Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
407 lines
14 KiB
Text
407 lines
14 KiB
Text
JUNIPER-ANALYZER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
TruthValue, DisplayString
|
|
FROM SNMPv2-TC
|
|
jnxExAnalyzer
|
|
FROM JUNIPER-EX-SMI;
|
|
|
|
jnxAnalyzerMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201407170000Z"
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Technical Assistance Center
|
|
Juniper Networks, Inc.
|
|
1133 Innovation Way
|
|
Sunnyvale, CA 94089
|
|
E-mail: support@juniper.net"
|
|
|
|
DESCRIPTION
|
|
"This is Juniper Networks' implementation of enterprise specific
|
|
MIB for Analyzer and Remote Analyzer. Port mirroring is widely
|
|
used in enterprise switches to send a copy of all or sampled
|
|
packets seen on a port to an anlyzer on the same or different
|
|
switch."
|
|
|
|
REVISION
|
|
"200808010000Z" -- Fri Aug 01 00:00:00 2008 UTC
|
|
|
|
DESCRIPTION
|
|
"Initial version"
|
|
|
|
REVISION
|
|
"200904220000Z" -- Wed April 22 00:00:00 2009 UTC
|
|
|
|
DESCRIPTION
|
|
"Marking jnxAnalyzerStatus as deprecated"
|
|
|
|
REVISION
|
|
"201007300000Z" -- Fri July 30 00:00:00 2009 UTC
|
|
|
|
DESCRIPTION
|
|
"Marking deprecated OIDs as obsolete"
|
|
|
|
REVISION
|
|
"201407170000Z" -- THU July 17 00:00:00 2014 UTC
|
|
|
|
DESCRIPTION
|
|
"Rectifying typo errors from 'Anlayzer' to 'Analyzer'"
|
|
|
|
::= { jnxExAnalyzer 1 }
|
|
|
|
jnxAnalyzerMIBObjects OBJECT IDENTIFIER ::= { jnxAnalyzerMIB 1 }
|
|
|
|
-- The Analyzer Table
|
|
|
|
jnxAnalyzerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxAnalyzerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network traffic passing through ports is analyzed by sending a
|
|
copy of the traffic to another port on the same or different switch.
|
|
This table contains the analyzer parameters."
|
|
::= { jnxAnalyzerMIBObjects 1 }
|
|
|
|
jnxAnalyzerEntry OBJECT-TYPE
|
|
SYNTAX JnxAnalyzerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row instance contains the Analyzer Name, Analyzer Status, Mirroring
|
|
Ratio, Loss Priority."
|
|
INDEX { jnxAnalyzerName }
|
|
::= { jnxAnalyzerTable 1 }
|
|
|
|
JnxAnalyzerEntry ::=
|
|
SEQUENCE {
|
|
jnxAnalyzerName DisplayString,
|
|
jnxAnalyzerStatus TruthValue,
|
|
jnxMirroringRatio Unsigned32,
|
|
jnxLossPriority INTEGER
|
|
}
|
|
|
|
jnxAnalyzerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a unique Analyzer configured on the switch."
|
|
::= { jnxAnalyzerEntry 1 }
|
|
|
|
jnxAnalyzerStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This object identifies whether the mirroring associated with a
|
|
particular analyzer is enabled or disabled."
|
|
::= { jnxAnalyzerEntry 2 }
|
|
|
|
jnxMirroringRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will specify the mirroring ratio. User can configure
|
|
the analyzer to mirror only one out of X packets [1:X packets] in
|
|
the ingress/egress side based on whether the port is configured for
|
|
ingress or egress mirroring. The configuration supports a range from
|
|
1: X [0 <= X <= 2047].Default value is 1."
|
|
DEFVAL { 1 }
|
|
::= { jnxAnalyzerEntry 3 }
|
|
|
|
jnxLossPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low (0),
|
|
high (1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The analyzer port may be congested when the number of
|
|
packets exceeds the bandwidth of the analyzer port. So the
|
|
loss-priority parameter is enabled. The switched packets
|
|
will not get affected by this. The value 0 corresponds to low
|
|
priority.The value 1 corresponds to high loss priority. "
|
|
::= { jnxAnalyzerEntry 4 }
|
|
|
|
|
|
-- The ANALYZER INPUT Table
|
|
|
|
jnxAnalyzerInputTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxAnalyzerInputEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An analyzer Session is an association of several source ports to
|
|
a destination port.A range or series of ports can be mirrored in
|
|
a session."
|
|
::= { jnxAnalyzerMIBObjects 2 }
|
|
|
|
jnxAnalyzerInputEntry OBJECT-TYPE
|
|
SYNTAX JnxAnalyzerInputEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An Entry is created for each Input Source port."
|
|
INDEX { jnxAnalyzerName, jnxAnalyzerInputValue }
|
|
::= { jnxAnalyzerInputTable 1 }
|
|
|
|
JnxAnalyzerInputEntry ::=
|
|
SEQUENCE {
|
|
jnxAnalyzerInputValue DisplayString,
|
|
jnxAnalyzerInputOption INTEGER,
|
|
jnxAnalyzerInputType INTEGER
|
|
}
|
|
|
|
jnxAnalyzerInputValue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This identifies each different analyzer input source.
|
|
|
|
If the value of jnxAnalyzerInputType is 1 then jnxAnalyzerInputValue
|
|
refers to the input source Interface Name.
|
|
|
|
If the value of jnxAnalyzerInputType is 2 then jnxAnalyzerInputValue
|
|
refers to the input source vlan name."
|
|
::= { jnxAnalyzerInputEntry 1 }
|
|
|
|
jnxAnalyzerInputOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ingress (1),
|
|
egress (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A source port is a switch port that is been mirrored. It can be
|
|
mirrored based either on Ingress(received) traffic or egress
|
|
(transmitted) traffic.
|
|
|
|
The goal of receive (or ingress) Analyzer is to monitor as much as
|
|
possible all the packets received by the source interface. The amount
|
|
of received packets mirrored to the destination port depends on the
|
|
mirroring ratio. A series or range of ingress ports can be mirrored
|
|
in an analyzer session.
|
|
|
|
The goal of transmit (or egress) analyzer is to monitor as much as
|
|
possible all the packets sent by the source interface. The amount
|
|
of egress packets mirrored to the destination port depends on the
|
|
mirroring ratio.The copy is provided after the packet is modified.
|
|
A range of egress ports can be mirrored in an analyzer session.
|
|
The value 1 corresponds to mirroring ingress traffic. The value 2
|
|
corresponds to mirroring egress traffic."
|
|
::= { jnxAnalyzerInputEntry 2 }
|
|
|
|
jnxAnalyzerInputType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
interface (1),
|
|
vlanname (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This specifies whether interfaces or VLANs is mirrored.
|
|
|
|
Mirroring can be done on the basis of the interface name.All packets
|
|
received on a port configured for ingress mirroring is sent to the
|
|
analyzer port.All packets sent out on a port configured for egress
|
|
mirroring is sent to the analyzer port.Any number of network ports
|
|
can be configured for ingress or egress mirroring.The value one of
|
|
jnxAnalayzerInputType corresponds to mirroring the interface traffic.
|
|
|
|
On a particular switch, the user can choose to monitor all the ports
|
|
that belong to a particular VLAN. It is needed in order to analyze
|
|
the network traffic in one or more VLANs.Mirroring can be configured
|
|
in ingress direction only for VLAN.
|
|
|
|
Mirroring can be done on the basis of VLAN name (supported only in
|
|
ingress). All packets received on a particular VLAN are sent out to
|
|
the analyzer.The value two of jnxAnalyzerInputType corresponds to
|
|
mirroring vlan traffic."
|
|
::= { jnxAnalyzerInputEntry 3 }
|
|
|
|
|
|
-- The ANALYZER OUTPUT Table
|
|
|
|
jnxAnalyzerOutputTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxAnalyzerOutputEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the destination port to which the traffic from
|
|
the source ports are copied."
|
|
::= { jnxAnalyzerMIBObjects 3 }
|
|
|
|
jnxAnalyzerOutputEntry OBJECT-TYPE
|
|
SYNTAX JnxAnalyzerOutputEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry is created for each destination port or destination vlan."
|
|
INDEX { jnxAnalyzerName, jnxAnalyzerOutputValue }
|
|
::= { jnxAnalyzerOutputTable 1 }
|
|
|
|
JnxAnalyzerOutputEntry ::=
|
|
SEQUENCE {
|
|
jnxAnalyzerOutputValue DisplayString,
|
|
jnxAnalyzerOutputType INTEGER
|
|
}
|
|
|
|
jnxAnalyzerOutputValue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies each different destination port or
|
|
destination vlan.
|
|
|
|
If the value of jnxAnalyzerOutputType is 1 then jnxAnalyzerOutputValue
|
|
gives the destination interface name.
|
|
|
|
If the value of jnxAnalyzerOutputType is 2 then jnxAnalyzerOutputValue
|
|
gives the destination vlan name."
|
|
::= { jnxAnalyzerOutputEntry 1 }
|
|
|
|
jnxAnalyzerOutputType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
interface (1),
|
|
vlanname (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination port can be on the same switch or on a different
|
|
switch(Remote Analyzer).
|
|
|
|
Value 1 specifies that the destination interface is on the same
|
|
switch and it receives a copy of traffic from the source ports.
|
|
The port does not transmit any traffic except that required for
|
|
the analyzer session.
|
|
|
|
The traffic for each Remote Analyzer session is carried over a
|
|
user-specified Remote Analyzer VLAN that is dedicated for that
|
|
Remote Analyzer session in all participating switches. A special
|
|
vlan is confgiured exclusively for remote mirroring by marking it
|
|
as analyzer vlan. Intermediate switches will have a few ports
|
|
(minimum of 2 ports )as members of the analyzer vlan. These
|
|
are the trunk ports which act as the link between the switches.
|
|
The analyzer ports on the destination switch are also added to
|
|
the Analyzer VLAN.
|
|
|
|
Value 2 specifies that the traffic from all the source ports is
|
|
copied into the Remote Analyzer vlan specified by the vlan name.
|
|
|
|
In the source switch the analyzer session destination is given
|
|
as the analyzer vlan. In the intermediate switches the analyzer
|
|
sessions have the source and the destination as the analyzer vlan.
|
|
The packet will reach the destination ports as it will be a part
|
|
of the analyzer vlan."
|
|
::= { jnxAnalyzerOutputEntry 2 }
|
|
|
|
-- jnxExAnalyzerInputTable Table
|
|
|
|
jnxExAnalyzerInputTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxExAnalyzerInputEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An analyzer Session is an association of several source ports to
|
|
a destination port.A range or series of ports can be mirrored in
|
|
a session."
|
|
::= { jnxAnalyzerMIBObjects 4 }
|
|
|
|
jnxExAnalyzerInputEntry OBJECT-TYPE
|
|
SYNTAX JnxExAnalyzerInputEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry is created for each Input Source port."
|
|
INDEX { jnxAnalyzerName, jnxExAnalyzerInputOption, jnxExAnalyzerInputValue }
|
|
::= { jnxExAnalyzerInputTable 1 }
|
|
|
|
JnxExAnalyzerInputEntry ::=
|
|
SEQUENCE {
|
|
jnxExAnalyzerInputOption INTEGER,
|
|
jnxExAnalyzerInputValue DisplayString,
|
|
jnxExAnalyzerInputType INTEGER
|
|
}
|
|
|
|
jnxExAnalyzerInputOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ingress (1),
|
|
egress (2),
|
|
vlan (3),
|
|
egress-vlan (4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A source port is a switch port that is been mirrored. It can be
|
|
mirrored based either on Ingress(received) traffic or egress
|
|
(transmitted) traffic.
|
|
|
|
The goal of receive (or ingress) Analyzer is to monitor as much as
|
|
possible all the packets received by the source interface. The amount
|
|
of received packets mirrored to the destination port depends on the
|
|
mirroring ratio. A series or range of ingress ports can be mirrored
|
|
in an analyzer session.
|
|
|
|
The goal of transmit (or egress) analyzer is to monitor as much as
|
|
possible all the packets sent by the source interface. The amount
|
|
of egress packets mirrored to the destination port depends on the
|
|
mirroring ratio.The copy is provided after the packet is modified.
|
|
A range of egress ports can be mirrored in an analyzer session.
|
|
The value 1 corresponds to mirroring ingress traffic. The value 2
|
|
corresponds to mirroring egress traffic. The value 3 corresponds to
|
|
mirroring vlan ingress traffic. The value 4 corresponds to mirroring
|
|
vlan egress traffic."
|
|
::= { jnxExAnalyzerInputEntry 1 }
|
|
|
|
jnxExAnalyzerInputValue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This identifies each different analyzer input source.
|
|
|
|
If the value of jnxExAnalyzerInputType is 1 then jnxExAnalyzerInputValue
|
|
refers to the input source Interface Name.
|
|
|
|
If the value of jnxExAnalyzerInputType is 2 then jnxExAnalyzerInputValue
|
|
refers to the input source vlan name."
|
|
::= { jnxExAnalyzerInputEntry 2 }
|
|
|
|
jnxExAnalyzerInputType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
interface (1),
|
|
vlanname (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies whether interfaces or VLANs is mirrored.
|
|
|
|
Mirroring can be done on the basis of the interface name.All packets
|
|
received on a port configured for ingress mirroring is sent to the
|
|
analyzer port.All packets sent out on a port configured for egress
|
|
mirroring is sent to the analyzer port.Any number of network ports
|
|
can be configured for ingress or egress mirroring.The value one of
|
|
jnxAnalyzerInputType corresponds to mirroring the interface traffic.
|
|
|
|
On a particular switch, the user can choose to monitor all the ports
|
|
that belong to a particular VLAN. It is needed in order to analyze
|
|
the network traffic in one or more VLANs.Mirroring can be configured
|
|
in ingress direction only for VLAN.
|
|
|
|
Mirroring can be done on the basis of VLAN name (supported only in
|
|
ingress). All packets received on a particular VLAN are sent out to
|
|
the analyzer.The value two of jnxExAnalyzerInputType corresponds to
|
|
mirroring vlan traffic."
|
|
::= { jnxExAnalyzerInputEntry 3 }
|
|
|
|
END
|