Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
864 lines
32 KiB
Text
864 lines
32 KiB
Text
HP-ICF-IPCONFIG DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
InetAddress, InetAddressType, InetAddressPrefixLength, InetAddressIPv4,
|
|
InetPortNumber
|
|
FROM INET-ADDRESS-MIB
|
|
ipNetToPhysicalEntry
|
|
FROM IP-MIB
|
|
ifIndex
|
|
FROM IF-MIB
|
|
hpicfCommon
|
|
FROM HP-ICF-OID
|
|
ipv4InterfaceEntry, ipv6InterfaceEntry, IpAddressOriginTC,
|
|
IpAddressStatusTC
|
|
FROM IP-MIB
|
|
tunnelInetConfigEntry
|
|
FROM TUNNEL-MIB;
|
|
|
|
hpicfIpConfig MODULE-IDENTITY
|
|
LAST-UPDATED "200702020000Z" -- JUNE 06,2007
|
|
ORGANIZATION "Hewlett Packard Company,
|
|
ProCurve Networking Business"
|
|
CONTACT-INFO "Hewlett Packard Company
|
|
8000 Foothills Blvd.
|
|
Roseville, CA 95747"
|
|
DESCRIPTION "This MIB module describes objects for basic
|
|
IP address configuration and interface configuration
|
|
for devices in the HP Integrated Communication Facility
|
|
product line."
|
|
|
|
REVISION "200702020000Z" -- JUNE 06, 2007
|
|
DESCRIPTION "Added hpicfIpv6NDDadAttempts to augment the
|
|
hpicfIpv6GlobalConfigObjects."
|
|
|
|
REVISION "200705300000Z" -- MAY 30, 2007
|
|
DESCRIPTION "Added hpicfIpv4InterfaceLocalProxyArp on to the
|
|
hpicfIpv4InterfaceEntry."
|
|
|
|
REVISION "200702020000Z" -- FEBRUARY 02, 2007
|
|
DESCRIPTION "Added hpicfIpv6InterfaceTable to augment the
|
|
Ipv6InterfaceTable."
|
|
|
|
REVISION "200612030000Z" -- DECEMBER 03, 2006
|
|
DESCRIPTION "Added hpicfUdpTunnelMirrorSessionID to augment the
|
|
tunnelInetConfigEntry object in RFC4087."
|
|
|
|
REVISION "200607070000Z" -- JULY 07, 2006
|
|
DESCRIPTION "Added hpicfUdpTunnelSrcPort to augment the
|
|
tunnelInetConfigEntry object in RFC4087."
|
|
|
|
REVISION "200508081600Z" -- August 08, 2005
|
|
DESCRIPTION "Initial version."
|
|
|
|
::= { hpicfCommon 10 }
|
|
|
|
|
|
-- The HP ICF IP configuration group
|
|
|
|
hpicfIpConfigObjects OBJECT IDENTIFIER ::= {hpicfIpConfig 1}
|
|
|
|
-- The HP ICF Address group
|
|
|
|
hpicfIpAddressObjects OBJECT IDENTIFIER ::= {hpicfIpConfigObjects 1}
|
|
|
|
-- The HP ICF IPV4 interface group
|
|
|
|
hpicfIpv4InterfaceObjects OBJECT IDENTIFIER ::= {hpicfIpConfigObjects 2}
|
|
|
|
-- The HP ICF IPV6 config group
|
|
|
|
hpicfIpv6ConfigObjects OBJECT IDENTIFIER ::= {hpicfIpConfig 3}
|
|
|
|
-- The HP ICF IPV6 global config group
|
|
|
|
hpicfIpv6GlobalConfigObjects OBJECT IDENTIFIER ::= {hpicfIpv6ConfigObjects 1}
|
|
|
|
|
|
hpicfIpv6NDObjects OBJECT IDENTIFIER ::= {hpicfIpv6GlobalConfigObjects 1}
|
|
|
|
|
|
-- The HP ICF IPV6 ICMP group
|
|
|
|
hpicfIpv6IcmpObjects OBJECT IDENTIFIER ::= {hpicfIpv6GlobalConfigObjects 2}
|
|
|
|
|
|
-- The HP ICF IPV6 interface group
|
|
|
|
hpicfIpv6InterfaceObjects OBJECT IDENTIFIER ::= {hpicfIpv6ConfigObjects 2}
|
|
|
|
|
|
|
|
|
|
hpicfIpAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfIpAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains manually configured IPv4 and IPv6
|
|
addresses for each interface. An entry in this table
|
|
may not exist in the active state unless all objects
|
|
in the entry are consistent. In particular, the value of
|
|
hpicfIpAddressPrefixLength."
|
|
::= { hpicfIpAddressObjects 1 }
|
|
|
|
|
|
hpicfIpAddressEntry OBJECT-TYPE
|
|
SYNTAX HpicfIpAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the hpicfIpAddressEntry contains a single
|
|
manually configured IP address."
|
|
INDEX { ifIndex,
|
|
hpicfIpAddressAddrType,
|
|
hpicfIpAddressAddr }
|
|
::= { hpicfIpAddressTable 1 }
|
|
|
|
HpicfIpAddressEntry ::=
|
|
SEQUENCE {
|
|
hpicfIpAddressAddrType InetAddressType,
|
|
hpicfIpAddressAddr InetAddress,
|
|
hpicfIpAddressPrefixLength InetAddressPrefixLength,
|
|
hpicfIpAddressType INTEGER,
|
|
hpicfIpAddressRowStatus RowStatus,
|
|
hpicfIpAddressExtendedType INTEGER
|
|
}
|
|
|
|
|
|
hpicfIpAddressAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Type of IP address"
|
|
::= { hpicfIpAddressEntry 1 }
|
|
|
|
|
|
hpicfIpAddressAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address to which this entry's addressing
|
|
information pertains.
|
|
hpicfIpAddressAddr is always interpreted within the
|
|
context of hpicfIpAddressAddrType."
|
|
::= { hpicfIpAddressEntry 2 }
|
|
|
|
|
|
hpicfIpAddressPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The prefix length associated with IP address."
|
|
::= { hpicfIpAddressEntry 3 }
|
|
|
|
|
|
hpicfIpAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unicast(1),
|
|
anycast(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address type. For V4 addresses the value will be
|
|
unicast."
|
|
DEFVAL { unicast }
|
|
::= { hpicfIpAddressEntry 4 }
|
|
|
|
|
|
hpicfIpAddressRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of the IP address entry."
|
|
::= { hpicfIpAddressEntry 5 }
|
|
|
|
hpicfIpAddressExtendedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
eui64(1),
|
|
linkLocal(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address type. For V4 addresses the value will be
|
|
none. For V6 address it can be eui64 and linkLocal also."
|
|
DEFVAL { none }
|
|
::= { hpicfIpAddressEntry 6 }
|
|
|
|
|
|
-- Switch IP Address Table
|
|
|
|
hpicfSwitchIpAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfSwitchIpAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This read only table contains IPV4 and/or IPV6 addresses
|
|
for each interface.
|
|
|
|
These IP Addresses are either manually configured or
|
|
obtained by a dynamic meathod (such as DHCP).
|
|
|
|
This table will hold all manually configured IP Addresses
|
|
that exist in hpicfIpAddressTable except for those entries
|
|
that are not in active state (hpicfIpAddressRowStatus)."
|
|
::= { hpicfIpAddressObjects 2 }
|
|
|
|
|
|
hpicfSwitchIpAddressEntry OBJECT-TYPE
|
|
SYNTAX HpicfSwitchIpAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the hpicfSwitchIpAddressEntry contains a single
|
|
IP address."
|
|
INDEX { ifIndex,
|
|
hpicfSwitchIpAddressAddrType,
|
|
hpicfSwitchIpAddressAddr }
|
|
::= { hpicfSwitchIpAddressTable 1 }
|
|
|
|
HpicfSwitchIpAddressEntry ::=
|
|
SEQUENCE {
|
|
hpicfSwitchIpAddressAddrType InetAddressType,
|
|
hpicfSwitchIpAddressAddr InetAddress,
|
|
hpicfSwitchIpAddressPrefixLength InetAddressPrefixLength,
|
|
hpicfSwitchIpAddressType INTEGER,
|
|
hpicfSwitchIpAddressOrigin IpAddressOriginTC,
|
|
hpicfSwitchIpAddressStatus IpAddressStatusTC,
|
|
hpicfSwitchIpAddressPreferredLifetime Unsigned32,
|
|
hpicfSwitchIpAddressValidLifetime Unsigned32,
|
|
hpicfSwitchIpAddressExtendedType INTEGER
|
|
}
|
|
|
|
|
|
hpicfSwitchIpAddressAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Type of IP address."
|
|
::= { hpicfSwitchIpAddressEntry 1 }
|
|
|
|
|
|
hpicfSwitchIpAddressAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address to which this entry's addressing
|
|
information pertains.
|
|
hpicfSwitchIpAddressAddr is always interpreted within the
|
|
context of hpicfSwitchIpAddressAddrType."
|
|
::= { hpicfSwitchIpAddressEntry 2 }
|
|
|
|
|
|
hpicfSwitchIpAddressPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The prefix length associated with IP address."
|
|
::= { hpicfSwitchIpAddressEntry 3 }
|
|
|
|
|
|
hpicfSwitchIpAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unicast(1),
|
|
anycast(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address type. For V4 addresses the value will be
|
|
unicast."
|
|
::= { hpicfSwitchIpAddressEntry 4 }
|
|
|
|
hpicfSwitchIpAddressOrigin OBJECT-TYPE
|
|
SYNTAX IpAddressOriginTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The origin of the address."
|
|
::= { hpicfSwitchIpAddressEntry 5 }
|
|
|
|
hpicfSwitchIpAddressStatus OBJECT-TYPE
|
|
SYNTAX IpAddressStatusTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the address, describing if the address can be
|
|
used for communication.
|
|
In the absence of other information, an IPv4 address is
|
|
always preferred(1)."
|
|
DEFVAL { preferred }
|
|
::= { hpicfSwitchIpAddressEntry 6 }
|
|
|
|
hpicfSwitchIpAddressPreferredLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remaining length of time in seconds that this address
|
|
will continue to be preferred, i.e. time until deprecation.
|
|
A value of 4,294,967,295 represents infinity.
|
|
The address generated from a deprecated address should no
|
|
longer be used as a source address in new communications,
|
|
but packets received on such an interface are processed as
|
|
expected.
|
|
The default for IPv4 addresses is 4,294,967,295 (infinity)."
|
|
REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462"
|
|
::= { hpicfSwitchIpAddressEntry 7 }
|
|
|
|
|
|
hpicfSwitchIpAddressValidLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remaining length of time, in seconds, that this address
|
|
will continue to be valid, i.e. time until invalidation. A
|
|
value of 4,294,967,295 represents infinity.
|
|
The address generated from an invalidated address should not
|
|
appear as the destination or source address of a packet.
|
|
The default for IPv4 addresses is 4,294,967,295 (infinity)."
|
|
REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462"
|
|
::= { hpicfSwitchIpAddressEntry 8 }
|
|
|
|
hpicfSwitchIpAddressExtendedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
eui64(1),
|
|
linkLocal(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address type. For V4 addresses the value will be
|
|
none. For V6 address it can be eui64 and linkLocal also."
|
|
DEFVAL { none }
|
|
::= { hpicfSwitchIpAddressEntry 9 }
|
|
|
|
hpicfIpNetToPhysicalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfIpNetToPhysicalEntry
|
|
|
|
MAX-ACCESS not-accessible
|
|
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"This table augments ipNeTtoPhysicalTable"
|
|
|
|
::= {hpicfIpAddressObjects 3 }
|
|
|
|
hpicfIpNetToPhysicalEntry OBJECT-TYPE
|
|
SYNTAX HpicfIpNetToPhysicalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table augments ipNeTtoPhysicalTable"
|
|
AUGMENTS { ipNetToPhysicalEntry }
|
|
::= { hpicfIpNetToPhysicalTable 1 }
|
|
|
|
HpicfIpNetToPhysicalEntry ::=
|
|
SEQUENCE {
|
|
hpicfIpNetToPhysicalPort Integer32
|
|
}
|
|
|
|
hpicfIpNetToPhysicalPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the port through which the
|
|
physical address was learnt"
|
|
::= { hpicfIpNetToPhysicalEntry 1}
|
|
|
|
|
|
|
|
-- V4 Interface Table
|
|
|
|
hpicfIpv4InterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfIpv4InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains per-interface IPV4 configuration
|
|
information."
|
|
::= { hpicfIpv4InterfaceObjects 1 }
|
|
|
|
|
|
hpicfIpv4InterfaceEntry OBJECT-TYPE
|
|
SYNTAX HpicfIpv4InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the hpicfIpv4InterfaceEntry contains IPV4
|
|
interface specific configuration information. This table
|
|
is indexed by ipv4InterfaceIfIndex."
|
|
AUGMENTS { ipv4InterfaceEntry }
|
|
::= { hpicfIpv4InterfaceTable 1 }
|
|
|
|
|
|
HpicfIpv4InterfaceEntry ::=
|
|
SEQUENCE {
|
|
hpicfIpv4InterfaceDhcpEnable INTEGER,
|
|
hpicfIpv4InterfaceForwarding INTEGER,
|
|
hpicfIpv4InterfaceProxyArp INTEGER,
|
|
hpicfIpv4InterfaceLocalProxyArp INTEGER,
|
|
hpicfIpv4InterfaceBootpGateway InetAddressIPv4
|
|
}
|
|
|
|
hpicfIpv4InterfaceDhcpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full(1),
|
|
off(2),
|
|
inform(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Changing this flag to 'full' will clear any existing
|
|
IP address configuration for this interface and
|
|
will cause the device to use a dynamic method
|
|
(e.g. DHCP) to obtain its IP configuration and
|
|
other configuration parameter (such as gateway,
|
|
time of day, etc...) for this interface.
|
|
|
|
Setting this flag to 'inform' will allow manual IP
|
|
address configuration and yet permit other configuration
|
|
parameters (such as gateway, time of day, etc...) to
|
|
be obtained from a DHCP server.
|
|
|
|
Setting this flag to 'off' will allow manual IP
|
|
configuration but disallow any DHCP configuration."
|
|
DEFVAL { full }
|
|
::= { hpicfIpv4InterfaceEntry 1 }
|
|
|
|
|
|
hpicfIpv4InterfaceForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This flag indicates whether this interface is forwarding
|
|
the datagrams that were not addressed to this interface.
|
|
|
|
Setting this flag to 'enabled' (the default) results
|
|
in forwarding the datagrams that were not addressed to
|
|
this interface.
|
|
|
|
Setting this flag to 'disabled' results in ignoring
|
|
datagrams that were not addressed to this entity."
|
|
DEFVAL { enabled }
|
|
::= { hpicfIpv4InterfaceEntry 2 }
|
|
|
|
|
|
hpicfIpv4InterfaceProxyArp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables/disables ARP proxy on the interface. If set
|
|
to 'enabled', the switch will respond on ARP request
|
|
for IP addresses from other subnets.
|
|
If set to disabled (the default), the switch will not
|
|
respond on ARP request for IP addresses from other
|
|
subnets."
|
|
DEFVAL { disabled }
|
|
::= { hpicfIpv4InterfaceEntry 3 }
|
|
|
|
hpicfIpv4InterfaceLocalProxyArp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables/disables local ARP proxy on the interface. If set
|
|
to 'enabled', the switch will respond on ARP request
|
|
for IP addresses within the local subnet.
|
|
If set to disabled (the default), the switch will not
|
|
respond on ARP request for IP addresses within the
|
|
local subnet."
|
|
DEFVAL { disabled }
|
|
::= { hpicfIpv4InterfaceEntry 4 }
|
|
|
|
hpicfIpv4InterfaceBootpGateway OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This entry will contain the IP address of the
|
|
BOOTP gateway for the interface."
|
|
::= { hpicfIpv4InterfaceEntry 5 }
|
|
|
|
-- V6 Global Objects
|
|
hpicfIpv6NDDadAttempts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value in this object indicates the maximum number of
|
|
neighbour solicitation requests that will be sent while
|
|
performing duplicate address detection."
|
|
|
|
::= { hpicfIpv6NDObjects 1 }
|
|
|
|
-- V6 Global Icmp Objects
|
|
hpicfIpv6IcmpErrorInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value in this object indicates the error interval
|
|
in which the token bucket algorithm places one token
|
|
in the bucket for ICMPV6 rate limiting.Each token
|
|
represents the right to send one ICMP error message.
|
|
Each time an error is sent, it takes a token from the bucket.
|
|
ICMP will not be allowed to originate an error
|
|
message if the bucket is empty."
|
|
::= { hpicfIpv6IcmpObjects 1 }
|
|
|
|
hpicfIpv6IcmpBucketsize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value in this object indicates the maximum number of
|
|
tokens that can be in the bucket."
|
|
::= { hpicfIpv6IcmpObjects 2 }
|
|
|
|
-- V6 Interface Table
|
|
|
|
hpicfIpv6InterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfIpv6InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains per-interface IPV6 configuration
|
|
information."
|
|
::= { hpicfIpv6InterfaceObjects 1 }
|
|
|
|
|
|
hpicfIpv6InterfaceEntry OBJECT-TYPE
|
|
SYNTAX HpicfIpv6InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the hpicfIpv6InterfaceEntry contains IPV6
|
|
interface specific configuration information. This table
|
|
is indexed by ipv6InterfaceIfIndex."
|
|
AUGMENTS { ipv6InterfaceEntry }
|
|
::= { hpicfIpv6InterfaceTable 1 }
|
|
|
|
|
|
HpicfIpv6InterfaceEntry ::=
|
|
SEQUENCE {
|
|
hpicfIpv6InterfaceDhcpMode INTEGER,
|
|
hpicfIpv6InterfaceManual INTEGER,
|
|
hpicfIpv6InterfaceAutoConfig INTEGER,
|
|
hpicfIpv6InterfaceDhcpRapidCommit INTEGER,
|
|
hpicfIpv6InterfaceDhcpRelay INTEGER,
|
|
hpicfIpv6InterfaceCfgEnableStatus INTEGER
|
|
}
|
|
|
|
|
|
hpicfIpv6InterfaceDhcpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
dhcpFull(1),
|
|
dhcpInform(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this flag to 'dhcpFull' will clear any existing
|
|
IP address configuration for this interface and
|
|
will cause the device to use a dynamic method
|
|
(e.g. DHCP) to obtain its IP configuration and
|
|
other configuration parameter (such as gateway,
|
|
time of day, etc...) for this interface.
|
|
|
|
Setting this flag to 'dhcpInform' will allow manual IP
|
|
address configuration and yet permit other configuration
|
|
parameters (such as gateway, time of day, etc...) to
|
|
be obtained from a DHCP server.
|
|
|
|
Setting this flag to 'disabled' will not allow any of the
|
|
above mentioned two configuration, but interface can
|
|
have link-local, auto-config and manual ip-address."
|
|
DEFVAL { disabled }
|
|
::= { hpicfIpv6InterfaceEntry 1 }
|
|
|
|
hpicfIpv6InterfaceManual OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this flag to 'enabled' will allow manual IP
|
|
address configuration but disallow any DHCP configuration."
|
|
DEFVAL { disabled }
|
|
::= { hpicfIpv6InterfaceEntry 2 }
|
|
|
|
hpicfIpv6InterfaceAutoConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this flag to 'enabled' will allow host to
|
|
configure automatically from default router.
|
|
There may be multiple routers and in that scenario switch will
|
|
add the addresses from all these routers"
|
|
DEFVAL { disabled }
|
|
::= { hpicfIpv6InterfaceEntry 3 }
|
|
|
|
hpicfIpv6InterfaceDhcpRapidCommit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this flag to 'enabled' will allow the host to get
|
|
address and configuration information from the dhcp server
|
|
rapidly. This flag can be enabled only if the
|
|
hpicfIpv6InterfaceDhcpMode object is set as dhcpFull.
|
|
By default this flag is set to disabled."
|
|
DEFVAL { disabled }
|
|
::= { hpicfIpv6InterfaceEntry 4 }
|
|
|
|
hpicfIpv6InterfaceDhcpRelay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This flag indicates whether this interface is dhcp-relay
|
|
enabled. By default this flag is set to disabled."
|
|
DEFVAL { enabled }
|
|
::= { hpicfIpv6InterfaceEntry 5 }
|
|
|
|
hpicfIpv6InterfaceCfgEnableStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The indication of whether IPv6 is enabled (up) or disabled
|
|
(down) on this interface.
|
|
Setting this object to up(1) will enable ipv6 for the given
|
|
interface.Setting this object to down(2) will disable the ipv6
|
|
for the interface only if hpicfIpv6InterfaceDhcpMode,
|
|
hpicfIpv6InterfaceManual and hpicfIpv6InterfaceAutoConfig are
|
|
disabled.A get on this object reflects the data saved in a
|
|
non-volatile storage.
|
|
Note:To get the current ipv6 status for an interface refer to
|
|
ipv6InterfaceEnableStatus."
|
|
::= { hpicfIpv6InterfaceEntry 6 }
|
|
|
|
-- **********************************************************************
|
|
-- Remote mirroring tunnel Objects
|
|
-- **********************************************************************
|
|
|
|
hpicfUdpTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfUdpTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains per interface IPV4
|
|
Udp encapsulated tunnel specific configuration
|
|
information."
|
|
::= { hpicfIpv4InterfaceObjects 3 }
|
|
|
|
|
|
hpicfUdpTunnelEntry OBJECT-TYPE
|
|
SYNTAX HpicfUdpTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the hpicfUdpTunnelEntry contains
|
|
Udp encapsulated tunnel specific configuration
|
|
information."
|
|
AUGMENTS { tunnelInetConfigEntry }
|
|
::= { hpicfUdpTunnelTable 1 }
|
|
|
|
|
|
HpicfUdpTunnelEntry ::=
|
|
SEQUENCE {
|
|
hpicfUdpTunnelSrcPort InetPortNumber,
|
|
hpicfUdpTunnelMirrorSessionID Integer32
|
|
}
|
|
|
|
hpicfUdpTunnelSrcPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This variable is valid only for the remote
|
|
mirroring source or destination switch.
|
|
The value will be ignored otherwise. A
|
|
value of 0 means that the UDP port
|
|
is irrelevant for the tunnel type. If this
|
|
value is non-zero it must be duplicated
|
|
in the tunnelInetConfigID value (this
|
|
will ensure that a given UDP port can
|
|
only be associated once with a given
|
|
tunnelInetConfigAddressType,
|
|
tunnelInetConfigLocalAddress,
|
|
tunnelInetConfigRemoteAddress,
|
|
tunnelInetConfigEncapsMethod combination)."
|
|
DEFVAL { 0 }
|
|
::= { hpicfUdpTunnelEntry 1 }
|
|
|
|
hpicfUdpTunnelMirrorSessionID OBJECT-TYPE
|
|
SYNTAX Integer32(0..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This variable is valid only for a remote
|
|
mirroring switch which interfaces with the
|
|
source end of the tunnel.
|
|
The value will be ignored otherwise. A
|
|
value of 0 means that the mirror session ID
|
|
is irrelevant for the tunnel type. "
|
|
DEFVAL { 0 }
|
|
::= { hpicfUdpTunnelEntry 2 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- Conformance information
|
|
-- **********************************************************************
|
|
|
|
hpicfIpConfigConformance OBJECT IDENTIFIER ::= {hpicfIpConfig 2}
|
|
|
|
hpicfIpConfigCompliances OBJECT IDENTIFIER ::= {hpicfIpConfigConformance 1}
|
|
hpicfIpConfigGroups OBJECT IDENTIFIER ::= {hpicfIpConfigConformance 2}
|
|
|
|
|
|
-- **********************************************************************
|
|
-- Compliance statements
|
|
-- **********************************************************************
|
|
|
|
|
|
hpicfIpConfigCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION "
|
|
A compliance statement for HP Routing switches with IP
|
|
Configuration"
|
|
MODULE
|
|
MANDATORY-GROUPS { hpicfIpAddressTableGroup,
|
|
hpicfIpv4InterfaceTableGroup,
|
|
hpicfSwitchIpAddressTableGroup }
|
|
|
|
OBJECT hpicfIpv4InterfaceDhcpEnable
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION "An agent is not required to implement inform (3)
|
|
state."
|
|
|
|
::= { hpicfIpConfigCompliances 1 }
|
|
|
|
hpicfIpConfigCompliance2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "
|
|
A compliance statement for HP Routing switches with IP
|
|
Configuration"
|
|
MODULE
|
|
MANDATORY-GROUPS { hpicfIpAddressTableGroup,
|
|
hpicfIpv4InterfaceTableGroup,
|
|
hpicfSwitchIpAddressTableGroup }
|
|
|
|
GROUP hpicfUdpTunnelTableGroup
|
|
DESCRIPTION "This group is valid only for the remote
|
|
mirroring source or destination switch.
|
|
The value will be ignored otherwise."
|
|
OBJECT hpicfIpv4InterfaceDhcpEnable
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION "An agent is not required to implement inform (3)
|
|
state."
|
|
::= { hpicfIpConfigCompliances 2 }
|
|
|
|
|
|
hpicfIpConfigCompliance4 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "
|
|
A compliance statement for HP Routing switches with IP
|
|
Configuration"
|
|
MODULE
|
|
MANDATORY-GROUPS { hpicfIpAddressTableGroup,
|
|
hpicfIpv4InterfaceTableGroup2,
|
|
hpicfSwitchIpAddressTableGroup,
|
|
hpicfIpv6InterfaceTableGroup }
|
|
|
|
GROUP hpicfUdpTunnelTableGroup
|
|
DESCRIPTION "This group is valid only for the remote
|
|
mirroring source or destination switch.
|
|
The value will be ignored otherwise."
|
|
OBJECT hpicfIpv4InterfaceDhcpEnable
|
|
MIN-ACCESS read-write
|
|
DESCRIPTION "An agent is not required to implement inform (3)
|
|
state."
|
|
::= { hpicfIpConfigCompliances 4 }
|
|
|
|
hpicfIpAddressTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hpicfIpAddressPrefixLength,
|
|
hpicfIpAddressType,
|
|
hpicfIpAddressRowStatus,
|
|
hpicfIpAddressExtendedType }
|
|
STATUS current
|
|
DESCRIPTION "A Collection of objects allowing configuration of
|
|
an IP address for an interface."
|
|
::= { hpicfIpConfigGroups 1 }
|
|
|
|
hpicfSwitchIpAddressTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hpicfSwitchIpAddressAddrType,
|
|
hpicfSwitchIpAddressAddr}
|
|
STATUS current
|
|
DESCRIPTION "A Collection of objects providing interfaces addressing
|
|
information."
|
|
::= { hpicfIpConfigGroups 2 }
|
|
|
|
|
|
hpicfIpv4InterfaceTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hpicfIpv4InterfaceDhcpEnable,
|
|
hpicfIpv4InterfaceForwarding,
|
|
hpicfIpv4InterfaceProxyArp }
|
|
STATUS deprecated
|
|
DESCRIPTION "Deprecated - see hpicfIpv4InterfaceTableGroup2"
|
|
::= { hpicfIpConfigGroups 3 }
|
|
|
|
|
|
hpicfUdpTunnelTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hpicfUdpTunnelSrcPort,
|
|
hpicfUdpTunnelMirrorSessionID }
|
|
STATUS current
|
|
DESCRIPTION "A Collection of objects that allows IPV4 interface
|
|
configuration for remote mirroring"
|
|
::= { hpicfIpConfigGroups 4 }
|
|
|
|
|
|
hpicfIpv6InterfaceTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hpicfIpv6InterfaceDhcpMode,
|
|
hpicfIpv6InterfaceManual,
|
|
hpicfIpv6InterfaceAutoConfig,
|
|
hpicfIpv6InterfaceDhcpRapidCommit,
|
|
hpicfIpv6InterfaceDhcpRelay }
|
|
STATUS current
|
|
DESCRIPTION "A Collection of objects that allows IPV6 interface
|
|
configuration"
|
|
::= { hpicfIpConfigGroups 5 }
|
|
|
|
hpicfIpv4InterfaceTableGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
hpicfIpv4InterfaceDhcpEnable,
|
|
hpicfIpv4InterfaceForwarding,
|
|
hpicfIpv4InterfaceProxyArp,
|
|
hpicfIpv4InterfaceLocalProxyArp }
|
|
STATUS current
|
|
DESCRIPTION "A Collection of objects that allows IPV4 interface
|
|
configuration"
|
|
::= { hpicfIpConfigGroups 6 }
|
|
|
|
|
|
|
|
END
|