graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/hp/HP-SN-IP-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

4820 lines
133 KiB
Text
Raw Blame History

HP-SN-IP-MIB DEFINITIONS ::= BEGIN
-- Foundry SnRouter Group MIB Release 1.0.0
-- Revision 0 1/7/97
-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
IpAddress, Counter, TimeTicks
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
InterfaceIndex
FROM IF-MIB
snIp, snRip, snDvmrp, snFsrp, snGblRt, snPim, snLoopbackIf
FROM HP-SN-ROOT-MIB;
-- textual conventions
DisplayString ::= OCTET STRING
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled(0), enabled (1) }
-- Clear Status Values
ClearStatus ::= INTEGER { normal(0), clear(1) }
-- Row Creation/Deletion Values
RowSts ::= INTEGER { other(1),
valid(2),
delete(3),
create(4)
}
-- Port index
PortIndex ::= INTEGER (1..3900)
-- The port index.
-- For FastIron/NetIron products, port index value is from 1 to 42
-- For BigIron products, port index is an encoded number:
-- The bit 0 to bit 7: port number.
-- The bit 8 to bit 11: slot number.
-- For virtual router interface, slot number is 15,
-- port number is the virtual router port from 1 to 60.
-- Therefore, port index value for BigIron is from 257 to 3900.
-- Action
Action ::= INTEGER { deny(0), permit(1) }
PhysAddress ::=
OCTET STRING
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
-- The OSPF Metric is defined as an unsigned value in the range
Metric ::= INTEGER (0..65535)
PortMask ::=
INTEGER
-- This data type is used to model port bitmask. The
-- maximum of ports are 32.
-- SECTION 2: MIB
-- Global Router MIB
-- This section contains global MIB object definitions applicable to the
-- switching router. These objects should be independent to any routing
-- protocol.
snGblRtGeneral OBJECT IDENTIFIER ::= { snGblRt 1 }
snGblRtRouteOnly OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this object is 'enabled', this switching router will only
route packets. If this object is 'disabled', this switching
router will first route packets. If route cannot perform,
it will switch packets."
::= { snGblRtGeneral 1 }
-- Router IP MIB
-- This section contains IP specific router MIB object definitions.
-- IP general group
snRtIpGeneral OBJECT IDENTIFIER ::= { snIp 1 }
snRtClearArpCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear arp cache table."
::= { snRtIpGeneral 1 }
snRtClearIpCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear ip route cache table."
::= { snRtIpGeneral 2 }
snRtClearIpRoute OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear ip route table."
::= { snRtIpGeneral 3 }
snRtBootpServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS deprecated
DESCRIPTION
"IP address of bootp server to
which bootp packet need to be relayed."
::= { snRtIpGeneral 4 }
snRtBootpRelayMax OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of hop the bootp packet
should travel."
::= { snRtIpGeneral 5 }
snRtArpAge OBJECT-TYPE
SYNTAX INTEGER (0..240)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in minutes an ARP entry can
be valid without relearning.
0 - Don't not age."
::= { snRtIpGeneral 6 }
snRtIpIrdpEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform router advertisement on this box."
::= { snRtIpGeneral 7 }
snRtIpLoadShare OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If more than one route available,
use them to share load."
::= { snRtIpGeneral 8 }
snRtIpProxyArp OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable proxy arp function
in the box."
::= { snRtIpGeneral 9 }
snRtIpRarp OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable RARP server."
::= { snRtIpGeneral 10 }
snRtIpTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time to live value to be used
in IP header of IP packet generated
by the box."
::= { snRtIpGeneral 11 }
snRtIpSetAllPortConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is an index number of a
snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex),
which is the selected row to copy all of its read-writable
data (i.e. snRtIpPortMtu and snRtIpPortEncap) to the rest
of the rows in snRtIpPortConfigTable.
Note: prior setting this object, all the intended data of
the given row of the table must be set. Otherwise, the
current data of the row will be used to set the entire ip
interface configuration table. The previous setting will
be overwritten by the new one."
::= { snRtIpGeneral 12 }
snRtIpFwdCacheMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of ip forwarding table entries."
::= { snRtIpGeneral 13 }
snRtIpFwdCacheCurEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of ip forwarding table entries."
::= { snRtIpGeneral 14 }
snRtIpMaxStaticRouteEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of static route entries in the static route table."
::= { snRtIpGeneral 15 }
snRtIpDirBcastFwd OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable directed broadcast forwarding."
DEFVAL { enabled }
::= { snRtIpGeneral 16 }
snRtIpLoadShareNumOfPaths OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of routes are used to share load."
::= { snRtIpGeneral 17 }
snRtIpLoadShareMaxPaths OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of routes can be configured to share load."
::= { snRtIpGeneral 18 }
snRtIpLoadShareMinPaths OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Minimum number of routes can be configured to share load."
::= { snRtIpGeneral 19 }
snRtIpProtocolRouterId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Router Id for all IP Protocols."
::= { snRtIpGeneral 20 }
snRtIpSourceRoute OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable source routing support, ability to drop the
source routing packets."
DEFVAL { enabled }
::= { snRtIpGeneral 21 }
-- IP static route table
snRtIpStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP static/default route table."
::= { snIp 2 }
snRtIpStaticRouteEntry OBJECT-TYPE
SYNTAX SnRtIpStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP static route table."
INDEX { snRtIpStaticRouteIndex }
::= { snRtIpStaticRouteTable 1 }
SnRtIpStaticRouteEntry ::= SEQUENCE {
snRtIpStaticRouteIndex
INTEGER,
snRtIpStaticRouteDest
IpAddress,
snRtIpStaticRouteMask
IpAddress,
snRtIpStaticRouteNextHop
IpAddress,
snRtIpStaticRouteMetric
INTEGER,
snRtIpStaticRouteRowStatus
RowSts,
snRtIpStaticRouteDistance
INTEGER
}
snRtIpStaticRouteIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a static route entry."
::= { snRtIpStaticRouteEntry 1 }
snRtIpStaticRouteDest OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address.
0.0.0.0 for default route."
::= { snRtIpStaticRouteEntry 2 }
snRtIpStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Subnet mask associated with
the destination IP address.
0.0.0.0 for default route mask."
::= { snRtIpStaticRouteEntry 3 }
snRtIpStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of next hop router that
is located on one of the directly
attached IP subnet."
::= { snRtIpStaticRouteEntry 4 }
snRtIpStaticRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metrics to next hop router."
::= { snRtIpStaticRouteEntry 5 }
snRtIpStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a static route
entry."
::= { snRtIpStaticRouteEntry 6 }
snRtIpStaticRouteDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administration distance."
::= { snRtIpStaticRouteEntry 7 }
-- ip filter table
snRtIpFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP filter table."
::= { snIp 3 }
snRtIpFilterEntry OBJECT-TYPE
SYNTAX SnRtIpFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP filter table."
INDEX { snRtIpFilterIndex }
::= { snRtIpFilterTable 1 }
SnRtIpFilterEntry ::= SEQUENCE {
snRtIpFilterIndex
INTEGER,
snRtIpFilterAction
INTEGER,
snRtIpFilterProtocol
INTEGER,
snRtIpFilterSourceIp
IpAddress,
snRtIpFilterSourceMask
IpAddress,
snRtIpFilterDestIp
IpAddress,
snRtIpFilterDestMask
IpAddress,
snRtIpFilterOperator
INTEGER,
snRtIpFilterOperand
INTEGER,
snRtIpFilterRowStatus
RowSts,
snRtIpFilterEstablished
RtrStatus,
snRtIpFilterQosPriority
INTEGER
}
snRtIpFilterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snRtIpFilterEntry 1 }
snRtIpFilterAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1), qosEnabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip packet match
with this filter."
::= { snRtIpFilterEntry 2 }
snRtIpFilterProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transport protocol. 0 means don't care"
::= { snRtIpFilterEntry 3 }
snRtIpFilterSourceIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address."
::= { snRtIpFilterEntry 4 }
snRtIpFilterSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP subnet mask."
::= { snRtIpFilterEntry 5 }
snRtIpFilterDestIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address."
::= { snRtIpFilterEntry 6 }
snRtIpFilterDestMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP subnet mask."
::= { snRtIpFilterEntry 7 }
snRtIpFilterOperator OBJECT-TYPE
SYNTAX INTEGER { greater(1), equal(2), less(3), notEqual(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number"
::= { snRtIpFilterEntry 8 }
snRtIpFilterOperand OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snRtIpFilterEntry 9 }
snRtIpFilterRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a filter
entry."
::= { snRtIpFilterEntry 10 }
snRtIpFilterEstablished OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol."
::= { snRtIpFilterEntry 11 }
snRtIpFilterQosPriority OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The router L4 Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snRtIpFilterEntry 12 }
-- RARP table
snRtIpRarpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRarpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP RARP table."
::= { snIp 4 }
snRtIpRarpEntry OBJECT-TYPE
SYNTAX SnRtIpRarpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Rarp table."
INDEX { snRtIpRarpIndex }
::= { snRtIpRarpTable 1 }
SnRtIpRarpEntry ::= SEQUENCE {
snRtIpRarpIndex
INTEGER,
snRtIpRarpMac
OCTET STRING,
snRtIpRarpIp
IpAddress,
snRtIpRarpRowStatus
RowSts
}
snRtIpRarpIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a Rarp entry."
::= { snRtIpRarpEntry 1 }
snRtIpRarpMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Mac address for a Rarp entry."
::= { snRtIpRarpEntry 2 }
snRtIpRarpIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address for a Rarp entry."
::= { snRtIpRarpEntry 3 }
snRtIpRarpRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Rarp
entry."
::= { snRtIpRarpEntry 4 }
-- Static ARP table
snRtStaticArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtStaticArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP static arp table."
::= { snIp 5 }
snRtStaticArpEntry OBJECT-TYPE
SYNTAX SnRtStaticArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP static arp table."
INDEX { snRtStaticArpIndex }
::= { snRtStaticArpTable 1 }
SnRtStaticArpEntry ::= SEQUENCE {
snRtStaticArpIndex
INTEGER,
snRtStaticArpIp
IpAddress,
snRtStaticArpMac
OCTET STRING,
snRtStaticArpPort
PortIndex,
snRtStaticArpRowStatus
RowSts
}
snRtStaticArpIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a static arp entry."
::= { snRtStaticArpEntry 1 }
snRtStaticArpIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address for a static arp entry."
::= { snRtStaticArpEntry 2 }
snRtStaticArpMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Mac address for a static arp entry."
::= { snRtStaticArpEntry 3 }
snRtStaticArpPort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port index for a static arp entry."
::= { snRtStaticArpEntry 4 }
snRtStaticArpRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Static Arp
entry."
::= { snRtStaticArpEntry 5 }
-- ip interface address table
-- this table was replaced by the snRtIpPortIfAddrTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpPortAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortAddrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP port address table."
::= { snIp 6 }
snRtIpPortAddrEntry OBJECT-TYPE
SYNTAX SnRtIpPortAddrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the IP Port Address table."
INDEX { snRtIpPortAddrPortIndex, snRtIpPortAddress }
::= { snRtIpPortAddrTable 1 }
SnRtIpPortAddrEntry ::= SEQUENCE {
snRtIpPortAddrPortIndex
PortIndex,
snRtIpPortAddress
IpAddress,
snRtIpPortSubnetMask
IpAddress,
snRtIpPortAddrType
INTEGER,
snRtIpPortRowStatus
RowSts
}
snRtIpPortAddrPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port index for port address entry."
::= { snRtIpPortAddrEntry 1 }
snRtIpPortAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port IP address."
::= { snRtIpPortAddrEntry 2 }
snRtIpPortSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The port IP address subnet mask."
::= { snRtIpPortAddrEntry 3 }
snRtIpPortAddrType OBJECT-TYPE
SYNTAX INTEGER { primary(1), secondary(2) }
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The port IP address type."
DEFVAL { primary }
::= { snRtIpPortAddrEntry 4 }
snRtIpPortRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS deprecated
DESCRIPTION
"To create or delete a port address
entry."
::= { snRtIpPortAddrEntry 5 }
-- ip interface access table
-- this table was replaced by the snRtIpPortIfAccessTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpPortAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortAccessEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP port access table."
::= { snIp 7 }
snRtIpPortAccessEntry OBJECT-TYPE
SYNTAX SnRtIpPortAccessEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the IP Port access table."
INDEX { snRtIpPortAccessPortIndex, snRtIpPortAccessDirection }
::= { snRtIpPortAccessTable 1 }
SnRtIpPortAccessEntry ::= SEQUENCE {
snRtIpPortAccessPortIndex
PortIndex,
snRtIpPortAccessDirection
INTEGER,
snRtIpPortAccessFilters
OCTET STRING,
snRtIpPortAccessRowStatus
RowSts
}
snRtIpPortAccessPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port index for port access entry."
::= { snRtIpPortAccessEntry 1 }
snRtIpPortAccessDirection OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The incoming or outgoing check
for port access."
::= { snRtIpPortAccessEntry 2 }
snRtIpPortAccessFilters OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"1st octet correspond to 1st filter
number and so on."
::= { snRtIpPortAccessEntry 3 }
snRtIpPortAccessRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS deprecated
DESCRIPTION
"To create or delete a port access
entry."
::= { snRtIpPortAccessEntry 4 }
-- ip interface configuration table
-- this table was replaced by the snRtIpPortIfConfigTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortConfigEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP port Config table."
::= { snIp 8 }
snRtIpPortConfigEntry OBJECT-TYPE
SYNTAX SnRtIpPortConfigEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the IP Port Config table."
INDEX { snRtIpPortConfigPortIndex }
::= { snRtIpPortConfigTable 1 }
SnRtIpPortConfigEntry ::= SEQUENCE {
snRtIpPortConfigPortIndex
PortIndex,
snRtIpPortMtu
INTEGER,
snRtIpPortEncap
INTEGER,
snRtIpPortMetric
INTEGER,
snRtIpPortDirBcastFwd
RtrStatus
}
snRtIpPortConfigPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port index for port config entry."
::= { snRtIpPortConfigEntry 1 }
snRtIpPortMtu OBJECT-TYPE
SYNTAX INTEGER (576..4470)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The maximun transfer unit."
::= { snRtIpPortConfigEntry 2 }
snRtIpPortEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
snap(2),
hdlc(3),
ppp(4)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Data link encapsulation to be used
on the IP frame transmitted on the
port."
::= { snRtIpPortConfigEntry 3 }
snRtIpPortMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The metric."
DEFVAL { 1 }
::= { snRtIpPortConfigEntry 4 }
snRtIpPortDirBcastFwd OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Enable/Disable directed broadcast forwarding on the port."
DEFVAL { enabled }
::= { snRtIpPortConfigEntry 5 }
-- ip interface address table, PortIndex is changed to ifIndex
snRtIpPortIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortIfAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP port If address table."
::= { snIp 18 }
snRtIpPortIfAddrEntry OBJECT-TYPE
SYNTAX SnRtIpPortIfAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Port Address table."
INDEX { snRtIpPortIfAddrInterfaceIndex, snRtIpPortIfAddress }
::= { snRtIpPortIfAddrTable 1 }
SnRtIpPortIfAddrEntry ::= SEQUENCE {
snRtIpPortIfAddrInterfaceIndex
InterfaceIndex,
snRtIpPortIfAddress
IpAddress,
snRtIpPortIfSubnetMask
IpAddress,
snRtIpPortIfAddrType
INTEGER,
snRtIpPortIfRowStatus
RowSts
}
snRtIpPortIfAddrInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The InterfaceIndex for port address entry."
::= { snRtIpPortIfAddrEntry 1 }
snRtIpPortIfAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port IP address."
::= { snRtIpPortIfAddrEntry 2 }
snRtIpPortIfSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port IP address subnet mask."
::= { snRtIpPortIfAddrEntry 3 }
snRtIpPortIfAddrType OBJECT-TYPE
SYNTAX INTEGER { primary(1), secondary(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port IP address type."
DEFVAL { primary }
::= { snRtIpPortIfAddrEntry 4 }
snRtIpPortIfRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a port address
entry."
::= { snRtIpPortIfAddrEntry 5 }
-- ip interface access table, PortIndex is changed to ifIndex
snRtIpPortIfAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortIfAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP port If access table."
::= { snIp 19 }
snRtIpPortIfAccessEntry OBJECT-TYPE
SYNTAX SnRtIpPortIfAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Port access table."
INDEX { snRtIpPortIfAccessInterfaceIndex, snRtIpPortIfAccessDirection }
::= { snRtIpPortIfAccessTable 1 }
SnRtIpPortIfAccessEntry ::= SEQUENCE {
snRtIpPortIfAccessInterfaceIndex
InterfaceIndex,
snRtIpPortIfAccessDirection
INTEGER,
snRtIpPortIfAccessFilters
OCTET STRING,
snRtIpPortIfAccessRowStatus
RowSts
}
snRtIpPortIfAccessInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The InterfaceIndex for port access entry."
::= { snRtIpPortIfAccessEntry 1 }
snRtIpPortIfAccessDirection OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The incoming or outgoing check
for port access."
::= { snRtIpPortIfAccessEntry 2 }
snRtIpPortIfAccessFilters OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1st octet correspond to 1st filter
number and so on."
::= { snRtIpPortIfAccessEntry 3 }
snRtIpPortIfAccessRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a port access
entry."
::= { snRtIpPortIfAccessEntry 4 }
-- ip interface configuration table, PortIndex is changed to ifIndex
snRtIpPortIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP port If Config table."
::= { snIp 20 }
snRtIpPortIfConfigEntry OBJECT-TYPE
SYNTAX SnRtIpPortIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Port Config table."
INDEX { snRtIpPortIfConfigInterfaceIndex }
::= { snRtIpPortIfConfigTable 1 }
SnRtIpPortIfConfigEntry ::= SEQUENCE {
snRtIpPortIfConfigInterfaceIndex
InterfaceIndex,
snRtIpPortIfMtu
INTEGER,
snRtIpPortIfEncap
INTEGER,
snRtIpPortIfMetric
INTEGER,
snRtIpPortIfDirBcastFwd
RtrStatus
}
snRtIpPortIfConfigInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The If index for port config entry."
::= { snRtIpPortIfConfigEntry 1 }
snRtIpPortIfMtu OBJECT-TYPE
SYNTAX INTEGER (576..4470)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximun transfer unit."
::= { snRtIpPortIfConfigEntry 2 }
snRtIpPortIfEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
snap(2),
hdlc(3),
ppp(4),
other(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Data link encapsulation to be used
on the IP frame transmitted on the
port."
::= { snRtIpPortIfConfigEntry 3 }
snRtIpPortIfMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric."
DEFVAL { 1 }
::= { snRtIpPortIfConfigEntry 4 }
snRtIpPortIfDirBcastFwd OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable directed broadcast forwarding on the port."
DEFVAL { enabled }
::= { snRtIpPortIfConfigEntry 5 }
-- Broadcast forwarding group
snRtBcastFwd OBJECT IDENTIFIER ::= { snIp 9 }
snRtBcastFwdGeneral OBJECT IDENTIFIER ::= { snRtBcastFwd 1 }
snRtUdpBcastFwdPort OBJECT IDENTIFIER ::= { snRtBcastFwd 2 }
snRtUdpHelper OBJECT IDENTIFIER ::= { snRtBcastFwd 3 }
-- General UDP broadcast forwarding group
snRtUdpBcastFwdEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable UDP broadcast forwarding service.
When UDP broadcast forwarding is enabled, default
entries are added to the UDP broadcast forwarding
port table. When it is disabled, UDP broadcast
forwarding port table is flushed to empty."
DEFVAL { enabled }
::= { snRtBcastFwdGeneral 1 }
-- UDP broadcast forwarding port table
snRtUdpBcastFwdPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtUdpBcastFwdPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains a list of UDP port numbers
for which forwarding UDP broadcast is enabled."
::= { snRtUdpBcastFwdPort 1 }
snRtUdpBcastFwdPortEntry OBJECT-TYPE
SYNTAX SnRtUdpBcastFwdPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the UDP broadcast forwarding
port table."
INDEX { snRtUdpBcastFwdPortIndex }
::= { snRtUdpBcastFwdPortTable 1 }
SnRtUdpBcastFwdPortEntry ::= SEQUENCE {
snRtUdpBcastFwdPortIndex
INTEGER,
snRtUdpBcastFwdPortNumber
INTEGER,
snRtUdpBcastFwdPortRowStatus
RowSts
}
snRtUdpBcastFwdPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..20)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a UDP broadcast forwarding
port entry."
::= { snRtUdpBcastFwdPortEntry 1 }
snRtUdpBcastFwdPortNumber OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"UDP port number for which UDP broadcast forwarding
is enabled."
::= { snRtUdpBcastFwdPortEntry 2 }
snRtUdpBcastFwdPortRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a UDP broadcast forwarding
port entry."
::= { snRtUdpBcastFwdPortEntry 3 }
-- UDP helper table
snRtUdpHelperTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtUdpHelperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"UDP helper table."
::= { snRtUdpHelper 1 }
snRtUdpHelperEntry OBJECT-TYPE
SYNTAX SnRtUdpHelperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the UDP helper table."
INDEX { snRtUdpHelperPortIndex, snRtUdpHelperIndex }
::= { snRtUdpHelperTable 1 }
SnRtUdpHelperEntry ::= SEQUENCE {
snRtUdpHelperPortIndex
PortIndex,
snRtUdpHelperIndex
INTEGER,
snRtUdpHelperAddr
IpAddress,
snRtUdpHelperRowStatus
RowSts
}
snRtUdpHelperPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for a UDP helper entry."
::= { snRtUdpHelperEntry 1 }
snRtUdpHelperIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a UDP helper entry."
::= { snRtUdpHelperEntry 2 }
snRtUdpHelperAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The UDP helper address. This is the address that
UDP packets will be forwarded. It can be a helper
address or a subnet broadcast address. But it
cannot be 255.255.255.255 or 0.0.0.0."
::= { snRtUdpHelperEntry 3 }
snRtUdpHelperRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a UDP helper entry."
::= { snRtUdpHelperEntry 4 }
-- Trace route group
-- This group uses the following method to detect routes used to reach
-- a destination address. The originating router sends a probe packet
-- (a UDP packet) to the destination address with TTL of 1. The first
-- router that receives this packet decrements the TTL, then drops the
-- packet and returns a ICMP packet to the originator. The originating
-- router records the route in snRtIpTraceRouteResultTable. The ori-
-- ginating router sends a probe packet (a UDP packet) to the des-
-- tination address with TTL of 2. The second router that receives
-- this packet decrements the TTL, then drops the packet and returns
-- a ICMP packet to the originator. The originating router records the
-- route in snRtIpTraceRouteResultTable. This procedure is repeated
-- until the destination is reached, or the maximum TTL is reached.
snRtIpTraceRoute OBJECT IDENTIFIER ::= { snIp 10 }
snRtIpTraceRouteGeneral OBJECT IDENTIFIER ::= { snRtIpTraceRoute 1 }
snRtIpTraceRouteResult OBJECT IDENTIFIER ::= { snRtIpTraceRoute 2 }
-- General trace route group
snRtIpTraceRouteTargetAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Target IP address of which trace route is performed."
::= { snRtIpTraceRouteGeneral 1 }
snRtIpTraceRouteMinTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum TTL value carried in the first probe packet."
DEFVAL { 1 }
::= { snRtIpTraceRouteGeneral 2 }
snRtIpTraceRouteMaxTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum TTL value carried in the last probe packet."
DEFVAL { 30 }
::= { snRtIpTraceRouteGeneral 3 }
snRtIpTraceRouteTimeOut OBJECT-TYPE
SYNTAX INTEGER (1..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time out period (in seconds) to wait for the response
from the probe packet (i,e, the ICMP packet)."
DEFVAL { 2 }
::= { snRtIpTraceRouteGeneral 4 }
snRtIpTraceRouteControl OBJECT-TYPE
SYNTAX INTEGER {
start(1),
abort(2),
success(3),
failure(4),
inProgress(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Only 'start' and 'abort' are writable values; 'success',
'failure' and 'inProgress' are readeable (or returned)
values.
Writing 'start' to this object to initiate the trace route
operation. snRtIpTraceRouteDestAddr must have been init-
ialized before 'start' is writen.
This object will return 'inProgress' after trace route
operation has started. During the 'inProgress' state,
writing 'abort' to this object will stop the current
trace route operation.
If the destination address is reached, this object
returned 'success'. snRtIpTraceRouteResultTable
contains the routes (and the target address) to
reach the destination address. If the destination
address does not reach, timeout, or ending TTL
reached, 'failure' is returned."
::= { snRtIpTraceRouteGeneral 5 }
-- Trace route result table
snRtIpTraceRouteResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpTraceRouteResultEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Trace route result table."
::= { snRtIpTraceRouteResult 1 }
snRtIpTraceRouteResultEntry OBJECT-TYPE
SYNTAX SnRtIpTraceRouteResultEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the trace route result table."
INDEX { snRtIpTraceRouteResultIndex }
::= { snRtIpTraceRouteResultTable 1 }
SnRtIpTraceRouteResultEntry ::= SEQUENCE {
snRtIpTraceRouteResultIndex
INTEGER,
snRtIpTraceRouteResultAddr
IpAddress,
snRtIpTraceRouteResultRoundTripTime1
TimeTicks,
snRtIpTraceRouteResultRoundTripTime2
TimeTicks
}
snRtIpTraceRouteResultIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a trace route result entry."
::= { snRtIpTraceRouteResultEntry 1 }
snRtIpTraceRouteResultAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The router or the target address of which forms
part of the route to reach the destination address."
::= { snRtIpTraceRouteResultEntry 2 }
snRtIpTraceRouteResultRoundTripTime1 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The round trip time between the first probe packet
transmitted and the reponse ICMP packet received."
::= { snRtIpTraceRouteResultEntry 3 }
snRtIpTraceRouteResultRoundTripTime2 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The round trip time between the second probe packet
transmitted and the reponse ICMP packet received."
::= { snRtIpTraceRouteResultEntry 4 }
-- IP forwarding cache table
snRtIpFwdCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpFwdCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP forwarding cache table."
::= { snIp 11 }
snRtIpFwdCacheEntry OBJECT-TYPE
SYNTAX SnRtIpFwdCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP forwarding cache table."
INDEX { snRtIpFwdCacheIndex }
::= { snRtIpFwdCacheTable 1 }
SnRtIpFwdCacheEntry ::= SEQUENCE {
snRtIpFwdCacheIndex
INTEGER,
snRtIpFwdCacheIp
IpAddress,
snRtIpFwdCacheMac
OCTET STRING,
snRtIpFwdCacheNextHopIp
IpAddress,
snRtIpFwdCacheOutgoingPort
INTEGER,
snRtIpFwdCacheType
INTEGER,
snRtIpFwdCacheAction
INTEGER,
snRtIpFwdCacheFragCheck
INTEGER,
snRtIpFwdCacheSnapHdr
INTEGER,
snRtIpFwdCacheVLanId
INTEGER
}
snRtIpFwdCacheIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a ip forwarding cache table entry."
::= { snRtIpFwdCacheEntry 1 }
snRtIpFwdCacheIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of a station."
::= { snRtIpFwdCacheEntry 2 }
snRtIpFwdCacheMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Mac address of an IP station."
::= { snRtIpFwdCacheEntry 3 }
snRtIpFwdCacheNextHopIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The next hop router IP address."
::= { snRtIpFwdCacheEntry 4 }
snRtIpFwdCacheOutgoingPort OBJECT-TYPE
SYNTAX INTEGER (0..3900)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The outgoing port of which packets will forward to.
Return port value of zero to indicate no outgoing port
associated to this entry. Non-zero value has the
following meanings:
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number.
For virtual router interface, slot number is 15,
port number is the virtual router port from 1 to 60."
::= { snRtIpFwdCacheEntry 5 }
snRtIpFwdCacheType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), permanent(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 'dynamic' or 'permanent' type for a ip forwarding
cache table entry."
::= { snRtIpFwdCacheEntry 6 }
snRtIpFwdCacheAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
forward(2),
forUs(3),
waitForArp(4),
complexFilter(5),
icmpDeny(6),
dropPacket(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The action to take."
::= { snRtIpFwdCacheEntry 7 }
snRtIpFwdCacheFragCheck OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Check for fragmentation."
::= { snRtIpFwdCacheEntry 8 }
snRtIpFwdCacheSnapHdr OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Apply SNAP encapsulation."
::= { snRtIpFwdCacheEntry 9 }
snRtIpFwdCacheVLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID for a ip forwarding cache table entry.
Return VLAN ID value of zero to indicate no VLAN
associated to this entry."
::= { snRtIpFwdCacheEntry 10 }
-- Ip AS-Path Access List table
snIpAsPathAccessListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpAsPathAccessListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip As-Path Access List table."
::= { snIp 12 }
snIpAsPathAccessListEntry OBJECT-TYPE
SYNTAX SnIpAsPathAccessListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip As-Path Access List table."
INDEX { snIpAsPathAccessListIndex, snIpAsPathAccessListSequence}
::= { snIpAsPathAccessListTable 1 }
SnIpAsPathAccessListEntry ::= SEQUENCE {
snIpAsPathAccessListIndex
INTEGER,
snIpAsPathAccessListSequence
INTEGER,
snIpAsPathAccessListAction
INTEGER,
snIpAsPathAccessListRegExpression
OCTET STRING,
snIpAsPathAccessListRowStatus
INTEGER
}
snIpAsPathAccessListIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snIpAsPathAccessListEntry 1 }
snIpAsPathAccessListSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpAsPathAccessListEntry 2 }
snIpAsPathAccessListAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snIpAsPathAccessListEntry 3 }
snIpAsPathAccessListRegExpression OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Autonomous system in the filter using a regular expression.
Each character of the regular expression string is represented
by one octet."
::= { snIpAsPathAccessListEntry 4 }
snIpAsPathAccessListRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpAsPathAccessListEntry 5 }
-- Ip Community List table
snIpCommunityListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpCommunityListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip Community List table."
::= { snIp 13 }
snIpCommunityListEntry OBJECT-TYPE
SYNTAX SnIpCommunityListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip Community List table."
INDEX { snIpCommunityListIndex, snIpCommunityListSequence}
::= { snIpCommunityListTable 1 }
SnIpCommunityListEntry ::= SEQUENCE {
snIpCommunityListIndex
INTEGER,
snIpCommunityListSequence
INTEGER,
snIpCommunityListAction
INTEGER,
snIpCommunityListCommNum
OCTET STRING,
snIpCommunityListInternet
INTEGER,
snIpCommunityListNoAdvertise
INTEGER,
snIpCommunityListNoExport
INTEGER,
snIpCommunityListRowStatus
INTEGER,
snIpCommunityListLocalAs
INTEGER
}
snIpCommunityListIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snIpCommunityListEntry 1 }
snIpCommunityListSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpCommunityListEntry 2 }
snIpCommunityListAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snIpCommunityListEntry 3 }
snIpCommunityListCommNum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFFFFFF. There are 20 of them.
This integer number is represented by 4 OCTETs."
::= { snIpCommunityListEntry 4 }
snIpCommunityListInternet OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disabled/Enabled the Internet Community."
::= { snIpCommunityListEntry 5 }
snIpCommunityListNoAdvertise OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to any peer (internal or external)."
::= { snIpCommunityListEntry 6 }
snIpCommunityListNoExport OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to an EBGP peer."
::= { snIpCommunityListEntry 7 }
snIpCommunityListRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpCommunityListEntry 8 }
snIpCommunityListLocalAs OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Send this route to peers in other sub-autonomous systems within
the local confederation. Do not advertise this route to an
external system."
::= { snIpCommunityListEntry 9 }
-- Ip Prefix List table
snIpPrefixListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpPrefixListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip Prefix List table."
::= { snIp 14 }
snIpPrefixListEntry OBJECT-TYPE
SYNTAX SnIpPrefixListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip As-Path Access List table."
INDEX { snIpPrefixListName, snIpPrefixListSequence}
::= { snIpPrefixListTable 1 }
SnIpPrefixListEntry ::= SEQUENCE {
snIpPrefixListName
OCTET STRING,
snIpPrefixListSequence
INTEGER,
snIpPrefixListDesc
OCTET STRING,
snIpPrefixListAction
INTEGER,
snIpPrefixListAddr
IpAddress,
snIpPrefixListMask
IpAddress,
snIpPrefixListGeValue
INTEGER,
snIpPrefixListLeValue
INTEGER,
snIpPrefixListRowStatus
INTEGER
}
snIpPrefixListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An octet string of the ip prefix list name, each character of the name
is represented by one octet."
::= { snIpPrefixListEntry 1 }
snIpPrefixListSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpPrefixListEntry 2 }
snIpPrefixListDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the ip prefix list description, each character of the name
is represented by one octet."
::= { snIpPrefixListEntry 3 }
snIpPrefixListAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip prefix match
with this filter."
::= { snIpPrefixListEntry 4 }
snIpPrefixListAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Prefix IP address."
::= { snIpPrefixListEntry 5 }
snIpPrefixListMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Prefix IP mask."
::= { snIpPrefixListEntry 6 }
snIpPrefixListGeValue OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Greater than value."
::= { snIpPrefixListEntry 7 }
snIpPrefixListLeValue OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Less than value."
::= { snIpPrefixListEntry 8 }
snIpPrefixListRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpPrefixListEntry 9 }
-- ################################ new 2 tables ###################################
-- Ip AS-Path Access List table
snIpAsPathAccessListStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpAsPathAccessListStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip As-Path Access List table, string version."
::= { snIp 16 }
snIpAsPathAccessListStringEntry OBJECT-TYPE
SYNTAX SnIpAsPathAccessListStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip As-Path Access List table."
INDEX { snIpAsPathAccessListStringName, snIpAsPathAccessListStringSequence}
::= { snIpAsPathAccessListStringTable 1 }
SnIpAsPathAccessListStringEntry ::= SEQUENCE {
snIpAsPathAccessListStringName
DisplayString,
snIpAsPathAccessListStringSequence
INTEGER,
snIpAsPathAccessListStringAction
INTEGER,
snIpAsPathAccessListStringRegExpression
DisplayString,
snIpAsPathAccessListStringRowStatus
INTEGER
}
snIpAsPathAccessListStringName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry, string version."
::= { snIpAsPathAccessListStringEntry 1 }
snIpAsPathAccessListStringSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpAsPathAccessListStringEntry 2 }
snIpAsPathAccessListStringAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snIpAsPathAccessListStringEntry 3 }
snIpAsPathAccessListStringRegExpression OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Autonomous system in the filter using a regular expression.
Each character of the regular expression string is represented
by one octet."
::= { snIpAsPathAccessListStringEntry 4 }
snIpAsPathAccessListStringRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpAsPathAccessListStringEntry 5 }
-- Ip Community ListString table
snIpCommunityListStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpCommunityListStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip Community ListString table, string version."
::= { snIp 17 }
snIpCommunityListStringEntry OBJECT-TYPE
SYNTAX SnIpCommunityListStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip Community ListString table."
INDEX { snIpCommunityListStringName, snIpCommunityListStringSequence}
::= { snIpCommunityListStringTable 1 }
SnIpCommunityListStringEntry ::= SEQUENCE {
snIpCommunityListStringName
DisplayString,
snIpCommunityListStringSequence
INTEGER,
snIpCommunityListStringAction
INTEGER,
snIpCommunityListStringCommNum
OCTET STRING,
snIpCommunityListStringInternet
INTEGER,
snIpCommunityListStringNoAdvertise
INTEGER,
snIpCommunityListStringNoExport
INTEGER,
snIpCommunityListStringRowStatus
INTEGER,
snIpCommunityListStringLocalAs
INTEGER
}
snIpCommunityListStringName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snIpCommunityListStringEntry 1 }
snIpCommunityListStringSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpCommunityListStringEntry 2 }
snIpCommunityListStringAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snIpCommunityListStringEntry 3 }
snIpCommunityListStringCommNum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFFFFFF. There are 20 of them.
This integer number is represented by 4 OCTETs."
::= { snIpCommunityListStringEntry 4 }
snIpCommunityListStringInternet OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disabled/Enabled the Internet Community."
::= { snIpCommunityListStringEntry 5 }
snIpCommunityListStringNoAdvertise OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to any peer (internal or external)."
::= { snIpCommunityListStringEntry 6 }
snIpCommunityListStringNoExport OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to an EBGP peer."
::= { snIpCommunityListStringEntry 7 }
snIpCommunityListStringRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpCommunityListStringEntry 8 }
snIpCommunityListStringLocalAs OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Send this route to peers in other sub-autonomous systems within
the local confederation. Do not advertise this route to an
external system."
::= { snIpCommunityListStringEntry 9 }
-- SECTION 2: MIB
-- Router IP RIP MIB
snRtIpRipGeneral OBJECT IDENTIFIER ::= { snRip 1 }
-- IP RIP general group
snRtIpRipEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable ip rip routing."
::= { snRtIpRipGeneral 1 }
snRtIpRipUpdateTime OBJECT-TYPE
SYNTAX INTEGER (1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ip rip update interval in seconds."
::= { snRtIpRipGeneral 2 }
snRtIpRipRedisEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable redistribution to rip."
::= { snRtIpRipGeneral 3 }
snRtIpRipRedisDefMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Default metric to be used when redistribute route to rip."
::= { snRtIpRipGeneral 4 }
snRtIpRipSetAllPortConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is an index number of a
snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex),
which is the selected row to copy all of its read-writable data
(i.e. snRtIpRipPortVersion and snRtIpRipPortPoisonReverse) to the
rest of the rows in snRtIpRipPortConfigTable.
Note: prior setting this object, all the intended data of the
given row of the table must be set. Otherwise, the current data
of the row will be used to set the entire ip rip port configuration
table. The previous setting will be overwritten by the new one."
::= { snRtIpRipGeneral 5 }
snRtIpRipGblFiltList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An ip rip global filter list, of which each octet contains a
filter ID number that forms a group of filters. A valid entry
in the snRtIpRipRouteFilterTable with the corresponding filter
ID number (i.e. snRtIpRipRouteFilterId) must have been created
before a filter list is initialized."
::= { snRtIpRipGeneral 6 }
snRtIpRipFiltOnAllPort OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
deleteAllInBound(2),
deleteAllOutBound(3),
addAllInBound(4),
addAllOutBound(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply the ip rip global filter list snRtIpRipGblFiltList to
all interfaces. This object is used to add all rip filter
lists and delete all rip filter lists to/from all interfaces.
Prior to sending this command, snRtIpRipGblFiltList must have
been set to a proper filter list.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation failed, then a SET with value of (2) or (3)
returns error code 'GenError'. If succeed, entries in the
filter list are deleted immediately.
The following values can be returned on reads:
valid(1)....set operation is done and is valid."
::= { snRtIpRipGeneral 7 }
snRtIpRipDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administration distance."
::= { snRtIpRipGeneral 8 }
-- IP RIP port configuration table
-- this table was replaced by the snRtIpRipPortIfConfigTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpRipPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipPortConfigEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP Rip port Config table."
::= { snRip 2 }
snRtIpRipPortConfigEntry OBJECT-TYPE
SYNTAX SnRtIpRipPortConfigEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the IP Rip Port Config table."
INDEX { snRtIpRipPortConfigPortIndex }
::= { snRtIpRipPortConfigTable 1 }
SnRtIpRipPortConfigEntry ::= SEQUENCE {
snRtIpRipPortConfigPortIndex
PortIndex,
snRtIpRipPortVersion
INTEGER,
snRtIpRipPortPoisonReverse
RtrStatus,
snRtIpRipPortLearnDefault
INTEGER
}
snRtIpRipPortConfigPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port index for ip rip port config entry."
::= { snRtIpRipPortConfigEntry 1 }
snRtIpRipPortVersion OBJECT-TYPE
SYNTAX INTEGER { disabled(0), v1Only(1), v2Only(2), v1CompatibleV2(3) }
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The ip rip version on this port."
::= { snRtIpRipPortConfigEntry 2 }
snRtIpRipPortPoisonReverse OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Enable/disable poison reverse."
::= { snRtIpRipPortConfigEntry 3 }
snRtIpRipPortLearnDefault OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Apply the RIP router protocol learn-default option to the
interface. The values that can be written are:
disabled(0)...deleted the learn default option.
enabled(1)....enabled the learn default option."
::= { snRtIpRipPortConfigEntry 4 }
-- redistribution table
snRtIpRipRedisTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipRedisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP Rip Redistribution table."
::= { snRip 3 }
snRtIpRipRedisEntry OBJECT-TYPE
SYNTAX SnRtIpRipRedisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Rip Redistribution table."
INDEX { snRtIpRipRedisIndex }
::= { snRtIpRipRedisTable 1 }
SnRtIpRipRedisEntry ::= SEQUENCE {
snRtIpRipRedisIndex
INTEGER,
snRtIpRipRedisAction
Action,
snRtIpRipRedisProtocol
INTEGER,
snRtIpRipRedisIp
IpAddress,
snRtIpRipRedisMask
IpAddress,
snRtIpRipRedisMatchMetric
Metric,
snRtIpRipRedisSetMetric
INTEGER,
snRtIpRipRedisRowStatus
RowSts
}
snRtIpRipRedisIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a IP Rip Redistribution entry."
::= { snRtIpRipRedisEntry 1 }
snRtIpRipRedisAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The action to take when match this
IP Rip Redistribution entry."
::= { snRtIpRipRedisEntry 2 }
snRtIpRipRedisProtocol OBJECT-TYPE
SYNTAX INTEGER { other(1), all(2), static(3), ospf(4), bgp(5), isis(6) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The protocol to be distributed. other(1) cannot be
used for SNMP-SET."
::= { snRtIpRipRedisEntry 3 }
snRtIpRipRedisIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ip address of the ip route to be distributed.
0.0.0.0 - all routes"
::= { snRtIpRipRedisEntry 4 }
snRtIpRipRedisMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ip subnet mask of the ip route to be distributed."
::= { snRtIpRipRedisEntry 5 }
snRtIpRipRedisMatchMetric OBJECT-TYPE
SYNTAX Metric
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric of the route to be matched
to determine the redistribution.
0 - any metric value"
::= { snRtIpRipRedisEntry 6 }
snRtIpRipRedisSetMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new metric of the route to be advertised.
0 - use the default metric."
::= { snRtIpRipRedisEntry 7 }
snRtIpRipRedisRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Redistribution entry."
::= { snRtIpRipRedisEntry 8 }
-- IP RIP route filter table
snRtIpRipRouteFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ip rip route filter table."
::= { snRip 4 }
snRtIpRipRouteFilterEntry OBJECT-TYPE
SYNTAX SnRtIpRipRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the ip rip route filter table."
INDEX { snRtIpRipRouteFilterId }
::= { snRtIpRipRouteFilterTable 1 }
SnRtIpRipRouteFilterEntry ::= SEQUENCE {
snRtIpRipRouteFilterId
INTEGER,
snRtIpRipRouteFilterAction
Action,
snRtIpRipRouteFilterIpAddr
IpAddress,
snRtIpRipRouteFilterSubnetMask
IpAddress,
snRtIpRipRouteFilterRowStatus
INTEGER
}
snRtIpRipRouteFilterId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID to identify a filter entry."
::= { snRtIpRipRouteFilterEntry 1 }
snRtIpRipRouteFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip rip packet matched
with this filter."
::= { snRtIpRipRouteFilterEntry 2 }
snRtIpRipRouteFilterIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Route IP address to compare with any route IP addresses
in a ip rip packet. IP address 0.0.0.0 always compare
equals to any route IP addresses in any ip rip packets."
::= { snRtIpRipRouteFilterEntry 3 }
snRtIpRipRouteFilterSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Subnet mask to apply to the route IP address in a ip rip
packet, the result is compared to snRtIpRipRouteFilterIpAddr.
If snRtIpRipRouteFilterIpAddr is 0.0.0.0, this subnet mask
value is ignored."
::= { snRtIpRipRouteFilterEntry 4 }
snRtIpRipRouteFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snRtIpRipRouteFilterEntry 5 }
-- IP RIP neighbor filter table
snRtIpRipNbrFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipNbrFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ip rip neighbor filter table."
::= { snRip 5 }
snRtIpRipNbrFilterEntry OBJECT-TYPE
SYNTAX SnRtIpRipNbrFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the ip rip neighbor filter table."
INDEX { snRtIpRipNbrFilterId }
::= { snRtIpRipNbrFilterTable 1 }
SnRtIpRipNbrFilterEntry ::= SEQUENCE {
snRtIpRipNbrFilterId
INTEGER,
snRtIpRipNbrFilterAction
Action,
snRtIpRipNbrFilterSourceIp
IpAddress,
snRtIpRipNbrFilterRowStatus
INTEGER
}
snRtIpRipNbrFilterId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID to identify a filter entry."
::= { snRtIpRipNbrFilterEntry 1 }
snRtIpRipNbrFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip rip packet source IP
address compares equal to the source IP address
in this filter."
::= { snRtIpRipNbrFilterEntry 2 }
snRtIpRipNbrFilterSourceIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address to compare with the source IP
address in a ip rip packet. IP address 0.0.0.0
always compares equal to any source IP addresses
in any ip rip packets."
::= { snRtIpRipNbrFilterEntry 3 }
snRtIpRipNbrFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snRtIpRipNbrFilterEntry 4 }
-- IP RIP port access table
-- this table was replaced by the snRtIpRipPortIfAccessTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpRipPortAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipPortAccessEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"ip interface rip access table."
::= { snRip 6 }
snRtIpRipPortAccessEntry OBJECT-TYPE
SYNTAX SnRtIpRipPortAccessEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry of the ip interface rip access table."
INDEX { snRtIpRipPortAccessPort, snRtIpRipPortAccessDir }
::= { snRtIpRipPortAccessTable 1 }
SnRtIpRipPortAccessEntry ::= SEQUENCE {
snRtIpRipPortAccessPort
PortIndex,
snRtIpRipPortAccessDir
INTEGER,
snRtIpRipPortAccessFilterList
OCTET STRING,
snRtIpRipPortAccessRowStatus
INTEGER
}
snRtIpRipPortAccessPort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The ip interface to which the rip filter applies."
::= { snRtIpRipPortAccessEntry 1 }
snRtIpRipPortAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snRtIpRipPortAccessEntry 2 }
snRtIpRipPortAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"An ip rip filter list, of which each octet contains
a filter ID number that forms a group of filters. A
valid entry in the snRtIpRipRouteFilterTable with the
corresponding filter ID number (i.e. snRtIpRipRouteFilterId)
must have been created before a filter list is initialized."
::= { snRtIpRipPortAccessEntry 3 }
snRtIpRipPortAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snRtIpRipPortAccessEntry 4 }
-- IP RIP port configuration table, PortIndex is changed to ifIndex
snRtIpRipPortIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipPortIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP Rip port If Config table."
::= { snRip 7 }
snRtIpRipPortIfConfigEntry OBJECT-TYPE
SYNTAX SnRtIpRipPortIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Rip Port If Config table."
INDEX { snRtIpRipPortIfConfigInterfaceIndex }
::= { snRtIpRipPortIfConfigTable 1 }
SnRtIpRipPortIfConfigEntry ::= SEQUENCE {
snRtIpRipPortIfConfigInterfaceIndex
InterfaceIndex,
snRtIpRipPortIfVersion
INTEGER,
snRtIpRipPortIfPoisonReverse
RtrStatus,
snRtIpRipPortIfLearnDefault
INTEGER
}
snRtIpRipPortIfConfigInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The If index for ip rip port config entry."
::= { snRtIpRipPortIfConfigEntry 1 }
snRtIpRipPortIfVersion OBJECT-TYPE
SYNTAX INTEGER { disabled(0), v1Only(1), v2Only(2), v1CompatibleV2(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ip rip version on this port."
::= { snRtIpRipPortIfConfigEntry 2 }
snRtIpRipPortIfPoisonReverse OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable poison reverse."
::= { snRtIpRipPortIfConfigEntry 3 }
snRtIpRipPortIfLearnDefault OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply the RIP router protocol learn-default option to the
interface. The values that can be written are:
disabled(0)...deleted the learn default option.
enabled(1)....enabled the learn default option."
::= { snRtIpRipPortIfConfigEntry 4 }
-- IP RIP port access table, PortIndex is changed to ifIndex
snRtIpRipPortIfAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipPortIfAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ip interface rip access table."
::= { snRip 8 }
snRtIpRipPortIfAccessEntry OBJECT-TYPE
SYNTAX SnRtIpRipPortIfAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the ip interface rip access table."
INDEX { snRtIpRipPortIfAccessPort, snRtIpRipPortIfAccessDir }
::= { snRtIpRipPortIfAccessTable 1 }
SnRtIpRipPortIfAccessEntry ::= SEQUENCE {
snRtIpRipPortIfAccessPort
InterfaceIndex,
snRtIpRipPortIfAccessDir
INTEGER,
snRtIpRipPortIfAccessFilterList
OCTET STRING,
snRtIpRipPortIfAccessRowStatus
INTEGER
}
snRtIpRipPortIfAccessPort OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ip interface to which the rip filter applies."
::= { snRtIpRipPortIfAccessEntry 1 }
snRtIpRipPortIfAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snRtIpRipPortIfAccessEntry 2 }
snRtIpRipPortIfAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An ip rip filter list, of which each octet contains
a filter ID number that forms a group of filters. A
valid entry in the snRtIpRipRouteFilterTable with the
corresponding filter ID number (i.e. snRtIpRipRouteFilterId)
must have been created before a filter list is initialized."
::= { snRtIpRipPortIfAccessEntry 3 }
snRtIpRipPortIfAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snRtIpRipPortIfAccessEntry 4 }
-- DVMRP MIB
snDvmrpMIBObjects OBJECT IDENTIFIER ::= { snDvmrp 1 }
snDvmrpVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The router's DVMRP version information."
::= { snDvmrpMIBObjects 1 }
snDvmrpEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable DVMRP on this router."
DEFVAL { disabled }
::= { snDvmrpMIBObjects 2 }
snDvmrpGenerationId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The generation identifier for the routing process. This is
used by neighboring routers to detect whether pruning
information should be resent."
::= { snDvmrpMIBObjects 3 }
snDvmrpProbeInterval OBJECT-TYPE
SYNTAX INTEGER (5..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval at which the router sends out
probe messages to discover neighbour routers. Value is
in number of seconds. snDvmrpEnable must be 'enabled'
before this object is writen."
DEFVAL { 10 }
::= { snDvmrpMIBObjects 4 }
snDvmrpReportInterval OBJECT-TYPE
SYNTAX INTEGER (10..2000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval at which the router sends out
full report messages. Value is in number of seconds.
snDvmrpEnable must be 'enabled' before this object is
writen."
DEFVAL { 60 }
::= { snDvmrpMIBObjects 5 }
snDvmrpTriggerInterval OBJECT-TYPE
SYNTAX INTEGER (5..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval at which triggered updates are
sent out. Value is in number of seconds. snDvmrpEnable must
be 'enabled' before this object is writen."
DEFVAL { 5 }
::= { snDvmrpMIBObjects 6 }
snDvmrpNeighborRouterTimeout OBJECT-TYPE
SYNTAX INTEGER (60..8000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which the neighbour router
is considered down. Value is in number of seconds. snDvmrpEnable
must be 'enabled' before this object is writen."
DEFVAL { 180 }
::= { snDvmrpMIBObjects 7 }
snDvmrpRouteExpireTime OBJECT-TYPE
SYNTAX INTEGER (20..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which the route expires
and becomes unreachable. Value is in number of seconds.
snDvmrpEnable must be 'enabled' before this object is writen."
DEFVAL { 200 }
::= { snDvmrpMIBObjects 8 }
snDvmrpRouteDiscardTime OBJECT-TYPE
SYNTAX INTEGER (40..8000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which a route is discarded
from the route table. Value is in number of seconds.
snDvmrpEnable must be 'enabled' before this object is writen."
DEFVAL { 340 }
::= { snDvmrpMIBObjects 9 }
snDvmrpPruneAge OBJECT-TYPE
SYNTAX INTEGER (20..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the duration of time for which the prune state
is stored. Value is in number of seconds. snDvmrpEnable
must be 'enabled' before this object is writen."
DEFVAL { 180 }
::= { snDvmrpMIBObjects 10 }
snDvmrpGraftRetransmitTime OBJECT-TYPE
SYNTAX INTEGER (5..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which a graft message will
be retransmitted if graft acknowledge message has not been
received. Value is in number of seconds. snDvmrpEnable must
be 'enabled' before this object is writen."
DEFVAL { 10 }
::= { snDvmrpMIBObjects 11 }
snDvmrpDefaultRoute OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the IP address of a router that is connected to one
of the directly attached subnet. If a multicast route is not
present on the local router, this default route will be used
for multicast forwarding. snDvmrpEnable must be 'enabled'
before this object is writen."
::= { snDvmrpMIBObjects 12 }
-- The DVMRP Virtual Interface Table
snDvmrpVInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpVInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's DVMRP virtual
interfaces. snDvmrpEnable must be 'enabled' before this
table is read or writen."
::= { snDvmrpMIBObjects 13 }
snDvmrpVInterfaceEntry OBJECT-TYPE
SYNTAX SnDvmrpVInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snDvmrpVInterfaceTable.
This row augments ipMRouteInterfaceEntry in the IP
Multicast MIB, where the threshold object resides."
INDEX { snDvmrpVInterfaceVifIndex }
::= { snDvmrpVInterfaceTable 1 }
SnDvmrpVInterfaceEntry ::= SEQUENCE {
snDvmrpVInterfaceVifIndex INTEGER,
snDvmrpVInterfaceType INTEGER,
snDvmrpVInterfaceOperState INTEGER,
snDvmrpVInterfaceLocalAddress IpAddress,
snDvmrpVInterfaceRemoteAddress IpAddress,
snDvmrpVInterfaceRemoteSubnetMask IpAddress,
snDvmrpVInterfaceMetric INTEGER,
snDvmrpVInterfaceTtlThreshold INTEGER,
snDvmrpVInterfaceAdvertiseLocal RtrStatus,
snDvmrpVInterfaceEncapsulation RtrStatus,
snDvmrpVInterfaceStatus INTEGER }
snDvmrpVInterfaceVifIndex OBJECT-TYPE
SYNTAX INTEGER (1..48)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of this DVMRP virtual interface."
::= { snDvmrpVInterfaceEntry 1 }
snDvmrpVInterfaceType OBJECT-TYPE
SYNTAX INTEGER { tunnel(1), querier(2), subnet(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of this DVMRP virtual interface, whether it uses
a tunnel, a physical interface for which we are a querier,
or a physical interface for which we are not a querier.
For write operation, this object can only accept tunnel(1)
to configure a tunnel interface or subnet(3) to configure
a physical interface."
::= { snDvmrpVInterfaceEntry 2 }
snDvmrpVInterfaceOperState OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operational state of this DVMRP virtual
interface."
::= { snDvmrpVInterfaceEntry 3 }
snDvmrpVInterfaceLocalAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the local end of this DVMRP virtual
interface."
::= { snDvmrpVInterfaceEntry 4 }
snDvmrpVInterfaceRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the remote end of this DVMRP virtual
interface. For a tunnel, this is the IP address of the
neighboring router. For a subnet, this is the subnet
address."
::= { snDvmrpVInterfaceEntry 5 }
snDvmrpVInterfaceRemoteSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subnet mask for a directly connected subnet. For
a tunnel, this should be 0.0.0.0."
::= { snDvmrpVInterfaceEntry 6 }
snDvmrpVInterfaceMetric OBJECT-TYPE
SYNTAX INTEGER (1..31)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The distance metric for this DVMRP virtual interface which
is used to calculate distance vectors."
DEFVAL { 1 }
::= { snDvmrpVInterfaceEntry 7 }
snDvmrpVInterfaceTtlThreshold OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the minimum time-to-live value to forward the packets
out of this virtual interface."
DEFVAL { 1 }
::= { snDvmrpVInterfaceEntry 8 }
snDvmrpVInterfaceAdvertiseLocal OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable the advertising of this local route."
DEFVAL { enabled }
::= { snDvmrpVInterfaceEntry 9 }
snDvmrpVInterfaceEncapsulation OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable the encapsulation of the DVMRP control
packets when using IPINIP encapsulation."
DEFVAL { disabled }
::= { snDvmrpVInterfaceEntry 10 }
snDvmrpVInterfaceStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2)....Setting it to 'valid' has the effect of
changing the row to operative."
::= { snDvmrpVInterfaceEntry 11 }
-- The DVMRP Neighbor Table
snDvmrpNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpNeighborEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's DVMRP
neighbors, as discovered by receiving Neighbor Probe
messages. snDvmrpEnable must be 'enabled' before this
table is read."
::= { snDvmrpMIBObjects 14 }
snDvmrpNeighborEntry OBJECT-TYPE
SYNTAX SnDvmrpNeighborEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snDvmrpNeighborTable."
INDEX { snDvmrpNeighborEntryIndex }
::= { snDvmrpNeighborTable 1 }
SnDvmrpNeighborEntry ::= SEQUENCE {
snDvmrpNeighborEntryIndex INTEGER,
snDvmrpNeighborVifIndex INTEGER,
snDvmrpNeighborAddress IpAddress,
snDvmrpNeighborUpTime TimeTicks,
snDvmrpNeighborExpiryTime TimeTicks,
snDvmrpNeighborGenerationId INTEGER,
snDvmrpNeighborMajorVersion INTEGER,
snDvmrpNeighborMinorVersion INTEGER,
snDvmrpNeighborCapabilities INTEGER }
snDvmrpNeighborEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index."
::= { snDvmrpNeighborEntry 1 }
snDvmrpNeighborVifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of VifIndex for the virtual interface used to
reach this DVMRP neighbor."
::= { snDvmrpNeighborEntry 2 }
snDvmrpNeighborAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the DVMRP neighbor for which this entry
contains information."
::= { snDvmrpNeighborEntry 3 }
snDvmrpNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time since this DVMRP neighbor (last) became a neighbor
of the local router."
::= { snDvmrpNeighborEntry 4 }
snDvmrpNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum time remaining before this DVMRP neighbor will
be aged out."
::= { snDvmrpNeighborEntry 5 }
snDvmrpNeighborGenerationId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The neighboring router's generation identifier."
::= { snDvmrpNeighborEntry 6 }
snDvmrpNeighborMajorVersion OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The neighboring router's major DVMRP version number."
::= { snDvmrpNeighborEntry 7 }
snDvmrpNeighborMinorVersion OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The neighboring router's minor DVMRP version number."
::= { snDvmrpNeighborEntry 8 }
snDvmrpNeighborCapabilities OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object describes the neighboring router's
capabilities. The following shows the position
of each bit:
bit position meaning
----------- ------
3 mtrace bit
2 generationID bit
1 prune bit
0 leaf bit
The leaf bit indicates that the neighbor has only
one interface with neighbors. The prune bit indicates
that the neighbor supports pruning. The generationID bit
indicates that the neighbor sends its generationID in Probe
messages. The mtrace bit indicates that the neighbor can
handle mtrace requests."
::= { snDvmrpNeighborEntry 9 }
-- The DVMRP Route Table
snDvmrpRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The routing table used by DVMRP in place of the unicast
routing table. snDvmrpEnable must be 'enabled' before this
table is read."
::= { snDvmrpMIBObjects 15 }
snDvmrpRouteEntry OBJECT-TYPE
SYNTAX SnDvmrpRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information used by DVMRP in place of the unicast routing
information."
INDEX { snDvmrpRouteEntryIndex }
::= { snDvmrpRouteTable 1 }
SnDvmrpRouteEntry ::= SEQUENCE {
snDvmrpRouteEntryIndex INTEGER,
snDvmrpRouteSource IpAddress,
snDvmrpRouteSourceMask IpAddress,
snDvmrpRouteUpstreamNeighbor IpAddress,
snDvmrpRouteVifIndex INTEGER,
snDvmrpRouteMetric INTEGER,
snDvmrpRouteExpiryTime TimeTicks }
snDvmrpRouteEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index."
::= { snDvmrpRouteEntry 1 }
snDvmrpRouteSource OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network address which when combined with the
corresponding value of snDvmrpRouteSourceMask identifies the
sources for which this entry contains multicast routing
information."
::= { snDvmrpRouteEntry 2 }
snDvmrpRouteSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network mask which when combined with the corresponding
value of snDvmrpRouteSource identifies the sources for which
this entry contains multicast routing information."
::= { snDvmrpRouteEntry 3 }
snDvmrpRouteUpstreamNeighbor OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources are received."
::= { snDvmrpRouteEntry 4 }
snDvmrpRouteVifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of snDvmrpVInterfaceVifIndex for the virtual
interface on which IP datagrams sent by these sources are
received."
::= { snDvmrpRouteEntry 5 }
snDvmrpRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The distance in hops to the source subnet."
::= { snDvmrpRouteEntry 6 }
snDvmrpRouteExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out."
::= { snDvmrpRouteEntry 7 }
-- The DVMRP Routing Next Hop Table
snDvmrpRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpRouteNextHopEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams. snDvmrpEnable must be 'enabled' before this
table is read."
::= { snDvmrpMIBObjects 16 }
snDvmrpRouteNextHopEntry OBJECT-TYPE
SYNTAX SnDvmrpRouteNextHopEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources are routed."
INDEX { snDvmrpRouteNextHopSource, snDvmrpRouteNextHopSourceMask,
snDvmrpRouteNextHopVifIndex }
::= { snDvmrpRouteNextHopTable 1 }
SnDvmrpRouteNextHopEntry ::= SEQUENCE {
snDvmrpRouteNextHopSource IpAddress,
snDvmrpRouteNextHopSourceMask IpAddress,
snDvmrpRouteNextHopVifIndex INTEGER,
snDvmrpRouteNextHopType INTEGER }
snDvmrpRouteNextHopSource OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network address which when combined with the
corresponding value of snDvmrpRouteNextHopSourceMask
identifies the sources for which this entry specifies
a next hop on an outgoing interface."
::= { snDvmrpRouteNextHopEntry 1 }
snDvmrpRouteNextHopSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network mask which when combined with the corresponding
value of snDvmrpRouteNextHopSource identifies the sources for
which this entry specifies a next hop on an outgoing
interface."
::= { snDvmrpRouteNextHopEntry 2 }
snDvmrpRouteNextHopVifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The snDvmrpVInterfaceVifIndex value of the virtual interface
for the outgoing interface for this next hop."
::= { snDvmrpRouteNextHopEntry 3 }
snDvmrpRouteNextHopType OBJECT-TYPE
SYNTAX INTEGER { leaf(1), branch(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type is leaf if no neighbors exist on the outgoing virtual
interface. Otherwise, type is branch."
::= { snDvmrpRouteNextHopEntry 4 }
-- The DVMRP Virtual Interface Statistics Table
snDvmrpVIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpVIfStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's DVMRP virtual interface
statistical counters. snDvmrpEnable must be 'enabled' before this
table is read."
::= { snDvmrpMIBObjects 17 }
snDvmrpVIfStatEntry OBJECT-TYPE
SYNTAX SnDvmrpVIfStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snDvmrpVIfStatTable."
INDEX { snDvmrpVIfStatVifIndex }
::= { snDvmrpVIfStatTable 1 }
SnDvmrpVIfStatEntry ::= SEQUENCE {
snDvmrpVIfStatVifIndex INTEGER,
snDvmrpVIfStatInPkts Counter,
snDvmrpVIfStatOutPkts Counter,
snDvmrpVIfStatInOctets Counter,
snDvmrpVIfStatOutOctets Counter,
snDvmrpVIfStatInProbePkts Counter,
snDvmrpVIfStatOutProbePkts Counter,
snDvmrpVIfStatDiscardProbePkts Counter,
snDvmrpVIfStatInRtUpdatePkts Counter,
snDvmrpVIfStatOutRtUpdatePkts Counter,
snDvmrpVIfStatDiscardRtUpdatePkts Counter,
snDvmrpVIfStatInGraftPkts Counter,
snDvmrpVIfStatOutGraftPkts Counter,
snDvmrpVIfStatDiscardGraftPkts Counter,
snDvmrpVIfStatInGraftAckPkts Counter,
snDvmrpVIfStatOutGraftAckPkts Counter,
snDvmrpVIfStatDiscardGraftAckPkts Counter,
snDvmrpVIfStatInPrunePkts Counter,
snDvmrpVIfStatOutPrunePkts Counter,
snDvmrpVIfStatDiscardPrunePkts Counter }
snDvmrpVIfStatVifIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of this DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 1 }
snDvmrpVIfStatInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have arrived on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 2 }
snDvmrpVIfStatOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have been sent on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 3 }
snDvmrpVIfStatInOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets that have arrived on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 4 }
snDvmrpVIfStatOutOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets that have been sent on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 5 }
snDvmrpVIfStatInProbePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of probe packets that have arrived
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 6 }
snDvmrpVIfStatOutProbePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of probe packets that have been sent
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 7 }
snDvmrpVIfStatDiscardProbePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of probe packets that have been discarded
by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 8 }
snDvmrpVIfStatInRtUpdatePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of route update packets that have arrived
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 9 }
snDvmrpVIfStatOutRtUpdatePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of route update packets that have been sent
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 10 }
snDvmrpVIfStatDiscardRtUpdatePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of route update packets that have been
discarded by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 11 }
snDvmrpVIfStatInGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have arrived
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 12 }
snDvmrpVIfStatOutGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have been sent
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 13 }
snDvmrpVIfStatDiscardGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have been discarded
by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 14 }
snDvmrpVIfStatInGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have arrived
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 15 }
snDvmrpVIfStatOutGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have been
sent on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 16 }
snDvmrpVIfStatDiscardGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have been
discarded by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 17 }
snDvmrpVIfStatInPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have arrived on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 18 }
snDvmrpVIfStatOutPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have been sent on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 19 }
snDvmrpVIfStatDiscardPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have been discarded
by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 20 }
-- FSRP MIB
snFsrpGlobal OBJECT IDENTIFIER ::= { snFsrp 1 }
snFsrpIntf OBJECT IDENTIFIER ::= { snFsrp 2 }
-- Section 1: FSRP Global Variables
snFsrpGroupOperMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The FSRP is configured on this system
either enabled or disabled and the
default is disabled mode.
disabled(0)..........disable FSRP
enabled(1)...........activate FSRP"
::= { snFsrpGlobal 1 }
snFsrpIfStateChangeTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate FSRP interface state change
traps."
DEFVAL { enabled }
::= { snFsrpGlobal 2 }
-- Section 2: FSRP Interface Configuration Table
-- The FSRP (Foundry Standby Routing Protocol) Interface Table augments
-- the ifTable with FSRP specific information.
snFsrpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnFsrpIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The FSRP Interface Table describes the interfaces from
the viewpoint of FSRP."
::= { snFsrpIntf 1 }
snFsrpIfEntry OBJECT-TYPE
SYNTAX SnFsrpIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The FSRP Interface Entry describes one interface from
the viewpoint of FSRP."
INDEX { snFsrpIfPort, snFsrpIfIpAddress }
::= { snFsrpIfTable 1 }
SnFsrpIfEntry ::=
SEQUENCE {
snFsrpIfPort
INTEGER,
snFsrpIfIpAddress
IpAddress,
snFsrpIfVirRtrIpAddr
IpAddress,
snFsrpIfOtherRtrIpAddr
IpAddress,
snFsrpIfPreferLevel
INTEGER,
snFsrpIfTrackPortMask
PortMask,
snFsrpIfRowStatus
INTEGER,
snFsrpIfState
INTEGER,
snFsrpIfKeepAliveTime
INTEGER,
snFsrpIfRouterDeadTime
INTEGER,
snFsrpIfChassisTrackPortMask
OCTET STRING,
snFsrpIfTrackPortList
OCTET STRING
}
snFsrpIfPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical router port of this FSRP interface."
::= { snFsrpIfEntry 1 }
snFsrpIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address of the physical router port of this
interface."
::= { snFsrpIfEntry 2 }
snFsrpIfVirRtrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Address of the Virtual Router for the interface.
The Virtual Router IP address need to be configured on
the interface before Redundant Router Function can operate
on the interface. This address has to be same on all the
routers that going to participate in the Redundant Router
Function on a given subnet."
::= { snFsrpIfEntry 3 }
snFsrpIfOtherRtrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Address of the Other Router on this ip subnet
that operates FSRP and to whom the Keep Alive message
need to be sent by this router. This object must be
configured for FSRP to work correctly"
::= { snFsrpIfEntry 4 }
snFsrpIfPreferLevel OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The higher the number the higher the priority is.
This parameter decides which router should becomes
the Active Router for the interface. A Router with
higher priority selected to becomes the Active Router."
DEFVAL { 100 }
::= { snFsrpIfEntry 5 }
snFsrpIfTrackPortMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Standalone router FSRP Track port membership (Not used for Chassis Product)"
DEFVAL { 0 }
::= { snFsrpIfEntry 6 }
snFsrpIfRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snFsrpIfEntry 7 }
snFsrpIfState OBJECT-TYPE
SYNTAX INTEGER {
init(0),
negotiating(1),
standby(2),
active(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object specifies the FSRP Router's interface state as:
init(0)...initialization state.
negotiating(1)...negotiating state.
standby(2)...standby state.
active(3)...active state."
::= { snFsrpIfEntry 8 }
snFsrpIfKeepAliveTime OBJECT-TYPE
SYNTAX INTEGER (1..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The heart-beat is from 1 to 120 seconds."
DEFVAL { 3 }
::= { snFsrpIfEntry 9 }
snFsrpIfRouterDeadTime OBJECT-TYPE
SYNTAX INTEGER (3..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The hold time of the Fsrp router is from 3 to 255 seconds."
DEFVAL { 9 }
::= { snFsrpIfEntry 10 }
snFsrpIfChassisTrackPortMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Chassis router FSRP Track port membership.
(It was obsoleted after release 07100, replaced by snFsrpIfTrackPortList)"
::= { snFsrpIfEntry 11 }
snFsrpIfTrackPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the other 8-bit is the port number. Default value
is 0 length octet string. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router FSRP physical track port membership."
::= { snFsrpIfEntry 12 }
-- PIM MIB
snPimMIBObjects OBJECT IDENTIFIER ::= { snPim 1 }
snPimSMMIBObjects OBJECT IDENTIFIER ::= { snPim 2 }
snPimEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable PIM on this router."
DEFVAL { disabled }
::= { snPimMIBObjects 1 }
snPimNeighborRouterTimeout OBJECT-TYPE
SYNTAX INTEGER (60..8000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which the neighbour router
is considered down. Value is in number of seconds. snPimEnable
must be 'enabled' before this object is writen."
DEFVAL { 180 }
::= { snPimMIBObjects 2 }
snPimHelloTime OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the interval at which hello message is sent out
an interface to the neighbouring router. This is used to
detect the presence or abscense of a neighbouring router.
Value is in number of seconds. snPimEnable must be 'enabled'
before this object is writen."
DEFVAL { 60 }
::= { snPimMIBObjects 3 }
snPimPruneTime OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the duration of time for which the prune state
is stored. Value is in number of seconds. snPimEnable
must be 'enabled' before this object is writen."
DEFVAL { 60 }
::= { snPimMIBObjects 4 }
snPimGraftRetransmitTime OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which a graft message will
be retransmitted if graft acknowledge message has not been
received. Value is in number of seconds. snPimEnable must
be 'enabled' before this object is writen."
DEFVAL { 180 }
::= { snPimMIBObjects 5 }
snPimInactivityTime OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the interval after which the forwarding entry is
deleted. When a packet is received for a group entry, this
time is reset. This is used to only keep the forwarding
entries for the active sessions. Value is in number of
seconds. snPimEnable must be 'enabled' before this object
is writen."
DEFVAL { 180 }
::= { snPimMIBObjects 6 }
-- The PIM Virtual Interface Table
snPimVInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimVInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's PIM virtual
interfaces. snPimEnable must be 'enabled' before this
table is read or writen."
::= { snPimMIBObjects 7 }
snPimVInterfaceEntry OBJECT-TYPE
SYNTAX SnPimVInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimVInterfaceTable."
INDEX { snPimVInterfaceVifIndex }
::= { snPimVInterfaceTable 1 }
SnPimVInterfaceEntry ::= SEQUENCE {
snPimVInterfaceVifIndex INTEGER,
snPimVInterfaceType INTEGER,
snPimVInterfaceLocalAddress IpAddress,
snPimVInterfaceLocalSubnetMask IpAddress,
snPimVInterfaceRemoteAddress IpAddress,
snPimVInterfaceDR IpAddress,
snPimVInterfaceTtlThreshold INTEGER,
snPimVInterfaceStatus INTEGER,
snPimVInterfaceMode INTEGER }
snPimVInterfaceVifIndex OBJECT-TYPE
SYNTAX INTEGER (1..48)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of this PIM virtual interface."
::= { snPimVInterfaceEntry 1 }
snPimVInterfaceType OBJECT-TYPE
SYNTAX INTEGER { tunnel(1), subnet(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of PIM virtual interface, whether it uses
a tunnel or a physical interface."
::= { snPimVInterfaceEntry 2 }
snPimVInterfaceLocalAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the local end of this PIM virtual
interface."
::= { snPimVInterfaceEntry 3 }
snPimVInterfaceLocalSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network mask for the IP address of the PIM
virtual interface. For a tunnel, this should be
0.0.0.0."
::= { snPimVInterfaceEntry 4 }
snPimVInterfaceRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the remote end of this PIM virtual
interface."
::= { snPimVInterfaceEntry 5 }
snPimVInterfaceDR OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Designated Router on this PIM virtual interface.
For point-to-point interfaces, this object has the
value 0.0.0.0."
::= { snPimVInterfaceEntry 6 }
snPimVInterfaceTtlThreshold OBJECT-TYPE
SYNTAX INTEGER (1..31)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the minimum time-to-live value to forward the packets
out of this interface."
DEFVAL { 1 }
::= { snPimVInterfaceEntry 7 }
snPimVInterfaceStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2)....Setting it to 'valid' has the effect of
changing the row to operative."
::= { snPimVInterfaceEntry 8 }
snPimVInterfaceMode OBJECT-TYPE
SYNTAX INTEGER { dense(1), sparse(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configured mode of this PIM interface."
DEFVAL { dense }
::= { snPimVInterfaceEntry 9 }
-- The PIM Neighbor Table
snPimNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimNeighborEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's PIM
neighbors. snPimEnable must be 'enabled' before this
table is read."
::= { snPimMIBObjects 8 }
snPimNeighborEntry OBJECT-TYPE
SYNTAX SnPimNeighborEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimNeighborTable."
INDEX { snPimNeighborEntryIndex }
::= { snPimNeighborTable 1 }
SnPimNeighborEntry ::= SEQUENCE {
snPimNeighborEntryIndex INTEGER,
snPimNeighborVifIndex INTEGER,
snPimNeighborAddress IpAddress,
snPimNeighborUpTime TimeTicks,
snPimNeighborExpiryTime TimeTicks }
snPimNeighborEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index."
::= { snPimNeighborEntry 1 }
snPimNeighborVifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of VifIndex for the virtual interface used to
reach this PIM neighbor."
::= { snPimNeighborEntry 2 }
snPimNeighborAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the PIM neighbor for which this entry
contains information."
::= { snPimNeighborEntry 3 }
snPimNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time since this PIM neighbor (last) became a neighbor
of the local router."
::= { snPimNeighborEntry 4 }
snPimNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum time remaining before this PIM neighbor will
be aged out."
::= { snPimNeighborEntry 5 }
-- The PIM Virtual Interface Statistics Table
snPimVIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimVIfStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's PIM virtual
interface statistical counters. snPimEnable must be
'enabled' before this table is read."
::= { snPimMIBObjects 9 }
snPimVIfStatEntry OBJECT-TYPE
SYNTAX SnPimVIfStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimVIfStatTable."
INDEX { snPimVIfStatVifIndex }
::= { snPimVIfStatTable 1 }
SnPimVIfStatEntry ::= SEQUENCE {
snPimVIfStatVifIndex INTEGER,
snPimVIfStatInJoinPkts Counter,
snPimVIfStatOutJoinPkts Counter,
snPimVIfStatDiscardJoinPkts Counter,
snPimVIfStatInPrunePkts Counter,
snPimVIfStatOutPrunePkts Counter,
snPimVIfStatDiscardPrunePkts Counter,
snPimVIfStatInAssertPkts Counter,
snPimVIfStatOutAssertPkts Counter,
snPimVIfStatDiscardAssertPkts Counter,
snPimVIfStatInHelloPkts Counter,
snPimVIfStatOutHelloPkts Counter,
snPimVIfStatDiscardHelloPkts Counter,
snPimVIfStatInGraftPkts Counter,
snPimVIfStatOutGraftPkts Counter,
snPimVIfStatDiscardGraftPkts Counter,
snPimVIfStatInGraftAckPkts Counter,
snPimVIfStatOutGraftAckPkts Counter,
snPimVIfStatDiscardGraftAckPkts Counter }
snPimVIfStatVifIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of this PIM virtual interface."
::= { snPimVIfStatEntry 1 }
snPimVIfStatInJoinPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of join packets that have arrived
on the PIM virtual interface."
::= { snPimVIfStatEntry 2 }
snPimVIfStatOutJoinPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of join packets that have been sent
on the PIM virtual interface."
::= { snPimVIfStatEntry 3 }
snPimVIfStatDiscardJoinPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of join packets that have been discarded
by the PIM virtual interface."
::= { snPimVIfStatEntry 4 }
snPimVIfStatInPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have arrived on the PIM
virtual interface."
::= { snPimVIfStatEntry 5 }
snPimVIfStatOutPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have been sent on the PIM
virtual interface."
::= { snPimVIfStatEntry 6 }
snPimVIfStatDiscardPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have been discarded
by the PIM virtual interface."
::= { snPimVIfStatEntry 7 }
snPimVIfStatInAssertPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of assert packets that have arrived
on the PIM virtual interface."
::= { snPimVIfStatEntry 8 }
snPimVIfStatOutAssertPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of assert packets that have been sent
on the PIM virtual interface."
::= { snPimVIfStatEntry 9 }
snPimVIfStatDiscardAssertPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of assert packets that have been
discarded by the PIM virtual interface."
::= { snPimVIfStatEntry 10 }
snPimVIfStatInHelloPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hello packets that have arrived on the PIM
virtual interface."
::= { snPimVIfStatEntry 11 }
snPimVIfStatOutHelloPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hello packets that have been sent on the PIM
virtual interface."
::= { snPimVIfStatEntry 12 }
snPimVIfStatDiscardHelloPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hello packets that have been discarded
by the PIM virtual interface."
::= { snPimVIfStatEntry 13 }
snPimVIfStatInGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have arrived
on the PIM virtual interface."
::= { snPimVIfStatEntry 14 }
snPimVIfStatOutGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have been sent
on the PIM virtual interface."
::= { snPimVIfStatEntry 15 }
snPimVIfStatDiscardGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have been discarded
by the PIM virtual interface."
::= { snPimVIfStatEntry 16 }
snPimVIfStatInGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have arrived
on the PIM virtual interface."
::= { snPimVIfStatEntry 17 }
snPimVIfStatOutGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have been
sent on the PIM virtual interface."
::= { snPimVIfStatEntry 18 }
snPimVIfStatDiscardGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have been
discarded by the PIM virtual interface."
::= { snPimVIfStatEntry 19 }
-- PIM-SM MIB
snPimJoinPruneInterval OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default interval in seconds at which periodic
PIM-SM Join/Prune messages are to be sent. snPimEnable must
be 'enabled' before this table is read or writen."
::= { snPimSMMIBObjects 1 }
-- PIM Candidate-BSR Table
snPimCandidateBSRTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimCandidateBSR
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Candidate Bootstrap Router information."
::= { snPimSMMIBObjects 2 }
snPimCandidateBSREntry OBJECT-TYPE
SYNTAX SnPimCandidateBSR
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimCandidateBSRTable."
INDEX { snPimCandidateBSRPortID }
::= { snPimCandidateBSRTable 1 }
SnPimCandidateBSR ::= SEQUENCE {
snPimCandidateBSRPortID INTEGER,
snPimCandidateBSRIPAddress IpAddress,
snPimCandidateBSRHashMaskLen INTEGER,
snPimCandidateBSRPreference INTEGER
}
snPimCandidateBSRPortID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the PIM interface.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number."
::= { snPimCandidateBSREntry 1 }
snPimCandidateBSRIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The (unicast) address of the Candidate BSR."
::= { snPimCandidateBSREntry 2 }
snPimCandidateBSRHashMaskLen OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The hash mask value for this router as a candidate
bootstrap router."
::= { snPimCandidateBSREntry 3 }
snPimCandidateBSRPreference OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preference value for this router as a candidate
bootstrap router."
DEFVAL { 100 }
::= { snPimCandidateBSREntry 4 }
-- The PIM RP-Set Table
snPimRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimRPSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements. When
the local router is not the BSR, this information is
obtained from received RP-Set messages.
snPimEnable must be 'enabled' before this
table is read or writen."
::= { snPimSMMIBObjects 3 }
snPimRPSetEntry OBJECT-TYPE
SYNTAX SnPimRPSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimRPSetTable."
INDEX { snPimRPSetGroupAddress, snPimRPSetMask, snPimRPSetIPAddress }
::= { snPimRPSetTable 1 }
SnPimRPSetEntry ::= SEQUENCE {
snPimRPSetGroupAddress IpAddress,
snPimRPSetMask IpAddress,
snPimRPSetIPAddress IpAddress,
snPimRPSetHoldTime INTEGER
}
snPimRPSetGroupAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP multicast group address which, when combined with
snPimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP."
::= { snPimRPSetEntry 1 }
snPimRPSetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The multicast group address mask which, when combined with
snPimRPSetGroupAddress, gives the group prefix for which this
entry contains information about the Candidate-RP."
::= { snPimRPSetEntry 2 }
snPimRPSetIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the Candidate-RP."
::= { snPimRPSetEntry 3 }
snPimRPSetHoldTime OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The holdtime, in seconds, of a Candidate-RP. If the
local router is not the BSR, this value is 0."
::= { snPimRPSetEntry 4 }
-- The PIM Candidate-RP Table
snPimCandidateRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimCandidateRPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP. If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
snPimEnable must be 'enabled' before this
table is read or writen."
::= { snPimSMMIBObjects 4 }
snPimCandidateRPEntry OBJECT-TYPE
SYNTAX SnPimCandidateRPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimCandidateRPTable."
INDEX { snPimCandidateRPGroupAddress,
snPimCandidateRPMask }
::= { snPimCandidateRPTable 1 }
SnPimCandidateRPEntry ::= SEQUENCE {
snPimCandidateRPGroupAddress IpAddress,
snPimCandidateRPMask IpAddress,
snPimCandidateRPIPAddress IpAddress,
snPimCandidateRPRowStatus INTEGER
}
snPimCandidateRPGroupAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP multicast group address which, when combined with
snPimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { snPimCandidateRPEntry 1 }
snPimCandidateRPMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The multicast group address mask which, when combined with
snPimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { snPimCandidateRPEntry 2 }
snPimCandidateRPIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The (unicast) address of the interface which will be
advertised as a Candidate-RP."
::= { snPimCandidateRPEntry 3 }
snPimCandidateRPRowStatus OBJECT-TYPE
SYNTAX INTEGER {
noSuch(0),
other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table.
This object is used to create and delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with value of create(4)
returns error 'badValue'. Deleted rows go away
immediately. The following values can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snPimCandidateRPEntry 4 }
-- Loopback Interface configuration table
snLoopbackIntfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnLoopbackIntfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Loopback Interface Config table."
::= { snLoopbackIf 1 }
snLoopbackIntfConfigEntry OBJECT-TYPE
SYNTAX SnLoopbackIntfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Loopback Interface Config table."
INDEX { snLoopbackIntfConfigPortIndex }
::= { snLoopbackIntfConfigTable 1 }
SnLoopbackIntfConfigEntry ::= SEQUENCE {
snLoopbackIntfConfigPortIndex
INTEGER,
snLoopbackIntfMode
INTEGER,
snLoopbackIntfRowStatus
INTEGER
}
snLoopbackIntfConfigPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for Loopback Interface config entry."
::= { snLoopbackIntfConfigEntry 1 }
snLoopbackIntfMode OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Loopback Interface mode."
::= { snLoopbackIntfConfigEntry 2 }
snLoopbackIntfRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snLoopbackIntfConfigEntry 3 }
END
Reference in a new issue View git blame Copy permalink