Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
3648 lines
110 KiB
Text
3648 lines
110 KiB
Text
--ESI-MIB { iso org(3) dod(6) internet(1) private(4) enterprises(1) esi(683) }
|
|
--Extended Systems MIB.
|
|
|
|
--Revision 2.2, July 12, 1999
|
|
|
|
--(C) Copyright 1995, Extended Systems, Inc.
|
|
|
|
|
|
--ESI-MIB { iso org(3) dod(6) internet(1) private(4) enterprises(1) 683 }
|
|
|
|
|
|
ESI-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, OBJECT-TYPE, NetworkAddress,
|
|
IpAddress, Counter FROM RFC1155-SMI
|
|
DisplayString FROM RFC1213-MIB
|
|
TRAP-TYPE FROM RFC-1215;
|
|
|
|
esi OBJECT IDENTIFIER ::= { enterprises 683 }
|
|
general OBJECT IDENTIFIER ::= { esi 1 }
|
|
commands OBJECT IDENTIFIER ::= { esi 2 }
|
|
esiSNMP OBJECT IDENTIFIER ::= { esi 3 }
|
|
esiSNMPCommands OBJECT IDENTIFIER ::= { esiSNMP 2 }
|
|
driver OBJECT IDENTIFIER ::= { esi 4 }
|
|
tokenRing OBJECT IDENTIFIER ::= { esi 5 }
|
|
printServers OBJECT IDENTIFIER ::= { esi 6 }
|
|
psGeneral OBJECT IDENTIFIER ::= { printServers 1 }
|
|
psOutput OBJECT IDENTIFIER ::= { printServers 2 }
|
|
psProtocols OBJECT IDENTIFIER ::= { printServers 3 }
|
|
genProtocols OBJECT IDENTIFIER ::= { general 15 }
|
|
outputCommands OBJECT IDENTIFIER ::= { psOutput 2 }
|
|
outputConfigure OBJECT IDENTIFIER ::= { psOutput 3 }
|
|
outputJobLog OBJECT IDENTIFIER ::= { psOutput 6 }
|
|
trCommands OBJECT IDENTIFIER ::= { tokenRing 2 }
|
|
trConfigure OBJECT IDENTIFIER ::= { tokenRing 3 }
|
|
tcpip OBJECT IDENTIFIER ::= { psProtocols 1 }
|
|
netware OBJECT IDENTIFIER ::= { psProtocols 2 }
|
|
vines OBJECT IDENTIFIER ::= { psProtocols 3 }
|
|
lanManager OBJECT IDENTIFIER ::= { psProtocols 4 }
|
|
eTalk OBJECT IDENTIFIER ::= { psProtocols 5 }
|
|
tcpipCommands OBJECT IDENTIFIER ::= { tcpip 3 }
|
|
tcpipConfigure OBJECT IDENTIFIER ::= { tcpip 4 }
|
|
tcpipStatus OBJECT IDENTIFIER ::= { tcpip 5 }
|
|
nwCommands OBJECT IDENTIFIER ::= { netware 3 }
|
|
nwConfigure OBJECT IDENTIFIER ::= { netware 4 }
|
|
nwStatus OBJECT IDENTIFIER ::= { netware 5 }
|
|
bvCommands OBJECT IDENTIFIER ::= { vines 3 }
|
|
bvConfigure OBJECT IDENTIFIER ::= { vines 4 }
|
|
bvStatus OBJECT IDENTIFIER ::= { vines 5 }
|
|
eTalkCommands OBJECT IDENTIFIER ::= { eTalk 3 }
|
|
eTalkConfigure OBJECT IDENTIFIER ::= { eTalk 4 }
|
|
eTalkStatus OBJECT IDENTIFIER ::= { eTalk 5 }
|
|
|
|
-- object types
|
|
|
|
-- the general group
|
|
|
|
genGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the general group."
|
|
::= { general 1 }
|
|
|
|
genMIBVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version of the MIB."
|
|
::= { general 2 }
|
|
|
|
genProductName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual description of the device."
|
|
::= { general 3 }
|
|
|
|
genProductNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..5))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The product number of the device."
|
|
::= { general 4 }
|
|
|
|
genSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..7))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The serial number of the device."
|
|
::= { general 5 }
|
|
|
|
genHWAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The device's hardware address."
|
|
::= { general 6 }
|
|
|
|
genCableType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenbase2(1),
|
|
tenbaseT(2),
|
|
aui(3),
|
|
utp(4),
|
|
stp(5),
|
|
fiber100fx(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the network cable type connected to the
|
|
device."
|
|
::= { general 7 }
|
|
|
|
genDateCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The device's datecode."
|
|
::= { general 8 }
|
|
|
|
genVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string indicating the version of the firmware."
|
|
::= { general 9 }
|
|
|
|
genConfigurationDirty OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A variable's value has been changed which will
|
|
require that the device be reset or power cycled
|
|
before it will take effect.
|
|
Set cmdReset to take this action.
|
|
|
|
A list of critical variables that will cause
|
|
genConfigurationDirty to be set follows:
|
|
|
|
snmpGetCommunityName,
|
|
snmpSetCommunityName,
|
|
|
|
trPriority,
|
|
trEarlyTokenRelease,
|
|
trPacketSize,
|
|
trRouting,
|
|
trLocallyAdminAddr,
|
|
|
|
psJetAdminEnabled,
|
|
|
|
outputType,
|
|
outputHandshake,
|
|
|
|
tcpipEnabled,
|
|
tcpipIPAddress,
|
|
tcpipDefaultGateway,
|
|
tcpipSubnetMask,
|
|
tcpipUsingNetProtocols,
|
|
tcpipBootProtocolsEnabled,
|
|
tcpipRawPortNumber,
|
|
tcpipMLPTCPPort,
|
|
tcpipMLPPort,
|
|
|
|
nwEnabled,
|
|
nwSetFrameFormat,
|
|
nwMode,
|
|
nwPrintServerName,
|
|
nwPrintServerPassword,
|
|
nwQueueScanTime,
|
|
nwFileServerName,
|
|
nwPortPrinterNumber,
|
|
nwPortFontDownload,
|
|
nwPortPCLQueue,
|
|
nwPortPSQueue,
|
|
nwPortFormsOn,
|
|
nwPortNotification,
|
|
|
|
bvEnabled,
|
|
bvSetSequencedRouting,
|
|
bvLoginName,
|
|
bvLoginPassword,
|
|
bvPrintServiceName,
|
|
bvPrintServiceRouting,
|
|
|
|
lmEnabled,
|
|
|
|
eTalkEnabled"
|
|
::= { general 10 }
|
|
|
|
genCompanyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string indicating the manufacturer of the device."
|
|
::= { general 11 }
|
|
|
|
genCompanyLoc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string indicating the location of the manufacturer
|
|
of the device."
|
|
::= { general 12 }
|
|
|
|
genCompanyPhone OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string indicating the phone number of the
|
|
manufacturer of the device."
|
|
::= { general 13 }
|
|
|
|
genCompanyTechSupport OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string indicating the technical support information
|
|
for the device."
|
|
::= { general 14 }
|
|
|
|
genNumProtocols OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of network protocols supported on the
|
|
device."
|
|
::= { genProtocols 1 }
|
|
|
|
genProtocolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GenProtocolEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of network protocols. The number of
|
|
entries is given by the value of genNumProtocols."
|
|
::= { genProtocols 2 }
|
|
|
|
genProtocolEntry OBJECT-TYPE
|
|
SYNTAX GenProtocolEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A network protocol supported on the device."
|
|
INDEX { genProtocolIndex }
|
|
::= { genProtocolTable 1 }
|
|
|
|
GenProtocolEntry ::=
|
|
SEQUENCE {
|
|
genProtocolIndex
|
|
INTEGER,
|
|
genProtocolDescr
|
|
DisplayString,
|
|
genProtocolID
|
|
INTEGER
|
|
}
|
|
|
|
genProtocolIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each network protocol. Its
|
|
value ranges between 1 and the value of
|
|
genNumProtocols. The value for each protocol must
|
|
remain constant at least from one re-initialization
|
|
of the entity's network management system to the next
|
|
re-initialization."
|
|
::= { genProtocolEntry 1 }
|
|
|
|
genProtocolDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual string describing the network protocol."
|
|
::= { genProtocolEntry 2 }
|
|
|
|
genProtocolID OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcp-ip(1),
|
|
netware(2),
|
|
vines(3),
|
|
lanmanger(4),
|
|
ethertalk(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique identification number for the network
|
|
protocol."
|
|
::= { genProtocolEntry 3 }
|
|
|
|
genSysUpTimeString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..35))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string indicating the system up time for the device."
|
|
::= { general 16 }
|
|
|
|
-- the commands group
|
|
|
|
cmdGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the commands group."
|
|
::= { commands 1 }
|
|
|
|
cmdReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will reset the device. The following
|
|
list of variables will also cause the device to reset
|
|
itself.
|
|
|
|
cmdRestoreDefaults,
|
|
snmpRestoreDefaults,
|
|
trRestoreDefaults,
|
|
outputRestoreDefaults,
|
|
tcpipRestoreDefaults,
|
|
tcpipFirmwareUpgrade,
|
|
nwRestoreDefaults,
|
|
nwFirmwareUpgrade,
|
|
bvRestoreDefaults,
|
|
bvFirmwareUpgrade,
|
|
eTalkRestoreDefaults"
|
|
::= { commands 2 }
|
|
|
|
cmdPrintConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will cause the device to print a
|
|
configuration page."
|
|
::= { commands 3 }
|
|
|
|
cmdRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will restore all parameters on the device
|
|
to factory defaults, as well as reset the device."
|
|
::= { commands 4 }
|
|
|
|
-- the esiSNMP group
|
|
|
|
snmpGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the snmp group."
|
|
::= { esiSNMP 1 }
|
|
|
|
snmpRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will restore all SNMP parameters
|
|
on the device to factory defaults, as well as reset
|
|
the device."
|
|
::= { esiSNMPCommands 1 }
|
|
|
|
snmpGetCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Get community name for the managed node.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { esiSNMP 3 }
|
|
|
|
snmpSetCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Set community name for the managed node. This value
|
|
cannot be read, just set.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { esiSNMP 4 }
|
|
|
|
snmpTrapCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Trap community name for the managed node."
|
|
::= { esiSNMP 5 }
|
|
|
|
-- the driver group
|
|
|
|
driverGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the driver group."
|
|
::= { driver 1 }
|
|
|
|
driverRXPackets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received."
|
|
::= { driver 2 }
|
|
|
|
driverTXPackets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets transmitted."
|
|
::= { driver 3 }
|
|
|
|
driverRXPacketsUnavailable OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol due to a lack of buffer space."
|
|
::= { driver 4 }
|
|
|
|
driverRXPacketErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of inbound packets that contained
|
|
errors preventing them from being deliverable to a
|
|
higher-layer protocol."
|
|
::= { driver 5 }
|
|
|
|
driverTXPacketErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of outbound packets that could not be
|
|
transmitted because of errors."
|
|
::= { driver 6 }
|
|
|
|
driverTXPacketRetries OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of retransmitted packets."
|
|
::= { driver 7 }
|
|
|
|
driverChecksumErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets containing checksum errors
|
|
received."
|
|
::= { driver 8 }
|
|
|
|
-- the tokenRing group
|
|
|
|
trGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the tokenRing group."
|
|
::= { tokenRing 1 }
|
|
|
|
trRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will restore all token-ring parameters
|
|
on the device to factory defaults, as well as reset
|
|
the device."
|
|
::= { trCommands 1 }
|
|
|
|
trPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..6)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The token which is passed around the ring until a
|
|
station needs it can be assigned a priority from 0 to
|
|
6. Priority 0 is the lowest and 6 is the highest. The
|
|
priority of the device can be increased to improve
|
|
performance. However, the performance of file servers
|
|
and crucial stations could be affected.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the device must be reset. See cmdReset to do this."
|
|
::= { trConfigure 1 }
|
|
|
|
trEarlyTokenRelease OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Early token release allows the device to release the
|
|
token immediately after transmitting data but only on
|
|
16 Mbps systems. This feature enhances ring performance.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the device must be reset. See cmdReset to do this."
|
|
::= { trConfigure 2 }
|
|
|
|
trPacketSize OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
one-k(1),
|
|
two-k(2),
|
|
four-k(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"You should only change the packet size if you are
|
|
using a driver for your Token Ring adapter which
|
|
allows packet sizes greater than One_K.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the device must be reset. See cmdReset to do this."
|
|
::= { trConfigure 3 }
|
|
|
|
trRouting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
all-None(2),
|
|
single-All(3),
|
|
single-None(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Set this variable to change the source routing
|
|
configuration on the device.
|
|
|
|
Off: No source routing.
|
|
|
|
All, None: All-routes broadcast, nonbroadcast return.
|
|
The frame will be transmitted on every route within
|
|
the network resulting in multiple copies on a given ring.
|
|
|
|
Single, All: Single-route broadcast, all routes
|
|
broadcast return. The frame will be transmitted across
|
|
the designated bridges, which will result in the frame
|
|
appearing only once on each ring. The response frame
|
|
is on all routes broadcast to the originator.
|
|
|
|
Single, None: Single-route broadcast, nonbroadcast
|
|
return. The frame will be transmitted across designated
|
|
bridges, which will result in the frame appearing only
|
|
once each ring.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the device must be reset. See cmdReset to do this."
|
|
::= { trConfigure 4 }
|
|
|
|
trLocallyAdminAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the locally administered node address for the
|
|
device. Valid values are 000000000000 and between
|
|
400000000000 and 7FFFFFFFFFFF. A value of 000000000000
|
|
indicates that a locally administered address is not in
|
|
use."
|
|
::= { trConfigure 5 }
|
|
|
|
-- the psGeneral group
|
|
|
|
psGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the psGeneral group."
|
|
::= { psGeneral 1 }
|
|
|
|
psJetAdminEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether or not the JetAdmin support is
|
|
enabled on the print server.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { psGeneral 2 }
|
|
|
|
psVerifyConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
getvalue(0),
|
|
serial-configuration(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This variable is used to force the print server to verify valid configuration
|
|
settings. Setting the variable to the appropriate enumeration will cause the
|
|
print server to verify the settings for that enumeration. If the settings are
|
|
valid, the result of the set will be OK. If the settings are not valid, the
|
|
result will be BadValue. Gets on this variable will always return 0.
|
|
|
|
1 - Indicates whether or not the current serial configuration is
|
|
valid.
|
|
Valid configurations - If the serial port is set in bidirectional mode,
|
|
the baud rate must be less than 115200 and the handshaking must be set to
|
|
hardware handshaking.
|
|
|
|
2 - Not used yet.
|
|
"
|
|
::= { psGeneral 3 }
|
|
|
|
-- the psOutput group
|
|
|
|
outputGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the output group."
|
|
::= { psOutput 1 }
|
|
|
|
outputRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value of 2 will restore all output parameters on
|
|
the print server to factory defaults, as well as reset
|
|
the print server."
|
|
::= { outputCommands 1 }
|
|
|
|
outputCommandsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OutputCommandsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of physical output ports. The number of
|
|
entries is given by the value of outputNumPorts."
|
|
::= { outputCommands 2 }
|
|
|
|
outputCommandsEntry OBJECT-TYPE
|
|
SYNTAX OutputCommandsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A physical output port on the print server."
|
|
INDEX { outputIndex }
|
|
::= { outputCommandsTable 1 }
|
|
|
|
OutputCommandsEntry ::=
|
|
SEQUENCE {
|
|
outputCancelCurrentJob
|
|
INTEGER
|
|
}
|
|
|
|
outputCancelCurrentJob OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will cancel the job currently printing
|
|
on that port."
|
|
::= { outputCommandsEntry 1 }
|
|
|
|
outputNumPorts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of physical output ports on the print
|
|
server."
|
|
::= { outputConfigure 1 }
|
|
|
|
outputTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OutputEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of physical output ports. The number of
|
|
entries is given by the value of outputNumPorts."
|
|
::= { outputConfigure 2 }
|
|
|
|
outputEntry OBJECT-TYPE
|
|
SYNTAX OutputEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A physical output port on the print server."
|
|
INDEX { outputIndex }
|
|
::= { outputTable 1 }
|
|
|
|
OutputEntry ::=
|
|
SEQUENCE {
|
|
outputIndex
|
|
INTEGER,
|
|
outputName
|
|
DisplayString,
|
|
outputStatusString
|
|
DisplayString,
|
|
outputStatus
|
|
INTEGER,
|
|
outputExtendedStatus
|
|
INTEGER,
|
|
outputPrinter
|
|
INTEGER,
|
|
outputLanguageSwitching
|
|
INTEGER,
|
|
outputConfigLanguage
|
|
INTEGER,
|
|
outputPCLString
|
|
OCTET STRING,
|
|
outputPSString
|
|
OCTET STRING,
|
|
outputCascaded
|
|
INTEGER,
|
|
outputSetting
|
|
INTEGER,
|
|
outputOwner
|
|
INTEGER,
|
|
outputBIDIStatusEnabled
|
|
INTEGER,
|
|
outputPrinterModel
|
|
DisplayString,
|
|
outputPrinterDisplay
|
|
DisplayString,
|
|
outputCapabilities
|
|
INTEGER,
|
|
outputHandshake
|
|
INTEGER,
|
|
outputDataBits
|
|
INTEGER,
|
|
outputStopBits
|
|
INTEGER,
|
|
outputParity
|
|
INTEGER,
|
|
outputBaudRate
|
|
INTEGER,
|
|
outputProtocolManager
|
|
INTEGER
|
|
}
|
|
|
|
outputIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each physical output port.
|
|
Its value ranges between 1 and the value of
|
|
outputNumPorts. The value for each protocol must
|
|
remain constant at least from one re-initialization
|
|
of the entity's network management system to the next
|
|
re-initialization."
|
|
::= { outputEntry 1 }
|
|
|
|
outputName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual description of the output port."
|
|
::= { outputEntry 2 }
|
|
|
|
outputStatusString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string indicating the status of the physical
|
|
output port."
|
|
::= { outputEntry 3 }
|
|
|
|
outputStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on-Line(1),
|
|
off-Line(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates status of the printer. Get
|
|
outputExtendedStatus for further information."
|
|
::= { outputEntry 4 }
|
|
|
|
outputExtendedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
no-Printer-Attached(2),
|
|
toner-Low(3),
|
|
paper-Out(4),
|
|
paper-Jam(5),
|
|
door-Open(6),
|
|
printer-Error(15)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates printer status to be used in conjunction with
|
|
outputStatus."
|
|
::= { outputEntry 5 }
|
|
|
|
outputPrinter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hp-III(1),
|
|
hp-IIISi(2),
|
|
ibm(3),
|
|
no-Specific-Printer(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The type of printer the output port is attached to.
|
|
|
|
Even if the group is supported, this variable may not
|
|
be supported."
|
|
::= { outputEntry 6 }
|
|
|
|
outputLanguageSwitching OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
pcl(2),
|
|
postScript(3),
|
|
als(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the language switching option for the physical
|
|
port.
|
|
|
|
Even if the group is supported, this variable may not be
|
|
supported."
|
|
::= { outputEntry 7 }
|
|
|
|
outputConfigLanguage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
text(1),
|
|
pcl(2),
|
|
postScript(3),
|
|
off(4),
|
|
epl-zpl(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the language that configuration pages will be
|
|
printed in.
|
|
|
|
If set to off, a config sheet will not be printed on this
|
|
port."
|
|
::= { outputEntry 8 }
|
|
|
|
outputPCLString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (127))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This string will be sent out the physical port if
|
|
(1) outputLanguageSwitching is set to PCL or
|
|
outputLanguageSwitching is set to Auto and the job is
|
|
determined to be PCL, and (2) outputPrinter is set to
|
|
No_Specific_Printer.
|
|
|
|
Even if the group is supported, this variable may not be
|
|
supported."
|
|
::= { outputEntry 9 }
|
|
|
|
outputPSString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (127))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This string will be sent out the physical port if
|
|
(1) outputLanguageSwitching is set to PostScript or
|
|
outputLanguageSwitching is set to Auto and the job is
|
|
determined to be PostScript, and (2) outputPrinter is
|
|
set to No_Specific_Printer.
|
|
|
|
Even if the group is supported, this variable may not be
|
|
supported."
|
|
::= { outputEntry 10 }
|
|
|
|
outputCascaded OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 indicates that the physical output port is
|
|
connected to an Extended System's printer sharing device.
|
|
|
|
Even if the group is supported, this variable may not be
|
|
supported."
|
|
::= { outputEntry 11 }
|
|
|
|
outputSetting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
serial-infrared(32758),
|
|
serial-bidirectional(32759),
|
|
serial-unidirectional(32760),
|
|
serial-input(32761),
|
|
parallel-compatibility-no-bidi(32762),
|
|
ieee-1284-std-nibble-mode(32763),
|
|
z-Link(32764),
|
|
internal(32765),
|
|
ieee-1284-ecp-or-fast-nibble-mode(32766),
|
|
extendedLink(32767)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the type (and optionally speed) for the
|
|
physical output port. Setting this variable to physical
|
|
connections (such as Parallel) will result in an error.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { outputEntry 12 }
|
|
|
|
outputOwner OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no-Owner(1),
|
|
tcpip(2),
|
|
netware(3),
|
|
vines(4),
|
|
lanManager(5),
|
|
etherTalk(6),
|
|
config-Page(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates which protocol or task currently is printing on
|
|
the port."
|
|
::= { outputEntry 13 }
|
|
|
|
outputBIDIStatusEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 indicates that the BIDI status system is
|
|
enabled."
|
|
::= { outputEntry 14 }
|
|
|
|
outputPrinterModel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..60))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A string indicating the printer model attached to the output port."
|
|
::= { outputEntry 15 }
|
|
|
|
outputPrinterDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A string indicating the message on the attached printer front panel."
|
|
::= { outputEntry 16 }
|
|
|
|
outputCapabilities OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
serial-Uni-Baud-9600(1),
|
|
serial-Uni-Baud-19200(2),
|
|
serial-Uni-Baud-38400(4),
|
|
serial-Uni-Baud-57600(8),
|
|
serial-Uni-Baud-115200(16),
|
|
serial-bidi-Baud-9600(32),
|
|
serial-bidi-Baud-19200(64),
|
|
serial-bidi-Baud-38400(128),
|
|
serial-bidi-Baud-57600(256),
|
|
zpl-epl-capable(262144),
|
|
serial-irin(524288),
|
|
serial-in(1048576),
|
|
serial-config-settings(2097152),
|
|
parallel-compatibility-no-bidi(4194304),
|
|
ieee-1284-std-nibble-mode(8388608),
|
|
z-link(16777216),
|
|
bidirectional(33554432),
|
|
serial-Software-Handshake(67108864),
|
|
serial-Output(134217728),
|
|
extendedLink(268435456),
|
|
internal(536870912),
|
|
ieee-1284-ecp-or-fast-nibble-mode(1073741824)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field is implemented as a BIT mask. If the bit is set then
|
|
the port is capable of functioning in this mode.
|
|
|
|
Bit Property
|
|
--- ------------------------
|
|
0 Serial Unidirectional Baud 9600
|
|
1 Serial Unidirectional Baud 19200
|
|
2 Serial Unidirectional Baud 38400
|
|
3 Serial Unidirectional Baud 57600
|
|
4 Serial Unidirectional Baud 115200
|
|
5 Serial Bidirectional Baud 9600
|
|
6 Serial Bidirectional Baud 19200
|
|
7 Serial Bidirectional Baud 38400
|
|
8 Serial Bidirectional Baud 57600
|
|
19 Infrared Input on serial port
|
|
20 Serial Input
|
|
21 Serial Configuration Settings
|
|
22 Parallel Compatibility Mode (no bidi)
|
|
23 IEEE 1284 Standard Nibble Mode
|
|
24 ZLink
|
|
25 Bidirectional Support (PJL status)
|
|
26 Serial Software Handshaking
|
|
27 Serial Output
|
|
28 Extended Link Technology
|
|
29 Printer Internal (MIO)
|
|
30 IEEE 1284 ECP or Fast Nibble Mode"
|
|
::= { outputEntry 17 }
|
|
|
|
outputHandshake OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-Supported(1),
|
|
hardware-Software(2),
|
|
hardware(3),
|
|
software(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If the port in serial mode operation this indicates the
|
|
handshaking method being used. Setting this value to 'not-
|
|
supported' will result in an error. Setting this value on
|
|
non serial capable ports will result in an error.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { outputEntry 18 }
|
|
|
|
outputDataBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
seven-bits(7),
|
|
eight-bits(8),
|
|
not-Supported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If the port in serial mode operation this indicates the
|
|
number of data bits being used. Setting this value to 'not-
|
|
supported' will result in an error. Setting this value on
|
|
non serial capable ports will result in an error.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { outputEntry 19 }
|
|
|
|
outputStopBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
one-bit(1),
|
|
two-bits(2),
|
|
not-Supported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If the port in serial mode operation this indicates the
|
|
number of stop bits being used. Setting this value to 'not-
|
|
supported' will result in an error. Setting this value on
|
|
non serial capable ports will result in an error.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { outputEntry 20 }
|
|
|
|
outputParity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
odd(2),
|
|
even(3),
|
|
not-Supported(255)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If the port in serial mode operation this indicates the
|
|
parity checking method being used. Setting this value to 'not-
|
|
supported' will result in an error. Setting this value on
|
|
non serial capable ports will result in an error.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { outputEntry 21 }
|
|
|
|
outputBaudRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unidirectional-9600(1),
|
|
unidirectional-19200(2),
|
|
unidirectional-38400(3),
|
|
unidirectional-57600(4),
|
|
unidirectional-115200(5),
|
|
bidirectional-9600(6),
|
|
bidirectional-19200(7),
|
|
bidirectional-38400(8),
|
|
bidirectional-57600(9)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If the port in serial mode operation this indicates the
|
|
baud rate being used. Setting this value on
|
|
non serial capable ports will result in an error.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { outputEntry 22 }
|
|
|
|
outputProtocolManager OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
protocol-none(0),
|
|
protocol-compatibility(1),
|
|
protocol-1284-4(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
" Indicates the type of output protocol manager being used on the
|
|
port. Protocol-none means either there is no printer attached or
|
|
the print server has not yet determined which output managers are
|
|
supported on the printer. Protocol-compatibility means the printer
|
|
does not support any of the protocol managers supported by the print
|
|
server. Protocol-1284-4 means the output is using the 1284.4 logical
|
|
port protocol manager.
|
|
"
|
|
::= { outputEntry 23 }
|
|
|
|
outputDisplayMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bit mask describing what should be displayed by the utilities
|
|
|
|
bit Description
|
|
--- -----------
|
|
0 outputCancelCurrentJob (Includes all CancelCurrentJob info)
|
|
1 outputName
|
|
2 outputStatusString
|
|
3 outputStatus
|
|
4 outputExtendedStatus
|
|
5 outputPrinter
|
|
6 outputLanguageSwitching
|
|
7 outputConfigLanguage
|
|
8 outputString (Includes outputPCLString and outputPSString)
|
|
9 outputCascaded
|
|
10 outputSetting
|
|
11 outputOwner
|
|
12 outputBIDIStatusEnabled
|
|
13 outputPrinterModel
|
|
14 outputPrinterDisplay
|
|
15 outputHandshake
|
|
16 outputJobLog (includes all job logging)
|
|
17 outputSerialConfig"
|
|
::= { psOutput 4 }
|
|
|
|
outputAvailableTrapsMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bit mask describing what output printer traps are available
|
|
|
|
bit Description
|
|
--- -----------
|
|
0 online
|
|
1 offline
|
|
2 printer attached
|
|
3 toner low
|
|
4 paper out
|
|
5 paper jam
|
|
6 door open
|
|
7 printer error"
|
|
::= { psOutput 5 }
|
|
|
|
outputNumLogEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of job log entries per output port."
|
|
::= { outputJobLog 1 }
|
|
|
|
outputJobLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OutputJobLogEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A 2 dimensional list of Job log entries indexed by the output port
|
|
number and the log entry index (1 through outputNumJobLogEntries).
|
|
The number of entries per output port is given by the value of
|
|
outputNumJobLogEntries."
|
|
::= { outputJobLog 2 }
|
|
|
|
outputJobLogEntry OBJECT-TYPE
|
|
SYNTAX OutputJobLogEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Job log entry."
|
|
INDEX { outputIndex }
|
|
::= { outputJobLogTable 1 }
|
|
|
|
OutputJobLogEntry ::=
|
|
SEQUENCE {
|
|
outputJobLogInformation
|
|
DisplayString,
|
|
outputJobLogTime
|
|
DisplayString
|
|
}
|
|
|
|
outputJobLogInformation OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual description of print job information.
|
|
The protocol, source, and file size are always included.
|
|
Other information such as File Server, Queue, File Name, etc
|
|
will be included if available."
|
|
::= { outputJobLogEntry 1 }
|
|
|
|
outputJobLogTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string indicating the elasped time since the last job was
|
|
printed. Reported in form X hours X minutes X seconds."
|
|
::= { outputJobLogEntry 2 }
|
|
|
|
outputTotalJobTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OutputTotalJobEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table showing the total number of jobs printed for each port."
|
|
::= { outputJobLog 3 }
|
|
|
|
outputTotalJobEntry OBJECT-TYPE
|
|
SYNTAX OutputTotalJobEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the outputTotalJobTable."
|
|
INDEX { outputTotalJobIndex }
|
|
::= { outputTotalJobTable 1 }
|
|
|
|
OutputTotalJobEntry ::=
|
|
SEQUENCE {
|
|
outputTotalJobIndex
|
|
INTEGER,
|
|
outputTotalJobsLogged
|
|
INTEGER
|
|
}
|
|
|
|
outputTotalJobIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for entry in the outputTotalJobTable.
|
|
Its value ranges between 1 and the value of
|
|
numPorts."
|
|
::= { outputTotalJobEntry 1 }
|
|
|
|
outputTotalJobsLogged OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of jobs printed by the port since the
|
|
print server was powered on. "
|
|
::= { outputTotalJobEntry 2 }
|
|
|
|
|
|
-- the tcpip group
|
|
|
|
tcpipGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the tcpip group."
|
|
::= { tcpip 1 }
|
|
|
|
tcpipEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not the tcpip protocol stack is
|
|
enabled on the print server.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpip 2 }
|
|
|
|
tcpipRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will restore all tcpip parameters on
|
|
the print server to factory defaults, as well as reset
|
|
the print server."
|
|
::= { tcpipCommands 1 }
|
|
|
|
tcpipFirmwareUpgrade OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will put the print server into firmware
|
|
upgrade mode waiting to receive a firmware upgrade file
|
|
via tftp."
|
|
::= { tcpipCommands 2 }
|
|
|
|
tcpipIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The Internet Address.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpipConfigure 1 }
|
|
|
|
tcpipDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The default gateway for the print server.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpipConfigure 2 }
|
|
|
|
tcpipSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The subnet mask for the print server.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpipConfigure 3 }
|
|
|
|
tcpipUsingNetProtocols OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 indicates that the print server is using
|
|
a combination of RARP, BOOTP, default IP address, or
|
|
gleaning to determine its IP address.
|
|
|
|
See tcpipBootProtocolsEnabled to determine which boot
|
|
protocols are enabled. If the value of
|
|
tcpipUsingNetProtocols is 1, the IP address is stored
|
|
permanently in flash memory.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpipConfigure 4 }
|
|
|
|
tcpipBootProtocolsEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which boot
|
|
protocols will be used to determine the print server's
|
|
IP address.
|
|
|
|
BIT Boot Protocol Enabled
|
|
--- --------------------------
|
|
0 RARP
|
|
1 BootP
|
|
2 DHCP
|
|
3 Gleaning
|
|
4 Default Address Enabled (If no address after 2 minutes
|
|
timeout and go to 198.102.102.254)
|
|
|
|
A value of 31 indicates that all boot protocols are
|
|
enabled. These protocols will only be used if
|
|
tcpipUsingNetProtocols is set to 2.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpipConfigure 5 }
|
|
|
|
tcpipIPAddressSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permanent(1),
|
|
default(2),
|
|
rarp(3),
|
|
bootp(4),
|
|
dhcp(5),
|
|
glean(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This variable indicates how the IP address for the
|
|
print server was determined."
|
|
::= { tcpipConfigure 6 }
|
|
|
|
tcpipIPAddressServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This variable indicates the source of the IP address
|
|
if a boot protocol was used. This value will be
|
|
0.0.0.0 if no boot server was used."
|
|
::= { tcpipConfigure 7 }
|
|
|
|
tcpipTimeoutChecking OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 indicates that a packet timeout
|
|
will be active on all tcp connections. If a packet has
|
|
not been received from the connection within this timeout the
|
|
connection will be reset.
|
|
|
|
To set this timeout, see tcpipTimeoutCheckingValue"
|
|
::= { tcpipConfigure 8 }
|
|
|
|
tcpipNumTraps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of UDP trap destinations."
|
|
::= { tcpipConfigure 9 }
|
|
|
|
tcpipTrapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TcpipTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of UDP trap definitions. The number of
|
|
entries is given by the value of tcpipNumTraps."
|
|
::= { tcpipConfigure 10 }
|
|
|
|
tcpipTrapEntry OBJECT-TYPE
|
|
SYNTAX TcpipTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the tcpipTrapTable."
|
|
INDEX { tcpipTrapIndex }
|
|
::= { tcpipTrapTable 1 }
|
|
|
|
TcpipTrapEntry ::=
|
|
SEQUENCE {
|
|
tcpipTrapIndex
|
|
INTEGER,
|
|
tcpipTrapDestination
|
|
IpAddress,
|
|
tcpipProtocolTrapMask
|
|
INTEGER,
|
|
tcpipPrinterTrapMask
|
|
INTEGER,
|
|
tcpipOutputTrapMask
|
|
INTEGER
|
|
}
|
|
|
|
tcpipTrapIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for entry in the tcpipTrapTable.
|
|
Its value ranges between 1 and the value of
|
|
tcpipNumTraps."
|
|
::= { tcpipTrapEntry 1 }
|
|
|
|
tcpipTrapDestination OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the IP address that traps are sent to.
|
|
A value of 0.0.0.0 will disable traps over UDP."
|
|
::= { tcpipTrapEntry 2 }
|
|
|
|
tcpipProtocolTrapMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which protocol
|
|
specific traps will be sent out via UDP.
|
|
|
|
Currently no protocol specific traps are supported."
|
|
::= { tcpipTrapEntry 3 }
|
|
|
|
tcpipPrinterTrapMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which printer
|
|
specific traps will be sent out via UDP.
|
|
|
|
A value of 65535 indicates that all printer specific
|
|
traps should be reported via UDP.
|
|
|
|
BIT CONDITION
|
|
--- --------------------------
|
|
0 On-line (Condition cleared)
|
|
1 Off-line
|
|
2 No printer attached
|
|
3 Toner Low
|
|
4 Paper Out
|
|
5 Paper Jam
|
|
6 Door Open
|
|
15 Printer Error"
|
|
::= { tcpipTrapEntry 4 }
|
|
|
|
tcpipOutputTrapMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which physical
|
|
output ports will be checked when generating printer
|
|
specific traps to be sent out via UDP.
|
|
|
|
A value of 65535 indicates that all physical output ports
|
|
will generate traps.
|
|
|
|
BIT CONDITION
|
|
--- --------------------------
|
|
0 Port 1
|
|
1 Port 2
|
|
2 Port 3
|
|
3 Port 4
|
|
... ..."
|
|
::= { tcpipTrapEntry 5 }
|
|
|
|
tcpipBanners OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 indicates that banners will be printed
|
|
with tcpip jobs.
|
|
|
|
Even if the group is supported, this variable may not be
|
|
supported."
|
|
::= { tcpipConfigure 11 }
|
|
|
|
tcpipWinsAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The IP address of the WINS server.
|
|
|
|
The print server will register its sysName to
|
|
this WINS server."
|
|
::= { tcpipConfigure 12 }
|
|
|
|
tcpipWinsAddressSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dhcp(1),
|
|
permanent(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The source of the WINS server address.
|
|
|
|
If set to dhcp, the print server will use the
|
|
WINS address supplied with dhcp.
|
|
|
|
If it is set to permanent, it will use the
|
|
WINS address stored in flash."
|
|
::= { tcpipConfigure 13 }
|
|
|
|
tcpipConfigPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (5..24))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The print server html/telnet configuration password.
|
|
This value cannot be read, just set."
|
|
::= { tcpipConfigure 14 }
|
|
|
|
tcpipTimeoutCheckingValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The TCP connection timeout in seconds.
|
|
A value of 0 has the same effect as disabling
|
|
timeout checking."
|
|
::= { tcpipConfigure 15 }
|
|
|
|
tcpipArpInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..30)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The ARP interval in minutes.
|
|
The print server will ARP itself once when
|
|
this timer expires. Set to 0 to disable."
|
|
::= { tcpipConfigure 16 }
|
|
|
|
tcpipRawPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The raw TCP port number the print server will listen
|
|
for print jobs on. On multiple port devices, additional
|
|
ports will sequentially follow this port number.
|
|
The default port is 9100. Setting this value to a TCP
|
|
port that is in use by another TCP application will
|
|
return an error.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpipConfigure 17 }
|
|
|
|
tcpipNumSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of secure IP address ranges."
|
|
::= { tcpipConfigure 18 }
|
|
|
|
tcpipSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TcpipSecurityEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of secure IP address ranges. This adds security for both
|
|
printing and admin rights.
|
|
|
|
AdminEnabled: When the admin enabled field is set to yes for a secure
|
|
address range, the print server may only be configured via IP from
|
|
IP address within that range. If the admin field is not set for any address
|
|
ranges, the print server will accept admin commands from any IP address
|
|
which has the valid community names and/or passwords.
|
|
|
|
PortMask: When there is a port mask set for a secure IP address range, the
|
|
print server will only accept TCP/IP print jobs from hosts that are in the
|
|
secure address range. If there are no ranges with a port mask set, the print
|
|
server will accept TCP/IP print jobs from any host.
|
|
|
|
The number of entries is given by the value of tcpipNumSecurity."
|
|
::= { tcpipConfigure 19 }
|
|
|
|
tcpipSecurityEntry OBJECT-TYPE
|
|
SYNTAX TcpipSecurityEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the tcpipSecurityTable."
|
|
INDEX { tcpipSecurityIndex }
|
|
::= { tcpipSecurityTable 1 }
|
|
|
|
TcpipSecurityEntry ::=
|
|
SEQUENCE {
|
|
tcpipSecurityIndex
|
|
INTEGER,
|
|
tcpipSecureStartIPAddress
|
|
IpAddress,
|
|
tcpipSecureEndIPAddress
|
|
IpAddress,
|
|
tcpipSecurePrinterMask
|
|
INTEGER,
|
|
tcpipSecureAdminEnabled
|
|
INTEGER
|
|
}
|
|
|
|
tcpipSecurityIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for entry in the tcpipSecurityTable.
|
|
Its value ranges between 1 and the value of
|
|
tcpipNumSecurity."
|
|
::= { tcpipSecurityEntry 1 }
|
|
|
|
tcpipSecureStartIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the starting IP address for the secure IP
|
|
address range. A value of 0.0.0.0 for both
|
|
tcpipStartIPAddress and tcpipEndIPAddress will
|
|
disable the address range."
|
|
::= { tcpipSecurityEntry 2 }
|
|
|
|
tcpipSecureEndIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the ending IP address for the secure IP
|
|
address range. A value of 0.0.0.0 for both
|
|
tcpipStartIPAddress and tcpipEndIPAddress will
|
|
disable the address range."
|
|
::= { tcpipSecurityEntry 3 }
|
|
|
|
tcpipSecurePrinterMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 8 bit mask which determines which physical
|
|
output ports this range of IP addresses can print to.
|
|
A value of 127 indicates that the range of IP addresses
|
|
can print to any of the output ports.
|
|
|
|
This value can not be configured until a valid start and
|
|
end address range have been configured.
|
|
|
|
|
|
BIT CONDITION
|
|
--- --------------------------
|
|
0 Port 1
|
|
1 Port 2
|
|
2 Port 3
|
|
3 Port 4
|
|
... ...
|
|
8 Reserved, must be set to 0."
|
|
::= { tcpipSecurityEntry 4 }
|
|
|
|
tcpipSecureAdminEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
" This allows an advanced level of admin security for IP. Setting this will
|
|
restrict which IP addresses can configure the print server. The
|
|
correct community names and passwords are still required if this is used, it
|
|
just adds another level of security.
|
|
|
|
Indicates whether or not admin rights are enabled for this range of
|
|
IP addresses. If no range of addresses has this enabled, then any IP address
|
|
can configure the print server if it has the correct community names and/or
|
|
passwords. If this field is set to yes for any range of addresses, the
|
|
print server will only be configurable via IP from that range of addresses.
|
|
|
|
This value can not be configured until a valid start and end address range
|
|
have been configured."
|
|
|
|
::= { tcpipSecurityEntry 5 }
|
|
|
|
tcpipLowBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will optimize the TCP stack for low bandwidth
|
|
networks. A value of 1 will optimize the TCP stack for high
|
|
bandwidth networks."
|
|
::= { tcpipConfigure 20 }
|
|
|
|
tcpipNumLogicalPrinters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of available logical printers."
|
|
::= { tcpipConfigure 21 }
|
|
|
|
tcpipMLPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TcpipMLPEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of the available logical printers.
|
|
The number of entries is given by the value of tcpipNumLogicalPrinters."
|
|
::= { tcpipConfigure 22 }
|
|
|
|
tcpipMLPEntry OBJECT-TYPE
|
|
SYNTAX TcpipMLPEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the tcpipMLPTable."
|
|
INDEX { tcpipMLPIndex }
|
|
::= { tcpipMLPTable 1 }
|
|
|
|
TcpipMLPEntry ::=
|
|
SEQUENCE {
|
|
tcpipMLPIndex
|
|
INTEGER,
|
|
tcpipMLPName
|
|
DisplayString,
|
|
tcpipMLPPort
|
|
INTEGER,
|
|
tcpipMLPTCPPort
|
|
INTEGER,
|
|
tcpipMLPPreString
|
|
DisplayString,
|
|
tcpipMLPPostString
|
|
DisplayString,
|
|
tcpipMLPDeleteBytes
|
|
INTEGER
|
|
}
|
|
|
|
tcpipMLPIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A unique value for entry in the tcpipMLPTable.
|
|
Its value ranges between 1 and the value of
|
|
tcpipNumLogicalPrinters."
|
|
::= { tcpipMLPEntry 1 }
|
|
|
|
|
|
tcpipMLPName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the name of the logical printer. This name is also
|
|
the LPR remote queue name associated with the logical printer."
|
|
::= { tcpipMLPEntry 2 }
|
|
|
|
tcpipMLPPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of the physical output port associated with the logical
|
|
printer.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpipMLPEntry 3 }
|
|
|
|
tcpipMLPTCPPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The TCP port associated with the logical printer. Any print data
|
|
sent to this TCP port will be processed through this logical
|
|
printer entry.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { tcpipMLPEntry 4 }
|
|
|
|
tcpipMLPPreString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This contains any data that should be sent down to the printer
|
|
at the beginning of jobs sent to this logical printer. To enter
|
|
non-printable ascii characters in the string, enclose the decimal
|
|
value inside of <>. For example, to enter an ESC-E the string would
|
|
be '<27>E'."
|
|
::= { tcpipMLPEntry 5 }
|
|
|
|
tcpipMLPPostString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This contains any data that should be sent down to the printer
|
|
at the end of jobs sent to this logical printer. To enter
|
|
non-printable ascii characters in the string, enclose the decimal
|
|
value inside of <>. For example, to enter an ESC-E the string would
|
|
be '<27>E'."
|
|
::= { tcpipMLPEntry 6 }
|
|
|
|
tcpipMLPDeleteBytes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of bytes that will be deleted from the beginning of
|
|
jobs sent to this logical printer."
|
|
::= { tcpipMLPEntry 7 }
|
|
|
|
tcpipSmtpServerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The IP address of the e-mail server which will be used to send e-mail
|
|
notification of printer status conditions. This address must contain the
|
|
valid IP address of an e-mail server before any of the contents of the
|
|
SmtpTable are used."
|
|
::= { tcpipConfigure 23 }
|
|
|
|
tcpipNumSmtpDestinations OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of configurable e-mail destinations to receive
|
|
printer status conditions. "
|
|
::= { tcpipConfigure 24 }
|
|
|
|
tcpipSmtpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TcpipSmtpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SMTP e-mail addresses and printer status conditions
|
|
to send e-mails for. The number of entries is given by the
|
|
value of tcpipNumSmtpDestinations."
|
|
::= { tcpipConfigure 25 }
|
|
|
|
tcpipSmtpEntry OBJECT-TYPE
|
|
SYNTAX TcpipSmtpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the tcpipSmtpTable."
|
|
INDEX { tcpipSmtpIndex }
|
|
::= { tcpipSmtpTable 1 }
|
|
|
|
TcpipSmtpEntry ::=
|
|
SEQUENCE {
|
|
tcpipSmtpIndex
|
|
INTEGER,
|
|
tcpipSmtpEmailAddr
|
|
OCTET STRING,
|
|
tcpipSmtpProtocolMask
|
|
INTEGER,
|
|
tcpipSmtpPrinterMask
|
|
INTEGER,
|
|
tcpipSmtpOutputMask
|
|
INTEGER
|
|
}
|
|
|
|
tcpipSmtpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for entry in the tcpipSmtpTable.
|
|
Its value ranges between 1 and the value of
|
|
tcpipNumSmtpDestinations."
|
|
::= { tcpipSmtpEntry 1 }
|
|
|
|
tcpipSmtpEmailAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the e-mail address that printer status conditions
|
|
are sent to. If this string is empty the status conditions will
|
|
not be sent."
|
|
::= { tcpipSmtpEntry 2 }
|
|
|
|
tcpipSmtpProtocolMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which protocol
|
|
specific conditions will be sent out via e-mail.
|
|
|
|
Currently no protocol specific conditions are supported."
|
|
::= { tcpipSmtpEntry 3 }
|
|
|
|
tcpipSmtpPrinterMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which printer
|
|
specific conditions will be sent out via e-mail.
|
|
|
|
A value of 65535 indicates that all printer specific
|
|
conditions should be reported via e-mail.
|
|
|
|
BIT CONDITION
|
|
--- --------------------------
|
|
0 On-line (Condition cleared)
|
|
1 Off-line
|
|
2 No printer attached
|
|
3 Toner Low
|
|
4 Paper Out
|
|
5 Paper Jam
|
|
6 Door Open
|
|
15 Printer Error"
|
|
::= { tcpipSmtpEntry 4 }
|
|
|
|
tcpipSmtpOutputMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which physical
|
|
output ports will be checked when generating printer
|
|
specific conditions to be sent out via e-mail.
|
|
|
|
A value of 65535 indicates that all physical output ports
|
|
will generate e-mails upon a change in status.
|
|
|
|
BIT CONDITION
|
|
--- --------------------------
|
|
0 Port 1
|
|
1 Port 2
|
|
2 Port 3
|
|
3 Port 4
|
|
... ..."
|
|
::= { tcpipSmtpEntry 5 }
|
|
|
|
tcpipWebAdminName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (25))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the admin name used by web configuration for login."
|
|
::= { tcpipConfigure 26 }
|
|
|
|
tcpipWebAdminPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (25))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the admin password used by web configuration for login."
|
|
::= { tcpipConfigure 27 }
|
|
|
|
tcpipWebUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (25))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the user name used by web configuration for login. Not
|
|
currently used. "
|
|
::= { tcpipConfigure 28 }
|
|
|
|
tcpipWebUserPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (25))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the user password used by web configuration for login. Not
|
|
currently used."
|
|
::= { tcpipConfigure 29 }
|
|
|
|
tcpipWebHtttpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The port number used to communicate over http. Must be between 0 and
|
|
65535. It must not be the same as any other port used. Other ports used are
|
|
20, 21, 23, 515, & raw port numbers (9100, 9101, ... if at default)"
|
|
::= { tcpipConfigure 30 }
|
|
|
|
tcpipWebFaqURL OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the URL for FAQ at the ESI (or other OEM) website."
|
|
::= { tcpipConfigure 31 }
|
|
|
|
tcpipWebUpdateURL OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the URL for finding firmware updates at the ESI
|
|
(or other OEM) website."
|
|
::= { tcpipConfigure 32 }
|
|
|
|
tcpipWebCustomLinkName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (25))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the name assigned to the custom link defined by the user."
|
|
::= { tcpipConfigure 33 }
|
|
|
|
tcpipWebCustomLinkURL OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the URL for a custom link specified by the user."
|
|
::= { tcpipConfigure 34 }
|
|
|
|
tcpipPOP3ServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The IP address of the POP3 server from which email will be retrieved.
|
|
This address must contain the valid IP address of a POP3 server before
|
|
any attempts to retrieve email will be made."
|
|
::= { tcpipConfigure 35 }
|
|
|
|
tcpipPOP3PollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of seconds between attempts to retrieve mail from the
|
|
POP3 server. "
|
|
::= { tcpipConfigure 36 }
|
|
|
|
tcpipPOP3UserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the user name for the print server's email account on
|
|
the POP3 server."
|
|
::= { tcpipConfigure 37 }
|
|
|
|
tcpipPOP3Password OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (20))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the password for the print server's email account on
|
|
the POP3 server."
|
|
::= { tcpipConfigure 38 }
|
|
|
|
tcpipDomainName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the Domain name used by POP3 and SMTP."
|
|
::= { tcpipConfigure 39 }
|
|
|
|
tcpipError OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains any tcpip specific error information."
|
|
::= { tcpipStatus 1 }
|
|
|
|
tcpipDisplayMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bit mask describing what should be displayed by the utilities
|
|
|
|
bit Description
|
|
--- -----------
|
|
0 tcpipAddress (Includes tcpipDefaultGateway and tcpipSubnetMask)
|
|
1 tcpipUsingNetProtocols (Includes tcpipBootProtocolsEnabled, tcpipAddressSource, tcpipAddressServerAddress)
|
|
2 tcpipTimeoutChecking
|
|
3 tcpipTraps (Includes all trap info)
|
|
4 tcpipBanners
|
|
5 tcpipSecurity (Includes all security info)
|
|
6 tcpipWinsAddress (Includes tcpipWinsAddressSource)
|
|
7 tcpipConfigPassword
|
|
8 tcpipTimeoutCheckingValue
|
|
9 tcpipArpInterval
|
|
10 tcpipRawPortNumber
|
|
11 tcpipError
|
|
12 tcpipLowBandwidth
|
|
13 tcpipMLP (Includes all logical printer settings)"
|
|
::= { tcpip 6 }
|
|
|
|
-- the netware group
|
|
|
|
nwGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the netware group."
|
|
::= { netware 1 }
|
|
|
|
nwEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not the NetWare protocol stack is
|
|
enabled on the print server.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { netware 2 }
|
|
|
|
nwRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will restore all NetWare parameters on
|
|
the print server to factory defaults, as well as reset
|
|
the print server."
|
|
::= { nwCommands 1 }
|
|
|
|
nwFirmwareUpgrade OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will put the print server into firmware
|
|
upgrade mode."
|
|
::= { nwCommands 2 }
|
|
|
|
nwFrameFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
ethernet-II(2),
|
|
ethernet-802-3(3),
|
|
ethernet-802-2(4),
|
|
ethernet-Snap(5),
|
|
token-Ring(6),
|
|
token-Ring-Snap(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the frame format that the print server is
|
|
using. See nwSetFrameFormat to determine which frame
|
|
frame format the print server is configured for."
|
|
::= { nwConfigure 1 }
|
|
|
|
nwSetFrameFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto-Sense(1),
|
|
forced-Ethernet-II(2),
|
|
forced-Ethernet-802-3(3),
|
|
forced-Ethernet-802-2(4),
|
|
forced-Ethernet-Snap(5),
|
|
forced-Token-Ring(6),
|
|
forced-Token-Ring-Snap(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the frame format that the print server is
|
|
using. Setting this value to 1 (Auto_Sense) indicates
|
|
that automatic frame format sensing will be used.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwConfigure 2 }
|
|
|
|
nwMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
pserver(2),
|
|
rprinter(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Mode the print server is running in.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwConfigure 3 }
|
|
|
|
nwPrintServerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..47))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains print server name.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwConfigure 4 }
|
|
|
|
nwPrintServerPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..9))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The print server password. This value cannot be read,
|
|
just set.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwConfigure 5 }
|
|
|
|
nwQueueScanTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Determines how often, in tenths of a second that the
|
|
print server will scan the queues for jobs.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwConfigure 6 }
|
|
|
|
nwNetworkNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The print server's network number."
|
|
::= { nwConfigure 7 }
|
|
|
|
nwMaxFileServers OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The print server maximum number of file servers which
|
|
it can be attached to at once."
|
|
::= { nwConfigure 8 }
|
|
|
|
nwFileServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwFileServerEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of file servers to service."
|
|
::= { nwConfigure 9 }
|
|
|
|
nwFileServerEntry OBJECT-TYPE
|
|
SYNTAX NwFileServerEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A file server for the print server to service."
|
|
INDEX { nwFileServerIndex }
|
|
::= { nwFileServerTable 1 }
|
|
|
|
NwFileServerEntry ::=
|
|
SEQUENCE {
|
|
nwFileServerIndex
|
|
INTEGER,
|
|
nwFileServerName
|
|
DisplayString,
|
|
nwFileServerConnectionStatus
|
|
INTEGER
|
|
}
|
|
|
|
nwFileServerIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A unique value for each file server. Its value
|
|
ranges between 1 and the value of nwMaxFileServers.
|
|
The value for each server must remain constant at
|
|
least from one re-initialization of the entity's
|
|
network management system to the next
|
|
re-initialization. The first entry in the table is
|
|
the default file server."
|
|
::= { nwFileServerEntry 1 }
|
|
|
|
nwFileServerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..47))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The file server name. This name will be NULL if there
|
|
is no file server to be serviced. Only the default
|
|
file server (the first entry in the table) can be set.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwFileServerEntry 2 }
|
|
|
|
nwFileServerConnectionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
startupInProgress(3),
|
|
serverReattaching(4),
|
|
serverNeverAttached(5),
|
|
pse-UNKNOWN-FILE-SERVER(258),
|
|
pse-NO-RESPONSE(261),
|
|
pse-CANT-LOGIN(276),
|
|
pse-NO-SUCH-QUEUE(512),
|
|
pse-UNABLE-TO-ATTACH-TO-QUEUE(515),
|
|
bad-CONNECTION(768),
|
|
bad-SERVICE-CONNECTION(769),
|
|
other(32767)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The value describes the status of the connection
|
|
between the file server and the print server."
|
|
::= { nwFileServerEntry 3 }
|
|
|
|
nwPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwPortEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of NetWare port specific information."
|
|
::= { nwConfigure 10 }
|
|
|
|
nwPortEntry OBJECT-TYPE
|
|
SYNTAX NwPortEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An entry of NetWare port specific information."
|
|
INDEX { nwPortIndex }
|
|
::= { nwPortTable 1 }
|
|
|
|
NwPortEntry ::=
|
|
SEQUENCE {
|
|
nwPortIndex
|
|
INTEGER,
|
|
nwPortStatus
|
|
DisplayString,
|
|
nwPortPrinterNumber
|
|
INTEGER,
|
|
nwPortFontDownload
|
|
INTEGER,
|
|
nwPortPCLQueue
|
|
DisplayString,
|
|
nwPortPSQueue
|
|
DisplayString,
|
|
nwPortFormsOn
|
|
INTEGER,
|
|
nwPortFormNumber
|
|
INTEGER,
|
|
nwPortNotification
|
|
INTEGER
|
|
}
|
|
|
|
nwPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A unique value for each physical output port. Its
|
|
value ranges between 1 and the value of outputNumPorts.
|
|
The value for each port must remain constant at least
|
|
from one re-initialization of the entity's network
|
|
management system to the next re-initialization."
|
|
::= { nwPortEntry 1 }
|
|
|
|
nwPortStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A string indicating the NetWare specific status of the
|
|
physical output port."
|
|
::= { nwPortEntry 2 }
|
|
|
|
nwPortPrinterNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the printer number for the print server to
|
|
use when running in RPRinter mode. A value of 255
|
|
indicates that the port is unconfigured for RPRinter
|
|
mode.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwPortEntry 3 }
|
|
|
|
nwPortFontDownload OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled-No-Power-Sense(2),
|
|
enabled-Power-Sense(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This variable controls the font downloading feature
|
|
of the print server.
|
|
|
|
Disabled - Do not download fonts.
|
|
|
|
Enabled, without Printer Sense - Only download fonts
|
|
after the print server has been reset or power cycled.
|
|
|
|
Enabled, with Printer Sense - Download fonts after the
|
|
print server has been reset or power-cycled, or after
|
|
the printer has been power-cycled. This option is only
|
|
available on certain print servers.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwPortEntry 4 }
|
|
|
|
nwPortPCLQueue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..47))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A string indicating the name of the queue containing
|
|
the PCL fonts to download when font downloading is
|
|
enabled.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwPortEntry 5 }
|
|
|
|
nwPortPSQueue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..47))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A string indicating the name of the queue containing
|
|
the PS fonts to download when font downloading is
|
|
enabled.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwPortEntry 6 }
|
|
|
|
nwPortFormsOn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will enable forms checking.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { nwPortEntry 7 }
|
|
|
|
nwPortFormNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the form number to check jobs against
|
|
when nwPortFormsOn is enabled."
|
|
::= { nwPortEntry 8 }
|
|
|
|
nwPortNotification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will enable job notification."
|
|
::= { nwPortEntry 9 }
|
|
|
|
nwNumTraps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of IPX trap destinations."
|
|
::= { nwConfigure 11 }
|
|
|
|
nwTrapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of IPX trap definitions. The number of
|
|
entries is given by the value of nwNumTraps."
|
|
::= { nwConfigure 12 }
|
|
|
|
nwTrapEntry OBJECT-TYPE
|
|
SYNTAX NwTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the nwTrapTable."
|
|
INDEX { nwTrapIndex }
|
|
::= { nwTrapTable 1 }
|
|
|
|
NwTrapEntry ::=
|
|
SEQUENCE {
|
|
nwTrapIndex
|
|
INTEGER,
|
|
nwTrapDestination
|
|
OCTET STRING,
|
|
nwTrapDestinationNet
|
|
OCTET STRING,
|
|
nwProtocolTrapMask
|
|
INTEGER,
|
|
nwPrinterTrapMask
|
|
INTEGER,
|
|
nwOutputTrapMask
|
|
INTEGER
|
|
}
|
|
|
|
nwTrapIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for entry in the nwTrapTable.
|
|
Its value ranges between 1 and the value of
|
|
nwNumTraps."
|
|
::= { nwTrapEntry 1 }
|
|
|
|
nwTrapDestination OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the network address that IPX traps are sent to.
|
|
A value of 00 00 00 00 00 00 in conjunction with a
|
|
nwTrapDestinationNet of 00 00 00 00 will disable traps
|
|
over IPX."
|
|
::= { nwTrapEntry 2 }
|
|
|
|
nwTrapDestinationNet OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the network number that IPX traps are sent to.
|
|
A value of 00 00 00 00 in conjunction with a
|
|
nwTrapDestination of 00 00 00 00 00 00 will disable
|
|
traps over IPX."
|
|
::= { nwTrapEntry 3 }
|
|
|
|
nwProtocolTrapMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which protocol
|
|
specific traps will be sent out via IPX.
|
|
|
|
Currently no protocol specific traps are supported."
|
|
::= { nwTrapEntry 4 }
|
|
|
|
nwPrinterTrapMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which printer
|
|
specific traps will be sent out via IPX.
|
|
|
|
A value of 65535 indicates that all printer specific
|
|
traps should be reported via IPX.
|
|
|
|
BIT CONDITION
|
|
--- --------------------------
|
|
0 On-line (Condition cleared)
|
|
1 Off-line
|
|
2 No printer attached
|
|
3 Toner Low
|
|
4 Paper Out
|
|
5 Paper Jam
|
|
6 Door Open
|
|
15 Printer Error"
|
|
::= { nwTrapEntry 5 }
|
|
|
|
nwOutputTrapMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the 16 bit mask which determines which physical
|
|
output ports will be checked when generating printer
|
|
specific traps to be sent out via IPX.
|
|
|
|
A value of 65535 indicates that all physical output ports
|
|
will generate traps.
|
|
|
|
BIT CONDITION
|
|
--- --------------------------
|
|
0 Port 1
|
|
1 Port 2
|
|
2 Port 3
|
|
3 Port 4
|
|
... ..."
|
|
::= { nwTrapEntry 6 }
|
|
|
|
|
|
nwNDSPrintServerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..512))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Directory Services object used by the print server to
|
|
connect to the NDS tree. This string contains the entire
|
|
canonicalized name.
|
|
|
|
NOTE: This variable must be stored in Unicode."
|
|
::= { nwConfigure 13 }
|
|
|
|
nwNDSPreferredDSTree OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..47))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Directory Services tree to which the NDS print server
|
|
initially connects."
|
|
::= { nwConfigure 14 }
|
|
|
|
nwNDSPreferredDSFileServer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..47))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The NetWare server to which the NDS print server initially
|
|
makes a bindery connection."
|
|
::= { nwConfigure 15 }
|
|
|
|
nwNDSPacketCheckSumEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Compute the checksum for packets.
|
|
|
|
1 = disabled
|
|
2 = enabled"
|
|
::= { nwConfigure 16 }
|
|
|
|
nwNDSPacketSignatureLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Packet signature is a security method to prevent
|
|
packet forging.
|
|
|
|
1 = disabled
|
|
2 = enabled
|
|
3 = preferred
|
|
4 = required"
|
|
::= { nwConfigure 17 }
|
|
|
|
nwAvailablePrintModes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Reports which NetWare print modes are available.
|
|
|
|
BIT CONDITION
|
|
--- --------------------------
|
|
0 PServer
|
|
1 RPrinter
|
|
2 NDS
|
|
3 SPX Direct
|
|
4 JetAdmin
|
|
"
|
|
::= { nwConfigure 18 }
|
|
|
|
nwDirectPrintEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not direct mode ipx/spx
|
|
printing is enabled."
|
|
::= { nwConfigure 19 }
|
|
|
|
nwJAConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not JetAdmin was used to configure
|
|
the netware settings."
|
|
::= { nwConfigure 20 }
|
|
|
|
nwDisableSAP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not SAPs are enabled."
|
|
::= { nwConfigure 21 }
|
|
|
|
nwError OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..160))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains any NetWare specific error information."
|
|
::= { nwStatus 1 }
|
|
|
|
nwDisplayMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bit mask describing what should be displayed by the utilities
|
|
|
|
bit Description
|
|
--- -----------
|
|
0 nwFrameFormat
|
|
1 nwJetAdmin
|
|
2 nwFileServer (Includes all file server info)
|
|
3 nwMode
|
|
4 nwPrintServerName
|
|
5 nwPrintServerPassword
|
|
6 nwQueueScanTime
|
|
7 nwNetworkNumber
|
|
8 nwPortStatus
|
|
9 nwPortPrinterNumber
|
|
10 nwPortFontDownload (Includes nwPortPCLQueue and nwPortPSQueue)
|
|
11 nwPortFormsOn (Includes nwPortFormsNumber)
|
|
12 nwPortNotification
|
|
13 nwTraps (Includes all trap info)
|
|
14 nwNDSPrintServerName
|
|
15 nwNDSPreferredDSTree
|
|
16 nwNDSPreferredDSFileServer
|
|
17 nwNDSPacketCheckSumEnabled
|
|
18 nwNDSPacketSignatureLevel
|
|
19 nwDirectPrintEnabled
|
|
20 nwError
|
|
21 nwSapDisable"
|
|
::= { netware 6 }
|
|
|
|
-- the vines group
|
|
|
|
bvGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the vines group."
|
|
::= { vines 1 }
|
|
|
|
bvEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not the Banyan VINES protocol
|
|
stack is enabled on the print server."
|
|
::= { vines 2 }
|
|
|
|
bvRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will restore all VINES parameters on
|
|
the print server to factory defaults, as well as reset
|
|
the device."
|
|
::= { bvCommands 1 }
|
|
|
|
bvFirmwareUpgrade OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will put the print server into firmware
|
|
upgrade mode."
|
|
::= { bvCommands 2 }
|
|
|
|
bvSetSequenceRouting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic-Routing(1),
|
|
force-Sequenced-Routing(2),
|
|
force-Non-Sequenced-Routing(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sets the VINES Routing selection.
|
|
|
|
Automatic - Utilizes Sequenced Routing if available,
|
|
otherwise uses Non-Sequenced Routing.
|
|
|
|
Force-Sequenced - Will only use Sequenced Routing.
|
|
|
|
Force-Non-Sequenced - Will only use Non-Sequenced Routing
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this.
|
|
|
|
WARNING - Sequential Routing requires a VINES 5.5 or
|
|
greater server on the same subnet."
|
|
::= { bvCommands 3 }
|
|
|
|
bvDisableVPMan OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will disable VPMan access to the print
|
|
server for one minute."
|
|
::= { bvCommands 4 }
|
|
|
|
bvLoginName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (5..63))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The StreetTalk name the device will use to login with.
|
|
This value will be ESIxxxxxxxx where xxxxxxx is the Serial
|
|
number of the device if it is unconfigured.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { bvConfigure 1 }
|
|
|
|
bvLoginPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The password for the login name, bvLoginName. This value
|
|
cannot be read, just set.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { bvConfigure 2 }
|
|
|
|
bvNumberPrintServices OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of Print Services this device supports."
|
|
::= { bvConfigure 3 }
|
|
|
|
bvPrintServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BvPrintServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Table of Print Services for this device."
|
|
::= { bvConfigure 4 }
|
|
|
|
bvPrintServiceEntry OBJECT-TYPE
|
|
SYNTAX BvPrintServiceEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Print Services Table entry."
|
|
INDEX { bvPrintServiceIndex }
|
|
::= { bvPrintServiceTable 1 }
|
|
|
|
BvPrintServiceEntry ::=
|
|
SEQUENCE {
|
|
bvPrintServiceIndex
|
|
INTEGER,
|
|
bvPrintServiceName
|
|
DisplayString,
|
|
bvPrintServiceRouting
|
|
INTEGER
|
|
}
|
|
|
|
bvPrintServiceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A unique value for each print service."
|
|
::= { bvPrintServiceEntry 1 }
|
|
|
|
bvPrintServiceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..63))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The StreetTalk Name for this Print Service.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { bvPrintServiceEntry 2 }
|
|
|
|
bvPrintServiceRouting OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The output port that the print service will print to.
|
|
This value will range from 0 to the number of output ports,
|
|
see outputNumPorts.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { bvPrintServiceEntry 3 }
|
|
|
|
bvPnicDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the VINES PNIC description."
|
|
::= { bvConfigure 5 }
|
|
|
|
bvError OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..48))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains any VINES specific error information."
|
|
::= { bvStatus 1 }
|
|
|
|
bvRouting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sequenced-Routing(1),
|
|
non-Sequenced-Routing(2),
|
|
unknown-Routing(32766),
|
|
protocol-Disabled(32767)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The current VINES Routing being used by the device."
|
|
::= { bvStatus 2 }
|
|
|
|
bvNumPrintServices OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of Print Services this device supports."
|
|
::= { bvStatus 3 }
|
|
|
|
bvPrintServiceStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BvPrintServiceStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Table of Print Service Status Entry's."
|
|
::= { bvStatus 4 }
|
|
|
|
bvPrintServiceStatusEntry OBJECT-TYPE
|
|
SYNTAX BvPrintServiceStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Print Service Status Entry."
|
|
INDEX { bvPSStatusIndex }
|
|
::= { bvPrintServiceStatusTable 1 }
|
|
|
|
BvPrintServiceStatusEntry ::=
|
|
SEQUENCE {
|
|
bvPSStatusIndex
|
|
INTEGER,
|
|
bvPSName
|
|
DisplayString,
|
|
bvPSStatus
|
|
DisplayString,
|
|
bvPSDestination
|
|
INTEGER,
|
|
bvPrinterStatus
|
|
DisplayString,
|
|
bvJobActive
|
|
INTEGER,
|
|
bvJobSource
|
|
DisplayString,
|
|
bvJobTitle
|
|
DisplayString,
|
|
bvJobSize
|
|
DisplayString,
|
|
bvJobNumber
|
|
DisplayString
|
|
}
|
|
|
|
bvPSStatusIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A unique value for each status entry."
|
|
::= { bvPrintServiceStatusEntry 1 }
|
|
|
|
bvPSName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The StreetTalk Name for this Print Service."
|
|
::= { bvPrintServiceStatusEntry 2 }
|
|
|
|
bvPSStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..48))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Print Service Status."
|
|
::= { bvPrintServiceStatusEntry 3 }
|
|
|
|
bvPSDestination OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Port Destination for this print service."
|
|
::= { bvPrintServiceStatusEntry 4 }
|
|
|
|
bvPrinterStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Printer status for this Print Service."
|
|
::= { bvPrintServiceStatusEntry 5 }
|
|
|
|
bvJobActive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Whether there is a VINES job active for this print
|
|
service."
|
|
::= { bvPrintServiceStatusEntry 6 }
|
|
|
|
bvJobSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The active print jobs source."
|
|
::= { bvPrintServiceStatusEntry 7 }
|
|
|
|
bvJobTitle OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The title of the active print job."
|
|
::= { bvPrintServiceStatusEntry 8 }
|
|
|
|
bvJobSize OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The size of the active print job."
|
|
::= { bvPrintServiceStatusEntry 9 }
|
|
|
|
bvJobNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..4))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The VINES job number of the active print job."
|
|
::= { bvPrintServiceStatusEntry 10 }
|
|
|
|
-- the LanMan group
|
|
|
|
lmGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the lanManger group."
|
|
::= { lanManager 1 }
|
|
|
|
lmEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not the Lan Manager protocol
|
|
stack is enabled on the print server.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { lanManager 2 }
|
|
|
|
-- the eTalk group
|
|
|
|
eTalkGroupVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version for the eTalk group."
|
|
::= { eTalk 1 }
|
|
|
|
eTalkEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not the EtherTalk protocol
|
|
stack is enabled on the print server.
|
|
|
|
In order for changes to this variable to take effect,
|
|
the print server must be reset. See cmdReset to do
|
|
this."
|
|
::= { eTalk 2 }
|
|
|
|
eTalkRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A value of 2 will restore all EtherTalk parameters on
|
|
the print server to factory defaults, as well as reset
|
|
the print server."
|
|
::= { eTalkCommands 1 }
|
|
|
|
eTalkNetwork OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the EtherTalk network number that the print
|
|
server is currently using."
|
|
::= { eTalkConfigure 1 }
|
|
|
|
eTalkNode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the EtherTalk node number that the print
|
|
server is currently using."
|
|
::= { eTalkConfigure 2 }
|
|
|
|
eTalkNumPorts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the number of physical output ports that
|
|
are EtherTalk compatible."
|
|
::= { eTalkConfigure 3 }
|
|
|
|
eTalkPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ETalkPortEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of EtherTalk specific port configuration
|
|
information."
|
|
::= { eTalkConfigure 4 }
|
|
|
|
eTalkPortEntry OBJECT-TYPE
|
|
SYNTAX ETalkPortEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An entry of EtherTalk port specific information."
|
|
INDEX { eTalkPortIndex }
|
|
::= { eTalkPortTable 1 }
|
|
|
|
ETalkPortEntry ::=
|
|
SEQUENCE {
|
|
eTalkPortIndex
|
|
INTEGER,
|
|
eTalkPortEnable
|
|
INTEGER,
|
|
eTalkName
|
|
DisplayString,
|
|
eTalkActiveName
|
|
DisplayString,
|
|
eTalkType1
|
|
DisplayString,
|
|
eTalkType2
|
|
DisplayString,
|
|
eTalkZone
|
|
DisplayString,
|
|
eTalkActiveZone
|
|
DisplayString
|
|
}
|
|
|
|
eTalkPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A unique value for each physical output port which is
|
|
compatible with EtherTalk. Its value ranges between
|
|
1 and the value of eTalkNumPorts. The value for each
|
|
port must remain constant at least from one
|
|
re-initialization of the entity's network management
|
|
system to the next re-initialization."
|
|
::= { eTalkPortEntry 1 }
|
|
|
|
eTalkPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates whether or not the physical output port is
|
|
enabled to print via EtherTalk and will show up in the
|
|
Chooser."
|
|
::= { eTalkPortEntry 2 }
|
|
|
|
eTalkName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the EtherTalk name for the print server."
|
|
::= { eTalkPortEntry 3 }
|
|
|
|
eTalkActiveName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This is the EtherTalk name for the print server
|
|
that is currently being used."
|
|
::= { eTalkPortEntry 4 }
|
|
|
|
eTalkType1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the first EtherTalk type. This type is
|
|
mandatory."
|
|
::= { eTalkPortEntry 5 }
|
|
|
|
eTalkType2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the second EtherTalk type. This type is
|
|
optional. Setting this name to NULL will disable it."
|
|
::= { eTalkPortEntry 6 }
|
|
|
|
eTalkZone OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the EtherTalk zone. This must be defined
|
|
on the router."
|
|
::= { eTalkPortEntry 7 }
|
|
|
|
eTalkActiveZone OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the EtherTalk zone that is currently being
|
|
used. This must be defined on the router."
|
|
::= { eTalkPortEntry 8 }
|
|
|
|
eTalkError OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Shows any errors for the EtherTalk protocol."
|
|
::= { eTalkStatus 1 }
|
|
|
|
-- Traps
|
|
|
|
trapPrinterOnline TRAP-TYPE
|
|
ENTERPRISE printServers
|
|
VARIABLES {outputIndex}
|
|
DESCRIPTION
|
|
"The printer is on-line. This trap will be sent
|
|
out after a printer error condition has been cleared."
|
|
--#TYPE "Printer On-Line"
|
|
--#SUMMARY "Port %s is On-Line"
|
|
--#ARGUMENTS{0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 2
|
|
--#STATE OPERATIONAL
|
|
::= 1
|
|
|
|
trapPrinterOffline TRAP-TYPE
|
|
ENTERPRISE printServers
|
|
VARIABLES {outputIndex}
|
|
DESCRIPTION
|
|
"The printer is off-line."
|
|
--#TYPE "Printer Off-Line"
|
|
--#SUMMARY "Port %s is Off-Line"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 2
|
|
--#STATE NONOPERATIONAL
|
|
::= 2
|
|
|
|
trapNoPrinterAttached TRAP-TYPE
|
|
ENTERPRISE printServers
|
|
VARIABLES {outputIndex}
|
|
DESCRIPTION
|
|
"No printer is attached to the output port."
|
|
--#TYPE "No Printer Attached"
|
|
--#SUMMARY "Port %s - No Printer Attached"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 2
|
|
--#STATE NONOPERATIONAL
|
|
::= 3
|
|
|
|
trapPrinterTonerLow TRAP-TYPE
|
|
ENTERPRISE printServers
|
|
VARIABLES {outputIndex}
|
|
DESCRIPTION
|
|
"The printer toner is low."
|
|
--#TYPE "Toner Low"
|
|
--#SUMMARY "Port %s - Toner Low"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY MINOR
|
|
--#TIMEINDEX 2
|
|
--#STATE DEGRADED
|
|
::= 4
|
|
|
|
trapPrinterPaperOut TRAP-TYPE
|
|
ENTERPRISE printServers
|
|
VARIABLES {outputIndex}
|
|
DESCRIPTION
|
|
"The printer is out of paper."
|
|
--#TYPE "Printer Out of Paper"
|
|
--#SUMMARY "Port %s - Out of Paper"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY MINOR
|
|
--#TIMEINDEX 2
|
|
--#STATE NONOPERATIONAL
|
|
::= 5
|
|
|
|
trapPrinterPaperJam TRAP-TYPE
|
|
ENTERPRISE printServers
|
|
VARIABLES {outputIndex}
|
|
DESCRIPTION
|
|
"The printer has a paper jam."
|
|
--#TYPE "Paper Jam"
|
|
--#SUMMARY "Port %s - Paper Jam"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY MAJOR
|
|
--#TIMEINDEX 2
|
|
--#STATE NONOPERATIONAL
|
|
::= 6
|
|
|
|
trapPrinterDoorOpen TRAP-TYPE
|
|
ENTERPRISE printServers
|
|
VARIABLES {outputIndex}
|
|
DESCRIPTION
|
|
"The printer door is open."
|
|
--#TYPE "Printer Door Open"
|
|
--#SUMMARY "Port %s - Printer Door Open"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#TIMEINDEX 2
|
|
--#STATE NONOPERATIONAL
|
|
::= 7
|
|
|
|
trapPrinterError TRAP-TYPE
|
|
ENTERPRISE printServers
|
|
VARIABLES {outputIndex}
|
|
DESCRIPTION
|
|
"General printer error."
|
|
--#TYPE "General Printer Error"
|
|
--#SUMMARY "Port %s - Printer Error"
|
|
--#ARGUMENTS {0}
|
|
--#SEVERITY MINOR
|
|
--#TIMEINDEX 2
|
|
--#STATE NONOPERATIONAL
|
|
::= 16
|
|
END
|