graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/junos/PCE-PCEP-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1952 lines
72 KiB
Text
Raw Permalink Blame History

PCE-PCEP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
mib-2,
NOTIFICATION-TYPE,
Unsigned32,
Counter32
FROM SNMPv2-SMI -- RFC 2578
TruthValue,
TimeStamp
FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB; -- RFC 4001
pcePcepMIB MODULE-IDENTITY
LAST-UPDATED
"201412171200Z" -- 17 December 2014
ORGANIZATION
"IETF Path Computation Element (PCE) Working Group"
CONTACT-INFO
"Email: pce@ietf.org
WG charter:
http://datatracker.ietf.org/wg/pce/charter/"
DESCRIPTION
"This MIB module defines a collection of objects for managing
the Path Computation Element Communication Protocol (PCEP).
Copyright (c) 2014 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info)."
REVISION
"201412171200Z" -- 17 December 2014
DESCRIPTION
"Initial version, published as RFC 7420."
::= { mib-2 227 }
pcePcepNotifications OBJECT IDENTIFIER ::= { pcePcepMIB 0 }
pcePcepObjects OBJECT IDENTIFIER ::= { pcePcepMIB 1 }
pcePcepConformance OBJECT IDENTIFIER ::= { pcePcepMIB 2 }
--
-- PCEP Entity Objects
--
pcePcepEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about local PCEP entities.
The entries in this table are read-only."
::= { pcePcepObjects 1 }
pcePcepEntityEntry OBJECT-TYPE
SYNTAX PcePcepEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a local PCEP entity."
INDEX { pcePcepEntityIndex }
::= { pcePcepEntityTable 1 }
PcePcepEntityEntry ::= SEQUENCE {
pcePcepEntityIndex Unsigned32,
pcePcepEntityAdminStatus INTEGER,
pcePcepEntityOperStatus INTEGER,
pcePcepEntityAddrType InetAddressType,
pcePcepEntityAddr InetAddress,
pcePcepEntityConnectTimer Unsigned32,
pcePcepEntityConnectMaxRetry Unsigned32,
pcePcepEntityInitBackoffTimer Unsigned32,
pcePcepEntityMaxBackoffTimer Unsigned32,
pcePcepEntityOpenWaitTimer Unsigned32,
pcePcepEntityKeepWaitTimer Unsigned32,
pcePcepEntityKeepAliveTimer Unsigned32,
pcePcepEntityDeadTimer Unsigned32,
pcePcepEntityAllowNegotiation TruthValue,
pcePcepEntityMaxKeepAliveTimer Unsigned32,
pcePcepEntityMaxDeadTimer Unsigned32,
pcePcepEntityMinKeepAliveTimer Unsigned32,
pcePcepEntityMinDeadTimer Unsigned32,
pcePcepEntitySyncTimer Unsigned32,
pcePcepEntityRequestTimer Unsigned32,
pcePcepEntityMaxSessions Unsigned32,
pcePcepEntityMaxUnknownReqs Unsigned32,
pcePcepEntityMaxUnknownMsgs Unsigned32
}
pcePcepEntityIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is used to uniquely identify the PCEP entity."
::= { pcePcepEntityEntry 1 }
pcePcepEntityAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
adminStatusUp(1),
adminStatusDown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status of this PCEP entity.
This is the desired operational status as currently set by
an operator or by default in the implementation. The value
of pcePcepEntityOperStatus represents the current status of
an attempt to reach this desired status."
::= { pcePcepEntityEntry 2 }
pcePcepEntityOperStatus OBJECT-TYPE
SYNTAX INTEGER {
operStatusUp(1),
operStatusDown(2),
operStatusGoingUp(3),
operStatusGoingDown(4),
operStatusFailed(5),
operStatusFailedPerm(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the PCEP entity. It takes one of
the following values.
- operStatusUp(1): the PCEP entity is active.
- operStatusDown(2): the PCEP entity is inactive.
- operStatusGoingUp(3): the PCEP entity is activating.
- operStatusGoingDown(4): the PCEP entity is deactivating.
- operStatusFailed(5): the PCEP entity has failed and will
recover when possible.
- operStatusFailedPerm(6): the PCEP entity has failed and
will not recover without operator intervention."
::= { pcePcepEntityEntry 3 }
pcePcepEntityAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the PCEP entity's Internet address. This object
specifies how the value of the pcePcepEntityAddr object
should be interpreted. Only values unknown(0), ipv4(1), or
ipv6(2) are supported."
::= { pcePcepEntityEntry 4 }
pcePcepEntityAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local Internet address of this PCEP entity. The type is
given by pcePcepEntityAddrType.
If operating as a PCE server, the PCEP entity listens on
this address. If operating as a PCC, the PCEP entity binds
outgoing TCP connections to this address.
It is possible for the PCEP entity to operate both as a PCC
and a PCE server, in which case it uses this address both to
listen for incoming TCP connections and to bind outgoing
TCP connections."
::= { pcePcepEntityEntry 5 }
pcePcepEntityConnectTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the PCEP entity will wait to establish a TCP
connection with a peer. If a TCP connection is not
established within this time, then PCEP aborts the session
setup attempt."
::= { pcePcepEntityEntry 6 }
pcePcepEntityConnectMaxRetry OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of times the system tries to establish
a TCP connection to a peer before the session with the peer
transitions to the idle state.
When the session transitions to the idle state:
- pcePcepPeerSessionExists transitions to false(2).
- the associated PcePcepSessEntry is deleted.
- a backoff timer runs before the session is tried again."
::= { pcePcepEntityEntry 7 }
pcePcepEntityInitBackoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The initial backoff time for retrying a failed session
setup attempt to a peer.
The backoff time increases for each failed session setup
attempt, until a maximum backoff time is reached. The
maximum backoff time is pcePcepEntityMaxBackoffTimer."
::= { pcePcepEntityEntry 8 }
pcePcepEntityMaxBackoffTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum backoff time for retrying a failed session
setup attempt to a peer.
The backoff time increases for each failed session setup
attempt, until this maximum value is reached. Session
setup attempts then repeats periodically without any
further increase in backoff time."
::= { pcePcepEntityEntry 9 }
pcePcepEntityOpenWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the PCEP entity will wait to receive an Open
message from a peer after the TCP connection has come up.
If no Open message is received within this time, then PCEP
terminates the TCP connection and deletes the associated
PcePcepSessEntry."
::= { pcePcepEntityEntry 10 }
pcePcepEntityKeepWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the PCEP entity will wait to receive a
Keepalive or PCErr message from a peer during session
initialization after receiving an Open message. If no
Keepalive or PCErr message is received within this time,
then PCEP terminates the TCP connection and deletes the
associated PcePcepSessEntry."
::= { pcePcepEntityEntry 11 }
pcePcepEntityKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Keepalive transmission timer that this PCEP entity will
propose in the initial OPEN message of each session it is
involved in. This is the maximum time between two
consecutive messages sent to a peer. Zero means that
the PCEP entity prefers not to send Keepalives at all.
Note that the actual Keepalive transmission intervals, in
either direction of an active PCEP session, are determined
by negotiation between the peers as specified by RFC
5440, and so may differ from this configured value. For
the actually negotiated values (per session), see
pcePcepSessKeepaliveTimer and
pcePcepSessPeerKeepaliveTimer."
::= { pcePcepEntityEntry 12 }
pcePcepEntityDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DeadTimer that this PCEP entity will propose in the
initial OPEN message of each session it is involved in.
This is the time after which a peer should declare a
session down if it does not receive any PCEP messages.
Zero suggests that the peer does not run a DeadTimer at
all."
::= { pcePcepEntityEntry 13 }
pcePcepEntityAllowNegotiation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the PCEP entity will permit negotiation of session
parameters."
::= { pcePcepEntityEntry 14 }
pcePcepEntityMaxKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In PCEP session parameter negotiation, the maximum value
that this PCEP entity will accept from a peer for the
interval between Keepalive transmissions. Zero means that
the PCEP entity will allow no Keepalive transmission at
all."
::= { pcePcepEntityEntry 15 }
pcePcepEntityMaxDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In PCEP session parameter negotiation, the maximum value
that this PCEP entity will accept from a peer for the
DeadTimer. Zero means that the PCEP entity will allow not
running a DeadTimer."
::= { pcePcepEntityEntry 16 }
pcePcepEntityMinKeepAliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In PCEP session parameter negotiation, the minimum value
that this PCEP entity will accept for the interval between
Keepalive transmissions. Zero means that the PCEP entity
insists on no Keepalive transmission at all."
::= { pcePcepEntityEntry 17 }
pcePcepEntityMinDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In PCEP session parameter negotiation, the minimum value
that this PCEP entity will accept for the DeadTimer. Zero
means that the PCEP entity insists on not running a
DeadTimer."
::= { pcePcepEntityEntry 18 }
pcePcepEntitySyncTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of SyncTimer is used in the case of a synchronized
path computation request using the SVEC object.
Consider the case where a PCReq message is received by a PCE
that contains the SVEC object referring to M synchronized
path computation requests. If after the expiration of the
SyncTimer all the M path computation requests have not been
received, a protocol error is triggered and the PCE MUST
cancel the whole set of path computation requests.
The aim of the SyncTimer is to avoid the storage of unused
synchronized requests should one of them get lost for some
reason (for example, a misbehaving PCC).
A value of zero is returned if and only if the entity does
not use the SyncTimer."
::= { pcePcepEntityEntry 19 }
pcePcepEntityRequestTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum time that the PCEP entity will wait for a
response to a PCReq message."
::= { pcePcepEntityEntry 20 }
pcePcepEntityMaxSessions OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of sessions involving this PCEP entity
that can exist at any time."
::= { pcePcepEntityEntry 21 }
pcePcepEntityMaxUnknownReqs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of unrecognized requests and replies that
any session on this PCEP entity is willing to accept per
minute before terminating the session.
A PCRep message contains an unrecognized reply if it
contains an RP object whose request ID does not correspond
to any in-progress request sent by this PCEP entity.
A PCReq message contains an unrecognized request if it
contains an RP object whose request ID is zero."
::= { pcePcepEntityEntry 22 }
pcePcepEntityMaxUnknownMsgs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of unknown messages that any session
on this PCEP entity is willing to accept per minute before
terminating the session."
::= { pcePcepEntityEntry 23 }
--
-- The PCEP Peer Table
--
pcePcepPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about peers known by
the local PCEP entity. The entries in this table are
read-only.
This table gives peer information that spans PCEP
sessions. Information about current PCEP sessions can be
found in the pcePcepSessTable table."
::= { pcePcepObjects 2 }
pcePcepPeerEntry OBJECT-TYPE
SYNTAX PcePcepPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single peer that spans all PCEP
sessions to that peer."
INDEX { pcePcepEntityIndex,
pcePcepPeerAddrType,
pcePcepPeerAddr }
::= { pcePcepPeerTable 1 }
PcePcepPeerEntry ::= SEQUENCE {
pcePcepPeerAddrType InetAddressType,
pcePcepPeerAddr InetAddress,
pcePcepPeerRole INTEGER,
pcePcepPeerDiscontinuityTime TimeStamp,
pcePcepPeerInitiateSession TruthValue,
pcePcepPeerSessionExists TruthValue,
pcePcepPeerNumSessSetupOK Counter32,
pcePcepPeerNumSessSetupFail Counter32,
pcePcepPeerSessionUpTime TimeStamp,
pcePcepPeerSessionFailTime TimeStamp,
pcePcepPeerSessionFailUpTime TimeStamp,
pcePcepPeerAvgRspTime Unsigned32,
pcePcepPeerLWMRspTime Unsigned32,
pcePcepPeerHWMRspTime Unsigned32,
pcePcepPeerNumPCReqSent Counter32,
pcePcepPeerNumPCReqRcvd Counter32,
pcePcepPeerNumPCRepSent Counter32,
pcePcepPeerNumPCRepRcvd Counter32,
pcePcepPeerNumPCErrSent Counter32,
pcePcepPeerNumPCErrRcvd Counter32,
pcePcepPeerNumPCNtfSent Counter32,
pcePcepPeerNumPCNtfRcvd Counter32,
pcePcepPeerNumKeepaliveSent Counter32,
pcePcepPeerNumKeepaliveRcvd Counter32,
pcePcepPeerNumUnknownRcvd Counter32,
pcePcepPeerNumCorruptRcvd Counter32,
pcePcepPeerNumReqSent Counter32,
pcePcepPeerNumSvecSent Counter32,
pcePcepPeerNumSvecReqSent Counter32,
pcePcepPeerNumReqSentPendRep Counter32,
pcePcepPeerNumReqSentEroRcvd Counter32,
pcePcepPeerNumReqSentNoPathRcvd Counter32,
pcePcepPeerNumReqSentCancelRcvd Counter32,
pcePcepPeerNumReqSentErrorRcvd Counter32,
pcePcepPeerNumReqSentTimeout Counter32,
pcePcepPeerNumReqSentCancelSent Counter32,
pcePcepPeerNumReqSentClosed Counter32,
pcePcepPeerNumReqRcvd Counter32,
pcePcepPeerNumSvecRcvd Counter32,
pcePcepPeerNumSvecReqRcvd Counter32,
pcePcepPeerNumReqRcvdPendRep Counter32,
pcePcepPeerNumReqRcvdEroSent Counter32,
pcePcepPeerNumReqRcvdNoPathSent Counter32,
pcePcepPeerNumReqRcvdCancelSent Counter32,
pcePcepPeerNumReqRcvdErrorSent Counter32,
pcePcepPeerNumReqRcvdCancelRcvd Counter32,
pcePcepPeerNumReqRcvdClosed Counter32,
pcePcepPeerNumRepRcvdUnknown Counter32,
pcePcepPeerNumReqRcvdUnknown Counter32
}
pcePcepPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the peer's Internet address. This object
specifies how the value of the pcePcepPeerAddr object should
be interpreted. Only values unknown(0), ipv4(1), or
ipv6(2) are supported."
::= { pcePcepPeerEntry 1 }
pcePcepPeerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address of the peer. The type is given by
pcePcepPeerAddrType."
::= { pcePcepPeerEntry 2 }
pcePcepPeerRole OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
pcc(1),
pce(2),
pccAndPce(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role that this peer took the last time a session was
established. It takes one of the following values.
- unknown(0): this peer's role is not known.
- pcc(1): this peer is a Path Computation Client (PCC).
- pce(2): this peer is a Path Computation Element (PCE).
- pccAndPce(3): this peer is both a PCC and a PCE."
::= { pcePcepPeerEntry 3 }
pcePcepPeerDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time that the information and
statistics in this row were last reset."
::= { pcePcepPeerEntry 4 }
pcePcepPeerInitiateSession OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the local PCEP entity initiates sessions
to this peer or waits for the peer to initiate a session."
::= { pcePcepPeerEntry 5 }
pcePcepPeerSessionExists OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether a session with this peer currently
exists."
::= { pcePcepPeerEntry 6 }
pcePcepPeerNumSessSetupOK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCEP sessions successfully established with
the peer, including any current session. This counter is
incremented each time a session with this peer is
successfully established."
::= { pcePcepPeerEntry 7 }
pcePcepPeerNumSessSetupFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCEP sessions with the peer that have been
attempted but failed before being fully established.
This counter is incremented each time a session retry to
this peer fails."
::= { pcePcepPeerEntry 8 }
pcePcepPeerSessionUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime the last time a session with this
peer was successfully established.
If pcePcepPeerNumSessSetupOK is zero, then this object
contains zero."
::= { pcePcepPeerEntry 9 }
pcePcepPeerSessionFailTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime the last time a session with this
peer failed to be established.
If pcePcepPeerNumSessSetupFail is zero, then this object
contains zero."
::= { pcePcepPeerEntry 10 }
pcePcepPeerSessionFailUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime the last time a session with this
peer failed from active.
If pcePcepPeerNumSessSetupOK is zero, then this object
contains zero."
::= { pcePcepPeerEntry 11 }
pcePcepPeerAvgRspTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average response time for this peer.
If an average response time has not been calculated for this
peer, then this object has the value zero.
If pcePcepPeerRole is pcc, then this field is meaningless
and is set to zero."
::= { pcePcepPeerEntry 12 }
pcePcepPeerLWMRspTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The smallest (low-water mark) response time seen from this
peer.
If no responses have been received from this peer, then this
object has the value zero.
If pcePcepPeerRole is pcc, then this field is meaningless
and is set to zero."
::= { pcePcepPeerEntry 13 }
pcePcepPeerHWMRspTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The greatest (high-water mark) response time seen from this
peer.
If no responses have been received from this peer, then this
object has the value zero.
If pcePcepPeerRole is pcc, then this field is meaningless
and is set to zero."
::= { pcePcepPeerEntry 14 }
pcePcepPeerNumPCReqSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCReq messages sent to this peer."
::= { pcePcepPeerEntry 15 }
pcePcepPeerNumPCReqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCReq messages received from this peer."
::= { pcePcepPeerEntry 16 }
pcePcepPeerNumPCRepSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCRep messages sent to this peer."
::= { pcePcepPeerEntry 17 }
pcePcepPeerNumPCRepRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCRep messages received from this peer."
::= { pcePcepPeerEntry 18 }
pcePcepPeerNumPCErrSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCErr messages sent to this peer."
::= { pcePcepPeerEntry 19 }
pcePcepPeerNumPCErrRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCErr messages received from this peer."
::= { pcePcepPeerEntry 20 }
pcePcepPeerNumPCNtfSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCNtf messages sent to this peer."
::= { pcePcepPeerEntry 21 }
pcePcepPeerNumPCNtfRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCNtf messages received from this peer."
::= { pcePcepPeerEntry 22 }
pcePcepPeerNumKeepaliveSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Keepalive messages sent to this peer."
::= { pcePcepPeerEntry 23 }
pcePcepPeerNumKeepaliveRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Keepalive messages received from this peer."
::= { pcePcepPeerEntry 24 }
pcePcepPeerNumUnknownRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unknown messages received from this peer."
::= { pcePcepPeerEntry 25 }
pcePcepPeerNumCorruptRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of corrupted PCEP messages received from this
peer."
::= { pcePcepPeerEntry 26 }
pcePcepPeerNumReqSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests sent to this peer. A request
corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepPeerNumPCReqSent because
multiple requests can be batched into a single PCReq
message."
::= { pcePcepPeerEntry 27 }
pcePcepPeerNumSvecSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SVEC objects sent to this peer in PCReq
messages. An SVEC object represents a set of synchronized
requests."
::= { pcePcepPeerEntry 28 }
pcePcepPeerNumSvecReqSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests sent to this peer that appeared in
one or more SVEC objects."
::= { pcePcepPeerEntry 29 }
pcePcepPeerNumReqSentPendRep OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been sent to this peer for
which a response is still pending."
::= { pcePcepPeerEntry 30 }
pcePcepPeerNumReqSentEroRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been sent to this peer for
which a response with an ERO was
received. Such responses indicate that a path was
successfully computed by the peer."
::= { pcePcepPeerEntry 31 }
pcePcepPeerNumReqSentNoPathRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been sent to this peer for
which a response with a NO-PATH object was received. Such
responses indicate that the peer could not find a path to
satisfy the request."
::= { pcePcepPeerEntry 32 }
pcePcepPeerNumReqSentCancelRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that were canceled by the peer with
a PCNtf message.
This might be different than pcePcepPeerNumPCNtfRcvd because
not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests."
::= { pcePcepPeerEntry 33 }
pcePcepPeerNumReqSentErrorRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that were rejected by the peer with a
PCErr message.
This might be different than pcePcepPeerNumPCErrRcvd because
not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests."
::= { pcePcepPeerEntry 34 }
pcePcepPeerNumReqSentTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been sent to a peer and
have been abandoned because the peer has taken too long to
respond to them."
::= { pcePcepPeerEntry 35 }
pcePcepPeerNumReqSentCancelSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that were sent to the peer and
explicitly canceled by the local PCEP entity sending a
PCNtf."
::= { pcePcepPeerEntry 36 }
pcePcepPeerNumReqSentClosed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that were sent to the peer and
implicitly canceled when the session they were sent over was
closed."
::= { pcePcepPeerEntry 37 }
pcePcepPeerNumReqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests received from this peer. A request
corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepPeerNumPCReqRcvd because
multiple requests can be batched into a single PCReq
message."
::= { pcePcepPeerEntry 38 }
pcePcepPeerNumSvecRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SVEC objects received from this peer in PCReq
messages. An SVEC object represents a set of synchronized
requests."
::= { pcePcepPeerEntry 39 }
pcePcepPeerNumSvecReqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests received from this peer that appeared
in one or more SVEC objects."
::= { pcePcepPeerEntry 40 }
pcePcepPeerNumReqRcvdPendRep OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been received from this
peer for which a response is still pending."
::= { pcePcepPeerEntry 41 }
pcePcepPeerNumReqRcvdEroSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been received from this
peer for which a response with an ERO was sent. Such
responses indicate that a path was successfully computed by
the local PCEP entity."
::= { pcePcepPeerEntry 42 }
pcePcepPeerNumReqRcvdNoPathSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been received from this
peer for which a response with a NO-PATH object was sent.
Such responses indicate that the local PCEP entity could
not find a path to satisfy the request."
::= { pcePcepPeerEntry 43 }
pcePcepPeerNumReqRcvdCancelSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests received from this peer that were
canceled by the local PCEP entity sending a PCNtf message.
This might be different than pcePcepPeerNumPCNtfSent because
not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests."
::= { pcePcepPeerEntry 44 }
pcePcepPeerNumReqRcvdErrorSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests received from this peer that were
rejected by the local PCEP entity sending a PCErr message.
This might be different than pcePcepPeerNumPCErrSent because
not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests."
::= { pcePcepPeerEntry 45 }
pcePcepPeerNumReqRcvdCancelRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that were received from the peer and
explicitly canceled by the peer sending a PCNtf."
::= { pcePcepPeerEntry 46 }
pcePcepPeerNumReqRcvdClosed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that were received from the peer and
implicitly canceled when the session they were received over
was closed."
::= { pcePcepPeerEntry 47 }
pcePcepPeerNumRepRcvdUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of responses to unknown requests received from
this peer. A response to an unknown request is a response
whose RP object does not contain the request ID of any
request that is currently outstanding on the session."
::= { pcePcepPeerEntry 48 }
pcePcepPeerNumReqRcvdUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unknown requests that have been received from
a peer. An unknown request is a request whose RP object
contains a request ID of zero."
::= { pcePcepPeerEntry 49 }
--
-- The PCEP Sessions Table
--
pcePcepSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF PcePcepSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of PCEP sessions that involve the local PCEP
entity. Each entry in this table represents a single
session. The entries in this table are read-only.
An entry appears in this table when the corresponding PCEP
session transitions out of idle state. If the PCEP session
transitions back into an idle state, then the corresponding
entry in this table is removed."
::= { pcePcepObjects 3 }
pcePcepSessEntry OBJECT-TYPE
SYNTAX PcePcepSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a single PCEP session in which the
local PCEP entity participates.
This entry exists only if the corresponding PCEP session has
been initialized by some event, such as manual user
configuration, auto-discovery of a peer, or an incoming TCP
connection."
INDEX { pcePcepEntityIndex,
pcePcepPeerAddrType,
pcePcepPeerAddr,
pcePcepSessInitiator }
::= { pcePcepSessTable 1 }
PcePcepSessEntry ::= SEQUENCE {
pcePcepSessInitiator INTEGER,
pcePcepSessStateLastChange TimeStamp,
pcePcepSessState INTEGER,
pcePcepSessConnectRetry Counter32,
pcePcepSessLocalID Unsigned32,
pcePcepSessRemoteID Unsigned32,
pcePcepSessKeepaliveTimer Unsigned32,
pcePcepSessPeerKeepaliveTimer Unsigned32,
pcePcepSessDeadTimer Unsigned32,
pcePcepSessPeerDeadTimer Unsigned32,
pcePcepSessKAHoldTimeRem Unsigned32,
pcePcepSessOverloaded TruthValue,
pcePcepSessOverloadTime Unsigned32,
pcePcepSessPeerOverloaded TruthValue,
pcePcepSessPeerOverloadTime Unsigned32,
pcePcepSessDiscontinuityTime TimeStamp,
pcePcepSessAvgRspTime Unsigned32,
pcePcepSessLWMRspTime Unsigned32,
pcePcepSessHWMRspTime Unsigned32,
pcePcepSessNumPCReqSent Counter32,
pcePcepSessNumPCReqRcvd Counter32,
pcePcepSessNumPCRepSent Counter32,
pcePcepSessNumPCRepRcvd Counter32,
pcePcepSessNumPCErrSent Counter32,
pcePcepSessNumPCErrRcvd Counter32,
pcePcepSessNumPCNtfSent Counter32,
pcePcepSessNumPCNtfRcvd Counter32,
pcePcepSessNumKeepaliveSent Counter32,
pcePcepSessNumKeepaliveRcvd Counter32,
pcePcepSessNumUnknownRcvd Counter32,
pcePcepSessNumCorruptRcvd Counter32,
pcePcepSessNumReqSent Counter32,
pcePcepSessNumSvecSent Counter32,
pcePcepSessNumSvecReqSent Counter32,
pcePcepSessNumReqSentPendRep Counter32,
pcePcepSessNumReqSentEroRcvd Counter32,
pcePcepSessNumReqSentNoPathRcvd Counter32,
pcePcepSessNumReqSentCancelRcvd Counter32,
pcePcepSessNumReqSentErrorRcvd Counter32,
pcePcepSessNumReqSentTimeout Counter32,
pcePcepSessNumReqSentCancelSent Counter32,
pcePcepSessNumReqRcvd Counter32,
pcePcepSessNumSvecRcvd Counter32,
pcePcepSessNumSvecReqRcvd Counter32,
pcePcepSessNumReqRcvdPendRep Counter32,
pcePcepSessNumReqRcvdEroSent Counter32,
pcePcepSessNumReqRcvdNoPathSent Counter32,
pcePcepSessNumReqRcvdCancelSent Counter32,
pcePcepSessNumReqRcvdErrorSent Counter32,
pcePcepSessNumReqRcvdCancelRcvd Counter32,
pcePcepSessNumRepRcvdUnknown Counter32,
pcePcepSessNumReqRcvdUnknown Counter32
}
pcePcepSessInitiator OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remote(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The initiator of the session; that is, whether the TCP
connection was initiated by the local PCEP entity or the
peer.
There is a window during session initialization where two
sessions can exist between a pair of PCEP speakers, each
initiated by one of the speakers. One of these sessions is
always discarded before it leaves OpenWait state. However,
before it is discarded, two sessions to the given peer
appear transiently in this MIB module. The sessions are
distinguished by who initiated them, and so this field is an
index for pcePcepSessTable."
::= { pcePcepSessEntry 1 }
pcePcepSessStateLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time this session entered its
current state as denoted by the pcePcepSessState object."
::= { pcePcepSessEntry 2 }
pcePcepSessState OBJECT-TYPE
SYNTAX INTEGER {
tcpPending(1),
openWait(2),
keepWait(3),
sessionUp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the session.
The set of possible states excludes the idle state since
entries do not exist in this table in the idle state."
::= { pcePcepSessEntry 3 }
pcePcepSessConnectRetry OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the local PCEP entity has
attempted to establish a TCP connection for this session
without success. The PCEP entity gives up when this
reaches pcePcepEntityConnectMaxRetry."
::= { pcePcepSessEntry 4 }
pcePcepSessLocalID OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the PCEP session ID used by the local PCEP
entity in the Open message for this session.
If pcePcepSessState is tcpPending, then this is the session
ID that will be used in the Open message. Otherwise, this
is the session ID that was sent in the Open message."
::= { pcePcepSessEntry 5 }
pcePcepSessRemoteID OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the PCEP session ID used by the peer in its
Open message for this session.
If pcePcepSessState is tcpPending or openWait, then this
field is not used and MUST be set to zero."
::= { pcePcepSessEntry 6 }
pcePcepSessKeepaliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The agreed maximum interval at which the local PCEP entity
transmits PCEP messages on this PCEP session. Zero means
that the local PCEP entity never sends Keepalives on this
session.
This field is used if and only if pcePcepSessState is
sessionUp. Otherwise, it is not used and MUST be set to
zero."
::= { pcePcepSessEntry 7 }
pcePcepSessPeerKeepaliveTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The agreed maximum interval at which the peer transmits PCEP
messages on this PCEP session. Zero means that the peer
never sends Keepalives on this session.
This field is used if and only if pcePcepSessState is
sessionUp. Otherwise, it is not used and MUST be set to
zero."
::= { pcePcepSessEntry 8 }
pcePcepSessDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DeadTimer interval for this PCEP session."
::= { pcePcepSessEntry 9 }
pcePcepSessPeerDeadTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's DeadTimer interval for this PCEP session.
If pcePcepSessState is tcpPending or openWait, then this
field is not used and MUST be set to zero."
::= { pcePcepSessEntry 10 }
pcePcepSessKAHoldTimeRem OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Keepalive hold time remaining for this session.
If pcePcepSessState is tcpPending or openWait, then this
field is not used and MUST be set to zero."
::= { pcePcepSessEntry 11 }
pcePcepSessOverloaded OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the local PCEP entity has informed the peer that it is
currently overloaded, then this is set to true. Otherwise,
it is set to false."
::= { pcePcepSessEntry 12 }
pcePcepSessOverloadTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval of time that is remaining until the local PCEP
entity will cease to be overloaded on this session.
This field is only used if pcePcepSessOverloaded is set to
true. Otherwise, it is not used and MUST be set to zero."
::= { pcePcepSessEntry 13 }
pcePcepSessPeerOverloaded OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the peer has informed the local PCEP entity that it is
currently overloaded, then this is set to true. Otherwise,
it is set to false."
::= { pcePcepSessEntry 14 }
pcePcepSessPeerOverloadTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval of time that is remaining until the peer will
cease to be overloaded. If it is not known how long the
peer will stay in overloaded state, this field is set to
zero.
This field is only used if pcePcepSessPeerOverloaded is set
to true. Otherwise, it is not used and MUST be set to
zero."
::= { pcePcepSessEntry 15 }
pcePcepSessDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time that the statistics in
this row were last reset."
::= { pcePcepSessEntry 16 }
pcePcepSessAvgRspTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average response time for this peer on this session.
If an average response time has not been calculated for this
peer, then this object has the value zero."
::= { pcePcepSessEntry 17 }
pcePcepSessLWMRspTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The smallest (low-water mark) response time seen from this
peer on this session.
If no responses have been received from this peer, then this
object has the value zero."
::= { pcePcepSessEntry 18 }
pcePcepSessHWMRspTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The greatest (high-water mark) response time seen from this
peer on this session.
If no responses have been received from this peer, then this
object has the value zero."
::= { pcePcepSessEntry 19 }
pcePcepSessNumPCReqSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCReq messages sent on this session."
::= { pcePcepSessEntry 20 }
pcePcepSessNumPCReqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCReq messages received on this session."
::= { pcePcepSessEntry 21 }
pcePcepSessNumPCRepSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCRep messages sent on this session."
::= { pcePcepSessEntry 22 }
pcePcepSessNumPCRepRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCRep messages received on this session."
::= { pcePcepSessEntry 23 }
pcePcepSessNumPCErrSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCErr messages sent on this session."
::= { pcePcepSessEntry 24 }
pcePcepSessNumPCErrRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCErr messages received on this session."
::= { pcePcepSessEntry 25 }
pcePcepSessNumPCNtfSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCNtf messages sent on this session."
::= { pcePcepSessEntry 26 }
pcePcepSessNumPCNtfRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCNtf messages received on this session."
::= { pcePcepSessEntry 27 }
pcePcepSessNumKeepaliveSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Keepalive messages sent on this session."
::= { pcePcepSessEntry 28 }
pcePcepSessNumKeepaliveRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Keepalive messages received on this session."
::= { pcePcepSessEntry 29 }
pcePcepSessNumUnknownRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unknown messages received on this session."
::= { pcePcepSessEntry 30 }
pcePcepSessNumCorruptRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of corrupted PCEP messages received on this
session."
::= { pcePcepSessEntry 31 }
pcePcepSessNumReqSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests sent on this session. A request
corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepSessNumPCReqSent because
multiple requests can be batched into a single PCReq
message."
::= { pcePcepSessEntry 32 }
pcePcepSessNumSvecSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SVEC objects sent on this session in PCReq
messages. An SVEC object represents a set of synchronized
requests."
::= { pcePcepSessEntry 33 }
pcePcepSessNumSvecReqSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests sent on this session that appeared in
one or more SVEC objects."
::= { pcePcepSessEntry 34 }
pcePcepSessNumReqSentPendRep OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been sent on this session
for which a response is still pending."
::= { pcePcepSessEntry 35 }
pcePcepSessNumReqSentEroRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful responses received on this session.
A response corresponds 1:1 with an RP object in a PCRep
message. A successful response is a response for which an
ERO was successfully computed."
::= { pcePcepSessEntry 36 }
pcePcepSessNumReqSentNoPathRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful responses received on this
session. A response corresponds 1:1 with an RP object in a
PCRep message. An unsuccessful response is a response with
a NO-PATH object."
::= { pcePcepSessEntry 37 }
pcePcepSessNumReqSentCancelRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests sent on this session that were
canceled by the peer with a PCNtf message.
This might be different than pcePcepSessNumPCNtfRcvd because
not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests."
::= { pcePcepSessEntry 38 }
pcePcepSessNumReqSentErrorRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests sent on this session that were
rejected by the peer with a PCErr message.
This might be different than pcePcepSessNumPCErrRcvd because
not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests."
::= { pcePcepSessEntry 39 }
pcePcepSessNumReqSentTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests sent on this session that have been
sent to a peer and have been abandoned because the peer has
taken too long to respond to them."
::= { pcePcepSessEntry 40 }
pcePcepSessNumReqSentCancelSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests sent on this session that were sent
to the peer and explicitly canceled by the local PCEP
entity sending a PCNtf."
::= { pcePcepSessEntry 41 }
pcePcepSessNumReqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests received on this session. A request
corresponds 1:1 with an RP object in a PCReq message.
This might be greater than pcePcepSessNumPCReqRcvd because
multiple requests can be batched into a single PCReq
message."
::= { pcePcepSessEntry 42 }
pcePcepSessNumSvecRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SVEC objects received on this session in PCReq
messages. An SVEC object represents a set of synchronized
requests."
::= { pcePcepSessEntry 43 }
pcePcepSessNumSvecReqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests received on this session that
appeared in one or more SVEC objects."
::= { pcePcepSessEntry 44 }
pcePcepSessNumReqRcvdPendRep OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that have been received on this
session for which a response is still pending."
::= { pcePcepSessEntry 45 }
pcePcepSessNumReqRcvdEroSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful responses sent on this session. A
response corresponds 1:1 with an RP object in a PCRep
message. A successful response is a response for which an
ERO was successfully computed."
::= { pcePcepSessEntry 46 }
pcePcepSessNumReqRcvdNoPathSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful responses sent on this session.
A response corresponds 1:1 with an RP object in a PCRep
message. An unsuccessful response is a response with a
NO-PATH object."
::= { pcePcepSessEntry 47 }
pcePcepSessNumReqRcvdCancelSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests received on this session that were
canceled by the local PCEP entity sending a PCNtf message.
This might be different than pcePcepSessNumPCNtfSent because
not all PCNtf messages are used to cancel requests, and a
single PCNtf message can cancel multiple requests."
::= { pcePcepSessEntry 48 }
pcePcepSessNumReqRcvdErrorSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests received on this session that were
rejected by the local PCEP entity sending a PCErr message.
This might be different than pcePcepSessNumPCErrSent because
not all PCErr messages are used to reject requests, and a
single PCErr message can reject multiple requests."
::= { pcePcepSessEntry 49 }
pcePcepSessNumReqRcvdCancelRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that were received on this session
and explicitly canceled by the peer sending a PCNtf."
::= { pcePcepSessEntry 50 }
pcePcepSessNumRepRcvdUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of responses to unknown requests received on this
session. A response to an unknown request is a response
whose RP object does not contain the request ID of any
request that is currently outstanding on the session."
::= { pcePcepSessEntry 51 }
pcePcepSessNumReqRcvdUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unknown requests that have been received on
this session. An unknown request is a request whose RP
object contains a request ID of zero."
::= { pcePcepSessEntry 52 }
---
--- Notifications Configuration
---
pcePcepNotificationsMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the maximum number of
notifications issued per second. If events occur
more rapidly, the implementation may simply fail to
emit these notifications during that period or may
queue them until an appropriate time. A value of zero
means no notifications are emitted and all should be
discarded (that is, not queued)."
::= { pcePcepObjects 4 }
---
--- Notifications
---
pcePcepSessUp NOTIFICATION-TYPE
OBJECTS {
pcePcepSessState,
pcePcepSessStateLastChange
}
STATUS current
DESCRIPTION
"This notification is sent when the value of
pcePcepSessState enters the sessionUp state."
::= { pcePcepNotifications 1 }
pcePcepSessDown NOTIFICATION-TYPE
OBJECTS {
pcePcepSessState,
pcePcepSessStateLastChange
}
STATUS current
DESCRIPTION
"This notification is sent when the value of
pcePcepSessState leaves the sessionUp state."
::= { pcePcepNotifications 2 }
pcePcepSessLocalOverload NOTIFICATION-TYPE
OBJECTS {
pcePcepSessOverloaded,
pcePcepSessOverloadTime
}
STATUS current
DESCRIPTION
"This notification is sent when the local PCEP entity enters
overload state for a peer."
::= { pcePcepNotifications 3 }
pcePcepSessLocalOverloadClear NOTIFICATION-TYPE
OBJECTS {
pcePcepSessOverloaded
}
STATUS current
DESCRIPTION
"This notification is sent when the local PCEP entity leaves
overload state for a peer."
::= { pcePcepNotifications 4 }
pcePcepSessPeerOverload NOTIFICATION-TYPE
OBJECTS {
pcePcepSessPeerOverloaded,
pcePcepSessPeerOverloadTime
}
STATUS current
DESCRIPTION
"This notification is sent when a peer enters overload
state."
::= { pcePcepNotifications 5 }
pcePcepSessPeerOverloadClear NOTIFICATION-TYPE
OBJECTS {
pcePcepSessPeerOverloaded
}
STATUS current
DESCRIPTION
"This notification is sent when a peer leaves overload
state."
::= { pcePcepNotifications 6 }
--
-- Module Conformance Statement
--
pcePcepCompliances
OBJECT IDENTIFIER ::= { pcePcepConformance 1 }
pcePcepGroups
OBJECT IDENTIFIER ::= { pcePcepConformance 2 }
--
-- Read-Only Compliance
--
pcePcepModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The module is implemented with support for read-only. In
other words, only monitoring is available by implementing
this MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS {
pcePcepGeneralGroup,
pcePcepNotificationsGroup
}
OBJECT pcePcepEntityAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION "Only unknown(0), ipv4(1), and ipv6(2) support
is required."
-- The following restriction is commented out because of a limitation
-- in SMIv2 which does not allow index objects to be restricted in
-- scope. Nevertheless, this object is intended to be restricted in
-- scope, as follows.
--
-- OBJECT pcePcepPeerAddrType
-- SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
-- DESCRIPTION "Only unknown(0), ipv4(1), and ipv6(2) support
-- is required."
::= { pcePcepCompliances 1 }
-- units of conformance
pcePcepGeneralGroup OBJECT-GROUP
OBJECTS { pcePcepEntityAdminStatus,
pcePcepEntityOperStatus,
pcePcepEntityAddrType,
pcePcepEntityAddr,
pcePcepEntityConnectTimer,
pcePcepEntityConnectMaxRetry,
pcePcepEntityInitBackoffTimer,
pcePcepEntityMaxBackoffTimer,
pcePcepEntityOpenWaitTimer,
pcePcepEntityKeepWaitTimer,
pcePcepEntityKeepAliveTimer,
pcePcepEntityDeadTimer,
pcePcepEntityAllowNegotiation,
pcePcepEntityMaxKeepAliveTimer,
pcePcepEntityMaxDeadTimer,
pcePcepEntityMinKeepAliveTimer,
pcePcepEntityMinDeadTimer,
pcePcepEntitySyncTimer,
pcePcepEntityRequestTimer,
pcePcepEntityMaxSessions,
pcePcepEntityMaxUnknownReqs,
pcePcepEntityMaxUnknownMsgs,
pcePcepPeerRole,
pcePcepPeerDiscontinuityTime,
pcePcepPeerInitiateSession,
pcePcepPeerSessionExists,
pcePcepPeerNumSessSetupOK,
pcePcepPeerNumSessSetupFail,
pcePcepPeerSessionUpTime,
pcePcepPeerSessionFailTime,
pcePcepPeerSessionFailUpTime,
pcePcepPeerAvgRspTime,
pcePcepPeerLWMRspTime,
pcePcepPeerHWMRspTime,
pcePcepPeerNumPCReqSent,
pcePcepPeerNumPCReqRcvd,
pcePcepPeerNumPCRepSent,
pcePcepPeerNumPCRepRcvd,
pcePcepPeerNumPCErrSent,
pcePcepPeerNumPCErrRcvd,
pcePcepPeerNumPCNtfSent,
pcePcepPeerNumPCNtfRcvd,
pcePcepPeerNumKeepaliveSent,
pcePcepPeerNumKeepaliveRcvd,
pcePcepPeerNumUnknownRcvd,
pcePcepPeerNumCorruptRcvd,
pcePcepPeerNumReqSent,
pcePcepPeerNumSvecSent,
pcePcepPeerNumSvecReqSent,
pcePcepPeerNumReqSentPendRep,
pcePcepPeerNumReqSentEroRcvd,
pcePcepPeerNumReqSentNoPathRcvd,
pcePcepPeerNumReqSentCancelRcvd,
pcePcepPeerNumReqSentErrorRcvd,
pcePcepPeerNumReqSentTimeout,
pcePcepPeerNumReqSentCancelSent,
pcePcepPeerNumReqSentClosed,
pcePcepPeerNumReqRcvd,
pcePcepPeerNumSvecRcvd,
pcePcepPeerNumSvecReqRcvd,
pcePcepPeerNumReqRcvdPendRep,
pcePcepPeerNumReqRcvdEroSent,
pcePcepPeerNumReqRcvdNoPathSent,
pcePcepPeerNumReqRcvdCancelSent,
pcePcepPeerNumReqRcvdErrorSent,
pcePcepPeerNumReqRcvdCancelRcvd,
pcePcepPeerNumReqRcvdClosed,
pcePcepPeerNumRepRcvdUnknown,
pcePcepPeerNumReqRcvdUnknown,
pcePcepSessStateLastChange,
pcePcepSessState,
pcePcepSessConnectRetry,
pcePcepSessLocalID,
pcePcepSessRemoteID,
pcePcepSessKeepaliveTimer,
pcePcepSessPeerKeepaliveTimer,
pcePcepSessDeadTimer,
pcePcepSessPeerDeadTimer,
pcePcepSessKAHoldTimeRem,
pcePcepSessOverloaded,
pcePcepSessOverloadTime,
pcePcepSessPeerOverloaded,
pcePcepSessPeerOverloadTime,
pcePcepSessDiscontinuityTime,
pcePcepSessAvgRspTime,
pcePcepSessLWMRspTime,
pcePcepSessHWMRspTime,
pcePcepSessNumPCReqSent,
pcePcepSessNumPCReqRcvd,
pcePcepSessNumPCRepSent,
pcePcepSessNumPCRepRcvd,
pcePcepSessNumPCErrSent,
pcePcepSessNumPCErrRcvd,
pcePcepSessNumPCNtfSent,
pcePcepSessNumPCNtfRcvd,
pcePcepSessNumKeepaliveSent,
pcePcepSessNumKeepaliveRcvd,
pcePcepSessNumUnknownRcvd,
pcePcepSessNumCorruptRcvd,
pcePcepSessNumReqSent,
pcePcepSessNumSvecSent,
pcePcepSessNumSvecReqSent,
pcePcepSessNumReqSentPendRep,
pcePcepSessNumReqSentEroRcvd,
pcePcepSessNumReqSentNoPathRcvd,
pcePcepSessNumReqSentCancelRcvd,
pcePcepSessNumReqSentErrorRcvd,
pcePcepSessNumReqSentTimeout,
pcePcepSessNumReqSentCancelSent,
pcePcepSessNumReqRcvd,
pcePcepSessNumSvecRcvd,
pcePcepSessNumSvecReqRcvd,
pcePcepSessNumReqRcvdPendRep,
pcePcepSessNumReqRcvdEroSent,
pcePcepSessNumReqRcvdNoPathSent,
pcePcepSessNumReqRcvdCancelSent,
pcePcepSessNumReqRcvdErrorSent,
pcePcepSessNumReqRcvdCancelRcvd,
pcePcepSessNumRepRcvdUnknown,
pcePcepSessNumReqRcvdUnknown,
pcePcepNotificationsMaxRate
}
STATUS current
DESCRIPTION
"Objects that apply to all PCEP MIB module implementations."
::= { pcePcepGroups 1 }
pcePcepNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { pcePcepSessUp,
pcePcepSessDown,
pcePcepSessLocalOverload,
pcePcepSessLocalOverloadClear,
pcePcepSessPeerOverload,
pcePcepSessPeerOverloadClear
}
STATUS current
DESCRIPTION
"The notifications for a PCEP MIB module implementation."
::= { pcePcepGroups 2 }
END
Reference in a new issue View git blame Copy permalink