towerops/priv/mibs/arris/DOCS-TEST-MIB

DOCS-TEST-MIB DEFINITIONS ::= BEGIN

  IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
  -- do not import        BITS,
        Integer32,
        enterprises
                FROM SNMPv2-SMI
        TEXTUAL-CONVENTION,
        TruthValue
                FROM SNMPv2-TC
        OBJECT-GROUP,
        MODULE-COMPLIANCE
                FROM SNMPv2-CONF;


-- These are the defined Cablelabs OID paths. Not all are needed for the Test MIB,
-- but included here for sake of completeness.
cableLabs           OBJECT IDENTIFIER ::= { enterprises 4491 }
clabFunction        OBJECT IDENTIFIER ::= { cableLabs 1 }
clabFuncMib2        OBJECT IDENTIFIER ::= { clabFunction 1 }
clabFuncProprietary OBJECT IDENTIFIER ::= { clabFunction 2 }
clabProject         OBJECT IDENTIFIER ::= { cableLabs 2 }
clabProjDocsis      OBJECT IDENTIFIER ::= { clabProject 1 }
clabProjPacketCable OBJECT IDENTIFIER ::= { clabProject 2 }
clabProjOpenCable   OBJECT IDENTIFIER ::= { clabProject 3 }
clabProjCableHome   OBJECT IDENTIFIER ::= { clabProject 4 }


docsTestMIB MODULE-IDENTITY
        LAST-UPDATED    "0203150000Z" -- March 15, 2002
        ORGANIZATION    "DOCSIS 2.0 ATP Working Group"
        CONTACT-INFO
            "        David Raftus
             Postal: Imedia Semiconductor       
                     340 Terry Fox Drive, Suite 202
                     Ottawa Ontario
                     Canada
             Phone:  +1 613 592 1052
             E-mail: david.raftus@imedia.com           

             DOCSIS 2.0 ATP Working Group
             General Discussion: docsis-20@cablelabs.com,
                                 docsis-20-atp@cablelabs.com"
        DESCRIPTION
            "This is the MIB Module supporting programmable test features
             for DOCSIS 2.0 compliant Cable Modems (CM) and Cable Modem 
             Termination Systems (CMTS)."
        -- 4491 is the IANA Cablelabs enterprise number
        ::= { clabProjDocsis 12 }
             


-- Textual Conventions
-- none required yet - dave - leave as a placeholder


-- Mapping path to the test mib.
--
docsTestMibObjects   OBJECT IDENTIFIER ::= { docsTestMIB 1 }
docsTestBaseObjects  OBJECT IDENTIFIER ::= { docsTestMibObjects 1 }
docsTestSetupObjects OBJECT IDENTIFIER ::= { docsTestMibObjects 2 }

--
-- docsTestBaseObjects
--
-- These objects indicate the capability and current status of the
-- programmable test features on the CM/CMTS.
--

docsTestCapability OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Indicates the ability of this device to support the 
             programmable features identified by the TYPE field from
             the CM/CMTS TLV table in [17] and section 3.1.2.
             Each octet within this octet string represents eight tests.
             For example, the first octet represents tests one through eight
             as identified by the TYPE field."
        ::= { docsTestBaseObjects 1 }

docsTestStatus OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Indicates the current operating status of tests initiated 
             through the docsTestSetupObjects. The octet representation is
             identical to that used by docsTestCapability. A bit representation
             of one indicates that a test is currently active, while zero 
             indicates the test is inactive or has completed."
        ::= { docsTestBaseObjects 2 }


--
-- docsTestSetupObjects
--
-- These objects setup the test parameters ands initiate the test.
--

docsTestType OBJECT-TYPE
        SYNTAX      Integer32 (0..1023)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Corresponds to the TYPE field from the CM/CMTS TLV Table
             in [17] and section 3.1.2. The default value of zero indicates
             no test has yet been initiated.
             A WrongValueError should be returned in response to a write
             request for a test not supported by the device. A read request
             will return the docsTestType value last successfully written, 
             whether that test is active or inactive."
        DEFVAL { 0 }
        ::= { docsTestSetupObjects 1 }

docsTestData OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Corresponds to the LENGTH and VALUE fields from the CM/CMTS TLV
             Table in [17] and section 3.1.2. A read request will return the 
             docsTestData value last successfully written, whether that test 
             is active or inactive."
        ::= { docsTestSetupObjects 2 }

docsTestEnable OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Used to initiate or stop the tests setup through the docsTestType
             and docsTestData objects. 
             A CommitFailedError should be returned in response to a TRUE
             Write request if the values in docsTestType and docsTestData are
             incompatible, or a test could not be initiated for any other
             reason."
        ::= { docsTestSetupObjects 3 }




-- Compliance statements

docsTestConformance  OBJECT IDENTIFIER     ::= { docsTestMIB 2 }
docsTestCompliances  OBJECT IDENTIFIER     ::= { docsTestConformance 1 }
docsTestGroups       OBJECT IDENTIFIER     ::= { docsTestConformance 2 }


docsTestBasicCompliance MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION
            "The compliance statement for devices that implement
             the DOCSIS compliant programmable test features."

MODULE  -- docsTestMib

-- unconditionally mandatory groups
MANDATORY-GROUPS {
        docsTestGroup
        } ::= { docsTestCompliances 1 }


docsTestGroup OBJECT-GROUP
        OBJECTS {
            docsTestCapability,
            docsTestStatus,
            docsTestType,
            docsTestData,
            docsTestEnable
        }
        STATUS      current
        DESCRIPTION
            "Group of objects implemented in both Cable Modems and
             Cable Modem Termination Systems."
        ::= { docsTestGroups 1 }


END