Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
377 lines
10 KiB
Text
377 lines
10 KiB
Text
IDKT-F2-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
|
|
Counter32 FROM SNMPv2-SMI
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
dkt FROM DKT-MIB
|
|
MacAddress FROM SNMPv2-TC;
|
|
|
|
f2MIB MODULE-IDENTITY
|
|
LAST-UPDATED "201504210000Z"
|
|
ORGANIZATION "DKT A/S"
|
|
CONTACT-INFO
|
|
"postal: DKT A/S
|
|
Fanoevej 6
|
|
DK-4060 Kirke Saaby
|
|
Denmark
|
|
|
|
email: info@dktcomega.com"
|
|
DESCRIPTION "DKT 797xx series MIB."
|
|
::= { dkt 15 }
|
|
|
|
f2SwitchEngine OBJECT IDENTIFIER ::= { f2MIB 1 }
|
|
|
|
f2IGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is disabled."
|
|
::= { f2SwitchEngine 1 }
|
|
|
|
f2MTU OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8960)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set and get MTU. The following values are valid: 3072, 4096, 6144, 8960 (3k, 4k, 6k and 8960 bytes)"
|
|
::= { f2SwitchEngine 2 }
|
|
|
|
f2FWDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F2FWDMacAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get learned MAC addresses from LAN side of switch engine"
|
|
::= { f2SwitchEngine 3 }
|
|
|
|
f2FWDMacAddressEntry OBJECT-TYPE
|
|
SYNTAX F2FWDMacAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Learned MAC address from LAN side of switch engine"
|
|
::= { f2FWDTable 1 }
|
|
|
|
F2FWDMacAddressEntry ::= SEQUENCE {
|
|
F2FWDMacAddress OCTET STRING
|
|
}
|
|
|
|
F2FWDMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address from LAN"
|
|
::= { f2FWDMacAddressEntry 1 }
|
|
|
|
f2Ports OBJECT IDENTIFIER ::= { f2MIB 2 }
|
|
|
|
f2CPUPort OBJECT IDENTIFIER ::= { f2Ports 1 }
|
|
|
|
f2CPUPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays auto negotiation state for the port."
|
|
::= { f2CPUPort 1 }
|
|
|
|
f2CPUPortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the speed and duplex mode on the port."
|
|
::= { f2CPUPort 2 }
|
|
|
|
|
|
f2CPUPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Link status for the port"
|
|
::= { f2CPUPort 3 }
|
|
|
|
|
|
f2CPUPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
|
|
::= { f2CPUPort 4 }
|
|
|
|
|
|
f2CPUPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status for CPU port. Always 1 for enabled."
|
|
::= { f2CPUPort 5 }
|
|
|
|
|
|
f2WANPort OBJECT IDENTIFIER ::= { f2Ports 2 }
|
|
|
|
f2WANPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays auto negotiation state for the port."
|
|
::= { f2WANPort 1 }
|
|
|
|
f2WANPortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
|
|
::= { f2WANPort 2 }
|
|
|
|
|
|
f2WANPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Link status for the port"
|
|
::= { f2WANPort 3 }
|
|
|
|
|
|
f2WANPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
|
|
::= { f2WANPort 4 }
|
|
|
|
|
|
f2WANPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status for WAN port. Always 1 for enabled."
|
|
::= { f2WANPort 5 }
|
|
|
|
|
|
|
|
f2LAN1Port OBJECT IDENTIFIER ::= { f2Ports 3 }
|
|
|
|
f2LAN1PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays auto negotiation state for the port."
|
|
::= { f2LAN1Port 1 }
|
|
|
|
f2LAN1PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
|
|
::= { f2LAN1Port 2 }
|
|
|
|
|
|
f2LAN1PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Link status for the port"
|
|
::= { f2LAN1Port 3 }
|
|
|
|
|
|
f2LAN1PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
|
|
::= { f2LAN1Port 4 }
|
|
|
|
|
|
f2LAN1PortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables LAN1 port. Set to 1 for Enabled set to 0 for Disabled."
|
|
::= { f2LAN1Port 5 }
|
|
|
|
|
|
|
|
f2LAN2Port OBJECT IDENTIFIER ::= { f2Ports 4 }
|
|
|
|
f2LAN2PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays auto negotiation state for the port."
|
|
::= { f2LAN2Port 1 }
|
|
|
|
f2LAN2PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
|
|
::= { f2LAN2Port 2 }
|
|
|
|
|
|
f2LAN2PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Link status for the port"
|
|
::= { f2LAN2Port 3 }
|
|
|
|
|
|
f2LAN2PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
|
|
::= { f2LAN2Port 4 }
|
|
|
|
|
|
f2LAN2PortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables LAN2 port. Set to 1 for Enabled set to 0 for Disabled."
|
|
::= { f2LAN2Port 5 }
|
|
|
|
|
|
|
|
f2LAN3Port OBJECT IDENTIFIER ::= { f2Ports 5 }
|
|
|
|
f2LAN3PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays auto negotiation state for the port."
|
|
::= { f2LAN3Port 1 }
|
|
|
|
f2LAN3PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
|
|
::= { f2LAN3Port 2 }
|
|
|
|
|
|
f2LAN3PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Link status for the port"
|
|
::= { f2LAN3Port 3 }
|
|
|
|
|
|
f2LAN3PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
|
|
::= { f2LAN3Port 4 }
|
|
|
|
|
|
f2LAN3PortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables LAN3 port. Set to 1 for Enabled set to 0 for Disabled."
|
|
::= { f2LAN3Port 5 }
|
|
|
|
|
|
f2LAN4Port OBJECT IDENTIFIER ::= { f2Ports 6 }
|
|
|
|
f2LAN4PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays auto negotiation state for the port."
|
|
::= { f2LAN4Port 1 }
|
|
|
|
f2LAN4PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
|
|
::= { f2LAN4Port 2 }
|
|
|
|
|
|
f2LAN4PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Link status for the port"
|
|
::= { f2LAN4Port 3 }
|
|
|
|
|
|
f2LAN4PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
|
|
::= { f2LAN4Port 4 }
|
|
|
|
|
|
f2LAN4PortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables LAN4 port. Set to 1 for Enabled set to 0 for Disabled."
|
|
::= { f2LAN4Port 5 }
|
|
|
|
|
|
|
|
|
|
f2ModuleGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
f2SwitchEngine,
|
|
f2IGMPSnooping,
|
|
f2MTU,
|
|
f2Ports,
|
|
f2CPUPort,
|
|
f2CPUPortAutoNegotiation, f2CPUPortSpeedMode, f2CPUPortLinkStatus, f2CPUPortFlowControl, f2CPUPortEnable,
|
|
f2WANPort,
|
|
f2WANPortAutoNegotiation, f2WANPortSpeedMode, f2WANPortLinkStatus, f2WANPortFlowControl, f2WANPortEnable,
|
|
f2LAN1Port,
|
|
f2LAN1PortAutoNegotiation, f2LAN1PortSpeedMode, f2LAN1PortLinkStatus, f2LAN1PortFlowControl, f2LAN1PortEnable,
|
|
f2LAN2Port,
|
|
f2LAN2PortAutoNegotiation, f2LAN2PortSpeedMode, f2LAN2PortLinkStatus, f2LAN2PortFlowControl, f2LAN2PortEnable,
|
|
f2LAN3Port,
|
|
f2LAN3PortAutoNegotiation, f2LAN3PortSpeedMode, f2LAN3PortLinkStatus, f2LAN3PortFlowControl, f2LAN3PortEnable,
|
|
f2LAN4Port,
|
|
f2LAN4PortAutoNegotiation, f2LAN4PortSpeedMode, f2LAN4PortLinkStatus, f2LAN4PortFlowControl, f2LAN4PortEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects are related to the DKT 797xx series module, MIB rev 09."
|
|
::= { f2MIB 3 }
|
|
|
|
|
|
END
|