Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
309 lines
9.4 KiB
Text
309 lines
9.4 KiB
Text
-- *****************************************************************
|
|
-- BDCOM-MEMORY-POOL-MIB
|
|
--
|
|
-- October 2003
|
|
--
|
|
-- Copyright (c) 2003 by BDCOM, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
BDCOM-MEMORY-POOL-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32,
|
|
Gauge32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION,
|
|
DisplayString,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
bdMgmt
|
|
FROM BDCOM-SMI
|
|
Percent
|
|
FROM BDCOM-QOS-PIB-MIB;
|
|
|
|
bdcomMemoryPoolMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200310160000Z"
|
|
ORGANIZATION "BDCOM, Inc."
|
|
CONTACT-INFO
|
|
" Tel: +86-21-50800666
|
|
Postal: No.123,Juli RD,Zhangjiang Hitech Park,
|
|
Shanghai Baud Data Communication Corporation Inc,
|
|
Shanghai City 201203,
|
|
P.R.C "
|
|
DESCRIPTION
|
|
"MIB module for monitoring memory pools"
|
|
REVISION "200310160000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { bdMgmt 48 }
|
|
|
|
BDCOMMemoryPoolTypes ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the different types of memory pools that
|
|
may be present in a managed device. Memory pools can
|
|
be roughly categorized into two groups, predefined
|
|
pools and dynamic pools. The following pool types
|
|
are currently predefined:
|
|
1: processor memory
|
|
2: i/o memory
|
|
3: pci memory
|
|
4: fast memory
|
|
5: multibus memory
|
|
|
|
Dynamic pools will have a pool type value greater than
|
|
any of the predefined types listed above.
|
|
|
|
Note that only the processor pool is required to be
|
|
supported by all devices. Support for other pool types
|
|
is dependent on the device being managed."
|
|
SYNTAX Integer32 (1..65535)
|
|
|
|
bdcomMemoryPoolObjects
|
|
OBJECT IDENTIFIER ::= { bdcomMemoryPoolMIB 1 }
|
|
|
|
bdcomMemoryPoolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BDCOMMemoryPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of memory pool monitoring entries."
|
|
::= { bdcomMemoryPoolObjects 1 }
|
|
|
|
bdcomMemoryPoolEntry OBJECT-TYPE
|
|
SYNTAX BDCOMMemoryPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the memory pool monitoring table."
|
|
INDEX { bdcomMemoryPoolType }
|
|
::= { bdcomMemoryPoolTable 1 }
|
|
|
|
BDCOMMemoryPoolEntry ::=
|
|
SEQUENCE {
|
|
bdcomMemoryPoolType BDCOMMemoryPoolTypes,
|
|
bdcomMemoryPoolName DisplayString,
|
|
bdcomMemoryPoolAlternate Integer32,
|
|
bdcomMemoryPoolValid TruthValue,
|
|
bdcomMemoryPoolUsed Gauge32,
|
|
bdcomMemoryPoolFree Gauge32,
|
|
bdcomMemoryPoolLargestFree Gauge32
|
|
}
|
|
|
|
bdcomMemoryPoolType OBJECT-TYPE
|
|
SYNTAX BDCOMMemoryPoolTypes
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of memory pool for which this entry
|
|
contains information."
|
|
::= { bdcomMemoryPoolEntry 1 }
|
|
|
|
bdcomMemoryPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual name assigned to the memory pool. This
|
|
object is suitable for output to a human operator,
|
|
and may also be used to distinguish among the various
|
|
pool types, especially among dynamic pools."
|
|
::= { bdcomMemoryPoolEntry 2 }
|
|
|
|
bdcomMemoryPoolAlternate OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not this memory pool has an
|
|
alternate pool configured. Alternate pools are
|
|
used for fallback when the current pool runs out
|
|
of memory.
|
|
|
|
If an instance of this object has a value of zero,
|
|
then this pool does not have an alternate. Otherwise
|
|
the value of this object is the same as the value of
|
|
bdcomMemoryPoolType of the alternate pool."
|
|
::= { bdcomMemoryPoolEntry 3 }
|
|
|
|
bdcomMemoryPoolValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not the remaining objects in
|
|
this entry contain accurate data. If an instance
|
|
of this object has the value false (which in and of
|
|
itself indicates an internal error condition), the
|
|
values of the remaining objects in the conceptual row
|
|
may contain inaccurate information (specifically, the
|
|
reported values may be less than the actual values)."
|
|
::= { bdcomMemoryPoolEntry 4 }
|
|
|
|
bdcomMemoryPoolUsed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of bytes from the memory pool
|
|
that are currently in use by applications on the
|
|
managed device."
|
|
::= { bdcomMemoryPoolEntry 5 }
|
|
|
|
bdcomMemoryPoolFree OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of bytes from the memory pool
|
|
that are currently unused on the managed device.
|
|
|
|
Note that the sum of bdcomMemoryPoolUsed and
|
|
bdcomMemoryPoolFree is the total amount of memory
|
|
in the pool"
|
|
::= { bdcomMemoryPoolEntry 6 }
|
|
|
|
bdcomMemoryPoolLargestFree OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the largest number of contiguous bytes
|
|
from the memory pool that are currently unused on
|
|
the managed device."
|
|
::= { bdcomMemoryPoolEntry 7 }
|
|
|
|
bdcomMemoryPoolUtilizationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BDCOMMemoryPoolUtilizationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of memory pool utilization entries. Each of the
|
|
objects provides a general idea of how much of the memory
|
|
pool has been used over a given period of time. It is
|
|
determined as a weighted decaying average."
|
|
::= { bdcomMemoryPoolObjects 2 }
|
|
|
|
bdcomMemoryPoolUtilizationEntry OBJECT-TYPE
|
|
SYNTAX BDCOMMemoryPoolUtilizationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the memory pool utilization table."
|
|
AUGMENTS { bdcomMemoryPoolEntry }
|
|
::= { bdcomMemoryPoolUtilizationTable 1 }
|
|
|
|
BDCOMMemoryPoolUtilizationEntry ::=
|
|
SEQUENCE {
|
|
bdcomMemoryPoolUtilization1Min Percent,
|
|
bdcomMemoryPoolUtilization5Min Percent,
|
|
bdcomMemoryPoolUtilization10Min Percent
|
|
}
|
|
|
|
bdcomMemoryPoolUtilization1Min OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the memory pool utilization for 1 minute."
|
|
::= { bdcomMemoryPoolUtilizationEntry 1 }
|
|
|
|
bdcomMemoryPoolUtilization5Min OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the memory pool utilization for 5 minutes."
|
|
::= { bdcomMemoryPoolUtilizationEntry 2 }
|
|
|
|
bdcomMemoryPoolUtilization10Min OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the memory pool utilization for 10 minutes."
|
|
::= { bdcomMemoryPoolUtilizationEntry 3 }
|
|
|
|
-- notifications
|
|
|
|
bdcomMemoryPoolNotifications
|
|
OBJECT IDENTIFIER ::= { bdcomMemoryPoolMIB 2 }
|
|
|
|
-- (no notifications are currently defined)
|
|
|
|
|
|
-- conformance information
|
|
|
|
bdcomMemoryPoolConformance
|
|
OBJECT IDENTIFIER ::= { bdcomMemoryPoolMIB 3 }
|
|
bdcomMemoryPoolCompliances
|
|
OBJECT IDENTIFIER ::= { bdcomMemoryPoolConformance 1 }
|
|
bdcomMemoryPoolGroups
|
|
OBJECT IDENTIFIER ::= { bdcomMemoryPoolConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
bdcomMemoryPoolCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated -- superceded by bdcomMemoryPoolComplianceRev1
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the BDCOM Memory Pool MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { bdcomMemoryPoolGroup }
|
|
::= { bdcomMemoryPoolCompliances 1 }
|
|
|
|
bdcomMemoryPoolComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the BDCOM Memory Pool MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { bdcomMemoryPoolGroup }
|
|
|
|
GROUP bdcomMemoryPoolUtilizationGroup
|
|
DESCRIPTION
|
|
"Per memory pool utilization statistics is mandatory for
|
|
the managed system that supports memory pool utilization."
|
|
::= { bdcomMemoryPoolCompliances 2 }
|
|
|
|
|
|
-- units of conformance
|
|
|
|
bdcomMemoryPoolGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bdcomMemoryPoolName,
|
|
bdcomMemoryPoolAlternate,
|
|
bdcomMemoryPoolValid,
|
|
bdcomMemoryPoolUsed,
|
|
bdcomMemoryPoolFree,
|
|
bdcomMemoryPoolLargestFree
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing memory pool monitoring."
|
|
::= { bdcomMemoryPoolGroups 1 }
|
|
|
|
bdcomMemoryPoolUtilizationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bdcomMemoryPoolUtilization1Min,
|
|
bdcomMemoryPoolUtilization5Min,
|
|
bdcomMemoryPoolUtilization10Min
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An optional group providing a collection of memory pool
|
|
utilization objects."
|
|
::= { bdcomMemoryPoolGroups 2 }
|
|
|
|
|
|
END
|