Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2360 lines
73 KiB
Text
2360 lines
73 KiB
Text
SONET-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, transmission
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex
|
|
FROM IF-MIB
|
|
PerfCurrentCount, PerfIntervalCount
|
|
FROM PerfHist-TC-MIB;
|
|
|
|
-- This is the MIB module for the SONET/SDH Interface objects.
|
|
|
|
sonetMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200308110000Z"
|
|
ORGANIZATION "IETF AToM MIB Working Group"
|
|
CONTACT-INFO
|
|
"WG charter:
|
|
http://www.ietf.org/html.charters/atommib-charter.html
|
|
|
|
Mailing Lists:
|
|
General Discussion: atommib@research.telcordia.com
|
|
To Subscribe: atommib-request@research.telcordia.com
|
|
|
|
Kaj Tesink
|
|
Telcordia Technologies
|
|
Tel: (732) 758-5254
|
|
Fax: (732) 758-2269
|
|
E-mail: kaj@research.telcordia.com."
|
|
DESCRIPTION
|
|
"The MIB module to describe SONET/SDH interface objects.
|
|
|
|
Copyright (C) The Internet Society (2003). This version
|
|
of this MIB module is part of RFC 3592; see the RFC
|
|
itself for full legal notices."
|
|
REVISION "200308110000Z"
|
|
DESCRIPTION
|
|
"The key changes made to this MIB module
|
|
since its publication in RFC 2558
|
|
are as follows.
|
|
|
|
(1) Corrected typographical error
|
|
(bellcore1991(2) in sonetSESthresholdSet)
|
|
|
|
(2) Added support for sts192cSTM64(6) and
|
|
sts768cSTM256(7) in sonetPathCurrentWidth
|
|
|
|
(3) Corrected description of the applicability
|
|
of VTs for SDH for improved accuracy
|
|
|
|
(4) Added clarification in the SES description that
|
|
CV counts should be frozen during SESs
|
|
|
|
(5) Corrected typographical errors:
|
|
- Line Alarm Indication Signal description of the
|
|
Terminology section (20.5 --> 2.5 seconds)
|
|
- In the Terminology section
|
|
sonetSESThresholdSet --> sonetSESthresholdSet
|
|
"
|
|
REVISION "199810190000Z"
|
|
DESCRIPTION
|
|
"The RFC 2558 version of this MIB module.
|
|
The key changes made to this MIB module
|
|
since its initial publication in RFC 1595
|
|
are as follows.
|
|
|
|
(1) The MODULE-IDENTITY has been updated to reflect the
|
|
changes to the MIB.
|
|
|
|
(2) Where applicable, the textual conventions
|
|
PerfCurrentCount and PerfIntervalCount from
|
|
PerfHist-TC-MIB have been used in place of Gauge32.
|
|
|
|
(3) An agent now has the option to delay updates to
|
|
the various performance counts in lieu of performing
|
|
retroactive adjustments upon entering into or exiting
|
|
from unavailable time. This implementation option is
|
|
described in Appendix A of this memo.
|
|
|
|
(4) In order to make the SONET-MIB more useful for
|
|
circuit provisioning, the formerly read-only objects
|
|
sonetMediumType, sonetMediumLineCoding,
|
|
sonetMediumLineType, and sonetMediumCircuitIdentifier
|
|
have been given a MAX-ACCESS of read-write. The
|
|
MIN-ACCESS remains read-only.
|
|
|
|
(5) The DESCRIPTION clause for sonetMediumTimeElapsed has
|
|
been updated to describe its behaviour if the duration
|
|
of the current interval exceeds the maximum value.
|
|
|
|
(6) The DESCRIPTION clause for sonetMediumValidIntervals
|
|
has been updated to describe its behaviour when some
|
|
intervals may be unavailable, and the object
|
|
sonetMediumInvalidIntervals has been added to keep
|
|
count of the number of missing intervals (if any).
|
|
|
|
(7) The object sonetMediumLoopbackConfig has been added
|
|
to enable or disable loopback configurations.
|
|
|
|
(8) Because the error count thresholds for declaring
|
|
severely errored seconds that are specified in ANSI
|
|
T1.231-1993, ITU-T G.826-1995, and ANSI T1.231-1997
|
|
are all different from each other and from the thresholds
|
|
specified in RFC 1595, an enumerated INTEGER object
|
|
sonetSESthresholdSet has been added to allow an agent
|
|
to specify which threshold set is in use. Text has
|
|
been added to Section 3 stating that if this object is
|
|
not implemented the thresholds specified in RFC 1595
|
|
should be assumed, and the table containing those
|
|
thresholds has been moved to Appendix B of this memo.
|
|
(9) A column with SYNTAX TruthValue has been added to each
|
|
interval table. The purpose of the additional column
|
|
is to indicate, for each interval, whether the data
|
|
is valid in the sense intended by ANSI T1.231 clause
|
|
9.1.2.2 [T1.231a][T1.231b]. The objects in question are:
|
|
|
|
sonetSectionIntervalValidData
|
|
sonetLineIntervalValidData
|
|
sonetFarEndLineIntervalValidData
|
|
sonetPathIntervalValidData
|
|
sonetFarEndPathIntervalValidData
|
|
sonetVTIntervalValidData
|
|
sonetFarEndVTIntervalValidData
|
|
|
|
(10) The ranges for sonetPathCurrentStatus and
|
|
sonetVTCurrentStatus have been made consistent
|
|
with the DESCRIPTION clauses.
|
|
|
|
(11) The conformance information has been updated. Previous
|
|
conformance information from RFC 1595 has been
|
|
deprecated. Some typographical errors in the deprecated
|
|
section have been corrected in order to prevent
|
|
MIB compilation errors."
|
|
|
|
REVISION "199401030000Z"
|
|
DESCRIPTION
|
|
"The RFC 1595 version of this MIB module."
|
|
|
|
::= { transmission 39 }
|
|
|
|
-- This is the MIB module for the SONET/SDH objects
|
|
|
|
sonetObjects OBJECT IDENTIFIER ::= { sonetMIB 1 }
|
|
|
|
sonetObjectsPath OBJECT IDENTIFIER ::= { sonetMIB 2 }
|
|
|
|
sonetObjectsVT OBJECT IDENTIFIER ::= { sonetMIB 3 }
|
|
|
|
-- groups in the SONET/SDH MIB module
|
|
|
|
sonetMedium OBJECT IDENTIFIER ::= { sonetObjects 1 }
|
|
|
|
sonetSection OBJECT IDENTIFIER ::= { sonetObjects 2 }
|
|
|
|
sonetLine OBJECT IDENTIFIER ::= { sonetObjects 3 }
|
|
|
|
sonetFarEndLine OBJECT IDENTIFIER ::= { sonetObjects 4 }
|
|
|
|
sonetPath OBJECT IDENTIFIER ::= { sonetObjectsPath 1 }
|
|
|
|
sonetFarEndPath OBJECT IDENTIFIER ::= { sonetObjectsPath 2 }
|
|
|
|
sonetVT OBJECT IDENTIFIER ::= { sonetObjectsVT 1 }
|
|
|
|
sonetFarEndVT OBJECT IDENTIFIER ::= { sonetObjectsVT 2 }
|
|
|
|
-- the SONET/SDH Medium group
|
|
|
|
-- SONET/SDH interfaces for some applications may be electrical
|
|
-- interfaces and not optical interfaces. This group handles
|
|
-- the configuration information for both optical SONET/SDH
|
|
-- interfaces and electrical SONET/SDH interfaces.
|
|
|
|
sonetMediumTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetMediumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Medium table."
|
|
::= { sonetMedium 1 }
|
|
|
|
sonetMediumEntry OBJECT-TYPE
|
|
SYNTAX SonetMediumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Medium table."
|
|
INDEX { ifIndex }
|
|
::= { sonetMediumTable 1 }
|
|
|
|
SonetMediumEntry ::=
|
|
SEQUENCE {
|
|
sonetMediumType INTEGER,
|
|
sonetMediumTimeElapsed Integer32,
|
|
sonetMediumValidIntervals Integer32,
|
|
sonetMediumLineCoding INTEGER,
|
|
sonetMediumLineType INTEGER,
|
|
sonetMediumCircuitIdentifier DisplayString,
|
|
sonetMediumInvalidIntervals Integer32,
|
|
sonetMediumLoopbackConfig BITS
|
|
}
|
|
|
|
sonetMediumType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonet(1),
|
|
sdh(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies whether a SONET
|
|
or a SDH signal is used across this interface."
|
|
::= { sonetMediumEntry 1 }
|
|
|
|
sonetMediumTimeElapsed OBJECT-TYPE
|
|
SYNTAX Integer32 (1..900)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds, including partial seconds,
|
|
that have elapsed since the beginning of the current
|
|
measurement period. If, for some reason, such as an
|
|
adjustment in the system's time-of-day clock, the
|
|
current interval exceeds the maximum value, the
|
|
agent will return the maximum value."
|
|
::= { sonetMediumEntry 2 }
|
|
|
|
sonetMediumValidIntervals OBJECT-TYPE
|
|
SYNTAX Integer32 (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals
|
|
for which data was collected.
|
|
A SONET/SDH interface must be capable
|
|
of supporting at least n intervals.
|
|
The minimum value of n is 4.
|
|
The default of n is 32.
|
|
The maximum value of n is 96.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available. "
|
|
::= { sonetMediumEntry 3 }
|
|
|
|
sonetMediumLineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonetMediumOther(1),
|
|
sonetMediumB3ZS(2),
|
|
sonetMediumCMI(3),
|
|
sonetMediumNRZ(4),
|
|
sonetMediumRZ(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable describes the line coding for
|
|
this interface. The B3ZS and CMI are used for
|
|
electrical SONET/SDH signals (STS-1 and STS-3).
|
|
The Non-Return to Zero (NRZ) and the Return
|
|
to Zero are used for optical SONET/SDH signals."
|
|
::= { sonetMediumEntry 4 }
|
|
|
|
sonetMediumLineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonetOther(1),
|
|
sonetShortSingleMode(2),
|
|
sonetLongSingleMode(3),
|
|
sonetMultiMode(4),
|
|
sonetCoax(5),
|
|
sonetUTP(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable describes the line type for
|
|
this interface. The line types are
|
|
Short and Long Range
|
|
Single Mode fiber or Multi-Mode fiber interfaces,
|
|
and coax and UTP for electrical interfaces. The
|
|
value sonetOther should be used when the Line Type is
|
|
not one of the listed values."
|
|
::= { sonetMediumEntry 5 }
|
|
|
|
sonetMediumCircuitIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable contains the transmission
|
|
vendor's circuit identifier, for the
|
|
purpose of facilitating troubleshooting.
|
|
Note that the circuit identifier, if available,
|
|
is also represented by ifPhysAddress."
|
|
::= { sonetMediumEntry 6 }
|
|
|
|
sonetMediumInvalidIntervals OBJECT-TYPE
|
|
SYNTAX Integer32 (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to sonetMediumValidIntervals for which no
|
|
data is available. This object will typically
|
|
be zero except in cases where the data for some
|
|
intervals are not available (e.g., in proxy
|
|
situations)."
|
|
::= { sonetMediumEntry 7 }
|
|
|
|
sonetMediumLoopbackConfig OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
sonetNoLoop(0),
|
|
sonetFacilityLoop(1),
|
|
sonetTerminalLoop(2),
|
|
sonetOtherLoop(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current loopback state of the SONET/SDH interface. The
|
|
values mean:
|
|
|
|
sonetNoLoop
|
|
Not in the loopback state. A device that is not
|
|
capable of performing a loopback on this interface
|
|
shall always return this value.
|
|
|
|
sonetFacilityLoop
|
|
The received signal at this interface is looped back
|
|
out through the corresponding transmitter in the return
|
|
direction.
|
|
|
|
sonetTerminalLoop
|
|
The signal that is about to be transmitted is connected
|
|
to the associated incoming receiver.
|
|
|
|
sonetOtherLoop
|
|
Loopbacks that are not defined here."
|
|
|
|
::= { sonetMediumEntry 8 }
|
|
|
|
sonetSESthresholdSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
bellcore1991(2),
|
|
ansi1993(3),
|
|
itu1995(4),
|
|
ansi1997(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated integer indicating which
|
|
recognized set of SES thresholds that
|
|
the agent uses for determining severely
|
|
errored seconds and unavailable time.
|
|
|
|
other(1)
|
|
None of the following.
|
|
|
|
bellcore1991(2)
|
|
Bellcore TR-NWT-000253, 1991 [TR253], or
|
|
ANSI T1M1.3/93-005R2, 1993 [T1M1.3].
|
|
See also Appendix B.
|
|
|
|
ansi1993(3)
|
|
ANSI T1.231, 1993 [T1.231a], or
|
|
Bellcore GR-253-CORE, Issue 2, 1995 [GR253]
|
|
|
|
itu1995(4)
|
|
ITU Recommendation G.826, 1995 [G.826]
|
|
|
|
ansi1997(5)
|
|
ANSI T1.231, 1997 [T1.231b]
|
|
|
|
If a manager changes the value of this
|
|
object then the SES statistics collected
|
|
prior to this change must be invalidated."
|
|
::= { sonetMedium 2 }
|
|
|
|
-- the SONET/SDH Section group
|
|
|
|
-- this group consists of 2 tables:
|
|
-- - the SONET/SDH Section Current Table
|
|
-- - the SONET/SDH Section Interval Table
|
|
|
|
-- the SONET/SDH Section Current Table
|
|
|
|
-- The SONET/SDH Section
|
|
-- current table contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
|
|
|
|
sonetSectionCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetSectionCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Section Current table."
|
|
::= { sonetSection 1 }
|
|
|
|
sonetSectionCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetSectionCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Section Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetSectionCurrentTable 1 }
|
|
|
|
SonetSectionCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetSectionCurrentStatus Integer32,
|
|
sonetSectionCurrentESs PerfCurrentCount,
|
|
sonetSectionCurrentSESs PerfCurrentCount,
|
|
sonetSectionCurrentSEFSs PerfCurrentCount,
|
|
sonetSectionCurrentCVs PerfCurrentCount
|
|
}
|
|
|
|
sonetSectionCurrentStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the
|
|
status of the interface.
|
|
The sonetSectionCurrentStatus
|
|
is a bit map represented
|
|
as a sum, therefore,
|
|
it can represent multiple defects
|
|
simultaneously.
|
|
The sonetSectionNoDefect should be
|
|
set if and only if
|
|
no other flag is set.
|
|
|
|
The various bit positions are:
|
|
1 sonetSectionNoDefect
|
|
2 sonetSectionLOS
|
|
4 sonetSectionLOF"
|
|
::= { sonetSectionCurrentEntry 1 }
|
|
|
|
sonetSectionCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Errored
|
|
Seconds encountered by a SONET/SDH
|
|
Section in the current 15 minute interval."
|
|
::= { sonetSectionCurrentEntry 2 }
|
|
|
|
sonetSectionCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Section in the current 15
|
|
minute interval."
|
|
::= { sonetSectionCurrentEntry 3 }
|
|
|
|
sonetSectionCurrentSEFSs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Framing Seconds
|
|
encountered by a SONET/SDH Section in the current
|
|
15 minute interval."
|
|
::= { sonetSectionCurrentEntry 4 }
|
|
|
|
sonetSectionCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Section in the current 15 minute interval."
|
|
::= { sonetSectionCurrentEntry 5 }
|
|
|
|
-- the SONET/SDH Section Interval Table
|
|
|
|
-- The SONET/SDH Section Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetSectionIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetSectionIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Section Interval table."
|
|
::= { sonetSection 2 }
|
|
|
|
sonetSectionIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetSectionIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Section Interval table."
|
|
INDEX { ifIndex,
|
|
sonetSectionIntervalNumber }
|
|
::= { sonetSectionIntervalTable 1 }
|
|
|
|
SonetSectionIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetSectionIntervalNumber Integer32,
|
|
sonetSectionIntervalESs PerfIntervalCount,
|
|
sonetSectionIntervalSESs PerfIntervalCount,
|
|
sonetSectionIntervalSEFSs PerfIntervalCount,
|
|
sonetSectionIntervalCVs PerfIntervalCount,
|
|
sonetSectionIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetSectionIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetSectionIntervalEntry 1 }
|
|
|
|
sonetSectionIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Errored Seconds encountered
|
|
by a SONET/SDH Section in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetSectionIntervalEntry 2 }
|
|
|
|
sonetSectionIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Section in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetSectionIntervalEntry 3 }
|
|
|
|
sonetSectionIntervalSEFSs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Framing Seconds
|
|
encountered by a SONET/SDH Section in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetSectionIntervalEntry 4 }
|
|
|
|
sonetSectionIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Section in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetSectionIntervalEntry 5 }
|
|
|
|
|
|
sonetSectionIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetSectionIntervalEntry 6 }
|
|
|
|
-- the SONET/SDH Line group
|
|
|
|
-- this group consists of 2 tables:
|
|
-- - the SONET/SDH Line Current Table
|
|
-- - the SONET/SDH Line Interval Table
|
|
|
|
-- the SONET/SDH Line Current Table
|
|
|
|
-- The SONET/SDH Line
|
|
-- current table contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
|
|
sonetLineCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetLineCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Line Current table."
|
|
::= { sonetLine 1 }
|
|
|
|
sonetLineCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetLineCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Line Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetLineCurrentTable 1 }
|
|
|
|
SonetLineCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetLineCurrentStatus Integer32,
|
|
sonetLineCurrentESs PerfCurrentCount,
|
|
sonetLineCurrentSESs PerfCurrentCount,
|
|
sonetLineCurrentCVs PerfCurrentCount,
|
|
sonetLineCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
|
|
sonetLineCurrentStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the
|
|
status of the interface.
|
|
The sonetLineCurrentStatus
|
|
is a bit map represented
|
|
as a sum, therefore,
|
|
it can represent multiple defects
|
|
simultaneously.
|
|
The sonetLineNoDefect should be
|
|
set if and only if
|
|
no other flag is set.
|
|
|
|
The various bit positions are:
|
|
1 sonetLineNoDefect
|
|
2 sonetLineAIS
|
|
4 sonetLineRDI"
|
|
::= { sonetLineCurrentEntry 1 }
|
|
|
|
sonetLineCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Errored
|
|
Seconds encountered by a SONET/SDH
|
|
Line in the current 15 minute interval."
|
|
::= { sonetLineCurrentEntry 2 }
|
|
|
|
sonetLineCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Line in the current 15
|
|
minute
|
|
interval."
|
|
::= { sonetLineCurrentEntry 3 }
|
|
|
|
sonetLineCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Line in the current 15 minute interval."
|
|
::= { sonetLineCurrentEntry 4 }
|
|
|
|
sonetLineCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a SONET/SDH Line in the current 15
|
|
minute
|
|
interval."
|
|
::= { sonetLineCurrentEntry 5 }
|
|
|
|
-- the SONET/SDH Line Interval Table
|
|
|
|
-- The SONET/SDH Line Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetLineIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetLineIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Line Interval table."
|
|
::= { sonetLine 2 }
|
|
|
|
sonetLineIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetLineIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Line Interval table."
|
|
INDEX { ifIndex,
|
|
sonetLineIntervalNumber }
|
|
::= { sonetLineIntervalTable 1 }
|
|
|
|
SonetLineIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetLineIntervalNumber Integer32,
|
|
sonetLineIntervalESs PerfIntervalCount,
|
|
sonetLineIntervalSESs PerfIntervalCount,
|
|
sonetLineIntervalCVs PerfIntervalCount,
|
|
sonetLineIntervalUASs PerfIntervalCount,
|
|
sonetLineIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetLineIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetLineIntervalEntry 1 }
|
|
|
|
sonetLineIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Errored Seconds encountered
|
|
by a SONET/SDH Line in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetLineIntervalEntry 2 }
|
|
|
|
sonetLineIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Line in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetLineIntervalEntry 3 }
|
|
|
|
sonetLineIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Line in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetLineIntervalEntry 4 }
|
|
|
|
sonetLineIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the
|
|
number of Unavailable Seconds
|
|
encountered by a SONET/SDH Line in
|
|
a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetLineIntervalEntry 5 }
|
|
|
|
sonetLineIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetLineIntervalEntry 6 }
|
|
|
|
-- The SONET/SDH Far End Line group.
|
|
-- This group may only be implemented by SONET/SDH (LTEs)
|
|
-- systems that provide for a far end block error (FEBE)
|
|
-- information at the SONET/SDH Line Layer.
|
|
|
|
-- This group consists of two tables:
|
|
-- SONET/SDH Far End Line Current Table
|
|
-- SONET/SDH Far End Line Interval Table
|
|
|
|
-- The SONET/SDH Far End Line Current Table
|
|
|
|
-- The SONET/SDH Far End Line Current table contains
|
|
-- various statistics being
|
|
-- collected for the current 15 minute interval.
|
|
-- The statistics are collected from the far end
|
|
-- block error code (FEBE)
|
|
-- within the third Z2 byte of the Line Overhead
|
|
-- in Broadband ISDN applications.
|
|
-- The definitions are the same as described for
|
|
-- the near-end information.
|
|
|
|
sonetFarEndLineCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndLineCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End Line Current table."
|
|
::= { sonetFarEndLine 1 }
|
|
|
|
sonetFarEndLineCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndLineCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far End Line Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetFarEndLineCurrentTable 1 }
|
|
|
|
SonetFarEndLineCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndLineCurrentESs PerfCurrentCount,
|
|
sonetFarEndLineCurrentSESs PerfCurrentCount,
|
|
sonetFarEndLineCurrentCVs PerfCurrentCount,
|
|
sonetFarEndLineCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetFarEndLineCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far
|
|
End Errored Seconds encountered by a SONET/SDH
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndLineCurrentEntry 1 }
|
|
|
|
sonetFarEndLineCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH Medium/Section/Line
|
|
interface in the current 15 minute
|
|
interval."
|
|
::= { sonetFarEndLineCurrentEntry 2 }
|
|
|
|
sonetFarEndLineCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH Medium/Section/Line
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndLineCurrentEntry 3 }
|
|
|
|
sonetFarEndLineCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH Medium/Section/Line
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndLineCurrentEntry 4 }
|
|
|
|
-- The SONET/SDH Far End Line Interval Table
|
|
|
|
-- The SONET/SDH Far End Line Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetFarEndLineIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndLineIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End Line Interval table."
|
|
::= { sonetFarEndLine 2 }
|
|
|
|
sonetFarEndLineIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndLineIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far
|
|
End Line Interval table."
|
|
INDEX { ifIndex,
|
|
sonetFarEndLineIntervalNumber }
|
|
::= { sonetFarEndLineIntervalTable 1 }
|
|
|
|
SonetFarEndLineIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndLineIntervalNumber Integer32,
|
|
sonetFarEndLineIntervalESs PerfIntervalCount,
|
|
sonetFarEndLineIntervalSESs PerfIntervalCount,
|
|
sonetFarEndLineIntervalCVs PerfIntervalCount,
|
|
sonetFarEndLineIntervalUASs PerfIntervalCount,
|
|
sonetFarEndLineIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetFarEndLineIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetFarEndLineIntervalEntry 1 }
|
|
|
|
sonetFarEndLineIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Errored Seconds encountered
|
|
by a SONET/SDH Line
|
|
interface in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndLineIntervalEntry 2 }
|
|
|
|
sonetFarEndLineIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH Line
|
|
interface in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndLineIntervalEntry 3 }
|
|
|
|
sonetFarEndLineIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH Line
|
|
interface in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndLineIntervalEntry 4 }
|
|
|
|
sonetFarEndLineIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH Line
|
|
interface in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndLineIntervalEntry 5 }
|
|
|
|
sonetFarEndLineIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetFarEndLineIntervalEntry 6 }
|
|
|
|
-- the SONET/SDH Path group
|
|
|
|
-- this group consists of 2 tables:
|
|
-- - the SONET/SDH Path Current Table
|
|
-- - the SONET/SDH Path Interval Table
|
|
|
|
-- the SONET/SDH Path Current Table
|
|
|
|
-- The SONET/SDH Path
|
|
-- current table contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
|
|
sonetPathCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetPathCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Path Current table."
|
|
::= { sonetPath 1 }
|
|
|
|
sonetPathCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetPathCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Path Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetPathCurrentTable 1 }
|
|
|
|
SonetPathCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetPathCurrentWidth INTEGER,
|
|
sonetPathCurrentStatus Integer32,
|
|
sonetPathCurrentESs PerfCurrentCount,
|
|
sonetPathCurrentSESs PerfCurrentCount,
|
|
sonetPathCurrentCVs PerfCurrentCount,
|
|
sonetPathCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetPathCurrentWidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sts1(1),
|
|
sts3cSTM1(2),
|
|
sts12cSTM4(3),
|
|
sts24c(4),
|
|
sts48cSTM16(5),
|
|
sts192cSTM64(6),
|
|
sts768cSTM256(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that indicates the type of the SONET/SDH
|
|
Path. For SONET, the assigned types are
|
|
the STS-Nc SPEs, where N = 1, 3, 12, 24, 48, 192 and 768.
|
|
STS-1 is equal to 51.84 Mbps. For SDH, the assigned
|
|
types are the STM-Nc VCs, where N = 1, 4, 16, 64 and 256."
|
|
::= { sonetPathCurrentEntry 1 }
|
|
|
|
sonetPathCurrentStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (1..62)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the
|
|
status of the interface.
|
|
The sonetPathCurrentStatus
|
|
is a bit map represented
|
|
as a sum, therefore,
|
|
it can represent multiple defects
|
|
simultaneously.
|
|
The sonetPathNoDefect should be
|
|
set if and only if
|
|
no other flag is set.
|
|
|
|
The various bit positions are:
|
|
1 sonetPathNoDefect
|
|
2 sonetPathSTSLOP
|
|
4 sonetPathSTSAIS
|
|
8 sonetPathSTSRDI
|
|
16 sonetPathUnequipped
|
|
32 sonetPathSignalLabelMismatch"
|
|
::= { sonetPathCurrentEntry 2 }
|
|
|
|
sonetPathCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Errored
|
|
Seconds encountered by a SONET/SDH
|
|
Path in the current 15 minute interval."
|
|
::= { sonetPathCurrentEntry 3 }
|
|
|
|
sonetPathCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Path in the current 15
|
|
minute
|
|
interval."
|
|
::= { sonetPathCurrentEntry 4 }
|
|
|
|
sonetPathCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Path in the current 15 minute interval."
|
|
::= { sonetPathCurrentEntry 5 }
|
|
|
|
sonetPathCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a Path in the current
|
|
15 minute interval."
|
|
::= { sonetPathCurrentEntry 6 }
|
|
|
|
-- the SONET/SDH Path Interval Table
|
|
|
|
-- The SONET/SDH Path Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
|
|
|
|
|
|
sonetPathIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetPathIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Path Interval table."
|
|
::= { sonetPath 2 }
|
|
|
|
sonetPathIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetPathIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Path Interval table."
|
|
INDEX { ifIndex,
|
|
sonetPathIntervalNumber }
|
|
::= { sonetPathIntervalTable 1 }
|
|
|
|
SonetPathIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetPathIntervalNumber Integer32,
|
|
sonetPathIntervalESs PerfIntervalCount,
|
|
sonetPathIntervalSESs PerfIntervalCount,
|
|
sonetPathIntervalCVs PerfIntervalCount,
|
|
sonetPathIntervalUASs PerfIntervalCount,
|
|
sonetPathIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetPathIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetPathIntervalEntry 1 }
|
|
|
|
sonetPathIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Errored Seconds encountered
|
|
by a SONET/SDH Path in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetPathIntervalEntry 2 }
|
|
|
|
sonetPathIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Path in
|
|
a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetPathIntervalEntry 3 }
|
|
|
|
sonetPathIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Path in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetPathIntervalEntry 4 }
|
|
|
|
sonetPathIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a Path in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetPathIntervalEntry 5 }
|
|
|
|
sonetPathIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetPathIntervalEntry 6 }
|
|
|
|
-- The SONET/SDH Far End Path group
|
|
|
|
-- This group consists of two tables:
|
|
-- - SONET/SDH Far End Path Current Table
|
|
-- - SONET/SDH Far End Path Interval Table
|
|
|
|
-- The SONET/SDH Far End Path Current Table
|
|
|
|
-- The SONET/SDH Far End Path Current table
|
|
-- contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
-- The statistics are collected from
|
|
-- the far end block error code
|
|
-- (FEBE) within the G1 byte of the Path Overhead.
|
|
-- The definitions are the same as described for
|
|
-- the near-end information.
|
|
|
|
sonetFarEndPathCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndPathCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End Path Current table."
|
|
::= { sonetFarEndPath 1 }
|
|
|
|
sonetFarEndPathCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndPathCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far End Path Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetFarEndPathCurrentTable 1 }
|
|
|
|
SonetFarEndPathCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndPathCurrentESs PerfCurrentCount,
|
|
sonetFarEndPathCurrentSESs PerfCurrentCount,
|
|
sonetFarEndPathCurrentCVs PerfCurrentCount,
|
|
sonetFarEndPathCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetFarEndPathCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far
|
|
End Errored Seconds encountered by a SONET/SDH
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndPathCurrentEntry 1 }
|
|
|
|
sonetFarEndPathCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH Path
|
|
interface in the current 15 minute
|
|
interval."
|
|
::= { sonetFarEndPathCurrentEntry 2 }
|
|
|
|
sonetFarEndPathCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH Path interface in
|
|
the current 15 minute interval."
|
|
::= { sonetFarEndPathCurrentEntry 3 }
|
|
|
|
sonetFarEndPathCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH Path interface in
|
|
the current 15 minute interval."
|
|
::= { sonetFarEndPathCurrentEntry 4 }
|
|
|
|
|
|
-- The SONET/SDH Far End Path Interval Table
|
|
|
|
-- The SONET/SDH Far End Path Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetFarEndPathIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndPathIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End Path Interval table."
|
|
::= { sonetFarEndPath 2 }
|
|
|
|
sonetFarEndPathIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndPathIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far
|
|
End Path Interval table."
|
|
INDEX { ifIndex,
|
|
sonetFarEndPathIntervalNumber }
|
|
::= { sonetFarEndPathIntervalTable 1 }
|
|
|
|
SonetFarEndPathIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndPathIntervalNumber Integer32,
|
|
sonetFarEndPathIntervalESs PerfIntervalCount,
|
|
sonetFarEndPathIntervalSESs PerfIntervalCount,
|
|
sonetFarEndPathIntervalCVs PerfIntervalCount,
|
|
sonetFarEndPathIntervalUASs PerfIntervalCount,
|
|
sonetFarEndPathIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetFarEndPathIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetFarEndPathIntervalEntry 1 }
|
|
|
|
sonetFarEndPathIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Errored Seconds encountered
|
|
by a SONET/SDH Path interface in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndPathIntervalEntry 2 }
|
|
|
|
sonetFarEndPathIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH Path interface
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndPathIntervalEntry 3 }
|
|
|
|
sonetFarEndPathIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH Path interface
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndPathIntervalEntry 4 }
|
|
|
|
sonetFarEndPathIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH Path interface in
|
|
a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndPathIntervalEntry 5 }
|
|
|
|
sonetFarEndPathIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetFarEndPathIntervalEntry 6 }
|
|
|
|
-- the SONET/SDH Virtual Tributary group
|
|
|
|
-- this group consists of 2 tables:
|
|
-- - the SONET/SDH VT Current Table
|
|
-- - the SONET/SDH VT Interval Table
|
|
|
|
-- Corresponding SDH signals for SONET VTs are
|
|
-- as follows:
|
|
|
|
-- A VT1.5 = TU11
|
|
-- A VT2 = TU12
|
|
-- A VT3 = none
|
|
-- none = TU3
|
|
-- A VT6 = TU2
|
|
|
|
-- the SONET/SDH VT Current Table
|
|
|
|
-- The SONET/SDH VT current table
|
|
-- contains various statistics
|
|
-- being collected for the
|
|
-- current 15 minute interval.
|
|
|
|
sonetVTCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetVTCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH VT Current table."
|
|
::= { sonetVT 1 }
|
|
|
|
sonetVTCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetVTCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH VT Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetVTCurrentTable 1 }
|
|
|
|
SonetVTCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetVTCurrentWidth INTEGER,
|
|
sonetVTCurrentStatus Integer32,
|
|
sonetVTCurrentESs PerfCurrentCount,
|
|
sonetVTCurrentSESs PerfCurrentCount,
|
|
sonetVTCurrentCVs PerfCurrentCount,
|
|
sonetVTCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetVTCurrentWidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vtWidth15VC11(1),
|
|
vtWidth2VC12(2),
|
|
vtWidth3(3),
|
|
vtWidth6VC2(4),
|
|
vtWidth6c(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that indicates the type of the SONET
|
|
VT and SDH VC. Assigned widths are
|
|
VT1.5/VC11, VT2/VC12, VT3, VT6/VC2, and VT6c."
|
|
::= { sonetVTCurrentEntry 1 }
|
|
|
|
sonetVTCurrentStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (1..126)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the
|
|
status of the interface.
|
|
The sonetVTCurrentStatus
|
|
is a bit map represented
|
|
as a sum, therefore,
|
|
it can represent multiple defects
|
|
and failures
|
|
simultaneously.
|
|
The sonetVTNoDefect should be
|
|
set if and only if
|
|
no other flag is set.
|
|
|
|
The various bit positions are:
|
|
1 sonetVTNoDefect
|
|
2 sonetVTLOP
|
|
4 sonetVTPathAIS
|
|
8 sonetVTPathRDI
|
|
16 sonetVTPathRFI
|
|
32 sonetVTUnequipped
|
|
64 sonetVTSignalLabelMismatch"
|
|
::= { sonetVTCurrentEntry 2 }
|
|
|
|
sonetVTCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Errored
|
|
Seconds encountered by a SONET/SDH
|
|
VT in the current 15 minute interval."
|
|
::= { sonetVTCurrentEntry 3 }
|
|
|
|
sonetVTCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH VT in the current 15 minute
|
|
interval."
|
|
::= { sonetVTCurrentEntry 4 }
|
|
|
|
sonetVTCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH VT in the current 15 minute interval."
|
|
::= { sonetVTCurrentEntry 5 }
|
|
|
|
sonetVTCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a VT in the current
|
|
15 minute interval."
|
|
::= { sonetVTCurrentEntry 6 }
|
|
|
|
-- the SONET/SDH VT Interval Table
|
|
|
|
-- The SONET/SDH VT Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetVTIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetVTIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH VT Interval table."
|
|
::= { sonetVT 2 }
|
|
|
|
sonetVTIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetVTIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH VT Interval table."
|
|
INDEX { ifIndex,
|
|
sonetVTIntervalNumber }
|
|
::= { sonetVTIntervalTable 1 }
|
|
|
|
SonetVTIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetVTIntervalNumber Integer32,
|
|
sonetVTIntervalESs PerfIntervalCount,
|
|
sonetVTIntervalSESs PerfIntervalCount,
|
|
sonetVTIntervalCVs PerfIntervalCount,
|
|
sonetVTIntervalUASs PerfIntervalCount,
|
|
sonetVTIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetVTIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetVTIntervalEntry 1 }
|
|
|
|
sonetVTIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Errored Seconds encountered
|
|
by a SONET/SDH VT in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetVTIntervalEntry 2 }
|
|
|
|
sonetVTIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH VT
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetVTIntervalEntry 3 }
|
|
|
|
sonetVTIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH VT in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetVTIntervalEntry 4 }
|
|
|
|
sonetVTIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a VT in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetVTIntervalEntry 5 }
|
|
|
|
sonetVTIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetVTIntervalEntry 6 }
|
|
|
|
-- The SONET/SDH Far End VT group
|
|
|
|
-- This group consists of two tables:
|
|
-- SONET/SDH Far End VT Current Table
|
|
-- SONET/SDH Far End VT Interval Table
|
|
|
|
-- The SONET/SDH Far End VT Current
|
|
|
|
-- The SONET/SDH Far End VT Current table
|
|
-- contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
-- The statistics are collected from
|
|
-- the far end block error code
|
|
-- (FEBE) within the G1 byte of the VT Overhead.
|
|
|
|
|
|
|
|
-- The definitions are the same as described for
|
|
-- the near-end information.
|
|
|
|
sonetFarEndVTCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndVTCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End VT Current table."
|
|
::= { sonetFarEndVT 1 }
|
|
|
|
sonetFarEndVTCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndVTCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far End VT Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetFarEndVTCurrentTable 1 }
|
|
|
|
SonetFarEndVTCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndVTCurrentESs PerfCurrentCount,
|
|
sonetFarEndVTCurrentSESs PerfCurrentCount,
|
|
sonetFarEndVTCurrentCVs PerfCurrentCount,
|
|
sonetFarEndVTCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetFarEndVTCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far
|
|
End Errored Seconds encountered by a SONET/SDH
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndVTCurrentEntry 1 }
|
|
|
|
sonetFarEndVTCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH VT interface
|
|
in the current 15 minute
|
|
interval."
|
|
::= { sonetFarEndVTCurrentEntry 2 }
|
|
|
|
sonetFarEndVTCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH VT interface
|
|
in the current 15 minute interval."
|
|
::= { sonetFarEndVTCurrentEntry 3 }
|
|
|
|
sonetFarEndVTCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH VT interface
|
|
in the current 15 minute interval."
|
|
::= { sonetFarEndVTCurrentEntry 4 }
|
|
|
|
-- The SONET/SDH Far End VT Interval Table
|
|
|
|
-- The SONET/SDH Far End VT Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetFarEndVTIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndVTIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End VT Interval table."
|
|
::= { sonetFarEndVT 2 }
|
|
|
|
sonetFarEndVTIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndVTIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far
|
|
End VT Interval table."
|
|
INDEX { ifIndex,
|
|
sonetFarEndVTIntervalNumber }
|
|
::= { sonetFarEndVTIntervalTable 1 }
|
|
|
|
SonetFarEndVTIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndVTIntervalNumber Integer32,
|
|
sonetFarEndVTIntervalESs PerfIntervalCount,
|
|
sonetFarEndVTIntervalSESs PerfIntervalCount,
|
|
sonetFarEndVTIntervalCVs PerfIntervalCount,
|
|
sonetFarEndVTIntervalUASs PerfIntervalCount,
|
|
sonetFarEndVTIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetFarEndVTIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetFarEndVTIntervalEntry 1 }
|
|
|
|
sonetFarEndVTIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Errored Seconds encountered
|
|
by a SONET/SDH VT interface
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndVTIntervalEntry 2 }
|
|
|
|
sonetFarEndVTIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH VT interface
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndVTIntervalEntry 3 }
|
|
|
|
sonetFarEndVTIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH VT interface in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndVTIntervalEntry 4 }
|
|
|
|
sonetFarEndVTIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH VT interface in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndVTIntervalEntry 5 }
|
|
|
|
sonetFarEndVTIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetFarEndVTIntervalEntry 6 }
|
|
|
|
-- conformance information
|
|
|
|
sonetConformance OBJECT IDENTIFIER ::= { sonetMIB 4 }
|
|
|
|
sonetGroups OBJECT IDENTIFIER ::= { sonetConformance 1 }
|
|
sonetCompliances OBJECT IDENTIFIER ::= { sonetConformance 2 }
|
|
|
|
-- deprecated compliance statement
|
|
|
|
sonetCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SONET/SDH interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { sonetMediumStuff, sonetSectionStuff }
|
|
|
|
GROUP sonetLineStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH Lines,
|
|
Paths or Virtual Tributaries."
|
|
|
|
GROUP sonetFarEndLineStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate SONET/SDH Lines,
|
|
Paths or Virtual Tributaries, and that
|
|
provide for a far end block error (FEBE)
|
|
information at the SONET/SDH Line Layer."
|
|
|
|
GROUP sonetPathStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH
|
|
Paths or Virtual Tributaries."
|
|
|
|
OBJECT sonetPathCurrentWidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP sonetFarEndPathStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate SONET/SDH
|
|
Paths or Virtual Tributaries, and that process
|
|
Far End information."
|
|
GROUP sonetVTStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH Virtual
|
|
Tributaries."
|
|
|
|
OBJECT sonetVTCurrentWidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP sonetFarEndVTStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate the SONET/SDH
|
|
floating Virtual Tributaries, and that process
|
|
Far End information."
|
|
|
|
::= { sonetCompliances 1 }
|
|
|
|
-- current compliance statements
|
|
|
|
sonetCompliance2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SONET/SDH interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { sonetMediumStuff2, sonetSectionStuff2 }
|
|
|
|
OBJECT sonetMediumType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetMediumLineCoding
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetMediumLineType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetMediumCircuitIdentifier
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetMediumLoopbackConfig
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetSESthresholdSet
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and only one
|
|
of the enumerated values need be supported."
|
|
|
|
GROUP sonetLineStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH Lines,
|
|
Paths or Virtual Tributaries."
|
|
|
|
GROUP sonetFarEndLineStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate SONET/SDH Lines,
|
|
Paths or Virtual Tributaries, and that
|
|
provide for a far end block error (FEBE)
|
|
information at the SONET/SDH Line Layer."
|
|
|
|
GROUP sonetPathStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH
|
|
Paths or Virtual Tributaries."
|
|
|
|
OBJECT sonetPathCurrentWidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP sonetFarEndPathStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate SONET/SDH
|
|
Paths or Virtual Tributaries, and that process
|
|
Far End information."
|
|
|
|
GROUP sonetVTStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH Virtual
|
|
Tributaries."
|
|
|
|
OBJECT sonetVTCurrentWidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP sonetFarEndVTStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate the SONET/SDH
|
|
floating Virtual Tributaries, and that process
|
|
Far End information."
|
|
|
|
::= { sonetCompliances 2 }
|
|
|
|
-- units of conformance
|
|
|
|
-- deprecated groups
|
|
|
|
sonetMediumStuff OBJECT-GROUP
|
|
OBJECTS { sonetMediumType,
|
|
sonetMediumTimeElapsed,
|
|
sonetMediumValidIntervals,
|
|
sonetMediumLineCoding,
|
|
sonetMediumLineType,
|
|
sonetMediumCircuitIdentifier }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information applicable to all SONET/SDH interfaces."
|
|
::= { sonetGroups 1 }
|
|
|
|
sonetSectionStuff OBJECT-GROUP
|
|
OBJECTS { sonetSectionCurrentStatus,
|
|
sonetSectionCurrentESs,
|
|
sonetSectionCurrentSESs,
|
|
sonetSectionCurrentSEFSs,
|
|
sonetSectionCurrentCVs,
|
|
sonetSectionIntervalESs,
|
|
sonetSectionIntervalSESs,
|
|
sonetSectionIntervalSEFSs,
|
|
sonetSectionIntervalCVs
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Section interfaces."
|
|
::= { sonetGroups 2 }
|
|
|
|
sonetLineStuff OBJECT-GROUP
|
|
OBJECTS { sonetLineCurrentStatus,
|
|
sonetLineCurrentESs,
|
|
sonetLineCurrentSESs,
|
|
sonetLineCurrentCVs,
|
|
sonetLineCurrentUASs,
|
|
sonetLineIntervalESs,
|
|
sonetLineIntervalSESs,
|
|
sonetLineIntervalCVs,
|
|
sonetLineIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Line interfaces."
|
|
::= { sonetGroups 3 }
|
|
|
|
sonetFarEndLineStuff OBJECT-GROUP
|
|
OBJECTS { sonetFarEndLineCurrentESs,
|
|
sonetFarEndLineCurrentSESs,
|
|
sonetFarEndLineCurrentCVs,
|
|
sonetFarEndLineCurrentUASs,
|
|
sonetFarEndLineIntervalESs,
|
|
sonetFarEndLineIntervalSESs,
|
|
sonetFarEndLineIntervalCVs,
|
|
sonetFarEndLineIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Line interfaces,
|
|
and maintaining Line Far End information."
|
|
::= { sonetGroups 4 }
|
|
|
|
sonetPathStuff OBJECT-GROUP
|
|
OBJECTS { sonetPathCurrentWidth,
|
|
sonetPathCurrentStatus,
|
|
sonetPathCurrentESs,
|
|
sonetPathCurrentSESs,
|
|
sonetPathCurrentCVs,
|
|
sonetPathCurrentUASs,
|
|
sonetPathIntervalESs,
|
|
sonetPathIntervalSESs,
|
|
sonetPathIntervalCVs,
|
|
sonetPathIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Path interfaces."
|
|
::= { sonetGroups 5 }
|
|
|
|
sonetFarEndPathStuff OBJECT-GROUP
|
|
OBJECTS { sonetFarEndPathCurrentESs,
|
|
sonetFarEndPathCurrentSESs,
|
|
sonetFarEndPathCurrentCVs,
|
|
sonetFarEndPathCurrentUASs,
|
|
sonetFarEndPathIntervalESs,
|
|
sonetFarEndPathIntervalSESs,
|
|
sonetFarEndPathIntervalCVs,
|
|
sonetFarEndPathIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Path interfaces,
|
|
and maintaining Path Far End information."
|
|
::= { sonetGroups 6 }
|
|
|
|
sonetVTStuff OBJECT-GROUP
|
|
OBJECTS { sonetVTCurrentWidth,
|
|
sonetVTCurrentStatus,
|
|
sonetVTCurrentESs,
|
|
sonetVTCurrentSESs,
|
|
sonetVTCurrentCVs,
|
|
sonetVTCurrentUASs,
|
|
sonetVTIntervalESs,
|
|
sonetVTIntervalSESs,
|
|
sonetVTIntervalCVs,
|
|
sonetVTIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH VT interfaces."
|
|
::= { sonetGroups 7 }
|
|
|
|
sonetFarEndVTStuff OBJECT-GROUP
|
|
OBJECTS { sonetFarEndVTCurrentESs,
|
|
sonetFarEndVTCurrentSESs,
|
|
sonetFarEndVTCurrentCVs,
|
|
sonetFarEndVTCurrentUASs,
|
|
sonetFarEndVTIntervalESs,
|
|
sonetFarEndVTIntervalSESs,
|
|
sonetFarEndVTIntervalCVs,
|
|
sonetFarEndVTIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH VT interfaces,
|
|
and maintaining VT Far End information."
|
|
::= { sonetGroups 8 }
|
|
|
|
-- current groups
|
|
|
|
sonetMediumStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetMediumType,
|
|
sonetMediumTimeElapsed,
|
|
sonetMediumValidIntervals,
|
|
sonetMediumLineCoding,
|
|
sonetMediumLineType,
|
|
sonetMediumCircuitIdentifier,
|
|
sonetMediumInvalidIntervals,
|
|
sonetMediumLoopbackConfig,
|
|
sonetSESthresholdSet }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information applicable to all SONET/SDH interfaces."
|
|
::= { sonetGroups 9 }
|
|
|
|
sonetSectionStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetSectionCurrentStatus,
|
|
sonetSectionCurrentESs,
|
|
sonetSectionCurrentSESs,
|
|
sonetSectionCurrentSEFSs,
|
|
sonetSectionCurrentCVs,
|
|
sonetSectionIntervalESs,
|
|
sonetSectionIntervalSESs,
|
|
sonetSectionIntervalSEFSs,
|
|
sonetSectionIntervalCVs,
|
|
sonetSectionIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Section interfaces."
|
|
::= { sonetGroups 10 }
|
|
|
|
sonetLineStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetLineCurrentStatus,
|
|
sonetLineCurrentESs,
|
|
sonetLineCurrentSESs,
|
|
sonetLineCurrentCVs,
|
|
sonetLineCurrentUASs,
|
|
sonetLineIntervalESs,
|
|
sonetLineIntervalSESs,
|
|
sonetLineIntervalCVs,
|
|
sonetLineIntervalUASs,
|
|
sonetLineIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Line interfaces."
|
|
::= { sonetGroups 11 }
|
|
|
|
sonetPathStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetPathCurrentWidth,
|
|
sonetPathCurrentStatus,
|
|
sonetPathCurrentESs,
|
|
sonetPathCurrentSESs,
|
|
sonetPathCurrentCVs,
|
|
sonetPathCurrentUASs,
|
|
sonetPathIntervalESs,
|
|
sonetPathIntervalSESs,
|
|
sonetPathIntervalCVs,
|
|
sonetPathIntervalUASs,
|
|
sonetPathIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Path interfaces."
|
|
::= { sonetGroups 12 }
|
|
|
|
sonetVTStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetVTCurrentWidth,
|
|
sonetVTCurrentStatus,
|
|
sonetVTCurrentESs,
|
|
sonetVTCurrentSESs,
|
|
sonetVTCurrentCVs,
|
|
sonetVTCurrentUASs,
|
|
sonetVTIntervalESs,
|
|
sonetVTIntervalSESs,
|
|
sonetVTIntervalCVs,
|
|
sonetVTIntervalUASs,
|
|
sonetVTIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH VT interfaces."
|
|
::= { sonetGroups 13 }
|
|
|
|
sonetFarEndLineStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetFarEndLineCurrentESs,
|
|
sonetFarEndLineCurrentSESs,
|
|
sonetFarEndLineCurrentCVs,
|
|
sonetFarEndLineCurrentUASs,
|
|
sonetFarEndLineIntervalESs,
|
|
sonetFarEndLineIntervalSESs,
|
|
sonetFarEndLineIntervalCVs,
|
|
sonetFarEndLineIntervalUASs,
|
|
sonetFarEndLineIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Line interfaces,
|
|
and maintaining Line Far End information."
|
|
::= { sonetGroups 14 }
|
|
|
|
sonetFarEndPathStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetFarEndPathCurrentESs,
|
|
sonetFarEndPathCurrentSESs,
|
|
sonetFarEndPathCurrentCVs,
|
|
sonetFarEndPathCurrentUASs,
|
|
sonetFarEndPathIntervalESs,
|
|
sonetFarEndPathIntervalSESs,
|
|
sonetFarEndPathIntervalCVs,
|
|
sonetFarEndPathIntervalUASs,
|
|
sonetFarEndPathIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Path interfaces,
|
|
and maintaining Path Far End information."
|
|
::= { sonetGroups 15 }
|
|
|
|
sonetFarEndVTStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetFarEndVTCurrentESs,
|
|
sonetFarEndVTCurrentSESs,
|
|
sonetFarEndVTCurrentCVs,
|
|
sonetFarEndVTCurrentUASs,
|
|
sonetFarEndVTIntervalESs,
|
|
sonetFarEndVTIntervalSESs,
|
|
sonetFarEndVTIntervalCVs,
|
|
sonetFarEndVTIntervalUASs,
|
|
sonetFarEndVTIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH VT interfaces,
|
|
and maintaining VT Far End information."
|
|
::= { sonetGroups 16 }
|
|
|
|
END
|