graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/transition/TN-VLAN-MGMT-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1723 lines
66 KiB
Text
Raw Permalink Blame History

-- ***********************************************************************************************
-- TN-VLAN-MGMT-MIB.mib: Transition Networks, Inc. Enterprise MIB for VLAN management
--
-- Copyright (c) 2014 by Transition Networks, Inc.
-- All rights reserved.
--
-- ***********************************************************************************************
--
TN-VLAN-MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
enterprises FROM SNMPv2-SMI
RowStatus, MacAddress,
TEXTUAL-CONVENTION, DisplayString, TimeStamp, TruthValue FROM SNMPv2-TC
entPhysicalIndex FROM ENTITY-MIB
InterfaceIndexOrZero, InterfaceIndex, ifIndex FROM IF-MIB
VlanIndex, PortList FROM Q-BRIDGE-MIB
EightOTwoOui FROM DOT3-OAM-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
tnProducts FROM TRANSITION-SMI;
tnVlanQoSMgmtMIB MODULE-IDENTITY
LAST-UPDATED "201405010000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
" Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"The mib module for managing VLAN and QoS in TN platform products."
REVISION "200901080000Z"
DESCRIPTION
"Initial Revision of this module"
REVISION "201102250000Z"
DESCRIPTION
"Add tnVLANDbFlush and tnFIDDbFlush"
REVISION "201205180000Z"
DESCRIPTION
"Add tnSysVlanExtMgmtPortType, tnSysVLANExtCustomSTag, tnIfVLANTagMgmt2PortType,
tnIfVLANTagMgmt2TxTagType and tnIfVLANTagMgmt2ConfigConflicts"
REVISION "201212210000Z"
DESCRIPTION
"Add Vlan Control List tnVclMgmt subtree"
REVISION "201405010000Z"
DESCRIPTION
"Added Port VLAN Configuration Mode, Allowed VLANs, Forbidden VLANs"
REVISION "201506170000Z"
DESCRIPTION
"Added Allowed Access VLANs
tnVlanConfigGlobalsMainAccessVlans0To1K
tnVlanConfigGlobalsMainAccessVlans1KTo2K
tnVlanConfigGlobalsMainAccessVlans2KTo3K
tnVlanConfigGlobalsMainAccessVlans3KTo4K"
::= { tnProducts 4 }
--
-- Textual Conventions
--
TnVlanServiceTranslationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"T"
SYNTAX INTEGER {
noTranslation(1),
untaggedUntagged(2),
untaggedSingleTagged(3),
singleTaggedSingleTagged(4),
singleTaggedTranslation(5),
singleTaggedDoubleTagged(6),
doubleTaggedDoubleTagged(7),
doubleTaggedTranslation(8),
addProviderTag(9)
}
TNVlanListQuarter ::= TEXTUAL-CONVENTION
DISPLAY-HINT "128x"
STATUS current
DESCRIPTION
"A list representing 1024 VLAN IDs.
The type should be interpreted as a sequence of bits, each bit
representing one VLAN ID. If a bit is set (1) the represented VLAN is
included in the VLAN list. If a bit is not set (0) the represented VLAN
is not included in the VLAN list.
The least significant bit of each byte represents a smaller VLAN ID
than a more significant bit of a byte.
If for example the VLAN list represents VLAN IDs from 0 to 1023,
bit 0 of the first byte represents VLAN ID 0, bit 1 of the first byte
represents VLAN ID 1, and so on. The most significant bit of the 128th
byte therefore represents VLAN ID 1023.
An implementation that needs to represent all 4K VLANs will divide
the VLAN list into four equally sized objects. VLAN ID 0 is included
in the first object even though it is not used."
SYNTAX OCTET STRING (SIZE (128))
--
-- Section 1 :
--
tnVlanQoSMgmtNotifications OBJECT IDENTIFIER ::= { tnVlanQoSMgmtMIB 0 }
tnVlanQoSMgmtObjects OBJECT IDENTIFIER ::= { tnVlanQoSMgmtMIB 1 }
tnVlanMQoSgmtConformance OBJECT IDENTIFIER ::= { tnVlanQoSMgmtMIB 2 }
--
-- TN Vlan management information
--
tnSysVlanMgmt OBJECT IDENTIFIER ::= { tnVlanQoSMgmtObjects 1 }
tnDevSysPriorityMgmt OBJECT IDENTIFIER ::= { tnVlanQoSMgmtObjects 2 }
tnInterfaceQoSMgmt OBJECT IDENTIFIER ::= { tnVlanQoSMgmtObjects 3 }
tnInterfaceVlanMgmt OBJECT IDENTIFIER ::= { tnVlanQoSMgmtObjects 4 }
tnVlanServiceMgmt OBJECT IDENTIFIER ::= { tnVlanQoSMgmtObjects 5 }
tnVlanDbMgmt OBJECT IDENTIFIER ::= { tnVlanQoSMgmtObjects 6 }
tnFIDDbMgmt OBJECT IDENTIFIER ::= { tnVlanQoSMgmtObjects 7 }
tnVclMgmt OBJECT IDENTIFIER ::= { tnVlanQoSMgmtObjects 8 }
--
-- Management VLAN
--
tnSysManagmentVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnSysManagmentVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Management VLAN configuration table."
::= { tnSysVlanMgmt 1 }
tnSysManagmentVLANEntry OBJECT-TYPE
SYNTAX TnSysManagmentVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the management VLAN entry on a device."
INDEX { entPhysicalIndex }
::= { tnSysManagmentVLANTable 1 }
TnSysManagmentVLANEntry ::=
SEQUENCE
{
tnSysMgmtVLANStatus INTEGER,
tnSysMgmtVLANId INTEGER,
tnSysMgmtMemberPorts BITS
}
tnSysMgmtVLANStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The device if management VLAN capable, can enable the secure channel
for all its management traffic by setting this variable to enabled(1)."
::= { tnSysManagmentVLANEntry 1 }
tnSysMgmtVLANId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN id, that this device will use for its management traffic.
All Management frames to this device when 'tnSysManagmentVLANStatus'
is set to 'enabled(1)' must be tagged with this VLAN id and all
management frames from this device will be tagged with this VLAN id."
::= { tnSysManagmentVLANEntry 2 }
tnSysMgmtMemberPorts OBJECT-TYPE
SYNTAX BITS { none(0) } -- value added by Jing
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports on this device which are members of this Management VLAN.
This is for security, some ports can be made not a member, which blocks all
management access from this port.
Each bit in this variable represents the logical port number local to the device."
::= { tnSysManagmentVLANEntry 3 }
--
-- TN Switch management information
--
tnSysVLANExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnSysVLANExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"System VLAN external configuration table."
::= { tnSysVlanMgmt 2 }
tnSysVLANExtEntry OBJECT-TYPE
SYNTAX TnSysVLANExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the VLAN config on a device."
INDEX { entPhysicalIndex }
::= { tnSysVLANExtTable 1 }
TnSysVLANExtEntry ::=
SEQUENCE
{
tnSysVlanExtMgmtPortType INTEGER,
tnSysVLANExtCustomSTag OCTET STRING,
tnVlanConfigGlobalsMainAccessVlans0To1K TNVlanListQuarter,
tnVlanConfigGlobalsMainAccessVlans1KTo2K TNVlanListQuarter,
tnVlanConfigGlobalsMainAccessVlans2KTo3K TNVlanListQuarter,
tnVlanConfigGlobalsMainAccessVlans3KTo4K TNVlanListQuarter
}
tnSysVlanExtMgmtPortType OBJECT-TYPE
SYNTAX INTEGER{
unaware(1),
cPort(2),
sPort(3),
sCustomPort(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mib variable is applicable for products that have a out of band management port.
This determines the Port type for all management traffic.It can be one of the following types:
Unaware, C-port, S-port, or S-custom-port where:
- Unaware: The management traffic is untagged or not management vlan.
- C-port: The management vlan is a C-Vlan and TPID 0x8100 is used for out of band management traffic.
- S-port: The management vlan is a S-Vlan and TPID 0x88a8 is used for out of band management traffic.
- S-custom-port: The management vlan is a S-Vlan, which use a custom TPID defined in tnSysVLANExtCustomSTag.
"
::= { tnSysVLANExtEntry 1 }
tnSysVLANExtCustomSTag OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field specifies the Ether type used for Custom S-ports.
This is a global setting and is applicable for all Custom S-ports.
This field is used when TPID other than 0x8100 and 0x88a8 is needed for S-Tags."
::= { tnSysVLANExtEntry 2 }
tnVlanConfigGlobalsMainAccessVlans0To1K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"First quarter of bit-array indicating the enabled access VLANs."
::= { tnSysVLANExtEntry 3 }
tnVlanConfigGlobalsMainAccessVlans1KTo2K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Second quarter of bit-array indicating the enabled access VLANs."
::= { tnSysVLANExtEntry 4 }
tnVlanConfigGlobalsMainAccessVlans2KTo3K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Third quarter of bit-array indicating the enabled access VLANs."
::= { tnSysVLANExtEntry 5 }
tnVlanConfigGlobalsMainAccessVlans3KTo4K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Last quarter of bit-array indicating the enabled access VLANs."
::= { tnSysVLANExtEntry 6 }
-- IP Priority mapping Table
tnSwIPPrioTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnSwIPPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP Traffic class table."
::= { tnDevSysPriorityMgmt 1 }
tnSwIPPrioEntry OBJECT-TYPE
SYNTAX TnSwIPPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the remapped value for each traffic class."
INDEX { tnSwIPPrioIndex }
::= { tnSwIPPrioTable 1 }
TnSwIPPrioEntry ::=
SEQUENCE
{
tnSwIPPrioIndex INTEGER,
tnSwIPPrioTC INTEGER,
tnSwIPPrioRemap INTEGER
}
tnSwIPPrioIndex OBJECT-TYPE
SYNTAX INTEGER (1..11111) -- range added by Jing
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP traffic class remap table index. The indexing is for a bridge entity"
::= { tnSwIPPrioEntry 1 }
tnSwIPPrioTC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP traffic class value."
::= { tnSwIPPrioEntry 2 }
tnSwIPPrioRemap OBJECT-TYPE
SYNTAX INTEGER { pri0(1), pri1(2), pri2(3), pri3(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frames with IP traffic class set, will be remapped to the listed priority queues."
::= { tnSwIPPrioEntry 3 }
-- IEEE Priority mapping Table
tnSwIEEEPrioTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnSwIEEEPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE priority remapping table."
::= { tnDevSysPriorityMgmt 2 }
tnSwIEEEPrioEntry OBJECT-TYPE
SYNTAX TnSwIEEEPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the remapped value for each priority class."
INDEX { tnSwIEEEPriority }
::= { tnSwIEEEPrioTable 1 }
TnSwIEEEPrioEntry ::=
SEQUENCE
{
tnSwIEEEPriority INTEGER,
tnSwIEEEPriorityRemap INTEGER
}
tnSwIEEEPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IEEE tag priority bits in the frame."
::= { tnSwIEEEPrioEntry 1 }
tnSwIEEEPriorityRemap OBJECT-TYPE
SYNTAX INTEGER { pri0(1), pri1(2), pri2(3), pri3(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frames with IEEE priority bits set, will be mapped to the listed priority queues."
::= { tnSwIEEEPrioEntry 2 }
--
-- ION Interface Priority Management
--
tnIfPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIfPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries for interfaces which are capable of Priority management."
::= { tnInterfaceQoSMgmt 1 }
tnIfPriorityEntry OBJECT-TYPE
SYNTAX TnIfPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents Priority configuration."
INDEX { ifIndex }
::= { tnIfPriorityTable 1 }
TnIfPriorityEntry ::=
SEQUENCE
{
tnIfDefaultPriority INTEGER,
tnIfUseIEEEPriority TruthValue,
tnIfUseIPPriority TruthValue,
tnIfUseIPOrIEEEPriority INTEGER,
tnIfSrcMACPriorityRemap TruthValue,
tnIfDstMACPriorityRemap TruthValue,
tnIfVIDPriorityRemap TruthValue
}
tnIfDefaultPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default priority for frames ingressing this port, if it doesnt have any
IEEE 802.3ac tag or any IP TOS/Diffserv traffic class fields."
::= { tnIfPriorityEntry 1 }
tnIfUseIEEEPriority OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the frame is IEEE tagged, and this mib variable is set to 'true',
the 802.1p bits are used as the frames priority."
::= { tnIfPriorityEntry 2 }
tnIfUseIPPriority OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the frame has IP TOS/Diffserv traffic class fields, and this mib variable is
set to 'true'. The traffic class fields will be used as the frame's priority."
::= { tnIfPriorityEntry 3 }
tnIfUseIPOrIEEEPriority OBJECT-TYPE
SYNTAX INTEGER { useIEEE(1), useIP(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the frame has IP TOS/Diffserv traffic class fields, and IEEE 802.3ac tagged, then
this mib variable decides which one is to be considered as the frame's priority."
::= { tnIfPriorityEntry 4 }
tnIfSrcMACPriorityRemap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true(1), a frame's Source MAC address decides the priority of the frame.
The new priority value is assigned based on the priority assigned to that MAC address
in the MAC forwarding database."
::= { tnIfPriorityEntry 5 }
tnIfDstMACPriorityRemap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true(1), a frame's Destination MAC address decides the priority of the frame.
The new priority value is assigned based on the priority assigned to that MAC address
in the MAC forwarding database."
::= { tnIfPriorityEntry 6 }
tnIfVIDPriorityRemap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true(1), a frame's VLAN id decides the priority of the frame.
The new priority value is assigned based on the priority assigend to that VLAN id
in the VLAN database."
::= { tnIfPriorityEntry 7 }
--
-- ION Interface Priority remapping
--
tnIfPriorityRemapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIfPriorityRemapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries for each interface's IEEE priority remapping."
::= { tnInterfaceQoSMgmt 2 }
tnIfPriorityRemapEntry OBJECT-TYPE
SYNTAX TnIfPriorityRemapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents Priority remapping for an interface."
INDEX { ifIndex, tnIfUserPriority }
::= { tnIfPriorityRemapTable 1 }
TnIfPriorityRemapEntry ::=
SEQUENCE
{
tnIfUserPriority INTEGER,
tnIfRemappedPriority INTEGER
}
tnIfUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority found in the frames ingressing this interface.
Frames which are untagged take up the interface's priority."
::= { tnIfPriorityRemapEntry 1 }
tnIfRemappedPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame's priority is remapped to this new priority value.
Frames that egress tagged will have the remapped priority."
::= { tnIfPriorityRemapEntry 2 }
--
-- ION Interface VLAN Management
--
tnIfVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIfVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries for interfaces which are VLAN capable."
::= { tnInterfaceVlanMgmt 1 }
tnIfVLANEntry OBJECT-TYPE
SYNTAX TnIfVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents VLAN configuration on an interface."
INDEX { ifIndex }
::= { tnIfVLANTable 1 }
TnIfVLANEntry ::=
SEQUENCE
{
tnIfDot1qState INTEGER,
tnIfDiscardTagged TruthValue,
tnIfDiscardUntagged TruthValue,
tnIfDefaultVlanId INTEGER,
tnIfForceDefaultVlanId TruthValue
}
tnIfDot1qState OBJECT-TYPE
SYNTAX INTEGER { vlanEnabled(1), vlanDisabled(2) }
MAX-ACCESS read-write
STATUS current
-- SYNTAX INTEGER { vlanDisabled(1), fallback(2), check(3), secure(4) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The IEEE 802.1Q status of this inteface.
-- vlanDisabled - 802.1Q is disabled.
-- fallback - The frame is not discarded if the Vlan Id is not in the VLAN Database. It is forwarded normally.
-- check - The Vlan Id must be in the VLAN Database, the ingress port may or may not be a member.
-- If the Vlan Id is not in the VLAN Database, it is discarded.
-- secure - The Vlan Id must be in the VLAN Database and the ingresss port should be a member
-- of the VLAN, else it is discarded.
-- In all the three cases when 802.1Q is enabled, the frame is allowed to egress only port is a member of the VLAN."
DESCRIPTION
"The IEEE802.1Q status of this interface."
::= { tnIfVLANEntry 1 }
tnIfDiscardTagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This filters all tagged non-management frames ingressing this port.
All untagged and priority tagged frames are processed as normal frames."
::= { tnIfVLANEntry 2 }
tnIfDiscardUntagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This filters all untagged and priority tagged non-management frames
ingressing this port. All frames .1Q tagged frames are processed as normal frames."
::= { tnIfVLANEntry 3 }
tnIfDefaultVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface's default Vlan id. This VLAN id is given to untagged frames on ingress into
the device."
::= { tnIfVLANEntry 4 }
tnIfForceDefaultVlanId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This forces all untagged and (802.1Q)tagged frames to take up the interface's ionIfDefaultVlanId."
::= { tnIfVLANEntry 5 }
--
-- Tagging options at Port Level
--
tnIfVLANTagMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIfVLANTagMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries for interfaces which are VLAN capable."
::= { tnInterfaceVlanMgmt 2 }
tnIfVLANTagMgmtEntry OBJECT-TYPE
SYNTAX TnIfVLANTagMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents VLAN configuration on an interface."
INDEX { ifIndex }
::= { tnIfVLANTagMgmtTable 1 }
TnIfVLANTagMgmtEntry ::=
SEQUENCE
{
tnIfFrameTagMode INTEGER,
tnIfProviderEtherType INTEGER,
tnIfNetworkModeTagging INTEGER
}
tnIfFrameTagMode OBJECT-TYPE
SYNTAX INTEGER { network(1), provider(2), customer(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface's taggin mode. The interface can be set as :
network(1) - This is the normal network mode. It can take untagged
and 802.3ac tagged frames. In this mode, 802.1q can be
enabled on the interface. Frames with an ethertype of
0x8100 is considered as tagged.
provider(2) - In provider mode, frames are considered
provider tagged if it matches the 'ionIfProviderEtherType'.
Frames which are ingress with a provider tag, are stripped
of their provider tag on egressing this interface.
If the frame's ethertype doesnt match the 'ionIfProviderEtherType'
it is as untagged.
customer(3) - The customer mode is a normal access port which is not 802.1Q aware.
"
::= { tnIfVLANTagMgmtEntry 1 }
tnIfProviderEtherType OBJECT-TYPE
SYNTAX INTEGER { x8100(1), x9100(2), x88a8(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This ether type is used when an interface is set to 'provider' mode.
Frames are considered tagged only if the ether type matches this value."
::= { tnIfVLANTagMgmtEntry 2 }
tnIfNetworkModeTagging OBJECT-TYPE
SYNTAX INTEGER { unmodified(1), removeTag(2), addTag(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is available only when 'ionIfFrameTagMode' is set to 'network(1)' mode.
In unmodified(1) - Frames are unmodified, the egress the same as they ingress this interface
removeTag(2) - Tagged frames are stripped of their tag, and are transmitted untagged
addTag(3) - Untagged frames get tagged when they egress this interface."
::= { tnIfVLANTagMgmtEntry 3 }
tnIfVLANTagMgmt2Table OBJECT-TYPE
SYNTAX SEQUENCE OF TnIfVLANTagMgmt2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries for interfaces which are VLAN capable."
::= { tnInterfaceVlanMgmt 3 }
tnIfVLANTagMgmt2Entry OBJECT-TYPE
SYNTAX TnIfVLANTagMgmt2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents VLAN configuration on an interface."
INDEX { ifIndex }
::= { tnIfVLANTagMgmt2Table 1 }
TnIfVLANTagMgmt2Entry ::=
SEQUENCE
{
tnIfVLANTagMgmt2PortType INTEGER,
tnIfVLANTagMgmt2TxTagType INTEGER,
tnIfVLANTagMgmt2ConfigConflicts INTEGER,
tnVlanConfigInterfaceMode INTEGER,
tnVlanConfigInterfaceAllowVlans0KTo1K TNVlanListQuarter,
tnVlanConfigInterfaceAllowVlans1KTo2K TNVlanListQuarter,
tnVlanConfigInterfaceAllowVlans2KTo3K TNVlanListQuarter,
tnVlanConfigInterfaceAllowVlans3KTo4K TNVlanListQuarter,
tnVlanConfigInterfaceForbiddenVlans0KTo1K TNVlanListQuarter,
tnVlanConfigInterfaceForbiddenVlans1KTo2K TNVlanListQuarter,
tnVlanConfigInterfaceForbiddenVlans2KTo3K TNVlanListQuarter,
tnVlanConfigInterfaceForbiddenVlans3KTo4K TNVlanListQuarter
}
tnIfVLANTagMgmt2PortType OBJECT-TYPE
SYNTAX INTEGER{
unaware(1),
cPort(2),
sPort(3),
sCustomPort(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Port can be one of the following types: Unaware, C-port, S-port, or S-custom-port where:
- Unaware: all frames are classified to the Port VLAN ID and tags are not removed (default).
- C-port: Customer port; with Customer tags (C-Tags), which use TPID 0x8100.
- S-port: Service port; with Service tags (S-Tags), which use TPID 0x88A8 (IEEE 802.1ad).
- S-custom-port: Custom Service port; with Service tags (S-Tags), which use a custom TPID assigned
in tnSysVLANExtCustomSTag.
For Customer tags and Service tags, both VLAN tags (tags with non-zero VID) and Priority tags (tags with
VID = 0) are processed.
The tag header is either retrieved from a tag in the incoming frame or from a default port-based tag header.
The port-based tag header is configured in ieee8021QBridgePvid.
For double-tagged frames, there is an option to use the inner tag instead of the outer tag.
In addition to the tag header, the ingress port decides the number of VLAN tags to pop at egress. If the
configured number of tags to pop is greater than the actual number of tags in the frame, the number is
reduced to the actual number of tags in the frame. "
::= { tnIfVLANTagMgmt2Entry 1 }
tnIfVLANTagMgmt2TxTagType OBJECT-TYPE
SYNTAX INTEGER {
untagPvid(1),
tagAll(2),
untagAll(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines egress tagging on a port:
- Untag_pvid - All frames with classified VLAN as the PVID egress as untagged frames.
- Tag_all - All frames which do not have a tag with classified vlan are tagged on egress.
An extra tag with ingress port PVID is added if the frames are already tagged.
- Untag_all - All frames tagged with the classified vlan id are untagged on egress."
::= { tnIfVLANTagMgmt2Entry 2 }
tnIfVLANTagMgmt2ConfigConflicts OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the status of Conflicts whether one exists or not. When a Volatile VLAN User requests to set VLAN
membership or VLAN port configuration, the following conflicts can occur:
- Functional Conflicts between features.
- Conflicts due to hardware limitation.
- Direct conflict between user modules. "
::= { tnIfVLANTagMgmt2Entry 3 }
tnVlanConfigInterfaceMode OBJECT-TYPE
SYNTAX INTEGER { access(1), trunk(2), hybrid(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the underlying port mode.
Access ports are only members of one VLAN, the AccessVlan.
Trunk ports are by default members of all VLANs, which can be limited
with TrunkVlans.
Hybrid ports allow for changing all port VLAN parameters. As trunk
ports, hybrid ports are by default members of all VLANs, which can be
limited with HybridVlans."
::= { tnIfVLANTagMgmt2Entry 4 }
tnVlanConfigInterfaceAllowVlans0KTo1K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"First quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid."
::= { tnIfVLANTagMgmt2Entry 5 }
tnVlanConfigInterfaceAllowVlans1KTo2K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Second quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid."
::= { tnIfVLANTagMgmt2Entry 6 }
tnVlanConfigInterfaceAllowVlans2KTo3K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Third quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid."
::= { tnIfVLANTagMgmt2Entry 7 }
tnVlanConfigInterfaceAllowVlans3KTo4K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Last quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid."
::= { tnIfVLANTagMgmt2Entry 8 }
tnVlanConfigInterfaceForbiddenVlans0KTo1K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"First quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes."
::= { tnIfVLANTagMgmt2Entry 9 }
tnVlanConfigInterfaceForbiddenVlans1KTo2K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Second quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes."
::= { tnIfVLANTagMgmt2Entry 10 }
tnVlanConfigInterfaceForbiddenVlans2KTo3K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Third quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes."
::= { tnIfVLANTagMgmt2Entry 11 }
tnVlanConfigInterfaceForbiddenVlans3KTo4K OBJECT-TYPE
SYNTAX TNVlanListQuarter
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Last quarter of bit-array indicating whether the port can ever become a
member of a VLAN ('0') or not ('1'). Used in all modes."
::= { tnIfVLANTagMgmt2Entry 12 }
--
-- VLAN service configuration for a 2-port ION device
--
tnVlanServiceConnType OBJECT-TYPE
SYNTAX INTEGER { customerProvider(1), providerCustomer(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This defines the VLAN service type. The connection specified Port 1 and Port 2 configuration.
customerProvider(1) : This sets the Port 1 to be customer facing port and Port 2 to be provider facing port.
providerCustomer(2) : This sets the Port 1 to be provider facing port and Port 2 to be customer facing port.
"
::= { tnVlanServiceMgmt 1 }
tnVlanServiceVIDForTag OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Vlan id will be used when the service translation requires an extra tag to be added."
::= { tnVlanServiceMgmt 2 }
tnVlanServiceEtherTypeForTag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Ethertype will be used when the service translation requires an extra tag to be added.
Typical values are 0x8100 for IEEE 802.1Q tags, 0x88a8 for IEEE 802.1ad S-tags or other 2 byte private ethertype."
::= { tnVlanServiceMgmt 3 }
tnVlanServiceTranslation OBJECT-TYPE
SYNTAX TnVlanServiceTranslationType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This determines the service or flow type between the two terminations.
The translation type as the flow passes the termination points from Customer edge to provider edge
are detailed below :
<----- Provider Side -----> <----- Customer Side ----->
Device
+------------------------------+
----> | P | | P | ---->
----> | o | | o | ---->
<---- | r | | r | <----
<---- | t | | t | <----
|(PE)| |(CE)|
+------------------------------+
noTranslation(1) :-
The ingress flow might contain any kind of frames, untagged or single or double tagged.
The egress flow will be exactly the same, no translation is done.
untaggedUntagged(2) :-
The traffic should be untagged, all tagged frames will be discarded.
The traffic that egress the device contain the untagged flow without any modification.
untaggedSingleTagged(3) :-
At the CE the traffic should be untagged.
At the PE the traffic will contain a single tag with the VID specified in tnVlanServiceVIDForTag.
singleTaggedSingleTagged(4) :-
The traffic should be single tagged on ingress and on egress with no translation.
singleTaggedTranslation(5) :-
The traffic should be single tagged on ingress and on egress.
The only changes from the singleTaggedSingleTagged(4), there is a translation.
The Vlan Id that came on ingress is translated to a different Vlan Id on egress.
singleTaggedDoubleTagged(6) :-
At the CE the traffic should be single tagged.
At the PE the traffic will contain an extra tag with the VID specified in tnVlanServiceVIDForTag.
doubleTaggedDoubleTagged(7) :-
The traffic should be double tagged on ingress and on egress with no translation.
doubleTaggedTranslation(8) :-
The traffic should be double tagged on ingress and on egress.
The only changes from the doubleTaggedDoubleTagged(7), there is a translation.
The Vlan Id in outer tag that came on CE is translated to a different Vlan Id on PE.
The inner tag remains intact.
addProviderTag(9) :-
This option adds an extra tag on the PE interface, no matter what kind of traffic at CE.
This strips the outer tag for traffic from PE interface egressing the CE interface.
"
::= { tnVlanServiceMgmt 4 }
--
-- VLAN database
--
tnVLANDbTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnVLANDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all VLAN entries for this bridge."
::= { tnVlanDbMgmt 1 }
tnVLANDbEntry OBJECT-TYPE
SYNTAX TnVLANDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents a VLAN and the interfaces that are members of that VLAN."
INDEX { tnVlanDbVID }
::= { tnVLANDbTable 1 }
TnVLANDbEntry ::=
SEQUENCE
{
tnVlanDbVID VlanIndex,
tnVlanDbFID INTEGER,
tnVlanDbVIDPriOverride INTEGER,
tnVlanDbVIDPriority INTEGER,
tnVlanDbMemTagPort1 INTEGER,
tnVlanDbMemTagPort2 INTEGER,
tnVlanDbMemTagPort3 INTEGER,
tnVlanDbMemTagPort4 INTEGER,
tnVlanDbMemTagPort5 INTEGER,
tnVlanDbMemTagPort6 INTEGER,
tnVlanDbMemTagPort7 INTEGER,
tnVlanDbMemTagPort8 INTEGER,
tnVlanDbMemTagPort9 INTEGER,
tnVlanDbMemTagPort10 INTEGER,
tnVlanDbRowStatus RowStatus
}
tnVlanDbVID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of the entry."
::= { tnVLANDbEntry 1 }
tnVlanDbFID OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Forwarding Database number for this VLAN."
::= { tnVLANDbEntry 2 }
tnVlanDbVIDPriOverride OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Override Priority on frames assosicated with this VID."
::= { tnVLANDbEntry 3 }
tnVlanDbVIDPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Priority for frames assosicated with this VID."
::= { tnVLANDbEntry 4 }
tnVlanDbMemTagPort1 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 1.
memEgressNoMode(1)- Port 1 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 1 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 1 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 1 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 5 }
tnVlanDbMemTagPort2 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 2.
memEgressNoMode(1)- Port 2 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 2 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 2 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 2 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 6 }
tnVlanDbMemTagPort3 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 3.
memEgressNoMode(1)- Port 3 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 3 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 3 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 3 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 7 }
tnVlanDbMemTagPort4 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 4.
memEgressNoMode(1)- Port 4 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 4 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 4 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 4 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 8 }
tnVlanDbMemTagPort5 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 5.
memEgressNoMode(1)- Port 5 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 5 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 5 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 5 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 9 }
tnVlanDbMemTagPort6 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 6.
memEgressNoMode(1)- Port 6 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 6 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 6 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 6 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 10 }
tnVlanDbMemTagPort7 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 7.
memEgressNoMode(1)- Port 7 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 7 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 7 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 7 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 11 }
tnVlanDbMemTagPort8 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 8.
memEgressNoMode(1)- Port 8 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 8 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 8 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 8 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 12 }
tnVlanDbMemTagPort9 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 9.
memEgressNoMode(1)- Port 9 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 9 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 9 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 9 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 13 }
tnVlanDbMemTagPort10 OBJECT-TYPE
SYNTAX INTEGER { memEgressNoMod(1), memEgressNoTag(2), memEgressTag(3), notMember(4), notApplicable(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Membership and Egress Tagging on Logical Port 10.
memEgressNoMode(1)- Port 10 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 10 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 10 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 10 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port."
::= { tnVLANDbEntry 14 }
tnVlanDbRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this VLAN entry in the VLAN database."
::= { tnVLANDbEntry 15 }
tnVLANDbFlush OBJECT IDENTIFIER ::= { tnVlanDbMgmt 2 }
tnVLANDbFlushOperation OBJECT-TYPE
SYNTAX INTEGER
{
doNothing(1),
flushAll(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this viarable to:
flushAll(2): flush all VLAN entries except default VLAN 1.
This variable can't be set if the 'tnVLANDbFlushOperationStatus'
is 'inProgress(4)'.
Do getting to this variable:
If an operation is being processed, the operation being processed is returned.
If no operation is being processed, 'doNothing(1)' is returned."
::= { tnVLANDbFlush 1 }
tnVLANDbFlushOperationStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3),
inProgress(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN database flush operation status.
unknown(1): no flush operation has been performed.
success(2)/failure(3): the last flush operation is finished, success(2)
indicates the last flush operation is successful. failure(3)
indicates the last flush operation fails.
inProgress(4): flush operation is in progress."
::= { tnVLANDbFlush 2 }
tnVLANDbFlushOperationFailureReason OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the description of the cause of 'failure(3)' state of the
object 'tnVLANDbFlushOperationStatus'. This object would be a null
string if value of 'tnVLANDbFlushOperationStatus' is anything other
than 'failure(3)'."
::= { tnVLANDbFlush 3 }
--
-- Forwarding database
--
tnFIDDbTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnFIDDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The forwarding/filtering address database for this device."
::= { tnFIDDbMgmt 1 }
tnFIDDbEntry OBJECT-TYPE
SYNTAX TnFIDDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a particular MAC address."
INDEX { tnFIDDbID, tnFIDDbMacAddress }
::= { tnFIDDbTable 1 }
TnFIDDbEntry ::=
SEQUENCE {
tnFIDDbID INTEGER,
tnFIDDbMacAddress MacAddress,
tnFIDDbConnPort INTEGER,
tnFIDDbPriority INTEGER,
tnFIDDbEntryType INTEGER,
tnFIDDbEntryStatus RowStatus
}
tnFIDDbID OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Forwarding Database Number. This identifies the database."
::= { tnFIDDbEntry 2 }
tnFIDDbMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unicast or multicast MAC address that the device has forwarding information."
::= { tnFIDDbEntry 3 }
tnFIDDbConnPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The index of the logical Port from which the device received the 'tnFIDDbMacAddress'."
::= { tnFIDDbEntry 4 }
tnFIDDbPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The priority of this MAC entry."
::= { tnFIDDbEntry 5 }
tnFIDDbEntryType OBJECT-TYPE
SYNTAX INTEGER { static(1), staticNRL(2), staticPA(3), dynamic(4) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Entry state of this unicast or multicast entry.
The types represent :
static(1) - A Valid entry that doesnot age.
staticNRL(2) - A static entry that has no ingress rate limiting.
staticPA(3) - A static entry that has priority override enabled.
dynamic(4) - A valid entry with no special attributes which
ages and finally removed from the database.
A unicast entry can be static(1) or staticPA(3) but not
staticNRL(2). For MAC address which are learned, the read-only value
of dynamic(4) is returned."
::= { tnFIDDbEntry 6 }
tnFIDDbEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this entry."
::= { tnFIDDbEntry 7 }
tnFIDDbFlush OBJECT IDENTIFIER ::= { tnFIDDbMgmt 2 }
tnFIDDbFlushFID OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When 'tnFIDDbFlushOperation' is 'flushAllFID(3)' or 'flushAllDynamicFID(4)',
the value(1..4094) of this viarable is used to specify the FID to be flushed.
The value 0 of this virable means no FID is specified."
::= { tnFIDDbFlush 1 }
tnFIDDbFlushOperation OBJECT-TYPE
SYNTAX INTEGER
{
doNothing(1),
flushAll(2),
flushAllDynamic(3),
flushAllFID(4),
flushAllDynamicFID(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this viarable to:
flushAll(2): flush all FID entries for all FIDs.
flushAllDynamic(3): flush all FID dynamic entries for all FIDs.
flushAllFID(4): flush all FID entries for one FID which is specified
by ionFIDDbFlushFID.
flushAllDynamicFID(5): flush all FID dynamic entries for one FID which
is specified by ionFIDDbFlushFID.
This variable can't be set if the 'ionFIDDbFlushOperationStatus'
is 'inProgress(4)'.
Do getting to this variable:
If an operation is being processed, the operation being processed is returned.
If no operation is being processed, 'doNothing(1)' is returned."
::= { tnFIDDbFlush 2 }
tnFIDDbFlushOperationStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3),
inProgress(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The FID database flush operation status.
unknown(1): no flush operation has been performed.
success(2)/failure(3): the last flush operation is finished, success(2)
indicates the last flush operation is successful. failure(3)
indicates the last flush operation fails.
inProgress(4): flush operation is in progress."
::= { tnFIDDbFlush 3 }
tnFIDDbFlushOperationFailureReason OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the description of the cause of 'failure(3)' state of the
object 'ionFIDDbFlushOperationStatus'. This object would be a null
string if value of 'ionFIDDbFlushOperationStatus' is anything other
than 'failure(3)'."
::= { tnFIDDbFlush 4 }
--
-- VLAN Control List
--
tnVclMacBasedMgmt OBJECT IDENTIFIER ::= { tnVclMgmt 1 }
tnVclProtoBasedMgmt OBJECT IDENTIFIER ::= { tnVclMgmt 2 }
tnVclIpSubnetBasedMgmt OBJECT IDENTIFIER ::= { tnVclMgmt 3 }
--
-- Mac based Vlan
--
tnVclMacBasedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnVclMacBasedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to control MAC based Vlan functions."
::= { tnVclMacBasedMgmt 1 }
tnVclMacBasedEntry OBJECT-TYPE
SYNTAX TnVclMacBasedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table is used to control MAC based Vlan functions."
INDEX { tnVclMacBasedMacAddr }
::= { tnVclMacBasedTable 1 }
TnVclMacBasedEntry ::=
SEQUENCE
{
tnVclMacBasedMacAddr MacAddress,
tnVclMacBasedVlanId VlanIndex,
tnVclMacBasedPortMember PortList,
tnVclMacBasedUser INTEGER,
tnVclMacBasedRowStatus RowStatus
}
tnVclMacBasedMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address is used for the MAC based VLAN function classification key."
::= { tnVclMacBasedEntry 1 }
tnVclMacBasedVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific MAC address and port member list."
::= { tnVclMacBasedEntry 2 }
tnVclMacBasedPortMember OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The member port list of this specific MAC based Vlan match process takes place."
::= { tnVclMacBasedEntry 3 }
tnVclMacBasedUser OBJECT-TYPE
SYNTAX INTEGER{
static(1),
nas(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The creater of this entry. The MAC based VLAN entry is either created by user configuration(static), or by NAS dynamic creation(nas)."
::= { tnVclMacBasedEntry 4 }
tnVclMacBasedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry."
::= { tnVclMacBasedEntry 5 }
--
-- Protocol Based Vlan
--
tnVclProtoBasedGroupMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnVclProtoBasedGroupMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to build a specific protocol group for VCL match process."
::= { tnVclProtoBasedMgmt 1 }
tnVclProtoBasedGroupMapEntry OBJECT-TYPE
SYNTAX TnVclProtoBasedGroupMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in this table is used to build a specific protocol group for VCL match process."
-- INDEX { IMPLIED tnVclProtoBasedGroupMapName }
INDEX { tnVclProtoBasedGroupMapName }
::= { tnVclProtoBasedGroupMapTable 1 }
TnVclProtoBasedGroupMapEntry ::=
SEQUENCE
{
tnVclProtoBasedGroupMapName SnmpAdminString,
tnVclProtoBasedGroupMapProtocol INTEGER,
tnVclProtoBasedGroupMapEtherTypeVal INTEGER,
tnVclProtoBasedGroupMapSnapOui EightOTwoOui,
tnVclProtoBasedGroupMapSnapPid INTEGER,
tnVclProtoBasedGroupMapLlcDsap INTEGER,
tnVclProtoBasedGroupMapLlcSsap INTEGER,
tnVclProtoBasedGroupMapRowStatus RowStatus
}
tnVclProtoBasedGroupMapName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The locally arbitrary, but unique identifier associated with this TnVclProtoBasedGroupMapEntry."
::= { tnVclProtoBasedGroupMapEntry 1 }
tnVclProtoBasedGroupMapProtocol OBJECT-TYPE
SYNTAX INTEGER{
ethernet(1),
snap(2),
llc(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Frame Type can have one of the following values:
1. Ethernet
2. SNAP
3. LLC"
::= { tnVclProtoBasedGroupMapEntry 2 }
tnVclProtoBasedGroupMapEtherTypeVal OBJECT-TYPE
SYNTAX INTEGER(1536..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ethernet Type is valid only if the tnVclProtoBasedGroupMapProtocol is ethernet(1). Valid values for etype ranges is from 0x0600-0xffff.
If tnVclProtoBasedGroupMapProtocol is not ethernet(1), this value will be 0xffff instead."
::= { tnVclProtoBasedGroupMapEntry 3 }
tnVclProtoBasedGroupMapSnapOui OBJECT-TYPE
SYNTAX EightOTwoOui
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNAP OUI is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2). OUI (Organizationally Unique Identifier) is value in
format of xx-xx-xx where each pair (xx) in string is a hexadecimal value ranges from 0x00-0xff.
If tnVclProtoBasedGroupMapProtocol is not snap(2), this value will be FF-FF-FF instead."
::= { tnVclProtoBasedGroupMapEntry 4 }
tnVclProtoBasedGroupMapSnapPid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNAP PID is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2).
If the OUI is hexadecimal 000000, the protocol ID is the Ethernet type (EtherType) field value for the protocol running on top of SNAP;
if the OUI is an OUI for a particular organization, the protocol ID is a value assigned by that organization to the protocol
running on top of SNAP.
In other words, if value of OUI field is 00-00-00 then value of PID will be etype (0x0600-0xffff) and
if value of OUI is other than 00-00-00 then valid value of PID will be any value from 0x0000 to 0xffff.
If tnVclProtoBasedGroupMapProtocol is not snap(2), this value will be 0xffff instead."
::= { tnVclProtoBasedGroupMapEntry 5 }
tnVclProtoBasedGroupMapLlcDsap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"LLC DSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3).
DSAP: 1-byte long string (0x00-0xff).
If tnVclProtoBasedGroupMapProtocol is not llc(3), this value will be 0xff instead."
::= { tnVclProtoBasedGroupMapEntry 6 }
tnVclProtoBasedGroupMapLlcSsap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"LLC SSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3).
SSAP: 1-byte long string (0x00-0xff).
If tnVclProtoBasedGroupMapProtocol is not llc(3), this value will be 0xff instead."
::= { tnVclProtoBasedGroupMapEntry 7 }
tnVclProtoBasedGroupMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry."
::= { tnVclProtoBasedGroupMapEntry 8 }
--
--
tnVclProtoBasedVlanMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnVclProtoBasedVlanMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to associate the protocol based VLAN groups with VLAN paramaters."
::= { tnVclProtoBasedMgmt 2 }
tnVclProtoBasedVlanMapEntry OBJECT-TYPE
SYNTAX TnVclProtoBasedVlanMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in this table is used to associate the protocol based VLAN groups with VLAN paramaters."
INDEX { IMPLIED tnVclProtoBasedGroupMapName, tnVclProtoBasedVlanMapVlanId }
::= { tnVclProtoBasedVlanMapTable 1 }
TnVclProtoBasedVlanMapEntry ::=
SEQUENCE
{
tnVclProtoBasedVlanMapVlanId VlanIndex,
tnVclProtoBasedVlanMapPortMember PortList,
tnVclProtoBasedVlanMapRowStatus RowStatus
}
tnVclProtoBasedVlanMapVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific Protocol Group and port member list."
::= { tnVclProtoBasedVlanMapEntry 1 }
tnVclProtoBasedVlanMapPortMember OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The member port list of this specific Protocol based Vlan match process takes place."
::= { tnVclProtoBasedVlanMapEntry 2 }
tnVclProtoBasedVlanMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry."
::= { tnVclProtoBasedVlanMapEntry 3 }
--
-- IP subnet based Vlan
--
tnVclIpSubnetBasedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnVclIpSubnetBasedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Table is used to control IP subnet based VLAN functions."
::= { tnVclIpSubnetBasedMgmt 1 }
tnVclIpSubnetBasedEntry OBJECT-TYPE
SYNTAX TnVclIpSubnetBasedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in this table is used to control IP subnet based VLAN functions."
INDEX { tnVclIpSubnetBasedVceId }
::= { tnVclIpSubnetBasedTable 1 }
TnVclIpSubnetBasedEntry ::=
SEQUENCE
{
tnVclIpSubnetBasedVceId INTEGER,
tnVclIpSubnetBasedIpAddr IpAddress,
tnVclIpSubnetBasedMaskLen INTEGER,
tnVclIpSubnetBasedVlanId VlanIndex,
tnVclIpSubnetBasedPortMember PortList,
tnVclIpSubnetBasedRowStatus RowStatus
}
tnVclIpSubnetBasedVceId OBJECT-TYPE
SYNTAX INTEGER (1..11111) -- range added by Jing
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the entry. The valid range is implement specific.
If VCE ID is 0, application will auto-generate the VCE ID for that entry."
::= { tnVclIpSubnetBasedEntry 1 }
tnVclIpSubnetBasedIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the IP address for match process."
::= { tnVclIpSubnetBasedEntry 2 }
tnVclIpSubnetBasedMaskLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the network mask length."
::= { tnVclIpSubnetBasedEntry 3 }
tnVclIpSubnetBasedVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific IP subnet and port member list."
::= { tnVclIpSubnetBasedEntry 4 }
tnVclIpSubnetBasedPortMember OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The member port list of this specific IP subnet based Vlan match process takes place."
::= { tnVclIpSubnetBasedEntry 5 }
tnVclIpSubnetBasedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry."
::= { tnVclIpSubnetBasedEntry 6 }
--
-- NOTIFICATIONS FOR THIS MIB
--
tnIfSourceAddrChangeEvt NOTIFICATION-TYPE
OBJECTS {
tnFIDDbMacAddress, tnFIDDbConnPort
}
STATUS current
DESCRIPTION
"A tnIfSourceAddrChangeEvt event is sent when the tnIfSourceAddrLock is set to 'true',
the ionIfSourceAddrLockAction is set to 'discardAndNotify' or 'all' and there is an
intrusion/SA change on this port."
::= { tnVlanQoSMgmtNotifications 1 }
END
Reference in a new issue View git blame Copy permalink