graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/inovonics/INOVONICS-MODEL650-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1631 lines
No EOL
44 KiB
Text
Executable file
Raw Permalink Blame History

-- INOVONICS MODEL 650 SMIV2 SPECIFICATION MIB
INOVONICS-MODEL650-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,OBJECT-TYPE,
NOTIFICATION-TYPE,enterprises,
Integer32,IpAddress FROM SNMPv2-SMI
TEXTUAL-CONVENTION,DisplayString FROM SNMPv2-TC;
model650 MODULE-IDENTITY
LAST-UPDATED "201602020000Z"
ORGANIZATION "Inovonics, Inc."
CONTACT-INFO
"www.inovonicsbroadcast.com"
DESCRIPTION
"The MIB for the Model 650 AARON FM Rebroadcast Receiver."
REVISION "201602020000Z"
DESCRIPTION
"Second MIB version. Entire MIB overhauled to add OID for every parameter."
::= { inovonicsBroadcast 650 }
inovonicsBroadcast OBJECT IDENTIFIER ::= { enterprises 42111 }
traps OBJECT IDENTIFIER ::= { model650 1 }
notifications OBJECT IDENTIFIER ::= { traps 0 }
product OBJECT IDENTIFIER ::= { model650 2 }
nowPlaying OBJECT IDENTIFIER ::= { model650 3 }
receptionTools OBJECT IDENTIFIER ::= { model650 4 }
bandwidthIF OBJECT IDENTIFIER ::= { receptionTools 1 }
stereoBlend OBJECT IDENTIFIER ::= { receptionTools 2 }
highBlend OBJECT IDENTIFIER ::= { receptionTools 3 }
bandBlend OBJECT IDENTIFIER ::= { receptionTools 4 }
highcut OBJECT IDENTIFIER ::= { receptionTools 5 }
rds OBJECT IDENTIFIER ::= { model650 5 }
alarms OBJECT IDENTIFIER ::= { model650 6 }
alarmStatus OBJECT IDENTIFIER ::= { alarms 1 }
audioLoss OBJECT IDENTIFIER ::= { alarms 2 }
lowSignal OBJECT IDENTIFIER ::= { alarms 3 }
rdsLoss OBJECT IDENTIFIER ::= { alarms 4 }
pilotLoss OBJECT IDENTIFIER ::= { alarms 5 }
audioFailover OBJECT IDENTIFIER ::= { alarms 6 }
stereoRegen OBJECT IDENTIFIER ::= { model650 7 }
regenPilot OBJECT IDENTIFIER ::= { stereoRegen 2 }
regenRDS OBJECT IDENTIFIER ::= { stereoRegen 3 }
setup OBJECT IDENTIFIER ::= { model650 8 }
outputs OBJECT IDENTIFIER ::= { setup 1 }
network OBJECT IDENTIFIER ::= { setup 2 }
dynDNS OBJECT IDENTIFIER ::= { setup 3 }
time OBJECT IDENTIFIER ::= { setup 4 }
snmp OBJECT IDENTIFIER ::= { setup 5 }
email OBJECT IDENTIFIER ::= { setup 6 }
alarmLog OBJECT IDENTIFIER ::= { setup 7 }
alarmPolarity OBJECT IDENTIFIER ::= { setup 8 }
region OBJECT IDENTIFIER ::= { setup 9 }
testOscillator OBJECT IDENTIFIER ::= { setup 10 }
passwords OBJECT IDENTIFIER ::= { model650 9 }
-- Custom defined textual-conventions
OnOff ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a boolean value."
SYNTAX INTEGER { off(0), on(1) }
----------------------------------
-- Traps
----------------------------------
audioLossTrap NOTIFICATION-TYPE
OBJECTS { audioLossAlarm }
STATUS current
DESCRIPTION
"This trap occurs when the Audio Loss alarm is triggered on OR off.
The status of the alarm is included as a variable binding in the form
of the audioLossAlarm object."
::= {notifications 1}
lowSignalTrap NOTIFICATION-TYPE
OBJECTS { lowSignalAlarm }
STATUS current
DESCRIPTION
"This trap occurs when the Low Signal alarm is triggered on OR off.
The status of the alarm is included as a variable binding in the form
of the lowSignalAlarm object."
::= {notifications 2}
rdsErrorTrap NOTIFICATION-TYPE
OBJECTS { rdsErrorAlarm }
STATUS current
DESCRIPTION
"This trap occurs when the RDS Error/Mismatch alarm is triggered on OR off.
The status of the alarm is included as a variable binding in the form
of the rdsErrorAlarm object."
::= {notifications 3}
pilotLossTrap NOTIFICATION-TYPE
OBJECTS { pilotLossAlarm }
STATUS current
DESCRIPTION
"This trap occurs when the Pilot Loss alarm is triggered on OR off.
The status of the alarm is included as a variable binding in the form
of the pilotLossAlarm object."
::= {notifications 4}
----------------------------------
-- Product Info
----------------------------------
serial OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number."
::= { product 1 }
version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current firmware version."
::= { product 2 }
date OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date of firmware version."
::= { product 3 }
----------------------------------
-- Now Playing
----------------------------------
frequency OBJECT-TYPE
SYNTAX Integer32 (6500..10800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently tuned frequency, in 10kHz steps. Can be set
between 6500 and 10800."
::= { nowPlaying 1 }
currentPreset OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently selected preset. The preset can
also be set to 1-10. A value of 0 means a
preset is not selected."
::= { nowPlaying 2 }
antenna OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently selected antenna. Can be
set to antenna 1 or 2."
::= { nowPlaying 3 }
rssi OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Relative Signal Strength Indicator
(RF strength). The range is 0-120dBuV."
::= { nowPlaying 4 }
bandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IF Bandwidth (units: kHz)."
::= { nowPlaying 5 }
multipath OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of Multipath. The Range is 0-100%."
::= { nowPlaying 6 }
noise OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of Ultrasonic Noise. The Range is 0-100%."
::= { nowPlaying 7 }
leftLeveldB OBJECT-TYPE
SYNTAX Integer32 (-128..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left channel level (units: dB)."
::= { nowPlaying 8 }
rightLeveldB OBJECT-TYPE
SYNTAX Integer32 (-128..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Right channel level (units: dB)."
::= { nowPlaying 9 }
leftPlusRightLeveldB OBJECT-TYPE
SYNTAX Integer32 (-128..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left+Right level (units: dB)."
::= { nowPlaying 10 }
leftMinusRightLeveldB OBJECT-TYPE
SYNTAX Integer32 (-128..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left-Right level (units: dB)."
::= { nowPlaying 11 }
status OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This describes the current status, such as if everything is
normal or if a backup source is in use."
::= { nowPlaying 12 }
----------------------------------
-- RECEPTION TOOLS
----------------------------------
bandwidthMode OBJECT-TYPE
SYNTAX INTEGER { fixed(0), auto(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IF Bandwidth Mode - set to automatically adjust IF bandwidth, or
used a fixed bandwidth set by the fixedBandwidth OID."
::= { bandwidthIF 1 }
fixedBandwidth OBJECT-TYPE
SYNTAX INTEGER { bw56kHz(0), bw64kHz(1), bw72kHz(2), bw84kHz(3), bw97kHz(4), bw114kHz(5), bw133kHz(6), bw151kHz(7), bw168kHz(8), bw184kHz(9),
bw200kHz(10), bw217kHz(11), bw236kHz(12), bw254kHz(13), bw287kHz(14), bw311kHz(15) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IF Bandwidth used when the mode is set to fixed."
::= { bandwidthIF 2 }
----------------------------------
-- Reception Tools - Stereo Blend
----------------------------------
stereoBlendAmount OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of stereo blend processing applied (Units: %)."
::= { stereoBlend 1 }
stereoBlendAuto OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to auto, the blend processing is handled automatically.
the other stereo blend settings are not used."
::= { stereoBlend 2 }
stereoBlendUseRSSI OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use RSSI as a metric for blend processing."
::= { stereoBlend 3 }
stereoBlendThresholdRSSI OBJECT-TYPE
SYNTAX Integer32 (30..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the RSSI drops below this set value, more blending will occur (Units: dBuV)."
::= { stereoBlend 4 }
stereoBlendUseUSN OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use USN as a metric for blend processing."
::= { stereoBlend 5 }
stereoBlendThresholdUSN OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the USN goes above this set value, more blending will occur (Units: %)."
::= { stereoBlend 6 }
stereoBlendUseMultipath OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use multipath as a metric for blend processing."
::= { stereoBlend 7 }
stereoBlendThresholdMultipath OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the multipath goes above this set value, more blending will occur (Units: %)."
::= { stereoBlend 8 }
----------------------------------
-- Reception Tools - High Blend
----------------------------------
highBlendAmount OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of stereo blend processing applied (Units: %)."
::= { highBlend 1 }
highBlendAuto OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to auto, the high blend processing is handled automatically.
the other high blend settings are not used."
::= { highBlend 2 }
highBlendUseRSSI OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use RSSI as a metric for high blend processing."
::= { highBlend 3 }
highBlendThresholdRSSI OBJECT-TYPE
SYNTAX Integer32 (30..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the RSSI drops below this set value, more high blending will occur (Units: dBuV)."
::= { highBlend 4 }
highBlendUseUSN OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use USN as a metric for high blend processing."
::= { highBlend 5 }
highBlendThresholdUSN OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the USN goes above this set value, more high blending will occur (Units: %)."
::= { highBlend 6 }
highBlendUseMultipath OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use multipath as a metric for high blend processing."
::= { highBlend 7 }
highBlendThresholdMultipath OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the multipath goes above this set value, more high blending will occur (Units: %)."
::= { highBlend 8 }
----------------------------------
-- Reception Tools - Band Blend
----------------------------------
bandBlendEnable OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable 4 band blend processing."
::= { bandBlend 1 }
bandBlendControl OBJECT-TYPE
SYNTAX Integer32 (50..150)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the agressiveness of the 4 band blend."
::= { bandBlend 2 }
bandBlendLF OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of blending in the Low Frequency band (Units: %)."
::= { bandBlend 3 }
bandBlend2k OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of blending in the 2kHz band (Units: %)."
::= { bandBlend 4 }
bandBlend5k OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of blending in the 5kHz band (Units: %)."
::= { bandBlend 5 }
bandBlendHF OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of blending in the High Frequency band (Units: %)."
::= { bandBlend 6 }
----------------------------------
-- Reception Tools - Highcut
----------------------------------
highcutAmount OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of highcut processing applied (Units: %)."
::= { highcut 1 }
highcutAuto OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to auto, the highcut processing is handled automatically.
the other high blend settings are not used."
::= { highcut 2 }
highcutUseRSSI OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use RSSI as a metric for highcut processing."
::= { highcut 3 }
highcutThresholdRSSI OBJECT-TYPE
SYNTAX Integer32 (30..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the RSSI drops below this set value, more highcut will occur (Units: dBuV)."
::= { highcut 4 }
highcutUseUSN OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use USN as a metric for highcut processing."
::= { highcut 5 }
highcutThresholdUSN OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the USN goes above this set value, more highcut will occur (Units: %)."
::= { highcut 6 }
highcutUseMultipath OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ON to use multipath as a metric for highcut processing."
::= { highcut 7 }
highcutThresholdMultipath OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the multipath goes above this set value, more highcut will occur (Units: %)."
::= { highcut 8 }
----------------------------------
-- Reception Tools - Misc
----------------------------------
monoStereo OBJECT-TYPE
SYNTAX INTEGER { forcedMono(0), stereo(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to forced mono or stereo (auto)."
::= { receptionTools 6 }
multipathSuppression OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the use of Multipath Suppression processing."
::= { receptionTools 7 }
channelEqualizer OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the use of the Channel Equalizer."
::= { receptionTools 8 }
----------------------------------
-- RDS
----------------------------------
pi OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PI (Program Identification) Code."
::= { rds 1 }
call OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Callsign/Call Letters for the received PI Code."
::= { rds 2 }
ps OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PS (Program Service)."
::= { rds 3 }
rt OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RT (Radio Text)."
::= { rds 4 }
pty OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PTY (Program Type)."
::= { rds 5 }
ptyn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PTYN (Program Type Name)."
::= { rds 6 }
rdsTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RDS time received."
::= { rds 7 }
ms OBJECT-TYPE
SYNTAX INTEGER { speech(0), music(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Music/Speech flag."
::= { rds 8 }
di OBJECT-TYPE
SYNTAX INTEGER { mono(0), stereo(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mono/Stereo flag."
::= { rds 9 }
tp OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Traffic Programming flag."
::= { rds 10 }
ta OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Traffic Alert flag."
::= { rds 11 }
----------------------------------
-- ALARMS
----------------------------------
----------------------------------
-- Alarms - Status
----------------------------------
audioLossAlarm OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the Audio Loss alarm."
::= { alarmStatus 1 }
lowSignalAlarm OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the Low Signal alarm."
::= { alarmStatus 2 }
rdsErrorAlarm OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the RDS Error/Mismatch alarm."
::= { alarmStatus 3 }
pilotLossAlarm OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the Pilot Loss alarm."
::= { alarmStatus 4 }
----------------------------------
-- Alarms - Audio Loss
----------------------------------
audioLossEnable OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Audio Loss alarm."
::= { audioLoss 1 }
audioLossThreshOn OBJECT-TYPE
SYNTAX Integer32 (-40..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for alarm turning on (units: dB)."
::= { audioLoss 2 }
audioLossThreshOff OBJECT-TYPE
SYNTAX Integer32 (-40..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for alarm turning off (units: dB)."
::= { audioLoss 3 }
audioLossTimeOn OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time the audio level must be below the Threshold On
value before the alarm turns on (units: seconds)."
::= { audioLoss 4 }
audioLossTimeOff OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time the audio level must be above the Threshold On
value before the alarm turns off (units: seconds)."
::= { audioLoss 5 }
----------------------------------
-- Alarms - Low Signal
----------------------------------
lowSignalEnable OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Low Signal alarm."
::= { lowSignal 1 }
lowSignalMute OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, radio will mute when Low Signal alarm is on."
::= { lowSignal 2 }
lowSignalThreshOn OBJECT-TYPE
SYNTAX Integer32 (0..80)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for alarm turning on (units: dBuV)."
::= { lowSignal 3 }
lowSignalThreshOff OBJECT-TYPE
SYNTAX Integer32 (0..80)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for alarm turning off (units: dBuV)."
::= { lowSignal 4 }
lowSignalTimeOn OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time the RSSI level must be below the Threshold On
value before the alarm turns on (units: seconds)."
::= { lowSignal 5 }
lowSignalTimeOff OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time the RSSI level must be above the Threshold Off
value before the alarm turns off (units: seconds)."
::= { lowSignal 6 }
----------------------------------
-- Alarms - RDS Loss
----------------------------------
rdsLossEnable OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the RDS Error alarm."
::= { rdsLoss 1 }
rdsPIErrorEnable OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, the alarm will occur if RDS is present but the received PI does
not match that set in rdsPICode."
::= { rdsLoss 2 }
rdsPICode OBJECT-TYPE
SYNTAX DisplayString (SIZE (4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PI Code to compare with received PI."
::= { rdsLoss 3 }
rdsLossTimeOn OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time the RDS must be gone/PI Code incorrect
before the alarm turns on (units: seconds)."
::= { rdsLoss 4 }
rdsLossTimeOff OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time the RDS must be present/PI Code correct
before the alarm turns off (units: seconds)."
::= { rdsLoss 5 }
----------------------------------
-- Alarms - Pilot Loss
----------------------------------
pilotLossEnable OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Pilot Loss alarm."
::= { pilotLoss 1 }
pilotLossTimeOn OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time the pilot must be gone
before the alarm turns on (units: seconds)."
::= { pilotLoss 2 }
pilotLossTimeOff OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time the pilot must be present
before the alarm turns off (units: seconds)."
::= { pilotLoss 3 }
----------------------------------
-- Alarms - Audio Failover
----------------------------------
failoverAudio OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Audio Failover to backup source will occur when there is an
Audio Loss alarm."
::= { audioFailover 1 }
failoverRSSI OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Audio Failover to backup source will occur when there is a
Low Signal alarm."
::= { audioFailover 2 }
failoverRDS OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Audio Failover to backup source will occur when there is a
RDS alarm."
::= { audioFailover 3 }
failoverSource OBJECT-TYPE
SYNTAX INTEGER { stream(0), sdCard(1), streamToSD(2), nextPreset(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup audio source to use when the failover is triggered."
::= { audioFailover 4 }
failoverStreamURL OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The URL for the backup stream."
::= { audioFailover 5 }
----------------------------------
-- STEREO REGEN
----------------------------------
regenMode OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to off (Composite Pass-Through) or on (Composite Regen)."
::= { stereoRegen 1 }
----------------------------------
-- Stereo Regen - Pilot
----------------------------------
regenPilotEnable OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn the pilot on/off when in regen mode."
::= { regenPilot 1 }
regenPilotInjection OBJECT-TYPE
SYNTAX Integer32 (60..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pilot injection level when in regen mode
(Units: 0.1%, Ex: 90 = 9.0%)."
::= { regenPilot 2 }
----------------------------------
-- Stereo Regen - RDS
----------------------------------
regenRDSEnable OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn RDS on/off when in regen mode."
::= { regenRDS 1 }
regenRDSInjection OBJECT-TYPE
SYNTAX Integer32 (30..80)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RDS injection level when in regen mode
(Units: 0.1%, Ex: 50 = 5.0%)."
::= { regenRDS 2 }
regenRDSMode OBJECT-TYPE
SYNTAX INTEGER { reencode(0), reencodeWithNewPI(1), builtIn(2), builtInWithTime(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets how the RDS should be regenerated."
::= { regenRDS 3 }
builtInScrollSpeed OBJECT-TYPE
SYNTAX Integer32 (1..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets how quickly the PS field will scroll with the built-in RDS.
Higher values can cause jumbled characters on some radios."
::= { regenRDS 4 }
builtInPI OBJECT-TYPE
SYNTAX DisplayString (SIZE (4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Built-in RDS PI Code (also used for re-encode with new PI mode)."
::= { regenRDS 5 }
builtInPS OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Built-in RDS PS text. The RDS encoder will automatically parse
longer messages."
::= { regenRDS 6 }
builtInRT OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Built-in RDS Radio Text."
::= { regenRDS 7 }
builtInPTY OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Built-in RDS Program Type."
::= { regenRDS 8 }
builtInMS OBJECT-TYPE
SYNTAX INTEGER { speech(0), music(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Built-in RDS Music/Speed flag."
::= { regenRDS 9 }
builtInDI OBJECT-TYPE
SYNTAX INTEGER { mono(0), stereo(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Built-in RDS stereo/mono flag."
::= { regenRDS 10 }
builtInTP OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Built-in RDS Traffic Programming flag."
::= { regenRDS 11 }
----------------------------------
-- SETUP
----------------------------------
----------------------------------
-- Setup - Outputs
----------------------------------
analogLevel OBJECT-TYPE
SYNTAX Integer32 (-200..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Analog Output level
(Units: 0.1dB, Ex. -100 = -10.0dB)."
::= { outputs 1 }
analogDeemphasis OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"De-emphasis applied to analog outputs."
::= { outputs 2 }
digitalLevel OBJECT-TYPE
SYNTAX Integer32 (-300..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Digital Output level
(Units: 0.1dB, Ex. -200 = -20.0dB)."
::= { outputs 3 }
digitalDeemphasis OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"De-emphasis applied to AES output."
::= { outputs 4 }
digitalSamplerate OBJECT-TYPE
SYNTAX INTEGER { sr32kHz(0), sr44kHz(1), sr48kHz(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sample Rate of the AES output."
::= { outputs 5 }
mpx1Level OBJECT-TYPE
SYNTAX Integer32 (1000..6000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPX1 Output level (Units: mVpp, Ex. 3100 = 3.10Vpp).
Though the units are mVpp, the resolution is less than 1mVpp.
When this value is set, it will round to the closest possible value."
::= { outputs 6 }
mpx2Level OBJECT-TYPE
SYNTAX Integer32 (1000..6000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPX2 Output level (Units: mVpp, Ex. 3100 = 3.10Vpp).
Though the units are mVpp, the resolution is less than 1mVpp.
When this value is set, it will round to the closest possible value."
::= { outputs 7 }
mpxClipping OBJECT-TYPE
SYNTAX Integer32 (-20..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPX Clipping amount (Units: 0.1dB, Ex. 16 = 1.6dB.
This can be set in 0.2dB steps."
::= { outputs 8 }
----------------------------------
-- Setup - Network
----------------------------------
dhcp OBJECT-TYPE
SYNTAX INTEGER { staticIP(0), dhcpEnabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP enabled, or disabled (static IP)."
::= { network 1 }
ip OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device IP Address."
::= { network 2 }
gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway IP Address."
::= { network 3 }
subnet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device subnet mask."
::= { network 4 }
dns OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device DNS address."
::= { network 5 }
httpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"HTTP port for webserver."
::= { network 6 }
hostname OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NBNS hostname."
::= { network 7 }
mac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of this device."
::= { network 8 }
----------------------------------
-- Setup - Dynamic DNS
----------------------------------
ddnsMode OBJECT-TYPE
SYNTAX INTEGER { disabled(0), dyn(1), noip(2), dnsomatic(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic DNS provider/mode."
::= { dynDNS 1 }
ddnsHostname OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Your DDNS hostname (proper web addess)."
::= { dynDNS 2 }
ddnsUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The username for your DDNS account."
::= { dynDNS 3 }
ddnsPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password for your DDNS account."
::= { dynDNS 4 }
ddnsStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the DDNS service."
::= { dynDNS 5 }
----------------------------------
-- Setup - Time
----------------------------------
timezone OBJECT-TYPE
SYNTAX Integer32 (-120..140)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UTC offset (Units: 0.1hours). EX: -80 = UTC-8.0.
Can be set in 0.5 hour increments."
::= { time 1 }
dst OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether Daylight Saving Time is currently in effect."
::= { time 2 }
autodst OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable to automatically follow US Daylight Saving Time."
::= { time 3 }
timeServer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"URL for a custom NTP time server."
::= { time 4 }
----------------------------------
-- Setup - SNMP
----------------------------------
snmpMode OBJECT-TYPE
SYNTAX INTEGER { disabled(0), readOnly(1), readWrite(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP mode. Restrict SNMP read or write."
::= { snmp 1 }
snmpReadCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP read community string for read access."
::= { snmp 2 }
snmpWriteCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP write community string for write access."
::= { snmp 3 }
snmpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UDP port for SNMP communication.
SNMP standard is UDP port 161."
::= { snmp 4 }
snmpTrapsPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UDP port for SNMP traps.
SNMP standard is UDP port 162."
::= { snmp 5 }
snmpTrapDestination1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address 1 to send traps to."
::= { snmp 6 }
snmpTrapDestination2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address 2 to send traps to."
::= { snmp 7 }
snmpTrapDestination3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address 3 to send traps to."
::= { snmp 8 }
----------------------------------
-- Setup - Email
----------------------------------
smtpServer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"URL or IP of SMTP server."
::= { email 1 }
smtpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TCP port for SMTP (depends on server)."
::= { email 2 }
ssl OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable SSL security for connection
to SMTP server."
::= { email 3 }
emailFrom OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will show as the 'From' when you receive
emails from this unit."
::= { email 4 }
emailUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The email address to send from."
::= { email 5 }
emailPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password to the email address to send from."
::= { email 6 }
recipientTable OBJECT-TYPE
SYNTAX SEQUENCE OF RecipientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of 10 email recipients."
::= { email 7 }
recipientEntry OBJECT-TYPE
SYNTAX RecipientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Single recipient entry."
INDEX { recipientIndex }
::= { recipientTable 1 }
RecipientEntry ::= SEQUENCE {
recipientIndex Integer32,
emailAddress DisplayString,
audioLossEmail OnOff,
lowSignalEmail OnOff,
rdsLossEmail OnOff,
pilotLossEmail OnOff,
dailyLogEmail OnOff,
weeklyLogEmail OnOff,
monthlyLogEmail OnOff
}
recipientIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of recipient (recipients 1 through 10)."
::= { recipientEntry 1 }
emailAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Email address for the recipient of email notifications."
::= { recipientEntry 2 }
audioLossEmail OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This recipient will receive Audio Loss emails."
::= { recipientEntry 3 }
lowSignalEmail OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This recipient will receive Low Signal emails."
::= { recipientEntry 4 }
rdsLossEmail OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This recipient will receive RDS Loss emails."
::= { recipientEntry 5 }
pilotLossEmail OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This recipient will receive Pilot Loss emails."
::= { recipientEntry 6 }
dailyLogEmail OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This recipient will receive daily log emails."
::= { recipientEntry 7 }
weeklyLogEmail OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This recipient will receive weekly log emails."
::= { recipientEntry 8 }
monthlyLogEmail OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This recipient will receive monthly log emails."
::= { recipientEntry 9 }
----------------------------------
-- Setup - Alarm Log Settings
----------------------------------
alarmLogStatus OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fullness of alarm log (units: %). Set to 0 to clear the alarm log."
::= { alarmLog 1 }
alarmLogFullEmail OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send an email reminder when the log is (%) full."
::= { alarmLog 2 }
----------------------------------
-- Setup - Alarm Polarity
----------------------------------
audioLossPolarity OBJECT-TYPE
SYNTAX INTEGER { activeGround(0), activeOpen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Polarity of the Audio Loss alarm output."
::= { alarmPolarity 1 }
lowSignalPolarity OBJECT-TYPE
SYNTAX INTEGER { activeGround(0), activeOpen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Polarity of the Low Signal alarm output."
::= { alarmPolarity 2 }
rdsLossPolarity OBJECT-TYPE
SYNTAX INTEGER { activeGround(0), activeOpen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Polarity of the RDS Loss alarm output."
::= { alarmPolarity 3 }
pilotLossPolarity OBJECT-TYPE
SYNTAX INTEGER { activeGround(0), activeOpen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Polarity of the Pilot Loss alarm output."
::= { alarmPolarity 4 }
----------------------------------
-- Setup - Region
----------------------------------
tuningSteps OBJECT-TYPE
SYNTAX INTEGER { tune10kHz(0), tune100kHz(1), tune200kHz(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The step size used when tuning from the front panel and web."
::= { region 1 }
deemphasis OBJECT-TYPE
SYNTAX INTEGER { deemph50us(0), deemph75us(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set deemphasis to 50us or 75us."
::= { region 2 }
rdsDecodeMode OBJECT-TYPE
SYNTAX INTEGER { rds(0), rbds(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set RDS decoding mode to RDS (Europe) or RBDS (North America)."
::= { region 3 }
----------------------------------
-- Setup - Test Oscillator
----------------------------------
oscMode OBJECT-TYPE
SYNTAX INTEGER { oscOff(0), oscLeft(1), oscRight(2), oscLeftRight(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the internal tone generator for testing purposes."
::= { testOscillator 1 }
oscFrequency OBJECT-TYPE
SYNTAX Integer32 (10..20000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frequency of the test oscillator (Units: Hz).
Can be set in multiples of 10Hz."
::= { testOscillator 2 }
oscLevel OBJECT-TYPE
SYNTAX Integer32 (-30..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Level of the test oscillator (Units: dB)."
::= { testOscillator 3 }
----------------------------------
-- Setup - Misc
----------------------------------
serialPortBaudRate OBJECT-TYPE
SYNTAX INTEGER { baud9600(0), baud19200(1), baud38400(2), baud57600(3), baud115200(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the internal tone generator for testing purposes."
::= { setup 11 }
----------------------------------
-- Passwords
----------------------------------
frontPanelPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password for restricting front panel access."
::= { passwords 1 }
webpagesPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password for restricting webpage access."
::= { passwords 2 }
END
Reference in a new issue View git blame Copy permalink