Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1094 lines
37 KiB
Text
1094 lines
37 KiB
Text
MPLS-MLDP-STD-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Unsigned32, Counter32, Counter64, TimeTicks
|
|
FROM SNMPv2-SMI -- RFC 2578
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC 2580
|
|
TruthValue, RowStatus, StorageType, TimeStamp
|
|
FROM SNMPv2-TC -- RFC 2579
|
|
|
|
InterfaceIndex
|
|
FROM IF-MIB -- [RFC2020]
|
|
|
|
mplsStdMIB, MplsLdpIdentifier
|
|
FROM MPLS-TC-STD-MIB -- RFC 3811
|
|
|
|
MplsIndexType
|
|
FROM MPLS-LSR-STD-MIB -- RFC 3813
|
|
|
|
IndexInteger, IndexIntegerNextFree
|
|
FROM DIFFSERV-MIB -- RFC 3289
|
|
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB -- RFC 4001
|
|
|
|
mplsLdpStdMIB, mplsLdpEntityLdpId, mplsLdpEntityIndex, mplsLdpPeerLdpId, mplsLdpSessionStatsEntry
|
|
FROM MPLS-LDP-STD-MIB -- RFC 3815
|
|
|
|
jnxMldpExperiment -- *** JNX
|
|
FROM JUNIPER-EXPERIMENT-MIB -- *** JNX
|
|
;
|
|
|
|
mplsMldpStdMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201609260000Z" -- September 26, 2016
|
|
ORGANIZATION "Multiprotocol Label Switching (mpls)
|
|
Working Group"
|
|
CONTACT-INFO
|
|
|
|
" Kishore Tiruveedhula
|
|
Juniper Networks
|
|
Email: kishoret@juniper.net
|
|
|
|
Uwe Joorde
|
|
Deutsche Telekom
|
|
Email: Uwe.Joorde@telekom.de
|
|
|
|
Arvind Venkateswaran
|
|
Cisco Systems
|
|
EMail: arvvenka@cisco.com
|
|
|
|
Comments about this document should be emailed
|
|
directly to the MPLS working group mailing list at
|
|
mpls@lists.ietf.org"
|
|
|
|
DESCRIPTION
|
|
"Copyright (c) 2009 IETF Trust and the persons identified as
|
|
the document authors. All rights reserved.
|
|
|
|
This document is subject to BCP 78 and the IETF Trust's
|
|
Legal Provisions Relating to IETF Documents in effect on the
|
|
date of publication of this document
|
|
(http://trustee.ietf.org/license-info). Please review these
|
|
documents carefully, as they describe your rights and
|
|
restrictions with respect to this document.
|
|
|
|
The initial version of this MIB module was published in
|
|
RFC XXXX. For full legal notices see the RFC itself or see:
|
|
http://www.ietf.org/copyrights/ianamib.html
|
|
-- RFC Editor. Please replace XXXX with the RFC number for this
|
|
-- document and remove this note.
|
|
|
|
This MIB module contains managed object definitions for mLDP LSPS
|
|
defined in Label Distribution Protocol Extensions Point-to-Multipoint and
|
|
Multipoint-to-Multipoint Label Switched Paths, RFC 6388, November
|
|
2011."
|
|
|
|
REVISION "201609260000Z" -- September 26, 2016
|
|
DESCRIPTION
|
|
"Initial version issued as part of RFC XXXX."
|
|
-- RFC Editor. Please replace XXXX with the RFC number for this
|
|
-- document and remove this note.
|
|
|
|
-- ::= { mplsStdMIB YYY }
|
|
::= { jnxMldpExperiment 1 }
|
|
|
|
-- RFC Editor. Please replace YYY with the codepoint issued by IANA
|
|
-- and remove this note.
|
|
|
|
-- Top level components of this MIB module.
|
|
|
|
|
|
-- notifications
|
|
|
|
mplsMldpNotifications OBJECT IDENTIFIER ::= { mplsMldpStdMIB 0 }
|
|
-- tables, scalars
|
|
mplsMldpScalars OBJECT IDENTIFIER ::= { mplsMldpStdMIB 1 }
|
|
mplsMldpObjects OBJECT IDENTIFIER ::= { mplsMldpStdMIB 2 }
|
|
|
|
-- MPLS mLDP LSP scalars.
|
|
|
|
mplsMldpP2mpCapable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the P2MP capability of the LSR."
|
|
|
|
REFERENCE
|
|
"Section 2.1 of [RFC6388]."
|
|
|
|
::= { mplsMldpScalars 1 }
|
|
|
|
|
|
mplsMldpMp2mpCapable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides MP2MP capability of the LSR."
|
|
|
|
REFERENCE
|
|
"Section 3.1 of [RFC6388]."
|
|
|
|
::= { mplsMldpScalars 2 }
|
|
|
|
|
|
mplsMldpMbbCapable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides MBB (make before break) capability of the LSR."
|
|
|
|
REFERENCE
|
|
"Section 8.3 of [RFC6388]."
|
|
|
|
::= { mplsMldpScalars 3 }
|
|
|
|
mplsMldpMbbTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..300)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned integer value provides the time for waiting MBB Ack
|
|
from upstream node."
|
|
|
|
DEFVAL { 30 }
|
|
::= { mplsMldpScalars 4 }
|
|
|
|
|
|
mplsMldpNumFecs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of active and passive mLdp Fecs on this device."
|
|
|
|
::= { mplsMldpScalars 5 }
|
|
|
|
mplsMldpNumFecsActive OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of mLdp FECs Active on this device. The mLDP FEC is
|
|
considered active if the mplsMldpFecOperStatus is up(1)."
|
|
|
|
::= { mplsMldpScalars 6 }
|
|
|
|
mplsMldpPlrCapable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides Point of Local Repair (PLR)
|
|
capability of the LSR."
|
|
|
|
REFERENCE
|
|
"Section 5.1 of [I-D.ietf-mpls-mldp-node-protection]."
|
|
|
|
::= { mplsMldpScalars 7 }
|
|
|
|
mplsMldpMptCapable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides Merge Point (MPT) capability of the LSR."
|
|
|
|
REFERENCE
|
|
"Section 5.2 of [I-D.ietf-mpls-mldp-node-protection]."
|
|
|
|
::= { mplsMldpScalars 8 }
|
|
|
|
mplsMldpProtLsrCapable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides Protected LSR capability."
|
|
|
|
REFERENCE
|
|
"Section 5.3 of [I-D.ietf-mpls-mldp-node-protection]."
|
|
|
|
::= { mplsMldpScalars 9 }
|
|
|
|
mplsMldpNodeProtCapable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides Node Protection capability of the LSR."
|
|
|
|
REFERENCE
|
|
"Section 5.3 of [I-D.ietf-mpls-mldp-node-protection]."
|
|
|
|
::= { mplsMldpScalars 10 }
|
|
|
|
-- End of MPLS mLDP scalars.
|
|
|
|
-- MPLS mLDP tables.
|
|
|
|
--
|
|
-- The MPLS LDP Peer Capability Table
|
|
--
|
|
|
|
mplsLdpPeerCapabilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsLdpPeerCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table will have learned information relating to Mldp."
|
|
::= { mplsMldpObjects 1 }
|
|
|
|
mplsLdpPeerCapabilityEntry OBJECT-TYPE
|
|
SYNTAX MplsLdpPeerCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single Peer which is related
|
|
to a Session. This table is augmented by
|
|
the mplsLdpSessionTable."
|
|
INDEX { mplsLdpEntityLdpId,
|
|
mplsLdpEntityIndex,
|
|
mplsMldpPeerLdpId
|
|
}
|
|
::= { mplsLdpPeerCapabilityTable 1 }
|
|
|
|
MplsLdpPeerCapabilityEntry ::= SEQUENCE {
|
|
mplsMldpPeerLdpId MplsLdpIdentifier,
|
|
mplsLdpPeerCapability BITS
|
|
}
|
|
|
|
mplsMldpPeerLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LDP identifier of this LDP Peer."
|
|
|
|
::= { mplsLdpPeerCapabilityEntry 1 }
|
|
|
|
mplsLdpPeerCapability OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
none (0),
|
|
p2mp (1),
|
|
mp2mp(2),
|
|
mbb (3),
|
|
upstream-label-assignment (4),
|
|
dynamic (5),
|
|
plr (6),
|
|
mpt (7),
|
|
prot-lsr (8),
|
|
node-prot (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This will indicate the LDP capability information about peer.
|
|
The p2mp indicates peer supports P2MP Capability.
|
|
The mp2mp indicates peer supports MP2MP Capability.
|
|
The mbb indicates peer supports MBB Capability.
|
|
The upstream-label-assignment indicates peer supports Upstream label
|
|
assignment Capability.
|
|
The dynamic indicates peer supports dynamic Capability.
|
|
The plr indicates Point of Local Repair Capability.
|
|
The mpt indicates Point of Merge Point Capability.
|
|
The prot-lsr indicates Protected LSR Capability.
|
|
The node-prot indicates Node Protection LSR Capability.
|
|
"
|
|
|
|
REFERENCE
|
|
"RFC6388, Section 2.1 for P2MP Capability TLV.
|
|
and the section 3.1 for MP2MP Capability TLV.
|
|
The RFC6388 for MBB Capability TLV.
|
|
RFC5561 Section 9 for Dynamic Capability Announcement TLV.
|
|
RFC6389 Section 3 for Upstream Label Assignment Capability TLV.
|
|
Section 5 of [I-D.ietf-mpls-mldp-node-protection] describes for Point of Local Repair (plr)
|
|
capability, Merge Point (mpt) capability,
|
|
The Protected LSR (port-lsr) and Node Protection (node-prot) Capability. "
|
|
|
|
::= { mplsLdpPeerCapabilityEntry 2 }
|
|
|
|
--
|
|
-- The MPLS mLDP Session Statistics Table
|
|
--
|
|
|
|
mplsMldpSessionStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsMldpSessionStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of statistics related to mLDP on Sessions.
|
|
This table AUGMENTS the mplsLdpSessionStatsTable."
|
|
::= { mplsMldpObjects 2 }
|
|
|
|
mplsMldpSessionStatsEntry OBJECT-TYPE
|
|
SYNTAX MplsMldpSessionStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents mLDP statistical
|
|
information on a single session between an LDP
|
|
Entity and LDP Peer."
|
|
|
|
INDEX { mplsLdpEntityLdpId,
|
|
mplsLdpEntityIndex,
|
|
mplsLdpPeerLdpId
|
|
}
|
|
::= { mplsMldpSessionStatsTable 1 }
|
|
|
|
MplsMldpSessionStatsEntry ::= SEQUENCE {
|
|
mplsMldpSessionStatsNumFecsSent Counter32,
|
|
mplsMldpSessionStatsNumMbbReqSentState Counter32,
|
|
mplsMldpSessionStatsNumFecsRcvd Counter32,
|
|
mplsMldpSessionStatsNumMbbReqRcvdState Counter32,
|
|
mplsMldpSessionStatsNumMbbResetAckByTimer Counter32
|
|
}
|
|
|
|
mplsMldpSessionStatsNumFecsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts the number of mLDP FECs sent on this
|
|
session. If the FEC is withdrawn, then this number is
|
|
decremented.
|
|
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
mplsLdpSessionDiscontinuityTime."
|
|
|
|
::= { mplsMldpSessionStatsEntry 1 }
|
|
|
|
mplsMldpSessionStatsNumMbbReqSentState OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts the number of mLDP FECs sent on this
|
|
session and waiting for MBB Ack. This counter will get incremented
|
|
when MBB req sent for a label on this session and will get
|
|
decremented when the MBB Ack received."
|
|
|
|
::= { mplsMldpSessionStatsEntry 2 }
|
|
|
|
|
|
mplsMldpSessionStatsNumFecsRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts the number of mLDP FECs received on this
|
|
session. If the FEC is withdrawn from the downstream session,
|
|
then this is decremented.
|
|
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
mplsLdpSessionDiscontinuityTime."
|
|
|
|
::= { mplsMldpSessionStatsEntry 3 }
|
|
|
|
mplsMldpSessionStatsNumMbbReqRcvdState OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts the number of mLDP FECs received on this
|
|
session and waiting for sending MBB Ack. This counter will get
|
|
incremented when MBB req is received for a label on this session
|
|
and will get decremented when the MBB Ack sent."
|
|
|
|
::= { mplsMldpSessionStatsEntry 4 }
|
|
|
|
|
|
mplsMldpSessionStatsNumMbbResetAckByTimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object counts the number mLDP FECs for which the MBB Ack is
|
|
reset by MBB timer, in which the LSR is waiting for MBB ack."
|
|
|
|
::= { mplsMldpSessionStatsEntry 5 }
|
|
|
|
--
|
|
-- Mpls mLDP FEC Table
|
|
--
|
|
|
|
mplsMldpFecTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsMldpFecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the FEC
|
|
(Forwarding Equivalence Class)
|
|
Information associated with an mLDP LSP."
|
|
|
|
::= { mplsMldpObjects 3 }
|
|
|
|
|
|
mplsMldpFecEntry OBJECT-TYPE
|
|
SYNTAX MplsMldpFecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row represents a single mLDP FEC Element."
|
|
INDEX { mplsLdpEntityLdpId,
|
|
mplsLdpEntityIndex,
|
|
mplsMldpFecIndex
|
|
}
|
|
|
|
::= { mplsMldpFecTable 1 }
|
|
|
|
MplsMldpFecEntry ::= SEQUENCE {
|
|
mplsMldpFecIndex IndexInteger,
|
|
mplsMldpFecType INTEGER,
|
|
mplsMldpFecRootAddrType InetAddressType,
|
|
mplsMldpFecRootAddr InetAddress,
|
|
mplsMldpFecOpaqueType INTEGER,
|
|
mplsMldpFecOpaqueGenLspId Unsigned32,
|
|
mplsMldpFecOpaqueTransitSourceOrBidirAddrType InetAddressType,
|
|
mplsMldpFecOpaqueTransitSourceOrBidirAddr InetAddress,
|
|
mplsMldpFecOpaqueTransitGroupAddrType InetAddressType,
|
|
mplsMldpFecOpaqueTransitGroupAddr InetAddress,
|
|
mplsMldpFecAdminStatus INTEGER,
|
|
mplsMldpFecOperStatus INTEGER,
|
|
mplsMldpFecMoFrr INTEGER,
|
|
mplsMldpFecLsrState INTEGER,
|
|
mplsMldpFecUpTime TimeStamp
|
|
}
|
|
|
|
mplsMldpFecIndex OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index which uniquely identifies this entry."
|
|
|
|
::= { mplsMldpFecEntry 1 }
|
|
|
|
|
|
mplsMldpFecType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p2mp(6),
|
|
mp2mpUpstream(7),
|
|
mp2mpDownstream(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the FEC. If the value of this object
|
|
is 6, then it is P2MP Fec Type, and 7, 8 are correspond to
|
|
MP2MP upstream and downstream type."
|
|
|
|
REFERENCE
|
|
"RFC6388, Section 2.2. The P2MP FEC Element and the section 3.3
|
|
for the MP2MP Fec elements."
|
|
|
|
::= { mplsMldpFecEntry 2 }
|
|
|
|
mplsMldpFecRootAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is the type of the
|
|
Internet address. The value of this object,
|
|
decides how the value of the mplsMldpFecRootAddr object
|
|
is interpreted."
|
|
REFERENCE
|
|
"RFC6388, Section 2.2. The P2MP FEC Element and the section 3.3
|
|
for the MP2MP Fec elements."
|
|
|
|
::= { mplsMldpFecEntry 3 }
|
|
|
|
mplsMldpFecRootAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is interpreted based
|
|
on the value of the mplsMldpFecRootAddrType object.
|
|
This is ingress node address for the mLDP LSP."
|
|
|
|
REFERENCE
|
|
"RFC6388, Section 2.2. The P2MP FEC Element and the section 3.3
|
|
for the MP2MP Fec elements."
|
|
|
|
::= { mplsMldpFecEntry 4 }
|
|
|
|
|
|
mplsMldpFecOpaqueType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
genericLspId(1),
|
|
transitIpv4Source(3),
|
|
transitIpv6Source(4),
|
|
transitIpv4Bidir(5),
|
|
transitIpv6Bidir(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is opaque type of the mLDP FEC. The value of this object is
|
|
shown below.
|
|
|
|
1 - The Generic LSP Identifier
|
|
3 - Transit IPv4 Source TLV
|
|
4 - Transit IPv6 Source TLV
|
|
5 - Transit IPv4 Bidir TLV
|
|
6 - Transit IPv6 Bidir TLV.
|
|
"
|
|
::= { mplsMldpFecEntry 5 }
|
|
|
|
mplsMldpFecOpaqueGenLspId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned integer value which is to represent Generic
|
|
LSP ID. This value is only valid if the mplsMldpFecOpaqueType is
|
|
genericLspId(1), otherwise 0 must be returned."
|
|
|
|
REFERENCE
|
|
"RFC6388, Section 2.3.1."
|
|
|
|
::= { mplsMldpFecEntry 6 }
|
|
|
|
mplsMldpFecOpaqueTransitSourceOrBidirAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is the type of the
|
|
Internet address. The value of this object,
|
|
decides how the value of the mplsMldpFecOpaqueTransitSourceOrBidirAddr
|
|
object is interpreted."
|
|
REFERENCE
|
|
"RFC6826, Section 3.1."
|
|
|
|
::= { mplsMldpFecEntry 7 }
|
|
|
|
mplsMldpFecOpaqueTransitSourceOrBidirAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is interpreted based
|
|
on the value of the mplsMldpFecOpaqueTransitSourceOrBidirAddrType
|
|
object. This is source node address for the mLDP inband LSP."
|
|
|
|
REFERENCE
|
|
"RFC6826, Section 3.1."
|
|
|
|
::= { mplsMldpFecEntry 8 }
|
|
|
|
mplsMldpFecOpaqueTransitGroupAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is the type of the
|
|
Internet address. The value of this object,
|
|
decides how the value of the mplsMldpFecOpaqueTransitGroupAddr
|
|
object is interpreted."
|
|
|
|
REFERENCE
|
|
"RFC6826, Section 3.2."
|
|
|
|
::= { mplsMldpFecEntry 9 }
|
|
|
|
mplsMldpFecOpaqueTransitGroupAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is interpreted based
|
|
on the value of the mplsMldpFecOpaqueTransitGroupAddrType
|
|
object. This is group node address for the mLDP inband LSP."
|
|
|
|
REFERENCE
|
|
"RFC6826, Section 3.2."
|
|
|
|
::= { mplsMldpFecEntry 10 }
|
|
|
|
|
|
mplsMldpFecAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass data
|
|
down(2) -- out of service
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the admin status of this mLDP FEC."
|
|
|
|
DEFVAL { up }
|
|
|
|
::= { mplsMldpFecEntry 11 }
|
|
|
|
mplsMldpFecOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass data
|
|
down(2) -- out of service
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the actual operational status of this mLDP Fec."
|
|
|
|
::= { mplsMldpFecEntry 12 }
|
|
|
|
mplsMldpFecMoFrr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides whether MoFRR enabled for this mLDP FEC.
|
|
on this mLDP FEC. As mentioned in the section 3.2 of [I-D.ietf-rtgwg-mofrr],
|
|
When this is enabled, then mLDP may select two upstream sessions,
|
|
one is primary and other one is backup. The backup traffic is
|
|
discarded when the primary upstream session is UP. When the
|
|
primary upstream session goes down, the traffic from the backup
|
|
upstream session will be forwarded to downstream.
|
|
"
|
|
|
|
::= { mplsMldpFecEntry 13 }
|
|
|
|
mplsMldpFecLsrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
egress(1),
|
|
bud(2),
|
|
transit(3),
|
|
ingress(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the role of FEC either egress, bud, transit or ingress"
|
|
|
|
::= { mplsMldpFecEntry 14 }
|
|
|
|
mplsMldpFecUpTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This values shows Fec UP time. This is time since mplsMldpFecOperStatus is UP."
|
|
|
|
::= { mplsMldpFecEntry 15 }
|
|
|
|
-- MPLS mLDP LSP Branch Traffic Stats Table.
|
|
|
|
mplsMldpFecBranchStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsMldpFecBranchStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides mLDP Fec branch MPLS Traffic Stats
|
|
information."
|
|
|
|
::= { mplsMldpObjects 4 }
|
|
|
|
mplsMldpFecBranchStatsEntry OBJECT-TYPE
|
|
SYNTAX MplsMldpFecBranchStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by the LSR for each
|
|
downstream branch (out-segment) from this LSR for this mLDP
|
|
LSP. Each downstream session may represent a single out-segment.
|
|
|
|
Each entry in the table is indexed by the four identifiers
|
|
of the mLDP LSP, and the out-segment that identifies the
|
|
outgoing branch."
|
|
|
|
INDEX { mplsLdpEntityIndex,
|
|
mplsMldpFecBranchFecIndex,
|
|
mplsMldpFecBranchOutSegIndex
|
|
}
|
|
|
|
::= { mplsMldpFecBranchStatsTable 1 }
|
|
|
|
|
|
MplsMldpFecBranchStatsEntry ::= SEQUENCE {
|
|
mplsMldpFecBranchFecIndex MplsIndexType,
|
|
mplsMldpFecBranchOutSegIndex MplsIndexType,
|
|
mplsMldpFecBranchPeerLdpId MplsLdpIdentifier,
|
|
mplsMldpFecBranchStatsPackets Counter64,
|
|
mplsMldpFecBranchStatsBytes Counter64,
|
|
mplsMldpFecBranchStatsDiscontinuityTime TimeStamp
|
|
}
|
|
|
|
mplsMldpFecBranchFecIndex OBJECT-TYPE
|
|
SYNTAX MplsIndexType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index identifies the mLDP FEC entry in the
|
|
mplsMldpFecTable. This is same as mplsMldpFecIndex."
|
|
|
|
::= { mplsMldpFecBranchStatsEntry 1 }
|
|
|
|
|
|
mplsMldpFecBranchOutSegIndex OBJECT-TYPE
|
|
SYNTAX MplsIndexType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies an outgoing branch from this mLDP LSP
|
|
Its value is unique within the context of the mLDP LSP.
|
|
|
|
This contains the same value as the mplsOutSegmentIndex in the
|
|
MPLS-LSR-STD-MIBs mplsOutSegmentTable."
|
|
|
|
::= { mplsMldpFecBranchStatsEntry 2 }
|
|
|
|
mplsMldpFecBranchPeerLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies an outgoing branch peer LDP ID for this
|
|
mLDP LSP. Its value is unique within the context of the mLDP LSP.
|
|
On Egress node, this value could be 0.0.0.0:00 as there will no
|
|
downstream LDP session."
|
|
|
|
::= { mplsMldpFecBranchStatsEntry 3 }
|
|
|
|
mplsMldpFecBranchStatsPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represent the 64-bit value, which gives the number
|
|
of packets forwarded by the mLDP LSP onto this branch.
|
|
This object should be read in conjunction with
|
|
mplsMldpFecBranchStatsDiscontinuityTime."
|
|
|
|
::= { mplsMldpFecBranchStatsEntry 4 }
|
|
|
|
mplsMldpFecBranchStatsBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represent the 64-bit value, which gives the number
|
|
of bytes forwarded by the mLDP LSP onto this branch.
|
|
This object should be read in conjunction with
|
|
mplsMldpFecBranchStatsDiscontinuityTime."
|
|
|
|
::= { mplsMldpFecBranchStatsEntry 5 }
|
|
|
|
mplsMldpFecBranchStatsDiscontinuityTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion at which
|
|
any one or more of this rows Counter32 or Counter64 objects
|
|
experienced a discontinuity. If no such discontinuity has
|
|
occurred since the last re-initialization of the local
|
|
management subsystem, then this object contains a zero
|
|
value."
|
|
::= { mplsMldpFecBranchStatsEntry 6 }
|
|
|
|
-- End of mplsMldpFecBranchStatsTable
|
|
|
|
|
|
-- MPLS mLDP LSP Upstream Session Table.
|
|
|
|
mplsMldpFecUpstreamSessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsMldpFecUpstreamSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides mLDP Fec upstream Session information."
|
|
|
|
::= { mplsMldpObjects 5 }
|
|
|
|
mplsMldpFecUpstreamSessEntry OBJECT-TYPE
|
|
SYNTAX MplsMldpFecUpstreamSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by the LSR for each
|
|
upstream session (in-segment) from this LSR for this mLDP
|
|
LSP. Each upstream session may represent a single in-segment.
|
|
|
|
Each entry in the table is indexed by the four identifiers
|
|
of the mLDP LSP, and the in-segment that identifies the
|
|
incoming traffic."
|
|
INDEX { mplsLdpEntityLdpId,
|
|
mplsLdpEntityIndex,
|
|
mplsMldpFecUpstreamSessFecIndex,
|
|
mplsMldpFecUpstreamSessInSegIndex
|
|
}
|
|
|
|
::= { mplsMldpFecUpstreamSessTable 1 }
|
|
|
|
MplsMldpFecUpstreamSessEntry ::= SEQUENCE {
|
|
mplsMldpFecUpstreamSessFecIndex MplsIndexType,
|
|
mplsMldpFecUpstreamSessInSegIndex MplsIndexType,
|
|
mplsMldpFecUpstreamSessPeerLdpId MplsLdpIdentifier,
|
|
mplsMldpFecUpstreamSessPrimary INTEGER,
|
|
mplsMldpFecUpstreamSessActive INTEGER,
|
|
mplsMldpFecUpstreamSessPackets Counter64,
|
|
mplsMldpFecUpstreamSessBytes Counter64,
|
|
mplsMldpFecUpstreamSessDiscontinuityTime TimeStamp
|
|
}
|
|
|
|
mplsMldpFecUpstreamSessFecIndex OBJECT-TYPE
|
|
SYNTAX MplsIndexType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index identifies the mLDP FEC entry in the
|
|
mplsMldpFecTable."
|
|
|
|
::= { mplsMldpFecUpstreamSessEntry 1 }
|
|
|
|
|
|
mplsMldpFecUpstreamSessInSegIndex OBJECT-TYPE
|
|
SYNTAX MplsIndexType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies an upstream session from this mLDP LSP
|
|
Its value is unique within the context of the mLDP LSP.
|
|
|
|
This contains the same value as the mplsInSegmentIndex in the
|
|
MPLS-LSR-STD-MIBs mplsInSegmentTable."
|
|
|
|
::= { mplsMldpFecUpstreamSessEntry 2 }
|
|
|
|
mplsMldpFecUpstreamSessPeerLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies an upstream session peer LDP ID for this
|
|
mLDP LSP. Its value is unique within the context of the mLDP LSP."
|
|
|
|
::= { mplsMldpFecUpstreamSessEntry 3 }
|
|
|
|
mplsMldpFecUpstreamSessPrimary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
backup(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicated wether the received traffic from upstream is
|
|
primary or backup. This is valid only if the MoFRR
|
|
(mplsMldpFecMoFrr) is enabled on this FEC."
|
|
|
|
::= { mplsMldpFecUpstreamSessEntry 4 }
|
|
|
|
mplsMldpFecUpstreamSessActive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
inactive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates whether the upstream session is active, means the
|
|
LSR programmed the forwarding engine to receive the traffic from
|
|
this upstream session. This will be Inactive if the LSR is wating
|
|
for MBB Ack."
|
|
|
|
::= { mplsMldpFecUpstreamSessEntry 5 }
|
|
|
|
mplsMldpFecUpstreamSessPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represent the 64-bit value, which gives the number
|
|
of packets received by the mLDP LSP from this upstream
|
|
session. This object should be read in conjunction with
|
|
mplsMldpFecUpstreamSessDiscontinuityTime."
|
|
|
|
::= { mplsMldpFecUpstreamSessEntry 6 }
|
|
|
|
mplsMldpFecUpstreamSessBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represent the 64-bit value, which gives the number
|
|
of bytes received by the mLDP LSP from this upstream
|
|
session. This object should be read in conjunction with
|
|
mplsMldpFecUpstreamSessDiscontinuityTime."
|
|
|
|
::= { mplsMldpFecUpstreamSessEntry 7 }
|
|
|
|
mplsMldpFecUpstreamSessDiscontinuityTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion at which
|
|
any one or more of this rows Counter32 or Counter64 objects
|
|
experienced a discontinuity. If no such discontinuity has
|
|
occurred since the last re-initialization of the local
|
|
management subsystem, then this object contains a zero
|
|
value."
|
|
::= { mplsMldpFecUpstreamSessEntry 8 }
|
|
|
|
-- End of mplsMldpFecBranchStatsTable
|
|
|
|
|
|
-- MPLS mLDP Interface Traffic Stats Table.
|
|
|
|
mplsMldpInterfaceStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsMldpInterfaceStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides mLDP Traffic Stats on specified interface."
|
|
|
|
::= { mplsMldpObjects 6 }
|
|
|
|
mplsMldpInterfaceStatsEntry OBJECT-TYPE
|
|
SYNTAX MplsMldpInterfaceStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by the LSR for each
|
|
downstream branch (out-segment) from this LSR for this mLDP
|
|
LSP. Each downstream session may represent a single out-segment.
|
|
|
|
Each entry in the table is indexed by the four identifiers
|
|
of the mLDP LSP, and the out-segment that identifies the
|
|
outgoing branch."
|
|
|
|
INDEX { mplsMldpInterfaceIndex
|
|
}
|
|
|
|
::= { mplsMldpInterfaceStatsTable 1 }
|
|
|
|
MplsMldpInterfaceStatsEntry ::= SEQUENCE {
|
|
mplsMldpInterfaceIndex InterfaceIndex,
|
|
mplsMldpInterfaceStatsSentPackets Counter64,
|
|
mplsMldpInterfaceStatsSentBytes Counter64,
|
|
mplsMldpInterfaceStatsRecvPackets Counter64,
|
|
mplsMldpInterfaceStatsRecvBytes Counter64
|
|
}
|
|
|
|
mplsMldpInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index identifies the specific interface. "
|
|
|
|
::= { mplsMldpInterfaceStatsEntry 1 }
|
|
|
|
mplsMldpInterfaceStatsSentPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is 64 bit value, which gives the number of packets
|
|
forwarded by all mLDP LSPs onto this interface."
|
|
|
|
|
|
|
|
|
|
::= { mplsMldpInterfaceStatsEntry 2 }
|
|
|
|
mplsMldpInterfaceStatsSentBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is 64 bit value, which gives the number of bytes
|
|
forwarded by all mLDP LSPs onto this interface."
|
|
|
|
::= { mplsMldpInterfaceStatsEntry 3 }
|
|
|
|
|
|
mplsMldpInterfaceStatsRecvPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is 64 bit value, which gives the number of packets
|
|
received by all mLDP LSPs from this interface."
|
|
|
|
::= { mplsMldpInterfaceStatsEntry 4 }
|
|
|
|
mplsMldpInterfaceStatsRecvBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is 64 bit value, which gives the number of bytes
|
|
received by all mLDP LSPs from this interface."
|
|
|
|
::= { mplsMldpInterfaceStatsEntry 5 }
|
|
|
|
-- End of mplsMldpInterfaceStatsTable
|
|
|
|
-- Notifications.
|
|
|
|
mplsMldpFecUp NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
mplsMldpFecAdminStatus,
|
|
mplsMldpFecOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when a mplsMldpFecOperStatus
|
|
object changes from down to up."
|
|
|
|
::= { mplsMldpNotifications 1 }
|
|
|
|
mplsMldpFecDown NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
mplsMldpFecAdminStatus,
|
|
mplsMldpFecOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when a mplsMldpFecOperStatus
|
|
object changes from up to down."
|
|
|
|
::= { mplsMldpNotifications 2 }
|
|
|
|
|
|
mplsMldpMoFrrStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
mplsMldpFecUpstreamSessPrimary
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when a mplsMldpFecUpstreamSessPrimary
|
|
object changes from primary to backup and vice versa."
|
|
|
|
::= { mplsMldpNotifications 3 }
|
|
|
|
-- End of notifications.
|
|
|
|
END
|