graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/cisco/CISCO-STACKWISE-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1842 lines
66 KiB
Text
Raw Blame History

-- *******************************************************************
-- CISCO-STACKWISE-MIB.my: Cisco StackWise MIB
--
-- Description of managed objects for the StackWise technology.
--
-- October 2005, Gunnar Lovblom
--
-- Copyright (c) 2005, 2008-2012,2016 by Cisco Systems, Inc.
-- All rights reserved.
-- ******************************************************************
CISCO-STACKWISE-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE
FROM SNMPv2-SMI
NOTIFICATION-GROUP,
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
entPhysicalIndex
FROM ENTITY-MIB
ifIndex
FROM IF-MIB
TruthValue,
MacAddress,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
EntPhysicalIndexOrZero
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoStackWiseMIB MODULE-IDENTITY
LAST-UPDATED "201604160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
Tel: +1 800 553-NETS
E-mail: cs-dsbu@cisco.com"
DESCRIPTION
"This MIB module contain a collection of managed objects
that apply to network devices supporting the Cisco
StackWise(TM) technology.
The StackWise technology provides a method for collectively
utilizing a stack of switches to create a single switching
unit.
The data stack is used for switching data packets and, in
power stack, switches are connected by special stack power
cables to share power. Moreover, stackwise is the concept
for combining multiple systems to give an impression of a
single system so that is why both power stack and data stack
are supported by single MIB.
Terminology:
Stack - A collection of switches connected by the
Cisco StackWise technology.
Master - The switch that is managing the stack.
Member - A switch in the stack that is
NOT the stack master.
Ring - Components that makes up the connections
between the switches in order to create a
stack.
Stackport - A special physical connector used by the ring.
It is possible for a switch have more than
one stackport.
SDM - Switch Database Management.
Stack Power - A collection of switches connected by special
stack power cables to share the power of
inter-connected power supplies across all switches
requiring power. Stack Power is managed by a
single data stack.
Jack-Jack - It is a device that provides the Power Shelf
capabilities required for Stack Power on
the high-end.
POE - Power Over Ethernet
FEP - Front End Power Supply
SOC - Sustained Overload Condition
GLS - Graceful Load Shedding
ILS - Immediate Load Shedding
SRLS - System Ring Load Shedding
SSLS - System Star Load Shedding"
REVISION "201604160000Z"
DESCRIPTION
"Added following objects in cswGlobals
- cswStackDomainNum
- cswStackType
- cswStackBandWidth
Created following tables
- cswDistrStackLinkInfoTable
-cswDistrStackPhyPortInfoTable
Added cswStatusGroupRev2
Deprecated cswStatusGroupRev1
Added cswDistrStackLinkStatusGroup
Added cswDistrStackPhyPortStatusGroup
Added cswStackWiseMIBComplianceRev4 MIB COMPLIANCE
Deprecated cswStackWiseMIBComplianceRev3 MIB COMPLIANCE."
REVISION "201511240000Z"
DESCRIPTION
"Added following Objects in cswSwitchInfoTable
- cswSwitchPowerAllocated
Added following OBJECT-GROUP
- cswStackPowerAllocatedGroup
Deprecated cswStackWiseMIBComplianceRev2 MODULE-COMPLIANCE.
Added cswStackWiseMIBComplianceRev3 MODULE-COMPLIANCE."
REVISION "201112120000Z"
DESCRIPTION
"Modified 'cswSwitchRole' object."
REVISION "201002010000Z"
DESCRIPTION
"Added cswStackPowerStatusGroup, cswStackPowerSwitchStatusGroup,
cswStackPowerPortStatusGroup, cswStatusGroupRev1 and
cswStackPowerNotificationGroup.
Deprecated cswStackWiseMIBCompliance compliance statement.
Added cswStackWiseMIBComplianceRev1 compliance statement.
Deprecated cswStatusGroup because we deprecated
cswEnableStackNotifications"
REVISION "200806100000Z"
DESCRIPTION
"Modified 'cswSwitchState' object."
REVISION "200510120000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 500 }
CswPowerStackMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is used to describe the mode of the
power stack. Since the power stack could only run in either
power sharing or redundant mode so this TC will also have only
following valid values,
powerSharing(1) :When a power stack is running in power
sharing mode then all the power supplies
in the power stack contributes towards
the global power budget of the stack.
redundant(2) :If the user wants the power stack to run
in redundant mode then we will take the
capacity of the largest power supply in
the power stack out of power stack global
power budget pool.
powerSharingStrict(3):This mode is same as power sharing mode
but, in this mode, the available power
will always be more than the used power.
redundantStrict(4) :This mode is same as redundant mode but,
in this mode, the available power will
always be more than the used power."
SYNTAX INTEGER {
powerSharing(1),
redundant(2),
powerSharingStrict(3),
redundantStrict(4)
}
CswPowerStackType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual conventions is used to describe the type of the
power stack. Since the power stack could only be configured in
a ring or star topology so this TC will have only following
valid values,
ring(1): The power stack has been formed by connecting
the switches in ring topology.
star(2): The power stack has been formed by connecting
the switches in star topology."
SYNTAX INTEGER {
ring(1),
star(2)
}
ciscoStackWiseMIBNotifs OBJECT IDENTIFIER
::= { ciscoStackWiseMIB 0 }
ciscoStackWiseMIBObjects OBJECT IDENTIFIER
::= { ciscoStackWiseMIB 1 }
ciscoStackWiseMIBConform OBJECT IDENTIFIER
::= { ciscoStackWiseMIB 2 }
cswGlobals OBJECT IDENTIFIER
::= { ciscoStackWiseMIBObjects 1 }
cswStackInfo OBJECT IDENTIFIER
::= { ciscoStackWiseMIBObjects 2 }
cswStackPowerInfo OBJECT IDENTIFIER
::= { ciscoStackWiseMIBObjects 3 }
-- Textual Conventions
CswSwitchNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each switch in a group
of stackable switches."
SYNTAX Unsigned32 (1..4294967295)
CswSwitchNumberOrZero ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than or equal to zero, for each switch
in a group of stackable switches.
A value of zero means that the switch number can not be
determined. The value of zero is not unique."
SYNTAX Unsigned32 (0..4294967295)
CswSwitchPriority ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A value, greater than or equal to zero, that defines the
priority of a switch in a group of stackable switches. The
higher the value, the higher the priority."
SYNTAX Unsigned32 (0..4294967295)
-- Global objects pertinent to all switches
cswMaxSwitchNum OBJECT-TYPE
SYNTAX CswSwitchNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of switches that can be configured on
this stack. This is also the maximum value that can be
set by the cswSwitchNumNextReload object."
::= { cswGlobals 1 }
cswMaxSwitchConfigPriority OBJECT-TYPE
SYNTAX CswSwitchPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum configurable priority for a switch in this stack.
Highest value equals highest priority. This is the highest
value that can be set by the cswSwitchSwPriority object."
::= { cswGlobals 2 }
cswRingRedundant OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of 'true' is returned when the stackports are
connected in such a way that it forms a redundant ring."
::= { cswGlobals 3 }
cswStackPowerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CswStackPowerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the information about all the power stacks in
a single data stack."
::= { cswStackPowerInfo 1 }
cswStackPowerInfoEntry OBJECT-TYPE
SYNTAX CswStackPowerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the cswStackPowerInfoTable for each of the power
stacks in a single data stack. This entry contains information
regarding the power stack."
INDEX { cswStackPowerStackNumber }
::= { cswStackPowerInfoTable 1 }
CswStackPowerInfoEntry ::= SEQUENCE {
cswStackPowerStackNumber Unsigned32,
cswStackPowerMode CswPowerStackMode,
cswStackPowerMasterMacAddress MacAddress,
cswStackPowerMasterSwitchNum Unsigned32,
cswStackPowerNumMembers Unsigned32,
cswStackPowerType CswPowerStackType,
cswStackPowerName SnmpAdminString
}
cswStackPowerStackNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, to identify a power stack."
::= { cswStackPowerInfoEntry 1 }
cswStackPowerMode OBJECT-TYPE
SYNTAX CswPowerStackMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the information about the mode of the
power stack.
Power-sharing mode: All of the input power can be used for
loads, and the total available power appears as one huge power
supply. The power budget includes all power from all supplies.
No power is set aside for power supply failures, so if a power
supply fails, load shedding (shutting down of powered devices or
switches) might occur. This is the default.
Redundant mode: The largest power supply is removed from the
power pool to be used as backup power in case one of the other
power supplies fails. The available power budget is the total
power minus the largest power supply. This reduces the available
power in the pool for switches and powered devices to draw from,
but in case of a failure or an extreme power load, there is less
chance of having to shut down switches or powered devices. This
is the recommended operating mode if your system has enough
power.
In addition, you can configure each mode to run a strict power
budget or a non-strict (loose) power budget. If the mode is
strict, the stack power needs cannot exceed the available power.
When the power budgeted to devices reaches the maximum available
PoE power, power is denied to the next device seeking power. In
this mode the stack never goes into an over-budgeted power mode.
When the mode is non-strict, budgeted power is allowed to exceed
available power. This is normally not a problem because most
devices do not run at full power and the chances of all powered
devices in the stack requiring maximum power at the same time is
small."
::= { cswStackPowerInfoEntry 2 }
cswStackPowerMasterMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Mac address of the power stack
master."
::= { cswStackPowerInfoEntry 3 }
cswStackPowerMasterSwitchNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the switch number of the power stack
master.
The value of this object would be zero if the power stack
master is not part of this data stack."
::= { cswStackPowerInfoEntry 4 }
cswStackPowerNumMembers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of members in the power
stack."
::= { cswStackPowerInfoEntry 5 }
cswStackPowerType OBJECT-TYPE
SYNTAX CswPowerStackType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the topology of the power stack, that is,
whether the switch is running in RING or STAR topology."
::= { cswStackPowerInfoEntry 6 }
cswStackPowerName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies a unique name of this power stack. A
zero-length string indicates no name is assigned."
::= { cswStackPowerInfoEntry 7 }
cswStackPowerPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CswStackPowerPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the stack power ports.
There exists an entry in this table for each physical stack
power port."
::= { cswStackPowerInfo 2 }
cswStackPowerPortInfoEntry OBJECT-TYPE
SYNTAX CswStackPowerPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cswStackPowerPortInfoTable. This entry
contains information about a power stack port."
INDEX {
entPhysicalIndex,
cswStackPowerPortIndex
}
::= { cswStackPowerPortInfoTable 1 }
CswStackPowerPortInfoEntry ::= SEQUENCE {
cswStackPowerPortIndex Unsigned32,
cswStackPowerPortOperStatus INTEGER,
cswStackPowerPortNeighborMacAddress MacAddress,
cswStackPowerPortNeighborSwitchNum CswSwitchNumberOrZero,
cswStackPowerPortLinkStatus INTEGER,
cswStackPowerPortOverCurrentThreshold Unsigned32,
cswStackPowerPortName SnmpAdminString
}
cswStackPowerPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each stack power port."
::= { cswStackPowerPortInfoEntry 1 }
cswStackPowerPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to either set or unset the operational
status of the stack port. This object will have following valid
values,
enabled(1) : The port is enabled
disabled(2) : The port is forced down"
::= { cswStackPowerPortInfoEntry 2 }
cswStackPowerPortNeighborMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates the port neighbor's Mac Address."
::= { cswStackPowerPortInfoEntry 3 }
cswStackPowerPortNeighborSwitchNum OBJECT-TYPE
SYNTAX CswSwitchNumberOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates the port neighbor's switch number. If
either there is no switch connected or the neighbor is not
Jack-Jack then the value of this object is going to be 0."
::= { cswStackPowerPortInfoEntry 4 }
cswStackPowerPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to describe the link status of the stack
port. This object will have following valid
values,
up(1) : The port is connected and operational
down(2): The port is either forced down or not connected"
::= { cswStackPowerPortInfoEntry 5 }
cswStackPowerPortOverCurrentThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Amperes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to retrieve the over current threshold. The
stack power cables are limited to carry current up to the limit
retrieved by this object. The stack power cables would not be
able to function properly if either the input or output current
goes beyond the threshold retrieved by this object."
::= { cswStackPowerPortInfoEntry 6 }
cswStackPowerPortName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a unique name of the stack power port as
shown on the face plate of the system. A zero-length string
indicates no name is assigned."
::= { cswStackPowerPortInfoEntry 7 }
cswEnableStackNotifications OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object indicates whether the system generates the
notifications defined in this MIB or not. A value of
'false' will prevent the notifications from being sent."
::= { cswGlobals 4 }
cswEnableIndividualStackNotifications OBJECT-TYPE
SYNTAX BITS {
stackPortChange(0),
stackNewMaster(1),
stackMismatch(2),
stackRingRedundant(3),
stackNewMember(4),
stackMemberRemoved(5),
stackPowerLinkStatusChanged(6),
stackPowerPortOperStatusChanged(7),
stackPowerVersionMismatch(8),
stackPowerInvalidTopology(9),
stackPowerBudgetWarning(10),
stackPowerInvalidInputCurrent(11),
stackPowerInvalidOutputCurrent(12),
stackPowerUnderBudget(13),
stackPowerUnbalancedPowerSupplies(14),
stackPowerInsufficientPower(15),
stackPowerPriorityConflict(16),
stackPowerUnderVoltage(17),
stackPowerGLS(18),
stackPowerILS(19),
stackPowerSRLS(20),
stackPowerSSLS(21),
stackMemberToBeReloadedForUpgrade(22)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable individual notifications
defined in this MIB module. Turning on a particular bit would
enable the corresponding trap and, similarly, turning off a
particular bit would disable the corresponding trap. The
following notifications are controlled by this object:
stackPortChange(0): enables/disables cswStackPortChange
notification.
stackNewMaster(1): enables/disables cswStackNewMember
notification.
stackMismatch(2): enables/disables cswStackMismatch
notification.
stackRingRedundant(3): enables/disables cswStackRingRedundant
notification.
stackNewMember(4): enables/disables cswStackNewMember
notification.
stackMemberRemoved(5): enables/disables cswStackMemberRemoved
notification.
stackPowerLinkStatusChanged(6): enables/disables
cswStackPowerPortLinkStatusChanged notification.
stackPowerPortOperStatusChanged(7): enables/disables
cswStackPowerPortOperStatusChanged notification.
stackPowerVersionMismatch(8): enables/disables
cswStackPowerVersionMismatch notification.
stackPowerInvalidTopology(9): enables/disables
cswStackPowerInvalidTopology notification
stackPowerBudgetWarning(10): enables/disables
cswStackPowerBudgetWarning notification.
stackPowerInvalidInputCurrent(11): enables/disables
cswStackPowerInvalidInputCurrent notification.
stackPowerInvalidOutputCurrent(12): enables/disables
cswStackPowerInvalidOutputCurrent notification.
stackPowerUnderBudget(13): enables/disables
cswStackPowerUnderBudget notification.
stackPowerUnbalancedPowerSupplies(14): enables/disables
cswStackPowerUnbalancedPowerSupplies notification.
stackPowerInsufficientPower(15): enables/disables
cswStackPowerInsufficientPower notification.
stackPowerPriorityConflict(16): enables/disables
cswStackPowerPriorityConflict notification.
stackPowerUnderVoltage(17): enables/disables
cswStackPowerUnderVoltage notification.
stackPowerGLS(18): enables/disables cswStackPowerGLS
notification.
stackPowerILS(19): enables/disabled cswStackPowerILS
notification.
stackPowerSRLS(20): enables/disables cswStackPowerSRLS
notification.
stackPowerSSLS(21): enables/disables cswStackPowerSSLS
notification.
stackMemberToBeReloadedForUpgrade(22): enables/disables
cswStackMemberToBeReloadedForUpgrade notification."
::= { cswGlobals 5 }
cswStackDomainNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates distributed domain of the switch.Only
Switches with the same domain number can be in the same dist
ributed domain.0 means no switch domain configured."
::= { cswGlobals 6 }
cswStackType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates type of switch stack. value
of Switch virtual domain determines if switch is
distributed or conventional stack. 0 means stack
is conventional back side stack."
::= { cswGlobals 7 }
cswStackBandWidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates stack bandwidth."
::= { cswGlobals 8 }
-- Switch Information Table
cswSwitchInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CswSwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information specific to switches in a
stack. Every switch with an entry in the entPhysicalTable
(ENTITY-MIB) whose entPhysicalClass is 'chassis' will have
an entry in this table."
::= { cswStackInfo 1 }
cswSwitchInfoEntry OBJECT-TYPE
SYNTAX CswSwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cswSwitchInfoTable describing
a switch information."
INDEX { entPhysicalIndex }
::= { cswSwitchInfoTable 1 }
CswSwitchInfoEntry ::= SEQUENCE {
cswSwitchNumCurrent CswSwitchNumber,
cswSwitchNumNextReload CswSwitchNumberOrZero,
cswSwitchRole INTEGER,
cswSwitchSwPriority CswSwitchPriority,
cswSwitchHwPriority CswSwitchPriority,
cswSwitchState INTEGER,
cswSwitchMacAddress MacAddress,
cswSwitchSoftwareImage SnmpAdminString,
cswSwitchPowerBudget Unsigned32,
cswSwitchPowerCommited Unsigned32,
cswSwitchSystemPowerPriority Unsigned32,
cswSwitchPoeDevicesLowPriority Unsigned32,
cswSwitchPoeDevicesHighPriority Unsigned32,
cswSwitchPowerAllocated Unsigned32
}
cswSwitchNumCurrent OBJECT-TYPE
SYNTAX CswSwitchNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current switch identification number.
This number should match any logical labeling on the switch.
For example, a switch whose interfaces are labeled
'interface #3' this value should be 3."
::= { cswSwitchInfoEntry 1 }
cswSwitchNumNextReload OBJECT-TYPE
SYNTAX CswSwitchNumberOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the cswSwitchNumCurrent to be
used at next reload. The maximum value for this object is
defined by the cswMaxSwitchNum object.
Note: This object will contain 0 and cannot be set if the
cswSwitchState value is other than 'ready'."
::= { cswSwitchInfoEntry 2 }
cswSwitchRole OBJECT-TYPE
SYNTAX INTEGER {
master(1),
member(2),
notMember(3),
standby(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the function of the switch:
master - stack master.
member - active member of the stack.
notMember - none-active stack member, see
cswSwitchState for status.
standby - stack standby switch."
::= { cswSwitchInfoEntry 3 }
cswSwitchSwPriority OBJECT-TYPE
SYNTAX CswSwitchPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A number containing the priority of a switch. The switch with
the highest priority will become the master. The maximum value
for this object is defined by the cswMaxSwitchConfigPriority
object.
If after a reload the value of cswMaxSwitchConfigPriority
changes to a smaller value, and the value of cswSwitchSwPriority
has been previously set to a value greater or equal to the
new cswMaxSwitchConfigPriority, then the SNMP agent must set
cswSwitchSwPriority to the new cswMaxSwitchConfigPriority.
Note: This object will contain the value of 0 if the
cswSwitchState value is other than 'ready'."
::= { cswSwitchInfoEntry 4 }
cswSwitchHwPriority OBJECT-TYPE
SYNTAX CswSwitchPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the hardware priority of a switch. If
two or more entries in this table have the same
cswSwitchSwPriority value during the master election time,
the switch with the highest cswSwitchHwPriority will become
the master.
Note: This object will contain the value of 0 if the
cswSwitchState value is other than 'ready'."
::= { cswSwitchInfoEntry 5 }
cswSwitchState OBJECT-TYPE
SYNTAX INTEGER {
waiting(1),
progressing(2),
added(3),
ready(4),
sdmMismatch(5),
verMismatch(6),
featureMismatch(7),
newMasterInit(8),
provisioned(9),
invalid(10),
removed(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of a switch:
waiting - Waiting for a limited time on other
switches in the stack to come online.
progressing - Master election or mismatch checks in
progress.
added - The switch is added to the stack.
ready - The switch is operational.
sdmMismatch - The SDM template configured on the master
is not supported by the new member.
verMismatch - The operating system version running on the
master is different from the operating
system version running on this member.
featureMismatch - Some of the features configured on the
master are not supported on this member.
newMasterInit - Waiting for the new master to finish
initialization after master switchover
(Master Re-Init).
provisioned - The switch is not an active member of the
stack.
invalid - The switch's state machine is in an
invalid state.
removed - The switch is removed from the stack."
::= { cswSwitchInfoEntry 6 }
cswSwitchMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the switch.
Note: This object will contain the value of 0000:0000:0000
if the cswSwitchState value is other than 'ready'."
::= { cswSwitchInfoEntry 7 }
cswSwitchSoftwareImage OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The software image type running on the switch.
Note: This object will contain an empty string if the
cswSwitchState value is other than 'ready'."
::= { cswSwitchInfoEntry 8 }
cswSwitchPowerBudget OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the power budget of the switch."
::= { cswSwitchInfoEntry 9 }
cswSwitchPowerCommited OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the power committed to the POE devices
connected to the switch."
::= { cswSwitchInfoEntry 10 }
cswSwitchSystemPowerPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the system's power priority. In case of
a power failure then the system with the highest system
priority will be brought down last."
::= { cswSwitchInfoEntry 11 }
cswSwitchPoeDevicesLowPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the priority of the system's low
priority POE devices."
::= { cswSwitchInfoEntry 12 }
cswSwitchPoeDevicesHighPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the priority of the system's high
priority POE devices. In order to avoid losing the high
priority POE devices before the low priority POE devices,
this object's value must be greater than value of
cswSwitchPoeDevicesLowPriority."
::= { cswSwitchInfoEntry 13 }
cswSwitchPowerAllocated OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the power committed to the POE devices
connected to the switch."
::= { cswSwitchInfoEntry 14 }
-- StackPort Information Table
cswStackPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CswStackPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains stackport specific information. There
exists an entry in this table for every physical stack
port that have an entry in the ifTable (IF-MIB)."
::= { cswStackInfo 2 }
cswStackPortInfoEntry OBJECT-TYPE
SYNTAX CswStackPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cswStackPortInfoTable. An entry
contains information about a stackport."
INDEX { ifIndex }
::= { cswStackPortInfoTable 1 }
CswStackPortInfoEntry ::= SEQUENCE {
cswStackPortOperStatus INTEGER,
cswStackPortNeighbor EntPhysicalIndexOrZero
}
cswStackPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
forcedDown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the stackport.
up - Connected and operational.
down - Not connected to a neighboring switch or
administrative down.
forcedDown - Shut down by stack manager due to mismatch or
stackport errors."
::= { cswStackPortInfoEntry 1 }
cswStackPortNeighbor OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the entPhysicalIndex of the
switch's chassis to which this stackport is connected to. If
the stackport is not connected, the value 0 is returned."
::= { cswStackPortInfoEntry 2 }
-- Distributed Stack Link Information Table
cswDistrStackLinkInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CswDistrStackLinkInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Distributed Stack Link Information."
::= { cswStackInfo 3 }
cswDistrStackLinkInfoEntry OBJECT-TYPE
SYNTAX CswDistrStackLinkInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry containing information about DSL link."
INDEX { entPhysicalIndex ,
cswDSLindex }
::= { cswDistrStackLinkInfoTable 1 }
CswDistrStackLinkInfoEntry ::= SEQUENCE {
cswDSLindex Unsigned32,
cswDistrStackLinkBundleOperStatus INTEGER
}
cswDSLindex OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is index of the distributed stack link
with respect to each interface port"
::= { cswDistrStackLinkInfoEntry 1 }
cswDistrStackLinkBundleOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the stackLink.
up - Connected and operational.
down - Not connected or administrative down."
::= { cswDistrStackLinkInfoEntry 2 }
-- Distributed Stack Port Information Table
cswDistrStackPhyPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CswDistrStackPhyPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects for Distributed stack
Link information Table."
::= { cswStackInfo 4 }
cswDistrStackPhyPortInfoEntry OBJECT-TYPE
SYNTAX CswDistrStackPhyPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry containing information about stack port that
is part of Distributed Stack Link."
INDEX { entPhysicalIndex,
cswDSLindex,
ifIndex
}
::= { cswDistrStackPhyPortInfoTable 1 }
CswDistrStackPhyPortInfoEntry ::= SEQUENCE {
cswDistrStackPhyPort SnmpAdminString,
cswDistrStackPhyPortOperStatus INTEGER,
cswDistrStackPhyPortNbr SnmpAdminString,
cswDistrStackPhyPortNbrsw EntPhysicalIndexOrZero
}
cswDistrStackPhyPort OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of distributed stack port."
::= { cswDistrStackPhyPortInfoEntry 1 }
cswDistrStackPhyPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the distributed stackport.
up - Connected and operational.
down - Not connected to a neighboring switch or
administrative down."
::= { cswDistrStackPhyPortInfoEntry 2 }
cswDistrStackPhyPortNbr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of
distributed stack port's neighbor."
::= { cswDistrStackPhyPortInfoEntry 3 }
cswDistrStackPhyPortNbrsw OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the EntPhysicalIndex of
the distributed stack port's neigbor switch."
::= { cswDistrStackPhyPortInfoEntry 4 }
-- Notifications
cswMIBNotifications OBJECT IDENTIFIER
::= { ciscoStackWiseMIBNotifs 0 }
cswStackPortChange NOTIFICATION-TYPE
OBJECTS {
ifIndex,
cswStackPortOperStatus,
cswSwitchNumCurrent
}
STATUS current
DESCRIPTION
"This notification is generated when the state
of a stack port has changed."
::= { cswMIBNotifications 1 }
cswStackNewMaster NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when a new master has been
elected. The notification will contain the cswSwitchNumCurrent
object to indicate the new master ID."
::= { cswMIBNotifications 2 }
cswStackMismatch NOTIFICATION-TYPE
OBJECTS {
cswSwitchState,
cswSwitchNumCurrent
}
STATUS current
DESCRIPTION
"This notification is generated when a new member attempt
to join the stack but was denied due to a mismatch. The
cswSwitchState object will indicate the type of mismatch."
::= { cswMIBNotifications 3 }
cswStackRingRedundant NOTIFICATION-TYPE
OBJECTS { cswRingRedundant }
STATUS current
DESCRIPTION
"This notification is generated when the redundancy of the
ring has changed."
::= { cswMIBNotifications 4 }
cswStackNewMember NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when a new member joins the
stack."
::= { cswMIBNotifications 5 }
cswStackMemberRemoved NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when a member is removed
from the stack."
::= { cswMIBNotifications 6 }
cswStackPowerPortLinkStatusChanged NOTIFICATION-TYPE
OBJECTS {
cswStackPowerPortLinkStatus,
cswSwitchNumCurrent,
cswStackPowerPortName
}
STATUS current
DESCRIPTION
"This notification is generated when the link status of a stack
power port is changed from up to down or down to up. This
notification is for informational purposes only and no action
is required. cswStackPowerPortLinkStatus indicates link status
of the stack power ports. cswSwitchNumCurrent indicates the
switch number of the system. cswStackPowerPortName specifies a
unique name of the stack power port as shown on the face plate
of the system."
::= { cswMIBNotifications 7 }
cswStackPowerPortOperStatusChanged NOTIFICATION-TYPE
OBJECTS {
cswSwitchNumCurrent,
cswStackPowerPortOperStatus,
cswStackPowerPortName
}
STATUS current
DESCRIPTION
"This notification is generated when the operational status of a
stack power port is changed from enabled to disabled or from
disabled to enabled. This notification is for informational
purposes only and no action is required. cswSwitchNumCurrent
indicates the switch number of the system.
cswStackPowerPortOperStatus indicates operational status
of the stack power ports. cswStackPowerPortName specifies
a unique name of the stack power port as shown on the face
plate of the system."
::= { cswMIBNotifications 8 }
cswStackPowerVersionMismatch NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when the major version of the
stack power protocol is different from the other members of the
power stack. Upon receiving this notification, the user should
make sure that he/she is using the same software version on all
the members of the same power stack. cswSwitchNumCurrent
indicates the switch number of the system seeing the power
stack version mismatch."
::= { cswMIBNotifications 9 }
cswStackPowerInvalidTopology NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when an invalid stack power
topology is discovered by a switch. cswSwitchNumCurrent
indicates the switch number of the system where the invalid
topology is discovered."
::= { cswMIBNotifications 10 }
cscwStackPowerBudgetWarrning NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when the switch power budget is
more than 1000W above its power supplies rated power output.
cswSwitchNumCurrent indicates the switch number of the system
where the invalid power budget has been detected."
::= { cswMIBNotifications 11 }
cswStackPowerInvalidInputCurrent NOTIFICATION-TYPE
OBJECTS {
cswSwitchNumCurrent,
cswStackPowerPortOverCurrentThreshold,
cswStackPowerPortName
}
STATUS current
DESCRIPTION
"This notification is generated when the input current in the
stack power cable is over the limit of the threshold retrieved
by the agent through cswStackPowerPortOverCurrentThreshold
object. Upon receiving this notification, the user should add a
power supply to the system whose switch number is generated
with this notification. cswSwitchNumCurrent
indicates the switch number of the system.
cswStackPowerPortOverCurrentThreshold indicates the over current
threshold of power stack cables. cswStackPowerPortName specifies
a unique name of the stack power port as shown on the face
plate of the system."
::= { cswMIBNotifications 12 }
cswStackPowerInvalidOutputCurrent NOTIFICATION-TYPE
OBJECTS {
cswSwitchNumCurrent,
cswStackPowerPortOverCurrentThreshold,
cswStackPowerPortName
}
STATUS current
DESCRIPTION
"This notification is generated when the output current in the
stack power cable is over the limit of the threshold retrieved
by the agent through cswStackPowerPortOverCurrentThreshold
object. Upon receiving this notification, the user should
remove a power supply from the system whose switch number is
generated with this notification. cswSwitchNumCurrent
indicates the switch number of the system.
cswStackPowerPortOverCurrentThreshold indicates the over current
threshold of power stack cables. cswStackPowerPortName specifies
a unique name of the stack power port as shown on the face
plate of the system."
::= { cswMIBNotifications 13 }
cswStackPowerUnderBudget NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when the switch's budget is less
than maximum possible switch power consumption.
cswSwitchNumCurrent indicates the switch number of the system
that is running with the power budget less than the power
consumption."
::= { cswMIBNotifications 14 }
cswStackPowerUnbalancedPowerSupplies NOTIFICATION-TYPE
OBJECTS { cswStackPowerName }
STATUS current
DESCRIPTION
"This notification is generated when the switch has no power
supply but another switch in the same stack has more than one
power supplies. cswStackPowerName specifies a unique name of the
power stack where the unbalanced power supplies are detected."
::= { cswMIBNotifications 15 }
cswStackPowerInsufficientPower NOTIFICATION-TYPE
OBJECTS { cswStackPowerName }
STATUS current
DESCRIPTION
"This notification is generated when the switch's power stack
does not have enough power to bring up all the switches in the
power stack. cswStackPowerName specifies a unique name of the
power stack where insufficient power condition is detected."
::= { cswMIBNotifications 16 }
cswStackPowerPriorityConflict NOTIFICATION-TYPE
OBJECTS { cswStackPowerName }
STATUS current
DESCRIPTION
"This notification is generated when the switch's power
priorities are conflicting with power priorities of another
switch in the same power stack. cswStackPowerPortName specifies
the unique name of the power stack where the conflicting power
priorities are detected."
::= { cswMIBNotifications 17 }
cswStackPowerUnderVoltage NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when the switch had an under
voltage condition on last boot up. cswSwitchNumCurrent
indicates the switch number of the system that was forced
down with the under voltage condition."
::= { cswMIBNotifications 18 }
cswStackPowerGLS NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when the switch had to shed
loads based on a sustained over load (SOC) condition.
cswSwitchNumCurrent indicates the switch number of the system
that goes through graceful load shedding."
::= { cswMIBNotifications 19 }
cswStackPowerILS NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when the switch had to shed
loads based on power supply fail condition. cswSwitchNumCurrent
indicates the switch number of the system that goes through
immediate load shedding."
::= { cswMIBNotifications 20 }
cswStackPowerSRLS NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when the switch had to shed
loads based on loss of a system in ring topology.
cswSwitchNumCurrent indicates the switch number of the system
that detects the loss of system in ring topology."
::= { cswMIBNotifications 21 }
cswStackPowerSSLS NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when the switch had to shed
loads based on loss of a system in star topology.
cswSwitchNumCurrent indicates the switch number of the system
that detects the loss of system in star topology."
::= { cswMIBNotifications 22 }
cswStackMemberToBeReloadedForUpgrade NOTIFICATION-TYPE
OBJECTS { cswSwitchNumCurrent }
STATUS current
DESCRIPTION
"This notification is generated when a member is to be reloaded
for upgrade."
::= { cswMIBNotifications 23 }
-- Conformance and Compliance statements
cswStackWiseMIBCompliances OBJECT IDENTIFIER
::= { ciscoStackWiseMIBConform 1 }
cswStackWiseMIBGroups OBJECT IDENTIFIER
::= { ciscoStackWiseMIBConform 2 }
cswStackWiseMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement the
CISCO-STACKWISE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cswStatusGroup,
cswNotificationGroup
}
OBJECT cswSwitchSwPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchNumNextReload
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cswStackWiseMIBCompliances 1 }
cswStackWiseMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statements for entities described in
CISCO-STACKWISE-MIB. Stack Power entities are added in this
revision."
MODULE -- this module
MANDATORY-GROUPS {
cswNotificationGroup,
cswStatusGroupRev1,
cswStackPowerEnableNotificationGroup
}
GROUP cswStackPowerStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerSwitchStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerPortStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerNotificationGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
::= { cswStackWiseMIBCompliances 2 }
cswStackWiseMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statements for entities described in
CISCO-STACKWISE-MIB. Stack Power entities are added in this
revision."
MODULE -- this module
MANDATORY-GROUPS {
cswNotificationGroup,
cswNotificationGroupSup1,
cswStatusGroupRev1,
cswStackPowerEnableNotificationGroup
}
GROUP cswStackPowerStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerSwitchStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerPortStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerNotificationGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
::= { cswStackWiseMIBCompliances 3 }
cswStackWiseMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statements for entities described in
CISCO-STACKWISE-MIB. Stack Power entities are added in this
revision."
MODULE -- this module
MANDATORY-GROUPS {
cswNotificationGroup,
cswNotificationGroupSup1,
cswStatusGroupRev1,
cswStackPowerEnableNotificationGroup
}
GROUP cswStackPowerStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerSwitchStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerPortStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerNotificationGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerAllocatedGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power allocation information."
OBJECT cswStackPowerMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswStackPowerName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswStackPowerPortOperStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswStackPowerPortOverCurrentThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswEnableIndividualStackNotifications
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchNumNextReload
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchSwPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchSystemPowerPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchPoeDevicesLowPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchPoeDevicesHighPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cswStackWiseMIBCompliances 4 }
cswStackWiseMIBComplianceRev4 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statements for entities described in
CISCO-STACKWISE-MIB. Stack Global entities are added in this
revision."
MODULE -- this module
MANDATORY-GROUPS {
cswNotificationGroup,
cswNotificationGroupSup1,
cswStatusGroupRev2,
cswStackPowerEnableNotificationGroup,
cswDistrStackLinkStatusGroup,
cswDistrStackPhyPortStatusGroup
}
GROUP cswStackPowerStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerSwitchStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerPortStatusGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerNotificationGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power."
GROUP cswStackPowerAllocatedGroup
DESCRIPTION
"This group is only mandatory for systems which support stack
power allocation information."
OBJECT cswStackPowerMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswStackPowerName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswStackPowerPortOperStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswStackPowerPortOverCurrentThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswEnableIndividualStackNotifications
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchNumNextReload
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchSwPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchSystemPowerPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchPoeDevicesLowPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cswSwitchPoeDevicesHighPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cswStackWiseMIBCompliances 5 }
-- units of conformance
cswStatusGroup OBJECT-GROUP
OBJECTS {
cswMaxSwitchNum,
cswMaxSwitchConfigPriority,
cswRingRedundant,
cswEnableStackNotifications,
cswSwitchNumCurrent,
cswSwitchNumNextReload,
cswSwitchRole,
cswSwitchSwPriority,
cswSwitchHwPriority,
cswSwitchState,
cswSwitchMacAddress,
cswSwitchSoftwareImage,
cswStackPortOperStatus,
cswStackPortNeighbor,
cswStackPowerType
}
STATUS deprecated
DESCRIPTION
"A collection of objects that are used for control and
status."
::= { cswStackWiseMIBGroups 1 }
cswNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cswStackPortChange,
cswStackNewMaster,
cswStackMismatch,
cswStackRingRedundant,
cswStackNewMember,
cswStackMemberRemoved
}
STATUS current
DESCRIPTION
"A collection of notifications that are required."
::= { cswStackWiseMIBGroups 2 }
cswStatusGroupRev1 OBJECT-GROUP
OBJECTS {
cswMaxSwitchNum,
cswMaxSwitchConfigPriority,
cswRingRedundant,
cswSwitchNumCurrent,
cswSwitchNumNextReload,
cswSwitchRole,
cswSwitchSwPriority,
cswSwitchHwPriority,
cswSwitchState,
cswSwitchMacAddress,
cswSwitchSoftwareImage
}
STATUS current
DESCRIPTION
"A collection of objects that are used for control and
status."
::= { cswStackWiseMIBGroups 3 }
cswStackPowerStatusGroup OBJECT-GROUP
OBJECTS {
cswStackPowerMode,
cswStackPowerMasterMacAddress,
cswStackPowerMasterSwitchNum,
cswStackPowerNumMembers,
cswStackPowerType,
cswStackPowerName
}
STATUS current
DESCRIPTION
"A collection of stack power objects that are used for control
and status of power stack."
::= { cswStackWiseMIBGroups 4 }
cswStackPowerSwitchStatusGroup OBJECT-GROUP
OBJECTS {
cswSwitchPowerBudget,
cswSwitchPowerCommited,
cswSwitchSystemPowerPriority,
cswSwitchPoeDevicesLowPriority,
cswSwitchPoeDevicesHighPriority
}
STATUS current
DESCRIPTION
"A collection of stack power objects that are used to track the
stack power parameters of a switch."
::= { cswStackWiseMIBGroups 5 }
cswStackPowerPortStatusGroup OBJECT-GROUP
OBJECTS {
cswStackPowerPortOperStatus,
cswStackPowerPortNeighborMacAddress,
cswStackPowerPortNeighborSwitchNum,
cswStackPowerPortLinkStatus,
cswStackPowerPortOverCurrentThreshold,
cswStackPowerPortName
}
STATUS current
DESCRIPTION
"A collection of objects that are used for control and status of
stack power ports."
::= { cswStackWiseMIBGroups 6 }
cswStackPowerNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cswStackPowerPortLinkStatusChanged,
cswStackPowerPortOperStatusChanged,
cswStackPowerVersionMismatch,
cswStackPowerInvalidTopology,
cscwStackPowerBudgetWarrning,
cswStackPowerInvalidInputCurrent,
cswStackPowerInvalidOutputCurrent,
cswStackPowerUnderBudget,
cswStackPowerUnbalancedPowerSupplies,
cswStackPowerInsufficientPower,
cswStackPowerPriorityConflict,
cswStackPowerUnderVoltage,
cswStackPowerGLS,
cswStackPowerILS,
cswStackPowerSRLS,
cswStackPowerSSLS
}
STATUS current
DESCRIPTION
"A collection of notifications that are triggered whenever there
is either a change in stack power object or an error is
encountered."
::= { cswStackWiseMIBGroups 7 }
cswStackPowerEnableNotificationGroup OBJECT-GROUP
OBJECTS { cswEnableIndividualStackNotifications }
STATUS current
DESCRIPTION
"This group contains the notification enable objects for this
MIB."
::= { cswStackWiseMIBGroups 8 }
cswNotificationGroupSup1 NOTIFICATION-GROUP
NOTIFICATIONS { cswStackMemberToBeReloadedForUpgrade }
STATUS current
DESCRIPTION
"Additional notification required for data stack."
::= { cswStackWiseMIBGroups 9 }
cswStackPowerAllocatedGroup OBJECT-GROUP
OBJECTS { cswSwitchPowerAllocated }
STATUS current
DESCRIPTION
"A collection of objects providing the stack power allocation
information of a switch."
::= { cswStackWiseMIBGroups 10 }
cswStatusGroupRev2 OBJECT-GROUP
OBJECTS {
cswMaxSwitchNum,
cswMaxSwitchConfigPriority,
cswRingRedundant,
cswSwitchNumCurrent,
cswSwitchNumNextReload,
cswSwitchRole,
cswSwitchSwPriority,
cswSwitchHwPriority,
cswSwitchState,
cswSwitchMacAddress,
cswStackDomainNum,
cswStackType,
cswStackBandWidth
}
STATUS current
DESCRIPTION
"A collection of objects that are used for control and
status."
::= { cswStackWiseMIBGroups 11 }
cswDistrStackLinkStatusGroup OBJECT-GROUP
OBJECTS { cswDistrStackLinkBundleOperStatus }
STATUS current
DESCRIPTION
"A collection object(s) for control and status of the
distributed Stack Link."
::= { cswStackWiseMIBGroups 12 }
cswDistrStackPhyPortStatusGroup OBJECT-GROUP
OBJECTS {
cswDistrStackPhyPort,
cswDistrStackPhyPortOperStatus,
cswDistrStackPhyPortNbr,
cswDistrStackPhyPortNbrsw
}
STATUS current
DESCRIPTION
"A collection of objects for control and status of the
distributed stack port"
::= { cswStackWiseMIBGroups 13 }
END
Reference in a new issue View git blame Copy permalink