graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/cisco/CISCOSB-SSH-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1165 lines
42 KiB
Text
Raw Blame History

CISCOSB-SSH-MIB DEFINITIONS ::= BEGIN
-- Title: CISCOSB PHY MIB
-- Version: 7.45
-- Date: 19 Dec 2006
--
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY,
Unsigned32, IpAddress FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus
FROM SNMPv2-TC
switch001 FROM CISCOSB-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB;
rlSsh MODULE-IDENTITY
LAST-UPDATED "202105170000Z" -- September 30, 2002
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The MIB module describes the private MIB for SSH supported
by CISCOSB's software and products."
REVISION "200301030024Z" -- January 04, 2003
DESCRIPTION
"The second revision"
REVISION "200309210024Z" -- September 21, 2003
DESCRIPTION
"Editorial changes."
::= { switch001 78 }
--
-- Textual Conventions
--
RlSshPublicKeyAlgorithm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention describes the various possible public key
algorithms. The key algorithm is used to select the PK to be generated
and is also used when viewing the public keys."
SYNTAX INTEGER {
rsa1(0),
rsa(1),
dsa(2),
ec(3),
none(999)
}
RlSshPublicKeyDigestFormat ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention describes the format used to display the public
key fingerprint. The hex format is the format used by PGP and OpenSSH.
The bubble-babble format is used by SSH.com software."
SYNTAX INTEGER {
hex(0),
bubbleBabble(1)
}
rlSshMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MIB version. The current version is 2"
::= { rlSsh 1 }
--
-- Server tables
--
rlSshServer OBJECT IDENTIFIER ::= { rlSsh 2 }
--
-- Host Public Key Table
--
rlSshServerHostPublicKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshServerHostPublicKeyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the router's public key. Each row in this table
contains a fragment of the key, in printable binhex format. There may
be up to 160 characters in every fragment, and they are all combined
to form one key. The key is generated by writing to
rlSshServerRegenerateHostKey. To cause clients to connect to this router
without printing warning messages (and also prevent active
man-in-the-middle), the router's public key must printed out and inserted
into the client's authorized_keys file"
::= { rlSshServer 1 }
rlSshServerHostPublicKeyTableEntry OBJECT-TYPE
SYNTAX RlSshServerHostPublicKeyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshServerHostPublicKeyAlgorithm, rlSshServerHostPublicKeyFragmentId }
::= { rlSshServerHostPublicKeyTable 1 }
RlSshServerHostPublicKeyTableEntry ::= SEQUENCE {
rlSshServerHostPublicKeyAlgorithm RlSshPublicKeyAlgorithm,
rlSshServerHostPublicKeyFragmentId Unsigned32,
rlSshServerHostPublicKeyFragmentText DisplayString
}
rlSshServerHostPublicKeyAlgorithm OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the type of public key to be displayed."
::= { rlSshServerHostPublicKeyTableEntry 1 }
rlSshServerHostPublicKeyFragmentId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the index of this fragment in the final key. All segments must
be combined to form one big key."
::= { rlSshServerHostPublicKeyTableEntry 2 }
rlSshServerHostPublicKeyFragmentText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A part of the readable text entry for the server's public authorzation key."
::= { rlSshServerHostPublicKeyTableEntry 3 }
--
-- Host Public Key Fingerprint Table
--
rlSshServerHostPublicKeyFingerprintTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshServerHostPublicKeyFingerprintTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the fingerprint for the router's public key."
::= { rlSshServer 2 }
rlSshServerHostPublicKeyFingerprintTableEntry OBJECT-TYPE
SYNTAX RlSshServerHostPublicKeyFingerprintTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshServerHostPublicKeyFingerprintAlgorithm, rlSshServerHostPublicKeyFingerprintDigestFormat }
::= { rlSshServerHostPublicKeyFingerprintTable 1 }
RlSshServerHostPublicKeyFingerprintTableEntry ::= SEQUENCE {
rlSshServerHostPublicKeyFingerprintAlgorithm RlSshPublicKeyAlgorithm,
rlSshServerHostPublicKeyFingerprintDigestFormat RlSshPublicKeyDigestFormat,
rlSshServerHostPublicKeyFingerprint DisplayString
}
rlSshServerHostPublicKeyFingerprintAlgorithm OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the type of public key to be displayed."
::= { rlSshServerHostPublicKeyFingerprintTableEntry 1 }
rlSshServerHostPublicKeyFingerprintDigestFormat OBJECT-TYPE
SYNTAX RlSshPublicKeyDigestFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Format of the digest to be displayed (OpenSSH or SSH.com)."
::= { rlSshServerHostPublicKeyFingerprintTableEntry 2 }
rlSshServerHostPublicKeyFingerprint OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SECSH format fingerprint of the server's public key. To prevent man in
the middle attacks, users should make sure the ssh Server's fingerprint,
as printed in the connection process, is similar to the one printed here."
::= { rlSshServerHostPublicKeyFingerprintTableEntry 3 }
--
-- Authorized Key Table
--
rlSshServerAuthorizedUsersPublicKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshServerAuthorizedUsersPublicKeyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains public keys for all users who are authorized to access
the router. For a user to be able to log in using SSH, the user name must
appear in this table, and the user's public key must match the one found
here."
::= { rlSshServer 3 }
rlSshServerAuthorizedUsersPublicKeyTableEntry OBJECT-TYPE
SYNTAX RlSshServerAuthorizedUsersPublicKeyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshServerAuthorizedUserName,
rlSshServerAuthorizedUserPublicKeyFragmentId }
::= { rlSshServerAuthorizedUsersPublicKeyTable 1 }
RlSshServerAuthorizedUsersPublicKeyTableEntry ::= SEQUENCE {
rlSshServerAuthorizedUserName DisplayString,
rlSshServerAuthorizedUserPublicKeyFragmentId Unsigned32,
rlSshServerAuthorizedUserPublicKeyFragmentText DisplayString,
rlSshServerAuthorizedUserPublicKeyFragmentStatus RowStatus
}
rlSshServerAuthorizedUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the user who owns this public key. Both the user name and the
key bytes must match before a user is authenticated using this key."
::= { rlSshServerAuthorizedUsersPublicKeyTableEntry 1 }
rlSshServerAuthorizedUserPublicKeyFragmentId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies the index of this fragment in the final key. All segments must
be combined to form one big key."
::= { rlSshServerAuthorizedUsersPublicKeyTableEntry 2 }
rlSshServerAuthorizedUserPublicKeyFragmentText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A part of the readable text entry for the user's public authorzation key."
::= { rlSshServerAuthorizedUsersPublicKeyTableEntry 3 }
rlSshServerAuthorizedUserPublicKeyFragmentStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Create or delete a fragment of the user's public key.
A user is deleted if it has no remaining fragments."
::= { rlSshServerAuthorizedUsersPublicKeyTableEntry 4 }
--
-- New 01-01-03: Authorized user fingerprint table.
--
rlSshServerAuthorizedUsersPublicKeyFingerprintTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the fingerprints of the public keys for all users who
are authorized to access the router.
To prevent man in the middle attacks, users should make sure the
user's fingerprint, as printed in the connection process, is similar
to the one printed here."
::= { rlSshServer 5 }
rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry OBJECT-TYPE
SYNTAX RlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshServerAuthorizedUserFingerprintName,
rlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat }
::= { rlSshServerAuthorizedUsersPublicKeyFingerprintTable 1 }
RlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry ::= SEQUENCE {
rlSshServerAuthorizedUserFingerprintName DisplayString,
rlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat RlSshPublicKeyDigestFormat,
rlSshServerAuthorizedUserPublicKeyFingerprintAlgorithm RlSshPublicKeyAlgorithm,
rlSshServerAuthorizedUserPublicKeyFingerprint DisplayString
}
rlSshServerAuthorizedUserFingerprintName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the user who owns this public key. Both the user name and the
key bytes must match before a user is authenticated using this key."
::= { rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry 1 }
rlSshServerAuthorizedUserPublicKeyFingerprintAlgorithm OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the type of public key to be displayed."
::= { rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry 2 }
rlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat OBJECT-TYPE
SYNTAX RlSshPublicKeyDigestFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Format of the digest to be displayed (OpenSSH or SSH.com)."
::= { rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry 3 }
rlSshServerAuthorizedUserPublicKeyFingerprint OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SECSH format fingerprint of the user's public key. To prevent man in
the middle attacks, users should make sure their ssh fingerprint,
as printed in the connection process, is similar to the one printed here."
::= { rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry 4 }
--
-- Session Table
--
rlSshServerSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshServerSessionTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row in this table corresponds to an active SSH session with
the server"
::= { rlSshServer 6 }
rlSshServerSessionTableEntry OBJECT-TYPE
SYNTAX RlSshServerSessionTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshServerSessionIdentifier }
::= { rlSshServerSessionTable 1 }
RlSshServerSessionTableEntry ::= SEQUENCE {
rlSshServerSessionIdentifier Unsigned32,
rlSshServerSessionPeerAddress IpAddress,
rlSshServerSessionPeerPort Unsigned32,
rlSshServerSessionUsername DisplayString,
rlSshServerSessionPeerVersion DisplayString,
rlSshServerSessionCipher DisplayString,
rlSshServerSessionHMAC DisplayString
}
rlSshServerSessionIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the connection to which this row corresponds."
::= { rlSshServerSessionTableEntry 1 }
rlSshServerSessionPeerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network address of the remote host connected to the server."
::= { rlSshServerSessionTableEntry 2 }
rlSshServerSessionPeerPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source network port of the remote host connected to the server."
::= { rlSshServerSessionTableEntry 3 }
rlSshServerSessionPeerVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client version of the remote host connected to the server."
::= { rlSshServerSessionTableEntry 4 }
rlSshServerSessionUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSH authenticated name of user connected to the server."
::= { rlSshServerSessionTableEntry 5 }
rlSshServerSessionCipher OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Data encryption cipher used in this connection."
::= { rlSshServerSessionTableEntry 6 }
rlSshServerSessionHMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Message authentication code used in this connection."
::= { rlSshServerSessionTableEntry 7 }
--
-- Session Inet Table
--
rlSshServerSessionInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshServerSessionInetTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row in this table corresponds to an active SSH session with the server"
::= { rlSshServer 7 }
rlSshServerSessionInetTableEntry OBJECT-TYPE
SYNTAX RlSshServerSessionInetTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX { rlSshServerSessionInetIdentifier }
::= { rlSshServerSessionInetTable 1 }
RlSshServerSessionInetTableEntry ::= SEQUENCE {
rlSshServerSessionInetIdentifier Unsigned32,
rlSshServerSessionInetPeerAddressType InetAddressType,
rlSshServerSessionInetPeerAddress InetAddress,
rlSshServerSessionInetPeerPort Unsigned32,
rlSshServerSessionInetUsername DisplayString,
rlSshServerSessionInetPeerVersion DisplayString,
rlSshServerSessionInetCipher DisplayString,
rlSshServerSessionInetHMAC DisplayString
}
rlSshServerSessionInetIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the connection to which this row corresponds."
::= { rlSshServerSessionInetTableEntry 1 }
rlSshServerSessionInetPeerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The network address of the remote host connected to the server."
::= { rlSshServerSessionInetTableEntry 2 }
rlSshServerSessionInetPeerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The network address of the remote host connected to the server."
::= { rlSshServerSessionInetTableEntry 3 }
rlSshServerSessionInetPeerPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source network port of the remote host connected to the server."
::= { rlSshServerSessionInetTableEntry 4 }
rlSshServerSessionInetPeerVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The client version of the remote host connected to the server."
::= { rlSshServerSessionInetTableEntry 5 }
rlSshServerSessionInetUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SSH authenticated name of user connected to the server."
::= { rlSshServerSessionInetTableEntry 6 }
rlSshServerSessionInetCipher OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Data encryption cipher used in this connection."
::= { rlSshServerSessionInetTableEntry 7 }
rlSshServerSessionInetHMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Message authentication code used in this connection."
::= { rlSshServerSessionInetTableEntry 8 }
rlSshServerImportExportSelfKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshServerImportExportSelfKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table can be used for 2 purposes:
1) Importing public/private key pair to serve as the device key when acting
as SSH server. This is done by setting entries to this table, according to
the specified format. When the last entry (footer) is set, the whole key
pair is checked and if valid, stored in CDB.
2) Exporting the device SSH server public/private key. This can be done by
performing GetNext operations on this table."
::= { rlSshServer 8 }
rlSshServerImportExportSelfKeyEntry OBJECT-TYPE
SYNTAX RlSshServerImportExportSelfKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshServerImportExportSelfKeyAlgorithm,
rlSshServerImportExportSelfKeyFormat,
rlSshServerImportExportSelfKeyFragmentId}
::= { rlSshServerImportExportSelfKeyTable 1 }
RlSshServerImportExportSelfKeyEntry ::= SEQUENCE {
rlSshServerImportExportSelfKeyAlgorithm RlSshPublicKeyAlgorithm,
rlSshServerImportExportSelfKeyFormat INTEGER,
rlSshServerImportExportSelfKeyFragmentId INTEGER,
rlSshServerImportExportSelfKeyFragmentText OCTET STRING
}
rlSshServerImportExportSelfKeyAlgorithm OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the type of key pair."
::= { rlSshServerImportExportSelfKeyEntry 1 }
rlSshServerImportExportSelfKeyFormat OBJECT-TYPE
SYNTAX INTEGER {
uuencoded-format(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the format of public/key pair. The following formats are
supported for import/export:
1) uuencoded_format - in this format both private and public key are in
uu-encoded format, and are seperated from one another by header and footer.
An example of the concateneation of all fragments in this format is:
-----BEGIN RSA PRIVATE KEY-----
tDaNkZZoCxXfkLLsLDlZ6T9H8U4Gz637eRV7BYBpapkidAxY1UG0/qgfKLPkbId4wzht6ArV9bE4fMtX
wSMOxL3q31pOmUdVhjbWYcgZQBDy1DjFSbuIEdP85c96B9bBE2nPv90mSvb/6j8R2NItT/KJeiYMtLtI
N3m6/zESKJGIrX0jP1RFDjVZSS5chSAFgB0egsLZEyOQn7jAqpX/x/easD2J6F/OjPXlJ9Hff2tMb3NU
QYyBoWH2J9IxhWB6Vo66R9Y04JGR18uL/rV2sMCtpg5ppkVTEpNTp9qE1yXocR2NmzUfNFap+GJ4IHj8
CzkVfmJM/kEWaJsYgHbAgLyRg4QVyelfobv1B71aQ+u1z9KGu/QajkWdR04OQfsGOL1CvU2LGYDcRjfH
jv+jl/UkDRRjoD9kt2WvouT+OL6esvKl0OJBqWbGNXg9TWv/VLtJIwgUno+MLaJuOM4Fh44+wpnqUXwQ
TFtBFc8pzt5BoOwbv9gXpicTkq4/+GhwXWXxSVFebKhnHAvKSLT+Ba7K7ZeR8EIIxbXdDNFOiS45R2KI
jxxXLXK44u6KGl5MygCKXUOFlJ+Zhgrq6ZH17z/RVJQ2CWqb5Ekn9GY3kH9QZ3mb4MDPfriWi2lHGXHY
JmJd4SLQhpBdnOS5tu84QmyU3dNbAdzghDsR+dEY/6g7Cn0kcVkeHNZ0H+mCZik5f6XBD8eplkk43bdR
FrkwTeAjwurGcKwdiKkR4DlfSq3DKssVBucTqUpqsKqPXLwTIL44rWKhEPXgGPB2XDG0VLvIRKkAgEGI
LNTwOm091Ro=
-----END RSA PRIVATE KEY-----
-----BEGIN RSA PUBLIC KEY-----
MIGHAoGBAOeIC9gRg3YaEGGMp3C00qNwLINAEDZV/J4BWM5WnWwCWZyHXDs2XiEmFu0ZONAD4gcT2f2f
NNfCBPye39VVuOkKQuSV0MLLX5800LZ4y1BNcPzPZHpnGaCzl7iAjhfj9MolzAh5VRjeiYt0t1um4dm+
q9A4BtfpJqDYxCW9uxd/AgEj
-----END RSA PUBLIC KEY-----
"
::= { rlSshServerImportExportSelfKeyEntry 2 }
rlSshServerImportExportSelfKeyFragmentId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the index of this fragment in the key pair input/output."
::= { rlSshServerImportExportSelfKeyEntry 3 }
rlSshServerImportExportSelfKeyFragmentText OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A part of the readable text entry for the key pair input/output."
::= { rlSshServerImportExportSelfKeyEntry 4 }
--
-- SSH Server Scalars
--
rlSshServerPort OBJECT-TYPE
SYNTAX Unsigned32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the TCP port used by the SSH 2 Server to listen for incoming
connections."
DEFVAL { 22 }
::= { rlSshServer 101 }
rlSshServerEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables listening for incoming SSH2 connections on the port defined in
rlSshServerPort."
::= { rlSshServer 102 }
rlSshServerEnablePublicKeyAuthentication OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If PK authentication is enabled, incoming SSH connections are
authenticated using public key authentication (using
rlSshServerAuthorizedUsersPublicKeyTable), before authenticating using
the router's standard AAA."
::= { rlSshServer 103 }
rlSshServerRegenerateHostKey OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting to a value other than none results in the Server (Host) Key
being regenerated. The key size is host-specific."
::= { rlSshServer 104 }
rlSshServerDefaultKeyFlag OBJECT-TYPE
SYNTAX INTEGER {
rsa(1),
dsa(2),
rsa-dsa(3),
ec(4),
all(99),
none(100)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This scalar indicates which of the SSH server keys are default keys
(automatically generated)."
::= { rlSshServer 105 }
rlSshServerDeleteSelfKey OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting to a value other than 'none' results in deleting the server self
key of the chosen type. As a result a default key may be created
(according to the MTSC..)"
::= { rlSshServer 106 }
rlSshServerEnablePublicKeyAuthAutoLogin OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If PK authentication is succesfull and AAA local DB method
is enabled for SSH line, the username is checked with AAA
local DB. If present, the user is authenticated automatically
without prompting for username or password."
::= { rlSshServer 107 }
rlSshServerEnablePasswordAuthentication OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If password authentication is enabled, incoming SSH connections are
authenticated with username/password authentication using
the router's standard AAA."
::= { rlSshServer 108 }
--
-- SSH Client Scalars
--
rlSshClient OBJECT IDENTIFIER ::= { rlSsh 3 }
rlSshClientUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..70))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the default user name the ssh client will use when
authenticating to a remote server. In SCP sessions this global
user name will be used unless a specific user name has been specified
for the operation.
The value of this MIB must not contain charachters ':' or '@' (those
are used to indicate parameters seperation in SCP copy)."
DEFVAL { "anonymous" }
::= { rlSshClient 1 }
rlSshClientRegenerateSelfKey OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting to a value other than none results in the client self key
being regenerated. The key size is host-specific."
::= { rlSshClient 2 }
--
-- Client Self Public Key Table
--
rlSshClientSelfPublicKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshClientSelfPublicKeyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the router's client self public key. Each row in
this table contains a fragment of the key, in printable binhex format.
There may be up to 160 characters in every fragment, and they are all
combined to form one key. The key is generated by writing to
rlSshClientRegenerateSelfKey. To cause clients to connect to this router
without printing warning messages (and also prevent active
man-in-the-middle), the router's public key must printed out and
inserted into the client's authorized_keys file"
::= { rlSshClient 3 }
rlSshClientSelfPublicKeyTableEntry OBJECT-TYPE
SYNTAX RlSshClientSelfPublicKeyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshClientSelfPublicKeyAlgorithm, rlSshClientSelfPublicKeyFragmentId }
::= { rlSshClientSelfPublicKeyTable 1 }
RlSshClientSelfPublicKeyTableEntry ::= SEQUENCE {
rlSshClientSelfPublicKeyFragmentId Unsigned32,
rlSshClientSelfPublicKeyAlgorithm RlSshPublicKeyAlgorithm,
rlSshClientSelfPublicKeyFragmentText DisplayString
}
rlSshClientSelfPublicKeyFragmentId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the index of this fragment in the final key. All segments must
be combined to form one big key."
::= { rlSshClientSelfPublicKeyTableEntry 1 }
rlSshClientSelfPublicKeyAlgorithm OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the type of public key to be displayed."
::= { rlSshClientSelfPublicKeyTableEntry 2 }
rlSshClientSelfPublicKeyFragmentText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A part of the readable text entry for the router's client public
authorization key."
::= { rlSshClientSelfPublicKeyTableEntry 3 }
--
-- Client Self Key Fingerprint Table
--
rlSshClientSelfPublicKeyFingerprintTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshClientSelfPublicKeyFingerprintTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the fingerprint for the client's self key. "
::= { rlSshClient 4 }
rlSshClientSelfPublicKeyFingerprintTableEntry OBJECT-TYPE
SYNTAX RlSshClientSelfPublicKeyFingerprintTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshClientSelfPublicKeyFingerprintAlgorithm, rlSshClientSelfPublicKeyFingerprintDigestFormat }
::= { rlSshClientSelfPublicKeyFingerprintTable 1 }
RlSshClientSelfPublicKeyFingerprintTableEntry ::= SEQUENCE {
rlSshClientSelfPublicKeyFingerprintAlgorithm RlSshPublicKeyAlgorithm,
rlSshClientSelfPublicKeyFingerprintDigestFormat RlSshPublicKeyDigestFormat,
rlSshClientSelfPublicKeyFingerprint DisplayString
}
rlSshClientSelfPublicKeyFingerprintAlgorithm OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the type of public key to be displayed."
::= { rlSshClientSelfPublicKeyFingerprintTableEntry 1 }
rlSshClientSelfPublicKeyFingerprintDigestFormat OBJECT-TYPE
SYNTAX RlSshPublicKeyDigestFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Format of the digest to be displayed (OpenSSH or SSH.com)."
::= { rlSshClientSelfPublicKeyFingerprintTableEntry 2 }
rlSshClientSelfPublicKeyFingerprint OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SECSH format fingerprint of the client's self key. To prevent man in
the middle attacks, users should make sure the ssh Server's fingerprint,
as printed in the connection process, is similar to the one printed here."
::= { rlSshClientSelfPublicKeyFingerprintTableEntry 3 }
rlSshClientAuthenticationMethod OBJECT-TYPE
SYNTAX INTEGER {
public-key-rsa(1),
public-key-dsa(2),
password(3),
public-key-ec(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the global authentication method for SSH client. SSH client
will apply this authentication method upon connecting to a remote server,
if no specific authentication method has been defined for this operation."
::= { rlSshClient 5 }
rlSshClientPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..70))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the global password for SSH client, to be used for 'password'
authentication. SSH client will use this password during authentication
phase (when connecting remote server), in case no specific password has
been specified for this operation.
The value of this MIB must not contain charachters ':' or '@' (those
are used to indicate parameters seperation in SCP copy).
Upon setting the password, its length must be in range 1-70."
::= { rlSshClient 6 }
rlSshClientPasswordChangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshClientPasswordChangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows the user to change the password in a remote SSH server.
It should be used when working with 'password' authentication with remote
server in SCP sessions.
Set operation on this table will initiate SCP session with the SSH server
whose inet address is specified in the key rlSshClientPasswordChangeInetAddress.
During this session the password for username rlSshClientPasswordChangeUsername
will be changed in the server from rlSshClientPasswordChangeOldPassword to
rlSshClientPasswordChangeNewPassword.
The Set operation might fail, in case an SCP session is already being
held. In case 'noError' is returned, the user can poll the fields
rlSshClientPasswordChangeStatus and rlSshClientPasswordChangeFailureReason
in order to get information on operation status and possible failure
reason. Note: up to 3 status records can be saved."
::= { rlSshClient 7 }
rlSshClientPasswordChangeEntry OBJECT-TYPE
SYNTAX RlSshClientPasswordChangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshClientPasswordChangeInetAddrType,
rlSshClientPasswordChangeInetAddr}
::= { rlSshClientPasswordChangeTable 1 }
RlSshClientPasswordChangeEntry ::= SEQUENCE {
rlSshClientPasswordChangeInetAddrType InetAddressType,
rlSshClientPasswordChangeInetAddr InetAddress,
rlSshClientPasswordChangeUsername DisplayString,
rlSshClientPasswordChangeOldPassword DisplayString,
rlSshClientPasswordChangeNewPassword DisplayString,
rlSshClientPasswordChangeStatus INTEGER,
rlSshClientPasswordChangeFailureReason DisplayString
}
rlSshClientPasswordChangeInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the inet address type of remote SCP server"
::= { rlSshClientPasswordChangeEntry 1 }
rlSshClientPasswordChangeInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the inet address of remote SCP server"
::= { rlSshClientPasswordChangeEntry 2 }
rlSshClientPasswordChangeUsername OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..70))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the username for which the password change is required."
::= { rlSshClientPasswordChangeEntry 3 }
rlSshClientPasswordChangeOldPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..70))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the old password that was in use for rlSshClientPasswordChangeUsername
until now. Upon setting a value in this entry, length of this field value
must be 6-70. Password of length 0 will always be returned on GET operations."
::= { rlSshClientPasswordChangeEntry 4 }
rlSshClientPasswordChangeNewPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..70))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the new password that should be in use for
rlSshClientPasswordChangeUsername from now on. Upon setting a value in this
entry, length of this field value must be 6-70.
Password of length 0 will always be returned on GET operations."
::= { rlSshClientPasswordChangeEntry 5 }
rlSshClientPasswordChangeStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
succeeded(2),
failed(3),
noData(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the status of last password change operation on remote server
identified by rlSshClientPasswordChangeInetAddress. In case this data was
erased (3 or more password change operations have been performed since
the operation on this server), the status will be 'noData'."
::= { rlSshClientPasswordChangeEntry 6 }
rlSshClientPasswordChangeFailureReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In case the value of rlSshClientPasswordChangeStatus is 'failed', this
field will contain the failure reason."
::= { rlSshClientPasswordChangeEntry 7 }
rlSshClientDeleteSelfKey OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting to a value other than 'none' results in deleting the client self
key of the chosen type."
::= { rlSshClient 8 }
rlSshClientImportExportSelfKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshClientImportExportSelfKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table can be used for 2 purposes:
1) Importing public/private key pair to serve as the device key when acting
as SSH client. This is done by setting entries to this table, according to
the specified format. When the last entry (footer) is set, the whole key
pair is checked and if valid, stored in CDB.
2) Exporting the device SSH client public/private key. This can be done by
performing GetNext operations on this table."
::= { rlSshClient 9 }
rlSshClientImportExportSelfKeyEntry OBJECT-TYPE
SYNTAX RlSshClientImportExportSelfKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshClientImportExportSelfKeyAlgorithm,
rlSshClientImportExportSelfKeyFormat,
rlSshClientImportExportSelfKeyFragmentId}
::= { rlSshClientImportExportSelfKeyTable 1 }
RlSshClientImportExportSelfKeyEntry ::= SEQUENCE {
rlSshClientImportExportSelfKeyAlgorithm RlSshPublicKeyAlgorithm,
rlSshClientImportExportSelfKeyFormat INTEGER,
rlSshClientImportExportSelfKeyFragmentId INTEGER,
rlSshClientImportExportSelfKeyFragmentText OCTET STRING
}
rlSshClientImportExportSelfKeyAlgorithm OBJECT-TYPE
SYNTAX RlSshPublicKeyAlgorithm
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the type of key pair."
::= { rlSshClientImportExportSelfKeyEntry 1 }
rlSshClientImportExportSelfKeyFormat OBJECT-TYPE
SYNTAX INTEGER {
uuencoded-format(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the format of public/key pair. The following formats are
supported for import/export:
1) uuencoded_format - in this format both private and public key are in
uu-encoded format, and are seperated from one another by header and footer.
An example of the concateneation of all fragments in this format is:
-----BEGIN ENCRYPTED RSA PRIVATE KEY-----
tDaNkZZoCxXfkLLsLDlZ6T9H8U4Gz637eRV7BYBpapkidAxY1UG0/qgfKLPkbId4wzht6ArV9bE4fMtX
wSMOxL3q31pOmUdVhjbWYcgZQBDy1DjFSbuIEdP85c96B9bBE2nPv90mSvb/6j8R2NItT/KJeiYMtLtI
N3m6/zESKJGIrX0jP1RFDjVZSS5chSAFgB0egsLZEyOQn7jAqpX/x/easD2J6F/OjPXlJ9Hff2tMb3NU
QYyBoWH2J9IxhWB6Vo66R9Y04JGR18uL/rV2sMCtpg5ppkVTEpNTp9qE1yXocR2NmzUfNFap+GJ4IHj8
CzkVfmJM/kEWaJsYgHbAgLyRg4QVyelfobv1B71aQ+u1z9KGu/QajkWdR04OQfsGOL1CvU2LGYDcRjfH
jv+jl/UkDRRjoD9kt2WvouT+OL6esvKl0OJBqWbGNXg9TWv/VLtJIwgUno+MLaJuOM4Fh44+wpnqUXwQ
TFtBFc8pzt5BoOwbv9gXpicTkq4/+GhwXWXxSVFebKhnHAvKSLT+Ba7K7ZeR8EIIxbXdDNFOiS45R2KI
jxxXLXK44u6KGl5MygCKXUOFlJ+Zhgrq6ZH17z/RVJQ2CWqb5Ekn9GY3kH9QZ3mb4MDPfriWi2lHGXHY
JmJd4SLQhpBdnOS5tu84QmyU3dNbAdzghDsR+dEY/6g7Cn0kcVkeHNZ0H+mCZik5f6XBD8eplkk43bdR
FrkwTeAjwurGcKwdiKkR4DlfSq3DKssVBucTqUpqsKqPXLwTIL44rWKhEPXgGPB2XDG0VLvIRKkAgEGI
LNTwOm091Ro=
-----END RSA PRIVATE KEY-----
-----BEGIN RSA PUBLIC KEY-----
MIGHAoGBAOeIC9gRg3YaEGGMp3C00qNwLINAEDZV/J4BWM5WnWwCWZyHXDs2XiEmFu0ZONAD4gcT2f2f
NNfCBPye39VVuOkKQuSV0MLLX5800LZ4y1BNcPzPZHpnGaCzl7iAjhfj9MolzAh5VRjeiYt0t1um4dm+
q9A4BtfpJqDYxCW9uxd/AgEj
-----END RSA PUBLIC KEY-----
"
::= { rlSshClientImportExportSelfKeyEntry 2 }
rlSshClientImportExportSelfKeyFragmentId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the index of this fragment in the key pair input/output."
::= { rlSshClientImportExportSelfKeyEntry 3 }
rlSshClientImportExportSelfKeyFragmentText OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A part of the readable text entry for the key pair input/output."
::= { rlSshClientImportExportSelfKeyEntry 4 }
rlSshClientRemoteServerPublicKeyFingerprintTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSshClientRemoteServerPublicKeyFingerprintEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for storing fingerprints of remote servers public keys. It is used for
the purpose of server authentication. An entry can be inserted to this table
either explicitly by user configuration, or during copy operation, after
user's approval."
::= { rlSshClient 10 }
rlSshClientRemoteServerPublicKeyFingerprintEntry OBJECT-TYPE
SYNTAX RlSshClientRemoteServerPublicKeyFingerprintEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The row definition for this table."
INDEX { rlSshClientRemoteServerFingerprintInetAddrType,
rlSshClientRemoteServerFingerprintInetAddr,
rlSshClientRemoteServerFingerprint }
::= { rlSshClientRemoteServerPublicKeyFingerprintTable 1 }
RlSshClientRemoteServerPublicKeyFingerprintEntry ::= SEQUENCE {
rlSshClientRemoteServerFingerprintInetAddrType InetAddressType,
rlSshClientRemoteServerFingerprintInetAddr InetAddress,
rlSshClientRemoteServerFingerprint OCTET STRING,
rlSshClientRemoteServerFingerprintStatus RowStatus
}
rlSshClientRemoteServerFingerprintInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Remote server inet address type."
::= { rlSshClientRemoteServerPublicKeyFingerprintEntry 1 }
rlSshClientRemoteServerFingerprintInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Remote server inet address."
::= { rlSshClientRemoteServerPublicKeyFingerprintEntry 2 }
rlSshClientRemoteServerFingerprint OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remote server fingerprint."
::= { rlSshClientRemoteServerPublicKeyFingerprintEntry 3 }
rlSshClientRemoteServerFingerprintStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for this row."
::= { rlSshClientRemoteServerPublicKeyFingerprintEntry 4 }
rlSshClientRemoteServersAuthenticationEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this field to 'enable' enables remote servers authentication.
As a result, while opening a session with a remote server, the fingerprint
of the remote server will be computed and looked for in the table
rlSshClientRemoteServerPublicKeyFingerprintTable. If an entry with the key
(server-inet-address, server-fingerprint) is found, the server is considered
authenticated. Otherwise, the server is not authenticated (unless the user
specifically approved this server can be trusted)."
::= { rlSshClient 11 }
rlSshClientDefaultKeyFlag OBJECT-TYPE
SYNTAX INTEGER {
rsa(1),
dsa(2),
rsa-dsa(3),
ec(4),
all(99),
none(100)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This scalar indicates which of the SSH client keys are default keys
(automatically generated)."
::= { rlSshClient 12 }
END
Reference in a new issue View git blame Copy permalink