Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2439 lines
91 KiB
Text
2439 lines
91 KiB
Text
|
|
ZTE-AN-ENVMON-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
RowStatus FROM SNMPv2-TC
|
|
DisplayString FROM SNMPv2-TC
|
|
TruthValue FROM SNMPv2-TC
|
|
DateAndTime FROM SNMPv2-TC
|
|
MODULE-IDENTITY FROM SNMPv2-SMI
|
|
OBJECT-TYPE FROM SNMPv2-SMI
|
|
Integer32 FROM SNMPv2-SMI
|
|
IpAddress FROM SNMPv2-SMI
|
|
Counter64 FROM SNMPv2-SMI
|
|
Unsigned32 FROM SNMPv2-SMI
|
|
NOTIFICATION-TYPE FROM SNMPv2-SMI
|
|
zxAccessNode FROM ZTE-AN-SMI
|
|
zxAnEquipment FROM ZTE-AN-SMI
|
|
MODULE-COMPLIANCE FROM SNMPv2-CONF
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
HCPerfCurrentCount FROM HC-PerfHist-TC-MIB;
|
|
|
|
zxAnEnvMonMib MODULE-IDENTITY
|
|
LAST-UPDATED "201412230000Z"
|
|
ORGANIZATION "ZTE Corporation"
|
|
CONTACT-INFO "Mei YuLing ZTE Corporation
|
|
Mail: mei.yuLing@zte.com.cn
|
|
Tel : +86-21-68897315"
|
|
DESCRIPTION "This MIB defines zte Access Node managed environment
|
|
monitor."
|
|
REVISION "201412230000Z"
|
|
DESCRIPTION
|
|
"modify the range of fan tray speed percentage."
|
|
REVISION "201312310000Z"
|
|
DESCRIPTION
|
|
"add fan tray SN configuration."
|
|
REVISION "201204270000Z"
|
|
DESCRIPTION
|
|
"add fan unified configuration."
|
|
REVISION "201204180000Z"
|
|
DESCRIPTION
|
|
"add overheat protection."
|
|
REVISION "201110170000Z"
|
|
DESCRIPTION
|
|
"add details of fan speed level."
|
|
REVISION "201105260000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { zxAnEquipment 10 }
|
|
|
|
ZxAnEnvShutdownServiceType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of service type defined in environment monitor module
|
|
that may be shut down in protection action,
|
|
each bit refers to a type:
|
|
Bit 00 : xPON service.
|
|
Bit 01 : xDSL service.
|
|
Bit 02 : P2P service.
|
|
Bit 03 : narrowband service."
|
|
SYNTAX BITS {
|
|
xpon(0),
|
|
xdsl(1),
|
|
p2p(2),
|
|
narrowband(3)
|
|
}
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- Following management objects are defined.
|
|
-- 1. Environment Management Capability Table
|
|
-- 2. Environment Temperature Table
|
|
-- 3. Card Environment Performance Table
|
|
--- 3.1. zxAnCardEnvParamTable
|
|
--- 3.2. zxAnCardEnvHis15MinPerfTable
|
|
--- 3.3. zxAnCardEnvHis1DayPerfTable
|
|
--- 3.4. zxAnCardEnvAlmProfileConfTable
|
|
--- 3.5. zxAnCardEnvAlmProfileApplyTable
|
|
--- 3.6. zxAnCardEnvAlmProfileTable
|
|
--- 3.7. zxAnEnvOverheatProtectTable
|
|
--- 3.8. zxAnEnvCardOverheatProtectTable
|
|
-- 4. Environment Interface Connection Management Table
|
|
-- 5. Power Supply Management Table
|
|
-- 6. Fan Management Objects
|
|
-- 6.1 Fan Tray Control table
|
|
-- 6.2 Fans Control And Operational Status table
|
|
-- 6.3 Fan Tray Reset Objects
|
|
-- 8. Environment Device Objects
|
|
-- 9. Environment Device Switch Objects
|
|
|
|
-- Following notification objects are defined.
|
|
-- 21. zxAnEnvMonNotifications
|
|
|
|
-- Following conformance information is defined.
|
|
-- 31. zxAnEnvMonConformance
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnEnvMonGlobalObjects OBJECT IDENTIFIER::={zxAnEnvMonMib 1}
|
|
zxAnEnvMonObjects OBJECT IDENTIFIER::={zxAnEnvMonMib 2}
|
|
zxAnEnvMonNotifications OBJECT IDENTIFIER::={zxAnEnvMonMib 3}
|
|
|
|
zxAnEnvParamObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 1}
|
|
zxAnEnvMonInterfaceObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 2}
|
|
zxAnEnvPowerSupplyObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 3}
|
|
zxAnEnvFanObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 4}
|
|
zxAnEnvDeviceObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 5}
|
|
|
|
zxAnEnvFanTrayResetObjects OBJECT IDENTIFIER::={zxAnEnvFanObjects 12}
|
|
|
|
zxAnEnvParamGlobalObjects OBJECT IDENTIFIER::={zxAnEnvParamObjects 1}
|
|
|
|
zxAnPowerSupplyGlobalObjects
|
|
OBJECT IDENTIFIER ::= { zxAnEnvPowerSupplyObjects 1}
|
|
|
|
zxAnEnvMonTempTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 1}
|
|
zxAnEnvMonInterfaceTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 2}
|
|
zxAnEnvMonPowerSupplyTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 3}
|
|
zxAnEnvMonFanTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 4}
|
|
zxAnEnvDeviceTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 5}
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 1. Environment Management Capability Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvMonCapabilities OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
envTemperature(0),
|
|
fanAlarmBeep(1),
|
|
fanAutoSwitchByCardInstall(2),
|
|
fanSpeedCtrlBasedTemperature(3),
|
|
fanFixSpeed(4),
|
|
singleFanShutdown(5),
|
|
mpTemperature(6),
|
|
powerSupply(7),
|
|
cardTemperature(8),
|
|
fanSpeedPercentage(9),
|
|
backplaneInterface(10),
|
|
envMonitorInterfaceTrapEnable(11),
|
|
slaveShelfFanConfig(12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The environment management capabilities of this equipment.The bit
|
|
value 1 means the function represented by this bit is supported by
|
|
this equipment.
|
|
|
|
NOTE:
|
|
Not recommended to display it in NMS.
|
|
"
|
|
::= { zxAnEnvMonGlobalObjects 1 }
|
|
|
|
zxAnEnvCardShutdownReason OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
envHighTemperature(1),
|
|
cardHighTemperature(2),
|
|
chipHighTemperature(3),
|
|
emergencyPowerSaving(4)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alarm reason of zxAnEnvCardShutdownAlm.
|
|
envHighTemperature(1): Environment temperature is too high.
|
|
cardHighTemperature(2):Card self temperature is too high.
|
|
chipHighTemperature(3):Card's chip temperature is too high.
|
|
emergencyPowerSaving(4):Emergency power saving action has been
|
|
taken caused by AC power failure.
|
|
"
|
|
::= { zxAnEnvParamGlobalObjects 1 }
|
|
-------------------------------------------------------------------------------
|
|
-- 2. Environment Temperature Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvParamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEnvParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes environment temperature information."
|
|
::= { zxAnEnvParamObjects 5 }
|
|
|
|
zxAnEnvParamEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEnvParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of zxAnEnvParamTable. "
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf }
|
|
::= { zxAnEnvParamTable 1 }
|
|
|
|
ZxAnEnvParamEntry ::= SEQUENCE {
|
|
zxAnEnvRack Integer32,
|
|
zxAnEnvShelf Integer32,
|
|
zxAnEnvTemp Integer32,
|
|
zxAnEnvTempHighAlmThreshold Integer32,
|
|
zxAnEnvTempCriticalAlmThreshold Integer32,
|
|
zxAnEnvTempLowAlmThreshold Integer32,
|
|
zxAnEnvShelfPowerConsumption Integer32,
|
|
zxAnEnvShelfVoltage Integer32,
|
|
zxAnEnvShelfCurrent Integer32
|
|
}
|
|
|
|
zxAnEnvRack OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of rack."
|
|
::= { zxAnEnvParamEntry 1 }
|
|
|
|
zxAnEnvShelf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of shelf."
|
|
::= { zxAnEnvParamEntry 2 }
|
|
|
|
zxAnEnvTemp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature of the environment."
|
|
::= { zxAnEnvParamEntry 3 }
|
|
|
|
zxAnEnvTempHighAlmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(45..95)
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature high alarm threshold of the environment."
|
|
DEFVAL { 75 }
|
|
::= { zxAnEnvParamEntry 4 }
|
|
|
|
zxAnEnvTempCriticalAlmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature critical alarm threshold of the environment."
|
|
DEFVAL { 100 }
|
|
::= { zxAnEnvParamEntry 5 }
|
|
|
|
zxAnEnvTempLowAlmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(-40..0)
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature low alarm threshold of the environment."
|
|
::= { zxAnEnvParamEntry 6 }
|
|
|
|
zxAnEnvShelfPowerConsumption OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001W"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power consumption of the shelf.
|
|
Value 0 means not available."
|
|
::= { zxAnEnvParamEntry 7 }
|
|
|
|
zxAnEnvShelfVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001Volts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Voltage of the shelf.
|
|
Value 0 means not available."
|
|
::= { zxAnEnvParamEntry 8 }
|
|
|
|
zxAnEnvShelfCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001Amp"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current of the shelf.
|
|
Value 0 means not available."
|
|
::= { zxAnEnvParamEntry 9 }
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 3. Card Environment Performance Table
|
|
-- 3.1. zxAnCardEnvParamTable
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnCardEnvParamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCardEnvParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes card temperature information."
|
|
::= { zxAnEnvParamObjects 6 }
|
|
|
|
zxAnCardEnvParamEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCardEnvParamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of zxAnCardEnvParamTable. "
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
|
|
::= { zxAnCardEnvParamTable 1 }
|
|
|
|
ZxAnCardEnvParamEntry ::= SEQUENCE {
|
|
zxAnEnvSlot Integer32,
|
|
zxAnCardTemp Integer32,
|
|
zxAnCardPowerConsumption Integer32,
|
|
zxAnCardVoltage Integer32,
|
|
zxAnCardCurrent Integer32,
|
|
zxAnCardCriticalTempAlmThreshold Integer32,
|
|
zxAnCardOptHighestTemp Integer32,
|
|
zxAnCardOptCriticalTempAlmThresh Integer32,
|
|
zxAnCardOptHighestTempPortNo Integer32,
|
|
zxAnCardHeatRadiationAlmThresh Integer32
|
|
}
|
|
|
|
zxAnEnvSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of slot, the range is [0,20] of 19-inch
|
|
shelf and [0,22] of 21-inch shelf."
|
|
::= { zxAnCardEnvParamEntry 1 }
|
|
|
|
zxAnCardTemp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current temperature of the card environment.
|
|
|
|
NOTE:
|
|
1. In current system, only certain cards support
|
|
temperature-reading, such as SCXL, GTGOD cards.
|
|
2. If the card is not configured, we cannot get its
|
|
temperature.
|
|
3. For the configured but not support temperature-reading
|
|
cards, we use -1000 as an invalid temperature value to note
|
|
its temperature.
|
|
"
|
|
::= { zxAnCardEnvParamEntry 2 }
|
|
|
|
zxAnCardPowerConsumption OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001W"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power consumption of the card.
|
|
Value 0 means not available."
|
|
::= { zxAnCardEnvParamEntry 3 }
|
|
|
|
zxAnCardVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001Volts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Voltage of the card.
|
|
Value 0 means not available."
|
|
::= { zxAnCardEnvParamEntry 4 }
|
|
|
|
zxAnCardCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001Amp"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current of the card.
|
|
Value 0 means not available."
|
|
::= { zxAnCardEnvParamEntry 5 }
|
|
|
|
zxAnCardCriticalTempAlmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The critical temperature alarm threshold of the card."
|
|
::= { zxAnCardEnvParamEntry 6 }
|
|
|
|
zxAnCardOptHighestTemp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001Degrees"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest temperature of the optical modules in the card."
|
|
::= { zxAnCardEnvParamEntry 7 }
|
|
|
|
zxAnCardOptCriticalTempAlmThresh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The critical optical temperature alarm threshold."
|
|
::= { zxAnCardEnvParamEntry 8 }
|
|
|
|
zxAnCardOptHighestTempPortNo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port No. which the optical module is located at, and the
|
|
optical module has the highest temperature."
|
|
::= { zxAnCardEnvParamEntry 9 }
|
|
|
|
zxAnCardHeatRadiationAlmThresh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The heat radiation abnormal alarm threshold of the card."
|
|
::= { zxAnCardEnvParamEntry 10 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 3.2. zxAnCardEnvHis15MinPerfTable
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnCardEnvHis15MinPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCardEnvHis15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data table of card
|
|
temperature."
|
|
::= { zxAnEnvParamObjects 7 }
|
|
|
|
zxAnCardEnvHis15MinPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCardEnvHis15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data entry of card
|
|
temperature."
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot,
|
|
zxAnCardEnvHis15MinIntervalNo }
|
|
::= { zxAnCardEnvHis15MinPerfTable 1 }
|
|
|
|
ZxAnCardEnvHis15MinPerfEntry ::= SEQUENCE {
|
|
zxAnCardEnvHis15MinIntervalNo Integer32,
|
|
zxAnCardEnvHis15MinDateTime DateAndTime,
|
|
zxAnCardEnvHis15MinTemp Counter64
|
|
}
|
|
|
|
zxAnCardEnvHis15MinIntervalNo OBJECT-TYPE
|
|
SYNTAX Integer32(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number 1 is the the most recent
|
|
previous interval; interval 96 is 24 hours ago.
|
|
Intervals 2..96 are optional."
|
|
::= { zxAnCardEnvHis15MinPerfEntry 1 }
|
|
|
|
zxAnCardEnvHis15MinDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data generation time."
|
|
::= { zxAnCardEnvHis15MinPerfEntry 2 }
|
|
|
|
zxAnCardEnvHis15MinTemp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval average temperature of card."
|
|
::= { zxAnCardEnvHis15MinPerfEntry 3 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 3.3. zxAnCardEnvHis1DayPerfTable
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnCardEnvHis1DayPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCardEnvHis1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data table of card temperature."
|
|
::= { zxAnEnvParamObjects 8 }
|
|
|
|
zxAnCardEnvHis1DayPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCardEnvHis1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data entry of card temperature."
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot,
|
|
zxAnCardEnvHis1DayIntervalNo }
|
|
::= { zxAnCardEnvHis1DayPerfTable 1 }
|
|
|
|
ZxAnCardEnvHis1DayPerfEntry ::= SEQUENCE {
|
|
zxAnCardEnvHis1DayIntervalNo Integer32,
|
|
zxAnCardEnvHis1DayDateTime DateAndTime,
|
|
zxAnCardEnvHis1DayTemp Counter64
|
|
}
|
|
|
|
zxAnCardEnvHis1DayIntervalNo OBJECT-TYPE
|
|
SYNTAX Integer32(1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number 1 is the the most recent
|
|
previous interval; interval 7 is 1 week ago.
|
|
Intervals 2..7 are optional."
|
|
::= { zxAnCardEnvHis1DayPerfEntry 1 }
|
|
|
|
zxAnCardEnvHis1DayDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data generation time."
|
|
::= { zxAnCardEnvHis1DayPerfEntry 2 }
|
|
|
|
zxAnCardEnvHis1DayTemp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval average temperature of card."
|
|
::= { zxAnCardEnvHis1DayPerfEntry 3 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 3.4. zxAnCardEnvAlmProfileConfTable
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnCardEnvAlmProfileConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile items configuration table
|
|
of card temperature."
|
|
::= { zxAnEnvParamObjects 9 }
|
|
|
|
zxAnCardEnvAlmProfileConfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCardEnvAlmProfileConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile items configuration entry
|
|
of card temperature."
|
|
INDEX { zxAnCardEnvAlmProfileName, zxAnCardEnvPerfVariable }
|
|
::= { zxAnCardEnvAlmProfileConfTable 1 }
|
|
|
|
ZxAnCardEnvAlmProfileConfEntry ::= SEQUENCE {
|
|
zxAnCardEnvAlmProfileName DisplayString,
|
|
zxAnCardEnvPerfVariable OBJECT IDENTIFIER,
|
|
zxAnCardEnvRiseAlmThresh HCPerfCurrentCount,
|
|
zxAnCardEnvClrRiseAlmThresh HCPerfCurrentCount,
|
|
zxAnCardEnvRiseWarnThresh HCPerfCurrentCount,
|
|
zxAnCardEnvClrRiseWarnThresh HCPerfCurrentCount,
|
|
zxAnCardEnvFallWarnThresh HCPerfCurrentCount,
|
|
zxAnCardEnvClrFallWarnThresh HCPerfCurrentCount,
|
|
zxAnCardEnvFallAlmThresh HCPerfCurrentCount,
|
|
zxAnCardEnvClrFallAlmThresh HCPerfCurrentCount,
|
|
zxAnCardEnvAlmPrfConfRowStatus RowStatus
|
|
}
|
|
|
|
zxAnCardEnvAlmProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile name."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 1 }
|
|
|
|
zxAnCardEnvPerfVariable OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of performance variables."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 2 }
|
|
|
|
zxAnCardEnvRiseAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising alarm."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 3 }
|
|
|
|
zxAnCardEnvClrRiseAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising alarm restore."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 4 }
|
|
|
|
zxAnCardEnvRiseWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising warning."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 5 }
|
|
|
|
zxAnCardEnvClrRiseWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising warning restore."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 6 }
|
|
|
|
zxAnCardEnvFallWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling warning."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 7 }
|
|
|
|
zxAnCardEnvClrFallWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling warning restore."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 8 }
|
|
|
|
zxAnCardEnvFallAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling alarm."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 9 }
|
|
|
|
zxAnCardEnvClrFallAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling alarm restore."
|
|
::= { zxAnCardEnvAlmProfileConfEntry 10 }
|
|
|
|
zxAnCardEnvAlmPrfConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
To create a row in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a row in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnCardEnvAlmProfileConfEntry 50 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 3.5. zxAnCardEnvAlmProfileApplyTable
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnCardEnvAlmProfileApplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileApplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile application table of
|
|
card temperature."
|
|
::= { zxAnEnvParamObjects 10 }
|
|
|
|
zxAnCardEnvAlmProfileApplyEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCardEnvAlmProfileApplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile application entry of
|
|
card temperature."
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
|
|
::= { zxAnCardEnvAlmProfileApplyTable 1 }
|
|
|
|
ZxAnCardEnvAlmProfileApplyEntry ::= SEQUENCE {
|
|
zxAnCardEnvAlmPrf DisplayString,
|
|
zxAnCardEnvAlmPrfApplyRowStatus RowStatus
|
|
}
|
|
|
|
zxAnCardEnvAlmPrf OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile."
|
|
::= { zxAnCardEnvAlmProfileApplyEntry 1 }
|
|
|
|
zxAnCardEnvAlmPrfApplyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
To create a row in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a row in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnCardEnvAlmProfileApplyEntry 50 }
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 3.6. zxAnCardEnvAlmProfileTable
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnCardEnvAlmProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile table of card
|
|
temperature."
|
|
::= { zxAnEnvParamObjects 11 }
|
|
|
|
zxAnCardEnvAlmProfileEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCardEnvAlmProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile entry of
|
|
card temperature."
|
|
INDEX { zxAnCardEnvAlmProfileName }
|
|
::= { zxAnCardEnvAlmProfileTable 1 }
|
|
|
|
ZxAnCardEnvAlmProfileEntry ::= SEQUENCE {
|
|
zxAnCardEnvAlmPrfRowStatus RowStatus
|
|
}
|
|
|
|
zxAnCardEnvAlmPrfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
To create a row in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a row in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnCardEnvAlmProfileEntry 50 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
--- 3.7. zxAnEnvOverheatProtectTable
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvOverheatProtectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEnvOverheatProtectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Environment overheat protection table."
|
|
::= { zxAnEnvParamObjects 13 }
|
|
|
|
zxAnEnvOverheatProtectEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEnvOverheatProtectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Environment overheat protection entry.
|
|
|
|
To modify zxAnEnvOverheatProtectEnable from disabled to enabled,
|
|
zxAnEnvOverheatProtectEnable is mandatory,
|
|
zxAnEnvOverheatProtectDelay is optional.
|
|
|
|
To modify zxAnEnvOverheatProtectEnable from enabled to disabled,
|
|
only zxAnEnvOverheatProtectEnable is mandatory."
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf }
|
|
::= { zxAnEnvOverheatProtectTable 1 }
|
|
|
|
ZxAnEnvOverheatProtectEntry ::= SEQUENCE {
|
|
zxAnEnvOverheatProtectEnable INTEGER,
|
|
zxAnEnvOverheatProtectDelay Integer32,
|
|
zxAnEnvOverheatProtectFirstStep ZxAnEnvShutdownServiceType,
|
|
zxAnEnvOverheatProtectSecondStep ZxAnEnvShutdownServiceType
|
|
}
|
|
|
|
zxAnEnvOverheatProtectEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables the environment overheat protection function."
|
|
DEFVAL { disabled }
|
|
::= { zxAnEnvOverheatProtectEntry 1 }
|
|
|
|
zxAnEnvOverheatProtectDelay OBJECT-TYPE
|
|
SYNTAX Integer32(1..60)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delaying time between two steps.
|
|
For example, when temperature is higher than the threshold, takes an
|
|
action as the step 1, and delays the value of
|
|
zxAnEnvOverheatProtectDelay, if the temperature is still higher than
|
|
the threshold, takes an action as step 2."
|
|
DEFVAL { 10 }
|
|
::= { zxAnEnvOverheatProtectEntry 2 }
|
|
|
|
zxAnEnvOverheatProtectFirstStep OBJECT-TYPE
|
|
SYNTAX ZxAnEnvShutdownServiceType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first step when the environment temperature exceeds
|
|
zxAnEnvTempHighAlmThreshold."
|
|
DEFVAL { {xpon,xdsl,p2p} }
|
|
::= { zxAnEnvOverheatProtectEntry 3 }
|
|
|
|
zxAnEnvOverheatProtectSecondStep OBJECT-TYPE
|
|
SYNTAX ZxAnEnvShutdownServiceType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second step when the environment temperature still exceeds
|
|
zxAnEnvTempHighAlmThreshold after first step has been done."
|
|
DEFVAL { {narrowband} }
|
|
::= { zxAnEnvOverheatProtectEntry 4 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
--- 3.8. zxAnEnvCardOverheatProtectTable
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvCardOverheatProtectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEnvCardOverheatProtectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Card overheat protection table."
|
|
::= { zxAnEnvParamObjects 14 }
|
|
|
|
zxAnEnvCardOverheatProtectEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEnvCardOverheatProtectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Card overheat protection entry."
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf }
|
|
::= { zxAnEnvCardOverheatProtectTable 1 }
|
|
|
|
ZxAnEnvCardOverheatProtectEntry ::= SEQUENCE {
|
|
zxAnEnvCardCriticalTempProtectEn INTEGER
|
|
}
|
|
|
|
zxAnEnvCardCriticalTempProtectEn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables the card critical temperature protection
|
|
function. If it is enabled, the card will be stopped when the card
|
|
temperature is higher than the card critical temperature."
|
|
DEFVAL { enabled }
|
|
::= { zxAnEnvCardOverheatProtectEntry 1 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 4. Environment Interface Connection Management Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvMonInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEnvMonInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes the environment interface information."
|
|
::= { zxAnEnvMonInterfaceObjects 5 }
|
|
|
|
zxAnEnvMonInterfaceEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEnvMonInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of zxAnEnvMonInterfaceTable. "
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf }
|
|
::= { zxAnEnvMonInterfaceTable 1 }
|
|
|
|
ZxAnEnvMonInterfaceEntry ::= SEQUENCE {
|
|
zxAnEnvMonInterfaceUsage INTEGER,
|
|
zxAnEnvEpmConnectPort INTEGER,
|
|
zxAnEnvBackplaneInterfaceUsage INTEGER
|
|
}
|
|
|
|
zxAnEnvMonInterfaceUsage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
epm(1),
|
|
fanTray(2),
|
|
noUse(3),
|
|
noSupport(4),
|
|
etmWithTestSubcard(5),
|
|
etmWithoutTestSubcard(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The equipment type connected to the environment monitor interface.
|
|
"
|
|
DEFVAL { fanTray }
|
|
::= { zxAnEnvMonInterfaceEntry 1 }
|
|
|
|
zxAnEnvEpmConnectPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
port0(1),
|
|
port1(2),
|
|
notconfigured(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port no which epm connect"
|
|
::= { zxAnEnvMonInterfaceEntry 2 }
|
|
|
|
zxAnEnvBackplaneInterfaceUsage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fan(1),
|
|
noUse(3),
|
|
noSupport(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The equipment type connected to the Backplane Interface.
|
|
fan(1): the fan connect to the Backplane Interface;
|
|
noUse(3): not used;
|
|
noSupport(255):not support.
|
|
"
|
|
::= { zxAnEnvMonInterfaceEntry 3 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 5. Power Supply Management Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvEmergencyPowerSaveEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables the emergency power saving."
|
|
DEFVAL { disabled }
|
|
::= { zxAnPowerSupplyGlobalObjects 1 }
|
|
|
|
zxAnEnvEmergencyPowerSaveDelay OBJECT-TYPE
|
|
SYNTAX Integer32(0..1440)
|
|
UNITS "Minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If AC power failure lasts more than zxAnEnvEmergencyPowerSaveDelay,
|
|
emergency power saving action will be taken."
|
|
DEFVAL { 60 }
|
|
::= { zxAnPowerSupplyGlobalObjects 2 }
|
|
|
|
zxAnEnvEmergencyPowerSaveRecover OBJECT-TYPE
|
|
SYNTAX Integer32(0..1440)
|
|
UNITS "Minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If AC power recovered, after this delay, the emergency power save
|
|
action will be cancelled."
|
|
DEFVAL { 0 }
|
|
::= { zxAnPowerSupplyGlobalObjects 3 }
|
|
|
|
zxAnEnvEmergencyPowerSaveSvcType OBJECT-TYPE
|
|
SYNTAX ZxAnEnvShutdownServiceType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service types will be shut down in emergency power saving
|
|
action."
|
|
DEFVAL { {xpon, xdsl, p2p} }
|
|
::= { zxAnPowerSupplyGlobalObjects 4 }
|
|
|
|
zxAnEnvPowerMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
battery(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current power supply mode of the equipment, emergency power
|
|
saving action is on the basis of the power mode zxAnEnvPowerMode.
|
|
normal(1) means using AC power as power supply.
|
|
battery(2) means using storage battery as power supply.
|
|
"
|
|
DEFVAL { normal }
|
|
::= { zxAnPowerSupplyGlobalObjects 5 }
|
|
|
|
zxAnEnvEmergencyBatteryVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001Volts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current voltage of the battery."
|
|
::= { zxAnPowerSupplyGlobalObjects 6 }
|
|
|
|
zxAnEnvEmergencyBatteryThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(45000..53000)
|
|
UNITS "0.001Volts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold of the battery voltage.
|
|
If the battery voltage is less than
|
|
zxAnEnvEmergencyBatteryThreshold, the emergency power saving action
|
|
will be taken."
|
|
DEFVAL { 48000 }
|
|
::= { zxAnPowerSupplyGlobalObjects 7 }
|
|
|
|
zxAnPowerSupplyCapabilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnPowerSupplyCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes power supply capability table."
|
|
::= { zxAnEnvPowerSupplyObjects 10 }
|
|
|
|
zxAnPowerSupplyCapabilityEntry OBJECT-TYPE
|
|
SYNTAX ZxAnPowerSupplyCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of zxAnPowerSupplyCapabilityTable."
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf }
|
|
::= { zxAnPowerSupplyCapabilityTable 1 }
|
|
|
|
ZxAnPowerSupplyCapabilityEntry ::= SEQUENCE
|
|
{
|
|
zxAnPowerSupplyMaxPowerNum Integer32
|
|
}
|
|
|
|
zxAnPowerSupplyMaxPowerNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max number of power supply in the equipment."
|
|
::= { zxAnPowerSupplyCapabilityEntry 1 }
|
|
|
|
--- Power supply table
|
|
|
|
zxAnPowerSupplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnPowerSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes power supply table."
|
|
::= { zxAnEnvPowerSupplyObjects 11 }
|
|
|
|
zxAnPowerSupplyEntry OBJECT-TYPE
|
|
SYNTAX ZxAnPowerSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in zxAnPowerSupplyTable."
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
|
|
::= { zxAnPowerSupplyTable 1 }
|
|
|
|
ZxAnPowerSupplyEntry ::= SEQUENCE
|
|
{
|
|
zxAnPowerSupplyOperStatus INTEGER,
|
|
zxAnPowerSupplyInVoltage Integer32,
|
|
zxAnPowerSupplyInVoltageStatus INTEGER,
|
|
zxAnPowerInVoltageUpperThresh Integer32,
|
|
zxAnPowerInVoltageLowerThresh Integer32,
|
|
zxAnPowerSupplyInCurrent Integer32,
|
|
zxAnPowerInCurrentThresh Integer32
|
|
}
|
|
|
|
zxAnPowerSupplyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inService(1),
|
|
hwOffline(2),
|
|
powerFaulty(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of the power supply module."
|
|
::= { zxAnPowerSupplyEntry 1 }
|
|
|
|
zxAnPowerSupplyInVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Volts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual input volts of the power supply module."
|
|
::= { zxAnPowerSupplyEntry 2 }
|
|
|
|
zxAnPowerSupplyInVoltageStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
overVoltage(2),
|
|
underVoltage(3),
|
|
off(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The volt status of the power supply.
|
|
|
|
normal(1) -- The input power is normal.
|
|
overVoltage(2) -- The input power is over voltage.
|
|
underVoltage(3) -- The input power is under voltage.
|
|
off(4)) -- No power input.
|
|
"
|
|
::= { zxAnPowerSupplyEntry 3 }
|
|
|
|
zxAnPowerInVoltageUpperThresh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Volts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper threshold of input volts.The alarm should be generated
|
|
when zxAnPowerSupplyInVoltage exceeds this threshold.
|
|
If it is 0, no alarm reported to manager."
|
|
DEFVAL { 0 }
|
|
::= { zxAnPowerSupplyEntry 4 }
|
|
|
|
|
|
zxAnPowerInVoltageLowerThresh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Volts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower threshold of input volts.The alarm should be generated
|
|
when zxAnPowerSupplyInVoltage is lower than this threshold.
|
|
If it is 0, no alarm reported to manager."
|
|
DEFVAL { 0 }
|
|
::= { zxAnPowerSupplyEntry 5 }
|
|
|
|
|
|
zxAnPowerSupplyInCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Amp"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual current of the power supply module."
|
|
::= { zxAnPowerSupplyEntry 6 }
|
|
|
|
|
|
zxAnPowerInCurrentThresh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Amp"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper threshold of input current.The alarm should be generated
|
|
when zxAnPowerSupplyInCurrent exceeds this threshold.
|
|
If it is 0, no alarm reported to manager."
|
|
DEFVAL { 0 }
|
|
::= { zxAnPowerSupplyEntry 7 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 6. Fan Management Objects
|
|
-- 6.1 Fan Tray Control table
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnEnvFanTrayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEnvFanTrayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Fan Tray Control table, with rack and shelf information."
|
|
::= { zxAnEnvFanObjects 10 }
|
|
|
|
zxAnEnvFanTrayEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEnvFanTrayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the zxAnEnvFanTrayTable."
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf }
|
|
::= { zxAnEnvFanTrayTable 1 }
|
|
|
|
ZxAnEnvFanTrayEntry ::= SEQUENCE
|
|
{ zxAnFanTrayAlarmBeepEnable INTEGER,
|
|
zxAnFanTrayAutoSwitchByCardUp INTEGER,
|
|
zxAnFanTrayHardwareVersion DisplayString,
|
|
zxAnFanTraySoftwareVersion DisplayString,
|
|
zxAnFanTraySpeedCtrlMode INTEGER,
|
|
zxAnFanTrayLowSpeed Integer32,
|
|
zxAnFanTrayStdSpeed Integer32,
|
|
zxAnFanTrayHighSpeed Integer32,
|
|
zxAnFanTraySuperSpeed Integer32,
|
|
zxAnFanTrayLowSpeedShiftTemp Integer32,
|
|
zxAnFanTrayStdSpeedShiftTemp Integer32,
|
|
zxAnFanTrayHighSpeedShiftTemp Integer32,
|
|
zxAnFanTraySuperSpeedShiftTemp Integer32,
|
|
zxAnFanTrayLowSpeedPercent INTEGER,
|
|
zxAnFanTrayStdSpeedPercent INTEGER,
|
|
zxAnFanTrayHighSpeedPercent INTEGER,
|
|
zxAnFanTraySuperSpeedPercent INTEGER,
|
|
zxAnFanTrayAdminStatus INTEGER,
|
|
zxAnFanTrayConfSpeedLevel INTEGER,
|
|
zxAnFanTrayPowerConsumption Integer32,
|
|
zxAnFanTraySn DisplayString,
|
|
zxAnFanTrayVoltage Integer32,
|
|
zxAnFanTrayCurrent Integer32,
|
|
zxAnFanTrayTemp Integer32
|
|
}
|
|
|
|
zxAnFanTrayAlarmBeepEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control status of the fan alarm beep."
|
|
DEFVAL { enable }
|
|
::= { zxAnEnvFanTrayEntry 1 }
|
|
|
|
zxAnFanTrayAutoSwitchByCardUp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable fan auto switch with card installation. If it is
|
|
enabled, the fan under the card should be switched to running
|
|
status when the card is installed. Otherwise, the fan should be
|
|
shutdown.
|
|
"
|
|
DEFVAL { disable }
|
|
::= { zxAnEnvFanTrayEntry 2 }
|
|
|
|
zxAnFanTrayHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The hardware version of the fan tray"
|
|
::= { zxAnEnvFanTrayEntry 3 }
|
|
|
|
zxAnFanTraySoftwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The software version of the fan tray"
|
|
::= { zxAnEnvFanTrayEntry 4 }
|
|
|
|
zxAnFanTraySpeedCtrlMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
temperatureBasedAutoCtrl(1),
|
|
fixSpeed(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The speed control mode of the fan.
|
|
When this value is fixSpeed,zxAnFanTrayAdminStatus,
|
|
zxAnFanTrayConfSpeedLevel,zxAnEnvFanAdminStatus and
|
|
zxAnEnvFanConfSpeedLevel can be configured."
|
|
DEFVAL { temperatureBasedAutoCtrl }
|
|
::= { zxAnEnvFanTrayEntry 5 }
|
|
|
|
zxAnFanTrayLowSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "RPM"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The speed value of the fan's low speed level.
|
|
The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
|
|
4000,4400.
|
|
NOTE:
|
|
Different equipment maybe has different default value.
|
|
"
|
|
::= { zxAnEnvFanTrayEntry 6 }
|
|
|
|
zxAnFanTrayStdSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "RPM"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The speed value of the fan's standard speed level.
|
|
The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
|
|
4000,4400.
|
|
NOTE:
|
|
Different equipment maybe has different default value.
|
|
"
|
|
::= { zxAnEnvFanTrayEntry 7 }
|
|
|
|
zxAnFanTrayHighSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "RPM"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The speed value of the fan's high speed level.
|
|
The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
|
|
4000,4400.
|
|
NOTE:
|
|
Different equipment maybe has different default value.
|
|
"
|
|
::= { zxAnEnvFanTrayEntry 8 }
|
|
|
|
zxAnFanTraySuperSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "RPM"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The speed value of the fan's super speed level.
|
|
The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
|
|
4000,4400.
|
|
NOTE:
|
|
Different equipment maybe has different default value.
|
|
"
|
|
::= { zxAnEnvFanTrayEntry 9 }
|
|
|
|
zxAnFanTrayLowSpeedShiftTemp OBJECT-TYPE
|
|
SYNTAX Integer32(0..55)
|
|
UNITS "centigrade"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The temperature to activate the fan tray to shift to
|
|
the low speed level.
|
|
"
|
|
::= { zxAnEnvFanTrayEntry 10 }
|
|
|
|
zxAnFanTrayStdSpeedShiftTemp OBJECT-TYPE
|
|
SYNTAX Integer32(5..60)
|
|
UNITS "centigrade"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The temperature to activate the fan tray to shift to
|
|
the standard speed level.
|
|
"
|
|
::= { zxAnEnvFanTrayEntry 11 }
|
|
|
|
zxAnFanTrayHighSpeedShiftTemp OBJECT-TYPE
|
|
SYNTAX Integer32(10..65)
|
|
UNITS "centigrade"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The temperature to activate the fan tray to shift to
|
|
the high speed level.
|
|
"
|
|
::= { zxAnEnvFanTrayEntry 12 }
|
|
|
|
zxAnFanTraySuperSpeedShiftTemp OBJECT-TYPE
|
|
SYNTAX Integer32(15..70)
|
|
UNITS "centigrade"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The temperature to activate the fan tray to shift to
|
|
the super speed level.
|
|
"
|
|
::= { zxAnEnvFanTrayEntry 13 }
|
|
|
|
zxAnFanTrayLowSpeedPercent OBJECT-TYPE
|
|
SYNTAX INTEGER(10..97)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The percentage of speed of the low speed level."
|
|
DEFVAL{30}
|
|
::= { zxAnEnvFanTrayEntry 14 }
|
|
|
|
zxAnFanTrayStdSpeedPercent OBJECT-TYPE
|
|
SYNTAX INTEGER(11..98)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The percentage of speed of the standard speed level."
|
|
DEFVAL{50}
|
|
::= { zxAnEnvFanTrayEntry 15 }
|
|
|
|
|
|
zxAnFanTrayHighSpeedPercent OBJECT-TYPE
|
|
SYNTAX INTEGER(12..99)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The percentage of speed of the high speed level."
|
|
DEFVAL{70}
|
|
::= { zxAnEnvFanTrayEntry 16 }
|
|
|
|
zxAnFanTraySuperSpeedPercent OBJECT-TYPE
|
|
SYNTAX INTEGER(13..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The percentage of speed of the super speed level."
|
|
DEFVAL{90}
|
|
::= { zxAnEnvFanTrayEntry 17 }
|
|
|
|
zxAnFanTrayAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The administrative status of the fan tray.
|
|
When zxAnFanTrayAdminStatus is configured, all the
|
|
zxAnEnvFanAdminStatus values are consistent with
|
|
zxAnFanTrayAdminStatus."
|
|
DEFVAL { up }
|
|
::= { zxAnEnvFanTrayEntry 18 }
|
|
|
|
zxAnFanTrayConfSpeedLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lowSpeed (1),
|
|
standardSpeed(2),
|
|
highSpeed (3),
|
|
superSpeed (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The configured speed level of the fan tray.
|
|
When zxAnFanTrayConfSpeedLevel is configured, all the
|
|
zxAnEnvFanConfSpeedLevel values are consistent with
|
|
zxAnFanTrayConfSpeedLevel.
|
|
This variable is valid if zxAnFanTrayAdminStatus is up."
|
|
DEFVAL { standardSpeed }
|
|
::= { zxAnEnvFanTrayEntry 19 }
|
|
|
|
zxAnFanTrayPowerConsumption OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001W"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power consumption of the fan tray.
|
|
Value 0 means not available."
|
|
::= { zxAnEnvFanTrayEntry 20 }
|
|
|
|
zxAnFanTraySn OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..12))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial number of fan tray."
|
|
DEFVAL { "" }
|
|
::= { zxAnEnvFanTrayEntry 21 }
|
|
|
|
zxAnFanTrayVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001Volts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Voltage of the fan tray.
|
|
Value 0 means not available."
|
|
::= { zxAnEnvFanTrayEntry 22 }
|
|
|
|
zxAnFanTrayCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.001Amp"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current of the fan tray.
|
|
Value 0 means not available."
|
|
::= { zxAnEnvFanTrayEntry 23 }
|
|
|
|
zxAnFanTrayTemp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature of the fan tray."
|
|
::= { zxAnEnvFanTrayEntry 24 }
|
|
-------------------------------------------------------------------------------
|
|
-- 6.2 Fans Control And Operational Status table
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnEnvFanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEnvFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes speed information and operational status of
|
|
the fan units."
|
|
::= { zxAnEnvFanObjects 11 }
|
|
|
|
zxAnEnvFanEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEnvFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of zxAnEnvFanTable. "
|
|
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvFanIndex }
|
|
::= { zxAnEnvFanTable 1 }
|
|
|
|
ZxAnEnvFanEntry ::= SEQUENCE {
|
|
zxAnEnvFanIndex Integer32,
|
|
zxAnEnvFanConfSpeedLevel INTEGER,
|
|
zxAnEnvFanActualSpeedLevel INTEGER,
|
|
zxAnEnvFanAdminStatus INTEGER,
|
|
zxAnEnvFanOperStatus INTEGER,
|
|
zxAnEnvFanOnlineStatus INTEGER,
|
|
zxAnEnvFanActualSpeed Integer32
|
|
}
|
|
zxAnEnvFanIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this fan unit.
|
|
|
|
For 19-inch shelf, there are 3 fans in each fan tray.
|
|
The fan index should be integer in [1,3].
|
|
|
|
For 21-inch shelf, there are 4 fans. The fan index should
|
|
be integer in [1,4]."
|
|
|
|
::= { zxAnEnvFanEntry 1 }
|
|
|
|
zxAnEnvFanConfSpeedLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lowSpeed (1),
|
|
standardSpeed(2),
|
|
highSpeed (3),
|
|
superSpeed (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured speed level of the fan unit singly."
|
|
DEFVAL { standardSpeed }
|
|
::= { zxAnEnvFanEntry 2 }
|
|
|
|
zxAnEnvFanActualSpeedLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lowSpeed (1),
|
|
standardSpeed(2),
|
|
highSpeed (3),
|
|
superSpeed (4),
|
|
other (10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The actual speed level of the fan unit."
|
|
::= { zxAnEnvFanEntry 3 }
|
|
|
|
zxAnEnvFanAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of the fan unit singly."
|
|
DEFVAL { up }
|
|
::= { zxAnEnvFanEntry 4 }
|
|
|
|
zxAnEnvFanOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational status of the fan unit."
|
|
::= { zxAnEnvFanEntry 5 }
|
|
|
|
zxAnEnvFanOnlineStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
online(1),
|
|
offline(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The actual online status of the fan unit."
|
|
::= { zxAnEnvFanEntry 6 }
|
|
|
|
zxAnEnvFanActualSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The actual speed of the fan unit.
|
|
NOTE:
|
|
If not supported, NMS should use the speed value of
|
|
zxAnEnvFanActualSpeedLevel."
|
|
::= { zxAnEnvFanEntry 7 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 6.3 Fan Tray Reset Objects
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvFanTrayResetRack OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rack number of the fan tray."
|
|
::= { zxAnEnvFanTrayResetObjects 1 }
|
|
|
|
zxAnEnvFanTrayResetShelfList OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 16 ) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The shelf number list of the fan tray.
|
|
They can be reset in batch, for example: 1,2,3.
|
|
Setting this object to empty means all the fan trays
|
|
connected with zxAnEnvFanTrayRack will be reset."
|
|
::= { zxAnEnvFanTrayResetObjects 2 }
|
|
|
|
zxAnEnvFanTrayResetAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the fan trays.
|
|
To query this object, always return 1."
|
|
::= { zxAnEnvFanTrayResetObjects 3 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 8. Environment Device Objects
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvDeviceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEnvDeviceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of environment device."
|
|
::= { zxAnEnvDeviceObjects 2 }
|
|
|
|
zxAnEnvDeviceEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEnvDeviceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of the zxAnEnvDeviceTable."
|
|
INDEX { zxAnEnvDeviceId }
|
|
::= { zxAnEnvDeviceTable 1 }
|
|
|
|
ZxAnEnvDeviceEntry ::= SEQUENCE {
|
|
zxAnEnvDeviceId Integer32,
|
|
zxAnEnvDeviceName DisplayString,
|
|
zxAnEnvDeviceRowStatus RowStatus
|
|
}
|
|
|
|
zxAnEnvDeviceId OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of this environment device.
|
|
Value 1-50 is default value which can not be modified or deleted.
|
|
If add a new device, the ID will be starting from 51."
|
|
::= { zxAnEnvDeviceEntry 1 }
|
|
|
|
zxAnEnvDeviceName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the environment device."
|
|
::= { zxAnEnvDeviceEntry 2 }
|
|
|
|
zxAnEnvDeviceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
The supported actions of this conceptual row only include:
|
|
'createAndGo' and 'destroy'.
|
|
|
|
To create a row in this table, a manager must set this object to
|
|
createAndGo(4).
|
|
|
|
To delete a row in this table, a manager must set this object to
|
|
destroy(6).
|
|
|
|
To get this object, the agent always returns active(1).
|
|
"
|
|
::= { zxAnEnvDeviceEntry 50 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 9. Environment Device Switch Objects
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvDevMonSwitchTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEnvDevMonSwitchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of the switch which monitors environment device."
|
|
::= { zxAnEnvDeviceObjects 3 }
|
|
|
|
zxAnEnvDevMonSwitchEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEnvDevMonSwitchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of the zxAnEnvDevMonSwitchTable."
|
|
INDEX { zxAnEnvDevMonSwitchId }
|
|
::= { zxAnEnvDevMonSwitchTable 1 }
|
|
|
|
ZxAnEnvDevMonSwitchEntry ::= SEQUENCE {
|
|
zxAnEnvDevMonSwitchId Integer32,
|
|
zxAnEnvDevMonSwitchDeviceId Integer32,
|
|
zxAnEnvDevMonSwitchTrapEnable INTEGER,
|
|
zxAnEnvDevMonSwitchNormalStatus INTEGER,
|
|
zxAnEnvDevMonSwitchCurrStatus INTEGER
|
|
}
|
|
|
|
zxAnEnvDevMonSwitchId OBJECT-TYPE
|
|
SYNTAX Integer32(1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the switch."
|
|
::= { zxAnEnvDevMonSwitchEntry 1 }
|
|
|
|
zxAnEnvDevMonSwitchDeviceId OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the device which monitored by the switch.
|
|
Value 0 means this switch does not monitor any device."
|
|
DEFVAL { 0 }
|
|
::= { zxAnEnvDevMonSwitchEntry 2 }
|
|
|
|
zxAnEnvDevMonSwitchTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables the environment device abnormal trap."
|
|
DEFVAL { disabled }
|
|
::= { zxAnEnvDevMonSwitchEntry 3 }
|
|
|
|
zxAnEnvDevMonSwitchNormalStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lowLevel(1),
|
|
highLevel(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The normal status of the environment device."
|
|
DEFVAL { lowLevel }
|
|
::= { zxAnEnvDevMonSwitchEntry 4 }
|
|
|
|
zxAnEnvDevMonSwitchCurrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lowLevel(1),
|
|
highLevel(2),
|
|
unknown(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current status of the environment device. "
|
|
::= { zxAnEnvDevMonSwitchEntry 5 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 21. zxAnEnvMonNotifications
|
|
-------------------------------------------------------------------------------
|
|
|
|
---envTempHigh alarm
|
|
|
|
zxAnEnvHighTempAlm NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvTemp, zxAnEnvTempHighAlmThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The environment temperature has exceeded high temperature
|
|
threshold zxAnEnvTempHighAlmThreshold.
|
|
The zxAnEnvTemp object identifies the current temperature."
|
|
::= { zxAnEnvMonTempTraps 1 }
|
|
|
|
zxAnEnvHighTempClr NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvTemp, zxAnEnvTempHighAlmThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The environment temperature has returned to normal operating
|
|
temperature from zxAnEnvTempHighAlmThreshold.
|
|
The zxAnEnvTemp object identifies the current temperature."
|
|
::= { zxAnEnvMonTempTraps 2 }
|
|
|
|
zxAnEnvTempSensorFailure NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the temperature sensor is in fault."
|
|
::= { zxAnEnvMonTempTraps 5 }
|
|
|
|
zxAnEnvCriticalTempAlm NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvTemp, zxAnEnvTempCriticalAlmThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The environment temperature has exceeded critical temperature
|
|
threshold zxAnEnvTempCriticalAlmThreshold.
|
|
The zxAnEnvTemp object identifies the current temperature."
|
|
::= { zxAnEnvMonTempTraps 6 }
|
|
|
|
zxAnEnvCriticalTempClr NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvTemp, zxAnEnvTempCriticalAlmThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The environment temperature has returned to normal operating
|
|
temperature from zxAnEnvTempCriticalAlmThreshold.
|
|
The zxAnEnvTemp object identifies the current temperature."
|
|
::= { zxAnEnvMonTempTraps 7 }
|
|
|
|
zxAnEnvLowTempAlm NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvTemp, zxAnEnvTempLowAlmThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The environment temperature is below low temperature
|
|
threshold zxAnEnvTempLowAlmThreshold.
|
|
The zxAnEnvTemp object identifies the current temperature."
|
|
::= { zxAnEnvMonTempTraps 8 }
|
|
|
|
zxAnEnvLowTempClr NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvTemp, zxAnEnvTempLowAlmThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The environment temperature has returned to normal operating
|
|
temperature from zxAnEnvTempLowAlmThreshold.
|
|
The zxAnEnvTemp object identifies the current temperature."
|
|
::= { zxAnEnvMonTempTraps 9 }
|
|
|
|
zxAnEnvCardShutdownAlm NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvCardShutdownReason,
|
|
zxAnCardTemp,
|
|
zxAnEnvTemp,
|
|
zxAnEnvEmergencyBatteryVoltage,
|
|
zxAnEnvEmergencyBatteryThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvCardShutdownAlm trap is sent when the card has
|
|
been shut down because agent has detected that the temperature
|
|
is too high or the AC power is failure and the battery voltage
|
|
is lower than zxAnEnvEmergencyBatteryThreshold.
|
|
|
|
zxAnEnvCardShutdownReason indicates the real reason.
|
|
|
|
When zxAnEnvCardShutdownReason is envHighTemperature ( 1 ),
|
|
it means the environment temperature is too high,
|
|
zxAnEnvTemp is the value of current environment temperature,
|
|
zxAnCardTemp is invalid and should be zero.
|
|
zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
|
|
are invalid and should be zero.
|
|
|
|
When zxAnEnvCardShutdownReason is cardHighTemperature ( 2 ),
|
|
it means the card temperature is too high,
|
|
zxAnCardTemp is the value of current card temperature,
|
|
zxAnEnvTemp is invalid and should be zero.
|
|
zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
|
|
are invalid and should be zero.
|
|
|
|
When zxAnEnvCardShutdownReason is chipHighTemperature ( 3 ),
|
|
it means the temperature of the chip on the card is too high,
|
|
zxAnCardTemp and zxAnEnvTemp are invalid and should be zero.
|
|
zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
|
|
are invalid and should be zero.
|
|
|
|
When zxAnEnvCardShutdownReason is emergencyPowerSaving ( 4 ),
|
|
it means the AC power is failure, the emergency power saving action
|
|
has been taken, zxAnCardTemp and zxAnEnvTemp are invalid
|
|
and should be zero.
|
|
zxAnEnvEmergencyBatteryVoltage is the value of the current battery
|
|
voltage, zxAnEnvEmergencyBatteryThreshold is the threshold of the
|
|
battery voltage.
|
|
"
|
|
::= { zxAnEnvMonTempTraps 30 }
|
|
|
|
zxAnEnvCardShutdownClr NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvCardShutdownReason,
|
|
zxAnCardTemp,
|
|
zxAnEnvTemp,
|
|
zxAnEnvEmergencyBatteryVoltage,
|
|
zxAnEnvEmergencyBatteryThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvCardShutdownClr trap is sent when the card
|
|
temperature becomes normal,
|
|
or the environment temperature becomes normal,
|
|
or the chip temperature becomes normal,
|
|
or the battery voltage is higher than
|
|
zxAnEnvEmergencyBatteryThreshold or AC power becomes normal."
|
|
::= { zxAnEnvMonTempTraps 31 }
|
|
|
|
zxAnEnvTemperatureAbnormalAlm NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In temperature control mode, a zxAnEnvTemperatureAbnormalAlm trap
|
|
is sent when the environment temperature can't be read."
|
|
::= { zxAnEnvMonTempTraps 32 }
|
|
|
|
zxAnEnvTemperatureAbnormalClr NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvTemperatureAbnormalClr trap is sent when
|
|
the zxAnEnvTemperatureAbnormalAlm is cleared."
|
|
::= { zxAnEnvMonTempTraps 33 }
|
|
|
|
zxAnEnvNearCriticalTempAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnEnvTemp,
|
|
zxAnEnvTempCriticalAlmThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvNearCriticalTempAlm trap is sent when the environment
|
|
temperature is close to the environment critical temperature alarm
|
|
threshold."
|
|
::= { zxAnEnvMonTempTraps 34 }
|
|
|
|
zxAnEnvNearCriticalTempClr NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnEnvTemp,
|
|
zxAnEnvTempCriticalAlmThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvNearCriticalTempClr trap is sent when
|
|
the zxAnEnvNearCriticalTempAlm is cleared."
|
|
::= { zxAnEnvMonTempTraps 35 }
|
|
|
|
zxAnEnvCardNearCriticalTempAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnCardTemp,
|
|
zxAnCardCriticalTempAlmThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvCardNearCriticalTempAlm trap is sent when the card
|
|
temperature is close to the card critical temperature alarm
|
|
threshold."
|
|
::= { zxAnEnvMonTempTraps 36 }
|
|
|
|
zxAnEnvCardNearCriticalTempClr NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnCardTemp,
|
|
zxAnCardCriticalTempAlmThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvCardNearCriticalTempClr trap is sent when
|
|
the zxAnEnvCardNearCriticalTempAlm is cleared."
|
|
::= { zxAnEnvMonTempTraps 37 }
|
|
|
|
zxAnEnvOptNearCriticalTempAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnCardOptHighestTemp,
|
|
zxAnCardOptCriticalTempAlmThresh,
|
|
zxAnCardOptHighestTempPortNo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvOptNearCriticalTempAlm trap is sent when the optical
|
|
module temperature is close to the optical module critical
|
|
temperature alarm threshold."
|
|
::= { zxAnEnvMonTempTraps 38 }
|
|
|
|
zxAnEnvOptNearCriticalTempClr NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnCardOptHighestTemp,
|
|
zxAnCardOptCriticalTempAlmThresh,
|
|
zxAnCardOptHighestTempPortNo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvOptNearCriticalTempClr trap is sent when
|
|
the zxAnEnvOptNearCriticalTempAlm is cleared."
|
|
::= { zxAnEnvMonTempTraps 39 }
|
|
|
|
zxAnEnvHeatRadiationAbnormalAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnEnvTemp,
|
|
zxAnCardTemp,
|
|
zxAnCardHeatRadiationAlmThresh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvHeatRadiationAbnormalAlm trap is sent when the
|
|
temperature difference between the card and the environment
|
|
exceeds the zxAnCardHeatRadiationAlmThresh."
|
|
::= { zxAnEnvMonTempTraps 40 }
|
|
|
|
zxAnEnvHeatRadiationAbnormalClr NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnEnvTemp,
|
|
zxAnCardTemp,
|
|
zxAnCardHeatRadiationAlmThresh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvHeatRadiationAbnormalClr trap is sent when
|
|
the zxAnEnvHeatRadiationAbnormalAlm is cleared."
|
|
::= { zxAnEnvMonTempTraps 41 }
|
|
|
|
---interface link down alarm
|
|
|
|
zxAnEnvMonitorInterfaceLinkDown NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the agent has detected that the
|
|
link at the environment monitoring interface has been down."
|
|
::= { zxAnEnvMonInterfaceTraps 1 }
|
|
|
|
zxAnEnvMonitorInterfaceLinkUp NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the agent has detected that the
|
|
link at the environment monitoring interface has been up."
|
|
::= { zxAnEnvMonInterfaceTraps 2 }
|
|
|
|
--- Power Supply Alarm
|
|
|
|
zxAnEnvPowerSupplyModuleDown NOTIFICATION-TYPE
|
|
OBJECTS { zxAnPowerSupplyOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the power supply module is down."
|
|
::= { zxAnEnvMonPowerSupplyTraps 1 }
|
|
|
|
zxAnEnvPowerSupplyModuleUp NOTIFICATION-TYPE
|
|
OBJECTS { zxAnPowerSupplyOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the power supply module is up."
|
|
::= { zxAnEnvMonPowerSupplyTraps 2 }
|
|
|
|
zxAnEnvPowerOverVoltageAlm NOTIFICATION-TYPE
|
|
OBJECTS { zxAnPowerSupplyInVoltage, zxAnPowerInVoltageUpperThresh }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the input voltage of power supply is
|
|
over-voltage."
|
|
::= { zxAnEnvMonPowerSupplyTraps 3 }
|
|
|
|
|
|
zxAnEnvPowerOverVoltageClr NOTIFICATION-TYPE
|
|
OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageUpperThresh }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the over-voltage fault is cleared."
|
|
::= { zxAnEnvMonPowerSupplyTraps 4 }
|
|
|
|
|
|
zxAnEnvPowerUnderVoltageAlm NOTIFICATION-TYPE
|
|
OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageLowerThresh }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the input voltage of power supply is
|
|
under-voltage."
|
|
::= { zxAnEnvMonPowerSupplyTraps 5 }
|
|
|
|
|
|
zxAnEnvPowerUnderVoltageClr NOTIFICATION-TYPE
|
|
OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageLowerThresh }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the under-voltage fault is cleared."
|
|
::= { zxAnEnvMonPowerSupplyTraps 6 }
|
|
|
|
zxAnEnvPowerOff NOTIFICATION-TYPE
|
|
OBJECTS { zxAnPowerSupplyInVoltageStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the power supply is off."
|
|
::= { zxAnEnvMonPowerSupplyTraps 7 }
|
|
|
|
zxAnEnvPowerOn NOTIFICATION-TYPE
|
|
OBJECTS { zxAnPowerSupplyInVoltageStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the power supply off fault is cleared."
|
|
::= { zxAnEnvMonPowerSupplyTraps 8 }
|
|
|
|
zxAnEnvEmergencyPowerSaveAlm NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current power supply switches to storage battery,
|
|
the emergency power saving action has been taken."
|
|
::= { zxAnEnvMonPowerSupplyTraps 9 }
|
|
|
|
zxAnEnvEmergencyPowerSaveClr NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current power supply switches to normal AC power."
|
|
::= { zxAnEnvMonPowerSupplyTraps 10 }
|
|
|
|
zxAnEnvACPowerDownAlm NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvACPowerDownAlm trap is sent when the agent detects no AC
|
|
power input."
|
|
::= { zxAnEnvMonPowerSupplyTraps 11 }
|
|
|
|
zxAnEnvACPowerDownClr NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvACPowerDownClr trap is sent when the agent detects AC
|
|
power input."
|
|
::= { zxAnEnvMonPowerSupplyTraps 12 }
|
|
|
|
zxAnEnvNoBatteryAlm NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvNoBatteryAlm trap is sent when no battery found by
|
|
the agent."
|
|
::= { zxAnEnvMonPowerSupplyTraps 13 }
|
|
|
|
zxAnEnvNoBatteryClr NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvNoBatteryClr trap is sent when the battery has been found
|
|
by the agent."
|
|
::= { zxAnEnvMonPowerSupplyTraps 14 }
|
|
|
|
zxAnEnvBatteryUnderVoltageAlm NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvBatteryUnderVoltageAlm trap is sent when the battery
|
|
voltage is under-voltage."
|
|
::= { zxAnEnvMonPowerSupplyTraps 15 }
|
|
|
|
zxAnEnvBatteryUnderVoltageClr NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvBatteryUnderVoltageClr trap is sent when the battery
|
|
voltage becomes normal."
|
|
::= { zxAnEnvMonPowerSupplyTraps 16 }
|
|
|
|
|
|
--- Fan Alarm
|
|
|
|
zxAnEnvFanLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvFanOnlineStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the agent has detected that fan is offline."
|
|
::= { zxAnEnvMonFanTraps 1 }
|
|
|
|
zxAnEnvFanLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvFanOnlineStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the agent has detected that fan is online."
|
|
::= { zxAnEnvMonFanTraps 2 }
|
|
|
|
|
|
zxAnEnvFanTrayLinkDown NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the agent has detected that the
|
|
link at the fan card interface has been down."
|
|
::= { zxAnEnvMonFanTraps 3 }
|
|
|
|
|
|
zxAnEnvFanTrayLinkUp NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the agent has detected that the
|
|
link at the fan card interface has been up."
|
|
::= { zxAnEnvMonFanTraps 4 }
|
|
|
|
zxAnEnvFanFailureAlm NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvFanOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the fan is in fault."
|
|
::= { zxAnEnvMonFanTraps 5 }
|
|
|
|
zxAnEnvFanFailureClr NOTIFICATION-TYPE
|
|
OBJECTS { zxAnEnvFanOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates that the fan's fault is cleared."
|
|
::= { zxAnEnvMonFanTraps 6 }
|
|
|
|
zxAnEnvDeviceAbnormalAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnEnvDevMonSwitchDeviceId,
|
|
zxAnEnvDevMonSwitchNormalStatus,
|
|
zxAnEnvDevMonSwitchCurrStatus,
|
|
zxAnEnvDeviceName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvDeviceAbnormalAlm trap is sent when the current status
|
|
of environment device is inconsistent with normal status."
|
|
::= { zxAnEnvDeviceTraps 1 }
|
|
|
|
zxAnEnvDeviceAbnormalClr NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
zxAnEnvDevMonSwitchDeviceId,
|
|
zxAnEnvDevMonSwitchNormalStatus,
|
|
zxAnEnvDevMonSwitchCurrStatus,
|
|
zxAnEnvDeviceName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnEnvDeviceAbnormalClr trap is sent when current status
|
|
of environment device is consistent with normal status."
|
|
::= { zxAnEnvDeviceTraps 2 }
|
|
-------------------------------------------------------------------------------
|
|
-- 31. zxAnEnvMonConformance
|
|
-------------------------------------------------------------------------------
|
|
zxAnEnvMonConformance OBJECT IDENTIFIER ::= { zxAnEnvMonMib 4 }
|
|
|
|
zxAnEnvMonCompliances OBJECT IDENTIFIER ::= { zxAnEnvMonConformance 1 }
|
|
zxAnEnvMonGroups OBJECT IDENTIFIER ::= { zxAnEnvMonConformance 2 }
|
|
|
|
zxAnEnvMonCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement the
|
|
ZTE-AN-ENVMON-MIB."
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS {
|
|
zxAnEnvMonCapabilitiesGroup,
|
|
zxAnEnvTempGroup,
|
|
zxAnEnvCardTempGroup,
|
|
zxAnEnvInterfaceGroup,
|
|
zxAnEnvPowerSupplyGroup,
|
|
zxAnEnvFanTrayTableGroup,
|
|
zxAnEnvFanTableGroup,
|
|
zxAnEnvMonNotificationsGroup
|
|
}
|
|
::= { zxAnEnvMonCompliances 1 }
|
|
|
|
zxAnEnvMonCapabilitiesGroup OBJECT-GROUP
|
|
OBJECTS { zxAnEnvMonCapabilities
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent environment
|
|
management capabilities of this equipment. The bit value 1 means
|
|
the function represented by this bit is supported by this
|
|
equipment."
|
|
::= { zxAnEnvMonGroups 1 }
|
|
|
|
zxAnEnvTempGroup OBJECT-GROUP
|
|
OBJECTS { zxAnEnvTemp,
|
|
zxAnEnvTempHighAlmThreshold,
|
|
zxAnEnvTempCriticalAlmThreshold,
|
|
zxAnEnvTempLowAlmThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent the
|
|
temperature information of this equipment/card and to set the
|
|
temperature alarm threshold of the environment/card."
|
|
::= { zxAnEnvMonGroups 2 }
|
|
|
|
zxAnEnvCardTempGroup OBJECT-GROUP
|
|
OBJECTS { zxAnCardTemp,
|
|
zxAnCardEnvHis15MinTemp,
|
|
zxAnCardEnvHis1DayTemp,
|
|
zxAnCardEnvRiseAlmThresh,
|
|
zxAnCardEnvClrRiseAlmThresh,
|
|
zxAnCardEnvRiseWarnThresh,
|
|
zxAnCardEnvClrRiseWarnThresh,
|
|
zxAnCardEnvFallWarnThresh,
|
|
zxAnCardEnvClrFallWarnThresh,
|
|
zxAnCardEnvFallAlmThresh,
|
|
zxAnCardEnvClrFallAlmThresh,
|
|
zxAnCardEnvAlmPrfConfRowStatus,
|
|
zxAnCardEnvAlmPrf,
|
|
zxAnCardEnvAlmPrfApplyRowStatus,
|
|
zxAnCardEnvAlmPrfRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent temperature
|
|
performance of the card environment."
|
|
::= { zxAnEnvMonGroups 3 }
|
|
|
|
zxAnEnvInterfaceGroup OBJECT-GROUP
|
|
OBJECTS { zxAnEnvMonInterfaceUsage,
|
|
zxAnEnvEpmConnectPort,
|
|
zxAnEnvBackplaneInterfaceUsage
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent the
|
|
interface connection of the equipment."
|
|
::= { zxAnEnvMonGroups 4 }
|
|
|
|
zxAnEnvPowerSupplyGroup OBJECT-GROUP
|
|
OBJECTS { zxAnPowerSupplyMaxPowerNum,
|
|
zxAnPowerSupplyOperStatus,
|
|
zxAnPowerSupplyInVoltage,
|
|
zxAnPowerSupplyInVoltageStatus,
|
|
zxAnPowerInVoltageUpperThresh,
|
|
zxAnPowerInVoltageLowerThresh,
|
|
zxAnPowerSupplyInCurrent,
|
|
zxAnPowerInCurrentThresh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to provide power
|
|
management functions, include power count and the voltage status
|
|
of the power supply."
|
|
::= { zxAnEnvMonGroups 5 }
|
|
|
|
zxAnEnvFanTrayTableGroup OBJECT-GROUP
|
|
OBJECTS { zxAnFanTrayAlarmBeepEnable,
|
|
zxAnFanTrayAutoSwitchByCardUp,
|
|
zxAnFanTrayHardwareVersion,
|
|
zxAnFanTraySoftwareVersion,
|
|
zxAnFanTraySpeedCtrlMode,
|
|
zxAnFanTrayLowSpeed,
|
|
zxAnFanTrayStdSpeed,
|
|
zxAnFanTrayHighSpeed,
|
|
zxAnFanTraySuperSpeed,
|
|
zxAnFanTrayLowSpeedShiftTemp,
|
|
zxAnFanTrayStdSpeedShiftTemp,
|
|
zxAnFanTrayHighSpeedShiftTemp,
|
|
zxAnFanTraySuperSpeedShiftTemp,
|
|
zxAnFanTrayLowSpeedPercent,
|
|
zxAnFanTrayStdSpeedPercent,
|
|
zxAnFanTrayHighSpeedPercent,
|
|
zxAnFanTraySuperSpeedPercent,
|
|
zxAnFanTraySn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to provide fan management
|
|
functions, include setting the speed control mode and the
|
|
percentage of speed of the different speed level of the fan."
|
|
::= { zxAnEnvMonGroups 6 }
|
|
|
|
zxAnEnvFanTableGroup OBJECT-GROUP
|
|
OBJECTS { zxAnEnvFanConfSpeedLevel,
|
|
zxAnEnvFanActualSpeedLevel,
|
|
zxAnEnvFanAdminStatus,
|
|
zxAnEnvFanOperStatus,
|
|
zxAnEnvFanOnlineStatus,
|
|
zxAnEnvFanActualSpeed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to provide the speed
|
|
information and operational status of the fan."
|
|
::= { zxAnEnvMonGroups 7 }
|
|
|
|
zxAnEnvMonNotificationsGroup OBJECT-GROUP
|
|
OBJECTS { zxAnEnvHighTempAlm,
|
|
zxAnEnvHighTempClr,
|
|
zxAnEnvMonitorInterfaceLinkDown,
|
|
zxAnEnvMonitorInterfaceLinkUp,
|
|
zxAnEnvFanLinkDown,
|
|
zxAnEnvFanLinkUp,
|
|
zxAnEnvTempSensorFailure,
|
|
zxAnEnvFanFailureAlm,
|
|
zxAnEnvFanFailureClr,
|
|
zxAnEnvPowerSupplyModuleDown,
|
|
zxAnEnvPowerSupplyModuleUp,
|
|
zxAnEnvFanTrayLinkDown,
|
|
zxAnEnvFanTrayLinkUp,
|
|
zxAnEnvPowerOverVoltageAlm,
|
|
zxAnEnvPowerOverVoltageClr,
|
|
zxAnEnvPowerUnderVoltageAlm,
|
|
zxAnEnvPowerUnderVoltageClr,
|
|
zxAnEnvPowerOff,
|
|
zxAnEnvPowerOn,
|
|
zxAnEnvACPowerDownAlm,
|
|
zxAnEnvACPowerDownClr,
|
|
zxAnEnvNoBatteryAlm,
|
|
zxAnEnvNoBatteryClr,
|
|
zxAnEnvBatteryUnderVoltageAlm,
|
|
zxAnEnvBatteryUnderVoltageClr,
|
|
zxAnEnvCardShutdownAlm,
|
|
zxAnEnvCardShutdownClr,
|
|
zxAnEnvCriticalTempAlm,
|
|
zxAnEnvCriticalTempClr,
|
|
zxAnEnvLowTempAlm,
|
|
zxAnEnvLowTempClr,
|
|
zxAnEnvOptNearCriticalTempAlm,
|
|
zxAnEnvOptNearCriticalTempClr,
|
|
zxAnEnvHeatRadiationAbnormalAlm,
|
|
zxAnEnvHeatRadiationAbnormalClr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notifications which indicate specific changes, include
|
|
temperature, fan status, power status and gpon card status."
|
|
::= { zxAnEnvMonGroups 8 }
|
|
|
|
END
|