Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1496 lines
58 KiB
Text
1496 lines
58 KiB
Text
--
|
|
-- Juniper Enterprise Specific MIB: Ping MIB
|
|
--
|
|
-- Copyright (c) 2001-2021, Juniper Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
--
|
|
|
|
JUNIPER-PING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI -- RFC2578
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB -- RFC2863
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC2571
|
|
DisplayString, DateAndTime, TruthValue
|
|
FROM SNMPv2-TC
|
|
pingResultsEntry, pingProbeHistoryEntry, pingCtlTargetAddressType,
|
|
pingCtlTargetAddress, pingResultsOperStatus, pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress, pingResultsMinRtt, pingResultsMaxRtt,
|
|
pingResultsAverageRtt, pingResultsProbeResponses, pingResultsSentProbes,
|
|
pingResultsRttSumOfSquares, pingResultsLastGoodProbe,
|
|
OperationResponseStatus
|
|
FROM DISMAN-PING-MIB
|
|
InetPortNumber
|
|
FROM INET-ADDRESS-MIB
|
|
jnxMibs, jnxPingNotifications
|
|
FROM JUNIPER-SMI;
|
|
|
|
jnxPingMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200911180000Z" -- November 18 00:00:00 2009 UTC
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Technical Assistance Center
|
|
Juniper Networks, Inc.
|
|
1133 Innovation Way
|
|
Sunnyvale, CA 94089
|
|
E-mail: support@juniper.net"
|
|
|
|
DESCRIPTION
|
|
"This is Juniper Networks' implementation of enterprise specific
|
|
portions of pingMib. Any data stored in this MIB has directly
|
|
related entries in mib-2, pingMIB."
|
|
|
|
-- revision history
|
|
REVISION "202107190000Z" -- July 19 00:00:00 2021 UTC
|
|
DESCRIPTION
|
|
"Updated RTT, Jitter Traps with results,
|
|
Removed ununsed jnxPingMaxRttThreshold and stale entries."
|
|
REVISION "201109200000Z" -- September 20 00:00:00 2011 UTC
|
|
DESCRIPTION
|
|
"Updated the jnxPingCtlTargetPort description."
|
|
REVISION "200911180000Z" -- November 18 00:00:00 2009 UTC
|
|
DESCRIPTION
|
|
"Added jnxPingCtlEXseriesHWTimeStamp to jnxPingCtlTable."
|
|
REVISION "200904200000Z" -- April 20 00:00:00 2009 UTC
|
|
DESCRIPTION
|
|
"Added jnxPingCtlTargetPort to jnxPingCtlTable."
|
|
REVISION "200505010000Z" -- May 1 00:00:00 2005 UTC
|
|
DESCRIPTION
|
|
"Added jnxPingCtlTargetPort to jnxPingCtlTable."
|
|
REVISION "200404150000Z" -- April 15 00:00:00 2004 UTC
|
|
DESCRIPTION
|
|
"Added traps plus additional results & history data."
|
|
::= { jnxMibs 7 }
|
|
|
|
|
|
jnxPingObjects OBJECT IDENTIFIER ::= { jnxPingMIB 1 }
|
|
|
|
-- The registration node for ping implementation types
|
|
|
|
jnxPingImplementationTypeDomains OBJECT IDENTIFIER ::= { jnxPingMIB 2 }
|
|
|
|
jnxPingIcmpTimeStamp OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that an implementation is using the Internet
|
|
Control Message Protocol (ICMP) 'TimeStamp' facility.
|
|
This probe-type provides egress and ingress delay measurements."
|
|
::= { jnxPingImplementationTypeDomains 1 }
|
|
|
|
jnxPingHttpGet OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that an implementation is using an HTTP GET query to
|
|
calculate a round trip time."
|
|
::= { jnxPingImplementationTypeDomains 2 }
|
|
|
|
jnxPingHttpGetMetadata OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that an implementation is using an HTTP GET Metadata query to
|
|
calculate a round trip time."
|
|
::= { jnxPingImplementationTypeDomains 3 }
|
|
|
|
jnxPingDnsQuery OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that an implementation is using a DNS query to
|
|
calculate a round trip time."
|
|
::= { jnxPingImplementationTypeDomains 4 }
|
|
|
|
jnxPingNtpQuery OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that an implementation is using an NTP query to
|
|
calculate a round trip time."
|
|
::= { jnxPingImplementationTypeDomains 5 }
|
|
|
|
jnxPingUdpTimestamp OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that an implementation is using a UDP timestamp query to
|
|
calculate a round trip time. This probe-type provides egress and
|
|
ingress delay measurements"
|
|
::= { jnxPingImplementationTypeDomains 6 }
|
|
|
|
|
|
--
|
|
-- pingCtlTable extensions
|
|
--
|
|
|
|
jnxPingCtlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPingCtlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the jnxPing Control Table for providing enterprise specific
|
|
options to the corresponding pingCtlTable entry."
|
|
::= { jnxPingObjects 2 }
|
|
|
|
jnxPingCtlEntry OBJECT-TYPE
|
|
SYNTAX JnxPingCtlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the jnxPingCtlTable. This essentially
|
|
augments the pingCtlTable with additional objects."
|
|
INDEX {
|
|
jnxPingCtlOwnerIndex,
|
|
jnxPingCtlTestName
|
|
}
|
|
::= { jnxPingCtlTable 1 }
|
|
|
|
JnxPingCtlEntry ::=
|
|
SEQUENCE {
|
|
jnxPingCtlOwnerIndex SnmpAdminString,
|
|
jnxPingCtlTestName SnmpAdminString,
|
|
jnxPingCtlIfName DisplayString,
|
|
jnxPingCtlRoutingIfIndex InterfaceIndexOrZero,
|
|
jnxPingCtlRoutingIfName DisplayString,
|
|
jnxPingCtlRoutingInstanceName DisplayString,
|
|
jnxPingCtlRttThreshold Unsigned32,
|
|
jnxPingCtlRttStdDevThreshold Unsigned32,
|
|
jnxPingCtlRttJitterThreshold Unsigned32,
|
|
jnxPingCtlEgressTimeThreshold Unsigned32,
|
|
jnxPingCtlEgressStdDevThreshold Unsigned32,
|
|
jnxPingCtlEgressJitterThreshold Unsigned32,
|
|
jnxPingCtlIngressTimeThreshold Unsigned32,
|
|
jnxPingCtlIngressStddevThreshold Unsigned32,
|
|
jnxPingCtlIngressJitterThreshold Unsigned32,
|
|
jnxPingCtlTrapGeneration BITS,
|
|
jnxPingCtlTargetPort InetPortNumber,
|
|
jnxPingCtlJseriesHWTimeStamp TruthValue,
|
|
jnxPingCtlOneWayHWTimeStamp TruthValue,
|
|
jnxPingCtlMovAvgSize Unsigned32,
|
|
jnxPingCtlMXseriesHWTimeStamp TruthValue,
|
|
jnxPingCtlEXseriesHWTimeStamp TruthValue
|
|
}
|
|
|
|
jnxPingCtlOwnerIndex OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To facilitate the provisioning of access control by a
|
|
security administrator using the View-Based Access
|
|
Control Model (RFC 2575, VACM) for tables in which
|
|
multiple users may need to independently create or
|
|
modify entries, the initial index is used as an 'owner
|
|
index'. Such an initial index has a syntax of
|
|
SnmpAdminString, and can thus be trivially mapped to a
|
|
securityName or groupName as defined in VACM, in
|
|
accordance with a security policy.
|
|
|
|
When used in conjunction with such a security policy all
|
|
entries in the table belonging to a particular user (or
|
|
group) will have the same value for this initial index.
|
|
For a given user's entries in a particular table, the
|
|
object identifiers for the information in these entries
|
|
will have the same subidentifiers (except for the 'column'
|
|
subidentifier) up to the end of the encoded owner index.
|
|
To configure VACM to permit access to this portion of the
|
|
table, one would create vacmViewTreeFamilyTable entries
|
|
with the value of vacmViewTreeFamilySubtree including
|
|
the owner index portion, and vacmViewTreeFamilyMask
|
|
'wildcarding' the column subidentifier. More elaborate
|
|
configurations are possible."
|
|
::= { jnxPingCtlEntry 1 }
|
|
|
|
jnxPingCtlTestName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the ping test. This is locally unique, within
|
|
the scope of an pingCtlOwnerIndex."
|
|
::= { jnxPingCtlEntry 2 }
|
|
|
|
jnxPingCtlIfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to an interface name prior to starting a remote
|
|
ping operation directs the ping probes to be transmitted over the
|
|
specified interface. To specify the interface index instead, see
|
|
pingCtlIfIndex. The interface name must be specified under interfaces
|
|
statement of the JUNOS configuration. A zero length string value for
|
|
this object means that this option is not enabled. The following
|
|
values may be set simultaneously, however, only one value is used.
|
|
The precedence order is a follows:
|
|
pingCtlIfIndex (see pingCtlTable in pingMIB)
|
|
jnxPingCtlIfName
|
|
jnxPingCtlRoutingIfIndex (deprecated)
|
|
jnxPingCtlRoutingIfName (deprecated)
|
|
jnxPingCtlRoutingInstanceName"
|
|
DEFVAL { ''H }
|
|
::= { jnxPingCtlEntry 3 }
|
|
|
|
jnxPingCtlRoutingIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Use this option to specify the routing instance used when directing
|
|
outgoing ping packets. The interface ifIndex specified should be in
|
|
the desired routing instance table. The interface specified will not
|
|
necessarily be the interface packets are transmitted on. By default,
|
|
the source address of the packets will be set to the address of the
|
|
interface chosen. pingCtlSourceAddress should be used to override
|
|
the choice for source address if necessary. A value of zero for this
|
|
object means that this option is not enabled.
|
|
NOTE: deprecated by jnxPingCtlRoutingInstanceName"
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 4 }
|
|
|
|
jnxPingCtlRoutingIfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Use this option to specify the routing instance used when directing
|
|
outgoing ping packets. The interface name specified should be in
|
|
the desired routing instance table. The interface specified will not
|
|
necessarily be the interface packets are transmitted on. By default,
|
|
the source address of the packets will be set to the address of the
|
|
interface chosen. pingCtlSourceAddress should be used to override
|
|
the choice for source address if necessary.
|
|
NOTE: deprecated by jnxPingCtlRoutingInstanceName"
|
|
DEFVAL { ''H }
|
|
::= { jnxPingCtlEntry 5 }
|
|
|
|
jnxPingCtlRoutingInstanceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use this option to specify the name of the routing instance used when
|
|
directing outgoing ping packets. The instance name specified must be
|
|
configured under routing-instances of the JUNOS configuration."
|
|
DEFVAL { ''H }
|
|
::= { jnxPingCtlEntry 6 }
|
|
|
|
jnxPingCtlRttThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..6000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum round trip time allowed. If this threshold is crossed
|
|
by any probe, a jnxPingRttThresholdExceeded trap will be sent."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 7 }
|
|
|
|
jnxPingCtlRttStdDevThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..6000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum round trip time standard deviation allowed over the
|
|
course of any test. If the calculated standard deviation of the
|
|
round trip time at the end of any test exceeds this threshold,
|
|
a jnxPingRttStdDevThresholdExceeded trap will be sent."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 8 }
|
|
|
|
jnxPingCtlRttJitterThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..6000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum allowed jitter in the round trip time over the course
|
|
of any test. Jitter is defined as the difference between the
|
|
maximum and minimum round trip times measured over the course of
|
|
a single test (jnxPingResultsMaxRttUs minus jnxPingResultsMinRttUs).
|
|
If the measured jitter exceeds this threshold, a
|
|
jnxPingRttJitterThresholdExceeded trap will be sent."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 9 }
|
|
|
|
jnxPingCtlEgressTimeThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum egress trip time allowed. If this threshold is crossed by
|
|
any probe, a jnxPingEgressThresholdExceeded trap will be sent.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements. Currently jnxPingIcmpTimeStamp is the only
|
|
supported probe type with this property."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 10 }
|
|
|
|
jnxPingCtlEgressStdDevThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum egress trip time standard deviation allowed over the
|
|
course of any test. If the calculated standard deviation of the
|
|
egress trip time at the end of any test exceeds this threshold,
|
|
a jnxPingEgressStdDevThresholdExceeded trap will be sent.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements. Currently jnxPingIcmpTimeStamp is the only
|
|
supported probe type with this property."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 11 }
|
|
|
|
jnxPingCtlEgressJitterThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum allowed jitter in the egress trip time over the course
|
|
of any test. Jitter is defined as the difference between the
|
|
maximum and minimum egress trip times measured over the course of
|
|
a single test (jnxPingResultsMaxSrcDstt minus jnxPingResultsMinSrcDstt).
|
|
If the measured jitter exceeds this threshold, a
|
|
jnxPingEgressJitterThresholdExceeded trap will be sent.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements. Currently jnxPingIcmpTimeStamp is the only
|
|
supported probe type with this property."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 12 }
|
|
|
|
jnxPingCtlIngressTimeThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum ingress trip time allowed. If this threshold is crossed by
|
|
any probe, a jnxPingIngressThresholdExceeded trap will be sent.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements. Currently jnxPingIcmpTimeStamp is the only
|
|
supported probe type with this property."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 13 }
|
|
|
|
jnxPingCtlIngressStddevThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum ingress trip time standard deviation allowed over the
|
|
course of any test. If the calculated standard deviation of the
|
|
ingress trip time at the end of any test exceeds this threshold,
|
|
a jnxPingIngressStddevThresholdExceeded trap will be sent.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements. Currently jnxPingIcmpTimeStamp is the only
|
|
supported probe type with this property."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 14 }
|
|
|
|
jnxPingCtlIngressJitterThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60000000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum allowed jitter in the ingress trip time over the course
|
|
of any test. Jitter is defined as the difference between the
|
|
maximum and minimum ingress trip times measured over the course of
|
|
a single test (jnxPingResultsMaxDstSrct minus jnxPingResultsMinDstSrct).
|
|
If the measured jitter exceeds this threshold, a
|
|
jnxPingIngressJitterThresholdExceeded trap will be sent.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements. Currently jnxPingIcmpTimeStamp is the only
|
|
supported probe type with this property."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 15 }
|
|
|
|
jnxPingCtlTrapGeneration OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
rttThreshold(0),
|
|
rttStdDevThreshold(1),
|
|
rttJitterThreshold(2),
|
|
egressThreshold(3),
|
|
egressStdDevThreshold(4),
|
|
egressJitterThreshold(5),
|
|
ingressThreshold(6),
|
|
ingressStdDevThreshold(7),
|
|
ingressJitterThreshold(8),
|
|
maxrttThreshold(9)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object determines when and if
|
|
to generate a notification for this entry:
|
|
|
|
rttThreshold(0) - Generate a jnxPingRttThresholdExceeded
|
|
notification when the configured rtt threshold
|
|
is exceeded.
|
|
rttStdDevThreshold(1) - Generate a jnxPingRttStdDevThresholdExceeded
|
|
notification when the configured rtt standard deviation
|
|
threshold is exceeded.
|
|
rttJitterThreshold(2) - Generate a jnxPingRttJitterThresholdExceeded
|
|
notification when the configured rtt jitter threshold
|
|
is exceeded.
|
|
egressThreshold(3) - Generate a jnxPingEgressThresholdExceeded
|
|
notification when the configured egress threshold is exceeded.
|
|
This applies only if the probe type supports one way measurments.
|
|
egressStdDevThreshold(4) - Generate a
|
|
jnxPingEgressStdDevThresholdExceeded notification when the
|
|
configured egress standard deviation threshold is exceeded.
|
|
This applies only if the probe type supports one way measurments.
|
|
egressJitterThreshold(5) - Generate a
|
|
jnxPingEgressJitterThresholdExceeded notification when the
|
|
configured egress jitter threshold is exceeded.
|
|
This applies only if the probe type supports one way measurments.
|
|
ingressThreshold(6) - Generate a jnxPingIngressThresholdExceeded
|
|
notification when the configured ingress threshold is exceeded.
|
|
This applies only if the probe type supports one way measurments.
|
|
ingressStdDevThreshold(7) - Generate a
|
|
jnxPingIngressStdDevThresholdExceeded notification when the
|
|
configured ingress standard deviation threshold is exceeded.
|
|
This applies only if the probe type supports one way measurments.
|
|
ingressJitterThreshold(8) - Generate a
|
|
jnxPingIngressJitterThresholdExceeded notification when the
|
|
configured ingress jitter threshold is exceeded.
|
|
This applies only if the probe type supports one way measurments.
|
|
The value of this object defaults to zero, indicating
|
|
that none of the above options have been selected.
|
|
maxrttThreshold(9) - Generate a jnxPingMaxRttThresholdExceeded
|
|
notification at the end of test session when rtt of any of the probe
|
|
exceeds the configured rtt threshold."
|
|
::= { jnxPingCtlEntry 16 }
|
|
|
|
jnxPingCtlTargetPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber (7 | 49152..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The target UDP/TCP port used by the probe.
|
|
When ICMP ping is used, jnxPingCtlTargetPort value will be shown as 0."
|
|
::= { jnxPingCtlEntry 17 }
|
|
|
|
jnxPingCtlJseriesHWTimeStamp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use to enable the RPM Hardware Timestamp feature on J-series routers.
|
|
For M/T series routers, use the jnxPingCtlIfName and
|
|
pingCtlByPassRouteTable objects to redirect probes to the AS Pic.
|
|
For those routers, this object must have the value: false."
|
|
DEFVAL { false }
|
|
::= { jnxPingCtlEntry 18 }
|
|
|
|
jnxPingCtlOneWayHWTimeStamp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use this object to enable Hardware Timestamp-based one-way
|
|
measurements. If this object is not enabled (ie, set to true),
|
|
no Hardware Timestamp based one way measurements or calculations
|
|
will be performed for this control entry. This object applies to
|
|
all Juniper routers. Note, due to clock synchronization artifacts,
|
|
many one-way jitter measurements & calculations may include signifacant
|
|
variations, in some cases orders of magnitude greater than the round
|
|
trip times."
|
|
DEFVAL { false }
|
|
::= { jnxPingCtlEntry 19 }
|
|
|
|
jnxPingCtlMovAvgSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Juniper RPM feature maintains a set of the most recent probe
|
|
measurements & provides the same calculations over that collection
|
|
as provided over a test (ie, average, standard deviation, etc). This
|
|
data is available via the jnx-rpm mib or via the CLI/XML. The
|
|
number of samples maintained in this moving collection is specified
|
|
by this object. This value must be less than the number of samples
|
|
maintained in the history table (ie, pingCtlMaxRows)."
|
|
DEFVAL { 0 }
|
|
::= { jnxPingCtlEntry 20 }
|
|
|
|
jnxPingCtlMXseriesHWTimeStamp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use to enable the RPM Hardware Timestamp feature on MX-series routers.
|
|
For M/T series routers, use the jnxPingCtlIfName and
|
|
pingCtlByPassRouteTable objects to redirect probes to the AS PIC.
|
|
For those routers, this object must have the value: false."
|
|
DEFVAL { false }
|
|
::= { jnxPingCtlEntry 21 }
|
|
|
|
jnxPingCtlEXseriesHWTimeStamp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use to enable the RPM Hardware Timestamp feature on EX-series switches.
|
|
For thoses, this object must have the value: false."
|
|
DEFVAL { false }
|
|
::= { jnxPingCtlEntry 22 }
|
|
|
|
--
|
|
-- Ping Results Table extensions
|
|
--
|
|
|
|
jnxPingResultsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPingResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Augments the pingResultsTable with additional data."
|
|
::= { jnxPingObjects 3 }
|
|
|
|
jnxPingResultsEntry OBJECT-TYPE
|
|
SYNTAX JnxPingResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry provides additional ping test results."
|
|
AUGMENTS { pingResultsEntry }
|
|
::= { jnxPingResultsTable 1 }
|
|
|
|
JnxPingResultsEntry ::=
|
|
SEQUENCE {
|
|
jnxPingResultsRttUs Unsigned32,
|
|
jnxPingResultsSumRttUs Unsigned32,
|
|
jnxPingResultsMinRttUs Unsigned32,
|
|
jnxPingResultsMaxRttUs Unsigned32,
|
|
jnxPingResultsAvgRttUs Unsigned32,
|
|
jnxPingResultsStdDevRttUs Unsigned32,
|
|
jnxPingResultsEgressUs Unsigned32,
|
|
jnxPingResultsMinEgressUs Unsigned32,
|
|
jnxPingResultsMaxEgressUs Unsigned32,
|
|
jnxPingResultsAvgEgressUs Unsigned32,
|
|
jnxPingResultsStddevEgressUs Unsigned32,
|
|
jnxPingResultsIngressUs Unsigned32,
|
|
jnxPingResultsMinIngressUs Unsigned32,
|
|
jnxPingResultsMaxIngressUs Unsigned32,
|
|
jnxPingResultsAvgIngressUs Unsigned32,
|
|
jnxPingResultsStddevIngressUs Unsigned32,
|
|
jnxPingResultsJitterRttUs Unsigned32,
|
|
jnxPingResultsJitterEgressUs Unsigned32,
|
|
jnxPingResultsJitterIngressUs Unsigned32,
|
|
jnxPingResultsStatus OperationResponseStatus,
|
|
jnxPingResultsTime DateAndTime,
|
|
jnxPingResultsOwnerIndex SnmpAdminString,
|
|
jnxPingResultsTestName SnmpAdminString
|
|
}
|
|
|
|
jnxPingResultsRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The round trip delays measured for the most recent successful probe
|
|
during this test. Measured in microseconds."
|
|
::= { jnxPingResultsEntry 1 }
|
|
|
|
jnxPingResultsSumRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the round trip delays measured for all the probes
|
|
during this test. Measured in microseconds."
|
|
::= { jnxPingResultsEntry 2 }
|
|
|
|
jnxPingResultsMinRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of the round trip delays measured for all the probes
|
|
during this test. Measured in microseconds."
|
|
::= { jnxPingResultsEntry 3 }
|
|
|
|
jnxPingResultsMaxRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of the round trip delays measured for all the probes
|
|
during this test. Measured in microseconds."
|
|
::= { jnxPingResultsEntry 4 }
|
|
|
|
jnxPingResultsAvgRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of the round trip delays measured for all the probes
|
|
during this test. Measured in microseconds."
|
|
::= { jnxPingResultsEntry 5 }
|
|
|
|
jnxPingResultsStdDevRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the round trip delays measured
|
|
during this test. Measured in microseconds."
|
|
::= { jnxPingResultsEntry 6 }
|
|
|
|
jnxPingResultsEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The egress trip delays measured for the most recent successful probe
|
|
during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 7 }
|
|
|
|
jnxPingResultsMinEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of the egress trip delays measured over all
|
|
probes during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 8 }
|
|
|
|
jnxPingResultsMaxEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of the egress trip delays measured over all
|
|
probes during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 9 }
|
|
|
|
jnxPingResultsAvgEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of the egress trip delays measured over all
|
|
probes during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 10 }
|
|
|
|
jnxPingResultsStddevEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the egress trip delays measured over all
|
|
probes during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 11 }
|
|
|
|
jnxPingResultsIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress trip delays measured for the most recent successful probe
|
|
during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 12 }
|
|
|
|
jnxPingResultsMinIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of the ingress trip delays measured for over all
|
|
probes during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 13 }
|
|
|
|
jnxPingResultsMaxIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of the ingress trip delays measured over all
|
|
probes during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 14 }
|
|
|
|
jnxPingResultsAvgIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of the ingress trip delays measured over all
|
|
probes during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 15 }
|
|
|
|
jnxPingResultsStddevIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the ingress trip delays measured over all
|
|
probes during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 16 }
|
|
|
|
jnxPingResultsJitterRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The jitter of the round trip delays measured for all the probes
|
|
during this test. Measured in microseconds."
|
|
::= { jnxPingResultsEntry 17 }
|
|
|
|
jnxPingResultsJitterEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The jitter of the egress trip delays measured for all the probes
|
|
during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 18 }
|
|
|
|
jnxPingResultsJitterIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The jitter of the ingress trip delays measured for all the probes
|
|
during this test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingResultsEntry 19 }
|
|
|
|
jnxPingResultsStatus OBJECT-TYPE
|
|
SYNTAX OperationResponseStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the most recent probe."
|
|
::= { jnxPingResultsEntry 20 }
|
|
|
|
jnxPingResultsTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timestamp for when the most recent probe result was determined."
|
|
::= { jnxPingResultsEntry 21 }
|
|
|
|
jnxPingResultsOwnerIndex OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object has the same value as pingCtlOwnerIndex and is provided
|
|
for those applications that are unable to parse the value of
|
|
pingCtlOwnerIndex from the instance portion of the OIDs belonging to
|
|
this table."
|
|
::= { jnxPingResultsEntry 22 }
|
|
|
|
jnxPingResultsTestName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object has the same value as pingCtlTestName and is provided
|
|
for those applications that are unable to parse the value of
|
|
pingCtlTestName from the instance portion of the OIDs belonging to
|
|
this table."
|
|
::= { jnxPingResultsEntry 23 }
|
|
|
|
|
|
|
|
|
|
--
|
|
-- Ping History Table extensions
|
|
--
|
|
|
|
jnxPingProbeHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPingProbeHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Augments the pingHistoryTable with additional data."
|
|
::= { jnxPingObjects 4 }
|
|
|
|
jnxPingProbeHistoryEntry OBJECT-TYPE
|
|
SYNTAX JnxPingProbeHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry provides additional ping history data."
|
|
AUGMENTS { pingProbeHistoryEntry }
|
|
::= { jnxPingProbeHistoryTable 1 }
|
|
|
|
JnxPingProbeHistoryEntry ::=
|
|
SEQUENCE {
|
|
jnxPingProbeHistoryResponseUs Unsigned32,
|
|
jnxPingProbeHistoryJitterUs Unsigned32,
|
|
jnxPingProbeHistoryResponseEgressUs Unsigned32,
|
|
jnxPingProbeHistoryResponseIngressUs Unsigned32,
|
|
jnxPingProbeHistoryEgressJitterUs Unsigned32,
|
|
jnxPingProbeHistoryIngressJitterUs Unsigned32
|
|
}
|
|
|
|
jnxPingProbeHistoryResponseUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time measured in microseconds from when
|
|
a probe was sent to when its response was received or
|
|
when it timed out. The value of this object is reported
|
|
as 0 when it is not possible to transmit a probe."
|
|
::= { jnxPingProbeHistoryEntry 1 }
|
|
|
|
jnxPingProbeHistoryJitterUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time difference measured in microseconds between the maximum
|
|
and minimum round trip times. Each history entry provides a running
|
|
calculation of the jitter (calculated over the current test) at the
|
|
time a probe was completed."
|
|
|
|
::= { jnxPingProbeHistoryEntry 2 }
|
|
|
|
jnxPingProbeHistoryResponseEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time measured in microseconds from when
|
|
a probe was sent to when it was received by destination.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements.
|
|
For all other probe types, the value is irrelevant and will return 0."
|
|
::= { jnxPingProbeHistoryEntry 3 }
|
|
|
|
jnxPingProbeHistoryResponseIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time measured in microseconds from when
|
|
a probe was sent from the destination to when it was received.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements.
|
|
For all other probe types, the value is irrelevant and will return 0."
|
|
::= { jnxPingProbeHistoryEntry 4 }
|
|
|
|
jnxPingProbeHistoryEgressJitterUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time difference measured in microseconds between the maximum
|
|
and minimum egress trip times. Each history entry provides a running
|
|
calculation of the jitter (calculated over the current test) at the
|
|
time a probe was completed.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements.
|
|
For all other probe types, the value is irrelevant and will return 0."
|
|
::= { jnxPingProbeHistoryEntry 5 }
|
|
|
|
jnxPingProbeHistoryIngressJitterUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time difference measured in microseconds between the maximum
|
|
and minimum ingress trip times. Each history entry provides a running
|
|
calculation of the jitter (calculated over the current test) at the
|
|
time a probe was completed.
|
|
This applies only if the probe type (pingCtlType) provides one way
|
|
delay measurements.
|
|
For all other probe types, the value is irrelevant and will return 0."
|
|
::= { jnxPingProbeHistoryEntry 6 }
|
|
|
|
|
|
--
|
|
-- Last ping test Results Table
|
|
--
|
|
|
|
jnxPingLastTestResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxPingLastTestResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stores result of the most recently completed test. Entry corresponding
|
|
to a test will be created only after completion of first test."
|
|
::= { jnxPingObjects 5 }
|
|
|
|
jnxPingLastTestResultEntry OBJECT-TYPE
|
|
SYNTAX JnxPingLastTestResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry provides most recently completed test result."
|
|
INDEX {
|
|
jnxPingCtlOwnerIndex,
|
|
jnxPingCtlTestName
|
|
}
|
|
::= { jnxPingLastTestResultTable 1 }
|
|
|
|
JnxPingLastTestResultEntry ::=
|
|
SEQUENCE {
|
|
jnxPingLastTestResultProbeResponses Unsigned32,
|
|
jnxPingLastTestResultSentProbes Unsigned32,
|
|
jnxPingLastTestResultSumRttUs Unsigned32,
|
|
jnxPingLastTestResultMinRttUs Unsigned32,
|
|
jnxPingLastTestResultMaxRttUs Unsigned32,
|
|
jnxPingLastTestResultAvgRttUs Unsigned32,
|
|
jnxPingLastTestResultStdDevRttUs Unsigned32,
|
|
jnxPingLastTestResultMinEgressUs Unsigned32,
|
|
jnxPingLastTestResultMaxEgressUs Unsigned32,
|
|
jnxPingLastTestResultAvgEgressUs Unsigned32,
|
|
jnxPingLastTestResultStddevEgressUs Unsigned32,
|
|
jnxPingLastTestResultMinIngressUs Unsigned32,
|
|
jnxPingLastTestResultMaxIngressUs Unsigned32,
|
|
jnxPingLastTestResultAvgIngressUs Unsigned32,
|
|
jnxPingLastTestResultStddevIngressUs Unsigned32,
|
|
jnxPingLastTestResultPeakToPeakJitterRttUs Unsigned32,
|
|
jnxPingLastTestResultPeakToPeakJitterEgressUs Unsigned32,
|
|
jnxPingLastTestResultPeakToPeakJitterIngressUs Unsigned32,
|
|
jnxPingLastTestResultTime DateAndTime
|
|
}
|
|
|
|
jnxPingLastTestResultProbeResponses OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "responses"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of responses received in the most recently completed test."
|
|
::= { jnxPingLastTestResultEntry 1 }
|
|
|
|
jnxPingLastTestResultSentProbes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "probes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object reflects the number of probes sent in the
|
|
most recently completed test."
|
|
::= { jnxPingLastTestResultEntry 2 }
|
|
|
|
jnxPingLastTestResultSumRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the round trip delays measured for all the probes
|
|
during the most recently completed test. Measured in microseconds."
|
|
::= { jnxPingLastTestResultEntry 3 }
|
|
|
|
jnxPingLastTestResultMinRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of the round trip delays measured for all the probes
|
|
during the most recently completed test. Measured in microseconds."
|
|
::= { jnxPingLastTestResultEntry 4 }
|
|
|
|
jnxPingLastTestResultMaxRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of the round trip delays measured for all the probes
|
|
during the most recently completed test. Measured in microseconds."
|
|
::= { jnxPingLastTestResultEntry 5 }
|
|
|
|
jnxPingLastTestResultAvgRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of the round trip delays measured for all the probes
|
|
during the most recently completed test. Measured in microseconds."
|
|
::= { jnxPingLastTestResultEntry 6 }
|
|
|
|
jnxPingLastTestResultStdDevRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the round trip delays measured during
|
|
the most recently completed test. Measured in microseconds."
|
|
::= { jnxPingLastTestResultEntry 7 }
|
|
|
|
jnxPingLastTestResultMinEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of the egress trip delays measured over all probes
|
|
during the most recently completed test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType) provides
|
|
one-way delay measurements. For all other probe types, their
|
|
values are irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 8 }
|
|
|
|
jnxPingLastTestResultMaxEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of the egress trip delays measured over all probes
|
|
during the most recently completed test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType) provides
|
|
one-way delay measurements. For all other probe types, their
|
|
values are irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 9 }
|
|
|
|
jnxPingLastTestResultAvgEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of the egress trip delays measured over all probes
|
|
during the most recently completed test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType) provides
|
|
one-way delay measurements. For all other probe types, their
|
|
values are irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 10 }
|
|
|
|
jnxPingLastTestResultStddevEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the egress trip delays measured over all
|
|
probes during the most recently completed test. Measured in
|
|
microseconds. This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types, their
|
|
values are irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 11 }
|
|
|
|
jnxPingLastTestResultMinIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of the ingress trip delays measured for over all probes
|
|
during the most recently completed test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType) provides
|
|
one-way delay measurements. For all other probe types, their
|
|
values are irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 12 }
|
|
|
|
jnxPingLastTestResultMaxIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of the ingress trip delays measured over all probes
|
|
during the most recently completed test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType) provides
|
|
one-way delay measurements. For all other probe types, their
|
|
values are irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 13 }
|
|
|
|
jnxPingLastTestResultAvgIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of the ingress trip delays measured over all probes
|
|
during the most recently completed test. Measured in microseconds.
|
|
This applies only if the probe type (pingCtlType) provides
|
|
one-way delay measurements. For all other probe types, their
|
|
values are irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 14 }
|
|
|
|
jnxPingLastTestResultStddevIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the ingress trip delays measured over all
|
|
probes during the most recently completed test. Measured in
|
|
microseconds. This applies only if the probe type (pingCtlType)
|
|
provides one-way delay measurements. For all other probe types,
|
|
their values are irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 15 }
|
|
|
|
jnxPingLastTestResultPeakToPeakJitterRttUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the difference between the min and max delays over
|
|
the course of the last completed test. Measured in microseconds."
|
|
::= { jnxPingLastTestResultEntry 16 }
|
|
|
|
jnxPingLastTestResultPeakToPeakJitterEgressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the difference between the min and max egress trip
|
|
delays over the course of the last completed test. Measured in
|
|
microseconds. This applies only if the probe type (pingCtlType) provides
|
|
one-way delay measurements. For all other probe types, their values are
|
|
irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 17 }
|
|
|
|
jnxPingLastTestResultPeakToPeakJitterIngressUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the difference between the min and max ingress trip
|
|
delays over the course of the last completed test. Measured in
|
|
microseconds. This applies only if the probe type (pingCtlType) provides
|
|
one-way delay measurements. For all other probe types, their values are
|
|
irrelevant and will return 0."
|
|
::= { jnxPingLastTestResultEntry 18 }
|
|
|
|
jnxPingLastTestResultTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timestamp for when the last test was completed."
|
|
::= { jnxPingLastTestResultEntry 19 }
|
|
|
|
|
|
--
|
|
-- Notification definitions
|
|
--
|
|
|
|
jnxPingNotificationPrefix OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All Juniper-specific ping notifications are registered under
|
|
this branch."
|
|
::= { jnxPingNotifications 0 }
|
|
|
|
jnxPingRttThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinRttUs,
|
|
jnxPingResultsMaxRttUs,
|
|
jnxPingResultsAvgRttUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsRttSumOfSquares,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlRttThreshold,
|
|
jnxPingResultsRttUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the round trip time
|
|
(jnxPingCtlRttThreshold) exceeds the configured
|
|
threshold (jnxPingCtlRttThreshold) and the rttThreshold bit is
|
|
set in jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 1 }
|
|
|
|
jnxPingRttStdDevThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinRttUs,
|
|
jnxPingResultsMaxRttUs,
|
|
jnxPingResultsAvgRttUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsRttSumOfSquares,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlRttStdDevThreshold,
|
|
jnxPingResultsStdDevRttUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the standard deviation of
|
|
the round trip time (jnxPingResultsStdDevRttUs) exceeds the
|
|
configured threshold (jnxPingCtlRttStdDevThreshold) and the
|
|
rttStdDevThreshold bit is set in jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 2 }
|
|
|
|
jnxPingRttJitterThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinRttUs,
|
|
jnxPingResultsMaxRttUs,
|
|
jnxPingResultsAvgRttUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsRttSumOfSquares,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlRttJitterThreshold,
|
|
jnxPingResultsJitterRttUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the round trip time jitter
|
|
(jnxPingResultsMaxRttUs minus jnxPingResultsMinRttUs) exceeds the
|
|
configured threshold (jnxPingCtlRttJitterThreshold) and the
|
|
rttJitterThreshold bit is set in jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 3 }
|
|
|
|
jnxPingEgressThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinEgressUs,
|
|
jnxPingResultsMaxEgressUs,
|
|
jnxPingResultsAvgEgressUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlEgressTimeThreshold,
|
|
jnxPingResultsEgressUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the egress time
|
|
(jnxPingResultsEgressUs) exceeds the configured
|
|
threshold (jnxPingCtlEgressTimeThreshold) and the
|
|
egressThreshold bit is set in jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 4 }
|
|
|
|
jnxPingEgressStdDevThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinEgressUs,
|
|
jnxPingResultsMaxEgressUs,
|
|
jnxPingResultsAvgEgressUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingResultsStddevEgressUs,
|
|
jnxPingCtlEgressStdDevThreshold,
|
|
jnxPingResultsStddevEgressUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the standard deviation of
|
|
the egress time (jnxPingResultsStddevEgressUs) exceeds the
|
|
configured threshold (jnxPingCtlEgressStdDevThreshold) and the
|
|
egressStdDevThreshold bit is set in jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 5 }
|
|
|
|
jnxPingEgressJitterThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinEgressUs,
|
|
jnxPingResultsMaxEgressUs,
|
|
jnxPingResultsAvgEgressUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlEgressJitterThreshold,
|
|
jnxPingResultsJitterEgressUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the egress time jitter
|
|
(jnxPingResultsMaxEgressUs minus jnxPingResultsMinEgressUs)
|
|
exceeds the configured threshold (jnxPingCtlEgressJitterThreshold)
|
|
and the egressJitterThreshold bit is set in
|
|
jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 6 }
|
|
|
|
jnxPingIngressThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinIngressUs,
|
|
jnxPingResultsMaxIngressUs,
|
|
jnxPingResultsAvgIngressUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlIngressTimeThreshold,
|
|
jnxPingResultsIngressUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the ingress time
|
|
(jnxPingResultsIngressUs) exceeds the configured
|
|
threshold (jnxPingCtlIngressTimeThreshold) and the
|
|
ingressThreshold bit is set in jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 7 }
|
|
|
|
jnxPingIngressStddevThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinIngressUs,
|
|
jnxPingResultsMaxIngressUs,
|
|
jnxPingResultsAvgIngressUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlIngressStddevThreshold,
|
|
jnxPingResultsStddevIngressUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the standard deviation of
|
|
the ingress time (jnxPingResultsStddevIngressUs) exceeds the
|
|
configured threshold (jnxPingCtlIngressStddevThreshold) and the
|
|
ingressStdDevThreshold bit is set in jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 8 }
|
|
|
|
jnxPingIngressJitterThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinIngressUs,
|
|
jnxPingResultsMaxIngressUs,
|
|
jnxPingResultsAvgIngressUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlIngressJitterThreshold,
|
|
jnxPingResultsJitterIngressUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the ingress time jitter
|
|
(jnxPingResultsMaxIngressUs minus jnxPingResultsMinIngressUs)
|
|
exceeds the configured threshold (jnxPingCtlIngressJitterThreshold)
|
|
and the ingressJitterThreshold bit is set in
|
|
jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 9 }
|
|
|
|
jnxPingMaxRttThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pingCtlTargetAddressType,
|
|
pingCtlTargetAddress,
|
|
pingResultsOperStatus,
|
|
pingResultsIpTargetAddressType,
|
|
pingResultsIpTargetAddress,
|
|
jnxPingResultsMinRttUs,
|
|
jnxPingResultsMaxRttUs,
|
|
jnxPingResultsAvgRttUs,
|
|
pingResultsProbeResponses,
|
|
pingResultsSentProbes,
|
|
pingResultsRttSumOfSquares,
|
|
pingResultsLastGoodProbe,
|
|
jnxPingCtlRttThreshold,
|
|
jnxPingResultsRttUs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the max round trip time
|
|
(jnxPingCtlMaxRttThreshold) exceeds the configured
|
|
threshold (jnxPingCtlMaxRttThreshold) and the maxrttThreshold bit is
|
|
set in jnxPingCtlTrapGeneration."
|
|
::= { jnxPingNotificationPrefix 10 }
|
|
END
|