Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1263 lines
45 KiB
Text
1263 lines
45 KiB
Text
-- *****************************************************************
|
|
-- RFC2127-MIB.my: ISDN MIB file
|
|
--
|
|
-- April 1998, Viet Nguyen
|
|
--
|
|
-- Copyright (c) 1998 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
--
|
|
-- This mib was extracted from RFC 2127
|
|
|
|
|
|
ISDN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE,
|
|
OBJECT-TYPE,
|
|
Counter32,
|
|
Gauge32,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString,
|
|
TruthValue,
|
|
TimeStamp,
|
|
RowStatus,
|
|
TestAndIncr,
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
-- NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex,
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
IANAifType
|
|
FROM IANAifType-MIB
|
|
transmission
|
|
FROM RFC1213-MIB;
|
|
|
|
isdnMib MODULE-IDENTITY
|
|
LAST-UPDATED "9609231642Z" -- Sep 23, 1996
|
|
ORGANIZATION "IETF ISDN MIB Working Group"
|
|
CONTACT-INFO
|
|
" Guenter Roeck
|
|
Postal: cisco Systems
|
|
170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
U.S.A.
|
|
Phone: +1 408 527 3143
|
|
E-mail: groeck@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module to describe the
|
|
management of ISDN interfaces."
|
|
::= { transmission 20 }
|
|
|
|
-- The ISDN hardware interface (BRI or PRI) is represented
|
|
-- by a media specific ifEntry.
|
|
--
|
|
-- For basic rate lines, the media specifics for the physical interface
|
|
-- is defined in the physical interface group of the ISDN MIB.
|
|
-- The ifType for physical basic rate interfaces is isdns(75)
|
|
-- or isdnu(76), whichever is appropriate.
|
|
--
|
|
-- For primary rate, the media specifics are defined in the Trunk
|
|
-- MIB and the ifType has a value of ds1(18).
|
|
|
|
-- Each signaling channel is represented by an entry
|
|
-- in the isdnSignalingTable.
|
|
-- The signaling channel has an ifType value of isdn(63).
|
|
-- Each B channel is also represented as an entry
|
|
-- in the ifTable. The B channels have an ifType value
|
|
-- of ds0(81).
|
|
-- This model is used while defining objects and tables
|
|
-- for management.
|
|
-- The ISDN MIB allows sub-layers. For example, the data transfer
|
|
-- over a B channel may take place with PPP encapsulation. While the
|
|
-- ISDN MIB describes the D and B channels, a media specific MIB
|
|
-- for PPP can be used on a layered basis. This is as per
|
|
-- the interfaces MIB.
|
|
|
|
-- Textual conventions
|
|
|
|
IsdnSignalingProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used as the syntax of the
|
|
isdnSignalingProtocol object in the
|
|
definition of ISDN-MIB's isdnSignalingTable.
|
|
|
|
The definition of this textual convention with the
|
|
addition of newly assigned values is published
|
|
periodically by the IANA, in either the Assigned
|
|
Numbers RFC, or some derivative of it specific to
|
|
Internet Network Management number assignments. (The
|
|
latest arrangements can be obtained by contacting the
|
|
IANA.)
|
|
|
|
Requests for new values should be made to IANA via
|
|
email (iana@iana.org)."
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
dss1(2), -- ITU DSS1 (formerly CCITT) Q.931
|
|
etsi(3), -- Europe / ETSI ETS300-102
|
|
-- plus supplementary services
|
|
-- (ETSI 300-xxx)
|
|
-- note that NET3, NET5 define
|
|
-- test procedures for ETS300-102
|
|
-- and have been replaced by
|
|
-- I-CTR 3 and I-CTR 4.
|
|
dass2(4), -- U.K. / DASS2 (PRI)
|
|
ess4(5), -- U.S.A. / AT&T 4ESS
|
|
ess5(6), -- U.S.A. / AT&T 5ESS
|
|
dms100(7), -- U.S.A. / Northern Telecom DMS100
|
|
dms250(8), -- U.S.A. / Northern Telecom DMS250
|
|
ni1(9), -- U.S.A. / National ISDN 1 (BRI)
|
|
ni2(10), -- U.S.A. / National ISDN 2 (BRI, PRI)
|
|
ni3(11), -- U.S.A. / next one
|
|
vn2(12), -- France / VN2
|
|
vn3(13), -- France / VN3
|
|
vn4(14), -- France / VN4 (ETSI with changes)
|
|
vn6(15), -- France / VN6 (ETSI with changes)
|
|
-- delta document CSE P 10-21 A
|
|
-- test document CSE P 10-20 A
|
|
kdd(16), -- Japan / KDD
|
|
ins64(17), -- Japan / NTT INS64
|
|
ins1500(18), -- Japan / NTT INS1500
|
|
itr6(19), -- Germany/ 1TR6 (BRI, PRI)
|
|
cornet(20), -- Germany/ Siemens HiCom CORNET
|
|
ts013(21), -- Australia / TS013
|
|
-- (formerly TPH 1962, BRI)
|
|
ts014(22), -- Australia / TS014
|
|
-- (formerly TPH 1856, PRI)
|
|
qsig(23), -- Q.SIG
|
|
swissnet2(24), -- SwissNet-2
|
|
swissnet3(25) -- SwissNet-3
|
|
}
|
|
|
|
-- Isdn Mib objects definitions
|
|
|
|
isdnMibObjects OBJECT IDENTIFIER ::= { isdnMib 1 }
|
|
|
|
-- ISDN physical interface group
|
|
|
|
-- This group describes physical basic rate interfaces.
|
|
|
|
isdnBasicRateGroup OBJECT IDENTIFIER ::= { isdnMibObjects 1 }
|
|
|
|
isdnBasicRateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnBasicRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing configuration and operational
|
|
parameters for all physical Basic Rate
|
|
interfaces on this managed device."
|
|
::= { isdnBasicRateGroup 1 }
|
|
|
|
isdnBasicRateEntry OBJECT-TYPE
|
|
SYNTAX IsdnBasicRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ISDN Basic Rate Table."
|
|
INDEX { ifIndex }
|
|
::= { isdnBasicRateTable 1 }
|
|
|
|
IsdnBasicRateEntry ::= SEQUENCE {
|
|
isdnBasicRateIfType INTEGER,
|
|
isdnBasicRateLineTopology INTEGER,
|
|
isdnBasicRateIfMode INTEGER,
|
|
isdnBasicRateSignalMode INTEGER
|
|
}
|
|
|
|
isdnBasicRateIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
isdns(75),
|
|
isdnu(76)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical interface type. For 'S/T' interfaces,
|
|
also called 'Four-wire Basic Access Interface',
|
|
the value of this object is isdns(75).
|
|
For 'U' interfaces, also called 'Two-wire Basic
|
|
Access Interface', the value of this object is
|
|
isdnu(76)."
|
|
::= { isdnBasicRateEntry 1 }
|
|
|
|
isdnBasicRateLineTopology OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pointToPoint(1),
|
|
pointToMultipoint(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The line topology to be used for this interface.
|
|
Note that setting isdnBasicRateIfType to isdns(75)
|
|
does not necessarily mean a line topology of
|
|
point-to-multipoint."
|
|
::= { isdnBasicRateEntry 2 }
|
|
|
|
isdnBasicRateIfMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
te(1),
|
|
nt(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical interface mode. For TE mode, the value
|
|
of this object is te(1). For NT mode, the value
|
|
of this object is nt(2)."
|
|
::= { isdnBasicRateEntry 3 }
|
|
|
|
isdnBasicRateSignalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
inactive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The signaling channel operational mode for this interface.
|
|
If active(1) there is a signaling channel on this
|
|
interface. If inactive(2) a signaling channel is
|
|
not available."
|
|
::= { isdnBasicRateEntry 4 }
|
|
|
|
-- The B channel (bearer channel) group
|
|
|
|
-- Note that disconnects can explicitely be handled using the
|
|
-- ifStack table. If a connection is to be disconnected,
|
|
-- the according ifStack entry has to be removed.
|
|
-- More specifically, the ifStackTable entry which binds the high-layer
|
|
-- ifTable entry (and related dialCtlNbrCfgTable entry) to the
|
|
-- B channel ifTable entry (and related isdnBearerTable entry)
|
|
-- during an active call has to be removed.
|
|
|
|
isdnBearerGroup OBJECT IDENTIFIER ::= { isdnMibObjects 2 }
|
|
|
|
isdnBearerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnBearerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines port specific operational, statistics
|
|
and active call data for ISDN B channels. Each entry
|
|
in this table describes one B (bearer) channel."
|
|
::= { isdnBearerGroup 1 }
|
|
|
|
isdnBearerEntry OBJECT-TYPE
|
|
SYNTAX IsdnBearerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational and statistics information relating to
|
|
one port. A port is a single B channel."
|
|
INDEX { ifIndex }
|
|
::= { isdnBearerTable 1 }
|
|
|
|
IsdnBearerEntry ::=
|
|
SEQUENCE {
|
|
isdnBearerChannelType INTEGER,
|
|
isdnBearerOperStatus INTEGER,
|
|
isdnBearerChannelNumber INTEGER,
|
|
isdnBearerPeerAddress DisplayString,
|
|
isdnBearerPeerSubAddress DisplayString,
|
|
isdnBearerCallOrigin INTEGER,
|
|
isdnBearerInfoType INTEGER,
|
|
isdnBearerMultirate TruthValue,
|
|
isdnBearerCallSetupTime TimeStamp,
|
|
isdnBearerCallConnectTime TimeStamp,
|
|
isdnBearerChargedUnits Gauge32
|
|
}
|
|
|
|
isdnBearerChannelType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dialup(1),
|
|
leased(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The B channel type. If the B channel is connected
|
|
to a dialup line, this object has a value of
|
|
dialup(1). In this case, it is controlled by
|
|
an associated signaling channel. If the B channel
|
|
is connected to a leased line, this object has
|
|
a value of leased(2). For leased line B channels, there
|
|
is no signaling channel control available."
|
|
::= { isdnBearerEntry 1 }
|
|
|
|
isdnBearerOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
connecting(2),
|
|
connected(3),
|
|
active(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current call control state for this port.
|
|
idle(1): The B channel is idle.
|
|
No call or call attempt is going on.
|
|
connecting(2): A connection attempt (outgoing call)
|
|
is being made on this interface.
|
|
connected(3): An incoming call is in the process
|
|
of validation.
|
|
active(4): A call is active on this interface."
|
|
::= { isdnBearerEntry 2 }
|
|
|
|
isdnBearerChannelNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier being used by a signaling protocol
|
|
to identify this B channel, also referred to as
|
|
B channel number. If the Agent also supports the DS0 MIB,
|
|
the values of isdnBearerChannelNumber and dsx0Ds0Number
|
|
must be identical for a given B channel."
|
|
::= { isdnBearerEntry 3 }
|
|
|
|
isdnBearerPeerAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISDN address the current or last call is or was
|
|
connected to.
|
|
|
|
In some cases, the format of this information can not
|
|
be predicted, since it largely depends on the type
|
|
of switch or PBX the device is connected to. Therefore,
|
|
the detailed format of this information is not
|
|
specified and is implementation dependent.
|
|
|
|
If possible, the agent should supply this information
|
|
using the E.164 format. In this case, the number must
|
|
start with '+'. Otherwise, IA5 number digits must be used.
|
|
|
|
If the peer ISDN address is not available,
|
|
this object has a length of zero."
|
|
REFERENCE
|
|
"ITU-T E.164, Q.931 chapter 4.5.10"
|
|
::= { isdnBearerEntry 4 }
|
|
|
|
isdnBearerPeerSubAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISDN subaddress the current or last call is or was
|
|
connected to.
|
|
|
|
The subaddress is an user supplied string of up to 20
|
|
IA5 characters and is transmitted transparently through
|
|
the network.
|
|
|
|
If the peer subaddress is not available, this object
|
|
has a length of zero."
|
|
REFERENCE
|
|
"ITU-T I.330, Q.931 chapter 4.5.11"
|
|
::= { isdnBearerEntry 5 }
|
|
|
|
isdnBearerCallOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
originate(2),
|
|
answer(3),
|
|
callback(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The call origin for the current or last call. If since
|
|
system startup there was no call on this interface,
|
|
this object has a value of unknown(1)."
|
|
::= { isdnBearerEntry 6 }
|
|
|
|
isdnBearerInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
speech(2),
|
|
unrestrictedDigital(3), -- as defined in Q.931
|
|
unrestrictedDigital56(4), -- with 56k rate adaption
|
|
restrictedDigital(5),
|
|
audio31(6), -- 3.1 kHz audio
|
|
audio7(7), -- 7 kHz audio
|
|
video(8),
|
|
packetSwitched(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Information Transfer Capability for the current
|
|
or last call.
|
|
|
|
speech(2) refers to a non-data connection, whereas
|
|
audio31(6) and audio7(7) refer to data mode connections.
|
|
|
|
Note that Q.931, chapter 4.5.5, originally defined
|
|
audio7(7) as '7 kHz audio' and now defines it as
|
|
'Unrestricted digital information with tones/
|
|
announcements'.
|
|
|
|
If since system startup there has been no call on this
|
|
interface, this object has a value of unknown(1)."
|
|
REFERENCE
|
|
"Q.931 [8], chapter 4.5.5, octet 3 of bearer capability
|
|
information element, combined with the User Rate
|
|
(as defined in octets 5 and 5a to 5d), if rate adaption
|
|
is being used."
|
|
::= { isdnBearerEntry 7 }
|
|
|
|
isdnBearerMultirate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag indicates if the current or last call used
|
|
multirate. The actual information transfer rate,
|
|
in detail specified in octet 4.1 (rate multiplier),
|
|
is the sum of all B channel ifSpeed values for
|
|
the hyperchannel.
|
|
|
|
If since system startup there was no call on this
|
|
interface, this object has a value of false(2)."
|
|
REFERENCE
|
|
"Q.931 [8], chapter 4.5.5."
|
|
::= { isdnBearerEntry 8 }
|
|
|
|
isdnBearerCallSetupTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when the ISDN setup message for
|
|
the current or last call was sent or received. If since
|
|
system startup there has been no call on this interface,
|
|
this object has a value of zero."
|
|
::= { isdnBearerEntry 9 }
|
|
|
|
isdnBearerCallConnectTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when the ISDN connect message for
|
|
the current or last call was sent or received. If since
|
|
system startup there has been no call on this interface,
|
|
this object has a value of zero."
|
|
::= { isdnBearerEntry 10 }
|
|
|
|
isdnBearerChargedUnits OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of charged units for the current or last
|
|
connection. For incoming calls or if charging information
|
|
is not supplied by the switch, the value of this object
|
|
is zero."
|
|
::= { isdnBearerEntry 11 }
|
|
|
|
-- ISDN signaling group
|
|
|
|
isdnSignalingGroup OBJECT IDENTIFIER ::= { isdnMibObjects 3 }
|
|
|
|
-- signaling channel configuration table
|
|
-- There is one entry in this table for each Terminal Endpoint
|
|
-- (link layer connection to the switch).
|
|
-- Usually, there is one endpoint per D channel. In some
|
|
-- cases, however, there can be multiple endpoints.
|
|
-- Thus, entries in this table can be created and deleted.
|
|
-- This also means the creation of an associated ifEntry.
|
|
--
|
|
-- D channel backup and NFAS trunks are handled using the
|
|
-- ifStack table.
|
|
-- In case of D channel backup, there are multiple
|
|
-- Data Link Layer (LAPD) interfaces. Only one interface is
|
|
-- active; all others are dormant(5).
|
|
-- In case of NFAS trunks, one lower interface is the
|
|
-- LAPD interface, while the other lower interfaces are physical
|
|
-- interfaces.
|
|
|
|
-- If directory number and calling address differ from each other
|
|
-- or multiple directory numbers are being used,
|
|
-- the isdnDirectoryTable has to be used to enter such
|
|
-- directory numbers.
|
|
|
|
isdnSignalingGetIndex OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The recommended procedure for selecting a new index for
|
|
isdnSignalingTable row creation is to GET the value of
|
|
this object, and then to SET the object with the same
|
|
value. If the SET operation succeeds, the manager can use
|
|
this value as an index to create a new row in this table."
|
|
REFERENCE
|
|
"RFC1903, TestAndIncr textual convention."
|
|
::= { isdnSignalingGroup 1 }
|
|
|
|
isdnSignalingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnSignalingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISDN signaling table containing configuration and
|
|
operational parameters for all ISDN signaling
|
|
channels on this managed device."
|
|
::= { isdnSignalingGroup 2 }
|
|
|
|
isdnSignalingEntry OBJECT-TYPE
|
|
SYNTAX IsdnSignalingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ISDN Signaling Table. To create a new
|
|
entry, only isdnSignalingProtocol needs to be specified
|
|
before isdnSignalingStatus can become active(1)."
|
|
INDEX { isdnSignalingIndex }
|
|
::= { isdnSignalingTable 1 }
|
|
|
|
IsdnSignalingEntry ::= SEQUENCE {
|
|
isdnSignalingIndex INTEGER,
|
|
isdnSignalingIfIndex InterfaceIndex,
|
|
isdnSignalingProtocol IsdnSignalingProtocol,
|
|
isdnSignalingCallingAddress DisplayString,
|
|
isdnSignalingSubAddress DisplayString,
|
|
isdnSignalingBchannelCount Integer32,
|
|
isdnSignalingInfoTrapEnable INTEGER,
|
|
isdnSignalingStatus RowStatus
|
|
}
|
|
|
|
isdnSignalingIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies an entry
|
|
in the isdnSignalingTable."
|
|
::= { isdnSignalingEntry 1 }
|
|
|
|
isdnSignalingIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface associated with this
|
|
signaling channel."
|
|
::= { isdnSignalingEntry 2 }
|
|
|
|
isdnSignalingProtocol OBJECT-TYPE
|
|
SYNTAX IsdnSignalingProtocol
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The particular protocol type supported by the
|
|
switch providing access to the ISDN network
|
|
to which this signaling channel is connected."
|
|
::= { isdnSignalingEntry 3 }
|
|
|
|
isdnSignalingCallingAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISDN Address to be assigned to this signaling
|
|
channel. More specifically, this is the 'Calling Address
|
|
information element' as being passed to the switch
|
|
in outgoing call setup messages.
|
|
|
|
It can be an EAZ (1TR6), a calling number (DSS1, ETSI)
|
|
or any other number necessary to identify a signaling
|
|
interface. If there is no such number defined or required,
|
|
this is a zero length string. It is represented in
|
|
DisplayString form.
|
|
|
|
Incoming calls can also be identified by this number.
|
|
If the Directory Number, i.e. the Called Number in
|
|
incoming calls, is different to this number, the
|
|
isdnDirectoryTable has to be used to specify all
|
|
possible Directory Numbers.
|
|
|
|
The format of this information largely depends on the type
|
|
of switch or PBX the device is connected to. Therefore,
|
|
the detailed format of this information is not
|
|
specified and is implementation dependent.
|
|
|
|
If possible, the agent should implement this information
|
|
using the E.164 number format. In this case, the number
|
|
must start with '+'. Otherwise, IA5 number digits must
|
|
be used."
|
|
REFERENCE
|
|
"ITU-T E.164, Q.931 chapter 4.5.10"
|
|
DEFVAL { "" }
|
|
::= { isdnSignalingEntry 4 }
|
|
|
|
isdnSignalingSubAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supplementary information to the ISDN address assigned
|
|
to this signaling channel. Usually, this is the
|
|
subaddress as defined in Q.931.
|
|
If there is no such number defined or required, this is
|
|
a zero length string.
|
|
The subaddress is used for incoming calls as well as
|
|
for outgoing calls.
|
|
The subaddress is an user supplied string of up to 20
|
|
IA5 characters and is transmitted transparently through
|
|
the network."
|
|
REFERENCE
|
|
"ITU-T I.330, Q.931 chapter 4.5.11"
|
|
DEFVAL { "" }
|
|
::= { isdnSignalingEntry 5 }
|
|
|
|
isdnSignalingBchannelCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of B channels (bearer channels)
|
|
managed by this signaling channel. The default value
|
|
of this object depends on the physical interface type
|
|
and is either 2 for Basic Rate interfaces or
|
|
24 (30) for Primary Rate interfaces."
|
|
::= { isdnSignalingEntry 6 }
|
|
|
|
isdnSignalingInfoTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether isdnMibCallInformation traps
|
|
should be generated for calls on this signaling
|
|
channel."
|
|
DEFVAL { disabled }
|
|
::= { isdnSignalingEntry 7 }
|
|
|
|
isdnSignalingStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete rows in the
|
|
isdnSignalingTable."
|
|
::= { isdnSignalingEntry 8 }
|
|
|
|
-- Signaling channel statistics table
|
|
-- There is one entry for each signaling connection
|
|
-- in this table.
|
|
-- Note that the ifEntry also has some statistics information.
|
|
|
|
isdnSignalingStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnSignalingStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISDN signaling table containing statistics
|
|
information for all ISDN signaling channels
|
|
on this managed device.
|
|
Only statistical information which is not already being
|
|
counted in the ifTable is being defined in this table."
|
|
::= { isdnSignalingGroup 3 }
|
|
|
|
isdnSignalingStatsEntry OBJECT-TYPE
|
|
SYNTAX IsdnSignalingStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ISDN Signaling statistics Table."
|
|
AUGMENTS { isdnSignalingEntry }
|
|
::= { isdnSignalingStatsTable 1 }
|
|
|
|
IsdnSignalingStatsEntry ::= SEQUENCE {
|
|
isdnSigStatsInCalls Counter32,
|
|
isdnSigStatsInConnected Counter32,
|
|
isdnSigStatsOutCalls Counter32,
|
|
isdnSigStatsOutConnected Counter32,
|
|
isdnSigStatsChargedUnits Counter32
|
|
}
|
|
|
|
isdnSigStatsInCalls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of incoming calls on this interface."
|
|
::= { isdnSignalingStatsEntry 1 }
|
|
|
|
isdnSigStatsInConnected OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of incoming calls on this interface
|
|
which were actually connected."
|
|
::= { isdnSignalingStatsEntry 2 }
|
|
|
|
isdnSigStatsOutCalls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outgoing calls on this interface."
|
|
::= { isdnSignalingStatsEntry 3 }
|
|
|
|
isdnSigStatsOutConnected OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outgoing calls on this interface
|
|
which were actually connected."
|
|
::= { isdnSignalingStatsEntry 4 }
|
|
|
|
isdnSigStatsChargedUnits OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of charging units on this interface since
|
|
system startup.
|
|
Only the charging units applying to the local interface,
|
|
i.e. for originated calls or for calls with 'Reverse
|
|
charging' being active, are counted here."
|
|
::= { isdnSignalingStatsEntry 5 }
|
|
|
|
--
|
|
-- The LAPD table
|
|
|
|
isdnLapdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnLapdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing configuration and statistics
|
|
information for all LAPD (D channel Data Link)
|
|
interfaces on this managed device.
|
|
Only statistical information which is not already being
|
|
counted in the ifTable is being defined in this table."
|
|
::= { isdnSignalingGroup 4 }
|
|
|
|
isdnLapdEntry OBJECT-TYPE
|
|
SYNTAX IsdnLapdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the LAPD Table."
|
|
INDEX { ifIndex }
|
|
::= { isdnLapdTable 1 }
|
|
|
|
IsdnLapdEntry ::= SEQUENCE {
|
|
isdnLapdPrimaryChannel TruthValue,
|
|
isdnLapdOperStatus INTEGER,
|
|
isdnLapdPeerSabme Counter32,
|
|
isdnLapdRecvdFrmr Counter32
|
|
}
|
|
|
|
isdnLapdPrimaryChannel OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), this D channel is the designated
|
|
primary D channel if D channel backup is active.
|
|
There must be exactly one primary D channel
|
|
configured. If D channel backup is not used, this
|
|
object has a value of true(1)."
|
|
REFERENCE
|
|
"Q.931 [8], Annex F, D channel backup procedures."
|
|
::= { isdnLapdEntry 1 }
|
|
|
|
isdnLapdOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
l1Active(2),
|
|
l2Active(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of this interface:
|
|
|
|
inactive all layers are inactive
|
|
l1Active layer 1 is activated,
|
|
layer 2 datalink not established
|
|
l2Active layer 1 is activated,
|
|
layer 2 datalink established."
|
|
::= { isdnLapdEntry 2 }
|
|
|
|
isdnLapdPeerSabme OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of peer SABME frames received on this
|
|
interface. This is the number of peer-initiated
|
|
new connections on this interface."
|
|
::= { isdnLapdEntry 3 }
|
|
|
|
isdnLapdRecvdFrmr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LAPD FRMR response frames received.
|
|
This is the number of framing errors on this
|
|
interface."
|
|
::= { isdnLapdEntry 4 }
|
|
|
|
--
|
|
-- Optional groups follow here.
|
|
|
|
-- The Terminal Endpoint group and table
|
|
|
|
-- This table is required only if TEI values or SPID numbers
|
|
-- have to be entered.
|
|
-- The ifIndex values for this table are identical to those of
|
|
-- the isdnSignalingChannel table.
|
|
|
|
isdnEndpointGroup OBJECT IDENTIFIER ::= { isdnMibObjects 4 }
|
|
|
|
isdnEndpointGetIndex OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The recommended procedure for selecting a new index for
|
|
isdnEndpointTable row creation is to GET the value of
|
|
this object, and then to SET the object with the same
|
|
value. If the SET operation succeeds, the manager can use
|
|
this value as an index to create a new row in this table."
|
|
REFERENCE
|
|
"RFC1903, TestAndIncr textual convention."
|
|
::= { isdnEndpointGroup 1 }
|
|
|
|
isdnEndpointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnEndpointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing configuration for Terminal
|
|
Endpoints."
|
|
::= { isdnEndpointGroup 2 }
|
|
|
|
isdnEndpointEntry OBJECT-TYPE
|
|
SYNTAX IsdnEndpointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Terminal Endpoint Table. The value
|
|
of isdnEndpointIfType must be supplied for a row
|
|
in this table to become active."
|
|
INDEX { isdnEndpointIndex }
|
|
::= { isdnEndpointTable 1 }
|
|
|
|
IsdnEndpointEntry ::= SEQUENCE {
|
|
isdnEndpointIndex INTEGER,
|
|
isdnEndpointIfIndex InterfaceIndex,
|
|
isdnEndpointIfType IANAifType,
|
|
isdnEndpointTeiType INTEGER,
|
|
isdnEndpointTeiValue INTEGER,
|
|
isdnEndpointSpid DisplayString,
|
|
isdnEndpointStatus RowStatus
|
|
}
|
|
|
|
isdnEndpointIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies an entry
|
|
in the isdnEndpointTable."
|
|
::= { isdnEndpointEntry 1 }
|
|
|
|
isdnEndpointIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface associated with this
|
|
Terminal Endpoint."
|
|
::= { isdnEndpointEntry 2 }
|
|
|
|
isdnEndpointIfType OBJECT-TYPE
|
|
SYNTAX IANAifType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type for this Terminal Endpoint.
|
|
Interface types of x25ple(40) and isdn(63) are allowed.
|
|
The interface type is identical to the value of
|
|
ifType in the associated ifEntry."
|
|
::= { isdnEndpointEntry 3 }
|
|
|
|
isdnEndpointTeiType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of TEI (Terminal Endpoint Identifier)
|
|
used for this Terminal Endpoint. In case of dynamic(1),
|
|
the TEI value is selected by the switch. In
|
|
case of static(2), a valid TEI value has to be
|
|
entered in the isdnEndpointTeiValue object.
|
|
The default value for this object depends on the
|
|
interface type as well as the Terminal Endpoint type.
|
|
On Primary Rate interfaces the default value is
|
|
static(2). On Basic Rate interfaces the default value
|
|
is dynamic(1) for isdn(63) Terminal Endpoints and
|
|
static(2) for x25ple(40) Terminal Endpoints."
|
|
::= { isdnEndpointEntry 4 }
|
|
|
|
isdnEndpointTeiValue OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..255 )
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TEI (Terminal Endpoint Identifier) value
|
|
for this Terminal Endpoint. If isdnEndpointTeiType
|
|
is set to static(2), valid numbers are 0..63,
|
|
while otherwise the value is set internally.
|
|
The default value of this object is 0 for static
|
|
TEI assignment.
|
|
The default value for dynamic TEI assignment is also
|
|
0 as long as no TEI has been assigned. After TEI
|
|
assignment, the assigned TEI value is returned."
|
|
::= { isdnEndpointEntry 5 }
|
|
|
|
isdnEndpointSpid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service profile IDentifier (SPID) information
|
|
for this Terminal Endpoint.
|
|
|
|
The SPID is composed of 9-20 numeric characters.
|
|
|
|
This information has to be defined in addition to
|
|
the local number for some switch protocol types,
|
|
e.g. Bellcore NI-1 and NI-2.
|
|
|
|
If this object is not required, it is a
|
|
zero length string."
|
|
REFERENCE
|
|
"Bellcore SR-NWT-001953, Generic Guidelines for ISDN
|
|
Terminal Equipment on Basic Access Interfaces,
|
|
Chapter 8.5.1."
|
|
DEFVAL { "" }
|
|
::= { isdnEndpointEntry 6 }
|
|
|
|
isdnEndpointStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete rows in the
|
|
isdnEndpointTable."
|
|
::= { isdnEndpointEntry 7 }
|
|
|
|
--
|
|
-- The Directory Number group
|
|
--
|
|
|
|
isdnDirectoryGroup OBJECT IDENTIFIER ::= { isdnMibObjects 5 }
|
|
|
|
isdnDirectoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnDirectoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing Directory Numbers."
|
|
::= { isdnDirectoryGroup 1 }
|
|
|
|
isdnDirectoryEntry OBJECT-TYPE
|
|
SYNTAX IsdnDirectoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Directory Number Table. All objects
|
|
in an entry must be set for a new row to become active."
|
|
INDEX { isdnDirectoryIndex }
|
|
::= { isdnDirectoryTable 1 }
|
|
|
|
IsdnDirectoryEntry ::= SEQUENCE {
|
|
isdnDirectoryIndex INTEGER,
|
|
isdnDirectoryNumber DisplayString,
|
|
isdnDirectorySigIndex INTEGER,
|
|
isdnDirectoryStatus RowStatus
|
|
}
|
|
|
|
isdnDirectoryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..'7fffffff'h )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies an entry
|
|
in the isdnDirectoryTable."
|
|
::= { isdnDirectoryEntry 1 }
|
|
|
|
isdnDirectoryNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Directory Number. Directory Numbers are used
|
|
to identify incoming calls on the signaling
|
|
channel given in isdnDirectorySigIndex.
|
|
|
|
The format of this information largely depends on the type
|
|
of switch or PBX the device is connected to. Therefore,
|
|
the detailed format of this information is not
|
|
specified and is implementation dependent.
|
|
|
|
If possible, the agent should implement this information
|
|
using the E.164 number format. In this case, the number
|
|
must start with '+'. Otherwise, IA5 number digits must
|
|
be used."
|
|
REFERENCE
|
|
"ITU-T E.164, Q.931 chapter 4.5.10"
|
|
::= { isdnDirectoryEntry 2 }
|
|
|
|
isdnDirectorySigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index pointing to an ISDN signaling channel.
|
|
Incoming calls are accepted on this
|
|
signaling channel if the isdnDirectoryNumber is
|
|
presented as Called Number in the SETUP message."
|
|
::= { isdnDirectoryEntry 3 }
|
|
|
|
isdnDirectoryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete rows in the
|
|
isdnDirectoryTable."
|
|
::= { isdnDirectoryEntry 4 }
|
|
|
|
-- Traps
|
|
|
|
isdnMibTrapPrefix OBJECT IDENTIFIER ::= { isdnMib 2 }
|
|
isdnMibTraps OBJECT IDENTIFIER ::= { isdnMibTrapPrefix 0 }
|
|
|
|
isdnMibCallInformation NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex, -- isdnBearerTable ifIndex
|
|
isdnBearerOperStatus,
|
|
isdnBearerPeerAddress,
|
|
isdnBearerPeerSubAddress,
|
|
isdnBearerCallSetupTime,
|
|
isdnBearerInfoType,
|
|
isdnBearerCallOrigin
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap/inform is sent to the manager under the
|
|
following condidions:
|
|
- on incoming calls for each call which is rejected for
|
|
policy reasons (e.g. unknown neighbor or access
|
|
violation)
|
|
- on outgoing calls whenever a call attempt is determined
|
|
to have ultimately failed. In the event that call retry
|
|
is active, then this will be after all retry attempts
|
|
have failed.
|
|
- whenever a call connects. In this case, the object
|
|
isdnBearerCallConnectTime should be included in the
|
|
trap.
|
|
|
|
Only one such trap is sent in between successful or
|
|
unsuccessful call attempts from or to a single neighbor;
|
|
subsequent call attempts result in no trap.
|
|
|
|
If the Dial Control MIB objects dialCtlNbrCfgId and
|
|
dialCtlNbrCfgIndex are known by the entity generating
|
|
this trap, both objects should be included in the trap
|
|
as well. The receipt of this trap with no dial neighbor
|
|
information indicates that the manager must poll the
|
|
callHistoryTable of the Dial Control MIB to see what
|
|
changed."
|
|
::= { isdnMibTraps 1 }
|
|
|
|
--
|
|
-- conformance information
|
|
--
|
|
|
|
isdnMibConformance OBJECT IDENTIFIER ::= { isdnMib 3 }
|
|
isdnMibCompliances OBJECT IDENTIFIER ::= { isdnMibConformance 1 }
|
|
isdnMibGroups OBJECT IDENTIFIER ::= { isdnMibConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
isdnMibCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the ISDN MIB."
|
|
MODULE -- this module
|
|
|
|
-- unconditionally mandatory groups
|
|
MANDATORY-GROUPS {
|
|
isdnMibSignalingGroup,
|
|
isdnMibBearerGroup
|
|
-- isdnMibNotificationsGroup
|
|
}
|
|
|
|
-- conditionally mandatory group
|
|
GROUP isdnMibBasicRateGroup
|
|
DESCRIPTION
|
|
"The isdnMibBasicRateGroup is mandatory for entities
|
|
supporting ISDN Basic Rate interfaces."
|
|
|
|
-- optional groups
|
|
GROUP isdnMibEndpointGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all systems
|
|
that attach to ISDN interfaces."
|
|
|
|
GROUP isdnMibDirectoryGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all systems
|
|
that attach to ISDN interfaces."
|
|
|
|
OBJECT isdnBasicRateIfType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is conformant to implement this object as read-only."
|
|
|
|
OBJECT isdnBasicRateLineTopology
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is conformant to implement this object as read-only."
|
|
|
|
OBJECT isdnBasicRateIfMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is conformant to implement this object as read-only."
|
|
|
|
OBJECT isdnBasicRateSignalMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is conformant to implement this object as read-only."
|
|
::= { isdnMibCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
isdnMibBasicRateGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnBasicRateIfType,
|
|
isdnBasicRateLineTopology,
|
|
isdnBasicRateIfMode,
|
|
isdnBasicRateSignalMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for ISDN Basic Rate
|
|
physical interface configuration and statistics."
|
|
::= { isdnMibGroups 1 }
|
|
|
|
isdnMibBearerGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnBearerChannelType,
|
|
isdnBearerOperStatus,
|
|
isdnBearerChannelNumber,
|
|
isdnBearerPeerAddress,
|
|
isdnBearerPeerSubAddress,
|
|
isdnBearerCallOrigin,
|
|
isdnBearerInfoType,
|
|
isdnBearerMultirate,
|
|
isdnBearerCallSetupTime,
|
|
isdnBearerCallConnectTime,
|
|
isdnBearerChargedUnits
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for ISDN Bearer channel
|
|
control and statistics."
|
|
::= { isdnMibGroups 2 }
|
|
|
|
isdnMibSignalingGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnSignalingGetIndex,
|
|
isdnSignalingIfIndex,
|
|
isdnSignalingProtocol,
|
|
isdnSignalingCallingAddress,
|
|
isdnSignalingSubAddress,
|
|
isdnSignalingBchannelCount,
|
|
isdnSignalingInfoTrapEnable,
|
|
isdnSignalingStatus,
|
|
isdnSigStatsInCalls,
|
|
isdnSigStatsInConnected,
|
|
isdnSigStatsOutCalls,
|
|
isdnSigStatsOutConnected,
|
|
isdnSigStatsChargedUnits,
|
|
isdnLapdPrimaryChannel,
|
|
isdnLapdOperStatus,
|
|
isdnLapdPeerSabme,
|
|
isdnLapdRecvdFrmr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for ISDN D channel
|
|
configuration and statistics."
|
|
::= { isdnMibGroups 3 }
|
|
|
|
isdnMibEndpointGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnEndpointGetIndex,
|
|
isdnEndpointIfIndex,
|
|
isdnEndpointIfType,
|
|
isdnEndpointTeiType,
|
|
isdnEndpointTeiValue,
|
|
isdnEndpointSpid,
|
|
isdnEndpointStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects describing Terminal Endpoints."
|
|
::= { isdnMibGroups 4 }
|
|
|
|
isdnMibDirectoryGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnDirectoryNumber,
|
|
isdnDirectorySigIndex,
|
|
isdnDirectoryStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects describing directory numbers."
|
|
::= { isdnMibGroups 5 }
|
|
|
|
-- isdnMibNotificationsGroup NOTIFICATION-GROUP
|
|
-- NOTIFICATIONS { isdnMibCallInformation }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The notifications which a ISDN MIB entity is
|
|
-- required to implement."
|
|
-- ::= { isdnMibGroups 6 }
|
|
|
|
|
|
END
|