Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
6868 lines
245 KiB
Text
6868 lines
245 KiB
Text
COMTROL-ES8510-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
internet FROM RFC1155-SMI
|
|
RowStatus, DisplayString, MacAddress, TimeInterval FROM SNMPv2-TC
|
|
PortList FROM Q-BRIDGE-MIB;
|
|
|
|
|
|
private OBJECT IDENTIFIER ::= { internet 4 }
|
|
enterprises OBJECT IDENTIFIER ::= { private 1 }
|
|
comtrol OBJECT IDENTIFIER ::= { enterprises 2882 }
|
|
products OBJECT IDENTIFIER ::= { comtrol 2 }
|
|
managedSwitch OBJECT IDENTIFIER ::= { products 1 }
|
|
es8510 OBJECT IDENTIFIER ::= { managedSwitch 1 }
|
|
|
|
contact MODULE-IDENTITY
|
|
LAST-UPDATED "201805140000Z"
|
|
ORGANIZATION "Comtrol Corporation"
|
|
CONTACT-INFO "Comtrol Corporation"
|
|
DESCRIPTION "Comtrol Corporation
|
|
100 Fifth Avenue NW
|
|
New Brighton, MN 55112
|
|
TEL: +1.763.957.6000
|
|
E-mail: ftpadmin@comtrol.com"
|
|
REVISION "201805140000Z"
|
|
DESCRIPTION "version 3.1a"
|
|
::= { comtrol 1 }
|
|
|
|
systemInfo OBJECT IDENTIFIER ::= { es8510 1 }
|
|
basicSetting OBJECT IDENTIFIER ::= { es8510 2 }
|
|
portConfiguration OBJECT IDENTIFIER ::= { es8510 3 }
|
|
networkRedundancy OBJECT IDENTIFIER ::= { es8510 4 }
|
|
vlan OBJECT IDENTIFIER ::= { es8510 5 }
|
|
trafficPrioritization OBJECT IDENTIFIER ::= { es8510 6 }
|
|
multicastFiltering OBJECT IDENTIFIER ::= { es8510 7 }
|
|
snmp OBJECT IDENTIFIER ::= { es8510 8 }
|
|
security OBJECT IDENTIFIER ::= { es8510 9 }
|
|
warning OBJECT IDENTIFIER ::= { es8510 10 }
|
|
monitorandDiag OBJECT IDENTIFIER ::= { es8510 11 }
|
|
save OBJECT IDENTIFIER ::= { es8510 12 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Textual Convention
|
|
-- -----------------------------------------------------------------------------
|
|
AlertType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- systemInfo
|
|
-- -----------------------------------------------------------------------------
|
|
systemName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this managed node.
|
|
By convention, this is the node's fully-qualified domain name."
|
|
::= { systemInfo 1 }
|
|
|
|
systemLocation OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The physical location of this node (e.g., telephone closet,
|
|
3rd floor')."
|
|
::= { systemInfo 2 }
|
|
|
|
systemContact OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The textual identification of the contact person for this
|
|
managed node, together with information on how to contact
|
|
this person."
|
|
::= { systemInfo 3 }
|
|
|
|
systemDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A textual description of the entity. This value should
|
|
include the full name and version identification of the
|
|
system's hardware type, software operating-system, and
|
|
networking software. It is mandatory that this only contain
|
|
printable ASCII characters."
|
|
::= { systemInfo 4 }
|
|
|
|
systemFwVer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Firmware version of the device."
|
|
::= { systemInfo 5 }
|
|
|
|
systemMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of this device. An Media Access Control
|
|
address (MAC address) is a unique identifier attached to
|
|
most network adapters (NICs). It is a number that acts
|
|
like a name for a particular network adapter"
|
|
::= { systemInfo 6 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- basicSetting
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
switchSetting OBJECT IDENTIFIER ::= { basicSetting 1 }
|
|
adminPassword OBJECT IDENTIFIER ::= { basicSetting 2 }
|
|
ipConfiguration OBJECT IDENTIFIER ::= { basicSetting 3 }
|
|
timeSetting OBJECT IDENTIFIER ::= { basicSetting 4 }
|
|
dhcpServer OBJECT IDENTIFIER ::= { basicSetting 5 }
|
|
backupAndRestore OBJECT IDENTIFIER ::= { basicSetting 6 }
|
|
tftpUpgrade OBJECT IDENTIFIER ::= { basicSetting 7 }
|
|
factoryDefault OBJECT IDENTIFIER ::= { basicSetting 8 }
|
|
systemReboot OBJECT IDENTIFIER ::= { basicSetting 9 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- switchSetting
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
switchSettingSystemName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..256))
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this managed node. By
|
|
convention, this is the node's fully-qualified domain name."
|
|
::= { switchSetting 1 }
|
|
|
|
switchSettingSystemLocation OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..256))
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The physical location of this node (e.g., telephone closet,
|
|
3rd floor')."
|
|
::= { switchSetting 2 }
|
|
|
|
switchSettingSystemContact OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The textual identification of the contact person for this
|
|
managed node, together with information on how to contact
|
|
this person."
|
|
::= { switchSetting 3 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- adminPassword
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
adminPasswordUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name(ID) of security manager."
|
|
::= { adminPassword 1 }
|
|
|
|
adminPasswordPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION "The password of security manager.
|
|
This object can't be read. it's write-only."
|
|
::= { adminPassword 2 }
|
|
|
|
--adminPasswordConfirm OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(0..8))
|
|
-- MAX-ACCESS write-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "To confirm the password modification.
|
|
-- This object can't be read. it's write-only."
|
|
-- ::= { adminPassword 3 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- ipConfiguration
|
|
-- -----------------------------------------------------------------------------
|
|
ipConfigurationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IPconfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
the IP of the device."
|
|
::= { ipConfiguration 1 }
|
|
|
|
ipConfigurationEntry OBJECT-TYPE
|
|
SYNTAX IPconfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information configuring static IP or DHCP configuration
|
|
of the device."
|
|
INDEX { ipConfigurationIndex }
|
|
::= { ipConfigurationTable 1 }
|
|
|
|
IPconfigurationEntry ::= SEQUENCE {
|
|
ipConfigurationIndex INTEGER,
|
|
ipConfigurationDHCPStatus INTEGER,
|
|
ipConfigurationAddress IpAddress,
|
|
ipConfigurationSubMask IpAddress,
|
|
ipConfigurationGateway IpAddress,
|
|
ipConfigurationDNS1 IpAddress,
|
|
ipConfigurationDNS2 IpAddress,
|
|
ipConfigurationStatus INTEGER
|
|
}
|
|
|
|
ipConfigurationIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object identifies IP configuration entries."
|
|
::= { ipConfigurationEntry 1 }
|
|
|
|
|
|
ipConfigurationDHCPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Parameter configuring DHCP client functionality of the
|
|
device. When enabled, device will be a DHCP client and
|
|
request for the IP configuration from DHCP server.
|
|
|
|
The Dynamic Host Configuration Protocol (DHCP) automates
|
|
the assignment of IP addresses, subnet masks, default
|
|
routers, and other IP parameters. The assignment usually
|
|
occurs when the DHCP-configured machine boots up or regains
|
|
connectivity to the network. The DHCP client sends out a
|
|
query requesting a response from a DHCP server on the
|
|
locally attached network. The query is typically initiated
|
|
immediately after booting up and before the client initiates
|
|
any IP based communication with other hosts. The DHCP server
|
|
then replies to the client with its assigned IP address,
|
|
subnet mask, DNS server and default gateway information.
|
|
|
|
Note: Other items in this table will not be modified, when
|
|
ipConfigurationDHCPStatus is enabled."
|
|
::= { ipConfigurationEntry 2 }
|
|
|
|
ipConfigurationAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of switch.
|
|
An IP address (Internet Protocol address) is a unique address
|
|
that devices use in order to identify and communicate with
|
|
each other on a computer network utilizing the Internet
|
|
Protocol standard (IP). Any participating network device can
|
|
has its own unique address."
|
|
::= { ipConfigurationEntry 3 }
|
|
|
|
ipConfigurationSubMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The subnet mask is a 32-bit number in the same format and
|
|
representation as IP addresses. The subnet mask determines
|
|
which bits in the IP address are interpreted as the network
|
|
number, which as the subnetwork number, and which as the
|
|
host number. Each IP address bit that corresponds to a 1
|
|
in the subnet mask is in the network/subnetwork part of
|
|
the address. This group of numbers is also called the
|
|
Network ID. Each IP address bit that corresponds to a 0 is
|
|
in the host part of the IP address."
|
|
::= { ipConfigurationEntry 4 }
|
|
|
|
ipConfigurationGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The default gateway IP address identifies the gateway (for
|
|
example, a router) that receives and forwards those packets
|
|
whose addresses are unknown to the local network. The agent
|
|
uses the default gateway address when sending alert packets
|
|
to the management workstation on a network other than the
|
|
local network."
|
|
::= { ipConfigurationEntry 5 }
|
|
|
|
ipConfigurationDNS1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Parameter configuring the first DNS server of the device.
|
|
|
|
The domain name system (DNS) stores and associates many
|
|
types of information with domain names. Most importantly,
|
|
it translates domain names (computer hostnames) to IP
|
|
addresses, which makes it possible to attach easy-to-remember
|
|
domain names to hard-to-remember IP
|
|
addresses (such as 100.50.10.100)."
|
|
::= { ipConfigurationEntry 6 }
|
|
|
|
ipConfigurationDNS2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Parameter configuring the second DNS server of the device."
|
|
::= { ipConfigurationEntry 7 }
|
|
|
|
ipConfigurationStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of the IP configuration entry. Only one
|
|
configuration entry is supported on the device. Set active(1)
|
|
to activate the parameters of the entry on the device."
|
|
::= { ipConfigurationEntry 8 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- timeSetting
|
|
-- -----------------------------------------------------------------------------
|
|
systemTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "current system time in format yyyy.mm.dd-hh:mm:ss"
|
|
::= { timeSetting 1 }
|
|
|
|
utcTimeZone OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gmtNegative1200EniwetokKwajalein(1),
|
|
gmtNegative1100MidwayIslandSamoa(2),
|
|
gmtNegative1000Hawaii(3),
|
|
gmtNegative0900Alaska(4),
|
|
gmtNegative0800PacificTimeUSandCanadaTijuana(5),
|
|
gmtNegative0700Arizona(6),
|
|
gmtNegative0700MountainTimeUSandCanada(7),
|
|
gmtNegative0600CentralAmerica(8),
|
|
gmtNegative0600CentralTimeUSandCanada(9),
|
|
gmtNegative0600MexicoCityTegucigalpa(10),
|
|
gmtNegative0600Saskatchewan(11),
|
|
gmtNegative0500BogotaLimaQuito(12),
|
|
gmtNegative0500EasternTimeUSandCanada(13),
|
|
gmtNegative0500IndianaEast(14),
|
|
gmtNegative0400AtlanticTimeCanada(15),
|
|
gmtNegative0400CaracasLaPaz(16),
|
|
gmtNegative0400Santiago(17),
|
|
gmtNegative0330Newfoundland(18),
|
|
gmtNegative0300Brasilia(19),
|
|
gmtNegative0300BuenosAiresGeorgetown(20),
|
|
gmtNegative0300Greenland(21),
|
|
gmtNegative0200Mid-Atlantic(22),
|
|
gmtNegative0100AzoresCapeVerdeIs(23),
|
|
gmtNegative0100CapeVerdeIs(24),
|
|
gmtCasablancaMonrovia(25),
|
|
gmtGreenwichMeanTimeDublinEdinburghLisbonLondon(26),
|
|
gmtPositive0100AmsterdamBerlinBernRomeStockholmVienna(27),
|
|
gmtPositive0100BelgradeBratislavaBudapestLjubljanaPrague(28),
|
|
gmtPositive0100BrusselsCopenhagenMadridParis(29),
|
|
gmtPositive0100SarajevoSkopjeSofijaWarsawZagreb(30),
|
|
gmtPositive0100WestCentralAfrica(31),
|
|
gmtPositive0200AthensIstanbulMinsk(32),
|
|
gmtPositive0200Bucharest(33),
|
|
gmtPositive0200Cairo(34),
|
|
gmtPositive0200HararePretoria(35),
|
|
gmtPositive0200HelsinkiRigaTallinn(36),
|
|
gmtPositive0200Jerusalem(37),
|
|
gmtPositive0300BaghdadKuwaitRiyadh(38),
|
|
gmtPositive0300KuwaitRiyadh(39),
|
|
gmtPositive0300MoscowStPetersburgVolgograd(40),
|
|
gmtPositive0300Mairobi(41),
|
|
gmtPositive0330Tehran(42),
|
|
gmtPositive0400AbuDhabiMuscat(43),
|
|
gmtPositive0400BakuTbilisi(44),
|
|
gmtPositive0430Kabul(45),
|
|
gmtPositive0500Ekaterinburg(46),
|
|
gmtPositive0500IslamabadKarachiTashkent(47),
|
|
gmtPositive0530BombayCalcuttaMadrasNewDelhi(48),
|
|
gmtPositive0545Kathmandu(49),
|
|
gmtPositive0600AlmatyNovosibirsk(50),
|
|
gmtPositive0600AstanaDhaka(51),
|
|
gmtPositive0600Colombo(52),
|
|
gmtPositive0630Rangoon(53),
|
|
gmtPositive0700BangkokHanoiJakarta(54),
|
|
gmtPositive0700Krasnoyarsk(55),
|
|
gmtPositive0800BeijingChongqingHongKongUrumqi(56),
|
|
gmtPositive0800IrkutskUlaanBataar(57),
|
|
gmtPositive0800KualaLumpurSingapore(58),
|
|
gmtPositive0800Perth(59),
|
|
gmtPositive0800Taipei(60),
|
|
gmtPositive0900OsakaSapporoTokyo(61),
|
|
gmtPositive0900Seoul(62),
|
|
gmtPositive0900Yakutsk(63),
|
|
gmtPositive0930Adelaide(64),
|
|
gmtPositive0930Darwin(65),
|
|
gmtPositive1000Brisbane(66),
|
|
gmtPositive1000CanberraMelbourneSydney(67),
|
|
gmtPositive1000GuamPortMoresby(68),
|
|
gmtPositive1000Hobart(69),
|
|
gmtPositive1000Vladivostok(70),
|
|
gmtPositive1100MagadanSolomonIsNewCaledonia(71),
|
|
gmtPositive1200AucklandWllington(72),
|
|
gmtPositive1200FijiKamchatkaMarshallIs(73),
|
|
gmtPositive1300Nukualofa(74)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "UTC Timezone list.
|
|
(GMT-12:00) Eniwetok, Kwajalein
|
|
(GMT-11:00) Midway Island, Samoa
|
|
(GMT-10:00) Hawaii
|
|
(GMT-09:00) Alaska
|
|
(GMT-08:00) Pacific Time (US & Canada), Tijuana
|
|
(GMT-07:00) Arizona
|
|
(GMT-07:00) Mountain Time (US & Canada)
|
|
(GMT-06:00) Central America
|
|
(GMT-06:00) Central Time (US & Canada)
|
|
(GMT-06:00) Mexico City
|
|
(GMT-06:00) Saskatchewan
|
|
(GMT-05:00) Bogota, Lima, Quito
|
|
(GMT-05:00) Eastern Time (US & Canada)
|
|
(GMT-05:00) Indiana (East)
|
|
(GMT-04:00) Atlantic Time (Canada)
|
|
(GMT-04:00) Caracas, La Paz
|
|
(GMT-04:00) Santiago
|
|
(GMT-03:00) NewFoundland
|
|
(GMT-03:00) Brasilia
|
|
(GMT-03:00) Buenos Aires, Georgetown
|
|
(GMT-03:00) Greenland
|
|
(GMT-02:00) Mid-Atlantic
|
|
(GMT-01:00) Azores
|
|
(GMT-01:00) Cape Verde Is.
|
|
(GMT) Casablanca, Monrovia
|
|
(GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London
|
|
(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
|
|
(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague
|
|
(GMT+01:00) Brussels, Copenhagen, Madrid, Paris
|
|
(GMT+01:00) Sarajevo, Skopje, Sofija, Vilnius, Warsaw, Zagreb
|
|
(GMT+01:00) West Central Africa
|
|
(GMT+02:00) Athens, Istanbul, Minsk
|
|
(GMT+02:00) Bucharest
|
|
(GMT+02:00) Cairo
|
|
(GMT+02:00) Harare, Pretoria
|
|
(GMT+02:00) Helsinki, Riga, Tallinn
|
|
(GMT+02:00) Jerusalem
|
|
(GMT+03:00) Baghdad
|
|
(GMT+03:00) Kuwait, Riyadh
|
|
(GMT+03:00) Moscow, St. Petersburg, Volgograd
|
|
(GMT+03:00) Nairobi
|
|
(GMT+03:30) Tehran
|
|
(GMT+04:00) Abu Dhabi, Muscat
|
|
(GMT+04:00) Baku, Tbilisi, Yerevan
|
|
(GMT+04:30) Kabul
|
|
(GMT+05:00) Ekaterinburg
|
|
(GMT+05:00) Islamabad, Karachi, Tashkent
|
|
(GMT+05:30) Calcutta, Chennai, Mumbai, New Delhi
|
|
(GMT+05:45) Kathmandu
|
|
(GMT+06:00) Almaty, Novosibirsk
|
|
(GMT+06:00) Astana, Dhaka
|
|
(GMT+06:00) Sri Jayawardenepura
|
|
(GMT+06:30) Rangoon
|
|
(GMT+07:00) Bangkok, Hanoi, Jakarta
|
|
(GMT+07:00) Krasnoyarsk
|
|
(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi
|
|
(GMT+08:00) Irkutsk, Ulaan Bataar
|
|
(GMT+08:00) Kuala Lumpur, Singapore
|
|
(GMT+08:00) Perth
|
|
(GMT+08:00) Taipei
|
|
(GMT+09:00) Osaka, Sapporo, Tokyo
|
|
(GMT+09:00) Seoul
|
|
(GMT+09:00) Yakutsk
|
|
(GMT+09:30) Adelaide
|
|
(GMT+09:30) Darwin
|
|
(GMT+10:00) Brisbane
|
|
(GMT+10:00) Canberra, Melbourne, Sydney
|
|
(GMT+10:00) Guam, Port Moresby
|
|
(GMT+10:00) Hobart
|
|
(GMT+10:00) Vladivostok
|
|
(GMT+11:00) Magadan, Solomon Is., New Caledonia
|
|
(GMT+12:00) Aukland, Wellington
|
|
(GMT+12:00) Fiji, Kamchatka, Marshall Is.
|
|
(GMT+13:00) Nuku'alofa"
|
|
::= { timeSetting 2 }
|
|
|
|
dayLightSavingTime OBJECT IDENTIFIER ::= { timeSetting 3 }
|
|
clockSource OBJECT IDENTIFIER ::= { timeSetting 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- dayLightSavingTime
|
|
-- -----------------------------------------------------------------------------
|
|
daylightSavingTimeStart OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..12))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The start-time of daylight saveing period,
|
|
in format mm.n.d/hh:mm
|
|
m is month, valid range 1-12 (1=January, 2=February, ..., 12=December).
|
|
n is week of the month (1 to 5, 5 means the last week).
|
|
d is weekday, valid range 0-6 (0=Sunday, 1=Monday, ..., 6=Saturday).
|
|
hh:mm is time."
|
|
::= { dayLightSavingTime 1 }
|
|
|
|
daylightSavingTimeEnd OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..12))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The end-time of daylight saveing period,
|
|
in format mm.n.d/hh:mm
|
|
m is month, valid range 1-12 (1=January, 2=February, ..., 12=December).
|
|
n is week of the month (1 to 5, 5 means the last week).
|
|
d is weekday, valid range 0-6 (0=Sunday, 1=Monday, ..., 6=Saturday).
|
|
hh:mm is time."
|
|
::= { dayLightSavingTime 2 }
|
|
|
|
daylightSavingOffset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Offset(Usually is 60 mins).
|
|
When Enable and current time at Daylight Saving Period,
|
|
the current time of the switch will be offseted by
|
|
Daylight Saving Offset."
|
|
::= { dayLightSavingTime 3 }
|
|
|
|
daylightSavingTimeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "(1)Enable Daylight Saving Time.
|
|
(2)Disable Daylight Saving Time.
|
|
Daylight Saving Time:
|
|
Use this OID to Enable/Disable Daylight Saving Time."
|
|
::= { dayLightSavingTime 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- clock source configuration
|
|
-- -----------------------------------------------------------------------------
|
|
clockSourceSelection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
ntp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { clockSource 1 }
|
|
|
|
clockSourceManual OBJECT IDENTIFIER ::= { clockSource 2 }
|
|
clockSourceNtp OBJECT IDENTIFIER ::= { clockSource 3 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- manual config
|
|
-- -----------------------------------------------------------------------------
|
|
clockSourceManualSetting OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..19))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "set system time, in format yyyy.mm.dd-hh:mm:ss"
|
|
::= { clockSourceManual 1 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- ntp
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
--ntpClientStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enabled(1),
|
|
-- disabled(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "(1)Enable SNTP clinet.
|
|
-- (2)Disable SNTP clinet.
|
|
-- SNTP is simple network time protocol.
|
|
-- Use this OID to Enable/Disable SNTP client."
|
|
-- ::= { ntp 1 }
|
|
|
|
ntpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NtpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about NTP
|
|
servers.
|
|
|
|
NTP (Network Time Protocol) synchronizes timekeeping among a
|
|
set of distributed time servers and clients. This synchronization
|
|
allows events to be correlated when system logs are created and
|
|
other time-specific events occur.
|
|
|
|
An NTP server is configured to synchronize NTP clients. Servers
|
|
can be configured to synchronize any client or only specific
|
|
clients. NTP servers, however, will accept no synchronization
|
|
information from their clients and therefore will not let
|
|
clients update or affect the server's time settings.
|
|
|
|
This switch acts as an NTP client, which tries to let its clock
|
|
be set and synchronized by an external NTP timeserver. It can be
|
|
configured to use multiple servers (upto 4 servers)."
|
|
::= { clockSourceNtp 1 }
|
|
|
|
ntpEntry OBJECT-TYPE
|
|
SYNTAX NtpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information configuring IP addresses of NTP servers."
|
|
INDEX { ntpIndex }
|
|
::= { ntpTable 1 }
|
|
|
|
NtpEntry ::= SEQUENCE {
|
|
ntpIndex Integer32,
|
|
ntpServerIP IpAddress
|
|
}
|
|
|
|
ntpIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the entry."
|
|
::= { ntpEntry 1 }
|
|
|
|
ntpServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of an NTP Server. Set 0.0.0.0 or
|
|
255.255.255.255 to remove this config."
|
|
::= { ntpEntry 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpServer
|
|
-- -----------------------------------------------------------------------------
|
|
dhcpServerEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable dhcp server function."
|
|
::= { dhcpServer 1 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpServerPoolTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dhcpServerPoolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpServerPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
DHCP server of the switch."
|
|
::= { dhcpServer 2 }
|
|
|
|
dhcpServerPoolEntry OBJECT-TYPE
|
|
SYNTAX DhcpServerPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing DHCP server information
|
|
of the switch. "
|
|
INDEX { dhcpServerPoolIndex }
|
|
::= { dhcpServerPoolTable 1 }
|
|
|
|
DhcpServerPoolEntry ::= SEQUENCE {
|
|
dhcpServerPoolIndex Integer32,
|
|
dhcpServerPoolName DisplayString,
|
|
dhcpServerPoolNetwork IpAddress,
|
|
dhcpServerPoolSubMask IpAddress,
|
|
dhcpServerPoolGateway IpAddress,
|
|
dhcpServerPoolLeaseTime Integer32,
|
|
dhcpServerPoolStatus RowStatus
|
|
}
|
|
|
|
dhcpServerPoolIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of the Address Pool."
|
|
::= { dhcpServerPoolEntry 1 }
|
|
|
|
dhcpServerPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address pool name."
|
|
::= { dhcpServerPoolEntry 2 }
|
|
|
|
dhcpServerPoolNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Subnet of the IP Address Pool."
|
|
::= { dhcpServerPoolEntry 3 }
|
|
|
|
dhcpServerPoolSubMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The subnet mask of the IP Address Pool."
|
|
::= { dhcpServerPoolEntry 4 }
|
|
|
|
dhcpServerPoolGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The gateway address of the IP Address Pool."
|
|
::= { dhcpServerPoolEntry 5 }
|
|
|
|
dhcpServerPoolLeaseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The lease time(in second) of the Address Pool."
|
|
::= { dhcpServerPoolEntry 6 }
|
|
|
|
dhcpServerPoolStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of the Address Pool."
|
|
::= { dhcpServerPoolEntry 7 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpExcludedTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dhcpExcludedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpExcludedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
DHCP server of the switch."
|
|
::= { dhcpServer 3 }
|
|
|
|
dhcpExcludedEntry OBJECT-TYPE
|
|
SYNTAX DhcpExcludedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing DHCP server information
|
|
of the switch. "
|
|
INDEX { dhcpServerPoolIndex , dhcpExcludedIndex}
|
|
::= { dhcpExcludedTable 1 }
|
|
|
|
DhcpExcludedEntry ::= SEQUENCE {
|
|
dhcpExcludedIndex Integer32,
|
|
dhcpExcludedIp IpAddress,
|
|
dhcpExcludedStatus RowStatus
|
|
}
|
|
|
|
dhcpExcludedIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of the Excluded Table."
|
|
::= { dhcpExcludedEntry 1 }
|
|
|
|
dhcpExcludedIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address ."
|
|
::= { dhcpExcludedEntry 2 }
|
|
|
|
dhcpExcludedStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of a address pool."
|
|
::= { dhcpExcludedEntry 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpManualBindingTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dhcpManualBindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpManualBindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
DHCP server of the switch."
|
|
::= { dhcpServer 4 }
|
|
|
|
dhcpManualBindingEntry OBJECT-TYPE
|
|
SYNTAX DhcpManualBindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing DHCP server information
|
|
of the switch. "
|
|
INDEX { dhcpServerPoolIndex,dhcpManualBindingIndex }
|
|
::= { dhcpManualBindingTable 1 }
|
|
|
|
DhcpManualBindingEntry ::= SEQUENCE {
|
|
dhcpManualBindingIndex Integer32,
|
|
dhcpManualBindingIp IpAddress,
|
|
dhcpManualBindingMac MacAddress,
|
|
dhcpManualBindingStatus RowStatus
|
|
}
|
|
|
|
dhcpManualBindingIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of the Static Binding Table."
|
|
::= { dhcpManualBindingEntry 1 }
|
|
|
|
dhcpManualBindingIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address."
|
|
::= { dhcpManualBindingEntry 2 }
|
|
|
|
dhcpManualBindingMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The MAC address."
|
|
::= { dhcpManualBindingEntry 3 }
|
|
|
|
dhcpManualBindingStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of the binding."
|
|
::= { dhcpManualBindingEntry 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- dhcpStaticPortTable
|
|
-- -----------------------------------------------------------------------------
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5
|
|
dhcpStaticPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpStaticPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of descriptive information and configuration about
|
|
DHCP server of the switch."
|
|
::= { dhcpServer 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1
|
|
dhcpStaticPortEntry OBJECT-TYPE
|
|
SYNTAX DhcpStaticPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing DHCP server information
|
|
of the switch. "
|
|
INDEX { dhcpServerPoolIndex, dhcpStaticPortIndex }
|
|
::= { dhcpStaticPortTable 1 }
|
|
|
|
|
|
DhcpStaticPortEntry ::=
|
|
SEQUENCE {
|
|
dhcpStaticPortIndex
|
|
Integer32,
|
|
dhcpStaticPortNumber
|
|
INTEGER,
|
|
dhcpStaticPortIp
|
|
IpAddress,
|
|
dhcpStaticPortStatus
|
|
RowStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1.1
|
|
dhcpStaticPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the StaticPort Table."
|
|
::= { dhcpStaticPortEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1.2
|
|
dhcpStaticPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number ."
|
|
::= { dhcpStaticPortEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1.3
|
|
dhcpStaticPortIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address ."
|
|
::= { dhcpStaticPortEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1.4
|
|
dhcpStaticPortStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of a static port entry."
|
|
::= { dhcpStaticPortEntry 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpOption82Table
|
|
-- -----------------------------------------------------------------------------
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6
|
|
dhcpOption82Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpOption82Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP server option82 table."
|
|
::= { dhcpServer 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1
|
|
dhcpOption82Entry OBJECT-TYPE
|
|
SYNTAX DhcpOption82Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP server option82 entry."
|
|
INDEX { dhcpServerPoolIndex, dhcpOption82Index }
|
|
::= { dhcpOption82Table 1 }
|
|
|
|
|
|
DhcpOption82Entry ::=
|
|
SEQUENCE {
|
|
dhcpOption82Index
|
|
Integer32,
|
|
dhcpOption82CircuitIdType
|
|
INTEGER,
|
|
dhcpOption82CircuitIdValue
|
|
OCTET STRING,
|
|
dhcpOption82RemoteIdType
|
|
INTEGER,
|
|
dhcpOption82RemoteIdValue
|
|
OCTET STRING,
|
|
dhcpOption82Ip
|
|
IpAddress,
|
|
dhcpOption82Status
|
|
RowStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.1
|
|
dhcpOption82Index OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the table."
|
|
::= { dhcpOption82Entry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.2
|
|
dhcpOption82CircuitIdType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
any(0),
|
|
string(2),
|
|
hexadecimal(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Circuit-ID type of this option."
|
|
::= { dhcpOption82Entry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.3
|
|
dhcpOption82CircuitIdValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Circuit-ID value of this option."
|
|
::= { dhcpOption82Entry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.4
|
|
dhcpOption82RemoteIdType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
any(0),
|
|
string(2),
|
|
hexadecimal(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Remote-ID type of this option."
|
|
::= { dhcpOption82Entry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.5
|
|
dhcpOption82RemoteIdValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Remote-ID value of this option."
|
|
::= { dhcpOption82Entry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.6
|
|
dhcpOption82Ip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address bind to this option."
|
|
::= { dhcpOption82Entry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.7
|
|
dhcpOption82Status OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"he status of a static port entry."
|
|
::= { dhcpOption82Entry 7 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpServerLeasedTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dhcpServerLeasedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpServerLeasedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
DHCP server of the switch."
|
|
::= { dhcpServer 7 }
|
|
|
|
dhcpServerLeasedEntry OBJECT-TYPE
|
|
SYNTAX DhcpServerLeasedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing DHCP server information
|
|
of the switch. "
|
|
INDEX { dhcpServerPoolIndex, dhcpServerLeasedIndex }
|
|
::= { dhcpServerLeasedTable 1 }
|
|
|
|
DhcpServerLeasedEntry ::= SEQUENCE {
|
|
dhcpServerLeasedIndex Integer32,
|
|
dhcpServerLeasedIp IpAddress,
|
|
dhcpServerLeasedMac MacAddress,
|
|
dhcpServerLeasedType INTEGER,
|
|
dhcpServerLeasedTime Integer32
|
|
}
|
|
|
|
dhcpServerLeasedIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of the Leased Table."
|
|
::= { dhcpServerLeasedEntry 1 }
|
|
|
|
dhcpServerLeasedIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The client IP address."
|
|
::= { dhcpServerLeasedEntry 2 }
|
|
|
|
dhcpServerLeasedMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The client MAC address."
|
|
::= { dhcpServerLeasedEntry 3 }
|
|
|
|
dhcpServerLeasedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
dynamic(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dhcpServerLeasedEntry 4 }
|
|
|
|
dhcpServerLeasedTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The lease time of the client."
|
|
::= { dhcpServerLeasedEntry 5 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpRelayAgent
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dhcpRelayAgentEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable dhcp relay agent function."
|
|
::= { dhcpServer 8 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpRelayAgentPolicy
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dhcpRelayAgentPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
keep(1),
|
|
drop(2),
|
|
replace(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Keep(1): Keeps the original option 82 field and forwards to server
|
|
drop(2): Drops the option 82 field and do not add any option 82 field
|
|
replace(3): Replaces the existing option 82 field and adds new option
|
|
82 field. (This is the default setting)"
|
|
::= { dhcpServer 9 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpRelayAgentCircuitIdTable
|
|
-- -----------------------------------------------------------------------------
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10
|
|
dhcpRelayAgentCircuitIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpRelayAgentCircuitIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { dhcpServer 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1
|
|
dhcpRelayAgentCircuitIdEntry OBJECT-TYPE
|
|
SYNTAX DhcpRelayAgentCircuitIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
INDEX { dhcpRelayAgentCircuitIdPortNum }
|
|
::= { dhcpRelayAgentCircuitIdTable 1 }
|
|
|
|
|
|
DhcpRelayAgentCircuitIdEntry ::=
|
|
SEQUENCE {
|
|
dhcpRelayAgentCircuitIdPortNum
|
|
Integer32,
|
|
dhcpRelayAgentCircuitIdType
|
|
Integer32,
|
|
dhcpRelayAgentCircuitIdValue
|
|
OCTET STRING,
|
|
dhcpRelayAgentCircuitIdDisplay
|
|
OCTET STRING
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1.1
|
|
dhcpRelayAgentCircuitIdPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { dhcpRelayAgentCircuitIdEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1.2
|
|
dhcpRelayAgentCircuitIdType OBJECT-TYPE
|
|
SYNTAX Integer32 {
|
|
default(0),
|
|
string(2),
|
|
hexadecimal(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Circuit-ID type of the Option82 added by Relay Agent."
|
|
::= { dhcpRelayAgentCircuitIdEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1.3
|
|
dhcpRelayAgentCircuitIdValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Circuit-ID value of the Option82 added by Relay Agent, the format
|
|
can be String or Hexadecimal value."
|
|
::= { dhcpRelayAgentCircuitIdEntry 3 }
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1.4
|
|
dhcpRelayAgentCircuitIdDisplay OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display the Circuit-ID value by Hexadecimal format"
|
|
::= { dhcpRelayAgentCircuitIdEntry 4 }
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.11
|
|
dhcpRelayAgentRemoteIdType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
string(2),
|
|
hexadecimal(3),
|
|
ip(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote-ID type of the Option82 added by Relay Agent."
|
|
::= { dhcpServer 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.12
|
|
dhcpRelayAgentRemoteIdValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote-ID value of the Option82 added by Relay Agent, the format
|
|
can be String or Hexadecimal value."
|
|
::= { dhcpServer 12 }
|
|
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.13
|
|
dhcpRelayAgentRemoteIdDisplay OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote-ID value of the Option82 added by Relay Agent."
|
|
::= { dhcpServer 13 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
--dhcpHelperAddrTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dhcpHelperAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpHelperAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
DHCP relay helper address of the switch."
|
|
::= { dhcpServer 14 }
|
|
|
|
dhcpHelperAddressEntry OBJECT-TYPE
|
|
SYNTAX DhcpHelperAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing DHCP relay information
|
|
of the switch. "
|
|
INDEX { dhcpHelperAddress }
|
|
::= { dhcpHelperAddressTable 1 }
|
|
|
|
DhcpHelperAddressEntry ::= SEQUENCE {
|
|
dhcpHelperAddress IpAddress,
|
|
|
|
}
|
|
|
|
dhcpHelperAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address ."
|
|
::= { dhcpHelperAddressEntry 1 }
|
|
|
|
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- backupAndRestore
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
backupServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of a TFTP server to which a
|
|
startup configuration can be uploaded."
|
|
DEFVAL { '00000000'H }
|
|
::= { backupAndRestore 1 }
|
|
|
|
backupAgentBoardFwFileName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The filename to backup to."
|
|
DEFVAL { "Quagga.conf" }
|
|
::= { backupAndRestore 2 }
|
|
|
|
backupStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notActive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object to active(1) trigger the TFTP
|
|
upload action.
|
|
Setting this object to notActive(2) has no effect.
|
|
The system always returns the value notActive(2)
|
|
when this object is read."
|
|
::= { backupAndRestore 3 }
|
|
|
|
restoreServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of a TFTP server from which the
|
|
startup configuration can be downloaded."
|
|
DEFVAL { '00000000'H }
|
|
::= { backupAndRestore 4 }
|
|
|
|
restoreAgentBoardFwFileName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The file name to restore from."
|
|
DEFVAL { "Quagga.conf" }
|
|
::= { backupAndRestore 5 }
|
|
|
|
restoreStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notActive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object to active(1) trigger the TFTP
|
|
download action.
|
|
Setting this object to notActive(2) has no effect.
|
|
The system always returns the value notActive(2)
|
|
when this object is read."
|
|
::= { backupAndRestore 6 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- tftpUpgrade
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
tftpDownloadServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of a TFTP server where a firmware image can
|
|
be downloaded."
|
|
DEFVAL { '00000000'H }
|
|
::= { tftpUpgrade 1 }
|
|
|
|
tftpDownloadAgentBoardFwFileName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The file name of the firmware to be downloaded."
|
|
DEFVAL { "firmware.bin" }
|
|
::= { tftpUpgrade 2 }
|
|
|
|
tftpDownloadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notActive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object to active(1) trigger the TFTP
|
|
download action.
|
|
Setting this object to notActive(2) has no effect.
|
|
The system always returns the value notActive(2)
|
|
when this object is read."
|
|
::= { tftpUpgrade 3 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- factoryDefault
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
factoryDefaultActive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notActive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set to active(1) to reload factory default configuration.
|
|
Reloading factory default will overwrite your current
|
|
configuration file with factocy default configuration while
|
|
current IP configuration is reserved.
|
|
Please reboot the device to make factory default configuration
|
|
take effect.
|
|
Set notActive(2) has no effect. The system always returns the
|
|
value notActive(2) when this object is read."
|
|
::= { factoryDefault 1 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- systemReboot
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
systemRebootActive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notActive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set active(1) to restart the device.
|
|
Set to notActive(2) has no effect. The device always returns
|
|
the value notActive(2) when this object is read."
|
|
DEFVAL { notActive }
|
|
::= { systemReboot 1 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portConfiguration
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
portControl OBJECT IDENTIFIER ::= { portConfiguration 1 }
|
|
portStatus OBJECT IDENTIFIER ::= { portConfiguration 2 }
|
|
rateLimiting OBJECT IDENTIFIER ::= { portConfiguration 3 }
|
|
portTrunk OBJECT IDENTIFIER ::= { portConfiguration 4 }
|
|
|
|
portCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of information and configuration for each ports."
|
|
::= { portControl 1 }
|
|
|
|
portCtrlEntry OBJECT-TYPE
|
|
SYNTAX PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing information and configuration for a port."
|
|
INDEX { portCtrlIndex }
|
|
::= { portCtrlTable 1 }
|
|
|
|
PortCtrlEntry ::= SEQUENCE {
|
|
portCtrlIndex INTEGER,
|
|
portCtrlPortName DisplayString,
|
|
portCtrlPortStatus INTEGER,
|
|
portCtrlSpeedAndDuplex INTEGER,
|
|
portCtrlFlowControl INTEGER,
|
|
portCtrlPortDescription DisplayString
|
|
}
|
|
|
|
portCtrlIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of the port control entry."
|
|
::= { portCtrlEntry 1 }
|
|
|
|
portCtrlPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..7))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The name of port."
|
|
::= { portCtrlEntry 2 }
|
|
|
|
portCtrlPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable or disable of this port."
|
|
::= { portCtrlEntry 3 }
|
|
|
|
portCtrlSpeedAndDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoNegotiation(1),
|
|
tenMbpsHalfDuplex(2),
|
|
tenMbpsFullDuplex(3),
|
|
hundredMbpsHalfDuplex(4),
|
|
hundredMbpsFullDuplex(5),
|
|
thousandMbpsFullDuplex(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Speed and duplex configuraion.
|
|
|
|
Different speed and duplex modes are available. There are speeds:
|
|
1000 megabits per second (Gigabit Ethernet), 100 megabits per
|
|
second (Fast Ethernet), and 10 megabits per second (Legacy
|
|
Ethernet).
|
|
|
|
Full-duplex allows packets to be transmitted in both directions
|
|
at the same time, while half-duplex allows a device to either
|
|
transmit or receive, but not both at the same time. Full-duplex
|
|
may have double bandwidth than half-duplex.
|
|
|
|
You can configure manually from the possible options, listed from
|
|
best to worst:
|
|
1Gb full-duplex(6)
|
|
100Mb full-duplex(5)
|
|
100Mb half-duplex(4)
|
|
10Mb full-duplex(3)
|
|
10Mb half-duplex(2)
|
|
|
|
Set to autoNegotiation(1) to allow the two interfaces on the link
|
|
to exchange the capabilities and characteristics of the each side,
|
|
and select the best operating mode automatically when a cable is
|
|
plugged in."
|
|
::= { portCtrlEntry 4 }
|
|
|
|
portCtrlFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
symmetric(2)
|
|
-- asymmetric(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flow control configuration.
|
|
|
|
Flow control is used to throttle the throughput rate of an
|
|
end station to avoid dropping packets during network
|
|
congestion. If flow control mode is not set and if there is
|
|
no packet buffer space available, the incoming packets are
|
|
discarded.
|
|
|
|
Symmetric Flow Control stops and restarts packet transmission
|
|
by transmitting and receiving pause frames. When a port's
|
|
free buffer space is almost empty, the device send out a Pause
|
|
frame to stop the remove node from sending more frames into
|
|
the switch. When congestion on the port is relieved, the device
|
|
send out a Pause frame with pause time equal to zero, making
|
|
the remove node resume transmission."
|
|
DEFVAL { disable }
|
|
::= { portCtrlEntry 5 }
|
|
|
|
portCtrlPortDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..138))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The description of port."
|
|
::= { portCtrlEntry 6 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portStatusTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
portStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and statistics information about
|
|
each ports."
|
|
::= { portStatus 1 }
|
|
|
|
portStatusEntry OBJECT-TYPE
|
|
SYNTAX PortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing statistics information of a port."
|
|
INDEX { portStatusIndex }
|
|
::= { portStatusTable 1 }
|
|
|
|
PortStatusEntry ::= SEQUENCE {
|
|
portStatusIndex Integer32,
|
|
portStatusType INTEGER,
|
|
portStatusLink INTEGER,
|
|
portStatusState INTEGER,
|
|
portStatusSpeedDuplex INTEGER,
|
|
portStatusFlowCtrl INTEGER,
|
|
sfpVender DisplayString,
|
|
sfpWavelength Integer32,
|
|
sfpDistance Integer32
|
|
}
|
|
|
|
portStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index of port statistic table."
|
|
::= { portStatusEntry 1 }
|
|
|
|
portStatusType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hundredBaseTX(1),
|
|
thousandBaseT(2),
|
|
hundredBaseFX(3),
|
|
thousandBaseSX(4),
|
|
thousandBaseLX(5),
|
|
other(6),
|
|
notPresent(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the type of the port."
|
|
::= { portStatusEntry 2 }
|
|
|
|
portStatusLink OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the link state of the port."
|
|
::= { portStatusEntry 3 }
|
|
|
|
portStatusState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the state of the port."
|
|
::= { portStatusEntry 4 }
|
|
|
|
portStatusSpeedDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoNegotiation(1),
|
|
tenMbpsHalfDuplex(2),
|
|
tenMbpsFullDuplex(3),
|
|
hundredMbpsHalfDuplex(4),
|
|
hundredMbpsFullDuplex(5),
|
|
thousandMbpsFullDuplex(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the speed and duplex mode of the port."
|
|
::= { portStatusEntry 5 }
|
|
|
|
portStatusFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
symmetric(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the flow control status of the port."
|
|
::= { portStatusEntry 6 }
|
|
|
|
sfpVender OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The vender name of the Small Form Pluggable (SFP) optical
|
|
transceiver module."
|
|
::= { portStatusEntry 7 }
|
|
|
|
sfpWavelength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The wave length in nanometers (nm) of the Small Form
|
|
Pluggable (SFP) optical transceiver module."
|
|
::= { portStatusEntry 8 }
|
|
|
|
sfpDistance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum transimission distance in meters of the Small
|
|
Form Pluggable (SFP) optical transceiver module."
|
|
::= { portStatusEntry 9 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portSfpTable
|
|
-- -----------------------------------------------------------------------------
|
|
portSfpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortSfpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information about SFP"
|
|
::= { portStatus 2 }
|
|
|
|
portSfpEntry OBJECT-TYPE
|
|
SYNTAX PortSfpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing SFP information of a port."
|
|
INDEX { portSfpIndex }
|
|
::= { portSfpTable 1 }
|
|
|
|
PortSfpEntry ::= SEQUENCE {
|
|
portSfpIndex Integer32,
|
|
portSfpEject INTEGER,
|
|
portSfpScan INTEGER,
|
|
portSfpDdmStatus INTEGER,
|
|
portSfpDdmTempatureCurrent DisplayString,
|
|
portSfpDdmTempatureRange DisplayString,
|
|
portSfpDdmTxPowerCurrent DisplayString,
|
|
portSfpDdmTxPowerRange DisplayString,
|
|
portSfpDdmRxPowerCurrent DisplayString,
|
|
portSfpDdmRxPowerRange DisplayString
|
|
}
|
|
|
|
portSfpIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index of port SFP table."
|
|
::= { portSfpEntry 1 }
|
|
|
|
portSfpEject OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Eject SFP"
|
|
::= { portSfpEntry 2 }
|
|
|
|
portSfpScan OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Scan SFP"
|
|
::= { portSfpEntry 3 }
|
|
|
|
portSfpDdmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "(1)Enable SFP digital diagnostic and monitoring.
|
|
(2)Disable SFP digital diagnostic and monitoring."
|
|
::= { portSfpEntry 4 }
|
|
|
|
portSfpDdmTempatureCurrent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current SFP Tempature of port."
|
|
::= { portSfpEntry 5 }
|
|
|
|
portSfpDdmTempatureRange OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The range of SFP Tempature of port."
|
|
::= { portSfpEntry 6 }
|
|
|
|
portSfpDdmTxPowerCurrent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current SFP Transmitted Power of port."
|
|
::= { portSfpEntry 7 }
|
|
|
|
portSfpDdmTxPowerRange OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The range of SFP Transmitted Power of port."
|
|
::= { portSfpEntry 8 }
|
|
|
|
portSfpDdmRxPowerCurrent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current SFP Receiveed Power of port."
|
|
::= { portSfpEntry 9 }
|
|
|
|
portSfpDdmRxPowerRange OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The range of SFP Receiveed Power of port."
|
|
::= { portSfpEntry 10 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- rateLimiting
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
rateLimitingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RateLimitingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
port rate limiting. You can set up bandwidth rate and packet
|
|
limitation type for each ports.
|
|
|
|
Rate limiting is used to control the rate of traffic sent or
|
|
received on a network interface. For ingress rate limiting,
|
|
traffic that is less than or equal to the specified rate is
|
|
received, whereas traffic that exceeds the rate is dropped.
|
|
For egress rate limiting, traffic that is less than or equal
|
|
to the specified rate is sent, whereas traffic that exceeds
|
|
the rate is dropped."
|
|
::= { rateLimiting 1 }
|
|
|
|
rateLimitingEntry OBJECT-TYPE
|
|
SYNTAX RateLimitingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing information and configuration about
|
|
port rate limiting."
|
|
INDEX { rateLimitingPortNum }
|
|
::= { rateLimitingTable 1 }
|
|
|
|
RateLimitingEntry ::= SEQUENCE {
|
|
rateLimitingPortNum Integer32,
|
|
rateLimitingIngressLimitType INTEGER,
|
|
rateLimitingIngressRate Integer32,
|
|
rateLimitingEgressRate Integer32
|
|
}
|
|
|
|
rateLimitingPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port number."
|
|
::= { rateLimitingEntry 1 }
|
|
|
|
rateLimitingIngressLimitType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(1),
|
|
broadcastMulticastFloodedUnicast(2),
|
|
broadcastMulticast(3),
|
|
broadcastOnly(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of ingress packets to be filtered."
|
|
::= { rateLimitingEntry 2 }
|
|
|
|
rateLimitingIngressRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ingress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps
|
|
and zero means no limit."
|
|
::= { rateLimitingEntry 3 }
|
|
|
|
rateLimitingEgressRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Egress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps
|
|
and zero means no limit. Egress rate limiting has effect on
|
|
all types of packets, including unicast, multicast and
|
|
broadcast packets."
|
|
::= { rateLimitingEntry 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portTrunk
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
aggregatorSetting OBJECT IDENTIFIER ::= { portTrunk 1 }
|
|
aggregatorStatus OBJECT IDENTIFIER ::= { portTrunk 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portTrunkAggregatorSettingTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
portTrunkAggregatorSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortTrunkAggregatorSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
of each trunk group in this system.
|
|
|
|
Link aggregation, or IEEE 802.3ad, is a method of combining
|
|
physical network links into a single logical link for
|
|
increased bandwidth. With Link aggregation we are able to
|
|
increase the capacity and availability of the communications
|
|
channel between devices (both switches and end stations)
|
|
using existing Fast Ethernet and Gigabit Ethernet technology.
|
|
Two or more Gigabit Ethernet connections are combined in
|
|
order to increase the bandwidth capability and to create
|
|
resilient and redundant links. A set of multiple parallel
|
|
physical links between two devices is grouped together to
|
|
form a single logical link.
|
|
|
|
Link Aggregation also provides load balancing where the
|
|
processing and communications activity is distributed across
|
|
the links in a trunk so that no single link is overwhelmed."
|
|
::= { aggregatorSetting 1 }
|
|
|
|
portTrunkAggregatorSettingEntry OBJECT-TYPE
|
|
SYNTAX PortTrunkAggregatorSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information controlling aggregator configuration."
|
|
INDEX { portTrunkPortIndex }
|
|
::= { portTrunkAggregatorSettingTable 1 }
|
|
|
|
|
|
PortTrunkAggregatorSettingEntry ::= SEQUENCE {
|
|
portTrunkPortIndex INTEGER,
|
|
portTrunkAggregatorGroupId INTEGER,
|
|
portTrunkAggregatorType INTEGER
|
|
}
|
|
|
|
portTrunkPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port number."
|
|
::= { portTrunkAggregatorSettingEntry 1 }
|
|
|
|
portTrunkAggregatorGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
trunkGroup1(1),
|
|
trunkGroup2(2),
|
|
trunkGroup3(3),
|
|
trunkGroup4(4),
|
|
trunkGroup5(5),
|
|
none(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Trunk group Id. Upto 8 ports can be aggregated into
|
|
a group and 5 groups can be configured in the device."
|
|
::= { portTrunkAggregatorSettingEntry 2 }
|
|
|
|
portTrunkAggregatorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
lacp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Aggregator type. You can assign the aggregator staticly
|
|
by setting to static(1), or setting to lacp(2) to enable the
|
|
LACP protocol.
|
|
|
|
The Link Aggregation Control Protocol (LACP) is required for
|
|
dynamically exchanging configuration information between the
|
|
peer devices in order to automatically configure and maintain
|
|
link aggregation groups. The protocol is able to automatically
|
|
detect the presence and capabilities of other aggregation
|
|
capable devices, i.e. with LACP it is possible to specify which
|
|
links in a system can be aggregated.
|
|
|
|
This column has no effect if Group Id is set to none."
|
|
::= { portTrunkAggregatorSettingEntry 3 }
|
|
|
|
|
|
portTrunkAggregatorSettingApply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1), -- state, read-write
|
|
notactive(2) -- state, read-only
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "set active(1) to apply the configuration"
|
|
::= { aggregatorSetting 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portTrunkAggregatorStatusTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
portTrunkAggregatorStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortTrunkAggregatorStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information about trunk groups in
|
|
the device."
|
|
::= { aggregatorStatus 1 }
|
|
|
|
portTrunkAggregatorStatusEntry OBJECT-TYPE
|
|
SYNTAX PortTrunkAggregatorStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing information about current configuration
|
|
of trunk groups."
|
|
INDEX { portTrunkAggregatorGroupIndex }
|
|
::= { portTrunkAggregatorStatusTable 1 }
|
|
|
|
PortTrunkAggregatorStatusEntry ::= SEQUENCE {
|
|
portTrunkAggregatorGroupIndex INTEGER,
|
|
portTrunkAggregatorGroupType INTEGER,
|
|
portTrunkAggregatorGroupMember PortList,
|
|
portTrunkAggregatorIndividual PortList,
|
|
portTrunkAggregatorLinkDown PortList
|
|
}
|
|
|
|
portTrunkAggregatorGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The trunk group identifier."
|
|
::= { portTrunkAggregatorStatusEntry 1 }
|
|
|
|
portTrunkAggregatorGroupType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
lacp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Aggregator type.
|
|
(1) The trunk group is LACP disabled and configured staticly
|
|
by administrator.
|
|
(2) The trunk group is LACP enabled. "
|
|
::= { portTrunkAggregatorStatusEntry 2 }
|
|
|
|
portTrunkAggregatorGroupMember OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ports are aggregated with other ports."
|
|
::= { portTrunkAggregatorStatusEntry 3 }
|
|
|
|
portTrunkAggregatorIndividual OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A port is LACP enabled but not aggregated with other ports."
|
|
::= { portTrunkAggregatorStatusEntry 4 }
|
|
|
|
portTrunkAggregatorLinkDown OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ports which are linked down."
|
|
::= { portTrunkAggregatorStatusEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- networkRedundancy
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- superRing OBJECT IDENTIFIER ::= { networkRedundancy 1 }
|
|
-- rstp OBJECT IDENTIFIER ::= { networkRedundancy 2 }
|
|
-- bridgeInformation OBJECT IDENTIFIER ::= { networkRedundancy 3 }
|
|
redundantRing OBJECT IDENTIFIER ::= { networkRedundancy 4 }
|
|
stp OBJECT IDENTIFIER ::= { networkRedundancy 5 }
|
|
stpBridgeInformation OBJECT IDENTIFIER ::= { networkRedundancy 6 }
|
|
mstp OBJECT IDENTIFIER ::= { networkRedundancy 7 }
|
|
mstpBridgeInformation OBJECT IDENTIFIER ::= { networkRedundancy 8 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- superRing
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- redundantRingConfigTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
redundantRingConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RedundantRingConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of configuration about redundancy protocol in the device."
|
|
::= { redundantRing 1 }
|
|
|
|
redundantRingConfigEntry OBJECT-TYPE
|
|
SYNTAX RedundantRingConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing information about current configuration
|
|
of rings."
|
|
INDEX { superRingConfigId }
|
|
::= { redundantRingConfigTable 1 }
|
|
|
|
RedundantRingConfigEntry ::= SEQUENCE {
|
|
superRingConfigId INTEGER,
|
|
superRingStatus RowStatus,
|
|
superRingName DisplayString,
|
|
superRingConfigVersion INTEGER,
|
|
superRingDevicePriority INTEGER,
|
|
superRingRingPort1 INTEGER,
|
|
superRingRingPort2 INTEGER,
|
|
superRingRingPort1PathCost INTEGER,
|
|
superRingRingPort2PathCost INTEGER,
|
|
superRingRapidDualHomingStatus INTEGER
|
|
}
|
|
|
|
superRingConfigId OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ring Id."
|
|
::= { redundantRingConfigEntry 1 }
|
|
|
|
superRingName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Super Ring name."
|
|
::= { redundantRingConfigEntry 2 }
|
|
|
|
superRingConfigVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
superRing(1),
|
|
rapidSuperRing(2),
|
|
anyRing(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Super Ring funtion version selection.
|
|
Super Ring: Backward compatible with legacy super ring mechanism.
|
|
Note: This model supports v1 non-Redundancy Management mode only.
|
|
Rapid Super Ring: New mechanism. The recovery time is less than 30ms.
|
|
Any Ring:
|
|
"
|
|
--DEFVAL { rapidSuperRing }
|
|
::= { redundantRingConfigEntry 3 }
|
|
|
|
superRingDevicePriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Super Ring device priority setting."
|
|
--DEFVAL { 128 }
|
|
::= { redundantRingConfigEntry 4 }
|
|
|
|
superRingRingPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "RingPort1 should not equal to RingRort2."
|
|
::= { redundantRingConfigEntry 5 }
|
|
|
|
superRingRingPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "RingPort2 should not equal to RingRort1."
|
|
::= { redundantRingConfigEntry 6 }
|
|
|
|
superRingRingPort1PathCost OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
--DEFVAL { 128 }
|
|
::= {redundantRingConfigEntry 7 }
|
|
|
|
superRingRingPort2PathCost OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
--DEFVAL { 128 }
|
|
::= { redundantRingConfigEntry 8 }
|
|
|
|
superRingRapidDualHomingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Rapid Dual Homing funtion status.
|
|
Rapid Dual Homing is a redundancy protocol,
|
|
which is compatible with RSTP.
|
|
(1) Rapid Dual Homing function is enabled.
|
|
(2) Rapid Dual Homing function is disabled."
|
|
--DEFVAL { disable }
|
|
::= { redundantRingConfigEntry 9 }
|
|
|
|
superRingStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Status of this ring."
|
|
::= { redundantRingConfigEntry 10 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- redundantRingStatusTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
redundantRingStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RedundantRingStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of status information about redundancy protocol in
|
|
the device."
|
|
::= { redundantRing 2 }
|
|
|
|
redundantRingStatusEntry OBJECT-TYPE
|
|
SYNTAX RedundantRingStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing information about current status
|
|
of rings."
|
|
INDEX { superRingStatusId }
|
|
::= { redundantRingStatusTable 1 }
|
|
|
|
RedundantRingStatusEntry ::= SEQUENCE {
|
|
superRingStatusId INTEGER,
|
|
superRingVersion INTEGER,
|
|
superRingDeviceRole INTEGER,
|
|
superRingRingPortList1 PortList,
|
|
superRingRingPortList2 PortList,
|
|
superRingRingStatus INTEGER,
|
|
superRingRmMac MacAddress,
|
|
superRingBlockedPort PortList,
|
|
superRingRoleTransitionCount Integer32,
|
|
superRingRingStateTransitionCount Integer32
|
|
}
|
|
|
|
superRingStatusId OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ring Id."
|
|
::= { redundantRingStatusEntry 1 }
|
|
|
|
superRingVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
superRing(1),
|
|
rapidSuperRing(2),
|
|
anyRing(3),
|
|
notSupported(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Super Ring funtion version selection.
|
|
Super Ring: Backward compatible with legacy super ring mechanism.
|
|
Note: This model supports v1 non-Redundancy Management mode only.
|
|
Rapid Super Ring: New mechanism. The recovery time is less than 30ms.
|
|
Any Ring:
|
|
Not Supported:"
|
|
::= { redundantRingStatusEntry 2 }
|
|
|
|
superRingDeviceRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
rm(2),
|
|
non-RM(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Super Ring role status.
|
|
(1) disabled.
|
|
(2) Redundancy manager.
|
|
(3) Non redundancy manager."
|
|
::= { redundantRingStatusEntry 3 }
|
|
|
|
superRingRingPortList1 OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port list for ring port1."
|
|
::= { redundantRingStatusEntry 4 }
|
|
|
|
superRingRingPortList2 OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port list for ring port2."
|
|
::= { redundantRingStatusEntry 5 }
|
|
|
|
superRingRingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
normal(2),
|
|
abnormal(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Super Ring ring status.
|
|
(1) Disabled - The ring on this device is disabled.
|
|
(1) Normal - Ring is complete.
|
|
(2) Abnormal - Ring is not complete."
|
|
::= { redundantRingStatusEntry 6 }
|
|
|
|
superRingRmMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RM mac address."
|
|
::= { redundantRingStatusEntry 7 }
|
|
|
|
superRingBlockedPort OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The blocked ports in ring Normal state."
|
|
::= { redundantRingStatusEntry 8 }
|
|
|
|
superRingRoleTransitionCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { redundantRingStatusEntry 9 }
|
|
|
|
superRingRingStateTransitionCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { redundantRingStatusEntry 10 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- rstp
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- bridgeInformation
|
|
-- rstpRootBridgeInformationTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- stp
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
stpModeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stp(1),
|
|
rstp(2),
|
|
mstp(3),
|
|
disabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable Spanning Tree protocol, Rapid Spanning Tree protocol,
|
|
or disable .
|
|
|
|
Rapid Spanning Tree Algorithm and Protocol (RSTP) provides a
|
|
loop free topology for any LAN or bridged network. RSTP is an
|
|
evolution of the Spanning Tree Protocol (STP), and was
|
|
introduced in the extension IEEE 802.1w, and provides for
|
|
faster spanning tree convergence after a topology change."
|
|
::= { stp 1 }
|
|
|
|
stpBridgeAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bridge Address."
|
|
::= { stp 2 }
|
|
|
|
stpBridgePriority OBJECT-TYPE
|
|
SYNTAX Integer32 {
|
|
priority0(0),
|
|
priority4096(4096),
|
|
priority8192(8192),
|
|
priority12288(12288),
|
|
priority16384(16384),
|
|
priority20480(20480),
|
|
priority24576(24576),
|
|
priority28672(28672),
|
|
priority32768(32768),
|
|
priority36864(36864),
|
|
priority40960(40960),
|
|
priority45056(45056),
|
|
priority49152(49152),
|
|
priority53248(53248),
|
|
priority57344(57344),
|
|
priority61440(61440)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value used to identify the root bridge. The bridge with
|
|
the lowest value has the highest priority and is selected
|
|
as the root. Enter a number 0 through 61440 in steps of
|
|
4096. If you change the value, you must restart RSTP.
|
|
This item can't be modified, if stpStatus was disabled."
|
|
::= { stp 3 }
|
|
|
|
stpMaxAge OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds a bridge waits without receiving
|
|
Spanning-Tree Protocol configuration messages before
|
|
attempting a reconfiguration. Enter a number 6 through 40.
|
|
Note: 2*(Forward Delay Time-1) should be greater than or
|
|
equal to the Max Age. The Max Age should be greater than
|
|
or equal to 2*(Hello Time + 1).
|
|
This item can't be modified, if stpStatus was disabled."
|
|
::= { stp 4 }
|
|
|
|
stpHelloTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds between the transmission of
|
|
Spanning-Tree Protocol configuration messages.
|
|
Enter a number 1 through 10
|
|
Note: 2*(Forward Delay Time-1) should be greater than or
|
|
equal to the Max Age. The Max Age should be greater
|
|
than or equal to 2*(Hello Time + 1).
|
|
This item can't be modified, if stpStatus was disabled."
|
|
::= { stp 5 }
|
|
|
|
stpForwardDelayTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds a port waits before changing
|
|
from its Spanning-Tree Protocol learning and listening
|
|
states to the forwarding state. Enter a number 4 through 30.
|
|
Note:2*(Forward Delay Time-1) should be greater than or
|
|
equal to the Max Age. The Max Age should be greater than
|
|
or equal to 2*(Hello Time + 1).
|
|
This item can't be modified, if stpStatus was disabled."
|
|
::= { stp 6 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- stpPerPortCfgTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
stpPerPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StpPerPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
STP on each port."
|
|
::= { stp 7 }
|
|
|
|
stpPerPortCfgEntry OBJECT-TYPE
|
|
SYNTAX StpPerPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information configuring STP on a port."
|
|
INDEX { stpPerPortCfgPortNum }
|
|
::= { stpPerPortCfgTable 1 }
|
|
|
|
StpPerPortCfgEntry ::= SEQUENCE {
|
|
stpPerPortCfgPortNum Integer32,
|
|
stpPerPortCfgStpState INTEGER,
|
|
stpPerPortCfgPathCost Integer32,
|
|
stpPerPortCfgPriority Integer32,
|
|
stpPerPortCfgLinkType INTEGER,
|
|
stpPerPortCfgEdgePort INTEGER
|
|
}
|
|
|
|
stpPerPortCfgPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The port number."
|
|
::= { stpPerPortCfgEntry 1 }
|
|
|
|
stpPerPortCfgStpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable STP/RSTP/MSTP at this port. Disable STP state
|
|
when connecting a device in order to avoid STP waiting periods."
|
|
::= { stpPerPortCfgEntry 2 }
|
|
|
|
stpPerPortCfgPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The cost of the path to the other bridge from this
|
|
transmitting bridge at the specified port. Enter a number from
|
|
1 through 200000000.
|
|
(0 will auto set path cost to standard recommended value)"
|
|
::= { stpPerPortCfgEntry 3 }
|
|
|
|
stpPerPortCfgPriority OBJECT-TYPE
|
|
SYNTAX Integer32 {
|
|
priority0(0),
|
|
priority16(16),
|
|
priority32(32),
|
|
priority48(48),
|
|
priority64(64),
|
|
priority80(80),
|
|
priority96(96),
|
|
priority112(112),
|
|
priority128(128),
|
|
priority144(144),
|
|
priority160(160),
|
|
priority176(176),
|
|
priority192(192),
|
|
priority208(208),
|
|
priority224(224),
|
|
priority240(240)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Decide which port should be blocked by priority in LAN. Enter
|
|
a number from 0 through 240 in steps of 16."
|
|
::= { stpPerPortCfgEntry 4 }
|
|
|
|
stpPerPortCfgLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
point2Point(2),
|
|
shared(3),
|
|
notSupport(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Some of the rapid state transactions that are
|
|
possible within RSTP are dependent upon whether
|
|
the Port concerned can only be connected to
|
|
exactly one other Bridge(ie., it is served by a
|
|
point-to-point LAN segment), or can be connected
|
|
to two or more Bridges(i.e., it is served by a
|
|
shared medium LAN segment).
|
|
The adminPointToPointMAC allow the p2p status
|
|
of the link to be manipulated adminitratively."
|
|
::= { stpPerPortCfgEntry 5 }
|
|
|
|
stpPerPortCfgEdgePort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Present in implementations that support the
|
|
identification of edge ports. All ports
|
|
directly connected to end stations cannot
|
|
create bridging loops in the network and can
|
|
thus directly transition to forwarding,
|
|
skipping the listening and learning stages."
|
|
::= { stpPerPortCfgEntry 6 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- stpBridgeInformation
|
|
-- stpRootInformationTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
stpRootInformationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StpRootInformationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information about root bridge
|
|
of rapid spanning tree in this system."
|
|
::= { stpBridgeInformation 1 }
|
|
|
|
stpRootInformationEntry OBJECT-TYPE
|
|
SYNTAX StpRootInformationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about root bridge information of the STP."
|
|
INDEX { stpRootInformationIndex }
|
|
::= { stpRootInformationTable 1 }
|
|
|
|
StpRootInformationEntry ::= SEQUENCE {
|
|
stpRootInformationIndex Integer32,
|
|
stpRootInformationRootAddress DisplayString,
|
|
stpRootInformationRootPriority Integer32,
|
|
stpRootInformationRootPort DisplayString,
|
|
stpRootInformationRootPathCost Integer32,
|
|
stpRootInformationMaxAge Integer32,
|
|
stpRootInformationHelloTime Integer32,
|
|
stpRootInformationForwardDelay Integer32
|
|
}
|
|
|
|
stpRootInformationIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of root bridge information table."
|
|
::= { stpRootInformationEntry 1 }
|
|
|
|
stpRootInformationRootAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Address."
|
|
::= { stpRootInformationEntry 2 }
|
|
|
|
stpRootInformationRootPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Priority."
|
|
::= { stpRootInformationEntry 3 }
|
|
|
|
stpRootInformationRootPort OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Port."
|
|
::= { stpRootInformationEntry 4 }
|
|
|
|
stpRootInformationRootPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Path Cost."
|
|
::= { stpRootInformationEntry 5 }
|
|
|
|
stpRootInformationMaxAge OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Max Age."
|
|
::= { stpRootInformationEntry 6 }
|
|
|
|
stpRootInformationHelloTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Hello Time."
|
|
::= { stpRootInformationEntry 7 }
|
|
|
|
stpRootInformationForwardDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Forward Delay Time."
|
|
::= { stpRootInformationEntry 8 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- stpPerPortInfoTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
stpPerPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StpPerPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
rapid spanning tree (Per port)."
|
|
::= { stpBridgeInformation 2 }
|
|
|
|
stpPerPortInfoEntry OBJECT-TYPE
|
|
SYNTAX StpPerPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing inforamtion
|
|
about STP (Per port)."
|
|
INDEX { stpPerPortInfoPortNum }
|
|
::= { stpPerPortInfoTable 1 }
|
|
|
|
StpPerPortInfoEntry ::= SEQUENCE {
|
|
stpPerPortInfoPortNum Integer32,
|
|
stpPerPortInfoRole INTEGER,
|
|
stpPerPortInfoState INTEGER,
|
|
stpPerPortInfoPathCost Integer32,
|
|
stpPerPortInfoPriority Integer32,
|
|
stpPerPortInfoLinkType INTEGER,
|
|
stpPerPortInfoEdgePort INTEGER
|
|
}
|
|
|
|
stpPerPortInfoPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port number."
|
|
::= { stpPerPortInfoEntry 1 }
|
|
|
|
stpPerPortInfoRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
root(1),
|
|
alternated(2),
|
|
designated(3),
|
|
backup(4),
|
|
disabled(5),
|
|
nonStp(6),
|
|
unknown(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Descriptive information about RSTP switch port roles:
|
|
root(1) A forwarding port that has been elected for
|
|
the spanning-tree topology.
|
|
alternate(2) An alternate path to the root bridge. This
|
|
path is different than using the root port.
|
|
designated(3) A forwarding port for every LAN segment.
|
|
backup(4) A backup/redundant path to a segment where
|
|
another switch port already connects.
|
|
disabled(5) RSTP is disabled on this port."
|
|
|
|
::= { stpPerPortInfoEntry 2 }
|
|
|
|
stpPerPortInfoState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
learning(2),
|
|
forwarding(3),
|
|
blocking(4),
|
|
unknown(5),
|
|
nonStp(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { stpPerPortInfoEntry 3 }
|
|
|
|
|
|
|
|
stpPerPortInfoPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The cost of the path to the other bridge from
|
|
this transmitting bridge at the specified port.
|
|
Enter a number 1 through 200000000."
|
|
::= { stpPerPortInfoEntry 4 }
|
|
|
|
stpPerPortInfoPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Decide which port should be blocked by priority
|
|
in LAN. Enter a number 0 through 240 in steps of
|
|
16."
|
|
::= { stpPerPortInfoEntry 5 }
|
|
|
|
stpPerPortInfoLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
point2Point(2),
|
|
shared(3),
|
|
notSupport(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Some of the rapid state transactions that are
|
|
possible within RSTP are dependent upon whether
|
|
the Port concerned can only be connected to
|
|
exactly one other Bridge(ie., it is served by a
|
|
point-to-point LAN segment), or can be connected
|
|
to two or more Bridges(i.e., it is served by a
|
|
shared medium LAN segment).
|
|
|
|
The adminPointToPointMAC allow the p2p status
|
|
of the link to be manipulated adminitratively.
|
|
|
|
STP does not support this function."
|
|
::= { stpPerPortInfoEntry 6 }
|
|
|
|
stpPerPortInfoEdgePort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Present in implementations that support the
|
|
identification of edge ports. All ports
|
|
directly connected to end stations cannot
|
|
create bridging loops in the network and can
|
|
thus directly transition to forwarding,
|
|
skipping the listening and learning stages."
|
|
::= { stpPerPortInfoEntry 7 }
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- mstp
|
|
---------------------------------------------------------------------------
|
|
mstpRegionName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MSTP region name."
|
|
::= { mstp 1 }
|
|
|
|
mstpRegionRevision OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MSTP region revision."
|
|
::= { mstp 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- mstpPerInstCfgTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
mstpPerInstCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MstpPerInstCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
STP on each port."
|
|
::= { mstp 3 }
|
|
|
|
mstpPerInstCfgEntry OBJECT-TYPE
|
|
SYNTAX MstpPerInstCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information configuring MSTP on a instance."
|
|
INDEX { mstpPerInstCfgInstanceID }
|
|
::= { mstpPerInstCfgTable 1 }
|
|
|
|
MstpPerInstCfgEntry ::= SEQUENCE {
|
|
mstpPerInstCfgInstanceID Integer32,
|
|
mstpPerInstCfgVlanGroup DisplayString,
|
|
mstpPerInstCfgInstancePriority Integer32,
|
|
mstpPerInstCfgStatus RowStatus
|
|
}
|
|
|
|
mstpPerInstCfgInstanceID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The instance ID."
|
|
::= { mstpPerInstCfgEntry 1 }
|
|
|
|
mstpPerInstCfgVlanGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "VLAN group of instance."
|
|
::= { mstpPerInstCfgEntry 2 }
|
|
|
|
mstpPerInstCfgInstancePriority OBJECT-TYPE
|
|
SYNTAX Integer32 {
|
|
priority0(0),
|
|
priority4096(4096),
|
|
priority8192(8192),
|
|
priority12288(12288),
|
|
priority16384(16384),
|
|
priority20480(20480),
|
|
priority24576(24576),
|
|
priority28672(28672),
|
|
priority32768(32768),
|
|
priority36864(36864),
|
|
priority40960(40960),
|
|
priority45056(45056),
|
|
priority49152(49152),
|
|
priority53248(53248),
|
|
priority57344(57344),
|
|
priority61440(61440)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value used to identify the instance root. The instance with
|
|
the lowest value has the highest priority and is selected
|
|
as the root. Enter a number 0 through 61440 in steps of
|
|
4096."
|
|
::= { mstpPerInstCfgEntry 3 }
|
|
|
|
mstpPerInstCfgStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Status of this Instance."
|
|
::= { mstpPerInstCfgEntry 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- mstpPerPortCfgTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
mstpPerPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MstpPerPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
MSTP on each port."
|
|
::= { mstp 4 }
|
|
|
|
mstpPerPortCfgEntry OBJECT-TYPE
|
|
SYNTAX MstpPerPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information configuring MSTP on a port."
|
|
INDEX { mstpPerPortCfgIndex }
|
|
::= { mstpPerPortCfgTable 1 }
|
|
|
|
MstpPerPortCfgEntry ::= SEQUENCE {
|
|
mstpPerPortCfgIndex Integer32,
|
|
mstpPerPortCfgInstanceID Integer32,
|
|
mstpPerPortCfgPortNum Integer32,
|
|
mstpPerPortCfgPathCost Integer32,
|
|
mstpPerPortCfgPriority Integer32,
|
|
mstpPerPortCfgLinkType INTEGER,
|
|
mstpPerPortCfgEdgePort INTEGER
|
|
}
|
|
|
|
mstpPerPortCfgIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of MstpPerPortCfgEntry."
|
|
::= { mstpPerPortCfgEntry 1 }
|
|
|
|
mstpPerPortCfgInstanceID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The instance ID."
|
|
::= { mstpPerPortCfgEntry 2 }
|
|
|
|
mstpPerPortCfgPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port number."
|
|
::= { mstpPerPortCfgEntry 3 }
|
|
|
|
mstpPerPortCfgPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The cost of the path to the other bridge from this
|
|
transmitting bridge at the specified port. Enter a number from
|
|
1 through 200000000.
|
|
(0 will auto set path cost to standard recommended value)"
|
|
::= { mstpPerPortCfgEntry 4 }
|
|
|
|
mstpPerPortCfgPriority OBJECT-TYPE
|
|
SYNTAX Integer32 {
|
|
priority0(0),
|
|
priority16(16),
|
|
priority32(32),
|
|
priority48(48),
|
|
priority64(64),
|
|
priority80(80),
|
|
priority96(96),
|
|
priority112(112),
|
|
priority128(128),
|
|
priority144(144),
|
|
priority160(160),
|
|
priority176(176),
|
|
priority192(192),
|
|
priority208(208),
|
|
priority224(224),
|
|
priority240(240)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Decide which port should be blocked by priority in LAN. Enter
|
|
a number from 0 through 240 in steps of 16."
|
|
::= { mstpPerPortCfgEntry 5 }
|
|
|
|
mstpPerPortCfgLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
point2Point(2),
|
|
shared(3),
|
|
notSupport(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Some of the rapid state transactions that are
|
|
possible within RSTP are dependent upon whether
|
|
the Port concerned can only be connected to
|
|
exactly one other Bridge(ie., it is served by a
|
|
point-to-point LAN segment), or can be connected
|
|
to two or more Bridges(i.e., it is served by a
|
|
shared medium LAN segment).
|
|
The adminPointToPointMAC allow the p2p status
|
|
of the link to be manipulated adminitratively."
|
|
::= { mstpPerPortCfgEntry 6 }
|
|
|
|
mstpPerPortCfgEdgePort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Present in implementations that support the
|
|
identification of edge ports. All ports
|
|
directly connected to end stations cannot
|
|
create bridging loops in the network and can
|
|
thus directly transition to forwarding,
|
|
skipping the listening and learning stages."
|
|
::= { mstpPerPortCfgEntry 7 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- mstpBridgeInformation
|
|
-- mstpRootInformationTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
mstpRootInformationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MstpRootInformationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information about root bridge
|
|
of rapid spanning tree in this system."
|
|
::= { mstpBridgeInformation 1 }
|
|
|
|
mstpRootInformationEntry OBJECT-TYPE
|
|
SYNTAX MstpRootInformationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about root bridge information of the MSTP."
|
|
INDEX { mstpRootInformationInstanceID }
|
|
::= { mstpRootInformationTable 1 }
|
|
|
|
MstpRootInformationEntry ::= SEQUENCE {
|
|
-- mstpRootInformationIndex Integer32,
|
|
mstpRootInformationInstanceID Integer32,
|
|
mstpRootInformationRootAddress DisplayString,
|
|
mstpRootInformationRootPriority Integer32,
|
|
mstpRootInformationRootPort DisplayString,
|
|
mstpRootInformationRootPathCost Integer32,
|
|
mstpRootInformationMaxAge Integer32,
|
|
mstpRootInformationHelloTime Integer32,
|
|
mstpRootInformationForwardDelay Integer32
|
|
}
|
|
|
|
--mstpRootInformationIndex OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "Index of root bridge information table."
|
|
-- ::= { mstpRootInformationEntry 1 }
|
|
|
|
mstpRootInformationInstanceID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The instance ID."
|
|
::= { mstpRootInformationEntry 1 }
|
|
|
|
mstpRootInformationRootAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Address."
|
|
::= { mstpRootInformationEntry 2 }
|
|
|
|
mstpRootInformationRootPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Priority."
|
|
::= { mstpRootInformationEntry 3 }
|
|
|
|
mstpRootInformationRootPort OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Port."
|
|
::= { mstpRootInformationEntry 4 }
|
|
|
|
mstpRootInformationRootPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Path Cost."
|
|
::= { mstpRootInformationEntry 5 }
|
|
|
|
mstpRootInformationMaxAge OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Max Age."
|
|
::= { mstpRootInformationEntry 6 }
|
|
|
|
mstpRootInformationHelloTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Hello Time."
|
|
::= { mstpRootInformationEntry 7 }
|
|
|
|
mstpRootInformationForwardDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Forward Delay Time."
|
|
::= { mstpRootInformationEntry 8 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- mstpPerPortInfoTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
mstpPerPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MstpPerPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
rapid spanning tree (Per port)."
|
|
::= { mstpBridgeInformation 2 }
|
|
|
|
mstpPerPortInfoEntry OBJECT-TYPE
|
|
SYNTAX MstpPerPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about MSTP (Per port)."
|
|
INDEX { mstpPerPortInfoIndex }
|
|
::= { mstpPerPortInfoTable 1 }
|
|
|
|
MstpPerPortInfoEntry ::= SEQUENCE {
|
|
mstpPerPortInfoIndex Integer32,
|
|
mstpPerPortInfoInstanceID Integer32,
|
|
mstpPerPortInfoPortNum Integer32,
|
|
mstpPerPortInfoRole INTEGER,
|
|
mstpPerPortInfoState INTEGER,
|
|
mstpPerPortInfoPathCost Integer32,
|
|
mstpPerPortInfoPriority Integer32,
|
|
mstpPerPortInfoLinkType INTEGER,
|
|
mstpPerPortInfoEdgePort INTEGER
|
|
}
|
|
|
|
mstpPerPortInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of MstpPerPortInfoEntry."
|
|
::= { mstpPerPortInfoEntry 1 }
|
|
|
|
mstpPerPortInfoInstanceID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The instance ID."
|
|
::= { mstpPerPortInfoEntry 2 }
|
|
|
|
mstpPerPortInfoPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port number."
|
|
::= { mstpPerPortInfoEntry 3 }
|
|
|
|
mstpPerPortInfoRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
root(1),
|
|
alternate(2),
|
|
designated(3),
|
|
backup(4),
|
|
master(5),
|
|
disabled(6),
|
|
boundary(7),
|
|
unknown(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Descriptive information about MSTP switch port roles:
|
|
disabled(1) MSTP is disabled on this port.
|
|
root(2) A forwarding port that has been elected for
|
|
the spanning-tree topology.
|
|
designated(3) A forwarding port for every LAN segment.
|
|
alternate(4) An alternate path to the root bridge. This
|
|
path is different than using the root port.
|
|
backup(5) A backup/redundant path to a segment where
|
|
another switch port already connects."
|
|
::= { mstpPerPortInfoEntry 4 }
|
|
|
|
mstpPerPortInfoState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
listening(2),
|
|
learning(3),
|
|
forwarding(4),
|
|
blocking(5),
|
|
unknown(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { mstpPerPortInfoEntry 5 }
|
|
|
|
mstpPerPortInfoPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The cost of the path to the other bridge from
|
|
this transmitting bridge at the specified port.
|
|
Enter a number 1 through 200000000."
|
|
::= { mstpPerPortInfoEntry 6 }
|
|
|
|
mstpPerPortInfoPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Decide which port should be blocked by priority
|
|
in LAN. Enter a number 0 through 240 in steps of
|
|
16."
|
|
::= { mstpPerPortInfoEntry 7 }
|
|
|
|
mstpPerPortInfoLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p2p-bound-stp(1),
|
|
p2p-bound-rstp(2),
|
|
p2p-bound-mstp(3),
|
|
p2p-internal-mstp(4),
|
|
shared-bound-stp(5),
|
|
shared-bound-rstp(6),
|
|
shared-bound-mstp(7),
|
|
shared-internal-mstp(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Some of the rapid state transactions that are
|
|
possible within MSTP are dependent upon whether
|
|
the Port concerned can only be connected to
|
|
exactly one other Bridge(ie., it is served by a
|
|
point-to-point LAN segment), or can be connected
|
|
to two or more Bridges(i.e., it is served by a
|
|
shared medium LAN segment).
|
|
|
|
The adminPointToPointMAC allow the p2p status
|
|
of the link to be manipulated adminitratively."
|
|
::= { mstpPerPortInfoEntry 8 }
|
|
|
|
mstpPerPortInfoEdgePort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Present in implementations that support the
|
|
identification of edge ports. All ports
|
|
directly connected to end stations cannot
|
|
create bridging loops in the network and can
|
|
thus directly transition to forwarding,
|
|
skipping the listening and learning stages."
|
|
::= { mstpPerPortInfoEntry 9 }
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- vlan
|
|
---------------------------------------------------------------------------
|
|
vlanManagementVlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VLAN from which managemnet traffic can access the device.
|
|
By default, VLAN 1 is management VLAN."
|
|
DEFVAL { 1 }
|
|
::= { vlan 1 }
|
|
|
|
-- vlanStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- disabled(1),
|
|
-- ieee8021qVlan(2),
|
|
-- portBasedVlan(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION ""
|
|
-- ::= { vlan 2 }
|
|
|
|
ieee8021qVlan OBJECT IDENTIFIER ::= { vlan 2 }
|
|
-- portBasedVlan OBJECT IDENTIFIER ::= { vlan 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Vlan Port Configuration
|
|
-- -----------------------------------------------------------------------------
|
|
dot1qPortVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qPortVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing per port control and status information
|
|
for IEEE802.1Q VLAN configuration in the device."
|
|
::= { ieee8021qVlan 1 }
|
|
|
|
dot1qPortVlanEntry OBJECT-TYPE
|
|
SYNTAX Dot1qPortVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information controlling IEEE802.1Q VLAN configuration for
|
|
a port on the device."
|
|
INDEX { dot1qPortIndex }
|
|
::= { dot1qPortVlanTable 1 }
|
|
|
|
Dot1qPortVlanEntry ::= SEQUENCE {
|
|
dot1qPortIndex INTEGER,
|
|
dot1qPvid INTEGER,
|
|
dot1qPortAcceptableFrameTypes INTEGER,
|
|
dot1qPortIngressFiltering INTEGER
|
|
}
|
|
|
|
dot1qPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port identifier."
|
|
::= { dot1qPortVlanEntry 1 }
|
|
|
|
dot1qPvid OBJECT-TYPE
|
|
SYNTAX INTEGER(1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The default Port VID, the VLAN ID assigned to an untagged
|
|
frame or a Priority-Tagged frame received on the port."
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.1"
|
|
DEFVAL { 1 }
|
|
::= { dot1qPortVlanEntry 2 }
|
|
|
|
dot1qPortAcceptableFrameTypes OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
admitAll(1),
|
|
admitOnlyVlanTagged(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When admitOnlyVlanTagged(2) the device will discard untagged
|
|
frames or Priority-Tagged only frames received on this port.
|
|
When admitAll(1), untagged frames or Priority-Tagged only
|
|
frames received on this port will be accepted and assigned
|
|
the PVID for this frame. This control does not affect
|
|
VLAN independent BPDU frames, such as SuperRing, STP, GVRP
|
|
and LACP. It does affect VLAN dependent BPDU frames, such
|
|
as GMRP."
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.3"
|
|
DEFVAL { admitAll }
|
|
::= { dot1qPortVlanEntry 3 }
|
|
|
|
dot1qPortIngressFiltering OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When true(1) the device will discard incoming frames whose
|
|
VLAN classification do not include this port in its Member set.
|
|
When false(2), the port will accept all incoming frames
|
|
regardless its VLAN classification.
|
|
This control does not affect VLAN independent BPDU frames,
|
|
such as SuperRing, STP, GVRP and LACP. It does affect VLAN
|
|
dependent BPDU frames, such as GMRP."
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.4"
|
|
DEFVAL { false }
|
|
::= { dot1qPortVlanEntry 4 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Static VLAN Database
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dot1qVlanStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qVlanStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing configuration information for each VLAN
|
|
configured into the device by management. All entries are
|
|
permanent and will be restored after the device is reset.
|
|
Upto 64 VLANs can be configured in this device.
|
|
|
|
IEEE 802.1Q Virtual LANs (VLANs) allow a single physical LAN
|
|
to be partitioned into several smaller logical LANs. VLANs
|
|
limit the broadcast domain, improve security and performance
|
|
and are ideal for separating systems or departments from each
|
|
other."
|
|
-- The maximun number of VLAN supported by this device is 64."
|
|
::= { ieee8021qVlan 2 }
|
|
|
|
dot1qVlanStaticEntry OBJECT-TYPE
|
|
SYNTAX Dot1qVlanStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Static information of a VLAN configured into the device by
|
|
management."
|
|
INDEX { dot1qVlanIndex }
|
|
::= { dot1qVlanStaticTable 1 }
|
|
|
|
Dot1qVlanStaticEntry ::= SEQUENCE {
|
|
dot1qVlanIndex INTEGER,
|
|
dot1qVlanStaticName DisplayString,
|
|
dot1qVlanStaticEgressPorts PortList,
|
|
dot1qVlanStaticUntaggedPorts PortList,
|
|
dot1qVlanStaticTaggedPorts PortList,
|
|
dot1qVlanStaticRowStatus RowStatus
|
|
}
|
|
|
|
dot1qVlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The VLAN Identifier (VID) refering to this VLAN. The valid
|
|
range is from 1 to 4094."
|
|
::= { dot1qVlanStaticEntry 1 }
|
|
|
|
dot1qVlanStaticName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..12))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively assigned string, which is used to identify
|
|
the VLAN."
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanStaticEntry 2 }
|
|
|
|
dot1qVlanStaticEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of ports which are permanently configured to
|
|
transmitting traffic for this VLAN as either tagged or
|
|
untagged frames.
|
|
|
|
Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'.
|
|
|
|
Changes to this object affect the per-port per-VLAN
|
|
Registrar control for Registration Fixed for the
|
|
relevant GVRP state machine on each port.
|
|
|
|
A port may not be added in this set if it is already a
|
|
member of the set of ports in dot1qVlanForbiddenEgressPorts.
|
|
|
|
The default value of this object is a string of zeros,
|
|
indicating not fixed."
|
|
::= { dot1qVlanStaticEntry 3 }
|
|
|
|
dot1qVlanStaticUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The set of ports which are permanently configured to
|
|
transmitting traffic for this VLAN as untagged frames.
|
|
|
|
Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'.
|
|
|
|
Changes to this object affect the per-port per-VLAN
|
|
Registrar control for Registration Fixed for the
|
|
relevant GVRP state machine on each port.
|
|
|
|
The default value of this object for the default VLAN is a
|
|
portlist including all ports. There is no specified default
|
|
for other VLANs."
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanStaticEntry 4 }
|
|
|
|
dot1qVlanStaticTaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The set of ports which are permanently configured to
|
|
transmitting traffic for this VLAN as tagged frames.
|
|
|
|
Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'.
|
|
|
|
Changes to this object affect the per-port per-VLAN
|
|
Registrar control for Registration Fixed for the
|
|
relevant GVRP state machine on each port.
|
|
|
|
The default value of this object for the default VLAN is a
|
|
portlist including all ports. There is no specified default
|
|
for other VLANs."
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanStaticEntry 5 }
|
|
|
|
dot1qVlanStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to manage to creation and deletion of
|
|
a VLAN, and is used to indicate the status of this entry.
|
|
|
|
To Creating and activate a VLAN, first select a unused VID for
|
|
dot1qVlanIndex and then set its dot1qVlanStaticRowStatus to
|
|
'createAndGo'. The VLAN will be created in the device without
|
|
tagged or untagged ports. A default VLAN name is assigned and
|
|
the status is set to 'active'.
|
|
|
|
To configure tagged and untagged port members of the VLAN,
|
|
assign appropriate of dot1qVlanStaticTaggedPorts and
|
|
dot1qVlanStaticUntaggedPorts. A set operation takes effect
|
|
on the device immediately.
|
|
|
|
To delete a VLAN, select the VID for dot1qVlanIndex and set
|
|
dot1qVlanStaticRowStatus to 'destory'. The row and the
|
|
corresponding VLAN configurarion will be removed from the
|
|
device. VLAN 1 is the default VLAN and can never be deleted.
|
|
All untagged traffic falls into this VLAN by default.
|
|
|
|
'createAndWait', 'notInService', 'notReady' have no effects."
|
|
::= { dot1qVlanStaticEntry 6 }
|
|
|
|
|
|
--dot1qVlanForbiddenEgressPorts OBJECT-TYPE
|
|
-- SYNTAX PortList
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The set of ports which are prohibited by management
|
|
-- from being included in the egress list for this VLAN.
|
|
-- Changes to this object that cause a port to be included
|
|
-- or excluded affect the per-port per-VLAN Registrar
|
|
-- control for Registration Forbidden for the relevant
|
|
-- GVRP state machine on each port. A port may not be
|
|
-- added in this set if it is already a member of the set
|
|
-- of ports in dot1qVlanStaticEgressPorts. The default
|
|
-- value of this object is a string of zeros of appropriate
|
|
-- length, excluding all ports from the forbidden set."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
|
|
-- ::= { dot1qVlanStaticEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- GVRP configration
|
|
-- -----------------------------------------------------------------------------
|
|
dot1qGvrp OBJECT IDENTIFIER ::= { ieee8021qVlan 3 }
|
|
|
|
dot1qGvrpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable GVRP Protocol. "
|
|
DEFVAL { disabled }
|
|
::= { dot1qGvrp 1 }
|
|
|
|
|
|
dot1qPortGvrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qPortGvrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing per port control and status information
|
|
for GVRP configuration in the device."
|
|
::= { dot1qGvrp 2 }
|
|
|
|
dot1qPortGvrpEntry OBJECT-TYPE
|
|
SYNTAX Dot1qPortGvrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information controlling GVRP configuration for a port on the
|
|
device."
|
|
INDEX { dot1qPortGvrpIndex }
|
|
::= { dot1qPortGvrpTable 1 }
|
|
|
|
Dot1qPortGvrpEntry ::= SEQUENCE {
|
|
dot1qPortGvrpIndex INTEGER,
|
|
dot1qPortGvrpStatus INTEGER,
|
|
-- dot1qPortGvrpRegistrationMode INTEGER,
|
|
dot1qPortGarpJoinTimer TimeInterval,
|
|
dot1qPortGarpLeaveTimer TimeInterval,
|
|
dot1qPortGarpLeaveAllTimer TimeInterval
|
|
}
|
|
|
|
dot1qPortGvrpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The port identifier."
|
|
::= { dot1qPortGvrpEntry 1 }
|
|
|
|
dot1qPortGvrpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The state of GVRP operation on this port. The value enabled(1)
|
|
indicates that GVRP is enabled on this port, as long as
|
|
dot1qGvrpStatus is also enabled for this device. When disabled(2)
|
|
but dot1qGvrpStatus is still enabled for the device, GVRP is
|
|
disabled on this port: any GVRP packets received will be
|
|
silently discarded and no GVRP registrations will be propagated
|
|
from other ports. This object affects all GVRP Applicant and
|
|
Registrar state machines on this port. A transition from
|
|
disabled(2) to enabled(1) will cause a reset of all GVRP state
|
|
machines on this port."
|
|
DEFVAL { enabled }
|
|
::= { dot1qPortGvrpEntry 2 }
|
|
|
|
-- dot1qPortGvrpRegistrationMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- registrationFixed(1),
|
|
-- registrationForbidden(2),
|
|
-- registrationNormal(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Administrative controls"
|
|
-- ::= { dot1qPortGvrpEntry 3 }
|
|
|
|
dot1qPortGarpJoinTimer OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The GARP Join timer, in centiseconds."
|
|
DEFVAL { 20 }
|
|
::= { dot1qPortGvrpEntry 3 }
|
|
|
|
dot1qPortGarpLeaveTimer OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The GARP Leave time, in centiseconds."
|
|
DEFVAL { 60 }
|
|
::= { dot1qPortGvrpEntry 4 }
|
|
|
|
dot1qPortGarpLeaveAllTimer OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The GARP LeaveAll time, in centiseconds."
|
|
DEFVAL { 1000 }
|
|
::= { dot1qPortGvrpEntry 5 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Vlan Current Configuration Table
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dot1qVlanCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qVlanCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information about currently configured
|
|
VLANs, either by (local or network) management, or dynamically
|
|
created as a result of GVRP requests received."
|
|
::= { ieee8021qVlan 4 }
|
|
|
|
dot1qVlanCurrentEntry OBJECT-TYPE
|
|
SYNTAX Dot1qVlanCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information for a VLAN configured into the device by
|
|
(local or network) management, or dynamically created
|
|
as a result of GVRP requests received."
|
|
INDEX { dot1qVlanCurrentIndex }
|
|
::= { dot1qVlanCurrentTable 1 }
|
|
|
|
Dot1qVlanCurrentEntry ::= SEQUENCE {
|
|
dot1qVlanCurrentIndex INTEGER,
|
|
dot1qVlanCurrentEgressPorts PortList,
|
|
dot1qVlanCurrentUntaggedPorts PortList,
|
|
dot1qVlanStatus INTEGER
|
|
-- dot1qVlanPortFa1 VlanEgressMode,
|
|
-- dot1qVlanPortFa2 VlanEgressMode,
|
|
-- dot1qVlanPortFa3 VlanEgressMode,
|
|
-- dot1qVlanPortFa4 VlanEgressMode,
|
|
-- dot1qVlanPortFa5 VlanEgressMode,
|
|
-- dot1qVlanPortFa6 VlanEgressMode,
|
|
-- dot1qVlanPortFa7 VlanEgressMode,
|
|
-- dot1qVlanPortGi8 VlanEgressMode,
|
|
-- dot1qVlanPortGi9 VlanEgressMode,
|
|
-- dot1qVlanPortGi10 VlanEgressMode
|
|
}
|
|
|
|
dot1qVlanCurrentIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The VLAN Identifier (VID) refering to this VLAN."
|
|
::= { dot1qVlanCurrentEntry 1 }
|
|
|
|
dot1qVlanCurrentEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of ports which are transmitting traffic for
|
|
this VLAN as either tagged or untagged frames."
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanCurrentEntry 2 }
|
|
|
|
dot1qVlanCurrentUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of ports which are transmitting traffic for
|
|
this VLAN as untagged frames."
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanCurrentEntry 3 }
|
|
|
|
dot1qVlanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
permanent(2),
|
|
dynamicGvrp(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this entry.
|
|
other(1) - this entry is currently in use but the
|
|
conditions under which it will remain so differ
|
|
from the following values.
|
|
permanent(2) - this entry, corresponding to an entry
|
|
in dot1qVlanStaticTable, is currently in use and
|
|
will remain so after the next reset of the
|
|
device. The port lists for this entry include
|
|
ports from the equivalent dot1qVlanStaticTable
|
|
entry and ports learnt dynamically.
|
|
dynamicGvrp(3) - this entry is currently in use
|
|
and will remain so until removed by GVRP. There
|
|
is no static entry for this VLAN and it will be
|
|
removed when the last port leaves the VLAN."
|
|
::= { dot1qVlanCurrentEntry 4 }
|
|
|
|
-- dot1qVlanPortFa1 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Fa1."
|
|
-- ::= { dot1qVlanCurrentEntry 5 }
|
|
--
|
|
-- dot1qVlanPortFa2 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Fa2."
|
|
-- ::= { dot1qVlanCurrentEntry 6 }
|
|
--
|
|
-- dot1qVlanPortFa3 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Fa3."
|
|
-- ::= { dot1qVlanCurrentEntry 7 }
|
|
--
|
|
-- dot1qVlanPortFa4 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Fa4."
|
|
-- ::= { dot1qVlanCurrentEntry 8 }
|
|
--
|
|
-- dot1qVlanPortFa5 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Fa5."
|
|
-- ::= { dot1qVlanCurrentEntry 9 }
|
|
--
|
|
-- dot1qVlanPortFa6 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Fa6."
|
|
-- ::= { dot1qVlanCurrentEntry 10 }
|
|
--
|
|
-- dot1qVlanPortFa7 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Fa7."
|
|
-- ::= { dot1qVlanCurrentEntry 11 }
|
|
--
|
|
-- dot1qVlanPortGi8 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Gi8."
|
|
-- ::= { dot1qVlanCurrentEntry 12 }
|
|
--
|
|
-- dot1qVlanPortGi9 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Gi9."
|
|
-- ::= { dot1qVlanCurrentEntry 13 }
|
|
--
|
|
-- dot1qVlanPortGi10 OBJECT-TYPE
|
|
-- SYNTAX VlanEgressMode
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The vlan egress mode of port Gi10"
|
|
-- ::= { dot1qVlanCurrentEntry 14 }
|
|
--
|
|
|
|
---------------------------------------------------------------------------
|
|
-- dot1qTunnel/Q-in-Q
|
|
---------------------------------------------------------------------------
|
|
dot1qTunnel OBJECT IDENTIFIER ::= { ieee8021qVlan 5 }
|
|
dot1qTunnelEtherType OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (2))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ethertype/TPID"
|
|
DEFVAL { '8100'H }
|
|
::= { dot1qTunnel 1 }
|
|
|
|
dot1qTunnelPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qTunnelPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing per tunnel access or uplink port information in the device."
|
|
::= { dot1qTunnel 2 }
|
|
|
|
dot1qTunnelPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1qTunnelPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information controlling tunnel configuration for a port on the device."
|
|
INDEX { dot1qTunnelPortIndex }
|
|
::= { dot1qTunnelPortTable 1 }
|
|
|
|
Dot1qTunnelPortEntry ::= SEQUENCE {
|
|
dot1qTunnelPortIndex INTEGER,
|
|
dot1qTunnelPortMode INTEGER
|
|
}
|
|
|
|
dot1qTunnelPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The port identifier."
|
|
::= { dot1qTunnelPortEntry 1 }
|
|
|
|
dot1qTunnelPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
access(2),
|
|
uplink(3),
|
|
uplink-add-pvid(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Tunnel mode controls"
|
|
::= { dot1qTunnelPortEntry 2 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Private VLAN
|
|
---------------------------------------------------------------------------
|
|
privateVlan OBJECT IDENTIFIER ::= { vlan 3 }
|
|
|
|
privateVlanIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrivateVlanIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing per Private VLAN ID information in the device."
|
|
::= { privateVlan 1 }
|
|
|
|
privateVlanIdEntry OBJECT-TYPE
|
|
SYNTAX PrivateVlanIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information controlling Private VLAN ID configuration on the device."
|
|
INDEX { privateVlanId }
|
|
::= { privateVlanIdTable 1 }
|
|
|
|
PrivateVlanIdEntry ::= SEQUENCE {
|
|
privateVlanId INTEGER,
|
|
privateVlanIdType INTEGER
|
|
}
|
|
|
|
privateVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Private VLAN ID."
|
|
::= { privateVlanIdEntry 1 }
|
|
|
|
privateVlanIdType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
community(2),
|
|
isolated(3),
|
|
primary(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Private VLAN ID type controls"
|
|
::= { privateVlanIdEntry 2 }
|
|
|
|
privateVlanPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrivateVlanPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing per Private VLAN Port information in the device."
|
|
::= { privateVlan 2 }
|
|
|
|
privateVlanPortEntry OBJECT-TYPE
|
|
SYNTAX PrivateVlanPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information controlling Private VLAN Port configuration on the device."
|
|
INDEX { privateVlanPortIndex }
|
|
::= { privateVlanPortTable 1 }
|
|
|
|
PrivateVlanPortEntry ::= SEQUENCE {
|
|
privateVlanPortIndex INTEGER,
|
|
privateVlanPortMode INTEGER
|
|
}
|
|
|
|
privateVlanPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Private Port Index."
|
|
::= { privateVlanPortEntry 1 }
|
|
|
|
privateVlanPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
host(2),
|
|
promiscuous(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Private VLAN Port mode controls"
|
|
::= { privateVlanPortEntry 2 }
|
|
|
|
privateVlanHostAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrivateVlanHostAssociationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing per Private VLAN host port association information in the device."
|
|
::= { privateVlan 3 }
|
|
|
|
privateVlanHostAssociationEntry OBJECT-TYPE
|
|
SYNTAX PrivateVlanHostAssociationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information controlling Private VLAN host port association configuration on the device."
|
|
INDEX { privateVlanHostAssociationPortIndex }
|
|
::= { privateVlanHostAssociationTable 1 }
|
|
|
|
PrivateVlanHostAssociationEntry ::= SEQUENCE {
|
|
privateVlanHostAssociationPortIndex INTEGER,
|
|
privateVlanHostAssociationPrimaryVid INTEGER,
|
|
privateVlanHostAssociationSecondaryVid INTEGER
|
|
}
|
|
|
|
privateVlanHostAssociationPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Private Host Port Index."
|
|
::= { privateVlanHostAssociationEntry 1 }
|
|
|
|
privateVlanHostAssociationPrimaryVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Private VLAN host Port association primary VLAN ID. If enter 0 then clear setting."
|
|
::= { privateVlanHostAssociationEntry 2 }
|
|
|
|
privateVlanHostAssociationSecondaryVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Private VLAN host Port association secondary VLAN ID(isolated/community). If enter 0 then clear setting."
|
|
::= { privateVlanHostAssociationEntry 3 }
|
|
|
|
privateVlanMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PrivateVlanMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing per Private VLAN promiscuous port mapping information in the device."
|
|
::= { privateVlan 4 }
|
|
|
|
privateVlanMappingEntry OBJECT-TYPE
|
|
SYNTAX PrivateVlanMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information controlling Private VLAN promiscuous port mapping configuration on the device."
|
|
INDEX { privateVlanMappingPromiscuousPortIndex }
|
|
::= { privateVlanMappingTable 1 }
|
|
|
|
PrivateVlanMappingEntry ::= SEQUENCE {
|
|
privateVlanMappingPromiscuousPortIndex INTEGER,
|
|
privateVlanMappingPrimaryVid INTEGER,
|
|
privateVlanMappingSecondaryVidList DisplayString
|
|
}
|
|
|
|
privateVlanMappingPromiscuousPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Private Promiscuous Port Index."
|
|
::= { privateVlanMappingEntry 1 }
|
|
|
|
privateVlanMappingPrimaryVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Private VLAN promiscuous Port mapping primary VLAN ID. If enter 0 then clear setting."
|
|
::= { privateVlanMappingEntry 2 }
|
|
|
|
privateVlanMappingSecondaryVidList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Private VLAN promiscuous Port mapping secondary VLAN ID list. If enter zero-length string then clear setting."
|
|
::= { privateVlanMappingEntry 3 }
|
|
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Port-based vlan
|
|
---------------------------------------------------------------------------
|
|
--portBasedVlanTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF PortBasedVlanEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "A table containing per port control and status information
|
|
-- for port-based VLAN configuration in the device."
|
|
-- ::= { portBasedVlan 1 }
|
|
--
|
|
--portBasedVlanEntry OBJECT-TYPE
|
|
-- SYNTAX PortBasedVlanEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "Information controlling port-based VLAN configuration for
|
|
-- a port on the device."
|
|
-- INDEX { portIndex }
|
|
-- ::= { portBasedVlanTable 1 }
|
|
--
|
|
--PortBasedVlanEntry ::= SEQUENCE {
|
|
-- portIndex INTEGER,
|
|
-- portPvid INTEGER,
|
|
-- portEgressPortList PortList,
|
|
-- portEgressMode INTEGER
|
|
--}
|
|
--
|
|
--portIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The port identifier."
|
|
-- ::= { portBasedVlanEntry 1 }
|
|
--
|
|
--portPvid OBJECT-TYPE
|
|
-- SYNTAX INTEGER(1..4094)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The default Port VID, the VLAN ID assigned to an untagged
|
|
-- frame or a Priority-Tagged frame received on the port."
|
|
-- REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.1"
|
|
-- DEFVAL { 1 }
|
|
-- ::= { portBasedVlanEntry 2 }
|
|
--
|
|
--portEgressPortList OBJECT-TYPE
|
|
-- SYNTAX PortList
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The ports to which a frame can egress from this port."
|
|
-- ::= { portBasedVlanEntry 3 }
|
|
--
|
|
--portEgressMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- untagged(1),
|
|
-- tagged(2),
|
|
-- unmodified(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "To configure if the frames egress from this port will be
|
|
-- add a 802.1Q vlan tag or not."
|
|
-- DEFVAL { untagged }
|
|
-- ::= { portBasedVlanEntry 4 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- trafficPrioritization
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
qosPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
weighteRoundRobin-8-4-2-1(1),
|
|
strictPriority(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "(1)8,4,2,1 weight round robin scheme: the switch will follow
|
|
8:4:2:1 rate to process priority queue from Hi to lowest queue.
|
|
This approach prevents the lower priotiry packets from being
|
|
starved out with only a slight delay to the higher priority
|
|
packets.
|
|
|
|
(2)Use the strict priority scheme: Queue with higher priority
|
|
will always be process first, while queue with lower priority
|
|
will only be processed when the higher priority queue is empty.
|
|
This approach can cause the lower priorities the be startved
|
|
out preventing them from transmitting any packets, but it
|
|
ensures that all high priority packets serviced as soon as
|
|
possible."
|
|
::= { trafficPrioritization 1 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- port default cos table
|
|
-- -----------------------------------------------------------------------------
|
|
qosPortDefaultCosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPortDefaultCosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
port default cos value."
|
|
::= { trafficPrioritization 2 }
|
|
|
|
qosPortDefaultCosEntry OBJECT-TYPE
|
|
SYNTAX QosPortDefaultCosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing inforamtion
|
|
about port default cos value."
|
|
INDEX { qosPortNum }
|
|
::= { qosPortDefaultCosTable 1 }
|
|
|
|
QosPortDefaultCosEntry ::= SEQUENCE {
|
|
qosPortNum Integer32,
|
|
qosPortTrust Integer32,
|
|
qosPortDefaultCos Integer32
|
|
}
|
|
|
|
qosPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port number."
|
|
::= { qosPortDefaultCosEntry 1 }
|
|
|
|
|
|
qosPortTrust OBJECT-TYPE
|
|
SYNTAX Integer32 {
|
|
cos-only(1),
|
|
dscp-only(2),
|
|
cos-first(3),
|
|
dscp-first(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Two kinds of priority information are token into
|
|
consideration when a packet is processed. One is COS,
|
|
the IEEE 802.3ac tag containing IEEE 802.1p priority
|
|
information, and the other is DSCP, the IPv4 Type of
|
|
Service/DiffServ field.
|
|
(1)COS only: the port priority will only follow the
|
|
COS priority that you have assigned.
|
|
(2)DSCP only: the port priority will only follow the
|
|
DSCP priority that you have assigned.
|
|
(3)COS first: the port priority will follow the COS
|
|
priority first, and then other priority rule.
|
|
(4)DSCP first: the port priority will follow the DSCP
|
|
priority first, and the other priority rule."
|
|
DEFVAL { cos-first }
|
|
::= { qosPortDefaultCosEntry 2 }
|
|
|
|
qosPortDefaultCos OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The port priority will follow the default port priority"
|
|
::= { qosPortDefaultCosEntry 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- COS mapping table
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
qosCOSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosCOSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
COS QOS."
|
|
::= { trafficPrioritization 3 }
|
|
|
|
qosCOSEntry OBJECT-TYPE
|
|
SYNTAX QosCOSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing inforamtion about COS QOS."
|
|
INDEX { qosCOSPriority }
|
|
::= { qosCOSTable 1 }
|
|
|
|
QosCOSEntry ::= SEQUENCE {
|
|
qosCOSPriority Integer32,
|
|
qosCOS INTEGER
|
|
}
|
|
|
|
qosCOSPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "COS priority."
|
|
::= { qosCOSEntry 1 }
|
|
|
|
qosCOS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(0),
|
|
middle(1),
|
|
high(2),
|
|
highest(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The port priority will follow the COS priority
|
|
that you have assigned (0)low, (1)middle, (2)high,
|
|
or (3)highest."
|
|
::= { qosCOSEntry 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- DSCP mapping table
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
qosDscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
|
DSCP QOS."
|
|
::= { trafficPrioritization 4 }
|
|
|
|
qosDscpEntry OBJECT-TYPE
|
|
SYNTAX QosDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing inforamtion
|
|
about DSCP QOS."
|
|
INDEX { qosDscpPriority }
|
|
::= { qosDscpTable 1 }
|
|
|
|
QosDscpEntry ::= SEQUENCE {
|
|
qosDscpPriority Integer32,
|
|
qosDscp INTEGER
|
|
}
|
|
|
|
qosDscpPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dscp priority."
|
|
::= { qosDscpEntry 1 }
|
|
|
|
qosDscp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(0),
|
|
middle(1),
|
|
high(2),
|
|
highest(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The port priority will follow the Dscp priority
|
|
that you have assigned
|
|
(0)low (1)middle, (2)high, (3)highest."
|
|
::= { qosDscpEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- multicastFiltering
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
igmpQuery OBJECT IDENTIFIER ::= { multicastFiltering 1 }
|
|
igmpSnooping OBJECT IDENTIFIER ::= { multicastFiltering 2 }
|
|
unknownMulticast OBJECT IDENTIFIER ::= { multicastFiltering 3 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- IGMP Query
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
igmpQueryVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
version1(1),
|
|
version2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "(1)IGMP Query version 1.
|
|
(2)IGMP Query version 2."
|
|
::= { igmpQuery 1 }
|
|
|
|
igmpQueryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "(1)enable IGMP Query on management vlan.
|
|
(2)disable IGMP Query."
|
|
::= { igmpQuery 2 }
|
|
|
|
igmpQueryInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval between General Queries sent
|
|
by this Querier in seconds."
|
|
DEFVAL { 125 }
|
|
::= { igmpQuery 3 }
|
|
|
|
igmpQueryMaxResponseTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..25)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Max Respocse Time is meaningful only in
|
|
Membership Query messages, and specifies
|
|
the maximum allowed time before sending
|
|
a responding report in seconds."
|
|
DEFVAL { 10 }
|
|
::= { igmpQuery 4 }
|
|
|
|
--igmpQueryStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- auto(1),
|
|
-- enabled(2),
|
|
-- disabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "(1)Detect querier automatically.
|
|
-- (2)Force to be a querier.
|
|
-- (3)Be a silence snooper.
|
|
-- The mode of querier."
|
|
-- ::= { igmpQuery 1 }
|
|
|
|
--igmpQueryTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF IgmpQueryEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "Table of descriptive information about IGMP query."
|
|
-- ::= { igmpQuery 2 }
|
|
|
|
--igmpQueryEntry OBJECT-TYPE
|
|
-- SYNTAX IgmpQueryEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "An entry in the table, containing inforamtion
|
|
-- about IGMP query."
|
|
-- INDEX { igmpQueryEntryVID }
|
|
-- ::= { igmpQueryTable 1 }
|
|
|
|
--IgmpQueryEntry ::= SEQUENCE {
|
|
-- igmpQueryEntryVID INTEGER,
|
|
-- igmpQueryEntryStatus INTEGER
|
|
-- }
|
|
|
|
--igmpQueryEntryVID OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The vlan id where igmp snooping to be configured"
|
|
-- ::= { igmpQueryEntry 1 }
|
|
|
|
--igmpQueryEntryStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- auto(1),
|
|
-- enabled(2),
|
|
-- disabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The state of igmp Query operation on the vlan
|
|
-- (1)Detect querier automatically.
|
|
-- (2)Force to be a querier.
|
|
-- (3)Be a silence snooper.
|
|
-- (1) and (2) indicates that igmp Query is enabled on this
|
|
-- vlan, as long as igmpQueryStatus is also enabled for this
|
|
-- device. When disabled(3) but igmpQueryStatus is still
|
|
-- enabled for the device, igmp Query is disabled on this vlan."
|
|
-- DEFVAL { 1 }
|
|
-- ::= { igmpQueryEntry 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- IGMP Snooping
|
|
-- -----------------------------------------------------------------------------
|
|
igmpSnoopingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
|
|
When enabled, the device will examine IGMP packets and set
|
|
up filters for multicast traffic.
|
|
|
|
The Internet Group Management Protocol (IGMP) is an internal
|
|
protocol of the Internet Protocol (IP) suite. IP manages
|
|
multicast traffic by using switches, routers, and hosts that
|
|
support IGMP. Enabling IGMP makes the device to gather
|
|
multicast group membership information by snooping IGMP
|
|
packets, which helps the device switch IP multicast traffic
|
|
to the ports where group members exist instead of flooding the
|
|
traffic to every ports.
|
|
|
|
IGMP have three fundamental types of message as follows:
|
|
|
|
Message Description
|
|
--------------------------------------------------------------
|
|
Query A message sent from the querier (IGMP router or switch)
|
|
asking for responses from each host belonging to a
|
|
multicast group.
|
|
|
|
Report A message sent by a host to the querier to indicate
|
|
that the host wants to be or is a member of a given
|
|
group indicated in the report message.
|
|
|
|
Leave A message sent by a host to the querier to indicate
|
|
that the host has quit to be a member for a specific
|
|
multicast group.
|
|
|
|
The IGMP snooping functionality is configured on a vlan basis.
|
|
To enable or disable IGMP snooping on vlans:
|
|
1. set igmpSnoopingStatus to enable(1) or disable(2).
|
|
2. specify on which vlan IGMP snooping works by configuring
|
|
each entries in the igmpSnoopingTable.
|
|
|
|
As a result, you can turn on or off IGMP snooping functionality
|
|
by setting igmpSnoopingStatus while keeping the configuration
|
|
for each vlan. Or you can turn on or off IGMP snooping for a
|
|
specific vlan in igmpSnoopingTable with the statuses on other
|
|
vlan untouched."
|
|
::= { igmpSnooping 1 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- igmpSnoopingTable
|
|
-- -----------------------------------------------------------------------------
|
|
igmpSnoopingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpSnoopingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information about on which vlan is IGMP
|
|
snooping enabled."
|
|
::= { igmpSnooping 2 }
|
|
|
|
igmpSnoopingEntry OBJECT-TYPE
|
|
SYNTAX IgmpSnoopingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inforamtion enabling or disabling IGMP snooping on a vlan."
|
|
INDEX { igmpSnoopingEntryVID }
|
|
::= { igmpSnoopingTable 1 }
|
|
|
|
IgmpSnoopingEntry ::= SEQUENCE {
|
|
igmpSnoopingEntryVID INTEGER,
|
|
igmpSnoopingEntryStatus INTEGER
|
|
}
|
|
|
|
igmpSnoopingEntryVID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The vlan id."
|
|
::= { igmpSnoopingEntry 1 }
|
|
|
|
igmpSnoopingEntryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The state of igmp snooping functionality on a vlan.
|
|
Set to enabled(1) indicates that igmp snooping is enabled on
|
|
the vlan. When igmpSnoopingStatus is also turned on, each IGMP
|
|
packets on the vlan will be processed.
|
|
When disabled(2) with igmpSnoopingStatus enabled, igmp packets
|
|
will not be processed and be propagated to other member ports
|
|
of the vlan.
|
|
A transition from disabled(2) to enabled(1) will cause a reset
|
|
of all igmp snooping information on this vlan."
|
|
DEFVAL { 2 }
|
|
::= { igmpSnoopingEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- igmpSnoopingGroupTable
|
|
-- -----------------------------------------------------------------------------
|
|
igmpSnoopingGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpSnoopingGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information about IGMP snooped multicast
|
|
groups."
|
|
::= { igmpSnooping 3 }
|
|
|
|
igmpSnoopingGroupEntry OBJECT-TYPE
|
|
SYNTAX IgmpSnoopingGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information containing a multicast group and its member ports."
|
|
INDEX { igmpSnoopingGroupEntryVID, igmpSnoopingGroupEntryIPAddr }
|
|
::= { igmpSnoopingGroupTable 1 }
|
|
|
|
IgmpSnoopingGroupEntry ::= SEQUENCE {
|
|
igmpSnoopingGroupEntryVID INTEGER,
|
|
igmpSnoopingGroupEntryIPAddr IpAddress,
|
|
igmpSnoopingGroupEntryMembers PortList
|
|
}
|
|
|
|
igmpSnoopingGroupEntryVID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The VLAN ID of an IGMP entry."
|
|
::= { igmpSnoopingGroupEntry 1 }
|
|
|
|
igmpSnoopingGroupEntryIPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The multicast group IP address."
|
|
::= { igmpSnoopingGroupEntry 2 }
|
|
|
|
igmpSnoopingGroupEntryMembers OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The member ports of the group."
|
|
::= { igmpSnoopingGroupEntry 3 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- unknownMulticast
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
unknownMulticastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
source-only-learning(1),
|
|
discard(2),
|
|
flood(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select IGMP Unknown Multicast policy.
|
|
(1) Send to Query Ports: The device sends the packets with
|
|
an unknown MAC/IP Multicast address to query ports
|
|
(2) Discard: The device discards all packets with an unknown
|
|
MAC/IP Multicast address.
|
|
(3) Send to All Ports: The device sends the packets with
|
|
an unknown MAC/IP Multicast address to all ports. "
|
|
DEFVAL { 3 }
|
|
::= { unknownMulticast 1 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- snmp
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- To be available in pharse II
|
|
--snmpAgentMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- v1v2Conly(1),
|
|
-- v3(2),
|
|
-- v1v2Cv3(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The Agent mode of snmp agent.
|
|
-- (1) SNMPV1/V2C Only.
|
|
-- (2) SNMPV3.
|
|
-- (3) SNMPV1/V2C/V3"
|
|
-- ::= { snmp 1 }
|
|
|
|
--snmpSystemName OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(0..64))
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The system name."
|
|
-- ::= { snmp 2 }
|
|
|
|
--snmpSystemLocation OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(0..64))
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The system location."
|
|
-- ::= { snmp 3 }
|
|
|
|
--snmpSystemContact OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(0..64))
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The contact information of system."
|
|
-- ::= { snmp 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- snmpCommunityStringTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
snmpCommunityStringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnmpCommunityStringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of information configuring community strings of
|
|
SNMP agent.
|
|
|
|
An SNMP community string is a text string that acts as
|
|
a password. It is used to authenticate messages that
|
|
are sent between the management station (the SNMP manager)
|
|
and the device (the SNMP agent). The community string is
|
|
included in every packet that is transmitted between the
|
|
SNMP manager and the SNMP agent.
|
|
|
|
After receiving an SNMP request, the SNMP agent compares
|
|
the community string in the request to the community
|
|
strings that are configured for the agent. The requests
|
|
are valid under these circumstances:
|
|
|
|
- Only SNMP Get and Get-next requests are valid if the
|
|
community string in the request matches the read-only
|
|
community.
|
|
|
|
- SNMP Get, Get-next, and Set requests are valid if the
|
|
community string in the request matches the agent's
|
|
read-write community.
|
|
|
|
By default, 'public' is the read-only community and
|
|
'private' is the read-write community. Total 4 community
|
|
strings are allowed to configure in the device."
|
|
::= { snmp 1 }
|
|
|
|
snmpCommunityStringEntry OBJECT-TYPE
|
|
SYNTAX SnmpCommunityStringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inforamtion configuring an community string."
|
|
INDEX { snmpCommunityStringIndex }
|
|
::= { snmpCommunityStringTable 1 }
|
|
|
|
SnmpCommunityStringEntry ::= SEQUENCE {
|
|
snmpCommunityStringIndex Integer32,
|
|
snmpCommunityStringName DisplayString,
|
|
snmpCommunityStringPrivilege INTEGER,
|
|
snmpCommunityStringStatus INTEGER
|
|
}
|
|
|
|
snmpCommunityStringIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of community string."
|
|
::= { snmpCommunityStringEntry 1 }
|
|
|
|
snmpCommunityStringName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A community string with maximum 32 characters."
|
|
::= { snmpCommunityStringEntry 2 }
|
|
|
|
snmpCommunityStringPrivilege OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ro(1),
|
|
rw(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The access privilege of the community string."
|
|
::= { snmpCommunityStringEntry 3 }
|
|
|
|
snmpCommunityStringStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of this entry. Set to (5)createAndWait
|
|
to create a new entry. A new entry or an active
|
|
entry can be edited. Once an entry is modified,
|
|
its status becomes (3)notReady. Set to (1)active
|
|
to apply the modification to the switch. An entry
|
|
can be removed by setting to (6)destory."
|
|
::= { snmpCommunityStringEntry 4 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- snmpV3UserTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
snmpV3UserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnmpV3UserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and information about trap servers.
|
|
A trap server is the recipient of an SNMP trap. The device
|
|
does not send a trap unless it knows to which station it
|
|
should send a trap."
|
|
::= { snmp 2 }
|
|
|
|
snmpV3UserEntry OBJECT-TYPE
|
|
SYNTAX SnmpV3UserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing inforamtion about a
|
|
trap server of SNMP agent."
|
|
INDEX { snmpTrapServerIndex }
|
|
::= { snmpV3UserTable 1 }
|
|
|
|
SnmpV3UserEntry ::= SEQUENCE {
|
|
snmpV3UserIndex Integer32,
|
|
snmpV3UserName DisplayString,
|
|
snmpV3UserSecurityLevel INTEGER,
|
|
snmpV3UserAuthProtocol INTEGER,
|
|
snmpV3UserAuthPassword DisplayString,
|
|
snmpV3UserDesPassword DisplayString,
|
|
snmpV3UserStatus RowStatus
|
|
}
|
|
|
|
snmpV3UserIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of snmp v3 user."
|
|
::= { snmpV3UserEntry 1 }
|
|
|
|
snmpV3UserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { snmpV3UserEntry 2 }
|
|
|
|
snmpV3UserSecurityLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noauth(1),
|
|
auth(2),
|
|
priv(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifiy the authentication and privacy level
|
|
- noauth(1) no authentication and no privacy.
|
|
- auth(2) enables MD5 or SHA packet authentication.
|
|
- priv(3) enables MD5 or SHA packet authentication
|
|
and DES packet encryption."
|
|
::= { snmpV3UserEntry 3 }
|
|
|
|
snmpV3UserAuthProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
md5(2),
|
|
sha(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MD5(Message Digest 5) or SHA (Secure Hash Algorithm)"
|
|
::= { snmpV3UserEntry 4 }
|
|
|
|
snmpV3UserAuthPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { snmpV3UserEntry 5 }
|
|
|
|
snmpV3UserDesPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { snmpV3UserEntry 6 }
|
|
|
|
snmpV3UserStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { snmpV3UserEntry 7 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- snmpTrapServerTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
snmpTrapServerEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable, disable snmp trap functionality.
|
|
|
|
SNMPv1 traps are defined in RFC 1157, and SNMPv2c trap is
|
|
defined as NOTIFICATION. SNMP traps enable this device to
|
|
notify the management station of significant events by way
|
|
of an unsolicited SNMP message. After the manager receives
|
|
the event, the manager displays it and can choose to take
|
|
an action based on the event. For instance, the manager can
|
|
poll the agent directly, or poll other associated device
|
|
agents to get a better understanding of the event."
|
|
::= { snmp 3 }
|
|
|
|
|
|
snmpTrapServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnmpTrapServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and information about trap servers.
|
|
A trap server is the recipient of an SNMP trap. The device
|
|
does not send a trap unless it knows to which station it
|
|
should send a trap."
|
|
::= { snmp 4 }
|
|
|
|
snmpTrapServerEntry OBJECT-TYPE
|
|
SYNTAX SnmpTrapServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing inforamtion about a
|
|
trap server of SNMP agent."
|
|
INDEX { snmpTrapServerIndex }
|
|
::= { snmpTrapServerTable 1 }
|
|
|
|
SnmpTrapServerEntry ::= SEQUENCE {
|
|
snmpTrapServerIndex Integer32,
|
|
snmpTrapServerIPAddr IpAddress,
|
|
snmpTrapServerTrapComm DisplayString,
|
|
snmpTrapServerTrapVer INTEGER,
|
|
snmpTrapServerStatus RowStatus
|
|
}
|
|
|
|
snmpTrapServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of trap server."
|
|
::= { snmpTrapServerEntry 1 }
|
|
|
|
snmpTrapServerIPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Trap Server IP Address."
|
|
::= { snmpTrapServerEntry 2 }
|
|
|
|
snmpTrapServerTrapComm OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The community string of trap server. The password-like string
|
|
will be sent with the notification operation."
|
|
::= { snmpTrapServerEntry 3 }
|
|
|
|
snmpTrapServerTrapVer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v1(1),
|
|
v2c(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The trap version."
|
|
::= { snmpTrapServerEntry 4 }
|
|
|
|
snmpTrapServerStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of this entry. Set to (5)createAndWait
|
|
to create a new entry. A new entry or an active
|
|
entry can be edited. Once an entry is modified,
|
|
its status becomes (3)notReady. Set to (1)active
|
|
to apply the modification to the device. An entry
|
|
can be removed by setting to (6)destory."
|
|
::= { snmpTrapServerEntry 5 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- security
|
|
-- -----------------------------------------------------------------------------
|
|
portSecurity OBJECT IDENTIFIER ::= { security 1 }
|
|
ipSecurity OBJECT IDENTIFIER ::= { security 2 }
|
|
dot1x OBJECT IDENTIFIER ::= { security 3 }
|
|
--macFiltering OBJECT IDENTIFIER ::= { security 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portSecurityStatusTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
portSecurityStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortSecurityStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information about port security status on
|
|
each port.
|
|
|
|
Port security prevents a port from address learning. Only
|
|
those MAC addresses that are configured by management are
|
|
allowed to access the switch or transmit/receive through the
|
|
port. Upto 10 MAC addresses can assigned to each port by adding
|
|
address entries to portSecurityMacTable or macAddrTable.
|
|
|
|
If the port security functionality is enabled but without any
|
|
MAC address configured on a port, no traffic can access the
|
|
switch or transmit/receive from the port."
|
|
::= { portSecurity 1 }
|
|
|
|
portSecurityStatusEntry OBJECT-TYPE
|
|
SYNTAX PortSecurityStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry configuring port security for a port."
|
|
INDEX { portSecurityPortIndex }
|
|
::= { portSecurityStatusTable 1 }
|
|
|
|
PortSecurityStatusEntry ::= SEQUENCE {
|
|
portSecurityPortIndex Integer32,
|
|
portSecurityPortStatus INTEGER
|
|
}
|
|
|
|
portSecurityPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The port id."
|
|
::= { portSecurityStatusEntry 1 }
|
|
|
|
portSecurityPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "(1)enable port security on this port.
|
|
(2)disable port security on this port."
|
|
::= { portSecurityStatusEntry 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portSecurityMacTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
portSecurityMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortSecurityMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table configuring static unicast MAC address for each port.
|
|
|
|
When you add a static MAC address, it remains in the switch's
|
|
address table, regardless of whether the device is physically
|
|
connected to the switch.
|
|
|
|
With enabling port security in portSecurityStatusTable, only
|
|
those MAC addresses configured in portSecurityMacTable are
|
|
allowed to access the switch or transmit/receive through the
|
|
port."
|
|
::= { portSecurity 2 }
|
|
|
|
portSecurityMacEntry OBJECT-TYPE
|
|
SYNTAX PortSecurityMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry configuring a static unicast MAC addresses on a port."
|
|
INDEX { portSecurityMacIndex }
|
|
::= { portSecurityMacTable 1 }
|
|
|
|
PortSecurityMacEntry ::= SEQUENCE {
|
|
portSecurityMacIndex Integer32,
|
|
portSecurityPort Integer32,
|
|
portSecurityVlanIndex Integer32,
|
|
portSecurityMac MacAddress,
|
|
portSecurityMacStatus RowStatus
|
|
}
|
|
|
|
portSecurityMacIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of MAC."
|
|
::= { portSecurityMacEntry 1 }
|
|
|
|
portSecurityPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The port id."
|
|
::= { portSecurityMacEntry 2 }
|
|
|
|
portSecurityVlanIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The vlan id where the MAC address belongs to."
|
|
::= { portSecurityMacEntry 3 }
|
|
|
|
portSecurityMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MAC address of the entry."
|
|
::= { portSecurityMacEntry 4 }
|
|
|
|
portSecurityMacStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of this entry. Set to (5)createAndWait
|
|
to create a new entry. A new entry or an active
|
|
entry can be edited. Once an entry is modified,
|
|
its status becomes (3)notReady. Set to (1)active
|
|
to apply the modification to the device. An entry
|
|
can be removed by setting to (6)destory."
|
|
::= { portSecurityMacEntry 5 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- ipSecurity
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
ipSecurityStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable IP security functionality.
|
|
|
|
IP security allows you to assign specific IP addresses that
|
|
are permitted to access the device for securing switch
|
|
management. Set to (1) to enable IP Security. set to (2) to
|
|
disable IP Security.
|
|
|
|
Enabling IP Security without any entries configured in the
|
|
ipSecurityTable has no effect on the access traffic."
|
|
::= { ipSecurity 1 }
|
|
|
|
ipSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table configuring IP addresses that can access and manage the
|
|
device through network, such as telnet, web or SNMP.
|
|
|
|
Please note that enabling IP security function but without
|
|
adding the IP address of your current management station will
|
|
break current management connection."
|
|
::= { ipSecurity 2 }
|
|
|
|
ipSecurityEntry OBJECT-TYPE
|
|
SYNTAX IpSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry configuring an security IP address."
|
|
INDEX { ipSecurityIndex }
|
|
::= { ipSecurityTable 1 }
|
|
|
|
IpSecurityEntry ::= SEQUENCE {
|
|
ipSecurityIndex Integer32,
|
|
ipSecurityIP IpAddress,
|
|
ipSecurityRowStatus RowStatus
|
|
}
|
|
|
|
ipSecurityIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of IP address entry."
|
|
::= { ipSecurityEntry 1 }
|
|
|
|
ipSecurityIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An IP address that can access and manage the device."
|
|
::= { ipSecurityEntry 2 }
|
|
|
|
ipSecurityRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to manage to creation and deletion of
|
|
a authorized IP address, and is used to indicate the status
|
|
of this entry. A empty entry or an active entry can be edited.
|
|
Once an entry is modified, its status becomes (3)notReady.
|
|
Set to (1)active to apply the modification to the device. An
|
|
entry can be removed by setting to (6)destory."
|
|
::= { ipSecurityEntry 3 }
|
|
|
|
|
|
--ipSecurityIP1 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 2 }
|
|
|
|
--ipSecurityIP2 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 3 }
|
|
|
|
--ipSecurityIP3 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 4 }
|
|
|
|
--ipSecurityIP4 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 5 }
|
|
|
|
--ipSecurityIP5 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 6 }
|
|
|
|
--ipSecurityIP6 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 7 }
|
|
|
|
--ipSecurityIP7 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 8 }
|
|
|
|
--ipSecurityIP8 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 9 }
|
|
|
|
--ipSecurityIP9 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 10 }
|
|
|
|
--ipSecurityIP10 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
|
-- ::= { ipSecurity 11 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- macFilteringTable, NOT SUPPORT
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
--macFilteringTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF MACFilteringEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "Table of descriptive information about
|
|
-- MAC filter configuration.
|
|
-- MAC address filtering allows the switch to drop
|
|
-- unwanted traffic. Traffic is filtered based on
|
|
-- the destination addresses. For example, if your
|
|
-- network is congested because of high utilization
|
|
-- from one MAC address, you can filter all traffic
|
|
-- transmitted to that MAC address, restoring network
|
|
-- flow while you troubleshoot the problem."
|
|
-- ::= { macFiltering 1}
|
|
--
|
|
--macFilteringEntry OBJECT-TYPE
|
|
-- SYNTAX MACFilteringEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "An entry in the table, containing inforamtion
|
|
-- about MAC filter configuration."
|
|
-- INDEX { macFilteringIndex }
|
|
-- ::= { macFilteringTable 1 }
|
|
--
|
|
--MACFilteringEntry ::= SEQUENCE
|
|
--{
|
|
-- macFilteringIndex Integer32,
|
|
-- macFilteringAddr MacAddress,
|
|
-- macFilteringStatus INTEGER
|
|
--}
|
|
--
|
|
--macFilteringIndex OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "Index of MAC."
|
|
-- ::= { macFilteringEntry 1 }
|
|
--
|
|
--macFilteringAddr OBJECT-TYPE
|
|
-- SYNTAX MacAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "MAC address of the entry."
|
|
-- ::= { macFilteringEntry 2 }
|
|
--
|
|
--macFilteringStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- valid(1),
|
|
-- creatrequest(2),
|
|
-- undercreation(3),
|
|
-- invalid(4)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION "The status of this entry. If this object is not equal to valid(1), all associated
|
|
-- MAC entries shall be deleted by the agent."
|
|
-- ::= { macFilteringEntry 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- dot1x
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
dot1xStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IEEE802.1x protocol function status.
|
|
(1) IEEE802.1x protocol function is enabled.
|
|
(2) IEEE802.1x protocol function is disabled.
|
|
802.1x makes use of the physical access characteristics
|
|
of IEEE802 LAN infrastructures in order to provide a
|
|
means of authenticating and authorizing devices attached
|
|
to a LAN port that has point-to-point connection
|
|
characteristics, and of preventing access to that port
|
|
in cases in which the authentication and authorization
|
|
process fails."
|
|
::= { dot1x 1 }
|
|
|
|
dot1xAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
radius(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1x 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- radiusServerTable
|
|
-- -----------------------------------------------------------------------------
|
|
radiusServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RadiusServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1x 3 }
|
|
|
|
radiusServerEntry OBJECT-TYPE
|
|
SYNTAX RadiusServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { radiusServerIndex }
|
|
::= { radiusServerTable 1 }
|
|
|
|
RadiusServerEntry ::= SEQUENCE {
|
|
radiusServerIndex Integer32,
|
|
radiusServerIp IpAddress,
|
|
radiusServerServerPort Integer32,
|
|
radiusServerAccountingPort Integer32,
|
|
radiusServerSharedKey DisplayString
|
|
-- radiusServerStatus RowStatus
|
|
}
|
|
|
|
radiusServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of Radius server configuration."
|
|
::= { radiusServerEntry 1 }
|
|
|
|
radiusServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP address of this radius server."
|
|
::= { radiusServerEntry 2 }
|
|
|
|
radiusServerServerPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The UDP port number used by the authentication server
|
|
to authenticate."
|
|
::= { radiusServerEntry 3 }
|
|
|
|
radiusServerAccountingPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Accounting Port: The UDP port number used by the authentication
|
|
server to retrieve accounting information."
|
|
::= { radiusServerEntry 4 }
|
|
|
|
radiusServerSharedKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A key shared between this switch and authentication server."
|
|
::= { radiusServerEntry 5 }
|
|
|
|
--radiusServerStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION "."
|
|
-- ::= { radiusServerEntry 6 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- dot1xLocalUserTable
|
|
-- -----------------------------------------------------------------------------
|
|
dot1xLocalUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1xLocalUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1x 4 }
|
|
|
|
dot1xLocalUserEntry OBJECT-TYPE
|
|
SYNTAX Dot1xLocalUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { dot1xLocalUserIndex }
|
|
::= { dot1xLocalUserTable 1 }
|
|
|
|
Dot1xLocalUserEntry ::= SEQUENCE {
|
|
dot1xLocalUserIndex Integer32,
|
|
dot1xLocalUserName DisplayString,
|
|
dot1xLocalUserPassword DisplayString,
|
|
dot1xLocalUserVid Integer32
|
|
--dot1xLocalUserStatus RowStatus
|
|
}
|
|
|
|
dot1xLocalUserIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xLocalUserEntry 1 }
|
|
|
|
dot1xLocalUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "set this field to empty to remove this user config."
|
|
::= { dot1xLocalUserEntry 2 }
|
|
|
|
dot1xLocalUserPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xLocalUserEntry 3 }
|
|
|
|
dot1xLocalUserVid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xLocalUserEntry 4 }
|
|
|
|
--dot1xLocalUserStatus OBJECT-TYPE
|
|
--SYNTAX RowStatus
|
|
--MAX-ACCESS read-create
|
|
--STATUS current
|
|
--DESCRIPTION "."
|
|
--::= { dot1xLocalUserEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- dot1xPortConfigTable
|
|
-- -----------------------------------------------------------------------------
|
|
dot1xPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1xPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1x 5 }
|
|
|
|
dot1xPortConfigEntry OBJECT-TYPE
|
|
SYNTAX Dot1xPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { dot1xPortConfigIndex }
|
|
::= { dot1xPortConfigTable 1 }
|
|
|
|
Dot1xPortConfigEntry ::= SEQUENCE {
|
|
dot1xPortConfigIndex Integer32,
|
|
dot1xPortAuthControl INTEGER,
|
|
dot1xPortReauthentication INTEGER,
|
|
dot1xPortMaxRequest INTEGER,
|
|
dot1xPortGuestVlan INTEGER,
|
|
dot1xPortHostMode INTEGER,
|
|
dot1xPortAdminDirection INTEGER,
|
|
dot1xPortConfigSetDefault INTEGER,
|
|
dot1xPortReinitialize INTEGER,
|
|
dot1xPortClientReauth INTEGER
|
|
}
|
|
|
|
dot1xPortConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 1 }
|
|
|
|
dot1xPortAuthControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
forceAuthorized(2),
|
|
forceUnauthorized(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 2 }
|
|
|
|
dot1xPortReauthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 3 }
|
|
|
|
dot1xPortMaxRequest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 4 }
|
|
|
|
dot1xPortGuestVlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 5 }
|
|
|
|
dot1xPortHostMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
single(1),
|
|
multiple(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 6 }
|
|
|
|
dot1xPortAdminDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
both(1),
|
|
in(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 7 }
|
|
|
|
dot1xPortConfigSetDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
apply(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 8 }
|
|
|
|
dot1xPortReinitialize OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
apply(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 9 }
|
|
|
|
dot1xPortClientReauth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
apply(1)
|
|
}
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortConfigEntry 10 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- dot1xPortTimeoutConfigTable
|
|
-- -----------------------------------------------------------------------------
|
|
dot1xPortTimeoutConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1xPortTimeoutConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1x 6 }
|
|
|
|
dot1xPortTimeoutConfigEntry OBJECT-TYPE
|
|
SYNTAX Dot1xPortTimeoutConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { dot1xPortTimeoutIndex }
|
|
::= { dot1xPortTimeoutConfigTable 1 }
|
|
|
|
Dot1xPortTimeoutConfigEntry ::= SEQUENCE {
|
|
dot1xPortTimeoutIndex Integer32,
|
|
dot1xPortReauthPeriod Integer32,
|
|
dot1xPortQuietPeriod Integer32,
|
|
dot1xPortTxPeriod Integer32,
|
|
dot1xPortSupplicantTimeout Integer32,
|
|
dot1xPortServerTimeout Integer32
|
|
}
|
|
|
|
dot1xPortTimeoutIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortTimeoutConfigEntry 1 }
|
|
|
|
dot1xPortReauthPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortTimeoutConfigEntry 2 }
|
|
|
|
dot1xPortQuietPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortTimeoutConfigEntry 3 }
|
|
|
|
dot1xPortTxPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortTimeoutConfigEntry 4 }
|
|
|
|
dot1xPortSupplicantTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortTimeoutConfigEntry 5 }
|
|
|
|
dot1xPortServerTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortTimeoutConfigEntry 6 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- dot1xPortStatusTable
|
|
-- -----------------------------------------------------------------------------
|
|
dot1xPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1xPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1x 7 }
|
|
|
|
dot1xPortStatusEntry OBJECT-TYPE
|
|
SYNTAX Dot1xPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { dot1xPortStatusIndex }
|
|
::= { dot1xPortStatusTable 1 }
|
|
|
|
Dot1xPortStatusEntry ::= SEQUENCE {
|
|
dot1xPortStatusIndex Integer32,
|
|
dot1xPortCtrl INTEGER,
|
|
dot1xPortAuthStatus INTEGER,
|
|
dot1xPortAuthSupplicant MacAddress,
|
|
dot1xPortOperDirection INTEGER
|
|
}
|
|
|
|
dot1xPortStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortStatusEntry 1 }
|
|
|
|
dot1xPortCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
forceAuthorized(2),
|
|
forceUnauthorized(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortStatusEntry 2 }
|
|
|
|
dot1xPortAuthStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
authorized(1),
|
|
unauthorized(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortStatusEntry 3 }
|
|
|
|
dot1xPortAuthSupplicant OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortStatusEntry 4 }
|
|
|
|
dot1xPortOperDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
both(1),
|
|
in(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { dot1xPortStatusEntry 5 }
|
|
|
|
|
|
--radiusServerSetting OBJECT IDENTIFIER ::= { ieee8021x 1 }
|
|
--portAuthConfiguration OBJECT IDENTIFIER ::= { ieee8021x 2 }
|
|
|
|
--radius8021xProtocolStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- enabled(1),
|
|
-- disabled(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "IEEE802.1x protocol function status.
|
|
-- (1) IEEE802.1x protocol function is enabled.
|
|
-- (2) IEEE802.1x protocol function is disabled.
|
|
-- 802.1x makes use of the physical access characteristics
|
|
-- of IEEE802 LAN infrastructures in order to provide a
|
|
-- means of authenticating and authorizing devices attached
|
|
-- to a LAN port that has point-to-point connection
|
|
-- characteristics, and of preventing access to that port
|
|
-- in cases in which the authentication and authorization
|
|
-- process fails."
|
|
-- ::= { radiusServerSetting 1 }
|
|
|
|
--radiusServerIP OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Radius Server IP Address: the ip address of the authentication server."
|
|
-- ::= { radiusServerSetting 2 }
|
|
|
|
--radiusServerPort OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Server Port: The UDP port number used by the authentication server to authenticate."
|
|
-- ::= { radiusServerSetting 3 }
|
|
--
|
|
--radiusAccountingPort OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Accounting Port: The UDP port number used by the authentication server to retrieve
|
|
-- accounting information. "
|
|
-- ::= { radiusServerSetting 4 }
|
|
--
|
|
--radiusSharedKey OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(0..30))
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Shared Key: A key shared between this switch and authentication server."
|
|
-- ::= { radiusServerSetting 5 }
|
|
--
|
|
--radiusNASIdentifier OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(0..30))
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "NAS Identifier: A string used to identify this switch."
|
|
-- ::= { radiusServerSetting 6 }
|
|
--
|
|
--radiusMiscQuietPeriod OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Quiet Period: used to define periods of time during
|
|
-- which it will not attempt to acquire a supplicant
|
|
-- (Default time is 60 seconds)."
|
|
-- ::= { radiusServerSetting 7 }
|
|
--
|
|
--radiusMiscTxPeriod OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Tx Period: used to determine when an EAPOL PDU is to
|
|
-- be transmitted(Default value is 30 seconds)."
|
|
-- ::= { radiusServerSetting 8 }
|
|
--
|
|
--radiusMiscSupplicantTimeout OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Supplicant Timeout: used to determine timeout conditions
|
|
-- in the exchanges between the supplicant and
|
|
-- authentication server(Default value is 30 seconds)."
|
|
-- ::= { radiusServerSetting 9 }
|
|
--
|
|
--radiusMiscServerTimeout OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Server Timeout: used to determine timeout conditions
|
|
-- in the exchanges between the authenticator and
|
|
-- authentication server(Default value is 30 seconds)."
|
|
-- ::= { radiusServerSetting 10}
|
|
--
|
|
--radiusMiscReAuthMax OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "ReAuthMax: used to determine the number of
|
|
-- reauthentication attempts that are permitted
|
|
-- before the specific port becomes unauthorized
|
|
-- (Default value is 2 times)."
|
|
-- ::= { radiusServerSetting 11}
|
|
--
|
|
--radiusMiscReauthPeriod OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Reauth Period: used to determine a nonzero number
|
|
-- of seconds between periodic reauthentication of
|
|
-- the supplications(Default value is 3600 seconds)."
|
|
-- ::= { radiusServerSetting 12}
|
|
--
|
|
--radiusPerPortCfgTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF RadiusPerPortCfgEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "Table of descriptive information and configuration about
|
|
-- Radius per port configuration."
|
|
-- ::= { portAuthConfiguration 1}
|
|
--
|
|
--radiusPerPortCfgEntry OBJECT-TYPE
|
|
-- SYNTAX RadiusPerPortCfgEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "An entry in the table, containing inforamtion
|
|
-- about Radius per port configuration."
|
|
-- INDEX { radiusPerPortCfgIndex }
|
|
-- ::= { radiusPerPortCfgTable 1 }
|
|
--
|
|
--RadiusPerPortCfgEntry ::= SEQUENCE
|
|
--{
|
|
-- radiusPerPortCfgIndex Integer32,
|
|
-- radiusPerPortCfgPortName DisplayString,
|
|
-- radiusPerPortCfgState INTEGER
|
|
--}
|
|
--
|
|
--radiusPerPortCfgIndex OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "Index of port."
|
|
-- ::= { radiusPerPortCfgEntry 1 }
|
|
--
|
|
--radiusPerPortCfgPortName OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(0..16))
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "The name of port."
|
|
-- ::= { radiusPerPortCfgEntry 2 }
|
|
--
|
|
--radiusPerPortCfgState OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- reject(1),
|
|
-- accept(2),
|
|
-- authorize(3),
|
|
-- disabled(4)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "You can select the specific port and configure the
|
|
-- authorization state. Each port can select four kinds
|
|
-- of authorization state :
|
|
-- Reject: force the specific port to be unauthorized.
|
|
-- Accept: force the specific port to be authorized.
|
|
-- Authorize: the state of the specific port was determinied by
|
|
-- the outcome of the authentication.
|
|
-- Disable: the specific port didn't support 802.1x function."
|
|
-- ::= { radiusPerPortCfgEntry 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Warning
|
|
-- -----------------------------------------------------------------------------
|
|
faultRelay OBJECT IDENTIFIER ::= { warning 1 }
|
|
eventAndEmailWarning OBJECT IDENTIFIER ::= { warning 2 }
|
|
hardwareStatus OBJECT IDENTIFIER ::= { warning 3 }
|
|
|
|
eventSelection OBJECT IDENTIFIER ::= { eventAndEmailWarning 1 }
|
|
sysLogConfiguration OBJECT IDENTIFIER ::= { eventAndEmailWarning 2 }
|
|
smtpConfiguration OBJECT IDENTIFIER ::= { eventAndEmailWarning 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Fault Relay
|
|
-- -----------------------------------------------------------------------------
|
|
faultRelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FaultRelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of configuration about fault relay.
|
|
|
|
A fault relay is able to control an output circuit which is
|
|
triggered by management defined fault events. There are two
|
|
fault relays in the device, each is controlled by an
|
|
faultRelayEntry in this table.
|
|
|
|
To configure a fault relay, first select the type of fault
|
|
event which will trigger the relay in faultSelection, and
|
|
then configure the related column.
|
|
|
|
Set faultRelayEntryStatus to active(1) to set the configuration
|
|
to the device."
|
|
::= { faultRelay 1 }
|
|
|
|
faultRelayEntry OBJECT-TYPE
|
|
SYNTAX FaultRelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A entry controlling a fault relay configuration."
|
|
INDEX { faultRelayId }
|
|
::= { faultRelayTable 1 }
|
|
|
|
FaultRelayEntry ::= SEQUENCE {
|
|
faultRelayId INTEGER,
|
|
faultSelection INTEGER,
|
|
diConfig INTEGER,
|
|
dryOutputOnPeriodConfig INTEGER,
|
|
dryOutputOffPeriodConfig INTEGER,
|
|
powerFailureConfig INTEGER,
|
|
linkFailureConfig PortList,
|
|
pingFailureIP IpAddress,
|
|
pingResetTime INTEGER,
|
|
pingHoldTime INTEGER,
|
|
faultRelayEntryStatus INTEGER
|
|
}
|
|
|
|
faultRelayId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
relay1(1),
|
|
relay2(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index of fault relay."
|
|
::= { faultRelayEntry 1 }
|
|
|
|
faultSelection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
diState(1),
|
|
dryOutput(2),
|
|
powerFailure(3),
|
|
linkFailure(4),
|
|
pingFailure(5),
|
|
superRingFailure(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select the type of fault event that triggers the relay.
|
|
To config a fault relay, first select the founction this
|
|
relay serves for, then configure the condition that
|
|
triggers the relay in detail. At last, set the
|
|
faultRelayEntryStatus to active(1) or nonActive(3) to
|
|
enable or disable the setting on the relay."
|
|
::= { faultRelayEntry 2 }
|
|
|
|
diConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
di1Low(1),
|
|
di1High(2),
|
|
di2Low(3),
|
|
di2High(4),
|
|
disable(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The fault relay will be triggered if digital input is low
|
|
or high."
|
|
::= { faultRelayEntry 3 }
|
|
|
|
dryOutputOnPeriodConfig OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The fault relay will be closed after a period (in seconds).
|
|
Together with dryOutputOffPeriodConfig, the fault relay can
|
|
be configured to continue on and off."
|
|
::= { faultRelayEntry 4 }
|
|
|
|
dryOutputOffPeriodConfig OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The fault relay will be opened after a period (in seconds).
|
|
Together with dryOutputOnPeriodConfig, the fault relay can
|
|
be configured to continue on and off."
|
|
::= { faultRelayEntry 5 }
|
|
|
|
|
|
powerFailureConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
power1(1),
|
|
power2(2),
|
|
any(255),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The fault relay will be triggered if the configured
|
|
power fails. Any means either power 1 or power2 fails"
|
|
::= { faultRelayEntry 6 }
|
|
|
|
linkFailureConfig OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The fault relay will be trigger if any of the configured
|
|
links fails."
|
|
::= { faultRelayEntry 7 }
|
|
|
|
pingFailureIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The fault relay will be trigger if fail to ping the assigned
|
|
IP address."
|
|
::= { faultRelayEntry 8 }
|
|
|
|
pingResetTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Reset the ping process after pingResetTime, and then wait
|
|
pingHoldTime to ping again. (optional)"
|
|
::= { faultRelayEntry 9 }
|
|
|
|
pingHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Reset the ping process after pingResetTime, and then wait
|
|
pingHoldTime to ping again. (optional)"
|
|
::= { faultRelayEntry 10 }
|
|
|
|
faultRelayEntryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
configuring(2),
|
|
notActive(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object to active(1) to save the configuration
|
|
to the device. Setting this object to notActive(3) disable
|
|
the configuration.
|
|
|
|
The system returns active(1) or notActive when the settings
|
|
of the entry is enabled or disabled on the relay. And the
|
|
status becomes configuring(2) when the settings of the entry
|
|
are modified and not set to active(1) yet."
|
|
::= { faultRelayEntry 11 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- System Event Table
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
systemEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SystemEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and controls the reactions
|
|
to system events.
|
|
|
|
Three types of reactions will be triggered: (1)logging in the
|
|
switch or send logs to remote syslog servers, (2)sending an
|
|
email, or (3)send an snmp trap. Each type of alert is configured
|
|
in sysLogConfiguration, smtpConfiguration, snmpTrapServerEnable
|
|
and snmpTrapServerTable."
|
|
::= { eventSelection 1 }
|
|
|
|
systemEventEntry OBJECT-TYPE
|
|
SYNTAX SystemEventEntry
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An entry containing type of system events."
|
|
INDEX { eventSystemEventIndex }
|
|
::= { systemEventTable 1 }
|
|
|
|
SystemEventEntry ::= SEQUENCE {
|
|
eventSystemEventIndex Integer32,
|
|
eventDeviceColdStartEvent AlertType,
|
|
eventDeviceWarmStartEvent AlertType,
|
|
eventAuthenticationFailureEvent AlertType,
|
|
eventRingEvent AlertType,
|
|
eventPower1FailureEvent AlertType,
|
|
eventPower2FailureEvent AlertType,
|
|
eventFaultRelayEvent AlertType,
|
|
eventTimeSynchronizeEvent AlertType,
|
|
eventSFPEvent AlertType,
|
|
eventDI1ChangeEvent AlertType,
|
|
eventDI2ChangeEvent AlertType,
|
|
eventLoopDetectionEvent AlertType,
|
|
}
|
|
|
|
eventSystemEventIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of events."
|
|
::= { systemEventEntry 1 }
|
|
|
|
eventDeviceColdStartEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when the device
|
|
cold starts."
|
|
-- DESCRIPTION "Parameter to indicate the event should be logged or should be
|
|
-- sent as an Email alert.
|
|
-- The value can't be log(1) or logandsmtp(3), if syslogStatus
|
|
-- is disabled. The value can't be smtp(2) or logandsmtp(3), if
|
|
-- eventEmailAlertStatus is disabled."
|
|
::= { systemEventEntry 2 }
|
|
|
|
eventDeviceWarmStartEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when the device
|
|
warm starts."
|
|
::= { systemEventEntry 3 }
|
|
|
|
eventAuthenticationFailureEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when
|
|
authentication failure."
|
|
::= { systemEventEntry 4 }
|
|
|
|
eventRingEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when ring
|
|
event occured."
|
|
::= { systemEventEntry 5 }
|
|
|
|
eventPower1FailureEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when power1
|
|
failure."
|
|
::= { systemEventEntry 6 }
|
|
|
|
eventPower2FailureEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when power2
|
|
failure."
|
|
::= { systemEventEntry 7 }
|
|
|
|
eventFaultRelayEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when a fault
|
|
relay is triggered."
|
|
::= { systemEventEntry 8 }
|
|
|
|
eventTimeSynchronizeEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when time
|
|
synchronizatonn failed."
|
|
::= { systemEventEntry 9 }
|
|
|
|
eventSFPEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when SFP
|
|
event occured."
|
|
::= { systemEventEntry 10 }
|
|
|
|
eventDI1ChangeEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when DI1
|
|
changed ."
|
|
::= { systemEventEntry 11 }
|
|
|
|
eventDI2ChangeEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when DI2
|
|
changed ."
|
|
::= { systemEventEntry 12 }
|
|
|
|
eventLoopDetectionEvent OBJECT-TYPE
|
|
SYNTAX AlertType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select which warning machanism to take place when loop detection
|
|
event occured."
|
|
::= { systemEventEntry 13 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Port Event Table
|
|
-- -----------------------------------------------------------------------------
|
|
portEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and controls the reactions
|
|
to port link up, link down, or both link up and down.
|
|
|
|
Three types of reactions will be triggered: (1)logging in the
|
|
switch or send logs to remote syslog servers, (2)sending an
|
|
email, or (3)send an snmp trap. Each type of alert is configured
|
|
in sysLogConfiguration, smtpConfiguration, snmpTrapServerEnable
|
|
and snmpTrapServerTable."
|
|
::= { eventSelection 2 }
|
|
|
|
portEventEntry OBJECT-TYPE
|
|
SYNTAX PortEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry controlling the type of port events."
|
|
INDEX { eventPortNumber }
|
|
::= { portEventTable 1 }
|
|
|
|
PortEventEntry ::= SEQUENCE {
|
|
eventPortNumber Integer32,
|
|
eventPortEvent INTEGER
|
|
}
|
|
|
|
eventPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port number."
|
|
::= {portEventEntry 1 }
|
|
|
|
eventPortEvent OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
linkup(1),
|
|
linkdown(2),
|
|
linkupandlinkdown(3),
|
|
disabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select the port event to react to."
|
|
::= { portEventEntry 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- System Log
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
sysLogLocalStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Parameter to configure if the log should to be kept in the
|
|
device or not."
|
|
::= { sysLogConfiguration 1 }
|
|
|
|
sysLogRemoteStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Parameter to configure the log should be sent to a syslog
|
|
server specified in sysLogServerAddr or not. When disabled
|
|
or sysLogServerAddr is 0, the device will not send out or
|
|
record any log."
|
|
::= { sysLogConfiguration 2 }
|
|
|
|
sysLogServerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of syslog server."
|
|
::= { sysLogConfiguration 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Email Alert
|
|
-- -----------------------------------------------------------------------------
|
|
eventEmailAlertStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Parameter to enable the email alert feature, When enabled,
|
|
the switch will send an email to the address presented in
|
|
emailAlertRcptTable."
|
|
::= { smtpConfiguration 1 }
|
|
|
|
eventEmailAlertServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of SMTP server. It can't be modified when
|
|
eventEmailAlertStatus is disabled."
|
|
::= { smtpConfiguration 2 }
|
|
|
|
eventEmailAlertAccount OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..70))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The email account for SMTP server. It can't be modified when
|
|
eventEmailAlertAuthentication is disabled."
|
|
::= { smtpConfiguration 3 }
|
|
|
|
eventEmailAlertAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set to (1)enabled if it needs authentication to connect to
|
|
the SMTP server. It can't be modified when
|
|
eventEmailAlertStatus is disabled."
|
|
::= { smtpConfiguration 4 }
|
|
|
|
eventEmailAlertUser OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..70))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The email account for SMTP server. It can't be modified when
|
|
eventEmailAlertAuthentication is disabled."
|
|
::= { smtpConfiguration 5 }
|
|
|
|
eventEmailAlertPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..36))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION "The password of email account. It can't be modified when
|
|
eventEmailAlertAuthentication is disabled."
|
|
::= { smtpConfiguration 6 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- emailAlertReptTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
emailAlertRcptTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EmailAlertRcptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table configuring recipient email addresses."
|
|
::= { smtpConfiguration 7 }
|
|
|
|
emailAlertRcptEntry OBJECT-TYPE
|
|
SYNTAX EmailAlertRcptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing recipient email address."
|
|
INDEX { eventEmailAlertRcptIndex }
|
|
::= { emailAlertRcptTable 1 }
|
|
|
|
EmailAlertRcptEntry ::= SEQUENCE {
|
|
eventEmailAlertRcptIndex Integer32,
|
|
eventEmailAlertRcptEmailAddr DisplayString
|
|
}
|
|
|
|
eventEmailAlertRcptIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of recipient Email address."
|
|
::= { emailAlertRcptEntry 1 }
|
|
|
|
eventEmailAlertRcptEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..48))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A recipient email address."
|
|
::= { emailAlertRcptEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Hardware Status Table
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
hardwareStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HardwareStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { hardwareStatus 1 }
|
|
|
|
hardwareStatusEntry OBJECT-TYPE
|
|
SYNTAX HardwareStatusEntry
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { ledHardwareStatusIndex }
|
|
::= { hardwareStatusTable 1 }
|
|
|
|
HardwareStatusEntry ::= SEQUENCE {
|
|
ledHardwareStatusIndex Integer32,
|
|
ledPower1Status INTEGER,
|
|
ledPower2Status INTEGER,
|
|
ledDO1Status INTEGER,
|
|
ledDO2Status INTEGER,
|
|
ledDI1Status INTEGER,
|
|
ledDI2Status INTEGER,
|
|
ledRMStatus INTEGER
|
|
}
|
|
|
|
ledHardwareStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of leds."
|
|
::= { hardwareStatusEntry 1 }
|
|
|
|
ledPower1Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { hardwareStatusEntry 2 }
|
|
|
|
ledPower2Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { hardwareStatusEntry 3 }
|
|
|
|
ledDO1Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { hardwareStatusEntry 4 }
|
|
|
|
ledDO2Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { hardwareStatusEntry 5 }
|
|
|
|
ledDI1Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { hardwareStatusEntry 6 }
|
|
|
|
ledDI2Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { hardwareStatusEntry 7 }
|
|
|
|
ledRMStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { hardwareStatusEntry 8 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Monitor and Diag
|
|
-- -----------------------------------------------------------------------------
|
|
macAddressTable OBJECT IDENTIFIER ::= { monitorandDiag 1 }
|
|
portStatistic OBJECT IDENTIFIER ::= { monitorandDiag 2 }
|
|
portmirroring OBJECT IDENTIFIER ::= { monitorandDiag 3 }
|
|
eventLog OBJECT IDENTIFIER ::= { monitorandDiag 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- macAddressTable
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
macAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MACAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information about unicast or multicast
|
|
MAC addresses that currently learned, configured by management
|
|
or IGMP snooping."
|
|
::= { macAddressTable 1 }
|
|
|
|
macAddrEntry OBJECT-TYPE
|
|
SYNTAX MACAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing inforamtion about a MAC address entry."
|
|
INDEX { macAddressAddr }
|
|
::= { macAddrTable 1 }
|
|
|
|
MACAddrEntry ::= SEQUENCE {
|
|
macAddressAddr MacAddress,
|
|
macAddressType INTEGER,
|
|
macAddressPortList PortList,
|
|
macAddressVlanId Integer32,
|
|
macAddressStatus INTEGER
|
|
}
|
|
|
|
macAddressAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MAC address of the entry."
|
|
::= { macAddrEntry 1 }
|
|
|
|
macAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamicUnicast(1),
|
|
staticUnicast(2),
|
|
managementUnicast(3),
|
|
dynamicMulticast(4),
|
|
staticMulticast(5),
|
|
managementMulticast(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of this entry.
|
|
dynamicUnicast(1) - unicast address that learned from source
|
|
address of ingress frames.
|
|
staticUnicast(2) - unicast address that configured by management
|
|
and will remain so after the next reset of the device. Upto
|
|
10 static unicast entries can be configured for each port.
|
|
managementUnicast(3) - unicast address that configured for
|
|
management purpose or the MAC address of the device itself.
|
|
Management unicast entries are read-only.
|
|
dynamicMulticast(4) - dynamic multicast address that configured
|
|
by IGMP snooping. These entries are read-only.
|
|
staticMulticast(5) - multicast address that configured by
|
|
management and will remain so after the next reset of the
|
|
device.
|
|
-- Upto 10 static multicast entries can be configured.
|
|
managementMulticast(6) - multicast address that configured for
|
|
management purpose, such as GVRP and so on. These entries
|
|
are read-only.
|
|
Management entries are read-only. Dynamic entries can be read
|
|
and delete. Only static entries are read-create.
|
|
"
|
|
::= { macAddrEntry 2 }
|
|
|
|
macAddressPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The port list, which must be valid when creating a new entry."
|
|
::= { macAddrEntry 3 }
|
|
|
|
macAddressVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VLAN where the mac address learned from or configured to."
|
|
::= { macAddrEntry 4 }
|
|
|
|
macAddressStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to manage to creation and deletion of
|
|
a static entry, and is used to indicate the status of an entry.
|
|
|
|
To Creating a static entry, select a unused value of
|
|
macAddressIndex and set macAddressStatus to 'createAndWait'.
|
|
A row will then be created with status set to 'notReady' and
|
|
its macAddressType, macAddressPortList and macAddressVlanId
|
|
left unspecified.
|
|
|
|
macAddressType, macAddressPortList and macAddressVlanId are
|
|
mandatory to activate an entry to the device. macAddressStatus
|
|
remains 'notReady' if any of these three objects are invalid.
|
|
macAddressStatus will be changed to 'notInService' when the
|
|
three objects are correctly configured. Set macAddressStatus
|
|
to 'active' to activate the MAC entry to the device.
|
|
|
|
Static unicast and multicast entries and dynamic unicast entries
|
|
are removable. To delete a MAC entry, select the macAddressIndex
|
|
set macAddressStatus to 'destory'. The row and the corresponding
|
|
MAC address configurarion will be removed from the device.
|
|
|
|
Set macAddressStatus to 'createAndGo', 'notInService', 'notReady'
|
|
have no effects."
|
|
::= { macAddrEntry 5 }
|
|
|
|
macAddrTableClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set to clear for cleaning all the dynamic MAC entries in the
|
|
MAC address table."
|
|
::= { macAddressTable 2 }
|
|
|
|
|
|
macAddrTableAgingTime OBJECT-TYPE
|
|
SYNTAX INTEGER(0..3825)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value determines the interval that an automatic learned
|
|
MAC address entry remains valid in the forwarding database,
|
|
since its last access as a source address, before being purged.
|
|
The value should be times of 15 in seconds. The minimum age
|
|
time is 15 seconds. The maximum age time is 3825 seconds or
|
|
almost 64 minutes. if the value is set to 0, the aging function
|
|
is disabled and all learned address will remain in the database
|
|
forever."
|
|
DEFVAL { 300 }
|
|
::= { macAddressTable 3 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portStatistic
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
switchPortStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwitchPortStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and statistics information about each
|
|
switch ports."
|
|
::= { portStatistic 1 }
|
|
|
|
|
|
switchPortStatClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION "Set to clear(1) to clear all information in the statistics
|
|
table."
|
|
::= { portStatistic 2 }
|
|
|
|
|
|
switchPortStatEntry OBJECT-TYPE
|
|
SYNTAX SwitchPortStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table containing descriptive information
|
|
and statistics of a port."
|
|
INDEX { swPortStatIndex }
|
|
::= { switchPortStatTable 1 }
|
|
|
|
SwitchPortStatEntry ::= SEQUENCE {
|
|
swPortStatIndex Integer32,
|
|
swPortStatType INTEGER,
|
|
swPortStatLink INTEGER,
|
|
swPortStatState INTEGER,
|
|
swPortStatRXGoodPkt Integer32,
|
|
swPortStatRXBadPkt Integer32,
|
|
swPortStatRXAbortPkt Integer32,
|
|
swPortStatTXGoodPkt Integer32,
|
|
swPortStatTXBadPkt Integer32,
|
|
swPortStatPacketCollision Integer32
|
|
}
|
|
|
|
swPortStatIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of port statistic table."
|
|
::= { switchPortStatEntry 1 }
|
|
|
|
swPortStatType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hundredBaseTX(1),
|
|
thousandBaseT(2),
|
|
hundredBaseFX(3),
|
|
thousandBaseSX(4),
|
|
thousandBaseLX(5),
|
|
other(6),
|
|
notPresent(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the port type."
|
|
::= { switchPortStatEntry 2 }
|
|
|
|
swPortStatLink OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the link state."
|
|
::= { switchPortStatEntry 3 }
|
|
|
|
swPortStatState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the port state."
|
|
::= { switchPortStatEntry 4 }
|
|
|
|
swPortStatRXGoodPkt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of good frames received, which is the total number
|
|
of recieved unicast, broadcast, multicast and pause frames."
|
|
::= { switchPortStatEntry 5 }
|
|
|
|
swPortStatRXBadPkt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of bad frames received, which is the total number of
|
|
undersize, fragment, oversize, jabber, RXErr and FCSErr frames."
|
|
::= { switchPortStatEntry 6 }
|
|
|
|
swPortStatRXAbortPkt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of abort frames when receive, which is the total
|
|
number of discarded and filtered frames."
|
|
::= { switchPortStatEntry 7 }
|
|
|
|
swPortStatTXGoodPkt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of good frames transmitted, which is the total number
|
|
of transmitted unicast, broadcast, multicast and pause frames."
|
|
::= { switchPortStatEntry 8 }
|
|
|
|
swPortStatTXBadPkt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of FCSErr frames when transmit."
|
|
::= { switchPortStatEntry 9 }
|
|
|
|
swPortStatPacketCollision OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of collision."
|
|
::= { switchPortStatEntry 10 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- portmirroring
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
portMirrorStatus OBJECT-TYPE
|
|
SYNTAX Integer32 {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable or disable port mirroring.
|
|
Port mirroring is used to send a copy of inbound or outbound
|
|
network packets seen on one port to another switch port.
|
|
Administrators may utilized this mechanism to monitor network
|
|
traffic as well as the performance of a switch."
|
|
::= { portmirroring 1 }
|
|
|
|
portMirrorDestinationPortTX OBJECT-TYPE
|
|
SYNTAX Integer32(0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The TX destination port (sniffer port).
|
|
|
|
Destination port can be used to see all monitor port traffic.
|
|
You can connect sniffer port to a LAN analysier or netxray.
|
|
Set to 0 to clear the configuration. A destination port can
|
|
not be the same as a source port.
|
|
|
|
This object can not be modified if portMirrorStatus is
|
|
disable."
|
|
::= { portmirroring 2 }
|
|
|
|
portMirrorDestinationPortRX OBJECT-TYPE
|
|
SYNTAX Integer32(0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The RX destination port (sniffer port).
|
|
|
|
Destination port can be used to see all monitor port traffic.
|
|
You can connect sniffer port to a LAN analysier or netxray.
|
|
Set to 0 to clear the configuration. A destination port can
|
|
not be the same as a source port.
|
|
|
|
This object can not be modified if portMirrorStatus is
|
|
disable."
|
|
::= { portmirroring 3 }
|
|
|
|
portMirrorSourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortMirrorSourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information and configuration of port
|
|
mirroring in this system.
|
|
Use this table to select monitor port for this switch."
|
|
::= { portmirroring 4 }
|
|
|
|
portMirrorSourceEntry OBJECT-TYPE
|
|
SYNTAX PortMirrorSourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information configuring port mirroring on each port."
|
|
INDEX { portMirrorPortNum }
|
|
::= { portMirrorSourceTable 1 }
|
|
|
|
PortMirrorSourceEntry ::= SEQUENCE {
|
|
portMirrorPortNum Integer32,
|
|
portMirrorSourcePort INTEGER
|
|
}
|
|
|
|
portMirrorPortNum OBJECT-TYPE
|
|
SYNTAX Integer32(1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Port number."
|
|
::= { portMirrorSourceEntry 1 }
|
|
|
|
portMirrorSourcePort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
txOnly(1),
|
|
rxOnly(2),
|
|
rxAndTx(3),
|
|
disabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The mode of source port (monitor port).
|
|
(1) TX only.
|
|
(2) RX only.
|
|
(3) RX and TX.
|
|
(4) Source port is disabled.
|
|
The ports you want to monitor. All source port traffic
|
|
will be copied to destination port (sniffer port).
|
|
This object can not be modified if portMirrorStatus is
|
|
disable."
|
|
::= { portMirrorSourceEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- eventLog
|
|
-- -----------------------------------------------------------------------------
|
|
eventLogClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "clear all event log."
|
|
::= {eventLog 1 }
|
|
|
|
eventLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EventLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive information about logs."
|
|
::= { eventLog 2 }
|
|
|
|
eventLogEntry OBJECT-TYPE
|
|
SYNTAX EventLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table containing a log."
|
|
INDEX { eventLogIndex }
|
|
::= { eventLogTable 1 }
|
|
|
|
EventLogEntry ::= SEQUENCE {
|
|
eventLogIndex Integer32,
|
|
eventLogDescription DisplayString
|
|
}
|
|
|
|
eventLogIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index of log."
|
|
::= {eventLogEntry 1 }
|
|
|
|
eventLogDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..100))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The description of a log."
|
|
::= { eventLogEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- save
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
saveCfgMgtAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notActive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object to active(1) saves current configuration.
|
|
Setting this object to notActive(2) has no effect. The system
|
|
always returns the value notActive(2) when this object is read."
|
|
::= { save 1 }
|
|
|
|
END
|