Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
291 lines
8.7 KiB
Text
291 lines
8.7 KiB
Text
-- MIB created 10/11/99 20:28:35, by
|
|
-- SMIC (the next generation) version 1.6.29, November 22, 1994.
|
|
|
|
IBM-INTERFACE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- From file: "ibminterface.mi2"
|
|
-- Compile options "G A T M"
|
|
|
|
IMPORTS
|
|
Counter32, IpAddress
|
|
FROM SNMPv2-SMI-v1
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString
|
|
FROM SNMPv2-TC-v1
|
|
enterprises
|
|
FROM RFC1155-SMI
|
|
ifIndex
|
|
FROM RFC1213-MIB;
|
|
|
|
ibmIROCroutinginterface OBJECT IDENTIFIER ::= { enterprises ibm(2) ibmProd(6) ibmIROC(119) ibmIROCrouting(4) 17 }
|
|
-- MODULE-IDENTITY
|
|
-- LastUpdated
|
|
-- 9902171200Z
|
|
-- OrgName
|
|
-- IBM
|
|
-- ContactInfo
|
|
-- Randy Worzella
|
|
-- IBM Corporation
|
|
-- 800 Park Offices Drive
|
|
-- FBWA/664
|
|
-- P.O. Box 12195
|
|
-- Research Triangle Park, NC 27709, USA
|
|
-- Tel: 1 919 254 2202
|
|
-- E-mail: worzella@us.ibm.com
|
|
-- Descr
|
|
-- This MIB module contains enterprise specific definitions for
|
|
-- generic interface management.
|
|
|
|
ibminterfaceClearTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IbminterfaceClearEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table allowing interface counters to be cleared."
|
|
::= { ibmIROCroutinginterface 1 }
|
|
|
|
ibminterfaceClearEntry OBJECT-TYPE
|
|
SYNTAX IbminterfaceClearEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entry identifying a particular interface whose counters
|
|
are to be cleared."
|
|
INDEX { ifIndex }
|
|
::= { ibminterfaceClearTable 1 }
|
|
|
|
IbminterfaceClearEntry ::= SEQUENCE {
|
|
ibminterfaceClearInOctets INTEGER,
|
|
ibminterfaceClearInUcastPkts INTEGER,
|
|
ibminterfaceClearInMulticastPkts INTEGER,
|
|
ibminterfaceClearInErrors INTEGER,
|
|
ibminterfaceClearInAll INTEGER,
|
|
ibminterfaceClearOutOctets INTEGER,
|
|
ibminterfaceClearOutUcastPkts INTEGER,
|
|
ibminterfaceClearOutMulticastPkts INTEGER,
|
|
ibminterfaceClearOutErrors INTEGER,
|
|
ibminterfaceClearOutAll INTEGER,
|
|
ibminterfaceClearMaintTest INTEGER,
|
|
ibminterfaceClearDeviceSpecific INTEGER,
|
|
ibminterfaceClearAll INTEGER
|
|
}
|
|
|
|
ibminterfaceClearInOctets OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counter of bytes
|
|
received over this interface is reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 1 }
|
|
|
|
ibminterfaceClearInUcastPkts OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counter of unicast
|
|
packets received over this interface is reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 2 }
|
|
|
|
ibminterfaceClearInMulticastPkts OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counter of multicast
|
|
packets received over this interface is reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 3 }
|
|
|
|
ibminterfaceClearInErrors OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counters for all
|
|
types of input errors are reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 4 }
|
|
|
|
ibminterfaceClearInAll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counters for all
|
|
input counters (byte, packet, error) are reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 5 }
|
|
|
|
ibminterfaceClearOutOctets OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counter of bytes
|
|
sent over this interface is reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 6 }
|
|
|
|
ibminterfaceClearOutUcastPkts OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counter of unicast
|
|
packets sent over this interface is reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 7 }
|
|
|
|
ibminterfaceClearOutMulticastPkts OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counter of multicast
|
|
packets sent over this interface is reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 8 }
|
|
|
|
ibminterfaceClearOutErrors OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counters for all
|
|
types of output errors are reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 9 }
|
|
|
|
ibminterfaceClearOutAll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counters for all
|
|
output counters (byte, packet, error) are reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 10 }
|
|
|
|
ibminterfaceClearMaintTest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), the counters for
|
|
self test pass, self test fail and maintenance
|
|
fail are reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 11 }
|
|
|
|
ibminterfaceClearDeviceSpecific OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), all the device specific
|
|
counters are reset. For example, for an Ethernet
|
|
interface, all the counters provided in the
|
|
dot3StatsTable are reset.
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 12 }
|
|
|
|
ibminterfaceClearAll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
clear(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When SET to a value of clear(1), all the reset actions
|
|
performed by the MIB objects defined above are executed
|
|
at once.
|
|
|
|
This action has the same behavior as executing the
|
|
CLEAR command from the T5 console prompt (+).
|
|
|
|
When READ, this object always returns a value of noaction(0),
|
|
since this object is intended as a trigger, rather than
|
|
providing information."
|
|
::= { ibminterfaceClearEntry 13 }
|
|
|
|
|
|
END
|
|
|