Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
15536 lines
480 KiB
Text
15536 lines
480 KiB
Text
--MWRM-NETWORK-MIB VERSION 1.8.3.2
|
|
--MWRM (MicroWave-Radio-MIB)
|
|
MWRM-NETWORK-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
-- Ipv6Address FROM IPV6-TC
|
|
-- Counter, enterprises, Gauge, IpAddress FROM RFC1155-SMI
|
|
Counter32, enterprises, Gauge32, IpAddress FROM SNMPv2-SMI
|
|
DisplayString, ifIndex FROM RFC1213-MIB
|
|
RowStatus FROM SNMPv2-TC
|
|
MacAddress FROM SNMPv2-TC
|
|
OBJECT-TYPE FROM SNMPv2-SMI
|
|
TRAP-TYPE FROM RFC-1215
|
|
|
|
EnableDisable FROM MWRM-UNIT-MIB
|
|
EnableDisableSMI2 FROM MWRM-UNIT-MIB
|
|
OffOn FROM MWRM-UNIT-MIB
|
|
MetricImperial FROM MWRM-UNIT-MIB
|
|
AllowedNotAllowed FROM MWRM-UNIT-MIB
|
|
ProgressStatus FROM MWRM-UNIT-MIB
|
|
Severity FROM MWRM-UNIT-MIB
|
|
NoYes FROM MWRM-UNIT-MIB
|
|
DownUp FROM MWRM-UNIT-MIB
|
|
TrailIfType FROM MWRM-UNIT-MIB
|
|
PmTableType FROM MWRM-UNIT-MIB
|
|
RateMbps FROM MWRM-UNIT-MIB
|
|
HalfFull FROM MWRM-UNIT-MIB
|
|
BerLevel FROM MWRM-UNIT-MIB
|
|
SignalLevel FROM MWRM-UNIT-MIB
|
|
LoopbackType FROM MWRM-UNIT-MIB
|
|
QueueName FROM MWRM-UNIT-MIB
|
|
RadioId FROM MWRM-UNIT-MIB
|
|
RfuId FROM MWRM-UNIT-MIB
|
|
SwCommand FROM MWRM-UNIT-MIB
|
|
TrailProtectedType FROM MWRM-UNIT-MIB
|
|
ClockSrc FROM MWRM-UNIT-MIB
|
|
SlotId FROM MWRM-UNIT-MIB
|
|
Integrity FROM MWRM-UNIT-MIB
|
|
GreenYellow FROM MWRM-UNIT-MIB
|
|
InputSeverity FROM MWRM-UNIT-MIB
|
|
SwCommandTimer FROM MWRM-UNIT-MIB;
|
|
|
|
microwave-radio OBJECT IDENTIFIER ::= { enterprises 2281 }
|
|
genEquip OBJECT IDENTIFIER ::= { microwave-radio 10}
|
|
genEquipUnit OBJECT IDENTIFIER ::= { genEquip 1}
|
|
|
|
-- Local enumeration types
|
|
MediaType ::= INTEGER {
|
|
auto-type(0),
|
|
rj45(1),
|
|
sfp(2),
|
|
radio(3),
|
|
pwe3(4)
|
|
}
|
|
|
|
AutoNegMode ::= INTEGER {
|
|
off(0),
|
|
on(1),
|
|
restart(2)
|
|
}
|
|
|
|
SpeedDefs ::= INTEGER {
|
|
speed-10(0),
|
|
speed-100(1),
|
|
speed-1000(2),
|
|
speed-2500(3),
|
|
speed-10000(4)
|
|
}
|
|
|
|
MasterSalveSetMode ::= INTEGER {
|
|
auto(0),
|
|
slave(1),
|
|
master(2)
|
|
}
|
|
|
|
FlowControl ::= INTEGER {
|
|
disable(0),
|
|
rx(1),
|
|
tx-rx(2)
|
|
}
|
|
|
|
PortType ::= INTEGER {
|
|
management(0),
|
|
line(1),
|
|
radio(2),
|
|
pwe(3),
|
|
cpu(4)
|
|
}
|
|
|
|
EdgePortType ::= INTEGER {
|
|
none(0),
|
|
edge(1)
|
|
}
|
|
|
|
TrustMode ::= INTEGER {
|
|
untrust(0),
|
|
trust(1)
|
|
}
|
|
|
|
ServiceType ::= INTEGER {
|
|
mng(0),
|
|
mp(1),
|
|
p2p(2)
|
|
}
|
|
|
|
ServiceSubType ::= INTEGER {
|
|
ethernet(0),
|
|
tdm(1),
|
|
pwe(2)
|
|
}
|
|
|
|
ServiceAdmin ::= INTEGER {
|
|
reserved(0),
|
|
operational(1)
|
|
}
|
|
|
|
ServiceCosMode ::= INTEGER {
|
|
default-cos(0),
|
|
preserve-sp-cos(1)
|
|
}
|
|
|
|
SPType ::= INTEGER {
|
|
sap(0),
|
|
snp(1),
|
|
mng(2),
|
|
pipe(3)
|
|
}
|
|
|
|
SPSubType ::= INTEGER {
|
|
dot1q(0),
|
|
s-tag(1),
|
|
bundle-c(2),
|
|
bundle-s(3),
|
|
all-to-one(4),
|
|
qinq(5)
|
|
}
|
|
|
|
DisableAllowed ::= INTEGER {
|
|
disable(0),
|
|
allow(1)
|
|
}
|
|
|
|
SPCosMode ::= INTEGER {
|
|
sp-def-cos(0),
|
|
interface-decision(1),
|
|
pc1(2),
|
|
tcam(3)
|
|
}
|
|
|
|
SplitHorizonGroup ::= INTEGER {
|
|
group-a(0),
|
|
group-b(1),
|
|
group-c(2),
|
|
group-d(3)
|
|
}
|
|
|
|
TrueFalse ::= INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
|
|
PolicerType ::= INTEGER {
|
|
mef-trtcm(0)
|
|
}
|
|
|
|
PolicerColorMode ::= INTEGER {
|
|
color-blind(0),
|
|
color-aware(1)
|
|
}
|
|
|
|
PWfpClockSignal ::= INTEGER {
|
|
sync(0),
|
|
unframed(1),
|
|
e1-mf(2),
|
|
e1-mf-crc(3),
|
|
ds1-d4(4),
|
|
ds1-esf(5)
|
|
}
|
|
|
|
PWCclockSysRef ::= INTEGER {
|
|
none(0),
|
|
front-panel(1),
|
|
clock-recovery(2)
|
|
}
|
|
|
|
PWCDiffClockSrc ::= INTEGER {
|
|
none(0),
|
|
front-panel(1),
|
|
sys-ref(2),
|
|
clock-1588(3)
|
|
}
|
|
|
|
PWRtpTimeStampMode ::= INTEGER {
|
|
absolute(0),
|
|
differential(1)
|
|
}
|
|
|
|
PWTunnelPsnType ::= INTEGER {
|
|
upd-ip(0),
|
|
eth(1),
|
|
mpls(2)
|
|
}
|
|
|
|
PWTunnelVlanType ::= INTEGER {
|
|
none(0),
|
|
c-type(1),
|
|
s-type(2)
|
|
}
|
|
|
|
PWPDHClockSource ::= INTEGER {
|
|
sys-ref(0),
|
|
rx-sdh(1),
|
|
internal(2)
|
|
}
|
|
|
|
TunnelGroupProtectionCmd ::= INTEGER {
|
|
no-request(0),
|
|
force-switch(1),
|
|
manual-switch(2),
|
|
lockout(3),
|
|
clear(4)
|
|
}
|
|
|
|
PWSOAMccmInterval ::= INTEGER {
|
|
n3-3-ms(0),
|
|
n10-ms(1),
|
|
n100-ms(2),
|
|
n1-s(3),
|
|
n10-s(4),
|
|
n1-m(5),
|
|
n10-m(6)
|
|
}
|
|
|
|
Dot1CfmInterfaceStatus ::= INTEGER {
|
|
no-interface(0),
|
|
up(1),
|
|
down(2),
|
|
testing(3),
|
|
unknown(4),
|
|
dormant(5),
|
|
not-present(6),
|
|
lower-layer-down(7)
|
|
}
|
|
|
|
BurstType ::= INTEGER {
|
|
short(0),
|
|
long(1)
|
|
}
|
|
|
|
IfMgrTrueFalse ::= INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
|
|
MibTrueFalse ::= INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
|
|
G8032LastState ::= INTEGER {
|
|
nr(0),
|
|
raps-nr(1),
|
|
raps-rb-nr(2),
|
|
running-wtb(3),
|
|
expired-wtb(4),
|
|
running-wtr(5),
|
|
expired-wtr(6),
|
|
ms(7),
|
|
raps-ms(8),
|
|
raps-sd(9),
|
|
clear-sd(10),
|
|
local-sd(11),
|
|
raps-sf(12),
|
|
clear-sf(13),
|
|
local-sf(14),
|
|
raps-fs(15),
|
|
fs(16),
|
|
clear(17)
|
|
}
|
|
|
|
TDMLoopbackType ::= INTEGER {
|
|
none(0),
|
|
towards-line(1),
|
|
towards-system(2)
|
|
}
|
|
|
|
RSTLoopbackType ::= INTEGER {
|
|
none(0),
|
|
towards-system(1),
|
|
towards-line(2)
|
|
}
|
|
|
|
LBState ::=INTEGER {
|
|
soamLbInactive(0),
|
|
soamLbActive(1),
|
|
soamLbStopped(2),
|
|
soamLbCompleted(3),
|
|
soamLbFailed(4)
|
|
}
|
|
|
|
|
|
-- Network
|
|
genEquipNetwork OBJECT IDENTIFIER ::= {genEquip 2}
|
|
|
|
genEquipNetworkRemoteIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This value indicates the Remote IP address."
|
|
::= { genEquipNetwork 1 }
|
|
|
|
genEquipNetworkMateIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the Mate IP address. (same as genEquipProtectionMateIPAddr)"
|
|
::= { genEquipNetwork 2 }
|
|
|
|
genEquipNetworkAgentIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This value indicates the Agent IP address. (same as genEquipNetworkManagmentLocalIp)"
|
|
::= { genEquipNetwork 3 }
|
|
|
|
|
|
--- Network Managment information
|
|
genEquipNetworkManagment OBJECT IDENTIFIER ::= { genEquipNetwork 4}
|
|
|
|
genEquipNetworkManagmentLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the local IP address. (same as genEquipNetworkAgentIp)"
|
|
::= { genEquipNetworkManagment 1 }
|
|
|
|
genEquipNetworkManagmentLocalSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the local subnet mask. (for example 255.255.255.0)"
|
|
::= { genEquipNetworkManagment 2 }
|
|
|
|
genEquipNetworkManagmentLocalDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the local default gateway."
|
|
::= { genEquipNetworkManagment 3 }
|
|
|
|
genEquipNetworkManagmentLocalHWAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the MAC Address used for management (related to the management IP address of the system)."
|
|
::= { genEquipNetworkManagment 4 }
|
|
|
|
genEquipNetworkManagmentRemoteSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This value indicates the Remote subnet mask.(for example 255.255.255.0)"
|
|
::= { genEquipNetworkManagment 5 }
|
|
|
|
genEquipNetworkManagmentNumOfPorts OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the number of management ports."
|
|
::= { genEquipNetworkManagment 6 }
|
|
|
|
genEquipNetworkManagmentInBandVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4090)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the number of in-band VLANs."
|
|
::= { genEquipNetworkManagment 7 }
|
|
|
|
genEquipNetworkManagmentPortType OBJECT-TYPE
|
|
SYNTAX INTEGER { outOfBand(0), inBand(1) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a configurable option to use in-band or out-of-band management."
|
|
::= { genEquipNetworkManagment 8 }
|
|
|
|
genEquipNetworkManagmentPortCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
n64(0),
|
|
n128(1),
|
|
n256(2),
|
|
n512(3),
|
|
n1024(4),
|
|
n2048(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates a limit rate for the management port capacity in kbps."
|
|
::= { genEquipNetworkManagment 9 }
|
|
|
|
genEquipNetworkManagmentPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable the Auto Negotiation option, on all management ports."
|
|
::= { genEquipNetworkManagment 10 }
|
|
|
|
genEquipNetworkManagmentPortRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
n10(0),
|
|
n100(1),
|
|
n1000(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the port rate in Mbps (all management ports).
|
|
Possible values are:
|
|
- n10(0) 10Mbps
|
|
- n100(1) 100Mbps
|
|
- n1000(2) 1000Mbps"
|
|
::= { genEquipNetworkManagment 11 }
|
|
|
|
genEquipNetworkManagmentPortDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER { half(0), full(1) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the port duplex value, for all management ports."
|
|
::= { genEquipNetworkManagment 12 }
|
|
|
|
genEquipNetworkManagmentBlockMngTowardsLine OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Blocking the in-band management frames to egress via the Ethernet line interface in pipe application."
|
|
::= { genEquipNetworkManagment 13 }
|
|
|
|
genEquipNetworkManagmentIpAddrCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipNetworkManagmentIpAddrCfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
|
|
port number and description. It can be used by the NMS for topology discovery."
|
|
::= { genEquipNetworkManagment 20 }
|
|
|
|
genEquipNetworkManagmentIpAddrCfgEntry OBJECT-TYPE
|
|
SYNTAX GenEquipNetworkManagmentIpAddrCfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
|
|
port number and description. It can be used by the NMS for topology discovery."
|
|
INDEX { genEquipNetworkManagmentIpAddrCfgMngId }
|
|
::= { genEquipNetworkManagmentIpAddrCfgTable 1 }
|
|
|
|
GenEquipNetworkManagmentIpAddrCfgEntry ::=
|
|
SEQUENCE {
|
|
genEquipNetworkManagmentIpAddrCfgMngId
|
|
INTEGER,
|
|
genEquipNetworkManagmentIpAddrCfgIpv4Address
|
|
IpAddress,
|
|
genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask
|
|
IpAddress,
|
|
genEquipNetworkManagmentIpAddrCfgDefaultGateway
|
|
IpAddress,
|
|
genEquipNetworkManagmentIpAddrCfgIpv6Address
|
|
OCTET STRING,
|
|
genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength
|
|
INTEGER,
|
|
genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6
|
|
OCTET STRING
|
|
}
|
|
|
|
genEquipNetworkManagmentIpAddrCfgMngId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Management Ifindex."
|
|
::= { genEquipNetworkManagmentIpAddrCfgEntry 1 }
|
|
|
|
genEquipNetworkManagmentIpAddrCfgIpv4Address OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the local IP address"
|
|
::= { genEquipNetworkManagmentIpAddrCfgEntry 2 }
|
|
|
|
genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the local subnet mask. (for example 255.255.255.0)"
|
|
::= { genEquipNetworkManagmentIpAddrCfgEntry 3 }
|
|
|
|
genEquipNetworkManagmentIpAddrCfgDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the local default gateway."
|
|
::= { genEquipNetworkManagmentIpAddrCfgEntry 4 }
|
|
|
|
genEquipNetworkManagmentIpAddrCfgIpv6Address OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the Local IPv6.
|
|
y is a 16-bit hexadecimal field of the form xxxx, where x takes values from 0 to F."
|
|
::= { genEquipNetworkManagmentIpAddrCfgEntry 5 }
|
|
|
|
genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IPv6 Prefix-Length specifies the IPv6 subnet."
|
|
::= { genEquipNetworkManagmentIpAddrCfgEntry 6 }
|
|
|
|
genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the local IPv6 default gateway."
|
|
::= { genEquipNetworkManagmentIpAddrCfgEntry 7 }
|
|
|
|
|
|
--- IP Table information
|
|
genEquipNetworkIP OBJECT IDENTIFIER ::= { genEquipNetwork 5}
|
|
|
|
genEquipNetworkIPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipNetworkIPEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
|
|
port number and description. It can be used by the NMS for topology discovery."
|
|
::= { genEquipNetworkIP 1 }
|
|
|
|
genEquipNetworkIPEntry OBJECT-TYPE
|
|
SYNTAX GenEquipNetworkIPEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
|
|
port number and description. It can be used by the NMS for topology discovery."
|
|
INDEX { ifIndex }
|
|
::= { genEquipNetworkIPTable 1 }
|
|
|
|
GenEquipNetworkIPEntry ::=
|
|
SEQUENCE {
|
|
genEquipNetworkIPEthernetPort
|
|
INTEGER,
|
|
genEquipNetworkIPPeerMacAddr
|
|
OCTET STRING,
|
|
genEquipNetworkIPPeerIPAddr
|
|
IpAddress,
|
|
genEquipNetworkIPPeerSlotID
|
|
INTEGER,
|
|
genEquipNetworkIPPeerPortNumber
|
|
INTEGER,
|
|
genEquipNetworkIPPeerDescr
|
|
DisplayString,
|
|
genEquipNetworkIPPeerNodeToNodeConnection
|
|
EnableDisable
|
|
}
|
|
|
|
genEquipNetworkIPEthernetPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet port (local port) is the index of the table, to be taken from ifIndex."
|
|
::= { genEquipNetworkIPEntry 1 }
|
|
|
|
genEquipNetworkIPPeerMacAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Peer (far-end) Mac address of the managed NE (CPU) connected on the local Ethernet port"
|
|
::= { genEquipNetworkIPEntry 2 }
|
|
|
|
genEquipNetworkIPPeerIPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Peer (far-end) IP address of the managed NE (CPU) connected on the local Ethernet port"
|
|
::= { genEquipNetworkIPEntry 3 }
|
|
|
|
genEquipNetworkIPPeerSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Peer (far-end) slot-id of the managed NE connected on the local Ethernet port."
|
|
::= { genEquipNetworkIPEntry 4 }
|
|
|
|
genEquipNetworkIPPeerPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Peer (far-end) port number of the managed NE connected on the local Ethernet port. The port number is sequential
|
|
starting with 1"
|
|
::= { genEquipNetworkIPEntry 5 }
|
|
|
|
genEquipNetworkIPPeerDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User defined description for the peer port"
|
|
::= { genEquipNetworkIPEntry 6 }
|
|
|
|
genEquipNetworkIPPeerNodeToNodeConnection OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Node To Node Connection.
|
|
This column is relevant only for STM-1/OC-3 connections.
|
|
if this parameter is enabled, it means that the STM-1/OC-3 port is connected with another microwave-radio NE,
|
|
the STM-1/OC-3 port is not an access port, it is used by the NMS to find TDM trails."
|
|
::= { genEquipNetworkIPEntry 7 }
|
|
|
|
|
|
genEquipNetworkIPClearAllPeerInfo OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter is a command to clear the neighbor IP table info"
|
|
::= { genEquipNetworkIP 2 }
|
|
|
|
genEquipNetworkFloatingIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value indicates the floating IP used when system is in protection mode.
|
|
This address must differ from system's own IP address (genEquipNetworkAgentIp)
|
|
as well as mate unit's (genEquipProtectionMateIPAddr)and must be in the same subnet.
|
|
A value of 0.0.0.0 will disable the feature."
|
|
::= { genEquipNetwork 6 }
|
|
|
|
genEquipNetworkAgentIpV6 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This value indicates the agent IP V6. This parameter will be use for Trap only."
|
|
::= { genEquipNetwork 7 }
|
|
|
|
-- Services Configuration
|
|
genEquipServices OBJECT IDENTIFIER ::= {genEquip 8}
|
|
-- Ethernet Switch
|
|
genEquipEthernetSwitch OBJECT IDENTIFIER ::= {genEquipServices 1}
|
|
|
|
-- Ethernet Switch configuration
|
|
genEquipEthernetSwitchCfg OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 1}
|
|
|
|
genEquipEthernetSwitchCfgAppType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
single-pipe(1),
|
|
managed-switch(2),
|
|
metro-switch(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The mode of the switch application. Note, managed-switch or metro-swtich require license.
|
|
Single-pipe: No switching is done, the NE acts as a Pipe.
|
|
Managed-switch: The switch application is configured as IEEE 802.1Q switch.
|
|
Metro-switch: The switch application is configured as IEEE 802.1ad switch."
|
|
::= { genEquipEthernetSwitchCfg 1 }
|
|
|
|
genEquipEthernetSwitchCfgVIDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchCfgVIDEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The switch VLAN table."
|
|
::= { genEquipEthernetSwitchCfg 2 }
|
|
|
|
genEquipEthernetSwitchCfgVIDEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchCfgVIDEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The switch VLAN table."
|
|
INDEX { genEquipEthernetSwitchCfgVIDIndex }
|
|
::= { genEquipEthernetSwitchCfgVIDTable 1 }
|
|
|
|
GenEquipEthernetSwitchCfgVIDEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchCfgVIDIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchCfgVIDName
|
|
DisplayString,
|
|
genEquipEthernetSwitchCfgVIDState
|
|
INTEGER,
|
|
genEquipEthernetSwitchCfgVIDMemberPorts
|
|
DisplayString,
|
|
genEquipEthernetSwitchCfgVIDEVCID
|
|
DisplayString,
|
|
genEquipEthernetSwitchCfgVIDEVCDescription
|
|
DisplayString,
|
|
genEquipEthernetSwitchCfgVIDRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipEthernetSwitchCfgVIDIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN number, the index of the table."
|
|
::= { genEquipEthernetSwitchCfgVIDEntry 1 }
|
|
|
|
genEquipEthernetSwitchCfgVIDName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN name."
|
|
::= { genEquipEthernetSwitchCfgVIDEntry 2 }
|
|
|
|
genEquipEthernetSwitchCfgVIDState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
suspend(1),
|
|
active(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN state."
|
|
::= { genEquipEthernetSwitchCfgVIDEntry 3 }
|
|
|
|
genEquipEthernetSwitchCfgVIDMemberPorts OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string that indicates in which ports this VLAN is allowed. Port numbers are separated by spaces"
|
|
::= { genEquipEthernetSwitchCfgVIDEntry 4 }
|
|
|
|
genEquipEthernetSwitchCfgVIDEVCID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter defines a name for the Ethernet service running over this VLAN.
|
|
This information is used by the NMS as a service identifier"
|
|
::= { genEquipEthernetSwitchCfgVIDEntry 5 }
|
|
|
|
genEquipEthernetSwitchCfgVIDEVCDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter allows adding a description for the Ethernet service running over this VLAN.
|
|
This information is informational only for users purposes"
|
|
::= { genEquipEthernetSwitchCfgVIDEntry 6 }
|
|
|
|
genEquipEthernetSwitchCfgVIDRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus -- active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The raw status of the vlan table."
|
|
::= { genEquipEthernetSwitchCfgVIDEntry 30 }
|
|
|
|
genEquipEthernetSwitchCfgPbbteEthertype OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PBB-TE-Tag ethertype value"
|
|
::= { genEquipEthernetSwitchCfg 3 }
|
|
|
|
genEquipEthernetSwitchCfgProviderEthertype OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
i0x8100(0),
|
|
i0x88A8(1),
|
|
i0x9100(2),
|
|
i0x9200(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethertype of the provider VLANS (S-tag). This parameter configures the Marvell switch
|
|
and it applys for all the ethernet ports. Possible choises are { 0x8100 , 0x9100 , 0x88A8 , 0x9200 }."
|
|
::= { genEquipEthernetSwitchCfg 4 }
|
|
|
|
genEquipEthernetSwitchCfgJumboModeAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This configuration defines the Ethernet Maximal Transmit Unit (MTU) size.
|
|
When jumbo mode is enabled, MTU=9612 bytes. When disabled, MTU=1632 bytes.
|
|
This configuration applies to all Ethernet traffic ports except management ports"
|
|
::= { genEquipEthernetSwitchCfg 5 }
|
|
|
|
|
|
-- Ethernet Switch xSTP
|
|
genEquipEthernetSwitchXSTP OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 2}
|
|
|
|
genEquipEthernetSwitchXSTPProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
stp(1),
|
|
rstp(2),
|
|
ring-rstp(3),
|
|
mstp(4),
|
|
ring-mstp(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Selection of the xSTP protocol. Note that not all protocols may be available in all software releases"
|
|
::= { genEquipEthernetSwitchXSTP 1 }
|
|
|
|
-- Ethernet Switch RSTP family (Ring RSTP or RSTP)
|
|
genEquipEthernetSwitchXSTPParams OBJECT IDENTIFIER ::= {genEquipEthernetSwitchXSTP 2}
|
|
|
|
|
|
genEquipEthernetSwitchXSTPBridgeID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RSTP bridge ID"
|
|
::= { genEquipEthernetSwitchXSTPParams 1 }
|
|
|
|
genEquipEthernetSwitchXSTPRootID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RSTP root id."
|
|
::= { genEquipEthernetSwitchXSTPParams 2 }
|
|
|
|
genEquipEthernetSwitchXSTPRootPath OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RSTP root path cost."
|
|
::= { genEquipEthernetSwitchXSTPParams 3 }
|
|
|
|
genEquipEthernetSwitchXSTPBridgeRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
root-bridge(0),
|
|
designated-bridge(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The bridge role."
|
|
::= { genEquipEthernetSwitchXSTPParams 4 }
|
|
|
|
genEquipEthernetSwitchXSTPCfgPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..61440)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTP Bridge priority."
|
|
::= { genEquipEthernetSwitchXSTPParams 5 }
|
|
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTP port status table."
|
|
::= { genEquipEthernetSwitchXSTPParams 6 }
|
|
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTP port status table."
|
|
INDEX { ifIndex }
|
|
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsTable 1 }
|
|
|
|
GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsState
|
|
INTEGER,
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsRole
|
|
INTEGER,
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost
|
|
INTEGER,
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsPriority
|
|
INTEGER,
|
|
genEquipEthernetSwitchXSTPParamsEthernetDesPathCost
|
|
INTEGER,
|
|
genEquipEthernetSwitchXSTPParamsEthernetEdgePort
|
|
NoYes
|
|
}
|
|
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
discarding(0),
|
|
listening(1),
|
|
learning(2),
|
|
forwarding(3),
|
|
blocking(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTP port state."
|
|
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 1 }
|
|
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
masterport(0),
|
|
alternate(1),
|
|
rootport(2),
|
|
designated(3),
|
|
disabled(4),
|
|
backup(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTP port role."
|
|
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 2 }
|
|
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..200000000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTP configured path cost."
|
|
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 3 }
|
|
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..240)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTP configured port priority."
|
|
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 4 }
|
|
|
|
genEquipEthernetSwitchXSTPParamsEthernetDesPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTP designated path cost. This is the path cost to the root port from this local port."
|
|
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 5 }
|
|
|
|
genEquipEthernetSwitchXSTPParamsEthernetEdgePort OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter indicates if the port is an Edge port or not."
|
|
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 6 }
|
|
|
|
|
|
|
|
|
|
-- Ethernet Switch QoS & Rate Limiting
|
|
genEquipEthernetSwitchQoS OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 3}
|
|
|
|
genEquipEthernetSwitchQoSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The switch application, QoS Table."
|
|
::= { genEquipEthernetSwitchQoS 1 }
|
|
|
|
genEquipEthernetSwitchQoSEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchQoSEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The switch application, QoS Table, per Ethernet port based on ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { genEquipEthernetSwitchQoSTable 1 }
|
|
|
|
GenEquipEthernetSwitchQoSEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchQoSFirstCrit
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSSecondCrit
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSThirdCrit
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSDefClassification
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSEgressSched
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSEgressShaper
|
|
OffOn,
|
|
genEquipEthernetSwitchQoSEgressShaperRate
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSIngressPolicer
|
|
DisplayString
|
|
}
|
|
|
|
genEquipEthernetSwitchQoSFirstCrit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
queueDecision(1),
|
|
pbitOverride(2),
|
|
queueAndPbitOverride(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"First classification criteria. This is the first criteria which will be evaluated for incoming frames.
|
|
queueDecision causes classification by defined static MAC address.
|
|
pbitOverride causes classification by pbits.
|
|
queueAndPbitOverridecauses classification by defined static MAC address, and changes the pbits accordingly."
|
|
::= { genEquipEthernetSwitchQoSEntry 1 }
|
|
|
|
genEquipEthernetSwitchQoSSecondCrit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
queueDecision(1),
|
|
pbitOverride(2),
|
|
queueAndPbitOverride(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Second classification criteria. Applicable if match with first criteria is not found.
|
|
queueDecision causes classification by defined VLAN to queue mapping.
|
|
pbitOverride causes classification by pbits.
|
|
queueAndPbitOverrideclassification by defined VLAN to queue mapping, and changes the pbits accordingly."
|
|
|
|
::= { genEquipEthernetSwitchQoSEntry 2 }
|
|
|
|
genEquipEthernetSwitchQoSThirdCrit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipTosPriority(0),
|
|
vlanPbitspriority(1),
|
|
ipTosOverVlanPbitsPriority(2),
|
|
vlanPbitsOverIpTosPriority(3),
|
|
portPriority(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Third classification criteria. Applicable if match with first or second criteria is not found.
|
|
ipTosPriority causes classification by defined IP TOS to queue mapping only.
|
|
vlanPbitspriority causes classification by pbits only.
|
|
ipTosOverVlanPbitsPriority causes classification by IP TOS and then by pbits .
|
|
ipTosOverVlanPbitsPriority causes classification by pbits and then by IP TOS.
|
|
portPriority causes port-based classification according to port priority."
|
|
::= { genEquipEthernetSwitchQoSEntry 3 }
|
|
|
|
genEquipEthernetSwitchQoSDefClassification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
first(0),
|
|
second(1),
|
|
third(2),
|
|
fourth(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Default classification for frame that does suit to the previous classifications.
|
|
Choosing first will classify this frame as the first criteria for example."
|
|
::= { genEquipEthernetSwitchQoSEntry 4 }
|
|
|
|
genEquipEthernetSwitchQoSEgressSched OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allQueuesStrict(0),
|
|
fourthQueueStrict(1),
|
|
fourthThirdQueuesStrict(2),
|
|
allQueuesHrr(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress scheduler options."
|
|
::= { genEquipEthernetSwitchQoSEntry 5 }
|
|
|
|
genEquipEthernetSwitchQoSEgressShaper OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable egress shaping."
|
|
::= { genEquipEthernetSwitchQoSEntry 6 }
|
|
|
|
genEquipEthernetSwitchQoSEgressShaperRate OBJECT-TYPE
|
|
SYNTAX INTEGER (64..1000000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress shaper rate."
|
|
::= { genEquipEthernetSwitchQoSEntry 7 }
|
|
|
|
genEquipEthernetSwitchQoSIngressPolicer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress policer (rate limiting) name assiciated with this port.
|
|
The policer Name is defined in genEquipEthernetSwitchQoSPolicerNameName (in a table)"
|
|
::= { genEquipEthernetSwitchQoSEntry 8 }
|
|
|
|
|
|
-- VLAN Pbit Remap table
|
|
genEquipEthernetSwitchVlanPbitRemapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchVlanPbitRemapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN priority bits remapping table."
|
|
::= { genEquipEthernetSwitchQoS 2 }
|
|
|
|
genEquipEthernetSwitchVlanPbitRemapEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchVlanPbitRemapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN priority bits remap table."
|
|
INDEX { ifIndex, genEquipEthernetSwitchVlanPbitRemapPbit }
|
|
::= { genEquipEthernetSwitchVlanPbitRemapTable 1 }
|
|
|
|
GenEquipEthernetSwitchVlanPbitRemapEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchVlanPbitRemapPbit
|
|
INTEGER,
|
|
genEquipEthernetSwitchVlanPbitRemapRemappedPbit
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchVlanPbitRemapPbit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ingress Pbit."
|
|
::= { genEquipEthernetSwitchVlanPbitRemapEntry 1 }
|
|
|
|
genEquipEthernetSwitchVlanPbitRemapRemappedPbit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The remapped Pbit."
|
|
::= { genEquipEthernetSwitchVlanPbitRemapEntry 2 }
|
|
|
|
-- VLAN Id Queue
|
|
genEquipEthernetSwitchQoSVLANIdToQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSVLANIdToQueueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN Id to Queue mapping table."
|
|
::= { genEquipEthernetSwitchQoS 3 }
|
|
|
|
genEquipEthernetSwitchQoSVLANIdToQueueEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchQoSVLANIdToQueueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN Id to Queue mapping table."
|
|
INDEX { genEquipEthernetSwitchCfgVIDIndex } -- list of all defined vlans (vlan index)
|
|
::= { genEquipEthernetSwitchQoSVLANIdToQueueTable 1 }
|
|
|
|
GenEquipEthernetSwitchQoSVLANIdToQueueEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchQoSVLANIdToQueueQueue
|
|
QueueName
|
|
}
|
|
|
|
|
|
genEquipEthernetSwitchQoSVLANIdToQueueQueue OBJECT-TYPE
|
|
SYNTAX QueueName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Queue for the vlan."
|
|
::= { genEquipEthernetSwitchQoSVLANIdToQueueEntry 1 }
|
|
|
|
|
|
-- LAG Defenitions
|
|
genEquipEthernetSwitchLag OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 4}
|
|
|
|
genEquipEthernetSwitchLagDistFunction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
simple-xor(0),
|
|
hash(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LAG distribution function. "
|
|
::= { genEquipEthernetSwitchLag 1 }
|
|
|
|
genEquipEthernetSwitchLagMaxNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Max number of LAG port groups."
|
|
::= { genEquipEthernetSwitchLag 2 }
|
|
|
|
|
|
-- Traffic Managment Defenitions
|
|
genEquipEthernetSwitchETM OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 5}
|
|
|
|
genEquipEthernetSwitchEtmAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling the entire enhanced TM functionality."
|
|
::= { genEquipEthernetSwitchETM 1 }
|
|
|
|
genEquipEthernetSwitchEtmPTPOptimizedTransportModeAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Precision Time Protocol low PDV channel admin Upon enabling all the packets classified to the 8th
|
|
queue will bypass the scheduler and will be sent directly to the Radio Frame.
|
|
Enabling this parameter will fail if Wayside is enabled."
|
|
::= { genEquipEthernetSwitchETM 2 }
|
|
|
|
genEquipEthernetSwitchEtmCountersClear OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reset selected module's counters."
|
|
::= { genEquipEthernetSwitchETM 3 }
|
|
|
|
genEquipEthernetSwitchEtmPTPOptimizedTransportMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
high-Cos-Queue-8(0),
|
|
ieee-1588(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PTP optimized transport channel operation mode. In High-CoS-Queue-8 mode all the frames that will be classified
|
|
to the 8th queue in the traffic manager will be send to the PTP optimized transport channel.
|
|
In IEEE-1588 mode IEEE 1588 frames will be identified automatically based on UDP ports and/or ethertypes."
|
|
::= { genEquipEthernetSwitchETM 4 }
|
|
|
|
|
|
-- TM Packet classification tables and control parameters.
|
|
genEquipEthernetSwitchEtmClassifier OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 6}
|
|
|
|
-- TM CoS classification by destination MAC address.
|
|
genEquipEthernetSwitchEtmClassifierByMac OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 1}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMacAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling CoS and color classification by destination MAC addresses."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMac 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByMacEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for CoS and color classification by destination MAC address."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMac 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMacEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierByMacEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for CoS and color classification by destination MAC address."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByMacIndex }
|
|
::= { genEquipEthernetSwitchEtmClassifierByMacTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierByMacEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByMacIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByMacValue
|
|
OCTET STRING,
|
|
genEquipEthernetSwitchEtmClassifierByMacCos
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByMacColor
|
|
GreenYellow,
|
|
genEquipEthernetSwitchEtmClassifierByMacRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMacIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index is pointing to a table entry. Each entry contains different MAC address."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMacValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC Address value for CoS Classification by MAC Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMacCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value for CoS Classification by MAC Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMacColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color value for CoS Classification by MAC Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 4 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row Status for this table."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 30 }
|
|
|
|
|
|
-- TM CoS classification by UDP port.
|
|
genEquipEthernetSwitchEtmClassifierByUdpPort OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 2}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling CoS and color classification by UDP source and/or destination ports."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPort 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByUdpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for CoS and color classification by UDP ports. Classification may be based on source port,
|
|
dest port ,or both - use validity parameter."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPort 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierByUdpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Entry for CoS and color classification by UDP ports. Classification may be based on source port,
|
|
dest port ,or both - use validity parameter."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByUdpPortIndex }
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPortTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierByUdpPortEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortDestPort
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortCos
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortColor
|
|
GreenYellow,
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortValidity
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index is pointing to a table entry. Each entry contains different UDP source and destination ports."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"UDP source port value for CoS Classification by UDP ports Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"UDP dest. port value for CoS Classification by UDP ports Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value for CoS Classification by UDP Ports Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 4 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color value for CoS Classification by UDP ports Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 5 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortValidity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unused(0),
|
|
src(1),
|
|
dest(2),
|
|
both(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Validity value for CoS Classification by UDP ports Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 6 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row Status for this table."
|
|
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 30 }
|
|
|
|
-- TM CoS classification by Ethertypes.
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypes OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 3}
|
|
--
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesAdmin OBJECT-TYPE
|
|
-- SYNTAX EnableDisable
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Enabling/Disabling CoS and color classification by Ethertypes."
|
|
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypes 1 }
|
|
--
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByEthertypesEntry
|
|
-- ACCESS not-accessible
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Table for CoS and color classification by Ethertype."
|
|
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypes 2 }
|
|
--
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesEntry OBJECT-TYPE
|
|
-- SYNTAX GenEquipEthernetSwitchEtmClassifierByEthertypesEntry
|
|
-- ACCESS not-accessible
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Table entry for CoS and color classification by Ethertype."
|
|
-- INDEX { genEquipEthernetSwitchEtmClassifierByEthertypesIndex }
|
|
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesTable 1 }
|
|
--
|
|
-- GenEquipEthernetSwitchEtmClassifierByEthertypesEntry ::=
|
|
-- SEQUENCE {
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesIndex
|
|
-- INTEGER,
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesValue
|
|
-- INTEGER,
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesCos
|
|
-- INTEGER,
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesColor
|
|
-- GreenYellow,
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesRowStatus
|
|
-- RowStatus
|
|
-- }
|
|
--
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..16)
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "The index is pointing to a table entry. Each entry contains different Ethertype value."
|
|
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 1 }
|
|
--
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesValue OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Ethertype tag value for CoS Classification by Ethertype Table Entry."
|
|
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 2 }
|
|
--
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesCos OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..7)
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "CoS value for CoS Classification by Ethertype Table Entry."
|
|
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 3 }
|
|
--
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesColor OBJECT-TYPE
|
|
-- SYNTAX GreenYellow
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Color value for CoS Classification by Ethertype Table Entry."
|
|
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 4 }
|
|
--
|
|
-- genEquipEthernetSwitchEtmClassifierByEthertypesRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Row Status for this table."
|
|
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 30 }
|
|
--
|
|
-- TM CoS classification by Known PDU MAC addresses.
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMac OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 4}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling CoS and color classification by known PDU MAC addresses."
|
|
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMac 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for CoS and color classification by known PDU MAC addresses."
|
|
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMac 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table entry for CoS and color classification by known PDU MAC addresses."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex }
|
|
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress
|
|
OCTET STRING,
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacCos
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacColor
|
|
GreenYellow,
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity
|
|
EnableDisable
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..66)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index is pointing to a table entry. Each entry contains different PDU MAC address value."
|
|
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value for MAC address Classification by known PDU Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value for CoS Classification by known PDU Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color value for CoS Classification by known PDU Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 4 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Validity value for Cos Classification by known PDU Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 5 }
|
|
|
|
|
|
-- TM CoS classification by Service.
|
|
genEquipEthernetSwitchEtmClassifierByService OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 5}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByServiceAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling CoS and color classification by service IDs."
|
|
::= { genEquipEthernetSwitchEtmClassifierByService 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for CoS and color classification by service-ids."
|
|
::= { genEquipEthernetSwitchEtmClassifierByService 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByServiceEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierByServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table entry for CoS and color classification by service-ids."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByServiceIndex }
|
|
::= { genEquipEthernetSwitchEtmClassifierByServiceTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierByServiceEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByServiceIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByServiceCos
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByServiceColor
|
|
GreenYellow,
|
|
genEquipEthernetSwitchEtmClassifierByServiceUsage
|
|
EnableDisable
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index is pointing to a table entry. Each entry contains a mapping of service-id to CoS."
|
|
::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByServiceCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value for CoS serviceID Mapping Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByServiceColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color value for CoS serviceId Mapping Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByServiceUsage OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Validity value for CoS serviceID Mapping Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 4 }
|
|
|
|
-- TM CoS classification by VLAN P-bits.
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbits OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 6}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling CoS and color classification by VLAN P-bits and CFI/DEI bit."
|
|
::= { genEquipEthernetSwitchEtmClassifierByVlanPbits 1 }
|
|
|
|
-- Vlan table
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for CoS and color classification by VLAN S-tag P-bits and DEI bit."
|
|
::= { genEquipEthernetSwitchEtmClassifierByVlanPbits 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table entry for CoS and color classification by VLAN S-tag P-bits and DEI bit."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex }
|
|
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor
|
|
GreenYellow
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pbit vlan index to table."
|
|
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pbit value for regular classification prioritization."
|
|
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"DEI value for regular classification prioritization by S-tag vlan."
|
|
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value for regular classification prioritization by S-tag VLAN."
|
|
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 4 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color value for regular classification prioritization by S-tag VLAN."
|
|
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 5 }
|
|
|
|
-- TM CoS classification by IP DSCP bits.
|
|
genEquipEthernetSwitchEtmClassifierByDscp OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 7}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByDscpAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling Cos and color classification by DSCP/TOS bits."
|
|
::= { genEquipEthernetSwitchEtmClassifierByDscp 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByDscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByDscpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for CoS and color classification by DSCP/TOS bits."
|
|
::= { genEquipEthernetSwitchEtmClassifierByDscp 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByDscpEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierByDscpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table entry for CoS and color classification by DSCP/TOS bits."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByDscpValue }
|
|
::= { genEquipEthernetSwitchEtmClassifierByDscpTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierByDscpEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByDscpValue
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByDscpCos
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByDscpColor
|
|
GreenYellow
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByDscpValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index is pointing to a table entry. Each entry contains different DSCP/TOS bits mapping."
|
|
::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByDscpCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value for regular classification prioritization by DSCP-tag."
|
|
::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByDscpColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color value for regular classification prioritization by MPLS."
|
|
::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 3 }
|
|
|
|
-- TM CoS classification by MPLS experimental bits.
|
|
genEquipEthernetSwitchEtmClassifierByMplsExp OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 8}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling CoS and color classification by MPLS experimantal bits."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMplsExp 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByMplsExpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for CoS and color classification by MPLS experimental bits."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMplsExp 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierByMplsExpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table entry for CoS and color classification by MPLS experimental bits."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByMplsExpValue }
|
|
::= { genEquipEthernetSwitchEtmClassifierByMplsExpTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierByMplsExpEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpValue
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpCos
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpColor
|
|
GreenYellow
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index is pointing to a table entry. Each entry contains different MPLS experimantal bits mapping."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"value for regular classification prioritization by MPLS."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByMplsExpColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color value for regular classification prioritization by MPLS."
|
|
::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 3 }
|
|
|
|
-- TM CoS default color defs.
|
|
genEquipEthernetSwitchEtmClassifierByDefaultCosColor OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 9}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByDefaultCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value for regular classification prioritization by default port."
|
|
::= { genEquipEthernetSwitchEtmClassifierByDefaultCosColor 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByDefaultColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for regular priority by default port mapping table."
|
|
::= { genEquipEthernetSwitchEtmClassifierByDefaultCosColor 2 }
|
|
|
|
-- TM CoS classification by Cos To Queue
|
|
genEquipEthernetSwitchEtmClassifierByCosToQueue OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 10}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByCosToQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for VLAN to FlowId mapping ."
|
|
::= { genEquipEthernetSwitchEtmClassifierByCosToQueue 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByCosToQueueEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for VLAN to FlowId mapping ."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByCosToQueueIndex }
|
|
::= { genEquipEthernetSwitchEtmClassifierByCosToQueueTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByCosToQueueIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByCosToQueueValue
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByCosToQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue."
|
|
::= { genEquipEthernetSwitchEtmClassifierByCosToQueueEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByCosToQueueValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Queue index for CoS to Queue Mapping Table Entry."
|
|
::= { genEquipEthernetSwitchEtmClassifierByCosToQueueEntry 2 }
|
|
|
|
-- TM CoS classification by Vlan to Service
|
|
genEquipEthernetSwitchEtmClassifierVlanidToService OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 11}
|
|
|
|
genEquipEthernetSwitchEtmClassifierVlanidToServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for VLAN to Vlan To Servies mapping ."
|
|
::= { genEquipEthernetSwitchEtmClassifierVlanidToService 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for VLAN to Vlan To Servies mapping ."
|
|
INDEX { genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex }
|
|
::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue."
|
|
::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service ID."
|
|
::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry 2 }
|
|
|
|
|
|
|
|
-- TM Classifier Inband Managment Qos
|
|
-- Cos and Color classification by VLAN-ID. Only a single VLAN-ID value can be specified.
|
|
-- This is configuration should be used for inband management VLAN-ID classification to the high priority queue.
|
|
genEquipEthernetSwitchEtmClassifierInbandMgmtQoS OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 12}
|
|
|
|
genEquipEthernetSwitchEtmClassifierInbandMgmtAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling CoS and Color classification by VLAN ID."
|
|
::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 1 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4090)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Inband Management vlan id. This parameter should be the same as genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId."
|
|
::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 2 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierInbandMgmtCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Class of Service. Allowed values: [0-7]."
|
|
::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 3 }
|
|
|
|
genEquipEthernetSwitchEtmClassifierInbandMgmtColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color 1=green ; 0=yellow."
|
|
::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 4 }
|
|
|
|
|
|
-- TM ACM drop per queue paramters.
|
|
--genEquipEthernetSwitchEtmAcmDropPerQueue OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 7}
|
|
|
|
-- TM Policers configuration and mapping tables and parameters
|
|
genEquipEthernetSwitchEtmPolicers OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 8}
|
|
|
|
genEquipEthernetSwitchEtmPolicerModuleAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling Policing."
|
|
::= { genEquipEthernetSwitchEtmPolicers 1 }
|
|
|
|
-- Table of Service to Policeer mapping
|
|
genEquipEthernetSwitchEtmServiceToPolicerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmServiceToPolicerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of Service to Policeer mapping."
|
|
::= { genEquipEthernetSwitchEtmPolicers 2 }
|
|
|
|
genEquipEthernetSwitchEtmServiceToPolicerEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmServiceToPolicerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of Service to Policeer mapping."
|
|
INDEX { genEquipEthernetSwitchEtmServiceToPolicerIndex }
|
|
::= { genEquipEthernetSwitchEtmServiceToPolicerTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmServiceToPolicerEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmServiceToPolicerIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmServiceToPolicerValue
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmServiceToPolicerPerCosOption
|
|
EnableDisable
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmServiceToPolicerIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Index."
|
|
::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmServiceToPolicerValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Policer to be used for the specific Service."
|
|
::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmServiceToPolicerPerCosOption OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Policer per CoS option. If enabled, each Service will be mapped to 8 policers while each policer will be used
|
|
for a different CoS value. This option can be used only for the pilicers with indeces of multiple of 8. i.e 8,16,24,32,240,248."
|
|
::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 3 }
|
|
|
|
|
|
-- Table of Policers configuration
|
|
genEquipEthernetSwitchEtmPolicerConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmPolicerConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of Policers configuration."
|
|
::= { genEquipEthernetSwitchEtmPolicers 3 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmPolicerConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of Policers configuration."
|
|
INDEX { genEquipEthernetSwitchEtmPolicerConfigIndex }
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmPolicerConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmPolicerConfigIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmPolicerConfigAdmin
|
|
EnableDisable,
|
|
genEquipEthernetSwitchEtmPolicerConfigColorAware
|
|
EnableDisable,
|
|
genEquipEthernetSwitchEtmPolicerConfigCir
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmPolicerConfigCbs
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmPolicerConfigEir
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmPolicerConfigEbs
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmPolicerConfigCoupling
|
|
EnableDisable,
|
|
genEquipEthernetSwitchEtmPolicerConfigLineComp
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Index."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress policer admin disables/enables the policing feature per policer.
|
|
If not enabled, the policer is in bypass mode (no rate limiting)."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigColorAware OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Whether policer is color aware."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigCir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress policer CIR value - the committed rate user requests."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 4 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigCbs OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress policer committed burst size value."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 5 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigEir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress policer EIR value - the excess rate user requests."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 6 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigEbs OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress policer excess burst size value (bytes)."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 7 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigCoupling OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress policer coupling mode."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 8 }
|
|
|
|
genEquipEthernetSwitchEtmPolicerConfigLineComp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress policer line compensation value (bytes)."
|
|
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 9 }
|
|
|
|
|
|
|
|
-- TM Queues configuration
|
|
genEquipEthernetSwitchEtmQueues OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 9}
|
|
|
|
genEquipEthernetSwitchEtmQueuesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmQueuesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of queue sizes."
|
|
::= { genEquipEthernetSwitchEtmQueues 1 }
|
|
|
|
genEquipEthernetSwitchEtmQueuesEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmQueuesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table entry of queue sizes."
|
|
INDEX { genEquipEthernetSwitchEtmQueuesIndex }
|
|
::= { genEquipEthernetSwitchEtmQueuesTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmQueuesEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmQueuesIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmQueuesSize
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmQueuesIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Index to a queue."
|
|
::= { genEquipEthernetSwitchEtmQueuesEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmQueuesSize OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
kbit-0(0),
|
|
kbit-500(1),
|
|
kbit-1000(2),
|
|
kbit-2000(3),
|
|
kbit-4000(4),
|
|
kbit-250(5),
|
|
kbit-3000(6),
|
|
kbit-3500(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Size of queue[i]"
|
|
::= { genEquipEthernetSwitchEtmQueuesEntry 2 }
|
|
|
|
-- TM WRED configuration
|
|
genEquipEthernetSwitchEtmWred OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 10}
|
|
|
|
genEquipEthernetSwitchEtmWredAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling WRED."
|
|
::= { genEquipEthernetSwitchEtmWred 1 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmWredThresholdsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmWredThresholdsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED thresholds per queue."
|
|
::= { genEquipEthernetSwitchEtmWred 2 }
|
|
|
|
genEquipEthernetSwitchEtmWredThresholdsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmWredThresholdsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED entry thresholds per queue."
|
|
INDEX { genEquipEthernetSwitchEtmWredQueuesIndex }
|
|
::= { genEquipEthernetSwitchEtmWredThresholdsTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmWredThresholdsEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmWredQueuesIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmWredThresholdsGreenThLow
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmWredThresholdsGreenThHigh
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmWredThresholdsYellowThLow
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmWredThresholdsYellowThHigh
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmWredQueuesIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED thresholds per queue."
|
|
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmWredThresholdsGreenThLow OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED green low threshold defines the queue level (in Kbits) point
|
|
that the mechanism should start checking if to drop the green frames."
|
|
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmWredThresholdsGreenThHigh OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED green high threshold defines the queue level of occupancy (in Kbits) point that the WRED
|
|
must drop all arriving green colored frames."
|
|
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmWredThresholdsYellowThLow OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED yellow low threshold defines the queue level (in Kbits) point that the mechanism should
|
|
start checking if to drop the yellow frames."
|
|
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 4 }
|
|
|
|
genEquipEthernetSwitchEtmWredThresholdsYellowThHigh OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED yellow high threshold defines the queue level of occupancy (in Kbits) point that the WRED
|
|
must drop all arriving yellow colored frames."
|
|
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 5 }
|
|
|
|
genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED green max drop threshold the probability to drop frame at the green high threshold (in percent based units)."
|
|
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 6 }
|
|
|
|
genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED yellow max drop threshold the probability to drop frame at the yellow high threshold (in percent based units)."
|
|
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 7 }
|
|
|
|
|
|
-- TM Marker configurations
|
|
genEquipEthernetSwitchEtmMarker OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 11}
|
|
|
|
genEquipEthernetSwitchEtmMarkerAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling/Disabling marking of VLAN P-bits and DEI/CFI bit at the egress."
|
|
::= { genEquipEthernetSwitchEtmMarker 1 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmMarkerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmMarkerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of CoS and color to Pbits and DEI marking for S-VALNS."
|
|
::= { genEquipEthernetSwitchEtmMarker 2 }
|
|
|
|
genEquipEthernetSwitchEtmMarkerEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmMarkerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of CoS and color to Pbits and DEI marking for S-VALNS."
|
|
INDEX { genEquipEthernetSwitchEtmMarkerCoS,
|
|
genEquipEthernetSwitchEtmMarkerColor
|
|
}
|
|
::= { genEquipEthernetSwitchEtmMarkerTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmMarkerEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmMarkerCoS
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmMarkerColor
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmMarkerPbit
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmMarkerCfi
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmMarkerCoS OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS value as was mapped by the TM calssifier."
|
|
::= { genEquipEthernetSwitchEtmMarkerEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmMarkerColor OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color value as was mapped by the TM calssifier."
|
|
::= { genEquipEthernetSwitchEtmMarkerEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmMarkerPbit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN 802.1p P-bit value to be modified."
|
|
::= { genEquipEthernetSwitchEtmMarkerEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmMarkerCfi OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN CFI/DEI value to be modified."
|
|
::= { genEquipEthernetSwitchEtmMarkerEntry 4 }
|
|
|
|
|
|
-- TM Scheduler configuration
|
|
genEquipEthernetSwitchEtmScheduler OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 12}
|
|
|
|
genEquipEthernetSwitchEtmSchedulerQuantum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WFQ Quantum for credit calculation in bytes (64, 128, 256, 512)."
|
|
::= { genEquipEthernetSwitchEtmScheduler 1 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmSchedulerConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmSchedulerConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table for scheduler configuration: priority and weight for each queue."
|
|
::= { genEquipEthernetSwitchEtmScheduler 2 }
|
|
|
|
genEquipEthernetSwitchEtmSchedulerConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmSchedulerConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table entry for scheduler configuration: priority and weight for each queue."
|
|
INDEX { genEquipEthernetSwitchEtmSchedulerConfigQueueIndex }
|
|
::= { genEquipEthernetSwitchEtmSchedulerConfigTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmSchedulerConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmSchedulerConfigQueueIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmSchedulerConfigPriority
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmSchedulerConfigWeight
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmSchedulerConfigQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"queue index."
|
|
::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmSchedulerConfigPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Strict priority of each queue. 4=highest , 1=lowest."
|
|
::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmSchedulerConfigWeight OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WFQ Weights for each queue"
|
|
::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 3 }
|
|
|
|
-- TM Egress shaper configuration
|
|
genEquipEthernetSwitchEtmShaper OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 13}
|
|
|
|
genEquipEthernetSwitchEtmShaperGlobalAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global Shaper admin disables/enables the global shaping feature."
|
|
::= { genEquipEthernetSwitchEtmShaper 1 }
|
|
|
|
genEquipEthernetSwitchEtmShaperConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmShaperConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of shapers' configurations. Each shaper is on the egress of a queue.."
|
|
::= { genEquipEthernetSwitchEtmShaper 2 }
|
|
|
|
genEquipEthernetSwitchEtmShaperConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchEtmShaperConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table entry of shapers' configurations. Each shaper is on the egress of a queue.."
|
|
INDEX { genEquipEthernetSwitchEtmShaperConfigIndex }
|
|
::= { genEquipEthernetSwitchEtmShaperConfigTable 1 }
|
|
|
|
GenEquipEthernetSwitchEtmShaperConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchEtmShaperConfigIndex
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmShaperConfigAdmin
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmShaperConfigCir
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmShaperConfigCbs
|
|
INTEGER,
|
|
genEquipEthernetSwitchEtmShaperConfigLineComp
|
|
INTEGER
|
|
}
|
|
|
|
genEquipEthernetSwitchEtmShaperConfigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"queue index."
|
|
::= { genEquipEthernetSwitchEtmShaperConfigEntry 1 }
|
|
|
|
genEquipEthernetSwitchEtmShaperConfigAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress Shaper admin disables/enables the shaping feature per queue."
|
|
::= { genEquipEthernetSwitchEtmShaperConfigEntry 2 }
|
|
|
|
genEquipEthernetSwitchEtmShaperConfigCir OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress shaper CIR value - the committed rate as given by the user."
|
|
::= { genEquipEthernetSwitchEtmShaperConfigEntry 3 }
|
|
|
|
genEquipEthernetSwitchEtmShaperConfigCbs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress shaper committed burst size value."
|
|
::= { genEquipEthernetSwitchEtmShaperConfigEntry 4 }
|
|
|
|
genEquipEthernetSwitchEtmShaperConfigLineComp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress shaper line compensation value transmitted IFG + Preamble.
|
|
The shaper adds this value to each arriving frame size."
|
|
::= { genEquipEthernetSwitchEtmShaperConfigEntry 5 }
|
|
|
|
-- TM Statistics counters
|
|
genEquipEthernetSwitchEtmStatistics OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 14}
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortTotalBytesTransmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of bytes transmitted via the port (goes into PM)."
|
|
::= { genEquipEthernetSwitchEtmStatistics 1 }
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortTotalUnicastFramesTransmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TThe number of Unicast frames transmitted to the radio port.."
|
|
::= { genEquipEthernetSwitchEtmStatistics 2 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortTotalMulticastFramesTransmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Multicast frames transmitted to the radio port.."
|
|
::= { genEquipEthernetSwitchEtmStatistics 3 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortTotalBroadcastFramesTransmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Broadcast frames transmitted to the radio port.."
|
|
::= { genEquipEthernetSwitchEtmStatistics 4 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortFrames64octTransmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of frames transmitted with a length of exactly 64 Octets."
|
|
::= { genEquipEthernetSwitchEtmStatistics 5 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortFrames65to127Transmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of frames transmitted with a length of 65-127 Octets."
|
|
::= { genEquipEthernetSwitchEtmStatistics 6 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortFrames128to255Transmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of frames transmitted with a length of 128-255 Octets."
|
|
::= { genEquipEthernetSwitchEtmStatistics 7 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortFrames256to511Transmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of frames transmitted with a length of 256-511 Octets)."
|
|
::= { genEquipEthernetSwitchEtmStatistics 8 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortFrames512to1023Transmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TThe total number of frames transmitted with a length of 512-1023 Octets."
|
|
::= { genEquipEthernetSwitchEtmStatistics 9 }
|
|
|
|
|
|
genEquipEthernetSwitchEtmStatisticsPortFrames1024toMtuTransmitted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of frames transmitted with a length between 1024 and MaxTransmitSize Octets."
|
|
::= { genEquipEthernetSwitchEtmStatistics 10 }
|
|
|
|
|
|
|
|
-- IP Pbits to Queue
|
|
genEquipEthernetSwitchQoSIPPbits OBJECT IDENTIFIER ::= {genEquipEthernetSwitchQoS 4}
|
|
|
|
genEquipEthernetSwitchQoSIPPbitsIPPrio OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipPrecedence(0),
|
|
ipv4TOSIPv6(1) -- diffserv.
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP priority options."
|
|
::= { genEquipEthernetSwitchQoSIPPbits 1 }
|
|
|
|
genEquipEthernetSwitchQoSIPPbitsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSIPPbitsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mapping of IP pbits to Queue."
|
|
::= { genEquipEthernetSwitchQoSIPPbits 2 }
|
|
|
|
genEquipEthernetSwitchQoSIPPbitsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchQoSIPPbitsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mapping of IP pbits to Queue."
|
|
INDEX { genEquipEthernetSwitchQoSIPPbitsId }
|
|
::= { genEquipEthernetSwitchQoSIPPbitsTable 1 }
|
|
|
|
GenEquipEthernetSwitchQoSIPPbitsEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchQoSIPPbitsId
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSIPPbitsQueue
|
|
QueueName
|
|
}
|
|
|
|
genEquipEthernetSwitchQoSIPPbitsId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The pbit number."
|
|
::= { genEquipEthernetSwitchQoSIPPbitsEntry 1 }
|
|
|
|
genEquipEthernetSwitchQoSIPPbitsQueue OBJECT-TYPE
|
|
SYNTAX QueueName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"the queue for that pbit."
|
|
::= { genEquipEthernetSwitchQoSIPPbitsEntry 2 }
|
|
|
|
|
|
|
|
-- VLAN Pbits to queue
|
|
|
|
genEquipEthernetSwitchQoSVLANPbitsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSVLANPbitsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN pbit to queue mapping table."
|
|
::= { genEquipEthernetSwitchQoS 5 }
|
|
|
|
genEquipEthernetSwitchQoSVLANPbitsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchQoSVLANPbitsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN pbit to queue mapping table."
|
|
INDEX { genEquipEthernetSwitchQoSVLANPbitsId }
|
|
::= { genEquipEthernetSwitchQoSVLANPbitsTable 1 }
|
|
|
|
GenEquipEthernetSwitchQoSVLANPbitsEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchQoSVLANPbitsId
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSVLANPbitsQueue
|
|
QueueName
|
|
}
|
|
|
|
genEquipEthernetSwitchQoSVLANPbitsId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VLAN'S pbit (index of the table)"
|
|
::= { genEquipEthernetSwitchQoSVLANPbitsEntry 1 }
|
|
|
|
genEquipEthernetSwitchQoSVLANPbitsQueue OBJECT-TYPE
|
|
SYNTAX QueueName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The mapped queue for the corresponding VLAN ."
|
|
::= { genEquipEthernetSwitchQoSVLANPbitsEntry 2 }
|
|
|
|
|
|
-- Queue Weights
|
|
genEquipEthernetSwitchQoSQueueWeightsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSQueueWeightsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Queue weights mapping table."
|
|
::= { genEquipEthernetSwitchQoS 6 }
|
|
|
|
genEquipEthernetSwitchQoSQueueWeightsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchQoSQueueWeightsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Queue weights mapping table."
|
|
INDEX { genEquipEthernetSwitchQoSQueueWeightsId }
|
|
::= { genEquipEthernetSwitchQoSQueueWeightsTable 1 }
|
|
|
|
GenEquipEthernetSwitchQoSQueueWeightsEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchQoSQueueWeightsId
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSQueueWeightsQueue
|
|
QueueName,
|
|
genEquipEthernetSwitchQoSQueueWeightsWeight
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipEthernetSwitchQoSQueueWeightsId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index for this table."
|
|
::= { genEquipEthernetSwitchQoSQueueWeightsEntry 1 }
|
|
|
|
genEquipEthernetSwitchQoSQueueWeightsQueue OBJECT-TYPE
|
|
SYNTAX QueueName
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The queue number."
|
|
::= { genEquipEthernetSwitchQoSQueueWeightsEntry 2 }
|
|
|
|
genEquipEthernetSwitchQoSQueueWeightsWeight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The weight for the queue"
|
|
::= { genEquipEthernetSwitchQoSQueueWeightsEntry 3 }
|
|
|
|
|
|
|
|
|
|
-- Policer list
|
|
-- Policer Name table
|
|
genEquipEthernetSwitchQoSPolicerNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSPolicerNameEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of configured policers."
|
|
::= { genEquipEthernetSwitchQoS 7 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerNameEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchQoSPolicerNameEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Table of configured policers."
|
|
INDEX { genEquipEthernetSwitchQoSPolicerNameId }
|
|
::= { genEquipEthernetSwitchQoSPolicerNameTable 1 }
|
|
|
|
GenEquipEthernetSwitchQoSPolicerNameEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchQoSPolicerNameId
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSPolicerNameName
|
|
DisplayString,
|
|
genEquipEthernetSwitchQoSPolicerNameRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipEthernetSwitchQoSPolicerNameId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Policer ID"
|
|
::= { genEquipEthernetSwitchQoSPolicerNameEntry 1 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerNameName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Policer name."
|
|
::= { genEquipEthernetSwitchQoSPolicerNameEntry 2 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Policer row status."
|
|
::= { genEquipEthernetSwitchQoSPolicerNameEntry 30 }
|
|
|
|
-- Policer list table
|
|
genEquipEthernetSwitchQoSPolicerListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSPolicerListEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The policer class table list."
|
|
::= { genEquipEthernetSwitchQoS 8 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerListEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchQoSPolicerListEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The policer class table list."
|
|
INDEX { genEquipEthernetSwitchQoSPolicerNameId, genEquipEthernetSwitchQoSPolicerListId }
|
|
::= { genEquipEthernetSwitchQoSPolicerListTable 1 }
|
|
|
|
GenEquipEthernetSwitchQoSPolicerListEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchQoSPolicerListId
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSPolicerListName
|
|
DisplayString,
|
|
genEquipEthernetSwitchQoSPolicerListClassName
|
|
DisplayString,
|
|
genEquipEthernetSwitchQoSPolicerListTrafficType
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSPolicerListCIR
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSPolicerListCBS
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSPolicerListRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipEthernetSwitchQoSPolicerListId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The policer ID."
|
|
::= { genEquipEthernetSwitchQoSPolicerListEntry 1 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The policer class name"
|
|
::= { genEquipEthernetSwitchQoSPolicerListEntry 2 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerListClassName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The policer class name"
|
|
::= { genEquipEthernetSwitchQoSPolicerListEntry 3 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerListTrafficType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknownUcast(1),
|
|
unknowMulticast(2),
|
|
broadcast(3),
|
|
multicast(5),
|
|
unicast(6),
|
|
arp(8),
|
|
tcpData(9),
|
|
tcpControl(10),
|
|
udp(11),
|
|
noTcpUdp(12),
|
|
firstPriority(13),
|
|
secondPriority(14),
|
|
thirdPriority(15),
|
|
forthPriority(16),
|
|
allTraffic(17)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The traffic type that the policer applies to."
|
|
::= { genEquipEthernetSwitchQoSPolicerListEntry 4 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerListCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The CIR (Critical Information Rate) value (in Kbps)"
|
|
::= { genEquipEthernetSwitchQoSPolicerListEntry 5 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerListCBS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The CBS (Critical Burst Size) value (in Bytes)"
|
|
::= { genEquipEthernetSwitchQoSPolicerListEntry 6 }
|
|
|
|
genEquipEthernetSwitchQoSPolicerListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status of the table."
|
|
::= { genEquipEthernetSwitchQoSPolicerListEntry 30 }
|
|
|
|
|
|
-- Static MAC
|
|
genEquipEthernetSwitchQoSStaticMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSStaticMacEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Static MAC forwarding table."
|
|
::= { genEquipEthernetSwitchQoS 9 }
|
|
|
|
genEquipEthernetSwitchQoSStaticMacEntry OBJECT-TYPE
|
|
SYNTAX GenEquipEthernetSwitchQoSStaticMacEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Static MAC forwarding table."
|
|
INDEX { genEquipEthernetSwitchQoSStaticMacId }
|
|
::= { genEquipEthernetSwitchQoSStaticMacTable 1 }
|
|
|
|
GenEquipEthernetSwitchQoSStaticMacEntry ::=
|
|
SEQUENCE {
|
|
genEquipEthernetSwitchQoSStaticMacId
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSStaticMacAddr
|
|
OCTET STRING,
|
|
genEquipEthernetSwitchQoSStaticMacVlanId
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSStaticMacForwardTo
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSStaticMacPriority
|
|
INTEGER,
|
|
genEquipEthernetSwitchQoSStaticMacRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipEthernetSwitchQoSStaticMacId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index of the table"
|
|
::= { genEquipEthernetSwitchQoSStaticMacEntry 1 }
|
|
|
|
genEquipEthernetSwitchQoSStaticMacAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Static MAC Address."
|
|
::= { genEquipEthernetSwitchQoSStaticMacEntry 2 }
|
|
|
|
genEquipEthernetSwitchQoSStaticMacVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN ID for this MAC."
|
|
::= { genEquipEthernetSwitchQoSStaticMacEntry 3 }
|
|
|
|
genEquipEthernetSwitchQoSStaticMacForwardTo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number to be forwarded to, starting from 1."
|
|
::= { genEquipEthernetSwitchQoSStaticMacEntry 4 }
|
|
|
|
genEquipEthernetSwitchQoSStaticMacPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The priority to be given to this MAC address."
|
|
::= { genEquipEthernetSwitchQoSStaticMacEntry 5 }
|
|
|
|
genEquipEthernetSwitchQoSStaticMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The row status of the operation."
|
|
::= { genEquipEthernetSwitchQoSStaticMacEntry 30 }
|
|
|
|
|
|
-- MSTP
|
|
--
|
|
genEquipProtocols OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 6}
|
|
|
|
genEquipProtocolsMstp OBJECT IDENTIFIER ::= {genEquipProtocols 1}
|
|
|
|
--
|
|
-- MSTP General attributes - mstp-general-attributes-table
|
|
--
|
|
|
|
genEquipProtocolsMstpGeneralAttributesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProtocolsMstpGeneralAttributesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing NE configuration and maintenance attributes which are not part of the standard MIB."
|
|
::= { genEquipProtocolsMstp 1 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProtocolsMstpGeneralAttributesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing NE configuration and maintenance attributes which are not part of the standard MIB."
|
|
INDEX { genEquipProtocolsMstpGeneralAttributesComponentId }
|
|
::= { genEquipProtocolsMstpGeneralAttributesTable 1 }
|
|
|
|
GenEquipProtocolsMstpGeneralAttributesEntry ::=
|
|
SEQUENCE {
|
|
genEquipProtocolsMstpGeneralAttributesComponentId
|
|
INTEGER,
|
|
genEquipProtocolsMstpGeneralAttributesMstpEnabled
|
|
TrueFalse,
|
|
genEquipProtocolsMstpGeneralAttributesNumberOfinstances
|
|
INTEGER,
|
|
genEquipProtocolsMstpGeneralAttributesMigrateTime
|
|
INTEGER,
|
|
genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC
|
|
INTEGER,
|
|
genEquipProtocolsMstpGeneralAttributesFrozen
|
|
TrueFalse,
|
|
genEquipProtocolsMstpGeneralAttributesSdHandling
|
|
INTEGER,
|
|
genEquipProtocolsMstpGeneralAttributesReset
|
|
TrueFalse,
|
|
genEquipProtocolsMstpGeneralAttributesResetCounters
|
|
TrueFalse
|
|
}
|
|
|
|
genEquipProtocolsMstpGeneralAttributesComponentId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Distinguished between multiple virtual bridge instances within a PB or PBB. In simple situations, i.e. single component the default is 1"
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 1 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesMstpEnabled OBJECT-TYPE
|
|
SYNTAX TrueFalse
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When set, MSTP protocol is enabled on NE"
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 2 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesNumberOfinstances OBJECT-TYPE
|
|
SYNTAX INTEGER (2..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies number of instances supported. Value ranges from 2 to 16."
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 3 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesMigrateTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When MSTP bridge detects the presence of STP data on one of its ports,
|
|
it migrates after 'MigrateTime' has elapsed, if migrate is enabled."
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 4 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
customer(0),
|
|
provider(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When set to 'customer', BPDU Dest MAC address should be set to 0x0180-C200-0000.
|
|
Otherwise, BPDU Dest MAC address should be set to 0x0180-C200-0008"
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 5 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesFrozen OBJECT-TYPE
|
|
SYNTAX TrueFalse
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When set, MSTP protocol stops running in NE., i.e. BPDU are neither processed nor transmitted.
|
|
All ports states are maintained."
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 6 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesSdHandling OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ignored(0),
|
|
sameAsSF(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When set to 'ignored', SD (Signal Degrade) failures are ignored in MSTP. Otherwise, SD failures are treated same as SF."
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 7 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(0),
|
|
reset(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When set to reset, MSTP Protocol suit is reset"
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 8 }
|
|
|
|
genEquipProtocolsMstpGeneralAttributesResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(0),
|
|
reset(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When set to reset, MSTP counters are reset"
|
|
::= { genEquipProtocolsMstpGeneralAttributesEntry 9 }
|
|
|
|
--
|
|
-- MSTP counters per instance per port - mstp-mstp-port-counters-table
|
|
--
|
|
|
|
genEquipProtocolsMstpCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProtocolsMstpCountersEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing MSTP counters per instance per port."
|
|
::= { genEquipProtocolsMstp 2 }
|
|
|
|
genEquipProtocolsMstpCountersEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProtocolsMstpCountersEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing MSTP counters per instance per port."
|
|
INDEX { genEquipProtocolsMstpCountersPortId }
|
|
::= { genEquipProtocolsMstpCountersTable 1 }
|
|
|
|
GenEquipProtocolsMstpCountersEntry ::=
|
|
SEQUENCE {
|
|
genEquipProtocolsMstpCountersPortId
|
|
INTEGER,
|
|
genEquipProtocolsMstpCountersNumberOfReceivedTCN
|
|
INTEGER,
|
|
genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu
|
|
INTEGER,
|
|
genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu
|
|
INTEGER,
|
|
genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu
|
|
INTEGER,
|
|
genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu
|
|
INTEGER,
|
|
genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu
|
|
INTEGER,
|
|
genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu
|
|
INTEGER,
|
|
genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu
|
|
INTEGER
|
|
}
|
|
|
|
genEquipProtocolsMstpCountersPortId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port ID (ifIndex)"
|
|
::= { genEquipProtocolsMstpCountersEntry 1 }
|
|
|
|
genEquipProtocolsMstpCountersNumberOfReceivedTCN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of received TCN"
|
|
::= { genEquipProtocolsMstpCountersEntry 2 }
|
|
|
|
genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of received Configuration BPDU."
|
|
::= { genEquipProtocolsMstpCountersEntry 3 }
|
|
|
|
genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of received RST BPDU."
|
|
::= { genEquipProtocolsMstpCountersEntry 4 }
|
|
|
|
genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of received MST BPDU"
|
|
::= { genEquipProtocolsMstpCountersEntry 5 }
|
|
|
|
genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number Of Transmitted TCN BPDU."
|
|
::= { genEquipProtocolsMstpCountersEntry 6 }
|
|
|
|
genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of transmitted Configuration BPDU."
|
|
::= { genEquipProtocolsMstpCountersEntry 7 }
|
|
|
|
genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of transmitted RST BPDU"
|
|
::= { genEquipProtocolsMstpCountersEntry 8 }
|
|
|
|
genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of transmitted MST BPDU"
|
|
::= { genEquipProtocolsMstpCountersEntry 9 }
|
|
|
|
|
|
genEquipProtocolsEoam OBJECT IDENTIFIER ::= {genEquipProtocols 2}
|
|
|
|
--
|
|
-- EOAM Configuration and Status - eoam-bw-vsm-table
|
|
--
|
|
|
|
genEquipProtocolsEoamBwVsmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProtocolsEoamBwVsmEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Table containing Ethernet OAM Configuration and Status."
|
|
::= { genEquipProtocolsEoam 1 }
|
|
|
|
genEquipProtocolsEoamBwVsmEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProtocolsEoamBwVsmEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Table entry containing Ethernet OAM Configuration and Status."
|
|
INDEX { genEquipProtocolsEoamBwVsmName }
|
|
::= { genEquipProtocolsEoamBwVsmTable 1 }
|
|
|
|
GenEquipProtocolsEoamBwVsmEntry ::=
|
|
SEQUENCE {
|
|
genEquipProtocolsEoamBwVsmName
|
|
DisplayString,
|
|
genEquipProtocolsEoamBwVsmAdmin
|
|
Dot1CfmInterfaceStatus,
|
|
genEquipProtocolsEoamBwVsmPeriod
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmCurrentBw
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmControlIfindex
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmId
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmMonitoredIfindex
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmHoldoff
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmHoldoffStartTime
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmHoldoffState
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmLastSentMsg
|
|
OCTET STRING,
|
|
genEquipProtocolsEoamBwVsmMel
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmMonitoringInterval
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmNominalBw
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmTxMsgCounter
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmVersion
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmVlan
|
|
INTEGER,
|
|
genEquipProtocolsEoamBwVsmResetMsgCounter
|
|
OffOn,
|
|
genEquipProtocolsEoamBwVsmRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipProtocolsEoamBwVsmName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of EOAM entity"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 1 }
|
|
|
|
genEquipProtocolsEoamBwVsmAdmin OBJECT-TYPE
|
|
SYNTAX Dot1CfmInterfaceStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Eoam Admin. Possible valuew: Up, Down"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 2 }
|
|
|
|
genEquipProtocolsEoamBwVsmPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interval of transmitting messages, when current nominal."
|
|
::= { genEquipProtocolsEoamBwVsmEntry 3 }
|
|
|
|
genEquipProtocolsEoamBwVsmCurrentBw OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Current BW measure by 4 samples (with 250msec interval)"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 4 }
|
|
|
|
genEquipProtocolsEoamBwVsmControlIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Control Interface of the eoam entity"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 5 }
|
|
|
|
genEquipProtocolsEoamBwVsmId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"EOAM index."
|
|
::= { genEquipProtocolsEoamBwVsmEntry 6 }
|
|
|
|
genEquipProtocolsEoamBwVsmMonitoredIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Monitored Interface of the eoam entity"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 7 }
|
|
|
|
genEquipProtocolsEoamBwVsmHoldoff OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The holdoff time in which, if BW below nominal, a message is sent"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 8 }
|
|
|
|
genEquipProtocolsEoamBwVsmHoldoffStartTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The holdoff start counting time"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 9 }
|
|
|
|
genEquipProtocolsEoamBwVsmHoldoffState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The holdoff state of the EOAM entity"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 10 }
|
|
|
|
genEquipProtocolsEoamBwVsmLastSentMsg OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The last EOAM message transmitted"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 11 }
|
|
|
|
genEquipProtocolsEoamBwVsmMel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MEL to be set in the bw-vsm messages"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 12 }
|
|
|
|
genEquipProtocolsEoamBwVsmMonitoringInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The monitoring interval of the average BE calculation"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 13 }
|
|
|
|
genEquipProtocolsEoamBwVsmNominalBw OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The nominal BW of the monitored interface, to be set in the bw-vsm messages"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 14 }
|
|
|
|
genEquipProtocolsEoamBwVsmTxMsgCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of transmitted messages"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 15 }
|
|
|
|
genEquipProtocolsEoamBwVsmVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"EOAM version used"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 16 }
|
|
|
|
genEquipProtocolsEoamBwVsmVlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VLAN to be set in the bw-vsm messages"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 17 }
|
|
|
|
genEquipProtocolsEoamBwVsmResetMsgCounter OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reset Messages Counter"
|
|
::= { genEquipProtocolsEoamBwVsmEntry 18 }
|
|
|
|
genEquipProtocolsEoamBwVsmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProtocolsEoamBwVsmEntry 30 }
|
|
|
|
|
|
genEquipProtocolsG8032Erpi OBJECT IDENTIFIER ::= {genEquipProtocols 3}
|
|
|
|
--
|
|
-- G8032 ERPI attributes - g8032-erpi-attributes-table
|
|
--
|
|
|
|
genEquipProtocols8032DestMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"G8032 (Resiliency protocol) destination MAC address"
|
|
::= { genEquipProtocolsG8032Erpi 1 }
|
|
|
|
genEquipProtocolsG8032NodeId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(10))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"G.8032 Node ID"
|
|
::= { genEquipProtocolsG8032Erpi 2 }
|
|
|
|
--
|
|
--
|
|
genEquipProtocolsG8032ErpiAttributesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProtocolsG8032ErpiAttributesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing ERPI attributes."
|
|
::= { genEquipProtocolsG8032Erpi 10 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProtocolsG8032ErpiAttributesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table entry containing ERPI attributes."
|
|
INDEX { genEquipProtocolsG8032ErpiAttributesErpiId }
|
|
::= { genEquipProtocolsG8032ErpiAttributesTable 1 }
|
|
|
|
GenEquipProtocolsG8032ErpiAttributesEntry ::=
|
|
SEQUENCE {
|
|
genEquipProtocolsG8032ErpiAttributesErpiId
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesErpiName
|
|
DisplayString,
|
|
genEquipProtocolsG8032ErpiAttributesGuardTime
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesHoldoffTime
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesLastChangeTs
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesLastHpRequest
|
|
G8032LastState,
|
|
genEquipProtocolsG8032ErpiAttributesLastLocalState
|
|
G8032LastState,
|
|
genEquipProtocolsG8032ErpiAttributesLastRemoteState
|
|
G8032LastState,
|
|
genEquipProtocolsG8032ErpiAttributesMegLevel
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesDownMep
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesRevertive
|
|
IfMgrTrueFalse,
|
|
genEquipProtocolsG8032ErpiAttributesRingState
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesRplOwner
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesSdHandling
|
|
IfMgrTrueFalse,
|
|
genEquipProtocolsG8032ErpiAttributesServiceId
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesErpiType
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesVersion
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesVirtualChannel
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesWtr
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiAttributesRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipProtocolsG8032ErpiAttributesErpiId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ERPI ID"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 1 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesErpiName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ERPI Name"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 2 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesGuardTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the ERPI Guard Time; units are msec, steps are 10msec."
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 3 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesHoldoffTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ERPI holdoff Time; units are msec, steps are 100msec.
|
|
Controls the time from failure detection to responding to failure"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 4 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesLastChangeTs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Denotes the Timestamp of the last ring state machine transition"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 5 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesLastHpRequest OBJECT-TYPE
|
|
SYNTAX G8032LastState
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Describes the last high-priority request."
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 6 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesLastLocalState OBJECT-TYPE
|
|
SYNTAX G8032LastState
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Describes the current local state that is input to the ERPI state machine"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 7 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesLastRemoteState OBJECT-TYPE
|
|
SYNTAX G8032LastState
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Describes the last event received from the far end"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 8 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesMegLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates MEG LEVEL, when interoperating with SOAM"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 9 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesDownMep OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates if the ERPI is related to a down MEP and if to which one"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 10 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesRevertive OBJECT-TYPE
|
|
SYNTAX IfMgrTrueFalse
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the ERPI is revertive"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 11 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesRingState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Describes the state in which id ERPI is assumed.
|
|
Possible states are: Initializing, Idle, Pending, Protecting, FS, MS)"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 12 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesRplOwner OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
west(1),
|
|
east(2),
|
|
sub-ring(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the ERPI is RPL owner and if such, which ERPI Port is the owner"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 13 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesSdHandling OBJECT-TYPE
|
|
SYNTAX IfMgrTrueFalse
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation)"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 14 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesServiceId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates Service ID of the ERPI"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 15 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesErpiType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ring(0),
|
|
sub-ring(1),
|
|
ring-with-sub-ring(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ERPI Type ( ring / sub-ring / ring with sub-ring port)"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 16 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the ERPI version number used in the ERPI protocol"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 17 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesVirtualChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN of virtual channel; 0 denotes no virtual channel"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 18 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesWtr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the ERPI WTR; units are minutes"
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 19 }
|
|
|
|
genEquipProtocolsG8032ErpiAttributesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProtocolsG8032ErpiAttributesEntry 30 }
|
|
|
|
|
|
--
|
|
-- G8032 ERP port attributes - g8032-erpi-port-attributes-table
|
|
--
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProtocolsG8032ErpiPortAttributesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing ERP port attributes."
|
|
::= { genEquipProtocolsG8032Erpi 11 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProtocolsG8032ErpiPortAttributesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table entry containing ERP port attributes."
|
|
INDEX { genEquipProtocolsG8032ErpiPortAttributesErpiId,
|
|
genEquipProtocolsG8032ErpiPortAttributesErpiIfindex}
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesTable 1 }
|
|
|
|
GenEquipProtocolsG8032ErpiPortAttributesEntry ::=
|
|
SEQUENCE {
|
|
genEquipProtocolsG8032ErpiPortAttributesErpiId
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesErpiIfindex
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesActiveState
|
|
IfMgrTrueFalse,
|
|
genEquipProtocolsG8032ErpiPortAttributesDataFwdState
|
|
IfMgrTrueFalse,
|
|
genEquipProtocolsG8032ErpiPortAttributesDefectState
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState
|
|
IfMgrTrueFalse,
|
|
genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState
|
|
IfMgrTrueFalse,
|
|
genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesFs
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesMs
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesNr
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesRb
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesSd
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesSf
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesSpId
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol
|
|
IfMgrTrueFalse,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsFs
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsMs
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsNr
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsRb
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsSd
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsSf
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesClearCommand
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesRowStatus
|
|
RowStatus,
|
|
genEquipProtocolsG8032ErpiPortAttributesFsCommand
|
|
INTEGER,
|
|
genEquipProtocolsG8032ErpiPortAttributesMsCommand
|
|
INTEGER,
|
|
}
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesErpiId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Denotes the ERPI ID"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 1 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesErpiIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"g8032_erp_port_sp_index"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 2 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesActiveState OBJECT-TYPE
|
|
SYNTAX IfMgrTrueFalse
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Denotes if G8032 port (SP) is active for traffic forwarding or not"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 3 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesDataFwdState OBJECT-TYPE
|
|
SYNTAX IfMgrTrueFalse
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the port is forwarding or blocking data"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 4 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesDefectState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no-defect(0),
|
|
sd-defect(1),
|
|
sf-defect(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Defines the ERPI Port Oper-state derived from port. It is updates when Oper-state is changed."
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 5 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState OBJECT-TYPE
|
|
SYNTAX IfMgrTrueFalse
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the port is forwarding or blocking raps frames"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 6 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState OBJECT-TYPE
|
|
SYNTAX IfMgrTrueFalse
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the RPL is in blocking state. relevant only for RPL owner"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 7 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of invalid R-APS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 8 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of events R-APS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 9 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of R-APS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 10 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesFs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of FS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 11 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesMs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of MS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 12 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesNr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of NR R-APS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 13 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesRb OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of RB R-APS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 14 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesSd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of SD R-APS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 15 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesSf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of SF R-APS PDU received"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 17 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The capacity degradation threshold, in percentage,
|
|
from which SD is indicated from this ERPI Port"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 18 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesSpId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point ID"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 19 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol OBJECT-TYPE
|
|
SYNTAX IfMgrTrueFalse
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When value is False, R-APS are not transmitted by ERPI Port"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 20 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of events R-APS PDU transmitted"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 21 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of Total R-APS PDU transmitted"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 22 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsFs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of FS R-APS PDU transmitted"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 23 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsMs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of MS R-APS PDU transmitted"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 24 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsNr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of NR R-APS PDU transmitted"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 25 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsRb OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of RB R-APS PDU transmitted"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 26 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsSd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of SD R-APS PDU transmitted"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 27 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesTxRapsSf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of SF R-APS PDU transmitted"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 28 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesClearCommand OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clear Command"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 29 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 30 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesFsCommand OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Force Switch (FS)"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 31 }
|
|
|
|
genEquipProtocolsG8032ErpiPortAttributesMsCommand OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Manual Switch (MS)"
|
|
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 32 }
|
|
|
|
genEquipProtocolsSoam OBJECT IDENTIFIER ::= {genEquipProtocols 4}
|
|
|
|
--
|
|
-- SOAM MEP Table - dot1ag-cfm-mep-table
|
|
--
|
|
|
|
genEquipProtocolsSoamMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProtocolsSoamMepEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containg MEP attributes."
|
|
::= { genEquipProtocolsSoam 10 }
|
|
|
|
genEquipProtocolsSoamMepEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProtocolsSoamMepEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table entry containg MEP attributes."
|
|
INDEX { genEquipProtocolsSoamMepMdIndex, genEquipProtocolsSoamMepMaIndex, genEquipProtocolsSoamMepMepIndentifier }
|
|
::= { genEquipProtocolsSoamMepTable 1 }
|
|
|
|
GenEquipProtocolsSoamMepEntry ::=
|
|
SEQUENCE {
|
|
genEquipProtocolsSoamMepMdIndex
|
|
INTEGER,
|
|
genEquipProtocolsSoamMepMaIndex
|
|
INTEGER,
|
|
genEquipProtocolsSoamMepMepIndentifier
|
|
INTEGER,
|
|
genEquipProtocolsSoamMepSpId
|
|
INTEGER,
|
|
genEquipProtocolsSoamMepLastSessionLbmOut
|
|
INTEGER,
|
|
genEquipProtocolsSoamMepLastSessionlbmToSend
|
|
INTEGER,
|
|
genEquipProtocolsSoamMepLastSessionLbrIn
|
|
INTEGER,
|
|
genEquipProtocolsSoamMepLastSessionlbState
|
|
LBState,
|
|
genEquipProtocolsSoamMepLbmOut
|
|
INTEGER
|
|
}
|
|
|
|
genEquipProtocolsSoamMepMdIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MD Index"
|
|
::= { genEquipProtocolsSoamMepEntry 1 }
|
|
|
|
genEquipProtocolsSoamMepMaIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MA/MEG Index"
|
|
::= { genEquipProtocolsSoamMepEntry 2 }
|
|
|
|
genEquipProtocolsSoamMepMepIndentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MEP ID"
|
|
::= { genEquipProtocolsSoamMepEntry 3 }
|
|
|
|
genEquipProtocolsSoamMepSpId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point ID"
|
|
::= { genEquipProtocolsSoamMepEntry 4 }
|
|
|
|
genEquipProtocolsSoamMepLastSessionLbmOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of LBM frames transmitted during the current/last session"
|
|
::= { genEquipProtocolsSoamMepEntry 5 }
|
|
|
|
genEquipProtocolsSoamMepLastSessionlbmToSend OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of LBM frames left to send in the session"
|
|
::= { genEquipProtocolsSoamMepEntry 6 }
|
|
|
|
genEquipProtocolsSoamMepLastSessionLbrIn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of LBR messages received during the current/last session"
|
|
::= { genEquipProtocolsSoamMepEntry 7 }
|
|
|
|
genEquipProtocolsSoamMepLastSessionlbState OBJECT-TYPE
|
|
SYNTAX LBState
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the loopback session State"
|
|
::= { genEquipProtocolsSoamMepEntry 8 }
|
|
|
|
genEquipProtocolsSoamMepLbmOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the mumber of the LBM frames transmitted"
|
|
::= { genEquipProtocolsSoamMepEntry 9 }
|
|
|
|
--
|
|
-- SOAM MA/MEG Network Table - dot1ag-cfm-ma-mef-net-table
|
|
--
|
|
|
|
genEquipProtocolsSoamMegTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProtocolsSoamMegEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing SOAM MA/MEG network identical attributes common to 802.1ag."
|
|
::= { genEquipProtocolsSoam 11 }
|
|
|
|
genEquipProtocolsSoamMegEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProtocolsSoamMegEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table entry containing SOAM MA/MEG network identical attributes common to 802.1ag."
|
|
INDEX { genEquipProtocolsSoamMegMdIndex, genEquipProtocolsSoamMegMaIndex }
|
|
::= { genEquipProtocolsSoamMegTable 1 }
|
|
|
|
GenEquipProtocolsSoamMegEntry ::=
|
|
SEQUENCE {
|
|
genEquipProtocolsSoamMegMdIndex
|
|
INTEGER,
|
|
genEquipProtocolsSoamMegMaIndex
|
|
INTEGER,
|
|
genEquipProtocolsSoamMegServiceId
|
|
INTEGER
|
|
}
|
|
|
|
genEquipProtocolsSoamMegMdIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MD Index"
|
|
::= { genEquipProtocolsSoamMegEntry 1 }
|
|
|
|
genEquipProtocolsSoamMegMaIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MA/MEG Index"
|
|
::= { genEquipProtocolsSoamMegEntry 2 }
|
|
|
|
genEquipProtocolsSoamMegServiceId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service ID"
|
|
::= { genEquipProtocolsSoamMegEntry 3 }
|
|
|
|
|
|
-- TDM Trails
|
|
genEquipTdmTrails OBJECT IDENTIFIER ::= {genEquipServices 2}
|
|
|
|
genEquipTdmTrailsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTdmTrailsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM Trails configuration and status table."
|
|
::= { genEquipTdmTrails 1 }
|
|
|
|
genEquipTdmTrailsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTdmTrailsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM Trails PM table."
|
|
INDEX { genEquipTdmTrailID }
|
|
::= { genEquipTdmTrailsTable 1 }
|
|
|
|
GenEquipTdmTrailsEntry ::=
|
|
SEQUENCE {
|
|
genEquipTdmTrailID
|
|
DisplayString,
|
|
genEquipTdmTrailDescr
|
|
DisplayString,
|
|
genEquipTdmTrailProtected
|
|
INTEGER,
|
|
genEquipTdmTrailAcmPrio
|
|
INTEGER,
|
|
genEquipTdmTrailOperStatus
|
|
INTEGER,
|
|
genEquipTdmTrailAlarmStatus
|
|
INTEGER,
|
|
genEquipTdmTrailSrcSlot
|
|
INTEGER,
|
|
genEquipTdmTrailSrcType
|
|
TrailIfType,
|
|
genEquipTdmTrailSrcNum
|
|
INTEGER,
|
|
genEquipTdmTrailDest1Slot
|
|
INTEGER,
|
|
genEquipTdmTrailDest1Type
|
|
TrailIfType,
|
|
genEquipTdmTrailDest1Num
|
|
INTEGER,
|
|
genEquipTdmTrailDest2Slot
|
|
INTEGER,
|
|
genEquipTdmTrailDest2Type
|
|
TrailIfType,
|
|
genEquipTdmTrailDest2Num
|
|
INTEGER,
|
|
genEquipTdmTrailProtectedForceActive
|
|
TrailProtectedType,
|
|
genEquipTdmTrailProtectedActiveTrail
|
|
TrailProtectedType,
|
|
genEquipTdmTrailProtectedNumOfSwitches
|
|
INTEGER,
|
|
genEquipTdmTrailPrimaryPathAlarmStatus
|
|
INTEGER,
|
|
genEquipTdmTrailSecondaryPathAlarmStatus
|
|
INTEGER,
|
|
genEquipTdmTrailRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipTdmTrailID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Trail ID. This parameter is the index of the table."
|
|
::= { genEquipTdmTrailsEntry 1 }
|
|
|
|
genEquipTdmTrailDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trail description."
|
|
::= { genEquipTdmTrailsEntry 2 }
|
|
|
|
genEquipTdmTrailProtected OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unProtected(0),
|
|
protected(1),
|
|
protectedAbr(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter indicates whether the trail is protected or not."
|
|
::= { genEquipTdmTrailsEntry 3 }
|
|
|
|
genEquipTdmTrailAcmPrio OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(0),
|
|
high(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ACM priority of the trail. In case of High priority TDM trail, ACM is enabled on the link and there is a reduction
|
|
of the link capacity, this trail will be prioritized before the low priority trails to be dropped."
|
|
::= { genEquipTdmTrailsEntry 4 }
|
|
|
|
genEquipTdmTrailOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reserved(0),
|
|
operational(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of the TDM trail. in operational case, the trail is active/enabled and send alarms."
|
|
::= { genEquipTdmTrailsEntry 5 }
|
|
|
|
genEquipTdmTrailAlarmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The alarm status of the trail active path.
|
|
The value is a Bit Map: Id-Mismatch(0x01),
|
|
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
|
|
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
|
|
::= { genEquipTdmTrailsEntry 6 }
|
|
|
|
genEquipTdmTrailSrcSlot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trail source slot number."
|
|
::= { genEquipTdmTrailsEntry 7 }
|
|
|
|
genEquipTdmTrailSrcType OBJECT-TYPE
|
|
SYNTAX TrailIfType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of the source interface of the trail line(0), radio(1),stm-1-oc-3(2), sync(4)."
|
|
::= { genEquipTdmTrailsEntry 8 }
|
|
|
|
genEquipTdmTrailSrcNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface number, for example E1 number 5. in case of a line."
|
|
::= { genEquipTdmTrailsEntry 9 }
|
|
|
|
genEquipTdmTrailDest1Slot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The slot destination of the trail."
|
|
::= { genEquipTdmTrailsEntry 10 }
|
|
|
|
genEquipTdmTrailDest1Type OBJECT-TYPE
|
|
SYNTAX TrailIfType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface type destination of the trail."
|
|
::= { genEquipTdmTrailsEntry 11 }
|
|
|
|
genEquipTdmTrailDest1Num OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The destination interface number."
|
|
::= { genEquipTdmTrailsEntry 12 }
|
|
|
|
genEquipTdmTrailDest2Slot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A secondary slot number that is being used when protection is enabled. "
|
|
::= { genEquipTdmTrailsEntry 13 }
|
|
|
|
genEquipTdmTrailDest2Type OBJECT-TYPE
|
|
SYNTAX TrailIfType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A secondary interface type that is being used when protection is enabled."
|
|
::= { genEquipTdmTrailsEntry 14 }
|
|
|
|
genEquipTdmTrailDest2Num OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A secondary interface number that is being used when protection is enabled."
|
|
::= { genEquipTdmTrailsEntry 15 }
|
|
|
|
genEquipTdmTrailProtectedForceActive OBJECT-TYPE
|
|
SYNTAX TrailProtectedType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Force active of the primary or the secondary trails."
|
|
::= { genEquipTdmTrailsEntry 16 }
|
|
|
|
genEquipTdmTrailProtectedActiveTrail OBJECT-TYPE
|
|
SYNTAX TrailProtectedType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The trail current active path. That tells us Who is the active trail."
|
|
::= { genEquipTdmTrailsEntry 17 }
|
|
|
|
genEquipTdmTrailProtectedNumOfSwitches OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value represent the number of switches in SNCP between the primary and secondary trails.
|
|
Setting this value to 0, clears this counter"
|
|
::= { genEquipTdmTrailsEntry 18 }
|
|
|
|
genEquipTdmTrailPrimaryPathAlarmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The alarm status of the trail primary path.
|
|
The value is a Bit Map: Id-Mismatch(0x01),
|
|
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
|
|
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
|
|
::= { genEquipTdmTrailsEntry 19 }
|
|
|
|
genEquipTdmTrailSecondaryPathAlarmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The alarm status of the trail secondary path.
|
|
The value is a Bit Map: Id-Mismatch(0x01),
|
|
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
|
|
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
|
|
::= { genEquipTdmTrailsEntry 20 }
|
|
|
|
genEquipTdmTrailRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Row status of the entry."
|
|
::= { genEquipTdmTrailsEntry 30 }
|
|
|
|
-- Protected trail force active all trails command
|
|
genEquipTdmTrailsProtectedForceActiveAllCmd OBJECT-TYPE
|
|
SYNTAX TrailProtectedType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Force all active trails to be either primary or secondary."
|
|
::= { genEquipTdmTrails 2 }
|
|
|
|
-- Protected trail force operational or reserved all trails command
|
|
genEquipTdmTrailsProtectedForceOperationalOrReservedCmd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reserved(0),
|
|
operational(1),
|
|
idle(30)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Force all active trails to be either operational or reserved."
|
|
::= { genEquipTdmTrails 3 }
|
|
|
|
genEquipTdmTrailsProtectedRevertiveSwitchTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1800)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The revertive switch timeout in seconds for revertive protected trails."
|
|
::= { genEquipTdmTrails 4 }
|
|
|
|
genEquipTdmTrailsSwitchCounterClear OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter will clear the counter for protected switches."
|
|
::= { genEquipTdmTrails 5 }
|
|
|
|
genEquipTdmTrailsDeleteAllTrails OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter will delete all existing trails."
|
|
::= { genEquipTdmTrails 6 }
|
|
|
|
-- Synchronization
|
|
genEquipSynchronization OBJECT IDENTIFIER ::= {genEquipServices 3}
|
|
|
|
genEquipSynchronizationSrcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipSynchronizationSrcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Synchronization source table."
|
|
::= { genEquipSynchronization 1 }
|
|
|
|
genEquipSynchronizationSrcEntry OBJECT-TYPE
|
|
SYNTAX GenEquipSynchronizationSrcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Synchronization source table."
|
|
INDEX { genEquipSynchronizationSrcPriority }
|
|
::= { genEquipSynchronizationSrcTable 1 }
|
|
|
|
GenEquipSynchronizationSrcEntry ::=
|
|
SEQUENCE {
|
|
genEquipSynchronizationSrcPriority
|
|
INTEGER,
|
|
genEquipSynchronizationSrcSlot
|
|
INTEGER,
|
|
genEquipSynchronizationSrcType
|
|
INTEGER,
|
|
genEquipSynchronizationSrcNum
|
|
INTEGER,
|
|
genEquipSynchronizationSrcValid
|
|
INTEGER,
|
|
genEquipSynchronizationSrcTrail
|
|
EnableDisable,
|
|
genEquipSynchronizationSrcAdmin
|
|
EnableDisable,
|
|
genEquipSynchronizationSrcQuality
|
|
INTEGER,
|
|
genEquipSynchronizationSrcReceivedSSM
|
|
INTEGER,
|
|
genEquipSynchronizationSrcQualityStatus
|
|
INTEGER
|
|
|
|
}
|
|
|
|
genEquipSynchronizationSrcPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source for system synchronization (primary, seconday)."
|
|
::= { genEquipSynchronizationSrcEntry 1 }
|
|
|
|
genEquipSynchronizationSrcSlot OBJECT-TYPE
|
|
SYNTAX SlotId
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The slot number of the sync source (1..6).
|
|
Possible values:
|
|
- standalone(0)
|
|
- slot1(1)
|
|
- slot2(2)
|
|
- slot3(3)
|
|
- slot4(4)
|
|
- slot5(5)
|
|
- slot6(6)"
|
|
::= { genEquipSynchronizationSrcEntry 2 }
|
|
|
|
genEquipSynchronizationSrcType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(-1),
|
|
line(0),
|
|
radio-ch(1),
|
|
stm-vc(2),
|
|
pw(3),
|
|
stm-signal(4),
|
|
ether(5),
|
|
pw-reference-clock(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface type (line (PDH), Radio, STM-1/OC-3), or signal coming from the PW card."
|
|
::= { genEquipSynchronizationSrcEntry 3 }
|
|
|
|
genEquipSynchronizationSrcNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The sync source number: VC in STM-1/OC-3, Radio channel in case the interface is Radio, or E1 number in
|
|
case the interface is PDH (E1s)."
|
|
::= { genEquipSynchronizationSrcEntry 4 }
|
|
|
|
genEquipSynchronizationSrcValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-valid(0),
|
|
valid(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This paremter is the source status, if the source if valid or not.
|
|
In case it is valid, it means that the clock being extracted from the source is ok and can be used.
|
|
In case it is not-valid the source is not in use, each interface will have it's own clock."
|
|
::= { genEquipSynchronizationSrcEntry 5 }
|
|
|
|
genEquipSynchronizationSrcTrail OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter indicates whether the synchronization source is the
|
|
signal of an existing co-located TDM trail used for traffic.
|
|
Enabling this parameter in an interface which does not belong to a trail will fail,
|
|
as well as disabling it for an interface which belongs to a trail."
|
|
::= { genEquipSynchronizationSrcEntry 6 }
|
|
|
|
genEquipSynchronizationSrcAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Admin state of the sync source (the sync source is enabled or disabled)."
|
|
::= { genEquipSynchronizationSrcEntry 7 }
|
|
|
|
genEquipSynchronizationSrcQuality OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(0),
|
|
prs(1),
|
|
g811(2),
|
|
transit-node(3),
|
|
ssu-a(4),
|
|
unknown(5),
|
|
stratum2(7),
|
|
ssu-b(8),
|
|
stratum3(10),
|
|
g813-8262(11),
|
|
smc(12),
|
|
stratum3e(13),
|
|
do-not-use (15)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"parameter configures the quality of the incoming clock signal."
|
|
::= { genEquipSynchronizationSrcEntry 8 }
|
|
|
|
genEquipSynchronizationSrcReceivedSSM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter shows the current value of the received SSM messages."
|
|
::= { genEquipSynchronizationSrcEntry 9 }
|
|
|
|
genEquipSynchronizationSrcQualityStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(0),
|
|
prs(1),
|
|
g811(2),
|
|
transit-node(3),
|
|
ssu-a(4),
|
|
unknown(5),
|
|
stratum2(7),
|
|
ssu-b(8),
|
|
stratum3(10),
|
|
g813-8262(11),
|
|
smc(12),
|
|
stratum3e(13),
|
|
do-not-use(15),
|
|
failure(16)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter shows the current quality level of the interface."
|
|
::= { genEquipSynchronizationSrcEntry 10 }
|
|
|
|
-- PW services configuration
|
|
genEquipServicesPW OBJECT IDENTIFIER ::= {genEquipServices 4}
|
|
|
|
genEquipServicesPWBundlesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWBundlesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of DS0 bundles.
|
|
Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable."
|
|
::= { genEquipServicesPW 1 }
|
|
|
|
genEquipServicesPWBundlesEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWBundlesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of DS0 bundles.
|
|
Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable."
|
|
INDEX { genEquipServicesPWBundlesDs0List, genEquipServicesPWBundlesBundleId }
|
|
::= { genEquipServicesPWBundlesTable 1 }
|
|
|
|
GenEquipServicesPWBundlesEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWBundlesBundleId
|
|
INTEGER,
|
|
genEquipServicesPWBundlesDs0List
|
|
INTEGER,
|
|
genEquipServicesPWBundlesRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesPWBundlesBundleId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..496)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unique DS0 bundle ID."
|
|
::= { genEquipServicesPWBundlesEntry 1 }
|
|
|
|
genEquipServicesPWBundlesDs0List OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"DS0 slot number belonging to a bundle."
|
|
|
|
::= { genEquipServicesPWBundlesEntry 2 }
|
|
|
|
genEquipServicesPWBundlesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesPWBundlesEntry 30 }
|
|
|
|
-- genEquipServicesPWBundlesDescriptionTable
|
|
genEquipServicesPWBundlesDescriptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWBundlesDescriptionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of DS0 bundles description.
|
|
Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable."
|
|
::= { genEquipServicesPW 2 }
|
|
|
|
genEquipServicesPWBundlesDescriptionEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWBundlesDescriptionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of DS0 bundles description.
|
|
Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable."
|
|
INDEX { genEquipServicesPWBundlesDescriptionBundleId }
|
|
::= { genEquipServicesPWBundlesDescriptionTable 1 }
|
|
|
|
GenEquipServicesPWBundlesDescriptionEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWBundlesDescriptionBundleId
|
|
INTEGER,
|
|
genEquipServicesPWBundlesDescriptionBundleDesc
|
|
DisplayString,
|
|
genEquipServicesPWBundlesDescriptionBundleAdmin
|
|
EnableDisable,
|
|
genEquipServicesPWBundlesDescriptionBundleOperStatus
|
|
INTEGER,
|
|
genEquipServicesPWBundlesDescriptionBundleTdmPort
|
|
INTEGER,
|
|
genEquipServicesPWBundlesDescriptionRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesPWBundlesDescriptionBundleId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..496)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unique DS0 bundle ID."
|
|
::= { genEquipServicesPWBundlesDescriptionEntry 1 }
|
|
|
|
genEquipServicesPWBundlesDescriptionBundleDesc OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"DS0 bundle description."
|
|
::= { genEquipServicesPWBundlesDescriptionEntry 2 }
|
|
|
|
genEquipServicesPWBundlesDescriptionBundleAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Admin."
|
|
::= { genEquipServicesPWBundlesDescriptionEntry 3 }
|
|
|
|
genEquipServicesPWBundlesDescriptionBundleOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Operational status."
|
|
::= { genEquipServicesPWBundlesDescriptionEntry 4 }
|
|
|
|
genEquipServicesPWBundlesDescriptionBundleTdmPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM port from which the channels are assigned to the bundle."
|
|
::= { genEquipServicesPWBundlesDescriptionEntry 5 }
|
|
|
|
genEquipServicesPWBundlesDescriptionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesPWBundlesDescriptionEntry 30 }
|
|
|
|
-- PW PSN tunnels Table
|
|
genEquipServicesPWPSNTunnelsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of PSN encapsulations meant for pseudowire services."
|
|
::= { genEquipServicesPW 3 }
|
|
|
|
genEquipServicesPWPSNTunnelsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWPSNTunnelsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of PSN encapsulations meant for pseudowire services."
|
|
INDEX { genEquipServicesPWPSNTunnelsSlotNumber, genEquipServicesPWPSNTunnelsTunnelId }
|
|
::= { genEquipServicesPWPSNTunnelsTable 1 }
|
|
|
|
GenEquipServicesPWPSNTunnelsEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWPSNTunnelsSlotNumber
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsTunnelId
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsPsnType
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsSVid
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsCVid
|
|
EnableDisable,
|
|
genEquipServicesPWPSNTunnelsPBits
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsDestIpAddr
|
|
IpAddress,
|
|
genEquipServicesPWPSNTunnelsDestIpSubnet
|
|
IpAddress,
|
|
genEquipServicesPWPSNTunnelsNextHopIp
|
|
IpAddress,
|
|
genEquipServicesPWPSNTunnelsTosDscp
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsRemoteMacAddr
|
|
OCTET STRING,
|
|
genEquipServicesPWPSNTunnelsSourceIpAddr
|
|
IpAddress,
|
|
genEquipServicesPWPSNTunnelsSourceMacAddr
|
|
OCTET STRING,
|
|
-- New part
|
|
genEquipServicesPWPSNTunnelsStatus
|
|
DownUp,
|
|
genEquipServicesPWPSNTunnelsSourceMPLSLabel
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsDestinationMPLSLabel
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsMPLSexp
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsVlanType
|
|
PWTunnelVlanType,
|
|
genEquipServicesPWPSNTunnelsVid
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelsMAid
|
|
INTEGER,
|
|
|
|
genEquipServicesPWPSNTunnelsRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesPWPSNTunnelsSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot number where the relevant PW card is inserted."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 1 }
|
|
|
|
genEquipServicesPWPSNTunnelsTunnelId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel ID."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 2 }
|
|
|
|
genEquipServicesPWPSNTunnelsPsnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
udpip(0),
|
|
ethernet(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Psn type supported by this tunnel."
|
|
|
|
::= { genEquipServicesPWPSNTunnelsEntry 3 }
|
|
|
|
genEquipServicesPWPSNTunnelsSVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4091)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel S-VLAN Id."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 4 }
|
|
|
|
genEquipServicesPWPSNTunnelsCVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4091)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel C-VLAN Id."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 5 }
|
|
|
|
genEquipServicesPWPSNTunnelsPBits OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel P-bits."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 6 }
|
|
|
|
genEquipServicesPWPSNTunnelsDestIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Destination IP Address for UDP/IP PSN tunnel."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 7 }
|
|
|
|
genEquipServicesPWPSNTunnelsDestIpSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Destination IP Subnet for UDP/IP PSN tunnel."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 8 }
|
|
|
|
genEquipServicesPWPSNTunnelsNextHopIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Next hop IP Address for UDP/IP PSN tunnel."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 9 }
|
|
|
|
genEquipServicesPWPSNTunnelsTosDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel ToS (DSCP)."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 10 }
|
|
|
|
genEquipServicesPWPSNTunnelsRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote MAC Adress."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 11 }
|
|
|
|
genEquipServicesPWPSNTunnelsSourceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Source IP Address."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 12 }
|
|
|
|
genEquipServicesPWPSNTunnelsSourceMacAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Source MAC Address."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 13 }
|
|
|
|
genEquipServicesPWPSNTunnelsStatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel admin."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 14 }
|
|
|
|
genEquipServicesPWPSNTunnelsSourceMPLSLabel OBJECT-TYPE
|
|
SYNTAX INTEGER (16..1048575)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Source MPLS Label."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 15 }
|
|
|
|
genEquipServicesPWPSNTunnelsDestinationMPLSLabel OBJECT-TYPE
|
|
SYNTAX INTEGER (16..1048575)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Destination MPLS label."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 16 }
|
|
|
|
genEquipServicesPWPSNTunnelsMPLSexp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MPLS Experimental field."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 17 }
|
|
|
|
genEquipServicesPWPSNTunnelsVlanType OBJECT-TYPE
|
|
SYNTAX PWTunnelVlanType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN)."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 18 }
|
|
|
|
genEquipServicesPWPSNTunnelsVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel VLAN ID."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 19 }
|
|
|
|
genEquipServicesPWPSNTunnelsMAid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association Id."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 20 }
|
|
|
|
|
|
genEquipServicesPWPSNTunnelsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesPWPSNTunnelsEntry 30 }
|
|
|
|
-- PW Profiles Configuration Table
|
|
genEquipServicesPWProfilesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWProfilesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of pseudowire profiles.
|
|
These profiles are used when configuring PW services in table genEquipServicesPWServiceTable."
|
|
::= { genEquipServicesPW 4 }
|
|
|
|
genEquipServicesPWProfilesEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWProfilesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of pseudowire profiles.
|
|
These profiles are used when configuring PW services in table genEquipServicesPWServiceTable."
|
|
INDEX { genEquipServicesPWProfilesPWProfileId }
|
|
::= { genEquipServicesPWProfilesTable 1 }
|
|
|
|
GenEquipServicesPWProfilesEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWProfilesPWProfileId
|
|
INTEGER,
|
|
genEquipServicesPWProfilesPayloadSize
|
|
INTEGER,
|
|
genEquipServicesPWProfilesJitterBufferDepth
|
|
INTEGER,
|
|
genEquipServicesPWProfilesLopsDetection
|
|
EnableDisable,
|
|
genEquipServicesPWProfilesRtpHeaderUsed
|
|
NoYes,
|
|
genEquipServicesPWProfilesRtpTimestampMode
|
|
PWRtpTimeStampMode,
|
|
genEquipServicesPWProfilesRtpTimestampAbsFactor
|
|
INTEGER,
|
|
genEquipServicesPWProfilesPayloadSuppression
|
|
EnableDisable,
|
|
genEquipServicesPWProfilesPayloadType
|
|
INTEGER,
|
|
genEquipServicesPWProfilesConseqPacketsInSync
|
|
INTEGER,
|
|
genEquipServicesPWProfilesConseqMissPktsOutSync
|
|
INTEGER,
|
|
genEquipServicesPWProfilesPktLossTimeWindow
|
|
INTEGER,
|
|
genEquipServicesPWProfilesExcessivePktLossThresh
|
|
INTEGER,
|
|
genEquipServicesPWProfilesAlarmThresh
|
|
INTEGER,
|
|
genEquipServicesPWProfilesClearAlarmThresh
|
|
INTEGER,
|
|
genEquipServicesPWProfilesMissingPktsToSes
|
|
INTEGER,
|
|
genEquipServicesPWProfilesDs0Filler
|
|
INTEGER,
|
|
genEquipServicesPWProfilesCasAlarmPattern
|
|
INTEGER,
|
|
genEquipServicesPWProfilesRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesPWProfilesPWProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unique PW profile ID."
|
|
::= { genEquipServicesPWProfilesEntry 1 }
|
|
|
|
genEquipServicesPWProfilesPayloadSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1500)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Payload size in bytes."
|
|
::= { genEquipServicesPWProfilesEntry 2 }
|
|
|
|
genEquipServicesPWProfilesJitterBufferDepth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation"
|
|
::= { genEquipServicesPWProfilesEntry 3 }
|
|
|
|
genEquipServicesPWProfilesLopsDetection OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If enabled, LOPS detection is supported."
|
|
::= { genEquipServicesPWProfilesEntry 4 }
|
|
|
|
genEquipServicesPWProfilesRtpHeaderUsed OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If set to False: an RTP header is not pre-pended to the TDM packet."
|
|
::= { genEquipServicesPWProfilesEntry 5 }
|
|
|
|
genEquipServicesPWProfilesRtpTimestampMode OBJECT-TYPE
|
|
SYNTAX PWRtpTimeStampMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RTP timestamp mode"
|
|
::= { genEquipServicesPWProfilesEntry 6 }
|
|
|
|
genEquipServicesPWProfilesRtpTimestampAbsFactor OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Multiplication factor for 8KHz units in absolute mode of RTP timestamping."
|
|
::= { genEquipServicesPWProfilesEntry 7 }
|
|
|
|
genEquipServicesPWProfilesPayloadSuppression OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Payload suppression."
|
|
::= { genEquipServicesPWProfilesEntry 8 }
|
|
|
|
genEquipServicesPWProfilesPayloadType OBJECT-TYPE
|
|
SYNTAX INTEGER (1..123)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Payload type."
|
|
::= { genEquipServicesPWProfilesEntry 9 }
|
|
|
|
genEquipServicesPWProfilesConseqPacketsInSync OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of consecutive packets with sequential sequence numbers required to exit LOPS."
|
|
::= { genEquipServicesPWProfilesEntry 10 }
|
|
|
|
genEquipServicesPWProfilesConseqMissPktsOutSync OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of consecutive missing packets required to enter LOPS."
|
|
::= { genEquipServicesPWProfilesEntry 11 }
|
|
|
|
genEquipServicesPWProfilesPktLossTimeWindow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time for computing average packet loss rate to detect excessive packet loss."
|
|
::= { genEquipServicesPWProfilesEntry 12 }
|
|
|
|
genEquipServicesPWProfilesExcessivePktLossThresh OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm threshold (in percent) for excessive packet loss."
|
|
::= { genEquipServicesPWProfilesEntry 13 }
|
|
|
|
genEquipServicesPWProfilesAlarmThresh OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delay (in msecs) for persistent alarm setting."
|
|
::= { genEquipServicesPWProfilesEntry 14 }
|
|
|
|
genEquipServicesPWProfilesClearAlarmThresh OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delay (in msecs) for persistent alarm clearing."
|
|
::= { genEquipServicesPWProfilesEntry 15 }
|
|
|
|
genEquipServicesPWProfilesMissingPktsToSes OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Percent of missing packets detected in 1 second window to cause SES to be counted."
|
|
::= { genEquipServicesPWProfilesEntry 16 }
|
|
|
|
genEquipServicesPWProfilesDs0Filler OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer."
|
|
::= { genEquipServicesPWProfilesEntry 17 }
|
|
|
|
genEquipServicesPWProfilesCasAlarmPattern OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer."
|
|
::= { genEquipServicesPWProfilesEntry 18 }
|
|
|
|
genEquipServicesPWProfilesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesPWProfilesEntry 30 }
|
|
|
|
|
|
-- PW Service Configuration Table
|
|
genEquipServicesPWServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels,
|
|
and profiles to a service."
|
|
::= { genEquipServicesPW 5 }
|
|
|
|
genEquipServicesPWServiceEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels,
|
|
and profiles to a service."
|
|
INDEX { genEquipServicesPWServicePWId }
|
|
::= { genEquipServicesPWServiceTable 1 }
|
|
|
|
GenEquipServicesPWServiceEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWServicePWId
|
|
INTEGER,
|
|
genEquipServicesPWServicePWType
|
|
INTEGER,
|
|
genEquipServicesPWServicePsnType
|
|
INTEGER,
|
|
genEquipServicesPWServiceTdmPort
|
|
INTEGER,
|
|
genEquipServicesPWServiceDs0bundle
|
|
INTEGER,
|
|
genEquipServicesPWServiceTdmProfileId
|
|
INTEGER,
|
|
genEquipServicesPWServicePsnTunnelProtection
|
|
EnableDisable,
|
|
genEquipServicesPWServicePsnTunnelOrGroupId
|
|
INTEGER,
|
|
genEquipServicesPWServiceSrcUdpPortOrEcid
|
|
INTEGER,
|
|
genEquipServicesPWServiceDstUdpPortOrEcid
|
|
INTEGER,
|
|
genEquipServicesPWServiceAdmin
|
|
EnableDisable,
|
|
genEquipServicesPWServiceCrReference
|
|
EnableDisable,
|
|
genEquipServicesPWServiceOperStatus
|
|
EnableDisable,
|
|
genEquipServicesPWServiceRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesPWServicePWId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pseudo Wire ID."
|
|
::= { genEquipServicesPWServiceEntry 1 }
|
|
|
|
genEquipServicesPWServicePWType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
e1-satop(0),
|
|
cespsn(1),
|
|
cas-cespsn(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PW type. E1-satop denotes SAToP. Cespsn Denotes CESoP without CAS signalling,
|
|
and cas-cespsn denotes CESoP with CAS signalling."
|
|
::= { genEquipServicesPWServiceEntry 2 }
|
|
|
|
genEquipServicesPWServicePsnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
udpip(0),
|
|
eth(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation."
|
|
::= { genEquipServicesPWServiceEntry 3 }
|
|
|
|
genEquipServicesPWServiceTdmPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of TDM port (for SATOP). This parameter must be zero for CESoP."
|
|
::= { genEquipServicesPWServiceEntry 4 }
|
|
|
|
genEquipServicesPWServiceDs0bundle OBJECT-TYPE
|
|
SYNTAX INTEGER (1..496)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP."
|
|
::= { genEquipServicesPWServiceEntry 5 }
|
|
|
|
genEquipServicesPWServiceTdmProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM configuration profile ID."
|
|
::= { genEquipServicesPWServiceEntry 6 }
|
|
|
|
genEquipServicesPWServicePsnTunnelProtection OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel protection mode."
|
|
::= { genEquipServicesPWServiceEntry 7 }
|
|
|
|
genEquipServicesPWServicePsnTunnelOrGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel."
|
|
::= { genEquipServicesPWServiceEntry 8 }
|
|
|
|
genEquipServicesPWServiceSrcUdpPortOrEcid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Source UDP Port for UDP IP tunnel or ECID for Ethernet tunnel."
|
|
::= { genEquipServicesPWServiceEntry 9 }
|
|
|
|
genEquipServicesPWServiceDstUdpPortOrEcid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Destination UDP Port for UDP IP tunnel or ECID for Ethernet tunnel."
|
|
::= { genEquipServicesPWServiceEntry 10 }
|
|
|
|
genEquipServicesPWServiceAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Admin status."
|
|
::= { genEquipServicesPWServiceEntry 11 }
|
|
|
|
genEquipServicesPWServiceCrReference OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock recovery reference."
|
|
::= { genEquipServicesPWServiceEntry 12 }
|
|
|
|
genEquipServicesPWServiceOperStatus OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Operational status."
|
|
::= { genEquipServicesPWServiceEntry 13 }
|
|
|
|
genEquipServicesPWServiceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesPWServiceEntry 30 }
|
|
|
|
|
|
--
|
|
-- NG PW Services
|
|
--
|
|
genEquipServicesNGPW OBJECT IDENTIFIER ::= {genEquipServicesPW 6}
|
|
|
|
--
|
|
-- Bundle channel list configuration table - pw-bundle-channel-list-configuration-table
|
|
--
|
|
genEquipServicesNGPWBundlesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows definition of the group of timeslots comprising a bundle."
|
|
::= { genEquipServicesNGPW 1 }
|
|
|
|
genEquipServicesNGPWBundlesEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWBundlesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows definition of the group of timeslots comprising a bundle."
|
|
INDEX { genEquipServicesNGPWBundlesSlotId, genEquipServicesNGPWBundlesTdmPort, genEquipServicesNGPWBundlesDs0List }
|
|
::= { genEquipServicesNGPWBundlesTable 1 }
|
|
|
|
GenEquipServicesNGPWBundlesEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWBundlesSlotId
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesTdmPort
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesDs0List
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesIfIndex
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesBundleId
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesNGPWBundlesSlotId OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWBundlesEntry 1 }
|
|
|
|
genEquipServicesNGPWBundlesTdmPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM Port number."
|
|
::= { genEquipServicesNGPWBundlesEntry 2 }
|
|
|
|
genEquipServicesNGPWBundlesDs0List OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Timeslot number to be included in a bundle."
|
|
::= { genEquipServicesNGPWBundlesEntry 3 }
|
|
|
|
genEquipServicesNGPWBundlesIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"iIndex."
|
|
::= { genEquipServicesNGPWBundlesEntry 4 }
|
|
|
|
genEquipServicesNGPWBundlesBundleId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bundle ID."
|
|
::= { genEquipServicesNGPWBundlesEntry 5 }
|
|
|
|
genEquipServicesNGPWBundlesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status to allow user add entries dynamically."
|
|
::= { genEquipServicesNGPWBundlesEntry 30 }
|
|
|
|
--
|
|
-- Bundle configuration table - pw-bundle-configuration-table
|
|
--
|
|
genEquipServicesNGPWBundlesDescriptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesDescriptionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuring admin state and description for bundles."
|
|
::= { genEquipServicesNGPW 2 }
|
|
|
|
genEquipServicesNGPWBundlesDescriptionEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWBundlesDescriptionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuring admin state and description for bundles."
|
|
INDEX { genEquipServicesNGPWBundlesDescriptionSlotId, genEquipServicesNGPWBundlesDescriptionBundleId }
|
|
::= { genEquipServicesNGPWBundlesDescriptionTable 1 }
|
|
|
|
GenEquipServicesNGPWBundlesDescriptionEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWBundlesDescriptionSlotId
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesDescriptionBundleId
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesDescriptionAdmin
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWBundlesDescriptionBundleDesc
|
|
DisplayString,
|
|
genEquipServicesNGPWBundlesDescriptionRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesNGPWBundlesDescriptionSlotId OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWBundlesDescriptionEntry 1 }
|
|
|
|
genEquipServicesNGPWBundlesDescriptionBundleId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bundle ID."
|
|
::= { genEquipServicesNGPWBundlesDescriptionEntry 2 }
|
|
|
|
genEquipServicesNGPWBundlesDescriptionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bundle administrative state."
|
|
::= { genEquipServicesNGPWBundlesDescriptionEntry 3 }
|
|
|
|
genEquipServicesNGPWBundlesDescriptionBundleDesc OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bundle description."
|
|
::= { genEquipServicesNGPWBundlesDescriptionEntry 4 }
|
|
|
|
genEquipServicesNGPWBundlesDescriptionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status to allow user add entries dynamically."
|
|
::= { genEquipServicesNGPWBundlesDescriptionEntry 30 }
|
|
|
|
--
|
|
-- PW profile configuraiton table - pw-profile-configuration-table
|
|
--
|
|
genEquipServicesNGPWProfilesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWProfilesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of PW service profiles."
|
|
::= { genEquipServicesNGPW 3 }
|
|
|
|
genEquipServicesNGPWProfilesEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWProfilesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of PW service profiles."
|
|
INDEX { genEquipServicesNGPWProfilesPWProfileId }
|
|
::= { genEquipServicesNGPWProfilesTable 1 }
|
|
|
|
GenEquipServicesNGPWProfilesEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWProfilesPWProfileId
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesPayloadSize
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesJitterBufferDepth
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesPayloadSuppression
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWProfilesPayloadType
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesDs0Filler
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesCasAlarmPattern
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesRtpHeaderUsed
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWProfilesRtpTimestampMode
|
|
PWRtpTimeStampMode,
|
|
genEquipServicesNGPWProfilesRtpTimestampAbsFactor
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesLopsDetection
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWProfilesConseqPacketsInSync
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesConseqMissPktsOutSync
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesPktLossTimeWindow
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesExcessivePktLossThresh
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesAlarmThresh
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesClearAlarmThresh
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesMissingPktsToSes
|
|
INTEGER,
|
|
genEquipServicesNGPWProfilesRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesNGPWProfilesPWProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unique PW profile ID."
|
|
::= { genEquipServicesNGPWProfilesEntry 1 }
|
|
|
|
genEquipServicesNGPWProfilesPayloadSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Payload size, in terms of TDM frames in each packet."
|
|
::= { genEquipServicesNGPWProfilesEntry 2 }
|
|
|
|
genEquipServicesNGPWProfilesJitterBufferDepth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation."
|
|
::= { genEquipServicesNGPWProfilesEntry 3 }
|
|
|
|
genEquipServicesNGPWProfilesPayloadSuppression OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When enabled, payload is suppresed upon incoming TDM failure."
|
|
::= { genEquipServicesNGPWProfilesEntry 4 }
|
|
|
|
genEquipServicesNGPWProfilesPayloadType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Payload type byte."
|
|
::= { genEquipServicesNGPWProfilesEntry 5 }
|
|
|
|
genEquipServicesNGPWProfilesDs0Filler OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer."
|
|
::= { genEquipServicesNGPWProfilesEntry 6 }
|
|
|
|
genEquipServicesNGPWProfilesCasAlarmPattern OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer."
|
|
::= { genEquipServicesNGPWProfilesEntry 7 }
|
|
|
|
genEquipServicesNGPWProfilesRtpHeaderUsed OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If set to False: an RTP header is not pre-pended to the TDM packet."
|
|
::= { genEquipServicesNGPWProfilesEntry 8 }
|
|
|
|
genEquipServicesNGPWProfilesRtpTimestampMode OBJECT-TYPE
|
|
SYNTAX PWRtpTimeStampMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RTP timestamp mode."
|
|
::= { genEquipServicesNGPWProfilesEntry 9 }
|
|
|
|
genEquipServicesNGPWProfilesRtpTimestampAbsFactor OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Multiplication factor for 8KHz units in absolute mode of RTP timestamping."
|
|
::= { genEquipServicesNGPWProfilesEntry 10 }
|
|
|
|
genEquipServicesNGPWProfilesLopsDetection OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Timeout for TDM ports loopback."
|
|
::= { genEquipServicesNGPWProfilesEntry 11 }
|
|
|
|
genEquipServicesNGPWProfilesConseqPacketsInSync OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of consecutive packets with sequential sequence numbers required to exit LOPS."
|
|
::= { genEquipServicesNGPWProfilesEntry 12 }
|
|
|
|
genEquipServicesNGPWProfilesConseqMissPktsOutSync OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of consecutive missing packets required to enter LOPS."
|
|
::= { genEquipServicesNGPWProfilesEntry 13 }
|
|
|
|
genEquipServicesNGPWProfilesPktLossTimeWindow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time for computing average packet loss rate to detect excessive packet loss."
|
|
::= { genEquipServicesNGPWProfilesEntry 14 }
|
|
|
|
genEquipServicesNGPWProfilesExcessivePktLossThresh OBJECT-TYPE
|
|
SYNTAX INTEGER (1..500)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Alarm threshold (in percent) for excessive packet loss."
|
|
::= { genEquipServicesNGPWProfilesEntry 15 }
|
|
|
|
genEquipServicesNGPWProfilesAlarmThresh OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delay (in msecs) for persistent alarm setting."
|
|
::= { genEquipServicesNGPWProfilesEntry 16 }
|
|
|
|
genEquipServicesNGPWProfilesClearAlarmThresh OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delay (in msecs) for persistent alarm clearing."
|
|
::= { genEquipServicesNGPWProfilesEntry 17 }
|
|
|
|
genEquipServicesNGPWProfilesMissingPktsToSes OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TPercent of missing packets detected in 1 second window to cause SES to be counted."
|
|
::= { genEquipServicesNGPWProfilesEntry 18 }
|
|
|
|
genEquipServicesNGPWProfilesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status to allow user add entries dynamically."
|
|
::= { genEquipServicesNGPWProfilesEntry 30 }
|
|
|
|
--
|
|
-- PSN tunnel configuration table - pw-psn-tunnel-configuration-table
|
|
--
|
|
genEquipServicesNGPWPSNTunnelsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of PSN tunnel encapsulations for PW services."
|
|
::= { genEquipServicesNGPW 4 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWPSNTunnelsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of PSN tunnel encapsulations for PW services."
|
|
INDEX { genEquipServicesNGPWPSNTunnelsSlotID, genEquipServicesNGPWPSNTunnelsTunnelId }
|
|
::= { genEquipServicesNGPWPSNTunnelsTable 1 }
|
|
|
|
GenEquipServicesNGPWPSNTunnelsEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWPSNTunnelsSlotID
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsTunnelId
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsAdmin
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWPSNTunnelsPsnType
|
|
PWTunnelPsnType,
|
|
genEquipServicesNGPWPSNTunnelsDestIpAddr
|
|
IpAddress,
|
|
genEquipServicesNGPWPSNTunnelsNextHopIp
|
|
IpAddress,
|
|
genEquipServicesNGPWPSNTunnelsTosDscp
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsRemoteMacAddr
|
|
OCTET STRING,
|
|
genEquipServicesNGPWPSNTunnelsSourceMPLSLabel
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsDestinationMPLSLabel
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsMPLSexp
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsVlanType
|
|
PWTunnelVlanType,
|
|
genEquipServicesNGPWPSNTunnelsVid
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsPBits
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsMaId
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsTDMDefectPropagation
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWPSNTunnelsRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesNGPWPSNTunnelsSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 1 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsTunnelId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel ID."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 2 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Payload type byte."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 3 }
|
|
|
|
|
|
genEquipServicesNGPWPSNTunnelsPsnType OBJECT-TYPE
|
|
SYNTAX PWTunnelPsnType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 4 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsDestIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Destination IP."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 5 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsNextHopIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Next hop IP Address for UDP/IP PSN tunnel."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 6 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsTosDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel ToS (DSCP)."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 7 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote MAC address."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 8 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsSourceMPLSLabel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Source MPLS Label."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 9 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsDestinationMPLSLabel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Destination MPLS label."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 10 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsMPLSexp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MPLS Experimental field."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 11 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsVlanType OBJECT-TYPE
|
|
SYNTAX PWTunnelVlanType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN)."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 12 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4090)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel VLAN ID."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 13 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsPBits OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel P-bits."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 14 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsMaId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association ID."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 15 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsTDMDefectPropagation OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM defect propagation to SOAM. Enable for dual homing configuration."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 16 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status to allow user add entries dynamically."
|
|
::= { genEquipServicesNGPWPSNTunnelsEntry 30 }
|
|
|
|
--
|
|
-- PW service configuration table - pw-service-configuration-table
|
|
--
|
|
genEquipServicesNGPWServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows definition of PW services."
|
|
::= { genEquipServicesNGPW 5 }
|
|
|
|
genEquipServicesNGPWServiceEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows definition of PW services."
|
|
INDEX { genEquipServicesNGPWServiceSlotID, genEquipServicesNGPWServicePWId }
|
|
::= { genEquipServicesNGPWServiceTable 1 }
|
|
|
|
GenEquipServicesNGPWServiceEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWServiceSlotID
|
|
INTEGER,
|
|
genEquipServicesNGPWServicePWId
|
|
INTEGER,
|
|
genEquipServicesNGPWServiceAdmin
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWServicePWType
|
|
INTEGER,
|
|
genEquipServicesNGPWServicePsnType
|
|
PWTunnelPsnType,
|
|
genEquipServicesNGPWServiceDs0bundle
|
|
INTEGER,
|
|
genEquipServicesNGPWServiceTdmProfileId
|
|
INTEGER,
|
|
genEquipServicesNGPWServiceTunnel
|
|
INTEGER,
|
|
genEquipServicesNGPWServiceCrReference
|
|
NoYes,
|
|
genEquipServicesNGPWServiceSrcPsnId
|
|
INTEGER,
|
|
genEquipServicesNGPWServiceDstPsnId
|
|
INTEGER,
|
|
genEquipServicesNGPWServicePsnTunnelProtection
|
|
INTEGER,
|
|
genEquipServicesNGPWServiceRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesNGPWServiceSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWServiceEntry 1 }
|
|
|
|
genEquipServicesNGPWServicePWId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pseudowire ID."
|
|
::= { genEquipServicesNGPWServiceEntry 2 }
|
|
|
|
genEquipServicesNGPWServiceAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Administrative status of this PW service."
|
|
::= { genEquipServicesNGPWServiceEntry 3 }
|
|
|
|
|
|
genEquipServicesNGPWServicePWType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
satop(0),
|
|
cespsn(1),
|
|
cas-cespsn(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the emulated service to be carried over the PW service (SAToP, CESoP, CESoP with PSN)."
|
|
::= { genEquipServicesNGPWServiceEntry 4 }
|
|
|
|
genEquipServicesNGPWServicePsnType OBJECT-TYPE
|
|
SYNTAX PWTunnelPsnType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the PSN type that the PW service will use over the network."
|
|
::= { genEquipServicesNGPWServiceEntry 5 }
|
|
|
|
genEquipServicesNGPWServiceDs0bundle OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP."
|
|
::= { genEquipServicesNGPWServiceEntry 6 }
|
|
|
|
genEquipServicesNGPWServiceTdmProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the PW profile id for this PW service."
|
|
::= { genEquipServicesNGPWServiceEntry 7 }
|
|
|
|
genEquipServicesNGPWServiceTunnel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel."
|
|
::= { genEquipServicesNGPWServiceEntry 8 }
|
|
|
|
genEquipServicesNGPWServiceCrReference OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Whether this PW may be used as a reference for clock recovery."
|
|
::= { genEquipServicesNGPWServiceEntry 9 }
|
|
|
|
genEquipServicesNGPWServiceSrcPsnId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Source UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel."
|
|
::= { genEquipServicesNGPWServiceEntry 10 }
|
|
|
|
genEquipServicesNGPWServiceDstPsnId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Destination UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel."
|
|
::= { genEquipServicesNGPWServiceEntry 11 }
|
|
|
|
genEquipServicesNGPWServicePsnTunnelProtection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether this PW service is PSN protected."
|
|
::= { genEquipServicesNGPWServiceEntry 12 }
|
|
|
|
genEquipServicesNGPWServiceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status to allow user add entries dynamically."
|
|
::= { genEquipServicesNGPWServiceEntry 30 }
|
|
|
|
--
|
|
-- TDM port configuration table - pw-tdm-port-configuration-table
|
|
--
|
|
genEquipServicesNGPWTDMPortsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWTDMPortsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of TDM ports."
|
|
::= { genEquipServicesNGPW 6 }
|
|
|
|
genEquipServicesNGPWTDMPortsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWTDMPortsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of TDM ports."
|
|
INDEX { genEquipServicesNGPWTDMPortsSlotID, genEquipServicesNGPWTDMPortsPort }
|
|
::= { genEquipServicesNGPWTDMPortsTable 1 }
|
|
|
|
GenEquipServicesNGPWTDMPortsEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWTDMPortsSlotID
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsPort
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsIfIndex
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsAdmin
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWTDMPortsLineType
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsLineCoding
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsChannelization
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWTDMPortsTimingMode
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsClockSourceRef
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsClkSrcRefPort
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsIdleCode
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsCableLength
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsLoopback
|
|
TDMLoopbackType
|
|
}
|
|
|
|
genEquipServicesNGPWTDMPortsSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 1 }
|
|
|
|
genEquipServicesNGPWTDMPortsPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Physical port number in the card."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 2 }
|
|
|
|
genEquipServicesNGPWTDMPortsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ifIndex."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 3 }
|
|
|
|
genEquipServicesNGPWTDMPortsAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM port administrative state."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 4 }
|
|
|
|
genEquipServicesNGPWTDMPortsLineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
e1Unframed(0),
|
|
e1(1),
|
|
e1-crc(2),
|
|
e1-mf(3),
|
|
e1-mf-crc(4),
|
|
ds1-d4(5),
|
|
ds1-esf(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Line type of this TDM port."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 5 }
|
|
|
|
genEquipServicesNGPWTDMPortsLineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hdb3-b8zs(0),
|
|
ami(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1. AMI is only for T1."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 6 }
|
|
|
|
genEquipServicesNGPWTDMPortsChannelization OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indication whether this TDM port is channelized into DS0s."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 7 }
|
|
|
|
genEquipServicesNGPWTDMPortsTimingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
loop(0),
|
|
absolute(1),
|
|
clock-recovery(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock reference for the outgoing TDM signal."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 8 }
|
|
|
|
genEquipServicesNGPWTDMPortsClockSourceRef OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
front-panel(1),
|
|
sys-ref(2)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock source reference for Absolute clock mode. ???none??? - for loop or clock-recovery timing modes."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 9 }
|
|
|
|
genEquipServicesNGPWTDMPortsClkSrcRefPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM port serving as a clock reference for loop or clock-recovery timing modes."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 10 }
|
|
|
|
genEquipServicesNGPWTDMPortsIdleCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value to be transmitted on this TDM port in unused timeslots."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 11 }
|
|
|
|
genEquipServicesNGPWTDMPortsCableLength OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fixed-or-0-133ft(0),
|
|
len-133-266ft(1),
|
|
len-266-399ft(2),
|
|
len-399-533ft(3),
|
|
len-533-655ft(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Cable length for this port. The value fixed-or-0-133ft means fixed for E1 (the only valid value) and 0-133ft for T1."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 12 }
|
|
|
|
genEquipServicesNGPWTDMPortsLoopback OBJECT-TYPE
|
|
SYNTAX TDMLoopbackType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of required loopback on this TDM port."
|
|
::= { genEquipServicesNGPWTDMPortsEntry 13 }
|
|
|
|
--
|
|
-- PSN tunnel status table - pw-psn-tunnel-status-table
|
|
--
|
|
genEquipServicesNGPWPSNTunnelsStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelsStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains status and information about existing PSN tunnels."
|
|
::= { genEquipServicesNGPW 7 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWPSNTunnelsStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry contains status and information about existing PSN tunnels."
|
|
INDEX { genEquipServicesNGPWPSNTunnelsStatusSlotID, genEquipServicesNGPWPSNTunnelsStatusTunnelId }
|
|
::= { genEquipServicesNGPWPSNTunnelsStatusTable 1 }
|
|
|
|
GenEquipServicesNGPWPSNTunnelsStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWPSNTunnelsStatusSlotID
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsStatusTunnelId
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelsStatusOperStatus
|
|
DownUp,
|
|
genEquipServicesNGPWPSNTunnelsStatusSourceIpAddr
|
|
IpAddress,
|
|
genEquipServicesNGPWPSNTunnelsStatusSourceMacAddr
|
|
OCTET STRING,
|
|
genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr
|
|
OCTET STRING
|
|
}
|
|
|
|
genEquipServicesNGPWPSNTunnelsStatusSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 1 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsStatusTunnelId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel ID."
|
|
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 2 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsStatusOperStatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel operational state."
|
|
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 3 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsStatusSourceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel source IP address."
|
|
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 4 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsStatusSourceMacAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel source MAC address."
|
|
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 5 }
|
|
|
|
genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN tunnel remote MAC address."
|
|
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 6 }
|
|
|
|
--
|
|
-- PW service status table - pw-service-status-table
|
|
--
|
|
genEquipServicesNGPWServiceStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWServiceStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains status information of existing PW services."
|
|
::= { genEquipServicesNGPW 8 }
|
|
|
|
genEquipServicesNGPWServiceStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWServiceStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry contains status information of existing PW services."
|
|
INDEX { genEquipServicesNGPWServiceStatusSlotID, genEquipServicesNGPWServiceStatusID }
|
|
::= { genEquipServicesNGPWServiceStatusTable 1 }
|
|
|
|
GenEquipServicesNGPWServiceStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWServiceStatusSlotID
|
|
INTEGER,
|
|
genEquipServicesNGPWServiceStatusID
|
|
INTEGER,
|
|
genEquipServicesNGPWServiceStatusOperStatus
|
|
DownUp,
|
|
genEquipServicesNGPWServiceStatusClearStats
|
|
NoYes,
|
|
genEquipServicesNGPWServiceStatusTxPkts
|
|
Counter64,
|
|
genEquipServicesNGPWServiceStatusReceivedPkts
|
|
Counter64,
|
|
genEquipServicesNGPWServiceStatusTransitionsLOPS
|
|
Counter64,
|
|
genEquipServicesNGPWServiceStatusJitterBufferOverruns
|
|
Counter64,
|
|
genEquipServicesNGPWServiceStatusBufferDeviations
|
|
Counter64,
|
|
genEquipServicesNGPWServiceStatusMinJitterCount
|
|
Counter64,
|
|
genEquipServicesNGPWServiceStatusMaxJitterCount
|
|
Counter64
|
|
}
|
|
|
|
genEquipServicesNGPWServiceStatusSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 1 }
|
|
|
|
genEquipServicesNGPWServiceStatusID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pseudowire ID."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 2 }
|
|
|
|
genEquipServicesNGPWServiceStatusOperStatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the operational status of PW service."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 3 }
|
|
|
|
genEquipServicesNGPWServiceStatusClearStats OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clear all statistics for this PW service."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 4 }
|
|
|
|
genEquipServicesNGPWServiceStatusTxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of transmitted packets."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 5 }
|
|
|
|
genEquipServicesNGPWServiceStatusReceivedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of received packets."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 6 }
|
|
|
|
genEquipServicesNGPWServiceStatusTransitionsLOPS OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of transitions from the normal state to the LOPS."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 7 }
|
|
|
|
genEquipServicesNGPWServiceStatusJitterBufferOverruns OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of jitter buffer overruns."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 8 }
|
|
|
|
genEquipServicesNGPWServiceStatusBufferDeviations OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Max Jitter Buffer Deviation."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 9 }
|
|
|
|
genEquipServicesNGPWServiceStatusMinJitterCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum jitter buffer usage registered for the last second."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 10 }
|
|
|
|
genEquipServicesNGPWServiceStatusMaxJitterCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum jitter buffer usage registered for the last second."
|
|
::= { genEquipServicesNGPWServiceStatusEntry 11 }
|
|
|
|
--
|
|
-- PW TDM port status table - pw-tdm-port-status-table and pw-tdm-port-loopback-status-table
|
|
--
|
|
genEquipServicesNGPWTDMPortsStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWTDMPortsStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains status information about TDM ports."
|
|
::= { genEquipServicesNGPW 9 }
|
|
|
|
genEquipServicesNGPWTDMPortsStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWTDMPortsStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry contains status information about TDM ports."
|
|
INDEX { genEquipServicesNGPWTDMPortsStatusIfIndex }
|
|
::= { genEquipServicesNGPWTDMPortsStatusTable 1 }
|
|
|
|
GenEquipServicesNGPWTDMPortsStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWTDMPortsStatusSlotID
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsStatusPort
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsStatusIfIndex
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsStatusOperStatus
|
|
DownUp,
|
|
genEquipServicesNGPWTDMPortsStatusLoopbackCounter
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsStatusActualLoopback
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsStatusLineStatus
|
|
INTEGER,
|
|
genEquipServicesNGPWTDMPortsStatusLoopback
|
|
TDMLoopbackType
|
|
}
|
|
|
|
genEquipServicesNGPWTDMPortsStatusSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWTDMPortsStatusEntry 1 }
|
|
|
|
genEquipServicesNGPWTDMPortsStatusPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Physical port number in the card."
|
|
::= { genEquipServicesNGPWTDMPortsStatusEntry 2 }
|
|
|
|
genEquipServicesNGPWTDMPortsStatusIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ifIndex."
|
|
::= { genEquipServicesNGPWTDMPortsStatusEntry 3 }
|
|
|
|
genEquipServicesNGPWTDMPortsStatusOperStatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Operational state of the port."
|
|
::= { genEquipServicesNGPWTDMPortsStatusEntry 4 }
|
|
|
|
genEquipServicesNGPWTDMPortsStatusLoopbackCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Loopback time left (in seconds)"
|
|
::= { genEquipServicesNGPWTDMPortsStatusEntry 5 }
|
|
|
|
genEquipServicesNGPWTDMPortsStatusActualLoopback OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Actual status of loopback on this TDM port reported by the card."
|
|
::= { genEquipServicesNGPWTDMPortsStatusEntry 6 }
|
|
|
|
genEquipServicesNGPWTDMPortsStatusLineStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Currently present line-level PDH alarms."
|
|
::= { genEquipServicesNGPWTDMPortsStatusEntry 7 }
|
|
|
|
genEquipServicesNGPWTDMPortsStatusLoopback OBJECT-TYPE
|
|
SYNTAX TDMLoopbackType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of required loopback on this TDM port."
|
|
::= { genEquipServicesNGPWTDMPortsStatusEntry 8 }
|
|
|
|
--
|
|
-- Bundle status table - pw-bundle-status-table
|
|
--
|
|
genEquipServicesNGPWBundlesStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the current staus for bundles."
|
|
::= { genEquipServicesNGPW 10 }
|
|
|
|
genEquipServicesNGPWBundlesStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWBundlesStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the current staus for bundles."
|
|
INDEX { genEquipServicesNGPWBundlesStatusSlotID, genEquipServicesNGPWBundlesStatusBundleId }
|
|
::= { genEquipServicesNGPWBundlesStatusTable 1 }
|
|
|
|
GenEquipServicesNGPWBundlesStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWBundlesStatusSlotID
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesStatusBundleId
|
|
INTEGER,
|
|
genEquipServicesNGPWBundlesStatusOperStatus
|
|
DownUp
|
|
}
|
|
|
|
genEquipServicesNGPWBundlesStatusSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWBundlesStatusEntry 1 }
|
|
|
|
genEquipServicesNGPWBundlesStatusBundleId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bundle ID."
|
|
::= { genEquipServicesNGPWBundlesStatusEntry 2 }
|
|
|
|
genEquipServicesNGPWBundlesStatusOperStatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bundle operational state."
|
|
::= { genEquipServicesNGPWBundlesStatusEntry 3 }
|
|
|
|
--
|
|
-- PW Tunnel group configuration table - pw-psn-tunnel-group-configuration-table
|
|
--
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of groups of tunnels for PW path protection."
|
|
::= { genEquipServicesNGPW 11 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWPSNTunnelGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of groups of tunnels for PW path protection."
|
|
INDEX { genEquipServicesNGPWPSNTunnelGroupSlot,
|
|
genEquipServicesNGPWPSNTunnelGroupId }
|
|
::= { genEquipServicesNGPWPSNTunnelGroupTable 1 }
|
|
|
|
GenEquipServicesNGPWPSNTunnelGroupEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWPSNTunnelGroupSlot
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelGroupId
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelGroupPrimaryId
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelGroupSecondaryId
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelGroupAdmin
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWPSNTunnelGroupRevertive
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWPSNTunnelGroupProtectionMode
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWPSNTunnelGroupRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupSlot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWPSNTunnelGroupEntry 1 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the corresponding PSN Tunnel Protection Group."
|
|
::= { genEquipServicesNGPWPSNTunnelGroupEntry 2 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupPrimaryId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Tunnel ID for the primary path."
|
|
|
|
::= { genEquipServicesNGPWPSNTunnelGroupEntry 3 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupSecondaryId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Tunnel ID for the secondary path."
|
|
|
|
::= { genEquipServicesNGPWPSNTunnelGroupEntry 4 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Admin."
|
|
|
|
::= { genEquipServicesNGPWPSNTunnelGroupEntry 5 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupRevertive OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable for revertive protection. Default is disabled."
|
|
|
|
::= { genEquipServicesNGPWPSNTunnelGroupEntry 6 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupProtectionMode OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Protection mode 1+1."
|
|
|
|
::= { genEquipServicesNGPWPSNTunnelGroupEntry 7 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesNGPWPSNTunnelGroupEntry 30 }
|
|
|
|
--
|
|
-- PW Tunnel group status table - pw-psn-tunnel-group-status-table
|
|
--
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelGroupStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains status of path protection tunnels."
|
|
::= { genEquipServicesNGPW 12 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWPSNTunnelGroupStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry contains status of path protection tunnels."
|
|
INDEX { genEquipServicesNGPWPSNTunnelGroupStatusSlot,
|
|
genEquipServicesNGPWPSNTunnelGroupStatusId }
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusTable 1 }
|
|
|
|
GenEquipServicesNGPWPSNTunnelGroupStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWPSNTunnelGroupStatusSlot
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelGroupStatusId
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelGroupStatusOperStatus
|
|
DownUp,
|
|
genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand
|
|
TunnelGroupProtectionCmd,
|
|
genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel
|
|
INTEGER,
|
|
genEquipServicesNGPWPSNTunnelGroupStatusClearStats
|
|
OffOn,
|
|
genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown
|
|
INTEGER
|
|
}
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusSlot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 1 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Tunnel group ID."
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 2 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusOperStatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Tunnel group operational state."
|
|
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 3 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand OBJECT-TYPE
|
|
SYNTAX TunnelGroupProtectionCmd
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User command to perform a path protection switch."
|
|
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 4 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A counter of PSN tunnel protection switches."
|
|
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 5 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current active PSN tunnel."
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 6 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusClearStats OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User command to clear number of switches counter."
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 7 }
|
|
|
|
genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Time left until revertive switch is performed."
|
|
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 8 }
|
|
|
|
|
|
--
|
|
-- PW Maintenance Domain configuration table - pw-soam-md-configuration-table
|
|
--
|
|
|
|
genEquipServicesNGPWSOAMMDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMDEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of MD parameters at the PW card."
|
|
::= { genEquipServicesNGPW 13 }
|
|
|
|
genEquipServicesNGPWSOAMMDEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWSOAMMDEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of MD parameters at the PW card."
|
|
INDEX { genEquipServicesNGPWSOAMMDSlot,
|
|
genEquipServicesNGPWSOAMMDId }
|
|
::= { genEquipServicesNGPWSOAMMDTable 1 }
|
|
|
|
GenEquipServicesNGPWSOAMMDEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWSOAMMDSlot
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMDId
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMDName
|
|
DisplayString,
|
|
genEquipServicesNGPWSOAMMDLevel
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMDRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesNGPWSOAMMDSlot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipServicesNGPWSOAMMDEntry 1 }
|
|
|
|
genEquipServicesNGPWSOAMMDId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Domain ID."
|
|
::= { genEquipServicesNGPWSOAMMDEntry 2 }
|
|
|
|
genEquipServicesNGPWSOAMMDName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Domain Name."
|
|
|
|
::= { genEquipServicesNGPWSOAMMDEntry 3 }
|
|
|
|
genEquipServicesNGPWSOAMMDLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Domain level."
|
|
|
|
::= { genEquipServicesNGPWSOAMMDEntry 4 }
|
|
|
|
genEquipServicesNGPWSOAMMDRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status to allow user add entries dynamically."
|
|
|
|
::= { genEquipServicesNGPWSOAMMDEntry 30 }
|
|
|
|
--
|
|
-- PW Maintenance Association configuration table - pw-soam-ma-configuration-table
|
|
--
|
|
|
|
genEquipServicesNGPWSOAMMATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMAEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of MA parameters at the PW card."
|
|
::= { genEquipServicesNGPW 14 }
|
|
|
|
genEquipServicesNGPWSOAMMAEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWSOAMMAEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of MA parameters at the PW card."
|
|
INDEX { genEquipServicesNGPWSOAMMASlot,
|
|
genEquipServicesNGPWSOAMMAId }
|
|
::= { genEquipServicesNGPWSOAMMATable 1 }
|
|
|
|
GenEquipServicesNGPWSOAMMAEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWSOAMMASlot
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMAId
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMAName
|
|
DisplayString,
|
|
genEquipServicesNGPWSOAMMAMdId
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMALocalMepId
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMARemoteMepId
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMAVid
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMAVlanType
|
|
PWTunnelVlanType,
|
|
genEquipServicesNGPWSOAMMACCMAdmin
|
|
EnableDisableSMI2,
|
|
genEquipServicesNGPWSOAMMACCMInterval
|
|
PWSOAMccmInterval,
|
|
genEquipServicesNGPWSOAMMACCMLTMPriority
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMARowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesNGPWSOAMMASlot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot ID."
|
|
::= { genEquipServicesNGPWSOAMMAEntry 1 }
|
|
|
|
genEquipServicesNGPWSOAMMAId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance association ID."
|
|
::= { genEquipServicesNGPWSOAMMAEntry 2 }
|
|
|
|
genEquipServicesNGPWSOAMMAName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association name."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 3 }
|
|
|
|
genEquipServicesNGPWSOAMMAMdId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Domain ID."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 4 }
|
|
|
|
genEquipServicesNGPWSOAMMALocalMepId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Local MEP ID."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 5 }
|
|
|
|
genEquipServicesNGPWSOAMMARemoteMepId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote MEP ID."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 6 }
|
|
|
|
genEquipServicesNGPWSOAMMAVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN ID of the Maintenance Association."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 7 }
|
|
|
|
genEquipServicesNGPWSOAMMAVlanType OBJECT-TYPE
|
|
SYNTAX PWTunnelVlanType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN type of the Maintenance Association."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 8 }
|
|
|
|
genEquipServicesNGPWSOAMMACCMAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association CCM administrative status."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 9 }
|
|
|
|
genEquipServicesNGPWSOAMMACCMInterval OBJECT-TYPE
|
|
SYNTAX PWSOAMccmInterval
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association CCM Interval."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 10 }
|
|
|
|
genEquipServicesNGPWSOAMMACCMLTMPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association link trace message priority."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 11 }
|
|
|
|
genEquipServicesNGPWSOAMMARowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status to allow user add entries dynamically."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAEntry 30 }
|
|
|
|
--
|
|
-- PW Maintenance Association status table - pw-soam-ma-status-table
|
|
--
|
|
|
|
genEquipServicesNGPWSOAMMAStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMAStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table shows the SOAM status of each MA at the PW card level."
|
|
::= { genEquipServicesNGPW 15 }
|
|
|
|
genEquipServicesNGPWSOAMMAStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesNGPWSOAMMAStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry shows the SOAM status of each MA at the PW card level."
|
|
INDEX { genEquipServicesNGPWSOAMMAStatusSlot,
|
|
genEquipServicesNGPWSOAMMAStatusId }
|
|
::= { genEquipServicesNGPWSOAMMAStatusTable 1 }
|
|
|
|
GenEquipServicesNGPWSOAMMAStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesNGPWSOAMMAStatusSlot
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMAStatusId
|
|
INTEGER,
|
|
genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr
|
|
MacAddress,
|
|
genEquipServicesNGPWSOAMMAStatusDefects
|
|
INTEGER
|
|
}
|
|
|
|
genEquipServicesNGPWSOAMMAStatusSlot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot ID."
|
|
::= { genEquipServicesNGPWSOAMMAStatusEntry 1 }
|
|
|
|
genEquipServicesNGPWSOAMMAStatusId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance association ID."
|
|
::= { genEquipServicesNGPWSOAMMAStatusEntry 2 }
|
|
|
|
genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote MEP MAC Address."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAStatusEntry 3 }
|
|
|
|
genEquipServicesNGPWSOAMMAStatusDefects OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8), Cross-connection CCM (16), AIS (32)."
|
|
|
|
::= { genEquipServicesNGPWSOAMMAStatusEntry 4 }
|
|
|
|
--
|
|
-- Service TDM Scalars.
|
|
--
|
|
genEquipServicesNGPWTDM OBJECT IDENTIFIER ::= {genEquipServicesNGPW 20}
|
|
|
|
genEquipServicesNGPWTDMRevertiveTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The WTR (Wait To Restore) timer for revertive switches."
|
|
::= { genEquipServicesNGPWTDM 1 }
|
|
|
|
genEquipServicesNGPWRangeVC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM services VC range."
|
|
::= { genEquipServicesNGPWTDM 2 }
|
|
|
|
genEquipServicesNGPWOffsetVC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM services VC offset."
|
|
::= { genEquipServicesNGPWTDM 3 }
|
|
|
|
genEquipServicesNGPWLatencyOptimizationAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enables/Disables the option of choosing a latency-optimized mode for TDM services."
|
|
::= { genEquipServicesNGPWTDM 4 }
|
|
|
|
|
|
--
|
|
-- PSN tunnel groups table, (addition for PWC Phase-2)
|
|
--
|
|
genEquipServicesPWPSNTunnelGroupsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelGroupsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of PSN protection groups for pseudowire service path protection."
|
|
::= { genEquipServicesPW 10 }
|
|
|
|
genEquipServicesPWPSNTunnelGroupsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWPSNTunnelGroupsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This entry table allows configuration of PSN protection groups for pseudowire service path protection."
|
|
INDEX { genEquipServicesPWPSNTunnelGroupsTunnelGroupID }
|
|
::= { genEquipServicesPWPSNTunnelGroupsTable 1 }
|
|
|
|
GenEquipServicesPWPSNTunnelGroupsEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWPSNTunnelGroupsTunnelGroupID
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelGroupsTunnelIDPrimary
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelGroupsTunnelIDSecondary
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelGroupsSwitchToStandby
|
|
OffOn,
|
|
genEquipServicesPWPSNTunnelGroupsRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesPWPSNTunnelGroupsTunnelGroupID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel Group ID."
|
|
::= { genEquipServicesPWPSNTunnelGroupsEntry 1 }
|
|
|
|
genEquipServicesPWPSNTunnelGroupsTunnelIDPrimary OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Primary PSN tunnel ID."
|
|
|
|
::= { genEquipServicesPWPSNTunnelGroupsEntry 2 }
|
|
|
|
genEquipServicesPWPSNTunnelGroupsTunnelIDSecondary OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Secondary PSN tunnel ID."
|
|
|
|
::= { genEquipServicesPWPSNTunnelGroupsEntry 3 }
|
|
|
|
genEquipServicesPWPSNTunnelGroupsSwitchToStandby OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Force a switch from primary to secondary tunnel."
|
|
|
|
::= { genEquipServicesPWPSNTunnelGroupsEntry 4 }
|
|
|
|
genEquipServicesPWPSNTunnelGroupsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesPWPSNTunnelGroupsEntry 30 }
|
|
|
|
-- PSN tunnel groups status table, (addition for PWC Phase-2)
|
|
|
|
genEquipServicesPWPSNTunnelGroupStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelGroupStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows monitoring of PSN protection groups status."
|
|
::= { genEquipServicesPW 11 }
|
|
|
|
genEquipServicesPWPSNTunnelGroupStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWPSNTunnelGroupStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows monitoring of PSN protection groups status."
|
|
INDEX { genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID }
|
|
::= { genEquipServicesPWPSNTunnelGroupStatusTable 1 }
|
|
|
|
GenEquipServicesPWPSNTunnelGroupStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel
|
|
INTEGER,
|
|
genEquipServicesPWPSNTunnelGroupStatusNumProtSwitches
|
|
INTEGER
|
|
}
|
|
|
|
genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PSN Tunnel Group ID."
|
|
::= { genEquipServicesPWPSNTunnelGroupStatusEntry 1 }
|
|
|
|
genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(0),
|
|
secondary(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Currently active PSN tunnel."
|
|
|
|
::= { genEquipServicesPWPSNTunnelGroupStatusEntry 2 }
|
|
|
|
genEquipServicesPWPSNTunnelGroupStatusNumProtSwitches OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Counter of PSN tunnel protection switches."
|
|
|
|
::= { genEquipServicesPWPSNTunnelGroupStatusEntry 3 }
|
|
|
|
-- SOAM MD definitions table, (addition for PWC Phase-2)
|
|
|
|
genEquipServicesPWSOAMMDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWSOAMMDEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection."
|
|
::= { genEquipServicesPW 12 }
|
|
|
|
genEquipServicesPWSOAMMDEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWSOAMMDEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection."
|
|
INDEX { genEquipServicesPWSOAMMDDomainID }
|
|
::= { genEquipServicesPWSOAMMDTable 1 }
|
|
|
|
GenEquipServicesPWSOAMMDEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWSOAMMDDomainID
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMDDomainName
|
|
DisplayString,
|
|
genEquipServicesPWSOAMMDDomainLevel
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMDRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesPWSOAMMDDomainID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Domain ID."
|
|
::= { genEquipServicesPWSOAMMDEntry 1 }
|
|
|
|
genEquipServicesPWSOAMMDDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Domain Name."
|
|
|
|
::= { genEquipServicesPWSOAMMDEntry 2 }
|
|
|
|
genEquipServicesPWSOAMMDDomainLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Domain Level."
|
|
|
|
::= { genEquipServicesPWSOAMMDEntry 3 }
|
|
|
|
genEquipServicesPWSOAMMDRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesPWSOAMMDEntry 30 }
|
|
|
|
-- SOAM MA definitions table, (addition for PWC Phase-2)
|
|
|
|
genEquipServicesPWSOAMMATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesPWSOAMMAEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection."
|
|
::= { genEquipServicesPW 13 }
|
|
|
|
genEquipServicesPWSOAMMAEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesPWSOAMMAEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection."
|
|
INDEX { genEquipServicesPWSOAMMALocalID }
|
|
::= { genEquipServicesPWSOAMMATable 1 }
|
|
|
|
GenEquipServicesPWSOAMMAEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesPWSOAMMALocalID
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMALocalName
|
|
DisplayString,
|
|
genEquipServicesPWSOAMMADomainID
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMAAdmin
|
|
EnableDisable,
|
|
genEquipServicesPWSOAMMALocalMEP
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMARemoteMEP
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMAVlanType
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMAVlanID
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMACCMInterval
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMACCMAdmin
|
|
EnableDisable,
|
|
genEquipServicesPWSOAMMACCMPriority
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMARemoteMEPAddr
|
|
OCTET STRING,
|
|
genEquipServicesPWSOAMMADefects
|
|
INTEGER,
|
|
genEquipServicesPWSOAMMARowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipServicesPWSOAMMALocalID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association local ID."
|
|
::= { genEquipServicesPWSOAMMAEntry 1 }
|
|
|
|
genEquipServicesPWSOAMMALocalName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association local Name."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 2 }
|
|
|
|
genEquipServicesPWSOAMMADomainID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association domain ID."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 3 }
|
|
|
|
genEquipServicesPWSOAMMAAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association Admin."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 4 }
|
|
|
|
genEquipServicesPWSOAMMALocalMEP OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8191)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association local MEP ID."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 5 }
|
|
|
|
genEquipServicesPWSOAMMARemoteMEP OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8191)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association remote MEP ID."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 6 }
|
|
|
|
genEquipServicesPWSOAMMAVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
c-type(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN type of the Maintenance Association."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 7 }
|
|
|
|
genEquipServicesPWSOAMMAVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4090)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VLAN Id of the Maintenance Association."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 8 }
|
|
|
|
genEquipServicesPWSOAMMACCMInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nInvalid(0),
|
|
n3-3-msec(1),
|
|
n10-msec(2),
|
|
n100-msec(3),
|
|
n1s(4),
|
|
n10s(5),
|
|
n1min(6),
|
|
n10min(7)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CCM Interval."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 9 }
|
|
|
|
genEquipServicesPWSOAMMACCMAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maintenance Association CCM admin."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 10 }
|
|
|
|
genEquipServicesPWSOAMMACCMPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CCM Priority."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 11 }
|
|
|
|
genEquipServicesPWSOAMMARemoteMEPAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC Address of the Maintenance Association Remote MEP."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 12 }
|
|
|
|
genEquipServicesPWSOAMMADefects OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8),
|
|
Cross-connection CCM (16), AIS (32)."
|
|
|
|
::= { genEquipServicesPWSOAMMAEntry 13 }
|
|
|
|
genEquipServicesPWSOAMMARowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the status of the entry."
|
|
::= { genEquipServicesPWSOAMMAEntry 30 }
|
|
|
|
|
|
--
|
|
-- The following are the Services part of Switch application tables
|
|
--
|
|
genEquipServicesCet OBJECT IDENTIFIER ::= {genEquipServices 5}
|
|
|
|
genEquipServicesCetGeneral OBJECT IDENTIFIER ::= {genEquipServicesCet 1}
|
|
|
|
genEquipServicesCetSvlanEtherType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ether-type-0x88a8(0),
|
|
ether-type-0x9100(1),
|
|
ether-type-0x9200(2),
|
|
ether-type-0x8100(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"S VLAN Ether type."
|
|
::= { genEquipServicesCetGeneral 1 }
|
|
|
|
genEquipServicesCetAgingTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (15..3825)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC forwarding entry aging timeout in seconds."
|
|
::= { genEquipServicesCetGeneral 2 }
|
|
|
|
|
|
--
|
|
-- Switch Application sw-ap-l3-srv-config-table
|
|
--
|
|
|
|
genEquipServicesCetConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesCetConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Services configuration table -
|
|
the table describes the connectivity between the interface of the switch."
|
|
::= { genEquipServicesCet 2 }
|
|
|
|
genEquipServicesCetConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesCetConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Services configuration table entry -
|
|
the table describes the connectivity between the interface of the switch."
|
|
INDEX { genEquipServicesCetConfigIndex }
|
|
::= { genEquipServicesCetConfigTable 1 }
|
|
|
|
GenEquipServicesCetConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesCetConfigIndex
|
|
INTEGER,
|
|
genEquipServicesCetConfigType
|
|
ServiceType,
|
|
genEquipServicesCetConfigAdmin
|
|
ServiceAdmin,
|
|
genEquipServicesCetConfigMacTableSize
|
|
INTEGER,
|
|
genEquipServicesCetConfigDefaultCos
|
|
INTEGER,
|
|
genEquipServicesCetConfigCosMode
|
|
ServiceCosMode,
|
|
genEquipServicesCetConfigEvcId
|
|
DisplayString,
|
|
genEquipServicesCetConfigEvcDescription
|
|
DisplayString,
|
|
genEquipServicesCetConfigSplitHorizon
|
|
EnableDisable,
|
|
genEquipServicesCetConfigResiliencyProtocolInstance
|
|
INTEGER,
|
|
genEquipServicesCetConfigProtectingTrail
|
|
INTEGER,
|
|
genEquipServicesCetConfigProtectingTrailIndex
|
|
INTEGER,
|
|
genEquipServicesCetConfigServiceSubType
|
|
ServiceSubType,
|
|
genEquipServicesCetConfigTrailIndex
|
|
INTEGER,
|
|
genEquipServicesCetConfigRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipServicesCetConfigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1025)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service ID."
|
|
::= { genEquipServicesCetConfigEntry 1 }
|
|
|
|
genEquipServicesCetConfigType OBJECT-TYPE
|
|
SYNTAX ServiceType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Service Type (Management, MP, P2P)."
|
|
::= { genEquipServicesCetConfigEntry 2 }
|
|
|
|
genEquipServicesCetConfigAdmin OBJECT-TYPE
|
|
SYNTAX ServiceAdmin
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Admin state."
|
|
::= { genEquipServicesCetConfigEntry 3 }
|
|
|
|
genEquipServicesCetConfigMacTableSize OBJECT-TYPE
|
|
SYNTAX INTEGER (16..131072)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC Table size of the service,granularity of 16."
|
|
::= { genEquipServicesCetConfigEntry 4 }
|
|
|
|
genEquipServicesCetConfigDefaultCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service default CoS."
|
|
::= { genEquipServicesCetConfigEntry 5 }
|
|
|
|
genEquipServicesCetConfigCosMode OBJECT-TYPE
|
|
SYNTAX ServiceCosMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service CoS Color mode."
|
|
::= { genEquipServicesCetConfigEntry 6 }
|
|
|
|
genEquipServicesCetConfigEvcId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Virtual Connection (EVC) ID."
|
|
::= { genEquipServicesCetConfigEntry 7 }
|
|
|
|
genEquipServicesCetConfigEvcDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Virtual Connection (EVC) Description."
|
|
::= { genEquipServicesCetConfigEntry 8 }
|
|
|
|
genEquipServicesCetConfigSplitHorizon OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Split Horizon group Admin."
|
|
::= { genEquipServicesCetConfigEntry 9 }
|
|
|
|
genEquipServicesCetConfigResiliencyProtocolInstance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resiliency Protocol Instance."
|
|
::= { genEquipServicesCetConfigEntry 10 }
|
|
|
|
genEquipServicesCetConfigProtectingTrail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Protecting trail."
|
|
::= { genEquipServicesCetConfigEntry 11 }
|
|
|
|
genEquipServicesCetConfigProtectingTrailIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Protecting trail id."
|
|
::= { genEquipServicesCetConfigEntry 12 }
|
|
|
|
genEquipServicesCetConfigServiceSubType OBJECT-TYPE
|
|
SYNTAX ServiceSubType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service sub type (Ethernet / TDM / PWE)"
|
|
::= { genEquipServicesCetConfigEntry 13 }
|
|
|
|
genEquipServicesCetConfigTrailIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM Trail ID"
|
|
::= { genEquipServicesCetConfigEntry 14 }
|
|
|
|
genEquipServicesCetConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipServicesCetConfigEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-srv-status-multicast
|
|
--
|
|
|
|
genEquipServicesCetStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesCetStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Services status table - the table describes the status of the configured services."
|
|
::= { genEquipServicesCet 3 }
|
|
|
|
genEquipServicesCetStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesCetStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Services status table - the table describes the status of the configured services entry."
|
|
INDEX { genEquipServicesCetStatusIndex }
|
|
::= { genEquipServicesCetStatusTable 1 }
|
|
|
|
GenEquipServicesCetStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesCetStatusIndex
|
|
INTEGER,
|
|
genEquipServicesCetStatusMulticast
|
|
EnableDisable
|
|
}
|
|
|
|
|
|
genEquipServicesCetStatusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1025)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service ID."
|
|
::= { genEquipServicesCetStatusEntry 1 }
|
|
|
|
genEquipServicesCetStatusMulticast OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configured Multicast Group."
|
|
::= { genEquipServicesCetStatusEntry 2 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l4-srv-sp-config-table
|
|
--
|
|
genEquipServicesCetSpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesCetSpConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Service Points (SP) configuration table -
|
|
this table describes the ingress and egress attributes (operation) per SPs of each service."
|
|
::= { genEquipServicesCet 4 }
|
|
|
|
genEquipServicesCetSpConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesCetSpConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Service Points (SP) configuration table entry -
|
|
this table describes the ingress and egress attributes (operation) per SPs of each service."
|
|
INDEX { genEquipServicesCetSpConfigServiceIndex,
|
|
genEquipServicesCetSpConfigServicePointIndex }
|
|
::= { genEquipServicesCetSpConfigTable 1 }
|
|
|
|
GenEquipServicesCetSpConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesCetSpConfigServiceIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigServicePointIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigSpType
|
|
SPType,
|
|
genEquipServicesCetSpConfigSpSubtype
|
|
SPSubType,
|
|
genEquipServicesCetSpConfigSpName
|
|
DisplayString,
|
|
genEquipServicesCetSpConfigIfIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigSvlanEncap
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigCvlanEncap
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigLearning
|
|
EnableDisable,
|
|
genEquipServicesCetSpConfigFlooding
|
|
DisableAllowed,
|
|
genEquipServicesCetSpConfigBroadcast
|
|
DisableAllowed,
|
|
genEquipServicesCetSpConfigCosMode
|
|
SPCosMode,
|
|
genEquipServicesCetSpConfigDefCos
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigPclProfileId
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigPclAdmin
|
|
EnableDisable,
|
|
genEquipServicesCetSpConfigMonitorCounterGroup
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigSplitHorizon
|
|
SplitHorizonGroup,
|
|
genEquipServicesCetSpConfigSvlanEgressPreserve
|
|
EnableDisable,
|
|
genEquipServicesCetSpConfigSvlanCosPreserve
|
|
EnableDisable,
|
|
genEquipServicesCetSpConfigCvlanEgressPreserve
|
|
EnableDisable,
|
|
genEquipServicesCetSpConfigCvlanCosPreserve
|
|
EnableDisable,
|
|
genEquipServicesCetSpConfigMarkingMode
|
|
EnableDisable,
|
|
genEquipServicesCetSpConfigServiceClassId
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigTcamClassification
|
|
INTEGER,
|
|
genEquipServicesCetSpConfigRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipServicesCetSpConfigServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1025)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service ID."
|
|
::= { genEquipServicesCetSpConfigEntry 1 }
|
|
|
|
genEquipServicesCetSpConfigServicePointIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point ID."
|
|
::= { genEquipServicesCetSpConfigEntry 2 }
|
|
|
|
genEquipServicesCetSpConfigSpType OBJECT-TYPE
|
|
SYNTAX SPType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point Type (SAP, SNP, PIPE, MNG)."
|
|
::= { genEquipServicesCetSpConfigEntry 3 }
|
|
|
|
genEquipServicesCetSpConfigSpSubtype OBJECT-TYPE
|
|
SYNTAX SPSubType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Service Point Attached Interface Type."
|
|
::= { genEquipServicesCetSpConfigEntry 4 }
|
|
|
|
genEquipServicesCetSpConfigSpName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point Name."
|
|
::= { genEquipServicesCetSpConfigEntry 5 }
|
|
|
|
genEquipServicesCetSpConfigIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index ID."
|
|
::= { genEquipServicesCetSpConfigEntry 6 }
|
|
|
|
genEquipServicesCetSpConfigSvlanEncap OBJECT-TYPE
|
|
SYNTAX INTEGER (4096..4097)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"S-Vlan Encapsulation."
|
|
::= { genEquipServicesCetSpConfigEntry 7 }
|
|
|
|
genEquipServicesCetSpConfigCvlanEncap OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4097)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C-Vlan Encapsulation."
|
|
::= { genEquipServicesCetSpConfigEntry 8 }
|
|
|
|
genEquipServicesCetSpConfigLearning OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point Learning Admin (disable / enable)."
|
|
::= { genEquipServicesCetSpConfigEntry 9 }
|
|
|
|
genEquipServicesCetSpConfigFlooding OBJECT-TYPE
|
|
SYNTAX DisableAllowed
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Ingress aatribute - Allow Flooding of the incoming packet."
|
|
::= { genEquipServicesCetSpConfigEntry 10 }
|
|
|
|
genEquipServicesCetSpConfigBroadcast OBJECT-TYPE
|
|
SYNTAX DisableAllowed
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Ingress aatribute - Allow Broadcast of the incoming packet."
|
|
::= { genEquipServicesCetSpConfigEntry 11 }
|
|
|
|
genEquipServicesCetSpConfigCosMode OBJECT-TYPE
|
|
SYNTAX SPCosMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point CoS Color mode."
|
|
::= { genEquipServicesCetSpConfigEntry 12 }
|
|
|
|
genEquipServicesCetSpConfigDefCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point Default CoS."
|
|
::= { genEquipServicesCetSpConfigEntry 13 }
|
|
|
|
genEquipServicesCetSpConfigPclProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"pcl-profile-id."
|
|
::= { genEquipServicesCetSpConfigEntry 14 }
|
|
|
|
genEquipServicesCetSpConfigPclAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PCL Admin."
|
|
::= { genEquipServicesCetSpConfigEntry 15 }
|
|
|
|
genEquipServicesCetSpConfigMonitorCounterGroup OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Ingress attribute - Assign the SP to a specific Monitor Counters Group."
|
|
::= { genEquipServicesCetSpConfigEntry 16 }
|
|
|
|
genEquipServicesCetSpConfigSplitHorizon OBJECT-TYPE
|
|
SYNTAX SplitHorizonGroup
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Split Horizon Group."
|
|
::= { genEquipServicesCetSpConfigEntry 17 }
|
|
|
|
genEquipServicesCetSpConfigSvlanEgressPreserve OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Egress attribute - Preserve the S VLAN as it was on the Ingress Service Point."
|
|
::= { genEquipServicesCetSpConfigEntry 18 }
|
|
|
|
genEquipServicesCetSpConfigSvlanCosPreserve OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Egress attribute - Preserve the S VLAN CoS as it was on the Ingress Service Point."
|
|
::= { genEquipServicesCetSpConfigEntry 19 }
|
|
|
|
genEquipServicesCetSpConfigCvlanEgressPreserve OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Egress attribute - Preserve the C VLAN as it was on the Ingress Service Point."
|
|
::= { genEquipServicesCetSpConfigEntry 20 }
|
|
|
|
genEquipServicesCetSpConfigCvlanCosPreserve OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Egress attribute - Preserve the C VLAN CoS as it was on the Ingress Service Point."
|
|
::= { genEquipServicesCetSpConfigEntry 21 }
|
|
|
|
genEquipServicesCetSpConfigMarkingMode OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Ingress attribute - Enable / Disable Marking of the incoming packet."
|
|
::= { genEquipServicesCetSpConfigEntry 22 }
|
|
|
|
genEquipServicesCetSpConfigServiceClassId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SP Egress attribute - Service Bundle ID."
|
|
::= { genEquipServicesCetSpConfigEntry 23 }
|
|
|
|
genEquipServicesCetSpConfigTcamClassification OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TCAM-Classification."
|
|
::= { genEquipServicesCetSpConfigEntry 24 }
|
|
|
|
genEquipServicesCetSpConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipServicesCetSpConfigEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l4-srv-sp-ingress-policer-profile-association-to-cos-table
|
|
--
|
|
|
|
genEquipServicesCetSpPolicerAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesCetSpPolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point and Service Point CoS Policing configuration table."
|
|
::= { genEquipServicesCet 5 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesCetSpPolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point and Service Point CoS Policing configuration table."
|
|
INDEX { genEquipServicesCetSpPolicerAssociationServiceIndex,
|
|
genEquipServicesCetSpPolicerAssociationSpIndex }
|
|
::= { genEquipServicesCetSpPolicerAssociationTable 1 }
|
|
|
|
GenEquipServicesCetSpPolicerAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesCetSpPolicerAssociationServiceIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationSpIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationSpPolicerAdmin
|
|
EnableDisable,
|
|
genEquipServicesCetSpPolicerAssociationCos0Profile
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos0Admin
|
|
EnableDisable,
|
|
genEquipServicesCetSpPolicerAssociationCos1Profile
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos1Admin
|
|
EnableDisable,
|
|
genEquipServicesCetSpPolicerAssociationCos2Profile
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos2Admin
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos3Profile
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos3Admin
|
|
DisableAllowed,
|
|
genEquipServicesCetSpPolicerAssociationCos4Profile
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos4Admin
|
|
EnableDisable,
|
|
genEquipServicesCetSpPolicerAssociationCos5Profile
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos5Admin
|
|
EnableDisable,
|
|
genEquipServicesCetSpPolicerAssociationCos6Profile
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos6Admin
|
|
EnableDisable,
|
|
genEquipServicesCetSpPolicerAssociationCos7Profile
|
|
INTEGER,
|
|
genEquipServicesCetSpPolicerAssociationCos7Admin
|
|
EnableDisable,
|
|
genEquipServicesCetSpPolicerAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipServicesCetSpPolicerAssociationServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1025)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 1 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationSpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 2 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationSpPolicerAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 3 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos0Profile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 0 Policer attached Profile ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 4 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos0Admin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 0 Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 5 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos1Profile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 1 Policer attached Profile ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 6 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos1Admin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 1 Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 7 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos2Profile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 2 Policer attached Profile ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 8 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos2Admin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 2 Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 9 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos3Profile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 3 Policer attached Profile ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 10 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos3Admin OBJECT-TYPE
|
|
SYNTAX DisableAllowed
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 3 Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 11 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos4Profile OBJECT-TYPE
|
|
SYNTAX SPCosMode (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 4 Policer attached Profile ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 12 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos4Admin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 4 Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 13 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos5Profile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 5 Policer attached Profile ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 14 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos5Admin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 5 Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 15 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos6Profile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 6 Policer attached Profile ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 16 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos6Admin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 6 Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 17 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos7Profile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 7 Policer attached Profile ID."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 18 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationCos7Admin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 7 Policer Admin (enable / disable)."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 19 }
|
|
|
|
genEquipServicesCetSpPolicerAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipServicesCetSpPolicerAssociationEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l4-srv-sp-vlan-config-table
|
|
--
|
|
|
|
genEquipServicesCetSpVlanMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesCetSpVlanMappingEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point."
|
|
::= { genEquipServicesCet 6 }
|
|
|
|
genEquipServicesCetSpVlanMappingEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesCetSpVlanMappingEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point."
|
|
INDEX { genEquipServicesCetSpVlanMappingServiceId,
|
|
genEquipServicesCetSpVlanMappingSpId,
|
|
genEquipServicesCetSpVlanMappingSvlanIndex,
|
|
genEquipServicesCetSpVlanMappingCvlanIndex }
|
|
::= { genEquipServicesCetSpVlanMappingTable 1 }
|
|
|
|
GenEquipServicesCetSpVlanMappingEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesCetSpVlanMappingServiceId
|
|
INTEGER,
|
|
genEquipServicesCetSpVlanMappingSpId
|
|
INTEGER,
|
|
genEquipServicesCetSpVlanMappingSvlanIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpVlanMappingCvlanIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpVlanMappingVlanCosOverride
|
|
TrueFalse,
|
|
genEquipServicesCetSpVlanMappingVlanDefCos
|
|
INTEGER,
|
|
genEquipServicesCetSpVlanMappingColor
|
|
GreenYellow,
|
|
genEquipServicesCetSpVlanMappingIfIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpVlanMappingIfSlotIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpVlanMappingIfPortIndex
|
|
INTEGER,
|
|
genEquipServicesCetSpVlanMappingRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipServicesCetSpVlanMappingServiceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1025)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service ID."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 1 }
|
|
|
|
genEquipServicesCetSpVlanMappingSpId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point ID."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 2 }
|
|
|
|
genEquipServicesCetSpVlanMappingSvlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4097)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"S-Vlan Encapsulation."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 3 }
|
|
|
|
genEquipServicesCetSpVlanMappingCvlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4097)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C-Vlan Encapsulation."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 4 }
|
|
|
|
genEquipServicesCetSpVlanMappingVlanCosOverride OBJECT-TYPE
|
|
SYNTAX TrueFalse
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The CoS Value field is valid."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 5 }
|
|
|
|
genEquipServicesCetSpVlanMappingVlanDefCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS overwrite value."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 6 }
|
|
|
|
genEquipServicesCetSpVlanMappingColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Point COLOR."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 7 }
|
|
|
|
genEquipServicesCetSpVlanMappingIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 8 }
|
|
|
|
genEquipServicesCetSpVlanMappingIfSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot index."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 9 }
|
|
|
|
genEquipServicesCetSpVlanMappingIfPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port index."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 10 }
|
|
|
|
genEquipServicesCetSpVlanMappingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipServicesCetSpVlanMappingEntry 30 }
|
|
|
|
--
|
|
-- Clear all interface egress queues statistics - sw-ap-l2-if-logical-egress-clear-all-queues-statistics-table
|
|
--
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clear all interface egress queues statistics."
|
|
::= { genEquipServicesCet 7 }
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clear all interface egress queues statistics."
|
|
INDEX { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex }
|
|
::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTable 1 }
|
|
|
|
GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex
|
|
INTEGER,
|
|
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead
|
|
NoYes
|
|
}
|
|
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ifIndex."
|
|
::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry 1 }
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clear all statistics for the specific port."
|
|
::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry 2 }
|
|
|
|
--
|
|
-- Clear all Service egress queues statistics - sw-ap-l3-srv-egress-clear-all-queues-statistics-table
|
|
--
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clear all Service egress queues statistics."
|
|
::= { genEquipServicesCet 8 }
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clear all Service egress queues statistics."
|
|
INDEX { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex,
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex }
|
|
::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTable 1 }
|
|
|
|
GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex
|
|
INTEGER,
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex
|
|
INTEGER,
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead
|
|
NoYes
|
|
}
|
|
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ifIndex."
|
|
::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 1 }
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Egress service bundle ID."
|
|
::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 2 }
|
|
|
|
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"clear on read."
|
|
::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 3 }
|
|
|
|
|
|
--
|
|
-- The following are the Services part of Switch application tables
|
|
--
|
|
genEquipServicesTM OBJECT IDENTIFIER ::= {genEquipServices 6}
|
|
|
|
-- TM Mapping
|
|
genEquipTmMapping OBJECT IDENTIFIER ::= {genEquipServicesTM 1}
|
|
|
|
--
|
|
-- Switch Application sw-ap-global-ingress-mapping-802_1ad-up-to-cos-table
|
|
--
|
|
|
|
genEquipTmMappingSVlanPriToCosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmMappingSVlanPriToCosEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global 802.1AD classification table to CoS and Color."
|
|
::= { genEquipTmMapping 1 }
|
|
|
|
genEquipTmMappingSVlanPriToCosEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmMappingSVlanPriToCosEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global 802.1AD classification table to CoS and Color entry."
|
|
INDEX { genEquipTmMappingSVlanPriToCosUpIndex,
|
|
genEquipTmMappingSVlanPriToCosDeiIndex }
|
|
::= { genEquipTmMappingSVlanPriToCosTable 1 }
|
|
|
|
GenEquipTmMappingSVlanPriToCosEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmMappingSVlanPriToCosUpIndex
|
|
INTEGER,
|
|
genEquipTmMappingSVlanPriToCosDeiIndex
|
|
INTEGER,
|
|
genEquipTmMappingSVlanPriToCosCos
|
|
INTEGER,
|
|
genEquipTmMappingSVlanPriToCosColor
|
|
GreenYellow
|
|
}
|
|
|
|
|
|
genEquipTmMappingSVlanPriToCosUpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User Priority bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingSVlanPriToCosEntry 1 }
|
|
|
|
genEquipTmMappingSVlanPriToCosDeiIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"DEI bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingSVlanPriToCosEntry 2 }
|
|
|
|
genEquipTmMappingSVlanPriToCosCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingSVlanPriToCosEntry 3 }
|
|
|
|
genEquipTmMappingSVlanPriToCosColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingSVlanPriToCosEntry 4 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-global-ingress-mapping-802_1q-up-to-cos-table
|
|
--
|
|
|
|
genEquipTmMappingCVlanPriToCosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmMappingCVlanPriToCosEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global 802.1Q classification table to CoS and Color."
|
|
::= { genEquipTmMapping 2 }
|
|
|
|
genEquipTmMappingCVlanPriToCosEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmMappingCVlanPriToCosEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global 802.1Q classification table to CoS and Color entry."
|
|
INDEX { genEquipTmMappingCVlanPriToCosUpIndex,
|
|
genEquipTmMappingCVlanPriToCosCfiIndex }
|
|
::= { genEquipTmMappingCVlanPriToCosTable 1 }
|
|
|
|
GenEquipTmMappingCVlanPriToCosEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmMappingCVlanPriToCosUpIndex
|
|
INTEGER,
|
|
genEquipTmMappingCVlanPriToCosCfiIndex
|
|
INTEGER,
|
|
genEquipTmMappingCVlanPriToCosCos
|
|
INTEGER,
|
|
genEquipTmMappingCVlanPriToCosColor
|
|
GreenYellow
|
|
}
|
|
|
|
|
|
genEquipTmMappingCVlanPriToCosUpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User Priority bits - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingCVlanPriToCosEntry 1 }
|
|
|
|
genEquipTmMappingCVlanPriToCosCfiIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CFI bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingCVlanPriToCosEntry 2 }
|
|
|
|
genEquipTmMappingCVlanPriToCosCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingCVlanPriToCosEntry 3 }
|
|
|
|
genEquipTmMappingCVlanPriToCosColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingCVlanPriToCosEntry 4 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-global-ingress-mapping-dscp-to-cos-table
|
|
--
|
|
|
|
genEquipTmMappingDscpToCosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmMappingDscpToCosEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global DSCP bits classification table to CoS and Color."
|
|
::= { genEquipTmMapping 3 }
|
|
|
|
genEquipTmMappingDscpToCosEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmMappingDscpToCosEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global DSCP bits classification table to CoS and Color entry."
|
|
INDEX { genEquipTmMappingDscpToCosDscpIndex }
|
|
::= { genEquipTmMappingDscpToCosTable 1 }
|
|
|
|
GenEquipTmMappingDscpToCosEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmMappingDscpToCosDscpIndex
|
|
INTEGER,
|
|
genEquipTmMappingDscpToCosBinary
|
|
OCTET STRING,
|
|
genEquipTmMappingDscpToCosDescription
|
|
DisplayString,
|
|
genEquipTmMappingDscpToCosCos
|
|
INTEGER,
|
|
genEquipTmMappingDscpToCosColor
|
|
GreenYellow
|
|
}
|
|
|
|
|
|
genEquipTmMappingDscpToCosDscpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..56)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"DSCP bits - Global DSCP bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingDscpToCosEntry 1 }
|
|
|
|
genEquipTmMappingDscpToCosBinary OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global DSCP bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingDscpToCosEntry 2 }
|
|
|
|
genEquipTmMappingDscpToCosDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"user description field - Global DSCP bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingDscpToCosEntry 3 }
|
|
|
|
genEquipTmMappingDscpToCosCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS bits - Global DSCP bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingDscpToCosEntry 4 }
|
|
|
|
genEquipTmMappingDscpToCosColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color bit - Global DSCP bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingDscpToCosEntry 5 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-mapping-mpls-exp-to-cos-color
|
|
--
|
|
|
|
genEquipTmMappingMPLSExpPriToCosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmMappingMPLSExpPriToCosEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color bit - Global MPLS EXP bits classification table to CoS and Color."
|
|
::= { genEquipTmMapping 4 }
|
|
|
|
genEquipTmMappingMPLSExpPriToCosEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmMappingMPLSExpPriToCosEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color bit - Global MPLS EXP bits classification table to CoS and Color entry."
|
|
INDEX { genEquipTmMappingMPLSExpPriToCosMplsExpIndex }
|
|
::= { genEquipTmMappingMPLSExpPriToCosTable 1 }
|
|
|
|
GenEquipTmMappingMPLSExpPriToCosEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmMappingMPLSExpPriToCosMplsExpIndex
|
|
INTEGER,
|
|
genEquipTmMappingMPLSExpPriToCosCos
|
|
INTEGER,
|
|
genEquipTmMappingMPLSExpPriToCosColor
|
|
GreenYellow
|
|
}
|
|
|
|
|
|
genEquipTmMappingMPLSExpPriToCosMplsExpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Experimental bits - Global MPLS EXP bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingMPLSExpPriToCosEntry 1 }
|
|
|
|
|
|
genEquipTmMappingMPLSExpPriToCosCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS bit - Global MPLS EXP bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingMPLSExpPriToCosEntry 2 }
|
|
|
|
genEquipTmMappingMPLSExpPriToCosColor OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color bit - Global MPLS EXP bits classification table to CoS and Color."
|
|
::= { genEquipTmMappingMPLSExpPriToCosEntry 3 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-global-egress-marking-802_1ad-table
|
|
--
|
|
|
|
genEquipTmMarkingSVlanPriTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmMarkingSVlanPriEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
|
|
::= { genEquipTmMapping 5 }
|
|
|
|
genEquipTmMarkingSVlanPriEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmMarkingSVlanPriEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI entry."
|
|
INDEX { genEquipTmMarkingSVlanPriCosIndex,
|
|
genEquipTmMarkingSVlanPriColorIndex }
|
|
::= { genEquipTmMarkingSVlanPriTable 1 }
|
|
|
|
GenEquipTmMarkingSVlanPriEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmMarkingSVlanPriCosIndex
|
|
INTEGER,
|
|
genEquipTmMarkingSVlanPriColorIndex
|
|
GreenYellow,
|
|
genEquipTmMarkingSVlanPriUserPriority
|
|
INTEGER,
|
|
genEquipTmMarkingSVlanPriDEI
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipTmMarkingSVlanPriCosIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
|
|
::= { genEquipTmMarkingSVlanPriEntry 1 }
|
|
|
|
genEquipTmMarkingSVlanPriColorIndex OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
|
|
::= { genEquipTmMarkingSVlanPriEntry 2 }
|
|
|
|
|
|
genEquipTmMarkingSVlanPriUserPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User Priority bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
|
|
::= { genEquipTmMarkingSVlanPriEntry 3 }
|
|
|
|
genEquipTmMarkingSVlanPriDEI OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"DEI bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
|
|
::= { genEquipTmMarkingSVlanPriEntry 4 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-global-egress-marking-802_1q-table
|
|
--
|
|
|
|
genEquipTmMarkingCVlanPriTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmMarkingCVlanPriEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
|
|
::= { genEquipTmMapping 6 }
|
|
|
|
genEquipTmMarkingCVlanPriEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmMarkingCVlanPriEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI entry."
|
|
INDEX { genEquipTmMarkingCVlanPriCosIndex,
|
|
genEquipTmMarkingCVlanPriColorIndex }
|
|
::= { genEquipTmMarkingCVlanPriTable 1 }
|
|
|
|
GenEquipTmMarkingCVlanPriEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmMarkingCVlanPriCosIndex
|
|
INTEGER,
|
|
genEquipTmMarkingCVlanPriColorIndex
|
|
GreenYellow,
|
|
genEquipTmMarkingCVlanPriUserPriority
|
|
INTEGER,
|
|
genEquipTmMarkingCVlanPriCFI
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipTmMarkingCVlanPriCosIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
|
|
::= { genEquipTmMarkingCVlanPriEntry 1 }
|
|
|
|
genEquipTmMarkingCVlanPriColorIndex OBJECT-TYPE
|
|
SYNTAX GreenYellow
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Color bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
|
|
::= { genEquipTmMarkingCVlanPriEntry 2 }
|
|
|
|
|
|
genEquipTmMarkingCVlanPriUserPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User Priority bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
|
|
::= { genEquipTmMarkingCVlanPriEntry 3 }
|
|
|
|
genEquipTmMarkingCVlanPriCFI OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CFI bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
|
|
::= { genEquipTmMarkingCVlanPriEntry 4 }
|
|
|
|
-- TM Profiles
|
|
genEquipTmProfiles OBJECT IDENTIFIER ::= {genEquipServicesTM 2}
|
|
|
|
--
|
|
-- Switch Application sw-ap-global-ingress-policer-profiles-list-table
|
|
--
|
|
|
|
genEquipProfilesPolicerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProfilesPolicerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"General Policer Profile configuration table."
|
|
::= { genEquipTmProfiles 1 }
|
|
|
|
genEquipProfilesPolicerEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProfilesPolicerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"General Policer Profile configuration table entry."
|
|
INDEX { genEquipProfilesPolicerIndex }
|
|
::= { genEquipProfilesPolicerTable 1 }
|
|
|
|
GenEquipProfilesPolicerEntry ::=
|
|
SEQUENCE {
|
|
genEquipProfilesPolicerIndex
|
|
INTEGER,
|
|
genEquipProfilesPolicerDescription
|
|
DisplayString,
|
|
genEquipProfilesPolicerPolicerType
|
|
PolicerType,
|
|
genEquipProfilesPolicerCir
|
|
INTEGER,
|
|
genEquipProfilesPolicerCbs
|
|
INTEGER,
|
|
genEquipProfilesPolicerEir
|
|
INTEGER,
|
|
genEquipProfilesPolicerEbs
|
|
INTEGER,
|
|
genEquipProfilesPolicerColorMode
|
|
PolicerColorMode,
|
|
genEquipProfilesPolicerCouplingFlagMode
|
|
EnableDisable,
|
|
genEquipProfilesPolicerDataPlaneId
|
|
INTEGER,
|
|
genEquipProfilesPolicerRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipProfilesPolicerIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User Profile ID number."
|
|
::= { genEquipProfilesPolicerEntry 1 }
|
|
|
|
genEquipProfilesPolicerDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer user Description field."
|
|
::= { genEquipProfilesPolicerEntry 2 }
|
|
|
|
|
|
genEquipProfilesPolicerPolicerType OBJECT-TYPE
|
|
SYNTAX PolicerType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Type (MEF TrTCM,RFC2697,RFC2698)."
|
|
::= { genEquipProfilesPolicerEntry 3 }
|
|
|
|
genEquipProfilesPolicerCir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Commited Information Rate (CIR)."
|
|
::= { genEquipProfilesPolicerEntry 4 }
|
|
|
|
genEquipProfilesPolicerCbs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Commited Burst Size (CBS)."
|
|
::= { genEquipProfilesPolicerEntry 5 }
|
|
|
|
genEquipProfilesPolicerEir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Excess Information Rate (EIR)."
|
|
::= { genEquipProfilesPolicerEntry 6 }
|
|
|
|
genEquipProfilesPolicerEbs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Excess Burst Size (EBS)."
|
|
::= { genEquipProfilesPolicerEntry 7 }
|
|
|
|
genEquipProfilesPolicerColorMode OBJECT-TYPE
|
|
SYNTAX PolicerColorMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Color Mode (Color Aware or Color Blind)."
|
|
::= { genEquipProfilesPolicerEntry 8 }
|
|
|
|
genEquipProfilesPolicerCouplingFlagMode OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Coupling Flag between Green and Yellow leaky buckets."
|
|
::= { genEquipProfilesPolicerEntry 9 }
|
|
|
|
genEquipProfilesPolicerDataPlaneId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4096)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The real policer ID in the dataplan 0 to 10000."
|
|
::= { genEquipProfilesPolicerEntry 10 }
|
|
|
|
genEquipProfilesPolicerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProfilesPolicerEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-profile-egress-l4-wred-green-max-drop
|
|
--
|
|
|
|
genEquipProfilesL4WredTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProfilesL4WredEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green Curve Maximal Drop Ratio (in percentage)."
|
|
::= { genEquipTmProfiles 2 }
|
|
|
|
genEquipProfilesL4WredEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProfilesL4WredEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green Curve Maximal Drop Ratio (in percentage) entry."
|
|
INDEX { genEquipProfilesL4WredIndex }
|
|
::= { genEquipProfilesL4WredTable 1 }
|
|
|
|
GenEquipProfilesL4WredEntry ::=
|
|
SEQUENCE {
|
|
genEquipProfilesL4WredIndex
|
|
INTEGER,
|
|
genEquipProfilesL4WredGreenMinThreshold
|
|
INTEGER,
|
|
genEquipProfilesL4WredGreenMaxThreshold
|
|
INTEGER,
|
|
genEquipProfilesL4WredGreenMaxDrop
|
|
INTEGER,
|
|
genEquipProfilesL4WredYellowMinThreshold
|
|
INTEGER,
|
|
genEquipProfilesL4WredYellowMaxThreshold
|
|
INTEGER,
|
|
genEquipProfilesL4WredYellowMaxDrop
|
|
INTEGER,
|
|
genEquipProfilesL4WredYellowRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipProfilesL4WredIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED Curves Profile ID."
|
|
::= { genEquipProfilesL4WredEntry 1 }
|
|
|
|
genEquipProfilesL4WredGreenMinThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8192)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green Curve Minimal occupancy (No drop until this level)."
|
|
::= { genEquipProfilesL4WredEntry 2 }
|
|
|
|
genEquipProfilesL4WredGreenMaxThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8192)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green Curve Maximal occupancy (from this point 100% will be dropped)."
|
|
::= { genEquipProfilesL4WredEntry 3 }
|
|
|
|
genEquipProfilesL4WredGreenMaxDrop OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green Curve Maximal Drop Ratio (in percentage)."
|
|
::= { genEquipProfilesL4WredEntry 4 }
|
|
|
|
genEquipProfilesL4WredYellowMinThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8192)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Yellow Curve Minimal occupancy (No drop until this level)."
|
|
::= { genEquipProfilesL4WredEntry 5 }
|
|
|
|
genEquipProfilesL4WredYellowMaxThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8192)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Yellow Curve Maximal occupancy (from this point 100% will be dropped)."
|
|
::= { genEquipProfilesL4WredEntry 6 }
|
|
|
|
genEquipProfilesL4WredYellowMaxDrop OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8192)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Yellow Curve Maximal Drop Ratio (in percentage)."
|
|
::= { genEquipProfilesL4WredEntry 7 }
|
|
|
|
genEquipProfilesL4WredYellowRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProfilesL4WredEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-global-egress-scheduler-cos-priority-profiles-list-table
|
|
--
|
|
|
|
genEquipProfilesSchedulerCoSPriTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProfilesSchedulerCoSPriEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port)."
|
|
::= { genEquipTmProfiles 3 }
|
|
|
|
genEquipProfilesSchedulerCoSPriEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProfilesSchedulerCoSPriEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port)."
|
|
INDEX { genEquipProfilesSchedulerCoSPriIndex }
|
|
::= { genEquipProfilesSchedulerCoSPriTable 1 }
|
|
|
|
GenEquipProfilesSchedulerCoSPriEntry ::=
|
|
SEQUENCE {
|
|
genEquipProfilesSchedulerCoSPriIndex
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriCos0Description
|
|
DisplayString,
|
|
genEquipProfilesSchedulerCoSPriGreenCos0Priority
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriCos1description
|
|
DisplayString,
|
|
genEquipProfilesSchedulerCoSPriGreenCos1Priority
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriCos2Description
|
|
DisplayString,
|
|
genEquipProfilesSchedulerCoSPriGreenCos2Priority
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriCos3description
|
|
DisplayString,
|
|
genEquipProfilesSchedulerCoSPriGreenCos3Priority
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriCos4description
|
|
DisplayString,
|
|
genEquipProfilesSchedulerCoSPriGreenCos4Priority
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriCos5description
|
|
DisplayString,
|
|
genEquipProfilesSchedulerCoSPriGreenCos5Priority
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriCos6description
|
|
DisplayString,
|
|
genEquipProfilesSchedulerCoSPriGreenCos6Priority
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriCos7description
|
|
DisplayString,
|
|
genEquipProfilesSchedulerCoSPriGreenCos7Priority
|
|
INTEGER,
|
|
genEquipProfilesSchedulerCoSPriRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipProfilesSchedulerCoSPriIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Profile ID."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 1 }
|
|
|
|
genEquipProfilesSchedulerCoSPriCos0Description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 0 Description."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 2 }
|
|
|
|
genEquipProfilesSchedulerCoSPriGreenCos0Priority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 0 priority."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 3 }
|
|
|
|
genEquipProfilesSchedulerCoSPriCos1description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 1 Description."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 4 }
|
|
|
|
genEquipProfilesSchedulerCoSPriGreenCos1Priority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 1 priority."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 5 }
|
|
|
|
genEquipProfilesSchedulerCoSPriCos2Description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 2 Description."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 6 }
|
|
|
|
genEquipProfilesSchedulerCoSPriGreenCos2Priority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 2 priority."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 7 }
|
|
|
|
genEquipProfilesSchedulerCoSPriCos3description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 3 Description."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 8 }
|
|
|
|
genEquipProfilesSchedulerCoSPriGreenCos3Priority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 3 priority."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 9 }
|
|
|
|
genEquipProfilesSchedulerCoSPriCos4description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 4 Description."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 10 }
|
|
|
|
genEquipProfilesSchedulerCoSPriGreenCos4Priority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 4 priority."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 11 }
|
|
|
|
genEquipProfilesSchedulerCoSPriCos5description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 5 Description."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 12 }
|
|
|
|
genEquipProfilesSchedulerCoSPriGreenCos5Priority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 5 priority."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 13 }
|
|
|
|
genEquipProfilesSchedulerCoSPriCos6description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 6 Description."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 14 }
|
|
|
|
genEquipProfilesSchedulerCoSPriGreenCos6Priority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 6 priority."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 15 }
|
|
|
|
genEquipProfilesSchedulerCoSPriCos7description OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 7 Description."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 16 }
|
|
|
|
genEquipProfilesSchedulerCoSPriGreenCos7Priority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..42)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 7 priority."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 17 }
|
|
|
|
genEquipProfilesSchedulerCoSPriRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProfilesSchedulerCoSPriEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-global-egress-scheduler-wfq-profiles-list-table
|
|
--
|
|
|
|
genEquipProfilesSchedulerWfqTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProfilesSchedulerWfqEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port)."
|
|
::= { genEquipTmProfiles 4 }
|
|
|
|
genEquipProfilesSchedulerWfqEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProfilesSchedulerWfqEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port)."
|
|
INDEX { genEquipProfilesSchedulerWfqIndex }
|
|
::= { genEquipProfilesSchedulerWfqTable 1 }
|
|
|
|
GenEquipProfilesSchedulerWfqEntry ::=
|
|
SEQUENCE {
|
|
genEquipProfilesSchedulerWfqIndex
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqCos0Weight
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqCos1Weight
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqCos2Weight
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqCos3Weight
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqCos4Weight
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqCos5Weight
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqCos6Weight
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqCos7Weight
|
|
INTEGER,
|
|
genEquipProfilesSchedulerWfqRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipProfilesSchedulerWfqIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WFQ Profile ID."
|
|
::= { genEquipProfilesSchedulerWfqEntry 1 }
|
|
|
|
genEquipProfilesSchedulerWfqCos0Weight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 0 Weight."
|
|
::= { genEquipProfilesSchedulerWfqEntry 2 }
|
|
|
|
genEquipProfilesSchedulerWfqCos1Weight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 1 Weight."
|
|
::= { genEquipProfilesSchedulerWfqEntry 3 }
|
|
|
|
genEquipProfilesSchedulerWfqCos2Weight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 2 Weight."
|
|
::= { genEquipProfilesSchedulerWfqEntry 4 }
|
|
|
|
genEquipProfilesSchedulerWfqCos3Weight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 3 Weight."
|
|
::= { genEquipProfilesSchedulerWfqEntry 5 }
|
|
|
|
genEquipProfilesSchedulerWfqCos4Weight OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 4 Weight."
|
|
::= { genEquipProfilesSchedulerWfqEntry 6 }
|
|
|
|
genEquipProfilesSchedulerWfqCos5Weight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Green CoS 2 priority."
|
|
::= { genEquipProfilesSchedulerWfqEntry 7 }
|
|
|
|
genEquipProfilesSchedulerWfqCos6Weight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 3 Description."
|
|
::= { genEquipProfilesSchedulerWfqEntry 8 }
|
|
|
|
genEquipProfilesSchedulerWfqCos7Weight OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS 7 Weight."
|
|
::= { genEquipProfilesSchedulerWfqEntry 9 }
|
|
|
|
genEquipProfilesSchedulerWfqRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProfilesSchedulerWfqEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l2-if-logical-profile-egress-shaper-table
|
|
--
|
|
|
|
genEquipProfilesL2ShaperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProfilesL2ShaperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the Egress Shaper profiles at port level."
|
|
::= { genEquipTmProfiles 5 }
|
|
|
|
genEquipProfilesL2ShaperEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProfilesL2ShaperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the Egress Shaper profiles at port level."
|
|
INDEX { genEquipProfilesL2ShaperIndex }
|
|
::= { genEquipProfilesL2ShaperTable 1 }
|
|
|
|
GenEquipProfilesL2ShaperEntry ::=
|
|
SEQUENCE {
|
|
genEquipProfilesL2ShaperIndex
|
|
INTEGER,
|
|
genEquipProfilesL2ShaperDescription
|
|
DisplayString,
|
|
genEquipProfilesL2ShaperCir
|
|
INTEGER,
|
|
genEquipProfilesL2ShaperCbs
|
|
INTEGER,
|
|
genEquipProfilesL2ShaperBurstType
|
|
BurstType,
|
|
genEquipProfilesL2ShaperRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipProfilesL2ShaperIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shaper Profile ID."
|
|
::= { genEquipProfilesL2ShaperEntry 1 }
|
|
|
|
genEquipProfilesL2ShaperDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shaper Description."
|
|
::= { genEquipProfilesL2ShaperEntry 2 }
|
|
|
|
genEquipProfilesL2ShaperCir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Committed Information Rate (in Bits)."
|
|
::= { genEquipProfilesL2ShaperEntry 3 }
|
|
|
|
genEquipProfilesL2ShaperCbs OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Committed Burst Size (in Bytes)."
|
|
::= { genEquipProfilesL2ShaperEntry 4 }
|
|
|
|
genEquipProfilesL2ShaperBurstType OBJECT-TYPE
|
|
SYNTAX BurstType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
|
|
::= { genEquipProfilesL2ShaperEntry 5 }
|
|
|
|
|
|
genEquipProfilesL2ShaperRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProfilesL2ShaperEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l3-srv-profile-egress-shaper-table
|
|
--
|
|
|
|
genEquipProfilesL3ServiceShaperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProfilesL3ServiceShaperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the Egress Shaper profiles at service level."
|
|
::= { genEquipTmProfiles 6 }
|
|
|
|
genEquipProfilesL3ServiceShaperEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProfilesL3ServiceShaperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the Egress Shaper profiles at service level."
|
|
INDEX { genEquipProfilesL3ServiceShaperIndex }
|
|
::= { genEquipProfilesL3ServiceShaperTable 1 }
|
|
|
|
GenEquipProfilesL3ServiceShaperEntry ::=
|
|
SEQUENCE {
|
|
genEquipProfilesL3ServiceShaperIndex
|
|
INTEGER,
|
|
genEquipProfilesL3ServiceShaperDescription
|
|
DisplayString,
|
|
genEquipProfilesL3ServiceShaperCir
|
|
INTEGER,
|
|
genEquipProfilesL3ServiceShaperCbs
|
|
INTEGER,
|
|
genEquipProfilesL3ServiceShaperPir
|
|
INTEGER,
|
|
genEquipProfilesL3ServiceShaperPbs
|
|
INTEGER,
|
|
genEquipProfilesL3ServiceShaperBurstType
|
|
BurstType,
|
|
genEquipProfilesL3ServiceShaperRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipProfilesL3ServiceShaperIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shaper Profile ID."
|
|
::= { genEquipProfilesL3ServiceShaperEntry 1 }
|
|
|
|
genEquipProfilesL3ServiceShaperDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shaper Description."
|
|
::= { genEquipProfilesL3ServiceShaperEntry 2 }
|
|
|
|
genEquipProfilesL3ServiceShaperCir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Committed Information Rate (in Bits)."
|
|
::= { genEquipProfilesL3ServiceShaperEntry 3 }
|
|
|
|
genEquipProfilesL3ServiceShaperCbs OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1016)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Committed Burst Size (in Bytes)."
|
|
::= { genEquipProfilesL3ServiceShaperEntry 4 }
|
|
|
|
genEquipProfilesL3ServiceShaperPir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Peak Information Rate (in Bits)."
|
|
::= { genEquipProfilesL3ServiceShaperEntry 5 }
|
|
|
|
genEquipProfilesL3ServiceShaperPbs OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1016)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Peak Burst size (in Bytes)."
|
|
::= { genEquipProfilesL3ServiceShaperEntry 6 }
|
|
|
|
genEquipProfilesL3ServiceShaperBurstType OBJECT-TYPE
|
|
SYNTAX BurstType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CBS and PBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
|
|
::= { genEquipProfilesL3ServiceShaperEntry 7 }
|
|
|
|
genEquipProfilesL3ServiceShaperRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProfilesL3ServiceShaperEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l4-srv-sp-profile-egress-queue-shaper-table
|
|
--
|
|
|
|
genEquipProfilesEgressL4QueueShaperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipProfilesEgressL4QueueShaperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the Egress Shaper profiles at Queue level."
|
|
::= { genEquipTmProfiles 7 }
|
|
|
|
genEquipProfilesEgressL4QueueShaperEntry OBJECT-TYPE
|
|
SYNTAX GenEquipProfilesEgressL4QueueShaperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the Egress Shaper profiles at Queue level."
|
|
INDEX { genEquipProfilesEgressL4QueueShaperIndex }
|
|
::= { genEquipProfilesEgressL4QueueShaperTable 1 }
|
|
|
|
GenEquipProfilesEgressL4QueueShaperEntry ::=
|
|
SEQUENCE {
|
|
genEquipProfilesEgressL4QueueShaperIndex
|
|
INTEGER,
|
|
genEquipProfilesEgressL4QueueShaperDescription
|
|
DisplayString,
|
|
genEquipProfilesEgressL4QueueShaperCir
|
|
INTEGER,
|
|
genEquipProfilesEgressL4QueueShaperCbs
|
|
INTEGER,
|
|
genEquipProfilesEgressL4QueueShaperBurstType
|
|
BurstType,
|
|
genEquipProfilesEgressL4QueueShaperRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipProfilesEgressL4QueueShaperIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shaper Profile ID."
|
|
::= { genEquipProfilesEgressL4QueueShaperEntry 1 }
|
|
|
|
genEquipProfilesEgressL4QueueShaperDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..21))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shaper Description."
|
|
::= { genEquipProfilesEgressL4QueueShaperEntry 2 }
|
|
|
|
genEquipProfilesEgressL4QueueShaperCir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Committed Information Rate (in Bits)."
|
|
::= { genEquipProfilesEgressL4QueueShaperEntry 3 }
|
|
|
|
genEquipProfilesEgressL4QueueShaperCbs OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1016)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Committed Burst Size (in Bytes)."
|
|
::= { genEquipProfilesEgressL4QueueShaperEntry 4 }
|
|
|
|
genEquipProfilesEgressL4QueueShaperBurstType OBJECT-TYPE
|
|
SYNTAX BurstType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
|
|
::= { genEquipProfilesEgressL4QueueShaperEntry 5 }
|
|
|
|
genEquipProfilesEgressL4QueueShaperRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipProfilesEgressL4QueueShaperEntry 30 }
|
|
|
|
|
|
-- TM Config
|
|
genEquipTmConfig OBJECT IDENTIFIER ::= {genEquipServicesTM 3}
|
|
|
|
--
|
|
-- Switch Application sw-ap-l4-srv-sp-egress-wred-profile-association-queue-table
|
|
--
|
|
|
|
genEquipTmL4WredAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmL4WredAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the user selelcted WRED profile for eac Egress Queue."
|
|
::= { genEquipTmConfig 1 }
|
|
|
|
genEquipTmL4WredAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmL4WredAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the user selelcted WRED profile for eac Egress Queue."
|
|
INDEX { genEquipTmL4WredAssociationIfIndex,
|
|
genEquipTmL4WredAssociationServiceIndex,
|
|
genEquipTmL4WredAssociationCosQueueIndex }
|
|
::= { genEquipTmL4WredAssociationTable 1 }
|
|
|
|
GenEquipTmL4WredAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmL4WredAssociationIfIndex
|
|
INTEGER,
|
|
genEquipTmL4WredAssociationServiceIndex
|
|
INTEGER,
|
|
genEquipTmL4WredAssociationCosQueueIndex
|
|
INTEGER,
|
|
genEquipTmL4WredAssociationWredProfileId
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipTmL4WredAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipTmL4WredAssociationEntry 1 }
|
|
|
|
genEquipTmL4WredAssociationServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Bundle ID."
|
|
::= { genEquipTmL4WredAssociationEntry 2 }
|
|
|
|
genEquipTmL4WredAssociationCosQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS Queue ID."
|
|
::= { genEquipTmL4WredAssociationEntry 3 }
|
|
|
|
genEquipTmL4WredAssociationWredProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WRED Profile ID."
|
|
::= { genEquipTmL4WredAssociationEntry 4 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l2-if-logical-egress-scheduler-cos-priority-profile-association-to-if-table
|
|
--
|
|
|
|
genEquipTmSchedulerCoSPriAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmSchedulerCoSPriAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the user selected Scheduler Priority Profile for each Egress port."
|
|
::= { genEquipTmConfig 2 }
|
|
|
|
genEquipTmSchedulerCoSPriAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmSchedulerCoSPriAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the user selected Scheduler Priority Profile for each Egress port."
|
|
INDEX { genEquipTmSchedulerCoSPriAssociationIfIndex }
|
|
::= { genEquipTmSchedulerCoSPriAssociationTable 1 }
|
|
|
|
GenEquipTmSchedulerCoSPriAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmSchedulerCoSPriAssociationIfIndex
|
|
INTEGER,
|
|
genEquipTmSchedulerCoSPriAssociationAssociatedProfileId
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipTmSchedulerCoSPriAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipTmSchedulerCoSPriAssociationEntry 1 }
|
|
|
|
genEquipTmSchedulerCoSPriAssociationAssociatedProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..9)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Queue Scheduler Profile ID."
|
|
::= { genEquipTmSchedulerCoSPriAssociationEntry 2 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l3-srv-egress-shaper-profile-association-to-service-bundle-table
|
|
--
|
|
|
|
genEquipTmL3ServiceShaperAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmL3ServiceShaperAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the user selected Shapping profiles for each Service Bundle."
|
|
::= { genEquipTmConfig 3 }
|
|
|
|
genEquipTmL3ServiceShaperAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmL3ServiceShaperAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the user selected Shapping profiles for each Service Bundle."
|
|
INDEX { genEquipTmL3ServiceShaperAssociationIfIndex,
|
|
genEquipTmL3ServiceShaperAssociationServiceClassIndex }
|
|
::= { genEquipTmL3ServiceShaperAssociationTable 1 }
|
|
|
|
GenEquipTmL3ServiceShaperAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmL3ServiceShaperAssociationIfIndex
|
|
INTEGER,
|
|
genEquipTmL3ServiceShaperAssociationServiceClassIndex
|
|
INTEGER,
|
|
genEquipTmL3ServiceShaperAssociationShaperProfileId
|
|
INTEGER,
|
|
genEquipTmL3ServiceShaperAssociationShaperAdmin
|
|
EnableDisable,
|
|
genEquipTmL3ServiceShaperAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipTmL3ServiceShaperAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipTmL3ServiceShaperAssociationEntry 1 }
|
|
|
|
genEquipTmL3ServiceShaperAssociationServiceClassIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Bundle ID."
|
|
::= { genEquipTmL3ServiceShaperAssociationEntry 2 }
|
|
|
|
genEquipTmL3ServiceShaperAssociationShaperProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shaper Profile ID."
|
|
::= { genEquipTmL3ServiceShaperAssociationEntry 3 }
|
|
|
|
genEquipTmL3ServiceShaperAssociationShaperAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Shaper Admin."
|
|
::= { genEquipTmL3ServiceShaperAssociationEntry 4 }
|
|
|
|
genEquipTmL3ServiceShaperAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipTmL3ServiceShaperAssociationEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l2-if-logical-egress-shaper-profile-association-to-if-table
|
|
--
|
|
|
|
genEquipTmL2ShaperAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmL2ShaperAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the user selected Shapping profiles for each Ethernet Port."
|
|
::= { genEquipTmConfig 4 }
|
|
|
|
genEquipTmL2ShaperAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmL2ShaperAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the user selected Shapping profiles for each Ethernet Port."
|
|
INDEX { genEquipTmL2ShaperAssociationIfIndex }
|
|
::= { genEquipTmL2ShaperAssociationTable 1 }
|
|
|
|
GenEquipTmL2ShaperAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmL2ShaperAssociationIfIndex
|
|
INTEGER,
|
|
genEquipTmL2ShaperAssociationProfileId
|
|
INTEGER,
|
|
genEquipTmL2ShaperAssociationAdmin
|
|
EnableDisable,
|
|
genEquipTmL2ShaperAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipTmL2ShaperAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipTmL2ShaperAssociationEntry 1 }
|
|
|
|
genEquipTmL2ShaperAssociationProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port Shaper Profile ID."
|
|
::= { genEquipTmL2ShaperAssociationEntry 2 }
|
|
|
|
genEquipTmL2ShaperAssociationAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port Shaper Admin."
|
|
::= { genEquipTmL2ShaperAssociationEntry 3 }
|
|
|
|
genEquipTmL2ShaperAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipTmL2ShaperAssociationEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l4-srv-sp-egress-queue-shaper-profile-association-to-queue-table
|
|
--
|
|
|
|
genEquipTmL4QueueShaperAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmL4QueueShaperAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the user selected Shapping profiles for each Ethernet PortThe table holds the user selected Shapping profiles for each transmitting Queue."
|
|
::= { genEquipTmConfig 5 }
|
|
|
|
genEquipTmL4QueueShaperAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmL4QueueShaperAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the user selected Shapping profiles for each transmitting Queue."
|
|
INDEX { genEquipTmL4QueueShaperAssociationIfIndex,
|
|
genEquipTmL4QueueShaperAssociationServiceIndex,
|
|
genEquipTmL4QueueShaperAssociationCosQueueIndex }
|
|
::= { genEquipTmL4QueueShaperAssociationTable 1 }
|
|
|
|
GenEquipTmL4QueueShaperAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmL4QueueShaperAssociationIfIndex
|
|
INTEGER,
|
|
genEquipTmL4QueueShaperAssociationServiceIndex
|
|
INTEGER,
|
|
genEquipTmL4QueueShaperAssociationCosQueueIndex
|
|
INTEGER,
|
|
genEquipTmL4QueueShaperAssociationShaperProfileId
|
|
INTEGER,
|
|
genEquipTmL4QueueShaperAssociationShaperProfileAdmin
|
|
EnableDisable,
|
|
genEquipTmL4QueueShaperAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipTmL4QueueShaperAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipTmL4QueueShaperAssociationEntry 1 }
|
|
|
|
genEquipTmL4QueueShaperAssociationServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service Bundle ID."
|
|
::= { genEquipTmL4QueueShaperAssociationEntry 2 }
|
|
|
|
genEquipTmL4QueueShaperAssociationCosQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CoS Queue ID."
|
|
::= { genEquipTmL4QueueShaperAssociationEntry 3 }
|
|
|
|
genEquipTmL4QueueShaperAssociationShaperProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Queue Shaper Profile ID."
|
|
::= { genEquipTmL4QueueShaperAssociationEntry 4 }
|
|
|
|
genEquipTmL4QueueShaperAssociationShaperProfileAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Queue Shaper Admin."
|
|
::= { genEquipTmL4QueueShaperAssociationEntry 5 }
|
|
|
|
genEquipTmL4QueueShaperAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipTmL4QueueShaperAssociationEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-l2-if-logical-egress-scheduler-cos-wfq-profile-association-to-if-table
|
|
--
|
|
|
|
genEquipTmSchedulerWfqAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipTmSchedulerWfqAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the user selected Scheduler WFQ weights Profile for each Egress port."
|
|
::= { genEquipTmConfig 6 }
|
|
|
|
genEquipTmSchedulerWfqAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipTmSchedulerWfqAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the user selected Scheduler WFQ weights Profile for each Egress port."
|
|
INDEX { genEquipTmSchedulerWfqAssociationIfIndex }
|
|
::= { genEquipTmSchedulerWfqAssociationTable 1 }
|
|
|
|
GenEquipTmSchedulerWfqAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipTmSchedulerWfqAssociationIfIndex
|
|
INTEGER,
|
|
genEquipTmSchedulerWfqAssociationProfileId
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipTmSchedulerWfqAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipTmSchedulerWfqAssociationEntry 1 }
|
|
|
|
genEquipTmSchedulerWfqAssociationProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WFQ Scheduler Profile ID"
|
|
::= { genEquipTmSchedulerWfqAssociationEntry 2 }
|
|
|
|
|
|
-- The following tables are accessed by its slot, there is no indirect access to this tables through main slot
|
|
-- Radio Clock Source
|
|
genEquipSynchronizationRadioClkSrcSource OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameters determines whether the system reference frequency is transported through the radio.
|
|
0 indicates that the outgoing signal takes its clock from an independant local clock.
|
|
channel number indicates that the clock is from that radio-channel reference clock,
|
|
as taken from the synchronization source interface."
|
|
::= { genEquipSynchronization 3 }
|
|
|
|
genEquipSynchronizationSDHClkSrcSource OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameters determines whether the system reference frequency is transported
|
|
through the interface. if value is 0 it indicates that the outgoing signal takes its
|
|
clock from an independant local clock.
|
|
system-clock-source indicates that the clock is from the system reference clock,
|
|
as taken from the synchronization source interface."
|
|
::= { genEquipSynchronization 4 }
|
|
|
|
genEquipSynchronizationPDHClkSrcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipSynchronizationPDHClkSrcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Synchronization source table."
|
|
::= { genEquipSynchronization 5 }
|
|
|
|
genEquipSynchronizationPDHClkSrcEntry OBJECT-TYPE
|
|
SYNTAX GenEquipSynchronizationPDHClkSrcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Synchronization source table."
|
|
INDEX { genEquipSynchronizationPDHClkSrcIFNum }
|
|
::= { genEquipSynchronizationPDHClkSrcTable 1 }
|
|
|
|
GenEquipSynchronizationPDHClkSrcEntry ::=
|
|
SEQUENCE {
|
|
genEquipSynchronizationPDHClkSrcIFNum
|
|
INTEGER,
|
|
genEquipSynchronizationPDHClkSrcSource
|
|
INTEGER
|
|
}
|
|
|
|
genEquipSynchronizationPDHClkSrcIFNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameters the interface which is configured to take the system reference clock
|
|
or a local clock in genEquipSynchronizationSDHClkSrcSource.
|
|
The number indicates the E1/DS1 interface being configured (1-32)."
|
|
::= { genEquipSynchronizationPDHClkSrcEntry 2 }
|
|
|
|
genEquipSynchronizationPDHClkSrcSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local-clock(0),
|
|
system-clock-source(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameters determines whether the system reference frequency is transported
|
|
through the interface defined in genEquipSynchronizationPDHClkSrcIFNum.
|
|
local-clock indicates that the outgoing signal takes its clock from an independant local clock.
|
|
system-clock-source indicates that the clock is from the system reference clock,
|
|
as taken from the synchronization source interface."
|
|
::= { genEquipSynchronizationPDHClkSrcEntry 3 }
|
|
|
|
genEquipSynchronizationPRCRegeneratorMode OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter sets the IDU to point-to-point PRC quality frequency distribution mode.
|
|
Notice that this is relevant only for smart pipe applications"
|
|
::= { genEquipSynchronization 6 }
|
|
|
|
genEquipSynchronizationPRCRegeneratorDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
line-to-radio (0),
|
|
radio-to-line (1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter sets the direction in which the frequency signal is transported,
|
|
in the case of electrical GBE interfaces.
|
|
Notice that for optical interfaces, this parameter has no effect."
|
|
::= { genEquipSynchronization 7 }
|
|
|
|
|
|
genEquipSynchronizationSrcRevertiveTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..30)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"this parameter sets the timeout (in seconds) for a counter which is set once
|
|
an interface recovers from a failure; after this timeout the interface will be considered
|
|
stable and can be used as a synchronization source. A value of zero means no timer."
|
|
::= { genEquipSynchronization 8 }
|
|
|
|
genEquipSynchronizationSrcActiveSyncSourceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The active synchronization source."
|
|
::= { genEquipSynchronization 9 }
|
|
|
|
genEquipSynchronizationNodeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic (0),
|
|
force (1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter allows forcing a certain source as the active source for the system reference clock.
|
|
When forced, the active source is specified by genEquipSynchronizationForceSource.
|
|
In automatic mode, the active source is determined by quality and priority of the relevant interfaces
|
|
(as configured in table genEquipSynchronizationSrcTable)."
|
|
::= { genEquipSynchronization 10 }
|
|
|
|
genEquipSynchronizationForceSource OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter determines which source number will be forced as active when genEquipSynchronizationNodeMode is set to force."
|
|
::= { genEquipSynchronization 11 }
|
|
|
|
genEquipSynchronizationSystemReferenceQuality OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(0),
|
|
prs(1),
|
|
g811(2),
|
|
transit-node(3),
|
|
ssu-a(4),
|
|
unknown(5),
|
|
stratum2(7),
|
|
ssu-b(8),
|
|
stratum3(10),
|
|
g813-8262(11),
|
|
smc(12),
|
|
stratum3e(13),
|
|
do-not-use (15)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter shows the current quality of the system reference clock"
|
|
::= { genEquipSynchronization 12 }
|
|
|
|
genEquipSynchronizationRegeneratorSSMAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter determines whether or not in pipe mode the system generates SSM messages"
|
|
::= { genEquipSynchronization 13 }
|
|
|
|
genEquipSynchronizationPWClkExport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local-clock(0),
|
|
system-clock-source(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter determines whether the system reference clock is exported toward the PWE3 T-Card;
|
|
This reference can be exported towards front panel using ExportClkFrontPannel or used as a common clock for
|
|
PWs using ClockSourceRef. Notice that either this or any single one of the PW T-card TDM interfaces can export the reference clock,
|
|
but not both at the same time."
|
|
::= { genEquipSynchronization 14 }
|
|
|
|
|
|
-- Synch Pipe Configurations - sync-pipe-config-table
|
|
--
|
|
genEquipSynchronizationPipeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipSynchronizationPipeEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table shows pipe interfaces."
|
|
::= { genEquipSynchronization 20 }
|
|
|
|
genEquipSynchronizationPipeEntry OBJECT-TYPE
|
|
SYNTAX GenEquipSynchronizationPipeEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry shows pipe interfaces."
|
|
INDEX { genEquipSynchronizationPipeId }
|
|
::= { genEquipSynchronizationPipeTable 1 }
|
|
|
|
GenEquipSynchronizationPipeEntry ::=
|
|
SEQUENCE {
|
|
genEquipSynchronizationPipeId
|
|
INTEGER,
|
|
genEquipSynchronizationPipeInd1
|
|
INTEGER,
|
|
genEquipSynchronizationPipeInd2
|
|
INTEGER,
|
|
genEquipSynchronizationPipeStatus
|
|
INTEGER
|
|
}
|
|
|
|
genEquipSynchronizationPipeId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Pipe ID."
|
|
::= { genEquipSynchronizationPipeEntry 1 }
|
|
|
|
|
|
genEquipSynchronizationPipeInd1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sync Interface 1."
|
|
::= { genEquipSynchronizationPipeEntry 2 }
|
|
|
|
genEquipSynchronizationPipeInd2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sync Interface 2."
|
|
::= { genEquipSynchronizationPipeEntry 3 }
|
|
|
|
genEquipSynchronizationPipeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sync Pipe Status."
|
|
::= { genEquipSynchronizationPipeEntry 4 }
|
|
|
|
-- PTP (Precision Time Protocol)
|
|
genEquipSynchronizationPTP OBJECT IDENTIFIER ::= {genEquipSynchronization 21}
|
|
|
|
genEquipSynchronizationPTPTcAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Transparent Clock (TC) administrative state."
|
|
::= { genEquipSynchronizationPTP 1 }
|
|
|
|
|
|
-- TC configuartion - ptp-tc-config-table
|
|
--
|
|
genEquipSynchronizationPTPTcConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipSynchronizationPTPTcConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PTP (Precision Time Protocol) TC (Transparent Clock) configuration table."
|
|
::= { genEquipSynchronizationPTP 10 }
|
|
|
|
genEquipSynchronizationPTPTcConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipSynchronizationPTPTcConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PTP (Precision Time Protocol) TC (Transparent Clock) configuration table entry."
|
|
INDEX { genEquipSynchronizationPTPTcConfigId }
|
|
::= { genEquipSynchronizationPTPTcConfigTable 1 }
|
|
|
|
GenEquipSynchronizationPTPTcConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipSynchronizationPTPTcConfigId
|
|
INTEGER,
|
|
genEquipSynchronizationPTPTcConfigMaster
|
|
INTEGER
|
|
}
|
|
|
|
genEquipSynchronizationPTPTcConfigId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface on which TC function is required."
|
|
::= { genEquipSynchronizationPTPTcConfigEntry 1 }
|
|
|
|
genEquipSynchronizationPTPTcConfigMaster OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
upstream(0),
|
|
downstream(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Points whether the interface's direction is upstream or downstream."
|
|
::= { genEquipSynchronizationPTPTcConfigEntry 2 }
|
|
|
|
|
|
-- TC Status - ptp-tc-status-table
|
|
--
|
|
genEquipSynchronizationPTPTcStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipSynchronizationPTPTcStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PTP (Precision Time Protocol) TC (Transparent Clock) status table."
|
|
::= { genEquipSynchronizationPTP 11 }
|
|
|
|
genEquipSynchronizationPTPTcStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipSynchronizationPTPTcStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PTP (Precision Time Protocol) TC (Transparent Clock) status table entry."
|
|
INDEX { genEquipSynchronizationPTPTcStatusId }
|
|
::= { genEquipSynchronizationPTPTcStatusTable 1 }
|
|
|
|
GenEquipSynchronizationPTPTcStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipSynchronizationPTPTcStatusId
|
|
INTEGER,
|
|
genEquipSynchronizationPTPTcStatusState
|
|
INTEGER,
|
|
genEquipSynchronizationPTPTcStatusFreqLock
|
|
DownUp
|
|
}
|
|
|
|
genEquipSynchronizationPTPTcStatusId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface on which TC status is required."
|
|
::= { genEquipSynchronizationPTPTcStatusEntry 1 }
|
|
|
|
|
|
genEquipSynchronizationPTPTcStatusState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(0),
|
|
init(1),
|
|
calibrating(2),
|
|
up(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of the TC function that may be: Down, Init, Calibrating or Up."
|
|
::= { genEquipSynchronizationPTPTcStatusEntry 2 }
|
|
|
|
genEquipSynchronizationPTPTcStatusFreqLock OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lock status, Up or Down, of the network synchronization frequency that passes through the interface."
|
|
::= { genEquipSynchronizationPTPTcStatusEntry 3 }
|
|
|
|
|
|
-- Interfaces
|
|
genEquipInterfaces OBJECT IDENTIFIER ::= {genEquip 9}
|
|
|
|
-- Interfaces - Ethernet
|
|
genEquipInterfacesEther OBJECT IDENTIFIER ::= {genEquipInterfaces 1}
|
|
|
|
genEquipInterfacesEtherTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesEtherEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet interface configuration and status table.
|
|
The index of the table is via ifIndex, as well as the operational status and the admin state,
|
|
speed and port connector."
|
|
::= { genEquipInterfacesEther 1 }
|
|
|
|
genEquipInterfacesEtherEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesEtherEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet interface configuration and status table.
|
|
The index of the table is via ifIndex, as well as the operational status and the admin state,
|
|
speed and port connector."
|
|
INDEX { ifIndex }
|
|
::= { genEquipInterfacesEtherTable 1 }
|
|
|
|
GenEquipInterfacesEtherEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesEtherConnType
|
|
INTEGER,
|
|
genEquipInterfacesEtherPortType
|
|
INTEGER,
|
|
genEquipInterfacesEtherAutoNegotiation
|
|
INTEGER,
|
|
genEquipInterfacesEtherDuplex
|
|
HalfFull,
|
|
genEquipInterfacesEtherRate
|
|
RateMbps,
|
|
genEquipInterfacesEtherPortLerningAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesEtherFlowCtrl
|
|
INTEGER,
|
|
genEquipInterfacesEtherLagPortMember
|
|
INTEGER,
|
|
genEquipInterfacesEtherActualDuplex
|
|
HalfFull,
|
|
genEquipInterfacesEtherActualRate
|
|
RateMbps,
|
|
genEquipInterfacesEtherClkSrc
|
|
INTEGER,
|
|
genEquipInterfacesEtherPortServiceType
|
|
INTEGER,
|
|
genEquipInterfacesEtheMACAddress
|
|
MacAddress,
|
|
genEquipInterfacesEtherDefaultVLANId
|
|
INTEGER,
|
|
genEquipInterfacesEtherPortBlockSharedVlans
|
|
EnableDisable
|
|
}
|
|
|
|
genEquipInterfacesEtherConnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
rj45(0),
|
|
electricalSFP(1),
|
|
opticalSFP(2),
|
|
radio(3),
|
|
sfp100base-fx(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The physical interface type. For port 8 the only valid value is radio. For ports 3 to 7 the only valid
|
|
value is rj45."
|
|
::= { genEquipInterfacesEtherEntry 1 }
|
|
|
|
|
|
genEquipInterfacesEtherPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
access(0),
|
|
trunk(1),
|
|
hybrid(2),
|
|
cN(3),
|
|
pN(4),
|
|
management(30),
|
|
wayside(31)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of the port.
|
|
Access - untagged port (in case of managed switch).
|
|
Trunk - C-VID tagged port (in case of managed switch).
|
|
CN - Don't care on the vlan tag (in case of metro switch configuration).
|
|
SN - S-VID is used as the first vlan (in case of metro switch configuration)."
|
|
::= { genEquipInterfacesEtherEntry 2 }
|
|
|
|
genEquipInterfacesEtherAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
off(0),
|
|
on(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable auto-negotiation on the port."
|
|
::= { genEquipInterfacesEtherEntry 3 }
|
|
|
|
genEquipInterfacesEtherDuplex OBJECT-TYPE
|
|
SYNTAX HalfFull
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Half or full duplex."
|
|
::= { genEquipInterfacesEtherEntry 4 }
|
|
|
|
genEquipInterfacesEtherRate OBJECT-TYPE
|
|
SYNTAX RateMbps
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"10, 100 OR 1000 Mbps."
|
|
::= { genEquipInterfacesEtherEntry 5 }
|
|
|
|
genEquipInterfacesEtherPortLerningAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable MAC address learning in the port."
|
|
::= { genEquipInterfacesEtherEntry 6 }
|
|
|
|
genEquipInterfacesEtherFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
off(0),
|
|
on(1),
|
|
na(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable flow control on the port. Supported only in pipe mode. "
|
|
::= { genEquipInterfacesEtherEntry 7 }
|
|
|
|
genEquipInterfacesEtherLagPortMember OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
not-aggrigated(0),
|
|
group-1(1),
|
|
group-2(2),
|
|
group-3(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The syntax is ifIndex, or FFFF for port that is not member in a lag."
|
|
::= { genEquipInterfacesEtherEntry 8 }
|
|
|
|
genEquipInterfacesEtherActualDuplex OBJECT-TYPE
|
|
SYNTAX HalfFull
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Actual duplex (in auto-negotiation, the mode the two ports agreed upon) - Half or full duplex."
|
|
::= { genEquipInterfacesEtherEntry 9 }
|
|
|
|
genEquipInterfacesEtherActualRate OBJECT-TYPE
|
|
SYNTAX RateMbps
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Actual rate (in auto-negotiation, the rate the two ports agreed upon) - 10, 100 OR 1000 Mbps."
|
|
::= { genEquipInterfacesEtherEntry 10 }
|
|
|
|
genEquipInterfacesEtherClkSrc OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
local-clock(0),
|
|
system-clock-source(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source for the outgoing carrier signal clock. Local-clock is an internal independent oscilator.
|
|
system-clock-source causes the ethernet clock to be derived from the defined system clock source
|
|
(which can be taken from another interface)
|
|
Note: changing this parameter per port affect all the Ethernet ports."
|
|
::= { genEquipInterfacesEtherEntry 11 }
|
|
|
|
genEquipInterfacesEtherPortServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
sap(0),
|
|
snp(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter indicates whether the port is being used as a Service Access Point (SAP)
|
|
or as a Service Network Point (SNP) in a network-wide Ethernet service;
|
|
the parameter has no functionality, but is meant to hold data for the NMS."
|
|
::= { genEquipInterfacesEtherEntry 12 }
|
|
|
|
genEquipInterfacesEtheMACAddress
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address of the port for CFM or PWE3 addressing purposes."
|
|
::= { genEquipInterfacesEtherEntry 13 }
|
|
|
|
genEquipInterfacesEtherDefaultVLANId
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4090)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Default VLAN ID of the Ethernet interface."
|
|
::= { genEquipInterfacesEtherEntry 14 }
|
|
|
|
genEquipInterfacesEtherPortBlockSharedVlans
|
|
OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When enabled, this parameter blocks transfer of Ethernet frames to/from other ports
|
|
for which it is enabled, effectively eliminating all shared VLANs."
|
|
::= { genEquipInterfacesEtherEntry 15 }
|
|
|
|
|
|
---------------
|
|
genEquipInterfacesEtherStatePropagation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0) ,
|
|
lof-loc(1) ,
|
|
lof-loc-excber(3) ,
|
|
lof-loc-remote(5) ,
|
|
lof-loc-excber-remote(7) ,
|
|
lof(9) ,
|
|
lof-excber(11) ,
|
|
lof-remote(13) ,
|
|
lof-excber-remote(15)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter configures the behavior of Ethernet ports in single
|
|
pipe mode. When a failure is detected, ports will be automatically shut
|
|
down when the configured conditions take place. The possible choices
|
|
are a combination of the following failures in the local and the remote IDUs:
|
|
radio LOF, Ethernet line LOC, radio excessive ber"
|
|
::= { genEquipInterfacesEther 2 }
|
|
|
|
genEquipInterfacesEtherPWPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port in the traffic bridge connected to the PWE3 T-card."
|
|
::= { genEquipInterfacesEther 3 }
|
|
|
|
|
|
-- Interfaces E1/T1
|
|
genEquipInterfacesE1T1 OBJECT IDENTIFIER ::= {genEquipInterfaces 2}
|
|
|
|
genEquipInterfacesE1T1PortGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesE1T1PortGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"General parameters for group of E1 or T1 interfaces."
|
|
::= { genEquipInterfacesE1T1 1 }
|
|
|
|
genEquipInterfacesE1T1PortGroupEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesE1T1PortGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"General parameters for group of E1 or T1 interfaces."
|
|
INDEX { genEquipInterfacesE1T1PortGroupId }
|
|
::= { genEquipInterfacesE1T1PortGroupTable 1 }
|
|
|
|
GenEquipInterfacesE1T1PortGroupEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesE1T1PortGroupId
|
|
INTEGER,
|
|
genEquipInterfacesE1T1PortGroupLineCode
|
|
INTEGER,
|
|
genEquipInterfacesE1T1PortGroupExcessiveBERthreshold
|
|
BerLevel,
|
|
genEquipInterfacesE1T1PortGroupSignalDegradeThreshold
|
|
INTEGER,
|
|
genEquipInterfacesE1T1PortGroupLineCode1to8
|
|
INTEGER,
|
|
genEquipInterfacesE1T1PortGroupLineCode9to16
|
|
INTEGER,
|
|
genEquipInterfacesE1T1PortGroupLineCode17to24
|
|
INTEGER,
|
|
genEquipInterfacesE1T1PortGroupLineCode25to32
|
|
INTEGER
|
|
}
|
|
|
|
genEquipInterfacesE1T1PortGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Group id. the index of this table."
|
|
::= { genEquipInterfacesE1T1PortGroupEntry 1 }
|
|
|
|
genEquipInterfacesE1T1PortGroupLineCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b8zs(1),
|
|
ami(2),
|
|
hdb3(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PDH line coding. b8zs is for T1 and hdb3 for E1.
|
|
ami is only for T1. This parameter is
|
|
relevant only for versions up to 6.6.0.0.1.53 (including)."
|
|
::= { genEquipInterfacesE1T1PortGroupEntry 2 }
|
|
|
|
genEquipInterfacesE1T1PortGroupExcessiveBERthreshold OBJECT-TYPE
|
|
SYNTAX BerLevel
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Excessive BER threshold for the group of E1s/T1s."
|
|
::= { genEquipInterfacesE1T1PortGroupEntry 3 }
|
|
|
|
genEquipInterfacesE1T1PortGroupSignalDegradeThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER { n1e-6(3), n1e-7(4), n1e-8(5), n1e-9(6) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Signal degrade threshold for the group of E1s/T1s."
|
|
::= { genEquipInterfacesE1T1PortGroupEntry 4 }
|
|
|
|
genEquipInterfacesE1T1PortGroupLineCode1to8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b8zs(1),
|
|
ami(2),
|
|
hdb3(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PDH line coding for line interfaces 1 to 8.
|
|
b8zs is for T1 and hdb3 for E1. ami is only for T1."
|
|
::= { genEquipInterfacesE1T1PortGroupEntry 5 }
|
|
|
|
genEquipInterfacesE1T1PortGroupLineCode9to16 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b8zs(1),
|
|
ami(2),
|
|
hdb3(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PDH line coding for line interfaces 9 to 16.
|
|
b8zs is for T1 and hdb3 for E1. ami is only for T1."
|
|
::= { genEquipInterfacesE1T1PortGroupEntry 6 }
|
|
|
|
genEquipInterfacesE1T1PortGroupLineCode17to24 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b8zs(1),
|
|
ami(2),
|
|
hdb3(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PDH line coding for line interfaces 17 to 24.
|
|
b8zs is for T1 and hdb3 for E1. ami is only for T1."
|
|
::= { genEquipInterfacesE1T1PortGroupEntry 7 }
|
|
|
|
genEquipInterfacesE1T1PortGroupLineCode25to32 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b8zs(1),
|
|
ami(2),
|
|
hdb3(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PDH line coding for interfaces 25 to 32.
|
|
b8zs is for T1 and hdb3 for E1. ami is only for T1."
|
|
::= { genEquipInterfacesE1T1PortGroupEntry 8 }
|
|
|
|
|
|
|
|
genEquipInterfacesE1T1Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesE1T1Entry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"E1/T1 interface configuration table."
|
|
::= { genEquipInterfacesE1T1 2 }
|
|
|
|
genEquipInterfacesE1T1Entry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesE1T1Entry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"E1/T1 interface configuration table."
|
|
INDEX { ifIndex }
|
|
::= { genEquipInterfacesE1T1Table 1 }
|
|
|
|
GenEquipInterfacesE1T1Entry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesE1T1Priority
|
|
INTEGER,
|
|
genEquipInterfacesE1T1CurrBER
|
|
BerLevel,
|
|
genEquipInterfacesE1T1Loopback
|
|
INTEGER,
|
|
genEquipInterfacesE1T1AISSStatus
|
|
INTEGER,
|
|
genEquipInterfacesE1T1CableLength
|
|
INTEGER
|
|
}
|
|
|
|
genEquipInterfacesE1T1Priority OBJECT-TYPE
|
|
SYNTAX INTEGER { low(1), high(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ACM priority of the E1/T1.
|
|
This parameter is relevant only for stand-alone mode.
|
|
In shelf this parameter is defined in the trail configuration."
|
|
::= { genEquipInterfacesE1T1Entry 1 }
|
|
|
|
genEquipInterfacesE1T1CurrBER OBJECT-TYPE
|
|
SYNTAX BerLevel
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"E1/T1 current BER."
|
|
::= { genEquipInterfacesE1T1Entry 2 }
|
|
|
|
genEquipInterfacesE1T1Loopback OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
towardsLine(2),
|
|
towardsRadio(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or Disable line loopback on the E1/T1 interface."
|
|
::= { genEquipInterfacesE1T1Entry 3 }
|
|
|
|
genEquipInterfacesE1T1AISSStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
detected(0),
|
|
notDetected(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Status of the AIS detection, if the AIS detection is activated."
|
|
::= { genEquipInterfacesE1T1Entry 4 }
|
|
|
|
genEquipInterfacesE1T1CableLength OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
len-0-133ft-0-41m(1),
|
|
len-133ft-266ft-41m-81m(2),
|
|
len-266ft-399ft-81m-122m(3),
|
|
len-399ft-533ft-122m-162m(4),
|
|
len-533ft-655ft-162m-200m(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter is valid only for T1 interfaces, and determines cable length range."
|
|
::= { genEquipInterfacesE1T1Entry 5 }
|
|
|
|
|
|
|
|
genEquipInterfacesAux OBJECT IDENTIFIER ::= {genEquipInterfaces 3}
|
|
|
|
-- Interfaces Way Side
|
|
genEquipInterfacesAuxWaySide OBJECT IDENTIFIER ::= {genEquipInterfacesAux 1}
|
|
|
|
genEquipInterfacesAuxWaySideTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesAuxWaySideEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Way-side interface configuration."
|
|
::= { genEquipInterfacesAuxWaySide 1 }
|
|
|
|
genEquipInterfacesAuxWaySideEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesAuxWaySideEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Way-side interface configuration."
|
|
INDEX { ifIndex }
|
|
::= { genEquipInterfacesAuxWaySideTable 1 }
|
|
|
|
GenEquipInterfacesAuxWaySideEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesAuxWaySideAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesAuxWaySideCapacity
|
|
INTEGER,
|
|
genEquipInterfacesAuxWaySideAutoNegotiation
|
|
OffOn,
|
|
genEquipInterfacesAuxWaySideDuplex
|
|
INTEGER,
|
|
genEquipInterfacesAuxWaySideRate
|
|
RateMbps
|
|
}
|
|
|
|
genEquipInterfacesAuxWaySideAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable - Set Ethernet port #4 to be a wayside port. Disabling this option will cause the port to behave
|
|
as a normal traffic Ethernet port."
|
|
::= { genEquipInterfacesAuxWaySideEntry 1 }
|
|
|
|
|
|
genEquipInterfacesAuxWaySideCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER { narrow(0), wide(1) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Narrow band (64Kbps) or Wide band (2Mbps)"
|
|
::= { genEquipInterfacesAuxWaySideEntry 2 }
|
|
|
|
|
|
genEquipInterfacesAuxWaySideAutoNegotiation OBJECT-TYPE
|
|
SYNTAX OffOn
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wayside port auto negotiation (Off, on)"
|
|
::= { genEquipInterfacesAuxWaySideEntry 3 }
|
|
|
|
genEquipInterfacesAuxWaySideDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
half(0),
|
|
full(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wayside port duplex (Half, Full)"
|
|
::= { genEquipInterfacesAuxWaySideEntry 4 }
|
|
|
|
genEquipInterfacesAuxWaySideRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(-1),
|
|
n10(0),
|
|
n100(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Wayside interface port rate (10Mbps,100Mbps)"
|
|
::= { genEquipInterfacesAuxWaySideEntry 5 }
|
|
|
|
|
|
|
|
|
|
-- Interfaces User channel
|
|
genEquipInterfacesAuxUserChanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesAuxUserChanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of configured user channels."
|
|
::= { genEquipInterfacesAux 2 }
|
|
|
|
genEquipInterfacesAuxUserChanEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesAuxUserChanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of configured user channels."
|
|
INDEX { ifIndex }
|
|
::= { genEquipInterfacesAuxUserChanTable 1 }
|
|
|
|
GenEquipInterfacesAuxUserChanEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesAuxUserChanType
|
|
INTEGER
|
|
}
|
|
|
|
genEquipInterfacesAuxUserChanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
asynchronous-rs232(1),
|
|
asynchronous-v-11(2),
|
|
twin-asynchronous-rs232-and-v-11(3),
|
|
synchronous-v-11-codirectional(4),
|
|
synchronous-v-11-contradirectional(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"User channel type. The asynchronous modes allow two channels, one in each port.
|
|
The twin asynchronous mode uses port 1 for v.11 and port 2 for RS-232.
|
|
The Synchronous modes use two ports each"
|
|
::= { genEquipInterfacesAuxUserChanEntry 1 }
|
|
|
|
|
|
-- Interfaces Sonet/SDH
|
|
genEquipInterfacesSdh OBJECT IDENTIFIER ::= {genEquipInterfaces 4}
|
|
|
|
genEquipInterfacesSdhTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesSdhEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"STM-1,OC-3 interface configuration and status table. "
|
|
::= { genEquipInterfacesSdh 1 }
|
|
|
|
genEquipInterfacesSdhEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesSdhEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"STM-1,OC-3 interface configuration and status table."
|
|
INDEX { ifIndex }
|
|
::= { genEquipInterfacesSdhTable 1 }
|
|
|
|
GenEquipInterfacesSdhEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesSdhMuteTx
|
|
EnableDisableSMI2,
|
|
genEquipInterfacesSdhClockSource
|
|
INTEGER,
|
|
genEquipInterfacesSdhAISAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesSdhTraceIdReceived
|
|
DisplayString,
|
|
genEquipInterfacesSdhTraceIdTransmitted
|
|
DisplayString,
|
|
genEquipInterfacesSdhTraceIdExpected
|
|
DisplayString,
|
|
genEquipInterfacesSdhTraceIdStringLength
|
|
INTEGER,
|
|
genEquipInterfacesSdhExcessiveBer
|
|
INTEGER,
|
|
genEquipInterfacesSdhSignalDegrade
|
|
INTEGER,
|
|
genEquipInterfacesSdhLoopback
|
|
INTEGER,
|
|
genEquipInterfacesSdhClockSourceStatus
|
|
INTEGER,
|
|
genEquipInterfacesSdhLineTxProtectionMode
|
|
INTEGER,
|
|
genEquipInterfacesSdhSyncVC
|
|
INTEGER,
|
|
genEquipInterfacesSdhAdmin
|
|
EnableDisableSMI2,
|
|
genEquipInterfacesSdhPdhTimingMode
|
|
PWPDHClockSource,
|
|
genEquipInterfacesSdhSlot
|
|
INTEGER,
|
|
genEquipInterfacesSdhIdleCode
|
|
INTEGER,
|
|
genEquipInterfacesSdhSSMAdmin
|
|
EnableDisableSMI2,
|
|
genEquipInterfacesSdhSSMPattern
|
|
INTEGER,
|
|
genEquipInterfacesSdhTraceIdAdmin
|
|
EnableDisableSMI2,
|
|
genEquipInterfacesSdhVCSignalLabel
|
|
INTEGER,
|
|
genEquipInterfacesSdhVcRdiAdmin
|
|
EnableDisableSMI2
|
|
}
|
|
|
|
genEquipInterfacesSdhMuteTx OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mute Tx option on the interface."
|
|
::= { genEquipInterfacesSdhEntry 1 }
|
|
|
|
genEquipInterfacesSdhClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal-clock(0),
|
|
loop(1),
|
|
synchronization-vc(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source of the clock being used.
|
|
sync-vc option is for future support, to use one of the outgoing TDM VCs as a source."
|
|
::= { genEquipInterfacesSdhEntry 2 }
|
|
|
|
genEquipInterfacesSdhAISAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable, Disable AIS signaling at the V5 byte on the STM-1, OC-3 interface."
|
|
::= { genEquipInterfacesSdhEntry 3 }
|
|
|
|
genEquipInterfacesSdhTraceIdReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"J0 Trace Identifier signal that was received on the interface."
|
|
::= { genEquipInterfacesSdhEntry 4 }
|
|
|
|
genEquipInterfacesSdhTraceIdTransmitted OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"J0 Trace Identifier signal that is transmitted on the interface."
|
|
::= { genEquipInterfacesSdhEntry 5 }
|
|
|
|
genEquipInterfacesSdhTraceIdExpected OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"J0 Trace Identifier signal that is expected to be received on the interface."
|
|
::= { genEquipInterfacesSdhEntry 6 }
|
|
|
|
genEquipInterfacesSdhTraceIdStringLength OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
len1(0),
|
|
len15(1),
|
|
len62(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trace identifier string length. Lengths 0 and 15 are valid for SDH systems. Length 62 is additionally available in SONET systems."
|
|
::= { genEquipInterfacesSdhEntry 7 }
|
|
|
|
genEquipInterfacesSdhExcessiveBer OBJECT-TYPE
|
|
SYNTAX INTEGER { n1e-3(0), n1e-4(1), n1e-5(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Excessive BER threshold on the interface."
|
|
::= { genEquipInterfacesSdhEntry 8 }
|
|
|
|
genEquipInterfacesSdhSignalDegrade OBJECT-TYPE
|
|
SYNTAX INTEGER { n1e-6(3), n1e-7(4), n1e-8(5), n1e-9(6) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Signal degrade threshold on the interface."
|
|
::= { genEquipInterfacesSdhEntry 9 }
|
|
|
|
genEquipInterfacesSdhLoopback OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
loopback-towards-system(1),
|
|
loopback-towards-line(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SDH Loopback."
|
|
::= { genEquipInterfacesSdhEntry 10 }
|
|
|
|
genEquipInterfacesSdhClockSourceStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal-clock(0),
|
|
loop(1),
|
|
synchronization-vc(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The actual source of the clock for the outgoing STM-1/OC-3 signal.
|
|
It may differ from the desired source if the source signal is missing or corrupt"
|
|
::= { genEquipInterfacesSdhEntry 11 }
|
|
|
|
genEquipInterfacesSdhLineTxProtectionMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
uni-directional-MSP(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"this parameter configures the behavior of the transmitting line in a 1+1 HSB configuration.
|
|
In normal mode the stand-by signal is silenced. In uni-directional MSP both units will transmit"
|
|
::= { genEquipInterfacesSdhEntry 12 }
|
|
|
|
genEquipInterfacesSdhSyncVC OBJECT-TYPE
|
|
SYNTAX INTEGER (1..63)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The outgoing VC signal to be taken as the STM-1/OC-3 synchronization source if
|
|
genEquipInterfacesSdhClockSource is set to synchronization-vc"
|
|
::= { genEquipInterfacesSdhEntry 13 }
|
|
|
|
genEquipInterfacesSdhAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Administrative status of the STM-1/OC3 port"
|
|
::= { genEquipInterfacesSdhEntry 14 }
|
|
|
|
genEquipInterfacesSdhPdhTimingMode OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock reference for outgoing PDH signals configured in 'absolute clock' mode"
|
|
::= { genEquipInterfacesSdhEntry 15 }
|
|
|
|
genEquipInterfacesSdhSlot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot ID"
|
|
::= { genEquipInterfacesSdhEntry 16 }
|
|
|
|
genEquipInterfacesSdhIdleCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value to be transmitted at PDH signals inside the STM-1/OC3 when there is no data to transmit"
|
|
::= { genEquipInterfacesSdhEntry 17 }
|
|
|
|
genEquipInterfacesSdhSSMAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SSM support admin for this interface"
|
|
::= { genEquipInterfacesSdhEntry 18 }
|
|
|
|
genEquipInterfacesSdhSSMPattern OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the default SSM pattern to be transmitted in case if TCC clock synchronization subsystem doesn't provide SSM pattern value"
|
|
::= { genEquipInterfacesSdhEntry 19 }
|
|
|
|
genEquipInterfacesSdhTraceIdAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/disable of J0 mismatch checking on RX direction"
|
|
::= { genEquipInterfacesSdhEntry 20 }
|
|
|
|
genEquipInterfacesSdhVCSignalLabel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
asynchronous(0),
|
|
non-specific-payload(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the signal label bits to be sent and expected in every VC-11/12;
|
|
use non-specific payload only for backwards compatibility with old equipment"
|
|
::= { genEquipInterfacesSdhEntry 21 }
|
|
|
|
genEquipInterfacesSdhVcRdiAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VC-RDI signaling admin status"
|
|
::= { genEquipInterfacesSdhEntry 22 }
|
|
|
|
|
|
-- LPVC (Low Oreder Path VC)
|
|
genEquipInterfacesSdhLpVcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesSdhLpVcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. "
|
|
::= { genEquipInterfacesSdh 2 }
|
|
|
|
genEquipInterfacesSdhLpVcEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesSdhLpVcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. "
|
|
INDEX { ifIndex, genEquipInterfacesSdhLpVcId }
|
|
::= { genEquipInterfacesSdhLpVcTable 1 }
|
|
|
|
GenEquipInterfacesSdhLpVcEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesSdhLpVcId
|
|
INTEGER,
|
|
genEquipInterfacesSdhLpVcAIS
|
|
INTEGER
|
|
}
|
|
|
|
genEquipInterfacesSdhLpVcId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..84)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"VC-11 or VC-12 number; VCs are numbered according to standard KLM order. "
|
|
::= { genEquipInterfacesSdhLpVcEntry 1 }
|
|
|
|
genEquipInterfacesSdhLpVcAIS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aisDetected(0),
|
|
aisNotDetected(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether incoming AIS is currently detected in the VC's payload. 0 indicates that AIS is detected, 1 that is not detected."
|
|
::= { genEquipInterfacesSdhLpVcEntry 2 }
|
|
|
|
|
|
-- TDM pw-stm1oc3-status-table
|
|
genEquipInterfacesSdhStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesSdhStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SDH Status. "
|
|
::= { genEquipInterfacesSdh 3 }
|
|
|
|
genEquipInterfacesSdhStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesSdhStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SDH Status"
|
|
INDEX { genEquipInterfacesSdhStatusIfIndex }
|
|
::= { genEquipInterfacesSdhStatusTable 1 }
|
|
|
|
GenEquipInterfacesSdhStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesSdhStatusIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesSdhStatusLine
|
|
INTEGER,
|
|
genEquipInterfacesSdhStatusOperState
|
|
DownUp,
|
|
genEquipInterfacesSdhStatusRegenerator
|
|
INTEGER,
|
|
genEquipInterfacesSdhStatusClockSourceStatus
|
|
PWPDHClockSource,
|
|
genEquipInterfacesSdhStatusPdhClockStatus
|
|
PWPDHClockSource,
|
|
genEquipInterfacesSdhStatusSlotId
|
|
INTEGER,
|
|
genEquipInterfacesSdhStatusLoopback
|
|
INTEGER,
|
|
genEquipInterfacesSdhStatusMultiplexer
|
|
INTEGER,
|
|
genEquipInterfacesSdhStatusSsmRx
|
|
INTEGER,
|
|
genEquipInterfacesSdhStatusSsmTx
|
|
INTEGER
|
|
}
|
|
|
|
genEquipInterfacesSdhStatusIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Portnumber"
|
|
::= { genEquipInterfacesSdhStatusEntry 1 }
|
|
|
|
|
|
genEquipInterfacesSdhStatusLine OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4)"
|
|
::= { genEquipInterfacesSdhStatusEntry 2 }
|
|
|
|
genEquipInterfacesSdhStatusOperState OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Interface operational status"
|
|
::= { genEquipInterfacesSdhStatusEntry 3 }
|
|
|
|
genEquipInterfacesSdhStatusRegenerator OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4)"
|
|
::= { genEquipInterfacesSdhStatusEntry 4 }
|
|
|
|
genEquipInterfacesSdhStatusClockSourceStatus OBJECT-TYPE
|
|
SYNTAX PWPDHClockSource
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The actual source of the clock for the outgoing STM-1/OC-3 signal.
|
|
It may differ from the desired source if the source signal is missing or corrupt"
|
|
::= { genEquipInterfacesSdhStatusEntry 5 }
|
|
|
|
genEquipInterfacesSdhStatusPdhClockStatus OBJECT-TYPE
|
|
SYNTAX PWPDHClockSource
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PDH clock source status"
|
|
::= { genEquipInterfacesSdhStatusEntry 6 }
|
|
|
|
genEquipInterfacesSdhStatusSlotId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot ID"
|
|
::= { genEquipInterfacesSdhStatusEntry 7 }
|
|
|
|
genEquipInterfacesSdhStatusLoopback OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
towards-system(1),
|
|
towards-line(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current state of the loopback for the SONET/SDH interface"
|
|
::= { genEquipInterfacesSdhStatusEntry 8 }
|
|
|
|
genEquipInterfacesSdhStatusMultiplexer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bitmask: no-defect (1), STS-LOP(2), STS-AIS(4), STS-RDI(8), unequipped (16), label-mismatch (32)"
|
|
::= { genEquipInterfacesSdhStatusEntry 9 }
|
|
|
|
genEquipInterfacesSdhStatusSsmRx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the currently received SSM bits "
|
|
::= { genEquipInterfacesSdhStatusEntry 10 }
|
|
|
|
genEquipInterfacesSdhStatusSsmTx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the currently transmitted SSM bits "
|
|
::= { genEquipInterfacesSdhStatusEntry 11 }
|
|
|
|
|
|
--
|
|
-- TDM pw-stm1oc3-loopback-status-table
|
|
|
|
genEquipInterfacesSdhLoopbackStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesSdhLoopbackStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SONET/SDH interface loopback status"
|
|
::= { genEquipInterfacesSdh 4 }
|
|
|
|
genEquipInterfacesSdhLoopbackStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesSdhLoopbackStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SONET/SDH interface loopback status entry"
|
|
INDEX { genEquipInterfacesSdhLoopbackStatusIfIndex }
|
|
::= { genEquipInterfacesSdhLoopbackStatusTable 1 }
|
|
|
|
GenEquipInterfacesSdhLoopbackStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesSdhLoopbackStatusIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesSdhLoopbackStatusSlotId
|
|
INTEGER,
|
|
genEquipInterfacesSdhLoopbackStatusType
|
|
INTEGER,
|
|
genEquipInterfacesSdhLoopbackStatusCounter
|
|
INTEGER
|
|
}
|
|
|
|
genEquipInterfacesSdhLoopbackStatusIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Portnumber"
|
|
::= { genEquipInterfacesSdhLoopbackStatusEntry 1 }
|
|
|
|
|
|
genEquipInterfacesSdhLoopbackStatusSlotId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot ID"
|
|
::= { genEquipInterfacesSdhLoopbackStatusEntry 2 }
|
|
|
|
genEquipInterfacesSdhLoopbackStatusType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
towards-system(1),
|
|
towards-line(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Interface operational status"
|
|
::= { genEquipInterfacesSdhLoopbackStatusEntry 3 }
|
|
|
|
genEquipInterfacesSdhLoopbackStatusCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current value of STM1/OC3 interface Looback Timeout Counter"
|
|
::= { genEquipInterfacesSdhLoopbackStatusEntry 4 }
|
|
|
|
|
|
-- Interfaces AIS
|
|
genEquipInterfacesAIS OBJECT IDENTIFIER ::= {genEquipInterfaces 5}
|
|
|
|
genEquipInterfacesAISAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Control AIS Detection over all E1/T1/SDH ports."
|
|
::= { genEquipInterfacesAIS 1 }
|
|
|
|
-- Automatic State Propagation
|
|
genEquipInterfacesASP OBJECT IDENTIFIER ::= {genEquipInterfaces 6}
|
|
|
|
genEquipInterfacesASPAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the Automatic State Propagation"
|
|
::= { genEquipInterfacesASP 1 }
|
|
|
|
genEquipInterfacesASPLocalLOC OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enables fault propagation upon detection of local LOC.
|
|
This configuration is relevant only for non-protected single-pipe switch mode only."
|
|
::= { genEquipInterfacesASP 2 }
|
|
|
|
genEquipInterfacesASPLocalExcessiveBER OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enables fault propagation to the Ethernet interface upon detection of radio excessive BER.
|
|
This configuration is relevant only for non-protected single-pipe switch mode only."
|
|
|
|
::= { genEquipInterfacesASP 3 }
|
|
|
|
genEquipInterfacesASPACMthreshold OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
profile-0(0),
|
|
profile-1(1),
|
|
profile-2(2),
|
|
profile-3(3),
|
|
profile-4(4),
|
|
profile-5(5),
|
|
profile-6(6),
|
|
profile-7(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable the propagation when Radio ACM profile degrades below a defined profile.
|
|
This configuration is relevant only for non-protected single-pipe switch mode only when ACM
|
|
radio script is running."
|
|
::= { genEquipInterfacesASP 4 }
|
|
|
|
genEquipInterfacesASPRemoteFault OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter enables/disables automatic state propagation.
|
|
The following remote faults are propagated to the NE by default:
|
|
- Radio LOF
|
|
- Radio link ID mismatch
|
|
- Ethernet line LOC
|
|
any other remote faults are propagated to the NE only if they are
|
|
enabled at the local NE"
|
|
::= { genEquipInterfacesASP 5 }
|
|
|
|
-- NG ASP
|
|
genEquipInterfacesNGASP OBJECT IDENTIFIER ::= {genEquipInterfacesASP 7}
|
|
|
|
--
|
|
-- Automatic state propagation configuration table - asp-config-table
|
|
--
|
|
|
|
genEquipInterfacesNGASPConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesNGASPConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table configures automatic state propagation functionality."
|
|
::= { genEquipInterfacesNGASP 1 }
|
|
|
|
genEquipInterfacesNGASPConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesNGASPConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table configures automatic state propagation functionality entry."
|
|
INDEX { genEquipInterfacesNGASPConfigControlledInterfaceIfindex }
|
|
::= { genEquipInterfacesNGASPConfigTable 1 }
|
|
|
|
GenEquipInterfacesNGASPConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesNGASPConfigControlledInterfaceIfindex
|
|
INTEGER,
|
|
genEquipInterfacesNGASPConfigAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigMonitoredInterfaceIfindex
|
|
INTEGER,
|
|
genEquipInterfacesNGASPConfigAcmThreshold
|
|
INTEGER,
|
|
genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigRadioLofCriterionAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigMonitoredInterface56
|
|
INTEGER,
|
|
genEquipInterfacesNGASPConfigCsfModeAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesNGASPConfigMonitoredInterface
|
|
INTEGER,
|
|
genEquipInterfacesNGASPConfigDelayTime
|
|
INTEGER,
|
|
genEquipInterfacesNGASPConfigRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
genEquipInterfacesNGASPConfigControlledInterfaceIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index of the controlled interface.
|
|
This interface will be disabled upon initiation of auto state propagation"
|
|
::= { genEquipInterfacesNGASPConfigEntry 1 }
|
|
|
|
genEquipInterfacesNGASPConfigAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enables/disables automatic state propagation."
|
|
::= { genEquipInterfacesNGASPConfigEntry 2 }
|
|
|
|
genEquipInterfacesNGASPConfigMonitoredInterfaceIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index to the monitored interface.
|
|
Auto state propagation will act upon detecting a failure indication on this interface."
|
|
::= { genEquipInterfacesNGASPConfigEntry 3 }
|
|
|
|
genEquipInterfacesNGASPConfigAcmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ACM profile threshold for initiating auto state propagation."
|
|
::= { genEquipInterfacesNGASPConfigEntry 4 }
|
|
|
|
genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate auto state propagation upon local radio excessive BER."
|
|
::= { genEquipInterfacesNGASPConfigEntry 5 }
|
|
|
|
|
|
genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate auto state propagation upon local radio link Id mismatch."
|
|
::= { genEquipInterfacesNGASPConfigEntry 6 }
|
|
|
|
genEquipInterfacesNGASPConfigRadioLofCriterionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate auto state propagation upon local radio LOF."
|
|
::= { genEquipInterfacesNGASPConfigEntry 7 }
|
|
|
|
genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate auto state propagation upon remote radio LOF."
|
|
::= { genEquipInterfacesNGASPConfigEntry 8 }
|
|
|
|
genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate auto state propagation upon radio ACM RX profile below threshold."
|
|
::= { genEquipInterfacesNGASPConfigEntry 9 }
|
|
|
|
genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate auto state propagation upon radio ACM TX profile below threshold."
|
|
::= { genEquipInterfacesNGASPConfigEntry 10 }
|
|
|
|
genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate auto state propagation due to remote ethernet LOC."
|
|
::= { genEquipInterfacesNGASPConfigEntry 11 }
|
|
|
|
genEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Auto state propagation trigger by remote fault."
|
|
::= { genEquipInterfacesNGASPConfigEntry 12 }
|
|
|
|
genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initiate auto state propagation upon remote radio excessive BER."
|
|
::= { genEquipInterfacesNGASPConfigEntry 13 }
|
|
|
|
genEquipInterfacesNGASPConfigMonitoredInterface56 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface."
|
|
::= { genEquipInterfacesNGASPConfigEntry 14 }
|
|
|
|
genEquipInterfacesNGASPConfigCsfModeAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This mode upon failure sends CSF OAM packet instead of shuting down port."
|
|
::= { genEquipInterfacesNGASPConfigEntry 15 }
|
|
|
|
genEquipInterfacesNGASPConfigMonitoredInterface OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface."
|
|
::= { genEquipInterfacesNGASPConfigEntry 16 }
|
|
|
|
genEquipInterfacesNGASPConfigDelayTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Debounce time for ASP (in milliseconds)"
|
|
::= { genEquipInterfacesNGASPConfigEntry 17 }
|
|
|
|
genEquipInterfacesNGASPConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Row status to allow user add entries dynamically."
|
|
::= { genEquipInterfacesNGASPConfigEntry 30 }
|
|
|
|
|
|
|
|
-- PW T-card
|
|
genEquipInterfacesPW OBJECT IDENTIFIER ::= {genEquipInterfaces 7}
|
|
|
|
genEquipInterfacesPWCardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesPWCardEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PW-Card configuration table. using the table to configure the system PW-T features."
|
|
::= { genEquipInterfacesPW 1 }
|
|
|
|
genEquipInterfacesPWCardEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesPWCardEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PW-Card configuration table. using the table to configure the system PW-T features."
|
|
INDEX { genEquipInterfacesPWCardSlotNumber }
|
|
::= { genEquipInterfacesPWCardTable 1 }
|
|
|
|
GenEquipInterfacesPWCardEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesPWCardSlotNumber
|
|
INTEGER,
|
|
genEquipInterfacesPWCardExportClkSysRef
|
|
INTEGER,
|
|
genEquipInterfacesPWCardExportClkFrontPannel
|
|
INTEGER,
|
|
genEquipInterfacesPWCardExportClkSysRefCrPort
|
|
INTEGER,
|
|
genEquipInterfacesPWCardExportClkFrontPanelCrPort
|
|
INTEGER,
|
|
genEquipInterfacesPWCardFrontPanelClockSignalInput
|
|
INTEGER,
|
|
genEquipInterfacesPWCardFrontPanelClockSignalOutp
|
|
INTEGER,
|
|
genEquipInterfacesPWCardIpAddrUdpIpTraffic
|
|
IpAddress,
|
|
genEquipInterfacesPWCardIpSubnetUdpIpTraffic
|
|
IpAddress,
|
|
genEquipInterfacesPWCardClkRecoveryMode
|
|
INTEGER,
|
|
genEquipInterfacesPWCardDifferentialClkFrequency
|
|
INTEGER,
|
|
genEquipInterfacesPWCardDifferentialClkSource
|
|
INTEGER
|
|
}
|
|
|
|
genEquipInterfacesPWCardSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot number where the relevant PW card is inserted."
|
|
::= { genEquipInterfacesPWCardEntry 1 }
|
|
|
|
genEquipInterfacesPWCardExportClkSysRef OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
frontPanel(1),
|
|
clockRecovery(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Which card clock to provide as source towards system reference clock;
|
|
FrontPanel takes the clock inserted into the front panel interface;
|
|
ClockRecovery takes the clock recovered from the PW service mapped to the TDM port defined in ExportClkSysRefCrPort."
|
|
::= { genEquipInterfacesPWCardEntry 2 }
|
|
|
|
genEquipInterfacesPWCardExportClkFrontPannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
sysRefClk(1),
|
|
clockRecovery(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Which clock to export to the front panel clock; SysRefClk exports the system reference clock;
|
|
ClockRecovery exports the clock recovered from the PW service mapped to the TDM port defined in ExportClkFrontPanelCrPort."
|
|
|
|
::= { genEquipInterfacesPWCardEntry 3 }
|
|
|
|
genEquipInterfacesPWCardExportClkSysRefCrPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM port serving as clock recovery reference if ExportClkSysRef is set to ClockRecovery."
|
|
::= { genEquipInterfacesPWCardEntry 4 }
|
|
|
|
genEquipInterfacesPWCardExportClkFrontPanelCrPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM port serving as clock recovery reference if ExportClkFrontPannel is set to ClockRecovery."
|
|
::= { genEquipInterfacesPWCardEntry 5 }
|
|
|
|
genEquipInterfacesPWCardFrontPanelClockSignalInput OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sync(0),
|
|
e1t1(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configure the type of input clock signal of the front panel port.
|
|
Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal."
|
|
::= { genEquipInterfacesPWCardEntry 6 }
|
|
|
|
genEquipInterfacesPWCardFrontPanelClockSignalOutp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sync(0),
|
|
e1t1(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configure the type of output clock signal of the front panel port.
|
|
Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal."
|
|
::= { genEquipInterfacesPWCardEntry 7 }
|
|
|
|
genEquipInterfacesPWCardIpAddrUdpIpTraffic OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP Address for UDP/IP encapsulated PWs."
|
|
::= { genEquipInterfacesPWCardEntry 8 }
|
|
|
|
genEquipInterfacesPWCardIpSubnetUdpIpTraffic OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP Subnet for UDP/IP encapsulated PWs."
|
|
::= { genEquipInterfacesPWCardEntry 9 }
|
|
|
|
genEquipInterfacesPWCardClkRecoveryMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
adaptive(0),
|
|
differential(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock recovery mode for the card."
|
|
::= { genEquipInterfacesPWCardEntry 10 }
|
|
|
|
genEquipInterfacesPWCardDifferentialClkFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
n25MHz(1),
|
|
n125MHz(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frequency for differential clock (none for adaptive)."
|
|
::= { genEquipInterfacesPWCardEntry 11 }
|
|
|
|
genEquipInterfacesPWCardDifferentialClkSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
sysReference(2),
|
|
frontPanel(3),
|
|
n1588(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reference clock source for differential clock recovery (none for adaptive)."
|
|
::= { genEquipInterfacesPWCardEntry 12 }
|
|
|
|
|
|
-- PW t-card TDM ports table
|
|
genEquipInterfacesServicesPWTDMPortsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesServicesPWTDMPortsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of the 16 internal E1/DS1 ports."
|
|
::= { genEquipInterfacesPW 2 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesServicesPWTDMPortsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of the 16 internal E1/DS1 ports."
|
|
INDEX { ifIndex }
|
|
::= { genEquipInterfacesServicesPWTDMPortsTable 1 }
|
|
|
|
GenEquipInterfacesServicesPWTDMPortsEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesServicesPWTDMPortsLineType
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsLineCoding
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsAssigned
|
|
NoYes,
|
|
genEquipInterfacesServicesPWTDMPortsChannelization
|
|
EnableDisable,
|
|
genEquipInterfacesServicesPWTDMPortsTimingMode
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsClockSourceRef
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsClkSrcRefPort
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsClkSrcPWId
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsLoopback
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsTimeout
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsIdleCode
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsCounter
|
|
INTEGER,
|
|
genEquipInterfacesServicesPWTDMPortsLineStatus
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesServicesPWTDMPortsLineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
e1Unframed(0),
|
|
e1(1),
|
|
e1Crc(2),
|
|
e1Mf(3),
|
|
e1MfCrc(4),
|
|
ds1Uxnframed(5),
|
|
ds1Sf(6),
|
|
ds1Esf(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Line type of this TDM port. E1 types are for E1 systems and DS1 types for DS1 systems."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 1 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsLineCoding OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1.
|
|
Ami is only for T1."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 2 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsAssigned OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indication whether this port is currently assigned to a TDM trail."
|
|
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 3 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsChannelization OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TIndication whether this TDM port is channelized into DS0s."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 4 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsTimingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
loop(0),
|
|
absolute(1),
|
|
clockRecovery(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Transmission towards TDM timing mode.
|
|
Loop means transmitting with the received clock from TDM signal.
|
|
Absolute means transmitting with the clock selected by ClockSourceRef.
|
|
ClockRecovery means adaptive clock recovery mode."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 5 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsClockSourceRef OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
sysRefClk(1),
|
|
frontPanel(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock source reference for Absolute clock mode.
|
|
'none' for loop or clock-recovery timing modes."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 6 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsClkSrcRefPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM port serving as a clock reference for loop or clock-recovery timing modes"
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 7 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsClkSrcPWId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PW ID (as defined in genEquipServicesPWServicePWId) from which clock will be derived
|
|
for this port when TimingMode is ClockRecovery."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 8 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsLoopback OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
towardsLine(2),
|
|
towardsSystem(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or Disable line loopback on the E1/T1 interface."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 9 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1440)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Line loopback timeout, in minutes. 0 means no timer."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 10 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsIdleCode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value to be transmitted on this TDM port in unused timeslots."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 11 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Loopback time left (in seconds)."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 12 }
|
|
|
|
genEquipInterfacesServicesPWTDMPortsLineStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAlarm(0),
|
|
rxLof(1),
|
|
txLof(2),
|
|
rxAis(3),
|
|
txAis(4),
|
|
ts16RxLomf(5),
|
|
ts16TxLomf(6),
|
|
loopbackAlarm(7),
|
|
otherFailure(8)
|
|
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Line status of this TDM port."
|
|
::= { genEquipInterfacesServicesPWTDMPortsEntry 13 }
|
|
|
|
--
|
|
-- NG PW Interfaces
|
|
--
|
|
genEquipInterfacesNGPW OBJECT IDENTIFIER ::= {genEquipInterfacesPW 3}
|
|
|
|
--
|
|
-- PW-LIC card configuration table - pw-card-configuration-table
|
|
--
|
|
genEquipInterfacesNGPWCardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWCardEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of PW-LIC card level parameters."
|
|
::= { genEquipInterfacesNGPW 1 }
|
|
|
|
genEquipInterfacesNGPWCardEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesNGPWCardEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of PW-LIC card level parameters."
|
|
INDEX { genEquipInterfacesNGPWCardSlotID }
|
|
::= { genEquipInterfacesNGPWCardTable 1 }
|
|
|
|
GenEquipInterfacesNGPWCardEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesNGPWCardSlotID
|
|
INTEGER,
|
|
genEquipInterfacesNGPWCardExportClkSysRef
|
|
PWCclockSysRef,
|
|
genEquipInterfacesNGPWCardExportClkSysRefCrPort
|
|
INTEGER,
|
|
genEquipInterfacesNGPWCardIPAddress
|
|
IpAddress,
|
|
genEquipInterfacesNGPWCardIPSubnetMask
|
|
IpAddress,
|
|
genEquipInterfacesNGPWCardClkRecoveryMode
|
|
INTEGER,
|
|
genEquipInterfacesNGPWCardDifferentialClkSource
|
|
PWCDiffClockSrc,
|
|
genEquipInterfacesNGPWCardClockFreq
|
|
INTEGER,
|
|
genEquipInterfacesNGPWCardTDMType
|
|
INTEGER,
|
|
genEquipInterfacesNGPWCardLoopbackTimeout
|
|
INTEGER
|
|
}
|
|
|
|
genEquipInterfacesNGPWCardSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipInterfacesNGPWCardEntry 1 }
|
|
|
|
genEquipInterfacesNGPWCardExportClkSysRef OBJECT-TYPE
|
|
SYNTAX PWCclockSysRef
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configures which clock the PW-LIC exports towards the system."
|
|
::= { genEquipInterfacesNGPWCardEntry 2 }
|
|
|
|
genEquipInterfacesNGPWCardExportClkSysRefCrPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM port serving as clock recovery reference towards the system."
|
|
::= { genEquipInterfacesNGPWCardEntry 3 }
|
|
|
|
genEquipInterfacesNGPWCardIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP Address for UDP/IP and MPLS encapsulations."
|
|
::= { genEquipInterfacesNGPWCardEntry 4 }
|
|
|
|
genEquipInterfacesNGPWCardIPSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP subnet mask for UDP/IP and MPLS encapsulations."
|
|
::= { genEquipInterfacesNGPWCardEntry 5 }
|
|
|
|
genEquipInterfacesNGPWCardClkRecoveryMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
adaptive(0),
|
|
differential(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the card either in ACR or differential clock recovery mode."
|
|
::= { genEquipInterfacesNGPWCardEntry 6 }
|
|
|
|
genEquipInterfacesNGPWCardDifferentialClkSource OBJECT-TYPE
|
|
SYNTAX PWCDiffClockSrc
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reference clock source for differential clock recovery (none for adaptive)."
|
|
::= { genEquipInterfacesNGPWCardEntry 7 }
|
|
|
|
genEquipInterfacesNGPWCardClockFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
fr-25(1),
|
|
fr-125(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frequency for differential clock (none for adaptive)."
|
|
::= { genEquipInterfacesNGPWCardEntry 8 }
|
|
|
|
genEquipInterfacesNGPWCardTDMType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
e1(0),
|
|
ds1(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of TDM interfaces (E1, DS1)."
|
|
::= { genEquipInterfacesNGPWCardEntry 9 }
|
|
|
|
genEquipInterfacesNGPWCardLoopbackTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1440)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Timeout for TDM ports loopback."
|
|
::= { genEquipInterfacesNGPWCardEntry 10 }
|
|
|
|
|
|
-- pwe3-pwc-fp-clock-configuration-table
|
|
genEquipInterfacesNGPWClockInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWClockInterfaceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of the front panel clock interface in the PW-LIC."
|
|
::= { genEquipInterfacesNGPW 3 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesNGPWClockInterfaceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry allows configuration of the front panel clock interface in the PW-LIC."
|
|
INDEX { genEquipInterfacesNGPWClockInterfaceSlotID }
|
|
::= { genEquipInterfacesNGPWClockInterfaceTable 1 }
|
|
|
|
GenEquipInterfacesNGPWClockInterfaceEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesNGPWClockInterfaceSlotID
|
|
INTEGER,
|
|
genEquipInterfacesNGPWClockInterfaceIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesNGPWClockInterfaceAdminRx
|
|
EnableDisableSMI2,
|
|
genEquipInterfacesNGPWClockInterfaceAdminTx
|
|
EnableDisableSMI2,
|
|
genEquipInterfacesNGPWClockInterfaceExportClkFrontPannel
|
|
INTEGER,
|
|
genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort
|
|
INTEGER,
|
|
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput
|
|
PWfpClockSignal,
|
|
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput
|
|
PWfpClockSignal,
|
|
genEquipInterfacesNGPWClockInterfaceSSMAdmin
|
|
EnableDisableSMI2,
|
|
genEquipInterfacesNGPWClockInterfaceSSMBit
|
|
INTEGER,
|
|
genEquipInterfacesNGPWClockInterfaceSSMTxDefault
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesNGPWClockInterfaceSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 1 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Interface IfIndex."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 2 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceAdminRx OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock interface administrative state."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 3 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceAdminTx OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock interface administrative state."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 4 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceExportClkFrontPannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
sysRef(1),
|
|
clockRecovery(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configures which signal the PW-LIC exports to the front panel clock interface."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 5 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TDM port serving as clock recovery reference for front panel interface."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 6 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput OBJECT-TYPE
|
|
SYNTAX PWfpClockSignal
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Expected input signal type: E1 or differential sine/square 3.3V 2MHz"
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 7 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput OBJECT-TYPE
|
|
SYNTAX PWfpClockSignal
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Output signal type: E1 or differential sine/square 3.3V 2MH."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 8 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceSSMAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/disable SSM sending in this interface."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 9 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceSSMBit OBJECT-TYPE
|
|
SYNTAX INTEGER (4..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines which bit in the frame."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 10 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceSSMTxDefault OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"..."
|
|
::= { genEquipInterfacesNGPWClockInterfaceEntry 11 }
|
|
|
|
|
|
-- pw-clock-interface-status-table
|
|
genEquipInterfacesNGPWClockInterfaceStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWClockInterfaceStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains information about current state of the clock interface in the PW-LIC."
|
|
::= { genEquipInterfacesNGPW 4 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesNGPWClockInterfaceStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry contains information about current state of the clock interface in the PW-LIC."
|
|
INDEX { genEquipInterfacesNGPWClockInterfaceStatusSlotID }
|
|
::= { genEquipInterfacesNGPWClockInterfaceStatusTable 1 }
|
|
|
|
GenEquipInterfacesNGPWClockInterfaceStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesNGPWClockInterfaceStatusSlotID
|
|
INTEGER,
|
|
genEquipInterfacesNGPWClockInterfaceStatusIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesNGPWClockInterfaceStatusOperationalState
|
|
DownUp,
|
|
genEquipInterfacesNGPWClockInterfaceStatusSSMTx
|
|
INTEGER,
|
|
genEquipInterfacesNGPWClockInterfaceStatusSSMRx
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesNGPWClockInterfaceStatusSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 1 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceStatusIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Interface IfIndex."
|
|
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 2 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceStatusOperationalState OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clock interface operational state."
|
|
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 3 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceStatusSSMTx OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Currently transmitted SSM bits."
|
|
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 4 }
|
|
|
|
genEquipInterfacesNGPWClockInterfaceStatusSSMRx OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Currently received SSM bits."
|
|
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 5 }
|
|
|
|
|
|
-- pw-eth-port-configuration-table
|
|
genEquipInterfacesNGPWEthInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWEthInterfaceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows enabling/disabling the PW-LIC internal Ethernet port."
|
|
::= { genEquipInterfacesNGPW 5 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesNGPWEthInterfaceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows enabling/disabling the PW-LIC internal Ethernet port."
|
|
INDEX { genEquipInterfacesNGPWEthInterfaceSlotID }
|
|
::= { genEquipInterfacesNGPWEthInterfaceTable 1 }
|
|
|
|
GenEquipInterfacesNGPWEthInterfaceEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesNGPWEthInterfaceSlotID
|
|
INTEGER,
|
|
genEquipInterfacesNGPWEthInterfaceIfIndex
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesNGPWEthInterfaceSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipInterfacesNGPWEthInterfaceEntry 1 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Interface IfIndex."
|
|
::= { genEquipInterfacesNGPWEthInterfaceEntry 2 }
|
|
|
|
|
|
-- pw-eth-port-status-table
|
|
genEquipInterfacesNGPWEthInterfaceStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWEthInterfaceStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains status and RMON statistics of the internal PW-LIC Ethernet port."
|
|
::= { genEquipInterfacesNGPW 6 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesNGPWEthInterfaceStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table enatry contains status and RMON statistics of the internal PW-LIC Ethernet port."
|
|
INDEX { genEquipInterfacesNGPWEthInterfaceStatusIfIndex }
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusTable 1 }
|
|
|
|
GenEquipInterfacesNGPWEthInterfaceStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesNGPWEthInterfaceStatusIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesNGPWEthInterfaceStatusMACAddress
|
|
OCTET STRING,
|
|
genEquipInterfacesNGPWEthInterfaceStatusClearStats
|
|
NoYes,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxBytes
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxPackets
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrFcs
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxMulticast
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxBroadcast
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxMacControl
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxMacPause
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrCode
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxUndersize
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxOversize
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxFragments
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxJabber
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxDropped
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxBytes
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxPackets
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxMulticast
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxBroadcast
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxMacPause
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxDefer
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxLateCollision
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxNoCollision
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxDropped
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxJabber
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxErrFcs
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxControl
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxOversize
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxUndersize
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxFragments
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxIwFrames
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrMru
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrSdu
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun
|
|
Counter64,
|
|
genEquipInterfacesNGPWEthInterfaceStatusSlotID
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Interface IfIndex."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 2 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusMACAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC Address to be used in Ethernet and UDP/IP PSN packets"
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 3 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusClearStats OBJECT-TYPE
|
|
SYNTAX NoYes
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clears internal Ethernet port RMON counters"
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 4 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 64 bytes in length inclusive"
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 5 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 65 to 127 bytes in length inclusive."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 6 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 128 to 255 bytes in length inclusive."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 7 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 256 to 511 bytes in length inclusive."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 8 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 512 to 1023 bytes in length inclusive."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 9 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1024 to 1518 bytes in length inclusive."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 10 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1519 to 1522 bytes in length inclusive."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 11 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of byte count of frames received with 0 to 1518 bytes, including those in bad packets."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 12 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of received packets (including bad packets, all Unicast, Broadcast, and Multicast packets)."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 13 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrFcs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames received that have a integral 64 to 1518 byte length and contain a Frame Check Sequence error.."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 14 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxMulticast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of multicast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 15 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxBroadcast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of broadcast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 16 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxMacControl OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of MAC Control frames received (PAUSE &Unsupported)."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 17 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxMacPause OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames received."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 18 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of MAC Control Frames received that contain an opcode other than a PAUSE."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 19 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrCode OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of instances where a valid carrier was present and at least one invalid data symbol was detected."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 20 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of false carriers detected during idle, as defined by a 1 on RX_ER and an '0xE' on RXD."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 21 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxUndersize OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames received that are less than 64 bytes in length, contain a valid FCS, and were otherwise well formed."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 22 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxOversize OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames received that exceeded maximum bytes in length, contain a valid FCS, and were otherwise well formed."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 23 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxFragments OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames received which are less than 64 bytes in length and contain an invalid FCS."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 24 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxJabber OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames received which exceed maximum length and contain an invalid FCS, including alignment errors."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 25 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxDropped OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames received that are streamed to the system but are later dropped due to lack of system resources."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 26 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of bytes that were put on the wire including fragments of frames that were involved with collisions."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 27 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of transmitted packets."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 28 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxMulticast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of Multicast valid frames transmitted (excluding Broadcast frames)."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 29 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxBroadcast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of Broadcast frames transmitted (excluding Multicast frames)."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 30 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxMacPause OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames transmitted."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 31 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxDefer OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames that were deferred upon first transmission attempt. Does not include frames involved in collisions.."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 32 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of frames aborted that were deferred for an excessive period of time (3036 byte times)."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 33 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames transmitted which experienced exactly one collision during transmission."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 34 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames transmitted which experienced 2-15 collisions."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 35 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxLateCollision OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames transmitted that experienced a late collision during a transmission attempt."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 36 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of frames that experienced 16 collisions during transmission and were aborted."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 37 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxNoCollision OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of frames transmitted that had no collision."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 38 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of times a valid PAUSE MAC Control frame was transmitted and honored."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 39 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxDropped OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of times the input PFH is asserted."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 40 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxJabber OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of oversized transmitted frames with an incorrect FCS value."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 41 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxErrFcs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of valid sized packets transmitted with an incorrec tFCS value."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 42 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxControl OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of valid size frames transmitted with a Type Field signifying a Control frame.."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 43 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxOversize OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of oversized transmitted frames with a correct."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 44 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxUndersize OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with a correctFCS value."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 45 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxFragments OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with an incorrect FCS value."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 46 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxIwFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames that were received and sent to the L3 Interworking module."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 47 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due free buffer pool (FBP) Overrun."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 48 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of the number of received Ethernet frames whose MAC-DA is not valid."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 49 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrMru OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due the Maximum Receive Unit."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 50 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrSdu OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of the number of Ethernet frames which were closed due the maximum frame size has been exceeded."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 51 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of times Ethernet transmitter underun occurred."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 52 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unsigned 64-bit modulo counter of number of received Ethernet frames which were closed or discarded due to a receive buffer overrun event."
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 53 }
|
|
|
|
genEquipInterfacesNGPWEthInterfaceStatusSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted"
|
|
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 54 }
|
|
|
|
|
|
--
|
|
-- PW-LIC card staus table - pw-card-status-table
|
|
--
|
|
genEquipInterfacesNGPWCardStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWCardStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains information about PW-LIC card level status."
|
|
::= { genEquipInterfacesNGPW 7 }
|
|
|
|
genEquipInterfacesNGPWCardStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesNGPWCardStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains information about PW-LIC card level status."
|
|
INDEX { genEquipInterfacesNGPWCardStatusSlotID }
|
|
::= { genEquipInterfacesNGPWCardStatusTable 1 }
|
|
|
|
GenEquipInterfacesNGPWCardStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesNGPWCardStatusSlotID
|
|
INTEGER,
|
|
genEquipInterfacesNGPWCardStatusSWVersion
|
|
DisplayString
|
|
}
|
|
|
|
genEquipInterfacesNGPWCardStatusSlotID OBJECT-TYPE
|
|
SYNTAX INTEGER (2..12)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Slot where PW-LIC is inserted."
|
|
::= { genEquipInterfacesNGPWCardStatusEntry 1 }
|
|
|
|
genEquipInterfacesNGPWCardStatusSWVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bundle ID."
|
|
::= { genEquipInterfacesNGPWCardStatusEntry 2 }
|
|
|
|
|
|
|
|
-- Switch Application Branch
|
|
genEquipInterfacesCet OBJECT IDENTIFIER ::= {genEquipInterfaces 8}
|
|
|
|
genEquipInterfacesCetGeneral OBJECT IDENTIFIER ::= {genEquipInterfacesCet 1}
|
|
|
|
genEquipInterfacesCetMru OBJECT-TYPE
|
|
SYNTAX INTEGER (64..9612)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum Frame Size."
|
|
::= { genEquipInterfacesCetGeneral 1 }
|
|
|
|
--
|
|
-- Switch Application if-physical-configuration-table
|
|
--
|
|
|
|
genEquipInterfacesCetPhyConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetPhyConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet physical port configuration table."
|
|
::= { genEquipInterfacesCet 2 }
|
|
|
|
genEquipInterfacesCetPhyConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetPhyConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet physical port configuration table entry."
|
|
INDEX { genEquipInterfacesCetPhyConfigIfIndex }
|
|
::= { genEquipInterfacesCetPhyConfigTable 1 }
|
|
|
|
GenEquipInterfacesCetPhyConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetPhyConfigIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetPhyConfigDescription
|
|
DisplayString,
|
|
genEquipInterfacesCetPhyConfigMediaType
|
|
MediaType,
|
|
genEquipInterfacesCetPhyConfigAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetPhyConfigAutoNegotiation
|
|
AutoNegMode,
|
|
genEquipInterfacesCetPhyConfigSpeed
|
|
SpeedDefs,
|
|
genEquipInterfacesCetPhyConfigDuplex
|
|
HalfFull,
|
|
genEquipInterfacesCetPhyConfigMasterSlave
|
|
MasterSalveSetMode,
|
|
-- genEquipInterfacesCetPhyConfigFlowControl
|
|
-- FlowControl,
|
|
genEquipInterfacesCetPhyConfigIfg
|
|
INTEGER,
|
|
genEquipInterfacesCetPhyConfigPreamble
|
|
INTEGER,
|
|
genEquipInterfacesCetPhyConfigMacAddress
|
|
OCTET STRING,
|
|
genEquipInterfacesCetPhyConfigType
|
|
PortType,
|
|
genEquipInterfacesCetPhyConfigPortPmAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetPhyConfigPortPmRxBytesThreshold
|
|
INTEGER,
|
|
genEquipInterfacesCetPhyConfigPortPmTxBytesThreshold
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetPhyConfigIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet physical port if-index table key."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 1 }
|
|
|
|
genEquipInterfacesCetPhyConfigDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical port user description."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 2 }
|
|
|
|
genEquipInterfacesCetPhyConfigMediaType OBJECT-TYPE
|
|
SYNTAX MediaType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical port media type."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 3 }
|
|
|
|
genEquipInterfacesCetPhyConfigAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical port administration."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 4 }
|
|
|
|
genEquipInterfacesCetPhyConfigAutoNegotiation OBJECT-TYPE
|
|
SYNTAX AutoNegMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical port auto negotiation state."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 5 }
|
|
|
|
genEquipInterfacesCetPhyConfigSpeed OBJECT-TYPE
|
|
SYNTAX SpeedDefs
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical maximum port speed Affects Auto Neg Capability Advertised Bits."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 6 }
|
|
|
|
genEquipInterfacesCetPhyConfigDuplex OBJECT-TYPE
|
|
SYNTAX HalfFull
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical port duplex Affects Auto Neg Capability Advertised Bits."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 7 }
|
|
|
|
genEquipInterfacesCetPhyConfigMasterSlave OBJECT-TYPE
|
|
SYNTAX MasterSalveSetMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical port master slave for 1000BaseT Affects Auto Neg
|
|
Capability Advertised Bits."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 8 }
|
|
|
|
--genEquipInterfacesCetPhyConfigFlowControl OBJECT-TYPE
|
|
-- SYNTAX FlowControl
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Setting Ethernet physical port flow-control Affects Auto Neg Capability Advertised Bits"
|
|
--::= { genEquipInterfacesCetPhyConfigEntry 9 }
|
|
|
|
genEquipInterfacesCetPhyConfigIfg OBJECT-TYPE
|
|
SYNTAX INTEGER (6..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Inter Frame GAP value in bytes."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 10 }
|
|
|
|
genEquipInterfacesCetPhyConfigPreamble OBJECT-TYPE
|
|
SYNTAX INTEGER (6..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"port preamble value in bytes."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 11 }
|
|
|
|
genEquipInterfacesCetPhyConfigMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet physical port mac-address."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 12 }
|
|
|
|
genEquipInterfacesCetPhyConfigType OBJECT-TYPE
|
|
SYNTAX PortType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical port type."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 13 }
|
|
|
|
genEquipInterfacesCetPhyConfigPortPmAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable PMs on port level."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 14 }
|
|
|
|
genEquipInterfacesCetPhyConfigPortPmRxBytesThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Threshold of received bytes PM."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 15 }
|
|
|
|
genEquipInterfacesCetPhyConfigPortPmTxBytesThreshold OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Threshold of transmitted bytes PM."
|
|
::= { genEquipInterfacesCetPhyConfigEntry 16 }
|
|
|
|
|
|
--
|
|
-- Interfaces Switch Application Physical Port Status Table
|
|
-- if-physical-status-table
|
|
--
|
|
|
|
genEquipInterfacesCetPhyStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetPhyStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet physical port configuration table."
|
|
::= { genEquipInterfacesCet 3 }
|
|
|
|
genEquipInterfacesCetPhyStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetPhyStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table allows configuration of the 16 internal E1/DS1 ports."
|
|
INDEX { genEquipInterfacesCetPhyStatusIfIndex }
|
|
::= { genEquipInterfacesCetPhyStatusTable 1 }
|
|
|
|
GenEquipInterfacesCetPhyStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetPhyStatusIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetPhyStatusMediaType
|
|
MediaType,
|
|
genEquipInterfacesCetPhyStatusOperationalStatus
|
|
DownUp,
|
|
genEquipInterfacesCetPhystatusAutoNegotiation
|
|
AutoNegMode,
|
|
genEquipInterfacesCetPhyStatusSpeed
|
|
SpeedDefs,
|
|
genEquipInterfacesCetPhyStatusDuplex
|
|
HalfFull,
|
|
genEquipInterfacesCetPhyStatusMasterSlave
|
|
MasterSalveSetMode
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetPhyStatusIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet physical port if-index table key."
|
|
::= { genEquipInterfacesCetPhyStatusEntry 1 }
|
|
|
|
genEquipInterfacesCetPhyStatusMediaType OBJECT-TYPE
|
|
SYNTAX MediaType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting Ethernet physical port media type."
|
|
::= { genEquipInterfacesCetPhyStatusEntry 2 }
|
|
|
|
genEquipInterfacesCetPhyStatusOperationalStatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet physical port operational-status."
|
|
::= { genEquipInterfacesCetPhyStatusEntry 3 }
|
|
|
|
genEquipInterfacesCetPhystatusAutoNegotiation OBJECT-TYPE
|
|
SYNTAX AutoNegMode
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet physical port auto negotiation status."
|
|
::= { genEquipInterfacesCetPhyStatusEntry 4 }
|
|
|
|
genEquipInterfacesCetPhyStatusSpeed OBJECT-TYPE
|
|
SYNTAX SpeedDefs
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Actual Ethernet physical port speed."
|
|
::= { genEquipInterfacesCetPhyStatusEntry 5 }
|
|
|
|
genEquipInterfacesCetPhyStatusDuplex OBJECT-TYPE
|
|
SYNTAX HalfFull
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Actual Ethernet physical port duplex."
|
|
::= { genEquipInterfacesCetPhyStatusEntry 6 }
|
|
|
|
genEquipInterfacesCetPhyStatusMasterSlave OBJECT-TYPE
|
|
SYNTAX MasterSalveSetMode
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Actual Ethernet physical port master slave for 1000BaseT."
|
|
::= { genEquipInterfacesCetPhyStatusEntry 7 }
|
|
|
|
--
|
|
-- Switch Application if-logical-configuration-table
|
|
--
|
|
|
|
genEquipInterfacesCetLogicConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetLogicConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the ingress logical port configuration (it is the same point of view for
|
|
single interface or group of ports) ."
|
|
::= { genEquipInterfacesCet 4 }
|
|
|
|
genEquipInterfacesCetLogicConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetLogicConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the ingress logical port configuration (it is the same point of
|
|
view for single interface or group of ports)."
|
|
INDEX { genEquipInterfacesCetLogicConfigIfIndex }
|
|
::= { genEquipInterfacesCetLogicConfigTable 1 }
|
|
|
|
GenEquipInterfacesCetLogicConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetLogicConfigIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLogicConfigTrafficFlow
|
|
EnableDisable,
|
|
genEquipInterfacesCetLogicConfigEdgePort
|
|
EdgePortType,
|
|
genEquipInterfacesCetLogicConfigIngressTcamClassification
|
|
INTEGER,
|
|
genEquipInterfacesCetLogicConfigDefaultVlanTag
|
|
INTEGER,
|
|
genEquipInterfacesCetLogicConfigInLineCompensation
|
|
INTEGER,
|
|
genEquipInterfacesCetLogicConfigOutLineCompensation
|
|
INTEGER,
|
|
genEquipInterfacesCetLogicConfigPclId
|
|
INTEGER,
|
|
genEquipInterfacesCetLogicConfigDefCos
|
|
INTEGER,
|
|
genEquipInterfacesCetLogicConfigVlanUpToCosTrustMode
|
|
TrustMode,
|
|
genEquipInterfacesCetLogicConfigDscpToCosTrustMode
|
|
TrustMode,
|
|
genEquipInterfacesCetLogicConfigMplsExpToCosTrustMode
|
|
TrustMode,
|
|
genEquipInterfacesCetLogicConfigMacAddress
|
|
OCTET STRING,
|
|
genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetLogicConfigLoopbackAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetLogicConfigLoopbackDuration
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetLogicConfigIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 1 }
|
|
|
|
genEquipInterfacesCetLogicConfigTrafficFlow OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Control the the traffic via logical port which is connected to physical interface
|
|
(in case of group it control the all interfaces of the group)."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 2 }
|
|
|
|
genEquipInterfacesCetLogicConfigEdgePort OBJECT-TYPE
|
|
SYNTAX EdgePortType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port Edge Mode (edge / non-edge)."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 3 }
|
|
|
|
genEquipInterfacesCetLogicConfigIngressTcamClassification OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ingress-tcam-classification."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 4 }
|
|
|
|
genEquipInterfacesCetLogicConfigDefaultVlanTag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Default Network Vlan ID."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 5 }
|
|
|
|
genEquipInterfacesCetLogicConfigInLineCompensation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Layer 1 Ingress Byte Compensation."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 6 }
|
|
|
|
genEquipInterfacesCetLogicConfigOutLineCompensation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..26)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Layer 1 Egress Byte Compensation from the specific logical port."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 7 }
|
|
|
|
genEquipInterfacesCetLogicConfigPclId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"...."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 8 }
|
|
|
|
genEquipInterfacesCetLogicConfigDefCos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port Default CoS."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 9 }
|
|
|
|
genEquipInterfacesCetLogicConfigVlanUpToCosTrustMode OBJECT-TYPE
|
|
SYNTAX TrustMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trust VLAN UP bits for classification from the specific logical port."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 10 }
|
|
|
|
genEquipInterfacesCetLogicConfigDscpToCosTrustMode OBJECT-TYPE
|
|
SYNTAX TrustMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trust DSCP for classification from the specific logical port."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 11 }
|
|
|
|
genEquipInterfacesCetLogicConfigMplsExpToCosTrustMode OBJECT-TYPE
|
|
SYNTAX TrustMode
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trust MPLS EXP bits for classification from the specific logical port."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 12 }
|
|
|
|
genEquipInterfacesCetLogicConfigMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet logical port mac-address."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 13 }
|
|
|
|
genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Swap MAC address for Ethernet port loopback."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 14 }
|
|
|
|
genEquipInterfacesCetLogicConfigLoopbackAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet loopback admin."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 15 }
|
|
|
|
genEquipInterfacesCetLogicConfigLoopbackDuration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet loopback duration. Allowed values 1 to 9000 seconds."
|
|
::= { genEquipInterfacesCetLogicConfigEntry 16 }
|
|
|
|
--
|
|
-- Switch Application if-logical-mgr
|
|
--
|
|
|
|
genEquipInterfacesCetLogicStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetLogicStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table holds the ingress logical port status
|
|
(it is the same point of view for single interface or group of ports)."
|
|
::= { genEquipInterfacesCet 5 }
|
|
|
|
genEquipInterfacesCetLogicStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetLogicStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table entry holds the ingress logical port status
|
|
(it is the same point of view for single interface or group of ports)."
|
|
INDEX { genEquipInterfacesCetLogicStatusIfIndex }
|
|
::= { genEquipInterfacesCetLogicStatusTable 1 }
|
|
|
|
GenEquipInterfacesCetLogicStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetLogicStatusIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLogicStatusOperationalStatus
|
|
DownUp
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetLogicStatusIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipInterfacesCetLogicStatusEntry 1 }
|
|
|
|
genEquipInterfacesCetLogicStatusOperationalStatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet logical port operational-status (Up or Down)."
|
|
::= { genEquipInterfacesCetLogicStatusEntry 2 }
|
|
|
|
|
|
--
|
|
-- Switch Application if-logical-broadcast_policing-table
|
|
--
|
|
|
|
genEquipInterfacesCetBcastPolicerAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetBcastPolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Port Broadcast configuration table."
|
|
::= { genEquipInterfacesCet 6 }
|
|
|
|
genEquipInterfacesCetBcastPolicerAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetBcastPolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Port Broadcast configuration table entry."
|
|
INDEX { genEquipInterfacesCetBcastPolicerAssociationIfIndex }
|
|
::= { genEquipInterfacesCetBcastPolicerAssociationTable 1 }
|
|
|
|
GenEquipInterfacesCetBcastPolicerAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetBcastPolicerAssociationIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId
|
|
INTEGER,
|
|
genEquipInterfacesCetBcastPolicerAssociationAssociationAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetBcastPolicerAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipInterfacesCetBcastPolicerAssociationEntry 1 }
|
|
|
|
genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Policer Profile."
|
|
::= { genEquipInterfacesCetBcastPolicerAssociationEntry 2 }
|
|
|
|
genEquipInterfacesCetBcastPolicerAssociationAssociationAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Broadcast Policer Admin (enable / disable)."
|
|
::= { genEquipInterfacesCetBcastPolicerAssociationEntry 3 }
|
|
|
|
genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipInterfacesCetBcastPolicerAssociationEntry 30 }
|
|
|
|
|
|
|
|
--
|
|
-- Switch Application if-logical-ethertype1_policing-table
|
|
--
|
|
|
|
genEquipInterfacesCetEtype1PolicerAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype1PolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Policing of user configuration ethertype type 1 (at port level) table."
|
|
::= { genEquipInterfacesCet 7 }
|
|
|
|
genEquipInterfacesCetEtype1PolicerAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetEtype1PolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Policing of user configuration ethertype type 1 (at port level) table entry."
|
|
INDEX { genEquipInterfacesCetEtype1PolicerAssociationIfIndex }
|
|
::= { genEquipInterfacesCetEtype1PolicerAssociationTable 1 }
|
|
|
|
GenEquipInterfacesCetEtype1PolicerAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetEtype1PolicerAssociationIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype1PolicerAssociationProfileId
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype1PolicerAssociationEthertype
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype1PolicerAssociationAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetEtype1PolicerAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetEtype1PolicerAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 1 }
|
|
|
|
genEquipInterfacesCetEtype1PolicerAssociationProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Profile ID."
|
|
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 2 }
|
|
|
|
genEquipInterfacesCetEtype1PolicerAssociationEthertype OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Ethertype 1 user configuration value."
|
|
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 3 }
|
|
|
|
genEquipInterfacesCetEtype1PolicerAssociationAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Ethertype 1 Policer Admin (enable / disable)."
|
|
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 4 }
|
|
|
|
genEquipInterfacesCetEtype1PolicerAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 30 }
|
|
|
|
|
|
--
|
|
-- Switch Application if-logical-ethertype2_policing-table
|
|
--
|
|
|
|
genEquipInterfacesCetEtype2PolicerAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype2PolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Policing of user configuration ethertype type 2 (at port level) table."
|
|
::= { genEquipInterfacesCet 8 }
|
|
|
|
genEquipInterfacesCetEtype2PolicerAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetEtype2PolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Policing of user configuration ethertype type 2 (at port level) table."
|
|
INDEX { genEquipInterfacesCetEtype2PolicerAssociationIfIndex }
|
|
::= { genEquipInterfacesCetEtype2PolicerAssociationTable 1 }
|
|
|
|
GenEquipInterfacesCetEtype2PolicerAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetEtype2PolicerAssociationIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype2PolicerAssociationEthertype
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype2PolicerAssociationAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetEtype2PolicerAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetEtype2PolicerAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 1 }
|
|
|
|
genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Profile ID."
|
|
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 2 }
|
|
|
|
genEquipInterfacesCetEtype2PolicerAssociationEthertype OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Ethertype 2 user configuration value."
|
|
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 3 }
|
|
|
|
genEquipInterfacesCetEtype2PolicerAssociationAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Ethertype 2 Policer Admin (enable / disable)."
|
|
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 4 }
|
|
|
|
genEquipInterfacesCetEtype2PolicerAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 30 }
|
|
|
|
|
|
|
|
--
|
|
-- Switch Application if-logical-ethertype3_policing-table
|
|
--
|
|
|
|
genEquipInterfacesCetEtype3PolicerAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype3PolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Policing of user configuration ethertype type 3 (at port level) table."
|
|
::= { genEquipInterfacesCet 9 }
|
|
|
|
genEquipInterfacesCetEtype3PolicerAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetEtype3PolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Policing of user configuration ethertype type 3 (at port level) table entry."
|
|
INDEX { genEquipInterfacesCetEtype3PolicerAssociationIfIndex }
|
|
::= { genEquipInterfacesCetEtype3PolicerAssociationTable 1 }
|
|
|
|
GenEquipInterfacesCetEtype3PolicerAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetEtype3PolicerAssociationIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype3PolicerAssociationEthertype
|
|
INTEGER,
|
|
genEquipInterfacesCetEtype3PolicerAssociationAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetEtype3PolicerAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetEtype3PolicerAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 1 }
|
|
|
|
genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Profile ID."
|
|
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 2 }
|
|
|
|
genEquipInterfacesCetEtype3PolicerAssociationEthertype OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Ethertype 3 user configuration value."
|
|
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 3 }
|
|
|
|
genEquipInterfacesCetEtype3PolicerAssociationAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Ethertype 3 Policer Admin (enable / disable)."
|
|
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 4 }
|
|
|
|
genEquipInterfacesCetEtype3PolicerAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 30 }
|
|
|
|
|
|
--
|
|
-- Switch Application if-logical-multicast_policing-table
|
|
--
|
|
|
|
genEquipInterfacesCetMcastPolicerAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetMcastPolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Port Multicast configuration table."
|
|
::= { genEquipInterfacesCet 10 }
|
|
|
|
genEquipInterfacesCetMcastPolicerAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetMcastPolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Port Multicast configuration table."
|
|
INDEX { genEquipInterfacesCetMcastPolicerAssociationIfIndex }
|
|
::= { genEquipInterfacesCetMcastPolicerAssociationTable 1 }
|
|
|
|
GenEquipInterfacesCetMcastPolicerAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetMcastPolicerAssociationIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId
|
|
INTEGER,
|
|
genEquipInterfacesCetMcastPolicerAssociationAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetMcastPolicerAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipInterfacesCetMcastPolicerAssociationEntry 1 }
|
|
|
|
genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Profile ID."
|
|
::= { genEquipInterfacesCetMcastPolicerAssociationEntry 2 }
|
|
|
|
genEquipInterfacesCetMcastPolicerAssociationAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Multicast Policer Admin (enable / disable)."
|
|
::= { genEquipInterfacesCetMcastPolicerAssociationEntry 3 }
|
|
|
|
genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipInterfacesCetMcastPolicerAssociationEntry 30 }
|
|
|
|
|
|
--
|
|
-- Switch Application if-logical-unicast_policing-table
|
|
--
|
|
|
|
genEquipInterfacesCetUcastPolicerAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetUcastPolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Port Multicast configuration table."
|
|
::= { genEquipInterfacesCet 11 }
|
|
|
|
genEquipInterfacesCetUcastPolicerAssociationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetUcastPolicerAssociationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Port Multicast configuration table."
|
|
INDEX { genEquipInterfacesCetUcastPolicerAssociationIfIndex }
|
|
::= { genEquipInterfacesCetUcastPolicerAssociationTable 1 }
|
|
|
|
GenEquipInterfacesCetUcastPolicerAssociationEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetUcastPolicerAssociationIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId
|
|
INTEGER,
|
|
genEquipInterfacesCetUcastPolicerAssociationAdmin
|
|
EnableDisable,
|
|
genEquipInterfacesCetUcastPolicerAssociationRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetUcastPolicerAssociationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet Logical port if-index table key."
|
|
::= { genEquipInterfacesCetUcastPolicerAssociationEntry 1 }
|
|
|
|
genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Policer Profile ID."
|
|
::= { genEquipInterfacesCetUcastPolicerAssociationEntry 2 }
|
|
|
|
genEquipInterfacesCetUcastPolicerAssociationAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisable
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ingress Unicast Policer Admin (enable / disable)."
|
|
::= { genEquipInterfacesCetUcastPolicerAssociationEntry 3 }
|
|
|
|
genEquipInterfacesCetUcastPolicerAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipInterfacesCetUcastPolicerAssociationEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sys-if-logical-mgr-if-logical-lag-table
|
|
--
|
|
|
|
genEquipInterfacesCetLagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCetLagEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table holds the members of a Link Aggregation Group."
|
|
::= { genEquipInterfacesCet 12 }
|
|
|
|
genEquipInterfacesCetLagEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCetLagEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table holds the members of a Link Aggregation Group entry."
|
|
INDEX { genEquipInterfacesCetLagIfIndex }
|
|
::= { genEquipInterfacesCetLagTable 1 }
|
|
|
|
GenEquipInterfacesCetLagEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCetLagIfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember1IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember2IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember3IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember4IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember5IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember6IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember7IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember8IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember9IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember10IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember11IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember12IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember13IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember14IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember15IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagMember16IfIndex
|
|
INTEGER,
|
|
genEquipInterfacesCetLagRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
genEquipInterfacesCetLagIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation group IF index."
|
|
::= { genEquipInterfacesCetLagEntry 1 }
|
|
|
|
genEquipInterfacesCetLagMember1IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 1 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 2 }
|
|
|
|
genEquipInterfacesCetLagMember2IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 2 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 3 }
|
|
|
|
genEquipInterfacesCetLagMember3IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 3 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 4 }
|
|
|
|
genEquipInterfacesCetLagMember4IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 4 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 5 }
|
|
|
|
genEquipInterfacesCetLagMember5IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 5 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 6 }
|
|
|
|
genEquipInterfacesCetLagMember6IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 6 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 7 }
|
|
|
|
genEquipInterfacesCetLagMember7IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 7 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 8 }
|
|
|
|
genEquipInterfacesCetLagMember8IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 8 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 9 }
|
|
|
|
genEquipInterfacesCetLagMember9IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 9 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 10 }
|
|
|
|
genEquipInterfacesCetLagMember10IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 9 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 11 }
|
|
|
|
genEquipInterfacesCetLagMember11IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 11 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 12 }
|
|
|
|
genEquipInterfacesCetLagMember12IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 12 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 13 }
|
|
|
|
genEquipInterfacesCetLagMember13IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 13 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 14 }
|
|
|
|
genEquipInterfacesCetLagMember14IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 14 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 15 }
|
|
|
|
genEquipInterfacesCetLagMember15IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 15 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 16 }
|
|
|
|
genEquipInterfacesCetLagMember16IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Link aggregation member 16 IF index."
|
|
::= { genEquipInterfacesCetLagEntry 17 }
|
|
|
|
genEquipInterfacesCetLagRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table Mib Row Status."
|
|
::= { genEquipInterfacesCetLagEntry 30 }
|
|
|
|
--
|
|
-- Switch Application sw-ap-service-to-instance-table
|
|
--
|
|
|
|
genEquipServicesCetConfigServiceToInstanceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipServicesCetConfigServiceToInstanceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table is used for mapping xSTP instance number per service."
|
|
::= { genEquipInterfacesCet 13 }
|
|
|
|
genEquipServicesCetConfigServiceToInstanceEntry OBJECT-TYPE
|
|
SYNTAX GenEquipServicesCetConfigServiceToInstanceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry is used for mapping xSTP instance number per service."
|
|
INDEX { genEquipServicesCetConfigServiceToInstanceServiceIndex }
|
|
::= { genEquipServicesCetConfigServiceToInstanceTable 1 }
|
|
|
|
GenEquipServicesCetConfigServiceToInstanceEntry ::=
|
|
SEQUENCE {
|
|
genEquipServicesCetConfigServiceToInstanceServiceIndex
|
|
INTEGER,
|
|
genEquipServicesCetConfigServiceToInstanceInstanceIndex
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipServicesCetConfigServiceToInstanceServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Service ID."
|
|
::= { genEquipServicesCetConfigServiceToInstanceEntry 1 }
|
|
|
|
genEquipServicesCetConfigServiceToInstanceInstanceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"xSTP Instance ID for the specific Service."
|
|
::= { genEquipServicesCetConfigServiceToInstanceEntry 2 }
|
|
|
|
-- IF Manager if-manager-configuration-table
|
|
genEquipInterfacesIfManager OBJECT IDENTIFIER ::= {genEquipInterfaces 9}
|
|
|
|
genEquipInterfacesIfManagerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesIfManagerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains a list of configuration information about the user managed interfaces."
|
|
::= { genEquipInterfacesIfManager 1 }
|
|
|
|
genEquipInterfacesIfManagerEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesIfManagerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table entry contains a list of configuration information about the user managed interfaces."
|
|
INDEX { ifIndex }
|
|
::= { genEquipInterfacesIfManagerTable 1 }
|
|
|
|
GenEquipInterfacesIfManagerEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesIfManagerifCascading
|
|
IfMgrTrueFalse,
|
|
genEquipInterfacesIfManagerifSecondaryOperStatus
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesIfManagerifCascading OBJECT-TYPE
|
|
SYNTAX IfMgrTrueFalse
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cascading state of the interface."
|
|
::= { genEquipInterfacesIfManagerEntry 1 }
|
|
|
|
genEquipInterfacesIfManagerifSecondaryOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An additional information about the current operational state of the interface."
|
|
::= { genEquipInterfacesIfManagerEntry 2 }
|
|
|
|
--
|
|
-- IF Cascading if-physical-cascading-port-config-table
|
|
genEquipInterfacesCascading OBJECT IDENTIFIER ::= {genEquipInterfaces 10}
|
|
|
|
genEquipInterfacesCascadingConfigurationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesCascadingConfigurationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Cascading Port Configuration Table."
|
|
::= { genEquipInterfacesCascading 1 }
|
|
|
|
genEquipInterfacesCascadingConfigurationEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesCascadingConfigurationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Cascading Port Configuration Table entry."
|
|
INDEX { genEquipInterfacesCascadingConfigurationIfindex }
|
|
::= { genEquipInterfacesCascadingConfigurationTable 1 }
|
|
|
|
GenEquipInterfacesCascadingConfigurationEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesCascadingConfigurationIfindex
|
|
INTEGER,
|
|
genEquipInterfacesCascadingConfigurationCascading
|
|
MibTrueFalse
|
|
}
|
|
|
|
|
|
genEquipInterfacesCascadingConfigurationIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Cascading port if-index table key."
|
|
::= { genEquipInterfacesCascadingConfigurationEntry 1 }
|
|
|
|
genEquipInterfacesCascadingConfigurationCascading OBJECT-TYPE
|
|
SYNTAX MibTrueFalse
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates if the port is cascading or not."
|
|
::= { genEquipInterfacesCascadingConfigurationEntry 2 }
|
|
|
|
|
|
-- STM-1/OC-3
|
|
genEquipInterfacesStm1Rst OBJECT IDENTIFIER ::= {genEquipInterfaces 11}
|
|
|
|
-- stm1-config-table
|
|
genEquipInterfacesStm1RstConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"STM-1/OC-3 configuration table."
|
|
::= { genEquipInterfacesStm1Rst 1 }
|
|
|
|
genEquipInterfacesStm1RstConfigEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesStm1RstConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"STM-1/OC-3 configuration table entry."
|
|
INDEX { genEquipInterfacesStm1RstConfigIfindex }
|
|
::= { genEquipInterfacesStm1RstConfigTable 1 }
|
|
|
|
GenEquipInterfacesStm1RstConfigEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesStm1RstConfigIfindex
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstConfigPort
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstConfigAdmin
|
|
EnableDisableSMI2,
|
|
genEquipInterfacesStm1RstConfigMute
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesStm1RstConfigIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface index of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstConfigEntry 1 }
|
|
|
|
genEquipInterfacesStm1RstConfigPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstConfigEntry 2 }
|
|
|
|
genEquipInterfacesStm1RstConfigAdmin OBJECT-TYPE
|
|
SYNTAX EnableDisableSMI2
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Admin Sate of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstConfigEntry 3 }
|
|
|
|
genEquipInterfacesStm1RstConfigMute OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unmute(0),
|
|
mute(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The SFP Mute config of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstConfigEntry 4 }
|
|
|
|
|
|
--
|
|
-- stm1-status-table
|
|
genEquipInterfacesStm1RstStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"STM-1/OC-3 status table."
|
|
::= { genEquipInterfacesStm1Rst 2 }
|
|
|
|
genEquipInterfacesStm1RstStatusEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesStm1RstStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"STM-1/OC-3 status table entry."
|
|
INDEX { genEquipInterfacesStm1RstStatusIfindex }
|
|
::= { genEquipInterfacesStm1RstStatusTable 1 }
|
|
|
|
GenEquipInterfacesStm1RstStatusEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesStm1RstStatusIfindex
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstStatusLoopbackTimer
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstStatusLoopbackType
|
|
RSTLoopbackType,
|
|
genEquipInterfacesStm1RstStatusOperstatus
|
|
DownUp
|
|
}
|
|
|
|
|
|
genEquipInterfacesStm1RstStatusIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface index of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstStatusEntry 1 }
|
|
|
|
genEquipInterfacesStm1RstStatusLoopbackTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstStatusEntry 2 }
|
|
|
|
genEquipInterfacesStm1RstStatusLoopbackType OBJECT-TYPE
|
|
SYNTAX RSTLoopbackType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The loopback type of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstStatusEntry 3 }
|
|
|
|
genEquipInterfacesStm1RstStatusOperstatus OBJECT-TYPE
|
|
SYNTAX DownUp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The operational status of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstStatusEntry 4 }
|
|
|
|
-- stm1-status-table only prbs
|
|
genEquipInterfacesStm1RstPrbsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstPrbsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"STM-1/OC-3 status table."
|
|
::= { genEquipInterfacesStm1Rst 3 }
|
|
|
|
genEquipInterfacesStm1RstPrbsEntry OBJECT-TYPE
|
|
SYNTAX GenEquipInterfacesStm1RstPrbsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"STM-1/OC-3 status table entry."
|
|
INDEX { genEquipInterfacesStm1RstStatusIfindex }
|
|
::= { genEquipInterfacesStm1RstPrbsTable 1 }
|
|
|
|
GenEquipInterfacesStm1RstPrbsEntry ::=
|
|
SEQUENCE {
|
|
genEquipInterfacesStm1RstPrbsCheckLineClear
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsCheckLine
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsCheckLineInv
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsCheckLineStatus
|
|
DisplayString,
|
|
genEquipInterfacesStm1RstPrbsCheckLineTotErr
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsCheckRadioClear
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsCheckRadio
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsCheckRadioInv
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsCheckRadioStatus
|
|
DisplayString,
|
|
genEquipInterfacesStm1RstPrbsCheckRadioTotErr
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsGenLine
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsGenLineErrIns
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsGenLineInv
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsGenRadio
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsGenRadioErrIns
|
|
INTEGER,
|
|
genEquipInterfacesStm1RstPrbsGenRadioInv
|
|
INTEGER
|
|
}
|
|
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckLineClear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Line Direction Reset counter of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 1 }
|
|
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckLine OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Line Direction of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 2 }
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckLineInv OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Line Direction of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 3 }
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckLineStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Line Direction Status of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 4 }
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckLineTotErr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Line Direction Total Error counter of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 5 }
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckRadioClear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Radio Direction Reset counter of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 6 }
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckRadio OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Radio Direction of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 7 }
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckRadioInv OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Radio Direction of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 8 }
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckRadioStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Radio Direction Status of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 9 }
|
|
|
|
genEquipInterfacesStm1RstPrbsCheckRadioTotErr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Checker Radio Direction Total Error counter of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 10 }
|
|
|
|
genEquipInterfacesStm1RstPrbsGenLine OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Generator Line Direction of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 11 }
|
|
|
|
genEquipInterfacesStm1RstPrbsGenLineErrIns OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Generator Line Direction Error Insert of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 12 }
|
|
|
|
genEquipInterfacesStm1RstPrbsGenLineInv OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Generator Line Direction of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 13 }
|
|
|
|
genEquipInterfacesStm1RstPrbsGenRadio OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Generator Radio Direction of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 14 }
|
|
|
|
genEquipInterfacesStm1RstPrbsGenRadioErrIns OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Generator Radio Direction Error Insert of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 15 }
|
|
|
|
genEquipInterfacesStm1RstPrbsGenRadioInv OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PRBS Generator Radio Direction of the STM-1/OC-3 interface."
|
|
::= { genEquipInterfacesStm1RstPrbsEntry 16 }
|
|
|
|
|
|
-- ###########################################################
|
|
-- Traps Section
|
|
-- ###########################################################
|
|
|
|
alarmTrap TRAP-TYPE
|
|
ENTERPRISE microwave-radio
|
|
VARIABLES { genEquipCurrentAlarmCounter,
|
|
genEquipCurrentAlarmRaisedTimeT,
|
|
genEquipCurrentAlarmId,
|
|
genEquipCurrentAlarmSlotId,
|
|
genEquipCurrentAlarmInstance,
|
|
genEquipCurrentAlarmSeverity,
|
|
genEquipCurrentAlarmIfIndex,
|
|
genEquipCurrentAlarmModule,
|
|
genEquipCurrentAlarmDesc,
|
|
genEquipMostSevereAlarm,
|
|
genEquipNetworkAgentIp,
|
|
genEquipCurrentAlarmState,
|
|
genEquipTrapCfgMgrCLLI
|
|
}
|
|
DESCRIPTION "Alarm network trap"
|
|
::= 1001
|
|
|
|
eventTrap TRAP-TYPE
|
|
ENTERPRISE microwave-radio
|
|
VARIABLES { genEquipCurrentAlarmCounter,
|
|
genEquipCurrentAlarmRaisedTimeT,
|
|
genEquipCurrentAlarmId,
|
|
genEquipCurrentAlarmSlotId,
|
|
genEquipCurrentAlarmInstance,
|
|
genEquipCurrentAlarmSeverity,
|
|
genEquipCurrentAlarmIfIndex,
|
|
genEquipCurrentAlarmModule,
|
|
genEquipCurrentAlarmDesc,
|
|
genEquipMostSevereAlarm,
|
|
genEquipNetworkAgentIp,
|
|
genEquipTrapCfgMgrCLLI
|
|
}
|
|
DESCRIPTION "Event network trap"
|
|
::= 1002
|
|
|
|
|
|
heartbeatTrap TRAP-TYPE
|
|
ENTERPRISE microwave-radio
|
|
VARIABLES { genEquipTrapCfgMgrCLLI
|
|
}
|
|
DESCRIPTION "The heartbeat trap, sent once per heartbeat period"
|
|
::= 1003
|
|
|
|
eventTrapSTP TRAP-TYPE -- STP, RSTP, Ring RSTP trap
|
|
ENTERPRISE microwave-radio
|
|
VARIABLES { genEquipCurrentAlarmCounter, -- general event parameters
|
|
genEquipCurrentAlarmRaisedTimeT,
|
|
genEquipCurrentAlarmId,
|
|
genEquipCurrentAlarmSlotId,
|
|
genEquipCurrentAlarmInstance,
|
|
genEquipCurrentAlarmSeverity,
|
|
genEquipCurrentAlarmIfIndex,
|
|
genEquipCurrentAlarmModule,
|
|
genEquipCurrentAlarmDesc, -- This field shows show the descriptions of the event
|
|
-- "STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
|
|
-- Role: <Role>, State: <state>"
|
|
genEquipMostSevereAlarm,
|
|
genEquipNetworkAgentIp,
|
|
genEquipTrapCfgMgrCLLI,
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsRole, -- event trigger
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsState, -- event trigger
|
|
genEquipEthernetSwitchXSTPBridgeRole,
|
|
genEquipEthernetSwitchXSTPRootID -- RSTP parameters
|
|
}
|
|
DESCRIPTION "STP trap.
|
|
(1) The description field shows show the descriptions of the event
|
|
STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
|
|
Role: <Role>, State: <state>
|
|
In addition to the general trap event var-binds, this trap also adds the STP parameters."
|
|
|
|
::= 1004
|
|
|
|
genTraps OBJECT IDENTIFIER ::= { microwave-radio 11 }
|
|
generalV3Trap NOTIFICATION-TYPE
|
|
OBJECTS { genEquipCurrentAlarmCounter,
|
|
genEquipCurrentAlarmRaisedTimeT,
|
|
genEquipCurrentAlarmId,
|
|
genEquipCurrentAlarmSlotId,
|
|
genEquipCurrentAlarmInstance,
|
|
genEquipCurrentAlarmSeverity,
|
|
genEquipCurrentAlarmIfIndex,
|
|
genEquipCurrentAlarmModule,
|
|
genEquipCurrentAlarmDesc,
|
|
genEquipMostSevereAlarm,
|
|
genEquipNetworkAgentIp,
|
|
genEquipCurrentAlarmState,
|
|
genEquipTrapCfgMgrCLLI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "General network V3 trap"
|
|
::= { genTraps 1 }
|
|
|
|
eventV3Trap NOTIFICATION-TYPE
|
|
OBJECTS { genEquipCurrentAlarmCounter,
|
|
genEquipCurrentAlarmRaisedTimeT,
|
|
genEquipCurrentAlarmId,
|
|
genEquipCurrentAlarmSlotId,
|
|
genEquipCurrentAlarmInstance,
|
|
genEquipCurrentAlarmSeverity,
|
|
genEquipCurrentAlarmIfIndex,
|
|
genEquipCurrentAlarmModule,
|
|
genEquipCurrentAlarmDesc,
|
|
genEquipMostSevereAlarm,
|
|
genEquipNetworkAgentIp,
|
|
genEquipTrapCfgMgrCLLI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Event network V3 trap"
|
|
::= { genTraps 2 }
|
|
|
|
heartbeatV3Trap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
genEquipTrapCfgMgrCLLI
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period"
|
|
::= { genTraps 3 }
|
|
|
|
eventv3TrapSTP NOTIFICATION-TYPE -- STP, RSTP, Ring RSTP trap
|
|
OBJECTS { genEquipCurrentAlarmCounter, -- general event parameters
|
|
genEquipCurrentAlarmRaisedTimeT,
|
|
genEquipCurrentAlarmId,
|
|
genEquipCurrentAlarmSlotId,
|
|
genEquipCurrentAlarmInstance,
|
|
genEquipCurrentAlarmSeverity,
|
|
genEquipCurrentAlarmIfIndex,
|
|
genEquipCurrentAlarmModule,
|
|
genEquipCurrentAlarmDesc, -- This field shows show the descriptions of the event
|
|
-- "STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
|
|
-- Role: <Role>, State: <state>,
|
|
genEquipMostSevereAlarm,
|
|
genEquipNetworkAgentIp,
|
|
genEquipTrapCfgMgrCLLI,
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsRole, -- event trigger
|
|
genEquipEthernetSwitchXSTPParamsEthernetPortsState, -- event trigger
|
|
genEquipEthernetSwitchXSTPBridgeRole,
|
|
genEquipEthernetSwitchXSTPRootID -- RSTP parameters
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "STP trap.
|
|
(1) The description field shows show the descriptions of the event
|
|
STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
|
|
Role: <Role>, State: <state>,
|
|
In addition to the general trap event var-binds, this trap also adds the STP parameters."
|
|
::= { genTraps 4 }
|
|
|
|
|
|
|
|
-- ###########################################################
|
|
-- NG Traps Section
|
|
-- ###########################################################
|
|
|
|
alarmTrap TRAP-TYPE
|
|
ENTERPRISE microwave-radio
|
|
VARIABLES { genEquipCurrentAlarmCounter,
|
|
genEquipCurrentAlarmRaisedTimeT,
|
|
genEquipNetworkAgentIp,
|
|
genEquipCurrentAlarmId,
|
|
genEquipCurrentAlarmDesc,
|
|
genEquipCurrentAlarmIfIndex,
|
|
genEquipCurrentAlarmInstance,
|
|
genEquipCurrentAlarmSeverity,
|
|
genEquipCurrentAlarmState,
|
|
genEquipCurrentAlarmUserText,
|
|
genEquipTrapCfgMgrCLLI,
|
|
genEquipNetworkAgentIpV6
|
|
}
|
|
DESCRIPTION "NG Alarm network trap"
|
|
::= 2000
|
|
|
|
heartbeatTrap TRAP-TYPE
|
|
ENTERPRISE microwave-radio
|
|
VARIABLES { genEquipCurrentAlarmCounter,
|
|
genEquipTrapCfgMgrCLLI
|
|
}
|
|
DESCRIPTION "NG heartbeat trap, sent once per heartbeat period"
|
|
::= 2001
|
|
|
|
|
|
-- ###########################################################
|
|
-- NG Notificatin Section (V2 V3)
|
|
-- ###########################################################
|
|
|
|
generalNGV3Trap NOTIFICATION-TYPE
|
|
OBJECTS { genEquipCurrentAlarmCounter,
|
|
genEquipCurrentAlarmRaisedTimeT,
|
|
genEquipNetworkAgentIp,
|
|
genEquipCurrentAlarmId,
|
|
genEquipCurrentAlarmDesc,
|
|
genEquipCurrentAlarmIfIndex,
|
|
genEquipCurrentAlarmInstance,
|
|
genEquipCurrentAlarmSeverity,
|
|
genEquipCurrentAlarmState,
|
|
genEquipCurrentAlarmUserText,
|
|
genEquipTrapCfgMgrCLLI,
|
|
genEquipNetworkAgentIpV6
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "NG General network V3 trap"
|
|
::= { genTraps 2000 }
|
|
|
|
heartbeatNGV3Trap NOTIFICATION-TYPE
|
|
OBJECTS { genEquipCurrentAlarmCounter,
|
|
genEquipTrapCfgMgrCLLI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "NG Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period"
|
|
::= { genTraps 2001 }
|
|
|
|
END
|