graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/VDSL2-LINE-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

7272 lines
278 KiB
Text
Raw Blame History

VDSL2-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
transmission,
Unsigned32,
NOTIFICATION-TYPE,
Integer32,
Counter32
FROM SNMPv2-SMI
ifIndex
FROM IF-MIB
TruthValue,
RowStatus
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
Adsl2LConfProfPmMode
FROM ADSL2-LINE-TC-MIB
HCPerfIntervalThreshold,
HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- [RFC3705]
Xdsl2Unit,
Xdsl2Direction,
Xdsl2Band,
Xdsl2TransmissionModeType,
Xdsl2RaMode,
Xdsl2InitResult,
Xdsl2OperationModes,
Xdsl2PowerMngState,
Xdsl2ConfPmsForce,
Xdsl2LinePmMode,
Xdsl2LineLdsf,
Xdsl2LdsfResult,
Xdsl2LineBpsc,
Xdsl2BpscResult,
Xdsl2LineReset,
Xdsl2SymbolProtection,
Xdsl2SymbolProtection8,
Xdsl2MaxBer,
Xdsl2ChInitPolicy,
Xdsl2ScMaskDs,
Xdsl2ScMaskUs,
Xdsl2CarMask,
Xdsl2RfiBands,
Xdsl2PsdMaskDs,
Xdsl2PsdMaskUs,
Xdsl2Tssi,
Xdsl2LastTransmittedState,
Xdsl2LineStatus,
Xdsl2ChInpReport,
Xdsl2ChAtmStatus,
Xdsl2ChPtmStatus,
Xdsl2UpboKLF,
Xdsl2BandUs,
Xdsl2LineProfiles,
Xdsl2LineUs0Mask,
Xdsl2LineClassMask,
Xdsl2LineLimitMask,
Xdsl2LineUs0Disable,
Xdsl2LinePsdMaskSelectUs,
Xdsl2LineCeFlag,
Xdsl2LineSnrMode,
Xdsl2LineTxRefVnDs,
Xdsl2LineTxRefVnUs,
Xdsl2BitsAlloc,
Xdsl2MrefPsdDs,
Xdsl2MrefPsdUs
FROM VDSL2-LINE-TC-MIB -- [This document]
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF;
vdsl2MIB MODULE-IDENTITY
LAST-UPDATED "200909300000Z" -- September 30, 2009
ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed
Sand Channel Systems
Postal: P.O. Box 37324
Raleigh NC 27627-732
Email: sneedmike@hotmail.com
Phone: +1 206 600 7022
Co-Chair: Menachem Dodge
ECI Telecom Ltd.
Postal: 30 Hasivim St.
Petach Tikva 49517,
Israel.
Email: mbdodge@ieee.org
Phone: +972 3 926 8421
Co-editor: Moti Morgenstern
ECI Telecom Ltd.
Postal: 30 Hasivim St.
Petach Tikva 49517,
Israel.
Email: moti.morgenstern@ecitele.com
Phone: +972 3 926 6258
Co-editor: Scott Baillie
NEC Australia
Postal: 649-655 Springvale Road,
Mulgrave, Victoria 3170,
Australia.
Email: scott.baillie@nec.com.au
Phone: +61 3 9264 3986
Co-editor: Umberto Bonollo
NEC Australia
Postal: 649-655 Springvale Road,
Mulgrave, Victoria 3170,
Australia.
Email: umberto.bonollo@nec.com.au
Phone: +61 3 9264 3385
"
DESCRIPTION
"
This document defines a Management Information Base (MIB)
module for use with network management protocols in the
Internet community for the purpose of managing VDSL2, ADSL,
ADSL2, and ADSL2+ lines.
The MIB module described in RFC 2662 [RFC2662] defines
objects used for managing Asymmetric Bit-Rate DSL (ADSL)
interfaces per [T1E1.413], [G.992.1], and [G.992.2].
These object descriptions are based upon the specifications
for the ADSL Embedded Operations Channel (EOC) as defined
in American National Standards Institute (ANSI) T1E1.413
[T1E1.413] and International Telecommunication Union (ITU-T)
G.992.1 [G.992.1] and G.992.2 [G.992.2].
The MIB module described in RFC 4706 [RFC4706] defines
objects used for managing ADSL2 interfaces per [G.992.3]
and [G.992.4], and ADSL2+ interfaces per [G.992.5]. That MIB
is also capable of managing ADSL interfaces per [T1E1.413],
[G.992.1], and [G.992.2].
This document does not obsolete RFC 2662 [RFC2662] or
RFC 4706 [RFC4706], but rather provides a more comprehensive
management model that manages VDSL2 interfaces per G.993.2
[G.993.2] as well as ADSL, ADSL2, and ADSL2+ technologies
per T1E1.413, G.992.1, G.992.2, G.992.3, G.992.4, and
G.992.5
([T1E1.413], [G.992.1], [G.992.2], [G.992.3], [G.992.4], and
[G.992.5], respectively).
Additionally, the management framework for VDSL2 lines
specified by the Digital Subscriber Line Forum
(DSLF) has been taken into consideration [TR-129]. That
framework is based on the ITU-T G.997.1 standard [G.997.1] and
its amendment 1 [G.997.1-Am1].
The MIB module is located in the MIB tree under MIB 2
transmission, as discussed in the MIB-2 Integration (RFC 2863
[RFC2863]) section of this document.
Copyright (c) 2009 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
- Redistributions of source code must retain the above
copyright notice, this list of conditions and the
following disclaimer.
- Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
- Neither the name of Internet Society, IETF or IETF Trust,
nor the names of specific contributors, may be used to
endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This version of this MIB module is part of RFC 5650;
see the RFC itself for full legal notices."
REVISION "200909300000Z" -- September 30, 2009
DESCRIPTION "Initial version, published as RFC 5650."
::= { transmission 251 }
xdsl2Notifications OBJECT IDENTIFIER ::= { vdsl2MIB 0 }
xdsl2Objects OBJECT IDENTIFIER ::= { vdsl2MIB 1 }
xdsl2Conformance OBJECT IDENTIFIER ::= { vdsl2MIB 2 }
------------------------------------------------
xdsl2Line OBJECT IDENTIFIER ::= { xdsl2Objects 1 }
xdsl2Status OBJECT IDENTIFIER ::= { xdsl2Objects 2 }
xdsl2Inventory OBJECT IDENTIFIER ::= { xdsl2Objects 3 }
xdsl2PM OBJECT IDENTIFIER ::= { xdsl2Objects 4 }
xdsl2Profile OBJECT IDENTIFIER ::= { xdsl2Objects 5 }
xdsl2Scalar OBJECT IDENTIFIER ::= { xdsl2Objects 6 }
------------------------------------------------
xdsl2PMLine OBJECT IDENTIFIER ::= { xdsl2PM 1 }
xdsl2PMChannel OBJECT IDENTIFIER ::= { xdsl2PM 2 }
------------------------------------------------
xdsl2ProfileLine OBJECT IDENTIFIER ::= { xdsl2Profile 1 }
xdsl2ProfileChannel OBJECT IDENTIFIER ::= { xdsl2Profile 2 }
xdsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2Profile 3 }
------------------------------------------------
xdsl2ScalarSC OBJECT IDENTIFIER ::= { xdsl2Scalar 1 }
------------------------------------------------
------------------------------------------------
-- xdsl2LineTable --
------------------------------------------------
xdsl2LineTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineTable contains configuration, command and
status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line.
Several objects in this table MUST be maintained in a persistent
manner."
::= { xdsl2Line 1 }
xdsl2LineEntry OBJECT-TYPE
SYNTAX Xdsl2LineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table is an interface index where the
interface has an ifType of vdsl2(251)."
INDEX { ifIndex }
::= { xdsl2LineTable 1 }
Xdsl2LineEntry ::=
SEQUENCE {
xdsl2LineConfTemplate SnmpAdminString,
xdsl2LineConfFallbackTemplate SnmpAdminString,
xdsl2LineAlarmConfTemplate SnmpAdminString,
xdsl2LineCmndConfPmsf Xdsl2ConfPmsForce,
xdsl2LineCmndConfLdsf Xdsl2LineLdsf,
xdsl2LineCmndConfLdsfFailReason Xdsl2LdsfResult,
xdsl2LineCmndConfBpsc Xdsl2LineBpsc,
xdsl2LineCmndConfBpscFailReason Xdsl2BpscResult,
xdsl2LineCmndConfBpscRequests Counter32,
xdsl2LineCmndAutomodeColdStart TruthValue,
xdsl2LineCmndConfReset Xdsl2LineReset,
xdsl2LineStatusActTemplate SnmpAdminString,
xdsl2LineStatusXtuTransSys Xdsl2TransmissionModeType,
xdsl2LineStatusPwrMngState Xdsl2PowerMngState,
xdsl2LineStatusInitResult Xdsl2InitResult,
xdsl2LineStatusLastStateDs Xdsl2LastTransmittedState,
xdsl2LineStatusLastStateUs Xdsl2LastTransmittedState,
xdsl2LineStatusXtur Xdsl2LineStatus,
xdsl2LineStatusXtuc Xdsl2LineStatus,
xdsl2LineStatusAttainableRateDs Unsigned32,
xdsl2LineStatusAttainableRateUs Unsigned32,
xdsl2LineStatusActPsdDs Integer32,
xdsl2LineStatusActPsdUs Integer32,
xdsl2LineStatusActAtpDs Integer32,
xdsl2LineStatusActAtpUs Integer32,
xdsl2LineStatusActProfile Xdsl2LineProfiles,
xdsl2LineStatusActLimitMask Xdsl2LineLimitMask,
xdsl2LineStatusActUs0Mask Xdsl2LineUs0Mask,
xdsl2LineStatusActSnrModeDs Xdsl2LineSnrMode,
xdsl2LineStatusActSnrModeUs Xdsl2LineSnrMode,
xdsl2LineStatusElectricalLength Unsigned32,
xdsl2LineStatusTssiDs Xdsl2Tssi,
xdsl2LineStatusTssiUs Xdsl2Tssi,
xdsl2LineStatusMrefPsdDs Xdsl2MrefPsdDs,
xdsl2LineStatusMrefPsdUs Xdsl2MrefPsdUs,
xdsl2LineStatusTrellisDs TruthValue,
xdsl2LineStatusTrellisUs TruthValue,
xdsl2LineStatusActualCe Unsigned32
}
xdsl2LineConfTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Configuration Template Table, xdsl2LineConfTemplateTable,
that applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" }
::= { xdsl2LineEntry 1 }
xdsl2LineConfFallbackTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to identify the template that will be
used if the xDSL2 line fails to operate using the primary
template. The primary template is identified using the
xdsl2LineConfTemplate object.
For example, a xDSL2 line may fall back to a template with a
lower rate if the rate specified in the primary template
cannot be achieved.
The value of this object identifies a row in the xDSL2 Line
Configuration Template Table, xdsl2LineConfTemplateTable.
Any row in the xdsl2LineConfTemplateTable table may be used as a
fall-back template.
If the xDSL2 line fails to operate using the fall-back template,
then the primary template should be retried.
The xTU-C should continue to alternate between the primary and
fall-back templates until one of them succeeds.
If the value of this object is a zero-length string, then no
fall-back template is defined and only the primary template will
be used.
Note that implementation of this object is not mandatory.
If this object is not supported, any attempt to modify this
object should result in the SET request being rejected.
This object MUST be maintained in a persistent manner."
::= { xdsl2LineEntry 2 }
xdsl2LineAlarmConfTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Alarm Configuration Template Table,
xdsl2LineAlarmConfTemplateTable, which applies to this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" }
::= { xdsl2LineEntry 3 }
xdsl2LineCmndConfPmsf OBJECT-TYPE
SYNTAX Xdsl2ConfPmsForce
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Power management state forced (PMSF). Defines the line
states to be forced by the near-end xTU on this line.
This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.3 (PMSF)"
DEFVAL { l3toL0 }
::= { xdsl2LineEntry 4 }
xdsl2LineCmndConfLdsf OBJECT-TYPE
SYNTAX Xdsl2LineLdsf
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loop diagnostic state forced (LDSF).
Defines whether the line should be forced into the loop
diagnostics mode by the near-end xTU of this line. Note that
a loop diagnostic may be initiated by the far-end xTU at any
time.
Only when the xdsl2LineStatusPwrMngState object is in the
'l3' state and the xdsl2LineCmndConfPmsf object is in the
'l0orL2toL3' state, can the line be forced into loop diagnostic
mode procedures. Upon successful completion of the loop
diagnostic mode procedures, the Access Node shall set this
object to 'inhibit', and xdsl2LineStatusPwrMngState will
remain in the 'l3' state. The loop diagnostic data shall be
available at least until xdsl2LineCmndConfPmsf is set to the
'l3toL0' state.
The results of the loop diagnostic procedure are stored in the
tables xdsl2SCStatusTable, xdsl2SCStatusBandTable, and
xdsl2SCStatusSegmentTable. The status of the loop diagnostic
procedure is indicated by xdsl2LineCmndConfLdsfFailReason.
As long as loop diagnostic procedures are not completed
successfully, attempts shall be made to do so, until the loop
diagnostic mode is no longer forced on the line through this
configuration parameter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.8 (LDSF)"
DEFVAL { inhibit }
::= { xdsl2LineEntry 5 }
xdsl2LineCmndConfLdsfFailReason OBJECT-TYPE
SYNTAX Xdsl2LdsfResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the most recent occasion when the loop
diagnostics state forced (LDSF) command was issued for the
associated line."
DEFVAL { none }
::= { xdsl2LineEntry 6 }
xdsl2LineCmndConfBpsc OBJECT-TYPE
SYNTAX Xdsl2LineBpsc
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Request a bits-per-subcarrier measurement to be made.
A request for a bits-per-subcarrier measurement is made by
setting this object to the value of 'measure'. Upon
completion of the measurement request, the Access Node shall set
this object to 'idle'.
The SNMP agent should allow initiating a bits-per-subcarrier
measurement process only if there is no other bits-per-subcarrier
measurement already running, and respond with an SNMP error
(e.g., wrongValue) otherwise.
Note that a bits-per-subcarrier measurement is also performed
during a line diagnostic procedure. This object provides an
additional mechanism to fetch the bits-per-subcarrier data. This
additional mechanism is provided so that bits-per-subcarrier
data may be fetched without forcing the line into no power state.
This is useful because the bits-per-subcarrier allocation may be
adjusted at show time due to rate adaption and bit swapping.
The implementation of this additional mechanism for measuring
bits per subcarrier is not mandatory.
The results of the bits-per-subcarrier measurement are stored in
xdsl2LineSegmentTable. The status of the bits-per-subcarrier
measurement is indicated by
xdsl2LineCmndConfBpscFailReason."
DEFVAL { idle }
::= { xdsl2LineEntry 7 }
xdsl2LineCmndConfBpscFailReason OBJECT-TYPE
SYNTAX Xdsl2BpscResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the most recent bits-per-subcarrier
measurement request issued for the associated line."
DEFVAL { none }
::= { xdsl2LineEntry 8 }
xdsl2LineCmndConfBpscRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measurement request counter.
This counter is incremented by one every time a request for a
bits-per-subcarrier measurement is made. A measurement request
is made by modifying the xdsl2LineCmndConfBpsc object from
idle(1) to the value measure(2).
The measurement results may be very large and will not fit
into a single PDU; hence, multiple SNMP GET requests may be
required to fetch the measurement results.
Because the measurement results cannot be fetched atomically,
it is possible for a second manager to start a new measurement
before a first manager has fetched all of its results.
An SNMP manager can use this object to ensure that the
measurement results retrieved using one or more GET requests
all belong to the measurement initiated by that manager.
The following steps are suggested in order for the SNMP
manager to initiate the bits-per-subcarrier measurement:
1. Wait for xdsl2LineCmndConfBpsc value to be idle(1).
2. Perform an SNMP GET for xdsl2LineCmndConfBpscRequests.
3. Wait a short delay (4 -> 8 seconds).
4. Perform an SNMP SET on xdsl2LineCmndConfBpsc with
the value measure(2).
5. If step 4 returns an error, then go to step 1.
6. Wait for xdsl2LineCmndConfBpsc value to be idle(1).
7. Fetch measurement results using one or more GET PDUs.
8. Perform an SNMP GET for xdsl2LineCmndConfBpscRequests.
9. Compute the difference between the two values of
xdsl2LineCmndConfBpscRequests. If the value is one,
then the results are valid, else go to step 1."
::= { xdsl2LineEntry 9 }
xdsl2LineCmndAutomodeColdStart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Automode cold start forced. This parameter is defined in
order to improve testing of the performance of xTUs supporting
automode when it is enabled in the MIB.
Change the value of this parameter to 'true' to indicate a change
in loop conditions applied to the devices under the test. The
xTUs shall reset any historical information used for automode
and for shortening G.994.1 handshake and initialization.
Automode is the case where multiple operation-modes are enabled
through the xdsl2LConfProfXtuTransSysEna object in the line
configuration profile being used for the line, and where the
selection of the actual operation-mode depends not only on the
common capabilities of both xTUs (as exchanged in G.994.1), but
also on achievable data rates under given loop conditions."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.10
(Automode Cold Start Forced)"
DEFVAL { false }
::= { xdsl2LineEntry 10 }
xdsl2LineCmndConfReset OBJECT-TYPE
SYNTAX Xdsl2LineReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Request a line reset to occur.
If this object is set to the value of 'reset', then force
the line to reset (i.e., the modems will retrain).
When the line has successfully reset, the SNMP agent will
set the value of this object to 'idle'.
Note that the xdsl2LineCmndConfPmsf object will always take
precedence over this object.
If the xdsl2LineCmndConfPmsf object is set to the value
'l0orL2toL3', then the line MUST NOT return to the Showtime
state due to a reset request action performed using this
object."
DEFVAL { idle }
::= { xdsl2LineEntry 11 }
xdsl2LineStatusActTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to identify the template that is
currently in use for this line.
This object is updated when a successful line initialization
occurs.
This object indicates if the primary template
(xdsl2LineConfTemplate) is in use or the fall-back template
(xdsl2LineConfFallbackTemplate) is in use.
If the line is not successfully initialized, then the value of
this object will be a zero-length string."
::= { xdsl2LineEntry 12 }
xdsl2LineStatusXtuTransSys OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The xTU Transmission System (xTS) in use.
It is coded in a bitmap representation with one bit set to
'1' (the selected coding for the DSL line). This
parameter may be derived from the handshaking procedures defined
in Recommendation G.994.1. A set of xDSL line transmission
modes, with one bit per mode."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.1
(xDSL transmission system)"
DEFVAL { {} }
::= { xdsl2LineEntry 13 }
xdsl2LineStatusPwrMngState OBJECT-TYPE
SYNTAX Xdsl2PowerMngState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current power management state."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.5
(Line power management state)"
DEFVAL { l3 }
::= { xdsl2LineEntry 14 }
xdsl2LineStatusInitResult OBJECT-TYPE
SYNTAX Xdsl2InitResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the last full initialization
performed on the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.6
(Initialization success/failure cause)"
DEFVAL { noFail }
::= { xdsl2LineEntry 15 }
xdsl2LineStatusLastStateDs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last successful transmitted initialization state in
the downstream direction in the last full initialization
performed on the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.7
(Downstream last transmitted state)"
DEFVAL { atucG9941 }
::= { xdsl2LineEntry 16 }
xdsl2LineStatusLastStateUs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last successful transmitted initialization state in the
upstream direction in the last full initialization performed on
the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.8
(Upstream last transmitted state)"
DEFVAL { aturG9941 }
::= { xdsl2LineEntry 17 }
xdsl2LineStatusXtur OBJECT-TYPE
SYNTAX Xdsl2LineStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state (existing failures) of the xTU-R.
This is a bitmap of possible conditions."
REFERENCE "ITU-T G.997.1, paragraph #7.1.1.2
(Line far-end failures)"
DEFVAL { { noDefect } }
::= { xdsl2LineEntry 18 }
xdsl2LineStatusXtuc OBJECT-TYPE
SYNTAX Xdsl2LineStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state (existing failures) of the xTU-C.
This is a bitmap of possible conditions."
REFERENCE "ITU-T G.997.1, paragraph #7.1.1.1
(Line near-end failures)"
DEFVAL { { noDefect } }
::= { xdsl2LineEntry 19 }
xdsl2LineStatusAttainableRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the xTU-C transmitter and the xTU-R receiver, coded in
bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.19 (ATTNDRds)"
DEFVAL { 0 }
::= { xdsl2LineEntry 20 }
xdsl2LineStatusAttainableRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the
xTU-R transmitter and the xTU-C receiver, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.20 (ATTNDRus)"
DEFVAL { 0 }
::= { xdsl2LineEntry 21 }
xdsl2LineStatusActPsdDs OBJECT-TYPE
SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Power Spectral Density (PSD) Downstream. The average
downstream transmit PSD over the subcarriers used for downstream.
It ranges from -900 to 0 units of 0.1 dBm/Hz (physical values are
-90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.21 (ACTPSDds)"
DEFVAL { 2147483647 }
::= { xdsl2LineEntry 22 }
xdsl2LineStatusActPsdUs OBJECT-TYPE
SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Power Spectral Density (PSD) Upstream. The average
upstream transmit PSD over the subcarriers used for upstream.
It ranges from -900 to 0 units of 0.1 dBm/Hz (physical values are
-90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.22 (ACTPSDus)"
DEFVAL { 2147483647 }
::= { xdsl2LineEntry 23 }
xdsl2LineStatusActAtpDs OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Transmit Power Downstream.
The total amount of transmit power delivered by the xTU-C at
the U-C reference point, at the instant of measurement. It
ranges from -310 to 310 units of 0.1 dBm (physical values are -31
to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.24 (ACTATPds)"
DEFVAL { 2147483647 }
::= { xdsl2LineEntry 24 }
xdsl2LineStatusActAtpUs OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Transmit Power Upstream.
The total amount of transmit power delivered by the xTU-R at the
U-R reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dBm (physical values are -31
to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.25 (ACTATPus)"
DEFVAL { 2147483647 }
::= { xdsl2LineEntry 25 }
xdsl2LineStatusActProfile OBJECT-TYPE
SYNTAX Xdsl2LineProfiles
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The G.993.2 profile in use.
The configuration parameter xdsl2LConfProfProfiles defines
the set of allowed G.993.2 profiles. This parameter indicates
the profile in use on this line.
This parameter may be derived from the handshaking procedures
defined in ITU-T Recommendation G.994.1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.2 (VDSL2 Profile)"
DEFVAL { {} }
::= { xdsl2LineEntry 26 }
xdsl2LineStatusActLimitMask OBJECT-TYPE
SYNTAX Xdsl2LineLimitMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Limit PSD mask and band plan in use.
The configuration parameter xdsl2LConfProfLimitMask defines
the set of allowed G.993.2 limit PSD masks.
This parameter indicates the limit PSD mask in use on this
line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.3
(VDSL2 Limit PSD Mask and Band plan)"
DEFVAL { {} }
::= { xdsl2LineEntry 27 }
xdsl2LineStatusActUs0Mask OBJECT-TYPE
SYNTAX Xdsl2LineUs0Mask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The US0 PSD mask in use.
The configuration parameter xdsl2LConfProfUs0Mask defines
the set of allowed US0 PSD masks.
This parameter indicates the US0 PSD mask in use on this line.
This parameter may be derived from the handshaking procedures
defined in ITU-T Recommendation G.994.1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.4
(VDSL2 US0 PSD Mask)"
DEFVAL { {} }
::= { xdsl2LineEntry 28 }
xdsl2LineStatusActSnrModeDs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates if the transmitter-referred
virtual noise is active on the line in the downstream
direction.
The configuration parameter xdsl2LConfProfSnrModeDs is used to
configure referred virtual noise."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.15 (ACTSNRMODEds)"
DEFVAL { virtualNoiseDisabled }
::= { xdsl2LineEntry 29 }
xdsl2LineStatusActSnrModeUs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates if the transmitter-referred virtual
noise is active on the line in the upstream direction.
The configuration parameter xdsl2LConfProfSnrModeUs is used to
configure referred virtual noise."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.18 (ACTSNRMODEus)"
DEFVAL { virtualNoiseDisabled }
::= { xdsl2LineEntry 30 }
xdsl2LineStatusElectricalLength OBJECT-TYPE
SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter contains the estimated electrical length
expressed in dB at 1 MHz, kl0. This is the final electrical
length that would have been sent from the VTU-O to VTU-R if the
electrical length was not forced by the CO-MIB.
The value ranges from 0 to 128 dB in steps of 0.1 dB."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.23 (UPBOKLE)"
DEFVAL { 0 }
::= { xdsl2LineEntry 31 }
xdsl2LineStatusTssiDs OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints expressed
as the set of breakpoints exchanged
during G.994.1 (Downstream)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.5 (TSSpsds)"
::= { xdsl2LineEntry 32 }
xdsl2LineStatusTssiUs OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints expressed
as the set of breakpoints exchanged
during G.994.1 (Upstream)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.6 (TSSpsus)"
::= { xdsl2LineEntry 33 }
xdsl2LineStatusMrefPsdDs OBJECT-TYPE
SYNTAX Xdsl2MrefPsdDs
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MEDLEY Reference PSD status parameters
in the downstream
direction expressed as the set of breakpoints exchanged at
initialization."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.7 (MREFPSDds)"
::= { xdsl2LineEntry 34 }
xdsl2LineStatusMrefPsdUs OBJECT-TYPE
SYNTAX Xdsl2MrefPsdUs
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MEDLEY Reference PSD status parameters in the
upstream direction expressed as the set of breakpoints
exchanged at initialization."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.8 (MREFPSDus)"
::= { xdsl2LineEntry 35 }
xdsl2LineStatusTrellisDs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter reports whether trellis coding is in use in
the downstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.30 (TRELLISds)"
DEFVAL { false }
::= { xdsl2LineEntry 36 }
xdsl2LineStatusTrellisUs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter reports whether trellis coding is in use in
the upstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.31 (TRELLISus)"
DEFVAL { false }
::= { xdsl2LineEntry 37 }
xdsl2LineStatusActualCe OBJECT-TYPE
SYNTAX Unsigned32 (2..16)
UNITS "N/32 samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(ACTUALCE)
This parameter reports the cyclic extension used on the line. It
is coded as an unsigned integer from 2 to 16 in units of N/32
samples, where 2N is the Inverse Discrete Fourier Transform
(IDFT) size."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.32 (ACTUALCE)"
DEFVAL { 2 }
::= { xdsl2LineEntry 38 }
------------------------------------------------
-- xdsl2LineSegmentTable --
------------------------------------------------
xdsl2LineSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineSegmentTable contains status parameters
of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
The parameters in this table are updated when a measurement
request is made using the xdsl2LineCmndConfBpsc object.
Note that a bits-per-subcarrier measurement is also performed
during a line diagnostic procedure. This table provides an
additional mechanism to fetch the bits-per-subcarrier data. This
additional mechanism is provided so that bits-per-subcarrier
data may be fetched without forcing the line into no power state.
This is useful because the bits-per-subcarrier allocation may be
adjusted at Showtime due to rate adaption and bit swapping.
The implementation of this additional mechanism for measuring
bits per subcarrier is not mandatory."
::= { xdsl2Status 1 }
xdsl2LineSegmentEntry OBJECT-TYPE
SYNTAX Xdsl2LineSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineSegmentEntry contains status parameters
of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
Objects in the table refer to NSus and NSds. For G.993.2, the
value of NSus and NSds are, respectively, the indices of the
highest supported upstream and downstream subcarriers according
to the selected implementation profile. For ADSL, NSus is equal
to NSCus-1 and NSds is equal to NSCds-1.
One index of this table is an interface index where the interface
has an ifType of vdsl2(251). A second index of this table is the
transmission direction. A third index identifies the specific
segment of the subcarriers status addressed."
INDEX { ifIndex,
xdsl2LineSegmentDirection,
xdsl2LineSegment }
::= { xdsl2LineSegmentTable 1 }
Xdsl2LineSegmentEntry ::=
SEQUENCE {
xdsl2LineSegmentDirection Xdsl2Direction,
xdsl2LineSegment Unsigned32,
xdsl2LineSegmentBitsAlloc Xdsl2BitsAlloc,
xdsl2LineSegmentRowStatus RowStatus
}
xdsl2LineSegmentDirection OBJECT-TYPE
SYNTAX Xdsl2Direction
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The direction of the subcarrier either
upstream or downstream."
::= { xdsl2LineSegmentEntry 1 }
xdsl2LineSegment OBJECT-TYPE
SYNTAX Unsigned32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The segment of the subcarriers status information
provided by this row.
Status parameters in this table are retrieved in segments.
The first segment of the status information is retrieved with
xdsl2LineSegment=1, the second segment is retrieved with
xdsl2LineSegment=2, and so on. When a status parameter is
retrieved in n segments where n<8) then, for that parameter,
GET operations for the remaining segment numbers (n+1 to 8) will
respond with a zero-length OCTET STRING."
::= { xdsl2LineSegmentEntry 2 }
xdsl2LineSegmentBitsAlloc OBJECT-TYPE
SYNTAX Xdsl2BitsAlloc
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bits allocation per subcarrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream)
subcarriers. When more than 512 subcarriers are supported, the
status information is reported through multiple (up to 8)
segments. The first segment is then used for the first 512
subcarriers. The second segment is used for the subcarriers
512 to 1023 and so on.
The aggregate number of utilized nibbles in the downstream
direction (in all segments) depends on NSds; in the
upstream direction, it depends on NSus.
This value is referred to here as NS. The segment number is in
xdsl2SCStatusSegment.
Nibble i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
segment is set to a value in the range 0 to 15 to indicate that
the respective downstream or upstream subcarrier j
(j=(segement-1)*512+i) has the same amount of bits
allocation."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds)
and paragraph #7.5.1.29.2 (BITSpsus)"
::= { xdsl2LineSegmentEntry 3 }
xdsl2LineSegmentRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status. The SNMP agent will create a row in this table
for storing the results of a measurement performed on the
associated line, if the row does not already exist.
The SNMP manager is not permitted to create rows in this table or
set the row status to 'notInService'. In the first case,
if the SNMP manager tries to create a new row, the SNMP agent
responds with the value 'noCreation' in the error status
field of the response-PDU. In the latter case, the SNMP agent
responds with the value 'wrongValue' in the error status
field of the response-PDU.
The SNMP agent may have limited resources; therefore, if multiple
rows coexist in this table, it may fail to add new rows to this
table or allocate memory resources.
If that occurs, the SNMP agent responds with the value
'noResources' (for the xdsl2LineCmndConfBpscFailReason
object in xdsl2LineTable).
The management system (the operator) may delete rows from this
table according to any scheme. For example, after retrieving
the results.
When the SNMP manager deletes any row in this table, the SNMP
agent MUST delete all rows in this table that have the same
ifIndex value."
::= { xdsl2LineSegmentEntry 4 }
------------------------------------------------
-- xdsl2LineBandTable --
------------------------------------------------
xdsl2LineBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineBandTable contains the, per-band line
status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line.
The parameters in this table are updated at line initialization
time and at Showtime."
::= { xdsl2Line 2 }
xdsl2LineBandEntry OBJECT-TYPE
SYNTAX Xdsl2LineBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface
has an ifType of vdsl2(251). A second index of this table is a
per-band index covering both VDSL2 and ADSL/ADSL2/ADSL2+."
INDEX { ifIndex, xdsl2LineBand }
::= { xdsl2LineBandTable 1 }
Xdsl2LineBandEntry ::=
SEQUENCE {
xdsl2LineBand Xdsl2Band,
xdsl2LineBandStatusLnAtten Unsigned32,
xdsl2LineBandStatusSigAtten Unsigned32,
xdsl2LineBandStatusSnrMargin Integer32
}
xdsl2LineBand OBJECT-TYPE
SYNTAX Xdsl2Band
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the band(s) associated with this line.
For ADSL/ADSL2/ADSL2+, the values 'upstream' and 'downstream'
will always be present.
For VDSL2, a subset of {'us0', 'ds1', 'us1' ... 'ds4', 'us4' }
will always be present, together with rows for
'upstream' and 'downstream', in which only the
xdsl2LineBandStatusSnrMargin object is expected to hold a valid
(average) measurement."
::= { xdsl2LineBandEntry 1 }
xdsl2LineBandStatusLnAtten OBJECT-TYPE
SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Line Attenuation.
When referring to a band in the downstream direction, it is
the measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all
subcarriers of that band during initialization.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all subcarriers of
that band during initialization.
Values range from 0 to 1270 in units of 0.1 dB (physical values
are 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
and paragraph #7.5.1.10 (LATNus)6"
DEFVAL { 2147483646 }
::= { xdsl2LineBandEntry 2 }
xdsl2LineBandStatusSigAtten OBJECT-TYPE
SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal Attenuation.
When referring to a band in the downstream direction, it is
the measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all
subcarriers of that band during Showtime.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all subcarriers of
that band during Showtime.
Values range from 0 to 1270 in units of 0.1 dB (physical values
are 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
and paragraph #7.5.1.12 (SATNus)"
DEFVAL { 2147483646 }
::= { xdsl2LineBandEntry 3 }
xdsl2LineBandStatusSnrMargin OBJECT-TYPE
SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power
received at the xTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that the
BER requirements are met for all bearer channels received at the
xTU. Values range from -640 to 630 in units of 0.1 dB (physical
values are -64 to 63 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the SNR
Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the SNR
Margin measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
and paragraph #7.5.1.14 (SNRMpbds)
and paragraph #7.5.1.16 (SNRMus)
and paragraph #7.5.1.17 (SNRMpbus)"
DEFVAL { 2147483646 }
::= { xdsl2LineBandEntry 4 }
------------------------------------------------
-- xdsl2ChannelStatusTable --
------------------------------------------------
xdsl2ChannelStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ChannelStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ChannelStatusTable contains status
parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel.
This table contains live data from equipment."
::= { xdsl2Status 2 }
xdsl2ChannelStatusEntry OBJECT-TYPE
SYNTAX Xdsl2ChannelStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of a DSL channel. A second index of
this table is the termination unit."
INDEX { ifIndex, xdsl2ChStatusUnit }
::= { xdsl2ChannelStatusTable 1 }
Xdsl2ChannelStatusEntry ::=
SEQUENCE {
xdsl2ChStatusUnit Xdsl2Unit,
xdsl2ChStatusActDataRate Unsigned32,
xdsl2ChStatusPrevDataRate Unsigned32,
xdsl2ChStatusActDelay Unsigned32,
xdsl2ChStatusActInp Unsigned32,
xdsl2ChStatusInpReport Xdsl2ChInpReport,
xdsl2ChStatusNFec Unsigned32,
xdsl2ChStatusRFec Unsigned32,
xdsl2ChStatusLSymb Unsigned32,
xdsl2ChStatusIntlvDepth Unsigned32,
xdsl2ChStatusIntlvBlock Unsigned32,
xdsl2ChStatusLPath Unsigned32,
xdsl2ChStatusAtmStatus Xdsl2ChAtmStatus,
xdsl2ChStatusPtmStatus Xdsl2ChPtmStatus
}
xdsl2ChStatusUnit OBJECT-TYPE
SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The termination unit."
::= { xdsl2ChannelStatusEntry 1 }
xdsl2ChStatusActDataRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual net data rate at which the bearer channel is
operating, if in L0 power management state. In L1 or L2
states, it relates to the previous L0 state. The data rate is
coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.1
(Actual data rate)"
DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 2 }
xdsl2ChStatusPrevDataRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The previous net data rate that the bearer channel was
operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or
power management transitions, excluding transitions between L0
state and L1 or L2 states. The data rate is coded in
bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2
(Previous data rate)"
DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 3 }
xdsl2ChStatusActDelay OBJECT-TYPE
SYNTAX Unsigned32(0..8176)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual one-way interleaving delay introduced by the
PMS-TC in the direction of the bearer channel, if in L0 power
management state. In L1 or L2 states, it relates to the previous
L0 state. It is coded in ms (rounded to the nearest ms)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.3
(Actual interleaving delay)"
DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 4 }
xdsl2ChStatusActInp OBJECT-TYPE
SYNTAX Unsigned32(0..255)
UNITS "0.1 symbols"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual impulse noise protection.
This parameter reports the actual impulse noise protection (INP)
on the bearer channel in the L0 state. In the L1 or L2 state,
the parameter contains the INP in the previous L0 state. For
ADSL, this value is computed according to the formula specified
in the relevant Recommendation based on the actual framing
parameters. For ITU-T Recommendation G.993.2, the method to
report this value is according to the INPREPORT parameter.
The value is coded in fractions of DMT symbols with a
granularity of 0.1 symbols. The range is from 0 to 25.4.
The special value of 255 indicates an ACTINP higher
than 25.4."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.4 (ACTINP)"
DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 5 }
xdsl2ChStatusInpReport OBJECT-TYPE
SYNTAX Xdsl2ChInpReport
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Impulse noise protection reporting mode."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.5.2.5
(INPREPORT)"
DEFVAL { inpComputedUsingFormula }
::= { xdsl2ChannelStatusEntry 6 }
xdsl2ChStatusNFec OBJECT-TYPE
SYNTAX Unsigned32(0..255)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual size of Reed-Solomon codeword.
This parameter reports the actual number of Reed-Solomon
redundancy bytes per codeword used in the latency path in which
the bearer channel is transported. The value is coded in bytes.
It ranges from 0 to 16.
The value 0 indicates no Reed-Solomon coding."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.1 (NFEC)"
DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 7 }
xdsl2ChStatusRFec OBJECT-TYPE
SYNTAX Unsigned32(0..16)
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of Reed-Solomon redundancy bytes.
This parameter reports the actual number of Reed-Solomon
redundancy bytes per codeword used in the latency path in which
the bearer channel is transported. The value is coded in bytes.
It ranges from 0 to 16.
The value 0 indicates no Reed-Solomon coding."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.2 (RFEC)"
DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 8 }
xdsl2ChStatusLSymb OBJECT-TYPE
SYNTAX Unsigned32(0..65535)
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits per symbol.
This parameter reports the actual number of bits per symbol
assigned to the latency path in which the bearer channel is
transported. This value does not include trellis overhead. The
value is coded in bits.
It ranges from 0 to 65535."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.3 (LSYMB)"
DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 9 }
xdsl2ChStatusIntlvDepth OBJECT-TYPE
SYNTAX Unsigned32(1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual interleaving depth.
This parameter reports the actual depth of the interleaver used
in the latency path in which the bearer channel is transported.
The value ranges from 1 to 4096 in steps of 1.
The value 1 indicates no interleaving."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.4 (INTLVDEPTH)"
DEFVAL { 1 }
::= { xdsl2ChannelStatusEntry 10 }
xdsl2ChStatusIntlvBlock OBJECT-TYPE
SYNTAX Unsigned32(4..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual interleaving block length.
This parameter reports the actual block length of the interleaver
used in the latency path in which the bearer channel is
transported.
The value ranges from 4 to 255 in steps of 1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5 (INTLVBLOCK)"
DEFVAL { 4 }
::= { xdsl2ChannelStatusEntry 11 }
xdsl2ChStatusLPath OBJECT-TYPE
SYNTAX Unsigned32(0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual latency path.
This parameter reports the index of the actual latency path in
which the bearer is transported.
The valid values are 0, 1, 2 and 3.
For G.992.1, the FAST path shall be mapped to the latency
index 0, and the INTERLEAVED path shall be mapped to the latency
index 1."
REFERENCE "ITU-T G.997.1 amendment 1, paragraph #7.5.2.7
(LPATH)"
DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 12 }
xdsl2ChStatusAtmStatus OBJECT-TYPE
SYNTAX Xdsl2ChAtmStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current state (existing failures) of the DSL
channel in case its Data Path is ATM. This is a bitmap of
possible conditions.
In case the channel is not of ATM Data Path, the object is set
to '0'."
REFERENCE "ITU-T G.997.1, paragraph #7.1.4
(ATM data path failures)"
DEFVAL { { noDefect } }
::= { xdsl2ChannelStatusEntry 13 }
xdsl2ChStatusPtmStatus OBJECT-TYPE
SYNTAX Xdsl2ChPtmStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current state (existing failures) of the DSL
channel in case its Data Path is PTM (Packet Transfer Mode).
This is a bitmap of possible conditions.
In case the channel is not of PTM Data Path, the object is set
to '0'."
REFERENCE "ITU-T G.997.1, paragraph #7.1.5
(PTM Data Path failures)"
DEFVAL { { noDefect } }
::= { xdsl2ChannelStatusEntry 14 }
------------------------------------------------
-- Scalars that relate to the SC Status Tables
------------------------------------------------
xdsl2ScalarSCMaxInterfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value determines the maximum number of
interfaces supported by xdsl2SCStatusTable,
xdsl2SCStatusBandTable, and xdsl2SCStatusSegmentTable."
::= { xdsl2ScalarSC 1 }
xdsl2ScalarSCAvailInterfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value determines the currently available number of
interfaces listed in xdsl2SCStatusTable,
xdsl2SCStatusBandTable, and xdsl2SCStatusSegmentTable."
::= { xdsl2ScalarSC 2 }
------------------------------------------------
-- xdsl2SCStatusTable --
------------------------------------------------
xdsl2SCStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2SCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2SCStatusTable contains
status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that
provide information about the size of parameters in
xdsl2SCStatusSegmentTable.
The parameters in this table MUST be updated after a loop
diagnostic procedure, MAY be updated after a line
initialization, and MAY be updated at Showtime."
::= { xdsl2Status 3 }
xdsl2SCStatusEntry OBJECT-TYPE
SYNTAX Xdsl2SCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of this
table is the transmission direction."
INDEX { ifIndex, xdsl2SCStatusDirection }
::= { xdsl2SCStatusTable 1 }
Xdsl2SCStatusEntry ::=
SEQUENCE {
xdsl2SCStatusDirection Xdsl2Direction,
xdsl2SCStatusLinScale Unsigned32,
xdsl2SCStatusLinScGroupSize Unsigned32,
xdsl2SCStatusLogMt Unsigned32,
xdsl2SCStatusLogScGroupSize Unsigned32,
xdsl2SCStatusQlnMt Unsigned32,
xdsl2SCStatusQlnScGroupSize Unsigned32,
xdsl2SCStatusSnrMtime Unsigned32,
xdsl2SCStatusSnrScGroupSize Unsigned32,
xdsl2SCStatusAttainableRate Unsigned32,
xdsl2SCStatusRowStatus RowStatus
}
xdsl2SCStatusDirection OBJECT-TYPE
SYNTAX Xdsl2Direction
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The direction of the subcarrier either
upstream or downstream."
::= { xdsl2SCStatusEntry 1 }
xdsl2SCStatusLinScale OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The scale factor to be applied to the H(f) linear
representation values for the respective transmission direction.
This parameter is only available after a loop diagnostic
procedure. It is represented as an unsigned integer in the range
from 1 to 2^16-1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.1 (HLINSCds)
and paragraph #7.5.1.26.7 (HLINSCus)"
::= { xdsl2SCStatusEntry 2 }
xdsl2SCStatusLinScGroupSize OBJECT-TYPE
SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of subcarriers per group used to report the H(f)
linear representation values for the respective transmission
direction. The valid values are 1, 2, 4, and 8. For ADSL, this
parameter is equal to one and, for VDSL2, it is equal to the size
of a subcarrier group used to compute these parameters.
This parameter is only available after a loop diagnostic
procedure."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.2 (HLINGds)
and paragraph #7.5.1.26.8 (HLINGus)"
::= { xdsl2SCStatusEntry 3 }
xdsl2SCStatusLogMt OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter contains the number of symbols used to
measure the Hlog(f) values. It is represented as an unsigned
integer in the range from 1 to 2^16-1.
After a loop diagnostic procedure, this parameter shall contain
the number of symbols used to measure the Hlog(f). It should
correspond to the value specified in the Recommendation (e.g., the
number of symbols in 1 s time interval for ITU-T Recommendation.
G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds)
and paragraph #7.5.1.26.10 (HLOGMTus)"
::= { xdsl2SCStatusEntry 4 }
xdsl2SCStatusLogScGroupSize OBJECT-TYPE
SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of subcarriers per group used to report the H(f)
logarithmic representation values for the respective
transmission direction. The valid values are 1, 2, 4, and 8.
For ADSL, this parameter is equal to 1, and for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.5 (HLOGGds)
and paragraph #7.5.1.26.11 (HLOGGus)"
::= { xdsl2SCStatusEntry 5 }
xdsl2SCStatusQlnMt OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter contains the number of symbols used to
measure the QLN(f) values. It is an unsigned integer in the range
from 1 to 2^16-1. After a loop diagnostic procedure, this
parameter shall contain the number of symbols used to measure the
QLN(f). It should correspond to the value specified in the
Recommendation (e.g., the number of symbols in 1 s time interval
for ITU-T Recommendation G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.1 (QLNMTds)
and paragraph #7.5.1.27.4 (QLNMTus)"
::= { xdsl2SCStatusEntry 6 }
xdsl2SCStatusQlnScGroupSize OBJECT-TYPE
SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of subcarriers per group used to report the Quiet
Line Noise values for the respective transmission direction.
The valid values are 1, 2, 4, and 8.
For ADSL, this parameter is equal to 1, and for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.2 (QLNGds)
and paragraph #7.5.1.27.5 (QLNGus)"
::= { xdsl2SCStatusEntry 7 }
xdsl2SCStatusSnrMtime OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "symbols"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter contains the number of symbols used to measure
the SNR(f) values. It is an unsigned integer in the range from 1
to 2^16-1. After a loop diagnostic procedure, this parameter
shall contain the number of symbols used to measure the SNR(f).
It should correspond to the value specified in the Recommendation
(e.g., the number of symbols in 1 s time interval for ITU-T
Recommendation G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.1 (SNRMTds)
and paragraph #7.5.1.28.4 (SNRMTus)"
::= { xdsl2SCStatusEntry 8 }
xdsl2SCStatusSnrScGroupSize OBJECT-TYPE
SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of subcarriers per group used to report the SNR values
on the respective transmission direction.
The valid values are 1, 2, 4, and 8.
For ADSL, this parameter is equal to 1, and for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.2 (SNRGds)
and paragraph #7.5.1.28.5 (SNRGus)"
::= { xdsl2SCStatusEntry 9 }
xdsl2SCStatusAttainableRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Attainable Data Rate. The maximum net data rate
currently attainable by the xTU-C transmitter and xTU-R receiver
(when referring to downstream direction) or by the xTU-R
transmitter and xTU-C receiver (when referring to upstream
direction). Value is coded in bits/s.
This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once the DELT
process is over, the parameter no longer changes until the row is
deleted or a new DELT process is initiated."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.19 (ATTNDRds)
and paragraph #7.5.1.20 (ATTNDRus)"
::= { xdsl2SCStatusEntry 10 }
xdsl2SCStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status. The SNMP agent will create a row in this table
for storing the results of a DELT performed on the associated
line, if the row does not already exist.
When a row is created in this table, the SNMP agent should also
create corresponding rows in the tables xdsl2SCStatusBandTable and
xdsl2SCStatusSegmentTable.
The SNMP manager is not permitted to create rows in this table or
set the row status to 'notInService'. In the first case,
if the SNMP manager tries to create a new row, the SNMP agent
responds with the value 'noCreation' in the error status
field of the response-PDU. In the latter case the SNMP agent
responds with the value 'wrongValue' in the error status
field of the response-PDU.
When a row is deleted in this table, the SNMP agent should also
delete corresponding rows in the tables xdsl2SCStatusBandTable and
xdsl2SCStatusSegmentTable.
The SNMP agent may have limited resources; therefore, if multiple
rows coexist in this table, it may fail to add new rows to this
table or allocate memory resources for a new DELT process. If
that occurs, the SNMP agent responds with either the value
'tableFull' or the value 'noResources' (for
the xdsl2LineCmndConfLdsfFailReason object in xdsl2LineTable).
The management system (the operator) may delete rows from this
table according to any scheme. For example, after retrieving the
results."
::= { xdsl2SCStatusEntry 11 }
------------------------------------------------
-- xdsl2SCStatusBandTable --
------------------------------------------------
xdsl2SCStatusBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2SCStatusBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2SCStatusBandTable contains subcarrier status
parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that are grouped per-
band.
For ADSL/ADSL2/ADSL2+, there is a single upstream band and a
single downstream band. For VDSL2, there are several downstream
bands and several upstream bands.
The parameters in this table are only available after a loop
diagnostic procedure."
::= { xdsl2Status 4 }
xdsl2SCStatusBandEntry OBJECT-TYPE
SYNTAX Xdsl2SCStatusBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface
has an ifType of vdsl2(251). A second index of this table is the
transmission band."
INDEX { ifIndex, xdsl2SCStatusBand }
::= { xdsl2SCStatusBandTable 1 }
Xdsl2SCStatusBandEntry ::=
SEQUENCE {
xdsl2SCStatusBand Xdsl2Band,
xdsl2SCStatusBandLnAtten Unsigned32,
xdsl2SCStatusBandSigAtten Unsigned32
}
xdsl2SCStatusBand OBJECT-TYPE
SYNTAX Xdsl2Band
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The transmission band."
::= { xdsl2SCStatusBandEntry 1 }
xdsl2SCStatusBandLnAtten OBJECT-TYPE
SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When referring to a band in the downstream direction, it is
the measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all
subcarriers during diagnostics mode.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all subcarriers
during diagnostics mode.
It ranges from 0 to 1270 units of 0.1 dB (physical values are 0
to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable.
This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once the DELT
process is over, the parameter no longer changes until the row is
deleted or a new DELT process is initiated."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
and paragraph #7.5.1.10 (LATNus)"
DEFVAL { 2147483646 }
::= { xdsl2SCStatusBandEntry 2 }
xdsl2SCStatusBandSigAtten OBJECT-TYPE
SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all subcarriers
during Showtime after the diagnostics mode.
When referring to the upstream direction, it is the measured
difference in the total power transmitted by the xTU-R and the
total power received by the xTU-C over all subcarriers during
Showtime after the diagnostics mode.
It ranges from 0 to 1270 units of 0.1 dB (physical values are 0
to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable.
This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once the DELT
process is over, the parameter no longer changes until the row is
deleted or a new DELT process is initiated."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
and paragraph #7.5.1.12 (SATNus)"
DEFVAL { 2147483646 }
::= { xdsl2SCStatusBandEntry 3 }
------------------------------------------------
-- xdsl2SCStatusSegmentTable --
------------------------------------------------
xdsl2SCStatusSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2SCStatusSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2SCStatusSegmentTable contains status
parameters of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
Several objects in the table refer to NSus and NSds. For
G.993.2, the value of NSus and NSds are, respectively, the
indices of the highest supported upstream and downstream
subcarriers according to the selected implementation profile.
For ADSL, NSus is equal to NSCus-1 and NSds is equal to NSCds-1.
The parameters in this table MUST be updated after a loop
diagnostic procedure and MAY be updated after a line
initialization and MAY be updated at Showtime."
::= { xdsl2Status 5 }
xdsl2SCStatusSegmentEntry OBJECT-TYPE
SYNTAX Xdsl2SCStatusSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of this
table is the transmission direction. A third index identifies
the specific segment of the subcarriers status addressed."
INDEX { ifIndex,
xdsl2SCStatusDirection,
xdsl2SCStatusSegment }
::= { xdsl2SCStatusSegmentTable 1 }
Xdsl2SCStatusSegmentEntry ::=
SEQUENCE {
xdsl2SCStatusSegment Unsigned32,
xdsl2SCStatusSegmentLinReal OCTET STRING,
xdsl2SCStatusSegmentLinImg OCTET STRING,
xdsl2SCStatusSegmentLog OCTET STRING,
xdsl2SCStatusSegmentQln OCTET STRING,
xdsl2SCStatusSegmentSnr OCTET STRING,
xdsl2SCStatusSegmentBitsAlloc Xdsl2BitsAlloc,
xdsl2SCStatusSegmentGainAlloc OCTET STRING
}
xdsl2SCStatusSegment OBJECT-TYPE
SYNTAX Unsigned32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The segment of the subcarriers status information provided by
this row.
Several status parameters in this table are retrieved in segments.
The first segment of the status information is retrieved with
xdsl2SCStatusSegment=1, the second segment is retrieved with
xdsl2SCStatusSegment=2, and so on. When any status parameter is
retrieved in n segments where n<8), then for that parameter,
GET operations for the remaining segment numbers (n+1 to 8) will
respond with a zero-length OCTET STRING."
::= { xdsl2SCStatusSegmentEntry 1 }
xdsl2SCStatusSegmentLinReal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 complex H(f) linear representation
values in linear scale for the respective transmission direction.
It is designed to support up to 512 (downstream) subcarrier
groups and can be retrieved in a single segment.
The number of utilized values in the downstream direction depends
on NSds; in the upstream direction, it depends on NSus. This
value is referred to here as NS.
Each array entry represents the real component (referred to here
as a(i)) of Hlin(f = i*Df) value for a particular subcarrier
group index i (0 <= i <= NS).
Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
where scale is xdsl2SCStatusLinScale and a(i) and b(i)
(provided by the xdsl2SCStatusSegmentLinImg object) are in the
range (-2^15+1) to (+2^15-1).
A special value a(i)=b(i)= -2^15 indicates that no measurement
could be done for the subcarrier group because it is out of the
passband or that the attenuation is out of range to be
represented. This parameter is only available after a loop
diagnostic procedure.
Each value in this array is 16 bits wide and is stored in big
endian format."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds)
and paragraph #7.5.1.26.9 (HLINpsus)"
::= { xdsl2SCStatusSegmentEntry 2 }
xdsl2SCStatusSegmentLinImg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 complex H(f) linear representation
values in linear scale for the respective transmission direction.
It is designed to support up to 512 (downstream) subcarrier
groups and can be retrieved in a single segment.
The number of utilized values in the downstream direction depends
on NSds; in the upstream direction, it depends on NSus. This
value is referred to here as NS.
Each array entry represents the imaginary component (referred to
here as b(i)) of Hlin(f = i*Df) value for a particular
subcarrier group index i (0 <= i <= NS).
Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
where scale is xdsl2SCStatusLinScale and a(i) (provided by the
xdsl2SCStatusSegmentLinReal object) and b(i) are in the range
(-2^15+1) to (+2^15-1).
A special value a(i)=b(i)= -2^15 indicates that no measurement
could be done for the subcarrier group because it is out of the
passband or that the attenuation is out of range to be
represented. This parameter is only available after a loop
diagnostic procedure.
Each value in this array is 16 bits wide and is stored in big
endian format."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds)
and paragraph #7.5.1.26.9 (HLINpsus)"
::= { xdsl2SCStatusSegmentEntry 3 }
xdsl2SCStatusSegmentLog OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 real H(f) logarithmic representation
values in dB for the respective transmission direction. It is
designed to support up to 512 (downstream) subcarrier groups
and can be retrieved in a single segment.
The number of utilized values in the downstream direction depends
on NSds; in the upstream direction, it depends on NSus. This
value is referred to here as NS.
Each array entry represents the real Hlog(f = i*Df) value for a
particular subcarrier group index i, (0 <= i <= NS).
The real Hlog(f) value is represented as (6-m(i)/10), with m(i)
in the range 0 to 1022. A special value m=1023 indicates that
no measurement could be done for the subcarrier group because
it is out of the passband or that the attenuation is out of
range to be represented. This parameter is applicable in loop
diagnostic procedure and initialization.
Each value in this array is 16 bits wide and is stored in big
endian format."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.6 (HLOGpsds)
and paragraph #7.5.1.26.12 (HLOGpsus)"
::= { xdsl2SCStatusSegmentEntry 4 }
xdsl2SCStatusSegmentQln OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
UNITS "dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 real Quiet Line Noise values in dBm/Hz
for the respective transmission direction. It is designed for up
to 512 (downstream) subcarrier groups and can be retrieved in a
single segment.
The number of utilized values in the downstream direction depends
on NSds; in the upstream direction, it depends on NSus. This
value is referred to here as NS.
Each array entry represents the QLN(f = i*Df) value for a
particular subcarrier index i, (0 <= i <= NS).
The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range
0 to 254. A special value n(i)=255 indicates that no measurement
could be done for the subcarrier group because it is out of the
passband or that the noise PSD is out of range to be represented.
This parameter is applicable in loop diagnostic procedure and
initialization. Each value in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.3 (QLNpsds)
and paragraph #7.5.1.27.6 (QLNpsus)"
::= { xdsl2SCStatusSegmentEntry 5 }
xdsl2SCStatusSegmentSnr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
UNITS "0.5 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNR Margin per subcarrier group, expressing the ratio
between the received signal power and received noise power per
subscriber group. It is an array of 512 octets, designed for
supporting up to 512 (downstream) subcarrier groups and can be
retrieved in a single segment.
The number of utilized octets in the downstream direction depends
on NSds; in the upstream direction, it depends on NSus. This
value is referred to here as NS.
Octet i (0 <= i <= NS) is set to a value in the range 0 to
254 to indicate that the respective downstream or upstream
subcarrier group i has an SNR of:
(-32 + xdsl2SCStatusSegmentSnr(i)/2) in dB (i.e., -32 to 95 dB).
The special value 255 means that no measurement could be done for
the subcarrier group because it is out of the PSD mask passband or
that the noise PSD is out of range to be represented. Each value
in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.3 (SNRpsds)
and paragraph #7.5.1.28.6 (SNRpsus)"
::= { xdsl2SCStatusSegmentEntry 6 }
xdsl2SCStatusSegmentBitsAlloc OBJECT-TYPE
SYNTAX Xdsl2BitsAlloc
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bits allocation per subcarrier. An array of 256 octets
(512 nibbles) designed for supporting up to 512 (downstream)
subcarriers. When more than 512 subcarriers are supported, the
status information is reported through multiple (up to 8)
segments. The first segment is then used for the first 512
subcarriers. The second segment is used for the subcarriers
512 to 1023 and so on.
The aggregate number of utilized nibbles in the downstream
direction (in all segments) depends on NSds; in the upstream
direction, it depends on NSus.
This value is referred to here as NS. The segment number is in
xdsl2SCStatusSegment.
Nibble i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
segment is set to a value in the range 0 to 15 to indicate that
the respective downstream or upstream subcarrier j
(j=(segement-1)*512+i) has the same amount of bits
allocation."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds)
and paragraph #7.5.1.29.2 (BITSpsus)"
::= { xdsl2SCStatusSegmentEntry 7 }
xdsl2SCStatusSegmentGainAlloc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gain allocation per subcarrier. An array of 512 16-bit
values, designed for supporting up to 512 (downstream)
subcarriers. When more then 512 subcarriers are supported, the
status information is reported through multiple (up to 8)
segments. The first segment is then used for the first 512
subcarriers. The second segment is used for the subcarriers 512
to 1023 and so on.
The aggregate number of utilized octets in the downstream
direction depends on NSds; in the upstream direction, it depends
on NSus. This value is referred to here as NS. The segment
number is in xdsl2SCStatusSegment.
Value i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
segment is set to a value in the range 0 to 4093 to indicate that
the respective downstream or upstream subcarrier j
(j=(segement-1)*512+i) has the same amount of gain value.
The gain value is represented as a multiple of 1/512 on a linear
scale. Each value in this array is 16 bits wide and is stored in
big endian format."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.3 (GAINSpsds)
and paragraph #7.5.1.29.4 (GAINSpsus)"
::= { xdsl2SCStatusSegmentEntry 8 }
------------------------------------------------
-- xdsl2LineInventoryTable --
------------------------------------------------
xdsl2LineInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineInventoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineInventoryTable contains an inventory of the
DSL termination unit."
::= { xdsl2Inventory 1 }
xdsl2LineInventoryEntry OBJECT-TYPE
SYNTAX Xdsl2LineInventoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface
has an ifType of vdsl2(251). A second index of this table is the
termination unit."
INDEX { ifIndex, xdsl2LInvUnit }
::= { xdsl2LineInventoryTable 1 }
Xdsl2LineInventoryEntry ::=
SEQUENCE {
xdsl2LInvUnit Xdsl2Unit,
xdsl2LInvG994VendorId OCTET STRING,
xdsl2LInvSystemVendorId OCTET STRING,
xdsl2LInvVersionNumber OCTET STRING,
xdsl2LInvSerialNumber OCTET STRING,
xdsl2LInvSelfTestResult Unsigned32,
xdsl2LInvTransmissionCapabilities Xdsl2TransmissionModeType
}
xdsl2LInvUnit OBJECT-TYPE
SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The termination unit."
::= { xdsl2LineInventoryEntry 1 }
xdsl2LInvG994VendorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ADSL Transceiver Unit (ATU) G.994.1 Vendor ID as
inserted in the G.994.1 CL/CLR message.
It consists of 8 binary octets, including a country
code followed by a (regionally allocated) provider code, as
defined in Recommendation T.35."
REFERENCE "ITU-T G.997.1, paragraph #7.4.1-7.4.2"
::= { xdsl2LineInventoryEntry 2 }
xdsl2LInvSystemVendorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATU System Vendor ID (identifies the xTU system
integrator) as inserted in the Overhead Messages (both xTUs for
G.992.3, G.992.4, G.992.5, and G.993.2) or in the Embedded
Operations Channel (xTU-R in G.992.1 and G.992.2).
It consists of 8 binary octets, with same format as used for
Xdsl2InvG994VendorId."
REFERENCE "ITU-T G.997.1, paragraph #7.4.3-7.4.4"
::= { xdsl2LineInventoryEntry 3 }
xdsl2LInvVersionNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The xTU version number (vendor-specific information) as
inserted in the Overhead Messages (both xTUs for G.992.3,
G.992.4, G.992.5, and G.993.2) or in the Embedded Operations
Channel (xTU-R in G.992.1 and G.992.2). It consists of up to 16
binary octets."
REFERENCE "ITU-T G.997.1, paragraph #7.4.5-7.4.6"
::= { xdsl2LineInventoryEntry 4 }
xdsl2LInvSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The xTU serial number (vendor-specific information) as
inserted in the Overhead Messages (both xTUs for G.992.3,
G.992.4, G.992.5, and G.993.2) or in the Embedded Operations
Channel (xTU-R in G.992.1 and G.992.2). It is vendor-specific
information consisting of up to 32 ASCII characters."
REFERENCE "ITU-T G.997.1, paragraph #7.4.7-7.4.8"
::= { xdsl2LineInventoryEntry 5 }
xdsl2LInvSelfTestResult OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The xTU self-test result, coded as a 32-bit value. The
most significant octet of the result is '0' if the
self-test passed, and '1' if the self-test failed. The
interpretation of the other octets is vendor discretionary."
REFERENCE "ITU-T G.997.1, paragraph #7.4.9-7.4.10"
DEFVAL { 0 }
::= { xdsl2LineInventoryEntry 6 }
xdsl2LInvTransmissionCapabilities OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The xTU transmission system capability list of the different
coding types. It is coded in a bitmap representation with 1 or
more bits set. A bit set to '1' means that the xTU
supports the respective coding. The value may be derived from
the handshaking procedures defined in G.994.1. A set of xDSL
line transmission modes, with one bit per mode."
REFERENCE "ITU-T G.997.1, paragraph #7.4.11-7.4.12"
::= { xdsl2LineInventoryEntry 7 }
------------------------------------------------
-- xdsl2LineConfTemplateTable --
------------------------------------------------
xdsl2LineConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineConfTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineConfTemplateTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ line configuration templates.
Note that this table is also used to configure the number of
bearer channels.
When the number of bearer channels is increased, the SNMP agent
SHOULD create rows in all tables indexed by a channel index.
When the number of bearer channels is decreased, the SNMP agent
SHOULD delete rows in all tables indexed by a channel index.
For example, if the value of xdsl2LConfTempChan4ConfProfile is
set to a non-null value, then rows SHOULD be created in
xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other tables
indexed by a channel index.
For example, if the value of xdsl2LConfTempChan2ConfProfile is
set to a null value, then rows SHOULD be deleted in
xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other
tables indexed by a channel index.
Entries in this table MUST be maintained in a persistent
manner."
::= { xdsl2ProfileLine 1 }
xdsl2LineConfTemplateEntry OBJECT-TYPE
SYNTAX Xdsl2LineConfTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A default template with an index of 'DEFVAL' will always
exist, and its parameters will be set to vendor-specific values,
unless otherwise specified in this document."
INDEX { xdsl2LConfTempTemplateName }
::= { xdsl2LineConfTemplateTable 1 }
Xdsl2LineConfTemplateEntry ::=
SEQUENCE {
xdsl2LConfTempTemplateName SnmpAdminString,
xdsl2LConfTempLineProfile SnmpAdminString,
xdsl2LConfTempChan1ConfProfile SnmpAdminString,
xdsl2LConfTempChan1RaRatioDs Unsigned32,
xdsl2LConfTempChan1RaRatioUs Unsigned32,
xdsl2LConfTempChan2ConfProfile SnmpAdminString,
xdsl2LConfTempChan2RaRatioDs Unsigned32,
xdsl2LConfTempChan2RaRatioUs Unsigned32,
xdsl2LConfTempChan3ConfProfile SnmpAdminString,
xdsl2LConfTempChan3RaRatioDs Unsigned32,
xdsl2LConfTempChan3RaRatioUs Unsigned32,
xdsl2LConfTempChan4ConfProfile SnmpAdminString,
xdsl2LConfTempChan4RaRatioDs Unsigned32,
xdsl2LConfTempChan4RaRatioUs Unsigned32,
xdsl2LConfTempRowStatus RowStatus
}
xdsl2LConfTempTemplateName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
REFERENCE "DSL Forum TR-129, paragraph #5.4"
::= { xdsl2LineConfTemplateEntry 1 }
xdsl2LConfTempLineProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the
VDSL2/ADSL/ADSL2 and ADSL2+ line configuration Profile Table
(xdsl2LineConfProfTable) that applies for this DSL line."
REFERENCE "DSL Forum TR-129, paragraph #5.4"
DEFVAL { "DEFVAL" }
::= { xdsl2LineConfTemplateEntry 2 }
xdsl2LConfTempChan1ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the VDSL2/
ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
(xdsl2ChConfProfileTable) that applies to DSL bearer channel #1.
The channel profile name specified here MUST match the name of an
existing row in the xdsl2ChConfProfileTable table."
DEFVAL { "DEFVAL" }
::= { xdsl2LineConfTemplateEntry 3 }
xdsl2LConfTempChan1RaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the available data
rate in excess of the Minimum Data Rate, summed over all bearer
channels.
Also, the 100 - xdsl2LConfTempChan1RaRatioDs is the ratio of
excess data rate to be assigned to all other bearer channels on
Downstream direction. The sum of rate adaptation ratios over all
bearers on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 100 }
::= { xdsl2LineConfTemplateEntry 4 }
xdsl2LConfTempChan1RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #1 when performing
rate adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels.
Also, the 100 - xdsl2LConfTempChan1RaRatioUs is the ratio of
excess data rate to be assigned to all other bearer channels on
Upstream direction. The sum of rate adaptation ratios over all
bearers on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 100 }
::= { xdsl2LineConfTemplateEntry 5 }
xdsl2LConfTempChan2ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the VDSL2/
ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
(xdsl2ChConfProfileTable) that applies to DSL bearer channel #2.
If the channel is unused, then the object is set to a zero-length
string.
This object may be set to a zero-length string only if
xdsl2LConfTempChan3ConfProfile contains a zero-length
string."
DEFVAL { "" }
::= { xdsl2LineConfTemplateEntry 6 }
xdsl2LConfTempChan2RaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #2 when performing
rate adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels.
Also, the 100 - xdsl2LConfTempChan2RaRatioDs is the ratio of
excess data rate to be assigned to all other bearer channels on
Downstream direction. The sum of rate adaptation ratios over all
bearers on the same direction shall be equal to
100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 7 }
xdsl2LConfTempChan2RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #2 when performing
rate adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels.
Also, the 100 - xdsl2LConfTempChan2RaRatioUs is the ratio of
excess data rate to be assigned to all other bearer channels on
Upstream direction. The sum of rate adaptation ratios over all
bearers on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 8 }
xdsl2LConfTempChan3ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the VDSL2/
ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
(xdsl2ChConfProfileTable) that applies to DSL bearer channel #3.
If the channel is unused, then the object is set to a zero-length
string.
This object may be set to a zero-length string only if
xdsl2LConfTempChan4ConfProfile contains a zero-length string.
This object may be set to a non-zero-length string only if
xdsl2LConfTempChan2ConfProfile contains a non-zero-length
string."
DEFVAL { "" }
::= { xdsl2LineConfTemplateEntry 9 }
xdsl2LConfTempChan3RaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #3 when performing
rate adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels.
Also, the 100 - xdsl2LConfTempChan3RaRatioDs is the ratio of
excess data rate to be assigned to all other bearer channels on
Downstream direction. The sum of rate adaptation ratios over all
bearers on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 10 }
xdsl2LConfTempChan3RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #3 when performing
rate adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels.
Also, the 100 - xdsl2LConfTempChan3RaRatioUs is the ratio of
excess data rate to be assigned to all other bearer channels on
Upstream direction. The sum of rate adaptation ratios over all
bearers on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 11 }
xdsl2LConfTempChan4ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the VDSL2/
ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
(xdsl2ChConfProfileTable) that applies to DSL bearer channel #4.
If the channel is unused, then the object is set to a zero-length
string.
This object may be set to a non-zero-length string only if
xdsl2LConfTempChan3ConfProfile contains a non-zero-length
string."
DEFVAL { "" }
::= { xdsl2LineConfTemplateEntry 12 }
xdsl2LConfTempChan4RaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #4 when performing rate
adaptation on Downstream. The ratio refers to the available data
rate in excess of the Minimum Data Rate, summed over all bearer
channels.
Also, the 100 - xdsl2LConfTempChan4RaRatioDs is the ratio of
excess data rate to be assigned to all other bearer channels.
The sum of rate adaptation ratios over all bearers on the same
direction shall sum to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 13 }
xdsl2LConfTempChan4RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #4 when performing rate
adaptation on Upstream. The ratio refers to the available data
rate in excess of the Minimum Data Rate, summed over all bearer
channels.
Also, the 100 - xdsl2LConfTempChan4RaRatioUs is the ratio of
excess data rate to be assigned to all other bearer channels.
The sum of rate adaptation ratios over all bearers on the same
direction shall sum to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 14 }
xdsl2LConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A template is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by
setting this object to 'destroy' or 'notInService'), it MUST be
first unreferenced from all associated lines.
A row in this table is said to be unreferenced when there is no
instance of xdsl2LineConfTemplate or
xdsl2LineConfFallbackTemplate that refers to the row."
::= { xdsl2LineConfTemplateEntry 15 }
------------------------------------------
-- xdsl2LineConfProfTable --
------------------------------------------
xdsl2LineConfProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ line configuration profiles.
Entries in this table MUST be maintained in a persistent
manner."
::= { xdsl2ProfileLine 2 }
xdsl2LineConfProfEntry OBJECT-TYPE
SYNTAX Xdsl2LineConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A default profile with an index of 'DEFVAL' will always
exist, and its parameters will be set to vendor-specific values,
unless otherwise specified in this document."
INDEX { xdsl2LConfProfProfileName }
::= { xdsl2LineConfProfTable 1 }
Xdsl2LineConfProfEntry ::=
SEQUENCE {
xdsl2LConfProfProfileName SnmpAdminString,
xdsl2LConfProfScMaskDs Xdsl2ScMaskDs,
xdsl2LConfProfScMaskUs Xdsl2ScMaskUs,
xdsl2LConfProfVdsl2CarMask Xdsl2CarMask,
xdsl2LConfProfRfiBands Xdsl2RfiBands,
xdsl2LConfProfRaModeDs Xdsl2RaMode,
xdsl2LConfProfRaModeUs Xdsl2RaMode,
xdsl2LConfProfRaUsNrmDs Unsigned32,
xdsl2LConfProfRaUsNrmUs Unsigned32,
xdsl2LConfProfRaUsTimeDs Unsigned32,
xdsl2LConfProfRaUsTimeUs Unsigned32,
xdsl2LConfProfRaDsNrmDs Unsigned32,
xdsl2LConfProfRaDsNrmUs Unsigned32,
xdsl2LConfProfRaDsTimeDs Unsigned32,
xdsl2LConfProfRaDsTimeUs Unsigned32,
xdsl2LConfProfTargetSnrmDs Unsigned32,
xdsl2LConfProfTargetSnrmUs Unsigned32,
xdsl2LConfProfMaxSnrmDs Unsigned32,
xdsl2LConfProfMaxSnrmUs Unsigned32,
xdsl2LConfProfMinSnrmDs Unsigned32,
xdsl2LConfProfMinSnrmUs Unsigned32,
xdsl2LConfProfMsgMinUs Unsigned32,
xdsl2LConfProfMsgMinDs Unsigned32,
xdsl2LConfProfCeFlag Xdsl2LineCeFlag,
xdsl2LConfProfSnrModeDs Xdsl2LineSnrMode,
xdsl2LConfProfSnrModeUs Xdsl2LineSnrMode,
xdsl2LConfProfTxRefVnDs Xdsl2LineTxRefVnDs,
xdsl2LConfProfTxRefVnUs Xdsl2LineTxRefVnUs,
xdsl2LConfProfXtuTransSysEna Xdsl2TransmissionModeType,
xdsl2LConfProfPmMode Xdsl2LinePmMode,
xdsl2LConfProfL0Time Unsigned32,
xdsl2LConfProfL2Time Unsigned32,
xdsl2LConfProfL2Atpr Unsigned32,
xdsl2LConfProfL2Atprt Unsigned32,
xdsl2LConfProfProfiles Xdsl2LineProfiles,
xdsl2LConfProfDpboEPsd Xdsl2PsdMaskDs,
xdsl2LConfProfDpboEsEL Unsigned32,
xdsl2LConfProfDpboEsCableModelA Unsigned32,
xdsl2LConfProfDpboEsCableModelB Unsigned32,
xdsl2LConfProfDpboEsCableModelC Unsigned32,
xdsl2LConfProfDpboMus Unsigned32,
xdsl2LConfProfDpboFMin Unsigned32,
xdsl2LConfProfDpboFMax Unsigned32,
xdsl2LConfProfUpboKL Unsigned32,
xdsl2LConfProfUpboKLF Xdsl2UpboKLF,
xdsl2LConfProfUs0Mask Xdsl2LineUs0Mask,
xdsl2LConfProfForceInp TruthValue,
xdsl2LConfProfRowStatus RowStatus
}
xdsl2LConfProfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { xdsl2LineConfProfEntry 1 }
xdsl2LConfProfScMaskDs OBJECT-TYPE
SYNTAX Xdsl2ScMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Subcarrier mask. A bitmap of 4096 bits that allows masking
up to 4096 downstream subcarriers. If bit i (0 <= i <
NSCds) is set to '1', the respective downstream
subcarrier is masked, and if set to '0', the respective
subcarrier is unmasked.
Note that there should always be unmasked subcarriers (i.e.,
this object cannot be all 1's).
Also note that if NSCds < 4096, all bits i
(NSCds < i <= 4096) should be set to '1'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.6 (CARMASKds)"
::= { xdsl2LineConfProfEntry 2 }
xdsl2LConfProfScMaskUs OBJECT-TYPE
SYNTAX Xdsl2ScMaskUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Subcarrier mask. A bitmap of 4096 bits that allows masking
up to 4096 upstream subcarriers. If bit i (0 <= i < NSCus)
is set to '1', the respective upstream subcarrier is
masked, and if set to '0', the respective subcarrier
is unmasked.
Note that there should always be unmasked subcarriers (i.e.,
this object cannot be all 1's).
Also note that if NSCus < 4096, all bits i
(NSCus < i <= 4096) should be set to '1'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.7 (CARMASKus)"
::= { xdsl2LineConfProfEntry 3 }
xdsl2LConfProfVdsl2CarMask OBJECT-TYPE
SYNTAX Xdsl2CarMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VDSL2-specific subcarrier mask. This configuration
parameter defines the restrictions, additional to the band plan,
to determine the set of subcarriers allowed for transmission in
both the upstream and downstream directions.
The parameter shall describe the not masked subcarriers as one or
more frequency bands. Each band is represented by start and stop
subcarrier indices with a subcarrier spacing of 4.3125 kHz. The
valid range of subcarrier indices runs from 0 to at least the
index of the highest allowed subcarrier in both transmission
directions among all profiles enabled by the parameter
xdsl2LConfProfProfiles.
Up to 32 bands may be specified. Other subcarriers shall be
masked."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.8 (VDSL2-
CARMASK)"
::= { xdsl2LineConfProfEntry 4 }
xdsl2LConfProfRfiBands OBJECT-TYPE
SYNTAX Xdsl2RfiBands
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For ITU-T Recommendation G.992.5, this configuration
parameter defines
the subset of downstream PSD mask breakpoints, as specified in
xdsl2LConfProfPsdMaskDs (PSDMASKds), that shall be used to notch
an RFI band. This subset consists of pairs of consecutive
subcarrier indices belonging to breakpoints: [ti; ti + 1],
corresponding to the low level of the notch.
The specific interpolation around these points is defined in the
relevant Recommendations (e.g., ITU-T Recommendation G.992.5).
The CO-MIB shall define the RFI notches using breakpoints in
xdsl2LConfProfPsdMaskDs (PSDMASKds) as specified in the relevant
Recommendations (e.g., ITU-T Recommendation G.992.5).
For ITU-T Recommendation G.993.2, this configuration parameter
defines the bands where the PSD shall be reduced as
specified in #7.2.1.2/G.993.2. Each band shall be represented
by a start and stop subcarrier indices with a subcarrier
spacing of 4.3125 kHz. Up to 16 bands may be specified.
This parameter defines the RFI bands for both the upstream
and downstream directions."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.10 (RFIBANDS)"
::= { xdsl2LineConfProfEntry 5 }
xdsl2LConfProfRaModeDs OBJECT-TYPE
SYNTAX Xdsl2RaMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mode of operation of a rate-adaptive xTU-C in the
transmit direction."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.1 (RA-MODEds)"
DEFVAL { manual }
::= { xdsl2LineConfProfEntry 6 }
xdsl2LConfProfRaModeUs OBJECT-TYPE
SYNTAX Xdsl2RaMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mode of operation of a rate-adaptive xTU-R in the
transmit direction."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.2 (RA-MODEus)"
DEFVAL { manual }
::= { xdsl2LineConfProfEntry 7 }
xdsl2LConfProfRaUsNrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Up-Shift Noise Margin value, to be used when
xdsl2LConfProfRaModeDs is set to 'dynamicRa'. If the downstream
noise margin is above this value, and stays above it,
for more than the time specified by the
xdsl2LConfProfRaUsTimeDs, the xTU-R shall attempt to increase
the downstream net data rate. The Downstream Up-Shift Noise
Margin ranges from 0 to 310 units of 0.1 dB (physical values
are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.3 (RA-USNRMds)"
DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 8 }
xdsl2LConfProfRaUsNrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Up-Shift Noise Margin value, to be used when
xdsl2LConfProfRaModeUs is set to 'dynamicRa'. If the upstream
noise margin is above this value, and stays above it,
for more than
the time specified by the xdsl2LConfProfRaUsTimeUs, the xTU-C
shall attempt to increase the upstream net data rate.
The Upstream Up-Shift Noise Margin ranges from 0 to 310 units of
0.1 dB (physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.4 (RA-USNRMus)"
DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 9 }
xdsl2LConfProfRaUsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Up-Shift Time Interval, to be used when
xdsl2LConfProfRaModeDs is set to 'dynamicRa'. The interval of
time that the downstream noise margin should stay above the
Downstream Up-Shift Noise Margin before the xTU-R shall attempt
to increase the downstream net data rate. The time interval
ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.5 (RA-UTIMEds)"
DEFVAL { 3600 }
::= { xdsl2LineConfProfEntry 10 }
xdsl2LConfProfRaUsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Up-Shift Time Interval, to be used when
xdsl2LConfProfRaModeUs is set to 'dynamicRa'. The interval of
time the upstream noise margin should stay above the Upstream
Up-Shift Noise Margin before the xTU-C shall attempt to increase
the upstream net data rate. The time interval ranges from 0 to
16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.6 (RA-UTIMEus)"
DEFVAL { 3600 }
::= { xdsl2LineConfProfEntry 11 }
xdsl2LConfProfRaDsNrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Down-Shift Noise Margin value, to be used
when xdsl2LConfProfRaModeDs is set to 'dynamicRa'. If the
downstream noise margin is below this value and stays
below that value, for more than the time specified by the
xdsl2LConfProfRaDsTimeDs, the xTU-R shall attempt to decrease
the downstream net data rate. The Downstream Down-Shift Noise
Margin ranges from 0 to 310 units of 0.1 dB (physical values
are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.7 (RA-DSNRMds)"
DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 12 }
xdsl2LConfProfRaDsNrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Downshift Noise Margin value, to be used when
xdsl2LConfProfRaModeUs is set to 'dynamicRa'. If the upstream
noise margin is below this value and stays below that value,
for more than the time specified by the xdsl2LConfProfRaDsTimeUs,
the xTU-C shall attempt to decrease the upstream net data rate.
The Upstream Down-Shift Noise Margin ranges from 0 to 310 units
of 0.1 dB (physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.8 (RA-DSNRMus)"
DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 13 }
xdsl2LConfProfRaDsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Downshift Time Interval, to be used when
xdsl2LConfProfRaModeDs is set to 'dynamicRa'. The interval of
time the downstream noise margin should stay below the Downstream
Down-Shift Noise Margin before the xTU-R shall attempt to
decrease the downstream net data rate. The time interval ranges
from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.9 (RA-DTIMEds)"
DEFVAL { 3600 }
::= { xdsl2LineConfProfEntry 14 }
xdsl2LConfProfRaDsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Down-Shift Time Interval, to be used when
xdsl2LConfProfRaModeUs is set to 'dynamicRa'. The interval of
time the upstream noise margin should stay below the Upstream
Down-Shift Noise Margin before the xTU-C shall attempt to
decrease the upstream net data rate. The time interval ranges
from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.10 (RA-DTIMEus)"
DEFVAL { 3600 }
::= { xdsl2LineConfProfEntry 15 }
xdsl2LConfProfTargetSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream bearer
channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB
(physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.1 (TARSNRMds)"
DEFVAL { 60 }
::= { xdsl2LineConfProfEntry 16 }
xdsl2LConfProfTargetSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the upstream bearer
channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB
(physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.2 (TARSNRMus)"
DEFVAL { 60 }
::= { xdsl2LineConfProfEntry 17 }
xdsl2LConfProfMaxSnrmDs OBJECT-TYPE
SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum Noise Margin the xTU-R receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-R
shall request that the xTU-C reduce the xTU-C transmit power to
get a noise margin below this limit (if this functionality is
supported). The maximum noise margin ranges from 0 to 310 units
of 0.1 dB (physical values are 0 to 31 dB). A value of
0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.3 (MAXSNRMds)"
DEFVAL { 310 }
::= { xdsl2LineConfProfEntry 18 }
xdsl2LConfProfMaxSnrmUs OBJECT-TYPE
SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum Noise Margin the xTU-C receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-C
shall request that the xTU-R reduce the xTU-R transmit power to
get a noise margin below this limit (if this functionality is
supported). The maximum noise margin ranges from 0 to 310 units
of 0.1 dB (physical values are 0 to 31 dB). A value of
0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.4 (MAXSNRMus)"
DEFVAL { 310 }
::= { xdsl2LineConfProfEntry 19 }
xdsl2LConfProfMinSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power.
If an increase to xTU-C transmit power is not possible, a loss-
of-margin (LOM) defect occurs, the xTU-R shall fail and attempt
to reinitialize and the NMS shall be notified. The minimum noise
margin ranges from 0 to 310 units of 0.1 dB (physical values are
0 to 31 dB). A value of 0 means that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.5 (MINSNRMds)"
DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 20 }
xdsl2LConfProfMinSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power.
If an increase of xTU-R transmit power is not possible, a loss-
of-margin (LOM) defect occurs, the xTU-C shall fail and attempt
to re-initialize and the NMS shall be notified. The minimum
noise margin ranges from 0 to 310 units of 0.1 dB (physical
values are 0 to 31 dB). A value of 0 means that there is no
minimum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.6 (MINSNRMus)"
DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 21 }
xdsl2LConfProfMsgMinUs OBJECT-TYPE
SYNTAX Unsigned32(4000..248000)
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Overhead Rate Upstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU in
upstream direction. Expressed in bits per second and ranges from
4000 to 248000 bits/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.1 (MSGMINus)"
DEFVAL { 4000 }
::= { xdsl2LineConfProfEntry 22 }
xdsl2LConfProfMsgMinDs OBJECT-TYPE
SYNTAX Unsigned32(4000..248000)
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Overhead Rate Downstream. Defines the minimum rate
of the message-based overhead that shall be maintained by the xTU
in the downstream direction. Expressed in bits per second and
ranges from 4000 to 248000 bits/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.2 (MSGMINds)"
DEFVAL { 4000 }
::= { xdsl2LineConfProfEntry 23 }
xdsl2LConfProfCeFlag OBJECT-TYPE
SYNTAX Xdsl2LineCeFlag
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter is a bit that enables the use of the optional
cyclic extension values."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.6.1 (CEFLAG)"
DEFVAL { { } }
::= { xdsl2LineConfProfEntry 24 }
xdsl2LConfProfSnrModeDs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter enables the transmitter-referred virtual
noise in the downstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.1 (SNRMODEds)"
DEFVAL { virtualNoiseDisabled }
::= { xdsl2LineConfProfEntry 25 }
xdsl2LConfProfSnrModeUs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter enables the transmitter-referred virtual
noise in the upstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.2 (SNRMODEus)"
DEFVAL { virtualNoiseDisabled }
::= { xdsl2LineConfProfEntry 26 }
xdsl2LConfProfTxRefVnDs OBJECT-TYPE
SYNTAX Xdsl2LineTxRefVnDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the downstream
transmitter-referred virtual noise.
The TXREFVNds shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, with a
subcarrier spacing of 4.3125 kHz, and a noise PSD level
(expressed in dBm/Hz) at that subcarrier. The set of breakpoints
can then be represented as:
[(t1,PSD1), (t2, PSD2), ... , (tN, PSDN)]."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.3 (TXREFVNds)"
::= { xdsl2LineConfProfEntry 27 }
xdsl2LConfProfTxRefVnUs OBJECT-TYPE
SYNTAX Xdsl2LineTxRefVnUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the upstream
transmitter-referred virtual noise.
The TXREFVNus shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, with a
subcarrier spacing of 4.3125 kHz, and a noise PSD level
(expressed in dBm/Hz) at that subcarrier. The set of breakpoints
can then be represented as:
[(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)]."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.4 (TXREFVNus)"
::= { xdsl2LineConfProfEntry 28 }
xdsl2LConfProfXtuTransSysEna OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"xTU Transmission System Enabling (XTSE). A list of the
different coding types enabled in this profile. It is coded in a
bitmap representation with 1 or more bits set. A bit set to
'1' means that the xTUs may apply the respective
coding for the DSL line. A bit set to '0' means that
the xTUs cannot apply the respective coding for the ADSL line.
All 'reserved' bits should be set to '0'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.1 (XTSE)"
::= { xdsl2LineConfProfEntry 29 }
xdsl2LConfProfPmMode OBJECT-TYPE
SYNTAX Xdsl2LinePmMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Power management state Enabling (PMMode). Defines the power
states the xTU-C or xTU-R may autonomously transition to on
this line.
This is a set of bits, where any bit with a '1' value
means that the xTU is allowed to transit into the respective
state and any bit with a '0' value means that the xTU
is not allowed to transit into the respective state."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.4 (PMMode)"
DEFVAL { { allowTransitionsToIdle, allowTransitionsToLowPower } }
::= { xdsl2LineConfProfEntry 30 }
xdsl2LConfProfL0Time OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state.
It ranges from 0 to 255 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.5 (L0-TIME)"
DEFVAL { 255 }
::= { xdsl2LineConfProfEntry 31 }
xdsl2LConfProfL2Time OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum time (in seconds) between an Entry into the
L2 state and the first Power Trim in the L2 state and between two
consecutive Power Trims in the L2 state.
It ranges from 0 to 255 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.6 (L2-TIME)"
DEFVAL { 255 }
::= { xdsl2LineConfProfEntry 32 }
xdsl2LConfProfL2Atpr OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state.
It ranges from 0 dB to 31 dB."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.7 (L2-ATPR)"
DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 33 }
xdsl2LConfProfL2Atprt OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The total maximum aggregate transmit power reduction (in dB)
that can be performed in an L2 state. This is the sum of all
reductions of L2 Requests (i.e., at transition of L0 to L2 state)
and Power Trims."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.9 (L2-ATPRT)"
DEFVAL { 31 }
::= { xdsl2LineConfProfEntry 34 }
xdsl2LConfProfProfiles OBJECT-TYPE
SYNTAX Xdsl2LineProfiles
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configuration parameter contains the G.993.2 profiles
to be allowed by the near-end xTU on this line.
It is coded in a bitmap representation (0 if not allowed, 1 if
allowed)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.11 (PROFILES)"
DEFVAL { { profile8a, profile8b, profile8c,
profile8d, profile12a, profile12b,
profile17a, profile30a } }
::= { xdsl2LineConfProfEntry 35 }
xdsl2LConfProfDpboEPsd OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the PSD mask that is
assumed to be permitted at the exchange. This parameter shall
use the same format as xdsl2LConfProfPsdMaskDs (PSDMASKds).
The maximum number of breakpoints for xdsl2LConfProfDpboEPsd
is 16."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOEPSD)"
::= { xdsl2LineConfProfEntry 36 }
xdsl2LConfProfDpboEsEL OBJECT-TYPE
SYNTAX Unsigned32 (0..511)
UNITS "0.5 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the assumed electrical
length of cables (E-side cables) connecting exchange-based DSL
services to a remote flexibility point (cabinet), that hosts the
xTU-C that is subject to spectrally shaped downstream power back-
off (DPBO) depending on this length. The electrical length is
defined as the loss (in dB) of an equivalent length of
hypothetical cable at a reference frequency defined by the
network operator or in spectrum management regulations.
This parameter shall be coded as an unsigned integer representing
an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as
511) in steps of 0.5 dB. All values in the range are valid. If
this parameter is set to '0', the DPBO shall be disabled."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESEL)"
DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 37 }
xdsl2LConfProfDpboEsCableModelA OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The E-side Cable Model parameter A (DPBOESCMA) of the cable
model (DPBOESCM) for cables connecting exchange-based DSL
services to a remote flexibility point (cabinet), that hosts the
xTU-C that is subject to spectrally shaped downstream power back-
off (DPBO) depending on this value.
The cable model is in terms of three scalars
xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
estimate the frequency dependent loss of E-side cables calculated
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter. Possible
values shall be coded as unsigned integers representing a scalar
value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
2^-8. All values in the range are valid. This parameter is used
only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMA)"
DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 38 }
xdsl2LConfProfDpboEsCableModelB OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The E-side Cable Model parameter B (DPBOESCMB) of the cable
model (DPBOESCM) for cables connecting exchange-based DSL
services to a remote flexibility point (cabinet), that hosts the
xTU-C that is subject to spectrally shaped downstream power back-
off (DPBO) depending on this value.
The cable model is in terms of three scalars
dsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
estimate the frequency dependent loss of E-side cables calculated
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter. Possible
values shall be coded as unsigned integers representing a scalar
value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
2^-8. All values in the range are valid. This parameter is used
only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMB)"
DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 39 }
xdsl2LConfProfDpboEsCableModelC OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The E-side Cable Model parameter C (DPBOESCMC) of the cable
model (DPBOESCM) for cables connecting exchange-based DSL
services to a remote flexibility point (cabinet), that hosts the
xTU-C that is subject to spectrally shaped downstream power back-
off (DPBO) depending on this value.
The cable model is in terms of three scalars
xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
estimate the frequency dependent loss of E-side cables calculated
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter. Possible
values shall be coded as unsigned integers representing a scalar
value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
2^-8. All values in the range are valid. This parameter is used
only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMC)"
DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 40 }
xdsl2LConfProfDpboMus OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.5 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the assumed Minimum
Usable receive PSD mask (in dBm/Hz) for exchange-based services,
used to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX)
defined below (to determine the DPBO). It shall be coded as an
unsigned integer representing a PSD mask level from 0 dBm/Hz
(coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5
dBm/Hz. All values in the range are valid.
NOTE - The PSD mask level is 3.5 dB above the signal PSD level.
This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOMUS)"
DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 41 }
xdsl2LConfProfDpboFMin OBJECT-TYPE
SYNTAX Unsigned32 (0..2048)
UNITS "4.3125 kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the minimum frequency
from which the DPBO shall be applied. It ranges from 0 kHz
(coded as 0) to 8832 kHz (coded as 2048) in steps of
4.3125 kHz. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMIN)"
DEFVAL { 32 }
::= { xdsl2LineConfProfEntry 42 }
xdsl2LConfProfDpboFMax OBJECT-TYPE
SYNTAX Unsigned32 (32..6956)
UNITS "4.3125 kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the maximum frequency
at which DPBO may be applied. It ranges from 138 kHz (coded as
32) to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.
This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMAX)"
DEFVAL { 512 }
::= { xdsl2LineConfProfEntry 43 }
xdsl2LConfProfUpboKL OBJECT-TYPE
SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the electrical length
expressed in dB at 1 MHz, kl0, configured by the CO-MIB.
The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in
steps of 0.1 dB. This parameter is relevant only if
xdsl2LConfProfUpboKLF is set to 'override(2)', which indicates
that this parameter's value will override the VTUs'
determination of the electrical length.
If xdsl2LConfProfUpboKLF is set either to auto(1) or
disableUpbo(3), then this parameter will be ignored."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOKL)"
DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 44 }
xdsl2LConfProfUpboKLF OBJECT-TYPE
SYNTAX Xdsl2UpboKLF
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the upstream power backoff force mode."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOKLF)
"
DEFVAL { disableUpbo }
::= { xdsl2LineConfProfEntry 45 }
xdsl2LConfProfUs0Mask OBJECT-TYPE
SYNTAX Xdsl2LineUs0Mask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configuration parameter contains the US0 PSD masks to be
allowed by the near-end xTU on the line. This parameter is only
defined for G.993.2 Annex A. It is represented as a bitmap (0
if not allowed and 1 if allowed)."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.18
(US0MASK)"
DEFVAL { {} }
::= { xdsl2LineConfProfEntry 46 }
xdsl2LConfProfForceInp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter, when set to 'true' indicates that the framer
settings of the bearer shall be selected such that the impulse
noise protection computed according to the formula specified in
the relevant Recommendation is greater than or equal to the
minimal impulse noise protection requirement.
This flag shall have the same value for all the bearers of one
line in the same direction."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.5 (FORCEINP)"
DEFVAL { false }
::= { xdsl2LineConfProfEntry 47 }
xdsl2LConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by
setting this object to 'destroy' or 'notInService'), it MUST be
first unreferenced from all templates.
A row in this table is said to be unreferenced when there is no
instance of xdsl2LConfTempLineProfile that refers to the row.
When a row is created in this table, the SNMP agent should also
create corresponding rows in the tables
xdsl2LineConfProfModeSpecTable and
xdsl2LineConfProfModeSpecBandUsTable.
When a row is deleted in this table, the SNMP agent should also
delete corresponding rows in the tables
xdsl2LineConfProfModeSpecTable and
xdsl2LineConfProfModeSpecBandUsTable."
::= { xdsl2LineConfProfEntry 48 }
------------------------------------------
-- xdsl2LineConfProfModeSpecTable --
------------------------------------------
xdsl2LineConfProfModeSpecTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineConfProfModeSpecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineConfProfModeSpecTable extends the DSL
line configuration profile by xDSL Mode-Specific parameters.
A row in this table that has an index of xdsl2LConfProfXdslMode
== defMode(1), is called a 'mandatory' row or 'default' row.
A row in this table that has an index such that
xdsl2LConfProfXdslMode is not equal to defMode(1), is called an
'optional' row or 'mode-specific' row.
When a row in the xdsl2LineConfProfTable table (the parent row)
is created, the SNMP agent will automatically create a
'mandatory' row in this table.
When the parent row is deleted, the SNMP agent will automatically
delete all associated rows in this table.
Any attempt to delete the 'mandatory' row using the
xdsl2LConfProfModeSpecRowStatus object will be rejected by the
SNMP agent.
The manager MAY create an 'optional' row in this table using the
xdsl2LConfProfModeSpecRowStatus object if the parent row
exists.
The manager MAY delete an 'optional' row in this table using the
xdsl2LConfProfModeSpecRowStatus object at any time.
If the actual transmission mode of a DSL line does not match one
of the 'optional' rows in this table, then the line will use the
PSD configuration from the 'mandatory' row.
Entries in this table MUST be maintained in a persistent
manner."
::= { xdsl2ProfileLine 3 }
xdsl2LineConfProfModeSpecEntry OBJECT-TYPE
SYNTAX Xdsl2LineConfProfModeSpecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineConfProfModeSpecTable extends the
DSL line configuration profile by DSL Mode-Specific
parameters."
INDEX { xdsl2LConfProfProfileName, xdsl2LConfProfXdslMode }
::= { xdsl2LineConfProfModeSpecTable 1 }
Xdsl2LineConfProfModeSpecEntry ::=
SEQUENCE {
xdsl2LConfProfXdslMode Xdsl2OperationModes,
xdsl2LConfProfMaxNomPsdDs Integer32,
xdsl2LConfProfMaxNomPsdUs Integer32,
xdsl2LConfProfMaxNomAtpDs Unsigned32,
xdsl2LConfProfMaxNomAtpUs Unsigned32,
xdsl2LConfProfMaxAggRxPwrUs Integer32,
xdsl2LConfProfPsdMaskDs Xdsl2PsdMaskDs,
xdsl2LConfProfPsdMaskUs Xdsl2PsdMaskUs,
xdsl2LConfProfPsdMaskSelectUs Xdsl2LinePsdMaskSelectUs,
xdsl2LConfProfClassMask Xdsl2LineClassMask,
xdsl2LConfProfLimitMask Xdsl2LineLimitMask,
xdsl2LConfProfUs0Disable Xdsl2LineUs0Disable,
xdsl2LConfProfModeSpecRowStatus RowStatus
}
xdsl2LConfProfXdslMode OBJECT-TYPE
SYNTAX Xdsl2OperationModes
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSL Mode is a way of categorizing the various xDSL
transmission modes into groups, each group (xDSL Mode) shares
the same PSD configuration.
There should be multiple entries in this table for a given line
profile in case multiple bits are set in
xdsl2LConfProfXtuTransSysEna for that profile."
REFERENCE "DSL Forum TR-129, paragraph #5.5"
::= { xdsl2LineConfProfModeSpecEntry 1 }
xdsl2LConfProfMaxNomPsdDs OBJECT-TYPE
SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum nominal transmit PSD in the downstream direction
during initialization and Showtime. It ranges from -600 to -300
units of 0.1 dBm/Hz (physical values are -60 to -30
dBm/Hz)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.1 (MAXNOMPSDds)"
DEFVAL { -300 }
::= { xdsl2LineConfProfModeSpecEntry 2 }
xdsl2LConfProfMaxNomPsdUs OBJECT-TYPE
SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz (physical values are -60 to -30
dBm/Hz)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.2 (MAXNOMPSDus)"
DEFVAL { -300 }
::= { xdsl2LineConfProfModeSpecEntry 3 }
xdsl2LConfProfMaxNomAtpDs OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum nominal aggregate to transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.3 (MAXNOMATPds)"
DEFVAL { 255 }
::= { xdsl2LineConfProfModeSpecEntry 4 }
xdsl2LConfProfMaxNomAtpUs OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.4 (MAXNOMATPus)"
DEFVAL { 255 }
::= { xdsl2LineConfProfModeSpecEntry 5 }
xdsl2LConfProfMaxAggRxPwrUs OBJECT-TYPE
SYNTAX Integer32(-255..255 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum upstream aggregate receive power over the
relevant set of subcarriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate
receive power value is honored. It ranges from -255 to 255
units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
A value of 0x7FFFFFFF (2147483647) means that there is no
limit."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.5 (MAXRXPWRus)"
DEFVAL { 255 }
::= { xdsl2LineConfProfModeSpecEntry 6 }
xdsl2LConfProfPsdMaskDs OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 32 pairs of values in the following
structure:
Octets 0-1 - Index of the first subcarrier used in the context of
a first breakpoint.
Octet 2 - The PSD reduction for the subcarrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a second breakpoint.
Octets 6-8 - Same, for a third breakpoint.
This architecture continues until octets 94-95, which are
associated with a 32nd breakpoint.
Each subcarrier index is an unsigned number in the range 0 and
NSCds-1. Each PSD reduction value is in the range 0 (0 dBm/Hz) to
255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz. Valid values are in
the range 0 to 190 (0 to -95 dBm/Hz).
When the number of breakpoints is less than 32, all remaining
octets are set to the value '0'. Note that the content of this
object should be correlated with the subcarrier mask and with
the RFI setup."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.9 (PSDMASKds)"
::= { xdsl2LineConfProfModeSpecEntry 7 }
xdsl2LConfProfPsdMaskUs OBJECT-TYPE
SYNTAX Xdsl2PsdMaskUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The upstream PSD mask applicable at the U-R2 reference
point.
This parameter is used only for G.992.5, and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 16 pairs of values in the following
structure:
Octets 0-1 - Index of the first subcarrier used in the context of
a first breakpoint.
Octet 2 - The PSD reduction for the subcarrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a second breakpoint.
Octets 6-8 - Same, for a third breakpoint.
This architecture continues until octets 9-47, which are
associated with a 16th breakpoint.
Each subcarrier index is an unsigned number in the range 0 and
NSCus-1. Each PSD reduction value is in the range 0 (0 dBm/Hz) to
255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz. Valid values are in
the range 0 to 190 (0 to -95 dBm/Hz).
When the number of breakpoints is less than 16, all remaining
octets are set to the value '0'. Note that the content of this
object should be correlated with the subcarrier mask and with
the RFI setup."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.12 (PSDMASKus)"
::= { xdsl2LineConfProfModeSpecEntry 8 }
xdsl2LConfProfPsdMaskSelectUs OBJECT-TYPE
SYNTAX Xdsl2LinePsdMaskSelectUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The selected upstream PSD mask. This parameter is used only
for Annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
xdsl2LConfProfXtuTransSysEna."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.11
(Upstream PSD mask selection)"
DEFVAL { adlu32Eu32 }
::= { xdsl2LineConfProfModeSpecEntry 9 }
xdsl2LConfProfClassMask OBJECT-TYPE
SYNTAX Xdsl2LineClassMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks (see
LIMITMASK) are grouped in PSD mask classes.
Each class is designed such that the PSD levels of each limit PSD
mask of a specific class are equal in their respective passband
above 552 kHz.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object. It selects a single PSD
mask class per Annex that is activated at the VTU-O."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.15
(CLASSMASK)"
DEFVAL { a998ORb997M1cORc998B }
::= { xdsl2LineConfProfModeSpecEntry 10 }
xdsl2LConfProfLimitMask OBJECT-TYPE
SYNTAX Xdsl2LineLimitMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter contains the G.993.2 limit
PSD masks of the selected PSD mask class, enabled by the near-end
xTU on this line for each class of profiles.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object.
Through this parameter, several limit PSD masks of the selected
PSD mask class (xdsl2LConfProfClassMask) may be enabled. The
enabling parameter is coded in a bitmap representation (0 if the
associated mask is not allowed, 1 if it is allowed)."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.16
(LIMITMASK)"
DEFVAL { {} }
::= { xdsl2LineConfProfModeSpecEntry 11 }
xdsl2LConfProfUs0Disable OBJECT-TYPE
SYNTAX Xdsl2LineUs0Disable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter indicates if the use of the US0 is
disabled for each limit PSD mask enabled in the
xdsl2LConfProfLimitMask parameter.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object.
For each limit PSD mask enabled in the xdsl2LConfProfLimitMask
parameter, a bit shall indicate if the US0 is disabled. The
disabling parameter is coded as a bitmap. The bit is set to '1'
if the US0 is disabled for the associated limit mask.
This parameter and the xdsl2LConfProfLimitMask parameter use the
same structure."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.17 (US0DISABLE)"
DEFVAL { {} }
::= { xdsl2LineConfProfModeSpecEntry 12 }
xdsl2LConfProfModeSpecRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
This row is activated by setting this object to 'active'.
A 'mandatory' row, as defined in the DESCRIPTION clause of
xdsl2LineConfProfModeSpecTable, cannot be deleted at all.
A 'mandatory' row can be taken out of service
(by setting this object to 'notInService') if the parent
row in the xdsl2LineConfProfTable table is not in
the 'active' state.
An 'optional' row (or 'mode-specific' row) can be deleted or
taken out of service (by setting this object to 'destroy' or
'notInService') at any time."
::= { xdsl2LineConfProfModeSpecEntry 13 }
----------------------------------------------
-- xdsl2LineConfProfModeSpecBandUsTable --
----------------------------------------------
xdsl2LineConfProfModeSpecBandUsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineConfProfModeSpecBandUsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineConfProfModeSpecBandUsTable extends
xdsl2LineConfProfModeSpecTable with upstream-band-specific
parameters for VDSL2, such as upstream power back-off
parameters xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB
(UPBOPSD-pb).
When a parent 'mandatory row' is created in
xdsl2LineConfProfModeSpecTable, the SNMP agent will automatically
create several 'mandatory' rows in this table -- one for each
upstream band:
Note: A mandatory row is one where xdsl2LConfProfXdslMode =
defMode(1). When the parent row is deleted, the SNMP agent will
automatically delete all associated rows in this table. Any
attempt to delete a 'mandatory' row using the
xdsl2LConfProfModeSpecBandUsRowStatus object will be rejected
by the SNMP agent. The manager MAY create a new 'optional'
row in this table using the xdsl2LConfProfModeSpecBandUsRowStatus
object if the associated parent row exists, and the
value of xdsl2LConfProfXdslMode is a G.993.2 value. The manager
MAY delete an 'optional' row in this table using the
xdsl2LConfProfModeSpecBandUsRowStatus object at any time.
With respect to the xdsl2LConfProfUpboPsdA and
xdsl2LConfProfUpboPsdB parameters, for a given upstream band,
if an optional row is missing from this table, then that
means upstream power back-off is disabled for that upstream
band.
Entries in this table MUST be maintained in a persistent
manner."
::= { xdsl2ProfileLine 4 }
xdsl2LineConfProfModeSpecBandUsEntry OBJECT-TYPE
SYNTAX Xdsl2LineConfProfModeSpecBandUsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineConfProfModeSpecBandUsTable extends
xdsl2LineConfProfModeSpecTable with upstream-band-specific
parameters for VDSL2, such as upstream power back-off parameters
xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB (UPBOPSD-
pb)."
INDEX { xdsl2LConfProfProfileName, xdsl2LConfProfXdslMode,
xdsl2LConfProfXdslBandUs}
::= { xdsl2LineConfProfModeSpecBandUsTable 1 }
Xdsl2LineConfProfModeSpecBandUsEntry ::=
SEQUENCE {
xdsl2LConfProfXdslBandUs Xdsl2BandUs,
xdsl2LConfProfUpboPsdA Integer32,
xdsl2LConfProfUpboPsdB Integer32,
xdsl2LConfProfModeSpecBandUsRowStatus RowStatus
}
xdsl2LConfProfXdslBandUs OBJECT-TYPE
SYNTAX Xdsl2BandUs
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each value identifies a specific band in the upstream
transmission direction (excluding the US0 band)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
::= { xdsl2LineConfProfModeSpecBandUsEntry 1 }
xdsl2LConfProfUpboPsdA OBJECT-TYPE
SYNTAX Integer32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the 'a' reference
parameter of the UPBO reference PSD used to compute the
upstream power back-off for the upstream band. A UPBO PSD
defined for each band shall consist of two parameters [a, b].
Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
(coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f'
expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
DEFVAL { 4000 }
::= { xdsl2LineConfProfModeSpecBandUsEntry 2 }
xdsl2LConfProfUpboPsdB OBJECT-TYPE
SYNTAX Integer32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the 'b' reference
parameter of the UPBO reference PSD used to compute the
upstream power back-off for the upstream band. A UPBO PSD
defined for each band shall consist of two parameters [a, b].
Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
(coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f'
expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
DEFVAL { 0 }
::= { xdsl2LineConfProfModeSpecBandUsEntry 3 }
xdsl2LConfProfModeSpecBandUsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
This row is activated by setting this object to 'active'.
A 'mandatory' row, as defined in the DESCRIPTION clause of
xdsl2LineConfProfModeSpecBandUsTable, cannot be deleted at all.
A 'mandatory' row can be taken out of service
(by setting this object to 'notInService') if the parent
row in the xdsl2LineConfProfModeSpecTable table is not in
the 'active' state.
An 'optional' row (or 'mode-specific' row) can be deleted or
taken out of service (by setting this object to 'destroy' or
'notInService') at any time."
::= { xdsl2LineConfProfModeSpecBandUsEntry 4 }
------------------------------------------------
-- xdsl2ChConfProfileTable --
------------------------------------------------
xdsl2ChConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ChConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ChConfProfileTable contains DSL channel
profile configuration.
Entries in this table MUST be maintained in a persistent
manner."
::= { xdsl2ProfileChannel 1 }
xdsl2ChConfProfileEntry OBJECT-TYPE
SYNTAX Xdsl2ChConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A default profile with an index of 'DEFVAL' will always
exist, and its parameters will be set to vendor-specific values,
unless otherwise specified in this document."
INDEX { xdsl2ChConfProfProfileName }
::= { xdsl2ChConfProfileTable 1 }
Xdsl2ChConfProfileEntry ::=
SEQUENCE {
xdsl2ChConfProfProfileName SnmpAdminString,
xdsl2ChConfProfMinDataRateDs Unsigned32,
xdsl2ChConfProfMinDataRateUs Unsigned32,
xdsl2ChConfProfMinResDataRateDs Unsigned32,
xdsl2ChConfProfMinResDataRateUs Unsigned32,
xdsl2ChConfProfMaxDataRateDs Unsigned32,
xdsl2ChConfProfMaxDataRateUs Unsigned32,
xdsl2ChConfProfMinDataRateLowPwrDs Unsigned32,
xdsl2ChConfProfMinDataRateLowPwrUs Unsigned32,
xdsl2ChConfProfMaxDelayDs Unsigned32,
xdsl2ChConfProfMaxDelayUs Unsigned32,
xdsl2ChConfProfMinProtectionDs Xdsl2SymbolProtection,
xdsl2ChConfProfMinProtectionUs Xdsl2SymbolProtection,
xdsl2ChConfProfMinProtection8Ds Xdsl2SymbolProtection8,
xdsl2ChConfProfMinProtection8Us Xdsl2SymbolProtection8,
xdsl2ChConfProfMaxBerDs Xdsl2MaxBer,
xdsl2ChConfProfMaxBerUs Xdsl2MaxBer,
xdsl2ChConfProfUsDataRateDs Unsigned32,
xdsl2ChConfProfDsDataRateDs Unsigned32,
xdsl2ChConfProfUsDataRateUs Unsigned32,
xdsl2ChConfProfDsDataRateUs Unsigned32,
xdsl2ChConfProfImaEnabled TruthValue,
xdsl2ChConfProfMaxDelayVar Unsigned32,
xdsl2ChConfProfInitPolicy Xdsl2ChInitPolicy,
xdsl2ChConfProfRowStatus RowStatus
}
xdsl2ChConfProfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { xdsl2ChConfProfileEntry 1 }
xdsl2ChConfProfMinDataRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.1
(Minimum data rate)"
::= { xdsl2ChConfProfileEntry 2 }
xdsl2ChConfProfMinDataRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate on Upstream direction. The minimum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.1
(Minimum data rate)"
::= { xdsl2ChConfProfileEntry 3 }
xdsl2ChConfProfMinResDataRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e.,
xdsl2LConfProfRaModeDs) is set to 'dynamicRa'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.2
(Minimum reserved data rate)"
::= { xdsl2ChConfProfileEntry 4 }
xdsl2ChConfProfMinResDataRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Reserved Data Rate on Upstream direction. The
minimum reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation Mode
in the direction of the bearer channel (i.e.,
xdsl2LConfProfRaModeUs) is set to 'dynamicRa'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.2
(Minimum reserved data rate)"
::= { xdsl2ChConfProfileEntry 5 }
xdsl2ChConfProfMaxDataRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.3
(Maximum data rate)"
::= { xdsl2ChConfProfileEntry 6 }
xdsl2ChConfProfMaxDataRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Data Rate on Upstream direction. The maximum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.3
(Maximum data rate)"
::= { xdsl2ChConfProfileEntry 7 }
xdsl2ChConfProfMinDataRateLowPwrDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter specifies the minimum net data rate for
the bearer channel as desired by the operator of the system
during the low power state (L1/L2). The power management low
power states L1 and L2 are defined in ITU-T Recommendations
G.992.2 and G.992.3, respectively.
The data rate is coded in steps of bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.5
(Minimum Data Rate in low power state)"
::= { xdsl2ChConfProfileEntry 8 }
xdsl2ChConfProfMinDataRateLowPwrUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter specifies the minimum net data rate for
the bearer channel as desired by the operator of the system
during the low power state (L1/L2). The power management low
power states L1 and L2 are defined in ITU-T Recommendations
G.992.2 and G.992.3, respectively.
The data rate is coded in steps of bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.5
(Minimum Data Rate in low power state)"
::= { xdsl2ChConfProfileEntry 9 }
xdsl2ChConfProfMaxDelayDs OBJECT-TYPE
SYNTAX Unsigned32(0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Interleave Delay on Downstream direction. The
maximum one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor) and D
(depth) values such that the actual one-way interleaving delay
(Xdsl2ChStatusActDelay) is as close as possible to, but less than
or equal to, xdsl2ChConfProfMaxDelayDs. The delay is coded in
ms, with the value 0 indicating no delay bound is being
imposed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2
(Maximum interleaving delay)"
::= { xdsl2ChConfProfileEntry 10 }
xdsl2ChConfProfMaxDelayUs OBJECT-TYPE
SYNTAX Unsigned32(0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on Upstream
direction. The xTUs shall choose the S (factor) and D (depth)
values such that the actual one-way interleaving delay
(Xdsl2ChStatusActDelay) is as close as possible to, but less than
or equal to, xdsl2ChConfProfMaxDelayUs. The delay is coded in
ms, with the value 0 indicating no delay bound is being
imposed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2
(Maximum interleaving delay)"
::= { xdsl2ChConfProfileEntry 11 }
xdsl2ChConfProfMinProtectionDs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter specifies the minimum impulse noise
protection for the bearer channel if it is transported over DMT
symbols with a subcarrier spacing of 4.3125 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier
spacing of 4.3125 kHz and can take the values 1/2 and any integer
from 0 to 16, inclusive. If the xTU does not support the
configured INPMIN value, it shall use the nearest supported
impulse noise protection greater than INPMIN."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3 (INPMINds)"
DEFVAL { noProtection }
::= { xdsl2ChConfProfileEntry 12 }
xdsl2ChConfProfMinProtectionUs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter specifies the minimum impulse noise
protection for the bearer channel if it is transported over DMT
symbols with a subcarrier spacing of 4.3125 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier
spacing of 4.3125 kHz and can take the values 1/2 and any integer
from 0 to 16, inclusive. If the xTU does not support the
configured INPMIN value, it shall use the nearest supported
impulse noise protection greater than INPMIN."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3 (INPMINus)"
DEFVAL { noProtection }
::= { xdsl2ChConfProfileEntry 13 }
xdsl2ChConfProfMinProtection8Ds OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection8
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter specifies the minimum impulse noise
protection for the bearer channel if it is transported over DMT
symbols with a subcarrier spacing of 8.625 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier
spacing of 8.625 kHz."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.4 (INPMIN8ds)"
DEFVAL { noProtection }
::= { xdsl2ChConfProfileEntry 14 }
xdsl2ChConfProfMinProtection8Us OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection8
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter specifies the minimum impulse noise
protection for the bearer channel if it is transported over DMT
symbols with a subcarrier spacing of 8.625 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier
spacing of 8.625 kHz."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.4 (INPMIN8us)"
DEFVAL { noProtection }
::= { xdsl2ChConfProfileEntry 15 }
xdsl2ChConfProfMaxBerDs OBJECT-TYPE
SYNTAX Xdsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Downstream direction. The
maximum bit error ratio for the bearer channel."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.6
(Maximum bit error ratio)"
DEFVAL { eminus5 }
::= { xdsl2ChConfProfileEntry 16 }
xdsl2ChConfProfMaxBerUs OBJECT-TYPE
SYNTAX Xdsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.6
(Maximum bit error ratio)"
DEFVAL { eminus5 }
::= { xdsl2ChConfProfileEntry 17 }
xdsl2ChConfProfUsDataRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data Rate Threshold Upshift for Downstream direction. An
'Up-Shift rate change' event is triggered when the
actual downstream data rate exceeds, by more than the threshold,
the data rate at the last entry into Showtime. The parameter is
coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.1
(Data rate threshold upshift)"
::= { xdsl2ChConfProfileEntry 18 }
xdsl2ChConfProfDsDataRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data Rate Threshold Downshift for Downstream direction. A
'Down-Shift rate change' event is triggered when the
actual downstream data rate is below the data rate at the last
entry into Showtime, by more than the threshold. The parameter
is coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.2
(Data rate threshold downshift)"
::= { xdsl2ChConfProfileEntry 19 }
xdsl2ChConfProfUsDataRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data Rate Threshold Upshift for Upstream direction. An
'Up-Shift rate change' event is triggered when the
actual upstream data rate exceeds, by more than the threshold,
the data rate at the last entry into Showtime. The parameter is
coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.1
(Data rate threshold upshift)"
::= { xdsl2ChConfProfileEntry 20 }
xdsl2ChConfProfDsDataRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data Rate Threshold Downshift for Upstream direction. A
'Down-Shift rate change' event is triggered when the
actual upstream data rate is below the data rate at the last
entry into Showtime, by more than the threshold. The parameter
is coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.2
(Data rate threshold downshift)"
::= { xdsl2ChConfProfileEntry 21 }
xdsl2ChConfProfImaEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IMA Mode Enable. The parameter enables the IMA operation
mode in the ATM Data Path. Relevant only if the channel is of
ATM Data Path. When in 'enable' state, the ATM Data
Path should comply with the requirements for IMA
transmission."
REFERENCE "ITU-T G.997.1, paragraph #7.3.4.1
(IMA operation mode enable parameter)"
DEFVAL { false }
::= { xdsl2ChConfProfileEntry 22 }
xdsl2ChConfProfMaxDelayVar OBJECT-TYPE
SYNTAX Unsigned32(1..255)
UNITS "0.1 milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum delay variation (DVMAX).
This optional VDSL2-specific parameter specifies the maximum
value for the delay variation allowed in an OLR procedure.
It is ranges from 1 to 254 units of 0.1 milliseconds (i.e., 0.1
to 25.4 milliseconds) with the special value 255, which indicates
that no delay variation bound is imposed."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.9
(DVMAX)"
DEFVAL { 255 }
::= { xdsl2ChConfProfileEntry 23 }
xdsl2ChConfProfInitPolicy OBJECT-TYPE
SYNTAX Xdsl2ChInitPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Channel Initialization Policy Selection (CIPOLICY).
This optional parameter indicates which policy shall be applied
to determine the transceiver configuration parameters at
initialization. Those policies are defined in the respective
Recommendations."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.10
(CIPOLICY)"
DEFVAL { policy0 }
::= { xdsl2ChConfProfileEntry 24 }
xdsl2ChConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by
setting this object to 'destroy' or 'notInService'), it MUST be
first unreferenced from all associated templates.
A row in xdsl2ChConfProfTable is said to be unreferenced when
there is no instance of xdsl2LConfTempChan1ConfProfile,
xdsl2LConfTempChan2ConfProfile, xdsl2LConfTempChan3ConfProfile,
or xdsl2LConfTempChan4ConfProfile that refers to
the row."
::= { xdsl2ChConfProfileEntry 25 }
------------------------------------------------
-- xdsl2LineAlarmConfTemplateTable --
------------------------------------------------
xdsl2LineAlarmConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineAlarmConfTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineAlarConfTemplateTable contains DSL
line alarm configuration templates.
Entries in this table MUST be maintained in a persistent
manner."
::= { xdsl2ProfileAlarmConf 1 }
xdsl2LineAlarmConfTemplateEntry OBJECT-TYPE
SYNTAX Xdsl2LineAlarmConfTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A default template with an index of 'DEFVAL' will always
exist, and its parameters will be set to vendor-specific values,
unless otherwise specified in this document."
INDEX { xdsl2LAlarmConfTempTemplateName }
::= { xdsl2LineAlarmConfTemplateTable 1 }
Xdsl2LineAlarmConfTemplateEntry ::=
SEQUENCE {
xdsl2LAlarmConfTempTemplateName SnmpAdminString,
xdsl2LAlarmConfTempLineProfile SnmpAdminString,
xdsl2LAlarmConfTempChan1ConfProfile SnmpAdminString,
xdsl2LAlarmConfTempChan2ConfProfile SnmpAdminString,
xdsl2LAlarmConfTempChan3ConfProfile SnmpAdminString,
xdsl2LAlarmConfTempChan4ConfProfile SnmpAdminString,
xdsl2LAlarmConfTempRowStatus RowStatus
}
xdsl2LAlarmConfTempTemplateName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { xdsl2LineAlarmConfTemplateEntry 1 }
xdsl2LAlarmConfTempLineProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the DSL Line
Thresholds Configuration Profile Table
(xdsl2LineAlarmConfProfileTable) that applies to this line."
REFERENCE "DSL Forum TR-129, paragraph #8.2"
DEFVAL { "DEFVAL" }
::= { xdsl2LineAlarmConfTemplateEntry 2 }
xdsl2LAlarmConfTempChan1ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the DSL
Channel Thresholds Configuration Profile Table
(xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
channel #1. The channel profile name specified here MUST match
the name of an existing row in the xdsl2ChAlarmConfProfileTable
table."
REFERENCE "DSL Forum TR-129, paragraph #8.4"
DEFVAL { "DEFVAL" }
::= { xdsl2LineAlarmConfTemplateEntry 3 }
xdsl2LAlarmConfTempChan2ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the DSL
Channel Thresholds Configuration Profile Table
(xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
channel #2. The channel profile name specified here MUST match
the name of an existing row in the xdsl2ChAlarmConfProfileTable
table. If the channel is unused, then the object is set to a
zero-length string."
REFERENCE "DSL Forum TR-129, paragraph #8.4"
DEFVAL { "" }
::= { xdsl2LineAlarmConfTemplateEntry 4 }
xdsl2LAlarmConfTempChan3ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the DSL
Channel Thresholds Configuration Profile Table
(xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
channel #3. The channel profile name specified here MUST match
the name of an existing row in the xdsl2ChAlarmConfProfileTable
table.
This object may be set to a non-zero-length string only if
xdsl2LAlarmConfTempChan2ConfProfile contains a non-zero-length
string."
REFERENCE "DSL Forum TR-129, paragraph #8.4"
DEFVAL { "" }
::= { xdsl2LineAlarmConfTemplateEntry 5 }
xdsl2LAlarmConfTempChan4ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the DSL
Channel Thresholds Configuration Profile Table
(xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
channel #4. The channel profile name specified here MUST match
the name of an existing row in the xdsl2ChAlarmConfProfileTable
table.
This object may be set to a non-zero-length string only if
xdsl2LAlarmConfTempChan3ConfProfile contains a non-zero-length
string."
REFERENCE "DSL Forum TR-129, paragraph #8.4"
DEFVAL { "" }
::= { xdsl2LineAlarmConfTemplateEntry 6 }
xdsl2LAlarmConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A template is activated by setting this object to 'active'.
Before a template can be deleted or taken out of service (by
setting this object to 'destroy' or 'notInService'), it MUST be
first unreferenced from all associated lines.
A row in this table is said to be unreferenced when there is no
instance of xdsl2LineAlarmConfTemplate that refers to the
row."
::= { xdsl2LineAlarmConfTemplateEntry 7 }
------------------------------------------------
-- xdsl2LineAlarmConfProfileTable --
------------------------------------------------
xdsl2LineAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineAlarmConfProfileTable contains DSL
line performance threshold values.
If a performance counter exceeds the threshold value specified
in this table, then the SNMP agent will issue a threshold trap.
Each performance counter has a unique trap type
(see NOTIFICATION-TYPE definitions below).
One trap will be sent per interval, per interface, per trap type.
A value of 0 will disable the trap.
Entries in this table MUST be maintained in a persistent
manner."
::= { xdsl2ProfileAlarmConf 2 }
xdsl2LineAlarmConfProfileEntry OBJECT-TYPE
SYNTAX Xdsl2LineAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A default profile with an index of 'DEFVAL' will always
exist, and its parameters will be set to vendor-specific values,
unless otherwise specified in this document."
INDEX { xdsl2LineAlarmConfProfileName }
::= { xdsl2LineAlarmConfProfileTable 1 }
Xdsl2LineAlarmConfProfileEntry ::=
SEQUENCE {
xdsl2LineAlarmConfProfileName SnmpAdminString,
xdsl2LineAlarmConfProfileXtucThresh15MinFecs
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXtucThresh15MinEs
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXtucThresh15MinSes
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXtucThresh15MinLoss
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXtucThresh15MinUas
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXturThresh15MinFecs
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXturThresh15MinEs
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXturThresh15MinSes
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXturThresh15MinLoss
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXturThresh15MinUas
HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileThresh15MinFailedFullInt Unsigned32,
xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt Unsigned32,
xdsl2LineAlarmConfProfileRowStatus RowStatus
}
xdsl2LineAlarmConfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { xdsl2LineAlarmConfProfileEntry 1 }
xdsl2LineAlarmConfProfileXtucThresh15MinFecs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MFecs counter, when
xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 2 }
xdsl2LineAlarmConfProfileXtucThresh15MinEs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MEs counter, when
xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 3 }
xdsl2LineAlarmConfProfileXtucThresh15MinSes OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MSes counter, when
xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 4 }
xdsl2LineAlarmConfProfileXtucThresh15MinLoss OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter, when
xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 5 }
xdsl2LineAlarmConfProfileXtucThresh15MinUas OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MUas counter, when
xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 6 }
xdsl2LineAlarmConfProfileXturThresh15MinFecs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MFecs counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 7 }
xdsl2LineAlarmConfProfileXturThresh15MinEs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MEs counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 8 }
xdsl2LineAlarmConfProfileXturThresh15MinSes OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MSes counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 9 }
xdsl2LineAlarmConfProfileXturThresh15MinLoss OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 10 }
xdsl2LineAlarmConfProfileXturThresh15MinUas OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MUas counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 11 }
xdsl2LineAlarmConfProfileThresh15MinFailedFullInt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLInitCurr15MfailedFullInits
counter.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 12 }
xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLInitCurr15MFailedShortInits
counter.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2LineAlarmConfProfileEntry 13 }
xdsl2LineAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by
setting this object to 'destroy' or 'notInService'), it MUST be
first unreferenced from all associated templates.
A row in this table is said to be unreferenced when there is no
instance of xdsl2LAlarmConfTempLineProfile that refers to the
row."
::= { xdsl2LineAlarmConfProfileEntry 14 }
------------------------------------------------
-- xdsl2ChAlarmConfProfileTable --
------------------------------------------------
xdsl2ChAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ChAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ChAlarmConfProfileTable contains DSL channel
performance threshold values.
If a performance counter exceeds the threshold value specified
in this table, then the SNMP agent will issue a threshold trap.
Each performance counter has a unique trap type
(see NOTIFICATION-TYPE definitions below).
One trap will be sent per interval per interface per trap type.
A value of 0 will disable the trap.
Entries in this table MUST be maintained in a persistent
manner."
::= { xdsl2ProfileAlarmConf 3 }
xdsl2ChAlarmConfProfileEntry OBJECT-TYPE
SYNTAX Xdsl2ChAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A default profile with an index of 'DEFVAL' will always
exist, and its parameters will be set to vendor-specific values,
unless otherwise specified in this document."
INDEX { xdsl2ChAlarmConfProfileName }
::= { xdsl2ChAlarmConfProfileTable 1 }
Xdsl2ChAlarmConfProfileEntry ::=
SEQUENCE {
xdsl2ChAlarmConfProfileName
SnmpAdminString,
xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations
Unsigned32,
xdsl2ChAlarmConfProfileXtucThresh15MinCorrected Unsigned32,
xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations
Unsigned32,
xdsl2ChAlarmConfProfileXturThresh15MinCorrected Unsigned32,
xdsl2ChAlarmConfProfileRowStatus RowStatus
}
xdsl2ChAlarmConfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { xdsl2ChAlarmConfProfileEntry 1 }
xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2ChAlarmConfProfileEntry 2 }
xdsl2ChAlarmConfProfileXtucThresh15MinCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2ChAlarmConfProfileEntry 3 }
xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2ChAlarmConfProfileEntry 4 }
xdsl2ChAlarmConfProfileXturThresh15MinCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.2.7.2"
DEFVAL { 0 }
::= { xdsl2ChAlarmConfProfileEntry 5 }
xdsl2ChAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by
setting this object to 'destroy' or 'notInService'), it MUST be
first unreferenced from all associated templates.
A row in xdsl2ChConfProfTable is said to be unreferenced when
there is no instance of xdsl2LAlarmConfTempChan1ConfProfile,
xdsl2LAlarmConfTempChan2ConfProfile,
xdsl2LAlarmConfTempChan3ConfProfile, or
xdsl2LAlarmConfTempChan4ConfProfile that refers to
the row."
::= { xdsl2ChAlarmConfProfileEntry 6 }
------------------------------------------------
-- PM line current counters --
------------------------------------------------
xdsl2PMLineCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMLineCurrTable contains current Performance
Monitoring results for DSL lines."
::= { xdsl2PMLine 1 }
xdsl2PMLineCurrEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of this
table is the termination unit."
INDEX { ifIndex, xdsl2PMLCurrUnit }
::= { xdsl2PMLineCurrTable 1 }
Xdsl2PMLineCurrEntry ::=
SEQUENCE {
xdsl2PMLCurrUnit Xdsl2Unit,
xdsl2PMLCurr15MValidIntervals Unsigned32,
xdsl2PMLCurr15MInvalidIntervals Unsigned32,
xdsl2PMLCurr15MTimeElapsed HCPerfTimeElapsed,
xdsl2PMLCurr15MFecs Counter32,
xdsl2PMLCurr15MEs Counter32,
xdsl2PMLCurr15MSes Counter32,
xdsl2PMLCurr15MLoss Counter32,
xdsl2PMLCurr15MUas Counter32,
xdsl2PMLCurr1DayValidIntervals Unsigned32,
xdsl2PMLCurr1DayInvalidIntervals Unsigned32,
xdsl2PMLCurr1DayTimeElapsed HCPerfTimeElapsed,
xdsl2PMLCurr1DayFecs Counter32,
xdsl2PMLCurr1DayEs Counter32,
xdsl2PMLCurr1DaySes Counter32,
xdsl2PMLCurr1DayLoss Counter32,
xdsl2PMLCurr1DayUas Counter32
}
xdsl2PMLCurrUnit OBJECT-TYPE
SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The termination unit."
::= { xdsl2PMLineCurrEntry 1 }
xdsl2PMLCurr15MValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15-minute PM intervals for which data
was collected. The value will typically be equal to the maximum
number of 15-minute intervals the implementation is planned to
store (i.e., beyond the scope of this MIB module) unless the
measurement was (re-)started recently, in which case the value
will be the number of complete 15-minute intervals for which
the agent has at least some data. In certain cases (e.g., in
the case where the agent is a proxy), it is possible that some
intervals are unavailable. In this case, this interval is the
maximum interval number for which data is available."
::= { xdsl2PMLineCurrEntry 2 }
xdsl2PMLCurr15MInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15-minute PM intervals for which no data is
available. The value will typically be zero except in cases
where the data for some intervals are not available (e.g.,
in proxy situations)."
::= { xdsl2PMLineCurrEntry 3 }
xdsl2PMLCurr15MTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in this interval."
::= { xdsl2PMLineCurrEntry 4 }
xdsl2PMLCurr15MFecs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was at
least one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
and paragraph #7.2.1.2.1 (FECS-LFE)"
::= { xdsl2PMLineCurrEntry 5 }
xdsl2PMLCurr15MEs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >=1 OR LPR >= 1.
xTU-R: FEBE >= 1 for one or more bearer channels OR
LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1.
This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
and paragraph #7.2.1.2.2 (ES-LFE)"
::= { xdsl2PMLineCurrEntry 6 }
xdsl2PMLCurr15MSes OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was:
xTU-C: (CRC-8 anomalies in one or more of the
received bearer channels) >= 18 OR LOS >= 1
OR SEF >= 1 OR LPR >= 1.
xTU-R: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1.
This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
and paragraph #7.2.1.2.3 (SES-LFE)"
::= { xdsl2PMLineCurrEntry 7 }
xdsl2PMLCurr15MLoss OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R)."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
and paragraph #7.2.1.2.4 (LOSS-LFE)"
::= { xdsl2PMLineCurrEntry 8 }
xdsl2PMLCurr15MUas OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in Unavailability State during this
interval. Unavailability begins at the onset of 10 contiguous
severely errored seconds, and ends at the onset of 10 contiguous
seconds with no severely errored seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
and paragraph #7.2.1.2.5 (UAS-LFE)"
::= { xdsl2PMLineCurrEntry 9 }
xdsl2PMLCurr1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24-hour PM intervals for which data was
collected. The value will typically be equal to the maximum
number of 24-hour intervals the implementation is planned to
store (i.e., beyond the scope of this MIB module) unless the
measurement was (re-)started recently, in which case the value
will be the number of complete 24-hour intervals for which
the agent has at least some data. In certain cases (e.g., in
the case where the agent is a proxy), it is possible that some
intervals are unavailable. In this case, this interval is the
maximum interval number for which data is available."
::= { xdsl2PMLineCurrEntry 10 }
xdsl2PMLCurr1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24-hour PM intervals for which no data is
available. The value will typically be zero except in cases
where the data for some intervals are not available (e.g.,
in proxy situations)."
::= { xdsl2PMLineCurrEntry 11 }
xdsl2PMLCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in this interval."
::= { xdsl2PMLineCurrEntry 12 }
xdsl2PMLCurr1DayFecs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was at
least one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
and paragraph #7.2.1.2.1 (FECS-LFE)"
::= { xdsl2PMLineCurrEntry 13 }
xdsl2PMLCurr1DayEs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1.
xTU-R: FEBE >= 1 for one or more bearer channels OR
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
and paragraph #7.2.1.2.2 (ES-LFE)"
::= { xdsl2PMLineCurrEntry 14 }
xdsl2PMLCurr1DaySes OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was:
xTU-C: (CRC-8 anomalies in one or more of the
received bearer channels) >= 18 OR LOS >= 1
OR SEF >= 1 OR LPR >= 1.
xTU-R: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1.
OR RDI >= 1 OR LPR-FE >= 1.
This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
and paragraph #7.2.1.2.3 (SES-LFE)"
::= { xdsl2PMLineCurrEntry 15 }
xdsl2PMLCurr1DayLoss OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R)."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
and paragraph #7.2.1.2.4 (LOSS-LFE)"
::= { xdsl2PMLineCurrEntry 16 }
xdsl2PMLCurr1DayUas OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in Unavailability State during this
interval.
Unavailability begins at the onset of 10 contiguous severely
errored seconds, and ends at the onset of 10 contiguous seconds
with no severely errored seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
and paragraph #7.2.1.2.5 (UAS-LFE)"
::= { xdsl2PMLineCurrEntry 17 }
------------------------------------------------
-- PM line init current counters --
------------------------------------------------
xdsl2PMLineInitCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineInitCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMLineInitCurrTable contains current
initialization counters for DSL lines."
::= { xdsl2PMLine 2 }
xdsl2PMLineInitCurrEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineInitCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table is an interface index where the
interface has an ifType of vdsl2(251)."
INDEX { ifIndex }
::= { xdsl2PMLineInitCurrTable 1 }
Xdsl2PMLineInitCurrEntry ::=
SEQUENCE {
xdsl2PMLInitCurr15MValidIntervals Unsigned32,
xdsl2PMLInitCurr15MInvalidIntervals Unsigned32,
xdsl2PMLInitCurr15MTimeElapsed Unsigned32,
xdsl2PMLInitCurr15MFullInits Unsigned32,
xdsl2PMLInitCurr15MFailedFullInits Unsigned32,
xdsl2PMLInitCurr15MShortInits Unsigned32,
xdsl2PMLInitCurr15MFailedShortInits Unsigned32,
xdsl2PMLInitCurr1DayValidIntervals Unsigned32,
xdsl2PMLInitCurr1DayInvalidIntervals Unsigned32,
xdsl2PMLInitCurr1DayTimeElapsed Unsigned32,
xdsl2PMLInitCurr1DayFullInits Unsigned32,
xdsl2PMLInitCurr1DayFailedFullInits Unsigned32,
xdsl2PMLInitCurr1DayShortInits Unsigned32,
xdsl2PMLInitCurr1DayFailedShortInits Unsigned32
}
xdsl2PMLInitCurr15MValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15-minute PM intervals for which data
was collected. The value will typically be equal to the maximum
number of 15-minute intervals the implementation is planned to
store (i.e., beyond the scope of this MIB module) unless the
measurement was (re-)started recently, in which case the value
will be the number of complete 15-minute intervals for which
the agent has at least some data. In certain cases (e.g., in
the case where the agent is a proxy), it is possible that some
intervals are unavailable. In this case, this interval is the
maximum interval number for which data is available."
::= { xdsl2PMLineInitCurrEntry 1 }
xdsl2PMLInitCurr15MInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15-minute PM intervals for which no data is
available. The value will typically be zero except in cases
where the data for some intervals are not available (e.g.,
in proxy situations)."
::= { xdsl2PMLineInitCurrEntry 2 }
xdsl2PMLInitCurr15MTimeElapsed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in this interval."
::= { xdsl2PMLineInitCurrEntry 3 }
xdsl2PMLInitCurr15MFullInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of full initializations attempted on the line
(successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.1"
::= { xdsl2PMLineInitCurrEntry 4 }
xdsl2PMLInitCurr15MFailedFullInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failed full initializations on the line during this
interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.2"
::= { xdsl2PMLineInitCurrEntry 5 }
xdsl2PMLInitCurr15MShortInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of short initializations attempted on the line
(successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.3"
::= { xdsl2PMLineInitCurrEntry 6 }
xdsl2PMLInitCurr15MFailedShortInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failed short initializations on the line during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.4"
::= { xdsl2PMLineInitCurrEntry 7 }
xdsl2PMLInitCurr1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24-hour PM intervals for which data was
collected. The value will typically be equal to the maximum
number of 24-hour intervals the implementation is planned to
store (i.e., beyond the scope of this MIB module) unless the
measurement was (re-)started recently, in which case the value
will be the number of complete 24-hour intervals for which
the agent has at least some data. In certain cases (e.g., in
the case where the agent is a proxy), it is possible that some
intervals are unavailable. In this case, this interval is the
maximum interval number for which data is available."
::= { xdsl2PMLineInitCurrEntry 8 }
xdsl2PMLInitCurr1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24-hour PM intervals for which no data is
available. The value will typically be zero except in cases
where the data for some intervals are not available (e.g.,
in proxy situations)."
::= { xdsl2PMLineInitCurrEntry 9 }
xdsl2PMLInitCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in this interval."
::= { xdsl2PMLineInitCurrEntry 10 }
xdsl2PMLInitCurr1DayFullInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of full initializations attempted on the line
(successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.1"
::= { xdsl2PMLineInitCurrEntry 11 }
xdsl2PMLInitCurr1DayFailedFullInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failed full initializations on the line during this
interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.2"
::= { xdsl2PMLineInitCurrEntry 12 }
xdsl2PMLInitCurr1DayShortInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of short initializations attempted on the line
(successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.3"
::= { xdsl2PMLineInitCurrEntry 13 }
xdsl2PMLInitCurr1DayFailedShortInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failed short initializations on the line during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.4"
::= { xdsl2PMLineInitCurrEntry 14 }
-------------------------------------------
-- PM line history 15 Minutes --
-------------------------------------------
xdsl2PMLineHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMLineHist15MinTable contains PM line history
for 15-minute intervals of DSL line."
::= { xdsl2PMLine 3 }
xdsl2PMLineHist15MinEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of this
table is the transmission unit. The third index is the interval
number."
INDEX { ifIndex,
xdsl2PMLHist15MUnit,
xdsl2PMLHist15MInterval }
::= { xdsl2PMLineHist15MinTable 1 }
Xdsl2PMLineHist15MinEntry ::=
SEQUENCE {
xdsl2PMLHist15MUnit Xdsl2Unit,
xdsl2PMLHist15MInterval Unsigned32,
xdsl2PMLHist15MMonitoredTime Unsigned32,
xdsl2PMLHist15MFecs Counter32,
xdsl2PMLHist15MEs Counter32,
xdsl2PMLHist15MSes Counter32,
xdsl2PMLHist15MLoss Counter32,
xdsl2PMLHist15MUas Counter32,
xdsl2PMLHist15MValidInterval TruthValue
}
xdsl2PMLHist15MUnit OBJECT-TYPE
SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The termination unit."
::= { xdsl2PMLineHist15MinEntry 1 }
xdsl2PMLHist15MInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval number."
::= { xdsl2PMLineHist15MinEntry 2 }
xdsl2PMLHist15MMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { xdsl2PMLineHist15MinEntry 3 }
xdsl2PMLHist15MFecs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was at
least one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
and paragraph #7.2.1.2.1 (FECS-LFE)"
::= { xdsl2PMLineHist15MinEntry 4 }
xdsl2PMLHist15MEs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1.
xTU-R: FEBE >= 1 for one or more bearer channels OR
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
and paragraph #7.2.1.2.2 (ES-LFE)"
::= { xdsl2PMLineHist15MinEntry 5 }
xdsl2PMLHist15MSes OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was:
xTU-C: (CRC-8 anomalies in one or more of the
received bearer channels) >= 18 OR LOS >= 1
OR SEF >= 1 OR LPR >= 1.
xTU-R: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1.
This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
and paragraph #7.2.1.2.3 (SES-LFE)"
::= { xdsl2PMLineHist15MinEntry 6 }
xdsl2PMLHist15MLoss OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R)."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
and paragraph #7.2.1.2.4 (LOSS-LFE)"
::= { xdsl2PMLineHist15MinEntry 7 }
xdsl2PMLHist15MUas OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in Unavailability State during this
interval.
Unavailability begins at the onset of 10 contiguous severely
errored seconds, and ends at the onset of 10 contiguous seconds
with no severely errored seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
and paragraph #7.2.1.2.5 (UAS-LFE)"
::= { xdsl2PMLineHist15MinEntry 8 }
xdsl2PMLHist15MValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { xdsl2PMLineHist15MinEntry 9 }
---------------------------------------
-- PM line history 1 Day --
---------------------------------------
xdsl2PMLineHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMLineHist1DayTable contains PM line history
for 24-hour intervals of DSL line."
::= { xdsl2PMLine 4 }
xdsl2PMLineHist1DayEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of this
table is the transmission unit.The third index is the interval
number."
INDEX { ifIndex,
xdsl2PMLHist1DUnit,
xdsl2PMLHist1DInterval }
::= { xdsl2PMLineHist1DayTable 1 }
Xdsl2PMLineHist1DayEntry ::=
SEQUENCE {
xdsl2PMLHist1DUnit Xdsl2Unit,
xdsl2PMLHist1DInterval Unsigned32,
xdsl2PMLHist1DMonitoredTime Unsigned32,
xdsl2PMLHist1DFecs Counter32,
xdsl2PMLHist1DEs Counter32,
xdsl2PMLHist1DSes Counter32,
xdsl2PMLHist1DLoss Counter32,
xdsl2PMLHist1DUas Counter32,
xdsl2PMLHist1DValidInterval TruthValue
}
xdsl2PMLHist1DUnit OBJECT-TYPE
SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The termination unit."
::= { xdsl2PMLineHist1DayEntry 1 }
xdsl2PMLHist1DInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval number."
::= { xdsl2PMLineHist1DayEntry 2 }
xdsl2PMLHist1DMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { xdsl2PMLineHist1DayEntry 3 }
xdsl2PMLHist1DFecs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was at
least one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
and paragraph #7.2.1.2.1 (FECS-LFE)"
::= { xdsl2PMLineHist1DayEntry 4 }
xdsl2PMLHist1DEs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1.
xTU-R: FEBE >= 1 for one or more bearer channels OR
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
and paragraph #7.2.1.2.2 (ES-LFE)"
::= { xdsl2PMLineHist1DayEntry 5 }
xdsl2PMLHist1DSes OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was:
xTU-C: (CRC-8 anomalies in one or more of the
received bearer channels) >= 18 OR LOS >= 1
OR SEF >= 1 OR LPR >= 1.
xTU-R: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1.
This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
and paragraph #7.2.1.2.3 (SES-LFE)"
::= { xdsl2PMLineHist1DayEntry 6 }
xdsl2PMLHist1DLoss OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R)."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
and paragraph #7.2.1.2.4 (LOSS-LFE)"
::= { xdsl2PMLineHist1DayEntry 7 }
xdsl2PMLHist1DUas OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in Unavailability State during this
interval.
Unavailability begins at the onset of 10 contiguous severely
errored seconds, and ends at the onset of 10 contiguous seconds
with no severely errored seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
and paragraph #7.2.1.2.5 (UAS-LFE)"
::= { xdsl2PMLineHist1DayEntry 8 }
xdsl2PMLHist1DValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { xdsl2PMLineHist1DayEntry 9 }
-------------------------------------------
-- PM line init history 15 Minutes --
-------------------------------------------
xdsl2PMLineInitHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineInitHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMLineInitHist15MinTable contains PM line
initialization history for 15-minute intervals of DSL
line."
::= { xdsl2PMLine 5 }
xdsl2PMLineInitHist15MinEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineInitHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index is the
interval number."
INDEX { ifIndex,
xdsl2PMLInitHist15MInterval }
::= { xdsl2PMLineInitHist15MinTable 1 }
Xdsl2PMLineInitHist15MinEntry ::=
SEQUENCE {
xdsl2PMLInitHist15MInterval Unsigned32,
xdsl2PMLInitHist15MMonitoredTime Unsigned32,
xdsl2PMLInitHist15MFullInits Unsigned32,
xdsl2PMLInitHist15MFailedFullInits Unsigned32,
xdsl2PMLInitHist15MShortInits Unsigned32,
xdsl2PMLInitHist15MFailedShortInits Unsigned32,
xdsl2PMLInitHist15MValidInterval TruthValue
}
xdsl2PMLInitHist15MInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval number."
::= { xdsl2PMLineInitHist15MinEntry 1 }
xdsl2PMLInitHist15MMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { xdsl2PMLineInitHist15MinEntry 2 }
xdsl2PMLInitHist15MFullInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of full initializations attempted on the line
(successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.1"
::= { xdsl2PMLineInitHist15MinEntry 3 }
xdsl2PMLInitHist15MFailedFullInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failed full initializations on the line during this
interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.2"
::= { xdsl2PMLineInitHist15MinEntry 4 }
xdsl2PMLInitHist15MShortInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of short initializations attempted on the line
(successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.3"
::= { xdsl2PMLineInitHist15MinEntry 5 }
xdsl2PMLInitHist15MFailedShortInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failed short initializations on the line during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.4"
::= { xdsl2PMLineInitHist15MinEntry 6 }
xdsl2PMLInitHist15MValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { xdsl2PMLineInitHist15MinEntry 7 }
-------------------------------------------
-- PM line init history 1 Day --
-------------------------------------------
xdsl2PMLineInitHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineInitHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMLineInitHist1DayTable contains PM line
initialization history for 24-hour intervals for DSL
lines."
::= { xdsl2PMLine 6 }
xdsl2PMLineInitHist1DayEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineInitHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index is the
interval number."
INDEX { ifIndex,
xdsl2PMLInitHist1DInterval }
::= { xdsl2PMLineInitHist1DayTable 1 }
Xdsl2PMLineInitHist1DayEntry ::=
SEQUENCE {
xdsl2PMLInitHist1DInterval Unsigned32,
xdsl2PMLInitHist1DMonitoredTime Unsigned32,
xdsl2PMLInitHist1DFullInits Unsigned32,
xdsl2PMLInitHist1DFailedFullInits Unsigned32,
xdsl2PMLInitHist1DShortInits Unsigned32,
xdsl2PMLInitHist1DFailedShortInits Unsigned32,
xdsl2PMLInitHist1DValidInterval TruthValue
}
xdsl2PMLInitHist1DInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval number."
::= { xdsl2PMLineInitHist1DayEntry 1 }
xdsl2PMLInitHist1DMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { xdsl2PMLineInitHist1DayEntry 2 }
xdsl2PMLInitHist1DFullInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of full initializations attempted on the line
(successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.1"
::= { xdsl2PMLineInitHist1DayEntry 3 }
xdsl2PMLInitHist1DFailedFullInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failed full initializations on the line during this
interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.2"
::= { xdsl2PMLineInitHist1DayEntry 4 }
xdsl2PMLInitHist1DShortInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of short initializations attempted on the line
(successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.3"
::= { xdsl2PMLineInitHist1DayEntry 5 }
xdsl2PMLInitHist1DFailedShortInits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failed short initializations on the line during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.3.4"
::= { xdsl2PMLineInitHist1DayEntry 6 }
xdsl2PMLInitHist1DValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { xdsl2PMLineInitHist1DayEntry 7 }
---------------------------------------------------
-- PM channel current counters --
---------------------------------------------------
xdsl2PMChCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMChCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMChCurrTable contains current Performance
Monitoring results for DSL channels."
::= { xdsl2PMChannel 1 }
xdsl2PMChCurrEntry OBJECT-TYPE
SYNTAX Xdsl2PMChCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of a DSL channel. A second index of
this table is the termination unit."
INDEX { ifIndex, xdsl2PMChCurrUnit }
::= { xdsl2PMChCurrTable 1 }
Xdsl2PMChCurrEntry ::=
SEQUENCE {
xdsl2PMChCurrUnit Xdsl2Unit,
xdsl2PMChCurr15MValidIntervals Unsigned32,
xdsl2PMChCurr15MInvalidIntervals Unsigned32,
xdsl2PMChCurr15MTimeElapsed HCPerfTimeElapsed,
xdsl2PMChCurr15MCodingViolations Unsigned32,
xdsl2PMChCurr15MCorrectedBlocks Unsigned32,
xdsl2PMChCurr1DayValidIntervals Unsigned32,
xdsl2PMChCurr1DayInvalidIntervals Unsigned32,
xdsl2PMChCurr1DayTimeElapsed HCPerfTimeElapsed,
xdsl2PMChCurr1DayCodingViolations Unsigned32,
xdsl2PMChCurr1DayCorrectedBlocks Unsigned32
}
xdsl2PMChCurrUnit OBJECT-TYPE
SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The termination unit."
::= { xdsl2PMChCurrEntry 1 }
xdsl2PMChCurr15MValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15-minute PM intervals for which data
was collected. The value will typically be equal to the maximum
number of 15-minute intervals the implementation is planned to
store (i.e., beyond the scope of this MIB module) unless the
measurement was (re-)started recently, in which case the value
will be the number of complete 15-minute intervals for which
the agent has at least some data. In certain cases (e.g., in
the case where the agent is a proxy), it is possible that some
intervals are unavailable. In this case, this interval is the
maximum interval number for which data is available."
::= { xdsl2PMChCurrEntry 2 }
xdsl2PMChCurr15MInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15-minute PM intervals for which no data is
available. The value will typically be zero except in cases
where the data for some intervals are not available (e.g.,
in proxy situations)."
::= { xdsl2PMChCurrEntry 3 }
xdsl2PMChCurr15MTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in this interval."
::= { xdsl2PMChCurrEntry 4 }
xdsl2PMChCurr15MCodingViolations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
channel during the interval. This parameter is inhibited during
UAS or SES. If the CRC is applied over multiple channels, then
each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
counters related to the individual channels."
REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
and paragraph #7.2.2.2.1 (CV-CFE)"
::= { xdsl2PMChCurrEntry 5 }
xdsl2PMChCurr15MCorrectedBlocks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of FEC (FFEC for xTU-R) anomalies (corrected code
words) occurring in the channel during the interval. This
parameter is inhibited during UAS or SES. If the FEC is applied
over multiple channels, then each related FEC (or FFEC) anomaly
SHOULD increment each of the counters related to the individual
channels."
REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
and paragraph #7.2.2.2.2 (FEC-CFE)"
::= { xdsl2PMChCurrEntry 6 }
xdsl2PMChCurr1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24-hour PM intervals for which data was
collected. The value will typically be equal to the maximum
number of 24-hour intervals the implementation is planned to
store (i.e., beyond the scope of this MIB module) unless the
measurement was (re-)started recently, in which case the value
will be the number of complete 24-hour intervals for which
the agent has at least some data. In certain cases (e.g., in
the case where the agent is a proxy), it is possible that some
intervals are unavailable. In this case, this interval is the
maximum interval number for which data is available."
::= { xdsl2PMChCurrEntry 7 }
xdsl2PMChCurr1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24-hour PM intervals for which no data is
available. The value will typically be zero except in cases
where the data for some intervals are not available (e.g.,
in proxy situations)."
::= { xdsl2PMChCurrEntry 8 }
xdsl2PMChCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in this interval."
::= { xdsl2PMChCurrEntry 9 }
xdsl2PMChCurr1DayCodingViolations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
channel during the interval. This parameter is inhibited during
UAS or SES. If the CRC is applied over multiple channels, then
each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
counters related to the individual channels."
REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
and paragraph #7.2.2.2.1 (CV-CFE)"
::= { xdsl2PMChCurrEntry 10 }
xdsl2PMChCurr1DayCorrectedBlocks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of FEC (FFEC for xTU-R) anomalies (corrected code
words) occurring in the channel during the interval. This
parameter is inhibited during UAS or SES. If the FEC is applied
over multiple channels, then each related FEC (or FFEC) anomaly
SHOULD increment each of the counters related to the individual
channels."
REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
and paragraph #7.2.2.2.2 (FEC-CFE)"
::= { xdsl2PMChCurrEntry 11 }
-------------------------------------------
-- PM channel history 15 Minutes --
-------------------------------------------
xdsl2PMChHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMChHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMChHist15MinTable contains Performance
Monitoring (PM) history for 15-minute intervals for DSL channels
PM."
::= { xdsl2PMChannel 2 }
xdsl2PMChHist15MinEntry OBJECT-TYPE
SYNTAX Xdsl2PMChHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of a DSL channel. A second index of
this table is the transmission unit. The third index is the
interval number."
INDEX { ifIndex,
xdsl2PMChHist15MUnit,
xdsl2PMChHist15MInterval }
::= { xdsl2PMChHist15MinTable 1 }
Xdsl2PMChHist15MinEntry ::=
SEQUENCE {
xdsl2PMChHist15MUnit Xdsl2Unit,
xdsl2PMChHist15MInterval Unsigned32,
xdsl2PMChHist15MMonitoredTime Unsigned32,
xdsl2PMChHist15MCodingViolations Unsigned32,
xdsl2PMChHist15MCorrectedBlocks Unsigned32,
xdsl2PMChHist15MValidInterval TruthValue
}
xdsl2PMChHist15MUnit OBJECT-TYPE
SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The termination unit."
::= { xdsl2PMChHist15MinEntry 1 }
xdsl2PMChHist15MInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval number."
::= { xdsl2PMChHist15MinEntry 2 }
xdsl2PMChHist15MMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { xdsl2PMChHist15MinEntry 3 }
xdsl2PMChHist15MCodingViolations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
channel during the interval. This parameter is inhibited during
UAS or SES. If the CRC is applied over multiple channels, then
each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
counters related to the individual channels."
REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
and paragraph #7.2.2.2.1 (CV-CFE)"
::= { xdsl2PMChHist15MinEntry 4 }
xdsl2PMChHist15MCorrectedBlocks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of FEC (FFEC for xTU-R) anomalies (corrected code
words) occurring in the channel during the interval. This
parameter is inhibited during UAS or SES. If the FEC is applied
over multiple channels, then each related FEC (or FFEC) anomaly
SHOULD increment each of the counters related to the individual
channels."
REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
and paragraph #7.2.2.2.2 (FEC-CFE)"
::= { xdsl2PMChHist15MinEntry 5 }
xdsl2PMChHist15MValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { xdsl2PMChHist15MinEntry 6 }
------------------------------------------
-- PM channel history 1 Day --
------------------------------------------
xdsl2PMChHist1DTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMChHist1DEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMChHist1DTable contains Performance
Monitoring (PM) history for 1-day intervals for DSL channels
PM."
::= { xdsl2PMChannel 3 }
xdsl2PMChHist1DEntry OBJECT-TYPE
SYNTAX Xdsl2PMChHist1DEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One index of this table is an interface index where the
interface has an ifType of a DSL channel. A second index of
this table is the transmission unit. The third index is the
interval number."
INDEX { ifIndex,
xdsl2PMChHist1DUnit,
xdsl2PMChHist1DInterval }
::= { xdsl2PMChHist1DTable 1 }
Xdsl2PMChHist1DEntry ::=
SEQUENCE {
xdsl2PMChHist1DUnit Xdsl2Unit,
xdsl2PMChHist1DInterval Unsigned32,
xdsl2PMChHist1DMonitoredTime Unsigned32,
xdsl2PMChHist1DCodingViolations Unsigned32,
xdsl2PMChHist1DCorrectedBlocks Unsigned32,
xdsl2PMChHist1DValidInterval TruthValue
}
xdsl2PMChHist1DUnit OBJECT-TYPE
SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The termination unit."
::= { xdsl2PMChHist1DEntry 1 }
xdsl2PMChHist1DInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval number."
::= { xdsl2PMChHist1DEntry 2 }
xdsl2PMChHist1DMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { xdsl2PMChHist1DEntry 3 }
xdsl2PMChHist1DCodingViolations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
channel during the interval. This parameter is inhibited during
UAS or SES. If the CRC is applied over multiple channels, then
each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
counters related to the individual channels."
REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
and paragraph #7.2.2.2.1 (CV-CFE)"
::= { xdsl2PMChHist1DEntry 4 }
xdsl2PMChHist1DCorrectedBlocks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of FEC (FFEC for xTU-R) anomalies (corrected code
words) occurring in the channel during the interval. This
parameter is inhibited during UAS or SES. If the FEC is applied
over multiple channels, then each related FEC (or FFEC) anomaly
SHOULD increment each of the counters related to the individual
channels."
REFERENCE "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
and paragraph #7.2.2.2.2 (FEC-CFE)"
::= { xdsl2PMChHist1DEntry 5 }
xdsl2PMChHist1DValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { xdsl2PMChHist1DEntry 6 }
-------------------------------------------
-- Notifications Group --
-------------------------------------------
xdsl2LinePerfFECSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MFecs,
xdsl2LineAlarmConfProfileXtucThresh15MinFecs
}
STATUS current
DESCRIPTION
"This notification indicates that the FEC seconds threshold
has been reached/exceeded for the referred xTU-C."
::= { xdsl2Notifications 1 }
xdsl2LinePerfFECSThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MFecs,
xdsl2LineAlarmConfProfileXturThresh15MinFecs
}
STATUS current
DESCRIPTION
"This notification indicates that the FEC seconds threshold
has been reached/exceeded for the referred xTU-R."
::= { xdsl2Notifications 2 }
xdsl2LinePerfESThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MEs,
xdsl2LineAlarmConfProfileXtucThresh15MinEs
}
STATUS current
DESCRIPTION
"This notification indicates that the errored seconds
threshold has been reached/exceeded for the referred xTU-C."
::= { xdsl2Notifications 3 }
xdsl2LinePerfESThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MEs,
xdsl2LineAlarmConfProfileXturThresh15MinEs
}
STATUS current
DESCRIPTION
"This notification indicates that the errored seconds
threshold has been reached/exceeded for the referred xTU-R."
::= { xdsl2Notifications 4 }
xdsl2LinePerfSESThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MSes,
xdsl2LineAlarmConfProfileXtucThresh15MinSes
}
STATUS current
DESCRIPTION
"This notification indicates that the severely errored seconds
threshold has been reached/exceeded for the referred xTU-C."
::= { xdsl2Notifications 5 }
xdsl2LinePerfSESThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MSes,
xdsl2LineAlarmConfProfileXturThresh15MinSes
}
STATUS current
DESCRIPTION
"This notification indicates that the severely errored seconds
threshold has been reached/exceeded for the referred xTU-R."
::= { xdsl2Notifications 6 }
xdsl2LinePerfLOSSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MLoss,
xdsl2LineAlarmConfProfileXtucThresh15MinLoss
}
STATUS current
DESCRIPTION
"This notification indicates that the LOS seconds
threshold has been reached/exceeded for the referred xTU-C."
::= { xdsl2Notifications 7 }
xdsl2LinePerfLOSSThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MLoss,
xdsl2LineAlarmConfProfileXturThresh15MinLoss
}
STATUS current
DESCRIPTION
"This notification indicates that the LOS seconds
threshold has been reached/exceeded for the referred xTU-R."
::= { xdsl2Notifications 8 }
xdsl2LinePerfUASThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MUas,
xdsl2LineAlarmConfProfileXtucThresh15MinUas
}
STATUS current
DESCRIPTION
"This notification indicates that the unavailable seconds
threshold has been reached/exceeded for the referred xTU-C."
::= { xdsl2Notifications 9 }
xdsl2LinePerfUASThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MUas,
xdsl2LineAlarmConfProfileXturThresh15MinUas
}
STATUS current
DESCRIPTION
"This notification indicates that the unavailable seconds
threshold has been reached/exceeded for the referred xTU-R."
::= { xdsl2Notifications 10 }
xdsl2LinePerfCodingViolationsThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMChCurr15MCodingViolations,
xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations
}
STATUS current
DESCRIPTION
"This notification indicates that the coding violations
threshold has been reached/exceeded for the referred xTU-C."
::= { xdsl2Notifications 11 }
xdsl2LinePerfCodingViolationsThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMChCurr15MCodingViolations,
xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations
}
STATUS current
DESCRIPTION
"This notification indicates that the coding violations
threshold has been reached/exceeded for the referred xTU-R."
::= { xdsl2Notifications 12 }
xdsl2LinePerfCorrectedThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMChCurr15MCorrectedBlocks,
xdsl2ChAlarmConfProfileXtucThresh15MinCorrected
}
STATUS current
DESCRIPTION
"This notification indicates that the corrected blocks
(FEC events) threshold has been reached/exceeded for the
referred xTU-C."
::= { xdsl2Notifications 13 }
xdsl2LinePerfCorrectedThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMChCurr15MCorrectedBlocks,
xdsl2ChAlarmConfProfileXturThresh15MinCorrected
}
STATUS current
DESCRIPTION
"This notification indicates that the corrected blocks
(FEC events) threshold has been reached/exceeded for the
referred xTU-R."
::= { xdsl2Notifications 14 }
xdsl2LinePerfFailedFullInitThresh NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLInitCurr15MFailedFullInits,
xdsl2LineAlarmConfProfileThresh15MinFailedFullInt
}
STATUS current
DESCRIPTION
"This notification indicates that the failed full
initializations threshold has been reached/exceeded for the
referred ADSL/ADSL2 or ADSL2 line."
::= { xdsl2Notifications 15 }
xdsl2LinePerfFailedShortInitThresh NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLInitCurr15MFailedShortInits,
xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt
}
STATUS current
DESCRIPTION
"This notification indicates that the failed short
initializations threshold has been reached/exceeded for the
referred VDSL2/ADSL/ADSL2 or ADSL2+ line."
::= { xdsl2Notifications 16 }
xdsl2LineStatusChangeXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2LineStatusXtuc
}
STATUS current
DESCRIPTION
"This notification indicates that a status change is
detected for the referred xTU-C."
::= { xdsl2Notifications 17 }
xdsl2LineStatusChangeXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2LineStatusXtur
}
STATUS current
DESCRIPTION
"This notification indicates that a status change is
detected for the referred xTU-R."
::= { xdsl2Notifications 18 }
-- conformance information
xdsl2Groups OBJECT IDENTIFIER ::= { xdsl2Conformance 1 }
xdsl2Compliances OBJECT IDENTIFIER ::= { xdsl2Conformance 2 }
xdsl2LineMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which
manage VDSL2/ADSL/ADSL2 and ADSL2+ interfaces."
MODULE -- this module
MANDATORY-GROUPS
{
xdsl2LineGroup,
xdsl2ChannelStatusGroup,
xdsl2SCStatusGroup,
xdsl2LineInventoryGroup,
xdsl2LineConfTemplateGroup,
xdsl2LineConfProfGroup,
xdsl2LineConfProfModeSpecGroup,
xdsl2LineConfProfModeSpecBandUsGroup,
xdsl2ChConfProfileGroup,
xdsl2LineAlarmConfTemplateGroup,
xdsl2PMLineCurrGroup,
xdsl2PMLineInitCurrGroup,
xdsl2PMLineHist15MinGroup,
xdsl2PMLineHist1DayGroup,
xdsl2PMLineInitHist15MinGroup,
xdsl2PMLineInitHist1DayGroup,
xdsl2PMChCurrGroup,
xdsl2PMChHist15MinGroup,
xdsl2PMChHist1DGroup
}
GROUP xdsl2LineFallbackGroup
DESCRIPTION
"The group of configuration, status, and commands
objects on the line level that are associated with the fallback
feature."
GROUP xdsl2LineBpscGroup
DESCRIPTION
"The group of configuration, status, and commands objects
on the line level that are associated with requesting a bits
per subcarrier measurement."
GROUP xdsl2LineSegmentGroup
DESCRIPTION
"The group of status and commands objects on the line
level that are used to hold the results of the
bits-per-subcarrier measurement."
GROUP xdsl2ChannelStatusAtmGroup
DESCRIPTION
"The group of status objects required when the data path
is ATM."
GROUP xdsl2ChannelStatusPtmGroup
DESCRIPTION
"The group of status objects required when the data path
is PTM."
GROUP xdsl2LineConfProfRaGroup
DESCRIPTION
"The group of objects required for controlling the
rate-adaptive behavior of the line."
GROUP xdsl2LineConfProfMsgMinGroup
DESCRIPTION
"The group of objects required for controlling the rate
reserved for Overhead traffic."
GROUP xdsl2LineAlarmConfProfileGroup
DESCRIPTION
"The group of objects that define the alarm thresholds
on line-level PM counters."
GROUP xdsl2ChAlarmConfProfileGroup
DESCRIPTION
"The group of objects that define the alarm thresholds
on channel-level PM counters."
GROUP xdsl2ChConfProfileAtmGroup
DESCRIPTION
"The group of configuration objects required when the data
path is ATM."
GROUP xdsl2ChConfProfileMinResGroup
DESCRIPTION
"The group of configuration objects required for the
reserved data rate."
GROUP xdsl2ChConfProfileOptAttrGroup
DESCRIPTION
"The group of various optional channel configuration
objects."
GROUP xdsl2PMLineInitCurrShortGroup
DESCRIPTION
"The group of PM counters for the current intervals short
initializations."
GROUP xdsl2PMLineInitHist15MinShortGroup
DESCRIPTION
"The group of PM counters for the previous 15-minute
intervals short initializations."
GROUP xdsl2PMLineInitHist1DayShortGroup
DESCRIPTION
"The group of PM counters for the previous 24-hour
intervals short initializations."
GROUP xdsl2ScalarSCGroup
DESCRIPTION
"The group of objects that report the available memory
resources for the DELT processes."
GROUP xdsl2ThreshNotificationGroup
DESCRIPTION
"The group of thresholds crossing notifications."
GROUP xdsl2StatusChangeNotificationGroup
DESCRIPTION
"The group of status change notifications."
::= { xdsl2Compliances 1 }
-- units of conformance
xdsl2LineGroup OBJECT-GROUP
OBJECTS
{
xdsl2LineConfTemplate,
xdsl2LineAlarmConfTemplate,
xdsl2LineCmndConfPmsf,
xdsl2LineCmndConfLdsf,
xdsl2LineCmndConfLdsfFailReason,
xdsl2LineCmndAutomodeColdStart,
xdsl2LineCmndConfReset,
xdsl2LineStatusXtuTransSys,
xdsl2LineStatusPwrMngState,
xdsl2LineStatusInitResult,
xdsl2LineStatusLastStateDs,
xdsl2LineStatusLastStateUs,
xdsl2LineStatusXtur,
xdsl2LineStatusXtuc,
xdsl2LineStatusAttainableRateDs,
xdsl2LineStatusAttainableRateUs,
xdsl2LineStatusActPsdDs,
xdsl2LineStatusActPsdUs,
xdsl2LineStatusActAtpDs,
xdsl2LineStatusActAtpUs,
xdsl2LineStatusActProfile,
xdsl2LineStatusActLimitMask,
xdsl2LineStatusActUs0Mask,
xdsl2LineStatusActSnrModeDs,
xdsl2LineStatusActSnrModeUs,
xdsl2LineStatusElectricalLength,
xdsl2LineStatusTssiDs,
xdsl2LineStatusTssiUs,
xdsl2LineStatusMrefPsdDs,
xdsl2LineStatusMrefPsdUs,
xdsl2LineStatusTrellisDs,
xdsl2LineStatusTrellisUs,
xdsl2LineStatusActualCe,
xdsl2LineBandStatusLnAtten,
xdsl2LineBandStatusSigAtten,
xdsl2LineBandStatusSnrMargin
}
STATUS current
DESCRIPTION
"The group of configuration, status, and commands objects
on the line level."
::= { xdsl2Groups 1 }
xdsl2LineFallbackGroup OBJECT-GROUP
OBJECTS
{
xdsl2LineConfFallbackTemplate,
xdsl2LineStatusActTemplate
}
STATUS current
DESCRIPTION
"The group of configuration, status, and commands
objects on the line level that are associated with the
fallback feature."
::= { xdsl2Groups 2 }
xdsl2LineBpscGroup OBJECT-GROUP
OBJECTS
{
xdsl2LineCmndConfBpsc,
xdsl2LineCmndConfBpscFailReason,
xdsl2LineCmndConfBpscRequests
}
STATUS current
DESCRIPTION
"The group of configuration, status, and commands
objects on the line level that are associated with requesting
a bits-per-subcarrier measurement."
::= { xdsl2Groups 3 }
xdsl2LineSegmentGroup OBJECT-GROUP
OBJECTS
{
xdsl2LineSegmentBitsAlloc,
xdsl2LineSegmentRowStatus
}
STATUS current
DESCRIPTION
"The group of status and commands objects on the line
level that are used to hold the results of the
bits-per-subcarrier measurement."
::= { xdsl2Groups 4 }
xdsl2ChannelStatusGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChStatusActDataRate,
xdsl2ChStatusPrevDataRate,
xdsl2ChStatusActDelay,
xdsl2ChStatusActInp,
xdsl2ChStatusInpReport,
xdsl2ChStatusNFec,
xdsl2ChStatusRFec,
xdsl2ChStatusLSymb,
xdsl2ChStatusIntlvDepth,
xdsl2ChStatusIntlvBlock,
xdsl2ChStatusLPath
}
STATUS current
DESCRIPTION
"The group of status objects on the channel level."
::= { xdsl2Groups 5 }
xdsl2ChannelStatusAtmGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChStatusAtmStatus
}
STATUS current
DESCRIPTION
"The group of status objects on the data path level
when it is ATM."
::= { xdsl2Groups 6 }
xdsl2ChannelStatusPtmGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChStatusPtmStatus
}
STATUS current
DESCRIPTION
"The group of status objects on the data path level
when it is PTM."
::= { xdsl2Groups 7 }
xdsl2SCStatusGroup OBJECT-GROUP
OBJECTS
{
xdsl2SCStatusLinScale,
xdsl2SCStatusLinScGroupSize,
xdsl2SCStatusLogMt,
xdsl2SCStatusLogScGroupSize,
xdsl2SCStatusQlnMt,
xdsl2SCStatusQlnScGroupSize,
xdsl2SCStatusSnrMtime,
xdsl2SCStatusSnrScGroupSize,
xdsl2SCStatusBandLnAtten,
xdsl2SCStatusBandSigAtten,
xdsl2SCStatusAttainableRate,
xdsl2SCStatusRowStatus,
xdsl2SCStatusSegmentLinReal,
xdsl2SCStatusSegmentLinImg,
xdsl2SCStatusSegmentLog,
xdsl2SCStatusSegmentQln,
xdsl2SCStatusSegmentSnr,
xdsl2SCStatusSegmentBitsAlloc,
xdsl2SCStatusSegmentGainAlloc
}
STATUS current
DESCRIPTION
"The group of status objects on the subcarrier level.
They are updated as a result of a DELT process."
::= { xdsl2Groups 8 }
xdsl2LineInventoryGroup OBJECT-GROUP
OBJECTS
{
xdsl2LInvG994VendorId,
xdsl2LInvSystemVendorId,
xdsl2LInvVersionNumber,
xdsl2LInvSerialNumber,
xdsl2LInvSelfTestResult,
xdsl2LInvTransmissionCapabilities
}
STATUS current
DESCRIPTION
"The group of inventory objects per xTU."
::= { xdsl2Groups 9 }
xdsl2LineConfTemplateGroup OBJECT-GROUP
OBJECTS
{
xdsl2LConfTempLineProfile,
xdsl2LConfTempChan1ConfProfile,
xdsl2LConfTempChan1RaRatioDs,
xdsl2LConfTempChan1RaRatioUs,
xdsl2LConfTempChan2ConfProfile,
xdsl2LConfTempChan2RaRatioDs,
xdsl2LConfTempChan2RaRatioUs,
xdsl2LConfTempChan3ConfProfile,
xdsl2LConfTempChan3RaRatioDs,
xdsl2LConfTempChan3RaRatioUs,
xdsl2LConfTempChan4ConfProfile,
xdsl2LConfTempChan4RaRatioDs,
xdsl2LConfTempChan4RaRatioUs,
xdsl2LConfTempRowStatus
}
STATUS current
DESCRIPTION
"The group of objects in a line configuration
template."
::= { xdsl2Groups 10 }
xdsl2LineConfProfGroup OBJECT-GROUP
OBJECTS
{
xdsl2LConfProfScMaskDs,
xdsl2LConfProfScMaskUs,
xdsl2LConfProfVdsl2CarMask,
xdsl2LConfProfRfiBands,
xdsl2LConfProfRaModeDs,
xdsl2LConfProfRaModeUs,
xdsl2LConfProfTargetSnrmDs,
xdsl2LConfProfTargetSnrmUs,
xdsl2LConfProfMaxSnrmDs,
xdsl2LConfProfMaxSnrmUs,
xdsl2LConfProfMinSnrmDs,
xdsl2LConfProfMinSnrmUs,
xdsl2LConfProfCeFlag,
xdsl2LConfProfSnrModeDs,
xdsl2LConfProfSnrModeUs,
xdsl2LConfProfTxRefVnDs,
xdsl2LConfProfTxRefVnUs,
xdsl2LConfProfXtuTransSysEna,
xdsl2LConfProfPmMode,
xdsl2LConfProfL0Time,
xdsl2LConfProfL2Time,
xdsl2LConfProfL2Atpr,
xdsl2LConfProfL2Atprt,
xdsl2LConfProfProfiles,
xdsl2LConfProfDpboEPsd,
xdsl2LConfProfDpboEsEL,
xdsl2LConfProfDpboEsCableModelA,
xdsl2LConfProfDpboEsCableModelB,
xdsl2LConfProfDpboEsCableModelC,
xdsl2LConfProfDpboMus,
xdsl2LConfProfDpboFMin,
xdsl2LConfProfDpboFMax,
xdsl2LConfProfUpboKL,
xdsl2LConfProfUpboKLF,
xdsl2LConfProfUs0Mask,
xdsl2LConfProfForceInp,
xdsl2LConfProfRowStatus
}
STATUS current
DESCRIPTION
"The group of objects in a line configuration
profile."
::= { xdsl2Groups 11 }
xdsl2LineConfProfRaGroup OBJECT-GROUP
OBJECTS
{
xdsl2LConfProfRaUsNrmDs,
xdsl2LConfProfRaUsNrmUs,
xdsl2LConfProfRaUsTimeDs,
xdsl2LConfProfRaUsTimeUs,
xdsl2LConfProfRaDsNrmDs,
xdsl2LConfProfRaDsNrmUs,
xdsl2LConfProfRaDsTimeDs,
xdsl2LConfProfRaDsTimeUs
}
STATUS current
DESCRIPTION
"The group of objects required for controlling the
rate-adaptive behavior of the line."
::= { xdsl2Groups 12 }
xdsl2LineConfProfMsgMinGroup OBJECT-GROUP
OBJECTS
{
xdsl2LConfProfMsgMinUs,
xdsl2LConfProfMsgMinDs
}
STATUS current
DESCRIPTION
"The group of objects required for controlling the rate
reserved for Overhead traffic."
::= { xdsl2Groups 13 }
xdsl2LineConfProfModeSpecGroup OBJECT-GROUP
OBJECTS
{
xdsl2LConfProfMaxNomPsdDs,
xdsl2LConfProfMaxNomPsdUs,
xdsl2LConfProfMaxNomAtpDs,
xdsl2LConfProfMaxNomAtpUs,
xdsl2LConfProfMaxAggRxPwrUs,
xdsl2LConfProfPsdMaskDs,
xdsl2LConfProfPsdMaskUs,
xdsl2LConfProfPsdMaskSelectUs,
xdsl2LConfProfClassMask,
xdsl2LConfProfLimitMask,
xdsl2LConfProfUs0Disable,
xdsl2LConfProfModeSpecRowStatus
}
STATUS current
DESCRIPTION
"The group of objects in a line configuration profile
that have an instance for each operation mode allowed."
::= { xdsl2Groups 14 }
xdsl2LineConfProfModeSpecBandUsGroup OBJECT-GROUP
OBJECTS
{
xdsl2LConfProfUpboPsdA,
xdsl2LConfProfUpboPsdB,
xdsl2LConfProfModeSpecBandUsRowStatus
}
STATUS current
DESCRIPTION
"The group of objects in a line configuration profile
that have several per-upstream-band instances for each
operation mode allowed."
::= { xdsl2Groups 15 }
xdsl2ChConfProfileGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChConfProfMinDataRateDs,
xdsl2ChConfProfMinDataRateUs,
xdsl2ChConfProfMaxDataRateDs,
xdsl2ChConfProfMaxDataRateUs,
xdsl2ChConfProfMinDataRateLowPwrDs,
xdsl2ChConfProfMinDataRateLowPwrUs,
xdsl2ChConfProfMaxDelayDs,
xdsl2ChConfProfMaxDelayUs,
xdsl2ChConfProfMinProtectionDs,
xdsl2ChConfProfMinProtectionUs,
xdsl2ChConfProfMinProtection8Ds,
xdsl2ChConfProfMinProtection8Us,
xdsl2ChConfProfMaxBerDs,
xdsl2ChConfProfMaxBerUs,
xdsl2ChConfProfUsDataRateDs,
xdsl2ChConfProfDsDataRateDs,
xdsl2ChConfProfUsDataRateUs,
xdsl2ChConfProfDsDataRateUs,
xdsl2ChConfProfRowStatus
}
STATUS current
DESCRIPTION
"The group of objects in a channel configuration
profile."
::= { xdsl2Groups 16 }
xdsl2ChConfProfileAtmGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChConfProfImaEnabled,
xdsl2ChStatusAtmStatus
}
STATUS current
DESCRIPTION
"The group of configuration objects required when the data
path is ATM."
::= { xdsl2Groups 17 }
xdsl2ChConfProfileMinResGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChConfProfMinResDataRateDs,
xdsl2ChConfProfMinResDataRateUs
}
STATUS current
DESCRIPTION
"The group of configuration objects required for the
reserved data rate."
::= { xdsl2Groups 18 }
xdsl2ChConfProfileOptAttrGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChConfProfMaxDelayVar,
xdsl2ChConfProfInitPolicy
}
STATUS current
DESCRIPTION
"The group of various optional channel configuration
parameters."
::= { xdsl2Groups 19 }
xdsl2LineAlarmConfTemplateGroup OBJECT-GROUP
OBJECTS
{
xdsl2LAlarmConfTempLineProfile,
xdsl2LAlarmConfTempChan1ConfProfile,
xdsl2LAlarmConfTempChan2ConfProfile,
xdsl2LAlarmConfTempChan3ConfProfile,
xdsl2LAlarmConfTempChan4ConfProfile,
xdsl2LAlarmConfTempRowStatus
}
STATUS current
DESCRIPTION
"The group of objects in a line alarm template."
::= { xdsl2Groups 20 }
xdsl2LineAlarmConfProfileGroup OBJECT-GROUP
OBJECTS
{
xdsl2LineAlarmConfProfileXtucThresh15MinFecs,
xdsl2LineAlarmConfProfileXtucThresh15MinEs,
xdsl2LineAlarmConfProfileXtucThresh15MinSes,
xdsl2LineAlarmConfProfileXtucThresh15MinLoss,
xdsl2LineAlarmConfProfileXtucThresh15MinUas,
xdsl2LineAlarmConfProfileXturThresh15MinFecs,
xdsl2LineAlarmConfProfileXturThresh15MinEs,
xdsl2LineAlarmConfProfileXturThresh15MinSes,
xdsl2LineAlarmConfProfileXturThresh15MinLoss,
xdsl2LineAlarmConfProfileXturThresh15MinUas,
xdsl2LineAlarmConfProfileThresh15MinFailedFullInt,
xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt,
xdsl2LineAlarmConfProfileRowStatus
}
STATUS current
DESCRIPTION
"The group of objects in a line alarm profile."
::= { xdsl2Groups 21 }
xdsl2ChAlarmConfProfileGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations,
xdsl2ChAlarmConfProfileXtucThresh15MinCorrected,
xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations,
xdsl2ChAlarmConfProfileXturThresh15MinCorrected,
xdsl2ChAlarmConfProfileRowStatus
}
STATUS current
DESCRIPTION
"The group of objects in a channel alarm profile."
::= { xdsl2Groups 22 }
xdsl2PMLineCurrGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLCurr15MValidIntervals,
xdsl2PMLCurr15MInvalidIntervals,
xdsl2PMLCurr15MTimeElapsed,
xdsl2PMLCurr15MFecs,
xdsl2PMLCurr15MEs,
xdsl2PMLCurr15MSes,
xdsl2PMLCurr15MLoss,
xdsl2PMLCurr15MUas,
xdsl2PMLCurr1DayValidIntervals,
xdsl2PMLCurr1DayInvalidIntervals,
xdsl2PMLCurr1DayTimeElapsed,
xdsl2PMLCurr1DayFecs,
xdsl2PMLCurr1DayEs,
xdsl2PMLCurr1DaySes,
xdsl2PMLCurr1DayLoss,
xdsl2PMLCurr1DayUas
}
STATUS current
DESCRIPTION
"The group of objects that report the line-level
counters for current PM intervals."
::= { xdsl2Groups 23 }
xdsl2PMLineInitCurrGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLInitCurr15MValidIntervals,
xdsl2PMLInitCurr15MInvalidIntervals,
xdsl2PMLInitCurr15MTimeElapsed,
xdsl2PMLInitCurr15MFullInits,
xdsl2PMLInitCurr15MFailedFullInits,
xdsl2PMLInitCurr1DayValidIntervals,
xdsl2PMLInitCurr1DayInvalidIntervals,
xdsl2PMLInitCurr1DayTimeElapsed,
xdsl2PMLInitCurr1DayFullInits,
xdsl2PMLInitCurr1DayFailedFullInits
}
STATUS current
DESCRIPTION
"The group of objects that report the full
initialization counters for current PM intervals."
::= { xdsl2Groups 24 }
xdsl2PMLineInitCurrShortGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLInitCurr15MShortInits,
xdsl2PMLInitCurr15MFailedShortInits,
xdsl2PMLInitCurr1DayShortInits,
xdsl2PMLInitCurr1DayFailedShortInits
}
STATUS current
DESCRIPTION
"The group of objects that report the short
initialization counters for current PM intervals."
::= { xdsl2Groups 25 }
xdsl2PMLineHist15MinGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLHist15MMonitoredTime,
xdsl2PMLHist15MFecs,
xdsl2PMLHist15MEs,
xdsl2PMLHist15MSes,
xdsl2PMLHist15MLoss,
xdsl2PMLHist15MUas,
xdsl2PMLHist15MValidInterval
}
STATUS current
DESCRIPTION
"The group of line-level PM counters for the previous
15-minute intervals."
::= { xdsl2Groups 26 }
xdsl2PMLineHist1DayGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLHist1DMonitoredTime,
xdsl2PMLHist1DFecs,
xdsl2PMLHist1DEs,
xdsl2PMLHist1DSes,
xdsl2PMLHist1DLoss,
xdsl2PMLHist1DUas,
xdsl2PMLHist1DValidInterval
}
STATUS current
DESCRIPTION
"The group of line-level PM counters for the previous
24-hour intervals."
::= { xdsl2Groups 27 }
xdsl2PMLineInitHist15MinGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLInitHist15MMonitoredTime,
xdsl2PMLInitHist15MFullInits,
xdsl2PMLInitHist15MFailedFullInits,
xdsl2PMLInitHist15MValidInterval
}
STATUS current
DESCRIPTION
"The group of PM counters for the previous 15-minute
interval full initializations."
::= { xdsl2Groups 28 }
xdsl2PMLineInitHist15MinShortGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLInitHist15MShortInits,
xdsl2PMLInitHist15MFailedShortInits
}
STATUS current
DESCRIPTION
"The group of PM counters for the previous 15-minute
interval short initializations."
::= { xdsl2Groups 29 }
xdsl2PMLineInitHist1DayGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLInitHist1DMonitoredTime,
xdsl2PMLInitHist1DFullInits,
xdsl2PMLInitHist1DFailedFullInits,
xdsl2PMLInitHist1DValidInterval
}
STATUS current
DESCRIPTION
"The group of PM counters for the previous 24-hour
interval full initializations."
::= { xdsl2Groups 30 }
xdsl2PMLineInitHist1DayShortGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMLInitHist1DShortInits,
xdsl2PMLInitHist1DFailedShortInits
}
STATUS current
DESCRIPTION
"The group of PM counters for the previous 24-hour
interval short initializations."
::= { xdsl2Groups 31 }
xdsl2PMChCurrGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMChCurr15MValidIntervals,
xdsl2PMChCurr15MInvalidIntervals,
xdsl2PMChCurr15MTimeElapsed,
xdsl2PMChCurr15MCodingViolations,
xdsl2PMChCurr15MCorrectedBlocks,
xdsl2PMChCurr1DayValidIntervals,
xdsl2PMChCurr1DayInvalidIntervals,
xdsl2PMChCurr1DayTimeElapsed,
xdsl2PMChCurr1DayCodingViolations,
xdsl2PMChCurr1DayCorrectedBlocks
}
STATUS current
DESCRIPTION
"The group of objects that report the channel-level
counters for current PM intervals."
::= { xdsl2Groups 32 }
xdsl2PMChHist15MinGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMChHist15MMonitoredTime,
xdsl2PMChHist15MCodingViolations,
xdsl2PMChHist15MCorrectedBlocks,
xdsl2PMChHist15MValidInterval
}
STATUS current
DESCRIPTION
"The group of objects that report the channel-level
counters for previous 15-minute PM intervals."
::= { xdsl2Groups 33 }
xdsl2PMChHist1DGroup OBJECT-GROUP
OBJECTS
{
xdsl2PMChHist1DMonitoredTime,
xdsl2PMChHist1DCodingViolations,
xdsl2PMChHist1DCorrectedBlocks,
xdsl2PMChHist1DValidInterval
}
STATUS current
DESCRIPTION
"The group of objects that report the channel-level
counters for previous 24-hour PM intervals."
::= { xdsl2Groups 34 }
xdsl2ScalarSCGroup OBJECT-GROUP
OBJECTS
{
xdsl2ScalarSCMaxInterfaces,
xdsl2ScalarSCAvailInterfaces
}
STATUS current
DESCRIPTION
"The group of objects that report the available memory
resources for DELT processes."
::= { xdsl2Groups 35 }
xdsl2ThreshNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
xdsl2LinePerfFECSThreshXtuc,
xdsl2LinePerfFECSThreshXtur,
xdsl2LinePerfESThreshXtuc,
xdsl2LinePerfESThreshXtur,
xdsl2LinePerfSESThreshXtuc,
xdsl2LinePerfSESThreshXtur,
xdsl2LinePerfLOSSThreshXtuc,
xdsl2LinePerfLOSSThreshXtur,
xdsl2LinePerfUASThreshXtuc,
xdsl2LinePerfUASThreshXtur,
xdsl2LinePerfCodingViolationsThreshXtuc,
xdsl2LinePerfCodingViolationsThreshXtur,
xdsl2LinePerfCorrectedThreshXtuc,
xdsl2LinePerfCorrectedThreshXtur,
xdsl2LinePerfFailedFullInitThresh,
xdsl2LinePerfFailedShortInitThresh
}
STATUS current
DESCRIPTION
"This group supports notifications of significant
conditions associated with DSL lines."
::= { xdsl2Groups 36 }
xdsl2StatusChangeNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
xdsl2LineStatusChangeXtuc,
xdsl2LineStatusChangeXtur
}
STATUS current
DESCRIPTION
"This group supports notifications of thresholds crossing
associated with DSL lines."
::= { xdsl2Groups 37 }
END
Reference in a new issue View git blame Copy permalink