Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
128 lines
3.8 KiB
Text
128 lines
3.8 KiB
Text
CISCOSB-LBD-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Title: CISCOSB LBD Configuration
|
|
-- Version: 7.45.00.00
|
|
-- Date: 24-Oct-2007
|
|
--
|
|
|
|
IMPORTS
|
|
TruthValue,TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
ifIndex FROM IF-MIB
|
|
switch001 FROM CISCOSB-MIB;
|
|
|
|
|
|
|
|
rlLbd MODULE-IDENTITY
|
|
LAST-UPDATED "200711070001Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
DESCRIPTION
|
|
"The private MIB module definition for Loopback Detection MIB."
|
|
REVISION "200711070000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { switch001 127 }
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
rlLbdEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable Loopback Detection in the switch."
|
|
::= { rlLbd 1 }
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
rlLbdDetectionInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(5..60)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time in seconds that should pass between unicast LBD packets."
|
|
::= { rlLbd 2 }
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
rlLbdMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
source-mac-addr (1),
|
|
base-mac-addr (2),
|
|
broadcast-mac-addr (3),
|
|
predefined-multicast-mac-addr (4),
|
|
user-defined-mac-addr (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loopback detection mode."
|
|
::= { rlLbd 3 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
rlLbdPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlLbdPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains Admin configuration and operational status per port."
|
|
::= { rlLbd 4 }
|
|
|
|
|
|
rlLbdPortEntry OBJECT-TYPE
|
|
SYNTAX RlLbdPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represent a port.
|
|
Per port contains LBD Admin configuration (SET) and status (GET),
|
|
LBD Operational status and LBD Vlan configuration (SET) and status (GET)."
|
|
|
|
INDEX { ifIndex }
|
|
::= { rlLbdPortTable 1 }
|
|
|
|
RlLbdPortEntry ::= SEQUENCE {
|
|
rlLbdPortAdminStatus INTEGER,
|
|
rlLbdPortOperStatus INTEGER
|
|
}
|
|
|
|
rlLbdPortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable Loopback Detection on port"
|
|
::= { rlLbdPortEntry 1 }
|
|
|
|
rlLbdPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive (1),
|
|
active (2),
|
|
loopDetected (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates Loopback Detection operational status on port.
|
|
'inactive' means that the port is not working in loop-detected operational state;
|
|
'active' means that the port is Up and working in state of loop-detecting;
|
|
'loop-detected' means that the system has detected loop on the port."
|
|
DEFVAL { inactive }
|
|
::= { rlLbdPortEntry 2 }
|
|
|
|
|
|
END
|