Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
293 lines
11 KiB
Text
293 lines
11 KiB
Text
VPLS-BGP-DRAFT-01-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Unsigned32, transmission
|
|
FROM SNMPv2-SMI -- RFC2578
|
|
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF -- RFC2580
|
|
|
|
RowStatus, StorageType, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC -- RFC2579
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC3411
|
|
|
|
jnxExperiment
|
|
FROM JUNIPER-SMI
|
|
|
|
jnxVplsConfigIndex, jnxVplsPwBindIndex
|
|
FROM VPLS-GENERIC-DRAFT-01-MIB;
|
|
|
|
jnxVplsBgpDraft01MIB MODULE-IDENTITY
|
|
LAST-UPDATED "200612061200Z" -- 06 Dec 2006 12:00:00 GMT
|
|
ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN)
|
|
Working Group"
|
|
CONTACT-INFO
|
|
"
|
|
V. J. Shah
|
|
Email: vshah@juniper.net
|
|
|
|
The L2VPN Working Group (email distribution l2vpn@ietf.org,
|
|
http://www.ietf.org/html.charters/l2vpn-charter.html)
|
|
"
|
|
DESCRIPTION
|
|
"Copyright (C) The IETF Trust (2010). The initial
|
|
version of this MIB module was published in RFC XXXX.
|
|
-- RFC Editor: Please replace XXXX with RFC number & remove
|
|
-- this note.
|
|
|
|
For full legal notices see the RFC itself or see:
|
|
http://www.ietf.org/copyrights/ianamib.html
|
|
|
|
This MIB module contains managed object definitions for
|
|
BGP signalled Virtual Private LAN Services as in
|
|
[RFC4761]
|
|
|
|
This MIB module enables the use of any underlying PseudoWire
|
|
network. "
|
|
|
|
-- Revision history.
|
|
REVISION
|
|
"200612061200Z" -- 06 Dec 2006 12:00:00 GMT
|
|
DESCRIPTION "Initial version published as part of RFC YYYY."
|
|
-- RFC Editor: please replace YYYY with IANA assigned value, and
|
|
-- delete this note.
|
|
::= { jnxExperiment 10 }
|
|
-- RFC Editor: please replace XXXX with IANA assigne value, and
|
|
-- delete this note.
|
|
|
|
-- VPLS BGP specific Textual Conventions.
|
|
|
|
-- JnxVplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Syntax for a route distinguisher. For a complete
|
|
-- definition of a route distinguisher, see [RFC4364].
|
|
-- For more details on use of a route distinguisher
|
|
-- for a VPLS service, see [RFC4761]"
|
|
-- REFERENCE
|
|
-- "[RFC4364]"
|
|
-- SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
-- JnxVplsBgpRouteTarget ::= TEXTUAL-CONVENTION
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Syntax for a route target. For a complete
|
|
-- definition of a route target, see [RFC4364]."
|
|
-- REFERENCE
|
|
-- "[RFC4364]"
|
|
-- SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
-- Top-level components of this MIB.
|
|
|
|
-- Tables, Scalars
|
|
jnxVplsBgpObjects OBJECT IDENTIFIER
|
|
::= { jnxVplsBgpDraft01MIB 1 }
|
|
-- Conformance
|
|
jnxVplsBgpConformance OBJECT IDENTIFIER
|
|
::= { jnxVplsBgpDraft01MIB 2 }
|
|
|
|
-- Vpls Bgp Config Table
|
|
|
|
jnxVplsBgpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsBgpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information for configuring
|
|
and monitoring BGP specific parameters for
|
|
Virtual Private Lan Services(VPLS)."
|
|
::= { jnxVplsBgpObjects 1 }
|
|
|
|
jnxVplsBgpConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents BGP specific information
|
|
for Virtual Private Lan Service(VPLS) in a packet network.
|
|
It is indexed by jnxVplsConfigIndex, which uniquely
|
|
identifies a single instance of a VPLS service.
|
|
|
|
A row is automatically created when a VPLS service is
|
|
configured using BGP signalling.
|
|
|
|
None of the read-create objects values can be
|
|
changed when jnxVplsRowStatus is in the active(1)
|
|
state. Changes are allowed when the jnxVplsRowStatus
|
|
is in notInService(2) or notReady(3) states only.
|
|
If the operator need to change one of the values
|
|
for an active row the jnxVplsConfigRowStatus should be
|
|
first changed to notInService(2), the objects may
|
|
be changed now, and later to active(1) in order to
|
|
re-initiate the signaling process with the new
|
|
values in effect.
|
|
"
|
|
INDEX { jnxVplsConfigIndex }
|
|
::= { jnxVplsBgpConfigTable 1 }
|
|
|
|
JnxVplsBgpConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsBgpConfigVERangeSize Unsigned32
|
|
}
|
|
|
|
jnxVplsBgpConfigVERangeSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the size of the range of VE ids in this
|
|
VPLS service. This number controls the size of the
|
|
label block advertised for this VE by the PE.
|
|
A value of 0 indicates that the range is not
|
|
configured and the PE derives the range value
|
|
from received advertisements from other PEs."
|
|
DEFVAL { 0 }
|
|
::= { jnxVplsBgpConfigEntry 1 }
|
|
|
|
-- Vpls Edge Device (VE) Identifier Table
|
|
|
|
jnxVplsBgpVETable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsBgpVEEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table associates VPLS Edge devices to a VPLS service"
|
|
::= { jnxVplsBgpObjects 2 }
|
|
|
|
jnxVplsBgpVEEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpVEEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created for each VE Id
|
|
configured on a PE for a particular VPLS service
|
|
instance."
|
|
INDEX { jnxVplsConfigIndex, jnxVplsBgpVEId }
|
|
::= { jnxVplsBgpVETable 1 }
|
|
|
|
JnxVplsBgpVEEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsBgpVEId Unsigned32,
|
|
jnxVplsBgpVEName SnmpAdminString,
|
|
jnxVplsBgpVEPreference Unsigned32,
|
|
jnxVplsBgpVERowStatus RowStatus,
|
|
jnxVplsBgpVEStorageType StorageType
|
|
}
|
|
|
|
jnxVplsBgpVEId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A secondary index identifying a VE within an
|
|
instance of a VPLS service."
|
|
::= { jnxVplsBgpVEEntry 1 }
|
|
|
|
jnxVplsBgpVEName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Descriptive name for the site or u-PE assciated with
|
|
this VE Id."
|
|
DEFVAL { "" }
|
|
::= { jnxVplsBgpVEEntry 2 }
|
|
|
|
jnxVplsBgpVEPreference OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the preference of the VE Id on this PE
|
|
if the site is multi-homed and VE Id is re-used."
|
|
DEFVAL { 0 }
|
|
::= { jnxVplsBgpVEEntry 3 }
|
|
|
|
jnxVplsBgpVERowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. When a row in this
|
|
table is in active(1) state, no objects in that row
|
|
can be modified except jnxVplsBgpSiteRowStatus."
|
|
::= { jnxVplsBgpVEEntry 5 }
|
|
|
|
jnxVplsBgpVEStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this row."
|
|
DEFVAL { volatile }
|
|
::= { jnxVplsBgpVEEntry 6 }
|
|
|
|
-- VPLS BGP PW Binding Table
|
|
|
|
jnxVplsBgpPwBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsBgpPwBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides BGP specific information for
|
|
an association between a VPLS service and the
|
|
corresponding Pseudo Wires. A service can have more
|
|
than one Pseudo Wire association. Pseudo Wires are
|
|
defined in the pwTable."
|
|
::= { jnxVplsBgpObjects 3 }
|
|
|
|
jnxVplsBgpPwBindEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpPwBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row represents an association between a
|
|
VPLS instance and one or more Pseudo Wires
|
|
defined in the pwTable. Each index is unique
|
|
in describing an entry in this table. However
|
|
both indexes are required to define the one
|
|
to many association of service to pseudowire.
|
|
|
|
An entry in this table in instantiated only when
|
|
BGP signalling is used to configure VPLS service.
|
|
|
|
Each entry in this table provides BGP specific
|
|
information for the VPlS represented by
|
|
jnxVplsConfigIndex."
|
|
INDEX { jnxVplsConfigIndex, jnxVplsPwBindIndex }
|
|
::= { jnxVplsBgpPwBindTable 1 }
|
|
|
|
JnxVplsBgpPwBindEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsBgpPwBindLocalVEId Unsigned32,
|
|
jnxVplsBgpPwBindRemoteVEId Unsigned32
|
|
}
|
|
|
|
|
|
|
|
jnxVplsBgpPwBindLocalVEId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the local VE that this Pseudo Wire
|
|
is associated with."
|
|
::= { jnxVplsBgpPwBindEntry 1 }
|
|
|
|
jnxVplsBgpPwBindRemoteVEId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the remote VE that this Pseudo Wire
|
|
is associated with."
|
|
::= { jnxVplsBgpPwBindEntry 2 }
|
|
|
|
END
|
|
|