Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
484 lines
17 KiB
Text
484 lines
17 KiB
Text
|
|
|
|
-- *****************************************************************
|
|
-- DLINKSW-CPU-PROTECT-MIB.mib : CPU Protection MIB
|
|
--
|
|
-- Copyright (c) 2012 D-Link Corporation, all rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
DLINKSW-CPU-PROTECT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
Integer32, Counter64, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
dlinkIndustrialCommon
|
|
FROM DLINK-ID-REC-MIB;
|
|
|
|
|
|
dlinkSwCpuProtectMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201208080000Z"
|
|
ORGANIZATION "D-Link Corp."
|
|
CONTACT-INFO
|
|
" D-Link Corporation
|
|
|
|
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
|
|
Taipei City 114, Taiwan, R.O.C
|
|
Tel: +886-2-66000123
|
|
E-mail: tsd@dlink.com.tw
|
|
"
|
|
DESCRIPTION
|
|
"The MIB module for managing CPU protection."
|
|
REVISION "201208080000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { dlinkIndustrialCommon 19 }
|
|
|
|
|
|
|
|
--
|
|
-- Textual conventions
|
|
--
|
|
|
|
CpuProtectProtocolType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents a protocol type.
|
|
Note that a particular agent may support only certain protocol
|
|
types. Thus, the valid values of this object are project
|
|
dependent.
|
|
An agent may respond with an error (e.g., 'inconsistentValue ')
|
|
to a management SET operation which attempts to modify
|
|
the value to one which is not supported by the managed device.
|
|
arp(1) indicates IP Address Resolution Protocol (ARP).
|
|
bgp(2) indicates Border Gateway Protocol.
|
|
dhcp(3) indicates Dynamic Host Configuration Protocol.
|
|
dhcpv6(4) indicates Dynamic Host Configuration Protocol for IPv6.
|
|
dns(5) indicates Domain Name Services.
|
|
dot1x(6) indicates IEEE 802.1X (Port Based Network Access Control).
|
|
dvmrp(7) indicates Distance Vector Multicast Routing Protocol.
|
|
gvrp(8) indicates GARP VLAN Registration Protocol.
|
|
icmp(9) indicates IPv4 Internet Control Message Protocol.
|
|
icmpv6Ndp(10) indicates IPv6 ICMP Neighbor Discover Protocol (NS/NA/RS/RA).
|
|
icmpv6Other(11) indicates IPv6 ICMP except NDP NS/NA/RS/RA.
|
|
igmp(12) indicates Internet Group Management Protocol.
|
|
lacp(13), indicates Link Aggregation Control Protocol.
|
|
ntp(14), indicates Network Time Protocol.
|
|
ospf(15), indicates Open Shortest Path First.
|
|
ospfv3(16), indicates OSPF for IPv6.
|
|
pim(17), indicates Protocol Independent Multicast.
|
|
pppoe(18), indicates Point-to-Point Protocol over Ethernet.
|
|
rip(19), indicates Routing Information Protocol.
|
|
ripng(20), indicates Routing Information Protocol for IPv6.
|
|
snmp(21), indicates Simple Network Management Protocol.
|
|
ssh(22), indicates Secured shell.
|
|
stp(23), indicates Spanning Tree Protocol (IEEE 802.1D).
|
|
telnet(24), indicates Telnet.
|
|
tftp(25), indicates Trivial File Transfer Protocol.
|
|
vrrp(26), indicates Virtual Router Redundancy Protocol.
|
|
web(27) indicates HTTP and HTTPS.
|
|
"
|
|
SYNTAX INTEGER
|
|
{
|
|
arp(1),
|
|
bgp(2),
|
|
dhcp(3),
|
|
dhcpv6(4),
|
|
dns(5),
|
|
dot1x(6),
|
|
dvmrp(7),
|
|
gvrp(8),
|
|
icmp(9),
|
|
icmpv6Ndp(10),
|
|
icmpv6Other(11),
|
|
igmp(12),
|
|
lacp(13),
|
|
ntp(14),
|
|
ospf(15),
|
|
ospfv3(16),
|
|
pim(17),
|
|
pppoe(18),
|
|
rip(19),
|
|
ripng(20),
|
|
snmp(21),
|
|
ssh(22),
|
|
stp(23),
|
|
telnet(24),
|
|
tftp(25),
|
|
vrrp(26),
|
|
web(27)
|
|
}
|
|
|
|
MaxRate ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range for configuring rate-limit in packet per second (pps).
|
|
Note that a particular agent may support different rate range.
|
|
Thus, the valid values are project dependent.
|
|
An agent may respond with an error (e.g., 'inconsistentValue ')
|
|
to a management SET operation which attempts to modify
|
|
the value to one which is not supported by the managed device.
|
|
The value -1 has a special meaning. When this object is
|
|
set to -1, there is no rate-limit of the entry."
|
|
SYNTAX Integer32 (-1 | 0..65535)
|
|
|
|
UnitID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the slot (for a chassis device) or
|
|
unit number (for stacking device).
|
|
For a standalone device, 0 is used for UnitID.
|
|
Note that a particular agent may support different range
|
|
of unit/slot ID.
|
|
Thus, the valid values are project dependent.
|
|
An agent may respond with an error (e.g., 'inconsistentValue ')
|
|
to a management SET operation which attempts to modify
|
|
the value to one which is not supported by the managed device.
|
|
"
|
|
SYNTAX Integer32 (0 | 1..64)
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
dCpuProtectMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwCpuProtectMIB 0 }
|
|
dCpuProtectMIBObjects OBJECT IDENTIFIER ::= { dlinkSwCpuProtectMIB 1 }
|
|
dCpuProtectMIBConformance OBJECT IDENTIFIER ::= { dlinkSwCpuProtectMIB 2 }
|
|
|
|
|
|
dCpuProtectMIBObjectsCtrl OBJECT IDENTIFIER ::= { dCpuProtectMIBObjects 2 }
|
|
|
|
-- ***************************************************************************
|
|
-- dCpuProtectProtoRateLimitTable
|
|
-- ***************************************************************************
|
|
dCpuProtectProtoRateLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DCpuProtectProtoRateLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object configure the rate-limit of traffic destined to CPU
|
|
based on protocol type."
|
|
::= { dCpuProtectMIBObjectsCtrl 1 }
|
|
|
|
dCpuProtectProtoRateLimitEntry OBJECT-TYPE
|
|
SYNTAX DCpuProtectProtoRateLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object configures rate-limit control based on a specific
|
|
protocol type."
|
|
INDEX { dCpuProtectProtoRLType }
|
|
::= { dCpuProtectProtoRateLimitTable 1 }
|
|
|
|
DCpuProtectProtoRateLimitEntry ::=
|
|
SEQUENCE {
|
|
dCpuProtectProtoRLType CpuProtectProtocolType,
|
|
dCpuProtectProtoRLRate MaxRate,
|
|
dCpuProtectProtoRLClearCounter INTEGER
|
|
}
|
|
|
|
dCpuProtectProtoRLType OBJECT-TYPE
|
|
SYNTAX CpuProtectProtocolType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the protocol type."
|
|
::= { dCpuProtectProtoRateLimitEntry 1 }
|
|
|
|
dCpuProtectProtoRLRate OBJECT-TYPE
|
|
SYNTAX MaxRate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the rate-limit of the specific
|
|
protocol type.
|
|
The value of -1 has the special meaning of identifying
|
|
that there is no rate-limit of the specific protocol type."
|
|
DEFVAL { -1 }
|
|
::= { dCpuProtectProtoRateLimitEntry 2 }
|
|
|
|
|
|
dCpuProtectProtoRLClearCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ clear(1),
|
|
noOp(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to reset the counter of the specific
|
|
protocol type when set to 'clear'.
|
|
No action is taken if this object is set to 'noOp'.
|
|
When read, the value 'noOp' is returned."
|
|
DEFVAL { noOp }
|
|
::= { dCpuProtectProtoRateLimitEntry 3 }
|
|
|
|
|
|
|
|
-- ***************************************************************************
|
|
-- dCpuProtectSubIntfRLTable
|
|
-- ***************************************************************************
|
|
dCpuProtectSubIntfRLTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DCpuProtectSubIntfRLEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table consists of the rate-limit information of the
|
|
sub-interface."
|
|
::= { dCpuProtectMIBObjectsCtrl 2 }
|
|
|
|
dCpuProtectSubIntfRLEntry OBJECT-TYPE
|
|
SYNTAX DCpuProtectSubIntfRLEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object configure rate-limit control based on a specific
|
|
sub-interface."
|
|
INDEX { dCpuProtectSubIntfRLType }
|
|
::= { dCpuProtectSubIntfRLTable 1 }
|
|
|
|
DCpuProtectSubIntfRLEntry ::=
|
|
SEQUENCE {
|
|
dCpuProtectSubIntfRLType INTEGER,
|
|
dCpuProtectSubIntfRLRate MaxRate,
|
|
dCpuProtectSubIntfRLClearCounter INTEGER
|
|
}
|
|
|
|
dCpuProtectSubIntfRLType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ manage(1),
|
|
protocol(2),
|
|
route(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of sub-interface."
|
|
::= { dCpuProtectSubIntfRLEntry 1 }
|
|
|
|
dCpuProtectSubIntfRLRate OBJECT-TYPE
|
|
SYNTAX MaxRate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the rate-limit of the specific
|
|
sub-interface.
|
|
The value of -1 has the special meaning of identifying
|
|
that there is no rate-limit of the specific sub-interface."
|
|
DEFVAL { -1 }
|
|
::= { dCpuProtectSubIntfRLEntry 2 }
|
|
|
|
dCpuProtectSubIntfRLClearCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ clear(1),
|
|
noOp(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to reset the counter of the specific
|
|
sub-interface when set to 'clear'.
|
|
No action is taken if this object is set to 'noOp'.
|
|
When read, the value 'noOp' is returned."
|
|
DEFVAL { noOp }
|
|
::= { dCpuProtectSubIntfRLEntry 3 }
|
|
|
|
dCpuProtectMIBObjectsCounters OBJECT IDENTIFIER
|
|
::= { dCpuProtectMIBObjects 3 }
|
|
|
|
-- ***************************************************************************
|
|
-- dCpuProtectProtoRLCntTable
|
|
-- ***************************************************************************
|
|
dCpuProtectProtoRLCntTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DCpuProtectProtoRLCntEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table consists of the traffic statistics by protocol type."
|
|
::= { dCpuProtectMIBObjectsCounters 1 }
|
|
|
|
dCpuProtectProtoRLCntEntry OBJECT-TYPE
|
|
SYNTAX DCpuProtectProtoRLCntEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The per unit/slot traffic statistics about a protocol type.
|
|
Objects in this table are read-only and appear
|
|
automatically whenever the value of dCpuProtectProtoRLRate of a row
|
|
in the dCpuProtectProtoRateLimitTable is not -1 (no-limit)."
|
|
INDEX { dCpuProtectProtoRLCntType, dCpuProtectProtoRLCntUnitID }
|
|
::= { dCpuProtectProtoRLCntTable 1 }
|
|
|
|
DCpuProtectProtoRLCntEntry ::=
|
|
SEQUENCE {
|
|
dCpuProtectProtoRLCntType CpuProtectProtocolType,
|
|
dCpuProtectProtoRLCntUnitID UnitID,
|
|
dCpuProtectProtoRLCntTotalCnt Counter64,
|
|
dCpuProtectProtoRLCntDropCnt Counter64
|
|
}
|
|
|
|
dCpuProtectProtoRLCntType OBJECT-TYPE
|
|
SYNTAX CpuProtectProtocolType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Protocol type."
|
|
::= { dCpuProtectProtoRLCntEntry 1 }
|
|
|
|
dCpuProtectProtoRLCntUnitID OBJECT-TYPE
|
|
SYNTAX UnitID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the unit/slot ID (for a chassis device)
|
|
or unit number (for stacking device). For a standalone device,
|
|
0 is used for UnitID."
|
|
::= { dCpuProtectProtoRLCntEntry 2 }
|
|
|
|
dCpuProtectProtoRLCntTotalCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the counter which counts the packets
|
|
received by CPU (per unit/slot) for the protocol type."
|
|
::= { dCpuProtectProtoRLCntEntry 3 }
|
|
|
|
dCpuProtectProtoRLCntDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the counter which counts the dropped
|
|
packets due to exceeding the configured rate-limit."
|
|
::= { dCpuProtectProtoRLCntEntry 4 }
|
|
|
|
-- ***************************************************************************
|
|
-- dCpuProtectSubIntfRLCounterTable
|
|
-- ***************************************************************************
|
|
dCpuProtectSubIntfRLCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DCpuProtectSubIntfRLCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table consists of the traffic statistics by sub-interface."
|
|
::= { dCpuProtectMIBObjectsCounters 2 }
|
|
|
|
dCpuProtectSubIntfRLCounterEntry OBJECT-TYPE
|
|
SYNTAX DCpuProtectSubIntfRLCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The per unit traffic statistics about a sub-interface.
|
|
Objects in this table are read-only and appear
|
|
automatically whenever the value of dCpuProtectSubIntfRLRate of a row
|
|
in the dCpuProtectSubIntfRLTable is not -1 (no-limit)."
|
|
INDEX { dCpuProtectSubIntfRLCntType, dCpuProtectSubIntfRLCntUnitID }
|
|
::= { dCpuProtectSubIntfRLCounterTable 1 }
|
|
|
|
DCpuProtectSubIntfRLCounterEntry ::=
|
|
SEQUENCE {
|
|
dCpuProtectSubIntfRLCntType INTEGER,
|
|
dCpuProtectSubIntfRLCntUnitID UnitID,
|
|
dCpuProtectSubIntfRLCntTotalCnt Counter64,
|
|
dCpuProtectSubIntfRLCntDropCnt Counter64
|
|
}
|
|
|
|
dCpuProtectSubIntfRLCntType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ manage(1),
|
|
protocol(2),
|
|
route(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of sub-interface."
|
|
::= { dCpuProtectSubIntfRLCounterEntry 1 }
|
|
|
|
dCpuProtectSubIntfRLCntUnitID OBJECT-TYPE
|
|
SYNTAX UnitID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the slot (for a chassis device) or
|
|
unit number (for stacking device). For a standalone device,
|
|
0 is used for UnitID."
|
|
::= { dCpuProtectSubIntfRLCounterEntry 2 }
|
|
|
|
dCpuProtectSubIntfRLCntTotalCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the counter which counts the packets
|
|
received by CPU (per unit/slot) for the subinterface."
|
|
::= { dCpuProtectSubIntfRLCounterEntry 3 }
|
|
|
|
dCpuProtectSubIntfRLCntDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the counter which counts the dropped
|
|
packets due to exceeding the configured rate-limit."
|
|
::= { dCpuProtectSubIntfRLCounterEntry 4 }
|
|
|
|
-- ***************************************************************************
|
|
-- Conformance
|
|
-- ***************************************************************************
|
|
|
|
dCpuProtectMIBCompliances OBJECT IDENTIFIER ::= { dCpuProtectMIBConformance 1 }
|
|
|
|
dCpuProtectMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
DLINKSW-CPU-PROTECT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { dCpuProtectProtoGroup }
|
|
|
|
GROUP dCpuProtectSubIntfGroup
|
|
DESCRIPTION
|
|
"This group is required only if the agent implements
|
|
the rate-limit for traffic destined to CPU by sub-interface type."
|
|
::= { dCpuProtectMIBCompliances 1 }
|
|
|
|
|
|
dCpuProtectMIBGroups OBJECT IDENTIFIER ::= { dCpuProtectMIBConformance 2 }
|
|
|
|
dCpuProtectProtoGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{ dCpuProtectProtoRLRate,
|
|
dCpuProtectProtoRLClearCounter,
|
|
dCpuProtectProtoRLCntTotalCnt,
|
|
dCpuProtectProtoRLCntDropCnt
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the configuration or
|
|
statistics about the rate-limit of traffic destined to
|
|
CPU by protocol type."
|
|
::= { dCpuProtectMIBGroups 1 }
|
|
|
|
dCpuProtectSubIntfGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{ dCpuProtectSubIntfRLRate,
|
|
dCpuProtectSubIntfRLClearCounter,
|
|
dCpuProtectSubIntfRLCntTotalCnt,
|
|
dCpuProtectSubIntfRLCntDropCnt
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the configuration or
|
|
statistics about the rate-limit of traffic destined to
|
|
CPU by sub-interface type."
|
|
::= { dCpuProtectMIBGroups 2 }
|
|
|
|
END
|
|
|