graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/junos/JUNIPER-VLAN-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

650 lines
21 KiB
Text
Raw Permalink Blame History

--
-- Juniper Enterprise Specific MIB: Vlan
--
-- Copyright (c) 2007-2011, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
MacAddress, TruthValue, DisplayString
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
InetAddress, InetAddressType, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
Unsigned32
FROM SNMPv2-SMI
jnxExVlan
FROM JUNIPER-EX-SMI;
jnxVlanMIBObjects MODULE-IDENTITY
LAST-UPDATED "200901090000Z" -- Fri Jan 09 00:00:00 2009 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
"Juniper Technical Assistance Center
Juniper Networks, Inc.
1194 N. Mathilda Avenue
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This module contains definitions for management information for
pre-standards IEEE 802.1Q VLANs and their association with a Lan
Emulation Client (lec). Devices implementing these pre-standards
maintain port groupings and associated filters used to form a
'virtual bridge'."
REVISION
"200901090000Z" -- Fri Jan 09 00:00:00 2009 UTC
DESCRIPTION
"Marked the deprecated Objects of jnxVlanTable,
jnxVlanInterfaceTable and jnxVlanPortGroupTable
as Obsolete."
REVISION
"200901200000Z" -- Mon Jan 20 00:00:00 2009 UTC
DESCRIPTION
"Added new Object jnxExVlanTag to represent Vlan Tag information
for each Vlan."
REVISION
"201009070000Z" -- Tue Sep 7 00:00:00 2010 UTC
DESCRIPTION
"Added new Objects jnxExVlanPortTagness and jnxExVlanPortAccessMode as
part of jnxExVlanPortGroupTable."
::= { jnxExVlan 1 }
--------------------------------------------------------------------------------
-- VLAN Configuration
--------------------------------------------------------------------------------
jnxVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVlanEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table of VLAN names and characteristics."
::= { jnxVlanMIBObjects 1 }
jnxVlanEntry OBJECT-TYPE
SYNTAX JnxVlanEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table entry containing VLAN names and characteristics."
INDEX { IMPLIED jnxVlanName }
::= { jnxVlanTable 1 }
JnxVlanEntry ::=
SEQUENCE {
jnxVlanName DisplayString,
jnxVlanID Integer32,
jnxVlanType INTEGER,
jnxVlanPortGroupInstance Integer32,
jnxVlanMacListInstance Integer32
}
jnxVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Vlan name is the textual name and this is the identifier
that the user of a configuration utility will use."
::= { jnxVlanEntry 1 }
jnxVlanID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This is the locally significant ID that is used internally by this
device to reference this VLAN."
::= { jnxVlanEntry 2 }
jnxVlanType OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The valn type can be
static (1)
Dynamic(2)"
DEFVAL { 1 }
::= { jnxVlanEntry 3 }
jnxVlanPortGroupInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"jnxVlanPortGroupInstance is the index that identifies that the sub
tree in the jnxVlanPortGroupTable helps to retrieve the group of
ports in this VLAN."
::= { jnxVlanEntry 4 }
jnxVlanMacListInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"jnxVlanMacListInstance is the index , if this is a MAC-based VLAN
which identifies the sub tree to retrieve the list of MAC address to
allow into this VLAN. If this is not a MAC-based VLAN then the
value is 0"
DEFVAL { 0 }
::= { jnxVlanEntry 5 }
jnxVlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table of VLAN names and characteristics in layer 3."
::= { jnxVlanMIBObjects 2 }
jnxVlanInterfaceEntry OBJECT-TYPE
SYNTAX JnxVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table entry containing VLAN names and characteristics in layer 3."
INDEX { IMPLIED jnxVlanName }
::= { jnxVlanInterfaceTable 1 }
JnxVlanInterfaceEntry ::=
SEQUENCE {
jnxVlanInterfaceIpAddress InetAddress,
jnxVlanInterfaceProtocol InetAddressType,
jnxVlanInterfaceSubNetMask IpAddress,
jnxVlanInterfaceBroadcastAddress IpAddress,
jnxVlanInterfaceDescription DisplayString,
jnxVlanInterfaceAdminStatus TruthValue,
jnxVlanInterfaceOperStatus DisplayString,
jnxVlanSnmpIfIndex InterfaceIndex
}
jnxVlanInterfaceIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This specifies the IPAddress of this interface. "
::= { jnxVlanInterfaceEntry 1 }
jnxVlanInterfaceProtocol OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This specifies the protocol for ipv4."
::= { jnxVlanInterfaceEntry 2 }
jnxVlanInterfaceSubNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This specifies the subnet mask address of the vlan ."
::= { jnxVlanInterfaceEntry 3 }
jnxVlanInterfaceBroadcastAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This specifies the broadcast address of the vlan."
::= { jnxVlanInterfaceEntry 4 }
jnxVlanInterfaceDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"jnxvlanInterfaceDescription provides the description for the vlan."
::= { jnxVlanInterfaceEntry 5 }
jnxVlanInterfaceAdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This takes care of administration status of the vlan"
::= { jnxVlanInterfaceEntry 6 }
jnxVlanInterfaceOperStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This specifies the operational status of the vlan"
::= { jnxVlanInterfaceEntry 7 }
jnxVlanSnmpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This specifies the SNMP IF Index ."
::= { jnxVlanInterfaceEntry 8 }
-------------------------------------------------------------------------------
-- Port Group Table
--------------------------------------------------------------------------------
jnxVlanPortGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVlanPortGroupEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table of port groupings."
::= { jnxVlanMIBObjects 3 }
jnxVlanPortGroupEntry OBJECT-TYPE
SYNTAX JnxVlanPortGroupEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table entry containing a port number"
INDEX { jnxVlanPortGroupIndex, jnxVlanPort }
::= { jnxVlanPortGroupTable 1 }
JnxVlanPortGroupEntry ::=
SEQUENCE {
jnxVlanPortGroupIndex Integer32,
jnxVlanPort Integer32,
jnxVlanPortStatus INTEGER
}
jnxVlanPortGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Index used so that there can be many different
port groups"
::= { jnxVlanPortGroupEntry 1 }
jnxVlanPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The vlanPort specifies the port in the vlan.By adding a port here,
that port will now be part of any VLAN(s) that this port group is
associated with."
::= { jnxVlanPortGroupEntry 2 }
jnxVlanPortStatus OBJECT-TYPE
SYNTAX INTEGER {
autoActive (1),
allowed (2),
allowedActive (3),
allowedNotAvail (4),
notAssociated (5)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The status of this port relative to the VLAN that points
at this port group.[1.autoactive , 2.allowed, 3.allowedActive
4.allowedNotAvail, 5.notAssociated]
autoActive : Means that the port is part of this VLAN
because the switch automatically added it.
allowed : Means that the port has been configured so that
if all other criteria (if any) are met, this port
is allowed to be in this VLAN.
allowedActive : Means the same as allowed plus the fact
that there is a device attached to this port and
participating in the VLAN.
allowedNotAvail: This value is only needed for devices
that don't allow a port to be in more than one
VLAN at a time. This value means that this port
also exists in some other VLAN(s) and is active
in another VLAN. Therefore this port is not
available to be used in this VLAN.
notAssociated : Means that the Port Group is not currently
associated with any VLAN."
DEFVAL { allowed }
::= { jnxVlanPortGroupEntry 3 }
--------------------------------------------------------------------------------
-- MAC List Table
--------------------------------------------------------------------------------
jnxVlanMacListTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVlanMacListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"jnxVlanMacListTable is the table of MAC Lists. "
::= { jnxVlanMIBObjects 4 }
jnxVlanMacListEntry OBJECT-TYPE
SYNTAX JnxVlanMacListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry containing MAC Addresses"
INDEX { jnxVlanMacListIndex }
::= { jnxVlanMacListTable 1 }
JnxVlanMacListEntry ::=
SEQUENCE {
jnxVlanMacListIndex Integer32,
jnxVlanMacAddress MacAddress
}
jnxVlanMacListIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"jnxVlanMacListIndex can be used beacuse there can be many different
MAC Lists"
::= { jnxVlanMacListEntry 1 }
jnxVlanMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"jnxVlanMacAddress is the MAC Address that belongs to this group."
::= { jnxVlanMacListEntry 2 }
--------------------------------------------------------------------------------
-- Ex VLAN Configuration
--------------------------------------------------------------------------------
jnxExVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxExVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of VLAN names and characteristics."
::= { jnxVlanMIBObjects 5 }
jnxExVlanEntry OBJECT-TYPE
SYNTAX JnxExVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry containing VLAN names and characteristics."
INDEX { jnxExVlanID }
::= { jnxExVlanTable 1 }
JnxExVlanEntry ::=
SEQUENCE {
jnxExVlanID Integer32,
jnxExVlanName DisplayString,
jnxExVlanType INTEGER,
jnxExVlanPortGroupInstance Integer32,
jnxExVlanTag Unsigned32
}
jnxExVlanID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the locally significant ID that is used internally by this
device to reference this VLAN."
::= { jnxExVlanEntry 1 }
jnxExVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan name is the textual name."
::= { jnxExVlanEntry 2 }
jnxExVlanType OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan type can be
static (1)
Dynamic(2)"
DEFVAL { 1 }
::= { jnxExVlanEntry 3 }
jnxExVlanPortGroupInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"jnxExVlanPortGroupInstance is the index that identifies that the sub
tree in the jnxVlanPortGroupTable helps to retrieve the group of
ports in this VLAN."
::= { jnxExVlanEntry 4 }
jnxExVlanTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"jnxExVlanTag gives the Vlan Tag details for each Vlan."
::= { jnxExVlanEntry 5 }
--------------------------------------------------------------------------------
-- Ex VLAN Interface Table
--------------------------------------------------------------------------------
jnxExVlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxExVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of VLAN names and characteristics in layer 3."
::= { jnxVlanMIBObjects 6 }
jnxExVlanInterfaceEntry OBJECT-TYPE
SYNTAX JnxExVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry containing VLAN names and characteristics in layer 3."
INDEX { jnxExVlanID }
::= { jnxExVlanInterfaceTable 1 }
JnxExVlanInterfaceEntry ::=
SEQUENCE {
jnxExVlanInterfaceProtocol InetAddressType,
jnxExVlanInterfaceIpAddress InetAddress,
jnxExVlanInterfacePrefixLength InetAddressPrefixLength,
jnxExVlanInterfaceBroadcastAddress InetAddress,
jnxExVlanInterfaceDescription DisplayString,
jnxExVlanInterfaceAdminStatus INTEGER,
jnxExVlanInterfaceOperStatus INTEGER,
jnxExVlanSnmpIfIndex InterfaceIndex
}
jnxExVlanInterfaceProtocol OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the protocol for ipv4."
::= { jnxExVlanInterfaceEntry 1 }
jnxExVlanInterfaceIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the IPAddress of this interface. "
::= { jnxExVlanInterfaceEntry 2 }
jnxExVlanInterfacePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the length of subnet mask address of the vlan ."
::= { jnxExVlanInterfaceEntry 3 }
jnxExVlanInterfaceBroadcastAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the broadcast address of the vlan."
::= { jnxExVlanInterfaceEntry 4 }
jnxExVlanInterfaceDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"jnxExvlanInterfaceDescription provides the description for the vlan."
::= { jnxExVlanInterfaceEntry 5 }
jnxExVlanInterfaceAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This takes care of administration status of the vlan"
::= { jnxExVlanInterfaceEntry 6 }
jnxExVlanInterfaceOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the operational status of the vlan"
::= { jnxExVlanInterfaceEntry 7 }
jnxExVlanSnmpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the SNMP IF Index ."
::= { jnxExVlanInterfaceEntry 8 }
-------------------------------------------------------------------------------
-- Ex Port Group Table
--------------------------------------------------------------------------------
jnxExVlanPortGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxExVlanPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of port groupings."
::= { jnxVlanMIBObjects 7 }
jnxExVlanPortGroupEntry OBJECT-TYPE
SYNTAX JnxExVlanPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry containing a port number"
INDEX { jnxExVlanPortGroupIndex, jnxExVlanPort }
::= { jnxExVlanPortGroupTable 1 }
JnxExVlanPortGroupEntry ::=
SEQUENCE {
jnxExVlanPortGroupIndex Integer32,
jnxExVlanPort Integer32,
jnxExVlanPortStatus INTEGER,
jnxExVlanPortTagness INTEGER,
jnxExVlanPortAccessMode INTEGER
}
jnxExVlanPortGroupIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index used so that there can be many different
port groups"
::= { jnxExVlanPortGroupEntry 1 }
jnxExVlanPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlanPort specifies the port in the vlan.By adding a port here,
that port will now be part of any VLAN(s) that this port group is
associated with."
::= { jnxExVlanPortGroupEntry 2 }
jnxExVlanPortStatus OBJECT-TYPE
SYNTAX INTEGER {
autoActive (1),
allowed (2),
allowedActive (3),
allowedNotAvail (4),
notAssociated (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this port relative to the VLAN that points
at this port group.[1.autoactive , 2.allowed, 3.allowedActive
4.allowedNotAvail, 5.notAssociated]
autoActive : Means that the port is part of this VLAN
because the switch automatically added it.
allowed : Means that the port has been configured so that
if all other criteria (if any) are met, this port
is allowed to be in this VLAN.
allowedActive : Means the same as allowed plus the fact
that there is a device attached to this port and
participating in the VLAN.
allowedNotAvail: This value is only needed for devices
that don't allow a port to be in more than one
VLAN at a time. This value means that this port
also exists in some other VLAN(s) and is active
in another VLAN. Therefore this port is not
available to be used in this VLAN.
notAssociated : Means that the Port Group is not currently
associated with any VLAN."
DEFVAL { allowed }
::= { jnxExVlanPortGroupEntry 3 }
jnxExVlanPortTagness OBJECT-TYPE
SYNTAX INTEGER {
tagged (1),
untagged (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VlanPortTaqness gives whether the Port is tagged or untagged."
::= { jnxExVlanPortGroupEntry 4 }
jnxExVlanPortAccessMode OBJECT-TYPE
SYNTAX INTEGER {
access (1),
trunk (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VlanPortAccessMode gives whether the Port is Access or Trunk."
::= { jnxExVlanPortGroupEntry 5 }
END
Reference in a new issue View git blame Copy permalink