Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1745 lines
63 KiB
Text
1745 lines
63 KiB
Text
|
|
-- *****************************************************************************
|
|
-- Juniper-PIM-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- Protocol Independent Multicast (PIM) MIB
|
|
--
|
|
-- Copyright (c) 2001 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002 Juniper Networks, Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-PIM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TruthValue, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
pimInterfaceIfIndex, pimRPSetComponent, pimRPSetGroupAddress,
|
|
pimRPSetGroupMask, pimRPSetAddress
|
|
FROM PIM-MIB
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
juniMibs
|
|
FROM Juniper-MIBs;
|
|
|
|
juniPimMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
Email: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"The enterprise MIB module for management of PIM routers."
|
|
-- Revision History
|
|
REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Replaced Unisphere names with Juniper names."
|
|
REVISION "200103191537Z" -- 19-Mar-01 10:37 AM EST - JUNOSe 3.0
|
|
DESCRIPTION
|
|
"Initial enterprise version."
|
|
::= { juniMibs 43 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Textual conventions
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
JuniPimType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used do identify Sparse mode and Dense mode PIM
|
|
protocol."
|
|
SYNTAX INTEGER {
|
|
invalid(0), -- not valid value
|
|
dense(1), -- dense mode PIM
|
|
sparse(2), -- sparse mode PIM
|
|
sparseAndDense(3) } -- both sparse and dense mode PIM
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimMIBObjects OBJECT IDENTIFIER ::= { juniPimMIB 1 }
|
|
juniPimTraps OBJECT IDENTIFIER ::= { juniPimMIBObjects 0 }
|
|
juniPimGlobal OBJECT IDENTIFIER ::= { juniPimMIBObjects 1 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Pim General Group
|
|
--
|
|
-- NOTE: RowStatus rowStatus. This needs to go into virtual-router
|
|
-- MIB table so that we can create/destroy PIM
|
|
--
|
|
-- PimPktStats: these actually augment the general group of standard MIB
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimNumHelloRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Hellos received by PIM on this router."
|
|
::= { juniPimGlobal 1 }
|
|
|
|
juniPimNumJoinPruneRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of JoinPrunes received by PIM on this router."
|
|
::= { juniPimGlobal 2 }
|
|
|
|
juniPimNumAssertRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Asserts received by PIM on this router."
|
|
::= { juniPimGlobal 3 }
|
|
|
|
juniPimNumGraftRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Grafts received by PIM on this router."
|
|
::= { juniPimGlobal 4 }
|
|
|
|
juniPimNumGraftAckRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Graft Acks received by PIM on this router."
|
|
::= { juniPimGlobal 5 }
|
|
|
|
juniPimNumHelloSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Hellos sent by PIM on this router."
|
|
::= { juniPimGlobal 6 }
|
|
|
|
juniPimNumJoinPruneSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of JoinPrunes sent by PIM on this router."
|
|
::= { juniPimGlobal 7 }
|
|
|
|
juniPimNumAssertSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Asserts sent by PIM on this router."
|
|
::= { juniPimGlobal 8 }
|
|
|
|
juniPimNumGraftSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Grafts sent by PIM on this router."
|
|
::= { juniPimGlobal 9 }
|
|
|
|
juniPimNumGraftAckSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Graft Acks sent by PIM on this router."
|
|
::= { juniPimGlobal 10 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Pim Interface Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing enterprise specific information on a
|
|
subset of the rows of the pimInterfaceTable defined in the standard PIM
|
|
MIB."
|
|
::= { juniPimGlobal 11 }
|
|
|
|
juniPimInterfaceEntry OBJECT-TYPE
|
|
SYNTAX JuniPimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimInterfaceTable. There is one
|
|
entry per entry in the pimInterfaceTable."
|
|
INDEX { pimInterfaceIfIndex }
|
|
::= { juniPimInterfaceTable 1 }
|
|
|
|
JuniPimInterfaceEntry ::= SEQUENCE {
|
|
juniPimIntfNumHelloRcvd Integer32,
|
|
juniPimIntfNumJoinPruneRcvd Integer32,
|
|
juniPimIntfNumAssertRcvd Integer32,
|
|
juniPimIntfNumGraftRcvd Integer32,
|
|
juniPimIntfNumGraftAckRcvd Integer32,
|
|
juniPimIntfNumHelloSent Integer32,
|
|
juniPimIntfNumJoinPruneSent Integer32,
|
|
juniPimIntfNumAssertSent Integer32,
|
|
juniPimIntfNumGraftSent Integer32,
|
|
juniPimIntfNumGraftAckSent Integer32,
|
|
juniPimIntfVersion INTEGER,
|
|
juniPimIntfNumNbrs Integer32 }
|
|
|
|
juniPimIntfNumHelloRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Hellos received by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 1 }
|
|
|
|
juniPimIntfNumJoinPruneRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of JoinPrunes received by PIM on this interface. It can
|
|
only be cleared to 0 when doing set. Setting this also sets counters
|
|
for other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 2 }
|
|
|
|
juniPimIntfNumAssertRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Asserts received by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 3 }
|
|
|
|
juniPimIntfNumGraftRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Grafts received by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 4 }
|
|
|
|
juniPimIntfNumGraftAckRcvd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Graft Acks received by PIM on this interface. It can
|
|
only be cleared to 0 when doing set. Setting this also sets counters
|
|
for other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 5 }
|
|
|
|
juniPimIntfNumHelloSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Hellos sent by PIM on this interface. It can only be
|
|
cleared to 0 when doing set. Setting this also sets counters for other
|
|
types of packets to 0."
|
|
::= { juniPimInterfaceEntry 6 }
|
|
|
|
juniPimIntfNumJoinPruneSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of JoinPrunes sent by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 7 }
|
|
|
|
juniPimIntfNumAssertSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Asserts sent by PIM on this interface. It can only be
|
|
cleared to 0 when doing set. Setting this also sets counters for other
|
|
types of packets to 0."
|
|
::= { juniPimInterfaceEntry 8 }
|
|
|
|
juniPimIntfNumGraftSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Grafts sent by PIM on this interface. It can only be
|
|
cleared to 0 when doing set. Setting this also sets counters for other
|
|
types of packets to 0."
|
|
::= { juniPimInterfaceEntry 9 }
|
|
|
|
juniPimIntfNumGraftAckSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Graft Acks sent by PIM on this interface. It can only
|
|
be cleared to 0 when doing set. Setting this also sets counters for
|
|
other types of packets to 0."
|
|
::= { juniPimInterfaceEntry 10 }
|
|
|
|
juniPimIntfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of PIM running on this interface."
|
|
::= { juniPimInterfaceEntry 11 }
|
|
|
|
juniPimIntfNumNbrs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of PIM neighbors detected on this interface."
|
|
::= { juniPimInterfaceEntry 12 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Multicast Route Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimMRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM multicast routing information
|
|
describing its <*, *, RP>/ <*, G>/ <S, G> states."
|
|
::= { juniPimGlobal 12 }
|
|
|
|
juniPimMRouteEntry OBJECT-TYPE
|
|
SYNTAX JuniPimMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimMRouteTable."
|
|
INDEX { juniPimMRouteGroup,
|
|
juniPimMRouteSource,
|
|
juniPimMRouteSourceMask,
|
|
juniPimMRouteRPAddress }
|
|
::= { juniPimMRouteTable 1 }
|
|
|
|
JuniPimMRouteEntry ::= SEQUENCE {
|
|
juniPimMRouteGroup IpAddress,
|
|
juniPimMRouteSource IpAddress,
|
|
juniPimMRouteSourceMask IpAddress,
|
|
juniPimMRouteRPAddress IpAddress,
|
|
juniPimMRouteUpstreamAssertTimer TimeTicks,
|
|
juniPimMRouteAssertMetric Integer32,
|
|
juniPimMRouteAssertPref Integer32,
|
|
juniPimMRouteAssertRPTBit TruthValue,
|
|
juniPimMRouteBits BITS,
|
|
juniPimMRouteRPAddrInUse IpAddress,
|
|
juniPimMRouteUpstreamNbr IpAddress,
|
|
juniPimMRouteIifAddr IpAddress,
|
|
juniPimMRouteIsWaitingToSwitchToSPT TruthValue,
|
|
juniPimMRouteEntryExpiryTimer TimeTicks,
|
|
juniPimMRouteSenderDRAddr IpAddress,
|
|
juniPimMRouteRouteAddr IpAddress,
|
|
juniPimMRouteRouteMask IpAddress,
|
|
juniPimMRouteGRPAddr IpAddress,
|
|
juniPimMRouteGRPMask IpAddress,
|
|
juniPimMRouteOtherProtoOifJoinTypeAll TruthValue,
|
|
juniPimMRouteOtherProtoOifJoinTypeG TruthValue,
|
|
juniPimMRouteOtherProtoOifJoinTypeSG TruthValue,
|
|
juniPimMRoutePimType JuniPimType }
|
|
|
|
juniPimMRouteGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address. Specified as 224.0.0.0 for <*, *, RP> entries."
|
|
::= { juniPimMRouteEntry 1 }
|
|
|
|
juniPimMRouteSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G>
|
|
entries."
|
|
::= { juniPimMRouteEntry 2 }
|
|
|
|
juniPimMRouteSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address mask. Specified as 255.255.255.255 for <S, G>
|
|
entries and 0.0.0.0 for <*, *, RP> and <*, G> entries."
|
|
::= { juniPimMRouteEntry 3 }
|
|
|
|
juniPimMRouteRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G>
|
|
and <*, G> entries."
|
|
::= { juniPimMRouteEntry 4 }
|
|
|
|
juniPimMRouteUpstreamAssertTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time remaining before the router changes its upstream neighbor back
|
|
to its RPF neighbor. This timer is called the Assert timer in the PIM
|
|
Sparse and Dense mode specification. A value of 0 indicates that no
|
|
Assert has changed the upstream neighbor away from the RPF neighbor."
|
|
::= { juniPimMRouteEntry 5 }
|
|
|
|
juniPimMRouteAssertMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric advertised by the assert winner on the upstream interface,
|
|
or 0 if no such assert is in received."
|
|
::= { juniPimMRouteEntry 6 }
|
|
|
|
juniPimMRouteAssertPref OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference advertised by the assert winner on the upstream
|
|
interface, or 0 if no such assert is in effect."
|
|
::= { juniPimMRouteEntry 7 }
|
|
|
|
juniPimMRouteAssertRPTBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the RPT-bit advertised by the assert winner on the
|
|
upstream interface, or false if no such assert is in effect."
|
|
::= { juniPimMRouteEntry 8 }
|
|
|
|
juniPimMRouteBits OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
rpt(0),
|
|
spt(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes whether the entry is on shared tree (RPT) or
|
|
shortest path tree (SPT)."
|
|
::= { juniPimMRouteEntry 9 }
|
|
|
|
juniPimMRouteRPAddrInUse OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries.
|
|
Set to 0.0.0.0 for <S, G> entries on shortest path tree."
|
|
::= { juniPimMRouteEntry 10 }
|
|
|
|
juniPimMRouteUpstreamNbr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of upstream neighbor being used for the entry. Its set to
|
|
0.0.0.0 if the router is directly attached to source on one of its
|
|
interface. "
|
|
::= { juniPimMRouteEntry 11 }
|
|
|
|
juniPimMRouteIifAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of incoming interface for this entry."
|
|
::= { juniPimMRouteEntry 12 }
|
|
|
|
juniPimMRouteIsWaitingToSwitchToSPT OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This object describes whether the entry is still waiting to switch
|
|
completely to shortest path tree in case of <S, G> entries. It waits to
|
|
do this till it receives first packet from incoming interface towards
|
|
shortest path tree."
|
|
::= { juniPimMRouteEntry 13 }
|
|
|
|
juniPimMRouteEntryExpiryTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time after which the entry timer expires for this entry. Set to 0
|
|
if entry timer is not active."
|
|
::= { juniPimMRouteEntry 14 }
|
|
|
|
juniPimMRouteSenderDRAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the designated router on the sender's subnet in case of
|
|
<S, G> entries. The sender designated router register encapsulates data
|
|
to RP. Set to 0.0.0.0 for <*, G> and <*, *, RP> entries."
|
|
::= { juniPimMRouteEntry 15 }
|
|
|
|
juniPimMRouteRouteAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the route being used to do RPF check for this entry. It
|
|
is set to 0.0.0.0 (with juniPimMRouteRouteMask set to 255.255.255.255)
|
|
if there is no route available."
|
|
::= { juniPimMRouteEntry 16 }
|
|
|
|
juniPimMRouteRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the route being used to do RPF check for this entry. It is
|
|
set to 255.255.255.255 (with juniPimMRouteRoute set to 0.0.0.0) if there
|
|
is no route available."
|
|
::= { juniPimMRouteEntry 17 }
|
|
|
|
juniPimMRouteGRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the group-to-RP mapping being used to get the RP for
|
|
this entry. It is set to 0.0.0.0 (with juniPimMRouteGRPMask set to
|
|
0.0.0.0) if there is no group-to-RP mapping available or if entry is <*,
|
|
*, RP>."
|
|
::= { juniPimMRouteEntry 18 }
|
|
|
|
juniPimMRouteGRPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the group-to-RP mapping being used to get the RP for this
|
|
entry. It is set to 255.255.255.255 (with juniPimMRouteGRPAddr set to
|
|
0.0.0.0) if there is no group-to-RP mapping available or if entry is <*,
|
|
*, RP>."
|
|
::= { juniPimMRouteEntry 19 }
|
|
|
|
juniPimMRouteOtherProtoOifJoinTypeAll OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if some other multicast protocol is also
|
|
interested in receiving data for this entry as a result of its interest
|
|
in receiving all data. This will be particularly true for dense mode
|
|
protocols which would want all data (<*, *>) from PIM sparse mode
|
|
protocol."
|
|
::= { juniPimMRouteEntry 20 }
|
|
|
|
juniPimMRouteOtherProtoOifJoinTypeG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if some other multicast protocol is also
|
|
interested in receiving data for this entry as a result of its interest
|
|
in receiving data for a given group. This will be particularly true for
|
|
IGMP which would want data for a given group (<*, G>) from PIM
|
|
protocol."
|
|
::= { juniPimMRouteEntry 21 }
|
|
|
|
juniPimMRouteOtherProtoOifJoinTypeSG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if some other multicast protocol is also
|
|
interested in receiving data for this entry as a result of its interest
|
|
in receiving data for a given <source, group>. This will be
|
|
particularly true for IGMPv3 which would want data for a given <source,
|
|
group (<S, G>) from PIM sparse-mode protocol."
|
|
::= { juniPimMRouteEntry 22 }
|
|
|
|
juniPimMRoutePimType OBJECT-TYPE
|
|
SYNTAX JuniPimType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if the owner of this entry is Sparse mode or
|
|
Dense mode PIM. Owner is usually determined by the protocol running on
|
|
the incoming interface of the entry. In case sparse-dense mode PIM is
|
|
running on the incoming interface, sparse-mode is the owner if RP for
|
|
the group is known, else dense mode is the owner."
|
|
::= { juniPimMRouteEntry 23 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Next Hop Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimMRouteNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimMRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM multicast routing information
|
|
describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces."
|
|
::= { juniPimGlobal 13 }
|
|
|
|
juniPimMRouteNextHopEntry OBJECT-TYPE
|
|
SYNTAX JuniPimMRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimMRouteNextHopTable."
|
|
INDEX { juniPimMRouteNextHopGroupAddr,
|
|
juniPimMRouteNextHopSrcAddr,
|
|
juniPimMRouteNextHopSrcMask,
|
|
juniPimMRouteNextHopRPAddr,
|
|
juniPimMRouteNextHopIfId,
|
|
juniPimMRouteNextHopAddress }
|
|
::= { juniPimMRouteNextHopTable 1 }
|
|
|
|
JuniPimMRouteNextHopEntry ::= SEQUENCE {
|
|
juniPimMRouteNextHopGroupAddr IpAddress,
|
|
juniPimMRouteNextHopSrcAddr IpAddress,
|
|
juniPimMRouteNextHopSrcMask IpAddress,
|
|
juniPimMRouteNextHopRPAddr IpAddress,
|
|
juniPimMRouteNextHopIfId InterfaceIndex,
|
|
juniPimMRouteNextHopAddress IpAddress,
|
|
juniPimMRouteNextHopPruneReason INTEGER,
|
|
juniPimMRouteNextHopJoinTypeSSRP TruthValue,
|
|
juniPimMRouteNextHopJoinTypeG TruthValue,
|
|
juniPimMRouteNextHopJoinTypeSG TruthValue,
|
|
juniPimMRouteNextHopHasLGM TruthValue,
|
|
juniPimMRouteNextHopHasOifAW TruthValue,
|
|
juniPimMRouteNextHopHasOifSendAssert TruthValue,
|
|
juniPimMRouteNextHopHasOifRegister TruthValue,
|
|
juniPimMRouteNextHopHasOifBorderBit TruthValue,
|
|
juniPimMRouteNextHopHasOifNullEncapsBit TruthValue,
|
|
juniPimMRouteNextHopJoinEndTimer TimeTicks,
|
|
juniPimMRouteNextHopAssertEndTimer TimeTicks,
|
|
juniPimMRouteNextHopNextAssertTimer TimeTicks,
|
|
juniPimMRouteNextHopAssertSrcAddress IpAddress,
|
|
juniPimMRouteNextHopRegisterSuppressionTimer TimeTicks,
|
|
juniPimMRouteNextHopPimType JuniPimType,
|
|
juniPimMRouteNextHopPruneTimeLeft TimeTicks,
|
|
juniPimMRouteNextHopsendingIpAddress IpAddress }
|
|
|
|
juniPimMRouteNextHopGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address. Specified as 224.0.0.0 for <*, *, RP> entries."
|
|
::= { juniPimMRouteNextHopEntry 2 }
|
|
|
|
juniPimMRouteNextHopSrcAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G>
|
|
entries."
|
|
::= { juniPimMRouteNextHopEntry 3 }
|
|
|
|
juniPimMRouteNextHopSrcMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address mask. Specified as 255.255.255.255 for <S, G>
|
|
entries and 0.0.0.0 for <*, *, RP> and <*, G> entries."
|
|
::= { juniPimMRouteNextHopEntry 4 }
|
|
|
|
juniPimMRouteNextHopRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and
|
|
<*, G> entries."
|
|
::= { juniPimMRouteNextHopEntry 5 }
|
|
|
|
juniPimMRouteNextHopIfId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the outgoing interface (next hop). Specified as
|
|
0 for register outgoing interface. Register outgoing interfaces are
|
|
created by DR on the source subnet to send PIM register encapsulated
|
|
data (as unicast) to RP. It is also used by PIM boundary routers
|
|
(PMBRs) to register data to RP."
|
|
::= { juniPimMRouteNextHopEntry 6 }
|
|
|
|
juniPimMRouteNextHopAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object takes following different values based on the type of next
|
|
hop. It should be set to the address of RP in case the next hop
|
|
interface is register interface i.e. juniPimMRouteNextHopIfId object is
|
|
set to 0. It should be set to the address of neighbor in case the
|
|
interface is an NBMA interface. In all other cases it should be set to
|
|
the group address itself."
|
|
::= { juniPimMRouteNextHopEntry 7 }
|
|
|
|
juniPimMRouteNextHopPruneReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
prune(2),
|
|
assert(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates why the downstream interface was pruned, whether
|
|
in response to a PIM prune message or due to PIM Assert processing."
|
|
::= { juniPimMRouteNextHopEntry 8 }
|
|
|
|
juniPimMRouteNextHopJoinTypeSSRP OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not the interface was added as a
|
|
result of receiving <*, *, RP> join in case of <*, *, RP> entry OR
|
|
inherited as outgoing interface from corresponding <*, *, RP> entry in
|
|
case of <*, G> entry."
|
|
::= { juniPimMRouteNextHopEntry 9 }
|
|
|
|
juniPimMRouteNextHopJoinTypeG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not the interface was added as a
|
|
result of receiving <*, G> join in case of <*, G> entry OR inherited as
|
|
outgoing interface from corresponding <*, G> entry in case of <S, G>
|
|
entry."
|
|
::= { juniPimMRouteNextHopEntry 10 }
|
|
|
|
juniPimMRouteNextHopJoinTypeSG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not the interface was added as a
|
|
result of receiving <S, G> join in case of <S, G> entry."
|
|
::= { juniPimMRouteNextHopEntry 11 }
|
|
|
|
juniPimMRouteNextHopHasLGM OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not the interface has local group
|
|
membership (as indicated by IGMP) in case of <*, G> and <S, G> entries."
|
|
::= { juniPimMRouteNextHopEntry 12 }
|
|
|
|
juniPimMRouteNextHopHasOifAW OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not this interface is the winner of
|
|
assert for corresponding <*, G>/<S, G> entry."
|
|
::= { juniPimMRouteNextHopEntry 13 }
|
|
|
|
juniPimMRouteNextHopHasOifSendAssert OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not this interface is going to send an
|
|
assert at the end of assert suppression interval. Assert suppression is
|
|
used to prevent a flood of assert to be generated in response to data or
|
|
other asserts."
|
|
::= { juniPimMRouteNextHopEntry 14 }
|
|
|
|
juniPimMRouteNextHopHasOifRegister OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not this next hop is a register
|
|
outgoing interface."
|
|
::= { juniPimMRouteNextHopEntry 15 }
|
|
|
|
juniPimMRouteNextHopHasOifBorderBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to describe a register outgoing interface. It
|
|
indicates whether or not the border bit is set in the register packet
|
|
when the packet is sent over the register interface. For all other
|
|
(non-register) interfaces its set to false."
|
|
::= { juniPimMRouteNextHopEntry 16 }
|
|
|
|
juniPimMRouteNextHopHasOifNullEncapsBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to describe a register outgoing interface. It
|
|
indicates whether or not the NULL encapsulation bit is set
|
|
(periodically) in the register packet when the packet is sent over the
|
|
register interface. For all other (non-register) interfaces its set to
|
|
false."
|
|
::= { juniPimMRouteNextHopEntry 17 }
|
|
|
|
juniPimMRouteNextHopJoinEndTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time (in seconds) left when the join timer
|
|
expires for the outgoing interface. Join timer for an outgoing
|
|
interface of <S, G> entry indicates when the <S, G> join expires, for a
|
|
<*, G> entry indicates when the <*, G> join expires and for a <*, *, RP>
|
|
entry indicates when the <*, *, RP> join expires. Inherited joins (like
|
|
<S, G> inheriting from <*, G> AND <*, G> inheriting from <*, *, RP>)
|
|
expire when the corresponding parent join expires."
|
|
::= { juniPimMRouteNextHopEntry 18 }
|
|
|
|
juniPimMRouteNextHopAssertEndTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time (in seconds) left when the assert timer
|
|
expires on this outgoing inteface."
|
|
::= { juniPimMRouteNextHopEntry 19 }
|
|
|
|
juniPimMRouteNextHopNextAssertTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the duration (in seconds) left for which sending
|
|
an assert has been suppressed on this outgoing interface."
|
|
::= { juniPimMRouteNextHopEntry 20 }
|
|
|
|
juniPimMRouteNextHopAssertSrcAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the source address which will be used in the
|
|
assert packet to send an assert out for the entry on this outgoing
|
|
interface. For <S, G> entries it is the address of the source S itself.
|
|
For <*, G> entries it is the address of the source whose data was
|
|
forwarded using this <*, G> and caused the assert situation to happen."
|
|
::= { juniPimMRouteNextHopEntry 21 }
|
|
|
|
juniPimMRouteNextHopRegisterSuppressionTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for register outgoing interfaces. It indicates the
|
|
duration (in seconds) left for which sending a register packet has been
|
|
suppressed on the register outgoing interface as a result of receiving
|
|
register-stop from the RP."
|
|
::= { juniPimMRouteNextHopEntry 22 }
|
|
|
|
juniPimMRouteNextHopPimType OBJECT-TYPE
|
|
SYNTAX JuniPimType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the outgoing interface was contributed by
|
|
sparse-mode or dense-mode PIM."
|
|
::= { juniPimMRouteNextHopEntry 23 }
|
|
|
|
juniPimMRouteNextHopPruneTimeLeft OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time (in seconds) left when the prune timer
|
|
expires on an outgoing inteface. Its used for pruned outgoing
|
|
interfaces contributed by dense-mode PIM."
|
|
::= { juniPimMRouteNextHopEntry 24 }
|
|
|
|
juniPimMRouteNextHopsendingIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the source IP address used by this interface to
|
|
send PIM packets out on this outgoing interface."
|
|
::= { juniPimMRouteNextHopEntry 25 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM RP-Set Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimRPSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing enterprise specific information on a
|
|
subset of the rows of the pimRPSetTable defined in the standard PIM
|
|
MIB."
|
|
::= { juniPimGlobal 14 }
|
|
|
|
juniPimRPSetEntry OBJECT-TYPE
|
|
SYNTAX JuniPimRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimRPSetTable."
|
|
INDEX { pimRPSetComponent,
|
|
pimRPSetGroupAddress,
|
|
pimRPSetGroupMask,
|
|
pimRPSetAddress }
|
|
::= { juniPimRPSetTable 1 }
|
|
|
|
JuniPimRPSetEntry ::= SEQUENCE {
|
|
juniPimRPSetPriority Integer32,
|
|
juniPimRPSetTypeInfo INTEGER,
|
|
juniPimRPSetAccessListName OCTET STRING }
|
|
|
|
juniPimRPSetPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the priority of the RP for this group-to-RP
|
|
mapping."
|
|
::= { juniPimRPSetEntry 1 }
|
|
|
|
juniPimRPSetTypeInfo OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pimRPTypeInvalid(0),
|
|
pimRPTypeStatic(1),
|
|
pimRPTypeStaticOverride(2),
|
|
pimRPTypeAutoRP(3),
|
|
pimRPTypeBSR(4),
|
|
pimRPTypeStaticNegative(5),
|
|
pimRPTypeStaticOverrideNegative(6),
|
|
pimRPTypeAutoRPNegative(7),
|
|
pimRPTypeBSRNegative(8) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the mechanism by which this group to RP mapping
|
|
has been learnt, i.e. whether its statically configured, AutoRP learnt
|
|
or BSR learnt. It also indicates whether the mapping is positive or
|
|
negative. Negative mappings force the groups in that range to fall into
|
|
dense-mode category if sparse-dense mode is configured or no RP if its
|
|
purely sparse mode configuration."
|
|
::= { juniPimRPSetEntry 2 }
|
|
|
|
juniPimRPSetAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object lists the name of the access list from which this
|
|
group-to-RP mapping was picked up in case of statically configured
|
|
RPs."
|
|
::= { juniPimRPSetEntry 3 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Static RP configuration table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimStaticRPConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimStaticRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing statically configured PIM RPs."
|
|
::= { juniPimGlobal 15 }
|
|
|
|
juniPimStaticRPConfEntry OBJECT-TYPE
|
|
SYNTAX JuniPimStaticRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimStaticRPConfTable."
|
|
INDEX { juniPimStaticRPConfComponentIndex,
|
|
juniPimStaticRPConfRPAddr,
|
|
juniPimStaticRPConfAccessListName }
|
|
::= { juniPimStaticRPConfTable 1 }
|
|
|
|
JuniPimStaticRPConfEntry ::= SEQUENCE {
|
|
juniPimStaticRPConfComponentIndex Integer32,
|
|
juniPimStaticRPConfRPAddr IpAddress,
|
|
juniPimStaticRPConfAccessListName OCTET STRING,
|
|
juniPimStaticRPConfRowStatus RowStatus,
|
|
juniPimStaticRPConfOverride TruthValue }
|
|
|
|
juniPimStaticRPConfComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol instance
|
|
connected to a separate domain should have a different index value."
|
|
::= { juniPimStaticRPConfEntry 1 }
|
|
|
|
juniPimStaticRPConfRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip address of the RP which for the group-to-RP mapping being
|
|
configured."
|
|
::= { juniPimStaticRPConfEntry 2 }
|
|
|
|
juniPimStaticRPConfAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the access list from which group-ranges are picked up for this
|
|
group-ro-RP mapping. Every deny component in the list is added as
|
|
negative group-ro-RP mapping."
|
|
::= { juniPimStaticRPConfEntry 3 }
|
|
|
|
juniPimStaticRPConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be created, or old
|
|
entries deleted from this table."
|
|
::= { juniPimStaticRPConfEntry 4 }
|
|
|
|
juniPimStaticRPConfOverride OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates whether or not this statically configured
|
|
group-to-RP mapping should override the group-to-RP mapping learnt via
|
|
AutoRP for the component group-ranges in the access list. By default
|
|
AutoRP learnt group-to-RP mappings are preferred over statically
|
|
configured ones. While setting the rowStatus to create a static RP,
|
|
this field should be assigned to true if the override property is
|
|
desired."
|
|
DEFVAL { false }
|
|
::= { juniPimStaticRPConfEntry 5 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM AutoRP Candidate RP configuration table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimAutoRPConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimAutoRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table allowing AutoRP configuration of candidate RPs
|
|
(advertisement agents)."
|
|
::= { juniPimGlobal 16 }
|
|
|
|
juniPimAutoRPConfEntry OBJECT-TYPE
|
|
SYNTAX JuniPimAutoRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimAutoRPConfTable."
|
|
INDEX { juniPimAutoRPConfComponentIndex,
|
|
juniPimAutoRPConfCandRPAddr,
|
|
juniPimAutoRPConfGroupAccessListName }
|
|
::= { juniPimAutoRPConfTable 1 }
|
|
|
|
JuniPimAutoRPConfEntry ::= SEQUENCE {
|
|
juniPimAutoRPConfComponentIndex Integer32,
|
|
juniPimAutoRPConfCandRPAddr IpAddress,
|
|
juniPimAutoRPConfGroupAccessListName OCTET STRING,
|
|
juniPimAutoRPConfRowStatus RowStatus,
|
|
juniPimAutoRPConfTTL Integer32,
|
|
juniPimAutoRPConfAncmntIntvl TimeTicks,
|
|
juniPimAutoRPConfifId InterfaceIndex }
|
|
|
|
juniPimAutoRPConfComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol instance
|
|
connected to a separate domain should have a different index value."
|
|
::= { juniPimAutoRPConfEntry 1 }
|
|
|
|
juniPimAutoRPConfCandRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the candidate RP for this advertising agent
|
|
configuration."
|
|
::= { juniPimAutoRPConfEntry 2 }
|
|
|
|
juniPimAutoRPConfGroupAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access list name from which group ranges are picked up for
|
|
advertising agent configuration."
|
|
::= { juniPimAutoRPConfEntry 3 }
|
|
|
|
juniPimAutoRPConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be created, or old
|
|
entries deleted from this table."
|
|
::= { juniPimAutoRPConfEntry 4 }
|
|
|
|
juniPimAutoRPConfTTL OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value used while sending AutoRP advertisement out for
|
|
this group-to-RP mappings created as a result of this configuration.
|
|
This should be set along with juniPimAutoRPConfRowStatus while creating
|
|
an AutoRP advertising agent to denote the TTL value to be used."
|
|
DEFVAL { 64 }
|
|
::= { juniPimAutoRPConfEntry 5 }
|
|
|
|
juniPimAutoRPConfAncmntIntvl OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval at which AutoRP advertisements are sent out for the
|
|
group-to-RP mappings created as a result of this configuration. This
|
|
should be set along with juniPimAutoRPConfRowStatus while creating an
|
|
AutoRP advertising agent to denote the announcement interval to be
|
|
used."
|
|
DEFVAL { 60 }
|
|
::= { juniPimAutoRPConfEntry 6 }
|
|
|
|
juniPimAutoRPConfifId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the interface for the candidate RP if an
|
|
interface with that address exists else it is set to 0."
|
|
::= { juniPimAutoRPConfEntry 7 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM AutoRP candidate RP table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimAutoRPCandTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimAutoRPCandEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing AutoRP candidate RPS (advertising
|
|
agents)."
|
|
::= { juniPimGlobal 17 }
|
|
|
|
juniPimAutoRPCandEntry OBJECT-TYPE
|
|
SYNTAX JuniPimAutoRPCandEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimAutoRPCandTable."
|
|
INDEX { juniPimAutoRPCandComponentIndex,
|
|
juniPimAutoRPCandRPAddr,
|
|
juniPimAutoRPCandGroupAddr,
|
|
juniPimAutoRPCandGroupMask }
|
|
::= { juniPimAutoRPCandTable 1 }
|
|
|
|
JuniPimAutoRPCandEntry ::= SEQUENCE {
|
|
juniPimAutoRPCandComponentIndex Integer32,
|
|
juniPimAutoRPCandRPAddr IpAddress,
|
|
juniPimAutoRPCandGroupAddr IpAddress,
|
|
juniPimAutoRPCandGroupMask IpAddress,
|
|
juniPimAutoRPCandRowStatus RowStatus,
|
|
juniPimAutoRPCandAccessListName OCTET STRING,
|
|
juniPimAutoRPCandAutoRPTTL Integer32,
|
|
juniPimAutoRPCandAutoRPAncmntIntvl TimeTicks,
|
|
juniPimAutoRPCandIfId InterfaceIndex }
|
|
|
|
juniPimAutoRPCandComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol instance
|
|
connected to a separate domain should have a different index value."
|
|
::= { juniPimAutoRPCandEntry 1 }
|
|
|
|
juniPimAutoRPCandRPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the candidate RP for this group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 2 }
|
|
|
|
juniPimAutoRPCandGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of the candidate RP for this group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 3 }
|
|
|
|
juniPimAutoRPCandGroupMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group mask of the candidate RP for this group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 4 }
|
|
|
|
juniPimAutoRPCandRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current status of this row."
|
|
::= { juniPimAutoRPCandEntry 5 }
|
|
|
|
juniPimAutoRPCandAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the group list using which this AutoRP group-to-RP
|
|
candidate RP mapping was configured."
|
|
::= { juniPimAutoRPCandEntry 6 }
|
|
|
|
juniPimAutoRPCandAutoRPTTL OBJECT-TYPE
|
|
SYNTAX Integer32(1..'FFFF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value used while sending AutoRP advertisement out for
|
|
this group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 7 }
|
|
|
|
juniPimAutoRPCandAutoRPAncmntIntvl OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval at which AutoRP advertisements are sent out for this
|
|
group-to-RP mapping."
|
|
::= { juniPimAutoRPCandEntry 8 }
|
|
|
|
juniPimAutoRPCandIfId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the interface for this AutoRP group-to-RP
|
|
candidate RP mapping if an interface for RP address exists else it is
|
|
set to 0."
|
|
::= { juniPimAutoRPCandEntry 9 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Component Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimComponentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimComponentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing each component (domain) in PIM."
|
|
::= { juniPimGlobal 18 }
|
|
|
|
juniPimComponentEntry OBJECT-TYPE
|
|
SYNTAX JuniPimComponentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimComponentTable."
|
|
INDEX { juniPimComponentIndex }
|
|
::= { juniPimComponentTable 1 }
|
|
|
|
JuniPimComponentEntry ::= SEQUENCE {
|
|
juniPimComponentIndex Integer32,
|
|
juniPimComponentAutoRPMappingAgentRowStatus RowStatus,
|
|
juniPimComponentConfiguredAutoRPMappingAgentIfId InterfaceIndex,
|
|
juniPimComponentAutoRPMappingAgentInterval TimeTicks,
|
|
juniPimComponentAutoRPMappingTTL Integer32,
|
|
juniPimComponentAutoRPMappingAgentIntfAddr IpAddress,
|
|
juniPimComponentAutoRPMappingAgentWinnerAddr IpAddress,
|
|
juniPimComponentAutoRPMappingAgentWinnerLastHeard TimeTicks }
|
|
|
|
juniPimComponentIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol instance
|
|
connected to a separate domain should have a different index value."
|
|
::= { juniPimComponentEntry 1 }
|
|
|
|
juniPimComponentAutoRPMappingAgentRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of AutoRP mapping agent by which this router can be made an
|
|
AutoRP mapping agent or removed from being an AutoRP mapping agent in
|
|
this component."
|
|
::= { juniPimComponentEntry 2 }
|
|
|
|
juniPimComponentConfiguredAutoRPMappingAgentIfId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the interface which mapping agent should use to
|
|
send AutoRP mapping messages. If not specified, the interface with
|
|
highest IP address in this domain is picked up for this purpose."
|
|
::= { juniPimComponentEntry 3 }
|
|
|
|
juniPimComponentAutoRPMappingAgentInterval OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval at which AutoRP mapping messages are sent out in this
|
|
component. The default value is 60 seconds."
|
|
DEFVAL { 60 }
|
|
::= { juniPimComponentEntry 4 }
|
|
|
|
juniPimComponentAutoRPMappingTTL OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value used while sending AutoRP mapping messages out
|
|
in this component."
|
|
DEFVAL { 64 }
|
|
::= { juniPimComponentEntry 5 }
|
|
|
|
juniPimComponentAutoRPMappingAgentIntfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the interface which mapping agent is using to send
|
|
AutoRP mapping messages."
|
|
::= { juniPimComponentEntry 6 }
|
|
|
|
juniPimComponentAutoRPMappingAgentWinnerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the winner AutoRP mapping agent. There can be
|
|
multiple mapping agents configured in a given PIM domain(component).
|
|
The mapping agent with highest IP address is chosen as the winner and it
|
|
continues to send AutoRP mapping messages. If the router itself is the
|
|
winner, then this is set to 0.0.0.0."
|
|
::= { juniPimComponentEntry 7 }
|
|
|
|
juniPimComponentAutoRPMappingAgentWinnerLastHeard OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in seconds) that has past since an AutoRP mapping message was
|
|
receieved from the winner AutoRP mapping agent. If the router itself is
|
|
the winner, then this is set to 0."
|
|
::= { juniPimComponentEntry 8 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Unicast Route Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimUnicastRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimUnicastRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing all the unicast routes currently in use
|
|
by PIM for diong RPF checking."
|
|
::= { juniPimGlobal 19 }
|
|
|
|
juniPimUnicastRouteEntry OBJECT-TYPE
|
|
SYNTAX JuniPimUnicastRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimUnicastRouteTable."
|
|
INDEX { juniPimUnicastRouteEntryAddr,
|
|
juniPimUnicastRouteEntryMask }
|
|
::= { juniPimUnicastRouteTable 1 }
|
|
|
|
JuniPimUnicastRouteEntry ::= SEQUENCE {
|
|
juniPimUnicastRouteEntryAddr IpAddress,
|
|
juniPimUnicastRouteEntryMask IpAddress,
|
|
juniPimUnicastRouteEntryRpfNbr IpAddress,
|
|
juniPimUnicastRouteEntryIifId InterfaceIndex,
|
|
juniPimUnicastRouteEntryIifAddr IpAddress,
|
|
juniPimUnicastRouteEntryPref Integer32,
|
|
juniPimUnicastRouteEntryMetric Integer32,
|
|
juniPimUnicastRouteEntryPimType JuniPimType }
|
|
|
|
juniPimUnicastRouteEntryAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of route in use."
|
|
::= { juniPimUnicastRouteEntry 1 }
|
|
|
|
juniPimUnicastRouteEntryMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of route in use."
|
|
::= { juniPimUnicastRouteEntry 2 }
|
|
|
|
juniPimUnicastRouteEntryRpfNbr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RPF neighbor (next-hop) to reach the route of this entry. It is
|
|
set to 0.0.0.0 for directly connected routes."
|
|
::= { juniPimUnicastRouteEntry 3 }
|
|
|
|
juniPimUnicastRouteEntryIifId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index (next-hop) to reach the route of this entry."
|
|
::= { juniPimUnicastRouteEntry 4 }
|
|
|
|
juniPimUnicastRouteEntryIifAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface address (next-hop) to reach the route of this entry."
|
|
::= { juniPimUnicastRouteEntry 5 }
|
|
|
|
juniPimUnicastRouteEntryPref OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference of the route of this entry."
|
|
::= { juniPimUnicastRouteEntry 6 }
|
|
|
|
juniPimUnicastRouteEntryMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of the route of this entry."
|
|
::= { juniPimUnicastRouteEntry 7 }
|
|
|
|
juniPimUnicastRouteEntryPimType OBJECT-TYPE
|
|
SYNTAX JuniPimType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the route specified in this entry is
|
|
being used by sparse-mode and/or dense-mode PIM."
|
|
::= { juniPimUnicastRouteEntry 8 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The PIM Shortest Path Tree Threshold Table
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimSPTThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniPimSPTThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing threshold values set for switching from
|
|
shared tree to shortest path tree and vice versa for data forwarded by
|
|
PIM sparse-mode."
|
|
::= { juniPimGlobal 20 }
|
|
|
|
juniPimSPTThresholdEntry OBJECT-TYPE
|
|
SYNTAX JuniPimSPTThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the juniPimSPTThresholdTable."
|
|
INDEX { juniPimSPTThresholdAccessListName }
|
|
::= { juniPimSPTThresholdTable 1 }
|
|
|
|
JuniPimSPTThresholdEntry ::= SEQUENCE {
|
|
juniPimSPTThresholdAccessListName OCTET STRING,
|
|
juniPimSPTThresholdRowStatus RowStatus,
|
|
juniPimSPTThresholdKbps Integer32 }
|
|
|
|
juniPimSPTThresholdAccessListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the access list from which group ranges are picked up for
|
|
setting SPT threshold in this entry."
|
|
::= { juniPimSPTThresholdEntry 1 }
|
|
|
|
juniPimSPTThresholdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be created, or old
|
|
entries deleted from this table."
|
|
::= { juniPimSPTThresholdEntry 2 }
|
|
|
|
juniPimSPTThresholdKbps OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of SPT threshold in kilobits per second. Default value is
|
|
0."
|
|
DEFVAL { 0 }
|
|
::= { juniPimSPTThresholdEntry 3 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniPimConformance OBJECT IDENTIFIER ::= { juniPimMIB 2 }
|
|
juniPimCompliances OBJECT IDENTIFIER ::= { juniPimConformance 1 }
|
|
juniPimGroups OBJECT IDENTIFIER ::= { juniPimConformance 2 }
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
juniPimCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the Juniper PIM
|
|
MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniPimGeneralGroup,
|
|
juniPimInterfaceGroup,
|
|
juniPimMRouteConfGroup,
|
|
juniPimMRouteNextHopGroup,
|
|
juniPimRPSetGroup,
|
|
juniPimStaticRPConfGroup,
|
|
juniPimAutoRPConfGroup,
|
|
juniPimAutoRPCandGroup,
|
|
juniPimComponentGroup,
|
|
juniPimUnicastRouteGroup,
|
|
juniPimSPTThresholdGroup }
|
|
::= { juniPimCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
juniPimGeneralGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimNumHelloRcvd,
|
|
juniPimNumJoinPruneRcvd,
|
|
juniPimNumAssertRcvd,
|
|
juniPimNumGraftRcvd,
|
|
juniPimNumGraftAckRcvd,
|
|
juniPimNumHelloSent,
|
|
juniPimNumJoinPruneSent,
|
|
juniPimNumAssertSent,
|
|
juniPimNumGraftSent,
|
|
juniPimNumGraftAckSent }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing general PIM capabilities in a
|
|
Juniper product."
|
|
::= { juniPimGroups 1 } -- JUNOSe 3.0
|
|
|
|
juniPimInterfaceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimIntfNumHelloRcvd,
|
|
juniPimIntfNumJoinPruneRcvd,
|
|
juniPimIntfNumAssertRcvd,
|
|
juniPimIntfNumGraftRcvd,
|
|
juniPimIntfNumGraftAckRcvd,
|
|
juniPimIntfNumHelloSent,
|
|
juniPimIntfNumJoinPruneSent,
|
|
juniPimIntfNumAssertSent,
|
|
juniPimIntfNumGraftSent,
|
|
juniPimIntfNumGraftAckSent,
|
|
juniPimIntfVersion,
|
|
juniPimIntfNumNbrs }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM interface capabilities in a
|
|
Juniper product."
|
|
::= { juniPimGroups 2 }
|
|
|
|
juniPimMRouteConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimMRouteUpstreamAssertTimer,
|
|
juniPimMRouteAssertMetric,
|
|
juniPimMRouteAssertPref,
|
|
juniPimMRouteAssertRPTBit,
|
|
juniPimMRouteBits,
|
|
juniPimMRouteRPAddrInUse,
|
|
juniPimMRouteUpstreamNbr,
|
|
juniPimMRouteIifAddr,
|
|
juniPimMRouteIsWaitingToSwitchToSPT,
|
|
juniPimMRouteEntryExpiryTimer,
|
|
juniPimMRouteSenderDRAddr,
|
|
juniPimMRouteRouteAddr,
|
|
juniPimMRouteRouteMask,
|
|
juniPimMRouteGRPAddr,
|
|
juniPimMRouteGRPMask,
|
|
juniPimMRouteOtherProtoOifJoinTypeAll,
|
|
juniPimMRouteOtherProtoOifJoinTypeG,
|
|
juniPimMRouteOtherProtoOifJoinTypeSG,
|
|
juniPimMRoutePimType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM multicast route capabilities
|
|
in a Juniper product."
|
|
::= { juniPimGroups 3 }
|
|
|
|
juniPimMRouteNextHopGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimMRouteNextHopPruneReason,
|
|
juniPimMRouteNextHopJoinTypeSSRP,
|
|
juniPimMRouteNextHopJoinTypeG,
|
|
juniPimMRouteNextHopJoinTypeSG,
|
|
juniPimMRouteNextHopHasLGM,
|
|
juniPimMRouteNextHopHasOifAW,
|
|
juniPimMRouteNextHopHasOifSendAssert,
|
|
juniPimMRouteNextHopHasOifRegister,
|
|
juniPimMRouteNextHopHasOifBorderBit,
|
|
juniPimMRouteNextHopHasOifNullEncapsBit,
|
|
juniPimMRouteNextHopJoinEndTimer,
|
|
juniPimMRouteNextHopAssertEndTimer,
|
|
juniPimMRouteNextHopNextAssertTimer,
|
|
juniPimMRouteNextHopAssertSrcAddress,
|
|
juniPimMRouteNextHopRegisterSuppressionTimer,
|
|
juniPimMRouteNextHopPimType,
|
|
juniPimMRouteNextHopPruneTimeLeft,
|
|
juniPimMRouteNextHopsendingIpAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM multicast route next hop
|
|
capabilities in a Juniper product."
|
|
::= { juniPimGroups 4 }
|
|
|
|
juniPimRPSetGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimRPSetPriority,
|
|
juniPimRPSetTypeInfo,
|
|
juniPimRPSetAccessListName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM RP-Set capabilities in a
|
|
Juniper product."
|
|
::= { juniPimGroups 5 }
|
|
|
|
juniPimStaticRPConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimStaticRPConfRowStatus,
|
|
juniPimStaticRPConfOverride }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing statically configured PIM RPs
|
|
capabilities in a Juniper product."
|
|
::= { juniPimGroups 6 }
|
|
|
|
juniPimAutoRPConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimAutoRPConfRowStatus,
|
|
juniPimAutoRPConfTTL,
|
|
juniPimAutoRPConfAncmntIntvl,
|
|
juniPimAutoRPConfifId }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM AutoRP candidate advertisment
|
|
agent RP capabilities in a Juniper product."
|
|
::= { juniPimGroups 7 }
|
|
|
|
juniPimAutoRPCandGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimAutoRPCandRowStatus,
|
|
juniPimAutoRPCandAccessListName,
|
|
juniPimAutoRPCandAutoRPTTL,
|
|
juniPimAutoRPCandAutoRPAncmntIntvl,
|
|
juniPimAutoRPCandIfId }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM AutoRP candidate advertising
|
|
agent RP capabilities in a Juniper product."
|
|
::= { juniPimGroups 8 }
|
|
|
|
juniPimComponentGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimComponentAutoRPMappingAgentRowStatus,
|
|
juniPimComponentConfiguredAutoRPMappingAgentIfId,
|
|
juniPimComponentAutoRPMappingAgentInterval,
|
|
juniPimComponentAutoRPMappingTTL,
|
|
juniPimComponentAutoRPMappingAgentIntfAddr,
|
|
juniPimComponentAutoRPMappingAgentWinnerAddr,
|
|
juniPimComponentAutoRPMappingAgentWinnerLastHeard }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM component (domain)
|
|
capabilities in a Juniper product."
|
|
::= { juniPimGroups 9 }
|
|
|
|
juniPimUnicastRouteGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimUnicastRouteEntryRpfNbr,
|
|
juniPimUnicastRouteEntryIifId,
|
|
juniPimUnicastRouteEntryIifAddr,
|
|
juniPimUnicastRouteEntryPref,
|
|
juniPimUnicastRouteEntryMetric,
|
|
juniPimUnicastRouteEntryPimType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM unicast route capabilities in
|
|
a Juniper product."
|
|
::= { juniPimGroups 10 }
|
|
|
|
juniPimSPTThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniPimSPTThresholdRowStatus,
|
|
juniPimSPTThresholdKbps }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing PIM shortest path tree threshold
|
|
capabilities in a Juniper product."
|
|
::= { juniPimGroups 11 }
|
|
|
|
END
|