Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
506 lines
21 KiB
Text
506 lines
21 KiB
Text
ERRP-MIB DEFINITIONS ::= BEGIN
|
||
IMPORTS
|
||
MODULE-IDENTITY, OBJECT-TYPE,
|
||
Counter32, Unsigned32, TimeTicks
|
||
FROM SNMPv2-SMI
|
||
RowStatus, TruthValue, DisplayString,
|
||
TEXTUAL-CONVENTION, MacAddress
|
||
FROM SNMPv2-TC
|
||
gbnL2
|
||
FROM ADMIN-MASTER-MIB
|
||
MODULE-COMPLIANCE, OBJECT-GROUP
|
||
FROM SNMPv2-CONF;
|
||
|
||
errpMib MODULE-IDENTITY
|
||
LAST-UPDATED "201012140000Z"
|
||
ORGANIZATION "NEW ADMIN MIB Working Group"
|
||
CONTACT-INFO
|
||
"Email: support@admin.com"
|
||
DESCRIPTION
|
||
" The errp MIB is targeted at easing errp configuration via snmp tools."
|
||
REVISION "1012140000Z"
|
||
DESCRIPTION
|
||
"Draft 1"
|
||
::= {gbnL2 7 }
|
||
|
||
errpMIBObjects OBJECT IDENTIFIER ::= { errpMib 1 }
|
||
errp OBJECT IDENTIFIER ::= { errpMIBObjects 1 }
|
||
|
||
errpOnoff OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
enable(1),
|
||
disable(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Enable/disable errp function for this bridge."
|
||
--errp使能开关
|
||
::= { errp 1 }
|
||
|
||
errpHealthTime OBJECT-TYPE
|
||
SYNTAX Integer32(1..10)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The hello timer is used by master or edge node for ring health detection.
|
||
The correct operational formula: FailedTimer >= 3 * HelloTimer "
|
||
--主节点和边界节点使用此定时器对环路的完整性进行周期性检测
|
||
::= { errp 2 }
|
||
|
||
errpHealthTimeout OBJECT-TYPE
|
||
SYNTAX Integer32(3..30)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The timeout value used by master during ring health detection.
|
||
The correct operational formula: FailedTimer >= 3 * HelloTimer"
|
||
--主节点检测环路完整性使用的超时定时器值，该值必须大于等于HelloTimer的3倍。
|
||
::= { errp 3 }
|
||
|
||
errpMajorFaultTime OBJECT-TYPE
|
||
SYNTAX Integer32(2..29)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The timeout value used by assitant edge during ring health detection."
|
||
--辅助边缘节点检测环路完整性使用的超时定时器值
|
||
::= { errp 4 }
|
||
|
||
errpPrefwdTimeout OBJECT-TYPE
|
||
SYNTAX Integer32(3..30)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The block timeout value used by node when portup event occurs."
|
||
--端口UP时节点使用的端口阻塞超时定时器
|
||
::= { errp 5 }
|
||
|
||
errpDomainTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ErrpDomainEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A table that contains domain-specific information."
|
||
--由errp域表项构成的表
|
||
::= { errp 6 }
|
||
|
||
errpDomainEntry OBJECT-TYPE
|
||
SYNTAX ErrpDomainEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of information maintained by every domain."
|
||
--基于每个域的表项
|
||
INDEX { errpDomainId }
|
||
::= { errpDomainTable 1 }
|
||
|
||
ErrpDomainEntry ::=
|
||
SEQUENCE {
|
||
errpDomainId Integer32,
|
||
errpMVlanId Integer32,
|
||
errpWorkMode INTEGER,
|
||
errpDomainRowStatus RowStatus
|
||
}
|
||
|
||
errpDomainId OBJECT-TYPE
|
||
SYNTAX Integer32(0..15)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The domain ID is used when network is managed in unit of domain, one
|
||
domain should be a set of contiguous bridges."
|
||
--域ID在网络分域管理时使用，一个域就是一个毗邻的网桥集合
|
||
::= { errpDomainEntry 1 }
|
||
|
||
errpMVlanId OBJECT-TYPE
|
||
SYNTAX Integer32 (1..4093)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The manage VLAN ID of the domain, can not be an existing vlan."
|
||
--域的管理VLAN ID, 每个域具有两个控制VLAN，分别叫做主控制VLAN和子控制VLAN。
|
||
--主环的协议报文在主控制VLAN中传播，子环的协议报文在子控制VLAN中传播。
|
||
--配置时只需要指定主控制VLAN，而把比主控制VLAN ID值大1的VLAN作为子控制VLAN。
|
||
--主控制VLAN和子控制VLAN都不能指定为已经存在的VLAN，MAC地址学习模式必须配置为IVL。
|
||
::= { errpDomainEntry 2 }
|
||
|
||
errpWorkMode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
standard(1),
|
||
huaWei(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The work mode of the domain. If standard(1) is set, then the domain works on RFC3619
|
||
standard. If huaWei(2) is set, then the domain works on RRPP standard, and is able
|
||
to work together with the Huawei equipment."
|
||
--域的工作模式
|
||
::= { errpDomainEntry 3 }
|
||
|
||
errpDomainRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus {
|
||
active(1),
|
||
createAndGo(4),
|
||
destroy(6)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object is used to create or delete a domain."
|
||
::= { errpDomainEntry 4 }
|
||
|
||
errpRingTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ErrpRingEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A table that contains domain-and-ring-specific information."
|
||
--由errp环表项构成的表
|
||
::= { errp 7 }
|
||
|
||
errpRingEntry OBJECT-TYPE
|
||
SYNTAX ErrpRingEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of information maintained by every ring."
|
||
--基于每个环的表项
|
||
INDEX { errpDomainId, errpRingId }
|
||
::= { errpRingTable 1 }
|
||
|
||
ErrpRingEntry ::=
|
||
SEQUENCE {
|
||
errpRingId Integer32,
|
||
errpRingLevel Integer32,
|
||
errpBrdgRole INTEGER,
|
||
errpPriComPortId Integer32,
|
||
errpSecEdgePortId Integer32,
|
||
errpRingRowStatus RowStatus,
|
||
errpNodeState INTEGER,
|
||
errpPriComPortState INTEGER,
|
||
errpSecEdgePortState INTEGER,
|
||
errpQuerySolicit INTEGER
|
||
}
|
||
|
||
errpRingId OBJECT-TYPE
|
||
SYNTAX Integer32 (0..15)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The identifier of ethernet ring which reside in a domain."
|
||
--域内以太环的ID
|
||
::= { errpRingEntry 1 }
|
||
|
||
errpRingLevel OBJECT-TYPE
|
||
SYNTAX Integer32 (0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The ring level,0 means master ring, while 1 means sub ring."
|
||
--环的级别,0为主环,1为子环
|
||
::= { errpRingEntry 2 }
|
||
|
||
errpBrdgRole OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
master(1),
|
||
trans(2),
|
||
edge(3),
|
||
assEdge(4)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The bridge role in ethernet ring."
|
||
--网桥在环中的角色
|
||
::= { errpRingEntry 3 }
|
||
|
||
errpPriComPortId OBJECT-TYPE
|
||
SYNTAX Integer32 (1..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The primary port id when bridge is master or transmit,the common port id otherwise."
|
||
--网桥为主节点或者传输节点时此值代表主端口,否则代表公共端口
|
||
::= { errpRingEntry 4 }
|
||
|
||
errpSecEdgePortId OBJECT-TYPE
|
||
SYNTAX Integer32 (1..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The secondary port id when bridge is master or transmit,the edge port id otherwise."
|
||
--网桥为主节点或者传输节点时此值代表副端口,否则代表边界端口
|
||
::= { errpRingEntry 5 }
|
||
|
||
errpRingRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus {
|
||
active(1),
|
||
notInService(2),
|
||
notReady(3),
|
||
createAndGo(4),
|
||
createAndWait(5),
|
||
destroy(6)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object indicates the status of this ring."
|
||
--指示当前环的活动状态
|
||
::= { errpRingEntry 6 }
|
||
|
||
errpNodeState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
begin(0),
|
||
health(1),
|
||
fault(2),
|
||
linkUp(3),
|
||
linkDown(4),
|
||
preforwarding(5)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The node state in the ring. begin(0) means node is inactive or inital state.
|
||
health(1) means master node detects the ring in a health state.
|
||
fault(2) means master node detects the ring in a fault state.
|
||
linkUp(3) means both ring ports of the transmit node are link up and in the forwarding state.
|
||
linkDown(4) means at least one ring port of the transmit node is link down.
|
||
preforwarding(5) means at least one ring port of the transmit node is just link up and in the blocking state.
|
||
Edge node and assistant edge node are same as transmit node, but only concern about the edge port state."
|
||
::= { errpRingEntry 7 }
|
||
|
||
errpPriComPortState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(0),
|
||
forwarding(1),
|
||
blocking(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The primary port or common port state in the ring. disabled(0) means port is link down.
|
||
forwarding(1) means port is in the forwarding state.
|
||
blocking(2) means port is in the blocking or discarding state."
|
||
::= { errpRingEntry 8 }
|
||
|
||
errpSecEdgePortState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(0),
|
||
forwarding(1),
|
||
blocking(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The secondary port or edge port state in the ring. disabled(0) means port is link down.
|
||
forwarding(1) means port is in the forwarding state.
|
||
blocking(2) means port is in the blocking or discarding state."
|
||
::= { errpRingEntry 9 }
|
||
|
||
errpQuerySolicit OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
enable(1),
|
||
disable(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Enable/disable Query Solicit function of the ring."
|
||
::= { errpRingEntry 10 }
|
||
|
||
errpRingStatsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ErrpRingStatsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table contains statistics for the ERRP ring ports."
|
||
::= { errp 8 }
|
||
|
||
errpRingStatsEntry OBJECT-TYPE
|
||
SYNTAX ErrpRingStatsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of statistics maintained by every ring port. The sequence is:
|
||
(domain,ring,priComPort),(domain,ring,secEdgePort),
|
||
(domain,next ring,priComPort),(domain,next ring,secEdgePort),...,
|
||
(next domain,ring,priComPort),(next domain,ring,secEdgePort),
|
||
(next domain,next ring,priComPort),......"
|
||
INDEX { errpDomainId, errpRingId, errpRingPortId }
|
||
::= { errpRingStatsTable 1 }
|
||
|
||
ErrpRingStatsEntry ::=
|
||
SEQUENCE {
|
||
errpRingPortId Integer32,
|
||
errpHealthTx Counter32,
|
||
errpHealthRx Counter32,
|
||
errpCommonFlushTx Counter32,
|
||
errpCommonFlushRx Counter32,
|
||
errpCompleteFlushTx Counter32,
|
||
errpCompleteFlushRx Counter32,
|
||
errpLinkDownTx Counter32,
|
||
errpLinkDownRx Counter32,
|
||
errpLinkUpTx Counter32,
|
||
errpLinkUpRx Counter32,
|
||
errpEdgeHelloTx Counter32,
|
||
errpEdgeHelloRx Counter32,
|
||
errpMajorFaultTx Counter32,
|
||
errpMajorFaultRx Counter32
|
||
}
|
||
|
||
errpRingPortId OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port equals to errpPriComPortId or errpSecEdgePortId of the ring within errpRingTable."
|
||
::= { errpRingStatsEntry 1 }
|
||
|
||
errpHealthTx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Health(or Hello) packets transmitted on this port."
|
||
::= { errpRingStatsEntry 2 }
|
||
|
||
errpHealthRx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Health(or Hello) packets received on this port."
|
||
::= { errpRingStatsEntry 3 }
|
||
|
||
errpCommonFlushTx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Common Flush packets transmitted on this port."
|
||
::= { errpRingStatsEntry 4 }
|
||
|
||
errpCommonFlushRx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Common Flush packets received on this port."
|
||
::= { errpRingStatsEntry 5 }
|
||
|
||
errpCompleteFlushTx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Complete Flush packets transmitted on this port."
|
||
::= { errpRingStatsEntry 6 }
|
||
|
||
errpCompleteFlushRx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Complete Flush packets received on this port."
|
||
::= { errpRingStatsEntry 7 }
|
||
|
||
errpLinkDownTx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Link Down packets transmitted on this port."
|
||
::= { errpRingStatsEntry 8 }
|
||
|
||
errpLinkDownRx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Link Down packets received on this port."
|
||
::= { errpRingStatsEntry 9 }
|
||
|
||
errpLinkUpTx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Link Up packets transmitted on this port."
|
||
::= { errpRingStatsEntry 10 }
|
||
|
||
errpLinkUpRx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Link Up packets received on this port."
|
||
::= { errpRingStatsEntry 11 }
|
||
|
||
errpEdgeHelloTx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Edge Hello packets transmitted on this port."
|
||
::= { errpRingStatsEntry 12 }
|
||
|
||
errpEdgeHelloRx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Edge Hello packets received on this port."
|
||
::= { errpRingStatsEntry 13 }
|
||
|
||
errpMajorFaultTx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Major Fault packets transmitted on this port."
|
||
::= { errpRingStatsEntry 14 }
|
||
|
||
errpMajorFaultRx OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A count of the number of Major Fault packets received on this port."
|
||
::= { errpRingStatsEntry 15 }
|
||
|
||
errpTrap OBJECT IDENTIFIER ::= { errp 9 }
|
||
----------------------------------------------------------------------------------
|
||
--ERRP TRAP MIB--
|
||
----------------------------------------------------------------------------------
|
||
|
||
errpRingNodeStateChange NOTIFICATION-TYPE
|
||
OBJECTS { errpNodeState }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The node state in the ring turns to health or fault.
|
||
health(1) means master node detects the ring in a health state.
|
||
fault(2) means master node detects the ring in a fault state."
|
||
::= { errpTrap 1 }
|
||
|
||
errpPriComPortStateChange NOTIFICATION-TYPE
|
||
OBJECTS { errpPriComPortState }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The primary port or common port state in the ring turns to disabled, forwarding, or blocking.
|
||
disabled(0) means port is link down.
|
||
forwarding(1) means port is in the forwarding state.
|
||
blocking(2) means port is in the blocking or discarding state."
|
||
::= { errpTrap 2 }
|
||
|
||
errpSecEdgePortStateChange NOTIFICATION-TYPE
|
||
OBJECTS { errpSecEdgePortState }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The secondary port or edge port state in the ring turns to disabled, forwarding, or blocking.
|
||
disabled(0) means port is link down.
|
||
forwarding(1) means port is in the forwarding state.
|
||
blocking(2) means port is in the blocking or discarding state."
|
||
::= { errpTrap 3 }
|
||
END
|