Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1938 lines
72 KiB
Text
1938 lines
72 KiB
Text
CISCOSB-TIMESYNCHRONIZATION-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
switch001 FROM CISCOSB-MIB
|
|
Unsigned32, Integer32, IpAddress,
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
|
|
DisplayString, TEXTUAL-CONVENTION ,
|
|
RowStatus, TruthValue FROM SNMPv2-TC
|
|
InterfaceIndex FROM IF-MIB;
|
|
|
|
rlTimeSynchronization MODULE-IDENTITY
|
|
LAST-UPDATED "202105170000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"The MIB module describes the private MIB for SNTP & TIME definitions."
|
|
REVISION "200906180024Z"
|
|
DESCRIPTION
|
|
"Added support in DHCP timezone option."
|
|
REVISION "200709060024Z"
|
|
DESCRIPTION
|
|
"Added rlClockStatus"
|
|
REVISION "200311230024Z"
|
|
DESCRIPTION
|
|
"Initial revision"
|
|
::= { switch001 92 }
|
|
|
|
rlTimeSyncMethodMode OBJECT IDENTIFIER ::= { rlTimeSynchronization 1 }
|
|
rlSntpNtpClient OBJECT IDENTIFIER ::= { rlTimeSynchronization 2 }
|
|
|
|
rlSntpNtpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 1 }
|
|
rlSntpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 2 }
|
|
rlNtpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 3 }
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
|
|
NTPTimeStamp ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "4d.4d"
|
|
STATUS current
|
|
DESCRIPTION "NTP timestamps are represented as a 64-bit
|
|
unsigned fixed-point number, in seconds relative to
|
|
00:00 on 1 January 1900. The integer part is in the
|
|
first 32 bits and the fraction part is in the last
|
|
32 bits."
|
|
REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)',
|
|
RFC-1305, March 1992, Section 3.1"
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
|
|
NTPSignedTimeValue ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "2d.2d"
|
|
STATUS current
|
|
DESCRIPTION "The time in seconds that could represent signed
|
|
quantities like time delay with respect to some
|
|
source. This textual-convention is specific to CISCOSB
|
|
implementation of NTP where 32-bit integers are used
|
|
for such quantities. The signed integer part is in
|
|
the first 16 bits and the fraction part is in the
|
|
last 16 bits."
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
|
|
NTPStratum ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Indicates the stratum of the clock. The stratum
|
|
defines the accuracy of a time server. Higher the
|
|
stratum, lower the accuracy.
|
|
0, unspecified
|
|
1, primary reference (e.g., calibrated atomic clock,
|
|
radio clock)
|
|
2-255, secondary reference (via NTP)"
|
|
REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)',
|
|
RFC-1305, March 1992, Section 2.2"
|
|
SYNTAX Integer32 (0..255)
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Global TimeSyncMethod
|
|
-- ----------------------------------------------------------------------
|
|
|
|
RlTimeSyncMethod ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Method to be used for time synchronization in the device."
|
|
SYNTAX INTEGER { none(1),
|
|
sntp(2),
|
|
ntp(3)
|
|
}
|
|
|
|
RlDaylightSavingTimeMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - Recurring/Date/None."
|
|
SYNTAX INTEGER {
|
|
recurring(1),
|
|
date(2),
|
|
none(3)
|
|
}
|
|
|
|
rlTimeSyncMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TimeSync Mib Version."
|
|
::= { rlTimeSyncMethodMode 1 }
|
|
|
|
rndTimeSyncManagedTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time will be sent in the format hhmmss"
|
|
::= { rlTimeSyncMethodMode 2 }
|
|
|
|
rndTimeSyncManagedDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The date will be sent in the format ddmmyy"
|
|
::= { rlTimeSyncMethodMode 3 }
|
|
|
|
rndTimeSyncManagedDateTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(12))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The date and time will be sent in the format ddmmyyhhmmss"
|
|
::= { rlTimeSyncMethodMode 4 }
|
|
|
|
rlTimeSyncMethod OBJECT-TYPE
|
|
SYNTAX RlTimeSyncMethod
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Method to be used for time synchronization in the device."
|
|
DEFVAL { none }
|
|
::= { rlTimeSyncMethodMode 5 }
|
|
|
|
rlTimeZone OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Offset from Greenwich time (format [+/-]hh:mm)."
|
|
::= {rlTimeSyncMethodMode 6 }
|
|
|
|
rlTimeZoneCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Code definition for current TimeZone."
|
|
::= {rlTimeSyncMethodMode 7 }
|
|
|
|
rlDaylightSavingTimeMode OBJECT-TYPE
|
|
SYNTAX RlDaylightSavingTimeMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - Recurring/Date/None."
|
|
DEFVAL { none }
|
|
::= { rlTimeSyncMethodMode 8 }
|
|
|
|
rlDaylightSavingTimeStart OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time start date.
|
|
In recurring mode (format 1): week wday month hh:mm
|
|
In recurring mode (format 2): RJul n hh:mm
|
|
In date mode: month day year hh:mm
|
|
week: 0-6 (0=First, 6=Last)
|
|
wday: 1-7 (Sunday-Saturday)
|
|
month: 1-12 (January-December)
|
|
day: 1-31
|
|
year: 0-99 (2000-2099)
|
|
hh: 0-23 (hours)
|
|
mm: 0-59 (minutes)
|
|
n: 0-365 (zero-based Julian day of the year. Leap days shall be
|
|
counted, and it is possible to refer to February 29).
|
|
Format 2 for recurring mode is used only in the dynamic entry and
|
|
should not be used in the static entry (with index 1)."
|
|
::= { rlTimeSyncMethodMode 9 }
|
|
|
|
rlDaylightSavingTimeEnd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time start date.
|
|
In recurring mode (format 1): week wday month hh:mm
|
|
In recurring mode (format 2): RJul n hh:mm
|
|
In date mode: month day year hh:mm
|
|
week: 0-6 (0=First, 6=Last)
|
|
wday: 1-7 (Sunday-Saturday)
|
|
month: 1-12 (January-December)
|
|
day: 1-31
|
|
year: 0-99 (2000-2099)
|
|
hh: 0-23 (hours)
|
|
mm: 0-59 (minutes)
|
|
n: 0-365 (zero-based Julian day of the year. Leap days shall be
|
|
counted, and it is possible to refer to February 29).
|
|
Format 2 for recurring mode is used only in the dynamic entry and
|
|
should not be used in the static entry (with index 1)."
|
|
::= { rlTimeSyncMethodMode 10 }
|
|
|
|
rlDaylightSavingTimeOffset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - The number of minutes to add to
|
|
the clock during summer time."
|
|
DEFVAL { 60 }
|
|
::= { rlTimeSyncMethodMode 11 }
|
|
|
|
rlDaylightSavingTimeCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Code definition for current Daylight Saving Time."
|
|
::= {rlTimeSyncMethodMode 12 }
|
|
|
|
rlTZDSTOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Local Time Zone and Daylight Saving Time offset
|
|
in seconds."
|
|
::= { rlTimeSyncMethodMode 13 }
|
|
|
|
rlTimeZoneName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Human readable string describing Local Time Zone and Daylight Saving Time."
|
|
::= {rlTimeSyncMethodMode 14 }
|
|
|
|
|
|
|
|
--
|
|
-- TimeZone table
|
|
--
|
|
|
|
-- TimeZone table aimed to replace next mibs:
|
|
-- rlTimeSyncMethod
|
|
-- rlTimeZone
|
|
-- rlTimeZoneCode
|
|
-- rlDaylightSavingTimeMode
|
|
-- rlDaylightSavingTimeStart
|
|
-- rlDaylightSavingTimeEnd
|
|
-- rlDaylightSavingTimeOffset
|
|
-- rlDaylightSavingTimeCode
|
|
-- rlTZDSTOffset
|
|
-- rlTimeZoneName
|
|
-- Table consist of one entry (with index = 1) and each field corresponding
|
|
-- to one of this MIB scalars, holding Timezone and Summertime static information.
|
|
-- In case DHCP timezone option is supported, the table will contain another row,
|
|
-- with index = 2, that will contain dynamic values for Timezone and Summertime
|
|
-- received through DHCP.
|
|
|
|
rlTimeZoneTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlTimeZoneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "TimeZone information."
|
|
::= { rlTimeSyncMethodMode 15 }
|
|
|
|
rlTimeZoneEntry OBJECT-TYPE
|
|
SYNTAX RlTimeZoneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX { rlTimeZoneIndex }
|
|
::= { rlTimeZoneTable 1 }
|
|
|
|
RlTimeZoneEntry ::= SEQUENCE {
|
|
rlTimeZoneIndex INTEGER,
|
|
rlTimeZoneTimeSyncMethod RlTimeSyncMethod,
|
|
rlTimeZoneTimeZoneOffset DisplayString (SIZE(1..6)),
|
|
rlTimeZoneTimeZoneCode DisplayString (SIZE(0..16)),
|
|
rlTimeZoneDaylightSavingTimeMode RlDaylightSavingTimeMode,
|
|
rlTimeZoneDaylightSavingTimeStart OCTET STRING (SIZE(14)),
|
|
rlTimeZoneDaylightSavingTimeEnd OCTET STRING (SIZE(14)),
|
|
rlTimeZoneDaylightSavingTimeOffset Integer32,
|
|
rlTimeZoneDaylightSavingTimeCode DisplayString (SIZE(0..16)),
|
|
rlTimeZoneTZDSTOffset INTEGER,
|
|
rlTimeZoneTimeZoneName DisplayString (SIZE(0..16)),
|
|
rlTimeZoneDataType INTEGER,
|
|
rlTimeZoneDataSourceIfIndex INTEGER,
|
|
rlTimeZoneDataDynamicConfSource INTEGER
|
|
}
|
|
|
|
rlTimeZoneIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry index. A row with index 2 will be existing in case the DHCP
|
|
timezone is supported, and will contain Timezone and Summertime dynamic
|
|
values.
|
|
Using index 2 in SET operations is allowed only for SNMP
|
|
inner clients (SNMPServ users), on condition that DHCP timezone option
|
|
is supported."
|
|
::= { rlTimeZoneEntry 1 }
|
|
|
|
rlTimeZoneTimeSyncMethod OBJECT-TYPE
|
|
SYNTAX RlTimeSyncMethod
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Method to be used for time synchronization in the device."
|
|
DEFVAL { none }
|
|
::= { rlTimeZoneEntry 2 }
|
|
|
|
rlTimeZoneTimeZoneOffset OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Offset from Greenwich time (format [+/-]hh:mm)."
|
|
::= { rlTimeZoneEntry 3 }
|
|
|
|
rlTimeZoneTimeZoneCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Code definition for current TimeZone."
|
|
::= { rlTimeZoneEntry 4 }
|
|
|
|
rlTimeZoneDaylightSavingTimeMode OBJECT-TYPE
|
|
SYNTAX RlDaylightSavingTimeMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - Recurring/Date/None."
|
|
DEFVAL { none }
|
|
::= { rlTimeZoneEntry 5 }
|
|
|
|
rlTimeZoneDaylightSavingTimeStart OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time start date.
|
|
In recurring mode (format 1): week wday month hh:mm
|
|
In recurring mode (format 2): RJul n hh:mm
|
|
In date mode: month day year hh:mm
|
|
week: 0-6 (0=First, 6=Last)
|
|
wday: 1-7 (Sunday-Saturday)
|
|
month: 1-12 (January-December)
|
|
day: 1-31
|
|
year: 0-99 (2000-2099)
|
|
hh: 0-23 (hours)
|
|
mm: 0-59 (minutes)
|
|
n: 0-365 (zero-based Julian day of the year. Leap days shall be
|
|
counted, and it is possible to refer to February 29).
|
|
Format 2 for recurring mode is used only in the dynamic entry and
|
|
should not be used in the static entry (with index 1)."
|
|
::= { rlTimeZoneEntry 6 }
|
|
|
|
rlTimeZoneDaylightSavingTimeEnd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time start date.
|
|
In recurring mode (format 1): week wday month hh:mm
|
|
In recurring mode (format 2): RJul n hh:mm
|
|
In date mode: month day year hh:mm
|
|
week: 0-6 (0=First, 6=Last)
|
|
wday: 1-7 (Sunday-Saturday)
|
|
month: 1-12 (January-December)
|
|
day: 1-31
|
|
year: 0-99 (2000-2099)
|
|
hh: 0-23 (hours)
|
|
mm: 0-59 (minutes)
|
|
n: 0-365 (zero-based Julian day of the year. Leap days shall be
|
|
counted, and it is possible to refer to February 29).
|
|
Format 2 for recurring mode is used only in the dynamic entry and
|
|
should not be used in the static entry (with index 1)."
|
|
::= { rlTimeZoneEntry 7 }
|
|
|
|
rlTimeZoneDaylightSavingTimeOffset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Daylight Saving Time - The number of minutes to add to
|
|
the clock during summer time."
|
|
DEFVAL { 60 }
|
|
::= { rlTimeZoneEntry 8 }
|
|
|
|
rlTimeZoneDaylightSavingTimeCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Code definition for current Daylight Saving Time."
|
|
::= { rlTimeZoneEntry 9 }
|
|
|
|
rlTimeZoneTZDSTOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Local Time Zone and Daylight Saving Time offset in seconds."
|
|
::= { rlTimeZoneEntry 10 }
|
|
|
|
rlTimeZoneTimeZoneName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Human readable string describing Local Time Zone and Daylight Saving Time."
|
|
::= { rlTimeZoneEntry 11 }
|
|
|
|
rlTimeZoneDataType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dynamic(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of data in this entry: static or dynamic."
|
|
DEFVAL { static }
|
|
::= { rlTimeZoneEntry 12 }
|
|
|
|
rlTimeZoneDataSourceIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IfIndex of the interface through which the dynamic data of this row has been learned.
|
|
The value of this field will be 0 if rlTimeZoneTimeDataType is static (since it is
|
|
relevant only for dynamic entry), and this is the only value allowed for SET in this case."
|
|
DEFVAL { 0 }
|
|
::= { rlTimeZoneEntry 13 }
|
|
|
|
rlTimeZoneDataDynamicConfSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
dhcpv4(2),
|
|
dhcpv6(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The source of dynamic data in this entry, for example: dhcpv4.
|
|
Values other than 'none' are relevant only for dynamic entry."
|
|
DEFVAL { none }
|
|
::= { rlTimeZoneEntry 14 }
|
|
|
|
|
|
rlClockStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
manuallySet(2),
|
|
synchronizedBySntp(3),
|
|
setByRtc(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current status of the clock. The value 'invalid' means time is meaninglesss,
|
|
since it has not been manually configured, or achieved as a result
|
|
of SNTP synchronization or set by RTC."
|
|
::= {rlTimeSyncMethodMode 16 }
|
|
|
|
rlDhcpTimezoneOptionEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies whether the DHCP Timezone option (DHCPv4 option 100) is supported in the system.
|
|
Setting this value to FALSE, will clear Timezone and Summertime dynamic configuration,
|
|
so that:
|
|
1) rlTimeZoneTimeZoneCode and rlTimeZoneDaylightSavingTimeCode length will
|
|
be 0 for rlTimeZoneEntry whose index = 2 (dynamic entry).
|
|
2) the operative values of Timezone and Summertime will be those
|
|
statically configured. Thus, GET operations on the following
|
|
MIB scalars will result is static values:
|
|
rlTimeZone, rlTimeZoneCode, rlDaylightSavingTimeMode,
|
|
rlDaylightSavingTimeStart, rlDaylightSavingTimeEnd, rlDaylightSavingTimeOffset,
|
|
rlDaylightSavingTimeCode, rlTZDSTOffset."
|
|
::= {rlTimeSyncMethodMode 17 }
|
|
|
|
rlAutomaticClockSetFromPCEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies whether automatic set of time and date is permitted from
|
|
connected host PC.
|
|
The feature is meant to be used in order to initialize the clock
|
|
after reboot (if SNTP is not in use), since the device does not have
|
|
a realtime clock."
|
|
DEFVAL { false }
|
|
::= {rlTimeSyncMethodMode 18 }
|
|
|
|
rlTimeAndDateHaveBeenSet OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether the time and date have been set in the
|
|
device, manually or through SNTP synchronization.
|
|
If only time has been set, the value of this MIB will
|
|
be FALSE. If only date has been set, the value of this MIB
|
|
will be FALSE."
|
|
::= {rlTimeSyncMethodMode 19 }
|
|
|
|
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- SNTP/NTP client configuration parameters
|
|
-- ----------------------------------------------------------------------
|
|
|
|
RlSntpNtpSyncType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Method to be used for time synchronization in the device."
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
unicast(2),
|
|
anycast(3),
|
|
broadcast(4)
|
|
}
|
|
|
|
RlSntpNtpSyncEntryType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Entry in rlSntpNtpConfigSrvTable."
|
|
SYNTAX INTEGER {
|
|
primaryPollSrv(1),
|
|
syncSrv(2)
|
|
}
|
|
|
|
rlSntpNtpMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SntpNtp Mib Version."
|
|
::= { rlSntpNtpConfig 1 }
|
|
|
|
rlSntpNtpConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
unicast(2),
|
|
anycast(3),
|
|
multicast(4),
|
|
unicastAnycast(5),
|
|
unicastMulticast(6),
|
|
anycastMulticast(7),
|
|
unicastAnycastMulticast(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current configuration operational mode of SNTP/NTP client."
|
|
DEFVAL { none }
|
|
::= { rlSntpNtpConfig 2 }
|
|
|
|
rlSntpNtpConfigSysStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of the local clock. If the value is set
|
|
to 1, i.e., this is a primary reference, then the
|
|
Primary-Clock procedure described in Section 3.4.6,
|
|
in RFC-1305 is invoked."
|
|
::= { rlSntpNtpConfig 3 }
|
|
|
|
rlSntpNtpConfigPollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Period of time (in seconds) between succesive attempts to
|
|
perform an update via SNTP."
|
|
DEFVAL { 1024 }
|
|
::= { rlSntpNtpConfig 4 }
|
|
|
|
rlSntpNtpConfigPrimaryPollSrvAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of a trusted SNTP server for polling."
|
|
::= { rlSntpNtpConfig 5 }
|
|
|
|
rlSntpNtpConfigPrimaryPollSrvMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mrid of the primary server."
|
|
::= { rlSntpNtpConfig 6 }
|
|
|
|
rlSntpNtpConfigPrimaryPollSrvIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed of the primary server."
|
|
::= { rlSntpNtpConfig 7 }
|
|
|
|
rlSntpNtpConfigPrimaryPollSrvStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of the primary polling server."
|
|
::= { rlSntpNtpConfig 8 }
|
|
|
|
rlSntpNtpConfigSyncSrvAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of the synced server."
|
|
::= { rlSntpNtpConfig 9 }
|
|
|
|
rlSntpNtpConfigSyncSrvMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mrid of the synced server."
|
|
::= { rlSntpNtpConfig 10 }
|
|
|
|
rlSntpNtpConfigSyncSrvIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed of the synced server."
|
|
::= { rlSntpNtpConfig 11 }
|
|
|
|
rlSntpNtpConfigSyncSrvType OBJECT-TYPE
|
|
SYNTAX RlSntpNtpSyncType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Synced server type."
|
|
DEFVAL { none }
|
|
::= { rlSntpNtpConfig 12 }
|
|
|
|
|
|
rlSntpNtpConfigSyncSrvStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of the synced server."
|
|
::= { rlSntpNtpConfig 13 }
|
|
|
|
rlSntpNtpConfigRetryTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP/NTP requests Retry Interval."
|
|
::= { rlSntpNtpConfig 14 }
|
|
|
|
rlSntpNtpConfigRetryCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP/NTP requests Retry Count."
|
|
::= { rlSntpNtpConfig 15 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- SNTP Config Servers
|
|
-- ----------------------------------------------------------------------
|
|
|
|
-- Will replace next MIBs:
|
|
|
|
-- rlSntpNtpConfigPrimaryPollSrvAddr
|
|
-- rlSntpNtpConfigPrimaryPollSrvMrid
|
|
-- rlSntpNtpConfigPrimaryPollSrvIfIndex
|
|
-- rlSntpNtpConfigPrimaryPollSrvStratum
|
|
|
|
-- rlSntpNtpConfigSyncSrvAddr
|
|
-- rlSntpNtpConfigSyncSrvMrid
|
|
-- rlSntpNtpConfigSyncSrvIfIndex
|
|
-- rlSntpNtpConfigSyncSrvType
|
|
-- rlSntpNtpConfigSyncSrvStratum
|
|
|
|
rlSntpNtpConfigSrvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpNtpConfigSrvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information about config servers."
|
|
::= { rlSntpNtpConfig 16 }
|
|
|
|
rlSntpNtpConfigSrvEntry OBJECT-TYPE
|
|
SYNTAX RlSntpNtpConfigSrvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry in rlSntpNtpConfigSrvTable."
|
|
INDEX { rlSntpNtpConfigSrvEntryType }
|
|
::= { rlSntpNtpConfigSrvTable 1 }
|
|
|
|
RlSntpNtpConfigSrvEntry ::=
|
|
SEQUENCE {
|
|
rlSntpNtpConfigSrvEntryType RlSntpNtpSyncEntryType,
|
|
rlSntpNtpConfigSrvInetAddressType InetAddressType,
|
|
rlSntpNtpConfigSrvInetAddress InetAddress,
|
|
rlSntpNtpConfigSrvMrid INTEGER,
|
|
rlSntpNtpConfigSrvIfIndex INTEGER,
|
|
rlSntpNtpConfigSrvSyncType RlSntpNtpSyncType,
|
|
rlSntpNtpConfigSrvStratum NTPStratum
|
|
}
|
|
|
|
rlSntpNtpConfigSrvEntryType OBJECT-TYPE
|
|
SYNTAX RlSntpNtpSyncEntryType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Server type: Synchronize Server or Primary Poll Server."
|
|
::= { rlSntpNtpConfigSrvEntry 1 }
|
|
|
|
rlSntpNtpConfigSrvInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Server inet address type."
|
|
::= { rlSntpNtpConfigSrvEntry 2 }
|
|
|
|
rlSntpNtpConfigSrvInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Server inet address."
|
|
::= { rlSntpNtpConfigSrvEntry 3 }
|
|
|
|
rlSntpNtpConfigSrvMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mrid of the server."
|
|
::= { rlSntpNtpConfigSrvEntry 4 }
|
|
|
|
rlSntpNtpConfigSrvIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed of the server."
|
|
::= { rlSntpNtpConfigSrvEntry 5 }
|
|
|
|
rlSntpNtpConfigSrvSyncType OBJECT-TYPE
|
|
SYNTAX RlSntpNtpSyncType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of synchronization."
|
|
::= { rlSntpNtpConfigSrvEntry 6 }
|
|
|
|
rlSntpNtpConfigSrvStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of the synced server."
|
|
::= { rlSntpNtpConfigSrvEntry 7 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- SNTP client configuration parameters
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpClientMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
active(2),
|
|
passive(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current operational mode of SNTP client."
|
|
DEFVAL { none }
|
|
::= { rlSntpConfig 1 }
|
|
|
|
rlSntpUnicastAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Unicast Administrative state - Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpConfig 2 }
|
|
|
|
rlSntpBroadcastAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
ipv4OnlyEnabled(3),
|
|
ipv6OnlyEnabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast Administrative state - Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpConfig 3 }
|
|
|
|
rlSntpAnycastAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
ipv4OnlyEnabled(3),
|
|
ipv6OnlyEnabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast Administrative state - Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpConfig 4 }
|
|
|
|
rlSntpUnicastPollState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Unicast poll state - TRUE for polled."
|
|
DEFVAL { false }
|
|
::= { rlSntpConfig 5 }
|
|
|
|
rlSntpBroadcastPollState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast poll state - TRUE for polled."
|
|
DEFVAL { false }
|
|
::= { rlSntpConfig 6 }
|
|
|
|
rlSntpAnycastPollState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast poll state - TRUE for polled."
|
|
DEFVAL { false }
|
|
::= { rlSntpConfig 7 }
|
|
|
|
rlSntpAuthenticationState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP authentication state- Enable/Disable SNTP."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpConfig 8 }
|
|
|
|
rlTimeValidFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Is time valid."
|
|
DEFVAL { false }
|
|
::= { rlSntpConfig 9 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Table for configuring Interfaces (Broadcast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigBroadcastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpBroadcastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing broadcast mode information per
|
|
interface."
|
|
::= { rlSntpConfig 10 }
|
|
|
|
rlSntpBroadcastEntry OBJECT-TYPE
|
|
SYNTAX RlSntpBroadcastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Private paramters for interface:
|
|
sntp status, broadcast mode."
|
|
INDEX { rlSntpBroadcastIfIndex }
|
|
::= { rlSntpConfigBroadcastTable 1 }
|
|
|
|
RlSntpBroadcastEntry ::=
|
|
SEQUENCE {
|
|
rlSntpBroadcastIfIndex INTEGER,
|
|
rlSntpBroadcastIfAdminState INTEGER,
|
|
rlSntpBroadcastMode INTEGER,
|
|
rlSntpBroadcastPolled TruthValue,
|
|
rlSntpBroadcastAddress IpAddress,
|
|
rlSntpBroadcastStratum NTPStratum,
|
|
rlSntpBroadcastLastResp NTPTimeStamp,
|
|
rlSntpBroadcastStatus INTEGER,
|
|
rlSntpBroadcastOffset NTPTimeStamp,
|
|
rlSntpBroadcastDelay NTPSignedTimeValue,
|
|
rlSntpBroadcastRowStatus RowStatus
|
|
}
|
|
|
|
rlSntpBroadcastIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed by this entry."
|
|
::= {rlSntpBroadcastEntry 1}
|
|
|
|
rlSntpBroadcastIfAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP interface Adminstrative state- Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpBroadcastEntry 2 }
|
|
|
|
rlSntpBroadcastMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
receive(2),
|
|
send(3),
|
|
receiveSend(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP/NTP Broadcast Mode.
|
|
none - no broadcast SNTP packets are received or sent.
|
|
Receive - host only receive SNTP packets that were sent
|
|
to broadcast address (were not directed to
|
|
the host). This is multicast mode in the RFC.
|
|
Send - host only send SNTP packets and wait for replies
|
|
directed to the host. This is anycast mode in
|
|
the RFC.
|
|
ReceiveSend - host receive broadcast messages (destination
|
|
is broadcast address in the received messages)
|
|
and send SNTP packets to wait for replies
|
|
directed to the host (destination address
|
|
of the reply is the host address). This mode
|
|
combines anycast and multicast modes in the
|
|
RFC."
|
|
DEFVAL { receiveSend }
|
|
::= { rlSntpBroadcastEntry 3 }
|
|
|
|
rlSntpBroadcastPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpBroadcastEntry 4 }
|
|
|
|
rlSntpBroadcastAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of a trusted SNTP server."
|
|
::= { rlSntpBroadcastEntry 5 }
|
|
|
|
rlSntpBroadcastStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpBroadcastEntry 6 }
|
|
|
|
rlSntpBroadcastLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast Last Response Time"
|
|
::= { rlSntpBroadcastEntry 7 }
|
|
|
|
rlSntpBroadcastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Broadcast.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpBroadcastEntry 8 }
|
|
|
|
rlSntpBroadcastOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpBroadcastEntry 9 }
|
|
|
|
rlSntpBroadcastDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpBroadcastEntry 10 }
|
|
|
|
rlSntpBroadcastRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP broadcast interface
|
|
information."
|
|
::= { rlSntpBroadcastEntry 11 }
|
|
|
|
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Table for configuring Interfaces (Anycast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigAnycastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpAnycastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing anycast information per
|
|
interface."
|
|
::= { rlSntpConfig 11 }
|
|
|
|
rlSntpAnycastEntry OBJECT-TYPE
|
|
SYNTAX RlSntpAnycastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Private paramters for interface:
|
|
server info."
|
|
INDEX { rlSntpAnycastIfIndex }
|
|
::= { rlSntpConfigAnycastTable 1 }
|
|
|
|
RlSntpAnycastEntry ::=
|
|
SEQUENCE {
|
|
rlSntpAnycastIfIndex INTEGER,
|
|
rlSntpAnycastAddress IpAddress,
|
|
rlSntpAnycastStratum NTPStratum,
|
|
rlSntpAnycastLastResp NTPTimeStamp,
|
|
rlSntpAnycastStatus INTEGER,
|
|
rlSntpAnycastOffset NTPTimeStamp,
|
|
rlSntpAnycastDelay NTPSignedTimeValue,
|
|
rlSntpAnycastRowStatus RowStatus
|
|
}
|
|
|
|
rlSntpAnycastIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed by this entry."
|
|
::= {rlSntpAnycastEntry 1}
|
|
|
|
rlSntpAnycastAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of a trusted SNTP server."
|
|
::= { rlSntpAnycastEntry 2 }
|
|
|
|
rlSntpAnycastStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpAnycastEntry 3 }
|
|
|
|
rlSntpAnycastLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast Last Response Time"
|
|
::= { rlSntpAnycastEntry 4 }
|
|
|
|
rlSntpAnycastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Anycast.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpAnycastEntry 5 }
|
|
|
|
rlSntpAnycastOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAnycastEntry 6 }
|
|
|
|
rlSntpAnycastDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAnycastEntry 7 }
|
|
|
|
rlSntpAnycastRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP anycast interface
|
|
information."
|
|
::= { rlSntpAnycastEntry 8 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Table for configuring Servers (Unicast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing trusted SNTP servers to be queried in
|
|
unicast or broadcast mode."
|
|
::= { rlSntpConfig 12 }
|
|
|
|
rlSntpServerEntry OBJECT-TYPE
|
|
SYNTAX RlSntpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A trusted server."
|
|
INDEX { rlSntpServerAddress }
|
|
::= { rlSntpConfigServerTable 1 }
|
|
|
|
RlSntpServerEntry ::=
|
|
SEQUENCE {
|
|
rlSntpServerAddress IpAddress,
|
|
rlSntpServerPolled TruthValue,
|
|
rlSntpServerStratum NTPStratum,
|
|
rlSntpServerLastResp NTPTimeStamp,
|
|
rlSntpServerStatus INTEGER,
|
|
rlSntpServersOffset NTPTimeStamp,
|
|
rlSntpServersDelay NTPSignedTimeValue,
|
|
rlSntpServersKeyIdentifier Unsigned32,
|
|
rlSntpServerRowStatus RowStatus
|
|
}
|
|
|
|
rlSntpServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip Address of a trusted SNTP server."
|
|
::= { rlSntpServerEntry 1 }
|
|
|
|
rlSntpServerPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpServerEntry 2 }
|
|
|
|
rlSntpServerStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpServerEntry 3 }
|
|
|
|
rlSntpServerLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Response Time"
|
|
::= { rlSntpServerEntry 4 }
|
|
|
|
rlSntpServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Server.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpServerEntry 5 }
|
|
|
|
rlSntpServersOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpServerEntry 6 }
|
|
|
|
rlSntpServersDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpServerEntry 7 }
|
|
|
|
rlSntpServersKeyIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key identifier. The valid range is
|
|
1-4294967295.
|
|
Value zero, means no authentication is being done."
|
|
::= { rlSntpServerEntry 8 }
|
|
|
|
rlSntpServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP server information."
|
|
::= { rlSntpServerEntry 9 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- Table for configuring authentication keys
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table authentication keys."
|
|
::= { rlSntpConfig 13 }
|
|
|
|
rlSntpAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX RlSntpAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Keys information for authenticationof NTP packets."
|
|
INDEX { rlSntpAuthenticationKeyID }
|
|
::= { rlSntpConfigAuthenticationTable 1 }
|
|
|
|
RlSntpAuthenticationEntry ::=
|
|
SEQUENCE {
|
|
rlSntpAuthenticationKeyID Unsigned32 (1..4294967295),
|
|
rlSntpAuthenticationKeyValue DisplayString,
|
|
rlSntpAuthenticationKeyState INTEGER,
|
|
rlSntpAuthenticationRowStatus RowStatus
|
|
}
|
|
|
|
rlSntpAuthenticationKeyID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The key identifier. Valid rabge for key identifier
|
|
is 1-4294967295."
|
|
::= {rlSntpAuthenticationEntry 1}
|
|
|
|
rlSntpAuthenticationKeyValue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key value."
|
|
::= { rlSntpAuthenticationEntry 2 }
|
|
|
|
rlSntpAuthenticationKeyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key state - Enable/Disable key."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpAuthenticationEntry 3 }
|
|
|
|
rlSntpAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this Authentication key information."
|
|
::= { rlSntpAuthenticationEntry 4 }
|
|
|
|
rlSntpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1.. 65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User defined SNTP port."
|
|
DEFVAL { 123 }
|
|
::= { rlSntpConfig 14 }
|
|
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- IPv6 Support
|
|
-- ----------------------------------------------------------------------
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- IPv6: Table for configuring Interfaces (Broadcast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigBroadcastInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpBroadcastInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing broadcast mode information per
|
|
interface."
|
|
::= { rlSntpConfig 15 }
|
|
|
|
rlSntpBroadcastInetEntry OBJECT-TYPE
|
|
SYNTAX RlSntpBroadcastInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Private paramters for interface:
|
|
sntp status, broadcast mode."
|
|
INDEX { rlSntpBroadcastInetIfIndex }
|
|
::= { rlSntpConfigBroadcastInetTable 1 }
|
|
|
|
RlSntpBroadcastInetEntry ::=
|
|
SEQUENCE {
|
|
rlSntpBroadcastInetIfIndex INTEGER,
|
|
rlSntpBroadcastInetIfAdminState INTEGER,
|
|
rlSntpBroadcastInetMode INTEGER,
|
|
rlSntpBroadcastInetPolled TruthValue,
|
|
rlSntpBroadcastInetAddressType InetAddressType,
|
|
rlSntpBroadcastInetAddress InetAddress,
|
|
rlSntpBroadcastInetStratum NTPStratum,
|
|
rlSntpBroadcastInetLastResp NTPTimeStamp,
|
|
rlSntpBroadcastInetStatus INTEGER,
|
|
rlSntpBroadcastInetOffset NTPTimeStamp,
|
|
rlSntpBroadcastInetDelay NTPSignedTimeValue,
|
|
rlSntpBroadcastInetRowStatus RowStatus,
|
|
rlSntpBroadcastInetLastReq NTPTimeStamp
|
|
}
|
|
|
|
rlSntpBroadcastInetIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed by this entry."
|
|
::= {rlSntpBroadcastInetEntry 1}
|
|
|
|
rlSntpBroadcastInetIfAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP interface Adminstrative state- Enable/Disable SNTP.
|
|
In case of reinitializing polling or time
|
|
synchronization this MIB is modified. The MIB can
|
|
be enabled even thought it is already enabled."
|
|
DEFVAL { disabled }
|
|
::= { rlSntpBroadcastInetEntry 2 }
|
|
|
|
rlSntpBroadcastInetMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
receive(2),
|
|
send(3),
|
|
receiveSend(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SNTP/NTP Broadcast Mode.
|
|
none - no broadcast SNTP packets are received or sent.
|
|
Receive - host only receive SNTP packets that were sent
|
|
to broadcast address (were not directed to
|
|
the host). This is multicast mode in the RFC.
|
|
Send - host only send SNTP packets and wait for replies
|
|
directed to the host. This is anycast mode in
|
|
the RFC.
|
|
ReceiveSend - host receive broadcast messages (destination
|
|
is broadcast address in the received messages)
|
|
and send SNTP packets to wait for replies
|
|
directed to the host (destination address
|
|
of the reply is the host address). This mode
|
|
combines anycast and multicast modes in the
|
|
RFC."
|
|
DEFVAL { receiveSend }
|
|
::= { rlSntpBroadcastInetEntry 3 }
|
|
|
|
rlSntpBroadcastInetPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpBroadcastInetEntry 4 }
|
|
|
|
rlSntpBroadcastInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inet Address Type of a trusted SNTP server."
|
|
::= { rlSntpBroadcastInetEntry 5 }
|
|
|
|
rlSntpBroadcastInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inet Address of a trusted SNTP server."
|
|
::= { rlSntpBroadcastInetEntry 6 }
|
|
|
|
rlSntpBroadcastInetStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpBroadcastInetEntry 7 }
|
|
|
|
rlSntpBroadcastInetLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast Last Response Time"
|
|
::= { rlSntpBroadcastInetEntry 8 }
|
|
|
|
rlSntpBroadcastInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Broadcast.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpBroadcastInetEntry 9 }
|
|
|
|
rlSntpBroadcastInetOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpBroadcastInetEntry 10 }
|
|
|
|
rlSntpBroadcastInetDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpBroadcastInetEntry 11 }
|
|
|
|
rlSntpBroadcastInetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP broadcast interface
|
|
information."
|
|
::= { rlSntpBroadcastInetEntry 12 }
|
|
|
|
rlSntpBroadcastInetLastReq OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Broadcast Last Request Time"
|
|
::= { rlSntpBroadcastInetEntry 13 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- IPv6: Table for configuring Interfaces (Anycast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigAnycastInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpAnycastInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing anycast information per
|
|
interface."
|
|
::= { rlSntpConfig 16 }
|
|
|
|
rlSntpAnycastInetEntry OBJECT-TYPE
|
|
SYNTAX RlSntpAnycastInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Private paramters for interface:
|
|
server info."
|
|
INDEX { rlSntpAnycastInetIfIndex }
|
|
::= { rlSntpConfigAnycastInetTable 1 }
|
|
|
|
RlSntpAnycastInetEntry ::=
|
|
SEQUENCE {
|
|
rlSntpAnycastInetIfIndex INTEGER,
|
|
rlSntpAnycastInetAddressType InetAddressType,
|
|
rlSntpAnycastInetAddress InetAddress,
|
|
rlSntpAnycastInetStratum NTPStratum,
|
|
rlSntpAnycastInetLastResp NTPTimeStamp,
|
|
rlSntpAnycastInetStatus INTEGER,
|
|
rlSntpAnycastInetOffset NTPTimeStamp,
|
|
rlSntpAnycastInetDelay NTPSignedTimeValue,
|
|
rlSntpAnycastInetRowStatus RowStatus,
|
|
rlSntpAnycastInetLastReq NTPTimeStamp
|
|
}
|
|
|
|
rlSntpAnycastInetIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface addressed by this entry."
|
|
::= {rlSntpAnycastInetEntry 1}
|
|
|
|
rlSntpAnycastInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inet Address Type of a trusted SNTP server."
|
|
::= { rlSntpAnycastInetEntry 2 }
|
|
|
|
rlSntpAnycastInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inet Address of a trusted SNTP server."
|
|
::= { rlSntpAnycastInetEntry 3 }
|
|
|
|
rlSntpAnycastInetStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpAnycastInetEntry 4 }
|
|
|
|
rlSntpAnycastInetLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast Last Response Time"
|
|
::= { rlSntpAnycastInetEntry 5 }
|
|
|
|
rlSntpAnycastInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Anycast.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpAnycastInetEntry 6 }
|
|
|
|
rlSntpAnycastInetOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAnycastInetEntry 7 }
|
|
|
|
rlSntpAnycastInetDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAnycastInetEntry 8 }
|
|
|
|
rlSntpAnycastInetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP anycast interface
|
|
information."
|
|
::= { rlSntpAnycastInetEntry 9 }
|
|
|
|
rlSntpAnycastInetLastReq OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Anycast Last Request Time"
|
|
::= { rlSntpAnycastInetEntry 10 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- IPv6: Table for configuring Servers (Unicast)
|
|
-- ----------------------------------------------------------------------
|
|
|
|
rlSntpConfigServerInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpServerInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing trusted SNTP servers to be queried in
|
|
unicast or broadcast mode."
|
|
::= { rlSntpConfig 17 }
|
|
|
|
rlSntpServerInetEntry OBJECT-TYPE
|
|
SYNTAX RlSntpServerInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A trusted server."
|
|
INDEX { rlSntpServerInetAddressType,
|
|
rlSntpServerInetAddress }
|
|
::= { rlSntpConfigServerInetTable 1 }
|
|
|
|
RlSntpServerInetEntry ::=
|
|
SEQUENCE {
|
|
rlSntpServerInetAddressType InetAddressType,
|
|
rlSntpServerInetAddress InetAddress,
|
|
rlSntpServerInetPolled TruthValue,
|
|
rlSntpServerInetStratum NTPStratum,
|
|
rlSntpServerInetLastResp NTPTimeStamp,
|
|
rlSntpServerInetStatus INTEGER,
|
|
rlSntpServerInetOffset NTPTimeStamp,
|
|
rlSntpServerInetDelay NTPSignedTimeValue,
|
|
rlSntpServerInetKeyIdentifier Unsigned32,
|
|
rlSntpServerInetRowStatus RowStatus,
|
|
rlSntpServerInetLastReq NTPTimeStamp
|
|
}
|
|
|
|
rlSntpServerInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet Address Type of a trusted SNTP server."
|
|
::= { rlSntpServerInetEntry 1 }
|
|
|
|
rlSntpServerInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet Address of a trusted SNTP server."
|
|
::= { rlSntpServerInetEntry 2 }
|
|
|
|
rlSntpServerInetPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpServerInetEntry 3 }
|
|
|
|
rlSntpServerInetStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpServerInetEntry 4 }
|
|
|
|
rlSntpServerInetLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Response Time"
|
|
::= { rlSntpServerInetEntry 5 }
|
|
|
|
rlSntpServerInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Server.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpServerInetEntry 6 }
|
|
|
|
rlSntpServerInetOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpServerInetEntry 7 }
|
|
|
|
rlSntpServerInetDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpServerInetEntry 8 }
|
|
|
|
rlSntpServerInetKeyIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key identifier. The valid range is
|
|
1-4294967295.
|
|
Value zero, means no authentication is being done."
|
|
::= { rlSntpServerInetEntry 9 }
|
|
|
|
rlSntpServerInetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Status of this SNTP server information."
|
|
::= { rlSntpServerInetEntry 10 }
|
|
|
|
rlSntpServerInetLastReq OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Request Time"
|
|
::= { rlSntpServerInetEntry 11 }
|
|
|
|
|
|
rlSntpAllServerInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSntpAllServerInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing all SNTP servers (for example: statically
|
|
configured, dynamically configured) to be queried in unicast
|
|
or broadcast mode."
|
|
::= { rlSntpConfig 18 }
|
|
|
|
rlSntpAllServerInetEntry OBJECT-TYPE
|
|
SYNTAX RlSntpAllServerInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A server entry."
|
|
|
|
INDEX { rlSntpAllServerSource,
|
|
rlSntpAllServerIfIndex,
|
|
rlSntpAllServerPreference,
|
|
rlSntpAllServerInetAddressType,
|
|
rlSntpAllServerInetAddress
|
|
}
|
|
::= { rlSntpAllServerInetTable 1 }
|
|
|
|
RlSntpAllServerInetEntry ::=
|
|
SEQUENCE {
|
|
rlSntpAllServerSource INTEGER,
|
|
rlSntpAllServerIfIndex InterfaceIndex,
|
|
rlSntpAllServerPreference INTEGER,
|
|
rlSntpAllServerInetAddressType InetAddressType,
|
|
rlSntpAllServerInetAddress InetAddress,
|
|
rlSntpAllServerInetPolled TruthValue,
|
|
rlSntpAllServerInetStratum NTPStratum,
|
|
rlSntpAllServerInetLastResp NTPTimeStamp,
|
|
rlSntpAllServerInetStatus INTEGER,
|
|
rlSntpAllServerInetOffset NTPTimeStamp,
|
|
rlSntpAllServerInetDelay NTPSignedTimeValue,
|
|
rlSntpAllServerInetKeyIdentifier Unsigned32,
|
|
rlSntpAllServerInetLastReq NTPTimeStamp
|
|
}
|
|
|
|
rlSntpAllServerSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dhcpv6(2),
|
|
dhcpv4(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The SNTP server source: static means manually defined,
|
|
dhcpv6 means learnt from DHCP. Only static entries are
|
|
stored in CDB."
|
|
::= { rlSntpAllServerInetEntry 1 }
|
|
|
|
rlSntpAllServerIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The ifIndex from which the SNTP server configuration was
|
|
received (for dhcpv6 configurations). For static entries
|
|
the value of this field will always be 1. "
|
|
::= { rlSntpAllServerInetEntry 2 }
|
|
|
|
rlSntpAllServerPreference OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The preference of SNTP server (for dhcpv6 configurations).
|
|
For static entries the value of this field will always be 0. "
|
|
::= { rlSntpAllServerInetEntry 3 }
|
|
|
|
rlSntpAllServerInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SNTP server inet address type."
|
|
::= { rlSntpAllServerInetEntry 4 }
|
|
|
|
rlSntpAllServerInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SNTP server inet address."
|
|
::= { rlSntpAllServerInetEntry 5 }
|
|
|
|
rlSntpAllServerInetPolled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
|
|
DEFVAL { false }
|
|
::= { rlSntpAllServerInetEntry 6 }
|
|
|
|
rlSntpAllServerInetStratum OBJECT-TYPE
|
|
SYNTAX NTPStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stratum of this server."
|
|
::= { rlSntpAllServerInetEntry 7 }
|
|
|
|
rlSntpAllServerInetLastResp OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Response Time"
|
|
::= { rlSntpAllServerInetEntry 8 }
|
|
|
|
rlSntpAllServerInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
inProcess(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Operational State of the remote IP Address of
|
|
the SNTP Server.
|
|
unknown - requests were not sent yet.
|
|
inProcess - replies were not received yet.
|
|
up - server sent SNTP packets.
|
|
down - server stopped sending SNTP packets."
|
|
DEFVAL { unknown }
|
|
::= { rlSntpAllServerInetEntry 9 }
|
|
|
|
rlSntpAllServerInetOffset OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated offset of the server's clock relative to
|
|
the local clock, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAllServerInetEntry 10 }
|
|
|
|
rlSntpAllServerInetDelay OBJECT-TYPE
|
|
SYNTAX NTPSignedTimeValue
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated round-trip delay of the server's clock
|
|
relative to the local clock over the network path
|
|
between them, in seconds. The host determines the
|
|
value of this object using the algorithm described in
|
|
RFC 2030."
|
|
::= { rlSntpAllServerInetEntry 11 }
|
|
|
|
rlSntpAllServerInetKeyIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key identifier. The valid range is
|
|
1-4294967295.
|
|
Value zero, means no authentication is being done."
|
|
::= { rlSntpAllServerInetEntry 12 }
|
|
|
|
rlSntpAllServerInetLastReq OBJECT-TYPE
|
|
SYNTAX NTPTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP Server Last Request Time"
|
|
::= { rlSntpAllServerInetEntry 13 }
|
|
|
|
rlSntpRestoreDefaultServers OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this scalar to true restores sntp default unicast servers.
|
|
Meaning: all manually configured servers are deleted, and the
|
|
default SNTP servers are recreated with their default values.
|
|
This is an 'action' scalar."
|
|
::= { rlSntpConfig 19 }
|
|
|
|
rlSntpTimeSinceLastSync OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SNTP time in seconds since last sync."
|
|
::= { rlSntpConfig 20 }
|
|
|
|
END
|