Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1850 lines
68 KiB
Text
1850 lines
68 KiB
Text
DISMAN-TRACEROUTE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
|
|
Gauge32, Unsigned32, mib-2,
|
|
NOTIFICATION-TYPE,
|
|
OBJECT-IDENTITY
|
|
FROM SNMPv2-SMI -- RFC2578
|
|
RowStatus, StorageType,
|
|
TruthValue, DateAndTime
|
|
FROM SNMPv2-TC -- RFC2579
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC2580
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC3411
|
|
InterfaceIndexOrZero -- RFC2863
|
|
FROM IF-MIB
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB -- RFC4001
|
|
OperationResponseStatus
|
|
FROM DISMAN-PING-MIB; -- RFC4560
|
|
|
|
traceRouteMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200606130000Z" -- 13 June 2006
|
|
ORGANIZATION "IETF Distributed Management Working Group"
|
|
CONTACT-INFO
|
|
"Juergen Quittek
|
|
|
|
NEC Europe Ltd.
|
|
Network Laboratories
|
|
Kurfuersten-Anlage 36
|
|
69115 Heidelberg
|
|
Germany
|
|
|
|
Phone: +49 6221 4342-115
|
|
Email: quittek@netlab.nec.de"
|
|
DESCRIPTION
|
|
"The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides
|
|
access to the traceroute capability at a remote host.
|
|
|
|
Copyright (C) The Internet Society (2006). This version of
|
|
this MIB module is part of RFC 4560; see the RFC itself for
|
|
full legal notices."
|
|
|
|
-- Revision history
|
|
|
|
REVISION "200606130000Z" -- 13 June 2006
|
|
DESCRIPTION
|
|
"Updated version, published as RFC 4560.
|
|
- Correctly considered IPv6 in DESCRIPTION clause of
|
|
object traceRouteCtlDataSize
|
|
- Replaced references to RFC 2575 by RFC 3415
|
|
- Replaced references to RFC 2571 by RFC 3411
|
|
- Replaced references to RFC 2851 by RFC 4001
|
|
- Clarified DESCRIPTION clause of object
|
|
traceRouteResultsLastGoodPath
|
|
- Changed range of object traceRouteCtlInitialTtl
|
|
from (0..255) to (1..255)
|
|
- Extended DESCRIPTION clause of traceRouteResultsTable
|
|
describing re-initialization of entries
|
|
- Changed SYNTAX of traceRouteResultsTestAttempts and
|
|
traceRouteResultsTestSuccesses from Unsigned32 to
|
|
Gauge32
|
|
- Changed status of traceRouteCompliance to deprecated
|
|
- Added traceRouteFullCompliance and
|
|
traceRouteMinimumCompliance
|
|
- Changed status of traceRouteGroup and
|
|
traceRouteTimeStampGroup to deprecated
|
|
- Added traceRouteMinimumGroup,
|
|
traceRouteCtlRowStatusGroup, and
|
|
traceRouteHistoryGroup
|
|
- Changed DEFVAL of object
|
|
traceRouteCtlTargetAddressType from { ipv4 }
|
|
to { unknown }
|
|
- Changed DEFVAL of object traceRouteCtlDescr
|
|
from { '00'H } to { ''H }
|
|
- Added DEFVAL for object traceRouteCtlTrapGeneration
|
|
of DEFVAL { { } }"
|
|
REVISION "200009210000Z" -- 21 September 2000
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 2925."
|
|
::= { mib-2 81 }
|
|
|
|
-- Top level structure of the MIB
|
|
|
|
traceRouteNotifications OBJECT IDENTIFIER ::= { traceRouteMIB 0 }
|
|
traceRouteObjects OBJECT IDENTIFIER ::= { traceRouteMIB 1 }
|
|
traceRouteConformance OBJECT IDENTIFIER ::= { traceRouteMIB 2 }
|
|
|
|
-- The registration node (point) for traceroute implementation types
|
|
|
|
traceRouteImplementationTypeDomains OBJECT IDENTIFIER
|
|
::= { traceRouteMIB 3 }
|
|
|
|
traceRouteUsingUdpProbes OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that an implementation is using UDP probes to
|
|
perform the traceroute operation."
|
|
::= { traceRouteImplementationTypeDomains 1 }
|
|
|
|
-- Simple Object Definitions
|
|
|
|
traceRouteMaxConcurrentRequests OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "requests"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of concurrent active traceroute requests
|
|
that are allowed within an agent implementation. A value
|
|
of 0 for this object implies that there is no limit for
|
|
the number of concurrent active requests in effect.
|
|
|
|
The limit applies only to new requests being activated.
|
|
When a new value is set, the agent will continue processing
|
|
all the requests already active, even if their number
|
|
exceeds the limit just imposed."
|
|
DEFVAL { 10 }
|
|
::= { traceRouteObjects 1 }
|
|
|
|
-- Traceroute Control Table
|
|
|
|
traceRouteCtlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TraceRouteCtlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Remote Operations Traceroute Control Table for
|
|
providing the capability of invoking traceroute from a remote
|
|
host. The results of traceroute operations can be stored in
|
|
the traceRouteResultsTable, traceRouteProbeHistoryTable, and
|
|
the traceRouteHopsTable."
|
|
::= { traceRouteObjects 2 }
|
|
|
|
traceRouteCtlEntry OBJECT-TYPE
|
|
SYNTAX TraceRouteCtlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the traceRouteCtlTable. The first
|
|
index element, traceRouteCtlOwnerIndex, is of type
|
|
SnmpAdminString, a textual convention that allows for
|
|
use of the SNMPv3 View-Based Access Control Model
|
|
(RFC 3415, VACM) and that allows a management
|
|
application to identify its entries. The second index,
|
|
traceRouteCtlTestName (also an SnmpAdminString),
|
|
enables the same management application to have
|
|
multiple requests outstanding."
|
|
INDEX {
|
|
traceRouteCtlOwnerIndex,
|
|
traceRouteCtlTestName
|
|
}
|
|
::= { traceRouteCtlTable 1 }
|
|
|
|
TraceRouteCtlEntry ::=
|
|
SEQUENCE {
|
|
traceRouteCtlOwnerIndex SnmpAdminString,
|
|
traceRouteCtlTestName SnmpAdminString,
|
|
traceRouteCtlTargetAddressType InetAddressType,
|
|
traceRouteCtlTargetAddress InetAddress,
|
|
traceRouteCtlByPassRouteTable TruthValue,
|
|
traceRouteCtlDataSize Unsigned32,
|
|
traceRouteCtlTimeOut Unsigned32,
|
|
traceRouteCtlProbesPerHop Unsigned32,
|
|
traceRouteCtlPort Unsigned32,
|
|
traceRouteCtlMaxTtl Unsigned32,
|
|
traceRouteCtlDSField Unsigned32,
|
|
traceRouteCtlSourceAddressType InetAddressType,
|
|
traceRouteCtlSourceAddress InetAddress,
|
|
traceRouteCtlIfIndex InterfaceIndexOrZero,
|
|
traceRouteCtlMiscOptions SnmpAdminString,
|
|
traceRouteCtlMaxFailures Unsigned32,
|
|
traceRouteCtlDontFragment TruthValue,
|
|
traceRouteCtlInitialTtl Unsigned32,
|
|
traceRouteCtlFrequency Unsigned32,
|
|
traceRouteCtlStorageType StorageType,
|
|
traceRouteCtlAdminStatus INTEGER,
|
|
traceRouteCtlDescr SnmpAdminString,
|
|
traceRouteCtlMaxRows Unsigned32,
|
|
traceRouteCtlTrapGeneration BITS,
|
|
traceRouteCtlCreateHopsEntries TruthValue,
|
|
traceRouteCtlType OBJECT IDENTIFIER,
|
|
traceRouteCtlRowStatus RowStatus
|
|
}
|
|
|
|
traceRouteCtlOwnerIndex OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To facilitate the provisioning of access control by a
|
|
security administrator using the View-Based Access
|
|
Control Model (RFC 3415, VACM) for tables in which
|
|
multiple users may need to create or
|
|
modify entries independently, the initial index is used as
|
|
an 'owner index'. Such an initial index has a syntax of
|
|
SnmpAdminString and can thus be trivially mapped to a
|
|
securityName or groupName defined in VACM, in
|
|
accordance with a security policy.
|
|
|
|
When used in conjunction with such a security policy,
|
|
all entries in the table belonging to a particular user
|
|
(or group) will have the same value for this initial
|
|
index. For a given user's entries in a particular
|
|
table, the object identifiers for the information in
|
|
these entries will have the same subidentifiers (except
|
|
for the 'column' subidentifier) up to the end of the
|
|
encoded owner index. To configure VACM to permit access
|
|
to this portion of the table, one would create
|
|
vacmViewTreeFamilyTable entries with the value of
|
|
vacmViewTreeFamilySubtree including the owner index
|
|
portion, and vacmViewTreeFamilyMask 'wildcarding' the
|
|
column subidentifier. More elaborate configurations
|
|
are possible."
|
|
::= { traceRouteCtlEntry 1 }
|
|
|
|
traceRouteCtlTestName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a traceroute test. This is locally unique,
|
|
within the scope of a traceRouteCtlOwnerIndex."
|
|
::= { traceRouteCtlEntry 2 }
|
|
|
|
traceRouteCtlTargetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of host address to be used on the
|
|
traceroute request at the remote host."
|
|
DEFVAL { unknown }
|
|
::= { traceRouteCtlEntry 3 }
|
|
|
|
traceRouteCtlTargetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the host address used on the
|
|
traceroute request at the remote host. The
|
|
host address type can be determined by
|
|
examining the value of the corresponding
|
|
traceRouteCtlTargetAddressType.
|
|
|
|
A value for this object MUST be set prior to
|
|
transitioning its corresponding traceRouteCtlEntry to
|
|
active(1) via traceRouteCtlRowStatus."
|
|
::= { traceRouteCtlEntry 4 }
|
|
|
|
traceRouteCtlByPassRouteTable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The purpose of this object is to enable optional
|
|
bypassing the route table. If enabled, the remote
|
|
host will bypass the normal routing tables and send
|
|
directly to a host on an attached network. If the
|
|
host is not on a directly attached network, an
|
|
error is returned. This option can be used to perform
|
|
the traceroute operation to a local host through an
|
|
interface that has no route defined (e.g., after the
|
|
interface was dropped by the routing daemon at the host)."
|
|
DEFVAL { false }
|
|
::= { traceRouteCtlEntry 5 }
|
|
|
|
traceRouteCtlDataSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65507)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the size of the data portion of a traceroute
|
|
request, in octets. If the RECOMMENDED traceroute method
|
|
(UDP datagrams as probes) is used, then the value
|
|
contained in this object MUST be applied. If another
|
|
traceroute method is used for which the specified size
|
|
is not appropriate, then the implementation SHOULD use
|
|
whatever size (appropriate to the method) is closest to
|
|
the specified size.
|
|
|
|
The maximum value for this object was computed by
|
|
subtracting the smallest possible IP header size of
|
|
20 octets (IPv4 header with no options) and the UDP
|
|
header size of 8 octets from the maximum IP packet size.
|
|
An IP packet has a maximum size of 65535 octets
|
|
(excluding IPv6 Jumbograms)."
|
|
DEFVAL { 0 }
|
|
::= { traceRouteCtlEntry 6 }
|
|
|
|
traceRouteCtlTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..60)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the time-out value, in seconds, for
|
|
a traceroute request."
|
|
DEFVAL { 3 }
|
|
::= { traceRouteCtlEntry 7 }
|
|
|
|
traceRouteCtlProbesPerHop OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..10)
|
|
UNITS "probes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of times to reissue a traceroute
|
|
request with the same time-to-live (TTL) value."
|
|
DEFVAL { 3 }
|
|
::= { traceRouteCtlEntry 8 }
|
|
|
|
traceRouteCtlPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "UDP Port"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the (initial) UDP port to send the traceroute
|
|
request to. A port needs to be specified that is not in
|
|
use at the destination (target) host. The default
|
|
value for this object is the IANA assigned port,
|
|
33434, for the traceroute function."
|
|
DEFVAL { 33434 }
|
|
::= { traceRouteCtlEntry 9 }
|
|
|
|
traceRouteCtlMaxTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
UNITS "time-to-live value"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum time-to-live value."
|
|
DEFVAL { 30 }
|
|
::= { traceRouteCtlEntry 10 }
|
|
|
|
traceRouteCtlDSField OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the value to store in the Type of Service
|
|
(TOS) octet in the IPv4 header or in the Traffic
|
|
Class octet in the IPv6 header, respectively, of the
|
|
IP packet used to encapsulate the traceroute probe.
|
|
|
|
The octet to be set in the IP header contains the
|
|
Differentiated Services (DS) Field in the six most
|
|
significant bits.
|
|
|
|
This option can be used to determine what effect an
|
|
explicit DS Field setting has on a traceroute response.
|
|
Not all values are legal or meaningful. A value of 0
|
|
means that the function represented by this option is
|
|
not supported. DS Field usage is often not supported
|
|
by IP implementations, and not all values are supported.
|
|
Refer to RFC 2474 and RFC 3260 for guidance on usage of
|
|
this field."
|
|
REFERENCE
|
|
"Refer to RFC 1812 for the definition of the IPv4 TOS
|
|
octet and to RFC 2460 for the definition of the IPv6
|
|
Traffic Class octet. Refer to RFC 2474 and RFC 3260
|
|
for the definition of the Differentiated Services Field."
|
|
DEFVAL { 0 }
|
|
::= { traceRouteCtlEntry 11 }
|
|
|
|
traceRouteCtlSourceAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of the source address,
|
|
traceRouteCtlSourceAddress, to be used at a remote host
|
|
when a traceroute operation is performed."
|
|
DEFVAL { unknown }
|
|
::= { traceRouteCtlEntry 12 }
|
|
|
|
traceRouteCtlSourceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use the specified IP address (which must be given as an
|
|
IP number, not a hostname) as the source address in
|
|
outgoing probe packets. On hosts with more than one IP
|
|
address, this option can be used to select the address
|
|
to be used. If the IP address is not one of this
|
|
machine's interface addresses, an error is returned, and
|
|
nothing is sent. A zero-length octet string value for
|
|
this object disables source address specification.
|
|
The address type (InetAddressType) that relates to
|
|
this object is specified by the corresponding value
|
|
of traceRouteCtlSourceAddressType."
|
|
DEFVAL { ''H }
|
|
::= { traceRouteCtlEntry 13 }
|
|
|
|
traceRouteCtlIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to an interface's ifIndex prior
|
|
to starting a remote traceroute operation directs
|
|
the traceroute probes to be transmitted over the
|
|
specified interface. A value of zero for this object
|
|
implies that this option is not enabled."
|
|
DEFVAL { 0 }
|
|
::= { traceRouteCtlEntry 14 }
|
|
|
|
traceRouteCtlMiscOptions OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables an application to specify implementation-dependent
|
|
options."
|
|
DEFVAL { ''H }
|
|
::= { traceRouteCtlEntry 15 }
|
|
|
|
traceRouteCtlMaxFailures OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
UNITS "timeouts"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the maximum number
|
|
of consecutive timeouts allowed before a remote traceroute
|
|
request is terminated. A value of either 255 (maximum
|
|
hop count/possible TTL value) or 0 indicates that the
|
|
function of terminating a remote traceroute request when a
|
|
specific number of consecutive timeouts are detected is
|
|
disabled."
|
|
DEFVAL { 5 }
|
|
::= { traceRouteCtlEntry 16 }
|
|
|
|
traceRouteCtlDontFragment OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables setting of the don't fragment flag (DF)
|
|
in the IP header for a probe. Use of this object enables
|
|
a manual PATH MTU test is performed."
|
|
DEFVAL { false }
|
|
::= { traceRouteCtlEntry 17 }
|
|
|
|
traceRouteCtlInitialTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object specifies the initial TTL value to
|
|
use. This enables bypassing the initial (often well known)
|
|
portion of a path."
|
|
DEFVAL { 1 }
|
|
::= { traceRouteCtlEntry 18 }
|
|
|
|
traceRouteCtlFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds to wait before repeating a
|
|
traceroute test, as defined by the value of the
|
|
various objects in the corresponding row.
|
|
|
|
After a single test is completed the number of seconds
|
|
as defined by the value of traceRouteCtlFrequency MUST
|
|
elapse before the next traceroute test is started.
|
|
|
|
A value of 0 for this object implies that the test
|
|
as defined by the corresponding entry will not be
|
|
|
|
repeated."
|
|
DEFVAL { 0 }
|
|
::= { traceRouteCtlEntry 19 }
|
|
|
|
traceRouteCtlStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent' need not
|
|
allow write-access to any columnar objects in the row."
|
|
DEFVAL { nonVolatile }
|
|
::= { traceRouteCtlEntry 20 }
|
|
|
|
traceRouteCtlAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
|
|
enabled(1), -- operation should be started
|
|
disabled(2) -- operation should be stopped
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reflects the desired state that an traceRouteCtlEntry
|
|
should be in:
|
|
|
|
enabled(1) - Attempt to activate the test as defined by
|
|
this traceRouteCtlEntry.
|
|
disabled(2) - Deactivate the test as defined by this
|
|
traceRouteCtlEntry.
|
|
|
|
Refer to the corresponding traceRouteResultsOperStatus to
|
|
determine the operational state of the test defined by
|
|
this entry."
|
|
DEFVAL { disabled }
|
|
::= { traceRouteCtlEntry 21 }
|
|
|
|
traceRouteCtlDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The purpose of this object is to provide a
|
|
descriptive name of the remote traceroute
|
|
test."
|
|
DEFVAL { ''H }
|
|
::= { traceRouteCtlEntry 22 }
|
|
|
|
traceRouteCtlMaxRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "rows"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of corresponding entries allowed
|
|
in the traceRouteProbeHistoryTable. An implementation
|
|
of this MIB will remove the oldest corresponding entry
|
|
in the traceRouteProbeHistoryTable to allow the
|
|
addition of an new entry once the number of
|
|
corresponding rows in the traceRouteProbeHistoryTable
|
|
reaches this value.
|
|
|
|
Old entries are not removed when a new test is
|
|
started. Entries are added to the
|
|
traceRouteProbeHistoryTable until traceRouteCtlMaxRows
|
|
is reached before entries begin to be removed.
|
|
A value of 0 for this object disables creation of
|
|
traceRouteProbeHistoryTable entries."
|
|
DEFVAL { 50 }
|
|
::= { traceRouteCtlEntry 23 }
|
|
|
|
traceRouteCtlTrapGeneration OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
pathChange(0),
|
|
testFailure(1),
|
|
testCompletion(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object determines when and whether to
|
|
generate a notification for this entry:
|
|
|
|
pathChange(0) - Generate a traceRoutePathChange
|
|
notification when the current path varies from a
|
|
previously determined path.
|
|
testFailure(1) - Generate a traceRouteTestFailed
|
|
notification when the full path to a target
|
|
can't be determined.
|
|
testCompletion(2) - Generate a traceRouteTestCompleted
|
|
notification when the path to a target has been
|
|
determined.
|
|
|
|
The value of this object defaults to an empty set,
|
|
indicating that none of the above options has been
|
|
selected."
|
|
DEFVAL { { } }
|
|
::= { traceRouteCtlEntry 24 }
|
|
|
|
traceRouteCtlCreateHopsEntries OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current path for a traceroute test is kept in the
|
|
traceRouteHopsTable on a per-hop basis when the value of
|
|
this object is true(1)."
|
|
DEFVAL { false }
|
|
::= { traceRouteCtlEntry 25 }
|
|
|
|
traceRouteCtlType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is used either to report or to
|
|
select the implementation method to be used for
|
|
performing a traceroute operation. The value of this
|
|
object may be selected from
|
|
traceRouteImplementationTypeDomains.
|
|
|
|
Additional implementation types should be allocated as
|
|
required by implementers of the DISMAN-TRACEROUTE-MIB
|
|
under their enterprise specific registration point,
|
|
not beneath traceRouteImplementationTypeDomains."
|
|
DEFVAL { traceRouteUsingUdpProbes }
|
|
::= { traceRouteCtlEntry 26 }
|
|
|
|
traceRouteCtlRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows entries to be created and deleted
|
|
in the traceRouteCtlTable. Deletion of an entry in
|
|
this table results in a deletion of all corresponding (same
|
|
traceRouteCtlOwnerIndex and traceRouteCtlTestName
|
|
index values) traceRouteResultsTable,
|
|
traceRouteProbeHistoryTable, and traceRouteHopsTable
|
|
entries.
|
|
|
|
A value MUST be specified for traceRouteCtlTargetAddress
|
|
prior to acceptance of a transition to active(1) state.
|
|
|
|
When a value for pingCtlTargetAddress is set,
|
|
the value of object pingCtlRowStatus changes
|
|
from notReady(3) to notInService(2).
|
|
|
|
Activation of a remote traceroute operation is
|
|
controlled via traceRouteCtlAdminStatus, and not
|
|
by transitioning of this object's value to active(1).
|
|
|
|
Transitions in and out of active(1) state are not
|
|
allowed while an entry's traceRouteResultsOperStatus
|
|
is active(1), with the exception that deletion of
|
|
an entry in this table by setting its RowStatus
|
|
object to destroy(6) will stop an active
|
|
traceroute operation.
|
|
|
|
The operational state of an traceroute operation
|
|
can be determined by examination of the corresponding
|
|
traceRouteResultsOperStatus object."
|
|
REFERENCE
|
|
"See definition of RowStatus in RFC 2579, 'Textual
|
|
Conventions for SMIv2.'"
|
|
::= { traceRouteCtlEntry 27 }
|
|
|
|
-- Traceroute Results Table
|
|
|
|
traceRouteResultsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TraceRouteResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Remote Operations Traceroute Results Table for
|
|
keeping track of the status of a traceRouteCtlEntry.
|
|
|
|
An entry is added to the traceRouteResultsTable when an
|
|
traceRouteCtlEntry is started by successful transition
|
|
of its traceRouteCtlAdminStatus object to enabled(1).
|
|
|
|
If the object traceRouteCtlAdminStatus already has the value
|
|
enabled(1), and if the corresponding
|
|
traceRouteResultsOperStatus object has the value
|
|
completed(3), then successfully writing enabled(1) to the
|
|
object traceRouteCtlAdminStatus re-initializes the already
|
|
existing entry in the traceRouteResultsTable. The values of
|
|
objects in the re-initialized entry are the same as
|
|
the values of objects in a new entry would be.
|
|
|
|
An entry is removed from the traceRouteResultsTable when
|
|
|
|
its corresponding traceRouteCtlEntry is deleted."
|
|
::= { traceRouteObjects 3 }
|
|
|
|
traceRouteResultsEntry OBJECT-TYPE
|
|
SYNTAX TraceRouteResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the traceRouteResultsTable. The
|
|
traceRouteResultsTable has the same indexing as the
|
|
traceRouteCtlTable so that a traceRouteResultsEntry
|
|
corresponds to the traceRouteCtlEntry that caused it to
|
|
be created."
|
|
INDEX {
|
|
traceRouteCtlOwnerIndex,
|
|
traceRouteCtlTestName
|
|
}
|
|
::= { traceRouteResultsTable 1 }
|
|
|
|
TraceRouteResultsEntry ::=
|
|
SEQUENCE {
|
|
traceRouteResultsOperStatus INTEGER,
|
|
traceRouteResultsCurHopCount Gauge32,
|
|
traceRouteResultsCurProbeCount Gauge32,
|
|
traceRouteResultsIpTgtAddrType InetAddressType,
|
|
traceRouteResultsIpTgtAddr InetAddress,
|
|
traceRouteResultsTestAttempts Gauge32,
|
|
traceRouteResultsTestSuccesses Gauge32,
|
|
traceRouteResultsLastGoodPath DateAndTime
|
|
}
|
|
|
|
traceRouteResultsOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1), -- test is in progress
|
|
disabled(2), -- test has stopped
|
|
completed(3) -- test is completed
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reflects the operational state of an traceRouteCtlEntry:
|
|
|
|
enabled(1) - Test is active.
|
|
disabled(2) - Test has stopped.
|
|
completed(3) - Test is completed."
|
|
::= { traceRouteResultsEntry 1 }
|
|
|
|
traceRouteResultsCurHopCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "hops"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reflects the current TTL value (from 1 to
|
|
255) for a remote traceroute operation.
|
|
Maximum TTL value is determined by
|
|
traceRouteCtlMaxTtl."
|
|
::= { traceRouteResultsEntry 2 }
|
|
|
|
traceRouteResultsCurProbeCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "probes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reflects the current probe count (1..10) for
|
|
a remote traceroute operation. The maximum
|
|
probe count is determined by
|
|
traceRouteCtlProbesPerHop."
|
|
::= { traceRouteResultsEntry 3 }
|
|
|
|
traceRouteResultsIpTgtAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of address stored
|
|
in the corresponding traceRouteResultsIpTgtAddr
|
|
object."
|
|
::= { traceRouteResultsEntry 4 }
|
|
|
|
traceRouteResultsIpTgtAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object reports the IP address associated
|
|
with a traceRouteCtlTargetAddress value when the
|
|
destination address is specified as a DNS name.
|
|
The value of this object should be a zero-length
|
|
octet string when a DNS name is not specified or
|
|
when a specified DNS name fails to resolve."
|
|
::= { traceRouteResultsEntry 5 }
|
|
|
|
traceRouteResultsTestAttempts OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "tests"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of attempts to determine a path
|
|
to a target. The value of this object MUST be started
|
|
at 0."
|
|
::= { traceRouteResultsEntry 6 }
|
|
|
|
traceRouteResultsTestSuccesses OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "tests"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of attempts to determine a path
|
|
to a target that have succeeded. The value of this
|
|
object MUST be reported as 0 when no attempts have
|
|
succeeded."
|
|
::= { traceRouteResultsEntry 7 }
|
|
|
|
traceRouteResultsLastGoodPath OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when the last complete path
|
|
was determined. A path is complete if responses
|
|
were received or timeout occurred for each hop on
|
|
the path; i.e., for each TTL value from the value
|
|
of the corresponding traceRouteCtlInitialTtl object
|
|
up to the end of the path or (if no reply from the
|
|
target IP address was received) up to the value of
|
|
the corresponding traceRouteCtlMaxTtl object."
|
|
::= { traceRouteResultsEntry 8 }
|
|
|
|
-- Trace Route Probe History Table
|
|
|
|
traceRouteProbeHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TraceRouteProbeHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Remote Operations Traceroute Results Table
|
|
for storing the results of a traceroute operation.
|
|
|
|
An implementation of this MIB will remove the oldest
|
|
|
|
entry in the traceRouteProbeHistoryTable of the
|
|
corresponding entry in the traceRouteCtlTable to allow
|
|
the addition of a new entry once the number of rows in
|
|
the traceRouteProbeHistoryTable reaches the value specified
|
|
by traceRouteCtlMaxRows for the corresponding entry in the
|
|
traceRouteCtlTable."
|
|
::= { traceRouteObjects 4 }
|
|
|
|
traceRouteProbeHistoryEntry OBJECT-TYPE
|
|
SYNTAX TraceRouteProbeHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a table for storing the results of a traceroute
|
|
operation. Entries in this table are limited by
|
|
the value of the corresponding traceRouteCtlMaxRows
|
|
object.
|
|
|
|
The first two index elements identify the
|
|
traceRouteCtlEntry that a traceRouteProbeHistoryEntry
|
|
belongs to. The third index element selects a single
|
|
traceroute operation result. The fourth and fifth indexes
|
|
select the hop and the probe for a particular
|
|
traceroute operation."
|
|
INDEX {
|
|
traceRouteCtlOwnerIndex,
|
|
traceRouteCtlTestName,
|
|
traceRouteProbeHistoryIndex,
|
|
traceRouteProbeHistoryHopIndex,
|
|
traceRouteProbeHistoryProbeIndex
|
|
|
|
}
|
|
::= { traceRouteProbeHistoryTable 1 }
|
|
|
|
TraceRouteProbeHistoryEntry ::=
|
|
SEQUENCE {
|
|
traceRouteProbeHistoryIndex Unsigned32,
|
|
traceRouteProbeHistoryHopIndex Unsigned32,
|
|
traceRouteProbeHistoryProbeIndex Unsigned32,
|
|
traceRouteProbeHistoryHAddrType InetAddressType,
|
|
traceRouteProbeHistoryHAddr InetAddress,
|
|
traceRouteProbeHistoryResponse Unsigned32,
|
|
traceRouteProbeHistoryStatus OperationResponseStatus,
|
|
traceRouteProbeHistoryLastRC Integer32,
|
|
traceRouteProbeHistoryTime DateAndTime
|
|
}
|
|
|
|
traceRouteProbeHistoryIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..'ffffffff'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created when the result of
|
|
a traceroute probe is determined. The initial 2 instance
|
|
identifier index values identify the traceRouteCtlEntry
|
|
that a probe result (traceRouteProbeHistoryEntry) belongs
|
|
to. An entry is removed from this table when
|
|
its corresponding traceRouteCtlEntry is deleted.
|
|
|
|
An implementation MUST start assigning
|
|
traceRouteProbeHistoryIndex values at 1 and wrap after
|
|
exceeding the maximum possible value, as defined by the
|
|
limit of this object ('ffffffff'h)."
|
|
::= { traceRouteProbeHistoryEntry 1 }
|
|
|
|
traceRouteProbeHistoryHopIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which hop in a traceroute path the probe's
|
|
results are for. The value of this object is initially
|
|
determined by the value of traceRouteCtlInitialTtl."
|
|
::= { traceRouteProbeHistoryEntry 2 }
|
|
|
|
traceRouteProbeHistoryProbeIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the index of a probe for a particular
|
|
hop in a traceroute path. The number of probes per
|
|
hop is determined by the value of the corresponding
|
|
traceRouteCtlProbesPerHop object."
|
|
::= { traceRouteProbeHistoryEntry 3 }
|
|
|
|
traceRouteProbeHistoryHAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects indicates the type of address stored
|
|
in the corresponding traceRouteProbeHistoryHAddr
|
|
object."
|
|
::= { traceRouteProbeHistoryEntry 4 }
|
|
|
|
traceRouteProbeHistoryHAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of a hop in a traceroute path. This object
|
|
is not allowed to be a DNS name. The value of the
|
|
corresponding object, traceRouteProbeHistoryHAddrType,
|
|
indicates this object's IP address type."
|
|
::= { traceRouteProbeHistoryEntry 5 }
|
|
|
|
traceRouteProbeHistoryResponse OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time measured in milliseconds from when
|
|
a probe was sent to when its response was received or
|
|
when it timed out. The value of this object is reported
|
|
as 0 when it is not possible to transmit a probe."
|
|
::= { traceRouteProbeHistoryEntry 6 }
|
|
|
|
traceRouteProbeHistoryStatus OBJECT-TYPE
|
|
SYNTAX OperationResponseStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of a traceroute operation made by a remote
|
|
host for a particular probe."
|
|
::= { traceRouteProbeHistoryEntry 7 }
|
|
|
|
traceRouteProbeHistoryLastRC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last implementation-method-specific reply code received.
|
|
|
|
Traceroute is usually implemented by transmitting a series of
|
|
probe packets with increasing time-to-live values. A probe
|
|
packet is a UDP datagram encapsulated into an IP packet.
|
|
Each hop in a path to the target (destination) host rejects
|
|
the probe packets (probe's TTL too small, ICMP reply) until
|
|
either the maximum TTL is exceeded or the target host is
|
|
received."
|
|
::= { traceRouteProbeHistoryEntry 8 }
|
|
|
|
traceRouteProbeHistoryTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timestamp for when this probe's results were determined."
|
|
::= { traceRouteProbeHistoryEntry 9 }
|
|
|
|
-- Traceroute Hop Results Table
|
|
|
|
traceRouteHopsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TraceRouteHopsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Remote Operations Traceroute Hop Table for
|
|
keeping track of the results of traceroute tests on a
|
|
per-hop basis."
|
|
::= { traceRouteObjects 5 }
|
|
|
|
traceRouteHopsEntry OBJECT-TYPE
|
|
SYNTAX TraceRouteHopsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the traceRouteHopsTable.
|
|
The first two index elements identify the
|
|
traceRouteCtlEntry that a traceRouteHopsEntry
|
|
belongs to. The third index element,
|
|
traceRouteHopsHopIndex, selects a
|
|
hop in a traceroute path."
|
|
INDEX {
|
|
traceRouteCtlOwnerIndex,
|
|
traceRouteCtlTestName,
|
|
traceRouteHopsHopIndex
|
|
}
|
|
::= { traceRouteHopsTable 1 }
|
|
|
|
TraceRouteHopsEntry ::=
|
|
SEQUENCE {
|
|
traceRouteHopsHopIndex Unsigned32,
|
|
traceRouteHopsIpTgtAddressType InetAddressType,
|
|
traceRouteHopsIpTgtAddress InetAddress,
|
|
traceRouteHopsMinRtt Unsigned32,
|
|
traceRouteHopsMaxRtt Unsigned32,
|
|
traceRouteHopsAverageRtt Unsigned32,
|
|
traceRouteHopsRttSumOfSquares Unsigned32,
|
|
traceRouteHopsSentProbes Unsigned32,
|
|
traceRouteHopsProbeResponses Unsigned32,
|
|
traceRouteHopsLastGoodProbe DateAndTime
|
|
}
|
|
|
|
traceRouteHopsHopIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..'ffffffff'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the hop index for a traceroute hop. Values
|
|
for this object with respect to the same
|
|
traceRouteCtlOwnerIndex and traceRouteCtlTestName
|
|
MUST start at 1 and be given increasing values for
|
|
subsequent hops. The value of traceRouteHopsHopIndex is not
|
|
necessarily the number of the hop on the traced path.
|
|
|
|
The traceRouteHopsTable keeps the current traceroute
|
|
path per traceRouteCtlEntry if enabled by
|
|
setting the corresponding traceRouteCtlCreateHopsEntries
|
|
to true(1).
|
|
|
|
All hops (traceRouteHopsTable entries) in a traceroute
|
|
path MUST be updated at the same time when a traceroute
|
|
operation is completed. Care needs to be applied when a path
|
|
either changes or can't be determined. The initial portion
|
|
of the path, up to the first hop change, MUST retain the
|
|
same traceRouteHopsHopIndex values. The remaining portion
|
|
of the path SHOULD be assigned new traceRouteHopsHopIndex
|
|
values."
|
|
::= { traceRouteHopsEntry 1 }
|
|
|
|
traceRouteHopsIpTgtAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of address stored
|
|
in the corresponding traceRouteHopsIpTgtAddress
|
|
object."
|
|
::= { traceRouteHopsEntry 2 }
|
|
|
|
traceRouteHopsIpTgtAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object reports the IP address associated with
|
|
|
|
the hop. A value for this object should be reported
|
|
as a numeric IP address, not as a DNS name.
|
|
|
|
The address type (InetAddressType) that relates to
|
|
this object is specified by the corresponding value
|
|
of pingCtlSourceAddressType."
|
|
::= { traceRouteHopsEntry 3 }
|
|
|
|
traceRouteHopsMinRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum traceroute round-trip-time (RTT) received for
|
|
this hop. A value of 0 for this object implies that no
|
|
RTT has been received."
|
|
::= { traceRouteHopsEntry 4 }
|
|
|
|
traceRouteHopsMaxRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum traceroute round-trip-time (RTT) received for
|
|
this hop. A value of 0 for this object implies that no
|
|
RTT has been received."
|
|
::= { traceRouteHopsEntry 5 }
|
|
|
|
traceRouteHopsAverageRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current average traceroute round-trip-time (RTT) for
|
|
this hop."
|
|
::= { traceRouteHopsEntry 6 }
|
|
|
|
traceRouteHopsRttSumOfSquares OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the sum of the squares of all
|
|
round-trip-times received for this hop. Its purpose is
|
|
to enable standard deviation calculation."
|
|
::= { traceRouteHopsEntry 7 }
|
|
|
|
traceRouteHopsSentProbes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object reflects the number of probes sent
|
|
for this hop during this traceroute test. The value of this
|
|
object should start at 0."
|
|
::= { traceRouteHopsEntry 8 }
|
|
|
|
traceRouteHopsProbeResponses OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of responses received for this hop during this
|
|
traceroute test. This value of this object should start
|
|
at 0."
|
|
::= { traceRouteHopsEntry 9 }
|
|
|
|
traceRouteHopsLastGoodProbe OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Date and time at which the last response was received for a
|
|
probe for this hop during this traceroute test."
|
|
::= { traceRouteHopsEntry 10 }
|
|
|
|
-- Notification Definition section
|
|
|
|
traceRoutePathChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
traceRouteCtlTargetAddressType,
|
|
traceRouteCtlTargetAddress,
|
|
traceRouteResultsIpTgtAddrType,
|
|
traceRouteResultsIpTgtAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path to a target has changed."
|
|
::= { traceRouteNotifications 1 }
|
|
|
|
traceRouteTestFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
traceRouteCtlTargetAddressType,
|
|
traceRouteCtlTargetAddress,
|
|
traceRouteResultsIpTgtAddrType,
|
|
traceRouteResultsIpTgtAddr
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Could not determine the path to a target."
|
|
::= { traceRouteNotifications 2 }
|
|
|
|
traceRouteTestCompleted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
traceRouteCtlTargetAddressType,
|
|
traceRouteCtlTargetAddress,
|
|
traceRouteResultsIpTgtAddrType,
|
|
traceRouteResultsIpTgtAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path to a target has just been determined."
|
|
::= { traceRouteNotifications 3 }
|
|
|
|
-- Conformance information
|
|
-- Compliance statements
|
|
|
|
traceRouteCompliances OBJECT IDENTIFIER
|
|
::= { traceRouteConformance 1 }
|
|
traceRouteGroups OBJECT IDENTIFIER
|
|
::= { traceRouteConformance 2 }
|
|
|
|
-- Compliance statements
|
|
|
|
traceRouteFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities that
|
|
fully implement the DISMAN-TRACEROUTE-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
traceRouteMinimumGroup,
|
|
traceRouteCtlRowStatusGroup,
|
|
traceRouteHistoryGroup
|
|
}
|
|
|
|
GROUP traceRouteHopsTableGroup
|
|
DESCRIPTION
|
|
"This group lists the objects that make up a
|
|
traceRouteHopsEntry. Support of the traceRouteHopsTable
|
|
is optional."
|
|
|
|
GROUP traceRouteNotificationsGroup
|
|
DESCRIPTION
|
|
"This group defines a collection of optional
|
|
notifications."
|
|
|
|
OBJECT traceRouteMaxConcurrentRequests
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support SET
|
|
operations to this object."
|
|
|
|
OBJECT traceRouteCtlByPassRouteTable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access to this object is not required by
|
|
implementations that are not capable of its
|
|
implementation. The function represented by this
|
|
object is implementable if the setsockopt
|
|
SOL_SOCKET SO_DONTROUTE option is supported."
|
|
|
|
OBJECT traceRouteCtlDSField
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If write access is
|
|
not supported, return a 0 as the value of this object.
|
|
A value of 0 implies that the function represented by
|
|
this option is not supported."
|
|
|
|
OBJECT traceRouteCtlSourceAddressType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access to this object is not required by
|
|
implementations that are not capable of binding the
|
|
send socket with a source address. An implementation
|
|
is only required to support IPv4 and IPv6 addresses."
|
|
|
|
OBJECT traceRouteCtlSourceAddress
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access to this object is not required by
|
|
implementations that are not capable of binding the
|
|
send socket with a source address. An implementation
|
|
is only required to support IPv4 and IPv6 addresses."
|
|
|
|
OBJECT traceRouteCtlIfIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If write access is
|
|
|
|
not supported, return a 0 as the value of this object.
|
|
A value of 0 implies that the function represented by
|
|
this option is not supported."
|
|
|
|
OBJECT traceRouteCtlMiscOptions
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Support of this object is optional. If not
|
|
supporting, do not allow write access and return a
|
|
zero-length octet string as the value of the object."
|
|
|
|
OBJECT traceRouteCtlStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. It is also allowed
|
|
that implementations support only the volatile(2)
|
|
StorageType enumeration."
|
|
|
|
OBJECT traceRouteCtlType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. In addition, the only
|
|
value that is RECOMMENDED to be supported by an
|
|
implementation is traceRouteUsingUdpProbes."
|
|
|
|
OBJECT traceRouteResultsIpTgtAddrType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteResultsIpTgtAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteResultsLastGoodPath
|
|
DESCRIPTION
|
|
"If the traceRouteHopsTableGroup is implemented, then
|
|
this object is mandatory for implementations that have
|
|
access to a system clock and that are capable of setting
|
|
the values for DateAndTime objects. It is RECOMMENDED
|
|
that when this object is not supported its values
|
|
be reported as '0000000000000000'H."
|
|
|
|
OBJECT traceRouteProbeHistoryHAddrType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteProbeHistoryHAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteProbeHistoryTime
|
|
DESCRIPTION
|
|
"This object is mandatory for implementations that have
|
|
access to a system clock and that are capable of setting
|
|
the values for DateAndTime objects. It is RECOMMENDED
|
|
that when this object is not supported its values
|
|
be reported as '0000000000000000'H."
|
|
|
|
OBJECT traceRouteHopsIpTgtAddressType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteHopsIpTgtAddress
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteHopsLastGoodProbe
|
|
DESCRIPTION
|
|
"This object is mandatory for implementations that have
|
|
access to a system clock and that are capable of setting
|
|
the values for DateAndTime objects. It is RECOMMENDED
|
|
that when this object is not supported its values
|
|
be reported as '0000000000000000'H."
|
|
::= { traceRouteCompliances 2 }
|
|
|
|
traceRouteMinimumCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum compliance statement for SNMP entities
|
|
which implement the minimal subset of the
|
|
DISMAN-TRACEROUTE-MIB. Implementors might choose this
|
|
subset for small devices with limited resources."
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS { traceRouteMinimumGroup }
|
|
|
|
GROUP traceRouteCtlRowStatusGroup
|
|
DESCRIPTION
|
|
"A compliant implementation does not have to implement
|
|
the traceRouteCtlRowStatusGroup."
|
|
|
|
GROUP traceRouteHistoryGroup
|
|
DESCRIPTION
|
|
"A compliant implementation does not have to implement
|
|
the traceRouteHistoryGroup."
|
|
|
|
GROUP traceRouteHopsTableGroup
|
|
DESCRIPTION
|
|
"This group lists the objects that make up a
|
|
traceRouteHopsEntry. Support of the traceRouteHopsTable
|
|
is optional."
|
|
|
|
GROUP traceRouteNotificationsGroup
|
|
DESCRIPTION
|
|
"This group defines a collection of optional
|
|
notifications."
|
|
|
|
OBJECT traceRouteMaxConcurrentRequests
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support SET
|
|
operations to this object."
|
|
|
|
OBJECT traceRouteCtlByPassRouteTable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If write access is
|
|
not supported, return a false(2) as the value of this
|
|
object. A value of false(2) means that the function
|
|
represented by this option is not supported."
|
|
|
|
OBJECT traceRouteCtlDSField
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If write access is
|
|
not supported, return a 0 as the value of this object.
|
|
A value of 0 implies that the function represented by
|
|
this option is not supported."
|
|
|
|
OBJECT traceRouteCtlSourceAddressType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access to this object is not required by
|
|
implementations that are not capable of binding the
|
|
send socket with a source address. An implementation
|
|
is only required to support IPv4 and IPv6 addresses."
|
|
|
|
OBJECT traceRouteCtlSourceAddress
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access to this object is not required by
|
|
implementations that are not capable of binding the
|
|
send socket with a source address. An implementation
|
|
is only required to support IPv4 and IPv6 addresses."
|
|
|
|
OBJECT traceRouteCtlIfIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If write access is
|
|
not supported, return a 0 as the value of this object.
|
|
A value of 0 implies that the function represented by
|
|
this option is not supported."
|
|
|
|
OBJECT traceRouteCtlMiscOptions
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Support of this object is optional. If not
|
|
supporting, do not allow write access, and return a
|
|
zero-length octet string as the value of the object."
|
|
|
|
OBJECT traceRouteCtlDontFragment
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If write access is
|
|
not supported, return a false(2) as the value of this
|
|
object. A value of false(2) means that the function
|
|
represented by this option is not supported."
|
|
|
|
OBJECT traceRouteCtlInitialTtl
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If write access is
|
|
not supported, return a 1 as the value of this object."
|
|
|
|
OBJECT traceRouteCtlFrequency
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If write access is
|
|
not supported, return a 0 as the value of this object.
|
|
A value of 0 implies that the function represented by
|
|
this option is not supported."
|
|
|
|
OBJECT traceRouteCtlStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. It is also allowed
|
|
that implementations support only the volatile(2)
|
|
StorageType enumeration."
|
|
|
|
OBJECT traceRouteCtlDescr
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support set
|
|
operations to this object."
|
|
|
|
OBJECT traceRouteCtlMaxRows
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If the
|
|
traceRouteHistoryGroup is not implemented, then write
|
|
access to this object MUST be disabled, and the object
|
|
MUST return a value of 0 when retrieved."
|
|
|
|
OBJECT traceRouteCtlTrapGeneration
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If the
|
|
traceRouteNotificationsGroup is not implemented, then
|
|
write access to this object MUST be disabled, and the
|
|
object MUST return a value with no bit set when
|
|
retrieved. No bit set indicates that no notification
|
|
is generated."
|
|
|
|
OBJECT traceRouteCtlCreateHopsEntries
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. If the
|
|
traceRouteHopsTableGroup is not implemented, then
|
|
write access to this object MUST be disabled, and the
|
|
object MUST return a value of false(2) when retrieved."
|
|
|
|
OBJECT traceRouteCtlType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. In addition, the only
|
|
|
|
value that is RECOMMENDED to be supported by an
|
|
implementation is traceRouteUsingUdpProbes."
|
|
|
|
OBJECT traceRouteResultsIpTgtAddrType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteResultsIpTgtAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteResultsLastGoodPath
|
|
DESCRIPTION
|
|
"This object is mandatory for implementations that have
|
|
access to a system clock and that are capable of setting
|
|
the values for DateAndTime objects. It is RECOMMENDED
|
|
that when this object is not supported its values
|
|
be reported as '0000000000000000'H."
|
|
|
|
OBJECT traceRouteProbeHistoryHAddrType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteProbeHistoryHAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteProbeHistoryTime
|
|
DESCRIPTION
|
|
"If the traceRouteHistoryGroup is implemented, then
|
|
this object is mandatory for implementations that have
|
|
access to a system clock and that are capable of setting
|
|
the values for DateAndTime objects. It is RECOMMENDED
|
|
that when this object is not supported its values
|
|
be reported as '0000000000000000'H."
|
|
|
|
OBJECT traceRouteHopsIpTgtAddressType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteHopsIpTgtAddress
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteHopsLastGoodProbe
|
|
DESCRIPTION
|
|
"If the traceRouteHopsTableGroup is implemented, then
|
|
this object is mandatory for implementations that have
|
|
access to a system clock and that are capable of setting
|
|
the values for DateAndTime objects. It is RECOMMENDED
|
|
that when this object is not supported its values
|
|
be reported as '0000000000000000'H."
|
|
::= { traceRouteCompliances 3 }
|
|
|
|
traceRouteCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the DISMAN-TRACEROUTE-MIB.
|
|
This compliance statement has been deprecated because
|
|
the traceRouteGroup and the traceRouteTimeStampGroup
|
|
have been split and deprecated. The
|
|
traceRouteFullCompliance is semantically identical to the
|
|
deprecated traceRouteCompliance statement."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
traceRouteGroup
|
|
}
|
|
GROUP traceRouteTimeStampGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for implementations that have
|
|
access to a system clock and that are capable of setting
|
|
the values for DateAndTime objects."
|
|
|
|
GROUP traceRouteNotificationsGroup
|
|
DESCRIPTION
|
|
"This group defines a collection of optional
|
|
notifications."
|
|
|
|
GROUP traceRouteHopsTableGroup
|
|
DESCRIPTION
|
|
"This group lists the objects that make up a
|
|
traceRouteHopsEntry. Support of the traceRouteHopsTable
|
|
is optional."
|
|
|
|
OBJECT traceRouteMaxConcurrentRequests
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support SET
|
|
operations to this object."
|
|
|
|
OBJECT traceRouteCtlByPassRouteTable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is not required by implementations that
|
|
are not capable of its implementation. The function
|
|
represented by this object is implementable if the
|
|
setsockopt SOL_SOCKET SO_DONTROUTE option is
|
|
supported."
|
|
|
|
OBJECT traceRouteCtlSourceAddressType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is not required by implementations that
|
|
are not capable of binding the send socket with a
|
|
source address. An implementation is only required to
|
|
support IPv4 and IPv6 addresses."
|
|
|
|
OBJECT traceRouteCtlSourceAddress
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"This object is not required by implementations that
|
|
are not capable of binding the send socket with a
|
|
source address. An implementation is only required to
|
|
support IPv4 and globally unique IPv6 addresses."
|
|
|
|
OBJECT traceRouteCtlIfIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. When write access is
|
|
not supported, return a 0 as the value of this object.
|
|
A value of 0 implies that the function represented by
|
|
this option is not supported."
|
|
|
|
OBJECT traceRouteCtlMiscOptions
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Support of this object is optional. When not
|
|
supporting, do not allow write access, and return a
|
|
zero-length octet string as the value of the object."
|
|
|
|
OBJECT traceRouteCtlStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. It is also allowed
|
|
that implementations support only the volatile
|
|
StorageType enumeration."
|
|
|
|
OBJECT traceRouteCtlDSField
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. When write access is
|
|
not supported, return a 0 as the value of this object.
|
|
A value of 0 implies that the function represented by
|
|
this option is not supported."
|
|
|
|
OBJECT traceRouteCtlType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required. In addition, the only
|
|
value that is RECOMMENDED to be supported by an
|
|
implementation is traceRouteUsingUdpProbes."
|
|
|
|
OBJECT traceRouteResultsIpTgtAddrType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteResultsIpTgtAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteProbeHistoryHAddrType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteProbeHistoryHAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteHopsIpTgtAddressType
|
|
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
|
|
OBJECT traceRouteHopsIpTgtAddress
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"An implementation should only support IPv4 and
|
|
globally unique IPv6 address values for this object."
|
|
::= { traceRouteCompliances 1 }
|
|
|
|
-- MIB groupings
|
|
|
|
traceRouteMinimumGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
traceRouteMaxConcurrentRequests,
|
|
traceRouteCtlTargetAddressType,
|
|
traceRouteCtlTargetAddress,
|
|
traceRouteCtlByPassRouteTable,
|
|
traceRouteCtlDataSize,
|
|
traceRouteCtlTimeOut,
|
|
traceRouteCtlProbesPerHop,
|
|
traceRouteCtlPort,
|
|
traceRouteCtlMaxTtl,
|
|
traceRouteCtlDSField,
|
|
traceRouteCtlSourceAddressType,
|
|
traceRouteCtlSourceAddress,
|
|
traceRouteCtlIfIndex,
|
|
traceRouteCtlMiscOptions,
|
|
traceRouteCtlMaxFailures,
|
|
traceRouteCtlDontFragment,
|
|
traceRouteCtlInitialTtl,
|
|
traceRouteCtlFrequency,
|
|
traceRouteCtlStorageType,
|
|
traceRouteCtlAdminStatus,
|
|
traceRouteCtlMaxRows,
|
|
traceRouteCtlTrapGeneration,
|
|
traceRouteCtlDescr,
|
|
traceRouteCtlCreateHopsEntries,
|
|
traceRouteCtlType,
|
|
traceRouteResultsOperStatus,
|
|
traceRouteResultsCurHopCount,
|
|
traceRouteResultsCurProbeCount,
|
|
traceRouteResultsIpTgtAddrType,
|
|
traceRouteResultsIpTgtAddr,
|
|
traceRouteResultsTestAttempts,
|
|
traceRouteResultsTestSuccesses,
|
|
traceRouteResultsLastGoodPath
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects that constitute the remote traceroute
|
|
operation."
|
|
::= { traceRouteGroups 5 }
|
|
|
|
traceRouteCtlRowStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
traceRouteCtlRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RowStatus object of the traceRouteCtlTable."
|
|
::= { traceRouteGroups 6 }
|
|
|
|
traceRouteHistoryGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
traceRouteProbeHistoryHAddrType,
|
|
traceRouteProbeHistoryHAddr,
|
|
traceRouteProbeHistoryResponse,
|
|
traceRouteProbeHistoryStatus,
|
|
traceRouteProbeHistoryLastRC,
|
|
traceRouteProbeHistoryTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects that constitute the history
|
|
capability."
|
|
::= { traceRouteGroups 7 }
|
|
|
|
traceRouteNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
traceRoutePathChange,
|
|
traceRouteTestFailed,
|
|
traceRouteTestCompleted
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notifications that are required to be supported by
|
|
implementations of this MIB."
|
|
::= { traceRouteGroups 3 }
|
|
|
|
traceRouteHopsTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
traceRouteHopsIpTgtAddressType,
|
|
traceRouteHopsIpTgtAddress,
|
|
traceRouteHopsMinRtt,
|
|
traceRouteHopsMaxRtt,
|
|
traceRouteHopsAverageRtt,
|
|
traceRouteHopsRttSumOfSquares,
|
|
traceRouteHopsSentProbes,
|
|
traceRouteHopsProbeResponses,
|
|
traceRouteHopsLastGoodProbe
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects that constitute the
|
|
traceRouteHopsTable."
|
|
::= { traceRouteGroups 4 }
|
|
|
|
traceRouteGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
traceRouteMaxConcurrentRequests,
|
|
traceRouteCtlTargetAddressType,
|
|
traceRouteCtlTargetAddress,
|
|
traceRouteCtlByPassRouteTable,
|
|
traceRouteCtlDataSize,
|
|
traceRouteCtlTimeOut,
|
|
traceRouteCtlProbesPerHop,
|
|
traceRouteCtlPort,
|
|
traceRouteCtlMaxTtl,
|
|
traceRouteCtlDSField,
|
|
traceRouteCtlSourceAddressType,
|
|
traceRouteCtlSourceAddress,
|
|
traceRouteCtlIfIndex,
|
|
traceRouteCtlMiscOptions,
|
|
traceRouteCtlMaxFailures,
|
|
traceRouteCtlDontFragment,
|
|
traceRouteCtlInitialTtl,
|
|
traceRouteCtlFrequency,
|
|
traceRouteCtlStorageType,
|
|
traceRouteCtlAdminStatus,
|
|
traceRouteCtlMaxRows,
|
|
traceRouteCtlTrapGeneration,
|
|
traceRouteCtlDescr,
|
|
traceRouteCtlCreateHopsEntries,
|
|
traceRouteCtlType,
|
|
traceRouteCtlRowStatus,
|
|
traceRouteResultsOperStatus,
|
|
traceRouteResultsCurHopCount,
|
|
traceRouteResultsCurProbeCount,
|
|
traceRouteResultsIpTgtAddrType,
|
|
traceRouteResultsIpTgtAddr,
|
|
traceRouteResultsTestAttempts,
|
|
traceRouteResultsTestSuccesses,
|
|
traceRouteProbeHistoryHAddrType,
|
|
traceRouteProbeHistoryHAddr,
|
|
traceRouteProbeHistoryResponse,
|
|
traceRouteProbeHistoryStatus,
|
|
traceRouteProbeHistoryLastRC
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The group of objects that constitute the remote traceroute
|
|
operation."
|
|
::= { traceRouteGroups 1 }
|
|
|
|
traceRouteTimeStampGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
traceRouteResultsLastGoodPath,
|
|
traceRouteProbeHistoryTime
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The group of DateAndTime objects."
|
|
::= { traceRouteGroups 2 }
|
|
|
|
END
|