Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1385 lines
63 KiB
Text
1385 lines
63 KiB
Text
PDU-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI
|
|
enterprises, Integer32, IpAddress, Opaque FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION, DisplayString, MacAddress FROM SNMPv2-TC;
|
|
|
|
eaton MODULE-IDENTITY
|
|
LAST-UPDATED "200803140000Z" -- March 14, 2008
|
|
ORGANIZATION "Eaton Corporation"
|
|
CONTACT-INFO "
|
|
Author: Eaton Corporation
|
|
postal: Eaton Corporation
|
|
Eaton Center
|
|
1111 Superior Avenue
|
|
Cleveland, OH 44114-2584
|
|
phone: +1 (216) 523-5000
|
|
"
|
|
DESCRIPTION "This mib describes the SNMP functions of the
|
|
Power Distribution Unit by Eaton Corporation."
|
|
REVISION "200803140000z"
|
|
DESCRIPTION "Modified MIB in effort to better support HP Openview
|
|
and other SNMP managers."
|
|
|
|
REVISION "200702140000Z"
|
|
DESCRIPTION "Updated version for remote access to pdu."
|
|
::= { enterprises 534 }
|
|
|
|
product OBJECT IDENTIFIER ::= { eaton 6 }
|
|
pduagent OBJECT IDENTIFIER ::= { product 6 }
|
|
pdu OBJECT IDENTIFIER ::= { pduagent 6 }
|
|
|
|
traps OBJECT IDENTIFIER ::= { pdu 0 }
|
|
board OBJECT IDENTIFIER ::= { pdu 1 }
|
|
environmental OBJECT IDENTIFIER ::= { pdu 2 }
|
|
conformance OBJECT IDENTIFIER ::= { pdu 9 }
|
|
info OBJECT IDENTIFIER ::= { board 1 }
|
|
outlets OBJECT IDENTIFIER ::= { board 2 }
|
|
unit OBJECT IDENTIFIER ::= { board 3 }
|
|
|
|
unitReadings OBJECT IDENTIFIER ::= { unit 1 }
|
|
|
|
compliances OBJECT IDENTIFIER ::= { conformance 1 }
|
|
groups OBJECT IDENTIFIER ::= { conformance 2 }
|
|
|
|
-- Conformance Information
|
|
|
|
compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The requirements for conformance to the PDU-MIB."
|
|
MODULE -- this module
|
|
|
|
GROUP infoGroup
|
|
DESCRIPTION
|
|
"The info group."
|
|
|
|
GROUP outletsGroup
|
|
DESCRIPTION
|
|
"The outlets group."
|
|
|
|
GROUP unitSensorsGroup
|
|
DESCRIPTION
|
|
"The unit sensor readings association group."
|
|
|
|
GROUP externalTemperatureGroup
|
|
DESCRIPTION
|
|
"The external temperature sensor association group."
|
|
|
|
GROUP externalHumidityGroup
|
|
DESCRIPTION
|
|
"The external humidity sensor association group."
|
|
|
|
GROUP trapsGroup
|
|
DESCRIPTION
|
|
"The traps group."
|
|
::= { compliances 1 }
|
|
|
|
infoGroup OBJECT-GROUP
|
|
OBJECTS { firmwareVersion,
|
|
serialNumber,
|
|
ipAddress,
|
|
netmask,
|
|
gateway,
|
|
mac,
|
|
hardwareRev,
|
|
userName,
|
|
objectName,
|
|
objectInstance,
|
|
targetUser,
|
|
groupName,
|
|
imageVersion,
|
|
sensorDescr,
|
|
thresholdDescr,
|
|
thresholdSeverity,
|
|
thresholdEventType,
|
|
status,
|
|
slaveIpAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing basic information
|
|
about the pdu."
|
|
::= { groups 1 }
|
|
|
|
outletsGroup OBJECT-GROUP
|
|
OBJECTS { outletCount,
|
|
outletLabel,
|
|
outletOperationalState,
|
|
outletCurrent,
|
|
outletMaxCurrent,
|
|
outletVoltage,
|
|
outletActivePower,
|
|
outletApparentPower,
|
|
outletPowerFactor,
|
|
outletCurrentUpperWarning,
|
|
outletCurrentUpperCritical }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing basic information
|
|
about the outlets, including sensor readings."
|
|
::= { groups 2 }
|
|
|
|
unitSensorsGroup OBJECT-GROUP
|
|
OBJECTS { unitCurrent,
|
|
unitVoltage,
|
|
unitActivePower,
|
|
unitApparentPower,
|
|
unitCpuTemp,
|
|
unitCircuitBreak0State,
|
|
unitCircuitBreak1State,
|
|
unitCircuitBreak2State,
|
|
unitCircuitBreak0Current,
|
|
unitCircuitBreak1Current,
|
|
unitCircuitBreak2Current,
|
|
unitVoltageLowerWarning,
|
|
unitVoltageUpperWarning,
|
|
unitVoltageLowerCritical,
|
|
unitVoltageUpperCritical,
|
|
unitCurrentUpperWarning,
|
|
unitCurrentUpperCritical,
|
|
unitTempLowerWarning,
|
|
unitTempUpperWarning,
|
|
unitTempLowerCritical,
|
|
unitTempUpperCritical }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing unit level sensor readings."
|
|
::= { groups 4 }
|
|
|
|
externalTemperatureGroup OBJECT-GROUP
|
|
OBJECTS { tempSensorCount,
|
|
tempSensorLabel,
|
|
temperature,
|
|
tempLowerWarning,
|
|
tempUpperWarning,
|
|
tempLowerCritical,
|
|
tempUpperCritical,
|
|
tempLowerWarningReset,
|
|
tempUpperWarningReset,
|
|
tempLowerCriticalReset,
|
|
tempUpperCriticalReset }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing external temperature sensor readings and threshold settings."
|
|
::= { groups 6 }
|
|
|
|
externalHumidityGroup OBJECT-GROUP
|
|
OBJECTS { humiditySensorCount,
|
|
humiditySensorLabel,
|
|
humidity,
|
|
humidityLowerWarning,
|
|
humidityUpperWarning,
|
|
humidityLowerCritical,
|
|
humidityUpperCritical,
|
|
humidityLowerWarningReset,
|
|
humidityUpperWarningReset,
|
|
humidityLowerCriticalReset,
|
|
humidityUpperCriticalReset }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing external humidity sensor readings and threshold settings."
|
|
::= { groups 7 }
|
|
|
|
trapsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { rebootStarted,
|
|
rebootCompleted,
|
|
userLogin,
|
|
userLogout,
|
|
userAuthenticationFailure,
|
|
userSessionTimeout,
|
|
userAdded,
|
|
userModified,
|
|
userDeleted,
|
|
groupAdded,
|
|
groupModified,
|
|
groupDeleted,
|
|
deviceUpdateStarted,
|
|
userBlocked,
|
|
powerControl,
|
|
userPasswordChanged,
|
|
passwordSettingsChanged,
|
|
firmwareFileDiscarded,
|
|
firmwareValidationFailed,
|
|
securityViolation,
|
|
logFileCleared,
|
|
thresholdAlarm,
|
|
outletGroupingConnectivityLost }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of traps."
|
|
::= { groups 9 }
|
|
|
|
|
|
-- Textual Conventions
|
|
|
|
MilliAmps ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type for reporting sensor readings and thresholds
|
|
associated with current sensors. If the underlying hardware
|
|
sensor indicates 1 amp, then the SNMP agent will report
|
|
a value of 1000 milliamps. The value is scaled in this
|
|
manner as a way to deal with floating point types
|
|
that SNMP does not currently support."
|
|
SYNTAX Unsigned32
|
|
|
|
MilliVolts ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type for reporting sensor readings and thresholds
|
|
associated with voltage sensors. If the underlying hardware
|
|
sensor indicates 1 volts, then the SNMP agent will report
|
|
a value of 1000 millivolts. The value is scaled in this
|
|
manner as a way to deal with floating point types
|
|
that SNMP does not currently support."
|
|
SYNTAX Unsigned32
|
|
|
|
Watts ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type for reporting sensor readings and thresholds
|
|
associated with active power sensors. If the underlying hardware
|
|
sensor indicates 1 watt, then the SNMP agent will report
|
|
a value of 1 watt. No scaling is performed for this type."
|
|
SYNTAX Unsigned32
|
|
|
|
VoltAmps ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type for reporting sensor readings and thresholds
|
|
associated with apparent power sensors. If the underlying hardware
|
|
sensor indicates 1 volt-amp, then the SNMP agent will report
|
|
a value of 1 volt-amp. No scaling is performed for this type."
|
|
SYNTAX Unsigned32
|
|
|
|
DegreesCelsius ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type for reporting sensor readings and thresholds
|
|
associated with temperature sensors. If the underlying hardware
|
|
sensor indicates 1 degree Celsius, then the SNMP agent will report
|
|
a value of 1 degree Celsius. No scaling is performed for this type."
|
|
SYNTAX Unsigned32
|
|
|
|
Hertz ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type for reporting sensor readings and thresholds
|
|
associated with frequency sensors. If the underlying hardware
|
|
sensor indicates 1 Hertz, then the SNMP agent will report
|
|
a value of 1 Hertz. No scaling is performed for this type."
|
|
SYNTAX Unsigned32
|
|
|
|
RelativeHumidity ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type for reporting sensor readings and thresholds
|
|
associated with humidity sensors. Relative humidity is
|
|
expressed as percentage and is defined as the ratio of the
|
|
partial pressure of water vapor in a gaseous mixture of
|
|
air and water vapor to the saturated vapor pressure of water
|
|
at a given temperature."
|
|
SYNTAX Unsigned32 (0..100)
|
|
|
|
PowerFactorPercentage ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type for reporting sensor readings and thresholds
|
|
associated with power factor sensors. The power factor of
|
|
an AC power system is defined as the ratio of the real
|
|
or active power to the apparent power and is a number
|
|
between 0 and 1. A PowerFactorPercentage value is calculated
|
|
by taking this ratio and multiplying by 100. The power factor
|
|
is used to indicate how efficiently a particular load is
|
|
utilizing energy."
|
|
SYNTAX Unsigned32 (0..100)
|
|
|
|
SensorTypeEnumeration ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The types a sensor can be."
|
|
SYNTAX INTEGER { outletCurrent(0),
|
|
outletMaxCurrent(1),
|
|
outletVoltage(2),
|
|
outletActivePower(3),
|
|
outletApparentPower(4),
|
|
outletMaxActivePower(5),
|
|
outletAverageActivePower(6),
|
|
outletPowerFactor(7),
|
|
powerBranchVoltage(200),
|
|
powerBranchFrequency(201),
|
|
powerBranchTemperature(202),
|
|
powerBranchCurrent(203),
|
|
environmentalTemp1(300),
|
|
environmentalTemp2(301),
|
|
environmentalTemp3(302),
|
|
environmentalTemp4(303),
|
|
environmentalTemp5(304),
|
|
environmentalTemp6(305),
|
|
environmentalTemp7(306),
|
|
environmentalTemp8(307),
|
|
environmentalHumidity1(400),
|
|
environmentalHumidity2(401),
|
|
environmentalHumidity3(402),
|
|
environmentalHumidity4(403),
|
|
environmentalHumidity5(404),
|
|
environmentalHumidity6(405),
|
|
environmentalHumidity7(406),
|
|
environmentalHumidity8(407),
|
|
unitRmsCurrent(500),
|
|
unitMaxRmsCurrent(501),
|
|
unitVoltage(502),
|
|
unitCpuTemp(503),
|
|
unitActivePower(504),
|
|
unitApparentPower(505),
|
|
unitCircuitBreak0State(550),
|
|
unitCircuitBreak1State(551),
|
|
unitCircuitBreak2State(552),
|
|
unitCircuitBreak0Current(600),
|
|
unitCircuitBreak1Current(601),
|
|
unitCircuitBreak2Current(602) }
|
|
|
|
SensorStateEnumeration ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The states a sensor can be in."
|
|
SYNTAX INTEGER { unavailable(-1),
|
|
ok(0),
|
|
belowLowerWarning(1),
|
|
aboveUpperWarning(2),
|
|
belowLowerCritical(3),
|
|
aboveUpperCritical(4) }
|
|
|
|
|
|
-- the info group
|
|
|
|
firmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current firmware version"
|
|
::= { info 1 }
|
|
|
|
serialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial number."
|
|
::= { info 2 }
|
|
|
|
ipAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current IP address. A value of 0.0.0.0 indicates an error
|
|
or an unset option."
|
|
::= { info 3 }
|
|
|
|
netmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current Netmask. A value of 0.0.0.0 indicates an error
|
|
or an unset option."
|
|
::= { info 4 }
|
|
|
|
gateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current Gateway. A value of 0.0.0.0 indicates an error
|
|
or an unset option."
|
|
::= { info 5 }
|
|
|
|
mac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current MAC address."
|
|
::= { info 6 }
|
|
|
|
hardwareRev OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hardware revision number."
|
|
::= { info 7 }
|
|
|
|
userName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The login of a user."
|
|
::= { info 10 }
|
|
|
|
objectName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The model type of the device"
|
|
::= { info 12 }
|
|
|
|
objectInstance OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The device name"
|
|
::= { info 13}
|
|
|
|
targetUser OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user record being operated on"
|
|
::= { info 14}
|
|
|
|
groupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group record being operated on"
|
|
::= { info 15 }
|
|
|
|
imageVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the Upgrade image"
|
|
::= { info 18 }
|
|
|
|
sensorDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sensor description indicating which sensor experienced a threshold exceeded
|
|
event. When applicable the description will indicate the sensor number."
|
|
::= { info 19 }
|
|
|
|
thresholdDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Threshold description indicating which configured threshold has been triggered (or cleared)."
|
|
::= { info 20 }
|
|
|
|
thresholdSeverity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"String (Warning, Critical, etc...) indicating the severity of the threshold which has been triggered (or cleared)."
|
|
::= { info 21 }
|
|
|
|
thresholdEventType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"String (triggered, cleared) indicating if the threshold event indicates that a configured threshold
|
|
has been triggered or cleared."
|
|
::= { info 22 }
|
|
|
|
status OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The success status of an operation"
|
|
::= { info 23 }
|
|
|
|
slaveIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In a shepherding configuration, this is the IP address of slave PDU. A value of 0.0.0.0 indicates an error
|
|
or an unset option."
|
|
::= { info 24}
|
|
|
|
-- the outlets group
|
|
|
|
-- Implementation for managing the outlets
|
|
|
|
outletCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outlets (regardless of
|
|
their current state) present on this pdu."
|
|
::= { outlets 1 }
|
|
|
|
|
|
-- the outlets table
|
|
|
|
-- The outlets table contains information on the pdu's outlets.
|
|
-- It further provides functions for managing them.
|
|
|
|
outletTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OutletEntryStruct
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of outlet entries. The number of
|
|
entries is given by the value of outletCount."
|
|
::= { outlets 2 }
|
|
|
|
outletEntry OBJECT-TYPE
|
|
SYNTAX OutletEntryStruct
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An outlet entry containing objects at the
|
|
for a particular outlet."
|
|
INDEX { outletIndex }
|
|
::= { outletTable 1 }
|
|
|
|
OutletEntryStruct ::= SEQUENCE { outletIndex Integer32,
|
|
outletLabel DisplayString,
|
|
outletOperationalState INTEGER,
|
|
outletCurrent MilliAmps,
|
|
outletMaxCurrent MilliAmps,
|
|
outletVoltage MilliVolts,
|
|
outletActivePower Watts,
|
|
outletApparentPower VoltAmps,
|
|
outletPowerFactor PowerFactorPercentage,
|
|
outletCurrentUpperWarning MilliAmps,
|
|
outletCurrentUpperCritical MilliAmps }
|
|
|
|
outletIndex OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each outlet. Its value
|
|
ranges between 1 and the value of outletCount."
|
|
::= { outletEntry 1 }
|
|
|
|
outletLabel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing information
|
|
about the outlet."
|
|
::= { outletEntry 2 }
|
|
|
|
outletOperationalState OBJECT-TYPE
|
|
SYNTAX INTEGER { error(-1),
|
|
off(0),
|
|
on(1),
|
|
cycling(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value for each outlet which describes the
|
|
operational state of the outlet. It is also
|
|
used to set the operational state of the outlet"
|
|
::= { outletEntry 3 }
|
|
|
|
outletCurrent OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for the current sensor
|
|
attached to the outlet. This value is
|
|
reported in milliamps (1/1000th of an amp)"
|
|
::= { outletEntry 4 }
|
|
|
|
outletMaxCurrent OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for the max. current sensor
|
|
attached to the outlet. This value is
|
|
reported in milliamps (1/1000th of an amp)"
|
|
::= { outletEntry 5 }
|
|
|
|
outletVoltage OBJECT-TYPE
|
|
SYNTAX MilliVolts
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for the voltage sensor
|
|
attached to the outlet.This value is
|
|
reported in millivolts (1/1000th of a volt)"
|
|
::= { outletEntry 6 }
|
|
|
|
outletActivePower OBJECT-TYPE
|
|
SYNTAX Watts
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for the active power sensor
|
|
attached to the outlet. This value is
|
|
reported in Watts."
|
|
::= { outletEntry 7 }
|
|
|
|
outletApparentPower OBJECT-TYPE
|
|
SYNTAX VoltAmps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for the apparent power sensor
|
|
attached to the outlet. This value is
|
|
reported in Volt-Amps"
|
|
::= { outletEntry 8 }
|
|
|
|
outletPowerFactor OBJECT-TYPE
|
|
SYNTAX PowerFactorPercentage
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for the power factor
|
|
of the outlet. The reading represents a
|
|
percentage in the range of 0% to 100%."
|
|
::= { outletEntry 9 }
|
|
|
|
outletCurrentUpperWarning OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper warning (non-critical)
|
|
current threshold for the outlet. This value is
|
|
reported in milliamps (1/1000th of an amp)"
|
|
::= { outletEntry 21 }
|
|
|
|
outletCurrentUpperCritical OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper critical current
|
|
threshold for the outlet. This value is
|
|
reported in milliamps (1/1000th of an amp)"
|
|
::= { outletEntry 23 }
|
|
|
|
|
|
|
|
-- the unitReadings group
|
|
|
|
-- The unitReadings group contains sensor reading values
|
|
-- for the PDU unit as a whole
|
|
|
|
unitCurrent OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's current sensor in millamps."
|
|
::= { unitReadings 1 }
|
|
|
|
unitVoltage OBJECT-TYPE
|
|
SYNTAX MilliVolts
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's voltage sensor in millivolts."
|
|
::= { unitReadings 2 }
|
|
|
|
unitActivePower OBJECT-TYPE
|
|
SYNTAX Watts
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's voltage sensor in volt-amps."
|
|
::= { unitReadings 3 }
|
|
|
|
unitApparentPower OBJECT-TYPE
|
|
SYNTAX Watts
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's voltage sensor in volt-amps."
|
|
::= { unitReadings 4 }
|
|
|
|
unitCpuTemp OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's CPU temperature sensor in degrees Celsius."
|
|
::= { unitReadings 5 }
|
|
|
|
|
|
unitCircuitBreak0State OBJECT-TYPE
|
|
SYNTAX INTEGER { unavailable(-1),
|
|
ok(0),
|
|
tripped(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's circuit breaker state sensor 0."
|
|
::= { unitReadings 20 }
|
|
|
|
unitCircuitBreak1State OBJECT-TYPE
|
|
SYNTAX INTEGER { unavailable(-1),
|
|
ok(0),
|
|
tripped(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's circuit breaker state sensor 1."
|
|
::= { unitReadings 21 }
|
|
|
|
unitCircuitBreak2State OBJECT-TYPE
|
|
SYNTAX INTEGER { unavailable(-1),
|
|
ok(0),
|
|
tripped(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's circuit breaker state sensor 2."
|
|
::= { unitReadings 22 }
|
|
|
|
unitCircuitBreak0Current OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's circuit breaker current sensor 0."
|
|
::= { unitReadings 40 }
|
|
|
|
unitCircuitBreak1Current OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's circuit breaker current sensor 1."
|
|
::= { unitReadings 41 }
|
|
|
|
unitCircuitBreak2Current OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for the unit's circuit breaker current sensor 2."
|
|
::= { unitReadings 42 }
|
|
|
|
unitVoltageLowerWarning OBJECT-TYPE
|
|
SYNTAX MilliVolts
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower warning (non-critical) unit level voltage threshold."
|
|
::= { unitReadings 60 }
|
|
|
|
unitVoltageLowerCritical OBJECT-TYPE
|
|
SYNTAX MilliVolts
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower critical unit level voltage threshold."
|
|
::= { unitReadings 61 }
|
|
|
|
unitVoltageUpperWarning OBJECT-TYPE
|
|
SYNTAX MilliVolts
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper warning (non-critical) unit level voltage threshold."
|
|
::= { unitReadings 62 }
|
|
|
|
unitVoltageUpperCritical OBJECT-TYPE
|
|
SYNTAX MilliVolts
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper critical unit level voltage threshold."
|
|
::= { unitReadings 63 }
|
|
|
|
unitCurrentUpperWarning OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper warning (non-critical) unit level current threshold."
|
|
::= { unitReadings 70 }
|
|
|
|
unitCurrentUpperCritical OBJECT-TYPE
|
|
SYNTAX MilliAmps
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper critical unit level current threshold. NOTE: This
|
|
particular threshold is NOT settable "
|
|
::= { unitReadings 71 }
|
|
|
|
unitTempLowerWarning OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower warning (non-critical) unit level temperature threshold."
|
|
::= { unitReadings 80 }
|
|
|
|
unitTempLowerCritical OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower critical unit level temperature threshold."
|
|
::= { unitReadings 81 }
|
|
|
|
unitTempUpperWarning OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper warning (non-critical) unit level temperature threshold."
|
|
::= { unitReadings 82 }
|
|
|
|
unitTempUpperCritical OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper critical unit level temperature threshold."
|
|
::= { unitReadings 83 }
|
|
|
|
|
|
-- the externalTemperature group
|
|
|
|
-- Implementation for managing external temperature sensors
|
|
|
|
tempSensorCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of external temperature sensors (regardless of
|
|
their current state) present on this pdu."
|
|
::= { environmental 1 }
|
|
|
|
|
|
-- the temperature sensors table
|
|
|
|
-- The tempSensorTable table contains information on the pdu's external temperature sensors.
|
|
|
|
tempSensorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TempSensorEntryStruct
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of temperature sensor entries. The number of
|
|
entries is given by the value of tempSensorCount."
|
|
::= { environmental 2 }
|
|
|
|
tempSensorEntry OBJECT-TYPE
|
|
SYNTAX TempSensorEntryStruct
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing sensor reading and threshold
|
|
settings for a particular temperature sensor."
|
|
INDEX { tempSensorIndex }
|
|
::= { tempSensorTable 1 }
|
|
|
|
TempSensorEntryStruct ::= SEQUENCE { tempSensorIndex Integer32,
|
|
tempSensorLabel DisplayString,
|
|
temperature DegreesCelsius,
|
|
tempLowerWarning DegreesCelsius,
|
|
tempUpperWarning DegreesCelsius,
|
|
tempLowerCritical DegreesCelsius,
|
|
tempUpperCritical DegreesCelsius,
|
|
tempLowerWarningReset DegreesCelsius,
|
|
tempUpperWarningReset DegreesCelsius,
|
|
tempLowerCriticalReset DegreesCelsius,
|
|
tempUpperCriticalReset DegreesCelsius }
|
|
|
|
tempSensorIndex OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each temperature sensor. Its value
|
|
ranges between 1 and tempSensorCount."
|
|
::= { tempSensorEntry 1 }
|
|
|
|
tempSensorLabel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A settable human-readable label for the external temperature
|
|
sensor. One possible use for this label is to convey sensor
|
|
location."
|
|
::= { tempSensorEntry 2 }
|
|
|
|
temperature OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the external temperature sensor reported
|
|
in degrees celsius."
|
|
::= { tempSensorEntry 3 }
|
|
|
|
tempLowerWarning OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower warning (non-critical) threshold."
|
|
::= { tempSensorEntry 4 }
|
|
|
|
tempUpperWarning OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper warning (non-critical) threshold."
|
|
::= { tempSensorEntry 5 }
|
|
|
|
tempLowerCritical OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower critical threshold."
|
|
::= { tempSensorEntry 6 }
|
|
|
|
tempUpperCritical OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper critical threshold."
|
|
::= { tempSensorEntry 7 }
|
|
|
|
tempLowerWarningReset OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower warning (non-critical) reset/hysteresis value."
|
|
::= { tempSensorEntry 8 }
|
|
|
|
tempUpperWarningReset OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper warning (non-critical) reset/hysteresis value."
|
|
::= { tempSensorEntry 9 }
|
|
|
|
tempLowerCriticalReset OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower critical reset/hysteresis value."
|
|
::= { tempSensorEntry 10 }
|
|
|
|
tempUpperCriticalReset OBJECT-TYPE
|
|
SYNTAX DegreesCelsius
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper critical reset/hysteresis value."
|
|
::= { tempSensorEntry 11 }
|
|
|
|
-- the externalHumidity group
|
|
|
|
-- Implementation for managing external humidity sensors
|
|
|
|
humiditySensorCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of external humidity sensors (regardless of
|
|
their current state) present on this pdu."
|
|
::= { environmental 3 }
|
|
|
|
|
|
-- the humidity sensors table
|
|
|
|
-- The humiditySensorTable table contains information on the pdu's external humidity sensors.
|
|
|
|
humiditySensorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HumiditySensorEntryStruct
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of humidity sensor entries. The number of
|
|
entries is given by the value of humiditySensorCount."
|
|
::= { environmental 4 }
|
|
|
|
humiditySensorEntry OBJECT-TYPE
|
|
SYNTAX HumiditySensorEntryStruct
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing sensor reading and threshold
|
|
settings for a particular humidity sensor."
|
|
INDEX { humiditySensorIndex }
|
|
::= { humiditySensorTable 1 }
|
|
|
|
HumiditySensorEntryStruct ::= SEQUENCE { humiditySensorIndex Integer32,
|
|
humiditySensorLabel DisplayString,
|
|
humidity RelativeHumidity,
|
|
humidityLowerWarning RelativeHumidity,
|
|
humidityUpperWarning RelativeHumidity,
|
|
humidityLowerCritical RelativeHumidity,
|
|
humidityUpperCritical RelativeHumidity,
|
|
humidityLowerWarningReset RelativeHumidity,
|
|
humidityUpperWarningReset RelativeHumidity,
|
|
humidityLowerCriticalReset RelativeHumidity,
|
|
humidityUpperCriticalReset RelativeHumidity }
|
|
|
|
humiditySensorIndex OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each humidity sensor. Its value
|
|
ranges between 1 and humiditySensorCount."
|
|
::= { humiditySensorEntry 1 }
|
|
|
|
humiditySensorLabel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A settable human-readable label for the external humidity
|
|
sensor. One possible use for this label is to convey sensor
|
|
location."
|
|
::= { humiditySensorEntry 2 }
|
|
|
|
humidity OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the external humidity sensor reported
|
|
as relative humidity (a percentage)."
|
|
::= { humiditySensorEntry 3 }
|
|
|
|
humidityLowerWarning OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower warning (non-critical) threshold."
|
|
::= { humiditySensorEntry 4 }
|
|
|
|
humidityUpperWarning OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper warning (non-critical) threshold."
|
|
::= { humiditySensorEntry 5 }
|
|
|
|
humidityLowerCritical OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower critical threshold."
|
|
::= { humiditySensorEntry 6 }
|
|
|
|
humidityUpperCritical OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper critical threshold."
|
|
::= { humiditySensorEntry 7 }
|
|
|
|
humidityLowerWarningReset OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower warning (non-critical) reset/hysteresis value."
|
|
::= { humiditySensorEntry 8 }
|
|
|
|
humidityUpperWarningReset OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper warning (non-critical) reset/hysteresis value."
|
|
::= { humiditySensorEntry 9 }
|
|
|
|
humidityLowerCriticalReset OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the lower critical reset/hysteresis value."
|
|
::= { humiditySensorEntry 10 }
|
|
|
|
humidityUpperCriticalReset OBJECT-TYPE
|
|
SYNTAX RelativeHumidity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the upper critical reset/hysteresis value."
|
|
::= { humiditySensorEntry 11 }
|
|
|
|
|
|
-- Start the traps
|
|
|
|
rebootStarted NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reboot process has started"
|
|
::= { traps 1 }
|
|
|
|
rebootCompleted NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reboot process is complete"
|
|
::= { traps 2 }
|
|
|
|
userLogin NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
ipAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user logged in"
|
|
::= { traps 3 }
|
|
|
|
userLogout NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
ipAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user logged out"
|
|
::= { traps 4 }
|
|
|
|
userAuthenticationFailure NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
ipAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user authentication attempt failed"
|
|
::= { traps 5 }
|
|
|
|
userSessionTimeout NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
ipAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user timed out from the device"
|
|
::= { traps 8 }
|
|
|
|
userAdded NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
targetUser }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user was added to the system"
|
|
::= { traps 11 }
|
|
|
|
userModified NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
targetUser }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user account was modified"
|
|
::= { traps 12 }
|
|
|
|
userDeleted NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
targetUser }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user was deleted from the system"
|
|
::= { traps 13 }
|
|
|
|
groupAdded NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
groupName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group was added to the system"
|
|
::= { traps 14 }
|
|
|
|
groupModified NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
groupName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group was modified"
|
|
::= { traps 15 }
|
|
|
|
|
|
groupDeleted NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
groupName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group was deleted from the system"
|
|
::= { traps 16 }
|
|
|
|
deviceUpdateStarted NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
ipAddress,
|
|
imageVersion }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The device update has started"
|
|
::= { traps 20 }
|
|
|
|
userBlocked NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
ipAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A blocked user tried to log in"
|
|
::= { traps 22 }
|
|
|
|
powerControl NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
ipAddress,
|
|
outletLabel,
|
|
outletOperationalState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An outlet has been switched"
|
|
::= { traps 23 }
|
|
|
|
userPasswordChanged NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
targetUser,
|
|
ipAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user password was changed"
|
|
::= { traps 24 }
|
|
|
|
passwordSettingsChanged NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
status }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Strong password settings changed "
|
|
::= { traps 28 }
|
|
|
|
-- Start new event to support RP products
|
|
|
|
firmwareFileDiscarded NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A firmware file discarded "
|
|
::= { traps 36 }
|
|
|
|
firmwareValidationFailed NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A firmware validation failed "
|
|
::= { traps 38 }
|
|
|
|
securityViolation NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName,
|
|
ipAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Security violation."
|
|
::= { traps 39 }
|
|
|
|
logFileCleared NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
userName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The log file has been cleared."
|
|
::= { traps 41 }
|
|
|
|
--sensor threshold exceeded traps
|
|
|
|
thresholdAlarm NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
ipAddress,
|
|
sensorDescr,
|
|
thresholdDescr,
|
|
thresholdSeverity,
|
|
thresholdEventType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured sensor theshold event. The 'thresholdType' variable will indicate whether or not
|
|
the threshold triggered or cleared"
|
|
::= { traps 45 }
|
|
|
|
-- Shepherd Application traps
|
|
outletGroupingConnectivityLost NOTIFICATION-TYPE
|
|
OBJECTS { objectName,
|
|
objectInstance,
|
|
ipAddress,
|
|
slaveIpAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Master PDU lost contact with the slave PDU in an outlet grouping configuration."
|
|
::= { traps 50 }
|
|
|
|
|
|
END
|