Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
242 lines
No EOL
6.3 KiB
Text
242 lines
No EOL
6.3 KiB
Text
-- SmartOptics Enterprise Specific Port MIB.
|
|
--
|
|
-- Copyright (c) 2014, SmartOptics
|
|
-- All rights reserved
|
|
--
|
|
|
|
MSERIES-PORT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
PortType, PortStatus, PortMode
|
|
FROM MSERIES-TC
|
|
mseries
|
|
FROM MSERIES-MIB;
|
|
|
|
smartPort MODULE-IDENTITY
|
|
LAST-UPDATED "201402121344Z"
|
|
ORGANIZATION "SmartOptics"
|
|
CONTACT-INFO "http://www.smartoptics.com"
|
|
DESCRIPTION
|
|
"This is the enterprise specific Port MIB for SmartOptics M-Series."
|
|
REVISION "201402121344Z"
|
|
DESCRIPTION
|
|
"The initial revision of the MSERIES Port MIB."
|
|
|
|
::= { mseries 3 }
|
|
|
|
smartPortObjects OBJECT IDENTIFIER
|
|
::= { smartPort 1 }
|
|
|
|
smartPortGeneral OBJECT IDENTIFIER
|
|
::= { smartPortObjects 1}
|
|
|
|
smartPortList OBJECT IDENTIFIER
|
|
::= { smartPortObjects 2}
|
|
|
|
smartPortMIBConformance OBJECT IDENTIFIER
|
|
::= { smartPort 2}
|
|
|
|
smartPortGroups OBJECT IDENTIFIER
|
|
::= { smartPortMIBConformance 1}
|
|
|
|
smartPortCompliances OBJECT IDENTIFIER
|
|
::= { smartPortMIBConformance 2}
|
|
|
|
|
|
--
|
|
-- General
|
|
--
|
|
|
|
--
|
|
-- The Port Table
|
|
--
|
|
|
|
smartPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmartPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A port table."
|
|
::= { smartPortList 1 }
|
|
|
|
smartPortEntry OBJECT-TYPE
|
|
SYNTAX SmartPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the port list."
|
|
INDEX { smartPortIndex }
|
|
::= { smartPortTable 1 }
|
|
|
|
SmartPortEntry ::=
|
|
SEQUENCE {
|
|
smartPortIndex Unsigned32,
|
|
smartPortName DisplayString,
|
|
smartPortAlias DisplayString,
|
|
smartPortType PortType,
|
|
smartPortPower Integer32,
|
|
smartPortStatus PortStatus,
|
|
smartPortMode PortMode,
|
|
smartPortHighPowerAlarmThreshold Integer32,
|
|
smartPortLowPowerAlarmThreshold Integer32
|
|
}
|
|
|
|
smartPortIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique index for each port that corresponds to the index in the interface table"
|
|
::= { smartPortEntry 1 }
|
|
|
|
smartPortName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the port."
|
|
::= { smartPortEntry 2 }
|
|
|
|
smartPortAlias OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User configurable Port Alias for the port.
|
|
|
|
Not writeable in SmartOS v2.3"
|
|
::= { smartPortEntry 3 }
|
|
|
|
smartPortType OBJECT-TYPE
|
|
SYNTAX PortType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port.
|
|
|
|
rx(1) - Receiving port.
|
|
|
|
tx(2) - Transmitting port.
|
|
|
|
biDi(3) - Bidirectional port."
|
|
::= { smartPortEntry 4 }
|
|
|
|
smartPortPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power level in units of 0.1 dBm."
|
|
::= { smartPortEntry 5 }
|
|
|
|
smartPortStatus OBJECT-TYPE
|
|
SYNTAX PortStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state for a port.
|
|
|
|
idle(1) - The port is not activated
|
|
|
|
down(2) - The port traffic is lost.
|
|
|
|
up(3) - There is traffic on the port.
|
|
|
|
high(4) - The port got to high power.
|
|
|
|
low(5) - The port got to low power.
|
|
|
|
eyeSafety(6) - The Line Tx port is in Eye Safety Mode.
|
|
This means that either the connector on the
|
|
Line Tx port is not inserted or that you have
|
|
too strong reflection from the line fiber.
|
|
|
|
cd(7) - Channel detected.
|
|
|
|
ncd(8) - No channel detected."
|
|
::= { smartPortEntry 6 }
|
|
|
|
smartPortMode OBJECT-TYPE
|
|
SYNTAX PortMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mode of the Port.
|
|
|
|
normal (1) - The port is active. No alarms
|
|
are beeing suppressed.
|
|
|
|
service (2) . The port is in service mode
|
|
and alarms are beeing suppressed. When service
|
|
is ready smartPortMode should be set to
|
|
'normal' again.
|
|
|
|
Not writeable in SmartOS v2.3"
|
|
::= { smartPortEntry 7 }
|
|
|
|
smartPortHighPowerAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for the High Power alarm.
|
|
|
|
Not writeable in SmartOS v2.3"
|
|
::= { smartPortEntry 8 }
|
|
|
|
smartPortLowPowerAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for the Low Power alarm.
|
|
|
|
Not writeable in SmartOS v2.3"
|
|
::= { smartPortEntry 9 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Conformance
|
|
-- ----------------------------------------------------
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Object and event groups
|
|
-- ----------------------------------------------------
|
|
|
|
smartPortListGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
smartPortIndex,
|
|
smartPortName,
|
|
smartPortAlias,
|
|
smartPortType,
|
|
smartPortPower,
|
|
smartPortStatus,
|
|
smartPortMode,
|
|
smartPortHighPowerAlarmThreshold,
|
|
smartPortLowPowerAlarmThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port List MIB objects v1."
|
|
::= { smartPortGroups 1 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Compliance
|
|
-- ----------------------------------------------------
|
|
|
|
smartPortBasicComplV1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the port MIB V1."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
smartPortListGroupV1 }
|
|
::= { smartPortCompliances 1 }
|
|
|
|
END |