|
|
|
nwIpWgIfEntry OBJECT-TYPE
|
|
SYNTAX NwIpWgIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the association of a router port to
|
|
a defined workgroup."
|
|
INDEX { nwIpWgIfDefIdent, nwIpWgIfIfIndex }
|
|
::= { nwIpWgIfTable 1 }
|
|
|
|
NwIpWgIfEntry ::=
|
|
SEQUENCE {
|
|
nwIpWgIfDefIdent INTEGER,
|
|
nwIpWgIfIfIndex INTEGER,
|
|
nwIpWgIfNumActiveHosts INTEGER,
|
|
nwIpWgIfNumKnownHosts Counter,
|
|
nwIpWgIfRowStatus INTEGER,
|
|
nwIpWgIfOperStatus INTEGER
|
|
}
|
|
|
|
nwIpWgIfDefIdent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The workgroup identifier. This is the primary index into
|
|
the IP Work Group Interface Table, matching the index into
|
|
the Definition Table above."
|
|
::= { nwIpWgIfEntry 1 }
|
|
|
|
|
|
nwIpWgIfIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface number. This is the secondary index into the
|
|
IP Work Group Interface Table, matching the primary index
|
|
into the MIB-2 IfTable which describes the router port."
|
|
::= { nwIpWgIfEntry 2 }
|
|
|
|
|
|
nwIpWgIfNumActiveHosts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of hosts known to be active on this interface in
|
|
this workgroup. These hosts are visible in the IP Work Group
|
|
Host Table below. Hosts age out and become inactive in
|
|
approximately 10 minutes if not rediscovered thrugh ARP."
|
|
::= { nwIpWgIfEntry 3 }
|
|
|
|
|
|
nwIpWgIfNumKnownHosts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of hosts seen on this interface in this workgroup
|
|
since this interface entry was last activated."
|
|
::= { nwIpWgIfEntry 4 }
|
|
|
|
|
|
nwIpWgIfRowStatus OBJECT-TYPE
|
|
-- SYNTAX Rowstatus textual convention above
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notInService(2),
|
|
notReady(3),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This status instance supports `createAndGo' semantics
|
|
to create an active entry."
|
|
DEFVAL { notInService }
|
|
::= { nwIpWgIfEntry 5 }
|
|
|
|
|
|
|
|
nwIpWgIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
disabled(2),
|
|
workgroupInvalid(3),
|
|
addressConflict(4),
|
|
resetRequired(5),
|
|
linkDown(6),
|
|
routingDown(7),
|
|
internalError(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The operational status of this interface (port) entry.
|
|
It will be `disabled' if this entry's row status is not active.
|
|
It will be `workgroupInvalid' if either there is no workgroup
|
|
defined for this entry's nwIpWgIfDefIdent or if the operational
|
|
status for the workgroup in the definition table is not ok.
|
|
It will be `addressConflict' if an entry in nwIpAddressTable
|
|
is a conflict with the workgroup address of the definition.
|
|
If there is no conflict and this entry's row status has just
|
|
been activated, this operational status will be `resetRequired'.
|
|
It will be `linkDown' if there are no physical connections on
|
|
this interface and `routingDown' if routing or forwarding has
|
|
been adminstratively disabled. If unspecified internal problems
|
|
occur the status will be `internalError'."
|
|
::= { nwIpWgIfEntry 6 }
|
|
|
|
|
|
|
|
|
|
-- IP Router Work Group Range Table
|
|
-- to lock host ranges to an interface
|
|
-- and optionally lock to a physical address
|
|
|
|
|
|
nwIpWgRngTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpWgRngEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table locks ranges of IP hosts (addresses) to ports.
|
|
Entries in this table represent explicit permissions. The
|
|
host(s) represented by a range entry may exchange packets
|
|
with this router if it (they) match the port specified in the
|
|
entry. Optionally physical address may be locked as well.
|
|
|
|
This table functions in concert with the workgroup security
|
|
level as defined in the IP Work Group Definition Table entry.
|
|
For hosts not entered in this table the default for a low
|
|
security workgroup is to permit packet exchange, whereas the
|
|
default for medium and high security is to deny packet
|
|
exchange."
|
|
|
|
::= { nwIpWorkGroup 3 }
|
|
|
|
nwIpWgRngEntry OBJECT-TYPE
|
|
SYNTAX NwIpWgRngEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry configures a range of host IP addresses to be
|
|
associated with a given interface ( port ). If the range
|
|
consists of a single host address the entry may optionally
|
|
specify a physical address. The entry is indexed by the range
|
|
and the port. Ranges may not overlap. However a range may be
|
|
duplicated on different ports.
|
|
|
|
The address range must lie within the subnet defined for a
|
|
given workgroup and thus the entry acquires the security
|
|
level of that workgroup. If security is violated, packets
|
|
to and from a given host IP address will be filtered out
|
|
passing through the router. The source and destination IP
|
|
packet addresses are checked against ranges in the range table
|
|
during packet forwarding and must match as follows:
|
|
|
|
For a high (4) security workgroup, a host must match a single
|
|
host range entry - it must reside on the port with the
|
|
physical address as configured in that entry.
|
|
|
|
For a medium (3) security workgroup, a host must match a range
|
|
entry in that it resides on that port, but unless a physical
|
|
address is also specified in that entry, the physical address
|
|
is not constrained.
|
|
|
|
For a low (2) security workgroup, a host is free to reside on
|
|
any port with any physical address as long as its IP address
|
|
does not lie within the range of any entry in the range table,
|
|
but if it does fall in a range then it must completely match
|
|
that entry, or another entry with the duplicate range. Match
|
|
completely means match the port and, if a physical address
|
|
is specified, match that as well."
|
|
|
|
INDEX { nwIpWgRngBegHostAddr, nwIpWgRngEndHostAddr, nwIpWgRngIfIndex }
|
|
::= { nwIpWgRngTable 1 }
|
|
|
|
NwIpWgRngEntry ::=
|
|
SEQUENCE {
|
|
nwIpWgRngBegHostAddr IpAddress,
|
|
nwIpWgRngEndHostAddr IpAddress,
|
|
nwIpWgRngIfIndex INTEGER,
|
|
-- nwIpWgRngDefIdent INTEGER,
|
|
nwIpWgRngPhysAddr OCTET STRING,
|
|
nwIpWgRngRowStatus INTEGER,
|
|
nwIpWgRngOperStatus INTEGER
|
|
}
|
|
|
|
|
|
nwIpWgRngBegHostAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The beginning (lower) IP address of the address range.
|
|
This is the primary index into the IP Work Group Range Table."
|
|
::= { nwIpWgRngEntry 1 }
|
|
|
|
|
|
nwIpWgRngEndHostAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ending (higher) IP address of the address range.
|
|
This is the secondary index of the IP Work Group Range Table."
|
|
::= { nwIpWgRngEntry 2 }
|
|
|
|
|
|
nwIpWgRngIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface number. This is the tertiary index into the
|
|
IP Work Group Interface Table, matching the primary index
|
|
into the MIB-2 IfTable which describes the router port."
|
|
::= { nwIpWgRngEntry 3 }
|
|
|
|
|
|
nwIpWgRngPhysAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The physical address of the host with the IP address given
|
|
in the nwIpWgRngBegHostAddr for this conceptual row entry.
|
|
Only single host range entry in which nwIpWgRngEndHostAddr is
|
|
the same as nwIpWgRngBegHostAddr may set a physical address."
|
|
DEFVAL { '000000000000'h }
|
|
::= { nwIpWgRngEntry 4 }
|
|
|
|
|
|
nwIpWgRngRowStatus OBJECT-TYPE
|
|
-- SYNTAX Rowstatus textual convention above
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notInService(2),
|
|
notReady(3),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This status instance supports `createAndGo' semantics
|
|
to create an active entry."
|
|
DEFVAL { notInService }
|
|
::= { nwIpWgRngEntry 5 }
|
|
|
|
|
|
nwIpWgRngOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
disabled(2),
|
|
workgroupInvalid(3),
|
|
interfaceInvalid(4),
|
|
physAddrRequired(5),
|
|
internalError(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The operational status of this range table entry.
|
|
It will be `disabled' if this entry's row status is not active.
|
|
It will be `workgroupInvalid' if either there is no workgroup
|
|
or if the operational status for the workgroup in the definition
|
|
table associated with this address range is not ok.
|
|
It will be `interfaceInvalid' if this interface is not in
|
|
the workgroup interface table or if operational status of the
|
|
interface entry is not ok. It will be `physAddrRequired' if
|
|
the security level of the associated workgroup is high and
|
|
no physical address has been specified for this entry."
|
|
::= { nwIpWgRngEntry 6 }
|
|
|
|
|
|
|
|
-- IP Work Group Host Table
|
|
-- to show status of hosts in workgroups
|
|
|
|
nwIpWgHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwIpWgHostEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A read only status table for hosts in workgroups.
|
|
It has the information similar to a net-to-media table."
|
|
::= { nwIpWorkGroup 4 }
|
|
|
|
nwIpWgHostEntry OBJECT-TYPE
|
|
SYNTAX NwIpWgHostEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry shows a workgroup host. Entry is indexed by
|
|
IP address and interface (port). It gives the workgroup
|
|
and the physical address found for the host."
|
|
INDEX { nwIpWgHostHostAddr, nwIpWgHostIfIndex }
|
|
::= { nwIpWgHostTable 1 }
|
|
|
|
NwIpWgHostEntry ::=
|
|
SEQUENCE {
|
|
nwIpWgHostHostAddr IpAddress,
|
|
nwIpWgHostIfIndex INTEGER,
|
|
nwIpWgHostDefIdent INTEGER,
|
|
nwIpWgHostPhysAddr OCTET STRING,
|
|
nwIpWgHostStatus INTEGER
|
|
}
|
|
|
|
|
|
nwIpWgHostHostAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The host IP address. This is the primary index to the
|
|
IP Work Group Host Table."
|
|
::= { nwIpWgHostEntry 1 }
|
|
|
|
|
|
nwIpWgHostIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface (port) number. This is the secondary index
|
|
to the IP Work Group Host Table, matching the primary index
|
|
to the MIB-2 IfTable which describes the router port."
|
|
::= { nwIpWgHostEntry 2 }
|
|
|
|
|
|
nwIpWgHostDefIdent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The workgroup identifier. This corresponds to the primary
|
|
index into the IP Work Group Interface Table."
|
|
::= { nwIpWgHostEntry 3 }
|
|
|
|
|
|
nwIpWgHostPhysAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The physical address of the host with the IP address given
|
|
in the nwIpWgHostHostAddr for this conceptual row entry."
|
|
::= { nwIpWgHostEntry 4 }
|
|
|
|
|
|
nwIpWgHostStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
unknown(2),
|
|
valid(3),
|
|
invalid-multiple(4),
|
|
invalid-physaddr(5),
|
|
invalid-range(6),
|
|
invalid-interface(7),
|
|
invalid-workgroup(8),
|
|
invalid-expired(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This status of the host with respect to the workgroup.
|
|
|
|
The host may be `unknown' if ARP has not discovered on which
|
|
port it resides.
|
|
|
|
The status of `invalid-multiple' means the same host
|
|
IP address was later found duplicated on another port.
|
|
|
|
The status of `invalid-physaddr' means the host matched an
|
|
entry in the IP Work Group Range Table with respect to range
|
|
and port, but did not match that entry for physical address.
|
|
If the workgroup was high security this status would result
|
|
even if no physical address was given in the range entry.
|
|
|
|
The status of `invalid-range' could either mean that, in a high
|
|
or medium security workgroup, the host was not in the range of
|
|
any entry in the IP WORK GROUP Range Table, or that it was not
|
|
in the range of an entry with a matching port.
|
|
|
|
The status of `invalid-interface' could mean the port was
|
|
physically down or just not in service in the IP Work Group
|
|
Interface Table.
|
|
|
|
The status of `invalid-workgroup' could mean the workgroup
|
|
does not exist or is not in service in the IP Work Group
|
|
Definition Table.
|
|
|
|
The status of `invalid-expired' means the host became inactive
|
|
and aged out on the port on which it was learned."
|
|
|
|
::= { nwIpWgHostEntry 5 }
|
|
|
|
END
|