Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2314 lines
82 KiB
Text
2314 lines
82 KiB
Text
-- *****************************************************************
|
|
-- TN-EVC-MIB.my : TN Ethernet Virtual Connection MIB
|
|
--
|
|
-- Copyright (c) 2014 by Transition Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
TN-EVC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Counter64
|
|
FROM SNMPv2-SMI
|
|
InetAddress FROM INET-ADDRESS-MIB
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
entPhysicalIndex FROM ENTITY-MIB
|
|
TEXTUAL-CONVENTION,
|
|
TruthValue,
|
|
RowStatus,
|
|
MacAddress,
|
|
StorageType
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
VlanId,
|
|
VlanIdOrAny,
|
|
VlanIdOrNone,
|
|
VlanIdOrAnyOrNone,
|
|
PortList
|
|
FROM Q-BRIDGE-MIB
|
|
ifIndex,
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
tnProducts
|
|
FROM TRANSITION-SMI;
|
|
|
|
tnEvcMib MODULE-IDENTITY
|
|
LAST-UPDATED "201405060000Z"
|
|
ORGANIZATION "Transition Networks, Inc."
|
|
CONTACT-INFO
|
|
"Transition Networks
|
|
Technical Support
|
|
|
|
10900 Red Circle Drive
|
|
Minnetonka, MN 55343 USA
|
|
Tel: +1-800-526-9267
|
|
|
|
E-mail: techsupport@transition.com"
|
|
DESCRIPTION
|
|
"TBD"
|
|
REVISION "201204200000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
REVISION "201207060000Z"
|
|
DESCRIPTION
|
|
"Add L2CP to the mib."
|
|
REVISION "201401090000Z"
|
|
DESCRIPTION
|
|
"Add tnEvcName to MIB module."
|
|
REVISION "201405060000Z"
|
|
DESCRIPTION
|
|
"Add Serval MIBs to MIB module."
|
|
::= { tnProducts 106 }
|
|
|
|
tnEvcObjects OBJECT IDENTIFIER
|
|
::= { tnEvcMib 1 }
|
|
|
|
tnEvcCfgMgmtGroup OBJECT IDENTIFIER ::= { tnEvcObjects 1 }
|
|
tnEvcStatGroup OBJECT IDENTIFIER ::= { tnEvcObjects 2 }
|
|
tnEvcL2cpMgmtGroup OBJECT IDENTIFIER ::= { tnEvcObjects 3 }
|
|
|
|
-- EVC port table
|
|
|
|
tnEvcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnEvcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table displays and sets current EVC port configurations.
|
|
|
|
This table has a sparse depedent relationship on the ifTable,
|
|
containing a row for each ifEntry having an ifType of
|
|
'ethernetCsmacd' capable of supporting Ethernet services."
|
|
::= { tnEvcCfgMgmtGroup 1 }
|
|
|
|
tnEvcPortEntry OBJECT-TYPE
|
|
SYNTAX TnEvcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents an EVC port configuration."
|
|
INDEX { ifIndex }
|
|
::= { tnEvcPortTable 1 }
|
|
|
|
TnEvcPortEntry ::= SEQUENCE {
|
|
tnEvcPortDEIMode INTEGER,
|
|
tnEvcPortTagMode INTEGER,
|
|
tnEvcPortAddressMode INTEGER
|
|
}
|
|
|
|
tnEvcPortDEIMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
coloured(1),
|
|
fixed(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DEI mode for an NNI port determines whether frames transmitted on the port will have the DEI field
|
|
in the outer tag marked based on the colour of the frame. The allowed values are:
|
|
|
|
'coloured':
|
|
The DEI is 1 for yellow frames and 0 for green frames.
|
|
|
|
'fixed':
|
|
The DEI value is determined by ECE rules.
|
|
"
|
|
::= { tnEvcPortEntry 1 }
|
|
|
|
tnEvcPortTagMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inner(1),
|
|
outer(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag type is used to determine whether an inner tag is inserted in frames
|
|
forwarded to NNI ports. The possible values are:
|
|
|
|
'inner':
|
|
An inner tag is not inserted.
|
|
|
|
'outer':
|
|
An inner C-tag is inserted.
|
|
"
|
|
::= { tnEvcPortEntry 2 }
|
|
|
|
tnEvcPortAddressMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
source(1),
|
|
destination(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP/MAC address mode specifying whether the EVC classification must be based on
|
|
source (SMAC/SIP) or destination (DMAC/DIP) addresses. The allowed values are:
|
|
'source':
|
|
Enable SMAC/SIP matching.
|
|
'destination':
|
|
Enable DMAC/DIP matching.
|
|
"
|
|
::= { tnEvcPortEntry 3 }
|
|
|
|
|
|
-- EVC tables
|
|
|
|
tnEvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnEvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the configuration of EVC(Ethernet Virtual Circuit)."
|
|
::= { tnEvcCfgMgmtGroup 2 }
|
|
|
|
tnEvcEntry OBJECT-TYPE
|
|
SYNTAX TnEvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents an EVC.
|
|
|
|
Each entry in this table represents an EVC and can be created or deleted
|
|
by the management system."
|
|
INDEX { tnEvcIndex }
|
|
::= { tnEvcTable 1 }
|
|
|
|
TnEvcEntry ::= SEQUENCE {
|
|
tnEvcIndex INTEGER,
|
|
tnEvcNNIPortlist PortList,
|
|
tnEvcVid VlanIdOrAny,
|
|
tnEvcIVid VlanIdOrAny,
|
|
tnEvcLearning INTEGER,
|
|
tnEvcInnerTagType INTEGER,
|
|
tnEvcInnerVidMode INTEGER,
|
|
tnEvcInnerVid VlanIdOrAnyOrNone,
|
|
tnEvcInnerPCPDEIPreservation INTEGER,
|
|
tnEvcInnerPCP INTEGER,
|
|
tnEvcInnerDEI INTEGER,
|
|
tnEvcOuterVid VlanIdOrAnyOrNone,
|
|
tnEvcStatus RowStatus,
|
|
tnEvcPolicerID INTEGER,
|
|
tnEvcName OCTET STRING
|
|
}
|
|
|
|
tnEvcIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..11111) -- range added by Jing
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The identifier of the EVC. "
|
|
::= { tnEvcEntry 1 }
|
|
|
|
tnEvcNNIPortlist OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of Network to Network Interfaces for the EVC."
|
|
::= { tnEvcEntry 2 }
|
|
|
|
tnEvcVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny -- changed from VlanId to VlanIdOrAny by Jing
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID in the PB network.
|
|
It may be inserted in a C-tag, S-tag or S-custom tag
|
|
depending on the NNI port VLAN configuration.
|
|
The allowed range is from 1 through 4094"
|
|
::= { tnEvcEntry 3 }
|
|
|
|
tnEvcIVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrAny -- changed from VlanId to VlanIdOrAny by Jing
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Internal/classified VLAN ID in the PB network.
|
|
The allowed range is from 1 through 4094"
|
|
::= { tnEvcEntry 4 }
|
|
|
|
tnEvcLearning OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The learning mode for the EVC controls whether source MAC addresses are learned for frames matching the EVC.
|
|
Learning may be disabled if the EVC only includes two UNI/NNI ports. The allowed values are:
|
|
Enabled: Learning is enabled (MAC addresses are learned).
|
|
Disabled: Learning is disabled (MAC addresses are not learned)."
|
|
::= { tnEvcEntry 5 }
|
|
|
|
tnEvcInnerTagType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
none(1),
|
|
cTag(2),
|
|
sTag(3),
|
|
sCustomTag(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports.
|
|
The allowed values are:
|
|
None: An inner tag is not inserted.
|
|
cTag: An inner C-tag is inserted.
|
|
sTag: An inner S-tag is inserted.
|
|
sCustomTag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI."
|
|
::= { tnEvcEntry 6 }
|
|
|
|
tnEvcInnerVidMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
normal(1),
|
|
tunnel(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner VID Mode affects the VID in the inner and outer tag. The allowed values are:
|
|
normal: The VID of the two outer tags aren't swapped.
|
|
tunnel: The VID of the two outer tags are swapped,
|
|
so that the VID of the outer tag is taken from the Inner Tag configuration
|
|
and the VID of the inner tag is the EVC VID.
|
|
In this mode, the NNI ports are normally configured to do EVC classification based on the inner tag.
|
|
"
|
|
::= { tnEvcEntry 7 }
|
|
|
|
tnEvcInnerVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrAnyOrNone -- changed from:VlanId to VlanIdOrAny by Jing
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Inner tag VLAN ID. The allowed range is from 0 through 4094."
|
|
::= { tnEvcEntry 8 }
|
|
|
|
tnEvcInnerPCPDEIPreservation OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
preserved(1),
|
|
fixed(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag PCP and DEI preservation. The allowed values are:
|
|
Preserved: The inner tag PCP and DEI is preserved.
|
|
Fixed: The inner tag PCP and DEI is fixed. "
|
|
::= { tnEvcEntry 9 }
|
|
|
|
tnEvcInnerPCP OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag PCP value. The allowed range is from 0 through 7. "
|
|
::= { tnEvcEntry 10 }
|
|
|
|
tnEvcInnerDEI OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag DEI value. The allowed value is 0 or 1."
|
|
::= { tnEvcEntry 11 }
|
|
|
|
tnEvcOuterVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrAnyOrNone -- changed from:VlanId to VlanIdOrAny by Jing
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Outer tag VLAN ID. The allowed range is from 0 through 4094."
|
|
::= { tnEvcEntry 12 }
|
|
|
|
tnEvcStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row entry of EVC table. This object isused to manage the
|
|
creation and deletion of conceptual rows.
|
|
|
|
The status column has six defined values:
|
|
|
|
- 'active', which indicates that the conceptual row is
|
|
available for use by the managed device;
|
|
|
|
- 'notInService', which indicates that the conceptual
|
|
row exists in the agent, but is unavailable for use by
|
|
the managed device (see NOTE below);
|
|
|
|
- 'notReady', which indicates that the conceptual row
|
|
exists in the agent, but is missing information
|
|
necessary in order to be available for use by the
|
|
managed device;
|
|
|
|
- 'createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device;
|
|
|
|
- 'createAndWait', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row (but not make it available for use by
|
|
the managed device); and,
|
|
|
|
- 'destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
For a detailed description of this object, please refer to
|
|
SNMPv2-TC MIB."
|
|
::= { tnEvcEntry 13 }
|
|
|
|
tnEvcPolicerID OBJECT-TYPE
|
|
SYNTAX INTEGER(1..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress bandwidth profile mode for the EVC. The possible values are:
|
|
Specific: The allowed range is from 1 through 128.
|
|
Discard: All received frames are discarded for the EVC. The value is 4094.
|
|
None: None bandwidth profile for the EVC. The value is 4095."
|
|
::= { tnEvcEntry 14 }
|
|
|
|
tnEvcName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..127))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EVC Administrative Name."
|
|
::= { tnEvcEntry 15 }
|
|
|
|
-- ECE tables
|
|
|
|
tnEvcEceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnEvcEceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the configuration of EVC control entry."
|
|
::= { tnEvcCfgMgmtGroup 3 }
|
|
|
|
tnEvcEceEntry OBJECT-TYPE
|
|
SYNTAX TnEvcEceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents an ECE.
|
|
|
|
The system automatically creates an entry when the system or
|
|
the EMS/NMS creates a row in the cevcECETable. Likewise, the
|
|
system automatically destroys an entry when the system or
|
|
the EMS/NMS destroys the corresponding row in the cevcECETable."
|
|
INDEX { tnEvcEceId }
|
|
::= { tnEvcEceTable 1 }
|
|
|
|
TnEvcEceEntry ::= SEQUENCE {
|
|
tnEvcEceId INTEGER,
|
|
tnEvcEceNextEceId INTEGER,
|
|
tnEvcEceUNIPortlist PortList,
|
|
tnEvcEceTagType INTEGER,
|
|
|
|
tnEvcEceTagVIDFilterType INTEGER,
|
|
tnEvcEceTagVIDFilterVal VlanIdOrAnyOrNone,
|
|
tnEvcEceTagVIDFilterStart VlanIdOrAnyOrNone,
|
|
tnEvcEceTagVIDFilterEnd VlanIdOrAnyOrNone,
|
|
|
|
tnEvcEceTagPCP BITS,
|
|
tnEvcEceTagDEI INTEGER,
|
|
tnEvcEceTagFrameType INTEGER,
|
|
|
|
--ipv4/ipv6 common
|
|
tnEvcEceProtoType INTEGER,
|
|
tnEvcEceProtoVal INTEGER,
|
|
tnEvcEceDscpFilterType INTEGER,
|
|
tnEvcEceDscpFilterVal INTEGER,
|
|
tnEvcEceDscpRangeStart INTEGER,
|
|
tnEvcEceDscpRangeEnd INTEGER,
|
|
|
|
tnEvcEceSrcPortFilterType INTEGER,
|
|
tnEvcEceSrcPortFilterNo INTEGER,
|
|
tnEvcEceSrcPortRangeStart INTEGER,
|
|
tnEvcEceSrcPortRangeEnd INTEGER,
|
|
|
|
tnEvcEceDstPortFilterType INTEGER,
|
|
tnEvcEceDstPortFilterNo INTEGER,
|
|
tnEvcEceDstPortRangeStart INTEGER,
|
|
tnEvcEceDstPortRangeEnd INTEGER,
|
|
|
|
--ipv4 speciific
|
|
tnEvcEceIpv4DipSipFilter INTEGER,
|
|
tnEvcEceIpv4DipSipAddr InetAddress,
|
|
tnEvcEceIpv4DipSipMask InetAddress,
|
|
tnEvcEceIpv4Fragment INTEGER,
|
|
|
|
--ipv6 specific
|
|
tnEvcEceIpv6DipSipFilter INTEGER,
|
|
tnEvcEceIpv6DipSipAddr Unsigned32,
|
|
tnEvcEceIpv6DipSipMask Unsigned32,
|
|
|
|
--outer tag
|
|
tnEvcEceOuterMode INTEGER,
|
|
tnEvcEceOuterPCPDEIPreserve INTEGER,
|
|
tnEvcEceOuterPCP INTEGER,
|
|
tnEvcEceOuterDEI INTEGER,
|
|
|
|
--Action
|
|
tnEvcEceActDirection INTEGER,
|
|
tnEvcEceActEvcidFilterType INTEGER,
|
|
tnEvcEceActEvcidVal INTEGER,
|
|
tnEvcEceActTagPopCount INTEGER,
|
|
tnEvcEceActPolicyId INTEGER,
|
|
tnEvcEceActClass INTEGER,
|
|
|
|
-- MAC Parameter
|
|
tnEvcEceDMacSMacFilterType INTEGER,
|
|
tnEvcEceDMacSMacVal MacAddress,
|
|
tnEvcEceDMacType INTEGER,
|
|
|
|
tnEvcEceConflict INTEGER,
|
|
|
|
tnEvcEceStatus RowStatus
|
|
|
|
}
|
|
|
|
tnEvcEceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..11111) -- range added by Jing
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The identifier of the ECE. "
|
|
::= { tnEvcEceEntry 1 }
|
|
|
|
tnEvcEceNextEceId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Specify the created ECE is placed before which ECE. "
|
|
::= { tnEvcEceEntry 2 }
|
|
|
|
tnEvcEceUNIPortlist OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of User to Network Interfaces for the ECE."
|
|
::= { tnEvcEceEntry 3 }
|
|
|
|
tnEvcEceTagType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
tagged(1),
|
|
untagged(2),
|
|
any(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tag type for the ECE. The possible values are:
|
|
tagged: The ECE will match tagged frames only.
|
|
untagged: The ECE will match untagged frames only.
|
|
any: The ECE will match both tagged and untagged frames. "
|
|
::= { tnEvcEceEntry 4 }
|
|
|
|
tnEvcEceTagVIDFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2),
|
|
range(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged'
|
|
is selected. The possible values are:
|
|
any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.)
|
|
specific: If you want to filter a specific VLAN ID value with this ECE, choose this
|
|
value. A field for entering a specific value appears.
|
|
range: If you want to filter a specific VLAN ID range filter with this ECE, choose
|
|
this value. A field for entering a range appears. "
|
|
::= { tnEvcEceEntry 5 }
|
|
|
|
tnEvcEceTagVIDFilterVal OBJECT-TYPE
|
|
SYNTAX VlanIdOrAnyOrNone -- changed from VlanIdOrNone by Jing
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the VLAN ID filter, you can enter a specific value.
|
|
The allowed value is from 0 through 4094. "
|
|
::= { tnEvcEceEntry 6 }
|
|
|
|
tnEvcEceTagVIDFilterStart OBJECT-TYPE
|
|
SYNTAX VlanIdOrAnyOrNone -- changed from VlanIdOrNone by Jing
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the VLAN ID filter, you can enter a specific range.
|
|
The allowed range start is from 0 through 4094. "
|
|
::= { tnEvcEceEntry 7 }
|
|
|
|
tnEvcEceTagVIDFilterEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrAnyOrNone -- changed from VlanIdOrNone by Jing
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the VLAN ID filter, you can enter a specific range.
|
|
The allowed range end is from 0 through 4094. "
|
|
::= { tnEvcEceEntry 8 }
|
|
|
|
tnEvcEceTagPCP OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
none(0) -- added by Jing
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PCP value for mataching the ECE. It only significant if tag type 'Tagged' is selected.
|
|
The possible values are:
|
|
any: The ECE will match any PCP value(all bits will be set to 1).
|
|
specific: each bit matchs a specific PCP of ECE(from bit0 to bit7).
|
|
range: The ECE will match PCP values in the selected range, valid range bit0-bit1, bit2-bit3,
|
|
bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7. "
|
|
::= { tnEvcEceEntry 9 }
|
|
|
|
tnEvcEceTagDEI OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
dei0(2),
|
|
dei1(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DEI value for mataching the ECE. It only significant if tag type 'Tagged' is selected.
|
|
The allowed value is: 0, 1 or Any. "
|
|
::= { tnEvcEceEntry 10 }
|
|
|
|
tnEvcEceTagFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
etype(2),
|
|
llc(3),
|
|
snap(4),
|
|
ipv4(5),
|
|
ipv6(6),
|
|
l2cp(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame type for the ECE. The possible values are:
|
|
any: The ECE will match any frame type.
|
|
etype: The ECE will match Ethernet Type frames only.
|
|
llc: The ECE will match LLC frames only.
|
|
snap: The ECE will match SNAP frames only.
|
|
ipv4: The ECE will match IPv4 frames only.
|
|
ipv6: The ECE will match IPv6 frames only.
|
|
l2cp: The ECE will match L2CP frames only. "
|
|
::= { tnEvcEceEntry 11 }
|
|
|
|
tnEvcEceProtoType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
udp(2),
|
|
tcp(3),
|
|
other(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP protocol for matching the ECE. The possible values are:
|
|
any: No protocol filter is specified. (Protocol filter status is 'don't-care'.)
|
|
udp: Specify the UDP for matching the ECE.
|
|
tcp: Specify the TCP for matching the ECE.
|
|
other: If you want to filter a specific protocol value with this ECE,
|
|
choose this value. A field for entering a specific value appears. "
|
|
::= { tnEvcEceEntry 12 }
|
|
|
|
tnEvcEceProtoVal OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the protocol filter, you can enter a specific value.
|
|
The allowed value is from 0 through 255."
|
|
::= { tnEvcEceEntry 13 }
|
|
|
|
tnEvcEceDscpFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2),
|
|
range(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP filter for matching the ECE. The possible values are:
|
|
any: No DSCP filter is specified. (DSCP filter status is 'don't-care'.)
|
|
specific: If you want to filter a specific DSCP value with this ECE, choose this value.
|
|
A field for entering a specific value appears.
|
|
range: If you want to filter a specific DSCP range filter with this ECE, choose this value.
|
|
A field for entering a range appears. "
|
|
::= { tnEvcEceEntry 14}
|
|
|
|
tnEvcEceDscpFilterVal OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the DSCP filter, you can enter a specific value.
|
|
The allowed value is from 0 through 63. "
|
|
::= { tnEvcEceEntry 15 }
|
|
|
|
tnEvcEceDscpRangeStart OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the DSCP filter, you can enter a specific range.
|
|
The allowed range start is from 0 through 63. "
|
|
::= { tnEvcEceEntry 16 }
|
|
|
|
tnEvcEceDscpRangeEnd OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the DSCP filter, you can enter a specific range.
|
|
The allowed range end is from 0 through 63. "
|
|
::= { tnEvcEceEntry 17 }
|
|
|
|
tnEvcEceSrcPortFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2),
|
|
range(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP/UDP source port for matching the ECE. It only significant if protocol
|
|
filter 'UDP' or 'TCP' is selected. The possible values are:
|
|
any: No TCP/UDP source port filter is specified. (Source port filter status is 'don't-care'.)
|
|
specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value.
|
|
A field for entering a specific No. appears.
|
|
range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose
|
|
this value. A field for entering a range appears. "
|
|
::= { tnEvcEceEntry 18 }
|
|
|
|
tnEvcEceSrcPortFilterNo OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the source port filter, you can enter a specific value.
|
|
The allowed value is from 0 through 65535. "
|
|
::= { tnEvcEceEntry 19 }
|
|
|
|
tnEvcEceSrcPortRangeStart OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the source port filter, you can enter a specific range.
|
|
The allowed range start is from 0 through 65535. "
|
|
::= { tnEvcEceEntry 20 }
|
|
|
|
tnEvcEceSrcPortRangeEnd OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the source port filter, you can enter a specific range.
|
|
The allowed range end is from 0 through 65535. "
|
|
::= { tnEvcEceEntry 21 }
|
|
|
|
tnEvcEceDstPortFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2),
|
|
range(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP/UDP destination port for matching the ECE. It only significant if protocol
|
|
filter 'UDP' or 'TCP' is selected. The possible values are:
|
|
any: No TCP/UDP destination port filter is specified. (Source port filter status is 'don't-care'.)
|
|
specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value.
|
|
A field for entering a specific No. appears.
|
|
range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose
|
|
this value. A field for entering a range appears. "
|
|
::= { tnEvcEceEntry 22 }
|
|
|
|
tnEvcEceDstPortFilterNo OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the destination port filter, you can enter a specific value.
|
|
The allowed value is from 0 through 65535. "
|
|
::= { tnEvcEceEntry 23 }
|
|
|
|
tnEvcEceDstPortRangeStart OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the destination port filter, you can enter a specific range.
|
|
The allowed range start is from 0 through 65535. "
|
|
::= { tnEvcEceEntry 24 }
|
|
|
|
tnEvcEceDstPortRangeEnd OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the destination port filter, you can enter a specific range.
|
|
The allowed range end is from 0 through 65535. "
|
|
::= { tnEvcEceEntry 25 }
|
|
|
|
tnEvcEceIpv4DipSipFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
host(2),
|
|
network(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source/destination IP address for matching the ECE. It depend on by the port address mode,
|
|
when port address mode is set to 'Source' then the field is used for source address. Similarly
|
|
when port address mode is set to 'Destination' then the field is used for destination address.
|
|
The possible values are:
|
|
Any: No SIP/DIP filter is specified. (SIP/DIP filter status is 'don't-care'.)
|
|
Host: If you want to filter a specific host address with this ECE, choose this value. A field
|
|
for entering a host address appears.
|
|
Network: If you want to filter a specific network address with this ECE, choose this value.
|
|
A Two fields for entering a specific network address and network mask appears. "
|
|
::= { tnEvcEceEntry 26 }
|
|
|
|
tnEvcEceIpv4DipSipAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or
|
|
network address."
|
|
::= { tnEvcEceEntry 27 }
|
|
|
|
tnEvcEceIpv4DipSipMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask."
|
|
::= { tnEvcEceEntry 28 }
|
|
|
|
tnEvcEceIpv4Fragment OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
fragment(2),
|
|
nonfragment(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv4 Fragment for matching the ECE. This involves the settings for the More Fragments (MF) bit
|
|
and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame. The possible values are:
|
|
any: The ECE will match any MF bit.
|
|
fragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must be
|
|
able to match this entry.
|
|
nonfragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must
|
|
not be able to match this entry. "
|
|
::= { tnEvcEceEntry 29 }
|
|
|
|
tnEvcEceIpv6DipSipFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source/destination IP address for matching the ECE. It depend on by the port address mode,
|
|
when port address mode is set to 'Source' then the field is used for source address. Similarly
|
|
when port address mode is set to 'Destination' then the field is used for destination address.
|
|
The possible values are:
|
|
Any: No SIP/DIP filter is specified. (SIP/DIP filter status is 'don't-care'.)
|
|
specific: If you want to filter a specific host address with this ECE, choose this value. A field
|
|
for entering a host address appears."
|
|
::= { tnEvcEceEntry 30 }
|
|
|
|
tnEvcEceIpv6DipSipAddr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or
|
|
network address. When 'IPv6' is selected for the Frame Type, the field only supported 32 bits for
|
|
IPv6 address."
|
|
::= { tnEvcEceEntry 31 }
|
|
|
|
tnEvcEceIpv6DipSipMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask.
|
|
When 'IPv6' is selected for the Frame Type, the field only supported 32 bits for IPv6 address mask."
|
|
::= { tnEvcEceEntry 32 }
|
|
|
|
tnEvcEceOuterMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outer tag PCP and DEI preservation for the ECE. The possible values are:
|
|
enabled: Enable outer tag for nni-to-uni direction for the ECE.
|
|
disabled: Disable outer tag for nni-to-uni direction for the ECE. "
|
|
::= { tnEvcEceEntry 33 }
|
|
|
|
tnEvcEceOuterPCPDEIPreserve OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
preserved(1),
|
|
fixed(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outer tag PCP and DEI preservation for the ECE. The possible values are:
|
|
preserved: The outer tag PCP and DEI is preserved.
|
|
fixed: The outer tag PCP and DEI is fixed. "
|
|
::= { tnEvcEceEntry 34 }
|
|
|
|
tnEvcEceOuterPCP OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outer tag PCP value for the ECE. The allowed range is from 0 through 7. "
|
|
::= { tnEvcEceEntry 35 }
|
|
|
|
tnEvcEceOuterDEI OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outer tag DEI value for the ECE. The allowed value is 0 or 1. "
|
|
::= { tnEvcEceEntry 36 }
|
|
|
|
tnEvcEceActDirection OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
both(1),
|
|
uni2nni(2),
|
|
nni2uni(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EVCs and ECEs are used to setup flows in one or both directions as determined by the ECE
|
|
Direction parameter. If the ECE is bidirectional, the ingress rules of the NNI ports will be
|
|
setup to match the traffic being forwarded to NNI ports. The possible values are:
|
|
both: Bidirectional.
|
|
uni2nni: Unidirectional from UNI to NNI.
|
|
nni2uni: Unidirectional from NNI to UNI. "
|
|
::= { tnEvcEceEntry 37 }
|
|
|
|
tnEvcEceActEvcidFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outer tag PCP and DEI preservation for the ECE. The possible values are:
|
|
any: No EVC ID filter is specified. (EVC ID filter status is 'don't-care'.)
|
|
specific: If you want to filter a specific EVC ID with this ECE, choose this
|
|
value. A field for entering a specific value appears. "
|
|
::= { tnEvcEceEntry 38 }
|
|
|
|
tnEvcEceActEvcidVal OBJECT-TYPE
|
|
SYNTAX INTEGER(1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the VLAN ID filter, you can enter a specific
|
|
value. The allowed value is from 1 through 128. "
|
|
::= { tnEvcEceEntry 39 }
|
|
|
|
tnEvcEceActTagPopCount OBJECT-TYPE
|
|
SYNTAX INTEGER(0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress tag pop count for the ECE. The allowed range is from 0 through 2."
|
|
::= { tnEvcEceEntry 40 }
|
|
|
|
tnEvcEceActPolicyId OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL Policy ID for the ECE for matching ACL rules. The allowed range is
|
|
from 0 through 255."
|
|
::= { tnEvcEceEntry 41 }
|
|
|
|
tnEvcEceActClass OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
tc0(1),
|
|
tc1(2),
|
|
tc2(3),
|
|
tc3(4),
|
|
tc4(5),
|
|
tc5(6),
|
|
tc6(7),
|
|
tc7(8),
|
|
disabled(9)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The traffic class for the ECE. The allowed range is from 0 through 8 or disabled. "
|
|
::= { tnEvcEceEntry 42 }
|
|
|
|
tnEvcEceDMacSMacFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source/destination MAC address for matching the ECE. It depend on by the port
|
|
address mode, when port address mode is set to 'Source' then the field is used for
|
|
source MAC address. Similarly when port address mode is set to 'Destination' then
|
|
the field is used for destination MAC address. The possible values are:
|
|
any: No SMAC/DMAC filter is specified. (SMAC/DMAC filter status is 'don't-care'.)
|
|
specific: If you want to filter a specific SMAC/DMAC value with this ECE, choose
|
|
this value. A field for entering a specific value appears. "
|
|
::= { tnEvcEceEntry 43 }
|
|
|
|
tnEvcEceDMacSMacVal OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the SMAC/DMAC filter, you can enter a specific value.
|
|
The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is
|
|
a hexadecimal digit). "
|
|
::= { tnEvcEceEntry 44 }
|
|
|
|
tnEvcEceDMacType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
unicast(2),
|
|
multicast(3),
|
|
broadcast(4),
|
|
specific(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address for matching the ECE. The possible values are:
|
|
any: No destination MAC address is specified.
|
|
unicast: Frame must be unicast.
|
|
multicast: Frame must be multicast.
|
|
broadcast: Frame must be broadcast.
|
|
specific: If you want to filter a specific DMAC value with this ECE, choose this value."
|
|
::= { tnEvcEceEntry 45 }
|
|
|
|
tnEvcEceConflict OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the hardware status of the specific ECE. The specific ECE is not applied to
|
|
the hardware due to hardware limitations. "
|
|
::= { tnEvcEceEntry 46 }
|
|
|
|
tnEvcEceStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row entry of ECE table. This object isused to manage the
|
|
creation and deletion of conceptual rows.
|
|
|
|
The status column has six defined values:
|
|
|
|
- 'active', which indicates that the conceptual row is
|
|
available for use by the managed device;
|
|
|
|
- 'notInService', which indicates that the conceptual
|
|
row exists in the agent, but is unavailable for use by
|
|
the managed device (see NOTE below);
|
|
|
|
- 'notReady', which indicates that the conceptual row
|
|
exists in the agent, but is missing information
|
|
necessary in order to be available for use by the
|
|
managed device;
|
|
|
|
- 'createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device;
|
|
|
|
- 'createAndWait', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row (but not make it available for use by
|
|
the managed device); and,
|
|
|
|
- 'destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
For a detailed description of this object, please refer to
|
|
SNMPv2-TC MIB."
|
|
::= { tnEvcEceEntry 47 }
|
|
|
|
--cevcBandwidthProfiles
|
|
|
|
tnEvcBandwidthProfilesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnEvcBandwidthProfilesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry displays and sets current EVC ingress bandwidth profile configurations.
|
|
These policers may be used to limit the traffic received on UNI ports."
|
|
::= { tnEvcCfgMgmtGroup 4 }
|
|
|
|
tnEvcBandwidthProfilesEntry OBJECT-TYPE
|
|
SYNTAX TnEvcBandwidthProfilesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents an entry of EVC ingress bandwidth profile configuration."
|
|
INDEX { tnEvcBandwidthProfilesIndex }
|
|
::= { tnEvcBandwidthProfilesTable 1 }
|
|
|
|
TnEvcBandwidthProfilesEntry ::= SEQUENCE {
|
|
tnEvcBandwidthProfilesIndex INTEGER,
|
|
tnEvcBandwidthProfilesPolicerMode INTEGER,
|
|
tnEvcBandwidthProfilesCIR INTEGER,
|
|
tnEvcBandwidthProfilesCBS INTEGER,
|
|
tnEvcBandwidthProfilesEIR INTEGER,
|
|
tnEvcBandwidthProfilesEBS INTEGER,
|
|
tnEvcBandwidthProfilesState INTEGER
|
|
}
|
|
|
|
tnEvcBandwidthProfilesIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..11111) -- range added by Jing
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The EVC bandwidth profiles policer index."
|
|
::= { tnEvcBandwidthProfilesEntry 1 }
|
|
|
|
tnEvcBandwidthProfilesPolicerMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
coupled(1),
|
|
aware(2),
|
|
blind(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The colour mode of the bandwidth profile. The allowed values are:
|
|
coupled: Colour-aware mode with coupling enabled.
|
|
aware: Colour-aware mode with coupling disabled. "
|
|
::= { tnEvcBandwidthProfilesEntry 2 }
|
|
|
|
tnEvcBandwidthProfilesCIR OBJECT-TYPE
|
|
SYNTAX INTEGER(0..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Committed Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second."
|
|
::= { tnEvcBandwidthProfilesEntry 3 }
|
|
|
|
tnEvcBandwidthProfilesCBS OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Committed Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes. "
|
|
::= { tnEvcBandwidthProfilesEntry 4 }
|
|
|
|
tnEvcBandwidthProfilesEIR OBJECT-TYPE
|
|
SYNTAX INTEGER(0..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Excess Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second."
|
|
::= { tnEvcBandwidthProfilesEntry 5 }
|
|
|
|
tnEvcBandwidthProfilesEBS OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Excess Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes. "
|
|
::= { tnEvcBandwidthProfilesEntry 6 }
|
|
|
|
tnEvcBandwidthProfilesState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the bandwidth profile.
|
|
The allowed values are:
|
|
enabled: The bandwidth profile enabled.
|
|
disabled: The bandwidth profile is disabled."
|
|
::= { tnEvcBandwidthProfilesEntry 7 }
|
|
|
|
-- exttable
|
|
tnEvcExtEceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnEvcExtEceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the configuration of EVC control entry."
|
|
::= { tnEvcCfgMgmtGroup 5 }
|
|
|
|
tnEvcExtEceEntry OBJECT-TYPE
|
|
SYNTAX TnEvcExtEceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents an ECE.
|
|
The system automatically creates an entry when the system or
|
|
the EMS/NMS creates a row in the cevcECETable. Likewise, the
|
|
system automatically destroys an entry when the system or
|
|
the EMS/NMS destroys the corresponding row in the cevcECETable."
|
|
AUGMENTS { tnEvcEceEntry }
|
|
::= { tnEvcExtEceTable 1 }
|
|
|
|
TnEvcExtEceEntry ::= SEQUENCE {
|
|
tnEvcEceInnerTagType INTEGER,
|
|
tnEvcEceInnerTagVIDFilterType INTEGER,
|
|
tnEvcEceInnerTagVIDFilterVal VlanIdOrNone,
|
|
tnEvcEceInnerTagVIDFilterStart VlanIdOrNone,
|
|
tnEvcEceInnerTagVIDFilterEnd VlanIdOrNone,
|
|
tnEvcEceInnerTagPCP BITS,
|
|
tnEvcEceInnerTagDEI INTEGER,
|
|
tnEvcEcePolicer INTEGER,
|
|
tnEvcEceOuterVid VlanIdOrNone,
|
|
tnEvcEceNNIInnerTagType INTEGER,
|
|
tnEvcEceInnerVid VlanIdOrNone,
|
|
tnEvcEceInnerPCPDEIPreserve INTEGER,
|
|
tnEvcEceInnerPCP INTEGER,
|
|
tnEvcEceInnerDEI INTEGER,
|
|
-- MAC Parameter
|
|
tnEvcEceDMacVal MacAddress,
|
|
--outer tag
|
|
tnEvcEceOuterPCPMode INTEGER,
|
|
tnEvcEceOuterDEIMode INTEGER,
|
|
--Action
|
|
tnEvcEceActRuleType INTEGER,
|
|
tnEvcEceActTxLookupType INTEGER,
|
|
tnEvcEceActDropPrecType INTEGER,
|
|
-- Egress InnerTag
|
|
tnEvcEceInnerPcpMode INTEGER,
|
|
tnEvcEceIInnerDeiMode INTEGER,
|
|
-- IPv4
|
|
tnEvcEceIpv4DipFilter INTEGER,
|
|
tnEvcEceIpv4DipAddr InetAddress,
|
|
tnEvcEceIpv4DipMask InetAddress,
|
|
-- IPv6
|
|
tnEvcEceIpv6DipFilter INTEGER,
|
|
tnEvcEceIpv6DipAddr Unsigned32,
|
|
tnEvcEceIpv6DipMask Unsigned32,
|
|
-- Ingress Matching
|
|
tnEvcEceLookup INTEGER,
|
|
-- ETYPE
|
|
tnEvcEceEtypeFilter INTEGER,
|
|
tnEvcEceEtypeValue Unsigned32,
|
|
tnEvcEceEtypeDataFilter INTEGER,
|
|
tnEvcEceEtypeData Unsigned32,
|
|
tnEvcEceEtypeDataMask Unsigned32,
|
|
-- LLC
|
|
tnEvcEceLlcDSAPFilter INTEGER,
|
|
tnEvcEceLlcDSAPValue Unsigned32,
|
|
tnEvcEceLlcSSAPFilter INTEGER,
|
|
tnEvcEceLlcSSAPValue Unsigned32,
|
|
tnEvcEceLlcCtrlFilter INTEGER,
|
|
tnEvcEceLlcCtrlValue Unsigned32,
|
|
tnEvcEceLlcDataFilter INTEGER,
|
|
tnEvcEceLlcDataValue Unsigned32,
|
|
tnEvcEceLlcDataMask Unsigned32,
|
|
-- SNAP
|
|
tnEvcEceSnapOuiFilter INTEGER,
|
|
tnEvcEceSnapOuiValue Unsigned32,
|
|
tnEvcEceSnapPidFilter INTEGER,
|
|
tnEvcEceSnapPidValue Unsigned32,
|
|
-- L2CP
|
|
tnEvcEceL2cpProtoType INTEGER
|
|
}
|
|
|
|
tnEvcEceInnerTagType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
untagged(2),
|
|
tagged(3),
|
|
c-tag(4),
|
|
s-tag(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Inner tag type for the ECE. The possible values are:
|
|
tagged: The ECE will match tagged frames only.
|
|
untagged: The ECE will match untagged frames only.
|
|
any: The ECE will match both tagged and untagged frames.
|
|
If supported:
|
|
C-Tagged: The ECE will match custom tagged frames only.
|
|
S-Tagged: The ECE will match service tagged frames only."
|
|
::= { tnEvcExtEceEntry 1 }
|
|
|
|
tnEvcEceInnerTagVIDFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2),
|
|
range(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Inner VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged'
|
|
is selected. The possible values are:
|
|
any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.)
|
|
specific: If you want to filter a specific VLAN ID value with this ECE, choose this
|
|
value. A field for entering a specific value appears.
|
|
range: If you want to filter a specific VLAN ID range filter with this ECE, choose
|
|
this value. A field for entering a range appears. "
|
|
::= { tnEvcExtEceEntry 2 }
|
|
|
|
tnEvcEceInnerTagVIDFilterVal OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the Inner VLAN ID filter, you can enter a specific value.
|
|
The allowed value is from 0 through 4094. "
|
|
::= { tnEvcExtEceEntry 3 }
|
|
|
|
tnEvcEceInnerTagVIDFilterStart OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range.
|
|
The allowed range start is from 0 through 4094. "
|
|
::= { tnEvcExtEceEntry 4 }
|
|
|
|
tnEvcEceInnerTagVIDFilterEnd OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range.
|
|
The allowed range end is from 0 through 4094. "
|
|
::= { tnEvcExtEceEntry 5 }
|
|
|
|
tnEvcEceInnerTagPCP OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
none(0) -- added by Jing
|
|
}
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PCP value for matching the ECE. It only significant if tag type 'Tagged' is selected.
|
|
The possible values are:
|
|
any: The ECE will match any PCP value(all bits will be set to 1).
|
|
specific: each bit matchs a specific PCP of ECE(from bit0 to bit7).
|
|
range: The ECE will match PCP values in the selected range, valid range bit0-bit1, bit2-bit3,
|
|
bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7. "
|
|
::= { tnEvcExtEceEntry 6 }
|
|
|
|
tnEvcEceInnerTagDEI OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
dei0(2),
|
|
dei1(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DEI value for matching the ECE. It only significant if tag type 'Tagged' is selected.
|
|
The allowed value is: 0, 1 or Any. "
|
|
::= { tnEvcExtEceEntry 7 }
|
|
|
|
tnEvcEcePolicer OBJECT-TYPE
|
|
SYNTAX INTEGER(1..4096)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress bandwidth profile mode for the EVC. The possible values are:
|
|
Specific: The allowed range is from 1 through 128.
|
|
Discard: All received frames are discarded for the EVC. The value is 4094.
|
|
None: None bandwidth profile for the EVC. The value is 4095.
|
|
EVC:The bandwidth profile for the specified EVC ID is used. The value is 4096."
|
|
::= { tnEvcExtEceEntry 8 }
|
|
|
|
tnEvcEceOuterVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EVC outer tag VID for UNI ports. The allowed value is from 0 through 4094."
|
|
::= { tnEvcExtEceEntry 9 }
|
|
|
|
tnEvcEceNNIInnerTagType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
none(0),
|
|
ctag(1),
|
|
stag(2),
|
|
sctag(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner type for the ECE determines whether an inner tag is inserted in frames forwarded to NNI ports.\
|
|
The possible values are:
|
|
None: An inner tag is not inserted.
|
|
C-tag: An inner C-tag is inserted.
|
|
S-tag: An inner S-tag is inserted.
|
|
S-custom-tag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI.
|
|
"
|
|
::= { tnEvcExtEceEntry 10 }
|
|
|
|
tnEvcEceInnerVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag VLAN ID for the ECE. The allowed range is from 0 through 4094."
|
|
::= { tnEvcExtEceEntry 11 }
|
|
|
|
tnEvcEceInnerPCPDEIPreserve OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
preserved(1),
|
|
fixed(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag PCP and DEI preservation for the ECE. The possible values are:
|
|
Preserved: The inner tag PCP and DEI is preserved.
|
|
Fixed: The inner tag PCP and DEI is fixed.
|
|
"
|
|
::= { tnEvcExtEceEntry 12 }
|
|
|
|
tnEvcEceInnerPCP OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag PCP value for the ECE. The allowed range is from 0 through 7."
|
|
::= { tnEvcExtEceEntry 13 }
|
|
|
|
tnEvcEceInnerDEI OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag DEI value for the ECE. The allowed value is 0 or 1."
|
|
::= { tnEvcExtEceEntry 14 }
|
|
|
|
tnEvcEceDMacVal OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the DMAC filter, you can enter a specific value.
|
|
The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is
|
|
a hexadecimal digit). "
|
|
::= { tnEvcExtEceEntry 15 }
|
|
|
|
tnEvcEceOuterPCPMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
classified(1),
|
|
fixed(2),
|
|
mapped(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outer tag PCP mode for the ECE. The possible values are:
|
|
Classified: The outer tag PCP Mode is classified.
|
|
Fixed: The outer tag PCP Mode is fixed.
|
|
Mapped: The outer tag PCP Mode is based on mapped (QOS, DP)."
|
|
::= { tnEvcExtEceEntry 16 }
|
|
|
|
tnEvcEceOuterDEIMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
classified(1),
|
|
fixed(2),
|
|
dropPrec(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outer tag DEI mode for the ECE. The possible values are:
|
|
Classified: The outer tag DEI mode is classified.
|
|
Fixed: The outer tag DEI mode is fixed.
|
|
Drop Precedence: The outer tag DEI mode is drop precedence."
|
|
::= { tnEvcExtEceEntry 17 }
|
|
|
|
tnEvcEceActRuleType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
both(1),
|
|
rx(2),
|
|
tx(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rule type for the ECE. The possible values are:
|
|
Both: Ingress and egress rule.
|
|
RX: Ingress rule.
|
|
TX: Egress rule."
|
|
::= { tnEvcExtEceEntry 18 }
|
|
|
|
tnEvcEceActTxLookupType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
vidLookup(1),
|
|
vidPCP(2),
|
|
isdx(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TX lookup for the ECE. The possible values are:
|
|
VID lookup: The TX lookup is based on VID.
|
|
VID-PCP: The TX lookup is based on VID and PCP.
|
|
ISDX: The TX lookup is based on ISDX."
|
|
::= { tnEvcExtEceEntry 19 }
|
|
|
|
tnEvcEceActDropPrecType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
dp0(1),
|
|
dp1(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The drop precedence for the ECE. The allowed range is 0, 1 or disabled."
|
|
::= { tnEvcExtEceEntry 20 }
|
|
|
|
tnEvcEceInnerPcpMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
classified(1),
|
|
fixed(2),
|
|
mapped(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag PCP mode for the ECE. The possible values are:
|
|
Classified: The inner tag PCP Mode is classified.
|
|
Fixed: The inner tag PCP Mode is classified.
|
|
Mapped: The inner tag PCP Mode is based on mapped (QOS, DP)."
|
|
::= { tnEvcExtEceEntry 21 }
|
|
|
|
tnEvcEceIInnerDeiMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
classified(1),
|
|
fixed(2),
|
|
dropPrecedence(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The inner tag DEI mode for the ECE. The possible values are:
|
|
Classified: The inner tag DEI mode is classified.
|
|
Fixed: The inner tag DEI mode is fixed.
|
|
Drop Precedence: The inner tag DEI mode is drop precedence."
|
|
::= { tnEvcExtEceEntry 22 }
|
|
|
|
tnEvcEceIpv4DipFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
host(2),
|
|
network(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address for matching the ECE.
|
|
The possible values are:
|
|
Any: No DIP filter is specified. (DIP filter status is 'don't-care'.)
|
|
Host: If you want to filter a specific host address with this ECE, choose this value. A field
|
|
for entering a host address appears.
|
|
Network: If you want to filter a specific network address with this ECE, choose this value.
|
|
A Two fields for entering a specific network address and network mask appears. "
|
|
::= { tnEvcExtEceEntry 23 }
|
|
|
|
tnEvcEceIpv4DipAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or
|
|
network address."
|
|
::= { tnEvcExtEceEntry 24 }
|
|
|
|
tnEvcEceIpv4DipMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask."
|
|
::= { tnEvcExtEceEntry 25 }
|
|
|
|
tnEvcEceIpv6DipFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
host(2),
|
|
network(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address for matching the ECE.
|
|
The possible values are:
|
|
Any: No DIP filter is specified. (DIP filter status is 'don't-care'.)
|
|
Host: If you want to filter a specific host address with this ECE, choose this value. A field
|
|
for entering a host address appears.
|
|
Network: If you want to filter a specific network address with this ECE, choose this value.
|
|
A Two fields for entering a specific network address and network mask appears. "
|
|
::= { tnEvcExtEceEntry 26 }
|
|
|
|
tnEvcEceIpv6DipAddr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or
|
|
network address."
|
|
::= { tnEvcExtEceEntry 27 }
|
|
|
|
tnEvcEceIpv6DipMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask."
|
|
::= { tnEvcExtEceEntry 28 }
|
|
|
|
tnEvcEceLookup OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
basic(1),
|
|
advanced(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The looup type for matching the ECE. The allowed values are:
|
|
Basic: First lookup for basic classification.
|
|
Advanced: Second lookup for advanced classification."
|
|
::= { tnEvcExtEceEntry 29 }
|
|
|
|
tnEvcEceEtypeFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ethernet type value for matching the ECE. The possible values are:
|
|
Any: No Ethernet type value filter is specified. (Ethernet type filter status is 'don't-care'.)
|
|
Specific: If you want to filter a specific Ethernet type value with this ECE, choose this value."
|
|
::= { tnEvcExtEceEntry 30 }
|
|
|
|
tnEvcEceEtypeValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the Ethernet type filter, you can enter a specific value.
|
|
The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv4), 0x806(ARP) and 0x86DD(IPv6)."
|
|
::= { tnEvcExtEceEntry 31 }
|
|
|
|
tnEvcEceEtypeDataFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ethernet type data for matching the ECE. The possible values are:
|
|
Any: No Ethernet type data filter is specified. (Ethernet type filter status is 'don't-care'.)
|
|
Specific: If you want to filter a specific Ethernet type value with this ECE, choose this value."
|
|
::= { tnEvcExtEceEntry 32 }
|
|
|
|
tnEvcEceEtypeData OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the Ethernet type filter, you can enter a specific value.
|
|
The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv4), 0x806(ARP) and 0x86DD(IPv6)."
|
|
::= { tnEvcExtEceEntry 33 }
|
|
|
|
tnEvcEceEtypeDataMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the Ethernet type data filter, you can enter a specific value.
|
|
It is a pair of the Ethernet type data and its mask. The allowed value is from 0x0 through 0xFFFF."
|
|
::= { tnEvcExtEceEntry 34 }
|
|
|
|
tnEvcEceLlcDSAPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLC DSAP for matching the ECE. The possible values are:
|
|
Any: No LLC DSAP value filter is specified. (LLC DSAP filter status is 'don't-care'.)
|
|
Specific: If you want to filter a specific LLC DSAP value with this ECE, choose this value."
|
|
::= { tnEvcExtEceEntry 35 }
|
|
|
|
tnEvcEceLlcDSAPValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the LLC DSAP filter, you can enter a specific value.
|
|
The allowed value is from 0x0 through 0xFF"
|
|
::= { tnEvcExtEceEntry 36 }
|
|
|
|
tnEvcEceLlcSSAPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLC SSAP for matching the ECE. The possible values are:
|
|
Any: No LLC SSAP value filter is specified. (LLC SSAP filter status is 'don't-care'.)
|
|
Specific: If you want to filter a specific LLC SSAP value with this ECE, choose this value."
|
|
::= { tnEvcExtEceEntry 37 }
|
|
|
|
tnEvcEceLlcSSAPValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the LLC SSAP filter, you can enter a specific value.
|
|
The allowed value is from 0x0 through 0xFF."
|
|
::= { tnEvcExtEceEntry 38 }
|
|
|
|
tnEvcEceLlcCtrlFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLC control for matching the ECE. The possible values are:
|
|
Any: No LLC control value filter is specified. (LLC control filter status is 'don't-care'.)
|
|
Specific: If you want to filter a specific LLC control value with this ECE, choose this value."
|
|
::= { tnEvcExtEceEntry 39 }
|
|
|
|
tnEvcEceLlcCtrlValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the LLC control filter, you can enter a specific value.
|
|
The allowed value is from 0x0 through 0xFF."
|
|
::= { tnEvcExtEceEntry 40 }
|
|
|
|
tnEvcEceLlcDataFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLC data for matching the ECE. The possible values are:
|
|
Any: No LLC data filter is specified. (LLC filter status is 'don't-care'.)
|
|
Specific: If you want to filter a specific LLC value with this ECE, choose this value."
|
|
::= { tnEvcExtEceEntry 41 }
|
|
|
|
tnEvcEceLlcDataValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the LLC data filter, you can enter a specific value.
|
|
It is a pair of the LLC data and its mask. The allowed value is from 0x0 through 0xFFFF."
|
|
::= { tnEvcExtEceEntry 42 }
|
|
|
|
tnEvcEceLlcDataMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the LLC data filter, you can enter a specific mask.
|
|
The allowed value is from 0x0 through 0xFFFF."
|
|
::= { tnEvcExtEceEntry 43 }
|
|
|
|
tnEvcEceSnapOuiFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNAP OUI for matching the ECE. The possible values are:
|
|
Any: No SNAP OUI value filter is specified. (SNAP OUI filter status is 'don't-care'.)
|
|
Specific: If you want to filter a specific SNAP OUI value with this ECE, choose this value."
|
|
::= { tnEvcExtEceEntry 44 }
|
|
|
|
tnEvcEceSnapOuiValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the SNAP OUI filter, you can enter a specific value.
|
|
The allowed value is from 00-00-00 through FF-FF-FF."
|
|
::= { tnEvcExtEceEntry 45 }
|
|
|
|
tnEvcEceSnapPidFilter OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
any(1),
|
|
specific(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNAP PID for matching the ECE. The possible values are:
|
|
Any: No SNAP PID value filter is specified. (SNAP PID filter status is 'don't-care'.)
|
|
Specific: If you want to filter a specific SNAP PID value with this ECE, choose this value."
|
|
::= { tnEvcExtEceEntry 46 }
|
|
|
|
tnEvcEceSnapPidValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the SNAP PID filter, you can enter a specific value.
|
|
The allowed value is from 0x0 through 0xFFFF."
|
|
::= { tnEvcExtEceEntry 47 }
|
|
|
|
tnEvcEceL2cpProtoType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
stpRstpMstp(1),
|
|
pause(2),
|
|
lacp(3),
|
|
lamp(4),
|
|
linkOam(5),
|
|
portAuth8021x(6),
|
|
elmi(7),
|
|
pbGroupAddr(8),
|
|
pbGvrp(9),
|
|
lldp(10),
|
|
gmrp(11),
|
|
gvrp(12),
|
|
uld(13),
|
|
pagp(14),
|
|
pvstPvstP(15),
|
|
ciscoBpdu(16),
|
|
cdp(17),
|
|
vtp(18),
|
|
dtp(19),
|
|
stpUplinkFast(20),
|
|
ciscoCfm(21)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The L2CP type for the ECE. The possible values are:
|
|
STP/RSTP/MSTP: Match STP/RSTP/MSTP frames.
|
|
Pause: Match Pause frames.
|
|
LACP: Match LACP frames.
|
|
LAMP: Match LAMP frames.
|
|
Link OAM(802.1ah): Match Link OAM(802.1ah) frames.
|
|
Port Authentication(802.1x): Match Port Authentication(802.1x) frames.
|
|
E-LMI: Match PB Group Address frames.
|
|
PB Group Address: Match PB Group Address frames.
|
|
PB GVRP: Match PB GVRP frames.
|
|
LLDP: Match LLDP frames.
|
|
GMRP: Match GMRP frames.
|
|
GVRP: Match GVRP frames.
|
|
ULD: Match ULD frames.
|
|
PAgP: Match PAgP frames.
|
|
PVST/PVST+: Match PVST/PVST+ frames.
|
|
Cisco BPDU: Match Cisco BPDU frames.
|
|
CDP: Match CDP frames.
|
|
VTP: Match VTP frames.
|
|
DTP: Match DTP frames.
|
|
STP Uplink Fast: Match STP Uplink Fast frames.
|
|
Cisco CFM: Match Cisco CFM frames."
|
|
::= { tnEvcExtEceEntry 48 }
|
|
|
|
-- EVC statistics table
|
|
tnEvcStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnEvcStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides NNI port traffic statistics for the selected EVC.
|
|
It also shows counters for UNI ports of ECEs mapping to the EVC."
|
|
::= { tnEvcStatGroup 1 }
|
|
|
|
tnEvcStatEntry OBJECT-TYPE
|
|
SYNTAX TnEvcStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents an entry of EVC statistics."
|
|
INDEX { ifIndex, tnEvcStatClass }
|
|
::= { tnEvcStatTable 1 }
|
|
|
|
TnEvcStatEntry ::= SEQUENCE {
|
|
tnEvcStatClass INTEGER,
|
|
tnEvcStatGreenFrameRx Counter64,
|
|
tnEvcStatGreenFrameTx Counter64,
|
|
tnEvcStatYellowFrameRx Counter64,
|
|
tnEvcStatYellowFrameTx Counter64,
|
|
tnEvcStatRedFrameRx Counter64,
|
|
tnEvcStatDiscardGreenFrame Counter64,
|
|
tnEvcStatDiscardYellowFrame Counter64,
|
|
tnEvcStatClear TruthValue
|
|
}
|
|
|
|
tnEvcStatClass OBJECT-TYPE
|
|
SYNTAX INTEGER (1..11111) -- range added by Jing
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The traffic class for the EVC. "
|
|
::= { tnEvcStatEntry 1 }
|
|
|
|
tnEvcStatGreenFrameRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of green received. "
|
|
::= { tnEvcStatEntry 2 }
|
|
|
|
tnEvcStatGreenFrameTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of green transmitted. "
|
|
::= { tnEvcStatEntry 3 }
|
|
|
|
tnEvcStatYellowFrameRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of yellow received. "
|
|
::= { tnEvcStatEntry 4 }
|
|
|
|
tnEvcStatYellowFrameTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of yellow transmitted. "
|
|
::= { tnEvcStatEntry 5 }
|
|
|
|
tnEvcStatRedFrameRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of red received. "
|
|
::= { tnEvcStatEntry 6 }
|
|
|
|
tnEvcStatDiscardGreenFrame OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of discarded in the green color. "
|
|
::= { tnEvcStatEntry 7 }
|
|
|
|
tnEvcStatDiscardYellowFrame OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of discarded in the yellow color. "
|
|
::= { tnEvcStatEntry 8 }
|
|
|
|
tnEvcStatClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears the counters for selected ports when
|
|
the value of tnEvcStatClear is true."
|
|
::= { tnEvcStatEntry 9 }
|
|
|
|
-- EVC statistics table for S4140
|
|
tnEvcExtStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnEvcExtStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides port traffic statistics for the selected EVC.
|
|
It also shows counters for UNI ports of ECEs mapping to the EVC."
|
|
::= { tnEvcStatGroup 2 }
|
|
|
|
tnEvcExtStatEntry OBJECT-TYPE
|
|
SYNTAX TnEvcExtStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents an entry of EVC statistics."
|
|
INDEX { tnEvcExtStatType, tnEvcExtStatIndex, tnEvcExtStatPort }
|
|
::= { tnEvcExtStatTable 1 }
|
|
|
|
TnEvcExtStatEntry ::= SEQUENCE {
|
|
tnEvcExtStatType INTEGER,
|
|
tnEvcExtStatIndex INTEGER,
|
|
tnEvcExtStatPort INTEGER,
|
|
tnEvcExtStatGreenFrameRx Counter64,
|
|
tnEvcExtStatGreenFrameTx Counter64,
|
|
tnEvcExtStatGreenBytesRx Counter64,
|
|
tnEvcExtStatGreenBytesTx Counter64,
|
|
tnEvcExtStatYellowFrameRx Counter64,
|
|
tnEvcExtStatYellowFrameTx Counter64,
|
|
tnEvcExtStatYellowBytesRx Counter64,
|
|
tnEvcExtStatYellowBytesTx Counter64,
|
|
tnEvcExtStatRedFrameRx Counter64,
|
|
tnEvcExtStatRedBytesRx Counter64,
|
|
tnEvcExtStatDiscardFrameRx Counter64,
|
|
tnEvcExtStatDiscardFrameTx Counter64,
|
|
tnEvcExtStatDiscardBytesRx Counter64,
|
|
tnEvcExtStatDiscardBytesTx Counter64,
|
|
tnEvcExtStatclear TruthValue
|
|
}
|
|
|
|
tnEvcExtStatType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
evc(1),
|
|
ece(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The traffic class for the EVC."
|
|
::= { tnEvcExtStatEntry 1 }
|
|
|
|
tnEvcExtStatIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..11111) -- range added by Jing
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The EVC or ECE index."
|
|
::= { tnEvcExtStatEntry 2 }
|
|
|
|
tnEvcExtStatPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..11111) -- range added by Jing
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The EVC or ECE index."
|
|
::= { tnEvcExtStatEntry 3 }
|
|
|
|
tnEvcExtStatGreenFrameRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Frames of green received."
|
|
::= { tnEvcExtStatEntry 4 }
|
|
|
|
tnEvcExtStatGreenFrameTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Frames of green transmitted."
|
|
::= { tnEvcExtStatEntry 5 }
|
|
|
|
tnEvcExtStatGreenBytesRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Bytes of green received."
|
|
::= { tnEvcExtStatEntry 6 }
|
|
|
|
tnEvcExtStatGreenBytesTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Bytes of green transmitted."
|
|
::= { tnEvcExtStatEntry 7 }
|
|
|
|
tnEvcExtStatYellowFrameRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Frames of yellow received."
|
|
::= { tnEvcExtStatEntry 8 }
|
|
|
|
tnEvcExtStatYellowFrameTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Frames of yellow transmitted."
|
|
::= { tnEvcExtStatEntry 9 }
|
|
|
|
tnEvcExtStatYellowBytesRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Bytes of yellow received."
|
|
::= { tnEvcExtStatEntry 10 }
|
|
|
|
tnEvcExtStatYellowBytesTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Bytes of yellow transmitted."
|
|
::= { tnEvcExtStatEntry 11 }
|
|
|
|
tnEvcExtStatRedFrameRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Frames of red received."
|
|
::= { tnEvcExtStatEntry 12 }
|
|
|
|
tnEvcExtStatRedBytesRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Bytes of red received."
|
|
::= { tnEvcExtStatEntry 13 }
|
|
|
|
tnEvcExtStatDiscardFrameRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Frames of discarded received."
|
|
::= { tnEvcExtStatEntry 14 }
|
|
|
|
tnEvcExtStatDiscardFrameTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Frames of discarded transmitted."
|
|
::= { tnEvcExtStatEntry 15 }
|
|
|
|
tnEvcExtStatDiscardBytesRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Bytes of discarded received."
|
|
::= { tnEvcExtStatEntry 16 }
|
|
|
|
tnEvcExtStatDiscardBytesTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number Bytes of discarded transmitted."
|
|
::= { tnEvcExtStatEntry 17 }
|
|
|
|
tnEvcExtStatclear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear the value by EVC or ECE index."
|
|
::= { tnEvcExtStatEntry 18 }
|
|
|
|
--
|
|
-- Ethernet Service Interface L2CP Table
|
|
--
|
|
|
|
tnEvcL2cpCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnEvcL2cpCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports L2CP settings."
|
|
::= { tnEvcL2cpMgmtGroup 3 }
|
|
|
|
tnEvcL2cpCfgEntry OBJECT-TYPE
|
|
SYNTAX TnEvcL2cpCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"L2CP settings table entry."
|
|
INDEX { tnEvcL2cpCfgInterfaceNumber, tnEvcL2cpCfgIndex }
|
|
::= { tnEvcL2cpCfgTable 1 }
|
|
|
|
TnEvcL2cpCfgEntry ::= SEQUENCE {
|
|
tnEvcL2cpCfgInterfaceNumber Unsigned32,
|
|
tnEvcL2cpCfgIndex Unsigned32,
|
|
tnEvcL2cpCfgType INTEGER,
|
|
tnEvcL2cpCfgMatchScope INTEGER,
|
|
tnEvcL2cpCfgMacAddress MacAddress,
|
|
tnEvcL2cpCfgProtocol Unsigned32,
|
|
tnEvcL2cpCfgSubType Unsigned32,
|
|
tnEvcL2cpCfgEvcName OCTET STRING,
|
|
tnEvcL2cpCfgValid INTEGER,
|
|
tnEvcL2cpCfgRowStatus RowStatus
|
|
}
|
|
|
|
|
|
tnEvcL2cpCfgInterfaceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP interface number."
|
|
::= { tnEvcL2cpCfgEntry 1 }
|
|
|
|
tnEvcL2cpCfgIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP index number on an interface."
|
|
::= { tnEvcL2cpCfgEntry 2 }
|
|
|
|
tnEvcL2cpCfgType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
discard (1),
|
|
tunnel (2),
|
|
peer (3),
|
|
passToEvc (4),
|
|
peerToEvc (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP type setting."
|
|
::= { tnEvcL2cpCfgEntry 3 }
|
|
|
|
tnEvcL2cpCfgMatchScope OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
destinationAddressOnly (1),
|
|
daPlusProtocol (2),
|
|
daPlusProtocolPlusSubtype (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP selection matching scope."
|
|
::= { tnEvcL2cpCfgEntry 4 }
|
|
|
|
tnEvcL2cpCfgMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP Destination MAC address."
|
|
::= { tnEvcL2cpCfgEntry 5 }
|
|
|
|
tnEvcL2cpCfgProtocol OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP protocol."
|
|
::= { tnEvcL2cpCfgEntry 6 }
|
|
|
|
tnEvcL2cpCfgSubType OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP subtype for the protocol selected."
|
|
::= { tnEvcL2cpCfgEntry 7 }
|
|
|
|
tnEvcL2cpCfgEvcName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..45))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP EVC association."
|
|
::= { tnEvcL2cpCfgEntry 8 }
|
|
|
|
tnEvcL2cpCfgValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid (1),
|
|
valid (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets L2CP valid instance."
|
|
::= { tnEvcL2cpCfgEntry 9 }
|
|
|
|
tnEvcL2cpCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row.
|
|
|
|
The writable columns in a row cannot be changed if the row
|
|
is active. All columns must have a valid value before a row
|
|
can be activated.
|
|
"
|
|
::= { tnEvcL2cpCfgEntry 10 }
|
|
---
|
|
-- conformance information
|
|
tnEvcConformance OBJECT IDENTIFIER ::= { tnEvcObjects 8 }
|
|
tnEvcGroups OBJECT IDENTIFIER ::= { tnEvcConformance 1 }
|
|
-- MIB groupings
|
|
tnEvcPortConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tnEvcPortDEIMode,
|
|
tnEvcPortTagMode,
|
|
tnEvcPortAddressMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure or
|
|
describe the configuration or behavior of the S3280."
|
|
::= { tnEvcGroups 1 }
|
|
tnEvcJaguarPortConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tnEvcPortDEIMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure or
|
|
describe the configuration or behavior of the S4140."
|
|
::= { tnEvcGroups 2 }
|
|
tnEvcTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tnEvcNNIPortlist,
|
|
tnEvcVid,
|
|
tnEvcIVid,
|
|
tnEvcLearning,
|
|
tnEvcPolicerID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure or
|
|
describe the configuration or behavior of the S4140."
|
|
::= { tnEvcGroups 3 }
|
|
END
|