Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
3077 lines
110 KiB
Text
3077 lines
110 KiB
Text
|
|
-- *****************************************************************************
|
|
-- Juniper-ISIS-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- Integrated IS-IS MIB
|
|
--
|
|
-- Copyright (c) 1997 The Internet Society.
|
|
-- Copyright (c) 2000, 2001 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002 Juniper Networks, Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-ISIS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, IpAddress, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue
|
|
FROM SNMPv2-TC
|
|
juniMibs
|
|
FROM Juniper-MIBs;
|
|
|
|
juniIsisMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200603131430Z" -- 13-Mar-06 02:30 PM EST
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
Email: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"The intermediate system to intermediate system (IS-IS) routing protocol
|
|
MIB for Juniper Networks E-series products. This MIB provides
|
|
objects for management of the IS-IS Routing protocol, as described in
|
|
ISO 10589, when it is used to construct routing tables for IP networks,
|
|
as described in RFC 1195."
|
|
-- Revision History
|
|
REVISION "200612131330Z" -- 13-Dec-06 01:30 PM EST - JUNOSe 8.0
|
|
DESCRIPTION
|
|
"Modifiled width of juniIsisMplsTeTunnelName from 32 to 40"
|
|
REVISION "200603011430Z" -- 13-Mar-06 02:30 PM EST - JUNOSe 7.4
|
|
DESCRIPTION
|
|
"Added juniIsisSysReferenceBandwidth and juniIsisSysHighReferenceBandwidth
|
|
to juniIsisSysEntry"
|
|
REVISION "200603011430Z" -- 01-Mar-06 02:30 PM EST - JUNOSe 7.4
|
|
DESCRIPTION
|
|
"Added juniIsisSysMplsTeSpfUseAnyBestPath to juniIsisSysEntry.
|
|
Added juniIsisMplsTeTunnelTable to juniIsisSystemGroup"
|
|
REVISION "200512261430Z" -- 26-Dec-05 09:30 AM EST - JUNOSe 7.0
|
|
DESCRIPTION
|
|
"Default value for juniIsisSysLSPIgnoreErrors is changed from false to true.
|
|
Default value for juniIsisCircMeshGroup =1 is removed"
|
|
REVISION "200510210810Z" -- 21-Oct-05 03:10 AM EST - RX 6.1.0
|
|
DESCRIPTION
|
|
"L2 Buffer Size is added and is made obsolete."
|
|
REVISION "200503291430Z" -- 29-Mar-05 09:30 AM EST - JUNOSe 7.0
|
|
DESCRIPTION
|
|
"Updated the SystemID TEXTUAL-CONVENTION to be inline with standard
|
|
- SystemID should now be exactly 6 bytes.
|
|
- SystemID description modified. All zeros are invalid."
|
|
REVISION "200501170810Z" -- 17-Jan-05 03:10 AM EST - RX 6.1.0
|
|
DESCRIPTION
|
|
"Updated the upper bound for Max Split Paths and removed the
|
|
L2 Buffer Size"
|
|
REVISION "200501060504Z" -- 06-Jan-05 01:04 AM EST - JUNOSe 7.0
|
|
DESCRIPTION
|
|
"Modified the default value for the juniIsisSysSetOverloadBitStartupDuration
|
|
object. This object has a meaning only if the ISIS overload bit
|
|
is set."
|
|
REVISION "200411020504Z" -- 02-Nov-04 01:04 AM EST - RX 5.2.2
|
|
DESCRIPTION
|
|
"Updated the upper bound for Authentication Key Id in Area
|
|
Authentication, Domain Authentication, L1 Circuit and L2 Circuit
|
|
Tables."
|
|
REVISION "200410181414Z" -- 18-Oct-04 09:14 AM EST - RX 5.0.4
|
|
DESCRIPTION
|
|
"Changed the lower bound value & default value of juniIsisSysSetOverloadBitStartupDuration
|
|
from 0 to 5."
|
|
REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Replaced Unisphere names with Juniper names."
|
|
REVISION "200112102129Z" -- 10-Dec-01 04:29 PM EST - JUNOSe 4.0
|
|
DESCRIPTION
|
|
"Added MPLS support."
|
|
REVISION "200112071522Z" -- 07-Dec-01 10:22 AM EST - JUNOSe 3.3
|
|
DESCRIPTION
|
|
"Added support for simple password protection."
|
|
REVISION "200104172126Z" -- 17-Apr-01 05:26 PM EDT - JUNOSe 3.0
|
|
DESCRIPTION
|
|
"Add circuit state object."
|
|
REVISION "200002220000Z" -- 22-Feb-00 - JUNOSe 2.0
|
|
DESCRIPTION
|
|
"Initial version of this MIB module, based on draft-ietf-isis-wg-mib."
|
|
::= { juniMibs 38 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Textual conventions
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Type definitions
|
|
--
|
|
OSINSAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSI Network Service Address, e.g. NSAP, Network Entity Title"
|
|
SYNTAX OCTET STRING (SIZE(0..20))
|
|
|
|
SystemID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A system ID of exactly six bytes.
|
|
Must not be all zeros."
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
|
|
OperState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type used in enabling and disabling a row."
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2) }
|
|
|
|
AuthTime ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Then number of seconds since Jan. 1 1970."
|
|
SYNTAX Integer32
|
|
|
|
LSPBuffSize ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub range for LSP size."
|
|
SYNTAX Integer32 (512..9180)
|
|
|
|
LevelState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"States of the ISIS protocol."
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2),
|
|
waiting(3) }
|
|
|
|
SupportedProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Types of network protocol supported by Integrated ISIS. The values for
|
|
ISO8473 and IP are those registered for these protocols in ISO TR9577."
|
|
SYNTAX INTEGER {
|
|
iso8473(129),
|
|
ip(204),
|
|
ipV6(205) }
|
|
|
|
JuniDefaultMetric ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for default metric for single hop. The value is
|
|
truncated to 63 when the juniIsisSysL1MetricStyle or
|
|
juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow "
|
|
SYNTAX Integer32 (0..16777215)
|
|
|
|
OtherMetric ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for metrics other than the default metric for single
|
|
hop."
|
|
SYNTAX Integer32 (0..63)
|
|
|
|
CircuitID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ID for a circuit."
|
|
SYNTAX OCTET STRING (SIZE(2..9))
|
|
|
|
ISPriority ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for ISIS priority."
|
|
SYNTAX Integer32 (1..127)
|
|
|
|
|
|
-- Behaviour Definitions
|
|
|
|
-- ResettingTimer behaviour definition
|
|
-- "This object specifies the interval between certain events in
|
|
-- the operation of the protocol state machine. If the value of
|
|
-- this object is set to a new value while the protocol state
|
|
-- machine is in operation, the implementation shall take the
|
|
-- necessary steps to ensure that for any time interval which
|
|
-- was in progress when the value of the corresponding object
|
|
-- was changed, the next expiration of that interval takes place
|
|
-- the specified time after the original start of that interval,
|
|
-- or immediately, whichever is later. The precision with which
|
|
-- this time shall be implemented shall be the same as that
|
|
-- associated with the basic operation of the timer object."
|
|
|
|
-- OperationalState behaviour definition
|
|
-- "This object controls the enabling and disabling of the
|
|
-- corresponding table row. Setting this object to the value
|
|
-- off has the effect of disabling the corresponding row.
|
|
-- Setting this object to the value on has the effect of
|
|
-- enabling the corresponding row. Setting the value of this
|
|
-- object to the same value as its current value has no effect.
|
|
-- If the table entry also contains an object controlling the
|
|
-- RowStatus then the object following the operationalState
|
|
-- behaviour shall not be set to on when the object following
|
|
-- the RowStatus behaviour has value off. An attempt to do
|
|
-- so is rejected."
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniIsisObjects OBJECT IDENTIFIER ::= { juniIsisMIB 1 }
|
|
juniIsisTrapGroup OBJECT IDENTIFIER ::= { juniIsisMIB 2 }
|
|
juniIsisConformance OBJECT IDENTIFIER ::= { juniIsisMIB 3 }
|
|
|
|
juniIsisSystemGroup OBJECT IDENTIFIER ::= { juniIsisObjects 1}
|
|
juniIsisCircuitGroup OBJECT IDENTIFIER ::= { juniIsisObjects 2 }
|
|
|
|
juniIsisSysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of instances of the Integrated IS-IS protocol existing on the
|
|
system."
|
|
::= { juniIsisSystemGroup 1 }
|
|
|
|
juniIsisSysEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row defines information specific to a single instance of the
|
|
protocol existing on the system."
|
|
REFERENCE
|
|
"ISIS.poi cLNSISISBasic-P (1)"
|
|
INDEX { juniIsisSysInstance }
|
|
::= { juniIsisSysTable 1 }
|
|
|
|
JuniIsisSysEntry ::= SEQUENCE {
|
|
juniIsisSysInstance Integer32,
|
|
juniIsisSysVersion DisplayString,
|
|
juniIsisSysType INTEGER,
|
|
juniIsisSysID SystemID,
|
|
juniIsisSysMaxPathSplits Integer32,
|
|
juniIsisSysMaxLSPGenInt Integer32,
|
|
juniIsisSysOrigLSPBuffSize LSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses Integer32,
|
|
juniIsisSysMinL1LSPGenInt Integer32,
|
|
juniIsisSysMinL2LSPGenInt Integer32,
|
|
juniIsisSysPollESHelloRate Integer32,
|
|
juniIsisSysWaitTime Integer32,
|
|
juniIsisSysOperState OperState,
|
|
juniIsisSysL1State LevelState,
|
|
juniIsisSysCorrLSPs Counter32,
|
|
juniIsisSysLSPL1DbaseOloads Counter32,
|
|
juniIsisSysManAddrDropFromAreas Counter32,
|
|
juniIsisSysAttmptToExMaxSeqNums Counter32,
|
|
juniIsisSysSeqNumSkips Counter32,
|
|
juniIsisSysOwnLSPPurges Counter32,
|
|
juniIsisSysIDFieldLenMismatches Counter32,
|
|
juniIsisSysMaxAreaAddrMismatches Counter32,
|
|
juniIsisSysOrigL2LSPBuffSize LSPBuffSize,
|
|
juniIsisSysL2State LevelState,
|
|
juniIsisSysLSPL2DbaseOloads Counter32,
|
|
juniIsisSysAuthFails Counter32,
|
|
juniIsisSysLSPIgnoreErrors TruthValue,
|
|
juniIsisSysMaxAreaCheck TruthValue,
|
|
juniIsisSysSetOverloadBit TruthValue,
|
|
juniIsisSysSetOverloadBitStartupDuration Integer32,
|
|
juniIsisSysMaxLspLifetime Integer32,
|
|
juniIsisSysL1SpfInterval Integer32,
|
|
juniIsisSysL2SpfInterval Integer32,
|
|
juniIsisSysIshHoldTime Integer32,
|
|
juniIsisSysIshConfigTimer Integer32,
|
|
juniIsisSysDistributeDomainWide TruthValue,
|
|
juniIsisSysDistance Integer32,
|
|
juniIsisSysL1MetricStyle INTEGER,
|
|
juniIsisSysL2MetricStyle INTEGER,
|
|
juniIsisSysIsoRouteTag OCTET STRING,
|
|
juniIsisSysMplsTeLevel INTEGER,
|
|
juniIsisSysMplsTeRtrIdIfIndex InterfaceIndexOrZero,
|
|
juniIsisSysMplsTeSpfUseAnyBestPath TruthValue,
|
|
juniIsisSysReferenceBandwidth Gauge32,
|
|
juniIsisSysHighReferenceBandwidth Gauge32 }
|
|
|
|
juniIsisSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysEntry 1 }
|
|
|
|
juniIsisSysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of the IS-IS protocol to which this instance
|
|
conforms. This value must be set by the implementation when the row is
|
|
valid."
|
|
REFERENCE
|
|
"ISIS.aoi version (1)"
|
|
::= { juniIsisSysEntry 2 }
|
|
|
|
juniIsisSysType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level1IS(1),
|
|
level1l2IS(2),
|
|
level2Only(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this instance of the Integrated IS-IS protocol. This
|
|
object follows the replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi iSType (2)"
|
|
::= { juniIsisSysEntry 3 }
|
|
|
|
juniIsisSysID OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for this instance of the Integrated IS-IS protocol. This value
|
|
is appended to each of the instance's area addresses to form the Network
|
|
Entity Titles valid for this instance. The derivation of a value for
|
|
this object is implementation-specific. Some implementations may assign
|
|
values and not permit write MAX-ACCESS, others may require the value to
|
|
be set manually."
|
|
REFERENCE
|
|
"ISIS.aoi systemId (119)"
|
|
::= { juniIsisSysEntry 4 }
|
|
|
|
juniIsisSysMaxPathSplits OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of paths with equal routing metric value which it is
|
|
permitted to split between. This object follows the
|
|
replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi maximumPathSplits (3)"
|
|
DEFVAL { 4 }
|
|
::= { juniIsisSysEntry 5 }
|
|
|
|
juniIsisSysMaxLSPGenInt OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum interval, in seconds, between generated LSPs by this instance.
|
|
This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi maximumLSPGenerationInterval (6)"
|
|
DEFVAL { 900 }
|
|
::= { juniIsisSysEntry 6 }
|
|
|
|
juniIsisSysOrigLSPBuffSize OBJECT-TYPE
|
|
SYNTAX LSPBuffSize
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum size of LSPs and SNPs originated by this instance.
|
|
This object follows the replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi originatingLSPBufferSize (9)"
|
|
DEFVAL { 1497 }
|
|
::= { juniIsisSysEntry 7 }
|
|
|
|
juniIsisSysMaxAreaAddresses OBJECT-TYPE
|
|
SYNTAX Integer32 (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of area addresses to be permitted for the area in
|
|
which this instance exists. Note that all Intermediate Systems in the
|
|
same area must have the same value configured for this attribute if
|
|
correct operation is to be assumed. This object follows the
|
|
replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi maximumAreaAddresses (4)"
|
|
DEFVAL { 3 }
|
|
::= { juniIsisSysEntry 8 }
|
|
|
|
juniIsisSysMinL1LSPGenInt OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between successive generation of L1 LSPs
|
|
with the same LSPID by this instance. This object follows the
|
|
resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi minimumLSPGenerationInterval (11)"
|
|
DEFVAL { 5 }
|
|
::= { juniIsisSysEntry 9 }
|
|
|
|
juniIsisSysMinL2LSPGenInt OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between successive generation of L2 LSPs
|
|
with the same LSPID by this instance. This object follows the
|
|
resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi minimumLSPGenerationInterval (11)"
|
|
DEFVAL { 5 }
|
|
::= { juniIsisSysEntry 10 }
|
|
|
|
juniIsisSysPollESHelloRate OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value, in seconds, to be used for the suggested ES configuration
|
|
timer in ISH PDUs when soliciting the ES configuration."
|
|
REFERENCE
|
|
"ISIS.aoi pollESHelloRate (13)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisSysEntry 11 }
|
|
|
|
juniIsisSysWaitTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds to delay in waiting state before entering on state.
|
|
This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi waitingTime (15)"
|
|
DEFVAL { 60 }
|
|
::= { juniIsisSysEntry 12 }
|
|
|
|
juniIsisSysOperState OBJECT-TYPE
|
|
SYNTAX OperState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of this instance of the Integrated IS-IS
|
|
protocol. Setting this object to the value on when its current value is
|
|
off enables operation of this instance of the Integrated IS-IS
|
|
protocol."
|
|
DEFVAL { off }
|
|
::= { juniIsisSysEntry 13 }
|
|
|
|
juniIsisSysL1State OBJECT-TYPE
|
|
SYNTAX LevelState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the Level 1 database."
|
|
REFERENCE
|
|
"ISIS.aoi l1State (17)"
|
|
::= { juniIsisSysEntry 14 }
|
|
|
|
juniIsisSysCorrLSPs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of corrupted LSPs detected."
|
|
REFERENCE
|
|
"ISIS.aoi corruptedLSPsDetected (19)"
|
|
::= { juniIsisSysEntry 15 }
|
|
|
|
juniIsisSysLSPL1DbaseOloads OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the LSP L1 database has become overloaded."
|
|
REFERENCE
|
|
"ISIS.aoi lSPL1DatabaseOverloads (20)"
|
|
::= { juniIsisSysEntry 16 }
|
|
|
|
juniIsisSysManAddrDropFromAreas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a manual address has been dropped from the area."
|
|
REFERENCE
|
|
"ISIS.aoi manualAddressesDroppedFromArea (21)"
|
|
::= { juniIsisSysEntry 17 }
|
|
|
|
juniIsisSysAttmptToExMaxSeqNums OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the IS has attempted to exceed the maximum sequence
|
|
number."
|
|
REFERENCE
|
|
"ISIS.aoi attemptsToExceedmaximumSequenceNumber (22)"
|
|
::= { juniIsisSysEntry 18 }
|
|
|
|
juniIsisSysSeqNumSkips OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a sequence number skip has occurred."
|
|
REFERENCE
|
|
"ISIS.aoi sequenceNumberSkips (23)"
|
|
::= { juniIsisSysEntry 19 }
|
|
|
|
juniIsisSysOwnLSPPurges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a zero-aged copy of the system's own LSP is received
|
|
from some other node."
|
|
REFERENCE
|
|
"ISIS.aoi ownLSPPurges (24)"
|
|
::= { juniIsisSysEntry 20 }
|
|
|
|
juniIsisSysIDFieldLenMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a PDU is received with a different value for ID field
|
|
length to that of the receiving system."
|
|
REFERENCE
|
|
"ISIS.aoi iDFieldLengthMismatches (25)"
|
|
::= { juniIsisSysEntry 21 }
|
|
|
|
juniIsisSysMaxAreaAddrMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a PDU is received with a different value for
|
|
MaximumAreaAddresses from that of the receiving system."
|
|
REFERENCE
|
|
"ISIS.aoi MaximumAreaAddressesMismatches (118)"
|
|
::= { juniIsisSysEntry 22 }
|
|
|
|
-- The following objects map those from the cLNSISISLevel2-P Package
|
|
|
|
juniIsisSysOrigL2LSPBuffSize OBJECT-TYPE
|
|
SYNTAX LSPBuffSize
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The maximum size of Level 2 LSPs and SNPs originated by this system.
|
|
This object follows the replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi originatingL2LSPBufferSize (26)"
|
|
DEFVAL { 1497 }
|
|
::= { juniIsisSysEntry 23 }
|
|
|
|
juniIsisSysL2State OBJECT-TYPE
|
|
SYNTAX LevelState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the Level 2 database."
|
|
REFERENCE
|
|
"ISIS.aoi l2State (28)"
|
|
::= { juniIsisSysEntry 24 }
|
|
|
|
juniIsisSysLSPL2DbaseOloads OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Level 2 LSP database has become overloaded."
|
|
REFERENCE
|
|
"ISIS.aoi lSPL2DatabaseOverloads (32)"
|
|
::= { juniIsisSysEntry 25 }
|
|
|
|
juniIsisSysAuthFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of authentication failures recognized by this instance of
|
|
the protocol."
|
|
::= { juniIsisSysEntry 26 }
|
|
|
|
juniIsisSysLSPIgnoreErrors OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, allow the router to ignore IS-IS link state packets (LSPs)
|
|
that are received with internal checksum errors rather than purging the
|
|
LSPs."
|
|
DEFVAL { true }
|
|
::= { juniIsisSysEntry 27 }
|
|
|
|
juniIsisSysMaxAreaCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When on, enables checking of maximum area addresses per IS version of
|
|
ISO10589."
|
|
DEFVAL { true }
|
|
::= { juniIsisSysEntry 28 }
|
|
|
|
juniIsisSysSetOverloadBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Isis overload bit"
|
|
DEFVAL { false }
|
|
::= { juniIsisSysEntry 29 }
|
|
|
|
juniIsisSysSetOverloadBitStartupDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (0|5..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Specifies the length in time of seconds to set the overload bit from
|
|
startup. This object must be set together with
|
|
juniIsisSysSetOverloadBit, otherwise the agent will return zero.
|
|
Zero value for this object implies that the overload bit is not set.
|
|
Zero value does not have any meaning for this object."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysEntry 30 }
|
|
|
|
juniIsisSysMaxLspLifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum time (in seconds) a LSP will remain in the box
|
|
without being refreshed before being considered invalid."
|
|
DEFVAL { 1200 }
|
|
::= { juniIsisSysEntry 31 }
|
|
|
|
juniIsisSysL1SpfInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between level 1 SPF calculations."
|
|
DEFVAL { 5 }
|
|
::= { juniIsisSysEntry 32 }
|
|
|
|
juniIsisSysL2SpfInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between level 2 SPF calculations."
|
|
DEFVAL { 5 }
|
|
::= { juniIsisSysEntry 33 }
|
|
|
|
juniIsisSysIshHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify a holdtime advertised in ESH/ISH PDUs."
|
|
DEFVAL { 30 }
|
|
::= { juniIsisSysEntry 34 }
|
|
|
|
juniIsisSysIshConfigTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the rate of transmission for ESH and ISH packets."
|
|
DEFVAL { 10 }
|
|
::= { juniIsisSysEntry 35 }
|
|
|
|
juniIsisSysDistributeDomainWide OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When on, enables distribution of prefixes throughout a multi-level
|
|
domain."
|
|
DEFVAL { false }
|
|
::= { juniIsisSysEntry 36 }
|
|
|
|
juniIsisSysDistance OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The weight applied to IS-IS routes."
|
|
DEFVAL { 115 }
|
|
::= { juniIsisSysEntry 37 }
|
|
|
|
juniIsisSysL1MetricStyle OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
juniIsisMetricStyleNarrow(2),
|
|
juniIsisMetricStyleNarrowTransition(3),
|
|
juniIsisMetricStyleTransition(4),
|
|
juniIsisMetricStyleWide(5),
|
|
juniIsisMetricStyleWideTransition(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of IP reachability TLV to advertise in level 1
|
|
LSPs."
|
|
DEFVAL { juniIsisMetricStyleNarrow }
|
|
::= { juniIsisSysEntry 38 }
|
|
|
|
juniIsisSysL2MetricStyle OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
juniIsisMetricStyleNarrow(2),
|
|
juniIsisMetricStyleNarrowTransition(3),
|
|
juniIsisMetricStyleTransition(4),
|
|
juniIsisMetricStyleWide(5),
|
|
juniIsisMetricStyleWideTransition(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of IP reachability TLV to advertise in level 2
|
|
LSPs."
|
|
DEFVAL { juniIsisMetricStyleNarrow }
|
|
::= { juniIsisSysEntry 39 }
|
|
|
|
juniIsisSysIsoRouteTag OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..19))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISO routing area tag."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysEntry 40 }
|
|
|
|
juniIsisSysMplsTeLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
levelNone(0),
|
|
level1(1),
|
|
level2(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select flooding of MPLS traffic engineering link information into the
|
|
specified ISIS level."
|
|
::= { juniIsisSysEntry 41 }
|
|
|
|
juniIsisSysMplsTeRtrIdIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the stable router interface ID to designate it as TE capable.
|
|
A value of zero is used to remove any configured router interface ID."
|
|
::= { juniIsisSysEntry 42 }
|
|
|
|
juniIsisSysMplsTeSpfUseAnyBestPath OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure whether or not to consider spf paths when alternate
|
|
tunnel path exists"
|
|
::= { juniIsisSysEntry 43 }
|
|
|
|
juniIsisSysReferenceBandwidth OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the reference bandwitdth used to calculate the link cost in
|
|
bits per second.If the reference bandwidth is greater than the maximum
|
|
value reportable by this object then this object should report its
|
|
maximum value (4,294,967,295) and juniIsisSysHighReferenceBandwidth must
|
|
be used to report the reference bandwidth. "
|
|
::= { juniIsisSysEntry 44 }
|
|
|
|
juniIsisSysHighReferenceBandwidth OBJECT-TYPE
|
|
SYNTAX Gauge32(1..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the reference bandwitdth in mega bits per second.
|
|
It is used to calculate the link cost."
|
|
::= { juniIsisSysEntry 45 }
|
|
|
|
--
|
|
-- The Level 1 Manual Area Address Table contains the set of area addresses
|
|
-- manually configured for each instance of the Integrated IS-IS protocol.
|
|
-- At least one row in which the value of juniIsisManAreaAddRowStatus is on
|
|
-- must be present for each instance of the protocol when juniIsisSysOperState
|
|
-- is also on for that instance. The maximum number of rows in this table for
|
|
-- each instance of the protocol for which the object
|
|
-- juniIsisManAreaAddrRowStatus has the value on is the value of
|
|
-- maximumAreaAddresses (as defined in ISO 10589) for that instance.
|
|
-- An Attempt to create a new row such that the number of rows with
|
|
-- juniIsisManAreaAddrRowStatus set to on for that protocol instance exceeds
|
|
-- maximumAreaAddresses is rejected.
|
|
--
|
|
juniIsisManAreaAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisManAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of manual area addresses configured on this Intermediate
|
|
System."
|
|
REFERENCE
|
|
"ISIS.aoi manualAreaAddresses (10)"
|
|
::= { juniIsisSystemGroup 2 }
|
|
|
|
juniIsisManAreaAddrEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisManAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one area address manually configured on this
|
|
system."
|
|
INDEX { juniIsisManAreaAddrSysInstance,
|
|
juniIsisManAreaAddr }
|
|
::= { juniIsisManAreaAddrTable 1 }
|
|
|
|
JuniIsisManAreaAddrEntry ::= SEQUENCE {
|
|
juniIsisManAreaAddrSysInstance Integer32,
|
|
juniIsisManAreaAddr OSINSAddress,
|
|
juniIsisManAreaAddrRowStatus RowStatus }
|
|
|
|
juniIsisManAreaAddrSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisManAreaAddrEntry 1 }
|
|
|
|
juniIsisManAreaAddr OBJECT-TYPE
|
|
SYNTAX OSINSAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A manually configured area address for this system. This object
|
|
follows the index behaviour.
|
|
|
|
Note: an index for the entry {1, {49.0001} active} in this table would
|
|
be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an
|
|
octet string is part of the OID."
|
|
::= { juniIsisManAreaAddrEntry 2 }
|
|
|
|
juniIsisManAreaAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the juniIsisManAreaAddrEntry. This object follows the
|
|
RowStatus behaviour. If an attempt is made to set this object to the
|
|
value off when the corresponding juniIsisManAreaAddrEntry is the only
|
|
valid entry for this instance and when the corresponding IS-IS instance
|
|
has juniIsisSysOperState set to on then the attempt is rejected."
|
|
DEFVAL { active }
|
|
::= { juniIsisManAreaAddrEntry 3 }
|
|
|
|
|
|
--
|
|
-- The System Integrated Group
|
|
--
|
|
-- The System Integrated Group is present if the system supports Integrated ISIS
|
|
-- at Level 1.
|
|
--
|
|
-- The System Protocol Supported Table
|
|
--
|
|
-- The System Protocol Supported Table contains the manually configured set of
|
|
-- protocols supported by each instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysProtSuppTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysProtSuppEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of protocols supported
|
|
by each instance of the Integrated ISIS protocol."
|
|
::= { juniIsisSystemGroup 3 }
|
|
|
|
juniIsisSysProtSuppEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysProtSuppEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one protocol supported by an instance of the
|
|
Integrated ISIS protocol."
|
|
INDEX { juniIsisSysProtSuppSysInstance,
|
|
juniIsisSysProtSuppProtocol }
|
|
::= { juniIsisSysProtSuppTable 1 }
|
|
|
|
JuniIsisSysProtSuppEntry ::= SEQUENCE {
|
|
juniIsisSysProtSuppSysInstance Integer32,
|
|
juniIsisSysProtSuppProtocol SupportedProtocol,
|
|
juniIsisSysProtSuppRowStatus RowStatus }
|
|
|
|
juniIsisSysProtSuppSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysProtSuppEntry 1 }
|
|
|
|
juniIsisSysProtSuppProtocol OBJECT-TYPE
|
|
SYNTAX SupportedProtocol
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One supported protocol. This object follows the index behaviour."
|
|
::= { juniIsisSysProtSuppEntry 2 }
|
|
|
|
juniIsisSysProtSuppRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the juniIsisSysProtSuppEntry. This object follows the
|
|
RowStatus behavior."
|
|
DEFVAL { active }
|
|
::= { juniIsisSysProtSuppEntry 3 }
|
|
|
|
|
|
--
|
|
-- The Summary Address Table
|
|
--
|
|
-- The Summary Address Table contains the set of summary addresses manually
|
|
-- configured for each instance of IP Integrated ISIS on the system.
|
|
--
|
|
juniIsisSummAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSummAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of IP summary addresses to use in forming the contents of Level
|
|
2 LSPs originated by this level 2 Intermediate System."
|
|
::= { juniIsisSystemGroup 4 }
|
|
|
|
juniIsisSummAddrEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSummAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one IP summary address."
|
|
INDEX { juniIsisSummAddrSysInstance,
|
|
juniIsisSummAddress,
|
|
juniIsisSummAddrMask }
|
|
::= { juniIsisSummAddrTable 1 }
|
|
|
|
JuniIsisSummAddrEntry ::= SEQUENCE {
|
|
juniIsisSummAddrSysInstance Integer32,
|
|
juniIsisSummAddress IpAddress,
|
|
juniIsisSummAddrMask IpAddress,
|
|
juniIsisSummAddrRowStatus RowStatus,
|
|
juniIsisSummAddrOperState OperState,
|
|
juniIsisSummAddrDefaultMetric Integer32,
|
|
juniIsisSummAddrDelayMetric OtherMetric,
|
|
juniIsisSummAddrExpenseMetric OtherMetric,
|
|
juniIsisSummAddrErrorMetric OtherMetric,
|
|
juniIsisSummLevel INTEGER }
|
|
|
|
juniIsisSummAddrSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviours."
|
|
::= { juniIsisSummAddrEntry 1 }
|
|
|
|
juniIsisSummAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address value for this summary address. This object follows the
|
|
index behaviour."
|
|
::= { juniIsisSummAddrEntry 2 }
|
|
|
|
juniIsisSummAddrMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask value for this summary address. This object follows the index
|
|
behaviour."
|
|
::= { juniIsisSummAddrEntry 3 }
|
|
|
|
juniIsisSummAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this summary address. This object follows the
|
|
RowStatus behaviour."
|
|
::= { juniIsisSummAddrEntry 4 }
|
|
|
|
juniIsisSummAddrOperState OBJECT-TYPE
|
|
SYNTAX OperState
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of this entry. This object follows the
|
|
operationalState behaviour. When the operational state changes if this
|
|
would cause the contents of LSPs originated by the system to change then
|
|
those new LSPs must be generated and sent as soon as is permitted by the
|
|
ISIS protocol."
|
|
::= { juniIsisSummAddrEntry 5 }
|
|
|
|
juniIsisSummAddrDefaultMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777214)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The default metric value to announce this summary address with in Level
|
|
1 or 2 LSPs generated by this system. A Metric value of 0 indicates to
|
|
use the lowest metric value amongst the routes being summarized. When
|
|
advertising a metric value into a narrow domain
|
|
(juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to
|
|
juniIsisMetricStyleNarrow) the value will be truncated to 63."
|
|
::= { juniIsisSummAddrEntry 6 }
|
|
|
|
juniIsisSummAddrDelayMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delay metric value to announce this summary address with in Level 2
|
|
LSPs generated by this system. The value of zero is reserved to
|
|
indicate that this metric is not supported."
|
|
::= { juniIsisSummAddrEntry 7 }
|
|
|
|
juniIsisSummAddrExpenseMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expense metric value to announce this summary address with in Level
|
|
2 LSPs generated by this system. The value of zero is reserved to
|
|
indicate that this metric is not supported."
|
|
::= { juniIsisSummAddrEntry 8 }
|
|
|
|
juniIsisSummAddrErrorMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error metric value to announce this summary address with in Level n
|
|
LSPs generated by this system. The value of zero is reserved to
|
|
indicate that this metric is not supported."
|
|
::= { juniIsisSummAddrEntry 9 }
|
|
|
|
juniIsisSummLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level1IS(1),
|
|
level2IS(2),
|
|
level1l2IS(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level of database at which to annouce this summary."
|
|
::= { juniIsisSummAddrEntry 10 }
|
|
|
|
--
|
|
-- The Circuit Group
|
|
--
|
|
-- The Circuit Group is current
|
|
--
|
|
-- The Circuit Table
|
|
-- Each broadcast or point-to-point interface on the system corresponds to one
|
|
-- entry in the Circuit table.
|
|
--
|
|
juniIsisCircTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisCircEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of circuits used by each instance of Integrated IS-IS on this
|
|
system."
|
|
::= { juniIsisCircuitGroup 1 }
|
|
|
|
juniIsisCircEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisCircEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An juniIsisCircEntry exists for each circuit used by Integrated IS-IS
|
|
on this system."
|
|
INDEX { juniIsisCircSysInstance,
|
|
juniIsisCircIfIndex }
|
|
::= { juniIsisCircTable 1 }
|
|
|
|
JuniIsisCircEntry ::= SEQUENCE {
|
|
juniIsisCircSysInstance Integer32,
|
|
juniIsisCircIfIndex Integer32,
|
|
juniIsisCircLocalID Integer32,
|
|
juniIsisCircOperState OperState,
|
|
juniIsisCircRowStatus RowStatus,
|
|
juniIsisCircType INTEGER,
|
|
juniIsisCircL1DefaultMetric JuniDefaultMetric,
|
|
juniIsisCircL1DelayMetric OtherMetric,
|
|
juniIsisCircL1ExpenseMetric OtherMetric,
|
|
juniIsisCircL1ErrorMetric OtherMetric,
|
|
juniIsisCircExtDomain TruthValue,
|
|
juniIsisCircAdjChanges Counter32,
|
|
juniIsisCircInitFails Counter32,
|
|
juniIsisCircRejAdjs Counter32,
|
|
juniIsisCircOutCtrlPDUs Counter32,
|
|
juniIsisCircInCtrlPDUs Counter32,
|
|
juniIsisCircIDFieldLenMismatches Counter32,
|
|
juniIsisCircL2DefaultMetric JuniDefaultMetric,
|
|
juniIsisCircL2DelayMetric OtherMetric,
|
|
juniIsisCircL2ExpenseMetric OtherMetric,
|
|
juniIsisCircL2ErrorMetric OtherMetric,
|
|
juniIsisCircManL2Only TruthValue,
|
|
juniIsisCircL1ISPriority ISPriority,
|
|
juniIsisCircL1CircID CircuitID,
|
|
juniIsisCircL1DesIS SystemID,
|
|
juniIsisCircLANL1DesISChanges Counter32,
|
|
juniIsisCircL2ISPriority ISPriority,
|
|
juniIsisCircL2CircID CircuitID,
|
|
juniIsisCircL2DesIS SystemID,
|
|
juniIsisCircLANL2DesISChanges Counter32,
|
|
juniIsisCircMCAddr INTEGER,
|
|
juniIsisCircPtToPtCircID CircuitID,
|
|
juniIsisCircL1HelloTimer Integer32,
|
|
juniIsisCircL2HelloTimer Integer32,
|
|
juniIsisCircL1HelloMultiplier Integer32,
|
|
juniIsisCircL2HelloMultiplier Integer32,
|
|
juniIsisCircMinLSPTransInt Unsigned32,
|
|
juniIsisCircMinLSPReTransInt Integer32,
|
|
juniIsisCircL1CSNPInterval Integer32,
|
|
juniIsisCircL2CSNPInterval Integer32,
|
|
juniIsisCircLSPThrottle Integer32,
|
|
juniIsisCircMeshGroupEnabled INTEGER,
|
|
juniIsisCircMeshGroup Unsigned32,
|
|
juniIsisCircLevel INTEGER,
|
|
juniIsisCircState INTEGER }
|
|
|
|
juniIsisCircSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisCircEntry 1 }
|
|
|
|
juniIsisCircIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this circuit
|
|
corresponds."
|
|
::= { juniIsisCircEntry 2 }
|
|
|
|
juniIsisCircLocalID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identification that can be used in protocol packets to identify a
|
|
circuit. Implementations may devise ways to assure that this value is
|
|
suitable for the circuit it is used on. LAN packets only have space for
|
|
8 bits.
|
|
|
|
Values of juniIsisCircLocalID do not need to be unique. They are only
|
|
required to differ on LANs where the Intermediate System is the
|
|
Designated Intermediate System."
|
|
::= { juniIsisCircEntry 3 }
|
|
|
|
juniIsisCircOperState OBJECT-TYPE
|
|
SYNTAX OperState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of the circuit. This object follows the
|
|
operationalState behaviour."
|
|
DEFVAL { off }
|
|
::= { juniIsisCircEntry 4 }
|
|
|
|
juniIsisCircRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this circuit. This object follows the RowStatus
|
|
behaviour."
|
|
DEFVAL { active }
|
|
::= { juniIsisCircEntry 5 }
|
|
|
|
juniIsisCircType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast(1),
|
|
ptToPt(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the circuit. This object follows the
|
|
replaceOnlyWhileDisabled behaviour. The type specified must be
|
|
compatible with the type of the interface defined by the value of
|
|
juniIsisCircIfIndex."
|
|
REFERENCE
|
|
"ISIS.aoi type (33)"
|
|
::= { juniIsisCircEntry 6 }
|
|
|
|
juniIsisCircL1DefaultMetric OBJECT-TYPE
|
|
SYNTAX JuniDefaultMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default metric value of this circuit for Level 1 traffic."
|
|
REFERENCE
|
|
"ISIS.aoi l1DefaultMetric (35)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 7 }
|
|
|
|
juniIsisCircL1DelayMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delay metric value of this circuit for Level 1 traffic. The value
|
|
of zero is reserved to indicate that this metric is not supported."
|
|
REFERENCE
|
|
"ISIS.aoi l1DelayMetric (36)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 8 }
|
|
|
|
juniIsisCircL1ExpenseMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expense metric value of this circuit for Level 1 traffic. The
|
|
value of zero is reserved to indicate that this metric is not
|
|
supported."
|
|
REFERENCE
|
|
"ISIS.aoi l1ExpenseMetric (37)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 9 }
|
|
|
|
juniIsisCircL1ErrorMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error metric value of this circuit for Level 1 traffic. The value
|
|
of zero is reserved to indicate that this metric is not supported."
|
|
REFERENCE
|
|
"ISIS.aoi l1ErrorMetric (38)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 10 }
|
|
|
|
juniIsisCircExtDomain OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, suppress normal transmission of and interpretation of
|
|
Intra-domain ISIS PDUs on this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi externalDomain (46)"
|
|
DEFVAL { false }
|
|
::= { juniIsisCircEntry 11 }
|
|
|
|
juniIsisCircAdjChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an adjacency state change has occurred on this
|
|
circuit."
|
|
REFERENCE
|
|
"ISIS.aoi changesInAdjacencyState (40)"
|
|
::= { juniIsisCircEntry 12 }
|
|
|
|
juniIsisCircInitFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times initialization of this circuit has failed."
|
|
REFERENCE
|
|
"ISIS.aoi initializationFailures (41)"
|
|
::= { juniIsisCircEntry 13 }
|
|
|
|
juniIsisCircRejAdjs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an adjacency has been rejected on this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi rejectedAdjacencies (42)"
|
|
::= { juniIsisCircEntry 14 }
|
|
|
|
juniIsisCircOutCtrlPDUs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IS-IS control PDUs sent on this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi iSISControlPDUsSent (43)"
|
|
::= { juniIsisCircEntry 15 }
|
|
|
|
juniIsisCircInCtrlPDUs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IS-IS control PDUs received on this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi controlPDUsReceived (44)"
|
|
::= { juniIsisCircEntry 16 }
|
|
|
|
juniIsisCircIDFieldLenMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an IS-IS control PDU with an ID field length
|
|
different to that for this system has been received."
|
|
REFERENCE
|
|
"ISIS.aoi iDFieldLengthMismatches (25)"
|
|
::= { juniIsisCircEntry 17 }
|
|
|
|
|
|
--
|
|
-- The following objects map those from the linkageISISLevel2-P package
|
|
--
|
|
juniIsisCircL2DefaultMetric OBJECT-TYPE
|
|
SYNTAX JuniDefaultMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default metric value of this circuit for level 2 traffic."
|
|
REFERENCE
|
|
"ISIS.aoi l2DefaultMetric (68)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 18 }
|
|
|
|
juniIsisCircL2DelayMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delay metric value of this circuit for level 2 traffic. The value
|
|
of zero is reserved to indicate that this metric is not supported."
|
|
REFERENCE
|
|
"ISIS.aoi l2DelayMetric (69)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 19 }
|
|
|
|
juniIsisCircL2ExpenseMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expense metric value of this circuit for level 2 traffic. The
|
|
value of zero is reserved to indicate that this metric is not
|
|
supported."
|
|
REFERENCE
|
|
"ISIS.aoi l2ExpenseMetric (70)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 20 }
|
|
|
|
juniIsisCircL2ErrorMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error metric value of this circuit for level 2 traffic. The value
|
|
of zero is reserved to indicate that this metric is not supported."
|
|
REFERENCE
|
|
"ISIS.aoi l2ErrorMetric (71)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 21 }
|
|
|
|
juniIsisCircManL2Only OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When true, indicates that this circuit is to be used only for level 2.
|
|
This object follows the replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi manualL2OnlyMode (72)"
|
|
DEFVAL { false }
|
|
::= { juniIsisCircEntry 22 }
|
|
|
|
|
|
--
|
|
-- The following objects map those from the linkageISISBroadcast-P package
|
|
--
|
|
juniIsisCircL1ISPriority OBJECT-TYPE
|
|
SYNTAX ISPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for becoming LAN Level 1 Deignated Intermediate System on
|
|
a broadcast circuit."
|
|
REFERENCE
|
|
"ISIS.aoi l1IntermediateSystemPriority (47)"
|
|
DEFVAL { 64 }
|
|
::= { juniIsisCircEntry 23 }
|
|
|
|
juniIsisCircL1CircID OBJECT-TYPE
|
|
SYNTAX CircuitID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LAN ID allocated by the LAN Level 1 Designated Intermediate System.
|
|
Where this system is not aware of the value (because it is not
|
|
participating in the Level 1 Designated Intermediate System election),
|
|
this object has the value which would be proposed for this circuit (i.e.
|
|
the concatenation of the local system ID and the one octet local Circuit
|
|
ID for this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi l1CircuitID (48)"
|
|
::= { juniIsisCircEntry 24 }
|
|
|
|
juniIsisCircL1DesIS OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the LAN Level 1 Designated Intermediate System on this
|
|
circuit. If, for any reason this system is not partaking in the
|
|
relevant Designated Intermediate System election process, then the value
|
|
returned is the zero length OCTET STRING."
|
|
REFERENCE
|
|
"ISIS.aoi l1DesignatedIntermediateSystem (49)"
|
|
::= { juniIsisCircEntry 25 }
|
|
|
|
juniIsisCircLANL1DesISChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the LAN Level 1 Designated Intermediate System has
|
|
changed."
|
|
REFERENCE
|
|
"ISIS.aoi lanL1DesignatedIntermediateSystemChanges (50)"
|
|
::= { juniIsisCircEntry 26 }
|
|
|
|
-- The following objects map those from the linkageISISLevel2Broadcast-P package
|
|
|
|
juniIsisCircL2ISPriority OBJECT-TYPE
|
|
SYNTAX ISPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for becoming LAN level 2 Designated Intermediate System."
|
|
REFERENCE
|
|
"ISIS.aoi l2IntermediateSystemPriority (73)"
|
|
DEFVAL { 64 }
|
|
::= { juniIsisCircEntry 27 }
|
|
|
|
juniIsisCircL2CircID OBJECT-TYPE
|
|
SYNTAX CircuitID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LAN ID allocated by the LAN Level 2 Designated Intermediate System.
|
|
Where this system is not aware of this value (because it is not
|
|
participating in the Level 2 Designated Intermediate System election),
|
|
this object has the value which would be proposed for this circuit
|
|
(i.e. the concatenation of the local system ID and the one octet local
|
|
Circuit ID for this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi l2CircuitID (74)"
|
|
::= { juniIsisCircEntry 28 }
|
|
|
|
juniIsisCircL2DesIS OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the LAN Level 2 Designated Intermediate System on this
|
|
circuit. If, for any reason, this system is not partaking in the
|
|
relevant Designated Intermediate System election process, then the value
|
|
returned is the zero length OCTET STRING."
|
|
REFERENCE
|
|
"ISIS.aoi l2DesignatedIntermediateSystem (75)"
|
|
::= { juniIsisCircEntry 29 }
|
|
|
|
juniIsisCircLANL2DesISChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the LAN Level 2 Designated Intermediate System has
|
|
changed."
|
|
REFERENCE
|
|
"ISIS.aoi lanL2DesignatedIntermediateSystemChanges (76)"
|
|
::= { juniIsisCircEntry 30 }
|
|
|
|
juniIsisCircMCAddr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
group(1),
|
|
functional(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which type of multicast address will be used for sending
|
|
HELLO PDUs on this circuit."
|
|
DEFVAL { group }
|
|
::= { juniIsisCircEntry 31 }
|
|
|
|
juniIsisCircPtToPtCircID OBJECT-TYPE
|
|
SYNTAX CircuitID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the circuit allocated during initialization. If no value has
|
|
been negotiated (either because the adjacency is to an End System, or
|
|
because initialization has not yet successfully completed), this object
|
|
has the value which would be proposed for this circuit (i.e. the
|
|
concatenation of the local system ID and the one octet local Circuit ID
|
|
for this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi ptPtCircuitID (51)"
|
|
::= { juniIsisCircEntry 32 }
|
|
|
|
juniIsisCircL1HelloTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
|
|
networks. It is also used as the period between Hellos on point to
|
|
point circuits. This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi iSISHelloTimer (45)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 33 }
|
|
|
|
juniIsisCircL2HelloTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
|
|
networks. This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi iSISHelloTimer (45)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 34 }
|
|
|
|
juniIsisCircL1HelloMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32 (3..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is multiplied by the corresponding HelloTimer and the result
|
|
in seconds (rounded up) is used as the holding time in transmitted
|
|
hellos, to be used by receivers of hello packets from this IS."
|
|
REFERENCE
|
|
"ISIS.aoi iSISHelloTimer (45)"
|
|
DEFVAL { 3 }
|
|
::= { juniIsisCircEntry 35 }
|
|
|
|
juniIsisCircL2HelloMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32 (3..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is multiplied by the corresponding HelloTimer and the result
|
|
in seconds (rounded up) is used as the holding time in transmitted
|
|
hellos, to be used by receivers of hello packets from this IS"
|
|
REFERENCE
|
|
"ISIS.aoi iSISHelloTimer (45)"
|
|
DEFVAL { 3 }
|
|
::= { juniIsisCircEntry 36 }
|
|
|
|
juniIsisCircMinLSPTransInt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in milliseconds, between transmission of LSPs on a
|
|
circuit. This object follows the resettingTimer behaviour. This timer
|
|
shall be capable of a resolution not coarser than 10 milliseconds."
|
|
REFERENCE
|
|
"ISIS.aoi minimumBroadcastLSPTransmissionInterval (7)"
|
|
DEFVAL { 33 }
|
|
::= { juniIsisCircEntry 37 }
|
|
|
|
juniIsisCircMinLSPReTransInt OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between re-transmission of an Level 1 or
|
|
2 LSP. This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi minimumLSPTransmissionInterval (5)"
|
|
DEFVAL { 5 }
|
|
::= { juniIsisCircEntry 38 }
|
|
|
|
juniIsisCircL1CSNPInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval of time, in seconds, between transmission of Level 1 CSNPs on
|
|
multiaccess networks if this router is the designated router. On
|
|
point-to-point networks the default is to not transmit CSNPs. Hence CSNP
|
|
interval will be 0 for point-to-point networks."
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 39 }
|
|
|
|
juniIsisCircL2CSNPInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval of time, in seconds, between transmission of Level 2 CSNPs on
|
|
multiaccess networks if this router is the designated router. On
|
|
point-to-point networks the default is to not transmit CSNPs. Hence CSNP
|
|
interval will be 0 for point-to-point networks."
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 40 }
|
|
|
|
juniIsisCircLSPThrottle OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimal interval of time, in milliseconds, between retransmissions of
|
|
LSPs on a point to point interface."
|
|
DEFVAL { 33 }
|
|
::= { juniIsisCircEntry 41 }
|
|
|
|
juniIsisCircMeshGroupEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
blocked(2),
|
|
set(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this port a member of a mesh group, or blocked? Circuits in the
|
|
same mesh group act as a virtual multiaccess network. LSPs seen on one
|
|
circuit in a mesh group will not be flooded to another circuit in the
|
|
same mesh group."
|
|
DEFVAL { inactive }
|
|
::= { juniIsisCircEntry 42 }
|
|
|
|
juniIsisCircMeshGroup OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Circuits in the same mesh group act as a virtual multiaccess network.
|
|
LSPs seen on one circuit in a mesh group will not be flooded to another
|
|
circuit in the same mesh group. If juniIsisCircMeshGroupEnabled is
|
|
false, this value is ignored. Default value returned as 0 has no significance
|
|
for this variable."
|
|
::= { juniIsisCircEntry 43 }
|
|
|
|
juniIsisCircLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level1IS(0),
|
|
level1l2IS(1),
|
|
level2Only(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this circuit. This object follows the
|
|
replaceOnlyWhileDisabled behavior."
|
|
REFERENCE
|
|
"ISIS.aoi iSType(2)"
|
|
::= { juniIsisCircEntry 44 }
|
|
|
|
juniIsisCircState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
isisCircuitDown(1),
|
|
isisCircuitUp(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of the circuit."
|
|
::= { juniIsisCircEntry 45 }
|
|
|
|
|
|
juniIsisCircBFDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisCircBFDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Juniper ISIS circuit table describes the BFD-specific
|
|
characteristics of interfaces."
|
|
::= { juniIsisCircuitGroup 4 }
|
|
|
|
juniIsisCircBFDEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisCircBFDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Juniper ISIS circuit table describes the BFD-specific
|
|
characteristics of one interface."
|
|
AUGMENTS { juniIsisCircEntry }
|
|
::= { juniIsisCircBFDTable 1 }
|
|
|
|
JuniIsisCircBFDEntry ::= SEQUENCE {
|
|
juniIsisCircBfdEnable TruthValue,
|
|
juniIsisCircBfdMinRxInterval Integer32,
|
|
juniIsisCircBfdMinTxInterval Integer32,
|
|
juniIsisCircBfdMultiplier Integer32
|
|
}
|
|
|
|
juniIsisCircBfdEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether BFD session on the interface is active or not"
|
|
DEFVAL { false }
|
|
::= { juniIsisCircBFDEntry 1 }
|
|
|
|
juniIsisCircBfdMinRxInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (100..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies upper-limit on rate local-system requires remote-system to
|
|
transmit bfd control-packets [milliseconds]"
|
|
DEFVAL { 300 }
|
|
::= { juniIsisCircBFDEntry 2 }
|
|
|
|
juniIsisCircBfdMinTxInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (100..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies lower-limit on rate local-system requires remote-system to
|
|
transmit bfd control-packets [milliseconds]"
|
|
DEFVAL { 300 }
|
|
::= { juniIsisCircBFDEntry 3 }
|
|
|
|
juniIsisCircBfdMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies detection-multiplier "
|
|
DEFVAL { 3 }
|
|
::= { juniIsisCircBFDEntry 4 }
|
|
--
|
|
-- The System Host Name Table
|
|
--
|
|
-- The System Host Name Table contains a manually configured set of host to
|
|
-- system ID aliases supported by each instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysHostNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysHostNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of host name to system
|
|
ID aliases supported by each instance of the Integrated ISIS protocol."
|
|
::= { juniIsisSystemGroup 5 }
|
|
|
|
juniIsisSysHostNameEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysHostNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one name to system ID alias supported by an
|
|
instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysHostNameSysInstance,
|
|
juniIsisSysHostNameSysId }
|
|
::= { juniIsisSysHostNameTable 1 }
|
|
|
|
JuniIsisSysHostNameEntry ::= SEQUENCE {
|
|
juniIsisSysHostNameSysInstance Integer32,
|
|
juniIsisSysHostNameSysId SystemID,
|
|
juniIsisSysHostNameAreaAddr OSINSAddress,
|
|
juniIsisSysHostNameName OCTET STRING,
|
|
juniIsisSysHostNameType INTEGER,
|
|
juniIsisSysHostNameRowStatus RowStatus }
|
|
|
|
juniIsisSysHostNameSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysHostNameEntry 1 }
|
|
|
|
juniIsisSysHostNameSysId OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for the system which this name will be assigned."
|
|
::= { juniIsisSysHostNameEntry 2 }
|
|
|
|
juniIsisSysHostNameAreaAddr OBJECT-TYPE
|
|
SYNTAX OSINSAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A configured area address for the system which this name will be
|
|
assigned. This object follows the index behaviour.
|
|
|
|
Note: an index for the entry {1, {49.0001} active} in this table would
|
|
be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an
|
|
Octet string is part of the OID."
|
|
::= { juniIsisSysHostNameEntry 3 }
|
|
|
|
juniIsisSysHostNameName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string to use when displaying system data with this system ID."
|
|
::= { juniIsisSysHostNameEntry 4 }
|
|
|
|
juniIsisSysHostNameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hostNameTypeStatic(1),
|
|
hostNameTypeDynamic(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of host name entry."
|
|
::= { juniIsisSysHostNameEntry 5 }
|
|
|
|
juniIsisSysHostNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this host name entry. This object follows the RowStatus
|
|
behaviour."
|
|
::= { juniIsisSysHostNameEntry 6 }
|
|
|
|
|
|
--
|
|
-- The Area Authentication Table
|
|
--
|
|
-- The Area Authentication Table contains the manually configured set of
|
|
-- authentication keys used to authenticate Level 1 LSPs and SNPs in each
|
|
-- instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysAreaAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysAreaAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of area authentication
|
|
keys supported by each instance of the Integrated ISIS protocol."
|
|
::= { juniIsisSystemGroup 6 }
|
|
|
|
juniIsisSysAreaAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysAreaAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one area authentication key supported by an
|
|
instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysAreaAuthenticationSysInstance,
|
|
juniIsisSysAreaAuthenticationKeyId }
|
|
::= { juniIsisSysAreaAuthenticationTable 1 }
|
|
|
|
JuniIsisSysAreaAuthenticationEntry ::= SEQUENCE {
|
|
juniIsisSysAreaAuthenticationSysInstance Integer32,
|
|
juniIsisSysAreaAuthenticationKeyId Integer32,
|
|
juniIsisSysAreaAuthenticationPwd OCTET STRING,
|
|
juniIsisSysAreaAuthenticationKeyType INTEGER,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime AuthTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime AuthTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime AuthTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime AuthTime,
|
|
juniIsisSysAreaAuthenticationRowStatus RowStatus }
|
|
|
|
juniIsisSysAreaAuthenticationSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysAreaAuthenticationEntry 1 }
|
|
|
|
juniIsisSysAreaAuthenticationKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the instance to which this row corresponds.
|
|
This object follows the index behaviour."
|
|
::= { juniIsisSysAreaAuthenticationEntry 2 }
|
|
|
|
juniIsisSysAreaAuthenticationPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key in Level 1 Link State
|
|
Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a
|
|
value of plaintext or hmacMd5. A modification of
|
|
juniIsisSysAreaAuthenticationKeyType does not modify the
|
|
juniIsisSysAreaAuthenticationPwd value.
|
|
|
|
Reading this object always results in an OCTET STRING of length zero;
|
|
authentication may not be bypassed by reading the MIB object."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysAreaAuthenticationEntry 3 }
|
|
|
|
juniIsisSysAreaAuthenticationKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
plaintext(1),
|
|
hmacMd5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What authentication scheme, if any, is used to protect Level 1 Link
|
|
State packets and sequence number packets"
|
|
DEFVAL { hmacMd5 }
|
|
::= { juniIsisSysAreaAuthenticationEntry 4 }
|
|
|
|
juniIsisSysAreaAuthenticationStartAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
validate level 1 LSPs and SNPs received. The Default value the start
|
|
accept time will be the current time when the key was created"
|
|
::= { juniIsisSysAreaAuthenticationEntry 5 }
|
|
|
|
juniIsisSysAreaAuthenticationStartGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
authenticate level 1 LSPs and SNPs transmitted. The Default value the
|
|
start accept time will be the current time when the key was created + 2
|
|
minutes"
|
|
::= { juniIsisSysAreaAuthenticationEntry 6 }
|
|
|
|
juniIsisSysAreaAuthenticationStopAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being accepted
|
|
as a valid level 1 LSP and SNP key received. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysAreaAuthenticationEntry 7 }
|
|
|
|
juniIsisSysAreaAuthenticationStopGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being used to
|
|
authenticate level 1 LSPs and SNPs transmitted. A value of zero
|
|
indicates the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysAreaAuthenticationEntry 8 }
|
|
|
|
juniIsisSysAreaAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this authentication key. This object follows
|
|
the RowStatus behaviour."
|
|
::= { juniIsisSysAreaAuthenticationEntry 9 }
|
|
|
|
-- The Domain Authentication Table
|
|
|
|
-- The Domain Authentication Table contains the manually configured set of
|
|
-- authentication keys used to authenticate Level 2 LSPs and SNPs in each
|
|
-- instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysDomainAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysDomainAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of domain
|
|
authentication keys supported by each instance of the Integrated ISIS
|
|
protocol."
|
|
::= { juniIsisSystemGroup 7 }
|
|
|
|
juniIsisSysDomainAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysDomainAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one domain authentication key supported by an
|
|
instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysDomainAuthenticationSysInstance,
|
|
juniIsisSysDomainAuthenticationKeyId }
|
|
::= { juniIsisSysDomainAuthenticationTable 1 }
|
|
|
|
JuniIsisSysDomainAuthenticationEntry ::= SEQUENCE {
|
|
juniIsisSysDomainAuthenticationSysInstance Integer32,
|
|
juniIsisSysDomainAuthenticationKeyId Integer32,
|
|
juniIsisSysDomainAuthenticationPwd OCTET STRING,
|
|
juniIsisSysDomainAuthenticationKeyType INTEGER,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime AuthTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime AuthTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime AuthTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime AuthTime,
|
|
juniIsisSysDomainAuthenticationRowStatus RowStatus }
|
|
|
|
juniIsisSysDomainAuthenticationSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysDomainAuthenticationEntry 1 }
|
|
|
|
juniIsisSysDomainAuthenticationKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the instance to which this row corresponds.
|
|
This object follows the index behaviour."
|
|
::= { juniIsisSysDomainAuthenticationEntry 2 }
|
|
|
|
juniIsisSysDomainAuthenticationPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key in Level 2 Link State
|
|
Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has
|
|
a value of plaintext or hmacMd5. A modification of
|
|
juniIsisSysDomainAuthenticationKeyType does not modify the
|
|
juniIsisSysDomainAuthenticationPwd value.
|
|
|
|
Reading this object always results in an OCTET STRING of length zero;
|
|
authentication may not be bypassed by reading the MIB object."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysDomainAuthenticationEntry 3 }
|
|
|
|
juniIsisSysDomainAuthenticationKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
plaintext(1),
|
|
hmacMd5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What authentication scheme, if any, is used to protect Level 2 Link
|
|
State packets and Sequence Number packets"
|
|
DEFVAL { hmacMd5 }
|
|
::= { juniIsisSysDomainAuthenticationEntry 4 }
|
|
|
|
juniIsisSysDomainAuthenticationStartAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
validate level 2 LSPs and SNPs received. The Default value the start
|
|
accept time will be the current time when the key was created"
|
|
::= { juniIsisSysDomainAuthenticationEntry 5 }
|
|
|
|
juniIsisSysDomainAuthenticationStartGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
authenticate level 2 LSPs and SNPs transmitted. The Default value the
|
|
start accept time will be the current time when the key was created + 2
|
|
minutes"
|
|
::= { juniIsisSysDomainAuthenticationEntry 6 }
|
|
|
|
juniIsisSysDomainAuthenticationStopAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being accepted
|
|
as a valid level 2 LSP and SNP key received. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysDomainAuthenticationEntry 7 }
|
|
|
|
juniIsisSysDomainAuthenticationStopGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being used to
|
|
authenticate level 2 LSPs and SNPs transmitted. A value of zero
|
|
indicates the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysDomainAuthenticationEntry 8 }
|
|
|
|
juniIsisSysDomainAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this authentication key. This object follows
|
|
the RowStatus behaviour."
|
|
::= { juniIsisSysDomainAuthenticationEntry 9 }
|
|
|
|
|
|
--
|
|
-- The Level 1 Circuit Authentication Table
|
|
--
|
|
-- The Level 1 Circuit Authentication Table contains the manually configured
|
|
-- set of authentication keys used to authenticate Level 1 hello packets in each
|
|
-- instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysL1CircAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysL1CircAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of Level 1 Circuit
|
|
authentication keys supported by each instance of the Integrated ISIS
|
|
protocol."
|
|
::= { juniIsisCircuitGroup 2 }
|
|
|
|
juniIsisSysL1CircAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysL1CircAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one Level 1 circuit authentication key supported by
|
|
an instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysL1CircAuthenticationSysInstance,
|
|
juniIsisSysL1CircAuthenticationIfIndex,
|
|
juniIsisSysL1CircAuthenticationKeyId }
|
|
::= { juniIsisSysL1CircAuthenticationTable 1 }
|
|
|
|
JuniIsisSysL1CircAuthenticationEntry ::= SEQUENCE {
|
|
juniIsisSysL1CircAuthenticationSysInstance Integer32,
|
|
juniIsisSysL1CircAuthenticationIfIndex Integer32,
|
|
juniIsisSysL1CircAuthenticationKeyId Integer32,
|
|
juniIsisSysL1CircAuthenticationPwd OCTET STRING,
|
|
juniIsisSysL1CircAuthenticationKeyType INTEGER,
|
|
juniIsisSysL1CircAuthenticationStartAcceptTime AuthTime,
|
|
juniIsisSysL1CircAuthenticationStartGenerateTime AuthTime,
|
|
juniIsisSysL1CircAuthenticationStopAcceptTime AuthTime,
|
|
juniIsisSysL1CircAuthenticationStopGenerateTime AuthTime,
|
|
juniIsisSysL1CircAuthenticationRowStatus RowStatus }
|
|
|
|
juniIsisSysL1CircAuthenticationSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 1 }
|
|
|
|
juniIsisSysL1CircAuthenticationIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this circuit
|
|
corresponds."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 2 }
|
|
|
|
juniIsisSysL1CircAuthenticationKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the instance to which this row corresponds.
|
|
This object follows the index behaviour."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 3 }
|
|
|
|
juniIsisSysL1CircAuthenticationPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key in Level 1 Hello Packets
|
|
whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value
|
|
of hmacMd5. A modification of juniIsisSysL1CircAuthenticationKeyType
|
|
does not modify the juniIsisSysL1CircAuthenticationPwd value.
|
|
|
|
Reading this object always results in an OCTET STRING of length zero;
|
|
authentication may not be bypassed by reading the MIB object."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysL1CircAuthenticationEntry 4 }
|
|
|
|
juniIsisSysL1CircAuthenticationKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
plaintext(1),
|
|
hmacMd5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What authentication scheme, if any, is used to protect Level 1 hello
|
|
packets."
|
|
DEFVAL { hmacMd5 }
|
|
::= { juniIsisSysL1CircAuthenticationEntry 5 }
|
|
|
|
juniIsisSysL1CircAuthenticationStartAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
validate level 1 IIH packets received. The Default value the start
|
|
accept time will be the current time when the key was created."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 6 }
|
|
|
|
juniIsisSysL1CircAuthenticationStartGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
authenticate level 1 IIH packets transmitted. The Default value the
|
|
start accept time will be the current time when the key was created + 2
|
|
minutes."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 7 }
|
|
|
|
juniIsisSysL1CircAuthenticationStopAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being accepted
|
|
as a valid level 1 IIH packets key received. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysL1CircAuthenticationEntry 8 }
|
|
|
|
juniIsisSysL1CircAuthenticationStopGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being used to
|
|
authenticate level 1 IIH packets transmitted. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysL1CircAuthenticationEntry 9 }
|
|
|
|
juniIsisSysL1CircAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this authentication key. This object follows
|
|
the RowStatus behaviour."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 10 }
|
|
|
|
|
|
--
|
|
-- The Level 2 Circuit Authentication Table
|
|
--
|
|
-- The Level 2 Circuit Authentication Table contains the manually configured set
|
|
-- of authentication keys used to authenticate Level 2 hello packets in each
|
|
-- instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysL2CircAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysL2CircAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of Level 2 Circuit
|
|
authentication keys supported by each instance of the Integrated ISIS
|
|
protocol."
|
|
::= { juniIsisCircuitGroup 3 }
|
|
|
|
juniIsisSysL2CircAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysL2CircAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one Level 2 circuit authentication key supported by
|
|
an instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysL2CircAuthenticationSysInstance,
|
|
juniIsisSysL2CircAuthenticationIfIndex,
|
|
juniIsisSysL2CircAuthenticationKeyId }
|
|
::= { juniIsisSysL2CircAuthenticationTable 1 }
|
|
|
|
JuniIsisSysL2CircAuthenticationEntry ::= SEQUENCE {
|
|
juniIsisSysL2CircAuthenticationSysInstance Integer32,
|
|
juniIsisSysL2CircAuthenticationIfIndex Integer32,
|
|
juniIsisSysL2CircAuthenticationKeyId Integer32,
|
|
juniIsisSysL2CircAuthenticationPwd OCTET STRING,
|
|
juniIsisSysL2CircAuthenticationKeyType INTEGER,
|
|
juniIsisSysL2CircAuthenticationStartAcceptTime AuthTime,
|
|
juniIsisSysL2CircAuthenticationStartGenerateTime AuthTime,
|
|
juniIsisSysL2CircAuthenticationStopAcceptTime AuthTime,
|
|
juniIsisSysL2CircAuthenticationStopGenerateTime AuthTime,
|
|
juniIsisSysL2CircAuthenticationRowStatus RowStatus }
|
|
|
|
juniIsisSysL2CircAuthenticationSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 1 }
|
|
|
|
juniIsisSysL2CircAuthenticationIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this circuit
|
|
corresponds."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 2 }
|
|
|
|
juniIsisSysL2CircAuthenticationKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the instance to which this row corresponds.
|
|
This object follows the index behaviour."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 3 }
|
|
juniIsisSysL2CircAuthenticationPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key in Level 2 Hello Packets
|
|
whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value
|
|
of hmacMd5. A modification of juniIsisSysL2CircAuthenticationKeyType
|
|
does not modify the juniIsisSysL2CircAuthenticationPwd value.
|
|
|
|
Reading this object always results in an OCTET STRING of length zero;
|
|
authentication may not be bypassed by reading the MIB object."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 4 }
|
|
|
|
juniIsisSysL2CircAuthenticationKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
plaintext(1),
|
|
hmacMd5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What authentication scheme, if any, is used to protect Level 2 hello
|
|
packets."
|
|
DEFVAL { hmacMd5 }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 5 }
|
|
|
|
juniIsisSysL2CircAuthenticationStartAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
validate level 2 IIH packets received. The Default value the start
|
|
accept time will be the current time when the key was created."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 6 }
|
|
|
|
juniIsisSysL2CircAuthenticationStartGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
authenticate level 2 IIH packets transmitted. The Default value the
|
|
start accept time will be the current time when the key was created + 2
|
|
minutes."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 7 }
|
|
|
|
juniIsisSysL2CircAuthenticationStopAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being accepted
|
|
as a valid level 2 IIH packets key received. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 8 }
|
|
|
|
juniIsisSysL2CircAuthenticationStopGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being used to
|
|
authenticate level 2 IIH packets transmitted. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 9 }
|
|
|
|
juniIsisSysL2CircAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this authentication key. This object follows
|
|
the RowStatus behaviour."
|
|
DEFVAL { active }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 10 }
|
|
|
|
--
|
|
-- The MPLS TE tunnel table contains the set of tunnels exported by MPLS into
|
|
-- ISIS.
|
|
|
|
juniIsisMplsTeTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisMplsTeTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of tunnels imported from MPLS."
|
|
REFERENCE
|
|
"ISIS.aoi mplsTeTunnels(6)"
|
|
::= { juniIsisSystemGroup 8 }
|
|
|
|
juniIsisMplsTeTunnelEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisMplsTeTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains metric details of an MPLS LSP"
|
|
INDEX { juniIsisMplsTeTunnelSysInstance,
|
|
juniIsisMplsNextHopIndex }
|
|
::= { juniIsisMplsTeTunnelTable 1 }
|
|
|
|
JuniIsisMplsTeTunnelEntry ::= SEQUENCE {
|
|
juniIsisMplsTeTunnelSysInstance Integer32,
|
|
juniIsisMplsNextHopIndex Integer32,
|
|
juniIsisMplsTeSystemId SystemID,
|
|
juniIsisMplsTeRouterId IpAddress,
|
|
juniIsisMplsTeTunnelMetric Integer32,
|
|
juniIsisMplsTeTunnelRelMetric Integer32,
|
|
juniIsisMplsTeTunnelName OCTET STRING
|
|
}
|
|
|
|
|
|
juniIsisMplsTeTunnelSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisMplsTeTunnelEntry 1 }
|
|
|
|
juniIsisMplsNextHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to uniquely identify the tunnels."
|
|
::= { juniIsisMplsTeTunnelEntry 2 }
|
|
|
|
juniIsisMplsTeSystemId OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for the instance of the Integrated IS-IS protocol
|
|
running in the tunnel's end point."
|
|
::= { juniIsisMplsTeTunnelEntry 3 }
|
|
|
|
juniIsisMplsTeRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router ID of the tunnel's end point."
|
|
::= { juniIsisMplsTeTunnelEntry 4 }
|
|
|
|
juniIsisMplsTeTunnelMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric associated with the tunnel."
|
|
::= { juniIsisMplsTeTunnelEntry 5 }
|
|
|
|
juniIsisMplsTeTunnelRelMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric associated with the tunnel relative to the spf path."
|
|
::= { juniIsisMplsTeTunnelEntry 6 }
|
|
|
|
juniIsisMplsTeTunnelName OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE (1..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name associated with the tunnel."
|
|
::= { juniIsisMplsTeTunnelEntry 7 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniIsisCompliances OBJECT IDENTIFIER ::= { juniIsisConformance 1 }
|
|
juniIsisMIBGroups OBJECT IDENTIFIER ::= { juniIsisConformance 2 }
|
|
|
|
--
|
|
-- Compliance Statements
|
|
--
|
|
juniIsisCompliance MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for systems supporting ISIS
|
|
functionality. This statement became obsolete when the
|
|
juniIsisCircState object was added."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup,
|
|
juniIsisCircuitMgmtGroup }
|
|
::= { juniIsisCompliances 1 } -- JUNOSe 2.0
|
|
|
|
juniIsisCompliance2 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for systems supporting ISIS
|
|
functionality. This statement became obsolete when MPSL support was
|
|
added."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup,
|
|
juniIsisCircuitMgmtGroup2 }
|
|
::= { juniIsisCompliances 2 } -- JUNOSe 3.0
|
|
|
|
juniIsisCompliance3 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting ISIS functionality. This
|
|
statement became obsolete when juniIsisCircBFDTable is implemented."
|
|
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup2,
|
|
juniIsisCircuitMgmtGroup2 }
|
|
::= { juniIsisCompliances 3 } -- JUNOSe 4.0
|
|
|
|
juniIsisCompliance4 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting ISIS functionality."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup2,
|
|
juniIsisCircuitMgmtGroup2,
|
|
juniIsisCircBFDGroup }
|
|
::= { juniIsisCompliances 4 }
|
|
juniIsisCompliance5 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting ISIS functionality."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup3,
|
|
juniIsisCircuitMgmtGroup2,
|
|
juniIsisCircBFDGroup }
|
|
::= { juniIsisCompliances 5 }
|
|
|
|
juniIsisCompliance6 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting ISIS functionality."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup4,
|
|
juniIsisCircuitMgmtGroup2,
|
|
juniIsisCircBFDGroup }
|
|
::= { juniIsisCompliances 6 }
|
|
|
|
--
|
|
-- Units of Conformance
|
|
--
|
|
juniIsisSystemMgmtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisSysVersion,
|
|
juniIsisSysType,
|
|
juniIsisSysID,
|
|
juniIsisSysMaxPathSplits,
|
|
juniIsisSysMaxLSPGenInt,
|
|
juniIsisSysOrigLSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses,
|
|
juniIsisSysMinL1LSPGenInt,
|
|
juniIsisSysMinL2LSPGenInt,
|
|
juniIsisSysPollESHelloRate,
|
|
juniIsisSysWaitTime,
|
|
juniIsisSysOperState,
|
|
juniIsisSysL1State,
|
|
juniIsisSysCorrLSPs,
|
|
juniIsisSysLSPL1DbaseOloads,
|
|
juniIsisSysManAddrDropFromAreas,
|
|
juniIsisSysAttmptToExMaxSeqNums,
|
|
juniIsisSysSeqNumSkips,
|
|
juniIsisSysOwnLSPPurges,
|
|
juniIsisSysIDFieldLenMismatches,
|
|
juniIsisSysMaxAreaAddrMismatches,
|
|
juniIsisSysL2State,
|
|
juniIsisSysLSPL2DbaseOloads,
|
|
juniIsisSysAuthFails,
|
|
juniIsisSysLSPIgnoreErrors,
|
|
juniIsisSysMaxAreaCheck,
|
|
juniIsisSysSetOverloadBit,
|
|
juniIsisSysSetOverloadBitStartupDuration,
|
|
juniIsisSysMaxLspLifetime ,
|
|
juniIsisSysL1SpfInterval,
|
|
juniIsisSysL2SpfInterval,
|
|
juniIsisSysIshHoldTime,
|
|
juniIsisSysIshConfigTimer,
|
|
juniIsisSysDistributeDomainWide,
|
|
juniIsisSysDistance,
|
|
juniIsisSysL1MetricStyle,
|
|
juniIsisSysL2MetricStyle,
|
|
juniIsisSysIsoRouteTag,
|
|
juniIsisManAreaAddrRowStatus,
|
|
juniIsisSysProtSuppRowStatus,
|
|
juniIsisSummAddrRowStatus,
|
|
juniIsisSummAddrOperState,
|
|
juniIsisSummAddrDefaultMetric,
|
|
juniIsisSummAddrDelayMetric,
|
|
juniIsisSummAddrExpenseMetric,
|
|
juniIsisSummAddrErrorMetric,
|
|
juniIsisSummLevel,
|
|
juniIsisSysHostNameAreaAddr,
|
|
juniIsisSysHostNameName,
|
|
juniIsisSysHostNameType,
|
|
juniIsisSysHostNameRowStatus,
|
|
juniIsisSysAreaAuthenticationPwd,
|
|
juniIsisSysAreaAuthenticationKeyType,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime,
|
|
juniIsisSysAreaAuthenticationRowStatus,
|
|
juniIsisSysDomainAuthenticationPwd,
|
|
juniIsisSysDomainAuthenticationKeyType,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime,
|
|
juniIsisSysDomainAuthenticationRowStatus }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete system level objects for ISIS management functionality. This
|
|
group became obsolete when the MPLS management objects were added."
|
|
::= { juniIsisMIBGroups 1 }
|
|
|
|
juniIsisCircuitMgmtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisCircLocalID,
|
|
juniIsisCircOperState,
|
|
juniIsisCircRowStatus,
|
|
juniIsisCircType,
|
|
juniIsisCircL1DefaultMetric,
|
|
juniIsisCircL1DelayMetric,
|
|
juniIsisCircL1ExpenseMetric,
|
|
juniIsisCircL1ErrorMetric,
|
|
juniIsisCircExtDomain,
|
|
juniIsisCircAdjChanges,
|
|
juniIsisCircInitFails,
|
|
juniIsisCircRejAdjs,
|
|
juniIsisCircOutCtrlPDUs,
|
|
juniIsisCircInCtrlPDUs,
|
|
juniIsisCircIDFieldLenMismatches,
|
|
juniIsisCircL2DefaultMetric,
|
|
juniIsisCircL2DelayMetric,
|
|
juniIsisCircL2ExpenseMetric,
|
|
juniIsisCircL2ErrorMetric,
|
|
juniIsisCircManL2Only,
|
|
juniIsisCircL1ISPriority,
|
|
juniIsisCircL1CircID,
|
|
juniIsisCircL1DesIS,
|
|
juniIsisCircLANL1DesISChanges,
|
|
juniIsisCircL2ISPriority,
|
|
juniIsisCircL2CircID,
|
|
juniIsisCircL2DesIS,
|
|
juniIsisCircLANL2DesISChanges,
|
|
juniIsisCircMCAddr,
|
|
juniIsisCircPtToPtCircID,
|
|
juniIsisCircL1HelloTimer,
|
|
juniIsisCircL2HelloTimer,
|
|
juniIsisCircL1HelloMultiplier,
|
|
juniIsisCircL2HelloMultiplier,
|
|
juniIsisCircMinLSPTransInt,
|
|
juniIsisCircMinLSPReTransInt,
|
|
juniIsisCircL1CSNPInterval,
|
|
juniIsisCircL2CSNPInterval,
|
|
juniIsisCircLSPThrottle,
|
|
juniIsisCircMeshGroupEnabled,
|
|
juniIsisCircMeshGroup,
|
|
juniIsisCircLevel,
|
|
juniIsisSysL1CircAuthenticationPwd,
|
|
juniIsisSysL1CircAuthenticationKeyType,
|
|
juniIsisSysL1CircAuthenticationStartAcceptTime,
|
|
juniIsisSysL1CircAuthenticationStartGenerateTime,
|
|
juniIsisSysL1CircAuthenticationStopAcceptTime,
|
|
juniIsisSysL1CircAuthenticationStopGenerateTime,
|
|
juniIsisSysL1CircAuthenticationRowStatus,
|
|
juniIsisSysL2CircAuthenticationPwd,
|
|
juniIsisSysL2CircAuthenticationKeyType,
|
|
juniIsisSysL2CircAuthenticationStartAcceptTime,
|
|
juniIsisSysL2CircAuthenticationStartGenerateTime,
|
|
juniIsisSysL2CircAuthenticationStopAcceptTime,
|
|
juniIsisSysL2CircAuthenticationStopGenerateTime,
|
|
juniIsisSysL2CircAuthenticationRowStatus }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete circuit management objects. This group became obsolete when
|
|
the juniIsisCircState object was added."
|
|
::= { juniIsisMIBGroups 2 }
|
|
|
|
juniIsisCircuitMgmtGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisCircLocalID,
|
|
juniIsisCircOperState,
|
|
juniIsisCircRowStatus,
|
|
juniIsisCircType,
|
|
juniIsisCircL1DefaultMetric,
|
|
juniIsisCircL1DelayMetric,
|
|
juniIsisCircL1ExpenseMetric,
|
|
juniIsisCircL1ErrorMetric,
|
|
juniIsisCircExtDomain,
|
|
juniIsisCircAdjChanges,
|
|
juniIsisCircInitFails,
|
|
juniIsisCircRejAdjs,
|
|
juniIsisCircOutCtrlPDUs,
|
|
juniIsisCircInCtrlPDUs,
|
|
juniIsisCircIDFieldLenMismatches,
|
|
juniIsisCircL2DefaultMetric,
|
|
juniIsisCircL2DelayMetric,
|
|
juniIsisCircL2ExpenseMetric,
|
|
juniIsisCircL2ErrorMetric,
|
|
juniIsisCircManL2Only,
|
|
juniIsisCircL1ISPriority,
|
|
juniIsisCircL1CircID,
|
|
juniIsisCircL1DesIS,
|
|
juniIsisCircLANL1DesISChanges,
|
|
juniIsisCircL2ISPriority,
|
|
juniIsisCircL2CircID,
|
|
juniIsisCircL2DesIS,
|
|
juniIsisCircLANL2DesISChanges,
|
|
juniIsisCircMCAddr,
|
|
juniIsisCircPtToPtCircID,
|
|
juniIsisCircL1HelloTimer,
|
|
juniIsisCircL2HelloTimer,
|
|
juniIsisCircL1HelloMultiplier,
|
|
juniIsisCircL2HelloMultiplier,
|
|
juniIsisCircMinLSPTransInt,
|
|
juniIsisCircMinLSPReTransInt,
|
|
juniIsisCircL1CSNPInterval,
|
|
juniIsisCircL2CSNPInterval,
|
|
juniIsisCircLSPThrottle,
|
|
juniIsisCircMeshGroupEnabled,
|
|
juniIsisCircMeshGroup,
|
|
juniIsisCircLevel,
|
|
juniIsisCircState,
|
|
juniIsisSysL1CircAuthenticationPwd,
|
|
juniIsisSysL1CircAuthenticationKeyType,
|
|
juniIsisSysL1CircAuthenticationStartAcceptTime,
|
|
juniIsisSysL1CircAuthenticationStartGenerateTime,
|
|
juniIsisSysL1CircAuthenticationStopAcceptTime,
|
|
juniIsisSysL1CircAuthenticationStopGenerateTime,
|
|
juniIsisSysL1CircAuthenticationRowStatus,
|
|
juniIsisSysL2CircAuthenticationPwd,
|
|
juniIsisSysL2CircAuthenticationKeyType,
|
|
juniIsisSysL2CircAuthenticationStartAcceptTime,
|
|
juniIsisSysL2CircAuthenticationStartGenerateTime,
|
|
juniIsisSysL2CircAuthenticationStopAcceptTime,
|
|
juniIsisSysL2CircAuthenticationStopGenerateTime,
|
|
juniIsisSysL2CircAuthenticationRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The circuit management objects."
|
|
::= { juniIsisMIBGroups 3 }
|
|
|
|
juniIsisSystemMgmtGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisSysVersion,
|
|
juniIsisSysType,
|
|
juniIsisSysID,
|
|
juniIsisSysMaxPathSplits,
|
|
juniIsisSysMaxLSPGenInt,
|
|
juniIsisSysOrigLSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses,
|
|
juniIsisSysMinL1LSPGenInt,
|
|
juniIsisSysMinL2LSPGenInt,
|
|
juniIsisSysPollESHelloRate,
|
|
juniIsisSysWaitTime,
|
|
juniIsisSysOperState,
|
|
juniIsisSysL1State,
|
|
juniIsisSysCorrLSPs,
|
|
juniIsisSysLSPL1DbaseOloads,
|
|
juniIsisSysManAddrDropFromAreas,
|
|
juniIsisSysAttmptToExMaxSeqNums,
|
|
juniIsisSysSeqNumSkips,
|
|
juniIsisSysOwnLSPPurges,
|
|
juniIsisSysIDFieldLenMismatches,
|
|
juniIsisSysMaxAreaAddrMismatches,
|
|
juniIsisSysOrigL2LSPBuffSize,
|
|
juniIsisSysL2State,
|
|
juniIsisSysLSPL2DbaseOloads,
|
|
juniIsisSysAuthFails,
|
|
juniIsisSysLSPIgnoreErrors,
|
|
juniIsisSysMaxAreaCheck,
|
|
juniIsisSysSetOverloadBit,
|
|
juniIsisSysSetOverloadBitStartupDuration,
|
|
juniIsisSysMaxLspLifetime ,
|
|
juniIsisSysL1SpfInterval,
|
|
juniIsisSysL2SpfInterval,
|
|
juniIsisSysIshHoldTime,
|
|
juniIsisSysIshConfigTimer,
|
|
juniIsisSysDistributeDomainWide,
|
|
juniIsisSysDistance,
|
|
juniIsisSysL1MetricStyle,
|
|
juniIsisSysL2MetricStyle,
|
|
juniIsisSysIsoRouteTag,
|
|
juniIsisSysMplsTeLevel,
|
|
juniIsisSysMplsTeRtrIdIfIndex,
|
|
juniIsisManAreaAddrRowStatus,
|
|
juniIsisSysProtSuppRowStatus,
|
|
juniIsisSummAddrRowStatus,
|
|
juniIsisSummAddrOperState,
|
|
juniIsisSummAddrDefaultMetric,
|
|
juniIsisSummAddrDelayMetric,
|
|
juniIsisSummAddrExpenseMetric,
|
|
juniIsisSummAddrErrorMetric,
|
|
juniIsisSummLevel,
|
|
juniIsisSysHostNameAreaAddr,
|
|
juniIsisSysHostNameName,
|
|
juniIsisSysHostNameType,
|
|
juniIsisSysHostNameRowStatus,
|
|
juniIsisSysAreaAuthenticationPwd,
|
|
juniIsisSysAreaAuthenticationKeyType,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime,
|
|
juniIsisSysAreaAuthenticationRowStatus,
|
|
juniIsisSysDomainAuthenticationPwd,
|
|
juniIsisSysDomainAuthenticationKeyType,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime,
|
|
juniIsisSysDomainAuthenticationRowStatus }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete system level objects for ISIS management functionality. This
|
|
group became obsolete when the MPLS tunnel table was added."
|
|
::= { juniIsisMIBGroups 4 }
|
|
|
|
juniIsisCircBFDGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisCircBfdEnable,
|
|
juniIsisCircBfdMinRxInterval,
|
|
juniIsisCircBfdMinTxInterval,
|
|
juniIsisCircBfdMultiplier
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The circuit level ISIS BFD configuration parameters."
|
|
::= { juniIsisMIBGroups 5 }
|
|
|
|
juniIsisSystemMgmtGroup3 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisSysVersion,
|
|
juniIsisSysType,
|
|
juniIsisSysID,
|
|
juniIsisSysMaxPathSplits,
|
|
juniIsisSysMaxLSPGenInt,
|
|
juniIsisSysOrigLSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses,
|
|
juniIsisSysMinL1LSPGenInt,
|
|
juniIsisSysMinL2LSPGenInt,
|
|
juniIsisSysPollESHelloRate,
|
|
juniIsisSysWaitTime,
|
|
juniIsisSysOperState,
|
|
juniIsisSysL1State,
|
|
juniIsisSysCorrLSPs,
|
|
juniIsisSysLSPL1DbaseOloads,
|
|
juniIsisSysManAddrDropFromAreas,
|
|
juniIsisSysAttmptToExMaxSeqNums,
|
|
juniIsisSysSeqNumSkips,
|
|
juniIsisSysOwnLSPPurges,
|
|
juniIsisSysIDFieldLenMismatches,
|
|
juniIsisSysMaxAreaAddrMismatches,
|
|
juniIsisSysOrigL2LSPBuffSize,
|
|
juniIsisSysL2State,
|
|
juniIsisSysLSPL2DbaseOloads,
|
|
juniIsisSysAuthFails,
|
|
juniIsisSysLSPIgnoreErrors,
|
|
juniIsisSysMaxAreaCheck,
|
|
juniIsisSysSetOverloadBit,
|
|
juniIsisSysSetOverloadBitStartupDuration,
|
|
juniIsisSysMaxLspLifetime ,
|
|
juniIsisSysL1SpfInterval,
|
|
juniIsisSysL2SpfInterval,
|
|
juniIsisSysIshHoldTime,
|
|
juniIsisSysIshConfigTimer,
|
|
juniIsisSysDistributeDomainWide,
|
|
juniIsisSysDistance,
|
|
juniIsisSysL1MetricStyle,
|
|
juniIsisSysL2MetricStyle,
|
|
juniIsisSysIsoRouteTag,
|
|
juniIsisSysMplsTeLevel,
|
|
juniIsisSysMplsTeRtrIdIfIndex,
|
|
juniIsisSysMplsTeSpfUseAnyBestPath,
|
|
juniIsisManAreaAddrRowStatus,
|
|
juniIsisSysProtSuppRowStatus,
|
|
juniIsisSummAddrRowStatus,
|
|
juniIsisSummAddrOperState,
|
|
juniIsisSummAddrDefaultMetric,
|
|
juniIsisSummAddrDelayMetric,
|
|
juniIsisSummAddrExpenseMetric,
|
|
juniIsisSummAddrErrorMetric,
|
|
juniIsisSummLevel,
|
|
juniIsisSysHostNameAreaAddr,
|
|
juniIsisSysHostNameName,
|
|
juniIsisSysHostNameType,
|
|
juniIsisSysHostNameRowStatus,
|
|
juniIsisSysAreaAuthenticationPwd,
|
|
juniIsisSysAreaAuthenticationKeyType,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime,
|
|
juniIsisSysAreaAuthenticationRowStatus,
|
|
juniIsisSysDomainAuthenticationPwd,
|
|
juniIsisSysDomainAuthenticationKeyType,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime,
|
|
juniIsisSysDomainAuthenticationRowStatus,
|
|
juniIsisMplsTeSystemId,
|
|
juniIsisMplsTeRouterId,
|
|
juniIsisMplsTeTunnelMetric,
|
|
juniIsisMplsTeTunnelRelMetric,
|
|
juniIsisMplsTeTunnelName }
|
|
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete system level objects for ISIS management functionality. This
|
|
group became obsolete when the reference bandwidth related variables were added."
|
|
::= { juniIsisMIBGroups 6 }
|
|
|
|
juniIsisSystemMgmtGroup4 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisSysVersion,
|
|
juniIsisSysType,
|
|
juniIsisSysID,
|
|
juniIsisSysMaxPathSplits,
|
|
juniIsisSysMaxLSPGenInt,
|
|
juniIsisSysOrigLSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses,
|
|
juniIsisSysMinL1LSPGenInt,
|
|
juniIsisSysMinL2LSPGenInt,
|
|
juniIsisSysPollESHelloRate,
|
|
juniIsisSysWaitTime,
|
|
juniIsisSysOperState,
|
|
juniIsisSysL1State,
|
|
juniIsisSysCorrLSPs,
|
|
juniIsisSysLSPL1DbaseOloads,
|
|
juniIsisSysManAddrDropFromAreas,
|
|
juniIsisSysAttmptToExMaxSeqNums,
|
|
juniIsisSysSeqNumSkips,
|
|
juniIsisSysOwnLSPPurges,
|
|
juniIsisSysIDFieldLenMismatches,
|
|
juniIsisSysMaxAreaAddrMismatches,
|
|
juniIsisSysOrigL2LSPBuffSize,
|
|
juniIsisSysL2State,
|
|
juniIsisSysLSPL2DbaseOloads,
|
|
juniIsisSysAuthFails,
|
|
juniIsisSysLSPIgnoreErrors,
|
|
juniIsisSysMaxAreaCheck,
|
|
juniIsisSysSetOverloadBit,
|
|
juniIsisSysSetOverloadBitStartupDuration,
|
|
juniIsisSysMaxLspLifetime ,
|
|
juniIsisSysL1SpfInterval,
|
|
juniIsisSysL2SpfInterval,
|
|
juniIsisSysIshHoldTime,
|
|
juniIsisSysIshConfigTimer,
|
|
juniIsisSysDistributeDomainWide,
|
|
juniIsisSysDistance,
|
|
juniIsisSysL1MetricStyle,
|
|
juniIsisSysL2MetricStyle,
|
|
juniIsisSysIsoRouteTag,
|
|
juniIsisSysMplsTeLevel,
|
|
juniIsisSysMplsTeRtrIdIfIndex,
|
|
juniIsisSysMplsTeSpfUseAnyBestPath,
|
|
juniIsisSysReferenceBandwidth,
|
|
juniIsisSysHighReferenceBandwidth,
|
|
juniIsisManAreaAddrRowStatus,
|
|
juniIsisSysProtSuppRowStatus,
|
|
juniIsisSummAddrRowStatus,
|
|
juniIsisSummAddrOperState,
|
|
juniIsisSummAddrDefaultMetric,
|
|
juniIsisSummAddrDelayMetric,
|
|
juniIsisSummAddrExpenseMetric,
|
|
juniIsisSummAddrErrorMetric,
|
|
juniIsisSummLevel,
|
|
juniIsisSysHostNameAreaAddr,
|
|
juniIsisSysHostNameName,
|
|
juniIsisSysHostNameType,
|
|
juniIsisSysHostNameRowStatus,
|
|
juniIsisSysAreaAuthenticationPwd,
|
|
juniIsisSysAreaAuthenticationKeyType,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime,
|
|
juniIsisSysAreaAuthenticationRowStatus,
|
|
juniIsisSysDomainAuthenticationPwd,
|
|
juniIsisSysDomainAuthenticationKeyType,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime,
|
|
juniIsisSysDomainAuthenticationRowStatus,
|
|
juniIsisMplsTeSystemId,
|
|
juniIsisMplsTeRouterId,
|
|
juniIsisMplsTeTunnelMetric,
|
|
juniIsisMplsTeTunnelRelMetric,
|
|
juniIsisMplsTeTunnelName }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system level objects for ISIS management functionality."
|
|
::= { juniIsisMIBGroups 7 }
|
|
END
|
|
|