Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2002 lines
60 KiB
Text
2002 lines
60 KiB
Text
-- *****************************************************************
|
|
-- BDCOM-QOS-PIB-MIB.my: MIB for QOS Policy
|
|
--
|
|
-- October 2003
|
|
--
|
|
-- Copyright (c) 2003 by BDCOM, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
|
|
BDCOM-QOS-PIB-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Counter64,
|
|
IpAddress
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
TEXTUAL-CONVENTION,
|
|
DisplayString,
|
|
MacAddress,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
|
|
|
|
bdcomPibToMib
|
|
FROM BDCOM-SMI
|
|
;
|
|
|
|
bdcomQosPIBMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200310160000Z"
|
|
ORGANIZATION "BDCOM, Inc."
|
|
CONTACT-INFO
|
|
" Tel: +86-21-50800666
|
|
Postal: No.123,Juli RD,Zhangjiang Hitech Park,
|
|
Shanghai Baud Data Communication Corporation Inc,
|
|
Shanghai City 201203,
|
|
P.R.C "
|
|
DESCRIPTION
|
|
"The BDCOM QOS Policy PIB for provisioning QOS policy."
|
|
REVISION "200310160000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { bdcomPibToMib 1 }
|
|
|
|
-- New textual conventions
|
|
--
|
|
|
|
-- DiffServ Codepoint
|
|
--
|
|
Dscp ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer that is in the range of the DiffServ codepoint
|
|
values."
|
|
SYNTAX INTEGER (0..63)
|
|
|
|
-- Layer 2 CoS
|
|
--
|
|
QosLayer2Cos ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer that is in the range of the layer 2 CoS values.
|
|
This corresponds to the 802.1p and ISL CoS values."
|
|
SYNTAX INTEGER (0..7)
|
|
|
|
-- Supported Queues
|
|
--
|
|
QueueRange ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer that is limited to the number of queues per
|
|
interface supported by the PIB. Limited to 64 which is the
|
|
number of codepoints."
|
|
SYNTAX INTEGER {
|
|
oneQ(1), twoQ(2), threeQ(3), fourQ(4),
|
|
eightQ(8), sixteenQ(16), thirtyTwoQ(32), sixtyFourQ(64)
|
|
}
|
|
|
|
-- Supported Thresholds
|
|
--
|
|
ThresholdSetRange ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer that is limited to the number of threshold sets
|
|
per queue supported by the PIB. A threshold set is a
|
|
collection of parameters describing queue threshold. The
|
|
parameters of a threshold set depend on the drop mechanism the
|
|
queue implements. For example, the threshold set for
|
|
tail-drop comprises a single parameter, the percentage of
|
|
queue size at which dropping occurs. The threshold set for
|
|
WRED comprises two parameters; within the range of the two
|
|
parameters packets are randomly dropped."
|
|
SYNTAX INTEGER {
|
|
zeroT(0), oneT(1), twoT(2), fourT(4), eightT(8)
|
|
}
|
|
|
|
-- Percentage for thresholds, etc.
|
|
--
|
|
Percent ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer that is in the range of a percent value."
|
|
SYNTAX INTEGER (0..100)
|
|
|
|
-- Interface types
|
|
--
|
|
QosInterfaceQueueType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated type for all the known interface types. The
|
|
interface types are currently limited to a predefined
|
|
combination of queues and thresholds such that the product of
|
|
queues and thresholds does not exceed 64 (i.e., the total
|
|
number of DSCPs."
|
|
SYNTAX INTEGER {
|
|
oneQ1t(1), oneQ2t(2), oneQ4t(3), oneQ8t(4),
|
|
twoQ1t(5), twoQ2t(6), twoQ4t(7), twoQ8t(8),
|
|
threeQ1t(9), threeQ2t(10), threeQ4t(11), threeQ8t(12),
|
|
fourQ1t(13), fourQ2t(14), fourQ4t(15), fourQ8t(16),
|
|
eightQ1t(17), eightQ2t(18), eightQ4t(19), eightQ8t(20),
|
|
sixteenQ1t(21), sixteenQ2t(22), sixteenQ4t(23),
|
|
sixtyfourQ1t(24), sixtyfourQ2t(25), sixtyfourQ4t(26),
|
|
oneP1Q0t(27), oneP1Q4t(28), oneP1Q8t(29), oneP2Q1t(30),
|
|
oneP2Q2t(31), oneP3Q1t(32), oneP7Q8t(33)
|
|
}
|
|
|
|
QosInterfaceTypeCapabilities ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumeration of interface capabilities. Used by the PDP to
|
|
select policies and configuration to push to the PEP."
|
|
SYNTAX BITS {
|
|
unspecified (0),
|
|
|
|
-- Classification support
|
|
inputL2Classification (1), inputIpClassification (2),
|
|
outputL2Classification (3), outputIpClassification (4),
|
|
inputPortClassification (19), outputPortClassification (20),
|
|
|
|
-- Policing support
|
|
inputUflowPolicing (5), inputAggregatePolicing (6),
|
|
outputUflowPolicing (7), outputAggregatePolicing (8),
|
|
policeByMarkingDown (9), policeByDropping (10),
|
|
inputUflowShaping (21), inputAggregateShaping (22),
|
|
outputUflowShaping (23), outputAggregateShaping (24),
|
|
|
|
-- Supported scheduling mechanisms
|
|
fifo (11), wrr (12), wfq (13), cq (14), pq (15), cbwfq (16),
|
|
pqWrr (25), pqCbwfq (26),
|
|
|
|
-- Supported congestion control mechanisms
|
|
tailDrop (17), wred (18)
|
|
}
|
|
|
|
-- Role
|
|
--
|
|
-- This TC is commented out since it is not actually used in this
|
|
-- PIB. Nevertheless, the size and character restrictions must still
|
|
-- be enforced
|
|
--
|
|
-- Role ::= TEXTUAL-CONVENTION
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A display string where valid letters are a-z, A-Z, 0-9,
|
|
-- ., - and _. Name can not start with an '_'.
|
|
-- SYNTAX OCTET STRING (SIZE (1..31))
|
|
|
|
-- Role Combination
|
|
--
|
|
RoleCombination ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Display string consisting of a set of roles concatenated
|
|
with a '+' character where the roles are in lexicographic
|
|
order from minimum to maximum."
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
|
|
-- Policy Instance Index
|
|
--
|
|
PolicyInstanceId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual convention for an attribute that is an an
|
|
unsigned integer index attribute of class. It is used for
|
|
attributes that exist for the purpose of providing an integer
|
|
index of an instance.
|
|
|
|
For any integer index that refers to another policy instance,
|
|
that other policy instance must exist. Furthermore, it is an
|
|
error to try to delete a policy instance that is referred to by
|
|
another instance without first deleting the referring
|
|
instance."
|
|
SYNTAX Unsigned32
|
|
|
|
-- Unsigned 64 bit integer
|
|
--
|
|
Unsigned64 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An unsigned 64 bit integer. We use SYNTAX Counter64 for the
|
|
enconding rules."
|
|
SYNTAX Counter64
|
|
|
|
--
|
|
-- Object identifier for conformance statements
|
|
--
|
|
|
|
qosPIBConformance OBJECT IDENTIFIER ::= { bdcomQosPIBMIB 1 }
|
|
|
|
--
|
|
-- Device Config.
|
|
--
|
|
|
|
-- This group contains device configuration information. This
|
|
-- configuration is either set by management or reflects the physical
|
|
-- configuration of the device. This configuration is generally
|
|
-- reported to the PDP (i.e., the policy server so that the PDP can
|
|
-- determine what policies to download to the PEP (i.e., the device).
|
|
|
|
qosDeviceConfig OBJECT IDENTIFIER ::= { bdcomQosPIBMIB 2 }
|
|
|
|
qosDevicePibIncarnationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosDevicePibIncarnationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This class contains a single policy instance that identifies
|
|
the current incarnation of the PIB and the PDP that installed
|
|
this incarnation. The instance of this class is reported to
|
|
the PDP at client connect time so that the PDP can (attempt
|
|
to) ascertain the current state of the PIB."
|
|
::= { qosDeviceConfig 1 }
|
|
|
|
qosDevicePibIncarnationEntry OBJECT-TYPE
|
|
SYNTAX QosDevicePibIncarnationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The single policy instance of this class identifies the
|
|
current incarnation of the PIB and the PDP that installed
|
|
this incarnation."
|
|
INDEX { qosDeviceIncarnationId }
|
|
::= { qosDevicePibIncarnationTable 1 }
|
|
|
|
QosDevicePibIncarnationEntry ::= SEQUENCE {
|
|
qosDeviceIncarnationId PolicyInstanceId,
|
|
qosDevicePdpName DisplayString,
|
|
qosDevicePibIncarnation OCTET STRING,
|
|
qosDevicePibTtl Unsigned32
|
|
}
|
|
|
|
qosDeviceIncarnationId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosDevicePibIncarnationEntry 1 }
|
|
|
|
qosDevicePdpName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the PDP that installed the current incarnation of
|
|
the PIB into the device. By default it is the zero length
|
|
string."
|
|
::= { qosDevicePibIncarnationEntry 2 }
|
|
|
|
qosDevicePibIncarnation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet string to identify the current incarnation. It has
|
|
meaning to the PDP that installed the PIB and perhaps its
|
|
standby PDPs. By default the empty string."
|
|
::= { qosDevicePibIncarnationEntry 3 }
|
|
|
|
qosDevicePibTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds after a client close or TCP timeout for
|
|
which the PEP continues to enforce the policy in the PIB.
|
|
After this interval, the PIB is consired expired and the
|
|
device no longer enforces the policy installed in the PIB."
|
|
::= { qosDevicePibIncarnationEntry 4 }
|
|
|
|
qosDeviceAttributeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosDeviceAttributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The single instance of this class indicates specific
|
|
attributes of the device. These include configuration values
|
|
such as the configured PDP addresses, the maximum message
|
|
size, and specific device capabilities. The latter include
|
|
input port-based and output port-based classification and/or
|
|
policing, support for flow based policing, aggregate based
|
|
policing, traffic shaping capabilities, etc."
|
|
::= { qosDeviceConfig 2 }
|
|
|
|
qosDeviceAttributeEntry OBJECT-TYPE
|
|
SYNTAX QosDeviceAttributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The single instance of this class indicates specific
|
|
attributes of the device."
|
|
INDEX { qosDeviceAttributeId }
|
|
::= { qosDeviceAttributeTable 1 }
|
|
|
|
QosDeviceAttributeEntry ::= SEQUENCE {
|
|
qosDeviceAttributeId PolicyInstanceId,
|
|
qosDevicePepDomain DisplayString,
|
|
qosDevicePrimaryPdp IpAddress,
|
|
qosDeviceSecondaryPdp IpAddress,
|
|
qosDeviceMaxMessageSize Unsigned32,
|
|
qosDeviceCapabilities BITS
|
|
}
|
|
|
|
qosDeviceAttributeId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosDeviceAttributeEntry 1 }
|
|
|
|
qosDevicePepDomain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The QoS domain that this device belongs to. This is
|
|
configured locally on the device (perhaps by some management
|
|
protocol such as SNMP). By default, it is the zero-length
|
|
string."
|
|
::= { qosDeviceAttributeEntry 2 }
|
|
|
|
qosDevicePrimaryPdp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the PDP configured to be the primary PDP for
|
|
the device."
|
|
::= { qosDeviceAttributeEntry 3 }
|
|
|
|
qosDeviceSecondaryPdp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the PDP configured to be the secondary PDP for
|
|
the device. An address of zero indicates no secondary is
|
|
configured."
|
|
::= { qosDeviceAttributeEntry 4 }
|
|
|
|
qosDeviceMaxMessageSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum size message that this PEP is capable of
|
|
receiving in bytes. A value of zero means that the maximum
|
|
message size is unspecified (but does not mean it is
|
|
unlimited). A message greater than this maximum results in a
|
|
MessageTooBig error on a 'no commit' REP."
|
|
::= { qosDeviceAttributeEntry 5 }
|
|
|
|
qosDeviceCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
unspecified (0),
|
|
|
|
-- QoS labels supported
|
|
layer2Cos (1), ipPrecedence (2), dscp (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumeration of device capabilities. Used by the PDP to
|
|
select policies and configuration to push to the PEP."
|
|
::= { qosDeviceAttributeEntry 6 }
|
|
|
|
qosInterfaceTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosInterfaceTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This class describes the interface types of the interfaces
|
|
that exist on the device. It includes the queue type, role
|
|
combination and capabilities of interfaces. The PEP does not
|
|
report which specific interfaces have which characteristics."
|
|
::= { qosDeviceConfig 3 }
|
|
|
|
qosInterfaceTypeEntry OBJECT-TYPE
|
|
SYNTAX QosInterfaceTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class describes a role combination for
|
|
an interface type of an interface that exists on the device."
|
|
INDEX { qosInterfaceTypeId }
|
|
::= { qosInterfaceTypeTable 1 }
|
|
|
|
QosInterfaceTypeEntry ::= SEQUENCE {
|
|
qosInterfaceTypeId PolicyInstanceId,
|
|
qosInterfaceQueueType QosInterfaceQueueType,
|
|
qosInterfaceTypeRoles RoleCombination,
|
|
qosInterfaceTypeCapabilities QosInterfaceTypeCapabilities
|
|
}
|
|
|
|
qosInterfaceTypeId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosInterfaceTypeEntry 1 }
|
|
|
|
qosInterfaceQueueType OBJECT-TYPE
|
|
SYNTAX QosInterfaceQueueType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type in terms of number of queues and
|
|
thresholds."
|
|
::= { qosInterfaceTypeEntry 2 }
|
|
|
|
qosInterfaceTypeRoles OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A combination of roles on at least one interface of type
|
|
qosInterfaceType."
|
|
::= { qosInterfaceTypeEntry 3 }
|
|
|
|
qosInterfaceTypeCapabilities OBJECT-TYPE
|
|
SYNTAX QosInterfaceTypeCapabilities
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumeration of interface capabilities. Used by the PDP to
|
|
select policies and configuration to push to the PEP."
|
|
::= { qosInterfaceTypeEntry 4 }
|
|
|
|
--
|
|
-- General Config for the entire domain.
|
|
--
|
|
|
|
-- Table of DiffServ codepoint mappings
|
|
-- Maps DSCP to marked-down DSCP, IP precedence and CoS
|
|
|
|
qosDomainConfig OBJECT IDENTIFIER ::= { bdcomQosPIBMIB 3 }
|
|
|
|
qosDiffServMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosDiffServMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maps each DSCP to a marked-down DSCP. Also maps each DSCP to
|
|
an IP precedence and QosLayer2Cos. When configured for the
|
|
first time, all 64 entries of the table must be
|
|
specified. Thereafter, instances may be modified (with a
|
|
delete and install in a single decision) but not deleted
|
|
unless all instances are deleted."
|
|
::= { qosDomainConfig 1 }
|
|
|
|
qosDiffServMappingEntry OBJECT-TYPE
|
|
SYNTAX QosDiffServMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class represents mappings from a DSCP."
|
|
INDEX { qosDscp }
|
|
::= { qosDiffServMappingTable 1 }
|
|
|
|
QosDiffServMappingEntry ::= SEQUENCE {
|
|
qosDscp Dscp,
|
|
qosMarkedDscp Dscp,
|
|
qosL2Cos QosLayer2Cos
|
|
}
|
|
|
|
qosDscp OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DSCP for which this entry contains mappings."
|
|
::= { qosDiffServMappingEntry 1 }
|
|
|
|
qosMarkedDscp OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP to use instead of the qosDscp when the packet is out
|
|
of profile and hence marked as such."
|
|
::= { qosDiffServMappingEntry 2 }
|
|
|
|
qosL2Cos OBJECT-TYPE
|
|
SYNTAX QosLayer2Cos
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The L2 CoS value to use when mapping this DSCP to layer 2
|
|
CoS."
|
|
::= { qosDiffServMappingEntry 3 }
|
|
|
|
-- Table of Layer 2 CoS to DSCP mappings
|
|
--
|
|
|
|
qosCosToDscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosCosToDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maps each of eight CoS values to a DSCP. When configured for
|
|
the first time, all 8 entries of the table must be
|
|
specified. Thereafter, instances may be modified (with a
|
|
delete and install in a single decision) but not deleted
|
|
unless all instances are deleted."
|
|
::= { qosDomainConfig 2 }
|
|
|
|
qosCosToDscpEntry OBJECT-TYPE
|
|
SYNTAX QosCosToDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class maps a CoS value to a DSCP."
|
|
INDEX { qosCosToDscpCos }
|
|
::= { qosCosToDscpTable 1 }
|
|
|
|
QosCosToDscpEntry ::= SEQUENCE {
|
|
qosCosToDscpCos QosLayer2Cos,
|
|
qosCosToDscpDscp Dscp
|
|
}
|
|
|
|
qosCosToDscpCos OBJECT-TYPE
|
|
SYNTAX QosLayer2Cos
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The L2 CoS value that is being mapped."
|
|
::= { qosCosToDscpEntry 1 }
|
|
|
|
qosCosToDscpDscp OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP value to use when mapping the L2 CoS to a DSCP."
|
|
::= { qosCosToDscpEntry 2 }
|
|
|
|
--
|
|
-- The Unmatched Policy Table
|
|
--
|
|
|
|
-- This group specifies the policy to apply to an interface for a
|
|
-- given role combination where no other policy matches. More
|
|
-- specifically, the unmatched policy is what is applied to non-IP
|
|
-- packets for which there is no MAC classification, or what is
|
|
-- applied to IP packets that do not match any ACE in any ACL applied
|
|
-- to the interface.
|
|
|
|
qosUnmatchedPolicy OBJECT IDENTIFIER ::= { bdcomQosPIBMIB 4 }
|
|
|
|
qosUnmatchedPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosUnmatchedPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A policy class that specifies what QoS to apply to a packet
|
|
that does not match any other policy configured for this role
|
|
combination for a particular direction of traffic."
|
|
::= { qosUnmatchedPolicy 1 }
|
|
|
|
qosUnmatchedPolicyEntry OBJECT-TYPE
|
|
SYNTAX QosUnmatchedPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies the unmatched policy
|
|
for a particular role combination for incoming or outgoing
|
|
traffic."
|
|
INDEX { qosUnmatchedPolicyId }
|
|
::= { qosUnmatchedPolicyTable 1 }
|
|
|
|
QosUnmatchedPolicyEntry ::= SEQUENCE {
|
|
qosUnmatchedPolicyId PolicyInstanceId,
|
|
qosUnmatchedPolicyRole RoleCombination,
|
|
qosUnmatchedPolicyDirection INTEGER,
|
|
qosUnmatchedPolicyDscp Dscp,
|
|
qosUnmatchedPolicyDscpTrusted TruthValue,
|
|
qosUnmatchPolMicroFlowPolicerId PolicyInstanceId,
|
|
qosUnmatchedPolicyAggregateId PolicyInstanceId
|
|
}
|
|
|
|
qosUnmatchedPolicyId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosUnmatchedPolicyEntry 1 }
|
|
|
|
qosUnmatchedPolicyRole OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Role combination for which this instance applies."
|
|
::= { qosUnmatchedPolicyEntry 2 }
|
|
|
|
qosUnmatchedPolicyDirection OBJECT-TYPE
|
|
SYNTAX INTEGER { in(0), out(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction of packet flow at the interface in question to
|
|
which this instance applies."
|
|
::= { qosUnmatchedPolicyEntry 3 }
|
|
|
|
qosUnmatchedPolicyDscp OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP to classify the unmatched packet with. This must be
|
|
specified even if qosUnmatchedPolicyDscpTrusted is true."
|
|
::= { qosUnmatchedPolicyEntry 4 }
|
|
|
|
qosUnmatchedPolicyDscpTrusted OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this attribute is true, then the Dscp associated with the
|
|
packet is trusted, i.e., it is assumed to have already been
|
|
set. In this case, the Dscp is not rewritten with
|
|
qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored)
|
|
unless this is a non-IP packet and arrives untagged. The
|
|
packet is still policed as part of its micro flow and its
|
|
aggregate flow.
|
|
|
|
When a trusted action is applied to an input interface, the
|
|
Dscp (for an IP packet) or CoS (for a non-IP packet)
|
|
associated with the packet is the one contained in the packet.
|
|
When a trusted action is applied to an output interface, the
|
|
Dscp associated with the packet is the one that is the result
|
|
of the input classification and policing."
|
|
::= { qosUnmatchedPolicyEntry 5 }
|
|
|
|
qosUnmatchPolMicroFlowPolicerId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index identifying the instance of policer to apply to
|
|
unmatched packets. It must correspond to the integer index of
|
|
an instance of class qosPolicerTable or be zero. If zero, the
|
|
microflow is not policed."
|
|
::= { qosUnmatchedPolicyEntry 6 }
|
|
|
|
qosUnmatchedPolicyAggregateId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index identifying the aggregate that the packet belongs
|
|
to. It must correspond to the integer index of an instance of
|
|
class qosAggregateTable or be zero. If zero, the microflow
|
|
does not belong to any aggregate and is not policed as part of
|
|
any aggregate."
|
|
::= { qosUnmatchedPolicyEntry 7 }
|
|
|
|
--
|
|
-- The Policer Group
|
|
--
|
|
|
|
-- This group specifies policer parameters that can then be used by
|
|
-- other groups such as the IP ACL Actions, or the unmatched policy.
|
|
-- This group also defines aggregates that flows can then be assigned
|
|
-- to.
|
|
|
|
qosPolicer OBJECT IDENTIFIER ::= { bdcomQosPIBMIB 5 }
|
|
|
|
-- The Policer Definition Table
|
|
--
|
|
|
|
qosPolicerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPolicerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A class specifying policing parameters for both microflows
|
|
and aggregate flows. This table is designed for policing
|
|
according to a token bucket scheme where an average rate and
|
|
burst size is specified."
|
|
::= { qosPolicer 1 }
|
|
|
|
qosPolicerEntry OBJECT-TYPE
|
|
SYNTAX QosPolicerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies a set of policing
|
|
parameters."
|
|
INDEX { qosPolicerId }
|
|
::= { qosPolicerTable 1 }
|
|
|
|
QosPolicerEntry ::= SEQUENCE {
|
|
qosPolicerId PolicyInstanceId,
|
|
qosPolicerRate Unsigned64,
|
|
qosPolicerNormalBurst Unsigned32,
|
|
qosPolicerExcessBurst Unsigned32,
|
|
qosPolicerAction INTEGER
|
|
}
|
|
|
|
qosPolicerId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosPolicerEntry 1 }
|
|
|
|
qosPolicerRate OBJECT-TYPE
|
|
SYNTAX Unsigned64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The token rate. It is specified in units of bit/s. A rate of
|
|
zero means that all packets will be out of profile. If the
|
|
qosPolicerAction is set to drop then this effectively
|
|
denies any service to packets policed by this policer."
|
|
::= { qosPolicerEntry 2 }
|
|
|
|
qosPolicerNormalBurst OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The normal size of a burst in terms of bits."
|
|
::= { qosPolicerEntry 3 }
|
|
|
|
qosPolicerExcessBurst OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The excess size of a burst in terms of bits."
|
|
::= { qosPolicerEntry 4 }
|
|
|
|
qosPolicerAction OBJECT-TYPE
|
|
SYNTAX INTEGER { drop(0), mark(1), shape(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of how to handle out of profile packets. When
|
|
the shape action is chosen then traffic is shaped to the rate
|
|
specified by qosPolicerRate."
|
|
::= { qosPolicerEntry 5 }
|
|
|
|
-- The Aggregate Table
|
|
--
|
|
|
|
qosAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Instances of this class identify aggregate flows and the
|
|
policer to apply to each."
|
|
::= { qosPolicer 2 }
|
|
|
|
qosAggregateEntry OBJECT-TYPE
|
|
SYNTAX QosAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies the policer to apply to
|
|
an aggregate flow."
|
|
INDEX { qosAggregateId }
|
|
::= { qosAggregateTable 1 }
|
|
|
|
QosAggregateEntry ::= SEQUENCE {
|
|
qosAggregateId PolicyInstanceId,
|
|
qosAggregatePolicerId PolicyInstanceId
|
|
}
|
|
|
|
qosAggregateId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosAggregateEntry 1 }
|
|
|
|
qosAggregatePolicerId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index identifying the instance of policer to apply to the
|
|
aggregate. It must correspond to the integer index of an
|
|
instance of class qosPolicerTable."
|
|
::= { qosAggregateEntry 2 }
|
|
|
|
--
|
|
-- MAC DA Classification Group
|
|
--
|
|
|
|
-- This group determines the CoS to assign to a MAC frame on the
|
|
-- basis of the destination MAC address. There is no provision for
|
|
-- policing or rate limiting at layer 2.
|
|
|
|
qosMacQos OBJECT IDENTIFIER ::= { bdcomQosPIBMIB 6 }
|
|
|
|
qosMacClassificationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosMacClassificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A class of MAC/Vlan tuples and their associated CoS values."
|
|
::= { qosMacQos 1 }
|
|
|
|
qosMacClassificationEntry OBJECT-TYPE
|
|
SYNTAX QosMacClassificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies the mapping of a VLAN
|
|
and a MAC address to a CoS value."
|
|
INDEX { qosMacClassificationId }
|
|
::= { qosMacClassificationTable 1 }
|
|
|
|
QosMacClassificationEntry ::= SEQUENCE {
|
|
qosMacClassificationId PolicyInstanceId,
|
|
qosDstMacVlan INTEGER,
|
|
qosDstMacAddress MacAddress,
|
|
qosDstMacCos QosLayer2Cos
|
|
}
|
|
|
|
qosMacClassificationId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosMacClassificationEntry 1 }
|
|
|
|
qosDstMacVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN of the destination MAC address of the L2 frame."
|
|
::= { qosMacClassificationEntry 2 }
|
|
|
|
qosDstMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address of the L2 frame."
|
|
::= { qosMacClassificationEntry 3 }
|
|
|
|
qosDstMacCos OBJECT-TYPE
|
|
SYNTAX QosLayer2Cos
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CoS to assign the packet with the associated MAC/VLAN
|
|
tuple. Note that this CoS is overridden by the policies to
|
|
classify the frame at layer 3 if there are any."
|
|
::= { qosMacClassificationEntry 4 }
|
|
|
|
--
|
|
-- The IP Classification and Policing Group
|
|
--
|
|
|
|
qosIpQos OBJECT IDENTIFIER ::= { bdcomQosPIBMIB 7 }
|
|
|
|
-- The ACE Table
|
|
--
|
|
|
|
qosIpAceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIpAceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACE definitions."
|
|
::= { qosIpQos 1 }
|
|
|
|
qosIpAceEntry OBJECT-TYPE
|
|
SYNTAX QosIpAceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies an ACE."
|
|
INDEX { qosIpAceId }
|
|
::= { qosIpAceTable 1 }
|
|
|
|
QosIpAceEntry ::= SEQUENCE {
|
|
qosIpAceId PolicyInstanceId,
|
|
qosIpAceDstAddr IpAddress,
|
|
qosIpAceDstAddrMask IpAddress,
|
|
qosIpAceSrcAddr IpAddress,
|
|
qosIpAceSrcAddrMask IpAddress,
|
|
qosIpAceDscpMin Dscp,
|
|
qosIpAceDscpMax Dscp,
|
|
qosIpAceProtocol INTEGER,
|
|
qosIpAceDstL4PortMin INTEGER,
|
|
qosIpAceDstL4PortMax INTEGER,
|
|
qosIpAceSrcL4PortMin INTEGER,
|
|
qosIpAceSrcL4PortMax INTEGER,
|
|
qosIpAcePermit TruthValue
|
|
}
|
|
|
|
qosIpAceId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIpAceEntry 1 }
|
|
|
|
qosIpAceDstAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address to match against the packet's destination IP
|
|
address."
|
|
::= { qosIpAceEntry 2 }
|
|
|
|
qosIpAceDstAddrMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mask for the matching of the destination IP address."
|
|
::= { qosIpAceEntry 3 }
|
|
|
|
qosIpAceSrcAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address to match against the packet's source IP
|
|
address."
|
|
::= { qosIpAceEntry 4 }
|
|
|
|
qosIpAceSrcAddrMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mask for the matching of the source IP address."
|
|
::= { qosIpAceEntry 5 }
|
|
|
|
qosIpAceDscpMin OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value that the DSCP in the packet can have and
|
|
match this ACE."
|
|
::= { qosIpAceEntry 6 }
|
|
|
|
qosIpAceDscpMax OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value that the DSCP in the packet can have and
|
|
match this ACE."
|
|
::= { qosIpAceEntry 7 }
|
|
|
|
qosIpAceProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP protocol to match against the packet's protocol.
|
|
A value of zero means match all."
|
|
::= { qosIpAceEntry 8 }
|
|
|
|
qosIpAceDstL4PortMin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value that the packet's layer 4 dest port number
|
|
can have and match this ACE."
|
|
::= { qosIpAceEntry 9 }
|
|
|
|
qosIpAceDstL4PortMax OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value that the packet's layer 4 dest port number
|
|
can have and match this ACE."
|
|
::= { qosIpAceEntry 10 }
|
|
|
|
qosIpAceSrcL4PortMin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value that the packet's layer 4 source port
|
|
number can have and match this ACE."
|
|
::= { qosIpAceEntry 11 }
|
|
|
|
qosIpAceSrcL4PortMax OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value that the packet's layer 4 source port
|
|
number can have and match this ACE."
|
|
::= { qosIpAceEntry 12 }
|
|
|
|
qosIpAcePermit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the packet matches this ACE and the value of this attribute
|
|
is true, then the matching process terminates and the QoS
|
|
associated with this ACE (indirectly through the ACL) is
|
|
applied to the packet. If the value of this attribute is false,
|
|
then no more ACEs in this ACL are compared to this packet and
|
|
matching continues with the first ACE of the next ACL."
|
|
::= { qosIpAceEntry 13 }
|
|
|
|
-- The ACL Definition Table
|
|
--
|
|
|
|
qosIpAclDefinitionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIpAclDefinitionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A class that defines a set of ACLs each being an ordered list
|
|
of ACEs."
|
|
::= { qosIpQos 2 }
|
|
|
|
qosIpAclDefinitionEntry OBJECT-TYPE
|
|
SYNTAX QosIpAclDefinitionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies an ACE in an ACL and its
|
|
order with respect to other ACEs in the same ACL."
|
|
INDEX { qosIpAclDefinitionId }
|
|
::= { qosIpAclDefinitionTable 1 }
|
|
|
|
QosIpAclDefinitionEntry ::= SEQUENCE {
|
|
qosIpAclDefinitionId PolicyInstanceId,
|
|
qosIpAclId PolicyInstanceId,
|
|
qosIpAceOrder Unsigned32,
|
|
qosIpAclDefAceId PolicyInstanceId
|
|
}
|
|
|
|
qosIpAclDefinitionId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIpAclDefinitionEntry 1 }
|
|
|
|
qosIpAclId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index for this ACL. There will be one instance of
|
|
policy class qosIpAclDefinition with this integer index for
|
|
each ACE in the ACL per role combination."
|
|
::= { qosIpAclDefinitionEntry 2 }
|
|
|
|
qosIpAceOrder OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer that determines the position of this ACE in the ACL.
|
|
An ACE with a given order is positioned in the access contol
|
|
list before one with a higher order."
|
|
::= { qosIpAclDefinitionEntry 3 }
|
|
|
|
qosIpAclDefAceId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the ACE in the qosIpAceTable that is
|
|
in the ACL specified by qosIpAclId at the position specified
|
|
by qosIpAceOrder."
|
|
::= { qosIpAclDefinitionEntry 4 }
|
|
|
|
-- The ACL Action Table
|
|
--
|
|
|
|
qosIpAclActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIpAclActionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A class that applies a set of ACLs to interfaces specifying,
|
|
for each interface the order of the ACL with respect to other
|
|
ACLs applied to the same interface and, for each ACL the
|
|
action to take for a packet that matches a permit ACE in that
|
|
ACL. Interfaces are specified abstractly in terms of
|
|
interface role combinations."
|
|
::= { qosIpQos 3 }
|
|
|
|
qosIpAclActionEntry OBJECT-TYPE
|
|
SYNTAX QosIpAclActionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class applies an ACL to traffic in a
|
|
particular direction on an interface with a particular role
|
|
combination, and specifies the action for packets which match
|
|
the ACL."
|
|
INDEX { qosIpAclActionId }
|
|
::= { qosIpAclActionTable 1 }
|
|
|
|
QosIpAclActionEntry ::= SEQUENCE {
|
|
qosIpAclActionId PolicyInstanceId,
|
|
qosIpAclActAclId PolicyInstanceId,
|
|
qosIpAclInterfaceRoles RoleCombination,
|
|
qosIpAclInterfaceDirection INTEGER,
|
|
qosIpAclOrder Unsigned32,
|
|
qosIpAclDscp Dscp,
|
|
qosIpAclDscpTrusted TruthValue,
|
|
qosIpAclMicroFlowPolicerId PolicyInstanceId,
|
|
qosIpAclAggregateId PolicyInstanceId
|
|
}
|
|
|
|
qosIpAclActionId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIpAclActionEntry 1 }
|
|
|
|
qosIpAclActAclId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL associated with this action."
|
|
::= { qosIpAclActionEntry 2 }
|
|
|
|
qosIpAclInterfaceRoles OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interfaces to which this ACL applies specified in terms
|
|
of a set of roles."
|
|
::= { qosIpAclActionEntry 3 }
|
|
|
|
qosIpAclInterfaceDirection OBJECT-TYPE
|
|
SYNTAX INTEGER { in(0), out(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction of packet flow at the interface in question to
|
|
which this ACL applies."
|
|
::= { qosIpAclActionEntry 4 }
|
|
|
|
qosIpAclOrder OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer that determines the order of this ACL in the list
|
|
of ACLs applied to interfaces of the specified role
|
|
combination. An ACL with a given order is positioned in the
|
|
list before one with a higher order."
|
|
::= { qosIpAclActionEntry 5 }
|
|
|
|
qosIpAclDscp OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP to classify the packet with in the event that the
|
|
packet matches an ACE in this ACL and the ACE is a permit."
|
|
::= { qosIpAclActionEntry 6 }
|
|
|
|
qosIpAclDscpTrusted OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this attribute is true, then the Dscp associated with
|
|
the packet is trusted, i.e., it is assumed to have already
|
|
been set. In this case, the Dscp is not rewritten with
|
|
qosIpAclDscp (qosIpAclDscp is ignored). The packet is still
|
|
policed as part of its micro flow and its aggregate flow.
|
|
|
|
When a trusted action is applied to an input interface, the
|
|
Dscp associated with the packet is the one contained in the
|
|
packet. When a trusted action is applied to an output
|
|
interface, the Dscp associated with the packet is the one that
|
|
is the result of the input classification and policing."
|
|
::= { qosIpAclActionEntry 7 }
|
|
|
|
qosIpAclMicroFlowPolicerId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index identifying the instance of policer to apply to the
|
|
microflow. It must correspond to the integer index of an
|
|
instance of class qosPolicerTableor be zero. If zero, the
|
|
microflow is not policed."
|
|
::= { qosIpAclActionEntry 8 }
|
|
|
|
qosIpAclAggregateId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index identifying the aggregate that the packet belongs
|
|
to. It must correspond to the integer index of an instance of
|
|
class qosAggregateTable or be zero. If zero, the microflow
|
|
does not belong to any aggregate and is not policed as part of
|
|
any aggregate."
|
|
::= { qosIpAclActionEntry 9 }
|
|
|
|
--
|
|
-- QoS Interface Group
|
|
--
|
|
|
|
-- This group specifies the configuration of the various interface
|
|
-- types including the setting of thresholds, queueing parameters,
|
|
-- mapping of DSCPs to queues and thresholds, etc.
|
|
|
|
qosIfParameters OBJECT IDENTIFIER ::= { bdcomQosPIBMIB 8 }
|
|
|
|
-- Table of scheduling discipline preferences
|
|
--
|
|
|
|
qosIfSchedulingPreferencesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIfSchedulingPreferenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This class specifies the scheduling preference an interface
|
|
chooses if it supports multiple scheduling types. Higher
|
|
values are preferred over lower values."
|
|
::= { qosIfParameters 1 }
|
|
|
|
qosIfSchedulingPreferenceEntry OBJECT-TYPE
|
|
SYNTAX QosIfSchedulingPreferenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies a scheduling preference
|
|
for a queue-type on an interface with a particular role
|
|
combination."
|
|
INDEX { qosIfSchedulingPreferenceId }
|
|
::= { qosIfSchedulingPreferencesTable 1 }
|
|
|
|
QosIfSchedulingPreferenceEntry ::= SEQUENCE {
|
|
qosIfSchedulingPreferenceId PolicyInstanceId,
|
|
qosIfSchedulingRoles RoleCombination,
|
|
qosIfSchedulingPreference INTEGER,
|
|
qosIfSchedulingDiscipline INTEGER,
|
|
qosIfSchedulingQueueType QosInterfaceQueueType
|
|
}
|
|
|
|
qosIfSchedulingPreferenceId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIfSchedulingPreferenceEntry 1 }
|
|
|
|
qosIfSchedulingRoles OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The combination of roles the interface must have for this
|
|
policy instance to apply to that interface."
|
|
::= { qosIfSchedulingPreferenceEntry 2 }
|
|
|
|
qosIfSchedulingPreference OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference to use this scheduling discipline and queue
|
|
type. A higher value means a higher preference. If two
|
|
disciplines have the same preference the choice is a local
|
|
decision."
|
|
::= { qosIfSchedulingPreferenceEntry 3 }
|
|
|
|
qosIfSchedulingDiscipline OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
weightedFairQueueing (1),
|
|
weightedRoundRobin (2),
|
|
customQueueing (3),
|
|
priorityQueueing (4),
|
|
classBasedWFQ (5),
|
|
fifo (6),
|
|
pqWrr (7),
|
|
pqCbwfq (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerate type for all the known scheduling disciplines."
|
|
::= { qosIfSchedulingPreferenceEntry 4 }
|
|
|
|
qosIfSchedulingQueueType OBJECT-TYPE
|
|
SYNTAX QosInterfaceQueueType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue type of this preference."
|
|
::= { qosIfSchedulingPreferenceEntry 5 }
|
|
|
|
-- Table of drop mechanism preferences
|
|
--
|
|
|
|
qosIfDropPreferenceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIfDropPreferenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This class specifies the preference of the drop mechanism an
|
|
interface chooses if it supports multiple drop mechanisms.
|
|
Higher values are preferred over lower values."
|
|
::= { qosIfParameters 2 }
|
|
|
|
qosIfDropPreferenceEntry OBJECT-TYPE
|
|
SYNTAX QosIfDropPreferenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies a drop preference for
|
|
a drop mechanism on an interface with a particular role
|
|
combination."
|
|
INDEX { qosIfDropPreferenceId }
|
|
::= { qosIfDropPreferenceTable 1 }
|
|
|
|
QosIfDropPreferenceEntry ::= SEQUENCE {
|
|
qosIfDropPreferenceId PolicyInstanceId,
|
|
qosIfDropRoles RoleCombination,
|
|
qosIfDropPreference INTEGER,
|
|
qosIfDropDiscipline INTEGER
|
|
}
|
|
|
|
qosIfDropPreferenceId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIfDropPreferenceEntry 1 }
|
|
|
|
qosIfDropRoles OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The combination of roles the interface must have for this
|
|
policy instance to apply to that interface."
|
|
::= { qosIfDropPreferenceEntry 2 }
|
|
|
|
qosIfDropPreference OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference to use this drop mechanism. A higher value
|
|
means a higher preference. If two mechanisms have the same
|
|
preference the choice is a local decision."
|
|
::= { qosIfDropPreferenceEntry 3 }
|
|
|
|
qosIfDropDiscipline OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qosIfDropWRED (1),
|
|
qosIfDropTailDrop (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerate type for all the known drop mechanisms."
|
|
::= { qosIfDropPreferenceEntry 4 }
|
|
|
|
-- The Assignment of DSCPs to queues and thresholds for each interface
|
|
-- type.
|
|
--
|
|
|
|
qosIfDscpAssignmentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIfDscpAssignmentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The assignment of each DSCP to a queue and threshold for each
|
|
interface queue type."
|
|
::= { qosIfParameters 3 }
|
|
|
|
qosIfDscpAssignmentEntry OBJECT-TYPE
|
|
SYNTAX QosIfDscpAssignmentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies the queue and threshold
|
|
set for a packet with a particular DSCP on an interface of
|
|
a particular type with a particular role combination."
|
|
INDEX { qosIfDscpAssignmentId }
|
|
::= { qosIfDscpAssignmentTable 1 }
|
|
|
|
QosIfDscpAssignmentEntry ::= SEQUENCE {
|
|
qosIfDscpAssignmentId PolicyInstanceId,
|
|
qosIfDscpRoles RoleCombination,
|
|
qosIfQueueType QosInterfaceQueueType,
|
|
qosIfDscp Dscp,
|
|
qosIfQueue INTEGER,
|
|
qosIfThresholdSet INTEGER
|
|
}
|
|
|
|
qosIfDscpAssignmentId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIfDscpAssignmentEntry 1 }
|
|
|
|
qosIfDscpRoles OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The role combination the interface must be configured with."
|
|
::= { qosIfDscpAssignmentEntry 2 }
|
|
|
|
qosIfQueueType OBJECT-TYPE
|
|
SYNTAX QosInterfaceQueueType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface queue type to which this row applies."
|
|
::= { qosIfDscpAssignmentEntry 3 }
|
|
|
|
qosIfDscp OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP to which this row applies."
|
|
::= { qosIfDscpAssignmentEntry 4 }
|
|
|
|
qosIfQueue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue to which the DSCP applies for the given interface
|
|
type."
|
|
::= { qosIfDscpAssignmentEntry 5 }
|
|
|
|
qosIfThresholdSet OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold set of the specified queue to which the DSCP
|
|
applies for the given interface type."
|
|
::= { qosIfDscpAssignmentEntry 6 }
|
|
|
|
-- The configuration of RED thresholds
|
|
--
|
|
|
|
qosIfRedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIfRedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A class of lower and upper values for each threshold set in a
|
|
queue supporting WRED. If the size of the queue for a given
|
|
threshold is below the lower value then packets assigned to
|
|
that threshold are always accepted into the queue. If the
|
|
size of the queue is above upper value then packets are always
|
|
dropped. If the size of the queue is between the lower and
|
|
the upper then packets are randomly dropped."
|
|
::= { qosIfParameters 4 }
|
|
|
|
qosIfRedEntry OBJECT-TYPE
|
|
SYNTAX QosIfRedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies threshold limits for a
|
|
particular RED threshold of a given threshold set on an
|
|
interface and with a particular role combination."
|
|
INDEX { qosIfRedId }
|
|
::= { qosIfRedTable 1 }
|
|
|
|
QosIfRedEntry ::= SEQUENCE {
|
|
qosIfRedId PolicyInstanceId,
|
|
qosIfRedRoles RoleCombination,
|
|
qosIfRedNumThresholdSets ThresholdSetRange,
|
|
qosIfRedThresholdSet INTEGER,
|
|
qosIfRedThresholdSetLower Percent,
|
|
qosIfRedThresholdSetUpper Percent
|
|
}
|
|
|
|
qosIfRedId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIfRedEntry 1 }
|
|
|
|
qosIfRedRoles OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The role combination the interface must be configured with."
|
|
::= { qosIfRedEntry 2 }
|
|
|
|
qosIfRedNumThresholdSets OBJECT-TYPE
|
|
SYNTAX ThresholdSetRange
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The values in this entry apply only to queues with the number
|
|
of thresholds specified by this attribute."
|
|
::= { qosIfRedEntry 3 }
|
|
|
|
qosIfRedThresholdSet OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold set to which the lower and upper values apply.
|
|
It must be in the range 1 through qosIfRedNumThresholdSets.
|
|
There must be exactly one PRI for each value in this range."
|
|
::= { qosIfRedEntry 4 }
|
|
|
|
qosIfRedThresholdSetLower OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold value below which no packets are dropped."
|
|
::= { qosIfRedEntry 5 }
|
|
|
|
qosIfRedThresholdSetUpper OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold value above which all packets are dropped."
|
|
::= { qosIfRedEntry 6 }
|
|
|
|
-- The configuration of tail drop thresholds
|
|
--
|
|
|
|
qosIfTailDropTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIfTailDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A class for threshold sets in a queue supporting tail drop.
|
|
If the size of the queue for a given threshold set is at or
|
|
below the specified value then packets assigned to that
|
|
threshold set are always accepted into the queue. If the size
|
|
of the queue is above the specified value then packets are
|
|
always dropped."
|
|
::= { qosIfParameters 5 }
|
|
|
|
qosIfTailDropEntry OBJECT-TYPE
|
|
SYNTAX QosIfTailDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies the queue depth for a
|
|
particular tail-drop threshold set on an interface with a
|
|
particular role combination."
|
|
INDEX { qosIfTailDropId }
|
|
::= { qosIfTailDropTable 1 }
|
|
|
|
QosIfTailDropEntry ::= SEQUENCE {
|
|
qosIfTailDropId PolicyInstanceId,
|
|
qosIfTailDropRoles RoleCombination,
|
|
qosIfTailDropNumThresholdSets ThresholdSetRange,
|
|
qosIfTailDropThresholdSet INTEGER,
|
|
qosIfTailDropThresholdSetValue Percent
|
|
}
|
|
|
|
qosIfTailDropId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIfTailDropEntry 1 }
|
|
|
|
qosIfTailDropRoles OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The role combination the interface must be configured with."
|
|
::= { qosIfTailDropEntry 2 }
|
|
|
|
qosIfTailDropNumThresholdSets OBJECT-TYPE
|
|
SYNTAX ThresholdSetRange
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value in this entry applies only to queues with the
|
|
number of thresholds specified by this attribute."
|
|
::= { qosIfTailDropEntry 3 }
|
|
|
|
qosIfTailDropThresholdSet OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold set to which the threshold value applies"
|
|
::= { qosIfTailDropEntry 4 }
|
|
|
|
qosIfTailDropThresholdSetValue OBJECT-TYPE
|
|
SYNTAX Percent
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold value above which packets are dropped."
|
|
::= { qosIfTailDropEntry 5 }
|
|
|
|
-- Weights for interfaces that support WRR, WFQ, CBWFQ, etc.
|
|
--
|
|
|
|
qosIfWeightsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosIfWeightsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A class of scheduling weights for each queue of an interface
|
|
that supports weighted round robin scheduling or a mix of
|
|
priority queueing and weighted round robin. For a queue with
|
|
N priority queues, the N highest queue numbers are the
|
|
priority queues with the highest queue number having the
|
|
highest priority. WRR is applied to the non-priority queues."
|
|
::= { qosIfParameters 6 }
|
|
|
|
qosIfWeightsEntry OBJECT-TYPE
|
|
SYNTAX QosIfWeightsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An instance of this class specifies the scheduling weight for
|
|
a particular queue of an interface with a particular number
|
|
of queues and with a particular role combination."
|
|
INDEX { qosIfWeightsId }
|
|
::= { qosIfWeightsTable 1 }
|
|
|
|
QosIfWeightsEntry ::= SEQUENCE {
|
|
qosIfWeightsId PolicyInstanceId,
|
|
qosIfWeightsRoles RoleCombination,
|
|
qosIfWeightsNumQueues QueueRange,
|
|
qosIfWeightsQueue INTEGER,
|
|
qosIfWeightsDrainSize Unsigned32,
|
|
qosIfWeightsQueueSize Unsigned32
|
|
}
|
|
|
|
qosIfWeightsId OBJECT-TYPE
|
|
SYNTAX PolicyInstanceId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer index to identify the instance of the policy class."
|
|
::= { qosIfWeightsEntry 1 }
|
|
|
|
qosIfWeightsRoles OBJECT-TYPE
|
|
SYNTAX RoleCombination
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The role combination the interface must be configured with."
|
|
::= { qosIfWeightsEntry 2 }
|
|
|
|
qosIfWeightsNumQueues OBJECT-TYPE
|
|
SYNTAX QueueRange
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the weight in this instance applies only to
|
|
interfaces with the number of queues specified by this
|
|
attribute."
|
|
::= { qosIfWeightsEntry 3 }
|
|
|
|
qosIfWeightsQueue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue to which the weight applies."
|
|
::= { qosIfWeightsEntry 4 }
|
|
|
|
qosIfWeightsDrainSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of bytes that may be drained from the
|
|
queue in one cycle. The percentage of the bandwith allocated
|
|
to this queue can be calculated from this attribute and the
|
|
sum of the drain sizes of all the non-priority queues of the
|
|
interface."
|
|
::= { qosIfWeightsEntry 5 }
|
|
|
|
qosIfWeightsQueueSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the queue in bytes. Some devices set queue size
|
|
in terms of packets. These devices must calculate the queue
|
|
size in packets by assuming an average packet size suitable
|
|
for the particular interface.
|
|
|
|
Some devices have a fixed size buffer to be shared among all
|
|
queues. These devices must allocate a fraction of the
|
|
total buffer space to this queue calculated as the the ratio
|
|
of the queue size to the sum of the queue sizes for the
|
|
interface."
|
|
::= { qosIfWeightsEntry 6 }
|
|
|
|
qosPIBCompliances OBJECT IDENTIFIER ::= { qosPIBConformance 1 }
|
|
qosPIBGroups OBJECT IDENTIFIER ::= { qosPIBConformance 2 }
|
|
|
|
-- Compliance
|
|
|
|
qosPIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the QOS Policy Derived MIB."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
qosDevicePibIncarnationTableGroup,
|
|
qosDeviceAttributeTableGroup,
|
|
qosInterfaceTypeTableGroup
|
|
}
|
|
::= { qosPIBCompliances 1 }
|
|
|
|
qosDevicePibIncarnationTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosDevicePdpName,
|
|
qosDevicePibIncarnation,
|
|
qosDevicePibTtl
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 1 }
|
|
|
|
qosDeviceAttributeTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosDevicePepDomain,
|
|
qosDevicePrimaryPdp,
|
|
qosDeviceSecondaryPdp,
|
|
qosDeviceMaxMessageSize,
|
|
qosDeviceCapabilities
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 2 }
|
|
|
|
qosInterfaceTypeTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosInterfaceQueueType,
|
|
qosInterfaceTypeRoles,
|
|
qosInterfaceTypeCapabilities
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 3 }
|
|
|
|
qosDiffServMappingTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosMarkedDscp,
|
|
qosL2Cos
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 4 }
|
|
|
|
qosCosToDscpTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosCosToDscpDscp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 5 }
|
|
|
|
qosUnmatchedPolicyTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosUnmatchedPolicyRole,
|
|
qosUnmatchedPolicyDirection,
|
|
qosUnmatchedPolicyDscp,
|
|
qosUnmatchedPolicyDscpTrusted,
|
|
qosUnmatchPolMicroFlowPolicerId,
|
|
qosUnmatchedPolicyAggregateId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 6 }
|
|
|
|
qosPolicerTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosPolicerRate,
|
|
qosPolicerNormalBurst,
|
|
qosPolicerExcessBurst,
|
|
qosPolicerAction
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 7 }
|
|
|
|
qosAggregateTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosAggregatePolicerId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 8 }
|
|
|
|
qosMacClassificationTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosDstMacVlan,
|
|
qosDstMacAddress,
|
|
qosDstMacCos
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 9 }
|
|
|
|
qosIpAceTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIpAceDstAddr,
|
|
qosIpAceDstAddrMask,
|
|
qosIpAceSrcAddr,
|
|
qosIpAceSrcAddrMask,
|
|
qosIpAceDscpMin,
|
|
qosIpAceDscpMax,
|
|
qosIpAceProtocol,
|
|
qosIpAceDstL4PortMin,
|
|
qosIpAceDstL4PortMax,
|
|
qosIpAceSrcL4PortMin,
|
|
qosIpAceSrcL4PortMax,
|
|
qosIpAcePermit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 10 }
|
|
|
|
qosIpAclDefinitionTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIpAclId,
|
|
qosIpAceOrder,
|
|
qosIpAclDefAceId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 11 }
|
|
|
|
qosIpAclActionTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIpAclActAclId,
|
|
qosIpAclInterfaceRoles,
|
|
qosIpAclInterfaceDirection,
|
|
qosIpAclOrder,
|
|
qosIpAclDscp,
|
|
qosIpAclDscpTrusted,
|
|
qosIpAclMicroFlowPolicerId,
|
|
qosIpAclAggregateId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 12 }
|
|
|
|
qosIfSchedulingPreferencesTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIfSchedulingRoles,
|
|
qosIfSchedulingPreference,
|
|
qosIfSchedulingDiscipline,
|
|
qosIfSchedulingQueueType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 13 }
|
|
|
|
qosIfDropPreferenceTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIfDropRoles,
|
|
qosIfDropPreference,
|
|
qosIfDropDiscipline
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 14 }
|
|
|
|
qosIfDscpAssignmentTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIfDscpRoles,
|
|
qosIfQueueType,
|
|
qosIfDscp,
|
|
qosIfQueue,
|
|
qosIfThresholdSet
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 15 }
|
|
|
|
qosIfRedTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIfRedRoles,
|
|
qosIfRedNumThresholdSets,
|
|
qosIfRedThresholdSet,
|
|
qosIfRedThresholdSetLower,
|
|
qosIfRedThresholdSetUpper
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 16 }
|
|
|
|
qosIfTailDropTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIfTailDropRoles,
|
|
qosIfTailDropNumThresholdSets,
|
|
qosIfTailDropThresholdSet,
|
|
qosIfTailDropThresholdSetValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 17 }
|
|
|
|
qosIfWeightsTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
qosIfWeightsRoles,
|
|
qosIfWeightsNumQueues,
|
|
qosIfWeightsQueue,
|
|
qosIfWeightsDrainSize,
|
|
qosIfWeightsQueueSize
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { qosPIBGroups 18 }
|
|
|
|
END
|