Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
390 lines
14 KiB
Text
390 lines
14 KiB
Text
-- *******************************************************************
|
|
-- Juniper Services Network Address Translation (NAT) MIB.
|
|
--
|
|
-- Copyright (c) 2010-2013, Juniper Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
-- *******************************************************************
|
|
|
|
JUNIPER-NAT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
Gauge32, Integer32, Unsigned32,
|
|
NOTIFICATION-TYPE,
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
InterfaceIndex FROM IF-MIB
|
|
DateAndTime,
|
|
DisplayString FROM SNMPv2-TC
|
|
InetAddressType,
|
|
InetAddress,
|
|
InetAddressIPv4 FROM INET-ADDRESS-MIB
|
|
jnxSvcsMibRoot FROM JUNIPER-SMI;
|
|
|
|
jnxNatMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201007122022Z" -- July 12, 2010"
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
"Juniper Technical Assistance Center
|
|
Juniper Networks, Inc.
|
|
1133 Innovation Way
|
|
Sunnyvale, CA 94089
|
|
|
|
E-mail: support@juniper.net
|
|
HTTP://www.juniper.net"
|
|
DESCRIPTION
|
|
"This module defines the object that are used to monitor
|
|
network address translation attributes."
|
|
|
|
REVISION "201007122022Z" -- July 12, 2010
|
|
DESCRIPTION "Creation Date"
|
|
|
|
::= { jnxSvcsMibRoot 1 }
|
|
|
|
|
|
jnxNatNotifications OBJECT IDENTIFIER ::= { jnxNatMIB 0 }
|
|
jnxNatObjects OBJECT IDENTIFIER ::= { jnxNatMIB 1 }
|
|
jnxNatTrapVars OBJECT IDENTIFIER ::= { jnxNatMIB 2 }
|
|
|
|
-- ***************************************************************
|
|
-- Source NAT Table
|
|
-- ***************************************************************
|
|
|
|
jnxSrcNatStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxSrcNatStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table exposes the source NAT translation
|
|
attributes of the translated addresses.
|
|
|
|
When performing source IP address translation, the services pic
|
|
translates the original source IP address and/or port
|
|
number to different one. The resource, address source pools
|
|
provide the service pic with a supply of addresses from
|
|
which to draw when performing source network address translation.
|
|
|
|
This table contains information on source IP address
|
|
translation only."
|
|
::= { jnxNatObjects 1 }
|
|
|
|
jnxSrcNatStatsEntry OBJECT-TYPE
|
|
SYNTAX JnxSrcNatStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source NAT address entries. It is indexed by the address
|
|
pool table and the address allocated. "
|
|
INDEX { jnxNatSrcPoolName }
|
|
::= { jnxSrcNatStatsTable 1 }
|
|
|
|
JnxSrcNatStatsEntry ::= SEQUENCE
|
|
{
|
|
jnxNatSrcPoolName DisplayString,
|
|
jnxNatSrcXlatedAddrType INTEGER,
|
|
jnxNatSrcPoolType INTEGER,
|
|
jnxNatSrcNumPortAvail Unsigned32,
|
|
jnxNatSrcNumPortInuse Unsigned32,
|
|
jnxNatSrcNumAddressAvail Unsigned32,
|
|
jnxNatSrcNumAddressInUse Unsigned32,
|
|
jnxNatSrcNumSessions Unsigned32
|
|
}
|
|
|
|
|
|
jnxNatSrcPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of dynamic source IP address pool.
|
|
|
|
This is the address pool where the translated
|
|
address is allocated from. "
|
|
::= { jnxSrcNatStatsEntry 1 }
|
|
|
|
jnxNatSrcXlatedAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4 (1),
|
|
ipv6 (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of dynamic source IP address allocated from
|
|
the address pool used in the NAT translation.
|
|
For NAT MIB, supporting ipv4(1) and ipv6(2) only."
|
|
::= { jnxSrcNatStatsEntry 2 }
|
|
|
|
jnxNatSrcPoolType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static (1),
|
|
dynamic-napt (2),
|
|
dynamic-nat (3),
|
|
basic-nat44 (11),
|
|
dynamic-nat44 (12),
|
|
napt-44 (13),
|
|
dnat-44 (14),
|
|
stateful-nat64 (15),
|
|
stateless-nat64 (16),
|
|
basic-nat-pt (17),
|
|
napt-pt (18),
|
|
basic-nat66 (19),
|
|
stateless-nat66 (20),
|
|
napt-66 (21),
|
|
twice-napt-44 (22),
|
|
twice-basic-nat-44 (23),
|
|
twice-dynamic-nat-44 (24),
|
|
det-napt44 (25),
|
|
sd-napt44 (26)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source NAT can do address translation with or without port
|
|
translation. The source port pool type indicates
|
|
whether the address translation is done with port or without
|
|
the port, or if it is a static translation."
|
|
::= { jnxSrcNatStatsEntry 3 }
|
|
|
|
jnxNatSrcNumPortAvail OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports available with this pool."
|
|
::= { jnxSrcNatStatsEntry 4 }
|
|
|
|
jnxNatSrcNumPortInuse OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports in use for this NAT address entry.
|
|
This attribute is only applicable to translation with
|
|
port translation."
|
|
::= { jnxSrcNatStatsEntry 5 }
|
|
|
|
jnxNatSrcNumAddressAvail OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of addresses available in this pool."
|
|
::= { jnxSrcNatStatsEntry 6 }
|
|
|
|
jnxNatSrcNumAddressInUse OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of addresses in use from this pool.
|
|
This attribute is only applicable to pools used with
|
|
source dynamic translations."
|
|
::= { jnxSrcNatStatsEntry 7 }
|
|
|
|
jnxNatSrcNumSessions OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sessions are in use based on this NAT address
|
|
entry."
|
|
|
|
::= { jnxSrcNatStatsEntry 8 }
|
|
|
|
-- ***************************************************************
|
|
-- NAT Rule Hit Table
|
|
-- ***************************************************************
|
|
|
|
jnxNatRuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxNatRuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table monitors NAT rule hits "
|
|
::= { jnxNatObjects 2 }
|
|
|
|
jnxNatRuleEntry OBJECT-TYPE
|
|
SYNTAX JnxNatRuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT rule hit entries. It is indexed by the rule index"
|
|
INDEX { jnxNatRuleName }
|
|
::= { jnxNatRuleTable 1 }
|
|
|
|
JnxNatRuleEntry ::= SEQUENCE
|
|
{
|
|
jnxNatRuleName DisplayString,
|
|
jnxNatRuleType INTEGER,
|
|
jnxNatRuleTransHits Unsigned32
|
|
}
|
|
|
|
jnxNatRuleName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT rule name"
|
|
::= { jnxNatRuleEntry 1 }
|
|
|
|
jnxNatRuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static-source (1),
|
|
static-destination (2),
|
|
dynamic-source (3),
|
|
napt (4),
|
|
basic-nat44 (11),
|
|
dynamic-nat44 (12),
|
|
napt-44 (13),
|
|
dnat-44 (14),
|
|
stateful-nat64 (15),
|
|
stateless-nat64 (16),
|
|
basic-nat-pt (17),
|
|
napt-pt (18),
|
|
basic-nat66 (19),
|
|
stateless-nat66 (20),
|
|
napt-66 (21),
|
|
twice-napt-44 (22),
|
|
twice-basic-nat-44 (23),
|
|
twice-dynamic-nat-44 (24),
|
|
det-napt44 (25),
|
|
sd-napt44 (26)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT types: Static Source, Static Destination,
|
|
Dynamic Source and NAPT"
|
|
::= { jnxNatRuleEntry 2 }
|
|
|
|
jnxNatRuleTransHits OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of hits on this NAT rule"
|
|
::= { jnxNatRuleEntry 3 }
|
|
|
|
-- ***************************************************************
|
|
-- NAT Pool Hit Table
|
|
-- ***************************************************************
|
|
|
|
jnxNatPoolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxNatPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table monitors NAT pool hits "
|
|
::= { jnxNatObjects 3 }
|
|
|
|
jnxNatPoolEntry OBJECT-TYPE
|
|
SYNTAX JnxNatPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT pool hit entries. It is indexed by the pool index"
|
|
INDEX { jnxNatPoolName }
|
|
::= { jnxNatPoolTable 1 }
|
|
|
|
JnxNatPoolEntry ::= SEQUENCE
|
|
{
|
|
jnxNatPoolName DisplayString,
|
|
jnxNatPoolType INTEGER,
|
|
jnxNatPoolTransHits Unsigned32
|
|
}
|
|
|
|
jnxNatPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT Pool name"
|
|
::= { jnxNatPoolEntry 1 }
|
|
|
|
jnxNatPoolType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static-source (1),
|
|
static-destination (2),
|
|
dynamic-source (3),
|
|
napt (4),
|
|
basic-nat44 (11),
|
|
dynamic-nat44 (12),
|
|
napt-44 (13),
|
|
dnat-44 (14),
|
|
stateful-nat64 (15),
|
|
stateless-nat64 (16),
|
|
basic-nat-pt (17),
|
|
napt-pt (18),
|
|
basic-nat66 (19),
|
|
stateless-nat66 (20),
|
|
napt-66 (21),
|
|
twice-napt-44 (22),
|
|
twice-basic-nat-44 (23),
|
|
twice-dynamic-nat-44 (24),
|
|
det-napt44 (25),
|
|
sd-napt44 (26)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT types: Static Source, Static Destination,
|
|
Dynamic Source and NAPT"
|
|
::= { jnxNatPoolEntry 2 }
|
|
|
|
jnxNatPoolTransHits OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of hits on this NAT Pool"
|
|
::= { jnxNatPoolEntry 3 }
|
|
|
|
-- ***************************************************************
|
|
-- NAT Trap definition
|
|
-- ***************************************************************
|
|
|
|
-- ***************************************************************
|
|
-- Trap variables
|
|
-- ***************************************************************
|
|
|
|
jnxNatAddrPoolUtil OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dynamic address pool utilization in percentage."
|
|
::= { jnxNatTrapVars 1 }
|
|
|
|
jnxNatTrapSrcPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source NAT Pool name who issues trap"
|
|
::= { jnxNatTrapVars 2 }
|
|
|
|
-- ***************************************************************
|
|
-- NAT Address Pool Utilization Threshold Status
|
|
-- ***************************************************************
|
|
|
|
jnxNatAddrPoolThresholdStatus NOTIFICATION-TYPE
|
|
OBJECTS { jnxNatTrapSrcPoolName,
|
|
jnxNatAddrPoolUtil }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Source NAT address pool utilization threshold status
|
|
trap signifies that the address pool utilization
|
|
is either exceeds certain percentage, or clear of
|
|
that percentage.
|
|
|
|
jnxNatTrapPoolName is the name of the resource pool
|
|
jnxNatAddrPoolUtil is the percentage of utilization
|
|
of the address pool."
|
|
::= { jnxNatNotifications 1 }
|
|
|
|
-- ***************************************************************
|
|
-- END of File
|
|
-- ***************************************************************
|
|
END
|