Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2842 lines
116 KiB
Text
2842 lines
116 KiB
Text
-- HP Enterprise Switch Configuration MIB
|
|
|
|
|
|
CONFIG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
dot1dStpPortState, dot1dStpPortDesignatedBridge,
|
|
dot1dStpPortDesignatedPort
|
|
FROM BRIDGE-MIB -- RFC-1493
|
|
DisplayString, RowStatus, MacAddress, TimeStamp
|
|
FROM SNMPv2-TC
|
|
HpSwitchPortType, ConfigStatus
|
|
FROM HP-ICF-TC
|
|
hpSwitch
|
|
FROM HP-ICF-OID
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB;
|
|
|
|
-- type.
|
|
Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
|
|
|
|
-- Icf Switch Specific
|
|
hpConfig OBJECT IDENTIFIER ::= { hpSwitch 7 }
|
|
|
|
VlanID ::= INTEGER (1..65535)
|
|
|
|
|
|
-- ###########################################################
|
|
-- the hpConfig Group
|
|
|
|
-- This group contains switch configuration related variables.
|
|
-- ###########################################################
|
|
|
|
hpSwitchConfig OBJECT IDENTIFIER ::= { hpConfig 1 }
|
|
|
|
hpSwitchSystemConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 1 }
|
|
|
|
hpSwitchAutoReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "If the value of this variable was set to yes(1),
|
|
booting will conditionally enable all application
|
|
modules-the spanning tree, IP and IPX etc.. Otherwise
|
|
every application module must be manually enabled
|
|
through Network Control Language Interpreter's ENABLE
|
|
command."
|
|
::= { hpSwitchSystemConfig 1 }
|
|
|
|
hpSwitchTimeZone OBJECT-TYPE
|
|
SYNTAX INTEGER (-720..840)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of minutes to the east of Greenwich Mean
|
|
Time(GMT). For a location west of GMT, use a negative
|
|
integer."
|
|
::= { hpSwitchSystemConfig 2 }
|
|
|
|
hpSwitchDaylightTimeRule OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
alaska(2),
|
|
canadaAndContinentalUS(3),
|
|
middleEuropeAndPortugal(4),
|
|
southernHemisphere(5),
|
|
westernEurop(6),
|
|
userDefined(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The daylight savings time rule for use by the
|
|
Internet's RFC 868 Time protocol."
|
|
::= { hpSwitchSystemConfig 3 }
|
|
|
|
hpSwitchDaylightBeginningMonth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The month that daylight saving time starts if
|
|
DaylightTimeRule is set to userDefined."
|
|
::= { hpSwitchSystemConfig 4 }
|
|
|
|
hpSwitchDaylightBeginningDay OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The day of the month that daylight saving time
|
|
starts if DaylightTimeRule is set to userDefined."
|
|
::= { hpSwitchSystemConfig 5 }
|
|
|
|
hpSwitchDaylightEndingMonth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The month that daylight saving time ends if
|
|
DaylightTimeRule is set to userDefined."
|
|
::= { hpSwitchSystemConfig 6 }
|
|
|
|
hpSwitchDaylightEndingDay OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The day of the month that daylight saving time emds
|
|
if DaylightTimeRule is set to userDefined."
|
|
::= { hpSwitchSystemConfig 7 }
|
|
|
|
hpSwitchSystemConfigStatus OBJECT-TYPE
|
|
SYNTAX ConfigStatus
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The configuration status of this group of objects.
|
|
If one or more variables in this group were
|
|
reconfigurated since last reboot and required reboot
|
|
to take effect, the value of this variable will be
|
|
set to notInService."
|
|
::= { hpSwitchSystemConfig 8 }
|
|
|
|
hpSwitchSystemPortLEDMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
link-activity(1),
|
|
link-only(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The mode of the port LED can be either link/activity
|
|
(link for 3 seconds then activity thereafter) or
|
|
link-only."
|
|
::= { hpSwitchSystemConfig 9 }
|
|
|
|
hpSwitchControlUnknownIPMulticast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "When enabled along with IGMP, any IP Multicast packets
|
|
that are not already controlled by IGMP will be
|
|
restricted to ports that have detected a multicast
|
|
router or ports configured to always forward IP
|
|
multicast. When set to disabled or when IGMP is
|
|
disabled, the unknown IP Multicast packets will be
|
|
flooded out all ports in the VLAN"
|
|
::= { hpSwitchSystemConfig 10 }
|
|
|
|
hpSwitchIgmpDelayedGroupFlushTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This feature is disabled by default, which is indicated
|
|
by a timer value of 0 seconds. When IGMP is enabled and
|
|
the value of the Delayed Group Flush Timer is not zero,
|
|
traffic filters for any previously-joined IGMP groups
|
|
which no longer have active members will persist for
|
|
the number of seconds indicated by the timer. This has
|
|
the effect of dropping any additional unjoined traffic
|
|
for an empty group until the Delayed Group Flush Timer
|
|
expires, at which time the traffic filter is then
|
|
removed."
|
|
::= { hpSwitchSystemConfig 11 }
|
|
|
|
hpSwitchMaxFrameSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This is the value of the global jumbos max-frame-size
|
|
supported by the switch. The default value for this is
|
|
set to 9216, in order to make it compatible with
|
|
previous versions of software. This configuration does
|
|
not take a reboot to take effect."
|
|
::= { hpSwitchSystemConfig 12 }
|
|
|
|
hpSwitchIpMTU OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This is the value of the global jumbos IP MTU or L3 MTU
|
|
supported by the switch. The default value for this is
|
|
set to 9198, in order to make it compatible with
|
|
previous versions of software. This configuration does
|
|
not take a reboot to take effect."
|
|
::= { hpSwitchSystemConfig 13 }
|
|
|
|
|
|
hpSwitchConsoleConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 2 }
|
|
|
|
hpSwitchTelnetAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The status of the console telnet operation."
|
|
::= { hpSwitchConsoleConfig 1 }
|
|
|
|
hpSwitchTerminalType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vt100(2),
|
|
ansi(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Terminal type of the console device."
|
|
::= { hpSwitchConsoleConfig 2 }
|
|
|
|
hpSwitchConsoleRefRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
refRate1(1),
|
|
refRate3(3),
|
|
refRate5(5),
|
|
refRate10(10),
|
|
refRate20(20),
|
|
refRate30(30),
|
|
refRate45(45),
|
|
refRate(60)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The rate, in second per cycle, at which the display
|
|
of various switch measurements."
|
|
::= { hpSwitchConsoleConfig 3 }
|
|
|
|
hpSwitchDisplayedEvent OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
major(2),
|
|
notInfo(3),
|
|
all(4),
|
|
debug(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of event messages are automatically
|
|
displayed on the console."
|
|
::= { hpSwitchConsoleConfig 4 }
|
|
|
|
hpSwitchConsoleConfigStatus OBJECT-TYPE
|
|
SYNTAX ConfigStatus
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The configuration status of this group of objects.
|
|
If one or more variables in this group were
|
|
reconfigurated since last reboot and required reboot
|
|
to take effect, the value of this variable will be
|
|
set to notInService."
|
|
::= { hpSwitchConsoleConfig 5 }
|
|
|
|
|
|
|
|
hpSwitchPortConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 3 }
|
|
|
|
hpSwitchPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the current
|
|
port status in this device."
|
|
::= { hpSwitchPortConfig 1 }
|
|
|
|
hpSwitchPortEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Information about a specific port status in this
|
|
device."
|
|
INDEX { hpSwitchPortIndex }
|
|
::= { hpSwitchPortTable 1 }
|
|
|
|
HpSwitchPortEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchPortIndex INTEGER,
|
|
hpSwitchPortType HpSwitchPortType,
|
|
hpSwitchPortDescr DisplayString,
|
|
hpSwitchPortAdminStatus INTEGER,
|
|
hpSwitchPortEtherMode INTEGER,
|
|
hpSwitchPortVgMode INTEGER,
|
|
hpSwitchPortLinkbeat INTEGER,
|
|
hpSwitchPortTrunkGroup INTEGER,
|
|
hpSwitchPortBcastLimit INTEGER,
|
|
hpSwitchPortFastEtherMode INTEGER,
|
|
hpSwitchPortFlowControl INTEGER,
|
|
-- hpSwitchPortBcastPktLimit INTEGER,
|
|
hpSwitchPortTrunkType INTEGER,
|
|
hpSwitchPortTrunkLACPStatus INTEGER,
|
|
hpSwitchPortMDIXStatus INTEGER,
|
|
hpSwitchPortAutoMDIX INTEGER
|
|
}
|
|
|
|
hpSwitchPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The ifIndex value which uniquely identifies a row in
|
|
the Interfaces Table."
|
|
::= { hpSwitchPortEntry 1 }
|
|
|
|
hpSwitchPortType OBJECT-TYPE
|
|
SYNTAX HpSwitchPortType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of port."
|
|
::= { hpSwitchPortEntry 2 }
|
|
|
|
hpSwitchPortDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "A textual string containing information about the
|
|
interface."
|
|
::= { hpSwitchPortEntry 3 }
|
|
|
|
hpSwitchPortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The desired state of the interface. This variable is
|
|
similar to the ifAdminStatus but instead of keeping
|
|
the operational status, this variable maintain the
|
|
desired state in the configuration data base."
|
|
::= { hpSwitchPortEntry 4 }
|
|
|
|
hpSwitchPortEtherMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
half-duplex(1),
|
|
full-duplex(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of transmission on this port. This
|
|
variable is valid only if the hpSwitchPortType
|
|
was Ethernet."
|
|
::= { hpSwitchPortEntry 5 }
|
|
|
|
hpSwitchPortVgMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
master(1),
|
|
endNode(2),
|
|
autoDetect(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of transmission on this port. This variable
|
|
is valid only if the hpSwitchPortType was VG."
|
|
::= { hpSwitchPortEntry 6 }
|
|
|
|
hpSwitchPortLinkbeat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The linkbeat status of this port."
|
|
::= { hpSwitchPortEntry 7 }
|
|
|
|
hpSwitchPortTrunkGroup OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The trunk group this port belong to."
|
|
::= { hpSwitchPortEntry 8 }
|
|
|
|
hpSwitchPortBcastLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..99)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The percentage of network bandwidth consumed by
|
|
broadcast traffic through this port. If the value of
|
|
this variable is 0, there will be no broadcast limit."
|
|
::= { hpSwitchPortEntry 9 }
|
|
|
|
hpSwitchPortFastEtherMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
half-duplex-10Mbits(1),
|
|
half-duplex-100Mbits(2),
|
|
full-duplex-10Mbits(3),
|
|
full-duplex-100Mbits(4),
|
|
auto-neg(5),
|
|
full-duplex-1000Mbits(6),
|
|
auto-10Mbits(7),
|
|
auto-100Mbits(8),
|
|
auto-1000Mbits(9),
|
|
full-duplex-10Gbits(10),
|
|
auto-10-100Mbits(11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of transmission on this port. This variable
|
|
is valid only if the hpSwitchPortType was Fast
|
|
Ethernet."
|
|
::= { hpSwitchPortEntry 10 }
|
|
|
|
hpSwitchPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The Flow Control of this port."
|
|
::= { hpSwitchPortEntry 11}
|
|
|
|
-- hpSwitchPortBcastPktLimit OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..1500000)
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION "Network bandwidth in packets per second consumed
|
|
-- by broadcast traffic through this port. If the value
|
|
-- of this variable is 0, there will be no broadcast
|
|
-- limit."
|
|
-- ::= { hpSwitchPortEntry 12 }
|
|
|
|
hpSwitchPortTrunkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
trunk(1),
|
|
fecAuto(2),
|
|
saTrunk(3),
|
|
lacpTrk(4),
|
|
none(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Used in conjunction with hpSwitchPortTrunkGroup to
|
|
determine what type of trunk and which group it
|
|
belongs to. If hpSwitchPortTrunkGroup is set to 0,
|
|
trunking is disabled on the port and this variable
|
|
becomes a 'don't care'"
|
|
::= { hpSwitchPortEntry 13 }
|
|
|
|
hpSwitchPortTrunkLACPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
active(2),
|
|
passive(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Used in conjunction with hpSwitchPortTrunkType.
|
|
When the trunk is a LACP trunk, this variable defines
|
|
its administrative status"
|
|
::= { hpSwitchPortEntry 14 }
|
|
|
|
hpSwitchPortMDIXStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(1),
|
|
mdi(2),
|
|
mdix(3),
|
|
automdix(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Shows the MDI/MDIX setting for an RJ-45 port.
|
|
Returns a value of 'not-applicable' for all
|
|
ports except RJ-45 ports."
|
|
::= { hpSwitchPortEntry 15 }
|
|
|
|
hpSwitchPortAutoMDIX OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-applicable(1),
|
|
mdi(2),
|
|
mdix(3),
|
|
automdix(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Sets the MDI/MDIX value for an RJ-45 port.
|
|
Negates need for crossover cables. 'automdix',
|
|
'mdi', or 'mdix' may be set when the port
|
|
configuration is set to any auto-negotiation mode,
|
|
for example 'auto' or 'auto-100', or to any of the
|
|
fixed-configuration modes, for example '100-full'.
|
|
The MDI/MDIX value is maintained across port
|
|
configuration mode changes."
|
|
::= { hpSwitchPortEntry 16 }
|
|
|
|
hpSwitchPortConfigStatus OBJECT-TYPE
|
|
SYNTAX ConfigStatus
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The configuration status of this group of objects. If
|
|
one or more variables in this group were
|
|
reconfigured since last reboot and required reboot to
|
|
take effect, the value of this variable will be set to
|
|
notInService."
|
|
::= { hpSwitchPortConfig 2 }
|
|
|
|
|
|
hpSwitchIpxConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 4 }
|
|
|
|
hpSwitchIpxConfigStatus OBJECT-TYPE
|
|
SYNTAX ConfigStatus
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the IPX configuration table."
|
|
::= { hpSwitchIpxConfig 2 }
|
|
|
|
|
|
hpSwitchIpConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 5 }
|
|
|
|
hpSwitchIpTimepAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
disable(2),
|
|
dhcp(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the Time protocol."
|
|
::= { hpSwitchIpConfig 1 }
|
|
|
|
hpSwitchIpTimepServerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "### deprecated ### The IP address of the Time server."
|
|
::= { hpSwitchIpConfig 2 }
|
|
|
|
hpSwitchIpTimepPollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The client poll interval of the Time server in
|
|
minutes."
|
|
::= { hpSwitchIpConfig 3 }
|
|
|
|
hpSwitchIpConfigStatus OBJECT-TYPE
|
|
SYNTAX ConfigStatus
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The configuration status of the Timep and IP
|
|
related objects."
|
|
::= { hpSwitchIpConfig 5 }
|
|
|
|
hpSwitchIpTftpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
secure(1),
|
|
unsecure(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational mode of the Tftp protocol."
|
|
::= { hpSwitchIpConfig 6 }
|
|
|
|
hpSwitchIpTimepInetServerAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP address type of the Time server."
|
|
::= { hpSwitchIpConfig 7 }
|
|
|
|
hpSwitchIpTimepInetServerAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP address (of the Time server)to which this entry's
|
|
addressing information pertains.
|
|
hpSwitchIpTimepInetServerAddr is always interpreted within
|
|
the context of hpSwitchIpTimepInetServerAddrType."
|
|
::= { hpSwitchIpConfig 8 }
|
|
|
|
|
|
hpSwitchSerialLinkConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 6 }
|
|
|
|
hpSwitchSLinkBaudRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
speedSense(1),
|
|
baudRate300(2),
|
|
baudRate600(3),
|
|
baudRate1200(4),
|
|
baudRate2400(5),
|
|
baudRate4800(6),
|
|
baudRate9600(7),
|
|
baudRate19200(8),
|
|
baudRate38400(9),
|
|
baudRate57600(10),
|
|
baudRate115200(11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The rate of data transfer between the console and
|
|
the node. baudRate1 is speed sense."
|
|
::= { hpSwitchSerialLinkConfig 1 }
|
|
|
|
hpSwitchSLinkFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
xonXoff(2),
|
|
robustXonXoff(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The flow-control mechanism between the console and
|
|
the switch."
|
|
::= { hpSwitchSerialLinkConfig 2 }
|
|
|
|
hpSwitchSLinkConnInactTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..120)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of minutes to wait after no character was
|
|
input to log out the console. Valid values are 0 (not
|
|
to log out of the console for inactivity) through 120
|
|
(two hours)."
|
|
::= { hpSwitchSerialLinkConfig 3 }
|
|
|
|
hpSwitchSLinkModemConnTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..300)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of seconds to wait for data mode and
|
|
clear to send and receiver ready signals after
|
|
asserting request to send and terminal ready signals.
|
|
Valid values are 0 (switch will wait forever for the
|
|
modem) through 300 (5 minutes)."
|
|
::= { hpSwitchSerialLinkConfig 4 }
|
|
|
|
hpSwitchSLinkModemLostRecvTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of milliseconds the receiver ready signal
|
|
is allowed to drop before the switch will disconnect
|
|
the modem. Valid values are 0 (the switch will wait
|
|
forever) through 5000 (5 seconds)."
|
|
::= { hpSwitchSerialLinkConfig 5 }
|
|
|
|
hpSwitchSLinkModemDisConnTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of seconds to wait after the modem is
|
|
disconnected before allowing the modem to be
|
|
reconnected. Valid values are 0 (allow a connection
|
|
as soon as possible, the default) through 60 (1
|
|
minute)."
|
|
::= { hpSwitchSerialLinkConfig 6 }
|
|
|
|
hpSwitchSLinkParity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
parityNone(1),
|
|
parityOdd(2),
|
|
parityEven(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of parity to use between the console and
|
|
the node."
|
|
::= { hpSwitchSerialLinkConfig 7 }
|
|
|
|
hpSwitchSLinkCharBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
char8Bits(1),
|
|
char7Bits(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of bits per character to use between
|
|
the console and the node."
|
|
::= { hpSwitchSerialLinkConfig 8 }
|
|
|
|
hpSwitchSLinkStopBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stop1Bits(1),
|
|
stop1andHalfBits(2),
|
|
stop2Bits(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of stop bots to use when communicating
|
|
between the console and the node."
|
|
::= { hpSwitchSerialLinkConfig 9 }
|
|
|
|
hpSwitchSLinkConfigStatus OBJECT-TYPE
|
|
SYNTAX ConfigStatus
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The configuration status of this group of objects.
|
|
If one or more variables in this group were
|
|
reconfigured since last reboot and required reboot
|
|
to take effect, the value of this variable will be
|
|
set to notInService."
|
|
::= { hpSwitchSerialLinkConfig 10 }
|
|
|
|
|
|
hpSwitchFilterConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 8 }
|
|
|
|
-- A sample of the traffic filter
|
|
|
|
-- type MacAddr ProType SrcPort PortMask
|
|
|
|
-- unicast MAC address X port # Bit Mask of ports
|
|
-- multicast MAC address X X Bit Mask of ports
|
|
-- port X X port # Bit Mask of ports
|
|
-- level 3 X protocol X Bit Mask of ports
|
|
|
|
hpSwitchFilterConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchFilterConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the
|
|
traffic filter configuration in this device."
|
|
::= { hpSwitchFilterConfig 1 }
|
|
|
|
hpSwitchFilterConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchFilterConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Information about a traffic filter configuration
|
|
in this device."
|
|
INDEX { hpSwitchFilterIndex }
|
|
::= { hpSwitchFilterConfigTable 1 }
|
|
|
|
HpSwitchFilterConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchFilterIndex INTEGER,
|
|
hpSwitchFilterType INTEGER,
|
|
hpSwitchFilterSrcPort INTEGER,
|
|
hpSwitchFilterMacAddr MacAddress,
|
|
hpSwitchFilterProtocolType INTEGER,
|
|
hpSwitchFilterPortMask OCTET STRING,
|
|
hpSwitchFilterEntryStatus RowStatus
|
|
}
|
|
|
|
hpSwitchFilterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "An index that uniquely identifies a traffic filter
|
|
for which this entry contains information."
|
|
::= { hpSwitchFilterConfigEntry 1 }
|
|
|
|
hpSwitchFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
multicast(1),
|
|
level-3(2),
|
|
port(3),
|
|
unicast(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of filter."
|
|
::= { hpSwitchFilterConfigEntry 2 }
|
|
|
|
hpSwitchFilterSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This variable is required when a port filter or
|
|
unicast filter was configurated. It will be ignored
|
|
otherwise."
|
|
::= { hpSwitchFilterConfigEntry 3 }
|
|
|
|
hpSwitchFilterMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This variable is valid only if a unicast or
|
|
multicast filter was defined. It will be ignored
|
|
otherwise."
|
|
::= { hpSwitchFilterConfigEntry 4 }
|
|
|
|
hpSwitchFilterProtocolType OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This variable is valid only if a level-3 filter
|
|
was defined. It will be ignored otherwise. This
|
|
variable will contain either a etherType (DIX
|
|
Ethernet) or SAP(IEEE 802) value of the level-3
|
|
protocol."
|
|
::= { hpSwitchFilterConfigEntry 5 }
|
|
|
|
hpSwitchFilterPortMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This variable specifies a group of ports whose
|
|
traffic will be filtered. Each octet within the value
|
|
of this object specifies a set of eight ports, with
|
|
the first octet specifying ports 1 through 8, the
|
|
second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the switch is represented by a single bit within
|
|
the value of this object."
|
|
::= { hpSwitchFilterConfigEntry 6 }
|
|
|
|
hpSwitchFilterEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of a filter entry."
|
|
::= { hpSwitchFilterConfigEntry 7 }
|
|
|
|
|
|
hpSwitchProbeConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 9 }
|
|
|
|
hpSwitchProbeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ports(1),
|
|
vlan(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "If the value of this variable is equal to 1, the
|
|
probe will monitor those ports specified by
|
|
hpSwitchProbedPortMask, otherwise all of the port
|
|
belong to the virtual LAN specified by
|
|
hpSwitchProbedVlanId will be monitored."
|
|
::= { hpSwitchProbeConfig 1 }
|
|
|
|
hpSwitchProbedVlanId OBJECT-TYPE
|
|
SYNTAX VlanID
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The probed virtual LAN."
|
|
::= { hpSwitchProbeConfig 2 }
|
|
|
|
hpSwitchProbePort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The port that every packet passes through those
|
|
probed ports will be copied to."
|
|
::= { hpSwitchProbeConfig 3 }
|
|
|
|
hpSwitchProbeAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The operational status of the probing function"
|
|
::= { hpSwitchProbeConfig 4 }
|
|
|
|
hpSwitchProbedPortMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "This variable specifies a group of ports which will
|
|
be probed. Each octet within the value of this
|
|
object specifies a set of eight ports, with the
|
|
first octet specifying ports 1 through 8, the second
|
|
octet specifying ports 9 through 16, etc. Within each
|
|
octet, the most significant bit represents the lowest
|
|
numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the switch is represented by a single bit within
|
|
the value of this object."
|
|
::= { hpSwitchProbeConfig 5 }
|
|
|
|
|
|
-- The FDDI IP Fragmention Configuration group
|
|
|
|
hpSwitchFddiIpFragConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 11 }
|
|
|
|
-- The FDDI IP Fragmention Configuration Table
|
|
|
|
hpSwitchFddiIpFragConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchFddiIpFragConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A list of IP fragmentation configuration
|
|
parameters for the FDDI cards in the switch."
|
|
::= { hpSwitchFddiIpFragConfig 1 }
|
|
|
|
hpSwitchFddiIpFragConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchFddiIpFragConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An Fddi IP fragmentation entry which is
|
|
containing configurable options for the FDDI
|
|
cards in the switch."
|
|
INDEX { hpSwitchFddiIpFragConfigIndex }
|
|
::= { hpSwitchFddiIpFragConfigTable 1 }
|
|
|
|
HpSwitchFddiIpFragConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchFddiIpFragConfigIndex INTEGER,
|
|
hpSwitchFddiIpFragConfigStatus INTEGER
|
|
}
|
|
|
|
hpSwitchFddiIpFragConfigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "A unique value for each FDDI Card.
|
|
The value for each FDDI card must remain constant
|
|
at least from one re-initialization of the entity's
|
|
network management system to the next
|
|
re-initialization."
|
|
::= { hpSwitchFddiIpFragConfigEntry 1 }
|
|
|
|
hpSwitchFddiIpFragConfigStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of FDDI IP fragmentation
|
|
for each FDDI card.
|
|
enable(1): FDDI card will fragment all packets which
|
|
are bigger then the Ethernet packet size
|
|
limitation, 1518 Bytes.
|
|
disable(2): FDDI card will drop all packets which
|
|
are bigger then the Ethernet packet size
|
|
limitation, 1518 Bytes."
|
|
::= { hpSwitchFddiIpFragConfigEntry 2 }
|
|
|
|
|
|
hpSwitchABCConfig OBJECT IDENTIFIER ::= {hpSwitchConfig 12 }
|
|
|
|
hpSwitchABCConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchABCConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A list of Automatic Broadcast Control (ABC
|
|
disable/enable entries for each VLAN on the switch."
|
|
::= { hpSwitchABCConfig 1 }
|
|
|
|
hpSwitchABCConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchABCConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Contains the ABC status for each VLAN on the switch,
|
|
including IP RIP control and IPX RIP/SAP control."
|
|
INDEX { hpSwitchABCConfigVlan }
|
|
::= { hpSwitchABCConfigTable 1 }
|
|
|
|
HpSwitchABCConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchABCConfigVlan VlanID,
|
|
hpSwitchABCConfigControl INTEGER,
|
|
hpSwitchABCConfigIpRipControl INTEGER,
|
|
hpSwitchABCConfigIpxRipSapControl INTEGER,
|
|
hpSwitchABCConfigVlanBcastLimit INTEGER,
|
|
-- hpSwitchABCConfigVlanBcastPktLimit INTEGER,
|
|
hpSwitchABCConfigAutoGatewayConfig INTEGER
|
|
}
|
|
|
|
hpSwitchABCConfigVlan OBJECT-TYPE
|
|
SYNTAX VlanID
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The user is able to enable/disable ABC on a per VLAN
|
|
basis, so the VLAN serves as an index into the ABC
|
|
configuration table."
|
|
::= { hpSwitchABCConfigEntry 1 }
|
|
|
|
hpSwitchABCConfigControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipipx(1),
|
|
ip(2),
|
|
ipx(3),
|
|
disable(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "ABC control is either IP&IPX or IP or IPX or disabled
|
|
for each VLAN on the switch."
|
|
::= { hpSwitchABCConfigEntry 2 }
|
|
|
|
hpSwitchABCConfigIpRipControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "IP RIP control. If this feature is enabled then IP
|
|
RIP packets will only be forwarded on ports, within
|
|
its VLAN domain, that have heard RIPs before. If
|
|
this feature is disabled then IP RIP packets seen by
|
|
a given port will be forwarded to all ports within its
|
|
VLAN domain."
|
|
::= { hpSwitchABCConfigEntry 3 }
|
|
|
|
hpSwitchABCConfigIpxRipSapControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "IPX RIP/SAP control. If this feature is enabled then
|
|
IPX RIP/SAP packets will only be forwarded on ports,
|
|
within its VLAN domain, that have previously seen
|
|
RIP/SAP packets. If this feature is disabled then
|
|
IPX RIP and SAP packets seen by a given port will be
|
|
forwarded to all ports within its VLAN domain."
|
|
::= { hpSwitchABCConfigEntry 4 }
|
|
|
|
hpSwitchABCConfigVlanBcastLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..99)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The percentage of network bandwidth consumed by
|
|
broadcast traffic through VLAN. If the value of this
|
|
variable is 0, there will be no broadcast limit. There
|
|
is a default value chosen when ABC is enabled."
|
|
::= { hpSwitchABCConfigEntry 5 }
|
|
|
|
-- hpSwitchABCConfigVlanBcastPktLimit OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..2147483647)
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION "Network bandwidth in packets per second consumed
|
|
-- by broadcast traffic through VLAN. If the value of
|
|
-- this variable is 0, there will be no broadcast limit.
|
|
-- There is a default value chosen when ABC is enabled."
|
|
-- ::= { hpSwitchABCConfigEntry 6 }
|
|
|
|
hpSwitchABCConfigAutoGatewayConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "If this feature is enabled then DHCP packets both
|
|
ucast and bcast with UDP destination port 68 will be
|
|
intercepted. DHCP packets with the router option in
|
|
the options field in the DHCP message will be
|
|
modified so that the first daddress in the router
|
|
option is the same as the clients address. Thus the
|
|
client will be its own default gateway. If this
|
|
feature is disabled DHCP packtes will be forwarded as
|
|
usual."
|
|
::= { hpSwitchABCConfigEntry 7 }
|
|
|
|
|
|
hpSwitchStpConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 14 }
|
|
|
|
hpSwitchStpVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchStpVlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains vlan-specific information
|
|
for the Spanning Tree Protocol."
|
|
::= { hpSwitchStpConfig 1}
|
|
|
|
hpSwitchStpVlanEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchStpVlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A list of information maintained by every port
|
|
about the Spanning Tree Protocol state for that
|
|
port."
|
|
INDEX { hpSwitchStpVlan }
|
|
::= { hpSwitchStpVlanTable 1 }
|
|
|
|
HpSwitchStpVlanEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchStpVlan VlanID,
|
|
hpSwitchStpAdminStatus INTEGER,
|
|
hpSwitchStpPriority INTEGER,
|
|
hpSwitchStpMaxAge Timeout,
|
|
hpSwitchStpHelloTime Timeout,
|
|
hpSwitchStpForwardDelay Timeout
|
|
}
|
|
|
|
hpSwitchStpVlan OBJECT-TYPE
|
|
SYNTAX VlanID
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the spanning tree
|
|
protocol."
|
|
::= { hpSwitchStpVlanEntry 1 }
|
|
|
|
hpSwitchStpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the spanning tree
|
|
protocol."
|
|
::= { hpSwitchStpVlanEntry 2 }
|
|
|
|
hpSwitchStpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The value of the write-able portion of the Bridge
|
|
ID, i.e., the first two octets of the (8 octet
|
|
long) Bridge ID. The other (last) 6 octets of the
|
|
Bridge ID are given by the value of
|
|
dot1dBaseBridgeAddress."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.7"
|
|
::= { hpSwitchStpVlanEntry 3 }
|
|
|
|
hpSwitchStpMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum age of Spanning Tree Protocol
|
|
information learned from the network on any port
|
|
before it is discarded, in units of hundredths of
|
|
a second. This is the actual value that this
|
|
bridge is currently using."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.4"
|
|
::= { hpSwitchStpVlanEntry 4 }
|
|
|
|
hpSwitchStpHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port
|
|
when it is the root of the spanning tree or trying
|
|
to become so, in units of hundredths of a second.
|
|
This is the actual value that this bridge is
|
|
currently using."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5"
|
|
::= { hpSwitchStpVlanEntry 5 }
|
|
|
|
hpSwitchStpForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This time value, measured in units of hundredths
|
|
of a second, controls how fast a port changes its
|
|
spanning state when moving towards the Forwarding
|
|
state. The value determines how long the port
|
|
stays in each of the Listening and Learning
|
|
states, which precede the Forwarding state. This
|
|
value is also used, when a topology change has
|
|
been detected and is underway, to age all dynamic
|
|
entries in the Forwarding Database. [Note that
|
|
this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
dot1dBridgeForwardDelay which is the value that
|
|
this bridge and all others would start using
|
|
if/when this bridge were to become the root.]"
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6"
|
|
::= { hpSwitchStpVlanEntry 6 }
|
|
|
|
hpSwitchStpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchStpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains port-specific information
|
|
for the Spanning Tree Protocol."
|
|
::= { hpSwitchStpConfig 2 }
|
|
|
|
hpSwitchStpPortEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchStpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A list of information maintained by every port
|
|
about the Spanning Tree Protocol state for that
|
|
port."
|
|
INDEX { hpSwitchStpPort }
|
|
::= { hpSwitchStpPortTable 1 }
|
|
|
|
HpSwitchStpPortEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchStpPort INTEGER,
|
|
hpSwitchStpPortType HpSwitchPortType,
|
|
hpSwitchStpPortSrcMac MacAddress,
|
|
hpSwitchStpPortPriority INTEGER,
|
|
hpSwitchStpPortPathCost INTEGER,
|
|
hpSwitchStpPortMode INTEGER,
|
|
hpSwitchStpPortBpduFilter INTEGER,
|
|
hpSwitchStpPortBpduProtection INTEGER,
|
|
hpSwitchStpPortErrantBpduCounter Counter,
|
|
hpSwitchStpPortPvstFilter INTEGER,
|
|
hpSwitchStpPortPvstProtection INTEGER
|
|
}
|
|
|
|
hpSwitchStpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.2.1.2"
|
|
::= { hpSwitchStpPortEntry 1 }
|
|
|
|
hpSwitchStpPortType OBJECT-TYPE
|
|
SYNTAX HpSwitchPortType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of port."
|
|
::= { hpSwitchStpPortEntry 2 }
|
|
|
|
hpSwitchStpPortSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The source MAC address used by the spanning
|
|
tree protocol."
|
|
::= { hpSwitchStpPortEntry 3 }
|
|
|
|
hpSwitchStpPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The value of the priority field which is
|
|
contained in the first (in network byte order)
|
|
octet of the (2 octet long) Port ID. The other
|
|
octet of the Port ID is given by the value of
|
|
dot1dStpPort."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.1"
|
|
::= { hpSwitchStpPortEntry 4 }
|
|
|
|
hpSwitchStpPortPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1990 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.3"
|
|
::= { hpSwitchStpPortEntry 5 }
|
|
|
|
hpSwitchStpPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
fast(2),
|
|
uplink(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "If the value of this variable is set to fast(2), the
|
|
port will go directly into the Forwarding State when a
|
|
device is connected to it. Use this feature only on
|
|
ports that are connected to an individual PC or
|
|
Workstation, to allow these ports to come up and
|
|
move quickly to the Forwarding State instead of going
|
|
through the normal STP initialization process.
|
|
|
|
Caution: Changing the value of this variable to fast(2)
|
|
on ports connected to a hub or switch may cause loops
|
|
in your network."
|
|
::= { hpSwitchStpPortEntry 6 }
|
|
|
|
hpSwitchStpPortBpduFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION "Setting True will cause port to ignore ingress BPDUs
|
|
and not generate egress BPDUs, as the result the port
|
|
will stay in forwarding state. Default is False."
|
|
DEFVAL { false }
|
|
::= { hpSwitchStpPortEntry 7 }
|
|
|
|
hpSwitchStpPortBpduProtection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION "Setting True indicates that no BPDUs are expected to
|
|
be received on this port. At the reception of BPDUs
|
|
the BPDU protection mechanism will disable this port
|
|
and port will transition into bpduError state.
|
|
Default is False."
|
|
DEFVAL { false }
|
|
::= { hpSwitchStpPortEntry 8 }
|
|
|
|
hpSwitchStpPortErrantBpduCounter OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION "Counts the number of BPDUs that were not expected
|
|
to be received on this port. This counter gets
|
|
incremented only if hpSwitchStpPortBpduProtection,
|
|
hpSwitchStpPortBpduFilter, hpSwitchStpPortPvstFilter,
|
|
or hpSwitchStpPvstProtection is True for the port,
|
|
otherwise it is cleared to zero."
|
|
::= { hpSwitchStpPortEntry 9 }
|
|
|
|
hpSwitchStpPortPvstFilter OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION "Setting True will cause the port to ignore incoming
|
|
PVST BPDUs.
|
|
Default is False."
|
|
DEFVAL { false }
|
|
::= { hpSwitchStpPortEntry 10 }
|
|
|
|
hpSwitchStpPortPvstProtection OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION "Setting True indicates that any PVST BPDUs arriving
|
|
on this port should be discarded and that this will
|
|
cause the port to be disabled. The port will remain
|
|
disabled for the time period indicated by
|
|
hpSwitchStpBpduProtectionTimeout.
|
|
Default is False."
|
|
DEFVAL { false }
|
|
::= { hpSwitchStpPortEntry 11 }
|
|
|
|
hpSwitchStpTrapCntl OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
errantBpdu(0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION "Controls generation of SNMP traps by STP-enabled switch
|
|
for events defined in this MIB.
|
|
The set bit means 'enabled'.
|
|
|
|
- errantBpdu(0)
|
|
The state of this bit specifies whether the
|
|
notification trap allowed to be send when
|
|
unexpected (errant) BPDU is received on a port."
|
|
|
|
::= { hpSwitchStpConfig 3 }
|
|
|
|
hpSwitchStpBpduProtectionTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION "The duration of time in seconds when a protected port
|
|
affected by receiving of an unauthorized BPDU will
|
|
remain in down state. The zero value means infinity."
|
|
DEFVAL { 0 }
|
|
::= { hpSwitchStpConfig 4 }
|
|
|
|
hpSwitchIgmpConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 15 }
|
|
|
|
hpSwitchIgmpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchIgmpConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the IGMP
|
|
Querier capacity or High Priority Forward
|
|
configuration on any given vlan on the switch."
|
|
::= { hpSwitchIgmpConfig 1 }
|
|
|
|
hpSwitchIgmpConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchIgmpConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Information about the IGMP Querier feature associated
|
|
with a specific virtal LAN in this device."
|
|
INDEX { hpSwitchIgmpVlanIndex }
|
|
::= { hpSwitchIgmpConfigTable 1 }
|
|
|
|
HpSwitchIgmpConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchIgmpVlanIndex VlanID,
|
|
hpSwitchIgmpState INTEGER,
|
|
hpSwitchIgmpQuerierState INTEGER,
|
|
hpSwitchIgmpPriorityState INTEGER,
|
|
hpSwitchIgmpQuerierInterval INTEGER
|
|
}
|
|
|
|
hpSwitchIgmpVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanID
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "An index that uniquely identifies the IGMP
|
|
configuration of a virtual LAN for which this entry
|
|
contains information."
|
|
::= { hpSwitchIgmpConfigEntry 1 }
|
|
|
|
hpSwitchIgmpState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the IGMP support for
|
|
this virtual LAN."
|
|
::= { hpSwitchIgmpConfigEntry 2 }
|
|
|
|
hpSwitchIgmpQuerierState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the IGMP Querier
|
|
functionality for this virtual LAN."
|
|
::= { hpSwitchIgmpConfigEntry 3 }
|
|
|
|
hpSwitchIgmpPriorityState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the IGMP Forward with High
|
|
Priority mode for this virtual LAN."
|
|
::= { hpSwitchIgmpConfigEntry 4 }
|
|
|
|
hpSwitchIgmpQuerierInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (5..300)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The time (in seconds) to wait between Querier
|
|
election cycles for this virtual LAN."
|
|
::= { hpSwitchIgmpConfigEntry 5 }
|
|
|
|
hpSwitchIgmpPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchIgmpPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the IGMP port
|
|
configurations on this switch."
|
|
::= { hpSwitchIgmpConfig 2 }
|
|
|
|
hpSwitchIgmpPortConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchIgmpPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The information associated with each IGMP port
|
|
configuration."
|
|
INDEX { hpSwitchIgmpPortIndex }
|
|
::= { hpSwitchIgmpPortConfigTable 1 }
|
|
|
|
HpSwitchIgmpPortConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchIgmpPortIndex INTEGER,
|
|
hpSwitchIgmpPortType HpSwitchPortType,
|
|
hpSwitchIgmpIpMcastState INTEGER
|
|
}
|
|
|
|
hpSwitchIgmpPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The ifIndex value which uniquely identifies a row in
|
|
the Interfaces Table."
|
|
::= { hpSwitchIgmpPortConfigEntry 1 }
|
|
|
|
hpSwitchIgmpPortType OBJECT-TYPE
|
|
SYNTAX HpSwitchPortType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of port."
|
|
::= { hpSwitchIgmpPortConfigEntry 2 }
|
|
|
|
hpSwitchIgmpIpMcastState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
auto(1),
|
|
blocked(2),
|
|
forward(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the IGMP feature for this
|
|
port or trunk. 1 implies that all IP Multicast
|
|
traffic will be monitored on the port, 2 implies that
|
|
IP Multicast traffic will be dropped on the port, and
|
|
3 implies that all IP Multicast traffic will be
|
|
forwarded without the switch examining it."
|
|
::= { hpSwitchIgmpPortConfigEntry 3 }
|
|
|
|
|
|
hpSwitchIgmpPortConfigTable2 OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchIgmpPortConfigEntry2
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the IGMP port
|
|
configurations on this switch. This table supercedes
|
|
hpSwitchIgmpPortConfigTable for products which support
|
|
multiple VLANs on each port."
|
|
::= { hpSwitchIgmpConfig 3 }
|
|
|
|
hpSwitchIgmpPortConfigEntry2 OBJECT-TYPE
|
|
SYNTAX HpSwitchIgmpPortConfigEntry2
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The information associated with each IGMP port
|
|
configuration."
|
|
INDEX { hpSwitchIgmpPortVlanIndex2, hpSwitchIgmpPortIndex2 }
|
|
::= { hpSwitchIgmpPortConfigTable2 1 }
|
|
|
|
HpSwitchIgmpPortConfigEntry2 ::=
|
|
SEQUENCE {
|
|
hpSwitchIgmpPortVlanIndex2 INTEGER,
|
|
hpSwitchIgmpPortIndex2 INTEGER,
|
|
hpSwitchIgmpPortType2 HpSwitchPortType,
|
|
hpSwitchIgmpIpMcastState2 INTEGER,
|
|
hpSwitchIgmpPortForcedLeaveState INTEGER,
|
|
hpSwitchIgmpPortFastLeaveState INTEGER
|
|
}
|
|
|
|
hpSwitchIgmpPortVlanIndex2 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Vlan Index value which uniquely identifies a row
|
|
in the Interfaces Table."
|
|
::= { hpSwitchIgmpPortConfigEntry2 1 }
|
|
|
|
hpSwitchIgmpPortIndex2 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The ifIndex value which uniquely identifies a row in
|
|
the Interfaces Table."
|
|
::= { hpSwitchIgmpPortConfigEntry2 2 }
|
|
|
|
hpSwitchIgmpPortType2 OBJECT-TYPE
|
|
SYNTAX HpSwitchPortType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of port."
|
|
::= { hpSwitchIgmpPortConfigEntry2 3 }
|
|
|
|
hpSwitchIgmpIpMcastState2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
blocked(2),
|
|
forward(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the IGMP feature for this
|
|
port or trunk. 1 implies that all IP Multicast traffic
|
|
will be monitored on the port, 2 implies that
|
|
IP Multicast traffic will be dropped on the port, and
|
|
3 implies that all IP Multicast traffic will be
|
|
forwarded without the switch examining it."
|
|
::= { hpSwitchIgmpPortConfigEntry2 4 }
|
|
|
|
hpSwitchIgmpPortForcedLeaveState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the IGMP feature for this
|
|
port or trunk indicates whether any IGMP V2 Leaves
|
|
received for an IP Multicast group will cause the
|
|
group to be deleted after the
|
|
hpSwitchIgmpForcedLeaveInterval if no new IGMP V2
|
|
Reports are received for that group. Normal behavior
|
|
is for a group issuing a Leave to be deleted after
|
|
the Querier's Maximum Response time if no IGMP V2
|
|
Report is received."
|
|
::= { hpSwitchIgmpPortConfigEntry2 5 }
|
|
|
|
hpSwitchIgmpPortFastLeaveState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the IGMP feature for this
|
|
port or trunk indicates whether any IGMP V2 Leaves
|
|
received for an IP Multicast group will cause the
|
|
group to be deleted immediately on single-
|
|
connection ports. Normal behavior is for a group
|
|
issuing a Leave to be deleted after the Querier's
|
|
Maximum Response time if no IGMP V2 Report is
|
|
received."
|
|
::= { hpSwitchIgmpPortConfigEntry2 6 }
|
|
|
|
hpSwitchIgmpForcedLeaveInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "When a port's hpSwitchIgmpPortForcedLeaveState is
|
|
enabled, this is the amount of time allowed for an
|
|
IGMP V2 Report to arrive and cancel deletion of a
|
|
multicast group requested by a previous IGMP V2
|
|
Leave request."
|
|
::= { hpSwitchIgmpConfig 4 }
|
|
|
|
|
|
-- CoS support MIB definition
|
|
hpSwitchCosConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 17 }
|
|
|
|
hpSwitchCosPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchCosPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the CoS port
|
|
configurations on this switch."
|
|
::= { hpSwitchCosConfig 1 }
|
|
|
|
hpSwitchCosPortConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchCosPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The information associated with each CoS port
|
|
configuration."
|
|
INDEX { hpSwitchCosPortIndex }
|
|
::= { hpSwitchCosPortConfigTable 1 }
|
|
|
|
HpSwitchCosPortConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchCosPortIndex INTEGER,
|
|
hpSwitchCosPortType HpSwitchPortType,
|
|
hpSwitchCosPortPriority INTEGER,
|
|
hpSwitchCosPortDSCPPolicy INTEGER,
|
|
hpSwitchCosPortResolvedPriority INTEGER,
|
|
hpSwitchCosPortApplyPolicy INTEGER
|
|
}
|
|
|
|
hpSwitchCosPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The ifIndex value which uniquely identifies a row
|
|
in the Interfaces Table."
|
|
::= { hpSwitchCosPortConfigEntry 1 }
|
|
|
|
hpSwitchCosPortType OBJECT-TYPE
|
|
SYNTAX HpSwitchPortType
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The type of port."
|
|
::= { hpSwitchCosPortConfigEntry 2 }
|
|
|
|
hpSwitchCosPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority value to assign to packets
|
|
received on the specified port. This value will be
|
|
inserted in the 802.1Q tag and the packet will be
|
|
placed in the appropriate outbound port queue. The
|
|
value of 255 is used to indicate No Override."
|
|
::= { hpSwitchCosPortConfigEntry 3 }
|
|
|
|
hpSwitchCosPortDSCPPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The DSCP Policy to assign to packets received on
|
|
the specified Port. This is an index into the
|
|
hpSwitchCosDSCPPolicy table, or the value 255
|
|
indicating no DSCP Policy exists. This policy is
|
|
associated with an 802.1p priority value, which will
|
|
be inserted in the 802.1Q tag and will cause the
|
|
packet to be placed in the appropriate outbound port
|
|
queue. When the packet is IP protocol type, the DSCP
|
|
policy value (a Differentiated Services codepoint)
|
|
will also be written into the Differentiated-Services
|
|
field of the IP Type-of-Service byte."
|
|
::= { hpSwitchCosPortConfigEntry 4 }
|
|
|
|
hpSwitchCosPortResolvedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7 | 255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority that will be applied to packets
|
|
received on the specified port. This value
|
|
represents the actual operating value for this CoS
|
|
port entry. A value of 255 represents no override
|
|
of the incoming priority."
|
|
::= { hpSwitchCosPortConfigEntry 5 }
|
|
|
|
hpSwitchCosPortApplyPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noPolicyOverride(1),
|
|
applyHpSwitchCosPortPriority(2),
|
|
applyHpSwitchCosPortDSCPPolicy(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object determines which configuration policy,
|
|
noPolicyOverride, hpSwitchCosPortPriority or
|
|
hpSwitchCosPortDSCPPolicy, applies for the given
|
|
Port CoS entry. These configuration policies are
|
|
mutually exclusive of one another."
|
|
::= { hpSwitchCosPortConfigEntry 6 }
|
|
|
|
|
|
hpSwitchCosVlanConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchCosVlanConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the CoS Vlan
|
|
configurations on this switch."
|
|
::= { hpSwitchCosConfig 2 }
|
|
|
|
hpSwitchCosVlanConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchCosVlanConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The information associated with each CoS Vlan
|
|
configuration."
|
|
INDEX { hpSwitchCosVlanIndex }
|
|
::= { hpSwitchCosVlanConfigTable 1 }
|
|
|
|
HpSwitchCosVlanConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchCosVlanIndex VlanID,
|
|
hpSwitchCosVlanPriority INTEGER,
|
|
hpSwitchCosVlanDSCPPolicy INTEGER,
|
|
hpSwitchCosVlanResolvedPriority INTEGER,
|
|
hpSwitchCosVlanApplyPolicy INTEGER
|
|
}
|
|
|
|
hpSwitchCosVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanID
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The index that uniquely identifies the CoS
|
|
configuration of a virtual LAN for which this entry
|
|
contains information."
|
|
::= { hpSwitchCosVlanConfigEntry 1 }
|
|
|
|
hpSwitchCosVlanPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority value to assign to packets
|
|
received on the specified Vlan. This value will be
|
|
inserted in the 802.1Q tag and the packet will be
|
|
placed in the appropriate outbound port queue. The
|
|
value of 255 is used to indicate No Override."
|
|
::= { hpSwitchCosVlanConfigEntry 2 }
|
|
|
|
hpSwitchCosVlanDSCPPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The DSCP Policy to assign to packets received on
|
|
the specified Vlan. This is an index into the
|
|
hpSwitchCosDSCPPolicy table, or the value 255
|
|
indicating no DSCP Policy exists. This policy is
|
|
associated with an 802.1p priority value, which
|
|
will be inserted in the 802.1Q tag and will cause
|
|
the packet to be placed in the appropriate outbound
|
|
port queue. When the packet is IP protocol type,
|
|
the DSCP policy value (a Differentiated Services
|
|
codepoint) will also be written into the
|
|
Differentiated-Services field of the IP
|
|
Type-of-Service byte."
|
|
::= { hpSwitchCosVlanConfigEntry 3 }
|
|
|
|
hpSwitchCosVlanResolvedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7 | 255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority that will be applied to
|
|
packets received on the specified VLAN. This value
|
|
represents the actual operating value for this CoS
|
|
vlan entry. A value of 255 represents no override of
|
|
the incoming priority ."
|
|
::= { hpSwitchCosVlanConfigEntry 4 }
|
|
|
|
hpSwitchCosVlanApplyPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noPolicyOverride(1),
|
|
applyHpSwitchCosVlanPriority(2),
|
|
applyHpSwitchCosVlanDSCPPolicy(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object determines which configuration policy,
|
|
noPolicyOverride, hpSwitchCosVlanPriority or
|
|
hpSwitchCosDSCPPolicy, applies for this given Vlan
|
|
CoS entry. These configuration policies are mutually
|
|
exclusive of one another."
|
|
::= { hpSwitchCosVlanConfigEntry 5 }
|
|
|
|
|
|
hpSwitchCosProtocolConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchCosProtocolConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the CoS
|
|
protocol type configurations on this switch."
|
|
::= { hpSwitchCosConfig 3 }
|
|
|
|
hpSwitchCosProtocolConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchCosProtocolConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The information associated with each CoS protocol
|
|
configuration."
|
|
INDEX { hpSwitchCosProtocolType }
|
|
::= { hpSwitchCosProtocolConfigTable 1 }
|
|
|
|
HpSwitchCosProtocolConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchCosProtocolType INTEGER,
|
|
hpSwitchCosProtocolPriority INTEGER
|
|
}
|
|
|
|
hpSwitchCosProtocolType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ip(1),
|
|
ipx(2),
|
|
arp(3),
|
|
decnet(4),
|
|
appletalk(5),
|
|
sna(6),
|
|
netbios(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Packets with this protocol type will receive the new
|
|
priority value."
|
|
::= { hpSwitchCosProtocolConfigEntry 1 }
|
|
|
|
hpSwitchCosProtocolPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority value to assign to packets
|
|
received for the specified protocol. This value will
|
|
be inserted in the 802.1Q tag and the packet will be
|
|
placed in the appropriate outbound port queue. The
|
|
value of 255 is used to indicate No Override."
|
|
::= { hpSwitchCosProtocolConfigEntry 2 }
|
|
|
|
|
|
hpSwitchCosAddressConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchCosAddressConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the CoS
|
|
address configurations on this switch."
|
|
::= { hpSwitchCosConfig 4 }
|
|
|
|
hpSwitchCosAddressConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchCosAddressConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The information associated with each CoS address
|
|
configuration."
|
|
INDEX { hpSwitchCosAddressIndex }
|
|
::= { hpSwitchCosAddressConfigTable 1 }
|
|
|
|
HpSwitchCosAddressConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchCosAddressIndex INTEGER,
|
|
hpSwitchCosAddressType INTEGER,
|
|
hpSwitchCosAddressIp IpAddress,
|
|
hpSwitchCosAddressPriority INTEGER,
|
|
hpSwitchCosAddressStatus RowStatus,
|
|
hpSwitchCosAddressDSCPPolicy INTEGER,
|
|
hpSwitchCosAddressResolvedPriority INTEGER,
|
|
hpSwitchCosAddressApplyPolicy INTEGER
|
|
}
|
|
|
|
hpSwitchCosAddressIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The index that uniquely identifies the CoS
|
|
configuration for an address for which this entry
|
|
contains information."
|
|
::= { hpSwitchCosAddressConfigEntry 1 }
|
|
|
|
hpSwitchCosAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ip(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of address to configure."
|
|
::= { hpSwitchCosAddressConfigEntry 2 }
|
|
|
|
hpSwitchCosAddressIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This variable is valid only if an IP CoS
|
|
configuration was defined. It will be ignored
|
|
otherwise. Packets with this IP address as a source
|
|
or destination will receive the new priority value."
|
|
::= { hpSwitchCosAddressConfigEntry 3 }
|
|
|
|
hpSwitchCosAddressPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority value to assign to packets
|
|
received for the specified address. This value will
|
|
be inserted in the 802.1Q tag and the packet will be
|
|
placed in the appropriate outbound port queue."
|
|
::= { hpSwitchCosAddressConfigEntry 4 }
|
|
|
|
hpSwitchCosAddressStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of a Cos Address entry."
|
|
::= { hpSwitchCosAddressConfigEntry 5 }
|
|
|
|
hpSwitchCosAddressDSCPPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The DSCP Policy to assign to packets received for
|
|
the specified address. This is an index into the
|
|
hpSwitchCosDSCPPolicy table, or the value 255
|
|
indicating no DSCP Policy exists. This policy is
|
|
associated with an 802.1p priority value, which
|
|
will be inserted in the 802.1Q tag and will cause
|
|
the packet to be placed in the appropriate outbound
|
|
port queue. The DSCP policy value (a Differentiated
|
|
Services codepoint) will also be written into the
|
|
Differentiated-Services field of the IP
|
|
Type-of-Service byte."
|
|
::= { hpSwitchCosAddressConfigEntry 6 }
|
|
|
|
hpSwitchCosAddressResolvedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7 | 255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority that will be applied to packets
|
|
received for the specified address. This value
|
|
represents the actual operating value for this given
|
|
address entry. A value of 255 represents no override."
|
|
::= { hpSwitchCosAddressConfigEntry 7 }
|
|
|
|
hpSwitchCosAddressApplyPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
applyHpSwitchCosAddressPriority(1),
|
|
applyHpSwitchCosAddressDSCPPolicy(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object determines which configuration policy,
|
|
hpSwitchCosAddressPriority or hpSwitchCosDSCPPolicy,
|
|
applies for the given Address CoS entry. These
|
|
configuration policies are mutually exclusive of
|
|
one another."
|
|
DEFVAL { applyHpSwitchCosAddressPriority }
|
|
::= { hpSwitchCosAddressConfigEntry 8 }
|
|
|
|
|
|
hpSwitchCosTosConfig OBJECT IDENTIFIER ::= { hpSwitchCosConfig 5 }
|
|
|
|
hpSwitchCosTosConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
ipprecedence(2),
|
|
diffserv(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of Type of Service based
|
|
Class of Service."
|
|
::= { hpSwitchCosTosConfig 1 }
|
|
|
|
hpSwitchCosTosConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchCosTosConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the CoS Type
|
|
of Service configurations on this switch. This table
|
|
is used only when the hpSwitchCosTosConfigMode is set
|
|
to diffserv."
|
|
::= { hpSwitchCosTosConfig 2 }
|
|
|
|
hpSwitchCosTosConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchCosTosConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The information associated with each CoS TOS
|
|
configuration."
|
|
INDEX { hpSwitchCosTosIndex }
|
|
::= { hpSwitchCosTosConfigTable 1 }
|
|
|
|
HpSwitchCosTosConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchCosTosIndex INTEGER,
|
|
hpSwitchCosTosPriority INTEGER,
|
|
hpSwitchCosTosDSCPPolicy INTEGER,
|
|
hpSwitchCosTosResolvedPriority INTEGER,
|
|
hpSwitchCosTosApplyPolicy INTEGER
|
|
}
|
|
|
|
hpSwitchCosTosIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Packets with this value in the upper bits of the Type
|
|
of Service field of the IP protocol header will receive
|
|
the new priority value. For Differentiated Services
|
|
the upper 6 bits of the TOS field are used."
|
|
::= { hpSwitchCosTosConfigEntry 1 }
|
|
|
|
hpSwitchCosTosPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "The 802.1p priority value to assign to packets
|
|
received for the specified TOS. This value will be
|
|
inserted in the 802.1Q tag and the packet will be
|
|
placed in the appropriate outbound port queue. The
|
|
value of 255 is used to indicate No Override."
|
|
::= { hpSwitchCosTosConfigEntry 2 }
|
|
|
|
hpSwitchCosTosDSCPPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The DSCP Policy to assign to packets received for
|
|
the specified ToS codepoint. This is an index
|
|
into the hpSwitchCosDSCPPolicy table, or the value
|
|
255 indicating no DSCP Policy exists. The DSCP
|
|
policy is associated with an 802.1p priority value,
|
|
which will be inserted in the 802.1Q tag and will
|
|
cause the packet to be placed in the appropriate
|
|
outbound port queue. The DSCP policy value (a
|
|
Differentiated Services codepoint) will also
|
|
replace the incoming value of the Differentiated
|
|
Services field of the IP Type-of-Service byte."
|
|
::= { hpSwitchCosTosConfigEntry 3 }
|
|
|
|
hpSwitchCosTosResolvedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7 | 255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority that will be applied to
|
|
packets received for the specified ToS. This
|
|
value represents the actual operating value for
|
|
this given ToS entry. A value of 255 represents no
|
|
override of the incoming priority. If
|
|
hpSwitchCosTosApplyPolicy is set to
|
|
applyInheritedPriority, the parallel codepoint in
|
|
the hpSwitchCosDSCPPolicyConfigTable is used to
|
|
determine the operating priority. Otherwise if set
|
|
to applyHpSwitchCosTosDSCPPolicy, the priority for
|
|
the codepoint that the hpSwitchCosTosDSCPPolicy is
|
|
indexing will be used."
|
|
::= { hpSwitchCosTosConfigEntry 4 }
|
|
|
|
hpSwitchCosTosApplyPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
applyInheritedPriority(1),
|
|
applyHpSwitchCosTosDSCPPolicy(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object determines which configuration policy,
|
|
applyInheritedPriority or hpSwitchCosTosDSCPPolicy,
|
|
applies for the given Tos CoS entry."
|
|
DEFVAL { applyInheritedPriority }
|
|
::= { hpSwitchCosTosConfigEntry 5 }
|
|
|
|
|
|
hpSwitchCosDSCPPolicyConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchCosDSCPPolicyConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the
|
|
priority applied to each of the Differentiated
|
|
Services Code Points."
|
|
::= { hpSwitchCosConfig 6 }
|
|
|
|
hpSwitchCosDSCPPolicyConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchCosDSCPPolicyConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A list of objects describing a DiffServe Codepoint
|
|
(DSCP), and the 802.1p priority to apply for that
|
|
DSCP."
|
|
INDEX { hpSwitchCosDSCPPolicyIndex }
|
|
::= { hpSwitchCosDSCPPolicyConfigTable 1 }
|
|
|
|
HpSwitchCosDSCPPolicyConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchCosDSCPPolicyIndex INTEGER,
|
|
hpSwitchCosDSCPPolicyPriority INTEGER,
|
|
hpSwitchCosDSCPPolicyName OCTET STRING
|
|
}
|
|
|
|
hpSwitchCosDSCPPolicyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An index to uniquely identify each row in the
|
|
hpSwitchCosDSCPPolicyConfigTable."
|
|
::= { hpSwitchCosDSCPPolicyConfigEntry 1 }
|
|
|
|
hpSwitchCosDSCPPolicyPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7 | 255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority value to assign to packets
|
|
with a given DSCP. This value will be inserted in
|
|
the 802.1Q tag and the packet will be placed in the
|
|
appropriate outbound port queue. The value of 255
|
|
is used to indicate no override of the incoming
|
|
priority."
|
|
::= { hpSwitchCosDSCPPolicyConfigEntry 2 }
|
|
|
|
hpSwitchCosDSCPPolicyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "A user settable name describing a DSCP policy
|
|
table entry."
|
|
::= { hpSwitchCosDSCPPolicyConfigEntry 3 }
|
|
|
|
|
|
hpSwitchCosAppTypeConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchCosAppTypeConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the CoS
|
|
Application type configurations on the switch. An
|
|
application is determined by its network source
|
|
and/or destination port number."
|
|
::= { hpSwitchCosConfig 7 }
|
|
|
|
hpSwitchCosAppTypeConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchCosAppTypeConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the switch
|
|
hpSwitchCosAppTypeConfigEntry Table."
|
|
INDEX { hpSwitchCosAppTypeConfigIndex }
|
|
::= { hpSwitchCosAppTypeConfigTable 1 }
|
|
|
|
HpSwitchCosAppTypeConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchCosAppTypeConfigIndex INTEGER,
|
|
hpSwitchCosAppTypeConfigType INTEGER,
|
|
hpSwitchCosAppTypeSrcPort INTEGER,
|
|
hpSwitchCosAppTypeDestPort INTEGER,
|
|
hpSwitchCosAppTypePriority INTEGER,
|
|
hpSwitchCosAppTypeDSCPPolicy INTEGER,
|
|
hpSwitchCosAppTypeResolvedPriority INTEGER,
|
|
hpSwitchCosAppTypeApplyPolicy INTEGER,
|
|
hpSwitchCosAppTypeStatus RowStatus,
|
|
hpSwitchCosAppTypeMaxSrcPort INTEGER,
|
|
hpSwitchCosAppTypeMaxDestPort INTEGER
|
|
}
|
|
|
|
hpSwitchCosAppTypeConfigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An index to uniquely identify this
|
|
hpSwitchCosAppType row."
|
|
::= { hpSwitchCosAppTypeConfigEntry 1 }
|
|
|
|
hpSwitchCosAppTypeConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
udpSrcPortConfig(1),
|
|
udpDestPortConfig(2),
|
|
udpBothPortsConfig(3),
|
|
tcpSrcPortConfig(4),
|
|
tcpDestPortConfig(5),
|
|
tcpBothPortsConfig(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This signifies which network port number to apply
|
|
to the given CoS Application policy."
|
|
::= { hpSwitchCosAppTypeConfigEntry 2 }
|
|
|
|
hpSwitchCosAppTypeSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object represents the source network port
|
|
that this policy applies to."
|
|
::= { hpSwitchCosAppTypeConfigEntry 3 }
|
|
|
|
hpSwitchCosAppTypeDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object represents the destination network
|
|
port that this policy applies to."
|
|
::= { hpSwitchCosAppTypeConfigEntry 4 }
|
|
|
|
hpSwitchCosAppTypePriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7 | 255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority that should be applied to
|
|
packets containing the particular configured source
|
|
and/or destination port number in this entry. A
|
|
value of 255 represents that no priority override
|
|
should take place."
|
|
::= { hpSwitchCosAppTypeConfigEntry 5 }
|
|
|
|
hpSwitchCosAppTypeDSCPPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The DSCP Policy to assign to packets received for
|
|
the specified application. This is an index into
|
|
the hpSwitchCosDSCPPolicy table, or the value 255
|
|
indicating no DSCP Policy exists. This policy is
|
|
associated with an 802.1p priority value, which
|
|
will be inserted in the 802.1Q tag and will cause
|
|
the packet to be placed in the appropriate outbound
|
|
port queue. The DSCP policy value (a
|
|
Differentiated Services codepoint) will also be
|
|
written into the Differentiated-Services field of
|
|
the IP Type-of-Service byte. The value of 255 is
|
|
used to indicate No Override."
|
|
::= { hpSwitchCosAppTypeConfigEntry 6 }
|
|
|
|
hpSwitchCosAppTypeResolvedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7 | 255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The 802.1p priority that will be applied to
|
|
packets received on the specified application.
|
|
This value represents the actual operating value
|
|
for this CoS application entry. A value of 255
|
|
represents no override of the incoming priority"
|
|
::= { hpSwitchCosAppTypeConfigEntry 7 }
|
|
|
|
hpSwitchCosAppTypeApplyPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
applyHpSwitchCosAppTypePriority(1),
|
|
applyHpSwitchCosAppTypeDSCPPolicy(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object determines which configuration policy,
|
|
hpSwitchCosAppTypePriority or
|
|
hpSwitchCosAppTypeDSCPPolicy, applies for the given
|
|
AppType CoS entry. These configuration policies
|
|
are mutually exclusive of one another."
|
|
DEFVAL { applyHpSwitchCosAppTypePriority }
|
|
::= { hpSwitchCosAppTypeConfigEntry 8 }
|
|
|
|
hpSwitchCosAppTypeStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object is used to create and delete in the
|
|
hpSwitchCosAppType table."
|
|
::= { hpSwitchCosAppTypeConfigEntry 9 }
|
|
|
|
hpSwitchCosAppTypeMaxSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object represents the maximum source network
|
|
port that this policy applies to. If a single,
|
|
specific port is being used and not a range, then
|
|
value of this object is zero."
|
|
::= { hpSwitchCosAppTypeConfigEntry 10 }
|
|
|
|
hpSwitchCosAppTypeMaxDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object represents the maximum destination
|
|
network port that this policy applies to. If a
|
|
single, specific port is being used and not a range,
|
|
then value of this object is zero."
|
|
::= { hpSwitchCosAppTypeConfigEntry 11 }
|
|
|
|
|
|
hpSwitchCosLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The value of the agent's sysUptime when the last
|
|
time this device experienced a change in the
|
|
Class of Service configuration."
|
|
::= { hpSwitchCosConfig 8 }
|
|
|
|
hpSwitchConfigCosLastConfigError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aclQosNoError(1),
|
|
aclQosTooManyRulesError(2),
|
|
aclQosTooManyMasksError(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of the last QoS
|
|
configuration result or error.
|
|
This object is updated for each
|
|
new QoS configuration. It is
|
|
reset upon reboot."
|
|
::= { hpSwitchCosConfig 9 }
|
|
|
|
hpSwitchMeshConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 18 }
|
|
|
|
hpSwitchMeshMulticastAgingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aging(1),
|
|
nonaging(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "With meshing active, a value of aging will cause
|
|
learned multicast addresses to be aged out within
|
|
the required address aging interval. A setting of
|
|
nonaging will prevent learned multicast addresses
|
|
from being removed from the switch. Multicast addresses
|
|
learned while in nonaging mode are not removed until
|
|
the switch is rebooted."
|
|
::= { hpSwitchMeshConfig 1 }
|
|
|
|
hpSwitchMeshBackwardCompatibility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Due to some hardware differences, the Series
|
|
1600/24xx/4000/8000 switches cannot be used
|
|
directly in a mesh environment with Series 5300XL
|
|
switches. Series 5300XL switches need to emulate
|
|
the operation of Series 1600/24xx/4000/8000
|
|
switches in order to have a heterogeneous mesh
|
|
working properly. Meshing backward-compatibility
|
|
feature allows Series 5300XL switches to operate in
|
|
a compatible mode in which the operation of Series
|
|
1600/24xx/4000/8000 switches are emulated. When
|
|
backward-compatibility is enabled, meshing software
|
|
will establish connections with Series
|
|
1600/24xx/4000/8000 switches and emulate their
|
|
operation. When backward-compatibility disabled,
|
|
Series 1600/24xx/4000/8000 switches in the mesh
|
|
will be ignored by the Series 5300XL switches."
|
|
::= { hpSwitchMeshConfig 2 }
|
|
|
|
|
|
hpSwitchPortIsolationConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 19 }
|
|
|
|
hpSwitchPortIsolationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This enables the port isolation feature on the device.
|
|
Note: Enabling this feature may require VLANS to be
|
|
configured properly."
|
|
::= { hpSwitchPortIsolationConfig 1 }
|
|
|
|
hpSwitchPortIsolationConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchPortIsolationConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the CoS
|
|
Application type configurations on the switch. An
|
|
application is determined by its network source
|
|
and/or destination port number."
|
|
::= { hpSwitchPortIsolationConfig 2 }
|
|
|
|
hpSwitchPortIsolationConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchPortIsolationConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the switch
|
|
hpSwitchPortIsolationConfigEntry Table."
|
|
INDEX { hpSwitchPortIsolationPort }
|
|
::= { hpSwitchPortIsolationConfigTable 1 }
|
|
|
|
HpSwitchPortIsolationConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchPortIsolationPort INTEGER,
|
|
hpSwitchPortIsolationPortMode INTEGER
|
|
}
|
|
|
|
hpSwitchPortIsolationPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the IfIndex table representing a logical port
|
|
on this switch."
|
|
::= { hpSwitchPortIsolationConfigEntry 1 }
|
|
|
|
hpSwitchPortIsolationPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
uplink(1),
|
|
public(2),
|
|
private(3),
|
|
local(4),
|
|
group1(5),
|
|
group2(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Defines the operational mode of a port when Port
|
|
Isolation feature is enabled."
|
|
::= { hpSwitchPortIsolationConfigEntry 2 }
|
|
|
|
hpSwitchSshConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 20 }
|
|
|
|
hpSwitchSshAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the SSH operation."
|
|
::= { hpSwitchSshConfig 1 }
|
|
|
|
hpSwitchSshVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
version1(1),
|
|
version2(2),
|
|
version1or2(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The version of the SSH protocol to run.
|
|
'version1' will accept connections from
|
|
v1.3 or v1.5 clients. 'version2' will accept
|
|
connections only from v2.0 clients.
|
|
The default is 'version1_or_2' which will accept any
|
|
connection which can be successfully negotiated."
|
|
DEFVAL { 1 }
|
|
::= { hpSwitchSshConfig 2 }
|
|
|
|
hpSwitchSshTimeout OBJECT-TYPE
|
|
SYNTAX Timeout (5..120)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum length of time (in seconds) between the wakeup
|
|
of SSH task and successful protocol negotiation and
|
|
authentication. The default is 120 seconds."
|
|
DEFVAL { 120 }
|
|
::= { hpSwitchSshConfig 3 }
|
|
|
|
hpSwitchSshPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The port number on which SSH daemon should listen for
|
|
connection requests."
|
|
DEFVAL { 22 }
|
|
::= { hpSwitchSshConfig 4 }
|
|
|
|
hpSwitchSshServerKeySize OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bits512(1),
|
|
bits768(2),
|
|
bits1024(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the key size (in bits) of version 1 SSH host
|
|
rsa key"
|
|
::= { hpSwitchSshConfig 5 }
|
|
|
|
hpSwitchSshFileServerAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether or not the SSH daemon will accept
|
|
and process file transfer requests."
|
|
::= { hpSwitchSshConfig 6 }
|
|
|
|
hpSwitchSshIpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4(1),
|
|
ipv6(2),
|
|
ipv4or6(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The types of IP connections SSH will support.
|
|
'ipv4' will accept connections from
|
|
Ipv4 clients. 'ipv6' will accept
|
|
connections only from ipv6 clients.
|
|
The default is 'ipv4or6' which will accept
|
|
Connections from both ipv4 and ipv6 clients."
|
|
DEFVAL { 3 }
|
|
::= { hpSwitchSshConfig 7 }
|
|
|
|
hpSwitchPendingConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 21 }
|
|
|
|
hpSwitchPendingConfigControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
applyMstp(1),
|
|
resetMstp(2),
|
|
noAction(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The object controls switch pending configuration.
|
|
If set to the 'applyMstp' value the object applies
|
|
pending Multiple Spanning Tree Protocol (MSTP)
|
|
configuration. The 'resetMstp' value, if set, triggers
|
|
copying of the active MSTP configuration to the
|
|
pending one. Before the pending configuration is applied
|
|
its consistency is verified and the request fails if
|
|
errors are detected.
|
|
The value the object returns is undefined."
|
|
::= { hpSwitchPendingConfig 1 }
|
|
|
|
hpSwitchBWMinConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 22 }
|
|
|
|
hpSwitchBWMinEgressPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchBWMinEgressPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "New definitions under HP-ICF-RATE-LIMIT-MIB.
|
|
A table that contains information about the port's
|
|
egress Guaranteed Minimum Bandwidth configurations
|
|
on this switch."
|
|
::= { hpSwitchBWMinConfig 1 }
|
|
|
|
hpSwitchBWMinEgressPortConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchBWMinEgressPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "New definitions under HP-ICF-RATE-LIMIT-MIB.
|
|
The information associated with each port's egress
|
|
Guaranteed Minimum Bandwidth configuration."
|
|
INDEX { hpSwitchBWMinEgressPortIndex }
|
|
::= { hpSwitchBWMinEgressPortConfigTable 1 }
|
|
|
|
HpSwitchBWMinEgressPortConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchBWMinEgressPortIndex INTEGER,
|
|
hpSwitchBWMinEgressPortPrctLowPriority INTEGER,
|
|
hpSwitchBWMinEgressPortPrctNormalPriority INTEGER,
|
|
hpSwitchBWMinEgressPortPrctMedPriority INTEGER,
|
|
hpSwitchBWMinEgressPortPrctHighPriority INTEGER
|
|
}
|
|
|
|
hpSwitchBWMinEgressPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "New definitions under HP-ICF-RATE-LIMIT-MIB.
|
|
The ifIndex value which uniquely identifies a row
|
|
in the Interfaces Table."
|
|
::= { hpSwitchBWMinEgressPortConfigEntry 1 }
|
|
|
|
hpSwitchBWMinEgressPortPrctLowPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "New definitions under HP-ICF-RATE-LIMIT-MIB.
|
|
The percentage of Guaranteed Minimum bandwidth to
|
|
be assigned to the egress Low-Priority queue for
|
|
this port. Total values for all four queues must not
|
|
exceed 100 percent."
|
|
::= { hpSwitchBWMinEgressPortConfigEntry 2 }
|
|
|
|
hpSwitchBWMinEgressPortPrctNormalPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "New definitions under HP-ICF-RATE-LIMIT-MIB.
|
|
The percentage of Guaranteed Minimum bandwidth to
|
|
be assigned to the egress Normal-Priority queue for
|
|
this port. Total values for all four queues must not
|
|
exceed 100 percent."
|
|
::= { hpSwitchBWMinEgressPortConfigEntry 3 }
|
|
|
|
hpSwitchBWMinEgressPortPrctMedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "New definitions under HP-ICF-RATE-LIMIT-MIB.
|
|
The percentage of Guaranteed Minimum bandwidth to
|
|
be assigned to the egress Medium-Priority queue for
|
|
this port. Total values for all four queues must not
|
|
exceed 100 percent."
|
|
::= { hpSwitchBWMinEgressPortConfigEntry 4 }
|
|
|
|
hpSwitchBWMinEgressPortPrctHighPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "New definitions under HP-ICF-RATE-LIMIT-MIB.
|
|
The percentage of Guaranteed Minimum bandwidth to
|
|
be assigned to the egress High-Priority queue for
|
|
this port. Total values for all four queues must not
|
|
exceed 100 percent."
|
|
::= { hpSwitchBWMinEgressPortConfigEntry 5 }
|
|
|
|
hpSwitchRateLimitPortConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 23 }
|
|
|
|
hpSwitchRateLimitPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpSwitchRateLimitPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table that contains information about the port
|
|
Rate-Limiting configurations on this switch."
|
|
::= { hpSwitchRateLimitPortConfig 1 }
|
|
|
|
hpSwitchRateLimitPortConfigEntry OBJECT-TYPE
|
|
SYNTAX HpSwitchRateLimitPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The information associated with each port's
|
|
Rate-Limiting configuration."
|
|
INDEX { hpSwitchRateLimitPortIndex }
|
|
::= { hpSwitchRateLimitPortConfigTable 1 }
|
|
|
|
HpSwitchRateLimitPortConfigEntry ::=
|
|
SEQUENCE {
|
|
hpSwitchRateLimitPortIndex INTEGER,
|
|
hpSwitchRateLimitPortControlMode INTEGER,
|
|
hpSwitchRateLimitPortSingleControlPrct INTEGER,
|
|
hpSwitchRateLimitPortPrctLowPriority INTEGER,
|
|
hpSwitchRateLimitPortPrctNormalPriority INTEGER,
|
|
hpSwitchRateLimitPortPrctMedPriority INTEGER,
|
|
hpSwitchRateLimitPortPrctHighPriority INTEGER
|
|
}
|
|
|
|
hpSwitchRateLimitPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The ifIndex value which uniquely identifies a row
|
|
in the Interfaces Table."
|
|
::= { hpSwitchRateLimitPortConfigEntry 1 }
|
|
|
|
hpSwitchRateLimitPortControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
rateLimitPerPortOnly(2),
|
|
rateLimitPerQueue(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The mode by which this port will be Rate-Limited
|
|
on ingress. If rateLimitPerPortOnly is configured,
|
|
there will be a single maximum rate for the entire
|
|
port. If rateLimitPerQueue is configured, the values
|
|
for each of the four queues indicate the maximum
|
|
percentage of port traffic that may be received by
|
|
that queue (the sum of these values must not exceed
|
|
100). When rate-limiting is disabled, there are no
|
|
maximum controls on ingress for this port."
|
|
::= { hpSwitchRateLimitPortConfigEntry 2 }
|
|
|
|
hpSwitchRateLimitPortSingleControlPrct OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "When hpSwitchRateLimitPortControlMode is configured
|
|
for rateLimitPerPortOnly, this value is the maximum
|
|
percentage of traffic that may be received by this
|
|
port on ingress."
|
|
::= { hpSwitchRateLimitPortConfigEntry 3 }
|
|
|
|
hpSwitchRateLimitPortPrctLowPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum percentage of traffic that may be
|
|
received by this port's Low-Priority queue on ingress.
|
|
hpSwitchRateLimitPortControlMode must be configured to
|
|
use rateLimitPerQueue for this to take effect. A value
|
|
of 0-percent for any queue means that no traffic will
|
|
ever be received on this port for that ingress queue.
|
|
Total values for all four queues must not exceed 100
|
|
percent."
|
|
::= { hpSwitchRateLimitPortConfigEntry 4 }
|
|
|
|
hpSwitchRateLimitPortPrctNormalPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum percentage of traffic that may be
|
|
received by this port's Normal-Priority queue on
|
|
ingress. hpSwitchRateLimitPortControlMode must be
|
|
configured to use rateLimitPerQueue for this to take
|
|
effect. A value of 0-percent for any queue means that
|
|
no traffic will ever be received on this port for that
|
|
ingress queue. Total values for all four queues must
|
|
not exceed 100 percent."
|
|
::= { hpSwitchRateLimitPortConfigEntry 5 }
|
|
|
|
hpSwitchRateLimitPortPrctMedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum percentage of traffic that may be
|
|
received by this port's Medium-Priority queue on
|
|
ingress. hpSwitchRateLimitPortControlMode must be
|
|
configured to use rateLimitPerQueue for this to take
|
|
effect. A value of 0-percent for any queue means that
|
|
no traffic will ever be received on this port for that
|
|
ingress queue. Total values for all four queues must
|
|
not exceed 100 percent."
|
|
::= { hpSwitchRateLimitPortConfigEntry 6 }
|
|
|
|
hpSwitchRateLimitPortPrctHighPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum percentage of traffic that may be
|
|
received by this port's High-Priority queue on
|
|
ingress. hpSwitchRateLimitPortControlMode must be
|
|
configured to use rateLimitPerQueue for this to take
|
|
effect. A value of 0-percent for any queue means that
|
|
no traffic will ever be received on this port for that
|
|
ingress queue. Total values for all four queues must
|
|
not exceed 100 percent."
|
|
::= { hpSwitchRateLimitPortConfigEntry 7 }
|
|
|
|
hpSwitchQosPassThroughMode OBJECT IDENTIFIER ::= { hpSwitchConfig 24 }
|
|
|
|
hpSwitchQosPassThroughModeConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
optimized (1),
|
|
typical (2),
|
|
balanced (3),
|
|
onequeue (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specify the queue configuration mode for the switch.
|
|
While changing the queue configuration mode this feature
|
|
momentarily require to bring down the logical port and
|
|
after the initialisation of the queues the ports are
|
|
brought up."
|
|
|
|
::= { hpSwitchQosPassThroughMode 1 }
|
|
|
|
hpSwitchReboot OBJECT IDENTIFIER ::= { hpSwitchConfig 25 }
|
|
|
|
hpSwitchRebootConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
yes (1),
|
|
no (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This tells the status of the switch whether it requires
|
|
reboot for some variable to get effective.
|
|
The value of this variable can be
|
|
|
|
yes (1) reboot is required.
|
|
no (2) reboot is not required."
|
|
::= { hpSwitchReboot 1 }
|
|
|
|
hpSwitchRebootFastBoot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether fastboot is enabled or not on
|
|
the switch."
|
|
DEFVAL { disable }
|
|
|
|
::= { hpSwitchReboot 2 }
|
|
|
|
|
|
hpSwitchProtectedPortsConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 26 }
|
|
|
|
hpSwitchProtectedPortsMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This variable specifies a group of ports that are not
|
|
allowed to communicate to each-other. Each octet within
|
|
the value of this object specifies a set of eight ports,
|
|
with the first octet specifying ports 1 through 8, the
|
|
second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the switch is represented by a single bit within
|
|
the value of this object."
|
|
::= { hpSwitchProtectedPortsConfig 1 }
|
|
|
|
|
|
-- **********************************************************
|
|
-- Trap Definitions
|
|
-- **********************************************************
|
|
|
|
hpSwitchTraps OBJECT IDENTIFIER ::= { hpSwitchConfig 0 }
|
|
|
|
hpSwitchTrapsObjects
|
|
OBJECT IDENTIFIER ::= { hpSwitchTraps 1 }
|
|
|
|
hpSwitchStpErrantBpduDetector OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bpduFilter (1),
|
|
bpduProtection (2),
|
|
pvstFilter (3),
|
|
pvstProtection (4)
|
|
}
|
|
ACCESS accessible-for-notify
|
|
STATUS optional
|
|
DESCRIPTION "The identifier of the feature generating Errant
|
|
BPDU trap."
|
|
::= { hpSwitchTrapsObjects 1 }
|
|
|
|
hpSwitchStpErrantBpduSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS accessible-for-notify
|
|
STATUS optional
|
|
DESCRIPTION "The source MAC address of the port sending Errant
|
|
STP BPDU."
|
|
::= { hpSwitchTrapsObjects 2 }
|
|
|
|
hpSwitchStpErrantBpduReceived TRAP-TYPE
|
|
ENTERPRISE hpSwitchTraps
|
|
VARIABLES { hpSwitchStpPort,
|
|
hpSwitchStpPortErrantBpduCounter,
|
|
dot1dStpPortState,
|
|
dot1dStpPortDesignatedBridge,
|
|
dot1dStpPortDesignatedPort,
|
|
hpSwitchStpErrantBpduSrcMac,
|
|
hpSwitchStpErrantBpduDetector }
|
|
DESCRIPTION "This trap indicates that unexpected (errant) STP BPDU
|
|
has been received on a port (e.g. on a port that is
|
|
connected to non-STP device). This notification trap
|
|
is controlled by the state of 'hpSwitchStpTrapCntl'
|
|
object. Implementation of this trap is optional."
|
|
::= 1
|
|
END
|