Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
4068 lines
147 KiB
Text
4068 lines
147 KiB
Text
-- *******************************************************************
|
|
-- Airespace Switching MIB
|
|
-- Copyright 2001 Airespace, Inc. All rights reserved.
|
|
|
|
-- This SNMP Management Information Specification
|
|
-- embodies Airespace's confidential and proprietary
|
|
-- intellectual property. LVL7 Systems retains all title
|
|
-- and ownership in the Specification including any revisions.
|
|
|
|
-- This Specification is supplied "AS IS", Airespace
|
|
-- makes no warranty, either expressed or implied,
|
|
-- as to the use, operation, condition, or performance of the
|
|
-- Specification.
|
|
|
|
|
|
-- Status: Release
|
|
-- Version: 3.2
|
|
-- Internal Source Code Version:1.75
|
|
-- Date: 19 Dec 2005
|
|
-- *******************************************************************
|
|
|
|
|
|
AIRESPACE-SWITCHING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
|
|
Counter32, Integer32, Unsigned32, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
DisplayString, PhysAddress,
|
|
RowStatus, MacAddress, TruthValue FROM SNMPv2-TC
|
|
airespace FROM AIRESPACE-REF-MIB
|
|
dot1qVlanIndex, dot1qFdbId FROM Q-BRIDGE-MIB
|
|
IANAifType FROM IANAifType-MIB;
|
|
|
|
--********************************************************************
|
|
--* MODULE IDENTITY
|
|
--********************************************************************
|
|
|
|
bsnSwitching MODULE-IDENTITY
|
|
LAST-UPDATED "200604100000Z"
|
|
ORGANIZATION "Airespace, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems,
|
|
Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central Controllers (CC) that
|
|
terminate the Light Weight Access Point Protocol
|
|
tunnel from Light-weight LWAPP Access Points.
|
|
|
|
This MIB provides configuration, statistics and
|
|
status information about the controller.
|
|
This includes controller statistics and provides
|
|
information such as Inventory, Trap logs, memory and
|
|
CPU. This MIB also provides configuration of CLI,
|
|
SNMP, LAG, DHCP, Spanning Tree, etc.
|
|
|
|
The relationship between controller and the LWAPP APs
|
|
can be depicted as follows:
|
|
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ CC + + CC + + CC + + CC +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
.. . . .
|
|
.. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ AP + + AP + + AP + + AP + + AP +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ MN + + MN + + MN + + MN + + MN +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
|
|
|
|
The LWAPP tunnel exists between the controller and
|
|
the APs. The MNs communicate with the APs through
|
|
the protocol defined by the 802.11 standard.
|
|
|
|
LWAPP APs, upon bootup, discover and join one of the
|
|
controllers and the controller pushes the configuration,
|
|
that includes the WLAN parameters, to the LWAPP APs.
|
|
The APs then encapsulate all the 802.11 frames from
|
|
wireless clients inside LWAPP frames and forward
|
|
the LWAPP frames to the controller.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends it to the controller to which
|
|
it is logically connected.
|
|
|
|
Basic Service Set Identifier (BSSID)
|
|
|
|
The identifier for the service set comprising of
|
|
all the 802.11 stations under the control of
|
|
one coordinating Access Point. This identifier
|
|
happens to be the MAC address of the dot11 radio
|
|
interface of the Access Point. The wireless
|
|
clients that associate with the Access Point
|
|
get the wired uplink through this particular
|
|
dot11 interface.
|
|
|
|
Central Controller ( CC )
|
|
|
|
The central entity that terminates the LWAPP protocol
|
|
tunnel from the LWAPP APs. Throughout this MIB,
|
|
this entity also referred to as 'controller'.
|
|
|
|
Light Weight Access Point Protocol ( LWAPP )
|
|
|
|
This is a generic protocol that defines the
|
|
communication between the Access Points and the
|
|
Central Controller.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point.
|
|
|
|
Station Management (SMT)
|
|
|
|
This term refers to the internal management of the
|
|
802.11 protocol operations by the AP to work
|
|
cooperatively with the other APs and 802.11
|
|
devices in the network.
|
|
|
|
REFERENCE
|
|
|
|
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
|
|
and Physical Layer ( PHY ) Specifications.
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol. "
|
|
|
|
REVISION "200604100000Z"
|
|
|
|
DESCRIPTION
|
|
"Updated MIB with description and format"
|
|
|
|
::= { airespace 1 }
|
|
|
|
--********************************************************************
|
|
-- Major sections
|
|
--********************************************************************
|
|
|
|
agentInfoGroup OBJECT IDENTIFIER ::= { bsnSwitching 1 }
|
|
agentConfigGroup OBJECT IDENTIFIER ::= { bsnSwitching 2 }
|
|
agentSystemGroup OBJECT IDENTIFIER ::= { bsnSwitching 3 }
|
|
stats OBJECT IDENTIFIER ::= { bsnSwitching 4 }
|
|
switchingTraps OBJECT IDENTIFIER ::= { bsnSwitching 50 }
|
|
bsnSwitchingGroups OBJECT IDENTIFIER ::= { bsnSwitching 51 }
|
|
bsnSwitchingCompliances OBJECT IDENTIFIER ::= { bsnSwitching 52 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentInventoryGroup
|
|
--********************************************************************
|
|
|
|
|
|
agentInventoryGroup OBJECT IDENTIFIER ::= { agentInfoGroup 1 }
|
|
|
|
|
|
agentInventorySysDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Inventory system description."
|
|
::= { agentInventoryGroup 1 }
|
|
|
|
agentInventoryMachineType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the Machine used in the Switch."
|
|
::= { agentInventoryGroup 2 }
|
|
|
|
agentInventoryMachineModel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Machine Model. "
|
|
::= { agentInventoryGroup 3 }
|
|
|
|
agentInventorySerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial number of the switch."
|
|
::= { agentInventoryGroup 4 }
|
|
|
|
|
|
agentInventoryMaintenanceLevel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Inventory Maintenance Level"
|
|
::= { agentInventoryGroup 6 }
|
|
|
|
|
|
agentInventoryBurnedInMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Burned-In MAC Address"
|
|
|
|
::= { agentInventoryGroup 9 }
|
|
|
|
agentInventoryOperatingSystem OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operating System running on this unit"
|
|
::= { agentInventoryGroup 10 }
|
|
|
|
agentInventoryManufacturerName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the switch manufacturer."
|
|
::= { agentInventoryGroup 12 }
|
|
|
|
agentInventoryProductName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the product."
|
|
::= { agentInventoryGroup 13 }
|
|
|
|
agentInventoryProductVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Version of the product."
|
|
::= { agentInventoryGroup 14 }
|
|
|
|
agentInventoryIsGigECardPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if the Switch contains a Gigabit ethernet
|
|
card
|
|
."
|
|
::= { agentInventoryGroup 15 }
|
|
|
|
agentInventoryIsCryptoCardPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if the switch is carrying a Crypto card."
|
|
::= { agentInventoryGroup 16 }
|
|
|
|
agentInventoryIsForeignAPSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"States whether the switch supports third party
|
|
Access Points."
|
|
::= { agentInventoryGroup 17 }
|
|
|
|
|
|
agentInventoryMaxNumberOfAPsSupported OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of APs supported with this
|
|
Controller."
|
|
|
|
::= { agentInventoryGroup 18 }
|
|
|
|
agentInventoryIsCryptoCard2Present OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if the switch is carrying second Crypto
|
|
card for 4400 controller."
|
|
::= { agentInventoryGroup 19 }
|
|
|
|
agentInventoryFipsModeEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if FIPS (Federal Information Processing
|
|
Standards) mode has been enabled on the
|
|
controller.False if FIPS mode has not been
|
|
enabled. FIPS mode can only be enabled through
|
|
console."
|
|
DEFVAL {false}
|
|
::= { agentInventoryGroup 20 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTrapLogGroup
|
|
--********************************************************************
|
|
|
|
agentTrapLogGroup OBJECT IDENTIFIER ::= { agentInfoGroup 2}
|
|
|
|
agentTrapLogTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of traps sent since last
|
|
reset."
|
|
::= { agentTrapLogGroup 1 }
|
|
|
|
agentTrapLogTotalSinceLastViewed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of traps sent since last viewed."
|
|
::= { agentTrapLogGroup 3 }
|
|
|
|
agentRadioUpDownTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Up/Down traps sent since
|
|
last reset."
|
|
::= { agentTrapLogGroup 5 }
|
|
|
|
agentApAssociateDisassociateTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Associate/Disassociate
|
|
traps sent since last reset."
|
|
::= { agentTrapLogGroup 6 }
|
|
|
|
agentApLoadProfileFailTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Load Profile Failure
|
|
traps sent since last reset."
|
|
::= { agentTrapLogGroup 7 }
|
|
|
|
agentApNoiseProfileFailTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Noise Profile Failure
|
|
traps sent since last reset."
|
|
::= { agentTrapLogGroup 8 }
|
|
|
|
|
|
agentApInterferenceProfileFailTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Interference Profile
|
|
Failure traps sent since last reset."
|
|
::= { agentTrapLogGroup 9 }
|
|
|
|
agentApCoverageProfileFailTrapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of AP Coverge Profile Failure
|
|
traps sent since last reset."
|
|
::= { agentTrapLogGroup 10 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTrapLogTable
|
|
--********************************************************************
|
|
|
|
agentTrapLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentTrapLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Trap Log"
|
|
::= { agentTrapLogGroup 4 }
|
|
|
|
agentTrapLogEntry OBJECT-TYPE
|
|
SYNTAX AgentTrapLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent trap log entry"
|
|
INDEX { agentTrapLogIndex }
|
|
::= { agentTrapLogTable 1 }
|
|
|
|
AgentTrapLogEntry ::= SEQUENCE {
|
|
agentTrapLogIndex Integer32,
|
|
agentTrapLogSystemTime DisplayString,
|
|
agentTrapLogTrap OCTET STRING
|
|
}
|
|
|
|
agentTrapLogIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index of trap entry"
|
|
::= { agentTrapLogEntry 1 }
|
|
|
|
agentTrapLogSystemTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System uptime when trap was sent. This entry
|
|
shows how long the system has been up when the
|
|
trap occurred."
|
|
::= { agentTrapLogEntry 2 }
|
|
|
|
agentTrapLogTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description of the trap sent."
|
|
::= { agentTrapLogEntry 22 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSwitchInfoGroup
|
|
--********************************************************************
|
|
|
|
agentSwitchInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 3 }
|
|
|
|
|
|
agentSwitchInfoLwappTransportMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
layer2(1),
|
|
layer3(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LWAPP transport mode specifies if the switch
|
|
is operating in Layer2 or Layer3 mode. This
|
|
attribute gives the current mode the switch is
|
|
operating on."
|
|
::= { agentSwitchInfoGroup 1 }
|
|
|
|
agentSwitchInfoPowerSupply1Present OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the switch has Power
|
|
Supply 1 present on it. This is applicable to
|
|
the 4200 series and will always return true for
|
|
the earlier device versions."
|
|
::= { agentSwitchInfoGroup 2 }
|
|
|
|
agentSwitchInfoPowerSupply1Operational OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the switch's Power Supply
|
|
1 is operational. This is applicable to the
|
|
4200 series and will always return true for the
|
|
earlier device versions."
|
|
::= { agentSwitchInfoGroup 3 }
|
|
|
|
agentSwitchInfoPowerSupply2Present OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the switch has Power
|
|
Supply 2 present on it. This is applicable to
|
|
the 4200 series and will always return false for
|
|
the earlier device versions."
|
|
::= { agentSwitchInfoGroup 4 }
|
|
|
|
agentSwitchInfoPowerSupply2Operational OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the switch's Power Supply
|
|
2 is operational.This is applicable to the 4200
|
|
series and will always return false for the
|
|
earlier device versions."
|
|
::= { agentSwitchInfoGroup 5 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentResourceInfoGroup
|
|
--********************************************************************
|
|
|
|
agentResourceInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 5 }
|
|
|
|
agentCurrentCPUUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current CPU Load of the switch in percentage."
|
|
::= { agentResourceInfoGroup 1 }
|
|
|
|
agentTotalMemory OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total RAM of the switch in Kbytes."
|
|
::= { agentResourceInfoGroup 2 }
|
|
|
|
agentFreeMemory OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Free RAM of the switch in Kbytes."
|
|
::= { agentResourceInfoGroup 3 }
|
|
|
|
--********************************************************************
|
|
-- agentWcpInfoGroup
|
|
--********************************************************************
|
|
|
|
|
|
agentWcpInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 6 }
|
|
|
|
agentWcpDeviceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the name of the device this controller
|
|
is residing on."
|
|
::= { agentWcpInfoGroup 1 }
|
|
|
|
agentWcpSlotNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number on the Wcp Device that this
|
|
controller is residing on."
|
|
::= { agentWcpInfoGroup 2 }
|
|
|
|
agentWcpPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number on the Wcp Device that this
|
|
controller is residing on."
|
|
::= { agentWcpInfoGroup 3 }
|
|
|
|
agentWcpPeerPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of this controller's peer on the
|
|
same slot on Wcp Device that this controller is
|
|
residing on."
|
|
::= { agentWcpInfoGroup 4 }
|
|
|
|
agentWcpPeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of this controller's peer on the
|
|
same slot on Wcp Device that this controller is
|
|
residing on."
|
|
::= { agentWcpInfoGroup 5 }
|
|
|
|
agentWcpControllerTableChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the checksum that tracks the changes in
|
|
the agentWcpControllerInfoTable. If there is any
|
|
change in the information on this table, the
|
|
checksum changes."
|
|
::= { agentWcpInfoGroup 6 }
|
|
|
|
agentWcpControllerInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentWcpControllerInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the wireless controllers on a WCP
|
|
device."
|
|
::= { agentWcpInfoGroup 7 }
|
|
|
|
agentWcpControllerInfoEntry OBJECT-TYPE
|
|
SYNTAX AgentWcpControllerInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry for a wireless controller on a WCP
|
|
device."
|
|
INDEX { agentWcpControllerInfoSlotNumber,
|
|
agentWcpControllerInfoPortNumber }
|
|
::= { agentWcpControllerInfoTable 1 }
|
|
|
|
AgentWcpControllerInfoEntry ::= SEQUENCE {
|
|
agentWcpControllerInfoSlotNumber Unsigned32,
|
|
agentWcpControllerInfoPortNumber Unsigned32,
|
|
agentWcpControllerInfoIpAddress IpAddress
|
|
}
|
|
|
|
agentWcpControllerInfoSlotNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number on the Wcp device that a
|
|
controller is residing on."
|
|
::= { agentWcpControllerInfoEntry 1 }
|
|
|
|
agentWcpControllerInfoPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number on the Wcp Device that a
|
|
controller is residing on."
|
|
::= { agentWcpControllerInfoEntry 2 }
|
|
|
|
agentWcpControllerInfoIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management IP Address of a controller."
|
|
::= { agentWcpControllerInfoEntry 10 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentProductGroup
|
|
--********************************************************************
|
|
|
|
agentProductGroup OBJECT IDENTIFIER ::= { agentInfoGroup 4 }
|
|
|
|
--********************************************************************
|
|
-- productGroup1. This includes the 4000 switch series: 4012, 4024 and
|
|
-- the 4100 appliance series: 4101 and 4102
|
|
--********************************************************************
|
|
|
|
productGroup1 OBJECT IDENTIFIER ::= { agentProductGroup 1 }
|
|
|
|
--********************************************************************
|
|
-- productGroup2. This includes the Branch Office Switch series
|
|
--********************************************************************
|
|
|
|
productGroup2 OBJECT IDENTIFIER ::= { agentProductGroup 2 }
|
|
|
|
--********************************************************************
|
|
-- productGroup3. This includes the 4200 switch series: 4202 and 4204
|
|
--
|
|
--********************************************************************
|
|
|
|
productGroup3 OBJECT IDENTIFIER ::= { agentProductGroup 3 }
|
|
|
|
--********************************************************************
|
|
-- productGroup4. This includes the Catalyst 6k series with 2
|
|
-- 4204s on a single blade
|
|
--********************************************************************
|
|
|
|
productGroup4 OBJECT IDENTIFIER ::= { agentProductGroup 4 }
|
|
|
|
--********************************************************************
|
|
agentCLIConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 1 }
|
|
|
|
--********************************************************************
|
|
-- agentLoginSessionTable
|
|
--********************************************************************
|
|
|
|
agentLoginSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLoginSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's login session"
|
|
::= { agentCLIConfigGroup 1 }
|
|
|
|
agentLoginSessionEntry OBJECT-TYPE
|
|
SYNTAX AgentLoginSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Login Session Entry"
|
|
INDEX { agentLoginSessionIndex }
|
|
::= { agentLoginSessionTable 1 }
|
|
|
|
AgentLoginSessionEntry ::= SEQUENCE {
|
|
agentLoginSessionIndex Integer32,
|
|
agentLoginSessionUserName DisplayString,
|
|
agentLoginSessionIPAddress IpAddress,
|
|
agentLoginSessionConnectionType INTEGER,
|
|
agentLoginSessionIdleTime TimeTicks,
|
|
agentLoginSessionSessionTime TimeTicks,
|
|
agentLoginSessionStatus RowStatus
|
|
}
|
|
|
|
agentLoginSessionIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session Index of the switch"
|
|
::= { agentLoginSessionEntry 1 }
|
|
|
|
agentLoginSessionUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session UserName of the switch"
|
|
::= { agentLoginSessionEntry 2 }
|
|
|
|
agentLoginSessionIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session IP Address of the switch"
|
|
::= { agentLoginSessionEntry 3 }
|
|
|
|
agentLoginSessionConnectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
serial(1),
|
|
telnet(2),
|
|
web(3),
|
|
ssl(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session Connection Type of the
|
|
switch"
|
|
::= { agentLoginSessionEntry 4 }
|
|
|
|
agentLoginSessionIdleTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session Idle Time of the switch"
|
|
::= { agentLoginSessionEntry 5 }
|
|
|
|
agentLoginSessionSessionTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Login Session Time of the switch"
|
|
::= { agentLoginSessionEntry 6 }
|
|
|
|
agentLoginSessionStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the user.
|
|
active(1) - This connection is active.
|
|
destroy(6) - Set to this value to disconnect
|
|
this user."
|
|
::= { agentLoginSessionEntry 26 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTelnetConfigGroup
|
|
--********************************************************************
|
|
|
|
agentTelnetConfigGroup OBJECT IDENTIFIER ::= {agentCLIConfigGroup 2}
|
|
|
|
agentTelnetLoginTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0..160)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Telnet login timeout (minutes)
|
|
Config telnet timeout will set the telnet
|
|
session timeout value. A session is active as
|
|
long as the session has not remained idle for
|
|
the value set. Specify a value from 0 to 160.
|
|
A value of 0 indicates that a Telnet session
|
|
remains active indefinitely.
|
|
Note: Changing the timeout value for active
|
|
sessions does not become effective until the
|
|
session is reaccessed. Any keystroke will
|
|
also activate the new timeout duration."
|
|
::= { agentTelnetConfigGroup 1 }
|
|
|
|
agentTelnetMaxSessions OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of Telnet Sessions
|
|
Config telnet maxsessions is an integer value
|
|
from 0 to 5 that specifies the maximum number of
|
|
telnet sessions that can be established. If the
|
|
value is 0, no Telnet session can be established."
|
|
::= { agentTelnetConfigGroup 2 }
|
|
|
|
agentTelnetAllowNewMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow new telnet sessions (enable or disable)
|
|
Config telnet disable means that no new Telnet
|
|
sessions are to be established. Any already
|
|
established session remains active until
|
|
the session is ended or an abnormal network error
|
|
ends it. "
|
|
::= { agentTelnetConfigGroup 3 }
|
|
|
|
agentSSHAllowNewMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow new SSH sessions (enable or disable)
|
|
Config SSH disable means that no new SSH sessions
|
|
are to be established. Any already established
|
|
session remains active until the session is ended
|
|
or an abnormal network error ends it."
|
|
::= { agentTelnetConfigGroup 4 }
|
|
|
|
--********************************************************************
|
|
-- agentSerialGroup
|
|
--********************************************************************
|
|
|
|
agentSerialGroup OBJECT IDENTIFIER ::= { agentCLIConfigGroup 5 }
|
|
|
|
agentSerialTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent Serial Timeout "
|
|
::= { agentSerialGroup 1 }
|
|
|
|
agentSerialBaudrate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
baud1200(1),
|
|
baud2400(2),
|
|
baud4800(3),
|
|
baud9600(4),
|
|
baud19200(5),
|
|
baud38400(6),
|
|
baud57600(7),
|
|
baud115200(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Baudrate"
|
|
::= { agentSerialGroup 2 }
|
|
|
|
agentSerialCharacterSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Character Size"
|
|
::= { agentSerialGroup 3 }
|
|
|
|
agentSerialHWFlowControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Hardware Flow Control."
|
|
::= { agentSerialGroup 4 }
|
|
|
|
agentSerialStopBits OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Stop Bits"
|
|
::= { agentSerialGroup 5 }
|
|
|
|
agentSerialParityType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
even(1),
|
|
odd(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Agent Serial Parity Type"
|
|
::= { agentSerialGroup 6 }
|
|
|
|
--*******************************************************************
|
|
-- agentLagConfigGroup
|
|
--********************************************************************
|
|
agentLagConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 2 }
|
|
|
|
agentLagConfigCreate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..15))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Create.
|
|
When this object is set with a non-empty string,
|
|
a new lag will be created.if possible with the
|
|
entered string as it's name."
|
|
::= { agentLagConfigGroup 1 }
|
|
|
|
agentLagSummaryConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLagSummaryConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A summary table of the switch's lag config
|
|
entries"
|
|
::= { agentLagConfigGroup 2 }
|
|
|
|
agentLagSummaryConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentLagSummaryConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Switch's lag config entry"
|
|
INDEX { agentLagSummaryName }
|
|
::= { agentLagSummaryConfigTable 1 }
|
|
|
|
AgentLagSummaryConfigEntry ::= SEQUENCE {
|
|
agentLagSummaryName DisplayString,
|
|
agentLagSummaryLagIndex Integer32,
|
|
agentLagSummaryFlushTimer Integer32,
|
|
agentLagSummaryLinkTrap INTEGER,
|
|
agentLagSummaryAdminMode INTEGER,
|
|
agentLagSummaryStpMode INTEGER,
|
|
agentLagSummaryAddPort Integer32,
|
|
agentLagSummaryDeletePort Integer32,
|
|
agentLagSummaryPortsBitMask Unsigned32,
|
|
agentLagSummaryStatus RowStatus
|
|
}
|
|
agentLagSummaryName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..15))
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Name"
|
|
::= { agentLagSummaryConfigEntry 1 }
|
|
|
|
agentLagSummaryLagIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag If Index"
|
|
::= { agentLagSummaryConfigEntry 2 }
|
|
|
|
|
|
agentLagSummaryFlushTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Flush Timer"
|
|
::= { agentLagSummaryConfigEntry 3 }
|
|
|
|
agentLagSummaryLinkTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Link Trap"
|
|
::= { agentLagSummaryConfigEntry 4 }
|
|
|
|
agentLagSummaryAdminMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Admin Mode"
|
|
::= { agentLagSummaryConfigEntry 5 }
|
|
|
|
agentLagSummaryStpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1d(1),
|
|
fast(2),
|
|
off(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag STP Mode"
|
|
::= { agentLagSummaryConfigEntry 6 }
|
|
|
|
agentLagSummaryAddPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Add Port.
|
|
Note: agentPortType for the port to be added
|
|
must be full duplex and the same speed as
|
|
previously added port(s), if any."
|
|
::= { agentLagSummaryConfigEntry 7 }
|
|
|
|
agentLagSummaryDeletePort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Delete Port"
|
|
::= { agentLagSummaryConfigEntry 8 }
|
|
|
|
agentLagSummaryPortsBitMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Member Ports in bit mask
|
|
representation"
|
|
::= { agentLagSummaryConfigEntry 9 }
|
|
|
|
agentLagSummaryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Agent Lag Status.
|
|
active(1) - This Lag is enabled.
|
|
destroy(6) - Set to this value to remove the
|
|
Lag."
|
|
::= { agentLagSummaryConfigEntry 30 }
|
|
|
|
|
|
--*******************************************************************
|
|
-- agentLagDetailedConfigTable
|
|
--*******************************************************************
|
|
|
|
agentLagDetailedConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLagDetailedConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A detailed table of the switch's lag config
|
|
entries"
|
|
::= { agentLagConfigGroup 3 }
|
|
|
|
agentLagDetailedConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentLagDetailedConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Switch's lag config entry"
|
|
INDEX { agentLagDetailedLagIndex,
|
|
agentLagDetailedIfIndex }
|
|
::= { agentLagDetailedConfigTable 1 }
|
|
|
|
AgentLagDetailedConfigEntry ::= SEQUENCE {
|
|
agentLagDetailedLagIndex Integer32,
|
|
agentLagDetailedIfIndex Integer32,
|
|
agentLagDetailedPortSpeed OBJECT IDENTIFIER
|
|
}
|
|
|
|
agentLagDetailedLagIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Lag index"
|
|
::= { agentLagDetailedConfigEntry 1 }
|
|
|
|
agentLagDetailedIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Lag port index"
|
|
::= { agentLagDetailedConfigEntry 2 }
|
|
|
|
agentLagDetailedPortSpeed OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Lag port speed. See agentPortType for
|
|
description and list of valid values."
|
|
::= { agentLagDetailedConfigEntry 22 }
|
|
|
|
|
|
agentLagConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Lag Mode on the 4400 series controller. When
|
|
it is on, all the gigabit ports are bound to one
|
|
aggregated link."
|
|
::= { agentLagConfigGroup 4 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentNetworkConfigGroup
|
|
--********************************************************************
|
|
|
|
agentNetworkConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 3 }
|
|
|
|
agentNetworkIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's network ip address"
|
|
::= { agentNetworkConfigGroup 1 }
|
|
|
|
agentNetworkSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's network subnet mask"
|
|
::= { agentNetworkConfigGroup 2 }
|
|
|
|
agentNetworkDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's network default gateway"
|
|
::= { agentNetworkConfigGroup 3 }
|
|
|
|
agentNetworkBurnedInMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Burned-In MAC address"
|
|
::= { agentNetworkConfigGroup 4 }
|
|
|
|
agentNetworkConfigProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
bootp(2),
|
|
dhcp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's network config protocol"
|
|
::= { agentNetworkConfigGroup 7 }
|
|
|
|
agentNetworkWebMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's web access mode."
|
|
::= { agentNetworkConfigGroup 8 }
|
|
|
|
agentNetworkSecureWebMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If https is enable or not provided web mode is
|
|
enabled"
|
|
::= { agentNetworkConfigGroup 9 }
|
|
|
|
agentNetworkMulticastMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
unicast(1),
|
|
multicast(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's ethernet multicast support.
|
|
disable- multicast is disabled
|
|
multicast - Multicast is enabled.
|
|
unicast- Controller will convert multicast to
|
|
unicast packet."
|
|
::= { agentNetworkConfigGroup 10 }
|
|
|
|
agentNetworkDsPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's distribution port number."
|
|
::= { agentNetworkConfigGroup 11 }
|
|
|
|
agentNetworkUserIdleTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(10..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the idle user timeout."
|
|
::= { agentNetworkConfigGroup 12 }
|
|
|
|
|
|
agentNetworkArpTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(10..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the ARP entry timeout."
|
|
::= { agentNetworkConfigGroup 13 }
|
|
|
|
agentNetworkManagementVlan OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID of the network management interface."
|
|
::= { agentNetworkConfigGroup 14 }
|
|
|
|
agentNetworkGvrpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(0) }
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The state of GVRP operation on the Switch. The value
|
|
enabled(1) indicates that GVRP is enabled on this port,
|
|
as long as dot1qGvrpStatus is also enabled for this
|
|
device. When disabled(2) but dot1qGvrpStatus is still
|
|
enabled for the device, GVRP is disabled on this port:
|
|
any GVRP packets received will be silently discarded and
|
|
no GVRP registrations will be propagated from other
|
|
ports. This object affects all GVRP Applicant and
|
|
Registrar state machines on this port. A transition
|
|
from disabled(2) to enabled(1) will cause a reset of all
|
|
GVRP state machines on this port.(Attribute No longer
|
|
supported)"
|
|
DEFVAL { enabled }
|
|
::= { agentNetworkConfigGroup 15 }
|
|
|
|
agentNetworkAllowMgmtViaWireless OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(1),disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This states whether Management via wireless is
|
|
allowed or not."
|
|
::= { agentNetworkConfigGroup 16 }
|
|
|
|
agentNetworkBroadcastSsidMode OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(1),disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mode when enabled allows WLAN SSIDs to be
|
|
broadcasted."
|
|
::= { agentNetworkConfigGroup 17 }
|
|
|
|
agentNetworkSecureWebPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SSL Certificate Password. This can be optionally
|
|
set while downloading SSL certificates of type
|
|
Web Admin and Web Authentication"
|
|
::= { agentNetworkConfigGroup 18 }
|
|
|
|
agentNetworkWebAdminCertType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of currently existing Web Admin Certificate
|
|
installed on the Switch. It could be 'Empty' if the
|
|
certificate is not present, 'Locally Generated' if
|
|
the certificate is locally generated or it could
|
|
have a name if it is downloaded externally."
|
|
::= { agentNetworkConfigGroup 19 }
|
|
|
|
agentNetworkWebAdminCertRegenerateCmdInvoke OBJECT-TYPE
|
|
SYNTAX INTEGER { default (0), activate (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This command when set to 'activate' will regenerate
|
|
a Web Administration Certificate Locally that will
|
|
replace the existing certificate."
|
|
::= { agentNetworkConfigGroup 20 }
|
|
|
|
agentNetworkWebAuthCertType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of currently exisitng Web Authentication
|
|
Certificate installed on the Switch. It could be
|
|
'Empty' if the certificate is not present, 'Locally
|
|
Generated' if the certificate is locally generated or
|
|
it could have a name if it is downloaded externally."
|
|
::= { agentNetworkConfigGroup 21 }
|
|
|
|
agentNetworkWebAuthCertRegenerateCmdInvoke OBJECT-TYPE
|
|
SYNTAX INTEGER { default (0), activate (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This command when set to 'activate' will regenerate a
|
|
Web Authentication Certificate Locally that will
|
|
replace the existing certificate."
|
|
::= { agentNetworkConfigGroup 22 }
|
|
|
|
agentNetworkPeerToPeerBlockingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {enable(1),disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mobile Peer to Peer Blocking mode on the switch."
|
|
::= { agentNetworkConfigGroup 24 }
|
|
|
|
agentNetworkMulticastGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast group address for access points."
|
|
::= { agentNetworkConfigGroup 25 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentNeworkRouteTable
|
|
--********************************************************************
|
|
|
|
agentNetworkRouteConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentNetworkRouteConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's Network Route entries"
|
|
::= { agentNetworkConfigGroup 23 }
|
|
|
|
agentNetworkRouteConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentNetworkRouteConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's Network Route entry"
|
|
INDEX {agentNetworkRouteIPAddress }
|
|
::= { agentNetworkRouteConfigTable 1 }
|
|
|
|
AgentNetworkRouteConfigEntry ::= SEQUENCE {
|
|
agentNetworkRouteIPAddress IpAddress,
|
|
agentNetworkRouteIPNetmask IpAddress,
|
|
agentNetworkRouteGateway IpAddress,
|
|
agentNetworkRouteStatus RowStatus
|
|
}
|
|
|
|
agentNetworkRouteIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Route IP Address."
|
|
::= { agentNetworkRouteConfigEntry 1 }
|
|
|
|
agentNetworkRouteIPNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Network Route IP Netmask."
|
|
::= { agentNetworkRouteConfigEntry 2 }
|
|
|
|
agentNetworkRouteGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Network Route IP Gateway."
|
|
::= { agentNetworkRouteConfigEntry 3 }
|
|
|
|
agentNetworkRouteStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Route Row Status."
|
|
::= { agentNetworkRouteConfigEntry 23 }
|
|
|
|
|
|
|
|
--********************************************************************
|
|
-- agentInterfaceConfigTable
|
|
--********************************************************************
|
|
|
|
agentInterfaceConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentInterfaceConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's Interface Config entries
|
|
Typically, it will contain entries for Service
|
|
Port Interface, DS Port Interface and Virtual
|
|
Gateway Interface apart from other entries."
|
|
::= { agentConfigGroup 13 }
|
|
|
|
agentInterfaceConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentInterfaceConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's Interface Config entry"
|
|
INDEX { agentInterfaceName }
|
|
::= { agentInterfaceConfigTable 1 }
|
|
|
|
AgentInterfaceConfigEntry ::= SEQUENCE {
|
|
agentInterfaceName OCTET STRING,
|
|
agentInterfaceVlanId Integer32,
|
|
agentInterfaceType INTEGER,
|
|
agentInterfaceMacAddress MacAddress,
|
|
agentInterfaceIPAddress IpAddress,
|
|
agentInterfaceIPNetmask IpAddress,
|
|
agentInterfaceIPGateway IpAddress,
|
|
agentInterfacePortNo Integer32,
|
|
agentInterfaceActivePortNo Integer32,
|
|
agentInterfaceBackupPortNo Integer32,
|
|
agentInterfacePrimaryDhcpAddress IpAddress,
|
|
agentInterfaceSecondaryDhcpAddress IpAddress,
|
|
agentInterfaceDhcpProtocol INTEGER,
|
|
agentInterfaceDnsHostName DisplayString,
|
|
agentInterfaceAclName DisplayString,
|
|
agentInterfaceAPManagementFeature INTEGER,
|
|
agentInterfaceRowStatus RowStatus,
|
|
agentInterfaceVlanQuarantine TruthValue
|
|
}
|
|
|
|
agentInterfaceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interace Name. This values is 'management' for DS
|
|
port, 'service-port' for service port and 'virtual'
|
|
for virtual gateway. For other interfaces, the name
|
|
can be anything. These interfaces are already created
|
|
by default."
|
|
::= { agentInterfaceConfigEntry 1 }
|
|
|
|
agentInterfaceVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan ID configured for the Interface."
|
|
DEFVAL{ 0 }
|
|
::= { agentInterfaceConfigEntry 2 }
|
|
|
|
agentInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(0),
|
|
dynamic(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface's type. The static type is set for
|
|
the interfaces that are created by default on the
|
|
switch and these cannot be deleted. Any other
|
|
interface that is created is of type dynamic
|
|
which can be deleted."
|
|
::= { agentInterfaceConfigEntry 3 }
|
|
|
|
agentInterfaceMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface MAC Address. This is only applicable in
|
|
case of management and service-port interfaces."
|
|
::= { agentInterfaceConfigEntry 4 }
|
|
|
|
agentInterfaceIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the interface."
|
|
::= { agentInterfaceConfigEntry 5 }
|
|
|
|
agentInterfaceIPNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Netmask of the interface. This is 0 for the
|
|
virtual interface."
|
|
::= { agentInterfaceConfigEntry 6 }
|
|
|
|
agentInterfaceIPGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Gateway of the interface. This is 0 for virtual
|
|
and service-port interface."
|
|
::= { agentInterfaceConfigEntry 7 }
|
|
|
|
agentInterfacePortNo OBJECT-TYPE
|
|
SYNTAX Integer32(0..25)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value 0 means the port is not set. The valid value
|
|
can be any one of the physical ports on the switch.
|
|
This is the primary port configured on the
|
|
interface."
|
|
DEFVAL{ 0 }
|
|
::= { agentInterfaceConfigEntry 8 }
|
|
|
|
agentInterfacePrimaryDhcpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary DHCP Server IP Address for the interface
|
|
This applies to the management interface and other
|
|
dynamic interfaces."
|
|
::= { agentInterfaceConfigEntry 9 }
|
|
|
|
agentInterfaceSecondaryDhcpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary DHCP Server IP Address for the interface.
|
|
This applies to the management interface and other
|
|
dynamic interfaces."
|
|
::= { agentInterfaceConfigEntry 10 }
|
|
|
|
agentInterfaceDhcpProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface's DHCP protocol. This applies only
|
|
to the service port interface."
|
|
::= { agentInterfaceConfigEntry 11 }
|
|
|
|
agentInterfaceDnsHostName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS host name for the Virtual Interface.
|
|
This attribute is not valid for other
|
|
interfaces."
|
|
::= { agentInterfaceConfigEntry 12 }
|
|
|
|
agentInterfaceAclName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Access Control List applied to the
|
|
interface. This attribute is applicable only to
|
|
the management interface and other dynamic
|
|
interfaces. If it is required to remove the ACL
|
|
name for an interface, it should be set to an
|
|
empty string."
|
|
::= { agentInterfaceConfigEntry 13 }
|
|
|
|
agentInterfaceAPManagementFeature OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, the dynamic interface can be used for AP
|
|
management. SNMP support for AP management through
|
|
dynamic interfaces has been introduced since '3.0.21.0'
|
|
release. Only applicable to dynamic interfaces in 4200
|
|
series. In static interfaces, 'disable' value 0
|
|
is returned. In 4000/3500 series of switches, 'disable'
|
|
value 0 is returned."
|
|
::= { agentInterfaceConfigEntry 14 }
|
|
|
|
agentInterfaceActivePortNo OBJECT-TYPE
|
|
SYNTAX Integer32(0..25)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the currently active port for this
|
|
interface."
|
|
DEFVAL{ 0 }
|
|
::= { agentInterfaceConfigEntry 15 }
|
|
|
|
agentInterfaceBackupPortNo OBJECT-TYPE
|
|
SYNTAX Integer32(0..4)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This values is valid only for the 4200 series of
|
|
switches. The backup port is the port this interface
|
|
is moved to once the primary port fails. A value 0
|
|
means the port is not set. The valid value can be
|
|
any one of the physical ports on the 4200 switch."
|
|
DEFVAL{ 0 }
|
|
::= { agentInterfaceConfigEntry 16 }
|
|
|
|
agentInterfaceVlanQuarantine OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the health of the
|
|
interface identified by agentInterfaceName.
|
|
|
|
A value of 'true' is used to indicate that this
|
|
particular interface is unhealthy. In this case,
|
|
the data packets of the clients, that are assigned
|
|
the VLAN Id corresponding to this interface, must
|
|
be tunneled to the Controller by the REAP AP.
|
|
|
|
A value of 'false' indicates that the VLAN configured
|
|
against the interface is healthy and that the REAP
|
|
AP can switch the clients of this VLAN locally rather
|
|
than tunneling them to the Controller. "
|
|
DEFVAL { false }
|
|
::= { agentInterfaceConfigEntry 17 }
|
|
|
|
agentInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface entry Row status."
|
|
::= { agentInterfaceConfigEntry 31 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentNtpConfigGroup - Configuration of Switch Network Time Protocol
|
|
--********************************************************************
|
|
agentNtpConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 14 }
|
|
|
|
agentNtpPollingInterval OBJECT-TYPE
|
|
SYNTAX Integer32(3600..604800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Time Protocol polling interval. Min value
|
|
is one hour and maximum is a week."
|
|
::= { agentNtpConfigGroup 1 }
|
|
|
|
--********************************************************************
|
|
-- agentNtpServerTable - Configuration of Network Time Protocol Server
|
|
--********************************************************************
|
|
|
|
agentNtpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentNtpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A summary table for switch's lag config entries"
|
|
::= { agentNtpConfigGroup 2 }
|
|
|
|
agentNtpServerEntry OBJECT-TYPE
|
|
SYNTAX AgentNtpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's NTP Server entry. Upto 4 entries may be
|
|
added."
|
|
INDEX { agentNtpServerIndex }
|
|
::= { agentNtpServerTable 1 }
|
|
|
|
AgentNtpServerEntry ::= SEQUENCE {
|
|
agentNtpServerIndex Integer32,
|
|
agentNtpServerAddress IpAddress,
|
|
agentNtpServerRowStatus RowStatus
|
|
}
|
|
|
|
agentNtpServerIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP Server priority index."
|
|
::= { agentNtpServerEntry 1 }
|
|
|
|
|
|
agentNtpServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the NTP Server"
|
|
::= { agentNtpServerEntry 2 }
|
|
|
|
agentNtpServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP server entry row status."
|
|
::= { agentNtpServerEntry 20 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentDhcpConfigGroup - Configuration of Switch DHCP Server and
|
|
-- its Scopes
|
|
--********************************************************************
|
|
agentDhcpConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 15 }
|
|
|
|
agentDhcpScopeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDhcpScopeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table listing the Scopes defined on the
|
|
switch's DHCP Server."
|
|
::= { agentDhcpConfigGroup 1 }
|
|
|
|
agentDhcpScopeEntry OBJECT-TYPE
|
|
SYNTAX AgentDhcpScopeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's DHCP Server Scope entry."
|
|
INDEX { agentDhcpScopeIndex }
|
|
::= { agentDhcpScopeTable 1 }
|
|
|
|
AgentDhcpScopeEntry ::= SEQUENCE {
|
|
agentDhcpScopeIndex Unsigned32,
|
|
agentDhcpScopeName DisplayString,
|
|
agentDhcpScopeLeaseTime Integer32,
|
|
agentDhcpScopeNetwork IpAddress,
|
|
agentDhcpScopeNetmask IpAddress,
|
|
agentDhcpScopePoolStartAddress IpAddress,
|
|
agentDhcpScopePoolEndAddress IpAddress,
|
|
agentDhcpScopeDefaultRouterAddress1 IpAddress,
|
|
agentDhcpScopeDefaultRouterAddress2 IpAddress,
|
|
agentDhcpScopeDefaultRouterAddress3 IpAddress,
|
|
agentDhcpScopeDnsDomainName DisplayString,
|
|
agentDhcpScopeDnsServerAddress1 IpAddress,
|
|
agentDhcpScopeDnsServerAddress2 IpAddress,
|
|
agentDhcpScopeDnsServerAddress3 IpAddress,
|
|
agentDhcpScopeNetbiosNameServerAddress1 IpAddress,
|
|
agentDhcpScopeNetbiosNameServerAddress2 IpAddress,
|
|
agentDhcpScopeNetbiosNameServerAddress3 IpAddress,
|
|
agentDhcpScopeState INTEGER,
|
|
agentDhcpScopeRowStatus RowStatus
|
|
}
|
|
|
|
agentDhcpScopeIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Scope Identifier Index."
|
|
::= { agentDhcpScopeEntry 1 }
|
|
|
|
agentDhcpScopeName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..79))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Scope Name."
|
|
::= { agentDhcpScopeEntry 2 }
|
|
|
|
agentDhcpScopeLeaseTime OBJECT-TYPE
|
|
SYNTAX Integer32(120..8640000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Scope Lease time in seconds."
|
|
::= { agentDhcpScopeEntry 3 }
|
|
|
|
agentDhcpScopeNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope Network. This is
|
|
the address which is used to determine the DHCP
|
|
scope a remote Switch is attaching to."
|
|
::= { agentDhcpScopeEntry 4 }
|
|
|
|
agentDhcpScopeNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP Scope Netmask. This the subnet mask for
|
|
the address pool."
|
|
::= { agentDhcpScopeEntry 5 }
|
|
|
|
agentDhcpScopePoolStartAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP Scope address pool start IP address."
|
|
::= { agentDhcpScopeEntry 6 }
|
|
|
|
agentDhcpScopePoolEndAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP Scope address pool end IP address."
|
|
::= { agentDhcpScopeEntry 7 }
|
|
|
|
agentDhcpScopeDefaultRouterAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's default Router
|
|
1."
|
|
::= { agentDhcpScopeEntry 8 }
|
|
|
|
agentDhcpScopeDefaultRouterAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's default Router
|
|
2."
|
|
::= { agentDhcpScopeEntry 9 }
|
|
|
|
agentDhcpScopeDefaultRouterAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's default Router
|
|
3."
|
|
::= { agentDhcpScopeEntry 10 }
|
|
|
|
agentDhcpScopeDnsDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..79))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Domain name for the DHCP Scope."
|
|
::= { agentDhcpScopeEntry 11 }
|
|
|
|
agentDhcpScopeDnsServerAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's DNS Server 1."
|
|
::= { agentDhcpScopeEntry 12 }
|
|
|
|
agentDhcpScopeDnsServerAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's DNS Server 2."
|
|
::= { agentDhcpScopeEntry 13 }
|
|
|
|
agentDhcpScopeDnsServerAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the DHCP Scope's DNS Server 3."
|
|
::= { agentDhcpScopeEntry 14 }
|
|
|
|
agentDhcpScopeNetbiosNameServerAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of DHCP Scope's Netbios Name Server
|
|
1."
|
|
::= { agentDhcpScopeEntry 15 }
|
|
|
|
agentDhcpScopeNetbiosNameServerAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of DHCP Scope's Netbios Name Server
|
|
2."
|
|
::= { agentDhcpScopeEntry 16 }
|
|
|
|
agentDhcpScopeNetbiosNameServerAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of DHCP Scope's Netbios Name Server
|
|
3."
|
|
::= { agentDhcpScopeEntry 17 }
|
|
|
|
agentDhcpScopeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Scope's State."
|
|
::= { agentDhcpScopeEntry 18 }
|
|
|
|
agentDhcpScopeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dhcp Scope entry row status."
|
|
::= { agentDhcpScopeEntry 30 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentServicePortConfigGroup
|
|
-- (Interface of type service-port in agentInterfaceConfigTable
|
|
-- use is recommended instead of this group.)
|
|
--********************************************************************
|
|
|
|
agentServicePortConfigGroup OBJECT IDENTIFIER ::=
|
|
{ agentConfigGroup 4 }
|
|
|
|
agentServicePortIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The switch's Service Port IP address.
|
|
(Service-port interface use is recommended
|
|
instead
|
|
of this group)"
|
|
::= { agentServicePortConfigGroup 1 }
|
|
|
|
agentServicePortSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The switch's Service Port subnet mask.
|
|
(Service-port interface in
|
|
agentInterfaceConfigTable is recommended
|
|
instead
|
|
of this group)"
|
|
::= { agentServicePortConfigGroup 2 }
|
|
|
|
agentServicePortDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Not Supported for release 1.0. The switch's
|
|
Service Port default gateway. (Service-port
|
|
interface in agentInterfaceConfigTable is
|
|
recommended instead of this group)"
|
|
::= { agentServicePortConfigGroup 3 }
|
|
|
|
agentServicePortBurnedInMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The switch's Service Port Burned-In MAC address
|
|
(Service-port interface in
|
|
agentInterfaceConfigTable is recommended
|
|
instead
|
|
of this group)"
|
|
::= { agentServicePortConfigGroup 4 }
|
|
|
|
agentServicePortConfigProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
dhcp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The switch's Service Port config protocol
|
|
(Service-port interface in
|
|
agentInterfaceConfigTable is recommended
|
|
instead
|
|
of this group)"
|
|
::= { agentServicePortConfigGroup 5 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSnmpConfigGroup
|
|
--********************************************************************
|
|
|
|
agentSnmpConfigGroup OBJECT IDENTIFIER ::= {agentConfigGroup 5}
|
|
|
|
|
|
agentSnmpTrapPortNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..65534)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snmp Trap Port Number"
|
|
::= { agentSnmpConfigGroup 1 }
|
|
|
|
agentSnmpVersion1Status OBJECT-TYPE
|
|
SYNTAX INTEGER{disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snmp Version 1 Status"
|
|
::= { agentSnmpConfigGroup 2 }
|
|
|
|
agentSnmpVersion2cStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snmp Version 2c Status"
|
|
::= { agentSnmpConfigGroup 3 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSnmpCommunityConfigTable
|
|
--********************************************************************
|
|
agentSnmpCommunityConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSnmpCommunityConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's SNMP community Config
|
|
entries"
|
|
::= { agentSnmpConfigGroup 5 }
|
|
|
|
agentSnmpCommunityConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentSnmpCommunityConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's SNMP community Config entry"
|
|
INDEX {agentSnmpCommunityName }
|
|
::= { agentSnmpCommunityConfigTable 1 }
|
|
|
|
AgentSnmpCommunityConfigEntry ::= SEQUENCE {
|
|
agentSnmpCommunityName DisplayString,
|
|
agentSnmpCommunityIPAddress IpAddress,
|
|
agentSnmpCommunityIPMask IpAddress,
|
|
agentSnmpCommunityAccessMode INTEGER,
|
|
agentSnmpCommunityEnabled INTEGER,
|
|
agentSnmpCommunityStatus RowStatus
|
|
}
|
|
|
|
agentSnmpCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community Name
|
|
This name identifies each SNMP community;
|
|
the name can be up to 16 characters, and it is
|
|
case-sensitive. Community names in the SNMP
|
|
community must be unique. If you make multiple
|
|
entries using the same community name, the first
|
|
entry is kept and processed and all duplicate
|
|
entries are ignored. "
|
|
::= { agentSnmpCommunityConfigEntry 1 }
|
|
|
|
agentSnmpCommunityIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community IP Address
|
|
Client IP Address - This attribute is an IP
|
|
address (or portion thereof) from which this
|
|
device will accept SNMP packets with the
|
|
associated community. The requesting entity's IP
|
|
address is logical-ANDed with the Client IP Mask
|
|
and the result must match the Client IP Address.
|
|
Note: If the Client IP Mask is set to 0.0.0.0, a
|
|
Client IP Address of 0.0.0.0 matches all IP
|
|
addresses."
|
|
::= { agentSnmpCommunityConfigEntry 2 }
|
|
|
|
agentSnmpCommunityIPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community
|
|
IP Mask Client IP Mask - This attribute is a mask
|
|
to be logical-ANDed with the requesting entity's
|
|
IP address before comparison with the Client IP
|
|
Address. If the result matches with Client IP
|
|
Address then the address is an authenticated IP
|
|
address. For example, if the Client IP Address
|
|
is 9.47.128.0 and the corresponding Client IP
|
|
Mask is 255.255.255.0, a range of incoming IP
|
|
addresses would match, that is, the incoming IP
|
|
addresses could be a value in the following
|
|
range: 9.47.128.0 to 9.47.128.255. To have a
|
|
specific IP address be the only authenticated IP
|
|
address, set the Client IP Address to the
|
|
required IP address and set the Client IP Mask to
|
|
255.255.255.255."
|
|
::= { agentSnmpCommunityConfigEntry 3 }
|
|
|
|
agentSnmpCommunityAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readOnly(1),
|
|
readWrite(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community Access Mode
|
|
Access Mode - This value can be readOnly or
|
|
readWrite. A community with a read-only access
|
|
allows for switch information to be displayed.
|
|
A community with a readWrite access allows for
|
|
configuration changes to be made and for
|
|
information to be displayed. "
|
|
DEFVAL {readOnly}
|
|
::= { agentSnmpCommunityConfigEntry 4 }
|
|
|
|
agentSnmpCommunityEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If community is Enabled "
|
|
DEFVAL { no }
|
|
::= { agentSnmpCommunityConfigEntry 5 }
|
|
|
|
agentSnmpCommunityStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Community Status.
|
|
active(1) - This community is active,
|
|
allowing SNMP manager
|
|
associated
|
|
with this community to manage
|
|
the switch according to its
|
|
access right.
|
|
|
|
notInService(2) - This community is not active;
|
|
no
|
|
SNMP requests using this
|
|
community will be accepted. In
|
|
this case the SNMP manager
|
|
associated with this community
|
|
cannot manage the switch until
|
|
the Status is changed back to
|
|
active(1).
|
|
|
|
config(3) - The community Status must be
|
|
set to this value in order to
|
|
configure it. When creating a
|
|
new community entry, initial
|
|
Status will be set to this
|
|
value.
|
|
|
|
destroy(4) - Set to this value to remove
|
|
the
|
|
community from the agent."
|
|
::= { agentSnmpCommunityConfigEntry 25 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSnmpTrapReceiverConfigTable
|
|
--********************************************************************
|
|
|
|
agentSnmpTrapReceiverConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSnmpTrapReceiverConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap messages are sent across a network to an SNMP
|
|
Network Manager. These messages alert the manager to
|
|
events occurring within the switch or on the network.
|
|
Up to six simultaneous trap receivers are supported."
|
|
::= { agentSnmpConfigGroup 6 }
|
|
|
|
agentSnmpTrapReceiverConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentSnmpTrapReceiverConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's Snmp Trap Receiver Config entry"
|
|
INDEX { agentSnmpTrapReceiverName }
|
|
::= { agentSnmpTrapReceiverConfigTable 1 }
|
|
|
|
AgentSnmpTrapReceiverConfigEntry ::= SEQUENCE {
|
|
agentSnmpTrapReceiverName OCTET STRING,
|
|
agentSnmpTrapReceiverIPAddress IpAddress,
|
|
agentSnmpTrapReceiverEnabled INTEGER,
|
|
agentSnmpTrapReceiverStatus RowStatus
|
|
}
|
|
|
|
agentSnmpTrapReceiverName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Snmp Trap Receiver Name.
|
|
This is the name of the remote network manager.
|
|
the name can be up to 16 characters,
|
|
and is case-sensitive."
|
|
::= { agentSnmpTrapReceiverConfigEntry 1 }
|
|
|
|
agentSnmpTrapReceiverIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP network Manager IP Address. The IP Address
|
|
traps will be sent to. Each IP address parameter
|
|
is four integer numbers. The numbers range from
|
|
0 to 255. After creation of entry IP Address
|
|
cannot be changed."
|
|
::= { agentSnmpTrapReceiverConfigEntry 2 }
|
|
|
|
agentSnmpTrapReceiverEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER{no(0),yes(1)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag to enable the trap receiver. If
|
|
disabled, no traps are sent to this receiver's
|
|
IP Address. "
|
|
DEFVAL{ no }
|
|
::= { agentSnmpTrapReceiverConfigEntry 3 }
|
|
|
|
agentSnmpTrapReceiverStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete instances
|
|
of this table.
|
|
The row, when created with the row status value
|
|
of 'createAndGo' or 'createAndWait' is moved to the
|
|
'active' state automatically by the agent and remains
|
|
in that state till the time the row is removed through
|
|
the 'destroy' option."
|
|
::= { agentSnmpTrapReceiverConfigEntry 23 }
|
|
|
|
--********************************************************************
|
|
-- agentSnmpTrapFlagsConfigGroup
|
|
--********************************************************************
|
|
|
|
agentSnmpTrapFlagsConfigGroup OBJECT IDENTIFIER ::=
|
|
{ agentSnmpConfigGroup 7 }
|
|
|
|
agentSnmpAuthenticationTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication Flag - Enable/Disable
|
|
authentication Flag."
|
|
::= { agentSnmpTrapFlagsConfigGroup 1 }
|
|
|
|
agentSnmpLinkUpDownTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link Up/Down Flag - Enable/Disable Link Up/Link
|
|
Down traps for the entire switch. When set to
|
|
Enable, the Link Up/Down traps will be sent only
|
|
if the Link Trap flag setting associated with
|
|
the port (Port Configuration Menu) is set to
|
|
Enable."
|
|
::= { agentSnmpTrapFlagsConfigGroup 2 }
|
|
|
|
agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiple Users Flag - Enable/Disable Multiple
|
|
User traps. When the value is set to Enable, a
|
|
Multiple User Trap is sent whenever someone logs
|
|
in to the terminal interface (EIA 232 or Telnet)
|
|
and there is already an existing terminal
|
|
interface session"
|
|
::= { agentSnmpTrapFlagsConfigGroup 3 }
|
|
|
|
agentSnmpSpanningTreeTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spanning Tree Flag - This flag enables the
|
|
sending of new root traps and topology change
|
|
notification traps."
|
|
::= { agentSnmpTrapFlagsConfigGroup 4 }
|
|
|
|
agentSnmpBroadcastStormTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Broadcast Storm Flag - This flag enables or
|
|
disables the broadcast storm trap. You must also
|
|
enable Broadcast Storm Recovery Mode
|
|
(see the Switch Configuration Menu). When this
|
|
value is set to Enable and Broadcast Storm
|
|
Recovery mode is set to Enable, the Broadcast
|
|
Storm Start/End traps are sent when the switch
|
|
enters and leaves Broadcast Storm Recovery."
|
|
::= { agentSnmpTrapFlagsConfigGroup 5 }
|
|
|
|
--********************************************************************
|
|
-- agentSnmpV3ConfigGroup
|
|
--********************************************************************
|
|
|
|
agentSnmpV3ConfigGroup OBJECT IDENTIFIER ::= {agentConfigGroup 6}
|
|
|
|
|
|
agentSnmpVersion3Status OBJECT-TYPE
|
|
SYNTAX INTEGER{disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snmp Version 3 Status"
|
|
::= { agentSnmpV3ConfigGroup 1 }
|
|
|
|
--********************************************************************
|
|
-- agentSnmpV3UserConfigTable
|
|
--********************************************************************
|
|
|
|
agentSnmpV3UserConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSnmpV3UserConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Config Table. Only creation and deletion of
|
|
users is supported. All individual updates are
|
|
not supported."
|
|
::= { agentSnmpV3ConfigGroup 2 }
|
|
|
|
agentSnmpV3UserConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentSnmpV3UserConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Config Entry"
|
|
INDEX { agentSnmpV3UserName }
|
|
::= { agentSnmpV3UserConfigTable 1 }
|
|
|
|
AgentSnmpV3UserConfigEntry ::= SEQUENCE {
|
|
agentSnmpV3UserName OCTET STRING,
|
|
agentSnmpV3UserAccessMode INTEGER,
|
|
agentSnmpV3UserAuthenticationType INTEGER,
|
|
agentSnmpV3UserEncryptionType INTEGER,
|
|
agentSnmpV3UserAuthenticationPassword OCTET STRING,
|
|
agentSnmpV3UserEncryptionPassword OCTET STRING,
|
|
agentSnmpV3UserStatus RowStatus
|
|
}
|
|
|
|
agentSnmpV3UserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent User Name."
|
|
::= { agentSnmpV3UserConfigEntry 1 }
|
|
|
|
agentSnmpV3UserAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readonly(1),
|
|
readwrite(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent User Access Mode"
|
|
::= { agentSnmpV3UserConfigEntry 2 }
|
|
|
|
|
|
agentSnmpV3UserAuthenticationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
hmacmd5(2),
|
|
hmacsha(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 User Authentication
|
|
none(1) - no authentication used
|
|
hmacmd5(1) - Use HMAC-MD5 authentication
|
|
hmacsha(1) - Use HMAC-SHA authentication"
|
|
::= { agentSnmpV3UserConfigEntry 3 }
|
|
|
|
agentSnmpV3UserEncryptionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
des(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 User Encryption Must be set to none(1) if
|
|
agentSnmpV3UserAuthenticationType is set to
|
|
none(1). Setting this object will set the
|
|
encryption password to an empty string.
|
|
none(1) - no encryption used
|
|
des(1) - DES encryption used"
|
|
::= { agentSnmpV3UserConfigEntry 4 }
|
|
|
|
agentSnmpV3UserAuthenticationPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 User Encryption Password"
|
|
::= { agentSnmpV3UserConfigEntry 5 }
|
|
|
|
agentSnmpV3UserEncryptionPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 User Encryption Password"
|
|
::= { agentSnmpV3UserConfigEntry 6 }
|
|
|
|
agentSnmpV3UserStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Agent User Status.
|
|
active(1) - This user account is active.
|
|
destroy(6) - Set to this value to remove this
|
|
user account."
|
|
::= { agentSnmpV3UserConfigEntry 26 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSpanningTreePortTable
|
|
--********************************************************************
|
|
agentSpanningTreeConfigGroup OBJECT IDENTIFIER ::=
|
|
{ agentConfigGroup 7 }
|
|
|
|
|
|
agentSpanningTreeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Spanning Tree Switch Status"
|
|
::= { agentSpanningTreeConfigGroup 1 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSwitchConfigGroup
|
|
--********************************************************************
|
|
|
|
agentSwitchConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 8
|
|
}
|
|
|
|
agentSwitchAddressAgingTimeoutTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSwitchAddressAgingTimeoutEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's address aging timeout table"
|
|
::= { agentSwitchConfigGroup 4 }
|
|
|
|
agentSwitchAddressAgingTimeoutEntry OBJECT-TYPE
|
|
SYNTAX AgentSwitchAddressAgingTimeoutEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Aging information about a specific Filtering
|
|
Database."
|
|
INDEX { dot1qFdbId }
|
|
::= { agentSwitchAddressAgingTimeoutTable 1 }
|
|
|
|
AgentSwitchAddressAgingTimeoutEntry ::=
|
|
SEQUENCE {
|
|
agentSwitchAddressAgingTimeout
|
|
Integer32
|
|
}
|
|
|
|
agentSwitchAddressAgingTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (10..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FDB entry's address aging timeout(in
|
|
seconds)"
|
|
DEFVAL { 300 }
|
|
::= { agentSwitchAddressAgingTimeoutEntry 10 }
|
|
|
|
agentSwitchBroadcastControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch config broadcast allows you to enable
|
|
or disable broadcast storm recovery mode. When
|
|
you specify Enable for Broadcast Storm Recovery
|
|
and the broadcast traffic on any Ethernet port
|
|
exceeds 20 percent of the link speed, the switch
|
|
blocks (discards) the broadcast traffic until
|
|
the broadcast traffic returns to 10 percent or
|
|
less.Upper limit for 10M link is 20% and lower
|
|
limit is 10%. For 100M link Upper limit is 5%
|
|
and lower limit is 2%"
|
|
::= { agentSwitchConfigGroup 2 }
|
|
|
|
agentSwitchDot3FlowControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config switchconfig flowcontrol allows you to
|
|
enable or disable 802.3x flow control for the
|
|
switch. This value applies to only full-duplex
|
|
mode ports. "
|
|
::= { agentSwitchConfigGroup 3 }
|
|
|
|
agentSwitchLwappTransportMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
layer2(1),
|
|
layer3(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LWAPP transport mode decides if the switch
|
|
is operating in the Layer2 or Layer3 mode.
|
|
The switch needs to be rebooted for the mode
|
|
change to take effect."
|
|
::= { agentSwitchConfigGroup 5 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTransferConfigGroup
|
|
--********************************************************************
|
|
|
|
agentTransferConfigGroup OBJECT IDENTIFIER ::=
|
|
{ agentConfigGroup 9 }
|
|
|
|
|
|
--*******************************************************************
|
|
-- agentTransferUploadGroup
|
|
--*******************************************************************
|
|
|
|
agentTransferUploadGroup OBJECT IDENTIFIER ::=
|
|
{ agentTransferConfigGroup 1 }
|
|
|
|
agentTransferUploadMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
xmodem(2),
|
|
ymodem(3),
|
|
zmodem(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload mode configures the mode to use
|
|
when uploading from the switch. The mode is
|
|
either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
|
|
only when the file transfer is initiated by the
|
|
serial EIA 232 port."
|
|
::= { agentTransferUploadGroup 1 }
|
|
|
|
agentTransferUploadServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload tftpserverip configures the IP
|
|
address of the server where the file will be
|
|
uploaded. It is valid only when the Transfer
|
|
Mode is TFTP. The address is 4 integer bytes
|
|
ranging from 0 to 255."
|
|
::= { agentTransferUploadGroup 2 }
|
|
|
|
agentTransferUploadPath OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload tftppath configures the
|
|
directory
|
|
path where the file is to be uploaded to. The
|
|
switch remembers the last file path used."
|
|
::= { agentTransferUploadGroup 3 }
|
|
|
|
agentTransferUploadFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload tftpfilename configures the
|
|
file name for the file being uploaded from the
|
|
switch. It can be up to 32 alphanumeric
|
|
characters. The switch remembers the last file
|
|
name used. File path can be appended to the file
|
|
name if the string is less than 17 characters.
|
|
Otherwise, the File Path field will need to be
|
|
used and the File Name will be appended to the
|
|
File Path as is. An example would be File Path
|
|
set to c:\tftp\code\ and File Name set to
|
|
e1r1v1.opr.
|
|
Note: File Name, File Path, and TFTP Server IP
|
|
Address are applicable only if the Transfer Mode
|
|
is TFTP."
|
|
::= { agentTransferUploadGroup 4 }
|
|
|
|
agentTransferUploadDataType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(2),
|
|
errorlog(3),
|
|
systemtrace(4),
|
|
traplog(5),
|
|
crashfile(6),
|
|
signatures(7),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload datatype configures the type of
|
|
file to upload from the switch.
|
|
The types for upload are:
|
|
- Configuration File
|
|
- Error log
|
|
- System trace
|
|
- Trap log
|
|
- Crash File
|
|
"
|
|
::= { agentTransferUploadGroup 5 }
|
|
|
|
|
|
agentTransferUploadStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer upload start will start an upload
|
|
transfer. The agentTransferUploadMode object
|
|
must not be set to xmodem(2), ymodem(3), or
|
|
zmodem(4) to initiate a transfer via SNMP."
|
|
::= { agentTransferUploadGroup 6 }
|
|
|
|
agentTransferUploadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notInitiated(1),
|
|
transferStarting(2),
|
|
errorStarting(3),
|
|
wrongFileType(4),
|
|
updatingConfig(5),
|
|
invalidConfigFile(6),
|
|
writingToFlash(7),
|
|
failureWritingToFlash(8),
|
|
checkingCRC(9),
|
|
failedCRC(10),
|
|
unknownDirection(11),
|
|
transferSuccessful(12),
|
|
transferFailed(13),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current status of an upload
|
|
transfer."
|
|
::= { agentTransferUploadGroup 7 }
|
|
|
|
agentTransferConfigurationFileEncryption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration file can be encrypted before
|
|
tftp upload from the switch and then decrypted
|
|
before downloading to the switch when this
|
|
option is enabled."
|
|
::= { agentTransferConfigGroup 3 }
|
|
|
|
agentTransferConfigurationFileEncryptionKey OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the key to be used when encrypting the
|
|
configuration file while upload from the switch
|
|
or while decrypting the file after download to
|
|
the switch."
|
|
::= { agentTransferConfigGroup 4 }
|
|
|
|
|
|
|
|
--********************************************************************
|
|
-- agentTransferDownloadGroup
|
|
--********************************************************************
|
|
|
|
agentTransferDownloadGroup OBJECT IDENTIFIER ::=
|
|
{ agentTransferConfigGroup 2 }
|
|
|
|
agentTransferDownloadMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
xmodem(2),
|
|
ymodem(3),
|
|
zmodem(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download mode configures the mode to
|
|
use when downloading to the switch. The mode is
|
|
either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
|
|
only when the file transfer is initiated by the
|
|
serial EIA 232 port."
|
|
::= { agentTransferDownloadGroup 1 }
|
|
|
|
agentTransferDownloadServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download tftpserverip configures the IP
|
|
address of the server where the file is located.
|
|
It is valid only when the Transfer Mode is TFTP.
|
|
The address is 4 integer bytes ranging from 0 to
|
|
255."
|
|
::= { agentTransferDownloadGroup 2 }
|
|
|
|
agentTransferDownloadPath OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download tftppath configures the
|
|
directory path where the file is located. The
|
|
switch remembers the last file path used."
|
|
::= { agentTransferDownloadGroup 3 }
|
|
|
|
agentTransferDownloadFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download tftpfilename configures the
|
|
file name for the file being downloaded to the
|
|
switch. It can be up to 32 alphanumeric
|
|
characters. The switch remembers the last file
|
|
name used. File path can be appended to the
|
|
file name if the string is less than 33
|
|
characters. Otherwise, the File Path field will
|
|
need to be used and the File Name will be
|
|
appended to the File Path as is. An example
|
|
would be File Path set to c:\tftp\code\
|
|
and File Name set to e1r1v1.opr. Note: File
|
|
Name, File Path, and TFTP Server IP Address are
|
|
applicable only if the Transfer Mode is TFTP."
|
|
|
|
::= { agentTransferDownloadGroup 4 }
|
|
|
|
agentTransferDownloadDataType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
code(2),
|
|
config(3),
|
|
webauthcert(4),
|
|
webadmincert(5),
|
|
signatures(6),
|
|
customWebAuth(7),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download datatype configures the type
|
|
of file to downloaded to the switch.
|
|
The types for download are:
|
|
- Code
|
|
- Configuration
|
|
- Certificates
|
|
- Signatures
|
|
- customWebauth- custom webauth tar ball"
|
|
::= { agentTransferDownloadGroup 5 }
|
|
|
|
|
|
agentTransferDownloadStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer download start will start an download
|
|
transfer. The agentTransferDownloadMode object
|
|
must not be set to xmodem(2), ymodem(3), or
|
|
zmodem(4) to initiate a transfer via SNMP."
|
|
::= { agentTransferDownloadGroup 6 }
|
|
|
|
agentTransferDownloadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notInitiated(1),
|
|
transferStarting(2),
|
|
errorStarting(3),
|
|
wrongFileType(4),
|
|
updatingConfig(5),
|
|
invalidConfigFile(6),
|
|
writingToFlash(7),
|
|
failureWritingToFlash(8),
|
|
checkingCRC(9),
|
|
failedCRC(10),
|
|
unknownDirection(11),
|
|
transferSuccessful(12),
|
|
transferFailed(13),
|
|
bootBreakOff(14),
|
|
invalidTarFile(15),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current status of an download
|
|
transfer."
|
|
::= { agentTransferDownloadGroup 7 }
|
|
|
|
agentTransferDownloadTftpMaxRetries OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of retries to be allowed for a
|
|
TFTP message packet."
|
|
DEFVAL{ 10 }
|
|
::= { agentTransferDownloadGroup 8 }
|
|
|
|
agentTransferDownloadTftpTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timeout in seconds for a TFTP message packet."
|
|
DEFVAL{ 6 }
|
|
::= { agentTransferDownloadGroup 9 }
|
|
|
|
--********************************************************************
|
|
-- agentDot3adAggPortTable
|
|
--********************************************************************
|
|
|
|
agentDot3adAggPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDot3adAggPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This table provides 802.3ad link aggregation
|
|
information for each physical port that is not
|
|
available through the standard MIB."
|
|
::= { agentConfigGroup 11 }
|
|
|
|
agentDot3adAggPortEntry OBJECT-TYPE
|
|
SYNTAX AgentDot3adAggPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Information about a table entry. The
|
|
agentDot3adAggPort identifies the external
|
|
interface number of the port."
|
|
INDEX { agentDot3adAggPort }
|
|
::= { agentDot3adAggPortTable 1 }
|
|
|
|
AgentDot3adAggPortEntry ::= SEQUENCE {
|
|
agentDot3adAggPort Integer32,
|
|
agentDot3adAggPortLACPMode INTEGER
|
|
}
|
|
|
|
agentDot3adAggPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"ifIndex of this physical port"
|
|
::= { agentDot3adAggPortEntry 1 }
|
|
|
|
agentDot3adAggPortLACPMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Enable/disable 802.3ad LACP on this port"
|
|
::= { agentDot3adAggPortEntry 21 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentPortConfigTable
|
|
--
|
|
--********************************************************************
|
|
|
|
agentPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the switch's physical port config
|
|
entries"
|
|
::= { agentConfigGroup 12 }
|
|
|
|
agentPortConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch's physical port config entry"
|
|
INDEX { agentPortDot1dBasePort }
|
|
::= { agentPortConfigTable 1 }
|
|
|
|
AgentPortConfigEntry ::= SEQUENCE {
|
|
agentPortDot1dBasePort Integer32,
|
|
agentPortIfIndex Integer32,
|
|
agentPortIanaType IANAifType,
|
|
agentPortSTPMode INTEGER,
|
|
agentPortSTPState INTEGER,
|
|
agentPortAdminMode INTEGER,
|
|
agentPortPhysicalMode INTEGER,
|
|
agentPortPhysicalStatus INTEGER,
|
|
agentPortLinkTrapMode INTEGER,
|
|
agentPortClearStats INTEGER,
|
|
agentPortDefaultType OBJECT IDENTIFIER,
|
|
agentPortType OBJECT IDENTIFIER,
|
|
agentPortAutoNegAdminStatus INTEGER,
|
|
agentPortDot3FlowControlMode INTEGER,
|
|
agentPortPowerMode INTEGER,
|
|
agentPortGvrpStatus INTEGER,
|
|
agentPortGarpJoinTime Unsigned32,
|
|
agentPortGarpLeaveTime Unsigned32,
|
|
agentPortGarpLeaveAllTime Unsigned32,
|
|
agentPortMirrorMode INTEGER,
|
|
agentPortMulticastApplianceMode INTEGER,
|
|
agentPortOperationalStatus INTEGER
|
|
}
|
|
|
|
agentPortDot1dBasePort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of this port."
|
|
::= { agentPortConfigEntry 1 }
|
|
|
|
agentPortIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port IfIndex"
|
|
::= { agentPortConfigEntry 2 }
|
|
|
|
agentPortIanaType OBJECT-TYPE
|
|
SYNTAX IANAifType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Type"
|
|
::= { agentPortConfigEntry 3 }
|
|
|
|
agentPortSTPMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1d(1),
|
|
fast(2),
|
|
off(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Spanning Tree Protocol Mode
|
|
STP mode values are:
|
|
dot1d (the default)
|
|
fast, indicates you want to use the fast
|
|
spanning tree mode
|
|
off, indicates the STP mode is turned off for a
|
|
particular port"
|
|
::= { agentPortConfigEntry 4 }
|
|
|
|
agentPortSTPState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocking(1),
|
|
listening(2),
|
|
learning(3),
|
|
forwarding(4),
|
|
disabled(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Spanning Tree Protocol State"
|
|
::= { agentPortConfigEntry 5 }
|
|
|
|
agentPortAdminMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Admin Mode"
|
|
::= { agentPortConfigEntry 6 }
|
|
|
|
agentPortPhysicalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoNegotiate(1),
|
|
half10(2),
|
|
full10(3),
|
|
half100(4),
|
|
full100(5),
|
|
full1000sx(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Speed Mode. This is the
|
|
configured physical mode.This object is
|
|
read-only for gigabit ports"
|
|
::= { agentPortConfigEntry 7 }
|
|
|
|
agentPortPhysicalStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autonegotiate(1),
|
|
half10(2),
|
|
full10(3),
|
|
half100(4),
|
|
full100(5),
|
|
full1000sx(8),
|
|
unknown(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Physical Speed Status.This
|
|
is the current actual speed."
|
|
::= { agentPortConfigEntry 8 }
|
|
|
|
agentPortLinkTrapMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, link up and link down traps will be
|
|
sent for this port."
|
|
::= { agentPortConfigEntry 9 }
|
|
|
|
agentPortClearStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear stats for this port only"
|
|
::= { agentPortConfigEntry 10 }
|
|
|
|
agentPortDefaultType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the default administrative
|
|
port type, to be used in conjunction with the
|
|
operational port type denoted by agentPortType.
|
|
|
|
The set of possible values for this object is
|
|
the same as the set defined for the agentPortType
|
|
object.
|
|
|
|
This object represents the administratively-
|
|
configured
|
|
type of the MAU. If auto-negotiation is not enabled
|
|
or is not implemented for this MAU, the value of
|
|
this object determines the operational type of the
|
|
MAU. In this case, a set to this object will force
|
|
the MAU into the specified operating mode.
|
|
|
|
If auto-negotiation is implemented and enabled for
|
|
this MAU, the operational type of the MAU is
|
|
determined by auto-negotiation, and the value of
|
|
this object denotes the type to which the MAU will
|
|
automatically revert if/when auto-negotiation is
|
|
later disabled.
|
|
|
|
The valid values for this object are:
|
|
dot3MauType10BaseTHD
|
|
dot3MauType10BaseTFD
|
|
dot3MauType100BaseTXHD
|
|
dot3MauType100BaseTXFD
|
|
dot3MauType100BaseFXFD
|
|
dot3MauType1000BaseSXFD"
|
|
|
|
REFERENCE "RFC 2668"
|
|
::= { agentPortConfigEntry 11 }
|
|
|
|
agentPortType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the port type.
|
|
An initial set of MAU types are defined in RFC 2668.
|
|
The assignment of OBJECT IDENTIFIERs to new types of
|
|
MAUs is managed by the IANA.
|
|
|
|
If the MAU type is unknown, the object identifier
|
|
unknownMauType OBJECT IDENTIFIER ::= { 0 0 }
|
|
is returned. Note that unknownMauType is a
|
|
syntactically valid object identifier, and any
|
|
conformant implementation of ASN.1 and the BER must
|
|
be able to generate and recognize this value.
|
|
This object represents the operational type of the
|
|
MAU, as determined by either (1) the result of the
|
|
auto-negotiation function or (2) if auto-negotiation
|
|
is not enabled or is not implemented for this MAU,
|
|
by the value of the object qbEnetDefaultType, or (3)
|
|
for the GigE card a value determined by the GBIC
|
|
connected to the card. In case (2), a set to the
|
|
object qbEnetPortDefaultType will force the MAU into
|
|
the new operating mode.
|
|
|
|
The valid values for this object are:
|
|
|
|
dot3MauType10BaseTHD
|
|
dot3MauType10BaseTFD
|
|
dot3MauType100BaseTXHD
|
|
dot3MauType100BaseTXFD
|
|
dot3MauType100BaseFXFD
|
|
dot3MauType1000BaseSXFD"
|
|
|
|
REFERENCE "RFC 2668"
|
|
::= { agentPortConfigEntry 12 }
|
|
|
|
agentPortAutoNegAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the administration status of
|
|
auto negotiation for this port."
|
|
::= { agentPortConfigEntry 13 }
|
|
|
|
|
|
agentPortDot3FlowControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config flowcontrol allows you to enable or
|
|
disable 802.3x flow control for this port. This
|
|
value applies to only full-duplex mode ports."
|
|
::= { agentPortConfigEntry 14 }
|
|
|
|
agentPortPowerMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable/Disable the port's Power over ethernet. This doesn't
|
|
apply to appliances that have no POE controller."
|
|
::= { agentPortConfigEntry 15 }
|
|
|
|
agentPortGvrpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The state of GVRP operation on this port. The value
|
|
enabled(1) indicates that GVRP is enabled on this port,
|
|
as long as dot1qGvrpStatus is also enabled for this
|
|
device. When disabled(2) but dot1qGvrpStatus is still
|
|
enabled for the device, GVRP is disabled on this port:
|
|
any GVRP packets received will be silently discarded and
|
|
no GVRP registrations will be propagated from other
|
|
ports. This object affects all GVRP Applicant and
|
|
Registrar state machines on this port. A transition
|
|
from disabled(2) to enabled(1) will cause a reset of all
|
|
GVRP state machines on this port.(Attribute no longer
|
|
supported)"
|
|
DEFVAL { enabled }
|
|
::= { agentPortConfigEntry 16 }
|
|
|
|
agentPortGarpJoinTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The GARP Join time, in centiseconds.(Attribute no longer
|
|
supported)"
|
|
DEFVAL { 20 }
|
|
::= { agentPortConfigEntry 17 }
|
|
|
|
agentPortGarpLeaveTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The GARP Leave time, in centiseconds.(Attribute no
|
|
longer supported)"
|
|
DEFVAL { 60 }
|
|
::= { agentPortConfigEntry 18 }
|
|
|
|
agentPortGarpLeaveAllTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The GARP LeaveAll time, in centiseconds.(Attribute no
|
|
longer supported)"
|
|
DEFVAL { 1000 }
|
|
::= { agentPortConfigEntry 19 }
|
|
|
|
agentPortMirrorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch's Port Mirror Mode. If enabled, then
|
|
this is the port that the packets are mirrored
|
|
to."
|
|
::= { agentPortConfigEntry 20 }
|
|
|
|
agentPortMulticastApplianceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Multicast Appliance Mode. If enabled,
|
|
then this port allows multicast streams through
|
|
it. At a time, a maximum of four ports including
|
|
the gigabit ethernet port can have this mode
|
|
enabled on them. This is to limit the number of
|
|
multicast streams allowed through the switch
|
|
at a given time."
|
|
::= { agentPortConfigEntry 21 }
|
|
|
|
agentPortOperationalStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the port."
|
|
::= { agentPortConfigEntry 40 }
|
|
|
|
|
|
--********************************************************************
|
|
-- agentSystemGroup
|
|
--********************************************************************
|
|
|
|
agentSaveConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"save config to NVRAM"
|
|
::= { agentSystemGroup 1 }
|
|
|
|
agentClearConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear config to factory defaults"
|
|
::= { agentSystemGroup 2 }
|
|
|
|
agentClearLags OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear lag configuration"
|
|
::= { agentSystemGroup 3 }
|
|
|
|
agentClearLoginSessions OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"close all telnet sessions"
|
|
::= { agentSystemGroup 4 }
|
|
|
|
agentClearPortStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear all port statistics"
|
|
::= { agentSystemGroup 6 }
|
|
|
|
agentClearSwitchStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear all switch statistics"
|
|
::= { agentSystemGroup 7 }
|
|
|
|
agentClearTrapLog OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear trap log"
|
|
::= { agentSystemGroup 8 }
|
|
|
|
|
|
agentResetSystem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"reset the switch"
|
|
::= { agentSystemGroup 10 }
|
|
|
|
|
|
--********************************************************************
|
|
-- portStatsTable
|
|
-- Enterprise portion of Ethernet Statistics Group
|
|
-- This augments the etherStatsTable of RMON group.
|
|
--********************************************************************
|
|
|
|
portStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of additional thernet statistics entries."
|
|
::= { stats 1 }
|
|
|
|
portStatsEntry OBJECT-TYPE
|
|
SYNTAX PortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of statistics kept for a particular Ethernet
|
|
interface."
|
|
INDEX { portStatsIndex }
|
|
::= { portStatsTable 1 }
|
|
|
|
PortStatsEntry ::= SEQUENCE {
|
|
portStatsIndex Integer32,
|
|
portStatsPktsTx64Octets Counter32,
|
|
portStatsPktsTx65to127Octets Counter32,
|
|
portStatsPktsTx128to255Octets Counter32,
|
|
portStatsPktsTx256to511Octets Counter32,
|
|
portStatsPktsTx512to1023Octets Counter32,
|
|
portStatsPktsTx1024to1518Octets Counter32,
|
|
portStatsPktsRx1519to1530Octets Counter32,
|
|
portStatsPktsTx1519to1530Octets Counter32,
|
|
portStatsPktsTxOversizeOctets Counter32
|
|
}
|
|
|
|
portStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object uniquely identifies
|
|
this portStatsEntry."
|
|
::= { portStatsEntry 1 }
|
|
|
|
portStatsPktsTx64Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were 64 octets in length
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 2 }
|
|
|
|
portStatsPktsTx65to127Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
65 and 127 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 3 }
|
|
|
|
portStatsPktsTx128to255Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
128 and 255 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 4 }
|
|
|
|
portStatsPktsTx256to511Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
256 and 511 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 5 }
|
|
|
|
portStatsPktsTx512to1023Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
512 and 1023 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 6 }
|
|
|
|
portStatsPktsTx1024to1518Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
1024 and 1518 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 7 }
|
|
|
|
portStatsPktsRx1519to1530Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) received that were between
|
|
1519 and 1530 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 8 }
|
|
|
|
portStatsPktsTx1519to1530Octets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were between
|
|
1519 and 1530 octets in length inclusive
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 9 }
|
|
|
|
|
|
portStatsPktsTxOversizeOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets (including bad
|
|
packets) transmitted that were more than
|
|
1530 octets in length.
|
|
(excluding framing bits but including FCS octets)."
|
|
::= { portStatsEntry 30 }
|
|
|
|
|
|
--********************************************************************
|
|
-- switchingTraps
|
|
--********************************************************************
|
|
|
|
multipleUsersTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiple Users Log Trap."
|
|
::= { switchingTraps 1 }
|
|
|
|
broadcastStormStartTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast Storm Start Log Trap."
|
|
::= { switchingTraps 2 }
|
|
|
|
broadcastStormEndTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast Storm End Log Trap."
|
|
::= { switchingTraps 3 }
|
|
|
|
linkFailureTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"trapMgrLinkFailureLogTrap."
|
|
::= { switchingTraps 4 }
|
|
|
|
vlanRequestFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan Request Failure Log Trap"
|
|
::= { switchingTraps 5 }
|
|
|
|
vlanDeleteLastTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last Vlan Delete Log Trap"
|
|
::= { switchingTraps 6 }
|
|
|
|
vlanDefaultCfgFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default Vlan Config Failure Log Trap"
|
|
::= { switchingTraps 7 }
|
|
|
|
vlanRestoreFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan Restore Failure Log Trap"
|
|
::= { switchingTraps 8 }
|
|
|
|
fanFailureTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan Failure Log Trap."
|
|
::= { switchingTraps 9 }
|
|
|
|
stpInstanceNewRootTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STP Instance New Root Trap"
|
|
::= { switchingTraps 10 }
|
|
|
|
stpInstanceTopologyChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1qVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STP Instance Topology Change Trap"
|
|
::= { switchingTraps 11 }
|
|
|
|
powerSupplyStatusChangeTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power Supply Status Change Trap"
|
|
::= { switchingTraps 12 }
|
|
|
|
|
|
--********************************************************************
|
|
--* Compliance statements
|
|
--********************************************************************
|
|
bsnSwitchingCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the bsnSwitching module"
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS { bsnSwitchingAgentInfoGroup,
|
|
bsnSwitchingAgentConfigGroup,
|
|
bsnSwitchingAgentSystemGroup,
|
|
bsnSwitchingAgentStatsGroup }
|
|
::= { bsnSwitchingCompliances 1 }
|
|
|
|
--********************************************************************
|
|
--* Units of conformance
|
|
--********************************************************************
|
|
bsnSwitchingAgentInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
agentInventorySysDescription,
|
|
agentInventoryMachineType,
|
|
agentInventoryMachineModel,
|
|
agentInventorySerialNumber,
|
|
agentInventoryMaintenanceLevel,
|
|
agentInventoryBurnedInMacAddress,
|
|
agentInventoryOperatingSystem,
|
|
agentInventoryManufacturerName,
|
|
agentInventoryProductName,
|
|
agentInventoryProductVersion,
|
|
agentInventoryIsGigECardPresent,
|
|
agentInventoryIsCryptoCardPresent,
|
|
agentInventoryIsForeignAPSupported,
|
|
agentInventoryMaxNumberOfAPsSupported,
|
|
agentInventoryIsCryptoCard2Present,
|
|
agentInventoryFipsModeEnabled,
|
|
agentTrapLogTotal,
|
|
agentTrapLogTotalSinceLastViewed,
|
|
agentTrapLogIndex,
|
|
agentTrapLogSystemTime,
|
|
agentTrapLogTrap,
|
|
agentRadioUpDownTrapCount,
|
|
agentApAssociateDisassociateTrapCount,
|
|
agentApLoadProfileFailTrapCount,
|
|
agentApNoiseProfileFailTrapCount,
|
|
agentApInterferenceProfileFailTrapCount,
|
|
agentApCoverageProfileFailTrapCount,
|
|
agentSwitchInfoLwappTransportMode,
|
|
agentSwitchInfoPowerSupply1Present,
|
|
agentSwitchInfoPowerSupply1Operational,
|
|
agentSwitchInfoPowerSupply2Present,
|
|
agentSwitchInfoPowerSupply2Operational,
|
|
agentCurrentCPUUtilization,
|
|
agentTotalMemory,
|
|
agentFreeMemory,
|
|
agentWcpDeviceName,
|
|
agentWcpSlotNumber,
|
|
agentWcpPortNumber,
|
|
agentWcpPeerPortNumber,
|
|
agentWcpPeerIpAddress,
|
|
agentWcpControllerTableChecksum,
|
|
agentWcpControllerInfoSlotNumber,
|
|
agentWcpControllerInfoPortNumber,
|
|
agentWcpControllerInfoIpAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide switching information."
|
|
::= { bsnSwitchingGroups 1}
|
|
|
|
|
|
bsnSwitchingAgentConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
agentLoginSessionIndex,
|
|
agentLoginSessionUserName,
|
|
agentLoginSessionIPAddress,
|
|
agentLoginSessionConnectionType,
|
|
agentLoginSessionIdleTime,
|
|
agentLoginSessionSessionTime,
|
|
agentLoginSessionStatus,
|
|
agentTelnetLoginTimeout,
|
|
agentTelnetMaxSessions,
|
|
agentTelnetAllowNewMode,
|
|
agentSSHAllowNewMode,
|
|
agentSerialTimeout,
|
|
agentSerialBaudrate,
|
|
agentSerialCharacterSize,
|
|
agentSerialHWFlowControlMode,
|
|
agentSerialStopBits,
|
|
agentSerialParityType,
|
|
agentNetworkIPAddress,
|
|
agentNetworkSubnetMask,
|
|
agentNetworkDefaultGateway,
|
|
agentNetworkBurnedInMacAddress,
|
|
agentNetworkConfigProtocol,
|
|
agentNetworkWebMode,
|
|
agentNetworkSecureWebMode,
|
|
agentNetworkMulticastMode,
|
|
agentNetworkDsPortNumber,
|
|
agentNetworkUserIdleTimeout,
|
|
agentNetworkArpTimeout,
|
|
agentNetworkManagementVlan,
|
|
agentNetworkAllowMgmtViaWireless,
|
|
agentNetworkBroadcastSsidMode,
|
|
agentNetworkSecureWebPassword,
|
|
agentNetworkWebAdminCertType,
|
|
agentNetworkWebAuthCertRegenerateCmdInvoke,
|
|
agentNetworkWebAdminCertRegenerateCmdInvoke,
|
|
agentNetworkWebAuthCertType,
|
|
agentNetworkRouteIPAddress,
|
|
agentNetworkRouteIPNetmask,
|
|
agentNetworkRouteGateway,
|
|
agentNetworkRouteStatus,
|
|
agentNetworkPeerToPeerBlockingMode,
|
|
agentNetworkMulticastGroupAddress,
|
|
agentInterfaceName,
|
|
agentInterfaceVlanId,
|
|
agentInterfaceType,
|
|
agentInterfaceMacAddress,
|
|
agentInterfaceIPAddress,
|
|
agentInterfaceIPNetmask,
|
|
agentInterfaceIPGateway,
|
|
agentInterfacePortNo,
|
|
agentInterfacePrimaryDhcpAddress,
|
|
agentInterfaceSecondaryDhcpAddress,
|
|
agentInterfaceDhcpProtocol,
|
|
agentInterfaceDnsHostName,
|
|
agentInterfaceAclName,
|
|
agentInterfaceAPManagementFeature,
|
|
agentInterfaceActivePortNo,
|
|
agentInterfaceBackupPortNo,
|
|
agentInterfaceVlanQuarantine,
|
|
agentInterfaceRowStatus,
|
|
agentNtpPollingInterval,
|
|
agentNtpServerIndex,
|
|
agentNtpServerAddress,
|
|
agentNtpServerRowStatus,
|
|
agentDhcpScopeIndex,
|
|
agentDhcpScopeName,
|
|
agentDhcpScopeLeaseTime,
|
|
agentDhcpScopeNetwork,
|
|
agentDhcpScopeNetmask,
|
|
agentDhcpScopePoolStartAddress,
|
|
agentDhcpScopePoolEndAddress,
|
|
agentDhcpScopeDefaultRouterAddress1,
|
|
agentDhcpScopeDefaultRouterAddress2,
|
|
agentDhcpScopeDefaultRouterAddress3,
|
|
agentDhcpScopeDnsDomainName,
|
|
agentDhcpScopeDnsServerAddress1,
|
|
agentDhcpScopeDnsServerAddress2,
|
|
agentDhcpScopeDnsServerAddress3,
|
|
agentDhcpScopeNetbiosNameServerAddress1,
|
|
agentDhcpScopeNetbiosNameServerAddress2,
|
|
agentDhcpScopeNetbiosNameServerAddress3,
|
|
agentDhcpScopeState,
|
|
agentDhcpScopeRowStatus,
|
|
agentSnmpTrapPortNumber,
|
|
agentSnmpVersion1Status,
|
|
agentSnmpVersion2cStatus,
|
|
agentSnmpCommunityName,
|
|
agentSnmpCommunityIPAddress,
|
|
agentSnmpCommunityIPMask,
|
|
agentSnmpCommunityAccessMode,
|
|
agentSnmpCommunityEnabled,
|
|
agentSnmpCommunityStatus,
|
|
agentSnmpTrapReceiverName,
|
|
agentSnmpTrapReceiverIPAddress,
|
|
agentSnmpTrapReceiverEnabled,
|
|
agentSnmpTrapReceiverStatus,
|
|
agentSnmpAuthenticationTrapFlag,
|
|
agentSnmpLinkUpDownTrapFlag,
|
|
agentSnmpMultipleUsersTrapFlag,
|
|
agentSnmpSpanningTreeTrapFlag,
|
|
agentSnmpVersion3Status,
|
|
agentSnmpV3UserName,
|
|
agentSnmpV3UserAccessMode,
|
|
agentSnmpV3UserAuthenticationType,
|
|
agentSnmpV3UserEncryptionType,
|
|
agentSnmpV3UserAuthenticationPassword,
|
|
agentSnmpV3UserEncryptionPassword,
|
|
agentSnmpV3UserStatus,
|
|
agentSpanningTreeMode,
|
|
agentSwitchAddressAgingTimeout,
|
|
agentSwitchBroadcastControlMode,
|
|
agentSwitchDot3FlowControlMode,
|
|
agentSwitchLwappTransportMode,
|
|
agentTransferUploadMode,
|
|
agentTransferUploadServerIP,
|
|
agentTransferUploadPath,
|
|
agentTransferUploadFilename,
|
|
agentTransferUploadDataType,
|
|
agentTransferUploadStart,
|
|
agentTransferUploadStatus,
|
|
agentTransferConfigurationFileEncryption,
|
|
agentTransferConfigurationFileEncryptionKey,
|
|
agentTransferDownloadMode,
|
|
agentTransferDownloadServerIP,
|
|
agentTransferDownloadPath,
|
|
agentTransferDownloadFilename,
|
|
agentTransferDownloadDataType,
|
|
agentTransferDownloadStart,
|
|
agentTransferDownloadStatus,
|
|
agentTransferDownloadTftpMaxRetries,
|
|
agentTransferDownloadTftpTimeout,
|
|
agentPortDot1dBasePort,
|
|
agentPortIfIndex,
|
|
agentPortIanaType,
|
|
agentPortSTPMode,
|
|
agentPortSTPState,
|
|
agentPortAdminMode,
|
|
agentPortPhysicalMode,
|
|
agentPortPhysicalStatus,
|
|
agentPortLinkTrapMode,
|
|
agentPortClearStats,
|
|
agentPortDefaultType,
|
|
agentPortType,
|
|
agentPortAutoNegAdminStatus,
|
|
agentPortDot3FlowControlMode,
|
|
agentPortPowerMode,
|
|
agentPortMirrorMode,
|
|
agentPortMulticastApplianceMode,
|
|
agentPortOperationalStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide switching configuration
|
|
information."
|
|
::= { bsnSwitchingGroups 2}
|
|
|
|
bsnSwitchingAgentSystemGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
agentSaveConfig,
|
|
agentClearConfig,
|
|
agentClearLags,
|
|
agentClearLoginSessions,
|
|
agentClearPortStats,
|
|
agentClearSwitchStats,
|
|
agentClearTrapLog,
|
|
agentResetSystem
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide switching system
|
|
information and config."
|
|
::= { bsnSwitchingGroups 3 }
|
|
|
|
|
|
bsnSwitchingAgentStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
portStatsIndex,
|
|
portStatsPktsTx64Octets,
|
|
portStatsPktsTx65to127Octets,
|
|
portStatsPktsTx128to255Octets,
|
|
portStatsPktsTx256to511Octets,
|
|
portStatsPktsTx512to1023Octets,
|
|
portStatsPktsTx1024to1518Octets,
|
|
portStatsPktsRx1519to1530Octets,
|
|
portStatsPktsTx1519to1530Octets,
|
|
portStatsPktsTxOversizeOctets
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provide switching statistics."
|
|
::= { bsnSwitchingGroups 4 }
|
|
|
|
bsnSwitchingObsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
agentLagConfigCreate,
|
|
agentLagSummaryName,
|
|
agentLagSummaryLagIndex,
|
|
agentLagSummaryLinkTrap,
|
|
agentLagSummaryAdminMode,
|
|
agentLagSummaryStpMode,
|
|
agentLagSummaryAddPort,
|
|
agentLagSummaryDeletePort,
|
|
agentLagSummaryPortsBitMask,
|
|
agentLagSummaryStatus,
|
|
agentLagDetailedLagIndex,
|
|
agentLagDetailedIfIndex,
|
|
agentLagDetailedPortSpeed,
|
|
agentLagConfigMode,
|
|
agentServicePortIPAddress,
|
|
agentServicePortSubnetMask,
|
|
agentServicePortBurnedInMacAddress,
|
|
agentServicePortConfigProtocol,
|
|
agentSnmpBroadcastStormTrapFlag,
|
|
agentDot3adAggPort,
|
|
agentDot3adAggPortLACPMode,
|
|
agentNetworkGvrpStatus,
|
|
agentPortGvrpStatus,
|
|
agentPortGarpJoinTime,
|
|
agentPortGarpLeaveTime,
|
|
agentPortGarpLeaveAllTime,
|
|
agentLagSummaryFlushTimer,
|
|
agentServicePortDefaultGateway
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This collection of objects are obsoleted in bsnSwitching
|
|
module."
|
|
::= { bsnSwitchingGroups 5 }
|
|
|
|
bsnSwitchingTrap NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
multipleUsersTrap,
|
|
broadcastStormStartTrap,
|
|
broadcastStormEndTrap,
|
|
linkFailureTrap,
|
|
vlanRequestFailureTrap,
|
|
vlanDeleteLastTrap,
|
|
vlanDefaultCfgFailureTrap,
|
|
vlanRestoreFailureTrap,
|
|
fanFailureTrap,
|
|
stpInstanceNewRootTrap,
|
|
stpInstanceTopologyChangeTrap,
|
|
powerSupplyStatusChangeTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects provides switching related
|
|
notification."
|
|
::= { bsnSwitchingGroups 6 }
|
|
|
|
--********************************************************************
|
|
--* End of units of conformance
|
|
--********************************************************************
|
|
|
|
|
|
END
|
|
|