Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
7204 lines
231 KiB
Text
7204 lines
231 KiB
Text
JNX-OPT-IF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Integer32,
|
|
Unsigned32, transmission
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowPointer, RowStatus, TruthValue
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
jnxoptIfMibRoot
|
|
FROM JUNIPER-SMI
|
|
ifIndex
|
|
FROM IF-MIB;
|
|
|
|
|
|
--This is the MIB module for the OTN Interface objects.
|
|
|
|
|
|
jnxoptIfMibModule MODULE-IDENTITY
|
|
LAST-UPDATED "200308130000Z"
|
|
ORGANIZATION "IETF AToM MIB Working Group"
|
|
CONTACT-INFO
|
|
"WG charter:
|
|
http://www.ietf.org/html.charters/atommib-charter.html
|
|
|
|
Mailing Lists:
|
|
General Discussion: atommib@research.telcordia.com
|
|
To Subscribe: atommib-request@research.telcordia.com
|
|
RFC 3591 Optical Interface Type MIB September 2003
|
|
Editor: Hing-Kam Lam
|
|
Postal: Lucent Technologies, Room 4C-616
|
|
101 Crawfords Corner Road
|
|
Holmdel, NJ 07733
|
|
|
|
Tel: +1 732 949 8338
|
|
Email: hklam@lucent.com"
|
|
DESCRIPTION
|
|
"The MIB module to describe pre-OTN and OTN interfaces.
|
|
Copyright (C) The Internet Society (2003). This version
|
|
of this MIB module is part of RFC 3591; see the RFC
|
|
itself for full legal notices."
|
|
|
|
REVISION "200308130000Z"
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 3591."
|
|
::={ jnxoptIfMibRoot 1 }
|
|
|
|
|
|
-- textual conventions
|
|
|
|
|
|
JnxoptIfAcTI ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trace identifier (TI) accepted at the receiver."
|
|
SYNTAX OCTET STRING (SIZE(64))
|
|
|
|
|
|
JnxoptIfBitRateK ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the index that is used to
|
|
represent a supported bit rate and the different
|
|
versions of OPUk, ODUk and OTUk.
|
|
Allowed values of k are defined in ITU-T G.709.
|
|
Currently allowed values in G.709 are:
|
|
k=1 represents an approximate bit rate of 2.5 Gbit/s,
|
|
k=2 represents an approximate bit rate of 10 Gbit/s,
|
|
k=3 represents an approximate bit rate of 40 Gbit/s."
|
|
SYNTAX Integer32
|
|
|
|
JnxoptIfDEGM ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a Degraded Signal
|
|
defect (dDEG). A dDEG shall be declared if JnxoptIfDEGM
|
|
consecutive bad PM Seconds are detected."
|
|
SYNTAX Unsigned32 (2..10)
|
|
|
|
|
|
JnxoptIfDEGThr ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a performance
|
|
monitoring (PM) Second to be bad. A PM Second is declared bad if
|
|
the percentage of detected errored blocks in that second is
|
|
greater than or equal to JnxoptIfDEGThr."
|
|
SYNTAX Unsigned32 (1..100)
|
|
|
|
|
|
JnxoptIfDirectionality ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of an entity."
|
|
SYNTAX INTEGER {
|
|
sink(1),
|
|
source(2),
|
|
bidirectional(3)
|
|
}
|
|
|
|
|
|
JnxoptIfSinkOrSource ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of an entity
|
|
that is allowed only to be a source or sink."
|
|
SYNTAX INTEGER {
|
|
sink(1),
|
|
source(2)
|
|
}
|
|
|
|
|
|
JnxoptIfExDAPI ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Destination Access Point Identifier (DAPI)
|
|
expected by the receiver."
|
|
SYNTAX OCTET STRING (SIZE(16))
|
|
|
|
|
|
JnxoptIfExSAPI ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Source Access Point Identifier (SAPI)
|
|
expected by the receiver."
|
|
SYNTAX OCTET STRING (SIZE(16))
|
|
|
|
|
|
JnxoptIfIntervalNumber ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies a 15-minute interval. The interval
|
|
identified by 1 is the most recently completed interval, and
|
|
the interval identified by n is the interval immediately
|
|
preceding the one identified by n-1."
|
|
SYNTAX Unsigned32 (1..96)
|
|
|
|
|
|
JnxoptIfTIMDetMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of the Trace Identifier Mismatch (TIM)
|
|
Detection function."
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
dapi(2),
|
|
sapi(3),
|
|
both(4)
|
|
}
|
|
|
|
|
|
JnxoptIfTxTI ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trace identifier (TI) transmitted."
|
|
SYNTAX OCTET STRING (SIZE(64))
|
|
|
|
|
|
-- object groups
|
|
|
|
|
|
jnxoptIfObjects OBJECT IDENTIFIER ::= { jnxoptIfMibModule 1 }
|
|
jnxoptIfConfs OBJECT IDENTIFIER ::= { jnxoptIfMibModule 2 }
|
|
|
|
|
|
jnxoptIfOTMn OBJECT IDENTIFIER ::= { jnxoptIfObjects 1 }
|
|
jnxoptIfPerfMon OBJECT IDENTIFIER ::= { jnxoptIfObjects 2 }
|
|
jnxoptIfOTSn OBJECT IDENTIFIER ::= { jnxoptIfObjects 3 }
|
|
jnxoptIfOMSn OBJECT IDENTIFIER ::= { jnxoptIfObjects 4 }
|
|
jnxoptIfOChGroup OBJECT IDENTIFIER ::= { jnxoptIfObjects 5 }
|
|
jnxoptIfOCh OBJECT IDENTIFIER ::= { jnxoptIfObjects 6 }
|
|
|
|
|
|
jnxoptIfOTUk OBJECT IDENTIFIER ::= { jnxoptIfObjects 7 }
|
|
jnxoptIfODUk OBJECT IDENTIFIER ::= { jnxoptIfObjects 8 }
|
|
jnxoptIfODUkT OBJECT IDENTIFIER ::= { jnxoptIfObjects 9 }
|
|
|
|
|
|
jnxoptIfGroups OBJECT IDENTIFIER ::= { jnxoptIfConfs 1 }
|
|
jnxoptIfCompl OBJECT IDENTIFIER ::= { jnxoptIfConfs 2 }
|
|
|
|
|
|
-- the jnxoptIfOTMn group
|
|
-- This group defines the OTM structure information of an
|
|
-- optical interface.
|
|
|
|
|
|
-- OTMn Table
|
|
|
|
|
|
jnxoptIfOTMnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTMnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTMn structure information."
|
|
::= { jnxoptIfOTMn 1 }
|
|
|
|
|
|
jnxoptIfOTMnEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTMnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains the OTMn structure
|
|
information of an optical interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTMnTable 1 }
|
|
|
|
|
|
JnxoptIfOTMnEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTMnOrder Unsigned32,
|
|
jnxoptIfOTMnReduced TruthValue,
|
|
jnxoptIfOTMnBitRates BITS,
|
|
jnxoptIfOTMnInterfaceType SnmpAdminString,
|
|
jnxoptIfOTMnTcmMax Unsigned32,
|
|
jnxoptIfOTMnOpticalReach INTEGER
|
|
}
|
|
|
|
|
|
jnxoptIfOTMnOrder OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..900)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the order of the OTM, which
|
|
represents the maximum number of wavelengths that can be
|
|
supported at the bit rate(s) supported on the interface."
|
|
::= { jnxoptIfOTMnEntry 1 }
|
|
|
|
|
|
jnxoptIfOTMnReduced OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether a reduced or full
|
|
functionality is supported at the interface. A value of
|
|
true means reduced. A value of false means full."
|
|
::= { jnxoptIfOTMnEntry 2 }
|
|
|
|
|
|
jnxoptIfOTMnBitRates OBJECT-TYPE
|
|
SYNTAX BITS { bitRateK1(0), bitRateK2(1), bitRateK3(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute is a bit map representing the bit
|
|
rate or set of bit rates supported on the interface.
|
|
The meaning of each bit position is as follows:
|
|
bitRateK1(0) is set if the 2.5 Gbit/s rate is supported
|
|
bitRateK2(1) is set if the 10 Gbit/s rate is supported
|
|
bitRateK3(2) is set if the 40 Gbit/s rate is supported
|
|
Note that each bit position corresponds to one possible
|
|
value of the type JnxoptIfBitRateK.
|
|
The default value of this attribute is system specific."
|
|
::= { jnxoptIfOTMnEntry 3 }
|
|
|
|
|
|
jnxoptIfOTMnInterfaceType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the type of interface. The value of
|
|
this attribute will affect the behavior of the OTM with
|
|
respect to presence/absence of OTM Overhead Signal (OOS)
|
|
processing and TCM activation. For an IrDI interface,
|
|
there is no OOS processing and TCM activation is limited
|
|
to n levels as specified by a TCM level threshold.
|
|
This object contains two fields that are separated by
|
|
whitespace. The possible values are:
|
|
field 1: one of the 4-character ASCII strings
|
|
'IrDI' or 'IaDI'
|
|
field 2: free-form text consisting of printable
|
|
UTF-8 encoded characters
|
|
Note that field 2 is optional. If it is not present then there
|
|
is no requirement for trailing whitespace after field 1.
|
|
The default values are as follows:
|
|
field 1: 'IaDI' field 2: an empty string."
|
|
::= { jnxoptIfOTMnEntry 4 }
|
|
|
|
|
|
jnxoptIfOTMnTcmMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the maximum number of TCM
|
|
levels allowed for any Optical Channel contained
|
|
in this OTM. A new TCM activation will be rejected
|
|
if the requested level is greater than the threshold.
|
|
If InterfaceType object specifies a type of 'IaDI'
|
|
for this OTM, then this attribute is irrelevant.
|
|
Possible values: unsigned integers in the range
|
|
from 0 to 6 inclusive.
|
|
Default value: 3."
|
|
::= { jnxoptIfOTMnEntry 5 }
|
|
|
|
|
|
jnxoptIfOTMnOpticalReach OBJECT-TYPE
|
|
SYNTAX INTEGER { intraOffice(1), shortHaul(2), longHaul(3),
|
|
veryLongHaul(4), ultraLongHaul(5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the length the optical signal
|
|
may travel before requiring termination or regeneration.
|
|
The meaning of the enumeration are:
|
|
intraOffice(1) - intra-office (as defined in ITU-T G.957)
|
|
shortHaul(2) - short haul (as defined in ITU-T G.957)
|
|
longHaul(3) - long haul (as defined in ITU-T G.957)
|
|
veryLongHaul(4) - very long haul (as defined in ITU-T G.691)
|
|
ultraLongHaul(5)- ultra long haul (as defined in ITU-T G.691)"
|
|
::= { jnxoptIfOTMnEntry 6 }
|
|
|
|
|
|
-- the jnxoptIfPerfMon group
|
|
-- This group defines performance monitoring objects for all
|
|
-- layers.
|
|
|
|
-- PM interval table
|
|
|
|
jnxoptIfPerfMonIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfPerfMonIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of 15-minute performance monitoring interval
|
|
information."
|
|
::= { jnxoptIfPerfMon 1 }
|
|
|
|
|
|
jnxoptIfPerfMonIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfPerfMonIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains 15-minute performance
|
|
monitoring interval information of an interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfPerfMonIntervalTable 1 }
|
|
|
|
|
|
JnxoptIfPerfMonIntervalEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfPerfMonCurrentTimeElapsed Gauge32,
|
|
jnxoptIfPerfMonCurDayTimeElapsed Gauge32,
|
|
jnxoptIfPerfMonIntervalNumIntervals Unsigned32,
|
|
jnxoptIfPerfMonIntervalNumInvalidIntervals Unsigned32
|
|
}
|
|
|
|
jnxoptIfPerfMonCurrentTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds elapsed in the current 15-minute
|
|
performance monitoring interval.
|
|
If, for some reason, such as an adjustment in the NE's
|
|
time-of-day clock, the number of seconds elapsed exceeds
|
|
the maximum value, then the maximum value will be returned."
|
|
::= { jnxoptIfPerfMonIntervalEntry 1 }
|
|
|
|
|
|
jnxoptIfPerfMonCurDayTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds elapsed in the current 24-hour interval
|
|
performance monitoring period.
|
|
If, for some reason, such as an adjustment in the NE
|
|
time-of-day clock, the number of seconds elapsed exceeds
|
|
the maximum value, then the maximum value will be returned."
|
|
::= { jnxoptIfPerfMonIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfPerfMonIntervalNumIntervals OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of 15-minute intervals for which performance
|
|
monitoring data is available. The number is the same for all
|
|
the associated sub layers of the interface.
|
|
An optical interface must be capable of supporting at least
|
|
n intervals, where n is defined as follows:
|
|
The minimum value of n is 4.
|
|
The default of n is 32.
|
|
The maximum value of n is 96.
|
|
The value of this object will be n unless performance
|
|
monitoring was (re-)started for the interface within the last
|
|
(n*15) minutes, in which case the value will be the number of
|
|
complete 15-minute intervals since measurement was
|
|
(re-)started."
|
|
::= { jnxoptIfPerfMonIntervalEntry 3 }
|
|
|
|
|
|
jnxoptIfPerfMonIntervalNumInvalidIntervals OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from 0 to
|
|
jnxoptIfPerfMonIntervalNumIntervals for which no performance
|
|
monitoring data is available and/or the data is invalid."
|
|
::= { jnxoptIfPerfMonIntervalEntry 4 }
|
|
|
|
|
|
-- the jnxoptIfOTSn group
|
|
-- This group handles the configuration and performance
|
|
-- monitoring objects for OTS layers.
|
|
|
|
|
|
-- OTSn config table
|
|
|
|
jnxoptIfOTSnConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTSn configuration information."
|
|
::= { jnxoptIfOTSn 1 }
|
|
|
|
|
|
jnxoptIfOTSnConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn configuration
|
|
information of an interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTSnConfigTable 1 }
|
|
|
|
|
|
JnxoptIfOTSnConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTSnDirectionality JnxoptIfDirectionality,
|
|
jnxoptIfOTSnAprStatus SnmpAdminString,
|
|
jnxoptIfOTSnAprControl SnmpAdminString,
|
|
jnxoptIfOTSnTraceIdentifierTransmitted JnxoptIfTxTI,
|
|
jnxoptIfOTSnDAPIExpected JnxoptIfExDAPI,
|
|
jnxoptIfOTSnSAPIExpected JnxoptIfExSAPI,
|
|
jnxoptIfOTSnTraceIdentifierAccepted JnxoptIfAcTI,
|
|
jnxoptIfOTSnTIMDetMode JnxoptIfTIMDetMode,
|
|
jnxoptIfOTSnTIMActEnabled TruthValue,
|
|
jnxoptIfOTSnCurrentStatus BITS
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnDirectionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfDirectionality
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the entity."
|
|
::= { jnxoptIfOTSnConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnAprStatus OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the status of the Automatic
|
|
Power Reduction (APR) function of the entity. Valid
|
|
values are 'on' and 'off'."
|
|
::= { jnxoptIfOTSnConfigEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnAprControl OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a UTF-8 encoded string that specifies Automatic
|
|
Power Reduction (APR) control actions requested of this entity
|
|
(when written) and that returns the current APR control state
|
|
of this entity (when read). The values are implementation-defined.
|
|
Any implementation that instantiates this object must document the
|
|
set of values that it allows to be written, the set of values
|
|
that it will return, and what each of those values means."
|
|
::= { jnxoptIfOTSnConfigEntry 3 }
|
|
|
|
|
|
jnxoptIfOTSnTraceIdentifierTransmitted OBJECT-TYPE
|
|
SYNTAX JnxoptIfTxTI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trace identifier transmitted.
|
|
This object is applicable when jnxoptIfOTSnDirectionality has the
|
|
value source(2) or bidirectional(3).
|
|
This object does not apply to reduced-capability systems (i.e.,
|
|
those for which jnxoptIfOTMnReduced has the value true(1)) or
|
|
at IrDI interfaces (i.e., when jnxoptIfOTMnInterfaceType field 1
|
|
has the value 'IrDI').
|
|
If no value is ever set by a management entity for the object
|
|
jnxoptIfOTSnTraceIdentifierTransmitted, system-specific default
|
|
value will be used. Any implementation that instantiates this
|
|
object must document the system-specific default value or how it
|
|
is derived."
|
|
::= { jnxoptIfOTSnConfigEntry 4 }
|
|
|
|
|
|
jnxoptIfOTSnDAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExDAPI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DAPI expected by the receiver.
|
|
This object is applicable when jnxoptIfOTSnDirectionality has the
|
|
value sink(1) or bidirectional(3). It has no effect if
|
|
jnxoptIfOTSnTIMDetMode has the value off(1) or sapi(3).
|
|
This object does not apply to reduced-capability systems (i.e.,
|
|
those for which jnxoptIfOTMnReduced has the value true(1)) or
|
|
at IrDI interfaces (i.e., when jnxoptIfOTMnInterfaceType field 1
|
|
has the value 'IrDI')."
|
|
::= { jnxoptIfOTSnConfigEntry 5 }
|
|
|
|
|
|
jnxoptIfOTSnSAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExSAPI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SAPI expected by the receiver.
|
|
This object is applicable when jnxoptIfOTSnDirectionality has the
|
|
value sink(1) or bidirectional(3). It has no effect if
|
|
jnxoptIfOTSnTIMDetMode has the value off(1) or dapi(2).
|
|
This object does not apply to reduced-capability systems (i.e.,
|
|
those for which jnxoptIfOTMnReduced has the value true(1)) or
|
|
at IrDI interfaces (i.e., when jnxoptIfOTMnInterfaceType field 1
|
|
has the value 'IrDI')."
|
|
::= { jnxoptIfOTSnConfigEntry 6 }
|
|
|
|
|
|
jnxoptIfOTSnTraceIdentifierAccepted OBJECT-TYPE
|
|
SYNTAX JnxoptIfAcTI
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual trace identifier received.
|
|
This object is applicable when jnxoptIfOTSnDirectionality has the
|
|
value sink(1) or bidirectional(3). Its value is unspecified
|
|
if jnxoptIfOTSnCurrentStatus has either or both of the
|
|
losO(5) and los(6) bits set.
|
|
This object does not apply to reduced-capability systems (i.e.,
|
|
those for which jnxoptIfOTMnReduced has the value true(1)) or
|
|
at IrDI interfaces (i.e., when jnxoptIfOTMnInterfaceType field 1
|
|
has the value 'IrDI')."
|
|
::= { jnxoptIfOTSnConfigEntry 7 }
|
|
|
|
|
|
jnxoptIfOTSnTIMDetMode OBJECT-TYPE
|
|
SYNTAX JnxoptIfTIMDetMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of the Trace Identifier Mismatch (TIM)
|
|
Detection function. This object is applicable
|
|
when jnxoptIfOTSnDirectionality has the value sink(1)
|
|
or bidirectional(3). The default value is off(1).
|
|
This object does not apply to reduced-capability systems (i.e.,
|
|
those for which jnxoptIfOTMnReduced has the value true(1)) or
|
|
at IrDI interfaces (i.e., when jnxoptIfOTMnInterfaceType field 1
|
|
has the value 'IrDI').
|
|
The default value of this object is off(1)."
|
|
::= { jnxoptIfOTSnConfigEntry 8 }
|
|
|
|
|
|
jnxoptIfOTSnTIMActEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Trace Identifier Mismatch (TIM)
|
|
Consequent Action function is enabled. This object
|
|
is applicable when jnxoptIfOTSnDirectionality has the
|
|
value sink(1) or bidirectional(3). It has no effect
|
|
when the value of jnxoptIfOTSnTIMDetMode is off(1).
|
|
This object does not apply to reduced-capability systems (i.e.,
|
|
those for which jnxoptIfOTMnReduced has the value true(1)) or
|
|
at IrDI interfaces (i.e., when jnxoptIfOTMnInterfaceType field 1
|
|
has the value 'IrDI').
|
|
The default value of this object is false(2)."
|
|
::= { jnxoptIfOTSnConfigEntry 9 }
|
|
|
|
|
|
jnxoptIfOTSnCurrentStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bdiP(0),
|
|
bdiO(1),
|
|
bdi(2),
|
|
tim(3),
|
|
losP(4),
|
|
losO(5),
|
|
los(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the defect condition of the entity, if any.
|
|
This object is applicable when jnxoptIfOTSnDirectionality
|
|
has the value sink(1) or bidirectional(3). In
|
|
reduced-capability systems or at IrDI interfaces
|
|
the only bit position that may be set is los(6)."
|
|
::= { jnxoptIfOTSnConfigEntry 10 }
|
|
|
|
|
|
-- OTSn sink current table
|
|
-- Contains data for the current 15-minute performance monitoring
|
|
-- interval.
|
|
|
|
jnxoptIfOTSnSinkCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnSinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTSn sink performance monitoring information for
|
|
the current 15-minute interval."
|
|
::= { jnxoptIfOTSn 2 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnSinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn sink performance
|
|
monitoring information of an interface for the current
|
|
15-minute interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTSnSinkCurrentTable 1 }
|
|
|
|
|
|
JnxoptIfOTSnSinkCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTSnSinkCurrentSuspectedFlag TruthValue,
|
|
jnxoptIfOTSnSinkCurrentInputPower Integer32,
|
|
jnxoptIfOTSnSinkCurrentLowInputPower Integer32,
|
|
jnxoptIfOTSnSinkCurrentHighInputPower Integer32,
|
|
jnxoptIfOTSnSinkCurrentLowerInputPowerThreshold Integer32,
|
|
jnxoptIfOTSnSinkCurrentUpperInputPowerThreshold Integer32,
|
|
jnxoptIfOTSnSinkCurrentOutputPower Integer32,
|
|
jnxoptIfOTSnSinkCurrentLowOutputPower Integer32,
|
|
jnxoptIfOTSnSinkCurrentHighOutputPower Integer32,
|
|
jnxoptIfOTSnSinkCurrentLowerOutputPowerThreshold Integer32,
|
|
jnxoptIfOTSnSinkCurrentUpperOutputPowerThreshold Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the input."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 3 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 4 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on input power. If
|
|
jnxoptIfOTSnSinkCurrentInputPower drops to this value or below,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 5 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on input power. If
|
|
jnxoptIfOTSnSinkCurrentInputPower reaches or exceeds this value,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 6 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the output."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 7 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 8 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 9 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on output power. If
|
|
jnxoptIfOTSnSinkCurrentOutputPower drops to this value or below,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 10 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on output power. If
|
|
jnxoptIfOTSnSinkCurrentOutputPower reaches or exceeds this value,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOTSnSinkCurrentEntry 11 }
|
|
|
|
|
|
-- OTSn sink interval table
|
|
-- Contains data for previous 15-minute performance monitoring
|
|
-- intervals.
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnSinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of historical OTSn sink performance monitoring
|
|
information."
|
|
::= { jnxoptIfOTSn 3 }
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnSinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn sink performance
|
|
monitoring information of an interface during a particular
|
|
historical interval."
|
|
INDEX { ifIndex, jnxoptIfOTSnSinkIntervalNumber }
|
|
::= { jnxoptIfOTSnSinkIntervalTable 1 }
|
|
|
|
JnxoptIfOTSnSinkIntervalEntry ::=
|
|
|
|
SEQUENCE {
|
|
jnxoptIfOTSnSinkIntervalNumber JnxoptIfIntervalNumber,
|
|
jnxoptIfOTSnSinkIntervalSuspectedFlag TruthValue,
|
|
jnxoptIfOTSnSinkIntervalLastInputPower Integer32,
|
|
jnxoptIfOTSnSinkIntervalLowInputPower Integer32,
|
|
jnxoptIfOTSnSinkIntervalHighInputPower Integer32,
|
|
jnxoptIfOTSnSinkIntervalLastOutputPower Integer32,
|
|
jnxoptIfOTSnSinkIntervalLowOutputPower Integer32,
|
|
jnxoptIfOTSnSinkIntervalHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalNumber OBJECT-TYPE
|
|
SYNTAX JnxoptIfIntervalNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the interval."
|
|
::= { jnxoptIfOTSnSinkIntervalEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOTSnSinkIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalLastInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSinkIntervalEntry 3 }
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSinkIntervalEntry 4 }
|
|
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSinkIntervalEntry 5 }
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSinkIntervalEntry 6 }
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSinkIntervalEntry 7 }
|
|
|
|
|
|
jnxoptIfOTSnSinkIntervalHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSinkIntervalEntry 8 }
|
|
|
|
|
|
-- OTSn sink current day table
|
|
-- Contains data for the current 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOTSnSinkCurDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnSinkCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTSn sink performance monitoring information for
|
|
the current 24-hour interval."
|
|
::= { jnxoptIfOTSn 4 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnSinkCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn sink performance
|
|
monitoring information of an interface for the current
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTSnSinkCurDayTable 1 }
|
|
|
|
|
|
JnxoptIfOTSnSinkCurDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTSnSinkCurDaySuspectedFlag TruthValue,
|
|
jnxoptIfOTSnSinkCurDayLowInputPower Integer32,
|
|
jnxoptIfOTSnSinkCurDayHighInputPower Integer32,
|
|
jnxoptIfOTSnSinkCurDayLowOutputPower Integer32,
|
|
jnxoptIfOTSnSinkCurDayHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnSinkCurDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOTSnSinkCurDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurDayLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkCurDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurDayHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkCurDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkCurDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOTSnSinkCurDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkCurDayEntry 5 }
|
|
|
|
|
|
-- OTSn sink previous day table
|
|
-- Contains data for the previous 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnSinkPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTSn sink performance monitoring information for
|
|
the previous 24-hour interval."
|
|
::= { jnxoptIfOTSn 5 }
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnSinkPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn sink performance
|
|
monitoring information of an interface for the previous
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTSnSinkPrevDayTable 1 }
|
|
|
|
|
|
|
|
|
|
JnxoptIfOTSnSinkPrevDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTSnSinkPrevDaySuspectedFlag TruthValue,
|
|
jnxoptIfOTSnSinkPrevDayLastInputPower Integer32,
|
|
jnxoptIfOTSnSinkPrevDayLowInputPower Integer32,
|
|
jnxoptIfOTSnSinkPrevDayHighInputPower Integer32,
|
|
jnxoptIfOTSnSinkPrevDayLastOutputPower Integer32,
|
|
jnxoptIfOTSnSinkPrevDayLowOutputPower Integer32,
|
|
jnxoptIfOTSnSinkPrevDayHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOTSnSinkPrevDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDayLastInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkPrevDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDayLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkPrevDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDayHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkPrevDayEntry 4 }
|
|
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDayLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkPrevDayEntry 5 }
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkPrevDayEntry 6 }
|
|
|
|
|
|
jnxoptIfOTSnSinkPrevDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSinkPrevDayEntry 7 }
|
|
|
|
|
|
-- OTSn source current table
|
|
-- Contains data for the current 15-minute performance monitoring
|
|
-- interval.
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnSrcCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTSn source performance monitoring information for
|
|
the current 15-minute interval."
|
|
::= { jnxoptIfOTSn 6 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnSrcCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn source performance
|
|
monitoring information of an interface for the current
|
|
15-minute interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTSnSrcCurrentTable 1 }
|
|
|
|
|
|
JnxoptIfOTSnSrcCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTSnSrcCurrentSuspectedFlag TruthValue,
|
|
jnxoptIfOTSnSrcCurrentOutputPower Integer32,
|
|
jnxoptIfOTSnSrcCurrentLowOutputPower Integer32,
|
|
jnxoptIfOTSnSrcCurrentHighOutputPower Integer32,
|
|
jnxoptIfOTSnSrcCurrentLowerOutputPowerThreshold Integer32,
|
|
jnxoptIfOTSnSrcCurrentUpperOutputPowerThreshold Integer32,
|
|
jnxoptIfOTSnSrcCurrentInputPower Integer32,
|
|
jnxoptIfOTSnSrcCurrentLowInputPower Integer32,
|
|
jnxoptIfOTSnSrcCurrentHighInputPower Integer32,
|
|
jnxoptIfOTSnSrcCurrentLowerInputPowerThreshold Integer32,
|
|
jnxoptIfOTSnSrcCurrentUpperInputPowerThreshold Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the output."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 3 }
|
|
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 4 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on output power. If
|
|
jnxoptIfOTSnSrcCurrentOutputPower drops to this value or below,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 5 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on output power. If
|
|
jnxoptIfOTSnSrcCurrentOutputPower reaches or exceeds this value,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 6 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the input."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 7 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 8 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 9 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on input power. If
|
|
jnxoptIfOTSnSrcCurrentInputPower drops to this value or below,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 10 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on input power. If
|
|
jnxoptIfOTSnSrcCurrentInputPower reaches or exceeds this value,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOTSnSrcCurrentEntry 11 }
|
|
|
|
|
|
-- OTSn source interval table
|
|
-- Contains data for previous 15-minute performance monitoring
|
|
-- intervals.
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnSrcIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of historical OTSn source performance monitoring
|
|
information."
|
|
::= { jnxoptIfOTSn 7 }
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnSrcIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn source performance
|
|
monitoring information of an interface during a particular
|
|
historical interval."
|
|
INDEX { ifIndex, jnxoptIfOTSnSrcIntervalNumber }
|
|
::= { jnxoptIfOTSnSrcIntervalTable 1 }
|
|
|
|
|
|
JnxoptIfOTSnSrcIntervalEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTSnSrcIntervalNumber JnxoptIfIntervalNumber,
|
|
jnxoptIfOTSnSrcIntervalSuspectedFlag TruthValue,
|
|
jnxoptIfOTSnSrcIntervalLastOutputPower Integer32,
|
|
jnxoptIfOTSnSrcIntervalLowOutputPower Integer32,
|
|
jnxoptIfOTSnSrcIntervalHighOutputPower Integer32,
|
|
jnxoptIfOTSnSrcIntervalLastInputPower Integer32,
|
|
jnxoptIfOTSnSrcIntervalLowInputPower Integer32,
|
|
jnxoptIfOTSnSrcIntervalHighInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalNumber OBJECT-TYPE
|
|
SYNTAX JnxoptIfIntervalNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the interval."
|
|
::= { jnxoptIfOTSnSrcIntervalEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOTSnSrcIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSrcIntervalEntry 3 }
|
|
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSrcIntervalEntry 4 }
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSrcIntervalEntry 5 }
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalLastInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSrcIntervalEntry 6 }
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSrcIntervalEntry 7 }
|
|
|
|
|
|
jnxoptIfOTSnSrcIntervalHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOTSnSrcIntervalEntry 8 }
|
|
|
|
|
|
-- OTSn source current day table
|
|
-- Contains data for the current 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOTSnSrcCurDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnSrcCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTSn source performance monitoring information for
|
|
the current 24-hour interval."
|
|
::= { jnxoptIfOTSn 8 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnSrcCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn source performance
|
|
monitoring information of an interface for the current
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTSnSrcCurDayTable 1 }
|
|
|
|
|
|
JnxoptIfOTSnSrcCurDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTSnSrcCurDaySuspectedFlag TruthValue,
|
|
jnxoptIfOTSnSrcCurDayLowOutputPower Integer32,
|
|
jnxoptIfOTSnSrcCurDayHighOutputPower Integer32,
|
|
jnxoptIfOTSnSrcCurDayLowInputPower Integer32,
|
|
jnxoptIfOTSnSrcCurDayHighInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnSrcCurDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOTSnSrcCurDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcCurDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcCurDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurDayLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcCurDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOTSnSrcCurDayHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcCurDayEntry 5 }
|
|
|
|
|
|
-- OTSn source previous day table
|
|
-- Contains data for the previous 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTSnSrcPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTSn source performance monitoring information for
|
|
the previous 24-hour interval."
|
|
::= { jnxoptIfOTSn 9 }
|
|
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTSnSrcPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTSn source performance
|
|
monitoring information of an interface for the previous
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTSnSrcPrevDayTable 1 }
|
|
|
|
|
|
JnxoptIfOTSnSrcPrevDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTSnSrcPrevDaySuspectedFlag TruthValue,
|
|
jnxoptIfOTSnSrcPrevDayLastOutputPower Integer32,
|
|
jnxoptIfOTSnSrcPrevDayLowOutputPower Integer32,
|
|
jnxoptIfOTSnSrcPrevDayHighOutputPower Integer32,
|
|
jnxoptIfOTSnSrcPrevDayLastInputPower Integer32,
|
|
jnxoptIfOTSnSrcPrevDayLowInputPower Integer32,
|
|
jnxoptIfOTSnSrcPrevDayHighInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOTSnSrcPrevDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDayLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcPrevDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcPrevDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcPrevDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDayLastInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcPrevDayEntry 5 }
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDayLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcPrevDayEntry 6 }
|
|
|
|
|
|
jnxoptIfOTSnSrcPrevDayHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOTSnSrcPrevDayEntry 7 }
|
|
|
|
|
|
-- the jnxoptIfOMSn group
|
|
-- This group handles the configuration and performance monitoring
|
|
-- information for OMS layers.
|
|
|
|
|
|
-- OMSn config table
|
|
|
|
|
|
|
|
jnxoptIfOMSnConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OMSn configuration information."
|
|
::= { jnxoptIfOMSn 1 }
|
|
|
|
|
|
jnxoptIfOMSnConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn configuration
|
|
information of an interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOMSnConfigTable 1 }
|
|
|
|
|
|
JnxoptIfOMSnConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnDirectionality JnxoptIfDirectionality,
|
|
jnxoptIfOMSnCurrentStatus BITS
|
|
}
|
|
|
|
|
|
jnxoptIfOMSnDirectionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfDirectionality
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the entity."
|
|
::= { jnxoptIfOMSnConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfOMSnCurrentStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
ssfP(0),
|
|
ssfO(1),
|
|
ssf(2),
|
|
bdiP(3),
|
|
bdiO(4),
|
|
bdi(5),
|
|
losP(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the defect condition of the entity, if any.
|
|
This object is applicable only to full capability
|
|
systems whose interface type is IaDI and for which
|
|
jnxoptIfOMSnDirectionality has the value sink(1) or
|
|
bidirectional(3)."
|
|
::= { jnxoptIfOMSnConfigEntry 2 }
|
|
|
|
|
|
-- OMSn sink current table
|
|
-- Contains data for the current 15-minute performance monitoring
|
|
-- interval.
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnSinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OMSn sink performance monitoring information for
|
|
the current 15-minute interval."
|
|
::= { jnxoptIfOMSn 2 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnSinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn sink performance
|
|
monitoring information of an interface for the current
|
|
15-minute interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOMSnSinkCurrentTable 1 }
|
|
|
|
|
|
JnxoptIfOMSnSinkCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnSinkCurrentSuspectedFlag TruthValue,
|
|
jnxoptIfOMSnSinkCurrentAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkCurrentLowAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkCurrentHighAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkCurrentLowerInputPowerThreshold Integer32,
|
|
jnxoptIfOMSnSinkCurrentUpperInputPowerThreshold Integer32,
|
|
jnxoptIfOMSnSinkCurrentOutputPower Integer32,
|
|
jnxoptIfOMSnSinkCurrentLowOutputPower Integer32,
|
|
jnxoptIfOMSnSinkCurrentHighOutputPower Integer32,
|
|
jnxoptIfOMSnSinkCurrentLowerOutputPowerThreshold Integer32,
|
|
jnxoptIfOMSnSinkCurrentUpperOutputPowerThreshold Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 1 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregated optical power of all the DWDM input
|
|
channels."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 2 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power of all the DWDM input
|
|
channels during the current 15-minute interval."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 3 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power of all the DWDM input
|
|
channels during the current 15-minute interval."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 4 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on aggregated input power. If
|
|
jnxoptIfOMSnSinkCurrentAggregatedInputPower drops to this value
|
|
or below, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 5 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on aggregated input power. If
|
|
jnxoptIfOMSnSinkCurrentAggregatedInputPower reaches or exceeds
|
|
this value, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 6 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the output."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 7 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output
|
|
during the current 15-minute interval."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 8 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output
|
|
during the current 15-minute interval."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 9 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on output power. If
|
|
jnxoptIfOMSnSinkCurrentOutputPower drops to this value
|
|
or below, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 10 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on output power. If
|
|
jnxoptIfOMSnSinkCurrentOutputPower reaches or exceeds
|
|
this value, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOMSnSinkCurrentEntry 11 }
|
|
|
|
|
|
-- OMSn sink interval table
|
|
-- Contains data for previous 15-minute performance monitoring
|
|
-- intervals.
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnSinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of historical OMSn sink performance monitoring
|
|
information."
|
|
::= { jnxoptIfOMSn 3 }
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnSinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn sink performance
|
|
monitoring information of an interface during a particular
|
|
historical interval."
|
|
INDEX { ifIndex, jnxoptIfOMSnSinkIntervalNumber }
|
|
::= { jnxoptIfOMSnSinkIntervalTable 1 }
|
|
|
|
|
|
JnxoptIfOMSnSinkIntervalEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnSinkIntervalNumber JnxoptIfIntervalNumber,
|
|
jnxoptIfOMSnSinkIntervalSuspectedFlag TruthValue,
|
|
jnxoptIfOMSnSinkIntervalLastAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkIntervalLowAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkIntervalHighAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkIntervalLastOutputPower Integer32,
|
|
jnxoptIfOMSnSinkIntervalLowOutputPower Integer32,
|
|
jnxoptIfOMSnSinkIntervalHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalNumber OBJECT-TYPE
|
|
SYNTAX JnxoptIfIntervalNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the interval."
|
|
::= { jnxoptIfOMSnSinkIntervalEntry 1 }
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOMSnSinkIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalLastAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last aggregated optical power of all the DWDM input
|
|
channels during the interval."
|
|
::= { jnxoptIfOMSnSinkIntervalEntry 3 }
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power of all the DWDM input
|
|
channels during the interval."
|
|
::= { jnxoptIfOMSnSinkIntervalEntry 4 }
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power of all the DWDM input
|
|
channels during the interval."
|
|
::= { jnxoptIfOMSnSinkIntervalEntry 5 }
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power at the output
|
|
during the interval."
|
|
::= { jnxoptIfOMSnSinkIntervalEntry 6 }
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power at the output
|
|
during the interval."
|
|
::= { jnxoptIfOMSnSinkIntervalEntry 7 }
|
|
|
|
|
|
jnxoptIfOMSnSinkIntervalHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power at the output
|
|
during the interval."
|
|
::= { jnxoptIfOMSnSinkIntervalEntry 8 }
|
|
|
|
|
|
-- OMSn sink current day table
|
|
-- Contains data for the current 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOMSnSinkCurDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnSinkCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OMSn sink performance monitoring information for
|
|
the current 24-hour interval."
|
|
::= { jnxoptIfOMSn 4 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnSinkCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn sink performance
|
|
monitoring information of an interface for the current
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOMSnSinkCurDayTable 1 }
|
|
|
|
|
|
JnxoptIfOMSnSinkCurDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnSinkCurDaySuspectedFlag TruthValue,
|
|
jnxoptIfOMSnSinkCurDayLowAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkCurDayHighAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkCurDayLowOutputPower Integer32,
|
|
jnxoptIfOMSnSinkCurDayHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOMSnSinkCurDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOMSnSinkCurDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurDayLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power of all the DWDM input
|
|
channels during the current 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkCurDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurDayHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power of all the DWDM input
|
|
channels during the current 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkCurDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOMSnSinkCurDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power at the output
|
|
during the current 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkCurDayEntry 4 }
|
|
|
|
|
|
|
|
jnxoptIfOMSnSinkCurDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power at the output
|
|
during the current 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkCurDayEntry 5 }
|
|
|
|
|
|
-- OMSn sink previous day table
|
|
-- Contains data for the previous 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnSinkPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OMSn sink performance monitoring information for
|
|
the previous 24-hour interval."
|
|
::= { jnxoptIfOMSn 5 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnSinkPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn sink performance
|
|
monitoring information of an interface for the previous
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOMSnSinkPrevDayTable 1 }
|
|
|
|
|
|
JnxoptIfOMSnSinkPrevDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnSinkPrevDaySuspectedFlag TruthValue,
|
|
jnxoptIfOMSnSinkPrevDayLastAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkPrevDayLowAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkPrevDayHighAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSinkPrevDayLastOutputPower Integer32,
|
|
jnxoptIfOMSnSinkPrevDayLowOutputPower Integer32,
|
|
jnxoptIfOMSnSinkPrevDayHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOMSnSinkPrevDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDayLastAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last aggregated optical power of all the DWDM input
|
|
channels during the previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkPrevDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDayLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power of all the DWDM input
|
|
channels during the previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkPrevDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDayHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power of all the DWDM input
|
|
channels during the previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkPrevDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDayLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power at the output
|
|
during the previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkPrevDayEntry 5 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power at the output
|
|
during the previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkPrevDayEntry 6 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPrevDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power at the output
|
|
during the previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSinkPrevDayEntry 7 }
|
|
|
|
|
|
-- OMSn source current table
|
|
-- Contains data for the current 15-minute performance monitoring
|
|
-- interval.
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnSrcCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OMSn source performance monitoring information for
|
|
the current 15-minute interval."
|
|
::= { jnxoptIfOMSn 6 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnSrcCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn source performance
|
|
monitoring information of an interface for the current
|
|
15-minute interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOMSnSrcCurrentTable 1 }
|
|
|
|
JnxoptIfOMSnSrcCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnSrcCurrentSuspectedFlag TruthValue,
|
|
jnxoptIfOMSnSrcCurrentOutputPower Integer32,
|
|
jnxoptIfOMSnSrcCurrentLowOutputPower Integer32,
|
|
jnxoptIfOMSnSrcCurrentHighOutputPower Integer32,
|
|
jnxoptIfOMSnSrcCurrentLowerOutputPowerThreshold Integer32,
|
|
jnxoptIfOMSnSrcCurrentUpperOutputPowerThreshold Integer32,
|
|
jnxoptIfOMSnSrcCurrentAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSrcCurrentLowAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSrcCurrentHighAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSrcCurrentLowerInputPowerThreshold Integer32,
|
|
jnxoptIfOMSnSrcCurrentUpperInputPowerThreshold Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 1 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the output."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 2 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 3 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 4 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on output power. If
|
|
jnxoptIfOMSnSrcCurrentOutputPower drops to this value or below,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 5 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on output power. If
|
|
jnxoptIfOMSnSrcCurrentOutputPower reaches or exceeds this value,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 6 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregated optical power at the input."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 7 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power at the input
|
|
during the current 15-minute interval."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 8 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power at the input
|
|
during the current 15-minute interval."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 9 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on aggregated input power. If
|
|
jnxoptIfOMSnSrcCurrentAggregatedInputPower drops to this value
|
|
or below, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 10 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on aggregated input power. If
|
|
jnxoptIfOMSnSrcCurrentAggregatedInputPower reaches or exceeds
|
|
this value, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOMSnSrcCurrentEntry 11 }
|
|
|
|
|
|
-- OMSn source interval table
|
|
-- Contains data for previous 15-minute performance monitoring
|
|
-- intervals.
|
|
|
|
|
|
jnxoptIfOMSnSrcIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnSrcIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of historical OMSn source performance monitoring
|
|
information."
|
|
::= { jnxoptIfOMSn 7 }
|
|
|
|
|
|
jnxoptIfOMSnSrcIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnSrcIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn source performance
|
|
monitoring information of an interface during a particular
|
|
historical interval."
|
|
INDEX { ifIndex, jnxoptIfOMSnSrcIntervalNumber }
|
|
::= { jnxoptIfOMSnSrcIntervalTable 1 }
|
|
|
|
|
|
JnxoptIfOMSnSrcIntervalEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnSrcIntervalNumber JnxoptIfIntervalNumber,
|
|
jnxoptIfOMSnSrcIntervalSuspectedFlag TruthValue,
|
|
jnxoptIfOMSnSrcIntervalLastOutputPower Integer32,
|
|
jnxoptIfOMSnSrcIntervalLowOutputPower Integer32,
|
|
jnxoptIfOMSnSrcIntervalHighOutputPower Integer32,
|
|
jnxoptIfOMSnSrcIntervalLastAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSrcIntervalLowAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSrcIntervalHighAggregatedInputPower Integer32
|
|
}
|
|
|
|
jnxoptIfOMSnSrcIntervalNumber OBJECT-TYPE
|
|
SYNTAX JnxoptIfIntervalNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the interval."
|
|
::= { jnxoptIfOMSnSrcIntervalEntry 1 }
|
|
|
|
jnxoptIfOMSnSrcIntervalSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOMSnSrcIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfOMSnSrcIntervalLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOMSnSrcIntervalEntry 3 }
|
|
|
|
|
|
jnxoptIfOMSnSrcIntervalLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOMSnSrcIntervalEntry 4 }
|
|
|
|
|
|
jnxoptIfOMSnSrcIntervalHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOMSnSrcIntervalEntry 5 }
|
|
|
|
|
|
jnxoptIfOMSnSrcIntervalLastAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last aggregated optical power at the input
|
|
during the interval."
|
|
::= { jnxoptIfOMSnSrcIntervalEntry 6 }
|
|
|
|
|
|
jnxoptIfOMSnSrcIntervalLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power at the input
|
|
during the interval."
|
|
::= { jnxoptIfOMSnSrcIntervalEntry 7 }
|
|
|
|
|
|
jnxoptIfOMSnSrcIntervalHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power at the input
|
|
during the interval."
|
|
::= { jnxoptIfOMSnSrcIntervalEntry 8 }
|
|
|
|
|
|
-- OMSn source current day table
|
|
-- Contains data for the current 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOMSnSrcCurDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnSrcCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OMSn source performance monitoring information for
|
|
the current 24-hour interval."
|
|
::= { jnxoptIfOMSn 8 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnSrcCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn source performance
|
|
monitoring information of an interface for the current
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOMSnSrcCurDayTable 1 }
|
|
|
|
|
|
JnxoptIfOMSnSrcCurDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnSrcCurDaySuspectedFlag TruthValue,
|
|
jnxoptIfOMSnSrcCurDayLowOutputPower Integer32,
|
|
jnxoptIfOMSnSrcCurDayHighOutputPower Integer32,
|
|
jnxoptIfOMSnSrcCurDayLowAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSrcCurDayHighAggregatedInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOMSnSrcCurDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOMSnSrcCurDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcCurDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcCurDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurDayLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power at the input
|
|
during the current 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcCurDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOMSnSrcCurDayHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power at the input
|
|
during the current 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcCurDayEntry 5 }
|
|
|
|
|
|
-- OMSn source previous day table
|
|
-- Contains data for the previous 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOMSnSrcPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OMSn source performance monitoring information for
|
|
the previous 24-hour interval."
|
|
::= { jnxoptIfOMSn 9 }
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOMSnSrcPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OMSn source performance
|
|
monitoring information of an interface for the previous
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOMSnSrcPrevDayTable 1 }
|
|
|
|
|
|
|
|
JnxoptIfOMSnSrcPrevDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOMSnSrcPrevDaySuspectedFlag TruthValue,
|
|
jnxoptIfOMSnSrcPrevDayLastOutputPower Integer32,
|
|
jnxoptIfOMSnSrcPrevDayLowOutputPower Integer32,
|
|
jnxoptIfOMSnSrcPrevDayHighOutputPower Integer32,
|
|
jnxoptIfOMSnSrcPrevDayLastAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSrcPrevDayLowAggregatedInputPower Integer32,
|
|
jnxoptIfOMSnSrcPrevDayHighAggregatedInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOMSnSrcPrevDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDayLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcPrevDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcPrevDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcPrevDayEntry 4 }
|
|
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDayLastAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last aggregated optical power at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcPrevDayEntry 5 }
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDayLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcPrevDayEntry 6 }
|
|
|
|
|
|
jnxoptIfOMSnSrcPrevDayHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOMSnSrcPrevDayEntry 7 }
|
|
|
|
|
|
-- the jnxoptIfOChGroup group
|
|
-- This group handles the configuration and performance monitoring
|
|
-- information for OChGroup layers.
|
|
|
|
|
|
-- OChGroup config table
|
|
|
|
|
|
jnxoptIfOChGroupConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OChGroup configuration information."
|
|
::= { jnxoptIfOChGroup 1 }
|
|
|
|
|
|
jnxoptIfOChGroupConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup configuration
|
|
information of an interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChGroupConfigTable 1 }
|
|
|
|
|
|
JnxoptIfOChGroupConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupDirectionality JnxoptIfDirectionality
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupDirectionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfDirectionality
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the entity."
|
|
::= { jnxoptIfOChGroupConfigEntry 1 }
|
|
|
|
|
|
-- OChGroup sink current table
|
|
-- Contains data for the current 15-minute performance monitoring
|
|
-- interval.
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupSinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OChGroup sink performance monitoring information for
|
|
the current 15-minute interval."
|
|
::= { jnxoptIfOChGroup 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupSinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup sink performance
|
|
monitoring information of an interface for the current
|
|
15-minute interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChGroupSinkCurrentTable 1 }
|
|
|
|
JnxoptIfOChGroupSinkCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupSinkCurrentSuspectedFlag TruthValue,
|
|
jnxoptIfOChGroupSinkCurrentAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurrentLowAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurrentHighAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurrentLowerInputPowerThreshold Integer32,
|
|
jnxoptIfOChGroupSinkCurrentUpperInputPowerThreshold Integer32,
|
|
jnxoptIfOChGroupSinkCurrentOutputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurrentLowOutputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurrentHighOutputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurrentLowerOutputPowerThreshold Integer32,
|
|
jnxoptIfOChGroupSinkCurrentUpperOutputPowerThreshold Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 1 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregated optical power of all the DWDM input
|
|
channels in the OChGroup."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the current 15-minute interval."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the current 15-minute interval."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 4 }
|
|
|
|
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on aggregated input power. If
|
|
jnxoptIfOChGroupSinkCurrentAggregatedInputPower drops to this value
|
|
or below, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 5 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on aggregated input power. If
|
|
jnxoptIfOChGroupSinkCurrentAggregatedInputPower reaches or exceeds
|
|
this value, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 6 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the output
|
|
in the OChGroup."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 7 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output
|
|
in the OChGroup during the current 15-minute interval."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 8 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output
|
|
in the OChGroup during the current 15-minute interval."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 9 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on the output power. If
|
|
jnxoptIfOChGroupSinkCurrentOutputPower drops to this value
|
|
or below, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 10 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on the output power. If
|
|
jnxoptIfOChGroupSinkCurrentOutputPower reaches or exceeds
|
|
this value, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChGroupSinkCurrentEntry 11 }
|
|
|
|
|
|
-- OChGroup sink interval table
|
|
-- Contains data for previous 15-minute performance monitoring
|
|
-- intervals.
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupSinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of historical OChGroup sink performance monitoring
|
|
information."
|
|
::= { jnxoptIfOChGroup 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupSinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup sink performance
|
|
monitoring information of an interface during a particular
|
|
historical interval."
|
|
INDEX { ifIndex, jnxoptIfOChGroupSinkIntervalNumber }
|
|
::= { jnxoptIfOChGroupSinkIntervalTable 1 }
|
|
|
|
|
|
JnxoptIfOChGroupSinkIntervalEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupSinkIntervalNumber JnxoptIfIntervalNumber,
|
|
jnxoptIfOChGroupSinkIntervalSuspectedFlag TruthValue,
|
|
jnxoptIfOChGroupSinkIntervalLastAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkIntervalLowAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkIntervalHighAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkIntervalLastOutputPower Integer32,
|
|
jnxoptIfOChGroupSinkIntervalLowOutputPower Integer32,
|
|
jnxoptIfOChGroupSinkIntervalHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalNumber OBJECT-TYPE
|
|
SYNTAX JnxoptIfIntervalNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the interval."
|
|
::= { jnxoptIfOChGroupSinkIntervalEntry 1 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChGroupSinkIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalLastAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the interval."
|
|
::= { jnxoptIfOChGroupSinkIntervalEntry 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the interval."
|
|
::= { jnxoptIfOChGroupSinkIntervalEntry 4 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the interval."
|
|
::= { jnxoptIfOChGroupSinkIntervalEntry 5 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output
|
|
in the OChGroup during the interval."
|
|
::= { jnxoptIfOChGroupSinkIntervalEntry 6 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output
|
|
in the OChGroup during the interval."
|
|
::= { jnxoptIfOChGroupSinkIntervalEntry 7 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkIntervalHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output
|
|
in the OChGroup during the interval."
|
|
::= { jnxoptIfOChGroupSinkIntervalEntry 8 }
|
|
|
|
|
|
-- OChGroup sink current day table
|
|
-- Contains data for the current 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupSinkCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OChGroup sink performance monitoring information for
|
|
the current 24-hour interval."
|
|
::= { jnxoptIfOChGroup 4 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupSinkCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup sink performance
|
|
monitoring information of an interface for the current
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChGroupSinkCurDayTable 1 }
|
|
|
|
|
|
JnxoptIfOChGroupSinkCurDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupSinkCurDaySuspectedFlag TruthValue,
|
|
jnxoptIfOChGroupSinkCurDayLowAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurDayHighAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurDayLowOutputPower Integer32,
|
|
jnxoptIfOChGroupSinkCurDayHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChGroupSinkCurDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurDayLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the current 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkCurDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurDayHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the current 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkCurDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output
|
|
in the OChGroup during the current 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkCurDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkCurDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output
|
|
in the OChGroup during the current 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkCurDayEntry 5 }
|
|
|
|
|
|
-- OChGroup sink previous day table
|
|
-- Contains data for the previous 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupSinkPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OChGroup sink performance monitoring information for
|
|
the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroup 5 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupSinkPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup sink performance
|
|
monitoring information of an interface for the previous
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChGroupSinkPrevDayTable 1 }
|
|
|
|
|
|
JnxoptIfOChGroupSinkPrevDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupSinkPrevDaySuspectedFlag TruthValue,
|
|
jnxoptIfOChGroupSinkPrevDayLastAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkPrevDayLowAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkPrevDayHighAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSinkPrevDayLastOutputPower Integer32,
|
|
jnxoptIfOChGroupSinkPrevDayLowOutputPower Integer32,
|
|
jnxoptIfOChGroupSinkPrevDayHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChGroupSinkPrevDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDayLastAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkPrevDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDayLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkPrevDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDayHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power of all the DWDM input
|
|
channels in the OChGroup during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkPrevDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDayLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output
|
|
in the OChGroup during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkPrevDayEntry 5 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output
|
|
in the OChGroup during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkPrevDayEntry 6 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPrevDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output
|
|
in the OChGroup during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSinkPrevDayEntry 7 }
|
|
|
|
|
|
-- OChGroup source current table
|
|
-- Contains data for the current 15-minute performance monitoring
|
|
-- interval.
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupSrcCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OChGroup source performance monitoring information for
|
|
the current 15-minute interval."
|
|
::= { jnxoptIfOChGroup 6 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupSrcCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup source performance
|
|
monitoring information of an interface for the current
|
|
15-minute interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChGroupSrcCurrentTable 1 }
|
|
|
|
|
|
JnxoptIfOChGroupSrcCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupSrcCurrentSuspectedFlag TruthValue,
|
|
jnxoptIfOChGroupSrcCurrentOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurrentLowOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurrentHighOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurrentLowerOutputPowerThreshold Integer32,
|
|
jnxoptIfOChGroupSrcCurrentUpperOutputPowerThreshold Integer32,
|
|
jnxoptIfOChGroupSrcCurrentAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurrentLowAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurrentHighAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurrentLowerInputPowerThreshold Integer32,
|
|
jnxoptIfOChGroupSrcCurrentUpperInputPowerThreshold Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 1 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the output."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 4 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on output power. If
|
|
jnxoptIfOChGroupSrcCurrentOutputPower drops to this value or below,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 5 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on output power. If
|
|
jnxoptIfOChGroupSrcCurrentOutputPower reaches or exceeds this value,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 6 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregated optical power monitored at the input."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 7 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power monitored at the input
|
|
during the current 15-minute interval."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 8 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power monitored at the input
|
|
during the current 15-minute interval."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 9 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on input power. If
|
|
jnxoptIfOChGroupSrcCurrentAggregatedInputPower drops to this value
|
|
or below, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 10 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on input power. If
|
|
jnxoptIfOChGroupSrcCurrentAggregatedInputPower reaches or exceeds
|
|
this value, a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChGroupSrcCurrentEntry 11 }
|
|
|
|
|
|
-- OChGroup source interval table
|
|
-- Contains data for previous 15-minute performance monitoring
|
|
-- intervals.
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupSrcIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of historical OChGroup source performance monitoring
|
|
information."
|
|
::= { jnxoptIfOChGroup 7 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupSrcIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup source performance
|
|
monitoring information of an interface during a particular
|
|
historical interval."
|
|
INDEX { ifIndex, jnxoptIfOChGroupSrcIntervalNumber }
|
|
::= { jnxoptIfOChGroupSrcIntervalTable 1 }
|
|
|
|
|
|
JnxoptIfOChGroupSrcIntervalEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupSrcIntervalNumber JnxoptIfIntervalNumber,
|
|
jnxoptIfOChGroupSrcIntervalSuspectedFlag TruthValue,
|
|
jnxoptIfOChGroupSrcIntervalLastOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcIntervalLowOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcIntervalHighOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcIntervalLastAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSrcIntervalLowAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSrcIntervalHighAggregatedInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalNumber OBJECT-TYPE
|
|
SYNTAX JnxoptIfIntervalNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the interval."
|
|
::= { jnxoptIfOChGroupSrcIntervalEntry 1 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChGroupSrcIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOChGroupSrcIntervalEntry 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOChGroupSrcIntervalEntry 4 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOChGroupSrcIntervalEntry 5 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalLastAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last aggregated optical power monitored at the input
|
|
during the interval."
|
|
::= { jnxoptIfOChGroupSrcIntervalEntry 6 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power monitored at the input
|
|
during the interval."
|
|
::= { jnxoptIfOChGroupSrcIntervalEntry 7 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcIntervalHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power monitored at the input
|
|
during the interval."
|
|
::= { jnxoptIfOChGroupSrcIntervalEntry 8 }
|
|
|
|
|
|
-- OChGroup source current day table
|
|
-- Contains data for the current 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupSrcCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OChGroup source performance monitoring information for
|
|
the current 24-hour interval."
|
|
::= { jnxoptIfOChGroup 8 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupSrcCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup source performance
|
|
monitoring information of an interface for the current
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChGroupSrcCurDayTable 1 }
|
|
|
|
|
|
JnxoptIfOChGroupSrcCurDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupSrcCurDaySuspectedFlag TruthValue,
|
|
jnxoptIfOChGroupSrcCurDayLowOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurDayHighOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurDayLowAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSrcCurDayHighAggregatedInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChGroupSrcCurDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcCurDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcCurDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurDayLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power monitored at the input
|
|
during the current 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcCurDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcCurDayHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power monitored at the input
|
|
during the current 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcCurDayEntry 5 }
|
|
|
|
|
|
-- OChGroup source previous day table
|
|
-- Contains data for the previous 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChGroupSrcPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OChGroup source performance monitoring information for
|
|
the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroup 9 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChGroupSrcPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OChGroup source performance
|
|
monitoring information of an interface for the previous
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChGroupSrcPrevDayTable 1 }
|
|
|
|
|
|
JnxoptIfOChGroupSrcPrevDayEntry ::=
|
|
|
|
|
|
SEQUENCE {
|
|
jnxoptIfOChGroupSrcPrevDaySuspectedFlag TruthValue,
|
|
jnxoptIfOChGroupSrcPrevDayLastOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcPrevDayLowOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcPrevDayHighOutputPower Integer32,
|
|
jnxoptIfOChGroupSrcPrevDayLastAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSrcPrevDayLowAggregatedInputPower Integer32,
|
|
jnxoptIfOChGroupSrcPrevDayHighAggregatedInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChGroupSrcPrevDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDayLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcPrevDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcPrevDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcPrevDayEntry 4 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDayLastAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last aggregated optical power monitored at the input
|
|
during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcPrevDayEntry 5 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDayLowAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest aggregated optical power monitored at the input
|
|
during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcPrevDayEntry 6 }
|
|
|
|
|
|
jnxoptIfOChGroupSrcPrevDayHighAggregatedInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest aggregated optical power monitored at the input
|
|
during the previous 24-hour interval."
|
|
::= { jnxoptIfOChGroupSrcPrevDayEntry 7 }
|
|
|
|
|
|
-- the jnxoptIfOCh group
|
|
|
|
|
|
-- This group handles the configuration and
|
|
-- performance monitoring information for OCh layers.
|
|
|
|
|
|
-- OCh config table
|
|
|
|
|
|
jnxoptIfOChConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OCh configuration information."
|
|
::= { jnxoptIfOCh 1 }
|
|
|
|
|
|
jnxoptIfOChConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh configuration
|
|
information of an interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChConfigTable 1 }
|
|
|
|
|
|
JnxoptIfOChConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChDirectionality JnxoptIfDirectionality,
|
|
jnxoptIfOChCurrentStatus BITS
|
|
}
|
|
|
|
|
|
jnxoptIfOChDirectionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfDirectionality
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the entity."
|
|
::= { jnxoptIfOChConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfOChCurrentStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
losP(0),
|
|
los(1),
|
|
oci(2),
|
|
ssfP(3),
|
|
ssfO(4),
|
|
ssf(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the defect condition of the entity, if any.
|
|
This object is applicable when jnxoptIfOChDirectionality
|
|
has the value sink(1) or bidirectional(3).
|
|
In full-capability systems the bit position los(1) is not used.
|
|
In reduced-capability systems or at IrDI interfaces only
|
|
the bit positions los(1) and ssfP(3) are used."
|
|
::= { jnxoptIfOChConfigEntry 2 }
|
|
|
|
|
|
-- OCh sink current table
|
|
-- Contains data for the current 15-minute performance monitoring
|
|
-- interval.
|
|
|
|
|
|
jnxoptIfOChSinkCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChSinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OCh sink performance monitoring information for
|
|
the current 15-minute interval."
|
|
::= { jnxoptIfOCh 2 }
|
|
|
|
|
|
jnxoptIfOChSinkCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChSinkCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh sink performance
|
|
monitoring information for an interface for the current
|
|
15-minute interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChSinkCurrentTable 1 }
|
|
|
|
|
|
JnxoptIfOChSinkCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChSinkCurrentSuspectedFlag TruthValue,
|
|
jnxoptIfOChSinkCurrentInputPower Integer32,
|
|
jnxoptIfOChSinkCurrentLowInputPower Integer32,
|
|
jnxoptIfOChSinkCurrentHighInputPower Integer32,
|
|
jnxoptIfOChSinkCurrentLowerInputPowerThreshold Integer32,
|
|
jnxoptIfOChSinkCurrentUpperInputPowerThreshold Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChSinkCurrentSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChSinkCurrentEntry 1 }
|
|
|
|
|
|
jnxoptIfOChSinkCurrentInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the input."
|
|
::= { jnxoptIfOChSinkCurrentEntry 2 }
|
|
|
|
|
|
jnxoptIfOChSinkCurrentLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOChSinkCurrentEntry 3 }
|
|
|
|
|
|
jnxoptIfOChSinkCurrentHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOChSinkCurrentEntry 4 }
|
|
|
|
|
|
jnxoptIfOChSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on input power. If
|
|
jnxoptIfOChSinkCurrentInputPower drops to this value or below,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChSinkCurrentEntry 5 }
|
|
|
|
|
|
jnxoptIfOChSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on input power. If
|
|
jnxoptIfOChSinkCurrentInputPower reaches or exceeds this value,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChSinkCurrentEntry 6 }
|
|
|
|
|
|
-- OCh sink interval table
|
|
-- Contains data for previous 15-minute performance monitoring
|
|
-- intervals.
|
|
|
|
|
|
jnxoptIfOChSinkIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChSinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of historical OCh sink performance monitoring
|
|
information."
|
|
::= { jnxoptIfOCh 3 }
|
|
|
|
|
|
jnxoptIfOChSinkIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChSinkIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh sink performance
|
|
monitoring information of an interface during a particular
|
|
historical interval."
|
|
INDEX { ifIndex, jnxoptIfOChSinkIntervalNumber }
|
|
::= { jnxoptIfOChSinkIntervalTable 1 }
|
|
|
|
|
|
JnxoptIfOChSinkIntervalEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChSinkIntervalNumber JnxoptIfIntervalNumber,
|
|
jnxoptIfOChSinkIntervalSuspectedFlag TruthValue,
|
|
jnxoptIfOChSinkIntervalLastInputPower Integer32,
|
|
jnxoptIfOChSinkIntervalLowInputPower Integer32,
|
|
jnxoptIfOChSinkIntervalHighInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChSinkIntervalNumber OBJECT-TYPE
|
|
SYNTAX JnxoptIfIntervalNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the interval."
|
|
::= { jnxoptIfOChSinkIntervalEntry 1 }
|
|
|
|
|
|
jnxoptIfOChSinkIntervalSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChSinkIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfOChSinkIntervalLastInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOChSinkIntervalEntry 3 }
|
|
|
|
|
|
jnxoptIfOChSinkIntervalLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOChSinkIntervalEntry 4 }
|
|
|
|
|
|
jnxoptIfOChSinkIntervalHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
interval."
|
|
::= { jnxoptIfOChSinkIntervalEntry 5 }
|
|
|
|
|
|
-- OCh sink current day table
|
|
-- Contains data for the current 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOChSinkCurDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChSinkCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OCh sink performance monitoring information for
|
|
the current 24-hour interval."
|
|
::= { jnxoptIfOCh 4 }
|
|
|
|
|
|
jnxoptIfOChSinkCurDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChSinkCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh sink performance
|
|
monitoring information of an interface for the current
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChSinkCurDayTable 1 }
|
|
|
|
|
|
JnxoptIfOChSinkCurDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChSinkCurDaySuspectedFlag TruthValue,
|
|
jnxoptIfOChSinkCurDayLowInputPower Integer32,
|
|
jnxoptIfOChSinkCurDayHighInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChSinkCurDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChSinkCurDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOChSinkCurDayLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOChSinkCurDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOChSinkCurDayHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOChSinkCurDayEntry 3 }
|
|
|
|
|
|
|
|
-- OCh sink previous day table
|
|
-- Contains data for the previous 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOChSinkPrevDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChSinkPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OCh sink performance monitoring information for
|
|
the previous 24-hour interval."
|
|
::= { jnxoptIfOCh 5 }
|
|
|
|
|
|
jnxoptIfOChSinkPrevDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChSinkPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh sink performance
|
|
monitoring information of an interface for the previous
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChSinkPrevDayTable 1 }
|
|
|
|
|
|
JnxoptIfOChSinkPrevDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChSinkPrevDaySuspectedFlag TruthValue,
|
|
jnxoptIfOChSinkPrevDayLastInputPower Integer32,
|
|
jnxoptIfOChSinkPrevDayLowInputPower Integer32,
|
|
jnxoptIfOChSinkPrevDayHighInputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChSinkPrevDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChSinkPrevDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOChSinkPrevDayLastInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChSinkPrevDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOChSinkPrevDayLowInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChSinkPrevDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOChSinkPrevDayHighInputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the input during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChSinkPrevDayEntry 4 }
|
|
|
|
|
|
-- OCh source current table
|
|
-- Contains data for the current 15-minute performance monitoring
|
|
-- interval.
|
|
|
|
|
|
jnxoptIfOChSrcCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChSrcCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OCh source performance monitoring information for
|
|
the current 15-minute interval."
|
|
::= { jnxoptIfOCh 6 }
|
|
|
|
|
|
jnxoptIfOChSrcCurrentEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChSrcCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh source performance
|
|
monitoring information of an interface for the current
|
|
15-minute interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChSrcCurrentTable 1 }
|
|
|
|
|
|
JnxoptIfOChSrcCurrentEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChSrcCurrentSuspectedFlag TruthValue,
|
|
jnxoptIfOChSrcCurrentOutputPower Integer32,
|
|
jnxoptIfOChSrcCurrentLowOutputPower Integer32,
|
|
jnxoptIfOChSrcCurrentHighOutputPower Integer32,
|
|
jnxoptIfOChSrcCurrentLowerOutputPowerThreshold Integer32,
|
|
jnxoptIfOChSrcCurrentUpperOutputPowerThreshold Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChSrcCurrentSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChSrcCurrentEntry 1 }
|
|
|
|
|
|
jnxoptIfOChSrcCurrentOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optical power monitored at the output."
|
|
::= { jnxoptIfOChSrcCurrentEntry 2 }
|
|
|
|
|
|
jnxoptIfOChSrcCurrentLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOChSrcCurrentEntry 3 }
|
|
|
|
|
|
jnxoptIfOChSrcCurrentHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 15-minute interval."
|
|
::= { jnxoptIfOChSrcCurrentEntry 4 }
|
|
|
|
|
|
jnxoptIfOChSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower limit threshold on output power. If
|
|
jnxoptIfOChSrcCurrentOutputPower drops to this value or below,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChSrcCurrentEntry 5 }
|
|
|
|
|
|
jnxoptIfOChSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper limit threshold on output power. If
|
|
jnxoptIfOChSrcCurrentOutputPower reaches or exceeds this value,
|
|
a Threshold Crossing Alert (TCA) should be sent."
|
|
::= { jnxoptIfOChSrcCurrentEntry 6 }
|
|
|
|
|
|
-- OCh source interval table
|
|
-- Contains data for previous 15-minute performance monitoring
|
|
-- intervals.
|
|
|
|
|
|
jnxoptIfOChSrcIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChSrcIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of historical OCh source performance monitoring
|
|
information."
|
|
::= { jnxoptIfOCh 7 }
|
|
|
|
|
|
jnxoptIfOChSrcIntervalEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChSrcIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh source performance
|
|
monitoring information of an interface during a particular
|
|
historical interval."
|
|
INDEX { ifIndex, jnxoptIfOChSrcIntervalNumber }
|
|
::= { jnxoptIfOChSrcIntervalTable 1 }
|
|
|
|
|
|
JnxoptIfOChSrcIntervalEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChSrcIntervalNumber JnxoptIfIntervalNumber,
|
|
jnxoptIfOChSrcIntervalSuspectedFlag TruthValue,
|
|
jnxoptIfOChSrcIntervalLastOutputPower Integer32,
|
|
jnxoptIfOChSrcIntervalLowOutputPower Integer32,
|
|
jnxoptIfOChSrcIntervalHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChSrcIntervalNumber OBJECT-TYPE
|
|
SYNTAX JnxoptIfIntervalNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies the interval."
|
|
::= { jnxoptIfOChSrcIntervalEntry 1 }
|
|
|
|
|
|
jnxoptIfOChSrcIntervalSuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChSrcIntervalEntry 2 }
|
|
|
|
|
|
jnxoptIfOChSrcIntervalLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOChSrcIntervalEntry 3 }
|
|
|
|
|
|
jnxoptIfOChSrcIntervalLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOChSrcIntervalEntry 4 }
|
|
|
|
|
|
jnxoptIfOChSrcIntervalHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
interval."
|
|
::= { jnxoptIfOChSrcIntervalEntry 5 }
|
|
|
|
|
|
-- OCh source current day table
|
|
-- Contains data for the current 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOChSrcCurDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChSrcCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OCh source performance monitoring information for
|
|
the current 24-hour interval."
|
|
::= { jnxoptIfOCh 8 }
|
|
|
|
|
|
jnxoptIfOChSrcCurDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChSrcCurDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh source performance
|
|
monitoring information of an interface for the current
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChSrcCurDayTable 1 }
|
|
|
|
|
|
JnxoptIfOChSrcCurDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChSrcCurDaySuspectedFlag TruthValue,
|
|
jnxoptIfOChSrcCurDayLowOutputPower Integer32,
|
|
jnxoptIfOChSrcCurDayHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChSrcCurDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChSrcCurDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOChSrcCurDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOChSrcCurDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOChSrcCurDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
current 24-hour interval."
|
|
::= { jnxoptIfOChSrcCurDayEntry 3 }
|
|
|
|
|
|
-- OCh source previous day table
|
|
-- Contains data for the previous 24-hour performance
|
|
-- monitoring interval.
|
|
|
|
|
|
jnxoptIfOChSrcPrevDayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOChSrcPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OCh source performance monitoring information for
|
|
the previous 24-hour interval."
|
|
::= { jnxoptIfOCh 9 }
|
|
|
|
|
|
jnxoptIfOChSrcPrevDayEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOChSrcPrevDayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OCh source performance
|
|
monitoring information of an interface for the previous
|
|
24-hour interval."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOChSrcPrevDayTable 1 }
|
|
|
|
|
|
JnxoptIfOChSrcPrevDayEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOChSrcPrevDaySuspectedFlag TruthValue,
|
|
jnxoptIfOChSrcPrevDayLastOutputPower Integer32,
|
|
jnxoptIfOChSrcPrevDayLowOutputPower Integer32,
|
|
jnxoptIfOChSrcPrevDayHighOutputPower Integer32
|
|
}
|
|
|
|
|
|
jnxoptIfOChSrcPrevDaySuspectedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the data in this entry may be unreliable."
|
|
::= { jnxoptIfOChSrcPrevDayEntry 1 }
|
|
|
|
|
|
jnxoptIfOChSrcPrevDayLastOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChSrcPrevDayEntry 2 }
|
|
|
|
|
|
jnxoptIfOChSrcPrevDayLowOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChSrcPrevDayEntry 3 }
|
|
|
|
|
|
jnxoptIfOChSrcPrevDayHighOutputPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest optical power monitored at the output during the
|
|
previous 24-hour interval."
|
|
::= { jnxoptIfOChSrcPrevDayEntry 4 }
|
|
|
|
|
|
-- the jnxoptIfOTUk group
|
|
-- This group handles the configuration
|
|
-- information for OTUk layers.
|
|
|
|
|
|
-- OTUk config table
|
|
|
|
|
|
jnxoptIfOTUkConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfOTUkConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of OTUk configuration information."
|
|
::= { jnxoptIfOTUk 1 }
|
|
|
|
|
|
|
|
jnxoptIfOTUkConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfOTUkConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains OTUk configuration
|
|
information of an interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfOTUkConfigTable 1 }
|
|
|
|
|
|
JnxoptIfOTUkConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfOTUkDirectionality JnxoptIfDirectionality,
|
|
jnxoptIfOTUkBitRateK JnxoptIfBitRateK,
|
|
jnxoptIfOTUkTraceIdentifierTransmitted JnxoptIfTxTI,
|
|
jnxoptIfOTUkDAPIExpected JnxoptIfExDAPI,
|
|
jnxoptIfOTUkSAPIExpected JnxoptIfExSAPI,
|
|
jnxoptIfOTUkTraceIdentifierAccepted JnxoptIfAcTI,
|
|
jnxoptIfOTUkTIMDetMode JnxoptIfTIMDetMode,
|
|
jnxoptIfOTUkTIMActEnabled TruthValue,
|
|
jnxoptIfOTUkDEGThr JnxoptIfDEGThr,
|
|
jnxoptIfOTUkDEGM JnxoptIfDEGM,
|
|
jnxoptIfOTUkSinkAdaptActive TruthValue,
|
|
jnxoptIfOTUkSourceAdaptActive TruthValue,
|
|
jnxoptIfOTUkSinkFECEnabled TruthValue,
|
|
jnxoptIfOTUkCurrentStatus BITS
|
|
}
|
|
|
|
|
|
jnxoptIfOTUkDirectionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfDirectionality
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the entity."
|
|
::= { jnxoptIfOTUkConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfOTUkBitRateK OBJECT-TYPE
|
|
SYNTAX JnxoptIfBitRateK
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the bit rate of the entity."
|
|
::= { jnxoptIfOTUkConfigEntry 2 }
|
|
|
|
|
|
jnxoptIfOTUkTraceIdentifierTransmitted OBJECT-TYPE
|
|
SYNTAX JnxoptIfTxTI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trace identifier transmitted.
|
|
This object is applicable when jnxoptIfOTUkDirectionality
|
|
has the value source(2) or bidirectional(3). It must not
|
|
be instantiated in rows where jnxoptIfOTUkDirectionality
|
|
has the value sink(1).
|
|
If no value is ever set by a management entity for this
|
|
object, system-specific default value will be used.
|
|
Any implementation that instantiates this object must
|
|
document the system-specific default value or how it
|
|
is derived."
|
|
::= { jnxoptIfOTUkConfigEntry 3 }
|
|
|
|
|
|
jnxoptIfOTUkDAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExDAPI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DAPI expected by the receiver.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
This object has no effect when jnxoptIfOTUkTIMDetMode has
|
|
the value off(1)."
|
|
::= { jnxoptIfOTUkConfigEntry 4 }
|
|
|
|
|
|
jnxoptIfOTUkSAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExSAPI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SAPI expected by the receiver.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
This object has no effect when jnxoptIfOTUkTIMDetMode has
|
|
the value off(1)."
|
|
::= { jnxoptIfOTUkConfigEntry 5 }
|
|
|
|
|
|
jnxoptIfOTUkTraceIdentifierAccepted OBJECT-TYPE
|
|
SYNTAX JnxoptIfAcTI
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual trace identifier accepted.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
The value of this object is unspecified when
|
|
jnxoptIfOTUkCurrentStatus indicates a near-end defect
|
|
(i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents
|
|
extraction of the trace message."
|
|
::= { jnxoptIfOTUkConfigEntry 6 }
|
|
|
|
|
|
jnxoptIfOTUkTIMDetMode OBJECT-TYPE
|
|
SYNTAX JnxoptIfTIMDetMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of the Trace Identifier Mismatch (TIM)
|
|
Detection function.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
The default value of this object is off(1)."
|
|
::= { jnxoptIfOTUkConfigEntry 7 }
|
|
|
|
|
|
jnxoptIfOTUkTIMActEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Trace Identifier Mismatch (TIM)
|
|
Consequent Action function is enabled.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
This object has no effect when jnxoptIfOTUkTIMDetMode has
|
|
the value off(1).
|
|
The default value of this object is false(2)."
|
|
::= { jnxoptIfOTUkConfigEntry 8 }
|
|
|
|
|
|
jnxoptIfOTUkDEGThr OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGThr
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a performance
|
|
monitoring (PM) Second to be bad. A PM Second is declared bad if
|
|
the percentage of detected errored blocks in that second is
|
|
greater than or equal to jnxoptIfOTUkDEGThr.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
The default value of this object is Severely Errored Second
|
|
(SES) Estimator (See ITU-T G.7710)."
|
|
::= { jnxoptIfOTUkConfigEntry 9 }
|
|
|
|
|
|
jnxoptIfOTUkDEGM OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGM
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a Degraded Signal
|
|
defect (dDEG). A dDEG shall be declared if jnxoptIfOTUkDEGM
|
|
consecutive bad PM Seconds are detected.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
The default value of this object is 7 (See ITU-T G.7710)."
|
|
::= { jnxoptIfOTUkConfigEntry 10 }
|
|
|
|
|
|
jnxoptIfOTUkSinkAdaptActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the sink adaptation function is activated or
|
|
not.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
The default value of this object is false(2)."
|
|
::= { jnxoptIfOTUkConfigEntry 11 }
|
|
|
|
|
|
jnxoptIfOTUkSourceAdaptActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the source adaptation function is activated or
|
|
not.
|
|
This object is only applicable to the source function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value source(2)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value sink(1).
|
|
The default value of this object is false(2)."
|
|
::= { jnxoptIfOTUkConfigEntry 12 }
|
|
|
|
|
|
jnxoptIfOTUkSinkFECEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Forward Error Correction (FEC) is supported, this object
|
|
indicates whether FEC at the OTUk sink adaptation function is
|
|
enabled or not.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2).
|
|
The default value of this object is true(1)."
|
|
::= { jnxoptIfOTUkConfigEntry 13 }
|
|
|
|
|
|
jnxoptIfOTUkCurrentStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
tim(0),
|
|
deg(1),
|
|
bdi(2),
|
|
ssf(3),
|
|
lof(4),
|
|
ais(5),
|
|
lom(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the defect condition of the entity, if any.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfOTUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfOTUkDirectionality has the value source(2)."
|
|
::= { jnxoptIfOTUkConfigEntry 14 }
|
|
|
|
|
|
-- GCC0 config table
|
|
|
|
|
|
jnxoptIfGCC0ConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfGCC0ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of GCC0 configuration information."
|
|
::= { jnxoptIfOTUk 2 }
|
|
|
|
|
|
jnxoptIfGCC0ConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfGCC0ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains GCC0 configuration
|
|
information of an interface. Each instance must
|
|
correspond to an instance of jnxoptIfOTUkConfigEntry.
|
|
Separate source and/or sink instances may exist
|
|
for a given ifIndex value, or a single bidirectional
|
|
instance may exist, but a bidirectional instance may
|
|
not coexist with a source or sink instance.
|
|
Instances of this conceptual row persist across
|
|
agent restarts."
|
|
INDEX { ifIndex, jnxoptIfGCC0Directionality }
|
|
::= { jnxoptIfGCC0ConfigTable 1 }
|
|
|
|
|
|
JnxoptIfGCC0ConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfGCC0Directionality JnxoptIfDirectionality,
|
|
jnxoptIfGCC0Application SnmpAdminString,
|
|
jnxoptIfGCC0RowStatus RowStatus
|
|
}
|
|
|
|
|
|
jnxoptIfGCC0Directionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfDirectionality
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the entity.
|
|
The values source(2) and bidirectional(3) are
|
|
not allowed if the corresponding instance of
|
|
jnxoptIfOTUkDirectionality has the value sink(1).
|
|
The values sink(1) and bidirectional(3) are
|
|
not allowed if the corresponding instance of
|
|
jnxoptIfOTUkDirectionality has the value source(2)."
|
|
::= { jnxoptIfGCC0ConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfGCC0Application OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the application transported by the GCC0 entity.
|
|
Example applications are ECC, User data channel.
|
|
The value of this object may not be changed when
|
|
jnxoptIfGCC0RowStatus has the value active(1)."
|
|
::= { jnxoptIfGCC0ConfigEntry 2 }
|
|
|
|
|
|
jnxoptIfGCC0RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This columnar object is used for creating and deleting a
|
|
conceptual row of the jnxoptIfGCC0 config table.
|
|
It is used to model the addGCC0Access and removeGCC0Access
|
|
operations of an OTUk_TTP for GCC0 access control as defined
|
|
in G.874.1. Setting RowStatus to createAndGo or createAndWait
|
|
implies addGCC0Access. Setting RowStatus to destroy implies
|
|
removeGCC0Access."
|
|
::= { jnxoptIfGCC0ConfigEntry 3 }
|
|
|
|
|
|
-- the jnxoptIfODUk group
|
|
-- This group handles the configuration information
|
|
-- for the ODUk layers.
|
|
|
|
|
|
-- ODUk config table
|
|
|
|
|
|
jnxoptIfODUkConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfODUkConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of ODUk configuration information."
|
|
::= { jnxoptIfODUk 1 }
|
|
|
|
|
|
jnxoptIfODUkConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfODUkConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains ODUk configuration
|
|
information of an interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfODUkConfigTable 1 }
|
|
|
|
|
|
JnxoptIfODUkConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfODUkDirectionality JnxoptIfDirectionality,
|
|
jnxoptIfODUkBitRateK JnxoptIfBitRateK,
|
|
jnxoptIfODUkTcmFieldsInUse BITS,
|
|
jnxoptIfODUkPositionSeqCurrentSize Unsigned32,
|
|
jnxoptIfODUkTtpPresent TruthValue
|
|
}
|
|
|
|
|
|
jnxoptIfODUkDirectionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfDirectionality
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the entity."
|
|
::= { jnxoptIfODUkConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfODUkBitRateK OBJECT-TYPE
|
|
SYNTAX JnxoptIfBitRateK
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the bit rate of the entity."
|
|
::= { jnxoptIfODUkConfigEntry 2 }
|
|
|
|
|
|
jnxoptIfODUkTcmFieldsInUse OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
tcmField1(0),
|
|
tcmField2(1),
|
|
tcmField3(2),
|
|
tcmField4(3),
|
|
tcmField5(4),
|
|
tcmField6(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the TCM field(s) that are currently in use.
|
|
The positions of the bits correspond to the TCM fields.
|
|
A bit that is set to 1 means that the corresponding TCM
|
|
field is used. This object will be updated when rows are
|
|
created in or deleted from the jnxoptIfODUkTConfigTable, or
|
|
the jnxoptIfODUkTNimConfigTable."
|
|
::= { jnxoptIfODUkConfigEntry 3 }
|
|
|
|
|
|
jnxoptIfODUkPositionSeqCurrentSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the current size of the position
|
|
sequence (i.e., number of TCM function and/or GCC12
|
|
access that have been created in the ODUk interface).
|
|
When the value of this variable is greater than zero,
|
|
it means that one or more TCM function and/or GCC12
|
|
access have been created in the ODUk interface. In this
|
|
case, there will be as many rows in the
|
|
jnxoptIfODUkPositionSeqTable as the value of
|
|
jnxoptIfODUkPositionSeqCurrentSize corresponding to this
|
|
ODUk interface, one row for each TCM function or GCC12
|
|
access. The position of the TCM function and/or
|
|
GCC12 access within the sequence is indicated by the
|
|
jnxoptIfODUkPositionSeqPosition variable in
|
|
jnxoptIfODUkPositionSeqTable.
|
|
The jnxoptIfODUkPositionSeqTable also provides pointers
|
|
to the corresponding TCM function (jnxoptIfODUkT) and
|
|
GCC12 access (jnxoptIfGCC12) entities."
|
|
::= { jnxoptIfODUkConfigEntry 4 }
|
|
|
|
|
|
jnxoptIfODUkTtpPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object has the value true(1) if the ifEntry under which
|
|
it is instantiated contains an ODUk Trail Termination Point,
|
|
i.e., is the endpoint of an ODUk path. In that case there
|
|
will be a corresponding row in the ODUk TTP config table and
|
|
it will not be possible to create corresponding rows in the
|
|
ODUk NIM config table. This object has the value false(2)
|
|
if the ifEntry under which it is instantiated contains an
|
|
intermediate ODUk Connection Termination Point. In that case
|
|
there is no corresponding row in the ODUk TTP config table,
|
|
but it will be possible to create corresponding rows in the
|
|
ODUk NIM config table. This object also affects the allowable
|
|
options in rows created in the GCC12 config table and in the
|
|
ODUkT config table, as specified in the DESCRIPTION clauses
|
|
of the columns in those tables."
|
|
::= { jnxoptIfODUkConfigEntry 5 }
|
|
|
|
|
|
-- ODUk Trail Termination Point (TTP) config table
|
|
|
|
|
|
jnxoptIfODUkTtpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfODUkTtpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of ODUk TTP configuration information."
|
|
::= { jnxoptIfODUk 2 }
|
|
|
|
|
|
jnxoptIfODUkTtpConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfODUkTtpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains ODUk TTP configuration
|
|
information of an interface."
|
|
INDEX { ifIndex }
|
|
::= { jnxoptIfODUkTtpConfigTable 1 }
|
|
|
|
|
|
JnxoptIfODUkTtpConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfODUkTtpTraceIdentifierTransmitted JnxoptIfTxTI,
|
|
jnxoptIfODUkTtpDAPIExpected JnxoptIfExDAPI,
|
|
jnxoptIfODUkTtpSAPIExpected JnxoptIfExSAPI,
|
|
jnxoptIfODUkTtpTraceIdentifierAccepted JnxoptIfAcTI,
|
|
jnxoptIfODUkTtpTIMDetMode JnxoptIfTIMDetMode,
|
|
jnxoptIfODUkTtpTIMActEnabled TruthValue,
|
|
jnxoptIfODUkTtpDEGThr JnxoptIfDEGThr,
|
|
jnxoptIfODUkTtpDEGM JnxoptIfDEGM,
|
|
jnxoptIfODUkTtpCurrentStatus BITS
|
|
}
|
|
|
|
|
|
jnxoptIfODUkTtpTraceIdentifierTransmitted OBJECT-TYPE
|
|
SYNTAX JnxoptIfTxTI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trace identifier transmitted.
|
|
This object is applicable when jnxoptIfODUkDirectionality
|
|
has the value source(2) or bidirectional(3). It must not
|
|
be instantiated in rows where jnxoptIfODUkDirectionality
|
|
has the value sink(1).
|
|
If no value is ever set by a management entity for this
|
|
object, system-specific default value will be used.
|
|
Any implementation that instantiates this object must
|
|
document the system-specific default value or how it
|
|
is derived."
|
|
::= { jnxoptIfODUkTtpConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfODUkTtpDAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExDAPI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DAPI expected by the receiver.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfODUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfODUkDirectionality has the value source(2).
|
|
This object has no effect when jnxoptIfODUkTtpTIMDetMode has
|
|
the value off(1)."
|
|
::= { jnxoptIfODUkTtpConfigEntry 2 }
|
|
|
|
|
|
|
|
jnxoptIfODUkTtpSAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExSAPI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SAPI expected by the receiver.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfODUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfODUkDirectionality has the value source(2).
|
|
This object has no effect when jnxoptIfODUkTtpTIMDetMode has
|
|
the value off(1)."
|
|
::= { jnxoptIfODUkTtpConfigEntry 3 }
|
|
|
|
|
|
jnxoptIfODUkTtpTraceIdentifierAccepted OBJECT-TYPE
|
|
SYNTAX JnxoptIfAcTI
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual trace identifier accepted.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfODUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfODUkDirectionality has the value source(2).
|
|
The value of this object is unspecified when
|
|
jnxoptIfODUkTtpCurrentStatus indicates a near-end defect
|
|
(i.e., oci(0), lck(1), ssf(5)) that prevents extraction
|
|
of the trace message."
|
|
::= { jnxoptIfODUkTtpConfigEntry 4 }
|
|
|
|
|
|
jnxoptIfODUkTtpTIMDetMode OBJECT-TYPE
|
|
SYNTAX JnxoptIfTIMDetMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of the Trace Identifier Mismatch (TIM)
|
|
Detection function.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfODUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfODUkDirectionality has the value source(2).
|
|
The default value of this object is off(1)."
|
|
::= { jnxoptIfODUkTtpConfigEntry 5 }
|
|
|
|
|
|
jnxoptIfODUkTtpTIMActEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Trace Identifier Mismatch (TIM)
|
|
Consequent Action function is enabled.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfODUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfODUkDirectionality has the value source(2).
|
|
This object has no effect when jnxoptIfODUkTtpTIMDetMode has
|
|
the value off(1).
|
|
The default value of this object is false(2)."
|
|
::= { jnxoptIfODUkTtpConfigEntry 6 }
|
|
|
|
|
|
jnxoptIfODUkTtpDEGThr OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGThr
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a performance
|
|
monitoring (PM) Second to be bad. A PM Second is declared bad if
|
|
the percentage of detected errored blocks in that second is
|
|
greater than or equal to jnxoptIfODUkDEGThr.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfODUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfODUkDirectionality has the value source(2).
|
|
The default value of this object is Severely Errored Second
|
|
(SES) Estimator (See ITU-T G.7710)."
|
|
::= { jnxoptIfODUkTtpConfigEntry 7 }
|
|
|
|
|
|
jnxoptIfODUkTtpDEGM OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGM
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a Degraded Signal
|
|
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkDEGM
|
|
consecutive bad PM Seconds are detected.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfODUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfODUkDirectionality has the value source(2).
|
|
The default value of this object is 7 (See ITU-T G.7710)."
|
|
::= { jnxoptIfODUkTtpConfigEntry 8 }
|
|
|
|
|
|
jnxoptIfODUkTtpCurrentStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
oci(0),
|
|
lck(1),
|
|
tim(2),
|
|
deg(3),
|
|
bdi(4),
|
|
ssf(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the defect condition of the entity, if any.
|
|
This object is only applicable to the sink function, i.e.,
|
|
only when jnxoptIfODUkDirectionality has the value sink(1)
|
|
or bidirectional(3). It must not be instantiated in rows
|
|
where jnxoptIfODUkDirectionality has the value source(2)."
|
|
::= { jnxoptIfODUkTtpConfigEntry 9 }
|
|
|
|
|
|
-- ODUk Position Sequence table
|
|
|
|
|
|
jnxoptIfODUkPositionSeqTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfODUkPositionSeqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of ODUk Position Sequence information."
|
|
::= { jnxoptIfODUk 3 }
|
|
|
|
|
|
jnxoptIfODUkPositionSeqEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfODUkPositionSeqEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains ODUk position sequence
|
|
information of an ODUk interface. The ODUk interface
|
|
is identified by the ifIndex. Associated with each
|
|
ODUk interface there may be one of more conceptual
|
|
rows in the jnxoptIfODUkPositionSeqTable. Each row
|
|
represents a TCM or GCC12 access function within the
|
|
associated ODUk interface. Rows of the
|
|
jnxoptIfODUkPositionSeqTable table are created/deleted
|
|
as the result of the creation/deletion of the jnxoptIfODUkT
|
|
or jnxoptIfGCC12 entities."
|
|
INDEX { ifIndex, jnxoptIfODUkPositionSeqIndex }
|
|
::= { jnxoptIfODUkPositionSeqTable 1 }
|
|
|
|
|
|
JnxoptIfODUkPositionSeqEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfODUkPositionSeqIndex Unsigned32,
|
|
jnxoptIfODUkPositionSeqPosition Unsigned32,
|
|
jnxoptIfODUkPositionSeqPointer RowPointer
|
|
}
|
|
|
|
|
|
jnxoptIfODUkPositionSeqIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies a row in the
|
|
jnxoptIfODUkPositionSeqTable Table.
|
|
Each row of the jnxoptIfODUkPositionSeqTable Table
|
|
represents a TCM or GCC12 access function within the
|
|
associated ODUk interface."
|
|
::= { jnxoptIfODUkPositionSeqEntry 1 }
|
|
|
|
|
|
jnxoptIfODUkPositionSeqPosition OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the position of the TCM or
|
|
GCC12 access function within the sequence of TCMs &
|
|
GCC12 access functions of the associated ODUk
|
|
interface. The TCM or GCC12 presented by this row is
|
|
referenced by the jnxoptIfODUkPositionSeqPointer variable."
|
|
::= { jnxoptIfODUkPositionSeqEntry 2 }
|
|
|
|
|
|
jnxoptIfODUkPositionSeqPointer OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies the TCM or GCC12 access function
|
|
by pointing to the corresponding jnxoptIfODUkT or jnxoptIfGCC12
|
|
entity."
|
|
::= { jnxoptIfODUkPositionSeqEntry 3 }
|
|
|
|
|
|
-- ODUk Non-intrusive monitoring (Nim) config table
|
|
|
|
|
|
jnxoptIfODUkNimConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfODUkNimConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of ODUkNim configuration information."
|
|
::= { jnxoptIfODUk 4 }
|
|
|
|
|
|
jnxoptIfODUkNimConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfODUkNimConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains ODUkNim configuration
|
|
information of an interface. Each instance must
|
|
correspond to an instance of jnxoptIfODUkConfigEntry
|
|
for which jnxoptIfODUkTtpPresent has the value false(2).
|
|
Instances of this conceptual row persist across
|
|
agent restarts, and read-create columns other
|
|
than the status column may be modified while the
|
|
row is active."
|
|
INDEX { ifIndex, jnxoptIfODUkNimDirectionality }
|
|
::= { jnxoptIfODUkNimConfigTable 1 }
|
|
|
|
|
|
JnxoptIfODUkNimConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfODUkNimDirectionality JnxoptIfSinkOrSource,
|
|
jnxoptIfODUkNimDAPIExpected JnxoptIfExDAPI,
|
|
jnxoptIfODUkNimSAPIExpected JnxoptIfExSAPI,
|
|
jnxoptIfODUkNimTraceIdentifierAccepted JnxoptIfAcTI,
|
|
jnxoptIfODUkNimTIMDetMode JnxoptIfTIMDetMode,
|
|
jnxoptIfODUkNimTIMActEnabled TruthValue,
|
|
jnxoptIfODUkNimDEGThr JnxoptIfDEGThr,
|
|
jnxoptIfODUkNimDEGM JnxoptIfDEGM,
|
|
jnxoptIfODUkNimCurrentStatus BITS,
|
|
jnxoptIfODUkNimRowStatus RowStatus
|
|
}
|
|
|
|
|
|
jnxoptIfODUkNimDirectionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfSinkOrSource
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the monitor point for the ODUk Path non-intrusive
|
|
monitoring function. The value source(2) is not allowed
|
|
if the corresponding instance of jnxoptIfODUkDirectionality
|
|
has the value sink(1), and the value sink(1) is not allowed
|
|
if the corresponding instance of jnxoptIfODUkDirectionality
|
|
has the value source(2). Either the value sink(1) or
|
|
source(2) is allowed if the corresponding instance of
|
|
jnxoptIfODUkDirectionality has the value bidirectional(3).
|
|
The value sink(1) means monitoring at the sink direction
|
|
path signal of the ODUk CTP.
|
|
The value source(2) means monitoring at the source direction
|
|
path signal of the ODUk CTP. Monitoring the source direction
|
|
of an ODUk CTP is necessary in those cases where the ODUk CTP
|
|
is at an SNCP (Subnetwork Connection Protection) end (e.g., see
|
|
Figure I.1.2/G.874.1). If one would like to get the performance
|
|
of the protected connection, one cannot use the NIM function
|
|
at both ODUk CTP sinks (before the matrix), instead one should
|
|
monitor the signal at the source ODUk CTP after the matrix."
|
|
::= { jnxoptIfODUkNimConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfODUkNimDAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExDAPI
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DAPI expected by the receiver.
|
|
This object has no effect if jnxoptIfODUkNimTIMDetMode has
|
|
the value off(1) or sapi(3)."
|
|
::= { jnxoptIfODUkNimConfigEntry 2 }
|
|
|
|
|
|
jnxoptIfODUkNimSAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExSAPI
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SAPI expected by the receiver.
|
|
This object has no effect if jnxoptIfODUkNimTIMDetMode has
|
|
the value off(1) or dapi(2)."
|
|
::= { jnxoptIfODUkNimConfigEntry 3 }
|
|
|
|
|
|
jnxoptIfODUkNimTraceIdentifierAccepted OBJECT-TYPE
|
|
SYNTAX JnxoptIfAcTI
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual trace identifier accepted. The value of
|
|
this object is unspecified if jnxoptIfODUkNimCurrentStatus
|
|
has any of the bit positions oci(0), lck(1), or ssf(5)
|
|
set or if jnxoptIfODUkNimRowStatus has any value other
|
|
than active(1)."
|
|
::= { jnxoptIfODUkNimConfigEntry 4 }
|
|
|
|
|
|
jnxoptIfODUkNimTIMDetMode OBJECT-TYPE
|
|
SYNTAX JnxoptIfTIMDetMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of the Trace Identifier Mismatch (TIM)
|
|
Detection function."
|
|
::= { jnxoptIfODUkNimConfigEntry 5 }
|
|
|
|
|
|
jnxoptIfODUkNimTIMActEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Trace Identifier Mismatch (TIM)
|
|
Consequent Action function is enabled."
|
|
::= { jnxoptIfODUkNimConfigEntry 6 }
|
|
|
|
|
|
jnxoptIfODUkNimDEGThr OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGThr
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a performance
|
|
monitoring (PM) Second to be bad. A PM Second is declared bad
|
|
if the percentage of detected errored blocks in that second is
|
|
greater than or equal to jnxoptIfODUkNimDEGThr."
|
|
::= { jnxoptIfODUkNimConfigEntry 7 }
|
|
|
|
|
|
jnxoptIfODUkNimDEGM OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGM
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a Degraded Signal
|
|
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkNimDEGM
|
|
consecutive bad PM Seconds are detected."
|
|
::= { jnxoptIfODUkNimConfigEntry 8 }
|
|
|
|
|
|
jnxoptIfODUkNimCurrentStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
oci(0),
|
|
lck(1),
|
|
tim(2),
|
|
deg(3),
|
|
bdi(4),
|
|
ssf(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the defect condition of the entity, if
|
|
any. The value of this object is unspecified if
|
|
jnxoptIfODUkNimRowStatus has any value other than
|
|
active(1)."
|
|
::= { jnxoptIfODUkNimConfigEntry 9 }
|
|
|
|
|
|
jnxoptIfODUkNimRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This columnar object is used for creating and deleting
|
|
a conceptual row of the jnxoptIfODUkNim config table.
|
|
It is used to model the activateNim and deactivateNim
|
|
operations of an OTUk_CTP for non-intrusive monitoring
|
|
control as defined in G.874.1. Setting RowStatus to
|
|
createAndGo or createAndWait implies activateNim.
|
|
Setting RowStatus to destroy implies deactivateNim."
|
|
::= { jnxoptIfODUkNimConfigEntry 10 }
|
|
|
|
|
|
-- GCC12 config table
|
|
|
|
|
|
jnxoptIfGCC12ConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfGCC12ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of GCC12 configuration information.
|
|
The GCC function processes the GCC overhead bytes passing
|
|
through them but leave the remainder of the ODUk overhead
|
|
and payload data alone."
|
|
::= { jnxoptIfODUk 5 }
|
|
|
|
|
|
jnxoptIfGCC12ConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfGCC12ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains GCC12 configuration
|
|
information of an interface. Each instance must
|
|
correspond to an instance of jnxoptIfODUkConfigEntry.
|
|
Separate instances providing GCC1-only access and
|
|
GCC2-only access may exist for a given ifIndex value,
|
|
or a single instance providing GCC1 + GCC2 may exist,
|
|
but a GCC1 + GCC2 instance may not coexist with a
|
|
GCC1-only or GCC2-only instance.
|
|
Instances of this conceptual row persist across agent
|
|
restarts."
|
|
INDEX { ifIndex, jnxoptIfGCC12Codirectional, jnxoptIfGCC12GCCAccess }
|
|
::= { jnxoptIfGCC12ConfigTable 1 }
|
|
|
|
|
|
JnxoptIfGCC12ConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfGCC12Codirectional TruthValue,
|
|
jnxoptIfGCC12GCCAccess INTEGER,
|
|
jnxoptIfGCC12GCCPassThrough TruthValue,
|
|
jnxoptIfGCC12Application SnmpAdminString,
|
|
jnxoptIfGCC12RowStatus RowStatus
|
|
}
|
|
|
|
|
|
jnxoptIfGCC12Codirectional OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the GCC12 termination with
|
|
respect to the associated ODUk CTP. The value true(1) means
|
|
that the sink part of the GCC12 extracts COMMS data from the
|
|
signal at the input to the ODUk CTP sink and the source part
|
|
of the GCC12 inserts COMMS data into the signal at the output
|
|
of the ODUk CTP source. The value false(2) means that the
|
|
sink part of the GCC12 extracts COMMS data from the signal at
|
|
the output of the ODUk CTP source and the source part of the
|
|
GCC12 inserts COMMS data into the signal at the input of the
|
|
ODUk CTP sink. This attribute may assume either value when
|
|
the corresponding instance of jnxoptIfODUkTtpPresent has the
|
|
value false(2). When the value of the corresponding instance
|
|
of jnxoptIfODUkTtpPresent is true(1) then the only value allowed
|
|
for this attribute is true(1)."
|
|
::= { jnxoptIfGCC12ConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfGCC12GCCAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gcc1 (1),
|
|
gcc2 (2),
|
|
gcc1and2 (3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the GCC access represented by the entity."
|
|
::= { jnxoptIfGCC12ConfigEntry 2 }
|
|
|
|
|
|
jnxoptIfGCC12GCCPassThrough OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the selected GCC overhead bytes are passed
|
|
through or modified. The value true(1) means that the selected
|
|
GCC overhead bytes are passed through unmodified from the ODUk
|
|
CTP input to the ODUk CTP output. The value false(2) means that
|
|
the selected GCC overhead bytes are set to zero at the ODUk CTP
|
|
output after the extraction of the COMMS data. This object has
|
|
no effect if the corresponding instance of jnxoptIfODUkTtpPresent
|
|
has the value true(1).
|
|
The value of this object may not be changed when
|
|
jnxoptIfGCC12RowStatus has the value active(1)."
|
|
::= { jnxoptIfGCC12ConfigEntry 3 }
|
|
|
|
|
|
jnxoptIfGCC12Application OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the application transported by the GCC12 entity.
|
|
Example applications are ECC, User data channel.
|
|
The value of this object may not be changed when
|
|
jnxoptIfGCC12RowStatus has the value active(1)."
|
|
::= { jnxoptIfGCC12ConfigEntry 4 }
|
|
|
|
|
|
jnxoptIfGCC12RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This columnar object is used for creating and deleting
|
|
a conceptual row of the jnxoptIfGCC12 config table. It is
|
|
used to model the addGCC12Access and removeGCC12Access
|
|
operations of an ODUk_CTP or ODUk_TTP for GCC12 access
|
|
control as defined in G.874.1. Setting RowStatus to
|
|
createAndGo or createAndWait implies addGCC12Access.
|
|
Setting RowStatus to destroy implies removeGCC12Access.
|
|
Successful addition/removal of the GCC12 access function
|
|
will result in updating the
|
|
jnxoptIfODUkPositionSeqCurrentSize variable and the
|
|
jnxoptIfODUkPositionSeqTable table of the associated
|
|
ODUk entry in the jnxoptIfODUkConfigTable."
|
|
::= { jnxoptIfGCC12ConfigEntry 5 }
|
|
|
|
|
|
-- the jnxoptIfODUkT group
|
|
-- This group handles the configuration information
|
|
-- for the ODUkT layers.
|
|
|
|
|
|
-- ODUkT config table
|
|
|
|
|
|
jnxoptIfODUkTConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfODUkTConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of ODUkT configuration information."
|
|
::= { jnxoptIfODUkT 1 }
|
|
|
|
|
|
jnxoptIfODUkTConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfODUkTConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains ODUkT configuration
|
|
information of an interface. Each instance must
|
|
correspond to an instance of jnxoptIfODUkConfigEntry.
|
|
Rows in this table are mutually exclusive with rows
|
|
in the ODUkT NIM config table -- in other words, this
|
|
row object may not be instantiated for a given pair
|
|
of ifIndex and TCM field values if a corresponding
|
|
instance of jnxoptIfODUkTNimConfigEntry already exists.
|
|
Instances of this conceptual row persist across agent
|
|
restarts. Except where noted otherwise, read-create
|
|
columns other than the status column may be modified
|
|
while the row is active."
|
|
INDEX { ifIndex, jnxoptIfODUkTTcmField, jnxoptIfODUkTCodirectional }
|
|
::= { jnxoptIfODUkTConfigTable 1 }
|
|
|
|
JnxoptIfODUkTConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfODUkTTcmField Unsigned32,
|
|
jnxoptIfODUkTCodirectional TruthValue,
|
|
jnxoptIfODUkTTraceIdentifierTransmitted JnxoptIfTxTI,
|
|
jnxoptIfODUkTDAPIExpected JnxoptIfExDAPI,
|
|
jnxoptIfODUkTSAPIExpected JnxoptIfExSAPI,
|
|
jnxoptIfODUkTTraceIdentifierAccepted JnxoptIfAcTI,
|
|
jnxoptIfODUkTTIMDetMode JnxoptIfTIMDetMode,
|
|
jnxoptIfODUkTTIMActEnabled TruthValue,
|
|
jnxoptIfODUkTDEGThr JnxoptIfDEGThr,
|
|
jnxoptIfODUkTDEGM JnxoptIfDEGM,
|
|
jnxoptIfODUkTSinkMode INTEGER,
|
|
jnxoptIfODUkTSinkLockSignalAdminState INTEGER,
|
|
jnxoptIfODUkTSourceLockSignalAdminState INTEGER,
|
|
jnxoptIfODUkTCurrentStatus BITS,
|
|
jnxoptIfODUkTRowStatus RowStatus
|
|
}
|
|
|
|
|
|
jnxoptIfODUkTTcmField OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..6)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the tandem connection monitoring
|
|
field of the ODUk OH. Valid values are
|
|
integers from 1 to 6."
|
|
::= { jnxoptIfODUkTConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfODUkTCodirectional OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the directionality of the ODUkT termination point with
|
|
respect to the associated ODUk CTP. The value true(1) means
|
|
that the sink part of the ODUkT TP extracts TCM data from the
|
|
signal at the input to the ODUk CTP sink and the source part
|
|
of the ODUkT TP inserts TCM data into the signal at the output
|
|
of the ODUk CTP source. The value false(2) means that the
|
|
sink part of the ODUkT TP extracts TCM data from the signal at
|
|
the output of the ODUk CTP source and the source part of the
|
|
ODUkT TP inserts TCM data into the signal at the input of the
|
|
ODUk CTP sink. This attribute may assume either value when
|
|
the corresponding instance of jnxoptIfODUkTtpPresent has the
|
|
value false(2). When the value of the corresponding instance
|
|
of jnxoptIfODUkTtpPresent is true(1) then the only value allowed
|
|
for this attribute is true(1)."
|
|
::= { jnxoptIfODUkTConfigEntry 2 }
|
|
|
|
|
|
jnxoptIfODUkTTraceIdentifierTransmitted OBJECT-TYPE
|
|
SYNTAX JnxoptIfTxTI
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trace identifier transmitted.
|
|
This object is applicable only to the following three cases.
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value false(2), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value true(1).
|
|
It must not be instantiated in rows for all other cases."
|
|
::= { jnxoptIfODUkTConfigEntry 3 }
|
|
|
|
|
|
jnxoptIfODUkTDAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExDAPI
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DAPI expected by the receiver.
|
|
This object is applicable only to the following three cases.
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases.
|
|
This object has no effect when jnxoptIfODUkTTIMDetMode has
|
|
the value off(1)."
|
|
::= { jnxoptIfODUkTConfigEntry 4 }
|
|
|
|
|
|
jnxoptIfODUkTSAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExSAPI
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SAPI expected by the receiver.
|
|
This object is applicable only to the following three cases.
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases.
|
|
This object has no effect when jnxoptIfODUkTTIMDetMode has
|
|
the value off(1)."
|
|
::= { jnxoptIfODUkTConfigEntry 5 }
|
|
|
|
|
|
jnxoptIfODUkTTraceIdentifierAccepted OBJECT-TYPE
|
|
SYNTAX JnxoptIfAcTI
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual trace identifier accepted.
|
|
This object is applicable only to the following three cases.
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases.
|
|
The value of this object is unspecified when
|
|
jnxoptIfODUkTCurrentStatus indicates a near-end defect
|
|
(i.e., oci(0), lck(1), ssf(5)) that prevents extraction
|
|
of the trace message."
|
|
::= { jnxoptIfODUkTConfigEntry 6 }
|
|
|
|
|
|
jnxoptIfODUkTTIMDetMode OBJECT-TYPE
|
|
SYNTAX JnxoptIfTIMDetMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of the Trace Identifier Mismatch (TIM)
|
|
Detection function.
|
|
This object is applicable only to the following three cases.
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases.
|
|
The default value of this object is off(1)."
|
|
::= { jnxoptIfODUkTConfigEntry 7 }
|
|
|
|
|
|
jnxoptIfODUkTTIMActEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Trace Identifier Mismatch (TIM)
|
|
Consequent Action function is enabled.
|
|
This object is applicable only to the following three cases.
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases.
|
|
This object has no effect when jnxoptIfODUkTTIMDetMode has
|
|
the value off(1).
|
|
The default value of this object is false(2)."
|
|
::= { jnxoptIfODUkTConfigEntry 8 }
|
|
|
|
|
|
jnxoptIfODUkTDEGThr OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGThr
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a performance
|
|
monitoring (PM) Second to be bad. A PM Second is declared bad if
|
|
the percentage of detected errored blocks in that second is
|
|
greater than or equal to jnxoptIfODUkTDEGThr.
|
|
This object is applicable only to the following three cases.
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases.
|
|
The default value of this object is Severely Errored Second
|
|
(SES) Estimator (See ITU-T G.7710)."
|
|
::= { jnxoptIfODUkTConfigEntry 9 }
|
|
|
|
|
|
jnxoptIfODUkTDEGM OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGM
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a Degraded Signal
|
|
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTDEGM
|
|
consecutive bad PM Seconds are detected.
|
|
This object is applicable only to the following three cases.
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases.
|
|
The default value of this object is 7 (See ITU-T G.7710)."
|
|
::= { jnxoptIfODUkTConfigEntry 10 }
|
|
|
|
|
|
jnxoptIfODUkTSinkMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operational (1),
|
|
monitor (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies the TCM mode at the entity.
|
|
The value operational(1) means that TCM Overhead (TCMOH)
|
|
processes (see ITU-T G.798) shall be
|
|
performed and consequent actions for AIS, Trail
|
|
Signal Fail (TSF), Trail Signal Degraded (TSD) shall be
|
|
initiated in case of defects.
|
|
The value monitor(2) means that TCMOH processes shall be
|
|
performed but consequent actions for AIS, Trail
|
|
Server Failure (TSF), Trail Server Degraded (TSD) shall _not_ be
|
|
initiated in case of defects.
|
|
This object is applicable only when the value of
|
|
jnxoptIfODUkTtpPresent is false(2) and also either one of the
|
|
following three cases holds:
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases."
|
|
::= { jnxoptIfODUkTConfigEntry 11 }
|
|
|
|
|
|
jnxoptIfODUkTSinkLockSignalAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
locked(1),
|
|
normal(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides the capability to provision the LOCK signal, which
|
|
is one of the ODUk maintenance signals, at the ODUKT sink. When
|
|
a Tandem Connection endpoint is set to admin state locked,
|
|
it inserts the ODUk-LCK signal in the sink direction.
|
|
This object is applicable only when the value of
|
|
jnxoptIfODUkTtpPresent is false(2) and also either one of the
|
|
following three cases holds:
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases."
|
|
::= { jnxoptIfODUkTConfigEntry 12 }
|
|
|
|
|
|
jnxoptIfODUkTSourceLockSignalAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
locked(1),
|
|
normal(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides the capability to provision the LOCK signal, which
|
|
is one of the ODUk maintenance signals, at the source.
|
|
When a Tandem Connection endpoint is set to admin state
|
|
locked, it inserts the ODUk-LCK signal in the source
|
|
direction.
|
|
This object is applicable only when either one of the
|
|
following three cases holds:
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value false(2), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value true(1).
|
|
It must not be instantiated in rows for all other cases."
|
|
::= { jnxoptIfODUkTConfigEntry 13 }
|
|
|
|
|
|
jnxoptIfODUkTCurrentStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
oci(0),
|
|
lck(1),
|
|
tim(2),
|
|
deg(3),
|
|
bdi(4),
|
|
ssf(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the defect condition of the entity, if any.
|
|
This object is applicable only when either one of the
|
|
following three cases holds:
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It must not be instantiated in rows for all other cases."
|
|
::= { jnxoptIfODUkTConfigEntry 14 }
|
|
|
|
|
|
jnxoptIfODUkTRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This columnar object is used for creating and deleting a
|
|
conceptual row of the jnxoptIfODUkT config table.
|
|
It is used to model the addTCM and removeTCM operations of an
|
|
ODUk_CTP or ODUk_TTP for Tandem connection monitoring as defined
|
|
in ITU-T G.874.1.
|
|
Setting RowStatus to createAndGo or createAndWait implies addTCM.
|
|
Setting RowStatus to destroy implies removeTCM.
|
|
Successful addition/removal of TCM will result in updating the
|
|
jnxoptIfODUkTcmFieldsInUse and jnxoptIfODUkPositionSeqCurrentSize
|
|
variables and the jnxoptIfODUkPositionSeqTable table of the
|
|
associated ODUk entry in the jnxoptIfODUkConfigTable."
|
|
::= { jnxoptIfODUkTConfigEntry 15 }
|
|
|
|
|
|
-- ODUkT Non-intrusive monitoring (Nim) config table
|
|
|
|
|
|
jnxoptIfODUkTNimConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxoptIfODUkTNimConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of ODUkTNim configuration information."
|
|
::= { jnxoptIfODUkT 2 }
|
|
|
|
|
|
jnxoptIfODUkTNimConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxoptIfODUkTNimConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row that contains ODUkTNim configuration
|
|
information of an interface. Each instance must
|
|
correspond to an instance of jnxoptIfODUkConfigEntry.
|
|
Rows in this table are mutually exclusive with rows
|
|
in the ODUkT config table -- in other words, this
|
|
row object may not be instantiated for a given pair
|
|
of ifIndex and TCM field values if a corresponding
|
|
instance of jnxoptIfODUkTConfigEntry already exists.
|
|
Instances of this conceptual row persist across
|
|
agent restarts, and read-create columns other
|
|
than the status column may be modified while the
|
|
row is active."
|
|
INDEX {ifIndex, jnxoptIfODUkTNimTcmField, jnxoptIfODUkTNimDirectionality}
|
|
::= { jnxoptIfODUkTNimConfigTable 1 }
|
|
|
|
JnxoptIfODUkTNimConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxoptIfODUkTNimTcmField Unsigned32,
|
|
jnxoptIfODUkTNimDirectionality JnxoptIfSinkOrSource,
|
|
jnxoptIfODUkTNimDAPIExpected JnxoptIfExDAPI,
|
|
jnxoptIfODUkTNimSAPIExpected JnxoptIfExSAPI,
|
|
jnxoptIfODUkTNimTraceIdentifierAccepted JnxoptIfAcTI,
|
|
jnxoptIfODUkTNimTIMDetMode JnxoptIfTIMDetMode,
|
|
jnxoptIfODUkTNimTIMActEnabled TruthValue,
|
|
jnxoptIfODUkTNimDEGThr JnxoptIfDEGThr,
|
|
jnxoptIfODUkTNimDEGM JnxoptIfDEGM,
|
|
jnxoptIfODUkTNimCurrentStatus BITS,
|
|
jnxoptIfODUkTNimRowStatus RowStatus
|
|
}
|
|
|
|
|
|
jnxoptIfODUkTNimTcmField OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..6)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the tandem connection monitoring
|
|
field of the ODUk OH on which non-intrusive monitoring
|
|
is performed. Valid values are
|
|
integers from 1 to 6."
|
|
::= { jnxoptIfODUkTNimConfigEntry 1 }
|
|
|
|
|
|
jnxoptIfODUkTNimDirectionality OBJECT-TYPE
|
|
SYNTAX JnxoptIfSinkOrSource
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the monitor point for the ODUk TCM non-intrusive
|
|
monitoring function. The value source(2) is not allowed
|
|
if the corresponding instance of jnxoptIfODUkDirectionality
|
|
has the value sink(1), and the value sink(1) is not allowed
|
|
if the corresponding instance of jnxoptIfODUkDirectionality
|
|
has the value source(2). Either the value sink(1) or
|
|
source(2) is allowed if the corresponding instance of
|
|
jnxoptIfODUkDirectionality has the value bidirectional(3).
|
|
The value sink(1) means monitoring at the sink direction
|
|
TCM signal of the ODUk CTP.
|
|
The value source(2) means monitoring at the source direction
|
|
path signal of the ODUk CTP."
|
|
::= { jnxoptIfODUkTNimConfigEntry 2 }
|
|
|
|
|
|
jnxoptIfODUkTNimDAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExDAPI
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DAPI expected by the receiver.
|
|
This object has no effect if jnxoptIfODUkTNimTIMDetMode has
|
|
the value off(1) or sapi(3)."
|
|
::= { jnxoptIfODUkTNimConfigEntry 3 }
|
|
|
|
|
|
jnxoptIfODUkTNimSAPIExpected OBJECT-TYPE
|
|
SYNTAX JnxoptIfExSAPI
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SAPI expected by the receiver.
|
|
This object has no effect if jnxoptIfODUkTNimTIMDetMode has
|
|
the value off(1) or dapi(2)."
|
|
::= { jnxoptIfODUkTNimConfigEntry 4 }
|
|
|
|
|
|
jnxoptIfODUkTNimTraceIdentifierAccepted OBJECT-TYPE
|
|
SYNTAX JnxoptIfAcTI
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual trace identifier accepted. The value of
|
|
this object is unspecified if jnxoptIfODUkTNimCurrentStatus
|
|
has any of the bit positions oci(0), lck(1), or ssf(5)
|
|
set or if jnxoptIfODUkTNimRowStatus has any value other
|
|
than active(1)."
|
|
::= { jnxoptIfODUkTNimConfigEntry 5 }
|
|
|
|
|
|
jnxoptIfODUkTNimTIMDetMode OBJECT-TYPE
|
|
SYNTAX JnxoptIfTIMDetMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of the Trace Identifier Mismatch (TIM)
|
|
Detection function."
|
|
::= { jnxoptIfODUkTNimConfigEntry 6 }
|
|
|
|
|
|
jnxoptIfODUkTNimTIMActEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Trace Identifier Mismatch (TIM)
|
|
Consequent Action function is enabled."
|
|
::= { jnxoptIfODUkTNimConfigEntry 7 }
|
|
|
|
|
|
jnxoptIfODUkTNimDEGThr OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGThr
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a performance
|
|
monitoring (PM) Second to be bad. A PM Second is declared bad if
|
|
the percentage of detected errored blocks in that second is
|
|
greater than or equal to jnxoptIfODUkTNimDEGThr."
|
|
::= { jnxoptIfODUkTNimConfigEntry 8 }
|
|
|
|
|
|
jnxoptIfODUkTNimDEGM OBJECT-TYPE
|
|
SYNTAX JnxoptIfDEGM
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold level for declaring a Degraded Signal
|
|
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTNimDEGM
|
|
consecutive bad PM Seconds are detected."
|
|
::= { jnxoptIfODUkTNimConfigEntry 9 }
|
|
|
|
|
|
jnxoptIfODUkTNimCurrentStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
oci(0),
|
|
lck(1),
|
|
tim(2),
|
|
deg(3),
|
|
bdi(4),
|
|
ssf(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the defect condition of the entity, if any.
|
|
The value of this object is unspecified if
|
|
jnxoptIfODUkTNimRowStatus has any value other than
|
|
active(1)."
|
|
::= { jnxoptIfODUkTNimConfigEntry 10 }
|
|
|
|
|
|
jnxoptIfODUkTNimRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This columnar object is used for creating and deleting a
|
|
conceptual row of the jnxoptIfODUkTNim config table.
|
|
It is used to model the addTCM and removeTCM operations of an
|
|
ODUk_CTP or ODUk_TTP for non-intrusive Tandem connection
|
|
monitoring as defined in ITU-T G.874.1.
|
|
Setting RowStatus to createAndGo or createAndWait implies addTCM.
|
|
Setting RowStatus to destroy implies removeTCM.
|
|
Successful addition/removal of Nim TCM will result in updating
|
|
the jnxoptIfODUkPositionSeqCurrentSize variable and the
|
|
jnxoptIfODUkPositionSeqTable table of the associated ODUk entry
|
|
in the jnxoptIfODUkConfigTable."
|
|
::= { jnxoptIfODUkTNimConfigEntry 11 }
|
|
|
|
|
|
-- units of conformance
|
|
|
|
|
|
jnxoptIfOTMnGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTMnOrder,
|
|
jnxoptIfOTMnReduced,
|
|
jnxoptIfOTMnBitRates,
|
|
jnxoptIfOTMnInterfaceType,
|
|
jnxoptIfOTMnTcmMax,
|
|
jnxoptIfOTMnOpticalReach
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of OTMn structure information objects."
|
|
::= { jnxoptIfGroups 1 }
|
|
|
|
|
|
jnxoptIfPerfMonGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfPerfMonCurrentTimeElapsed,
|
|
jnxoptIfPerfMonCurDayTimeElapsed,
|
|
jnxoptIfPerfMonIntervalNumIntervals,
|
|
jnxoptIfPerfMonIntervalNumInvalidIntervals
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of performance monitoring interval objects."
|
|
::= { jnxoptIfGroups 2 }
|
|
|
|
|
|
jnxoptIfOTSnCommonGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnDirectionality
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all OTSn interfaces."
|
|
::= { jnxoptIfGroups 3 }
|
|
|
|
|
|
jnxoptIfOTSnSourceGroupFull OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnTraceIdentifierTransmitted
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to full-functionality/IaDI OTSn
|
|
interfaces that support source functions."
|
|
::= { jnxoptIfGroups 4 }
|
|
|
|
|
|
jnxoptIfOTSnAPRStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnAprStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects applicable to
|
|
OTSn interfaces that support Automatic
|
|
Power Reduction functions."
|
|
::= { jnxoptIfGroups 5 }
|
|
|
|
jnxoptIfOTSnAPRControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnAprControl
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects applicable to
|
|
OTSn interfaces that provide Automatic
|
|
Power Reduction control functions."
|
|
::= { jnxoptIfGroups 6 }
|
|
|
|
jnxoptIfOTSnSinkGroupBasic OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnCurrentStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all OTSn interfaces that
|
|
support sink functions."
|
|
::= { jnxoptIfGroups 7 }
|
|
|
|
jnxoptIfOTSnSinkGroupFull OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnDAPIExpected,
|
|
jnxoptIfOTSnSAPIExpected,
|
|
jnxoptIfOTSnTraceIdentifierAccepted,
|
|
jnxoptIfOTSnTIMDetMode,
|
|
jnxoptIfOTSnTIMActEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to full-functionality/IaDI OTSn
|
|
interfaces that support sink functions."
|
|
::= { jnxoptIfGroups 8 }
|
|
|
|
jnxoptIfOTSnSinkPreOtnPMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnSinkCurrentSuspectedFlag,
|
|
jnxoptIfOTSnSinkCurrentInputPower,
|
|
jnxoptIfOTSnSinkCurrentLowInputPower,
|
|
jnxoptIfOTSnSinkCurrentHighInputPower,
|
|
jnxoptIfOTSnSinkCurrentOutputPower,
|
|
jnxoptIfOTSnSinkCurrentLowOutputPower,
|
|
jnxoptIfOTSnSinkCurrentHighOutputPower,
|
|
jnxoptIfOTSnSinkIntervalSuspectedFlag,
|
|
jnxoptIfOTSnSinkIntervalLastInputPower,
|
|
jnxoptIfOTSnSinkIntervalLowInputPower,
|
|
jnxoptIfOTSnSinkIntervalHighInputPower,
|
|
jnxoptIfOTSnSinkIntervalLastOutputPower,
|
|
jnxoptIfOTSnSinkIntervalLowOutputPower,
|
|
jnxoptIfOTSnSinkIntervalHighOutputPower,
|
|
jnxoptIfOTSnSinkCurDaySuspectedFlag,
|
|
jnxoptIfOTSnSinkCurDayLowInputPower,
|
|
jnxoptIfOTSnSinkCurDayHighInputPower,
|
|
jnxoptIfOTSnSinkCurDayLowOutputPower,
|
|
jnxoptIfOTSnSinkCurDayHighOutputPower,
|
|
jnxoptIfOTSnSinkPrevDaySuspectedFlag,
|
|
jnxoptIfOTSnSinkPrevDayLastInputPower,
|
|
jnxoptIfOTSnSinkPrevDayLowInputPower,
|
|
jnxoptIfOTSnSinkPrevDayHighInputPower,
|
|
jnxoptIfOTSnSinkPrevDayLastOutputPower,
|
|
jnxoptIfOTSnSinkPrevDayLowOutputPower,
|
|
jnxoptIfOTSnSinkPrevDayHighOutputPower
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
objects applicable to OTSn interfaces that
|
|
support sink functions."
|
|
::= { jnxoptIfGroups 9 }
|
|
|
|
|
|
jnxoptIfOTSnSinkPreOtnPMThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnSinkCurrentLowerInputPowerThreshold,
|
|
jnxoptIfOTSnSinkCurrentUpperInputPowerThreshold,
|
|
jnxoptIfOTSnSinkCurrentLowerOutputPowerThreshold,
|
|
jnxoptIfOTSnSinkCurrentUpperOutputPowerThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
threshold objects applicable to OTSn interfaces
|
|
that support sink functions."
|
|
::= { jnxoptIfGroups 10 }
|
|
|
|
|
|
jnxoptIfOTSnSourcePreOtnPMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnSrcCurrentSuspectedFlag,
|
|
jnxoptIfOTSnSrcCurrentOutputPower,
|
|
jnxoptIfOTSnSrcCurrentLowOutputPower,
|
|
jnxoptIfOTSnSrcCurrentHighOutputPower,
|
|
jnxoptIfOTSnSrcCurrentInputPower,
|
|
jnxoptIfOTSnSrcCurrentLowInputPower,
|
|
jnxoptIfOTSnSrcCurrentHighInputPower,
|
|
jnxoptIfOTSnSrcIntervalSuspectedFlag,
|
|
jnxoptIfOTSnSrcIntervalLastOutputPower,
|
|
jnxoptIfOTSnSrcIntervalLowOutputPower,
|
|
jnxoptIfOTSnSrcIntervalHighOutputPower,
|
|
jnxoptIfOTSnSrcIntervalLastInputPower,
|
|
jnxoptIfOTSnSrcIntervalLowInputPower,
|
|
jnxoptIfOTSnSrcIntervalHighInputPower,
|
|
jnxoptIfOTSnSrcCurDaySuspectedFlag,
|
|
jnxoptIfOTSnSrcCurDayLowOutputPower,
|
|
jnxoptIfOTSnSrcCurDayHighOutputPower,
|
|
jnxoptIfOTSnSrcCurDayLowInputPower,
|
|
jnxoptIfOTSnSrcCurDayHighInputPower,
|
|
jnxoptIfOTSnSrcPrevDaySuspectedFlag,
|
|
jnxoptIfOTSnSrcPrevDayLastOutputPower,
|
|
jnxoptIfOTSnSrcPrevDayLowOutputPower,
|
|
jnxoptIfOTSnSrcPrevDayHighOutputPower,
|
|
jnxoptIfOTSnSrcPrevDayLastInputPower,
|
|
jnxoptIfOTSnSrcPrevDayLowInputPower,
|
|
jnxoptIfOTSnSrcPrevDayHighInputPower
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
objects applicable to OTSn interfaces that
|
|
support source functions."
|
|
::= { jnxoptIfGroups 11 }
|
|
|
|
|
|
jnxoptIfOTSnSourcePreOtnPMThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTSnSrcCurrentLowerOutputPowerThreshold,
|
|
jnxoptIfOTSnSrcCurrentUpperOutputPowerThreshold,
|
|
jnxoptIfOTSnSrcCurrentLowerInputPowerThreshold,
|
|
jnxoptIfOTSnSrcCurrentUpperInputPowerThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
threshold objects applicable to OTSn interfaces
|
|
that support source functions."
|
|
::= { jnxoptIfGroups 12 }
|
|
|
|
|
|
jnxoptIfOMSnCommonGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOMSnDirectionality
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all OMSn interfaces."
|
|
::= { jnxoptIfGroups 13 }
|
|
|
|
|
|
jnxoptIfOMSnSinkGroupBasic OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOMSnCurrentStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all OMSn interfaces that
|
|
support sink functions."
|
|
::= { jnxoptIfGroups 14 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPreOtnPMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOMSnSinkCurrentSuspectedFlag,
|
|
jnxoptIfOMSnSinkCurrentAggregatedInputPower,
|
|
jnxoptIfOMSnSinkCurrentLowAggregatedInputPower,
|
|
jnxoptIfOMSnSinkCurrentHighAggregatedInputPower,
|
|
jnxoptIfOMSnSinkCurrentOutputPower,
|
|
jnxoptIfOMSnSinkCurrentLowOutputPower,
|
|
jnxoptIfOMSnSinkCurrentHighOutputPower,
|
|
jnxoptIfOMSnSinkIntervalSuspectedFlag,
|
|
jnxoptIfOMSnSinkIntervalLastAggregatedInputPower,
|
|
jnxoptIfOMSnSinkIntervalLowAggregatedInputPower,
|
|
jnxoptIfOMSnSinkIntervalHighAggregatedInputPower,
|
|
jnxoptIfOMSnSinkIntervalLastOutputPower,
|
|
jnxoptIfOMSnSinkIntervalLowOutputPower,
|
|
jnxoptIfOMSnSinkIntervalHighOutputPower,
|
|
jnxoptIfOMSnSinkCurDaySuspectedFlag,
|
|
jnxoptIfOMSnSinkCurDayLowAggregatedInputPower,
|
|
jnxoptIfOMSnSinkCurDayHighAggregatedInputPower,
|
|
jnxoptIfOMSnSinkCurDayLowOutputPower,
|
|
jnxoptIfOMSnSinkCurDayHighOutputPower,
|
|
jnxoptIfOMSnSinkPrevDaySuspectedFlag,
|
|
jnxoptIfOMSnSinkPrevDayLastAggregatedInputPower,
|
|
jnxoptIfOMSnSinkPrevDayLowAggregatedInputPower,
|
|
jnxoptIfOMSnSinkPrevDayHighAggregatedInputPower,
|
|
jnxoptIfOMSnSinkPrevDayLastOutputPower,
|
|
jnxoptIfOMSnSinkPrevDayLowOutputPower,
|
|
jnxoptIfOMSnSinkPrevDayHighOutputPower
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
objects applicable to OMSn interfaces that
|
|
support sink functions."
|
|
::= { jnxoptIfGroups 15 }
|
|
|
|
|
|
jnxoptIfOMSnSinkPreOtnPMThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOMSnSinkCurrentLowerInputPowerThreshold,
|
|
jnxoptIfOMSnSinkCurrentUpperInputPowerThreshold,
|
|
jnxoptIfOMSnSinkCurrentLowerOutputPowerThreshold,
|
|
jnxoptIfOMSnSinkCurrentUpperOutputPowerThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
threshold objects applicable to OMSn interfaces
|
|
that support sink functions."
|
|
::= { jnxoptIfGroups 16 }
|
|
|
|
|
|
jnxoptIfOMSnSourcePreOtnPMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOMSnSrcCurrentSuspectedFlag,
|
|
jnxoptIfOMSnSrcCurrentOutputPower,
|
|
jnxoptIfOMSnSrcCurrentLowOutputPower,
|
|
jnxoptIfOMSnSrcCurrentHighOutputPower,
|
|
jnxoptIfOMSnSrcCurrentAggregatedInputPower,
|
|
jnxoptIfOMSnSrcCurrentLowAggregatedInputPower,
|
|
jnxoptIfOMSnSrcCurrentHighAggregatedInputPower,
|
|
jnxoptIfOMSnSrcIntervalSuspectedFlag,
|
|
jnxoptIfOMSnSrcIntervalLastOutputPower,
|
|
jnxoptIfOMSnSrcIntervalLowOutputPower,
|
|
jnxoptIfOMSnSrcIntervalHighOutputPower,
|
|
jnxoptIfOMSnSrcIntervalLastAggregatedInputPower,
|
|
jnxoptIfOMSnSrcIntervalLowAggregatedInputPower,
|
|
jnxoptIfOMSnSrcIntervalHighAggregatedInputPower,
|
|
jnxoptIfOMSnSrcCurDaySuspectedFlag,
|
|
jnxoptIfOMSnSrcCurDayLowOutputPower,
|
|
jnxoptIfOMSnSrcCurDayHighOutputPower,
|
|
jnxoptIfOMSnSrcCurDayLowAggregatedInputPower,
|
|
jnxoptIfOMSnSrcCurDayHighAggregatedInputPower,
|
|
jnxoptIfOMSnSrcPrevDaySuspectedFlag,
|
|
jnxoptIfOMSnSrcPrevDayLastOutputPower,
|
|
jnxoptIfOMSnSrcPrevDayLowOutputPower,
|
|
jnxoptIfOMSnSrcPrevDayHighOutputPower,
|
|
jnxoptIfOMSnSrcPrevDayLastAggregatedInputPower,
|
|
jnxoptIfOMSnSrcPrevDayLowAggregatedInputPower,
|
|
jnxoptIfOMSnSrcPrevDayHighAggregatedInputPower
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
objects applicable to OMSn interfaces that
|
|
support source functions."
|
|
::= { jnxoptIfGroups 17 }
|
|
|
|
|
|
jnxoptIfOMSnSourcePreOtnPMThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOMSnSrcCurrentLowerOutputPowerThreshold,
|
|
jnxoptIfOMSnSrcCurrentUpperOutputPowerThreshold,
|
|
jnxoptIfOMSnSrcCurrentLowerInputPowerThreshold,
|
|
jnxoptIfOMSnSrcCurrentUpperInputPowerThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
threshold objects applicable to OMSn interfaces that
|
|
that support source functions."
|
|
::= { jnxoptIfGroups 18 }
|
|
|
|
|
|
jnxoptIfOChGroupCommonGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChGroupDirectionality
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all OChGroup interfaces."
|
|
::= { jnxoptIfGroups 19 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPreOtnPMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChGroupSinkCurrentSuspectedFlag,
|
|
jnxoptIfOChGroupSinkCurrentAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkCurrentLowAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkCurrentHighAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkCurrentOutputPower,
|
|
jnxoptIfOChGroupSinkCurrentLowOutputPower,
|
|
jnxoptIfOChGroupSinkCurrentHighOutputPower,
|
|
jnxoptIfOChGroupSinkIntervalSuspectedFlag,
|
|
jnxoptIfOChGroupSinkIntervalLastAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkIntervalLowAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkIntervalHighAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkIntervalLastOutputPower,
|
|
jnxoptIfOChGroupSinkIntervalLowOutputPower,
|
|
jnxoptIfOChGroupSinkIntervalHighOutputPower,
|
|
jnxoptIfOChGroupSinkCurDaySuspectedFlag,
|
|
jnxoptIfOChGroupSinkCurDayLowAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkCurDayHighAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkCurDayLowOutputPower,
|
|
jnxoptIfOChGroupSinkCurDayHighOutputPower,
|
|
jnxoptIfOChGroupSinkPrevDaySuspectedFlag,
|
|
jnxoptIfOChGroupSinkPrevDayLastAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkPrevDayLowAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkPrevDayHighAggregatedInputPower,
|
|
jnxoptIfOChGroupSinkPrevDayLastOutputPower,
|
|
jnxoptIfOChGroupSinkPrevDayLowOutputPower,
|
|
jnxoptIfOChGroupSinkPrevDayHighOutputPower
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
objects applicable to OChGroup interfaces that
|
|
support sink functions."
|
|
::= { jnxoptIfGroups 20 }
|
|
|
|
|
|
jnxoptIfOChGroupSinkPreOtnPMThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChGroupSinkCurrentLowerInputPowerThreshold,
|
|
jnxoptIfOChGroupSinkCurrentUpperInputPowerThreshold,
|
|
jnxoptIfOChGroupSinkCurrentLowerOutputPowerThreshold,
|
|
jnxoptIfOChGroupSinkCurrentUpperOutputPowerThreshold
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
threshold objects applicable to OChGroup interfaces
|
|
that support sink functions."
|
|
::= { jnxoptIfGroups 21 }
|
|
|
|
|
|
jnxoptIfOChGroupSourcePreOtnPMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChGroupSrcCurrentSuspectedFlag,
|
|
jnxoptIfOChGroupSrcCurrentOutputPower,
|
|
jnxoptIfOChGroupSrcCurrentLowOutputPower,
|
|
jnxoptIfOChGroupSrcCurrentHighOutputPower,
|
|
jnxoptIfOChGroupSrcCurrentAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcCurrentLowAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcCurrentHighAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcIntervalSuspectedFlag,
|
|
jnxoptIfOChGroupSrcIntervalLastOutputPower,
|
|
jnxoptIfOChGroupSrcIntervalLowOutputPower,
|
|
jnxoptIfOChGroupSrcIntervalHighOutputPower,
|
|
jnxoptIfOChGroupSrcIntervalLastAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcIntervalLowAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcIntervalHighAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcCurDaySuspectedFlag,
|
|
jnxoptIfOChGroupSrcCurDayLowOutputPower,
|
|
jnxoptIfOChGroupSrcCurDayHighOutputPower,
|
|
jnxoptIfOChGroupSrcCurDayLowAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcCurDayHighAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcPrevDaySuspectedFlag,
|
|
jnxoptIfOChGroupSrcPrevDayLastOutputPower,
|
|
jnxoptIfOChGroupSrcPrevDayLowOutputPower,
|
|
jnxoptIfOChGroupSrcPrevDayHighOutputPower,
|
|
jnxoptIfOChGroupSrcPrevDayLastAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcPrevDayLowAggregatedInputPower,
|
|
jnxoptIfOChGroupSrcPrevDayHighAggregatedInputPower
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
objects applicable to OChGroup interfaces that
|
|
support source functions."
|
|
::= { jnxoptIfGroups 22 }
|
|
|
|
|
|
jnxoptIfOChGroupSourcePreOtnPMThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChGroupSrcCurrentLowerOutputPowerThreshold,
|
|
jnxoptIfOChGroupSrcCurrentUpperOutputPowerThreshold,
|
|
jnxoptIfOChGroupSrcCurrentLowerInputPowerThreshold,
|
|
jnxoptIfOChGroupSrcCurrentUpperInputPowerThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
threshold objects applicable to OChGroup interfaces that
|
|
that support source functions."
|
|
::= { jnxoptIfGroups 23 }
|
|
|
|
|
|
jnxoptIfOChCommonGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChDirectionality
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all OCh interfaces."
|
|
::= { jnxoptIfGroups 24 }
|
|
|
|
|
|
|
|
jnxoptIfOChSinkGroupBasic OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChCurrentStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all OCh interfaces that
|
|
support sink functions."
|
|
::= { jnxoptIfGroups 25 }
|
|
|
|
|
|
jnxoptIfOChSinkPreOtnPMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChSinkCurrentSuspectedFlag,
|
|
jnxoptIfOChSinkCurrentInputPower,
|
|
jnxoptIfOChSinkCurrentLowInputPower,
|
|
jnxoptIfOChSinkCurrentHighInputPower,
|
|
jnxoptIfOChSinkIntervalSuspectedFlag,
|
|
jnxoptIfOChSinkIntervalLastInputPower,
|
|
jnxoptIfOChSinkIntervalLowInputPower,
|
|
jnxoptIfOChSinkIntervalHighInputPower,
|
|
jnxoptIfOChSinkCurDaySuspectedFlag,
|
|
jnxoptIfOChSinkCurDayLowInputPower,
|
|
jnxoptIfOChSinkCurDayHighInputPower,
|
|
jnxoptIfOChSinkPrevDaySuspectedFlag,
|
|
jnxoptIfOChSinkPrevDayLastInputPower,
|
|
jnxoptIfOChSinkPrevDayLowInputPower,
|
|
jnxoptIfOChSinkPrevDayHighInputPower
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
objects applicable to OCh interfaces that
|
|
support sink functions."
|
|
::= { jnxoptIfGroups 26 }
|
|
|
|
|
|
jnxoptIfOChSinkPreOtnPMThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChSinkCurrentLowerInputPowerThreshold,
|
|
jnxoptIfOChSinkCurrentUpperInputPowerThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
threshold objects applicable to OCh interfaces
|
|
that support sink functions."
|
|
::= { jnxoptIfGroups 27 }
|
|
|
|
jnxoptIfOChSourcePreOtnPMGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChSrcCurrentSuspectedFlag,
|
|
jnxoptIfOChSrcCurrentOutputPower,
|
|
jnxoptIfOChSrcCurrentLowOutputPower,
|
|
jnxoptIfOChSrcCurrentHighOutputPower,
|
|
jnxoptIfOChSrcIntervalSuspectedFlag,
|
|
jnxoptIfOChSrcIntervalLastOutputPower,
|
|
jnxoptIfOChSrcIntervalLowOutputPower,
|
|
jnxoptIfOChSrcIntervalHighOutputPower,
|
|
jnxoptIfOChSrcCurDaySuspectedFlag,
|
|
jnxoptIfOChSrcCurDayLowOutputPower,
|
|
jnxoptIfOChSrcCurDayHighOutputPower,
|
|
jnxoptIfOChSrcPrevDaySuspectedFlag,
|
|
jnxoptIfOChSrcPrevDayLastOutputPower,
|
|
jnxoptIfOChSrcPrevDayLowOutputPower,
|
|
jnxoptIfOChSrcPrevDayHighOutputPower
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
objects applicable to OCh interfaces that
|
|
support source functions."
|
|
::= { jnxoptIfGroups 28 }
|
|
|
|
|
|
jnxoptIfOChSourcePreOtnPMThresholdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOChSrcCurrentLowerOutputPowerThreshold,
|
|
jnxoptIfOChSrcCurrentUpperOutputPowerThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pre-OTN performance monitoring
|
|
threshold objects applicable to OCh interfaces
|
|
that support source functions."
|
|
::= { jnxoptIfGroups 29 }
|
|
|
|
|
|
jnxoptIfOTUkCommonGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTUkDirectionality,
|
|
jnxoptIfOTUkBitRateK
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all OTUk interfaces."
|
|
::= { jnxoptIfGroups 30 }
|
|
|
|
|
|
|
|
jnxoptIfOTUkSourceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTUkTraceIdentifierTransmitted,
|
|
jnxoptIfOTUkSourceAdaptActive
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to OTUk interfaces that
|
|
support source functions."
|
|
::= { jnxoptIfGroups 31 }
|
|
|
|
|
|
jnxoptIfOTUkSinkGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfOTUkDAPIExpected,
|
|
jnxoptIfOTUkSAPIExpected,
|
|
jnxoptIfOTUkTraceIdentifierAccepted,
|
|
jnxoptIfOTUkTIMDetMode,
|
|
jnxoptIfOTUkTIMActEnabled,
|
|
jnxoptIfOTUkDEGThr,
|
|
jnxoptIfOTUkDEGM,
|
|
jnxoptIfOTUkSinkAdaptActive,
|
|
jnxoptIfOTUkSinkFECEnabled,
|
|
jnxoptIfOTUkCurrentStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to OTUk interfaces that
|
|
support sink functions."
|
|
::= { jnxoptIfGroups 32 }
|
|
|
|
|
|
jnxoptIfGCC0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfGCC0Application,
|
|
jnxoptIfGCC0RowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of GCC0 configuration objects."
|
|
::= { jnxoptIfGroups 33 }
|
|
|
|
|
|
jnxoptIfODUkGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkDirectionality,
|
|
jnxoptIfODUkBitRateK,
|
|
jnxoptIfODUkTcmFieldsInUse,
|
|
jnxoptIfODUkPositionSeqCurrentSize,
|
|
jnxoptIfODUkPositionSeqPosition,
|
|
jnxoptIfODUkPositionSeqPointer,
|
|
jnxoptIfODUkTtpPresent
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all ODUk interfaces."
|
|
::= { jnxoptIfGroups 34 }
|
|
|
|
|
|
jnxoptIfODUkTtpSourceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkTtpTraceIdentifierTransmitted
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all interfaces that support
|
|
ODUk trail termination source functions."
|
|
::= { jnxoptIfGroups 35 }
|
|
|
|
|
|
jnxoptIfODUkTtpSinkGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkTtpDAPIExpected,
|
|
jnxoptIfODUkTtpSAPIExpected,
|
|
jnxoptIfODUkTtpTraceIdentifierAccepted,
|
|
jnxoptIfODUkTtpTIMDetMode,
|
|
jnxoptIfODUkTtpTIMActEnabled,
|
|
jnxoptIfODUkTtpDEGThr,
|
|
jnxoptIfODUkTtpDEGM,
|
|
jnxoptIfODUkTtpCurrentStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of ODUk configuration objects
|
|
applicable to all interfaces that support
|
|
ODUk trail termination sink functions."
|
|
::= { jnxoptIfGroups 36 }
|
|
|
|
|
|
jnxoptIfODUkNimGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkNimDAPIExpected,
|
|
jnxoptIfODUkNimSAPIExpected,
|
|
jnxoptIfODUkNimTraceIdentifierAccepted,
|
|
jnxoptIfODUkNimTIMDetMode,
|
|
jnxoptIfODUkNimTIMActEnabled,
|
|
jnxoptIfODUkNimDEGThr,
|
|
jnxoptIfODUkNimDEGM,
|
|
jnxoptIfODUkNimCurrentStatus,
|
|
jnxoptIfODUkNimRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of ODUk Nim configuration objects."
|
|
::= { jnxoptIfGroups 37 }
|
|
|
|
jnxoptIfGCC12Group OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfGCC12GCCPassThrough,
|
|
jnxoptIfGCC12Application,
|
|
jnxoptIfGCC12RowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of GCC12 configuration objects."
|
|
::= { jnxoptIfGroups 38 }
|
|
|
|
jnxoptIfODUkTCommonGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkTRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all ODUkT instances."
|
|
::= { jnxoptIfGroups 39 }
|
|
|
|
jnxoptIfODUkTSourceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkTTraceIdentifierTransmitted,
|
|
jnxoptIfODUkTSourceLockSignalAdminState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all ODUkT instances
|
|
that provide source functions."
|
|
::= { jnxoptIfGroups 40 }
|
|
|
|
jnxoptIfODUkTSinkGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkTDAPIExpected,
|
|
jnxoptIfODUkTSAPIExpected,
|
|
jnxoptIfODUkTTraceIdentifierAccepted,
|
|
jnxoptIfODUkTTIMDetMode,
|
|
jnxoptIfODUkTTIMActEnabled,
|
|
jnxoptIfODUkTDEGThr,
|
|
jnxoptIfODUkTDEGM,
|
|
jnxoptIfODUkTCurrentStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to all ODUkT instances
|
|
that provide sink functions."
|
|
::= { jnxoptIfGroups 41 }
|
|
|
|
|
|
jnxoptIfODUkTSinkGroupCtp OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkTSinkMode,
|
|
jnxoptIfODUkTSinkLockSignalAdminState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of configuration objects
|
|
applicable to ODUkT instances not
|
|
colocated with an ODUk TTP that
|
|
provide sink functions."
|
|
::= { jnxoptIfGroups 42 }
|
|
|
|
|
|
jnxoptIfODUkTNimGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
jnxoptIfODUkTNimDAPIExpected,
|
|
jnxoptIfODUkTNimSAPIExpected,
|
|
jnxoptIfODUkTNimTraceIdentifierAccepted,
|
|
jnxoptIfODUkTNimTIMDetMode,
|
|
jnxoptIfODUkTNimTIMActEnabled,
|
|
jnxoptIfODUkTNimDEGThr,
|
|
jnxoptIfODUkTNimDEGM,
|
|
jnxoptIfODUkTNimCurrentStatus,
|
|
jnxoptIfODUkTNimRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of ODUkT Nim configuration objects."
|
|
::= { jnxoptIfGroups 43 }
|
|
|
|
|
|
-- compliance specifications
|
|
|
|
|
|
jnxoptIfOtnConfigCompl MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Implementation requirements for the OTN configuration
|
|
functions defined in this MIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
jnxoptIfOTMnGroup,
|
|
jnxoptIfOTSnCommonGroup
|
|
}
|
|
|
|
|
|
GROUP jnxoptIfOTSnSourceGroupFull
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(196) for which the corresponding
|
|
instance of jnxoptIfOTSnDirectionality has the value
|
|
source(2) or bidirectional(3), the corresponding
|
|
instance of jnxoptIfOTMnReduced has the value false(2),
|
|
and the corresponding instance of jnxoptIfOTMnInterfaceType
|
|
specifies an OTMn interface type of 'IaDI'."
|
|
|
|
|
|
GROUP jnxoptIfOTSnAPRStatusGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(196) that support Automatic Power
|
|
Reduction functions."
|
|
|
|
GROUP jnxoptIfOTSnAPRControlGroup
|
|
DESCRIPTION
|
|
"This group is optional, but is recommended for interfaces
|
|
of ifType opticalTransport(196) that provide Automatic
|
|
Power Reduction control functions."
|
|
|
|
|
|
GROUP jnxoptIfOTSnSinkGroupBasic
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(196) for which the corresponding
|
|
instance of jnxoptIfOTSnDirectionality has the value
|
|
sink(1) or bidirectional(3)."
|
|
|
|
GROUP jnxoptIfOTSnSinkGroupFull
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(196) for which the corresponding
|
|
instance of jnxoptIfOTSnDirectionality has the value
|
|
sink(1) or bidirectional(3), the corresponding
|
|
instance of jnxoptIfOTMnReduced has the value false(2),
|
|
and the corresponding instance of jnxoptIfOTMnInterfaceType
|
|
specifies an OTMn interface type of 'IaDI'."
|
|
|
|
|
|
GROUP jnxoptIfOMSnCommonGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(196) that support access to the OMS
|
|
overhead information within the OTN Supervisory Channel."
|
|
|
|
GROUP jnxoptIfOMSnSinkGroupBasic
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(196) that support access to the OMS Overhead
|
|
information within the OSC (OTN Supervisory Channel)
|
|
for which the corresponding
|
|
instance of jnxoptIfOMSnDirectionality has the value
|
|
sink(1) or bidirectional(3)."
|
|
|
|
|
|
GROUP jnxoptIfOChGroupCommonGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannelGroup(219)."
|
|
|
|
|
|
GROUP jnxoptIfOChCommonGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(195)."
|
|
|
|
|
|
GROUP jnxoptIfOChSinkGroupBasic
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) for which the corresponding
|
|
instance of jnxoptIfOChDirectionality has the value
|
|
sink(1) or bidirectional(3)."
|
|
|
|
|
|
GROUP jnxoptIfOTUkCommonGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support OTUk layer functions."
|
|
|
|
|
|
GROUP jnxoptIfOTUkSourceGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support OTUk layer functions
|
|
and for which the corresponding instance of
|
|
jnxoptIfOTUkDirectionality has the value source(2) or
|
|
bidirectional(3)."
|
|
|
|
|
|
GROUP jnxoptIfOTUkSinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support OTUk layer functions
|
|
and for which the corresponding instance of
|
|
jnxoptIfOTUkDirectionality has the value sink(1) or
|
|
bidirectional(3)."
|
|
|
|
GROUP jnxoptIfGCC0Group
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support GCC0 access functions.
|
|
It may be implemented only if the jnxoptIfOTUkCommonGroup
|
|
is also implemented."
|
|
|
|
|
|
GROUP jnxoptIfODUkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support ODUk layer functions."
|
|
|
|
|
|
GROUP jnxoptIfODUkTtpSourceGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) for which the corresponding
|
|
instance of jnxoptIfODUkTtpPresent has the value
|
|
true(1) and for which the corresponding instance of
|
|
jnxoptIfODUkDirectionality has the value source(2) or
|
|
bidirectional(3). It may be implemented only if the
|
|
jnxoptIfODUkGroup is also implemented."
|
|
|
|
|
|
GROUP jnxoptIfODUkTtpSinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) for which the corresponding
|
|
instance of jnxoptIfODUkTtpPresent has the value
|
|
true(1) and for which the corresponding instance of
|
|
jnxoptIfODUkDirectionality has the value sink(1) or
|
|
bidirectional(3). It may be implemented only if the
|
|
jnxoptIfODUkGroup is also implemented."
|
|
|
|
|
|
GROUP jnxoptIfODUkNimGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) for which the corresponding
|
|
instance of jnxoptIfODUkTtpPresent has the value
|
|
false(2). It may be implemented only if the
|
|
jnxoptIfODUkGroup is also implemented."
|
|
|
|
|
|
GROUP jnxoptIfGCC12Group
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support GCC12 access functions.
|
|
It may be implemented only if the jnxoptIfODUkGroup
|
|
is also implemented."
|
|
|
|
|
|
GROUP jnxoptIfODUkTCommonGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support intrusive
|
|
tandem connection monitoring. It may be implemented
|
|
only if the jnxoptIfODUkGroup is also implemented."
|
|
|
|
|
|
GROUP jnxoptIfODUkTSourceGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support intrusive
|
|
tandem connection monitoring and for which
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value false(2), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value true(1).
|
|
It may be implemented only if the jnxoptIfODUkGroup is
|
|
also implemented."
|
|
|
|
|
|
GROUP jnxoptIfODUkTSinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support intrusive
|
|
tandem connection monitoring and for which
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It may be implemented only if the jnxoptIfODUkGroup is
|
|
also implemented."
|
|
|
|
|
|
GROUP jnxoptIfODUkTSinkGroupCtp
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support intrusive
|
|
tandem connection monitoring and for which
|
|
jnxoptIfODUkTtpPresent is false(2) and
|
|
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
|
|
(ii) jnxoptIfODUkDirectionality has the value sink(1) and
|
|
jnxoptIfODUkTCodirectional has the value true(1), or
|
|
(iii) jnxoptIfODUkDirectionality has the value source(3) and
|
|
jnxoptIfODUkTCodirectional has the value false(2).
|
|
It may be implemented only if the jnxoptIfODUkGroup and
|
|
jnxoptIfODUkTSinkGroup are also implemented."
|
|
|
|
|
|
GROUP jnxoptIfODUkTNimGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support non-intrusive
|
|
tandem connection monitoring. It may be implemented
|
|
only if the jnxoptIfODUkGroup is also implemented."
|
|
::= { jnxoptIfCompl 1 }
|
|
|
|
|
|
jnxoptIfPreOtnPMCompl MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Implementation requirements for Pre-OTN performance
|
|
monitoring functions defined in this MIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
jnxoptIfPerfMonGroup
|
|
}
|
|
|
|
GROUP jnxoptIfOTSnSinkPreOtnPMGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(196) that support OTSn sink
|
|
functions (i.e., for which the corresponding instance
|
|
of jnxoptIfOTSnDirectionality -- if implemented -- has
|
|
the value sink(1) or bidirectional(3))."
|
|
|
|
|
|
GROUP jnxoptIfOTSnSinkPreOtnPMThresholdGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if and only if TCA notifications
|
|
are implemented. If the objects of this group are instantiated
|
|
then the implementation must also provide, in an
|
|
enterprise MIB, suitable TCA notification definitions and
|
|
notification control objects. Implementation of the
|
|
jnxoptIfOTSnSinkPreOtnPMGroup is a prerequisite for
|
|
implementing this group."
|
|
|
|
|
|
GROUP jnxoptIfOTSnSourcePreOtnPMGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalTransport(196) that support OTSn source
|
|
functions (i.e., for which the corresponding instance
|
|
of jnxoptIfOTSnDirectionality -- if implemented -- has
|
|
the value source(2) or bidirectional(3))."
|
|
|
|
|
|
GROUP jnxoptIfOTSnSourcePreOtnPMThresholdGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if and only if TCA notifications
|
|
are implemented. If the objects of this group are instantiated
|
|
then the implementation must also provide, in an
|
|
enterprise MIB, suitable TCA notification definitions and
|
|
notification control objects. Implementation of the
|
|
jnxoptIfOTSnSourcePreOtnPMGroup is a prerequisite for
|
|
implementing this group "
|
|
|
|
|
|
GROUP jnxoptIfOMSnSinkPreOtnPMGroup
|
|
DESCRIPTION
|
|
"This group is optional. It may be implemented by systems
|
|
with the necessary instrumentation on interfaces of ifType
|
|
opticalTransport(196) that support OMSn sink functions
|
|
(i.e., for which the corresponding instance of
|
|
jnxoptIfOMSnDirectionality -- if implemented -- has the value
|
|
sink(1) or bidirectional(3))."
|
|
|
|
|
|
GROUP jnxoptIfOMSnSinkPreOtnPMThresholdGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if and only if TCA notifications
|
|
are implemented. If the objects of this group are instantiated
|
|
then the implementation must also provide, in an
|
|
enterprise MIB, suitable TCA notification definitions and
|
|
notification control objects. Implementation of the
|
|
jnxoptIfOMSnSinkPreOtnPMGroup is a prerequisite for
|
|
implementing this group "
|
|
|
|
|
|
GROUP jnxoptIfOMSnSourcePreOtnPMGroup
|
|
DESCRIPTION
|
|
"This group is optional. It may be implemented by systems
|
|
with the necessary instrumentation on interfaces of ifType
|
|
opticalTransport(196) that support OMSn source functions
|
|
(i.e., for which the corresponding instance of
|
|
jnxoptIfOMSnDirectionality -- if implemented -- has the value
|
|
source(2) or bidirectional(3))."
|
|
|
|
|
|
GROUP jnxoptIfOMSnSourcePreOtnPMThresholdGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if and only if TCA notifications
|
|
are implemented. If the objects of this group are instantiated
|
|
then the implementation must also provide, in an
|
|
enterprise MIB, suitable TCA notification definitions and
|
|
notification control objects. Implementation of the
|
|
jnxoptIfOMSnSourcePreOtnPMGroup is a prerequisite for
|
|
implementing this group "
|
|
|
|
|
|
GROUP jnxoptIfOChGroupSinkPreOtnPMGroup
|
|
DESCRIPTION
|
|
"This group is optional. It may be implemented by systems
|
|
with the necessary instrumentation on interfaces of ifType
|
|
opticalChannelGroup(219) that support OChGroup sink functions
|
|
(i.e., for which the corresponding instance of
|
|
jnxoptIfOChGroupDirectionality -- if implemented -- has the value
|
|
sink(1) or bidirectional(3))."
|
|
|
|
|
|
GROUP jnxoptIfOChGroupSinkPreOtnPMThresholdGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if and only if TCA notifications
|
|
are implemented. If the objects of this group are instantiated
|
|
then the implementation must also provide, in an
|
|
enterprise MIB, suitable TCA notification definitions and
|
|
notification control objects. Implementation of the
|
|
jnxoptIfOChGroupSinkPreOtnPMGroup is a prerequisite for
|
|
implementing this group "
|
|
|
|
|
|
GROUP jnxoptIfOChGroupSourcePreOtnPMGroup
|
|
DESCRIPTION
|
|
"This group is optional. It may be implemented by systems
|
|
with the necessary instrumentation on interfaces of ifType
|
|
opticalChannelGroup(219) that support OChGroup source functions
|
|
(i.e., for which the corresponding instance of
|
|
jnxoptIfOChGroupDirectionality -- if implemented -- has the value
|
|
source(2) or bidirectional(3))."
|
|
|
|
|
|
GROUP jnxoptIfOChGroupSourcePreOtnPMThresholdGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if and only if TCA notifications
|
|
are implemented. If the objects of this group are instantiated
|
|
then the implementation must also provide, in an
|
|
enterprise MIB, suitable TCA notification definitions and
|
|
notification control objects. Implementation of the
|
|
jnxoptIfOChGroupSourcePreOtnPMGroup is a prerequisite for
|
|
implementing this group "
|
|
|
|
|
|
GROUP jnxoptIfOChSinkPreOtnPMGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support OCh sink functions
|
|
(i.e., for which the corresponding instance of
|
|
jnxoptIfOChDirectionality -- if implemented -- has the
|
|
value sink(1) or bidirectional(3))."
|
|
|
|
|
|
GROUP jnxoptIfOChSinkPreOtnPMThresholdGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if and only if TCA notifications
|
|
are implemented. If the objects of this group are instantiated
|
|
then the implementation must also provide, in an
|
|
enterprise MIB, suitable TCA notification definitions and
|
|
notification control objects. Implementation of the
|
|
jnxoptIfOChSinkPreOtnPMGroup is a prerequisite for
|
|
implementing this group "
|
|
|
|
|
|
GROUP jnxoptIfOChSourcePreOtnPMGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for interfaces of ifType
|
|
opticalChannel(195) that support OCh source functions
|
|
(i.e., for which the corresponding instance of
|
|
jnxoptIfOChDirectionality -- if implemented -- has the
|
|
value source(2) or bidirectional(3))."
|
|
|
|
|
|
GROUP jnxoptIfOChSourcePreOtnPMThresholdGroup
|
|
DESCRIPTION
|
|
"This group is mandatory if and only if TCA notifications
|
|
are implemented. If the objects of this group are instantiated
|
|
then the implementation must also provide, in an
|
|
enterprise MIB, suitable TCA notification definitions and
|
|
notification control objects. Implementation of the
|
|
jnxoptIfOChSourcePreOtnPMGroup is a prerequisite for
|
|
implementing this group "
|
|
::= { jnxoptIfCompl 2 }
|
|
|
|
|
|
END
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|