graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/comware/HH3C-STORAGE-SNAP-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1856 lines
57 KiB
Text
Raw Blame History

-- ===========================================================
-- Copyright (C) 2007 New H3C Tech. Co., Ltd. All rights reserved.
-- Description: The MIB is designed to manage the snap of storage device.
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 2007-09-14 created by yangqi
-- =================================================================
HH3C-STORAGE-SNAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32, Integer32,
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, DateAndTime, RowStatus
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
entPhysicalIndex
FROM ENTITY-MIB
Hh3cStorageOnlineState, Hh3cStorageEnableState, Hh3cStorageActionType,
Hh3cLvIDType, Hh3cRaidIDType, Hh3cExtendSelectPolicy, hh3cStorageRef
FROM HH3C-STORAGE-REF-MIB;
hh3cStorageSnap MODULE-IDENTITY
LAST-UPDATED "200709141452Z"
ORGANIZATION
"New H3C Technologies Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Technologies Co., Ltd.
Hai-Dian District Beijing P.R. China
Http://www.h3c.com
Zip:100085"
DESCRIPTION
"This MIB describes the general information about snap of storage device."
::= { hh3cStorageRef 2 }
hh3cSnapMibObjects OBJECT IDENTIFIER ::= { hh3cStorageSnap 1 }
hh3cGlobalSnapSettingsObject OBJECT IDENTIFIER ::= { hh3cSnapMibObjects 1 }
hh3cAddtionalSpaceMaxSize OBJECT-TYPE
SYNTAX Integer32
UNITS "TB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximal size of snapshot resource, safecache,
and Continued replication Resource ."
::= { hh3cGlobalSnapSettingsObject 1 }
-- Snap Resource Config Table
-- This table described how to config a snap on a special logic volume.
hh3cSnapConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cSnapConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config the snapshot resources for special logic
volumes."
::= { hh3cSnapMibObjects 2 }
hh3cSnapConfigEntry OBJECT-TYPE
SYNTAX Hh3cSnapConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing configuration about the snapshot resource."
INDEX
{
hh3cSnapLvIndex
}
::= { hh3cSnapConfigTable 1 }
Hh3cSnapConfigEntry ::= SEQUENCE
{
hh3cSnapLvIndex Hh3cLvIDType,
hh3cSnapAreaId Hh3cLvIDType,
hh3cSnapAreaAutoExpand Hh3cStorageEnableState,
hh3cSnapAreaThreshold Integer32,
hh3cSnapAreaIncSize Integer32,
hh3cSnapAreaMaxSize Integer32,
hh3cSnapAreaFullDeleteTM INTEGER,
hh3cSnapAreaNotify Hh3cStorageEnableState,
hh3cSnapAreaStatus Hh3cStorageOnlineState,
hh3cSnapRaidUuid Hh3cRaidIDType,
hh3cSnapRaidSize Integer32,
hh3cSnapRaidSelectPolicy Hh3cExtendSelectPolicy,
hh3cSnapAreaTotalSize Integer32,
hh3cSnapAreaFreeSize Integer32,
hh3cSnapExtendTimes Integer32,
hh3cSnapRowStatus RowStatus
}
hh3cSnapLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the index of hh3cSnapConfigTable. The object
identified by this index is the same object as identified by the
same value of hh3cLvIndex."
::= { hh3cSnapConfigEntry 1 }
hh3cSnapAreaId OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the snapshot resource of the logic volume."
::= { hh3cSnapConfigEntry 2 }
hh3cSnapAreaAutoExpand OBJECT-TYPE
SYNTAX Hh3cStorageEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes if the space of snapshot resource can be expanded
automatically."
DEFVAL { disable }
::= { hh3cSnapConfigEntry 3 }
hh3cSnapAreaThreshold OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaThreshold' means
the threshold of the snapshot resource."
::= { hh3cSnapConfigEntry 4 }
hh3cSnapAreaIncSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means
the amount of space to be allocated for each expansion."
::= { hh3cSnapConfigEntry 5 }
hh3cSnapAreaMaxSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the
max size of snapshot resource."
::= { hh3cSnapConfigEntry 6 }
hh3cSnapAreaFullDeleteTM OBJECT-TYPE
SYNTAX INTEGER
{
rotative(1),
none(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies if the snapshot resource is out of space and expand
failed, if the system delete the old timemark until enough space or not."
DEFVAL { none }
::= { hh3cSnapConfigEntry 7 }
hh3cSnapAreaNotify OBJECT-TYPE
SYNTAX Hh3cStorageEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes if a snapshot notification should be send to the client when the
system create a timemark."
::= { hh3cSnapConfigEntry 8 }
hh3cSnapAreaStatus OBJECT-TYPE
SYNTAX Hh3cStorageOnlineState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the state of the snapshot resource."
::= { hh3cSnapConfigEntry 9 }
hh3cSnapRaidUuid OBJECT-TYPE
SYNTAX Hh3cRaidIDType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the raid where the snapshot resource is created."
::= { hh3cSnapConfigEntry 10 }
hh3cSnapRaidSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the size designated when the snapshot resource
is created."
::= { hh3cSnapConfigEntry 11 }
hh3cSnapRaidSelectPolicy OBJECT-TYPE
SYNTAX Hh3cExtendSelectPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the policy when the snapshot resource is created
automatically.
Note that the value can not be 'none' when the value of associated
hh3cSnapRaidUuid object is equal to null."
DEFVAL { none }
::= { hh3cSnapConfigEntry 12 }
hh3cSnapAreaTotalSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current total size of the snapshot resource."
::= { hh3cSnapConfigEntry 13 }
hh3cSnapAreaFreeSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the free size of the snapshot resource."
::= { hh3cSnapConfigEntry 14 }
hh3cSnapExtendTimes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the times the snapshot resource extended."
::= { hh3cSnapConfigEntry 15 }
hh3cSnapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action of snapshot resource.
Note that the assocai snapshot resource can not be delete when a snapshot copy is
processing or the TimeMark is enabled, or the replication is enabled."
::= { hh3cSnapConfigEntry 16 }
-- Snap Resource Expand Table
-- This table described how to expand a snapshot resource.
hh3cSnapExpandTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cSnapExpandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to expand a snapshot resource."
::= { hh3cSnapMibObjects 3 }
hh3cSnapExpandEntry OBJECT-TYPE
SYNTAX Hh3cSnapExpandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing expand information applicable to the snapshot resource."
INDEX
{
hh3cSnapLvIndex,
hh3cSAExpRaidUuid
}
::= { hh3cSnapExpandTable 1 }
Hh3cSnapExpandEntry ::= SEQUENCE
{
hh3cSAExpRaidUuid Hh3cRaidIDType,
hh3cSAExpSize Integer32,
hh3cSAExpRaidSize Integer32,
hh3cSnapAreaExpRowStatus RowStatus
}
hh3cSAExpRaidUuid OBJECT-TYPE
SYNTAX Hh3cRaidIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is identical to hh3cRaidUuid in HH3C-RAID-MIB."
::= { hh3cSnapExpandEntry 1 }
hh3cSAExpSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the increased size for snapshot resource when
expanded. The units is million bytes. The value is always equal to
zero when read."
::= { hh3cSnapExpandEntry 2 }
hh3cSAExpRaidSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the size for snapshot resource on the raid.
The units is million bytes. The value is always equal to
zero when read."
::= { hh3cSnapExpandEntry 3 }
hh3cSnapAreaExpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the actions to expand the size for snap."
::= { hh3cSnapExpandEntry 4 }
-- Snap Resource Copy Table
-- This table described how to take a snapshot copy.
hh3cSnapCopyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cSnapCopyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity about snapshot copy."
::= { hh3cSnapMibObjects 4 }
hh3cSnapCopyEntry OBJECT-TYPE
SYNTAX Hh3cSnapCopyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing snapshot copy information applicable."
INDEX
{
hh3cSnapLvIndex
}
::= { hh3cSnapCopyTable 1 }
Hh3cSnapCopyEntry ::= SEQUENCE
{
hh3cSnapCopyLvIndex Hh3cLvIDType,
hh3cSnapCopyPercentage Integer32,
hh3cSnapCopyStartTime DateAndTime,
hh3cSnapCopySwitch INTEGER
}
hh3cSnapCopyLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the index of destination logic volume for
snapshot copy."
::= { hh3cSnapCopyEntry 1 }
hh3cSnapCopyPercentage OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the percentage of snapshot copy. The value
is equal to zero if the snapshot copy has not started. When finished,
the value is always equal to '100'."
::= { hh3cSnapCopyEntry 2 }
hh3cSnapCopyStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the time to start the snapshot copy."
::= { hh3cSnapCopyEntry 3 }
hh3cSnapCopySwitch OBJECT-TYPE
SYNTAX INTEGER
{
start(1),
stop(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the actions to start or stop the snapshot copy.
When read, the value of 'none' will be get.
Note that if the snapshot resource of source logic volume has not been
created, the action of snapshot copy will be refused by agent."
::= { hh3cSnapCopyEntry 4 }
-- TimeMark Resource Config Table
-- This table described how to config a TimeMark resource on a special logic
-- volume.
hh3cTimeMarkConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTimeMarkConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config a TimeMark on a special logic
volume."
::= { hh3cSnapMibObjects 5 }
hh3cTimeMarkConfigEntry OBJECT-TYPE
SYNTAX Hh3cTimeMarkConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing config information applicable to the TimeMark."
INDEX
{
hh3cSnapLvIndex
}
::= { hh3cTimeMarkConfigTable 1 }
Hh3cTimeMarkConfigEntry ::= SEQUENCE
{
hh3cTimeMarkCounts Integer32,
hh3cTimeMarkInitializeTime DateAndTime,
hh3cTimeMarkInterval Integer32,
hh3cTimeMarkLastTime DateAndTime,
hh3cTimeMarkTotal Integer32,
hh3cTimeMarkSwitch Hh3cStorageEnableState
}
hh3cTimeMarkCounts OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the max num of TimeMark which can be configed."
::= { hh3cTimeMarkConfigEntry 1 }
hh3cTimeMarkInitializeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the date and time when the first TimeMark
is created on the logic volume."
::= { hh3cTimeMarkConfigEntry 2 }
hh3cTimeMarkInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the interval when the TimeMark is created
automatically if the value of this object is not equal to zero.
The units is second. the min value is 10 seconds."
::= { hh3cTimeMarkConfigEntry 3 }
hh3cTimeMarkLastTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the date and time when the latest TimeMark
is created on the logic volume."
::= { hh3cTimeMarkConfigEntry 4 }
hh3cTimeMarkTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current num of TimeMark."
::= { hh3cTimeMarkConfigEntry 5 }
hh3cTimeMarkSwitch OBJECT-TYPE
SYNTAX Hh3cStorageEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes enable or disable TimeMark."
::= { hh3cTimeMarkConfigEntry 6 }
-- TimeMark Resource Create Table
-- This table described how to create a TimeMark on a special logic
-- volume.
hh3cTimeMarkCreateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTimeMarkCreateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to create a TimeMark on a special logic
volume."
::= { hh3cSnapMibObjects 6 }
hh3cTimeMarkCreateEntry OBJECT-TYPE
SYNTAX Hh3cTimeMarkCreateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing create information applicable to the TimeMark."
INDEX
{
hh3cSnapLvIndex,
hh3cTimeMarkStamp
}
::= { hh3cTimeMarkCreateTable 1 }
Hh3cTimeMarkCreateEntry ::= SEQUENCE
{
hh3cTimeMarkStamp DateAndTime,
hh3cTimeMarkComment OCTET STRING,
hh3cTimeMarkSize Integer32,
hh3cTimeMarkRowStatus RowStatus
}
hh3cTimeMarkStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the date and time the TimeMark is created."
::= { hh3cTimeMarkCreateEntry 1 }
hh3cTimeMarkComment OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the comment of the TimeMark."
::= { hh3cTimeMarkCreateEntry 2 }
hh3cTimeMarkSize OBJECT-TYPE
SYNTAX Integer32
UNITS "KB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current size of the TimeMark."
::= { hh3cTimeMarkCreateEntry 3 }
hh3cTimeMarkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to create or delete the TimeMark.
Note that the TimeMark can not be deleted if it is using."
::= { hh3cTimeMarkCreateEntry 4 }
-- TimeMark Copy Table
-- This table described how to do a TimeMark copy.
hh3cTimeMarkCopyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTimeMarkCopyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity about a TimeMark copy."
::= { hh3cSnapMibObjects 7 }
hh3cTimeMarkCopyEntry OBJECT-TYPE
SYNTAX Hh3cTimeMarkCopyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing config information applicable to the TimeMark copy."
INDEX
{
hh3cSnapLvIndex,
hh3cTimeMarkStamp
}
::= { hh3cTimeMarkCopyTable 1 }
Hh3cTimeMarkCopyEntry ::= SEQUENCE
{
hh3cTMCopyDestLvId Hh3cLvIDType,
hh3cTMCopyPercentage Integer32,
hh3cTMCopyStartTime DateAndTime,
hh3cTMCopySwitch INTEGER
}
hh3cTMCopyDestLvId OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the index of destination logic volume for
TimeMark copy."
::= { hh3cTimeMarkCopyEntry 1 }
hh3cTMCopyPercentage OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the percentage of TimeMark copy. The value
is equal to zero if the TimeMark copy has not started. When finished,
the value is always equal to '100'."
::= { hh3cTimeMarkCopyEntry 2 }
hh3cTMCopyStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the time to start the TimeMark copy."
::= { hh3cTimeMarkCopyEntry 3 }
hh3cTMCopySwitch OBJECT-TYPE
SYNTAX INTEGER
{
start(1),
stop(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the actions to start or stop the TimeMark copy.
When read, the value of 'none' will be get."
::= { hh3cTimeMarkCopyEntry 4 }
-- TimeMark Rollback Table
-- This table described how to use a TimeMark to rollback the logic volume.
hh3cTimeMarkRollbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTimeMarkRollbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to use a TimeMark to rollback the logic volume."
::= { hh3cSnapMibObjects 8 }
hh3cTimeMarkRollbackEntry OBJECT-TYPE
SYNTAX Hh3cTimeMarkRollbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing config information applicable to use a TimeMark to rollback the logic volume."
INDEX
{
hh3cSnapLvIndex,
hh3cTimeMarkStamp
}
::= { hh3cTimeMarkRollbackTable 1 }
Hh3cTimeMarkRollbackEntry ::= SEQUENCE
{
hh3cTMRollbackPercentage Integer32,
hh3cTMRollbackStartTime DateAndTime,
hh3cTMRollbackSwitch Hh3cStorageActionType
}
hh3cTMRollbackPercentage OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the percentage of rollback."
::= { hh3cTimeMarkRollbackEntry 1 }
hh3cTMRollbackStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the time to start the rollback."
::= { hh3cTimeMarkRollbackEntry 2 }
hh3cTMRollbackSwitch OBJECT-TYPE
SYNTAX Hh3cStorageActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the actions to use a TimeMark to rollback the logic volume.
Note that once you roll back, you cannot roll forward, all the later TimeMark behind it
will be deleted."
::= { hh3cTimeMarkRollbackEntry 3 }
-- Time View Table
-- This table described how to config TimeView on a special TimeMark
-- mark.
hh3cTimeViewTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTimeViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config a TimeView on a special
TimeMark."
::= { hh3cSnapMibObjects 9 }
hh3cTimeViewEntry OBJECT-TYPE
SYNTAX Hh3cTimeViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing config information applicable to the TimeView."
INDEX
{
hh3cSnapLvIndex,
hh3cTimeViewStamp
}
::= { hh3cTimeViewTable 1 }
Hh3cTimeViewEntry ::= SEQUENCE
{
hh3cTimeViewStamp DateAndTime,
hh3cTimeViewID Hh3cLvIDType,
hh3cTimeViewName OCTET STRING,
hh3cTimeViewRowStatus RowStatus
}
hh3cTimeViewStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the TimeView. The object identified by this
index is the same object as identified by the same value of
hh3cTimeMarkStamp."
::= { hh3cTimeViewEntry 1 }
hh3cTimeViewID OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the TimeView. "
::= { hh3cTimeViewEntry 2 }
hh3cTimeViewName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the name of the TimeView."
::= { hh3cTimeViewEntry 3 }
hh3cTimeViewRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the actions to create or delete the TimeView."
::= { hh3cTimeViewEntry 4 }
-- Logic Volume Replica Config Table
-- This table described how to config logic volume replica.
hh3cReplicaConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cReplicaConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config replication for a logic volume."
::= { hh3cSnapMibObjects 10 }
hh3cReplicaConfigEntry OBJECT-TYPE
SYNTAX Hh3cReplicaConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing config information applicable to the replication for a logic volume."
INDEX
{
hh3cRepLocalLvIndex
}
::= { hh3cReplicaConfigTable 1 }
Hh3cReplicaConfigEntry ::= SEQUENCE
{
hh3cRepLocalLvIndex Hh3cLvIDType,
hh3cLvRepLocalWay INTEGER,
hh3cRepLocalServerIP InetAddress,
hh3cRepLocalServerIPType InetAddressType,
hh3cRepLocalServerName OCTET STRING,
hh3cRepLocalServerUsername OCTET STRING,
hh3cRepLocalServerPassword OCTET STRING,
hh3cRepRemoteServerIP InetAddress,
hh3cRepRemoteServerIPType InetAddressType,
hh3cRepRemoteServerName OCTET STRING,
hh3cRepRemoteServerUsername OCTET STRING,
hh3cRepRemoteServerPassword OCTET STRING,
hh3cRepRemoteLvIndex Hh3cLvIDType,
hh3cReplicaMode INTEGER,
hh3cReplicaWatermark Integer32,
hh3cReplicaWatermarkRetry Integer32,
hh3cReplicaInitializeTime DateAndTime,
hh3cReplicaInterval Integer32,
hh3cReplicaEncrypt Hh3cStorageEnableState,
hh3cReplicaCompress Hh3cStorageEnableState,
hh3cReplicaUseExistTM Hh3cStorageEnableState,
hh3cReplicaProtocol INTEGER,
hh3cReplicaScanDiff TruthValue,
hh3cReplicaStatSwitch INTEGER,
hh3cReplicaRowStatus RowStatus
}
hh3cRepLocalLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the local logic volume that is related with
replication. The object identified by this index is the same object
as identified by the same value of hh3cSnapLvIndex."
::= { hh3cReplicaConfigEntry 1 }
hh3cLvRepLocalWay OBJECT-TYPE
SYNTAX INTEGER
{
outgoing(1),
incoming(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic
volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume.
The value of 'incoming' means the hh3cRepLocalLvIndex is the replica logic
volume of replication. , and the hh3cRepRemoteLvIndex is the primary logic volume."
::= { hh3cReplicaConfigEntry 2 }
hh3cRepLocalServerIP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the ip address of local server."
::= { hh3cReplicaConfigEntry 3 }
hh3cRepLocalServerIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the ip address type of local server."
::= { hh3cReplicaConfigEntry 4 }
hh3cRepLocalServerName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the name of local server."
::= { hh3cReplicaConfigEntry 5 }
hh3cRepLocalServerUsername OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the username of local server."
::= { hh3cReplicaConfigEntry 6 }
hh3cRepLocalServerPassword OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the password of local server."
::= { hh3cReplicaConfigEntry 7 }
hh3cRepRemoteServerIP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the ip address of remote server."
::= { hh3cReplicaConfigEntry 8 }
hh3cRepRemoteServerIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the ip address type of remote server."
::= { hh3cReplicaConfigEntry 9 }
hh3cRepRemoteServerName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the name of remote server."
::= { hh3cReplicaConfigEntry 10 }
hh3cRepRemoteServerUsername OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the username of remote server."
::= { hh3cReplicaConfigEntry 11 }
hh3cRepRemoteServerPassword OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the password of remote server."
::= { hh3cReplicaConfigEntry 12 }
hh3cRepRemoteLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the logic volume of remote server."
::= { hh3cReplicaConfigEntry 13 }
hh3cReplicaMode OBJECT-TYPE
SYNTAX INTEGER
{
adaptive(1),
remote(2),
none(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the replication mode:
The value of 'adaptive' means that data from the primary resource is
continuously replicated to a replica resource unless the system determines
it is not practical or possible.
The value of 'remote' means that a snapshot is taken of the primary resource at
prescribed intervals based on the criteria you set (schedule and/or watermark
value).
Note that the associated Continuous Replication Resource can not be created
if the value of this boject is not equal to 'adaptive'."
::= { hh3cReplicaConfigEntry 14 }
hh3cReplicaWatermark OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the size of watermark which means a replication is scheduled."
::= { hh3cReplicaConfigEntry 15 }
hh3cReplicaWatermarkRetry OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the 'hh3cReplicaWatermark' is set, This object identifies the interval time to
retry if the last replication is failed.
The units is minute."
::= { hh3cReplicaConfigEntry 16 }
hh3cReplicaInitializeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the time to start an initial replication."
::= { hh3cReplicaConfigEntry 17 }
hh3cReplicaInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies how often the replication should be repeated after initial
replication. The units is minute."
::= { hh3cReplicaConfigEntry 18 }
hh3cReplicaEncrypt OBJECT-TYPE
SYNTAX Hh3cStorageEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the encrypt option is enable or diable."
DEFVAL { disable }
::= { hh3cReplicaConfigEntry 19 }
hh3cReplicaCompress OBJECT-TYPE
SYNTAX Hh3cStorageEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the compress option is enable or diable."
DEFVAL { disable }
::= { hh3cReplicaConfigEntry 20 }
hh3cReplicaUseExistTM OBJECT-TYPE
SYNTAX Hh3cStorageEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies if using the exist TimeMark to replicate or not."
DEFVAL { disable }
::= { hh3cReplicaConfigEntry 21 }
hh3cReplicaProtocol OBJECT-TYPE
SYNTAX INTEGER
{
tcp(1),
rudp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the protocol about replication. The value 'tcp' means
Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol."
::= { hh3cReplicaConfigEntry 22 }
hh3cReplicaScanDiff OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the system to scan both the primary and replica resource
to determine how much data needs to be synchronized."
::= { hh3cReplicaConfigEntry 23 }
hh3cReplicaStatSwitch OBJECT-TYPE
SYNTAX INTEGER
{
promte(1),
sync(2),
scan(3),
reversal(4),
stop(5),
suspend(6),
resume(7),
none(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action how to operate the replica.
When read , a value of 'none' will be get.
The value of 'promte' means remove the replication relation and promote
the remote copy on the target server.
The value of 'sync' means synchronize mannually (force a replication that
is not scheduled.)
The value of 'scan' means scan the delta data between primary resource and
replica resource.
The value of 'reversal' means switch the roles of the primary resource and
replica resource. The replication configuration is maintained. The primary
and replica must be synchronized in order to reverse a replica.
The value of 'stop' means stop a replication that is currently in progress.
The value of 'suspend' means suspend future replications from automatically
being triggered by replication policies (watermark, interval, time). This will
not stop a replication that is currently in progress.
The value of 'resume' means resume the replication status from suspended to
normal.
Note that if the action of 'upgrade' is executed successfully, this replica
resource will become a normal logic volume, and this entry will be deleted
automatically.
Note that if the action of 'reversal' is executed successfully, Clients will
be disconnected from the former primary resource."
::= { hh3cReplicaConfigEntry 24 }
hh3cReplicaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to enable or disable the replication."
::= { hh3cReplicaConfigEntry 25 }
-- Logic Volume Replication State Table
-- This table described the replication state.
hh3cReplicaStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cReplicaStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to show replication state."
::= { hh3cSnapMibObjects 11 }
hh3cReplicaStateEntry OBJECT-TYPE
SYNTAX Hh3cReplicaStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing show information applicable to the replication state."
INDEX
{
hh3cRepLocalLvIndex
}
::= { hh3cReplicaStateTable 1 }
Hh3cReplicaStateEntry ::= SEQUENCE
{
hh3cReplicaDelta Integer32,
hh3cReplicaLastSyncTime DateAndTime,
hh3cReplicaNextSyncTime DateAndTime,
hh3cReplicaSyncTotalSize Integer32,
hh3cReplicaSyncCurPercentage Integer32,
hh3cReplicaSyncPerformance Integer32,
hh3cReplicaRunStatus INTEGER
}
hh3cReplicaDelta OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the size of delta data after last sync."
::= { hh3cReplicaStateEntry 1 }
hh3cReplicaLastSyncTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the date and time when last sync is taken."
::= { hh3cReplicaStateEntry 2 }
hh3cReplicaNextSyncTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the date and time when next sync will be
taken."
::= { hh3cReplicaStateEntry 3 }
hh3cReplicaSyncTotalSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies how much data need to be synchronized to
the replica resource for current replication."
::= { hh3cReplicaStateEntry 4 }
hh3cReplicaSyncCurPercentage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies how much data has been synchronized to the
replica resource for current replication."
::= { hh3cReplicaStateEntry 5 }
hh3cReplicaSyncPerformance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the performance of the synchronize. The unit is MB/s."
::= { hh3cReplicaStateEntry 6 }
hh3cReplicaRunStatus OBJECT-TYPE
SYNTAX INTEGER
{
suspend(1),
idle(2),
stop(3),
sync(4),
scan(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the state of the replica."
::= { hh3cReplicaStateEntry 7 }
-- Continued replication Resource Config Table
-- This table described how to config Continuous Replication Resource for a adaptive replication.
hh3cCDRConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cCDRConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config Continuous Replication Resource."
::= { hh3cSnapMibObjects 12 }
hh3cCDRConfigEntry OBJECT-TYPE
SYNTAX Hh3cCDRConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing some information applicable to Continuous Replication
Resource of the logic volume."
INDEX
{
hh3cCDRLvIndex
}
::= { hh3cCDRConfigTable 1 }
Hh3cCDRConfigEntry ::= SEQUENCE
{
hh3cCDRLvIndex Hh3cLvIDType,
hh3cCDRID Integer32,
hh3cCDRStatus Hh3cStorageOnlineState,
hh3cCDRTotalSize Integer32,
hh3cCDRFreeSize Integer32,
hh3cCDRSelectPolicy Hh3cExtendSelectPolicy,
hh3cCDRRowStatus RowStatus
}
hh3cCDRLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the source logic volume of the Continuous Replication
Resource. The object identified by this index is the same object as identified
by the same value of hh3cRepLocalLvIndex.
Note that an entry of hh3cCDRConfigTable can be created only when the associated
hh3cCDRDistributeTable's objects is ready or the associated select policy is not
equal to 'none'.
If an entry is deleted, the associated hh3cCDRDistributeTable objects should be
deleted automatically."
::= { hh3cCDRConfigEntry 1 }
hh3cCDRID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Continuous Replication Resource."
::= { hh3cCDRConfigEntry 2 }
hh3cCDRStatus OBJECT-TYPE
SYNTAX Hh3cStorageOnlineState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the state of the Continuous Replication Resource."
::= { hh3cCDRConfigEntry 3 }
hh3cCDRTotalSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the total size of the Continuous Replication Resource."
::= { hh3cCDRConfigEntry 4 }
hh3cCDRFreeSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the free size of the Continuous Replication Resource."
::= { hh3cCDRConfigEntry 5 }
hh3cCDRSelectPolicy OBJECT-TYPE
SYNTAX Hh3cExtendSelectPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the policy about allocating the space for Continuous
Replication Resource."
DEFVAL { none }
::= { hh3cCDRConfigEntry 6 }
hh3cCDRRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to create or delete the Continuous Replication
Resource."
::= { hh3cCDRConfigEntry 7 }
-- Continuous Replication Resource Distributing Table
-- This table described how to config the distribution of Continuous Replication Resource.
hh3cCDRDistributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cCDRDistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config the distribution of Continuous Replication
Resource."
::= { hh3cSnapMibObjects 13 }
hh3cCDRDistributeEntry OBJECT-TYPE
SYNTAX Hh3cCDRDistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing some information applicable to the distribution of Continuous
Replication Resource."
INDEX
{
hh3cCDRDistLvIndex,
hh3cCDRRaidUuid
}
::= { hh3cCDRDistributeTable 1 }
Hh3cCDRDistributeEntry ::= SEQUENCE
{
hh3cCDRDistLvIndex Hh3cLvIDType,
hh3cCDRRaidUuid Hh3cRaidIDType,
hh3cCDRRaidSize Integer32,
hh3cCDRExtRowStatus RowStatus
}
hh3cCDRDistLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB."
::= { hh3cCDRDistributeEntry 1 }
hh3cCDRRaidUuid OBJECT-TYPE
SYNTAX Hh3cRaidIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is identical to hh3cRaidUuid in HH3C-RAID-MIB."
::= { hh3cCDRDistributeEntry 2 }
hh3cCDRRaidSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the size on the special raid distributed
for the Continuous Replication Resource."
::= { hh3cCDRDistributeEntry 3 }
hh3cCDRExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to create the distribution
for the Continuous Replication Resource."
::= { hh3cCDRDistributeEntry 4 }
-- SafeCache Config Table
-- This table described how to config SafeCache of logic volume.
hh3cSafeCacheConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cSafeCacheConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config SafeCache."
::= { hh3cSnapMibObjects 14 }
hh3cSafeCacheConfigEntry OBJECT-TYPE
SYNTAX Hh3cSafeCacheConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing some information applicable to SafeCache of
the logic volume."
INDEX
{
hh3cSafeCacheLvIndex
}
::= { hh3cSafeCacheConfigTable 1 }
Hh3cSafeCacheConfigEntry ::= SEQUENCE
{
hh3cSafeCacheLvIndex Hh3cLvIDType,
hh3cSafeCacheID Integer32,
hh3cSafeCacheStatus Hh3cStorageOnlineState,
hh3cSafeCacheTotalSize Integer32,
hh3cSafeCacheFreeSize Integer32,
hh3cSafeCacheSelectPolicy Hh3cExtendSelectPolicy,
hh3cSafeCacheThreshold Integer32,
hh3cSafeCacheFlushTime Integer32,
hh3cSafeCacheFlushCommand Integer32,
hh3cSafeCacheSkipDupWrite INTEGER,
hh3cSafeCacheRunStatus INTEGER,
hh3cSafeCacheSwitch INTEGER,
hh3cSafeCacheRowStatus RowStatus
}
hh3cSafeCacheLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the source logic volume of the SafeCache.
The object identified by this index is the same object as identified
by the same value of hh3cLvindex.
Note that an entry of hh3cSafeCacheConfigTable can be created only when
the associated hh3cSafeCacheDistributeTable's objects is ready or the associated
select policy is not equal to 'none'.
If an entry is deleted, the associated hh3cSafeCacheDistributeTable
objects should be deleted automatically."
::= { hh3cSafeCacheConfigEntry 1 }
hh3cSafeCacheID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a SafeCache."
::= { hh3cSafeCacheConfigEntry 2 }
hh3cSafeCacheStatus OBJECT-TYPE
SYNTAX Hh3cStorageOnlineState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the state of the SafeCache."
::= { hh3cSafeCacheConfigEntry 3 }
hh3cSafeCacheTotalSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the total size of the SafeCache.
The units is million bytes."
::= { hh3cSafeCacheConfigEntry 4 }
hh3cSafeCacheFreeSize OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the free size of the SafeCache.
The units is million bytes."
::= { hh3cSafeCacheConfigEntry 5 }
hh3cSafeCacheSelectPolicy OBJECT-TYPE
SYNTAX Hh3cExtendSelectPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the policy about allocating the space for SafeCache."
DEFVAL { none }
::= { hh3cSafeCacheConfigEntry 6 }
hh3cSafeCacheThreshold OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the maximal percentage of date changed
before data flushing."
::= { hh3cSafeCacheConfigEntry 7 }
hh3cSafeCacheFlushTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the period during which the date can stay
in cache before data flushing.
The units is second."
::= { hh3cSafeCacheConfigEntry 8 }
hh3cSafeCacheFlushCommand OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the number of commands when data flushing."
::= { hh3cSafeCacheConfigEntry 9 }
hh3cSafeCacheSkipDupWrite OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies skip duplicate write commands or not."
::= { hh3cSafeCacheConfigEntry 10 }
hh3cSafeCacheRunStatus OBJECT-TYPE
SYNTAX INTEGER
{
run(1),
suspend(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the run state of the SafeCache."
::= { hh3cSafeCacheConfigEntry 11 }
hh3cSafeCacheSwitch OBJECT-TYPE
SYNTAX INTEGER
{
suspend(1),
resume(2),
none(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action of the SafeCache.
The value 'suspend' means suspend the SafeCache.
The value 'resume' means resume the SafeCache."
::= { hh3cSafeCacheConfigEntry 12 }
hh3cSafeCacheRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to create or delete the SafeCache."
::= { hh3cSafeCacheConfigEntry 13 }
-- SafeCache Resource Distributing Table
-- This table described how to config SafeCache resource of logic volume.
hh3cSafeCacheDistributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cSafeCacheDistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config the SafeCache resource."
::= { hh3cSnapMibObjects 15 }
hh3cSafeCacheDistributeEntry OBJECT-TYPE
SYNTAX Hh3cSafeCacheDistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing some information applicable to SafeCache
resource of the logic volume."
INDEX
{
hh3cSafeCacheDistLvIndex,
hh3cSafeCacheRaidUuid
}
::= { hh3cSafeCacheDistributeTable 1 }
Hh3cSafeCacheDistributeEntry ::= SEQUENCE
{
hh3cSafeCacheDistLvIndex Hh3cLvIDType,
hh3cSafeCacheRaidUuid Hh3cRaidIDType,
hh3cSafeCacheRaidSize Integer32,
hh3cSafeCacheExtRowStatus RowStatus
}
hh3cSafeCacheDistLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB."
::= { hh3cSafeCacheDistributeEntry 1 }
hh3cSafeCacheRaidUuid OBJECT-TYPE
SYNTAX Hh3cRaidIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is identical to hh3cRaidUuid in HH3C-RAID-MIB."
::= { hh3cSafeCacheDistributeEntry 2 }
hh3cSafeCacheRaidSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the size on the special raid distributed
for the SafeCache resource."
::= { hh3cSafeCacheDistributeEntry 3 }
hh3cSafeCacheExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to create the distribution
for the SafeCache resource."
::= { hh3cSafeCacheDistributeEntry 4 }
-- Logic Volume Mirror Config Table
-- This table described how to config mirror for a logic volume.
hh3cMirrorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cMirrorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config mirror."
::= { hh3cSnapMibObjects 16 }
hh3cMirrorConfigEntry OBJECT-TYPE
SYNTAX Hh3cMirrorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing some information applicable to mirror for
the logic volume."
INDEX
{
hh3cMirrorLvIndex
}
::= { hh3cMirrorConfigTable 1 }
Hh3cMirrorConfigEntry ::= SEQUENCE
{
hh3cMirrorLvIndex Hh3cLvIDType,
hh3cMirrorType INTEGER,
hh3cMirrorStatus Hh3cStorageOnlineState,
hh3cMirrorName OCTET STRING,
hh3cMirrorSyncPercentage Integer32,
hh3cMirrorSyncPerformance Integer32,
hh3cMirrorDelta Integer32,
hh3cMirrorRaidType INTEGER,
hh3cMirrorSelectPolicy Hh3cExtendSelectPolicy,
hh3cMirrorSwitch INTEGER,
hh3cMirrorExtendRaidUuid Hh3cRaidIDType,
hh3cMirrorRowStatus RowStatus
}
hh3cMirrorLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the source logic volume of the mirror.
The object identified by this index is the same object as identified
by the same value of hh3cLvindex.
Note that an entry of hh3cMirrorConfigTable can be created only when
the associated hh3cMirrorDistributeTable's objects is ready or the associated
select policy is not equal to 'none'.
If an entry is deleted, the associated hh3cMirrorDistributeTable
objects should be deleted automatically."
::= { hh3cMirrorConfigEntry 1 }
hh3cMirrorType OBJECT-TYPE
SYNTAX INTEGER
{
sync(1),
async(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the type of the mirror."
::= { hh3cMirrorConfigEntry 2 }
hh3cMirrorStatus OBJECT-TYPE
SYNTAX Hh3cStorageOnlineState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the state of the mirror resource."
::= { hh3cMirrorConfigEntry 3 }
hh3cMirrorName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the name of the mirror resource. it is used when
promote mirror resource."
::= { hh3cMirrorConfigEntry 4 }
hh3cMirrorSyncPercentage OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the percentage of the mirror sync."
::= { hh3cMirrorConfigEntry 5 }
hh3cMirrorSyncPerformance OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the performance of the mirror sync. The unit is MB/S"
::= { hh3cMirrorConfigEntry 6 }
hh3cMirrorDelta OBJECT-TYPE
SYNTAX Integer32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies size of delta data after the last
mirror sync."
::= { hh3cMirrorConfigEntry 7 }
hh3cMirrorRaidType OBJECT-TYPE
SYNTAX INTEGER
{
virtual(1),
serviceEnable(2),
none(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the raid type of the mirror resource."
::= { hh3cMirrorConfigEntry 8 }
hh3cMirrorSelectPolicy OBJECT-TYPE
SYNTAX Hh3cExtendSelectPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the policy about allocating the space
for mirror resource."
DEFVAL { none }
::= { hh3cMirrorConfigEntry 9 }
hh3cMirrorSwitch OBJECT-TYPE
SYNTAX INTEGER
{
sync(1),
swap(2),
promote(3),
none(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the state of the mirror.
The value of 'sync' means synchronize mannually.
The value of 'swap' means switch the roles of the primary resource and
mirror resource.
The value of 'promte' means break the mirrored pair and convert the mirror
resource into an independent logic volume. The new logic volume will have
all of the properties of a regular logic volume.
Note that if the action of 'promte' is executed successfully, this mirror
resource will become a primary logic volume, and this entry will be deleted
automatically."
::= { hh3cMirrorConfigEntry 10 }
hh3cMirrorExtendRaidUuid OBJECT-TYPE
SYNTAX Hh3cRaidIDType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the raid of the mirror resource when the primary
logic volume resource is extended."
::= { hh3cMirrorConfigEntry 11 }
hh3cMirrorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to create or delete the mirror resource."
::= { hh3cMirrorConfigEntry 12 }
-- Logic Volume Mirror Resource Distributing Table
-- This table described how to config mirror resource for logic volume.
hh3cMirrorDistributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cMirrorDistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains some entity to config the mirror resource."
::= { hh3cSnapMibObjects 17 }
hh3cMirrorDistributeEntry OBJECT-TYPE
SYNTAX Hh3cMirrorDistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing some information applicable to mirror
resource for the logic volume."
INDEX
{
hh3cMirrorDistLvIndex,
hh3cMirrorRaidUuid
}
::= { hh3cMirrorDistributeTable 1 }
Hh3cMirrorDistributeEntry ::= SEQUENCE
{
hh3cMirrorDistLvIndex Hh3cLvIDType,
hh3cMirrorRaidUuid Hh3cRaidIDType,
hh3cMirrorRaidSize Integer32,
hh3cMirrorExtRowStatus RowStatus
}
hh3cMirrorDistLvIndex OBJECT-TYPE
SYNTAX Hh3cLvIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB."
::= { hh3cMirrorDistributeEntry 1 }
hh3cMirrorRaidUuid OBJECT-TYPE
SYNTAX Hh3cRaidIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is identical to hh3cRaidUuid in HH3C-RAID-MIB."
::= { hh3cMirrorDistributeEntry 2 }
hh3cMirrorRaidSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the size on the special raid distributed
for the mirror resource."
::= { hh3cMirrorDistributeEntry 3 }
hh3cMirrorExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to create or delete the distribution
for the mirror resource."
::= { hh3cMirrorDistributeEntry 4 }
END
Reference in a new issue View git blame Copy permalink