Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
280 lines
10 KiB
Text
280 lines
10 KiB
Text
HP-ICF-RIP DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, MODULE-IDENTITY, IpAddress
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TruthValue, RowStatus
|
|
FROM SNMPv2-TC
|
|
rip2IfConfEntry
|
|
FROM RIPv2-MIB
|
|
IANAipRouteProtocol
|
|
FROM IANA-RTPROTO-MIB
|
|
hpSwitch
|
|
FROM HP-ICF-OID;
|
|
|
|
hpicfRip MODULE-IDENTITY
|
|
LAST-UPDATED "200305130217Z" -- May 13, 2003
|
|
ORGANIZATION "Hewlett-Packard Company
|
|
Workgroup Networks Division"
|
|
CONTACT-INFO "Hewlett-Packard Company
|
|
8000 Foothills Blvd.
|
|
Roseville, CA 95747"
|
|
DESCRIPTION "This MIB module contains HP proprietary
|
|
extensions to the standard RIP MIB."
|
|
|
|
REVISION "200305130217Z" -- May 13, 2003
|
|
DESCRIPTION "Added an object for configuring a default
|
|
administrative distance for RIP routes."
|
|
|
|
REVISION "200111130339Z" -- November 13, 2001
|
|
DESCRIPTION "Initial revision."
|
|
::= { hpSwitch 13 }
|
|
|
|
hpicfRipObjects OBJECT IDENTIFIER ::= { hpicfRip 1 }
|
|
|
|
hpicfRipGeneral OBJECT IDENTIFIER ::= { hpicfRipObjects 1 }
|
|
|
|
hpicfRipAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The operational status of the RIP routing protocol."
|
|
::= { hpicfRipGeneral 1 }
|
|
|
|
hpicfRipDefaultMetric OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..15 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Default metric value for routes redistributed to
|
|
RIP."
|
|
::= { hpicfRipGeneral 2 }
|
|
|
|
hpicfRipAutoSummary OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A flag indicating whether RIP should perform
|
|
border filtering on subnet routes when crossing
|
|
a network boundary. Interfaces that are configured
|
|
for RIPv1 or RIPv1-compatible mode must always
|
|
filter subnets at network boundaries. Interfaces
|
|
configured for RIPv2 mode will only filter subnets
|
|
if this flag is set to 'true'. Setting this to
|
|
'true' will result in all subnets within a
|
|
class-based network to be summarized using a single
|
|
route for the subnet number, which can decrease the
|
|
size of the routing tables. However, if any networks
|
|
are discontiguous, this flag should be set to 'false'
|
|
for proper routing."
|
|
::= { hpicfRipGeneral 3 }
|
|
|
|
hpicfRipDistance OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administrative distance to associate with
|
|
routes learned by RIP. Routes with lower distances
|
|
are preferred. By default, RIP routes have
|
|
an administrative distance of 120."
|
|
::= { hpicfRipGeneral 4 }
|
|
|
|
|
|
hpicfRipIfConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfIfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "HP extensions to the rip2IfConfTable."
|
|
::= { hpicfRipObjects 2 }
|
|
|
|
hpicfRipIfConfEntry OBJECT-TYPE
|
|
SYNTAX HpicfIfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "HP extensions for a single RIP interface."
|
|
AUGMENTS { rip2IfConfEntry }
|
|
::= { hpicfRipIfConfTable 1 }
|
|
|
|
HpicfIfConfEntry ::=
|
|
SEQUENCE {
|
|
hpicfRipIfConfDoPoison TruthValue,
|
|
hpicfRipIfConfCost Integer32
|
|
}
|
|
|
|
hpicfRipIfConfDoPoison OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Flag indicating if router should perform poison
|
|
reverse on this interface."
|
|
DEFVAL { true }
|
|
::= { hpicfRipIfConfEntry 1 }
|
|
|
|
hpicfRipIfConfCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "RIP metric for this interface."
|
|
DEFVAL { 1 }
|
|
::= { hpicfRipIfConfEntry 2 }
|
|
|
|
|
|
hpicfRipRedistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfRipRedistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for configuring route redistribution
|
|
into RIP."
|
|
::= { hpicfRipObjects 3 }
|
|
|
|
hpicfRipRedistEntry OBJECT-TYPE
|
|
SYNTAX HpicfRipRedistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table for configuring route
|
|
redistribution into RIP from a single source
|
|
protocol. Entries in this table are not
|
|
created dynamically. There will be a single
|
|
entry for each supported source protocol."
|
|
INDEX { hpicfRipRedistSrcProto }
|
|
::= { hpicfRipRedistTable 1 }
|
|
|
|
HpicfRipRedistEntry ::=
|
|
SEQUENCE {
|
|
hpicfRipRedistSrcProto IANAipRouteProtocol,
|
|
hpicfRipRedistEnabled TruthValue
|
|
}
|
|
|
|
hpicfRipRedistSrcProto OBJECT-TYPE
|
|
SYNTAX IANAipRouteProtocol
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Source protocol to redistribute routes from."
|
|
::= { hpicfRipRedistEntry 1 }
|
|
|
|
hpicfRipRedistEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A flag indicating whether RIP should
|
|
redistribute routes from this source protocol."
|
|
::= { hpicfRipRedistEntry 2 }
|
|
|
|
|
|
hpicfRipRedistRestrictTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfRipRedistRestrictEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of route prefixes for filtering out
|
|
routes that RIP should not redistribute. Any
|
|
route that is contained by a range in this table
|
|
(in other words, has a longer mask than that
|
|
specified by hpicfRipRedistRestrictMask and
|
|
where the route destination ANDed with the
|
|
hpicfRipRedistRestrictMask is equal to
|
|
hpicfRipRedistRestrictAddr) will not be
|
|
redistributed as an external route by RIP."
|
|
::= { hpicfRipObjects 4 }
|
|
|
|
hpicfRipRedistRestrictEntry OBJECT-TYPE
|
|
SYNTAX HpicfRipRedistRestrictEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A single entry in the table. Any route,
|
|
regardless of source protocol which is
|
|
contained within the specified range will not
|
|
be redistributed into RIP. Entries in this
|
|
table are created dynamically using the
|
|
hpicfRipRedistRestrictStatus object."
|
|
INDEX { hpicfRipRedistRestrictAddr,
|
|
hpicfRipRedistRestrictMask }
|
|
::= { hpicfRipRedistRestrictTable 1 }
|
|
|
|
HpicfRipRedistRestrictEntry ::=
|
|
SEQUENCE {
|
|
hpicfRipRedistRestrictAddr IpAddress,
|
|
hpicfRipRedistRestrictMask IpAddress,
|
|
hpicfRipRedistRestrictStatus RowStatus
|
|
}
|
|
|
|
hpicfRipRedistRestrictAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the range of route entries
|
|
to exclude from redistribution into RIP."
|
|
::= { hpicfRipRedistRestrictEntry 1 }
|
|
|
|
hpicfRipRedistRestrictMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The mask for the range of route entries to
|
|
exclude from redistribution into RIP."
|
|
::= { hpicfRipRedistRestrictEntry 2 }
|
|
|
|
hpicfRipRedistRestrictStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of this entry."
|
|
::= { hpicfRipRedistRestrictEntry 3 }
|
|
|
|
|
|
hpicfRipConformance OBJECT IDENTIFIER ::= { hpicfRip 2 }
|
|
|
|
hpicfRipGroups OBJECT IDENTIFIER ::= { hpicfRipConformance 1 }
|
|
|
|
hpicfRipBaseGroup OBJECT-GROUP
|
|
OBJECTS { hpicfRipAdminStatus,
|
|
hpicfRipDefaultMetric,
|
|
hpicfRipAutoSummary }
|
|
STATUS current
|
|
DESCRIPTION "Basic RIP configuration information that is not
|
|
present in the standard RIP MIB."
|
|
::= { hpicfRipGroups 1 }
|
|
|
|
hpicfRipIfGroup OBJECT-GROUP
|
|
OBJECTS { hpicfRipIfConfDoPoison,
|
|
hpicfRipIfConfCost }
|
|
STATUS current
|
|
DESCRIPTION "RIP interface configuration information that is
|
|
not present in the standard RIP MIB."
|
|
::= { hpicfRipGroups 2 }
|
|
|
|
hpicfRipRedistGroup OBJECT-GROUP
|
|
OBJECTS { hpicfRipRedistEnabled,
|
|
hpicfRipRedistRestrictStatus }
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects for controlling the
|
|
redistribution of external routes by RIP."
|
|
::= { hpicfRipGroups 3 }
|
|
|
|
hpicfRipDistanceGroup OBJECT-GROUP
|
|
OBJECTS { hpicfRipDistance }
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects for configuring the
|
|
administrative distance of routes learned by RIP."
|
|
::= { hpicfRipGroups 4 }
|
|
|
|
|
|
hpicfRipCompliances OBJECT IDENTIFIER ::= { hpicfRipConformance 2 }
|
|
|
|
hpicfRipCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for HP Routing switches
|
|
that support RIP."
|
|
MODULE
|
|
MANDATORY-GROUPS { hpicfRipBaseGroup,
|
|
hpicfRipIfGroup }
|
|
|
|
GROUP hpicfRipRedistGroup
|
|
DESCRIPTION "This group is mandatory for systems
|
|
that support route redistribution."
|
|
::= { hpicfRipCompliances 1 }
|
|
|
|
END
|