graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/ibm/CME-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

30939 lines
1.4 MiB
Raw Permalink Blame History

-- ********************************************************************************
-- File : cme.mib
-- Description : Chassis Management Module (CMM) MIB for SNMP
-- Version : v21
-- Date : April 2014
-- Copyright (c) 2014 IBM All Rights Reserved.
-- ********************************************************************************
CME-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE FROM RFC-1212
enterprises FROM RFC1155-SMI
IpAddress FROM RFC1155-SMI
TRAP-TYPE FROM RFC-1215;
-- textual conventions
InetAddressIPv6 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
STATUS current
DESCRIPTION
"Represents an IPv6 network address. Since MIB browsers
may require different formats, the address is
expected to be the 16 byte address in network-byte order,
and shortened formats such as 0::0 are not accepted in SET
operations. Two common examples are:
The NetSNMP command line will accept SET requests like:
snmpset -v1 -cprivate <host> s 2001:00:00:00:FFFF:CCC4:BBB2:AAA6
Other MIB browsers may require the SET request value to be formatted as:
# 0x20 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0xFF 0xCC 0xC4 0xBB 0xB2 0xAA 0xA6"
SYNTAX OCTET STRING (SIZE (16))
EntryStatus ::= INTEGER
{ valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
-- The status of a table entry.
--
-- Setting this object to the value invalid(4) has the
-- effect of invalidating the corresponding entry.
-- That is, it effectively disassociates the mapping
-- identified with said entry.
-- It is an implementation-specific matter as to whether
-- the agent removes an invalidated entry from the table.
-- Accordingly, management stations must be prepared to
-- receive tabular information from agents that corresponds
-- to entries currently not in use. Proper
-- interpretation of such entries requires examination
-- of the relevant EntryStatus object.
--
-- An existing instance of this object cannot be set to
-- createRequest(2). This object may only be set to
-- createRequest(2) when this instance is created. When
-- this object is created, the agent may wish to create
-- supplemental object instances to complete a conceptual
-- row in this table. Immediately after completing the
-- create operation, the agent must set this object to
-- underCreation(3).
--
-- Entries shall exist in the underCreation(3) state until
-- the management station is finished configuring the
-- entry and sets this object to valid(1) or aborts,
-- setting this object to invalid(4). If the agent
-- determines that an entry has been in the
-- underCreation(3) state for an abnormally long time,
-- it may decide that the management station has
-- crashed. If the agent makes this decision,
-- it may set this object to invalid(4) to reclaim the
-- entry. A prudent agent will understand that the
-- management station may need to wait for human input
-- and will allow for that possibility in its
-- determination of this abnormally long period.
-- IBM enterprise group
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
-- IBM products group
ibmAgents OBJECT IDENTIFIER ::= { ibm 3 }
-- IBM Advanced System Management Support Processor (SP) agent group
netfinitySupportProcessorAgent OBJECT IDENTIFIER ::= { ibmAgents 51 }
-- IBM BladeCenter Management Module (MM)
bladeCenterSnmpMIB OBJECT IDENTIFIER ::= { netfinitySupportProcessorAgent 2 }
-- This group of objects provides the various environmental monitors for
-- chassis
monitors OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 2 }
-- This group of objects provides the error log information
errorLogs OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 3 }
-- This group of objects provides configuration functions for the CME
configureSP OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 4 }
-- This group of objects provides functions to boot the CME
restartReset OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 7 }
-- This group of objects provides information specific to various
-- components in the chassis
components OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 22 }
-- This group of objects provides information specific to service
service OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 23 }
-- ********************************************************************************
-- Temperature
-- ********************************************************************************
temperature OBJECT IDENTIFIER ::= { monitors 1 }
-- ********************************************************************************
-- Internal Temperature (was planarTemp)
-- ********************************************************************************
internalTemp OBJECT IDENTIFIER ::= { temperature 1 }
cmmTemp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This field is deprecated. The return value of this field is the same as rearLEDCardTemp.
Chassis management module temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system."
::= { internalTemp 2 }
-- ********************************************************************************
-- System Ambient Temperature (was ambient frontPanelTemp)
-- ********************************************************************************
ambientTemp OBJECT IDENTIFIER ::= { temperature 5 }
rearLEDCardTempAvg OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average rear LED card temperature in degrees centigrade(C).
This is surrounding temperature where the system is installed.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system."
::= { ambientTemp 1 }
rearLEDCardTempMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum rear LED card temperature in degrees centigrade(C).
This is surrounding temperature where the system is installed.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system."
::= { ambientTemp 2 }
rearLEDCardTempMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum rear LED card temperature in degrees centigrade(C).
This is surrounding temperature where the system is installed.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system."
::= { ambientTemp 3 }
-- ********************************************************************************
-- System monitor Temperature
-- ********************************************************************************
monitorTemp OBJECT IDENTIFIER ::= { temperature 9 }
hotAirRecircMonitoring OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this is enabled, the management module will monitor for Hot Air
Recirculation by detecting non-uniform air temperature(s) that may
be entering the front of the chassis.
This could be due to either localized hot or cold air reaching at
least one of the node's or chassis temperature sensors and it
exceeding the acceptable range. When enabled, this monitor will
generate an event and be transmitted to any configured remote
alert recipient."
::= { monitorTemp 3 }
hotAirRecircTempDeltaThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to read or change the temperature delta threshold for
Hot Air Recirculation detection. Values are enforced to be in the inclusive
range between 5.00C and 9.00C and are specified as hundreths of a degree. For
example, a value of 659 would equate to a threshold of 6.59 degrees C."
::= { monitorTemp 5 }
hotAirRecircStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotAirRecircStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of hot air recirculation status information."
::= { monitorTemp 7 }
hotAirRecircStatusEntry OBJECT-TYPE
SYNTAX HotAirRecircStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Hot air recirculation status entry"
INDEX { hotAirRecircStatusTopologyPath, hotAirRecircStatusIndex }
::= { hotAirRecircStatusTable 1 }
HotAirRecircStatusEntry ::= SEQUENCE {
hotAirRecircStatusTopologyPath OCTET STRING,
hotAirRecircStatusIndex INTEGER,
hotAirRecircStatusName OCTET STRING,
hotAirRecircStatusSensorLabel OCTET STRING,
hotAirRecircStatusSensorReading OCTET STRING,
hotAirRecircStatusExceeded INTEGER
}
hotAirRecircStatusTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component firmware table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { hotAirRecircStatusEntry 2 }
hotAirRecircStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each component may have one or more sensor associated with it, this index object
identifies the particular instance."
::= { hotAirRecircStatusEntry 3 }
hotAirRecircStatusName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string"
::= { hotAirRecircStatusEntry 4 }
hotAirRecircStatusSensorLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The text label of the sensor as a null terminated string"
::= { hotAirRecircStatusEntry 5 }
hotAirRecircStatusSensorReading OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ambient temperature reading for this component in degrees centigrade(C).
The string is formatted as 'dd.dd Centigrade'."
::= { hotAirRecircStatusEntry 6 }
hotAirRecircStatusExceeded OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether this component has exceeded the threshold
of the acceptable temperature being monitored for hot air recirculation."
::= { hotAirRecircStatusEntry 7 }
-- ********************************************************************************
-- Chassis Fans
-- ********************************************************************************
chassisFans OBJECT IDENTIFIER ::= { monitors 3 }
-- ********************************************************************************
-- Chassis Fans Information Table
-- ********************************************************************************
chassisFansTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChassisFansEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of chassis Fan information."
::= { chassisFans 50 }
chassisFansEntry OBJECT-TYPE
SYNTAX ChassisFansEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis Fan information entry"
INDEX { chassisFanIndex }
::= { chassisFansTable 1 }
ChassisFansEntry ::= SEQUENCE {
chassisFanIndex INTEGER,
chassisFanId INTEGER,
chassisFanSpeed OCTET STRING,
chassisFanState INTEGER,
chassisFanSpeedRPM OCTET STRING,
chassisFanControllerState INTEGER,
chassisFanCoolingZone INTEGER
}
chassisFanIndex OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Fans table index. "
::= { chassisFansEntry 1 }
chassisFanId OBJECT-TYPE
SYNTAX INTEGER {
chassisfan1(1),
chassisfan2(2),
chassisfan3(3),
chassisfan4(4),
chassisfan5(5),
chassisfan6(6),
chassisfan7(7),
chassisfan8(8),
chassisfan9(9),
chassisfan10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric chassis fan ID."
::= { chassisFansEntry 2 }
chassisFanSpeed OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan speed expressed in percent(%) of maximum RPM.
An octet string expressed as 'ddd% of maximum' where:
d is a decimal digit or blank space for a leading zero.
If the chassis fan is determined not to be running or
the chassis fan speed cannot be determined, the string will
indicate 'Offline'.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system."
::= { chassisFansEntry 3 }
chassisFanState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
bad(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The health state for the chassis fan.
Note that the other UIs may use slightly different terminology for the
three health state values, as such:
WEB - Normal, Attention, Critical
CLI - OK, Non-critical, Critical
"
::= { chassisFansEntry 4}
chassisFanSpeedRPM OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan speed expressed in RPM.
If the chassis fan is determined not to be running or
the chassis fan speed cannot be determined, the string will
indicate 'Offline'.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system."
::= { chassisFansEntry 5 }
chassisFanControllerState OBJECT-TYPE
SYNTAX INTEGER {
operational(0),
flashing(1),
notPresent(2),
communicationError(3),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The controller health state for the chassis fan."
::= { chassisFansEntry 6}
chassisFanCoolingZone OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
coolingZone1(1),
coolingZone2(2),
coolingZone3(3),
coolingZone4(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling zone for the chassis fan."
::= { chassisFansEntry 7}
-- ********************************************************************************
-- Chassis Fans Zone Table
-- ********************************************************************************
chassisCoolingZoneTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChassisCoolingZoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of chassis cooling zone information."
::= { chassisFans 51 }
chassisCoolingZoneEntry OBJECT-TYPE
SYNTAX ChassisCoolingZoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis cooling zone information entry"
INDEX { chassisCoolingIndex }
::= { chassisCoolingZoneTable 1 }
ChassisCoolingZoneEntry ::= SEQUENCE {
chassisCoolingIndex INTEGER,
chassisCoolingZone INTEGER,
chassisCoolingZoneStatus INTEGER,
chassisCoolingZoneComponent INTEGER
}
chassisCoolingIndex OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Cooling Zones table index."
::= { chassisCoolingZoneEntry 1 }
chassisCoolingZone OBJECT-TYPE
SYNTAX INTEGER {
coolingZone1(1),
coolingZone2(2),
coolingZone3(3),
coolingZone4(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cooling zone for the chassis component."
::= { chassisCoolingZoneEntry 2 }
chassisCoolingZoneStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
bad(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The health state of the chassis cooling zone.
Note: This is the health of the cooling zone, not the health
status of the component in chassisCoolingZoneComponent.
Note that the other UIs may use slightly different terminology for the
three health state values, as such:
WEB - Normal, Attention, Critical
CLI - OK, Non-critical, Critical
"
::= { chassisCoolingZoneEntry 3 }
chassisCoolingZoneComponent OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14),
switchModule1(41),
switchModule2(42),
switchModule3(43),
switchModule4(44),
mgmtModule1(61),
mgmtModule2(62),
fan1(81),
fan2(82),
fan3(83),
fan4(84),
fan5(85),
fan6(86),
fan7(87),
fan8(88),
fan9(89),
fan10(90)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A component within a cooling zone."
::= { chassisCoolingZoneEntry 4 }
-- ********************************************************************************
-- Power Module Health State
-- ********************************************************************************
powerModuleHealth OBJECT IDENTIFIER ::= { monitors 4 }
powerModuleHealthTable OBJECT-TYPE
SYNTAX SEQUENCE OF PowerModuleHealthEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of power module health information. Contains
the power health information for each power module."
::= { powerModuleHealth 1 }
powerModuleHealthEntry OBJECT-TYPE
SYNTAX PowerModuleHealthEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Power Module health entry"
INDEX { powerModuleIndex }
::= { powerModuleHealthTable 1 }
PowerModuleHealthEntry ::= SEQUENCE {
powerModuleIndex INTEGER,
powerModuleExists INTEGER,
powerModuleState INTEGER,
powerModuleDetails OCTET STRING,
powerModuleDescription OCTET STRING
}
powerModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power module index."
::= { powerModuleHealthEntry 1 }
powerModuleExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the power module specified exists or not."
::= { powerModuleHealthEntry 2 }
powerModuleState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
notAvailable(3),
critical(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The health state for the power module.
Note that the other UIs may use slightly different terminology for the
three health state values, as such:
WEB - Normal, Attention, Critical
CLI - OK, Non-critical, Critical
"
::= { powerModuleHealthEntry 3}
powerModuleDetails OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The details for this power module."
::= { powerModuleHealthEntry 4 }
powerModuleDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The description for this power module."
::= { powerModuleHealthEntry 9 }
-- ********************************************************************************
-- MM Status
-- ********************************************************************************
spStatus OBJECT IDENTIFIER ::= { monitors 5 }
-- ********************************************************************************
-- Primary BIST
-- ********************************************************************************
mmBistAndChassisStatus OBJECT IDENTIFIER ::= { spStatus 2 }
bistRtc OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST Real Time Clock test result."
::= { mmBistAndChassisStatus 5 }
bistLocalI2CBus OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST Local I2C bus test result."
::= { mmBistAndChassisStatus 7 }
bistPrimaryMainAppFlashImage OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST Primary Main Application Firmware test result."
::= { mmBistAndChassisStatus 8 }
bistSecondaryMainAppFlashImage OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST Secondary Main Application test result."
::= { mmBistAndChassisStatus 9 }
bistBootRomFlashImage OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST Boot Firmware test result."
::= { mmBistAndChassisStatus 10 }
bistEthernetPort1 OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST external eth0 ethernet port test result."
::= { mmBistAndChassisStatus 11 }
bistExternalI2CDevices OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST external I2C devices test result."
::= { mmBistAndChassisStatus 14 }
bistInternalEthernetSwitch OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST internal external switch test result."
::= { mmBistAndChassisStatus 19 }
bistPrimaryKernel OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST primary kernel test result."
::= { mmBistAndChassisStatus 25 }
bistSecondaryKernel OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST secondary kernel test result."
::= { mmBistAndChassisStatus 26 }
bistPhysicalNetworkLink OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST Physical Network Link test result."
::= { mmBistAndChassisStatus 29 }
bistLogicalNetworkLink OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MM BIST Logical Network Link test result."
::= { mmBistAndChassisStatus 30 }
bistBladesInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blades that are installed on the chassis.
The blades are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of blades supported. If a blade is installed in a
bay, a 1 is present in the string in the position representing
the bay ID as read from left to right. For example, if blades
are installed in bays 1, 5, and 13, and 14 blades are supported,
the string would look like '10001000000010'."
::= { mmBistAndChassisStatus 33 }
bistBladesCommunicating OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blades that are communicating on the chassis.
The blades are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of blades supported. If a blade installed in a
bay is communicating, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if blades are communicating in bays 1, 5, and 13, and 14 blades
are supported, the string would look like '10001000000010'."
::= { mmBistAndChassisStatus 49 }
bistChassisFansInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The chassis fans that are installed on the chassis.
They are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number supported. If one is installed in a
bay, a 1 is present in the string in the position representing
the bay ID as read from left to right. For example, if it
is installed in bay 1, and 2 are supported, the string
would look like '10'."
::= { mmBistAndChassisStatus 65 }
bistChassisFansFunctional OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The chassis fans installed on the chassis that are functional.
They are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number supported. If one is installed in a
bay, a 1 is present in the string in the position representing
the bay ID as read from left to right. For example, if it
is installed in bay 1, and 2 are supported, the string
would look like '10'."
::= { mmBistAndChassisStatus 73 }
bistRearLEDCardInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a rear LED card is installed"
::= { mmBistAndChassisStatus 74 }
bistRearLEDCardCommunicating OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a rear LED card is communicating"
::= { mmBistAndChassisStatus 75 }
bistOtherMMInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a redundant MM is installed."
::= { mmBistAndChassisStatus 76 }
bistOtherMMCommunicating OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a redundant MM is communicating."
::= { mmBistAndChassisStatus 77 }
bistPowerModulesInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power modules that are installed on the chassis.
The power modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of power modules supported. If a power module is
installed in a bay, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if power modules are installed in bays 1 and 3, and 4 power modules
are supported, the string would look like '1010'."
::= { mmBistAndChassisStatus 81 }
bistPowerModulesFunctional OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power modules that are functional on the chassis.
The power modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of power modules supported. If a power module is
installed and functioning in a bay, a 1 is present in the string
in the position representing the bay ID as read from left to right.
For example, if power modules are installed and functioning in bays
1 and 3, and 4 power modules are supported, the string would look
like '1010'."
::= { mmBistAndChassisStatus 89 }
bistSwitchModulesInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch modules that are installed on the chassis.
The switch modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of switch modules supported. If a switch module is
installed in a bay, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if switch modules are installed in bays 1 and 3, and 4 switch modules
are supported, the string would look like '1011'."
::= { mmBistAndChassisStatus 97 }
bistSwitchModulesCommunicating OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch modules that are communicating on the chassis.
The switch modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of switch modules supported. If a switch module is
installed and functioning in a bay, a 1 is present in the string
in the position representing the bay ID as read from left to right.
For example, if switch modules are installed and functioning in bays
1 and 3, and 4 switch modules are supported, the string would look
like '1011'."
::= { mmBistAndChassisStatus 113 }
bistChassisFansMUXAInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether chassis fan MUX A is installed"
::= { mmBistAndChassisStatus 120 }
bistChassisFansMUXAFunctional OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether chassis fan MUX A is functional"
::= { mmBistAndChassisStatus 121 }
bistChassisFansMUXBInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether chassis fan MUX B is installed"
::= { mmBistAndChassisStatus 122 }
bistChassisFansMUXBFunctional OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether chassis fan MUX B is functional"
::= { mmBistAndChassisStatus 123 }
bistLastUpdate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"It is the time when the primary MM updated the last BIST results."
::= { mmBistAndChassisStatus 200 }
-- ********************************************************************************
-- Standby BIST
-- ********************************************************************************
rmmBistAndChassisStatus OBJECT IDENTIFIER ::= { spStatus 3 }
rbistRtc OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standby MM BIST Real Time Clock test result. The time of the last update
can be obtained by querying rbistUpdateTime object."
::= { rmmBistAndChassisStatus 5 }
rbistLocalI2CBus OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standby MM BIST Local I2C bus test result. The time of the last update
can be obtained by querying rbistUpdateTime object."
::= { rmmBistAndChassisStatus 7 }
rbistEthernetPort1 OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standby MM BIST external ethernet port test result. The time of the last update
can be obtained by querying rbistUpdateTime object."
::= { rmmBistAndChassisStatus 11 }
rbistExternalI2CDevices OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standby MM BIST external I2C devices test result collected
when the standby MM was primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object."
::= { rmmBistAndChassisStatus 14 }
rbistInternalEthernetSwitch OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standby MM BIST internal external switch test result.
The time of the last update can be obtained by querying rbistUpdateTime object."
::= { rmmBistAndChassisStatus 19 }
rbistPhysicalNetworkLink OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standby MM BIST Physical Network Link test result collected
when the standby MM was primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object."
::= { rmmBistAndChassisStatus 29 }
rbistLogicalNetworkLink OBJECT-TYPE
SYNTAX INTEGER {
testSucceeded(0),
testFailed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standby MM BIST Logical Network Link test result collected
when the standby MM was primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object."
::= { rmmBistAndChassisStatus 30 }
rbistBladesInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blades that were installed on the chassis when the
standby MM was once primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object.
The blades are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of blades supported. If a blade is installed in a
bay, a 1 is present in the string in the position representing
the bay ID as read from left to right. For example, if blades
are installed in bays 1, 5, and 13, and 14 blades are supported,
the string would look like '10001000000010'. "
::= { rmmBistAndChassisStatus 33 }
rbistBladesCommunicating OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blades that were communicating on the chassis when the
standby MM was once primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object.
The blades are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of blades supported. If a blade installed in a
bay is communicating, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if blades are communicating in bays 1, 5, and 13, and 14 blades
are supported, the string would look like '10001000000010'."
::= { rmmBistAndChassisStatus 49 }
rbistChassisFansInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The chassis fans that were installed on the chassis when the
standby MM was once primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object.
They are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of chassis fans supported. If it is installed in a
bay, a 1 is present in the string in the position representing
the bay ID as read from left to right. For example, if it
is installed in bay 1, and 2 are supported, the string
would look like '10'."
::= { rmmBistAndChassisStatus 65 }
rbistChassisFansFunctional OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The chassis fans installed on the chassis that were functional when the
standby MM was once primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object.
They are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number supported. If it is installed and
functional in a bay, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if one is installed and functional only in bay 1, and 2
are supported, the string would look like '10'."
::= { rmmBistAndChassisStatus 73 }
rbistRearLEDCardInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a rear LED card is installed"
::= { rmmBistAndChassisStatus 74 }
rbistRearLEDCardCommunicating OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a rear LED card is communicating"
::= { rmmBistAndChassisStatus 75 }
rbistOtherMMInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a standby MM was installed when the
standby MM was once primary.The time of the last update
can be obtained by querying rbistUpdateTimePrimary object."
::= { rmmBistAndChassisStatus 76 }
rbistOtherMMCommunicating OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether a standby MM was communicating when the
standby MM was once primary. The time of the last update can be
gotten from the object 'rbistUpdateTimePrimary'."
::= { rmmBistAndChassisStatus 77 }
rbistPowerModulesInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power modules that were installed on the chassis when the
standby MM was once primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object.
The power modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of power modules supported. If a power module was
installed in a bay, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if power modules were installed in bays 1 and 3, and 4 power modules
were supported, the string would look like '1010'."
::= { rmmBistAndChassisStatus 81 }
rbistPowerModulesFunctional OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power modules that were functional on the chassis when the
standby MM was once primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object.
The power modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of power modules supported. If a power module was
installed and functioning in a bay, a 1 is present in the string
in the position representing the bay ID as read from left to right.
For example, if power modules were installed and functioning in bays
1 and 3, and 4 power modules were supported, the string would look
like '1010'."
::= { rmmBistAndChassisStatus 89 }
rbistSwitchModulesInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch modules that were installed on the chassis when the
standby MM was once primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object.
The switch modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of switch modules supported. If a switch module was
installed in a bay, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if switch modules were installed in bays 1 and 3, and 4 switch modules
were supported, the string would look like '1011'."
::= { rmmBistAndChassisStatus 97 }
rbistSwitchModulesCommunicating OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch modules that are communicating on the chassis when the
standby MM was once primary. The time of the last update
can be obtained by querying rbistUpdateTimePrimary object.
The switch modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of switch modules supported. If a switch module was
installed and functioning in a bay, a 1 is present in the string
in the position representing the bay ID as read from left to right.
For example, if switch modules were installed and functioning in bays
1 and 3, and 4 switch modules were supported, the string would look
like '1011'."
::= { rmmBistAndChassisStatus 113 }
rbistChassisFansMUXAInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether chassis fan MUX A is installed"
::= { rmmBistAndChassisStatus 120 }
rbistChassisFansMUXAFunctional OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether chassis fan MUX A is functional"
::= { rmmBistAndChassisStatus 121 }
rbistChassisFansMUXBInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether chassis fan MUX B is installed"
::= { rmmBistAndChassisStatus 122 }
rbistChassisFansMUXBFunctional OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether chassis fan MUX B is functional"
::= { rmmBistAndChassisStatus 123 }
rbistUpdateTime OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"It is the time when the standby MM updated the last BIST results."
::= { rmmBistAndChassisStatus 200 }
rbistLastUpdatePrimary OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"It is the time when the standby MM updated the last BIST results
when it was still primary."
::= { rmmBistAndChassisStatus 201 }
-- ********************************************************************************
-- Power Module Fan Pack Health State
-- ********************************************************************************
fanPack OBJECT IDENTIFIER ::= { monitors 6 }
fanPackTable OBJECT-TYPE
SYNTAX SEQUENCE OF FanPackEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of fan pack information. Contains
the information for each fan pack.
NOTE: Fan packs are also referred to as Power Module Cooling Devices."
::= { fanPack 1 }
fanPackEntry OBJECT-TYPE
SYNTAX FanPackEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Fan Pack entry"
INDEX { fanPackIndex }
::= { fanPackTable 1 }
FanPackEntry ::= SEQUENCE {
fanPackIndex INTEGER,
fanPackExists INTEGER,
fanPackState INTEGER,
fanPackFanCount INTEGER,
fanPackAverageSpeed OCTET STRING,
fanPackAverageSpeedRPM OCTET STRING,
fanPackControllerState INTEGER
}
fanPackIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan Pack sequence index."
::= { fanPackEntry 1 }
fanPackExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the fan pack specified exists or not."
::= { fanPackEntry 2 }
fanPackState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
bad(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The health state for the fan pack.
Note that the other UIs may use slightly different terminology for the
three health state values, as such:
WEB - Normal, Attention, Critical
CLI - OK, Non-critical, Critical
"
::= { fanPackEntry 3}
fanPackFanCount OBJECT-TYPE
SYNTAX INTEGER {
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of fans in the fan pack."
::= { fanPackEntry 4 }
fanPackAverageSpeed OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average speed of all fans in the fan pack expressed in percent(%)
of maximum RPM. If the fan pack is determined not to be running or
the fan pack speed cannot be determined, the string will
indicate 'Offline'. The string 'Not Readable!' indicates that the
given monitor is not supported on this system."
::= { fanPackEntry 5 }
fanPackAverageSpeedRPM OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The average speed of all fans in the fan pack expressed in RPM.
If the fan pack is determined not to be running or the fan pack speed
cannot be determined, the string will indicate 'Offline'. The string
'Not Readable!' indicates that the given monitor is not supported on
this system."
::= { fanPackEntry 6 }
fanPackControllerState OBJECT-TYPE
SYNTAX INTEGER {
operational(0),
flashing(1),
notPresent(2),
communicationError(3),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The health state for the controller for the fan pack."
::= { fanPackEntry 7}
-- ********************************************************************************
-- System Health
-- ********************************************************************************
systemHealth OBJECT IDENTIFIER ::= { monitors 7 }
-- ********************************************************************************
-- System Health Status
-- ********************************************************************************
systemHealthStat OBJECT-TYPE
SYNTAX INTEGER {
critical(0),
nonCritical(2),
systemLevel(4),
normal(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates status of system health for the
system in which the MM resides.
Value of 'critical' indicates a severe error has occurred
and the system may not be functioning. A value of
'nonCritical' indicates that a error has occurred but
the system is currently functioning properly. A value of
'systemLevel' indicates that a condition has occurred
that may change the state of the system in the future but currently
the system is working properly. A value of
'normal' indicates that the system is operating normally."
::= { systemHealth 1 }
-- ********************************************************************************
-- System Health Summary
-- ********************************************************************************
systemHealthSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemHealthSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of System Health summary. Contains more detailed
information about the reasons for the overall system
health status."
::= { systemHealth 2 }
systemHealthSummaryEntry OBJECT-TYPE
SYNTAX SystemHealthSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"System Health Summary entry"
INDEX { systemHealthSummaryIndex }
::= { systemHealthSummaryTable 1 }
SystemHealthSummaryEntry ::= SEQUENCE {
systemHealthSummaryIndex INTEGER,
systemHealthSummarySeverity OCTET STRING,
systemHealthSummaryDescription OCTET STRING,
systemHealthSummaryDateTime OCTET STRING,
systemHealthSummaryAuxData OCTET STRING,
systemHealthSummaryEventID OCTET STRING
}
systemHealthSummaryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary index."
::= { systemHealthSummaryEntry 1 }
systemHealthSummarySeverity OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary severity."
::= { systemHealthSummaryEntry 2 }
systemHealthSummaryDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary description."
::= { systemHealthSummaryEntry 3 }
systemHealthSummaryDateTime OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary date time."
::= { systemHealthSummaryEntry 4 }
systemHealthSummaryAuxData OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary auxilliary event data. If auxilliary
event data is available, it is device-specific event data
provided to the CMM by the device."
::= { systemHealthSummaryEntry 11 }
systemHealthSummaryEventID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary event ID."
::= { systemHealthSummaryEntry 12 }
-- ********************************************************************************
-- LEDs
-- ********************************************************************************
leds OBJECT IDENTIFIER ::= { monitors 8 }
-- ********************************************************************************
-- Front Panel LEDs
-- ********************************************************************************
frontPanelLEDs OBJECT IDENTIFIER ::= { leds 1 }
faultLED OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the front panel system error LED is on or off."
::= { frontPanelLEDs 1 }
checkLogLED OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the front panel system information LED
is on or off. For Write access, the LED can be turned off
only."
::= { frontPanelLEDs 2 }
identifyLED OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
blinking(2),
notAvailable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the front panel identity LED is on or off."
::= { frontPanelLEDs 4 }
-- ********************************************************************************
-- Blade LEDs
-- ********************************************************************************
bladeLEDs OBJECT IDENTIFIER ::= { leds 2 }
-- ********************************************************************************
-- Blade Main LEDs
-- ********************************************************************************
bladeLEDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeLEDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade status information.
NOTE: Querying objects in this table may take significantly longer
than normal, so it is recommended that the query timeout be set to
a large value. On a fully populated chassis, the timeout should be set
to 120 seconds or more."
::= { bladeLEDs 1 }
bladeLEDsEntry OBJECT-TYPE
SYNTAX BladeLEDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade system status entry"
INDEX { ledBladeIndex }
::= { bladeLEDsTable 1 }
BladeLEDsEntry ::= SEQUENCE {
ledBladeIndex INTEGER,
ledBladeId INTEGER,
ledBladeExists INTEGER,
ledBladePowerState INTEGER,
ledBladeHealthState INTEGER,
ledBladeName OCTET STRING,
ledBladeFault INTEGER,
ledBladeCheckLog INTEGER,
ledBladeIdentify INTEGER
}
ledBladeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade LED table index."
::= { bladeLEDsEntry 1 }
ledBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeLEDsEntry 2 }
ledBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the blade specified exists or not."
::= { bladeLEDsEntry 3 }
ledBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeLEDsEntry 4 }
ledBladeHealthState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
critical(3),
kernelMode(4),
discovering(5),
commError(6),
noPower(7),
flashing(8),
initFailure(9),
insufficientPower(10),
powerDenied(11),
maintMode(12),
firehoseDump(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system health state for the blade.
Unknown: Blade is in an undefined state.
Good: Blade is operating normally.
Warning: One or more outstanding warnings exist for this blade.
Critical: One or more outstanding critical events for this blade.
Kernel Mode: Blade is in kernel mode.
Discovering: The MM is currently in the process of discovering this blade.
Communications Error: The MM failed to communicate with this blade.
No Power: No power to the blade's domain.
Flashing: Flashing in progress.
Initialization Failure: Blade failed to initialized.
Insufficient Power: Not enough power is left in the blade's domain to power the blade.
Power Denied: Power was denied to the blade."
::= { bladeLEDsEntry 5 }
ledBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeLEDsEntry 6 }
ledBladeFault OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the blade fault LED is on or off."
::= { bladeLEDsEntry 7 }
ledBladeCheckLog OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the blade check log information LED is on or off.
For Write access, the LED can be turned off only."
::= { bladeLEDsEntry 8 }
ledBladeIdentify OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
blinking(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the blade identify LED is on, off, or blinking."
::= { bladeLEDsEntry 11 }
-- ********************************************************************************
-- Blade Detailed LEDs
-- ********************************************************************************
bladeLEDsDetailsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeLEDsDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade LEDs detailed information.
NOTE: Querying objects in this table may take significantly longer
than normal, so it is recommended that the query timeout be set to
a large value. On a fully populated chassis, the timeout should be set
to 120 seconds or more."
::= { bladeLEDs 2 }
bladeLEDsDetailsEntry OBJECT-TYPE
SYNTAX BladeLEDsDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade LEDs Details entry"
INDEX { ledIndex }
::= { bladeLEDsDetailsTable 1 }
BladeLEDsDetailsEntry ::= SEQUENCE {
ledIndex INTEGER,
ledBladeBayNumber OCTET STRING,
ledBladeComponentType OCTET STRING,
ledBladeLabel OCTET STRING,
ledBladeState INTEGER,
ledBladeLocation OCTET STRING
}
ledIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The LED index number."
::= { bladeLEDsDetailsEntry 1 }
ledBladeBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bay number of the main server blade that the LED is grouped into."
::= { bladeLEDsDetailsEntry 2 }
ledBladeComponentType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type of the component/subcomponent grouping for this LED."
::= { bladeLEDsDetailsEntry 3 }
ledBladeLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Text label for a LED."
::= { bladeLEDsDetailsEntry 4 }
ledBladeState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
blinking(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Text description which denotes color or on/off/blink state for a LED."
::= { bladeLEDsDetailsEntry 5 }
ledBladeLocation OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Location of this LED."
::= { bladeLEDsDetailsEntry 6 }
-- ********************************************************************************
-- Switch Module LEDs
-- ********************************************************************************
smLEDs OBJECT IDENTIFIER ::= { leds 4 }
smLEDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SMLEDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of switch module LEDs information."
::= { smLEDs 2 }
smLEDsEntry OBJECT-TYPE
SYNTAX SMLEDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module LEDs information entry"
INDEX { ledSMSlot, ledSMIndex }
::= { smLEDsTable 1 }
SMLEDsEntry ::= SEQUENCE {
ledSMIndex INTEGER,
ledSMSlot INTEGER,
ledSMLabel OCTET STRING,
ledSMState INTEGER,
ledSMLocation OCTET STRING
}
ledSMIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module LEDs table index."
::= { smLEDsEntry 1 }
ledSMSlot OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bay number of the switch."
::= { smLEDsEntry 2 }
ledSMLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name associated with the LED."
::= { smLEDsEntry 3 }
ledSMState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
blinking(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"NOTE: This table entry is read-write ONLY when Label = 'Enclosure Identity'.
All other Label values have read-only access."
::= { smLEDsEntry 4 }
ledSMLocation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical location where the LED can be found on the Switch."
::= { smLEDsEntry 5 }
-- ********************************************************************************
-- Chassis Fan LEDs
-- ********************************************************************************
chassisFanLEDs OBJECT IDENTIFIER ::= { leds 5 }
chassisFanLEDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChassisFanLEDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of chassis fan LEDs information."
::= { chassisFanLEDs 1 }
chassisFanLEDsEntry OBJECT-TYPE
SYNTAX ChassisFanLEDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis fan LEDs information entry"
INDEX { ledChassisFanIndex }
::= { chassisFanLEDsTable 1 }
ChassisFanLEDsEntry ::= SEQUENCE {
ledChassisFanIndex INTEGER,
ledChassisFanId INTEGER,
ledChassisFanExists INTEGER,
ledChassisFanError INTEGER
}
ledChassisFanIndex OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan LEDs table index."
::= { chassisFanLEDsEntry 1 }
ledChassisFanId OBJECT-TYPE
SYNTAX INTEGER {
chassisfan1(1),
chassisfan2(2),
chassisfan3(3),
chassisfan4(4),
chassisfan5(5),
chassisfan6(6),
chassisfan7(7),
chassisfan8(8),
chassisfan9(9),
chassisfan10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric chassis fan ID."
::= { chassisFanLEDsEntry 2 }
ledChassisFanExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the chassis fan specified exists or not."
::= { chassisFanLEDsEntry 3 }
ledChassisFanError OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
notAvailable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the chassis fan error LED is on, off, or not available."
::= { chassisFanLEDsEntry 4 }
-- ********************************************************************************
-- Power Module Fan Pack LEDs
-- ********************************************************************************
fanPackLEDs OBJECT IDENTIFIER ::= { leds 6 }
fanPackLEDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FanPackLEDsEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of fan pack LEDs information. This table is
deprecated because the LEDs for the power modules' fans
are no longer on the fan packs, the LEDs are on the
power modules.
See the MIB tables, componentLEDsTable and
componentLEDsDetailsTable, for the power modules' LEDs.
NOTE: Fan packs are also referred to as Power Module Cooling Devices."
::= { fanPackLEDs 1 }
fanPackLEDsEntry OBJECT-TYPE
SYNTAX FanPackLEDsEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Fan Pack LEDs information entry"
INDEX { ledFanPackIndex }
::= { fanPackLEDsTable 1 }
FanPackLEDsEntry ::= SEQUENCE {
ledFanPackIndex INTEGER,
ledFanPackId INTEGER,
ledFanPackExists INTEGER,
ledFanPackError INTEGER
}
ledFanPackIndex OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Fan Pack LEDs table index."
::= { fanPackLEDsEntry 1 }
ledFanPackId OBJECT-TYPE
SYNTAX INTEGER {
fanPack1(1),
fanPack2(2),
fanPack3(3),
fanPack4(4),
fanPack5(5),
fanPack6(6)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The numeric fan pack ID."
::= { fanPackLEDsEntry 2 }
ledFanPackExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the fan pack specified exists or not."
::= { fanPackLEDsEntry 3 }
ledFanPackError OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
notAvailable(2)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the fan pack error LED is on or off."
::= { fanPackLEDsEntry 4 }
-- ********************************************************************************
-- Power Management
-- ********************************************************************************
fuelGauge OBJECT IDENTIFIER ::= { monitors 10 }
-- ********************************************************************************
-- Fuel Gauge
-- ********************************************************************************
fuelGaugeInformation OBJECT IDENTIFIER ::= { fuelGauge 1 }
fuelGaugeTable OBJECT-TYPE
SYNTAX SEQUENCE OF FuelGaugeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Fuel Gauge information."
::= { fuelGaugeInformation 1 }
fuelGaugeEntry OBJECT-TYPE
SYNTAX FuelGaugeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Fuel Gauge entry"
INDEX { fuelGaugeIndex }
::= { fuelGaugeTable 1 }
FuelGaugeEntry ::= SEQUENCE {
fuelGaugeIndex INTEGER,
fuelGaugePowerDomainNumber INTEGER,
fuelGaugeStatus OCTET STRING,
fuelGaugePowerModules OCTET STRING,
fuelGaugePowerManagementPolicySetting INTEGER,
fuelGaugeTotalPower OCTET STRING,
fuelGaugeAllocatedPower OCTET STRING,
fuelGaugeRemainingPower OCTET STRING,
fuelGaugePowerInUsed OCTET STRING
}
fuelGaugeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fuel Gauge Table Index."
::= { fuelGaugeEntry 1 }
fuelGaugePowerDomainNumber OBJECT-TYPE
SYNTAX INTEGER {
powerDomain1(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fuel Gauge Table Power Domain Number."
::= { fuelGaugeEntry 2 }
fuelGaugeStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fuel Gauge Table Status for the power domain.
The response will start out with a numeric value (0 = unknown,
1 = good, 2 = warning, and 3: bad), followed by a text message."
::= { fuelGaugeEntry 3 }
fuelGaugePowerModules OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fuel Gauge Table Power Module capacity in Watts in the power domain."
::= { fuelGaugeEntry 4 }
fuelGaugePowerManagementPolicySetting OBJECT-TYPE
SYNTAX INTEGER {
power-module-redundancy(0),
power-module-redundancy-throttle(1),
basic(2),
power-source-redundancy(3),
power-source-redundancy-throttle(4),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Management Policy Setting for each power domain.
A new powerPolicyTable has been added which provides more detailed
information regarding a domains power policy information. This table
also has the capability to SET the power policy for a given domain.
Power Module Redundancy
Intended for a single power source into the chassis where each
Power Module is on its own dedicated circuit. Maximum power is
limited to one less than the number of Power Modules when more
than one Power Module is present. One Power Module can fail
without affecting compute node operation. Multiple Power Module
failures can cause the chassis to power off. Note that some compute
nodes may not be allowed to power on if doing so would exceed the
policy power limit.
Power Module Redundancy with Compute Nodes Throttling Allowed
Very similar to Power Module Redundancy. This policy allows for a
higher power limit; however, capable compute nodes may be allowed
to throttle down if one Power Module fails.
Basic Power Management
Maximum power limit is higher than other policies and is limited
only by the nameplate power of all the Power Modules combined.
This is the least conservative approach, since it does not provide
any protection for power source or Power Module failure. If any
single power supply fails, compute node and/or chassis operation
may be affected.
Power Source Redundancy
Intended for dual power sources into the chassis. Maximum power is
limited to the capacity of half the number of installed power modules.
This is the most conservative approach and is recommended when all power
modules are installed. When the chassis is correctly wired with dual
power sources, one power source can fail without affecting compute
node server operation. Note that some compute nodes may not be allowed
to power on if doing so would exceed the policy power limit.
Power Source Redundancy with Compute Node Throttling Allowed
Very similar to the Power Source Redundancy. This policy allows
for a higher power limit, however capable compute nodes may be allowed
to throttle down if one power source fails."
::= { fuelGaugeEntry 6 }
fuelGaugeTotalPower OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field displays the total available power for each power domain based on
installed power modules and the current Power Management Policy Setting."
::= { fuelGaugeEntry 7 }
fuelGaugeAllocatedPower OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field displays the power that has been reserved in each power domain."
::= { fuelGaugeEntry 8 }
fuelGaugeRemainingPower OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field displays the remaining power available in each domain.
Remaining Power = Total Power minus Power In Use"
::= { fuelGaugeEntry 9 }
fuelGaugePowerInUsed OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field displays the total power being used in each power domain."
::= { fuelGaugeEntry 10 }
-- ********************************************************************************
-- Power Domain
-- ********************************************************************************
powerDomain1 OBJECT IDENTIFIER ::= { fuelGauge 2 }
powerDomain1Table OBJECT-TYPE
SYNTAX SEQUENCE OF PowerDomain1Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Power Domain 1."
::= { powerDomain1 1}
powerDomain1Entry OBJECT-TYPE
SYNTAX PowerDomain1Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Fuel Gauge entry"
INDEX { pd1Index }
::= { powerDomain1Table 1 }
PowerDomain1Entry ::= SEQUENCE {
pd1Index INTEGER,
pd1BayNumber OCTET STRING,
pd1BladePrimarySlot INTEGER,
pd1ModuleStatus INTEGER,
pd1ModuleName OCTET STRING,
pd1ModuleState INTEGER,
pd1ModuleAllocatedPowerCurrent OCTET STRING,
pd1ModuleAllocatedPowerMax OCTET STRING,
pd1ModuleAllocatedPowerMin OCTET STRING,
pd1ModuleCPUDutyCycles OCTET STRING,
pd1ModuleThrottle INTEGER,
pd1ModulePowerCapabilities INTEGER,
pd1ModuleMeasuredOrStatic INTEGER,
pd1TopologyPath OCTET STRING
}
pd1Index OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Index."
::= { powerDomain1Entry 1 }
pd1BayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Bay Number.
The following Bay Number IDs are used:
notApplicable(1),
notApplicable(2),
fanPackBay1(3),
fanPackBay2(4),
fanPackBay3(5),
fanPackBay4(6),
fanPackBay5(7),
fanPackBay6(8),
chassisfanBay1(9),
chassisfanBay2(10),
chassisfanBay3(11),
chassisfanBay4(12),
chassisfanBay5(13),
chassisfanBay6(14),
chassisfanBay7(15),
chassisfanBay8(16),
chassisfanBay9(17),
chassisfanBay10(18),
managementModuleBay1(19),
managementModuleBay2(20),
ioModuleBay1(21),
ioModuleBay2(22),
ioModuleBay3(23),
ioModuleBay4(24),
serverBladeBay1(25),
serverBladeBay2(26),
serverBladeBay3(27),
serverBladeBay4(28),
serverBladeBay5(29),
serverBladeBay6(30),
serverBladeBay7(31),
serverBladeBay8(32),
serverBladeBay9(33),
serverBladeBay10(34),
serverBladeBay11(35),
serverBladeBay12(36),
serverBladeBay13(37),
serverBladeBay14(38),
notApplicable(39)"
::= { powerDomain1Entry 2 }
pd1BladePrimarySlot OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Blade Primary Slot can be useful
when a server blade spans multiple slots (e.g. double wide or
triple wide). For example if the blade is double wide and
is installed in slot 3 and 4. 3 is primary slot while 4 is not."
::= { powerDomain1Entry 3 }
pd1ModuleStatus OBJECT-TYPE
SYNTAX INTEGER {
insufficientPower(0),
moduleIsThrottling(1),
moduleNotThrottling(2),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Module Throttle Status."
::= { powerDomain1Entry 4 }
pd1ModuleName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Module Name."
::= { powerDomain1Entry 5 }
pd1ModuleState OBJECT-TYPE
SYNTAX INTEGER {
standby(0),
on(1),
notPresent(2),
off(3),
hibernate(4),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Module State."
::= { powerDomain1Entry 6 }
pd1ModuleAllocatedPowerCurrent OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Allocated Power Current indicates the current power
allocation for the module in Watts.
NOTE: When a server blade spans multiple slots (e.g. double wide or
triple wide), the current power allocation for the module is equally
divided among the slots."
::= { powerDomain1Entry 7 }
pd1ModuleAllocatedPowerMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Allocated Power Max indicates the maximum power
allocation for the module in Watts. It is indicative of the maximum
amount of power the module will consume in the domain when it is
fully populated with memory chips, expansion cards, etc.
NOTE: When a server blade spans multiple slots (e.g. double wide or
triple wide), the maximum power allocation for the module is equally
divided among the slots."
::= { powerDomain1Entry 8 }
pd1ModuleAllocatedPowerMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Allocated Power Min indicates the minumum power
allocation for the module in Watts. It is indicative of the minumum
power consumption of the component in the domain based on its
maximum throttle limit.
NOTE: When a server blade spans multiple slots (e.g. double wide or
triple wide), the minimum power allocation for the module is equally
divided among the slots."
::= { powerDomain1Entry 9 }
pd1ModuleCPUDutyCycles OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Module CPUs Duty Cycles applies to blade
servers only. It displays the duty cycle for each CPU on the blade
as a percentage. Note that some blades do not report the CPU
duty cycles. In this case, 'notApplicable' will be displayed.
NOTE: The CPU duty cycles are reported only on a primary slot when
a server blade spans multiple slots (e.g. double wide or
triple wide). For example if the blade is double wide and
is installed in slot 3 and 4. 3 is primary slot while 4 is not.
The CPU duty cycles are reported on slot 3 while 'notApplicable'
is displayed for slot 4."
::= { powerDomain1Entry 10 }
pd1ModuleThrottle OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Module Throttle indicates whether the
server blade may be allowed to throttle or not."
::= { powerDomain1Entry 11 }
pd1ModulePowerCapabilities OBJECT-TYPE
SYNTAX INTEGER {
noAbility(0),
staticPowerManagement(1),
fixedPowerManagement(2),
dynamicPowerManagement(3),
dynamicPowerMeasurement1(4),
dynamicPowerMeasurement2(5),
dynamicPowerMeasurementWithPowerCapping(6),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Module Power Capabilities.
staticPowerManagement: the module with the static worst
case power values.
fixedPowermanagement: the module with the static power values but
ability to throttle.
dynamicPowerManagement: the module with power meter capability,
measurement enabled, but capping disabled.
dynamicPowerMeasurement1: the module with power meter capability,
measurement enabled, phase 1 only
dynamicPowerMeasurement2: the module with power meter capability,
measurement enabled, phase 2 or higher
dynamicPowerMeasurementWithPowerCapping: the module with power
meter capability, both measurement and capping enabled,
phase 2 or higher"
::= { powerDomain1Entry 12 }
pd1ModuleMeasuredOrStatic OBJECT-TYPE
SYNTAX INTEGER {
static(0),
measured(1),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Table Module Measured Or Static."
::= { powerDomain1Entry 13 }
pd1TopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The topology path for the component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { powerDomain1Entry 14 }
-- ********************************************************************************
-- Power Domain Power Trending
-- ********************************************************************************
powerDomain1PowerTrending OBJECT IDENTIFIER ::= { powerDomain1 3 }
pd1PowerTrendingPeriod OBJECT-TYPE
SYNTAX INTEGER {
lastHour(0),
last6Hours(1),
last12Hours(2),
last24Hours(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify time period for power domain 1 power trending information
table view.
NOTE: This time period should be configured before displaying the
following Power Trending Information table for Power Domain."
::= { powerDomain1PowerTrending 1 }
-- ********************************************************************************
-- Power Domain Power Trending Table
-- ********************************************************************************
pd1PowerTrendingSampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pd1PowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Power Domain 1 Power Trending Information."
::= { powerDomain1PowerTrending 10 }
pd1PowerTrendingSampleEntry OBJECT-TYPE
SYNTAX Pd1PowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Power Domain 1 Power Trending Sample entry."
INDEX { pd1PowerTrendingSampleIndex }
::= { pd1PowerTrendingSampleTable 1 }
Pd1PowerTrendingSampleEntry ::= SEQUENCE {
pd1PowerTrendingSampleIndex INTEGER,
pd1PowerTrendingSampleTimeStamp OCTET STRING,
pd1PowerTrendingSampleAve OCTET STRING
}
pd1PowerTrendingSampleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Power Trending Sample Table Index."
::= { pd1PowerTrendingSampleEntry 1 }
pd1PowerTrendingSampleTimeStamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Power Trending Sample Table Timestamp."
::= { pd1PowerTrendingSampleEntry 2 }
pd1PowerTrendingSampleAve OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Domain 1 Power Trending Table Average Power."
::= { pd1PowerTrendingSampleEntry 3 }
-- ******************************************************************************
-- Power Mgmt Module Information
-- ******************************************************************************
moduleInformation OBJECT IDENTIFIER ::= { fuelGauge 4 }
bladeDetails OBJECT IDENTIFIER ::= { moduleInformation 1 }
bladeDetailsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Blade Module Details."
::= { bladeDetails 1}
bladeDetailsEntry OBJECT-TYPE
SYNTAX BladeDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade Module Details entry."
INDEX { bladeDetailsIndex }
::= { bladeDetailsTable 1 }
BladeDetailsEntry ::= SEQUENCE {
bladeDetailsIndex INTEGER,
bladeDetailsId INTEGER,
bladeDetailsMaxPowerConfig INTEGER,
bladeDetailsEffectiveClockRate OCTET STRING,
bladeDetailsMaximumClockRate OCTET STRING,
bladeDetailsPowerSaverMode INTEGER,
bladeDetailsDynamicPowerSaver INTEGER,
bladeDetailsDynamicPowerFavorPerformanceOverPower INTEGER,
bladeDetailsPowerControl INTEGER,
bladeDetailsPcapMin OCTET STRING,
bladeDetailsPcapGuaranteedMin OCTET STRING,
bladeDetailsPcapMax OCTET STRING
}
bladeDetailsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Details Table Index."
::= { bladeDetailsEntry 1 }
bladeDetailsId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Details Table Blade Id."
::= { bladeDetailsEntry 2 }
bladeDetailsMaxPowerConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade Module Details Table Maximum Power Configuration.
Allow the user to set the maximum power that can be used by the blade. This
function is also known as power capping.
Blade must be powered on to set this value.
If the value of maximum power config is zero, it means the blade doesn't
support the power capping feature"
::= { bladeDetailsEntry 3 }
bladeDetailsEffectiveClockRate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Details Table Effective CPU Clock Rate applies to DPM
blades only. It displays processor's effective clock rate based
on sample interval. Note that some blades do not effective
clock rate. In this case, 'notApplicable' will be displayed.
NOTE: The effective clock rate are reported only on a primary slot when
a server blade spans multiple slots (e.g. double wide or
triple wide). For example if the blade is double wide and
is installed in slot 3 and 4. 3 is primary slot while 4 is not.
The effective clock rate are reported on slot 3 while 'notApplicable'
is displayed for slot 4."
::= { bladeDetailsEntry 4 }
bladeDetailsMaximumClockRate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Details Table Maximum CPU Clock Rate applies to DPM
blades only. It displays processor's maximum clock rate based
on sample interval. Note that some blades do not maximum
clock rate. In this case, 'notApplicable' will be displayed.
NOTE: The maximum clock rate are reported only on a primary slot when
a server blade spans multiple slots (e.g. double wide or
triple wide). For example if the blade is double wide and
is installed in slot 3 and 4. 3 is primary slot while 4 is not.
The maximum clock rate are reported on slot 3 while 'notApplicable'
is displayed for slot 4."
::= { bladeDetailsEntry 5 }
bladeDetailsPowerSaverMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, the static low power saver mode allows the blade to selectively
alter its operating voltage and frequency to reduce power consumption.
This feature is not available on all blade types. Please refer to the blade documentation for details.
If a blade does not support the static low power saver mode, this object will return notApplicable (255).
Under certain rare circumstances, the enabling of the static low power saver mode
may not complete successfully due to interactions with other
blade functions, such as BIOS. Therefore, it is highly recommended that
the user perform a GET of this object after performing a SET, in order
to verify the completion of the intended operation.
NOTE: enabling this object will disable bladeDetailsDynamicPowerSaver if its not already disabled."
::= { bladeDetailsEntry 6 }
bladeDetailsDynamicPowerSaver OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, Dynamic Power Saver allows the voltage and frequency of the CPUs on the blade
to be controlled based on how busy the CPU is. This feature is not available on all blade types.
Please refer to the blade documentation for details. If a blade does not support the dynamic power
saver, this object will return notApplicable (255).
Under certain rare circumstances, the enabling of the dynamic power saver may not complete
successfully due to interactions with other blade functions, such as BIOS. Therefore, it is
highly recommended that the user perform a GET of this object after performing a SET, in order
to verify the completion of the intended operation.
NOTE: enabling this object will disable bladeDetailsPowerSaverMode if its not already disabled."
::= { bladeDetailsEntry 7 }
bladeDetailsDynamicPowerFavorPerformanceOverPower OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the
system past its nominal CPU frequency when CPU and memory utilization implies it would help and the
system allows it. Dynamic Power Performance Over Power can be active on the blade only after Dynamic
Power Saver is enabled. This feature is not available on all blade types. Please refer to the
blade documentation for details. If a blade does not support the dynamic power saver, this object
will return notApplicable (255).
Under certain rare circumstances, the enabling of the dynamic power favor performance over power
may not complete successfully due to interactions with other blade functions, such as BIOS.
Therefore, it is highly recommended that the user perform a GET of this object after performing a SET,
in order to verify the completion of the intended operation."
::= { bladeDetailsEntry 8 }
bladeDetailsPowerControl OBJECT-TYPE
SYNTAX INTEGER {
none(0),
measurement(1),
measurementpcap(2),
psave(3),
measurementpsave(4),
measurementpcappsave(5),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to get or set the power control setting on a blade.
If dynamic power mgmt is not supported on a blade, notApplicable(255) will be returned.
This will set the power control setting on all slots of the multiwide blade. The
same can be used if the blade is single wide."
::= { bladeDetailsEntry 9 }
bladeDetailsPcapMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Details Table power capping Minimum value in watts.
The blade must support the advanced power management feature.
If the value of Pcap Min is 'notApplicable', it means the blade doesn't
support the power capping feature.
If the value of Pcap Min is 'notAvailable', it means the data
could not be obtained."
::= { bladeDetailsEntry 10 }
bladeDetailsPcapGuaranteedMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Details Table power capping Guaranteed Minimum value in watts.
The blade must support the advanced power management feature.
If the value of Pcap Guaranteed Min is 'notApplicable', it means the blade doesn't
support the power capping feature.
If the value of Pcap GuaranteedMin is 'notAvailable', it means the data
could not be obtained."
::= { bladeDetailsEntry 11 }
bladeDetailsPcapMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Details Table power capping Maximum value in watts.
The blade must support the advanced power management feature.
If the value is '<max1> Watts,<max2> Watts', which means,
- if bladeDetailsDynamicPowerSaver is enabled, it is <max2>
- otherwise it is <max1>
If the value of Pcap Max is 'notApplicable', it means the blade doesn't
support the power capping feature.
If the value of Pcap Min is 'notAvailable', it means the data
could not be obtained."
::= { bladeDetailsEntry 12 }
-- ******************************************************************************
-- Power Mgmt Blade Power Trending
-- ******************************************************************************
bladePowerTrending OBJECT IDENTIFIER ::= { bladeDetails 3 }
bladePowerTrendingPeriod OBJECT-TYPE
SYNTAX INTEGER {
lastHour(0),
last6Hours(1),
last12Hours(2),
last24Hours(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify time period for blade module power trending information table view.
NOTE: This time period should be configured before displaying the
following Power Trending Information table for Blade Module.
Since the power trending data is constantly being computed and saved in the
management application database, some queries of the bladePowerTrendingSampleTable
may not provide information for a very short window of time.
If the table returns empty, please wait a short period and retry the query."
::= { bladePowerTrending 1 }
bladePowerTrendingBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade Module Power Trending Blade Id.
NOTE: The Blade Id should be configured before displaying the
bladePowerTrendingTable."
::= { bladePowerTrending 2 }
bladePowerTrendingTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The topology Path is a location identifier for a blade. The chassis and each
installed blade is represented by a hardware topology tree, where
each node in the tree represents a blade. The path to a particular
blade consists of one or more <blade>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
This topology path is used to identify blades such as blade storage devices.
Some examples. A storage blade with a controller card plugged into slot 1
topology location would be represented as :
010103010301--> Storage Controller card #1 of Sub-Chassis #1
A storage blade with a controller card plugged into slot 2
topology location would be represented as :
010103010302--> Storage Controller card #2 of Sub-Chassis #1 "
::= { bladePowerTrending 3 }
-- ******************************************************************************
-- Power Mgmt Blade Power Trending Table
-- ******************************************************************************
bladePowerTrendingSampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladePowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Blade Module Power Trending Information.
Since the power trending data is constantly being computed and saved in the
management application database, some queries of this table may not provide
information for a very short window of time.
If the table data returns empty,please wait a short period and retry the query."
::= { bladePowerTrending 10 }
bladePowerTrendingSampleEntry OBJECT-TYPE
SYNTAX BladePowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade Module Power Trending Sample entry."
INDEX { bladePowerTrendingSampleIndex }
::= { bladePowerTrendingSampleTable 1 }
BladePowerTrendingSampleEntry ::= SEQUENCE {
bladePowerTrendingSampleIndex INTEGER,
bladePowerTrendingSampleId INTEGER,
bladePowerTrendingSampleTimeStamp OCTET STRING,
bladePowerTrendingSampleMax OCTET STRING,
bladePowerTrendingSampleMin OCTET STRING,
bladePowerTrendingSampleAve OCTET STRING,
bladePowerTrendingSampleTopologyId OCTET STRING
}
bladePowerTrendingSampleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Power Trending Sample Table Index."
::= { bladePowerTrendingSampleEntry 1 }
bladePowerTrendingSampleId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Power Trending Sample Table Blade Id.
If the blade is defined using a topology location
by using the scalar bladePowerTrendingTopologyPath, a
zero will be displayed in the bladePowerTrendingSampleId."
::= { bladePowerTrendingSampleEntry 2 }
bladePowerTrendingSampleTimeStamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Power Trending Sample Table Timestamp."
::= { bladePowerTrendingSampleEntry 3 }
bladePowerTrendingSampleMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Power Trending Sample Table Maximum Power."
::= { bladePowerTrendingSampleEntry 4 }
bladePowerTrendingSampleMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Power Trending Sample Table Minimum Power."
::= { bladePowerTrendingSampleEntry 5 }
bladePowerTrendingSampleAve OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade Module Power Trending Sample Table Average Power."
::= { bladePowerTrendingSampleEntry 6 }
bladePowerTrendingSampleTopologyId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade module topology path. This field will have a
topology location when a blade is a storage blade or
a blade defined with a sub chassis. If the blade is defined
with a primary slot location by using the scalar
bladePowerTrendingBladeId, 'not applicable' will be
displayed in the bladePowerTrendingSampleTopologyId."
::= { bladePowerTrendingSampleEntry 7 }
-- ******************************************************************************
-- Power Mgmt Switch Power Trending
-- ******************************************************************************
switchDetails OBJECT IDENTIFIER ::= { moduleInformation 2 }
switchPowerTrending OBJECT IDENTIFIER ::= { switchDetails 3 }
switchPowerTrendingPeriod OBJECT-TYPE
SYNTAX INTEGER {
lastHour(0),
last6Hours(1),
last12Hours(2),
last24Hours(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify time period for switch module power trending information table view.
NOTE: This time period should be configured before displaying the
following Power Trending Information table for Switch Module."
::= { switchPowerTrending 1 }
switchPowerTrendingSwitchId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Switch Module Power Trending Switch Id.
NOTE: The Switch Id should be configured before displaying the
switchPowerTrendingTable."
::= { switchPowerTrending 2 }
-- ******************************************************************************
-- Power Mgmt Switch Power Trending Table
-- ******************************************************************************
switchPowerTrendingSampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchPowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Switch Module Power Trending Information."
::= { switchPowerTrending 10 }
switchPowerTrendingSampleEntry OBJECT-TYPE
SYNTAX SwitchPowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module Power Trending Sample entry."
INDEX { switchPowerTrendingSampleIndex }
::= { switchPowerTrendingSampleTable 1 }
SwitchPowerTrendingSampleEntry ::= SEQUENCE {
switchPowerTrendingSampleIndex INTEGER,
switchPowerTrendingSampleId INTEGER,
switchPowerTrendingSampleTimeStamp OCTET STRING,
switchPowerTrendingSampleMax OCTET STRING,
switchPowerTrendingSampleMin OCTET STRING,
switchPowerTrendingSampleAve OCTET STRING
}
switchPowerTrendingSampleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module Power Trending Sample Table Index."
::= { switchPowerTrendingSampleEntry 1 }
switchPowerTrendingSampleId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4),
module5(5),
module6(6),
module7(7),
module8(8),
module9(9),
module10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module Power Trending Sample Table Switch Id."
::= { switchPowerTrendingSampleEntry 2 }
switchPowerTrendingSampleTimeStamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module Power Trending Sample Table Timestamp."
::= { switchPowerTrendingSampleEntry 3 }
switchPowerTrendingSampleMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module Power Trending Sample Table Maximum Power."
::= { switchPowerTrendingSampleEntry 4 }
switchPowerTrendingSampleMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module Power Trending Sample Table Minimum Power."
::= { switchPowerTrendingSampleEntry 5 }
switchPowerTrendingSampleAve OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module Power Trending Sample Table Average Power."
::= { switchPowerTrendingSampleEntry 6 }
-- ******************************************************************************
-- Power Mgmt Chassis Fans Power Trending
-- ******************************************************************************
chassisFanDetails OBJECT IDENTIFIER ::= { moduleInformation 3 }
chassisFanPowerTrending OBJECT IDENTIFIER ::= { chassisFanDetails 3 }
chassisFanPowerTrendingPeriod OBJECT-TYPE
SYNTAX INTEGER {
lastHour(0),
last6Hours(1),
last12Hours(2),
last24Hours(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify time period for chassis fan module power trending information table view.
NOTE: This time period should be configured before displaying the
following Power Trending Information table for chassis fan module."
::= { chassisFanPowerTrending 1 }
chassisFanPowerTrendingId OBJECT-TYPE
SYNTAX INTEGER {
chassisFan1(1),
chassisFan2(2),
chassisFan3(3),
chassisFan4(4),
chassisFan5(5),
chassisFan6(6),
chassisFan7(7),
chassisFan8(8),
chassisFan9(9),
chassisFan10(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Chass fan mModule power trending fan ID.
NOTE: The ID should be configured before displaying the chassisFanPowerTrendingTable."
::= { chassisFanPowerTrending 2 }
-- ******************************************************************************
-- Power Mgmt Chassis Fans Power Trending Table
-- ******************************************************************************
chassisFanPowerTrendingSampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChassisFanPowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of chassis fan Module Power Trending Information."
::= { chassisFanPowerTrending 10 }
chassisFanPowerTrendingSampleEntry OBJECT-TYPE
SYNTAX ChassisFanPowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis fan Module Power Trending Sample entry."
INDEX { chassisFanPowerTrendingSampleIndex }
::= { chassisFanPowerTrendingSampleTable 1 }
ChassisFanPowerTrendingSampleEntry ::= SEQUENCE {
chassisFanPowerTrendingSampleIndex INTEGER,
chassisFanPowerTrendingSampleId INTEGER,
chassisFanPowerTrendingSampleTimeStamp OCTET STRING,
chassisFanPowerTrendingSampleMax OCTET STRING,
chassisFanPowerTrendingSampleMin OCTET STRING,
chassisFanPowerTrendingSampleAve OCTET STRING
}
chassisFanPowerTrendingSampleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan Module Power Trending Sample Table Index."
::= { chassisFanPowerTrendingSampleEntry 1 }
chassisFanPowerTrendingSampleId OBJECT-TYPE
SYNTAX INTEGER {
chassisFan1(1),
chassisFan2(2),
chassisFan3(3),
chassisFan4(4),
chassisFan5(5),
chassisFan6(6),
chassisFan7(7),
chassisFan8(8),
chassisFan9(9),
chassisFan10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan Module Power Trending Sample Table Id."
::= { chassisFanPowerTrendingSampleEntry 2 }
chassisFanPowerTrendingSampleTimeStamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan Module Power Trending Sample Table Timestamp."
::= { chassisFanPowerTrendingSampleEntry 3 }
chassisFanPowerTrendingSampleMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan Module Power Trending Sample Table Maximum Power."
::= { chassisFanPowerTrendingSampleEntry 4 }
chassisFanPowerTrendingSampleMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan Module Power Trending Sample Table Minimum Power."
::= { chassisFanPowerTrendingSampleEntry 5 }
chassisFanPowerTrendingSampleAve OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis fan Module Power Trending Sample Table Average Power."
::= { chassisFanPowerTrendingSampleEntry 6 }
-- ******************************************************************************
-- Chassis Global Information
-- ******************************************************************************
chassisInformation OBJECT IDENTIFIER ::= { fuelGauge 5 }
chassisConfiguration OBJECT IDENTIFIER ::= { chassisInformation 1 }
chassisTotalDCPowerAvailable OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis total DC power available, which displays the total DC power available
for the entire chassis. It is the sum of the two power domains."
::= { chassisConfiguration 1 }
chassisTotalPowerInUsed OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis total power being used, which displays the total power
being consumed by all modules in the chassis. It also includes power
consumed by the blowers (chassis cooling devices) for the chassis."
::= { chassisConfiguration 2 }
chassisTotalThermalOutput OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis total thermal output, which displays the thermal output
(load) in BTUs per hour. It is calculated based on the total input
power in use. (1 Watt = 3.412 BTU/hour)."
::= { chassisConfiguration 3 }
chassisPowerService OBJECT-TYPE
SYNTAX INTEGER {
volt110(1),
volt220(2),
notAvailable(255)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The chassis power service mode.
NOTE: This MIB object is for BCS only.
This object has been deprecated. See the object,
powerModuleDescription, for similar information."
::= { chassisConfiguration 5 }
-- ******************************************************************************
-- Chassis Power Trending Information
-- ******************************************************************************
chassisPowerTrending OBJECT IDENTIFIER ::= { chassisInformation 3 }
chassisPowerTrendingPeriod OBJECT-TYPE
SYNTAX INTEGER {
lastHour(0),
last6Hours(1),
last12Hours(2),
last24Hours(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify time period of power trending information.
NOTE: This time period should be configured before displaying the
following Power Trending Information table for Chassis."
::= { chassisPowerTrending 1 }
chassisPowerTrendingSampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChassisPowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Chassis Power Trending Sample Information in specified time period."
::= { chassisPowerTrending 10 }
chassisPowerTrendingSampleEntry OBJECT-TYPE
SYNTAX ChassisPowerTrendingSampleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis Power Trending Sample entry in specified time period."
INDEX { chassisPowerTrendingSampleIndex }
::= { chassisPowerTrendingSampleTable 1 }
ChassisPowerTrendingSampleEntry ::= SEQUENCE {
chassisPowerTrendingSampleIndex INTEGER,
chassisPowerTrendingSampleTimeStamp OCTET STRING,
chassisPowerTrendingSampleAve OCTET STRING
}
chassisPowerTrendingSampleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Power Trending Sample Index in specified time period."
::= { chassisPowerTrendingSampleEntry 1 }
chassisPowerTrendingSampleTimeStamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Power Trending Sample Timestamp in specified time period."
::= { chassisPowerTrendingSampleEntry 2 }
chassisPowerTrendingSampleAve OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Power Trending Sample Average Power in specified time period."
::= { chassisPowerTrendingSampleEntry 3 }
-- ******************************************************************************
-- Chassis Thermal Trending Information
-- ******************************************************************************
chassisThermalTrending OBJECT IDENTIFIER ::= { chassisInformation 5 }
chassisThermalTrendingPeriod OBJECT-TYPE
SYNTAX INTEGER {
lastHour(0),
last6Hours(1),
last12Hours(2),
last24Hours(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify time period of thermal trending information.
NOTE: This time period should be configured before displaying the
following Thermal Trending Information table for Chassis."
::= { chassisThermalTrending 1 }
rearLEDCardThermalTrendingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RearLEDCardThermalTrendingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of rear LED card Thermal Trending Information."
::= { chassisThermalTrending 10 }
rearLEDCardThermalTrendingEntry OBJECT-TYPE
SYNTAX RearLEDCardThermalTrendingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Rear LED Card Thermal Trending entry."
INDEX { rearLEDCardThermalTrendingIndex }
::= { rearLEDCardThermalTrendingTable 1 }
RearLEDCardThermalTrendingEntry ::= SEQUENCE {
rearLEDCardThermalTrendingIndex INTEGER,
rearLEDCardThermalTrendingTimeStamp OCTET STRING,
rearLEDCardThermalTrendingTemperatureAvg OCTET STRING,
rearLEDCardThermalTrendingTemperatureMin OCTET STRING,
rearLEDCardThermalTrendingTemperatureMax OCTET STRING
}
rearLEDCardThermalTrendingIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rear LED Card Thermal Trending Table Index."
::= { rearLEDCardThermalTrendingEntry 1 }
rearLEDCardThermalTrendingTimeStamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rear LED Card Thermal Trending Table Sample Timestamp."
::= { rearLEDCardThermalTrendingEntry 2 }
rearLEDCardThermalTrendingTemperatureAvg OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rear LED Card Thermal Trending Table Average Temperature."
::= { rearLEDCardThermalTrendingEntry 3 }
rearLEDCardThermalTrendingTemperatureMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rear LED Card Thermal Trending Table Minumum Temperature."
::= { rearLEDCardThermalTrendingEntry 4 }
rearLEDCardThermalTrendingTemperatureMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rear LED Card Thermal Trending Table Maximum Temperature."
::= { rearLEDCardThermalTrendingEntry 5 }
-- ******************************************************************************
-- Chassis Mgmt Cubic Feet per Minute Thermal Trending Table
-- ******************************************************************************
cfmThermalTrendingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfmThermalTrendingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Cubic Feet per Minute Thermal Trending Information."
::= { chassisThermalTrending 60 }
cfmThermalTrendingEntry OBJECT-TYPE
SYNTAX CfmThermalTrendingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis CFM Thermal Trending entry."
INDEX { cfmThermalTrendingIndex }
::= { cfmThermalTrendingTable 1 }
CfmThermalTrendingEntry ::= SEQUENCE {
cfmThermalTrendingIndex INTEGER,
cfmThermalTrendingTimeStamp OCTET STRING,
cfmThermalTrendingCurrentCFM OCTET STRING,
cfmThermalTrendingMaxCFM OCTET STRING
}
cfmThermalTrendingIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cubic Feet per Minute Thermal Trending Table Index."
::= { cfmThermalTrendingEntry 1 }
cfmThermalTrendingTimeStamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cubic Feet per Minute Thermal Trending Table Sample Timestamp."
::= { cfmThermalTrendingEntry 2 }
cfmThermalTrendingCurrentCFM OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cubic Feet per Minute Thermal Trending Table
The Current CFM of air flow calculated at this sample time."
::= { cfmThermalTrendingEntry 3 }
cfmThermalTrendingMaxCFM OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cubic Feet per Minute Thermal Trending Table
The Maximum CFM of air flow the chassis can provide
at this sample time."
::= { cfmThermalTrendingEntry 4 }
-- ******************************************************************************
-- Chassis Mgmt Exhaust Heat Index Thermal Trending Table
-- ******************************************************************************
ehiThermalTrendingTable OBJECT-TYPE
SYNTAX SEQUENCE OF EhiThermalTrendingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Exhaust Heat Index Thermal Trending Information."
::= { chassisThermalTrending 70 }
ehiThermalTrendingEntry OBJECT-TYPE
SYNTAX EhiThermalTrendingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis Exhaust Heat Index Thermal Trending entry."
INDEX { ehiThermalTrendingIndex }
::= { ehiThermalTrendingTable 1 }
EhiThermalTrendingEntry ::= SEQUENCE {
ehiThermalTrendingIndex INTEGER,
ehiThermalTrendingTimeStamp OCTET STRING,
ehiThermalTrendingMinEHI OCTET STRING,
ehiThermalTrendingMaxEHI OCTET STRING,
ehiThermalTrendingAvgEHI OCTET STRING
}
ehiThermalTrendingIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Exhaust Heat Index Thermal Trending Table Index."
::= { ehiThermalTrendingEntry 1 }
ehiThermalTrendingTimeStamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Exhaust Heat Index Thermal Trending Table Sample Timestamp."
::= { ehiThermalTrendingEntry 2 }
ehiThermalTrendingMinEHI OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Exhaust Heat Index Thermal Trending Table
Minimum Exhaust Heat Index since last reboot."
::= { ehiThermalTrendingEntry 3 }
ehiThermalTrendingMaxEHI OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Exhaust Heat Index Thermal Trending Table
Maximum Exhaust Heat Index since last reboot."
::= { ehiThermalTrendingEntry 4 }
ehiThermalTrendingAvgEHI OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Exhaust Heat Index Thermal Trending Table
Average of last 2 Exhaust Heat Index calculations since
last reboot."
::= { ehiThermalTrendingEntry 5 }
-- ********************************************************************************
-- Power Policy Table
-- ********************************************************************************
powerPolicyInformation OBJECT IDENTIFIER ::= { fuelGauge 6 }
powerPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF PowerPolicyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Power Policy information for all power domains. Reading this
table can tell you about the available power policies that can be
configured for a domain and also which is currently selected. The
powerPolicyActivate object can also be SET to select which policy
should be active for a given power domain."
::= { powerPolicyInformation 1 }
powerPolicyEntry OBJECT-TYPE
SYNTAX PowerPolicyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Power Policy Entry"
INDEX { powerPolicyIndex }
::= { powerPolicyTable 1 }
PowerPolicyEntry ::= SEQUENCE {
powerPolicyIndex INTEGER,
powerPolicyPowerDomainNumber INTEGER,
powerPolicyName OCTET STRING,
powerPolicyPwrSupplyFailureLimit INTEGER,
powerPolicyMaxPowerLimit INTEGER,
powerPolicyEstimatedUtilization INTEGER,
powerPolicyActivate INTEGER
}
powerPolicyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique idenitifier of a row in the powerPolicyTable."
::= { powerPolicyEntry 1 }
powerPolicyPowerDomainNumber OBJECT-TYPE
SYNTAX INTEGER {
powerDomain1(1),
powerDomain2(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power domain number which this row is associated with."
::= { powerPolicyEntry 2 }
powerPolicyName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The short name of the power policy. The following are the possible
names and their detailed description:
Power Module Redundancy
Intended for a single power source into the chassis
where each Power Module is on its own dedicated circuit.
Total allowed power draw is limited to one less than the
number of Power Modules when more than one Power Module is
present. One Power Module can fail without affecting blade
operation. Multiple Power Module failures can cause
the chassis to power off. Note that some blades may not be
allowed to power on if doing so would exceed the policy power
limit.
Power Module Redundancy with Blade Throttling Allowed
Very similar to the Power Module Redundancy policy. This
policy allows you to draw more total power; however, capable
blades may be allowed to throttle down if one Power Module fails.
Basic Power Management
Total allowed power is higher than other policies and is limited only
by the total power capacity of all the Power Modules up to the maximum
of chassis power rating. This is the least conservative approach, since
it does not provide any protection for power source or Power Module
failure. If any single power supply fails, blade and/or chassis
operation may be affected.
Power Source Redundancy
Intended for dual power sources into the chassis. Total
allowed power draw is limited to the capacity of two Power
Modules. This is the most conservative approach and is
recommended when all four Power Modules are installed.
When the chassis is correctly wired with dual power
sources, one power source can fail without affecting
blade operation. Note that some blades may not be
allowed to power on if doing so would exceed the policy
power limit.
Power Source Redundancy with Blade Throttling Allowed
Very similar to the Power Source Redundancy policy. This policy
allows you to draw more total power; however, capable blades
may be allowed to throttle down if one power source fails."
::= { powerPolicyEntry 3 }
powerPolicyPwrSupplyFailureLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of power supplies that can fail in a chassis
while still providing redundancy."
::= { powerPolicyEntry 4 }
powerPolicyMaxPowerLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum power available (in watts), based on the number of power modules and
the Power Management Policy setting."
::= { powerPolicyEntry 5 }
powerPolicyEstimatedUtilization OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The estimated utilization (as a percentage) based on current power usage."
::= { powerPolicyEntry 6 }
powerPolicyActivate OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When read, this object provides the status of this power policy. If the
value is enabled(1), it means this is the active power policy for the
associated domain. When set to a value of enabled(1), the power policy
will be made the active one for the associated domain. A set of disabled(0)
is not allowed.
The SET may fail when the user goes from a less restrictive policy
to a more restrictive policy, e.g. no power management to redundant power
modules.
This happens because the MM might have allocated more power for components
in the less restrictive policy. Then if a user wants to go to a more restrictive
policy, the power available may be lower than what was already allocated.
The SET should always succeed if a user goes from a more restrictive to
a less restrictive policy."
::= { powerPolicyEntry 7 }
-- ********************************************************************************
-- Error logs
-- ********************************************************************************
eventLog OBJECT IDENTIFIER ::= { errorLogs 4 }
-- ******************************************************************************
-- Event Log Table - Legacy Format
-- ******************************************************************************
readEventLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ReadEventLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of event log entry information."
::= { eventLog 2 }
readEventLogEntry OBJECT-TYPE
SYNTAX ReadEventLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Event log table entry"
INDEX { readEventLogIndex }
::= { readEventLogTable 1 }
ReadEventLogEntry ::= SEQUENCE {
readEventLogIndex INTEGER,
readEventLogString OCTET STRING
}
readEventLogIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The event log index number."
::= { readEventLogEntry 1 }
readEventLogString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing an event."
::= { readEventLogEntry 2 }
-- ******************************************************************************
-- Event Log Configuration
-- ******************************************************************************
clearEventLog OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear the event log.
NOTE: Value returned for the GET command is meaningless for this
MIB object."
::= { eventLog 3 }
monitorLogStateEvents OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If disabled, it means the info LED will not turn on when the log gets full
and no alerts will be sent out. If enabled, the LED will turn on when the log
gets full and alerts will be sent out."
::= { eventLog 4 }
-- ******************************************************************************
-- Event Log Table - Enhanced Format
-- ******************************************************************************
readEnhancedEventLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ReadEnhancedEventLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of enhanced event log entry information."
::= { eventLog 6 }
readEnhancedEventLogEntry OBJECT-TYPE
SYNTAX ReadEnhancedEventLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Enhaced Event log table entry, new entries could be added for new items."
INDEX { readEnhancedEventLogNumber }
::= { readEnhancedEventLogTable 1 }
ReadEnhancedEventLogEntry ::= SEQUENCE {
readEnhancedEventLogNumber Unsigned32,
readEnhancedEventLogAttribute OCTET STRING,
readEnhancedEventLogMessage OCTET STRING,
readEnhancedEventLogSequenceNum Unsigned32
}
readEnhancedEventLogNumber OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The event log number for the enhanced event log."
::= { readEnhancedEventLogEntry 1 }
readEnhancedEventLogAttribute OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing an event log's attribute, such as the
Event ID and Call Home Flag. The Event ID is a hexadecimal number representing an specific or class of events.
The call home flag indicates that the corresponding problem may result in a call home."
::= { readEnhancedEventLogEntry 2}
readEnhancedEventLogMessage OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing an event log message."
::= { readEnhancedEventLogEntry 3}
readEnhancedEventLogSequenceNum OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number for the enhanced event log. This number is the next
sequence number when this event record was create. This number continues
to grow, even if this event log is cleared, until it reaches the maximum
value of 4294967295. The next sequence number following the maximum value
is 1."
::= { readEnhancedEventLogEntry 4 }
-- ******************************************************************************
-- Event Log Table - Enhanced Format Audit Entries
-- ******************************************************************************
readAuditLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ReadAuditLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of audit log entry information. Audit log includes the logs whose source is 'Audit'"
::= { eventLog 10 }
readAuditLogEntry OBJECT-TYPE
SYNTAX ReadAuditLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Audit log table entry, new entries could be added for new items."
INDEX { readAuditLogNumber }
::= { readAuditLogTable 1 }
ReadAuditLogEntry ::= SEQUENCE {
readAuditLogNumber Unsigned32,
readAuditLogAttribute OCTET STRING,
readAuditLogMessage OCTET STRING,
readAuditLogSequenceNum Unsigned32
}
readAuditLogNumber OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The audit log number."
::= { readAuditLogEntry 1 }
readAuditLogAttribute OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing an audit eventlog's attribute."
::= { readAuditLogEntry 2 }
readAuditLogMessage OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing an audit event log message."
::= { readAuditLogEntry 3 }
readAuditLogSequenceNum OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number for the audit event log. This number is the next
sequence number when this event record was create. This number continues
to grow, even if this event log is cleared, until it reaches the maximum
value of 4294967295. The next sequence number following the maximum value
is 1."
::= { readAuditLogEntry 4 }
clearAuditLog OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear the audit log.
NOTE: Value returned for the GET command is meaningless for this
MIB object."
::= { eventLog 11 }
-- ******************************************************************************
-- Event Log Table - Enhanced Format Non-Audit Entries
-- ******************************************************************************
readSystemLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ReadSystemLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of system log entry information. System log includes the logs whose source is other than 'Audit'"
::= { eventLog 12 }
readSystemLogEntry OBJECT-TYPE
SYNTAX ReadSystemLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"System log table entry, new entries could be added for new items."
INDEX { readSystemLogNumber }
::= { readSystemLogTable 1 }
ReadSystemLogEntry ::= SEQUENCE {
readSystemLogNumber Unsigned32,
readSystemLogAttribute OCTET STRING,
readSystemLogMessage OCTET STRING,
readSystemLogSequenceNum Unsigned32
}
readSystemLogNumber OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system log index number."
::= { readSystemLogEntry 1 }
readSystemLogAttribute OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing an system event log's attribute."
::= { readSystemLogEntry 2 }
readSystemLogMessage OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing an system event log message."
::= { readSystemLogEntry 3 }
readSystemLogSequenceNum OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number for the system event log. This number is the next
sequence number when this event record was create. This number continues
to grow, even if this event log is cleared, until it reaches the maximum
value of 4294967295. The next sequence number following the maximum value
is 1."
::= { readSystemLogEntry 4 }
clearSystemLog OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear the system log.
NOTE: Value returned for the GET command is meaningless for this
MIB object."
::= { eventLog 13 }
-- ******************************************************************************
-- Event Log Table - Auxiliary Data Only
-- ******************************************************************************
readEventLogAuxTable OBJECT-TYPE
SYNTAX SEQUENCE OF ReadEventLogAuxEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of system log entry auxiliary information."
::= { eventLog 14 }
readEventLogAuxEntry OBJECT-TYPE
SYNTAX ReadEventLogAuxEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Event log auxiliary table entry, new entries could be added for new items."
INDEX { readEventLogAuxNumber }
::= { readEventLogAuxTable 1 }
ReadEventLogAuxEntry ::= SEQUENCE {
readEventLogAuxNumber INTEGER,
readEventLogAuxSequenceNum Unsigned32,
readEventLogAuxMessage OCTET STRING
}
readEventLogAuxNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system log auxiliary index number.
To relate this information to the system log, match Sequence number
of this entry to the Sequence number of the system log entry."
::= { readEventLogAuxEntry 1 }
readEventLogAuxSequenceNum OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number for the system event log that contains this Auxiliary
information. Value is from 1 through 4294967295 and then wraps."
::= { readEventLogAuxEntry 2 }
readEventLogAuxMessage OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing the auxiliary information from the log event."
::= { readEventLogAuxEntry 3 }
-- ********************************************************************************
-- Configure the MM
-- ********************************************************************************
-- ********************************************************************************
-- Remote Access Configuration
-- ********************************************************************************
remoteAccessConfig OBJECT IDENTIFIER ::= { configureSP 1 }
-- ********************************************************************************
-- General Remote Access and Remote Alerts Configuration
-- ********************************************************************************
generalRemoteCfg OBJECT IDENTIFIER ::= { remoteAccessConfig 1 }
remoteAlertRetryDelay OBJECT-TYPE
SYNTAX INTEGER {
oneHalfMinute(30),
oneMinute(60),
oneAndHalfMinutes(90),
twoMinutes(120),
twoAndHalfMinutes(150),
threeMinutes(180),
threeAndHalfMinutes(210),
fourMinutes(240)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number in seconds to delay between retries if sending a
remote alert is unsuccessful."
::= { generalRemoteCfg 3 }
remoteAlertRetryCount OBJECT-TYPE
SYNTAX INTEGER {
noretry(0),
retry1(1),
retry2(2),
retry3(3),
retry4(4),
retry5(5),
retry6(6),
retry7(7),
retry8(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of additional times a remote alert will be
retried if not successfully sent. A value of zero indicates
no retries will be attempted."
::= { generalRemoteCfg 4 }
userAuthenticationMethod OBJECT-TYPE
SYNTAX INTEGER {
localOnly(0),
ldapOnly(1),
localFirstThenLdap(2),
ldapFirstThenLocal(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Use this field to specify how users attempting to login should be authenticated.
There are two methods:
Local authentication. Userid and password are verified by searching the list
of users locally configured under Local Login Profiles.
LDAP based authentication. Users are authenticated via a remote LDAP server.
One or both authentication methods can be selected. If both methods should be
used, the order must be specified."
::= { generalRemoteCfg 7 }
maxSessionsPerLDAPUser OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum number of simultaneous active sessions allowed for
each LDAP user. If the value is 0, this option is disabled. The
minimum value is 1 and the maximum value is 20."
::= { generalRemoteCfg 9 }
authenticationLoggingTimeout OBJECT-TYPE
SYNTAX INTEGER {
logAll(0),
fiveSeconds(1),
thirtySeconds(2),
oneMinute(3),
fiveMinutes(4),
tenMinutes(5),
thirtyMinutes(6),
oneHour(7),
twelveHours(8),
oneDay(9),
logNone(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Use this option to set how long, in seconds, MM will not log the authentication
events for the same user. The default setting is 5 minutes. 0 indicates log all
authentication events, 255 indicates don't log any new authentication events."
::= { generalRemoteCfg 10 }
trackingIP OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This option indicates tracking different IP addresses for the same user is
enabled or not. If it is enabled then an access every second from
alternating IP addresses will result in multiple log entries,
regardless of the time duration set in the 'authenticaionLoggingTimeout'field.
If this flag is disabled, multiple accesses by varying IP addresses
will only be logged as 'new' accesses if they are out of the
'authenticationLoggingTimeout'."
::= { generalRemoteCfg 11 }
-- ********************************************************************************
-- Account security management
-- ********************************************************************************
accountSecurityManagement OBJECT IDENTIFIER ::= { generalRemoteCfg 20 }
accountSecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
legacy(0),
high(1),
custom(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The level of security needed for local user login passwords.
The legacy level:
- no password required
- no password expiration
- no password re-use restrictions
- no frequency of password change restrictions
- account is locked for 2 minutes after 5 login failures
- simple password rules
- no account inactivity monitoring
The high level:
- password required
- factory default 'USERID' account password must be changed on next login
- force user to change password on first login
- password expires in 90 days
- password re-use checking enabled (last 5 passwords kept in history)
- minimum 24 hours interval between password changes
- account is locked for 60 minutes after 5 login failures
- complex password rules with 2 degrees of difference from previous password
- alert on account inactivity after 120 days
- accounts disabled after 180 days of inactivity
The custom level:
- set the password settings individually under customSecuritySettings
The default value is legacy."
::= { accountSecurityManagement 1 }
customSecuritySettings OBJECT IDENTIFIER ::= { accountSecurityManagement 2 }
passwordExpirationPeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of days before login passwords expire. The minimum
value is 1 day and the maximum value is 365 days. The default
value is 90 days. A value of 0 disables this option."
::= { customSecuritySettings 2 }
defaultAdminPasswordExpired OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled, the factory default 'USERID' account password must
be changed on next login. The default value is disabled."
::= { customSecuritySettings 3 }
minimumPasswordReuseCycle OBJECT-TYPE
SYNTAX INTEGER {
none(0),
onePassword(1),
twoPasswords(2),
threePasswords(3),
fourPasswords(4),
fivePasswords(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of unique passwords a user must choose before
reusing a password. The default value is none."
::= { customSecuritySettings 4 }
complexPasswordRules OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled, the minimum complexity rules will be enforced for all
local login passwords and 'User login password required' rule will be enabled.
The complex rules are as follows:
must be 8-31 characters
must contain at least one number
must contain at least one letter
cannot contain white space characters
cannot be a repeat or reverse of user name
no more than 3 of the same characters used consecutively
must contain at least 2 of the following combinations:
at least one upper case letter
at least one lower case letter
at least one special character
Password and password confirm values must match
If disabled, the lagacy rules are:
must be 5-31 characters
must contain at least one number
must contain at least one letter
cannot contain white space characters
Password and password confirm values must match
The default value is disabled."
::= { customSecuritySettings 5 }
minimumDiffCharsPassword OBJECT-TYPE
SYNTAX INTEGER {
none(0),
oneChar(1),
twoChars(2),
threeChars(3),
fourChars(4),
fiveChars(5),
sixChars(6),
sevenChars(7),
eightChars(8),
nineChars(9),
tenChars(10),
elevenChars(11),
twelveChars(12),
thirteenChars(13),
fourteenChars(14),
fifteenChars(15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The required minimum number of characters in the new password
different from the previous password. The default value is 2.
A SET of this object is ignored until the complexPasswordRules option is enabled
and the minimumPasswordReuseCycle is not none(0)"
::= { customSecuritySettings 6 }
changePasswordFirstAccess OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled, the login user will be forced to change their password on
the first access after the account has been established or on
the first access after an administrator has changed the password
for the user, except for the administrator password for USERID.
The default value is disabled."
::= { customSecuritySettings 7 }
inactivityAlertPeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The period of time in days before generating an alert for a dormant
account. This value applies to all login accounts, including the
administrator account. The minimum value is 1 day and the maximum
value is 365 days. The default value is 0 which disables this option.
NOTE: This value must be less than the inactivityAlertDisablePeriod."
::= { customSecuritySettings 8 }
inactivityAlertDisablePeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The period of time in days before generating an alert and disabling
a dormant account. This value applies to all login accounts, excluding
the administrator account. The minimum value is 1 day and the maximum
value is 365 days. The default value is 0 which disables this option.
NOTE: This value must be greater than the inactivityAlertPeriod."
::= { customSecuritySettings 9 }
lockoutPeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The period of time in minutes that a user is locked out after the
maximum number of login failures was reached. The minimum value is
is 1 minute and the maximum value is 2880 minutes. The default value
is 2 minutes for the Legacy security level and 60 minutes for the
High security level. A value of 0 disables this option."
::= { customSecuritySettings 10 }
maxLoginFailures OBJECT-TYPE
SYNTAX INTEGER {
none(0),
oneTime(1),
twoTimes(2),
threeTimes(3),
fourTimes(4),
fiveTimes(5),
sixTimes(6),
sevenTimes(7),
eightTimes(8),
nineTimes(9),
tenTimes(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum number of login failures before a user account is locked.
A value of 0 disables this option. The default value is 5."
::= { customSecuritySettings 11 }
passwordChangeInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A minimum period of time that user is not able to change
their own password. The range of acceptable values will be
from 0 to 1440 (or 60 days). A value of 0 disables this
option. If the password expiration period is set, it must be
greater than the minimum password change interval."
::= { customSecuritySettings 12 }
-- ***********************************************************************
-- Serial Port Configuration
-- ***********************************************************************
serialPortCfg OBJECT IDENTIFIER ::= { remoteAccessConfig 2 }
portBaud OBJECT-TYPE
SYNTAX INTEGER {
baud2400(0),
baud4800(1),
baud9600(3),
baud19200(7),
baud38400(15),
baud57600(23),
baud115200(47)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Baud rate for the serial port."
::= { serialPortCfg 1 }
portParity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
odd(1),
even(3),
mark(5),
space(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Parity setting for the serial port."
::= { serialPortCfg 2 }
portStopBits OBJECT-TYPE
SYNTAX INTEGER {
oneStopbit(0),
twoOrOnePtFive(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of stop bits for the serial port."
::= { serialPortCfg 3 }
-- ********************************************************************************
-- Remote Alert Profiles
-- ********************************************************************************
remoteAlertIds OBJECT IDENTIFIER ::= { remoteAccessConfig 3 }
remoteAlertIdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteAlertIdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of remote alert entries.
This table lets you configure remote alert recipients.
You can define up to 12 unique recipients.
NOTE: All selected alert events will be sent to all
enabled alert recipients."
::= { remoteAlertIds 1 }
remoteAlertIdsEntry OBJECT-TYPE
SYNTAX RemoteAlertIdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Remote alert entries."
INDEX { remoteAlertIdEntryIndex }
::= { remoteAlertIdsTable 1 }
RemoteAlertIdsEntry ::= SEQUENCE {
remoteAlertIdEntryIndex INTEGER,
remoteAlertIdEntryStatus INTEGER,
remoteAlertIdEntryIpOrHostAddress OCTET STRING,
remoteAlertIdEntryTextDescription OCTET STRING,
remoteAlertIdEntryNotificationType INTEGER,
remoteAlertIdEmailAddr OCTET STRING,
remoteAlertIdEntrySelectiveAlert INTEGER
}
remoteAlertIdEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for remote alert entry."
::= { remoteAlertIdsEntry 1 }
remoteAlertIdEntryStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
disabledAndValid(1),
enabledAndValid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote alert entry status, invalid means entry
not defined yet, disabledAndValid means entry defined
but not enabled to send an alert, enabledAndValid means
entry defined and enabled to send an alert."
::= { remoteAlertIdsEntry 2 }
remoteAlertIdEntryIpOrHostAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A null terminated string that either
contains an IP address of the form '1.2.3.4'
or a host name (if DNS is enabled) for the
alert entry."
::= { remoteAlertIdsEntry 3 }
remoteAlertIdEntryTextDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A null terminated string that contains
a text description of this entry."
::= { remoteAlertIdsEntry 4 }
remoteAlertIdEntryNotificationType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
snmpOverLan(4),
emailOverLan(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote alert entry notification method. Types include
unknown when the type can't be determined (read-only),
snmpOverLan for an SNMP alert over ethernet,
and emailOverLan for a E-Mail alert over ethernet."
::= { remoteAlertIdsEntry 5 }
remoteAlertIdEmailAddr OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A null terminated string that contains an
E-Mail Address. For example, 'xyz@us.ibm.com'.
Used only for an E-mail over LAN notification type."
::= { remoteAlertIdsEntry 9 }
remoteAlertIdEntrySelectiveAlert OBJECT-TYPE
SYNTAX INTEGER {
critOnlyAlerts(0),
allAlerts(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote alert entry selective alert setting. A value of
critOnlyAlerts will only send critical alerts to this
remote alert recipient, a value of allAlerts will send
all alerts to this remote alert recipient."
::= { remoteAlertIdsEntry 13 }
generateTestAlert OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate a Test Alert. This will send a test alert to all configured
and enabled remote alert recipients.
NOTE: Value returned for the GET command is meaningless for this
MIB object."
::= { remoteAlertIds 30 }
-- ********************************************************************************
-- Remote Access Profiles
-- ********************************************************************************
remoteAccessIds OBJECT IDENTIFIER ::= { remoteAccessConfig 4 }
-- ********************************************************************************
-- User Login Table
-- ********************************************************************************
remoteAccessIdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteAccessIdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of remote access profiles.
This table lets you to configure all login profiles.
NOTE: By default, the management module
comes configured with one login profile that allows remote
access using a login ID of 'USERID' and a password of 'PASSW0RD'
(the 0 is a zero). To avoid a potential security exposure,
we strongly recommend that you change this default Login
Profile to values of your choice."
::= { remoteAccessIds 1 }
remoteAccessIdsEntry OBJECT-TYPE
SYNTAX RemoteAccessIdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Remote access entries."
INDEX { remoteAccessIdEntryIndex }
::= { remoteAccessIdsTable 1 }
RemoteAccessIdsEntry ::= SEQUENCE {
remoteAccessIdEntryIndex INTEGER,
remoteAccessIdEntryUserId OCTET STRING,
remoteAccessIdEntryPassword OCTET STRING,
remoteAccessIdEntryPermgroups OCTET STRING,
remoteAccessIdEntryLoggedIn INTEGER,
remoteAccessIdEntryLastLogin OCTET STRING,
remoteAccessIdEntryPwdCompliant INTEGER,
remoteAccessIdEntryPwdExp OCTET STRING,
remoteAccessIdEntryDormant INTEGER,
remoteAccessIdEntryState INTEGER,
remoteAccessIdEntryAction INTEGER,
remoteAccessIdEntrySessionCount INTEGER,
remoteAccessIdEntryMaxSessions INTEGER,
remoteAccessIdEntryStatus EntryStatus,
remoteAccessIdEntryIPMIProvisioned INTEGER,
remoteAccessIdEntrySNMPv3Provisioned INTEGER
}
remoteAccessIdEntryIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for Remote access entry."
::= { remoteAccessIdsEntry 1 }
remoteAccessIdEntryUserId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..33))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote access entry null terminated string that
contains the userid. It must not be a duplicate of
any previously configured ones. This field is only allowed to
be set when the entry status is under creation."
::= { remoteAccessIdsEntry 2 }
remoteAccessIdEntryPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote access password. The password rules are dictated
by a combination of the chassis security policy setting
(securityPolicySetting) and the user account security level setting
(accountSecurityLevel). Refer to object complexPasswordRules to
understand the requirements.
NOTE: Value returned by the GET command is meaningless
for this MIB object."
::= { remoteAccessIdsEntry 3 }
remoteAccessIdEntryPermgroups OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of permission groups for this userid, delmited with a '|'"
::= { remoteAccessIdsEntry 10 }
remoteAccessIdEntryLoggedIn OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if user is currently logged in or not."
::= { remoteAccessIdsEntry 11 }
remoteAccessIdEntryLastLogin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Timestamp for the last successful login by the user."
::= { remoteAccessIdsEntry 12 }
remoteAccessIdEntryPwdCompliant OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if user complies with all of the password
rules currently in effect."
::= { remoteAccessIdsEntry 13 }
remoteAccessIdEntryPwdExp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of days until the user's current password expires."
::= { remoteAccessIdsEntry 14 }
remoteAccessIdEntryDormant OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if the user account has been inactive for a
specified amount of time based on inactivityAlertDisablePeriod
in the customSecuritySettings section."
::= { remoteAccessIdsEntry 15 }
remoteAccessIdEntryState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
active(1),
locked(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the state of the user:
Active - normal state
Disabled - user cannot use account until enabled by a
supervisor or chassis user account manager. An account
can get disabled after being dormant for a specified
amount of time OR as a result of a supervisor or chassis
user account manager disabling it.
Locked - account is temporarily locked due to repeated
unsuccessful login attempts as specified by lockoutPeriod
in the customSecuritySettings section. Account can be
unlocked by a supervisor or chassis user account manager
OR can be automatically unlocked after the lockoutPeriod expires.
NOTE: The disable action does not apply to supervisor or chassis
user account manager accounts."
::= { remoteAccessIdsEntry 16 }
remoteAccessIdEntryAction OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
unlock(2),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Actions that only a supervisor or chassis user account manager
can perform for each user id:
Enable - enables an account in the Disabled state
Disable - disables an account in the Active or Locked state
Unlock - unlock an account in the Locked state
NOTE: The disable action does not apply to supervisor or chassis
user account manager accounts.
NOTE: Value returned for the GET command is meaningless for this
MIB object."
::= { remoteAccessIdsEntry 17 }
remoteAccessIdEntrySessionCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of sessions the user is currently logged in to."
::= { remoteAccessIdsEntry 18 }
remoteAccessIdEntryMaxSessions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum number of simultaneous active sessions allowed for
the user. If the value is 0, this option is disabled. The
minimum value is 1 and the maximum value is 20."
::= { remoteAccessIdsEntry 19 }
remoteAccessIdEntryStatus OBJECT-TYPE
SYNTAX EntryStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object manages the creation and deletion of this entry.
The steps recommended to add a new group are:
1. Create a new entry in this table
remoteAccessIdEntryStatus = createRequest
2. Set remoteAccessId as required.
The remoteAccessIdUserId and the remoteAccessIdPassword must be set
before the entry becomes valid. To set the remoteAccessIdsEntryPermgroups or
remoteAccessIdsEntryMaxSessions before the entry is valid, set these fields before
both the password and userId are set.
Only one row will be allowed to be underCreation at one time, and it must have the next index
in the table.
valid(1) - Indicates that the group represented
by this entry is available for use.
createRequest(2) - A new entry will be created in this table
for the specified group and the new entry
will transition to the underCreation(3).
underCreation(3) - Indicates that this entry exists in the
agent but is unavailable for use. After completing the
create operation, the agent will set this object to
underCreation(3).
invalid(4) - Deletes this entry."
::= { remoteAccessIdsEntry 20 }
remoteAccessIdEntryIPMIProvisioned OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if the user has been provisioned as an IPMI account.
If this is user is provisioned as an IPMI account, the nodes (scope) and authorities will
be determined by the scope and authorities of the permission groups to which this user belongs. These can be
seen in the remoteAccessRBSscopeTable and remoteAccessRBSroleTable for the permission groups to which this user
is assigned.
If the userid is longer than 16 characters or there are more than 12 user accounts enabled for IPMI provisioning,
setting the value to yes will return an error.
When provisioning an IPMI account by setting this object to yes(1), the SNMPv3 account is also automatically
provisioned."
::= { remoteAccessIdsEntry 21 }
remoteAccessIdEntrySNMPv3Provisioned OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if the user has been provisioned as an SNMPv3 account.
If this is user is provisioned as an SNMPv3 account, the nodes (scope) and authorities will
be determined by the scope and authorities of the permission groups to which this user belongs. These can be
seen in the remoteAccessRBSscopeTable and remoteAccessRBSroleTable for the permission groups to which this user
is assigned.
If the userid is longer than 16 characters or there are more than 12 user accounts enabled for SNMPv3 provisioning,
setting the value to yes will return an error.
When provisioning a SNMPv3 account by setting this object to yes(1), the IPMI account is also automatically
provisioned."
::= { remoteAccessIdsEntry 22 }
-- ********************************************************************************
-- User Login Role Table
-- ********************************************************************************
remoteAccessRBSroleTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteAccessRBSroleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of RBS User Role profiles."
::= { remoteAccessIds 3 }
remoteAccessRBSroleEntry OBJECT-TYPE
SYNTAX RemoteAccessRBSroleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"User Role entries."
INDEX { roleIndex }
::= { remoteAccessRBSroleTable 1 }
RemoteAccessRBSroleEntry ::= SEQUENCE {
roleIndex INTEGER,
roleId OCTET STRING,
rbsSupervisor INTEGER,
rbsOperator INTEGER,
rbsChassisOperator INTEGER,
rbsChassisAccountManagement INTEGER,
rbsChassisLogManagement INTEGER,
rbsChassisConfiguration INTEGER,
rbsChassisAdministration INTEGER,
rbsBladeOperator INTEGER,
rbsBladeRemotePresence INTEGER,
rbsBladeConfiguration INTEGER,
rbsBladeAdministration INTEGER,
rbsSwitchModuleOperator INTEGER,
rbsSwitchModuleConfiguration INTEGER,
rbsSwitchModuleAdministration INTEGER,
rbsEntryStatus EntryStatus
}
roleIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for RBS User Role entry."
::= { remoteAccessRBSroleEntry 1 }
roleId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote access RBS role entry null terminated string that
contains the permission group ID. It must not be a duplicate of
any previously configured ones. This field is only allowed to
be set when the entry status is under creation."
::= { remoteAccessRBSroleEntry 2 }
rbsSupervisor OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has no restrictions."
::= { remoteAccessRBSroleEntry 3 }
rbsOperator OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has read-only access, and cannot perform
any save, modify, clear, or state affecting operations
(e.g. restart MM, restore defaults, upgrade the firmware, etc.)."
::= { remoteAccessRBSroleEntry 4 }
rbsChassisOperator OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has ability to browse status and properties of
chassis components (MM, chassis fans, midplane, power modules).
Ability to backup MM configuration to a file.
Saving MM configuration to chassis requires supervisor access."
::= { remoteAccessRBSroleEntry 5 }
rbsChassisAccountManagement OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User can add/modify/delete user login profiles. Ability
to backup MM configuration to a file. Changing global login
settings require chassis configuration authority."
::= { remoteAccessRBSroleEntry 6 }
rbsChassisLogManagement OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has ability to clear the MM event log, change log
policy settings, and backup MM configuration to a file."
::= { remoteAccessRBSroleEntry 7 }
rbsChassisConfiguration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User can modify and save any chassis configuration
parameter (except user profiles and event log settings).
Ability to restore MM factory defaults if the user also has
chassis administration permissions. Ability to change the
global login settings, SOL configuration, and backup MM
configuration to a file."
::= { remoteAccessRBSroleEntry 8 }
rbsChassisAdministration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has ability to do MM firmware updates, modify chassis
LEDs, restore MM factory defaults if the user also has
chassis configuration permissions. Ability to restart MM
and backup MM configuration to a file."
::= { remoteAccessRBSroleEntry 9 }
rbsBladeOperator OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has ability to browse status and properties of
blades."
::= { remoteAccessRBSroleEntry 10 }
rbsBladeRemotePresence OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has ability to access the blades remote console.
The ability to issue the CLI
console command to start an SOL session to a blade will
also require this authority."
::= { remoteAccessRBSroleEntry 11 }
rbsBladeConfiguration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User can modify and save any blade configuration parameter."
::= { remoteAccessRBSroleEntry 12 }
rbsBladeAdministration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User can power on/off and restart blades, activate
standby blades, do firmware updates, and modify blade LEDs."
::= { remoteAccessRBSroleEntry 13 }
rbsSwitchModuleOperator OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has ability to browse status and properties of
I/O Modules, and to ping I/O Modules."
::= { remoteAccessRBSroleEntry 14 }
rbsSwitchModuleConfiguration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User can modify the I/O Module IP address, configure
I/O Module Advanced Management parameters, and restore
factory defaults on an I/O Module. Note that a user
requires both I/O Module configuration and I/O Module
administration roles in order to be able to launch a telnet
or web UI session to an I/O Module, or to restore factory
defaults on an I/O Module."
::= { remoteAccessRBSroleEntry 15 }
rbsSwitchModuleAdministration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User can power on/off and restart the I/O Modules,
update I/O Module firmware, enable/disable the Fast POST
and External Ports of an I/O Module. Note that a user
requires both I/O Module configuration and I/O Module
administration roles in order to be able to launch a telnet
session to an I/O Module, or to restore factory
defaults on an I/O Module."
::= { remoteAccessRBSroleEntry 16 }
rbsEntryStatus OBJECT-TYPE
SYNTAX EntryStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object manages the creation and deletion of this entry.
The steps recommended to add a new group are:
1. Create a new entry in this table
rbsEntryStatus = createRequest
2. Set roleId as required.
Only one row will be allowed to be underCreation at one time, and it must have the next index
in the table.
valid(1) - Indicates that the group represented
by this entry is available for use.
createRequest(2) - A new entry will be created in this table
for the specified group and the new entry
will transition to the underCreation(3).
underCreation(3) - Indicates that this entry exists in the
agent but is unavailable for use. After completing the
create operation, the agent will set this object to
underCreation(3).
invalid(4) - Deletes this entry."
::= { remoteAccessRBSroleEntry 23 }
-- ********************************************************************************
-- User Login Scope Table
-- ********************************************************************************
remoteAccessRBSscopeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteAccessRBSscopeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of RBS User Scope profiles."
::= { remoteAccessIds 4 }
remoteAccessRBSscopeEntry OBJECT-TYPE
SYNTAX RemoteAccessRBSscopeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"User Scope entries."
INDEX { scopeIndex }
::= { remoteAccessRBSscopeTable 1 }
RemoteAccessRBSscopeEntry ::= SEQUENCE {
scopeIndex INTEGER,
scopeId OCTET STRING,
rbsChassis INTEGER,
rbsBlade1 INTEGER,
rbsBlade2 INTEGER,
rbsBlade3 INTEGER,
rbsBlade4 INTEGER,
rbsBlade5 INTEGER,
rbsBlade6 INTEGER,
rbsBlade7 INTEGER,
rbsBlade8 INTEGER,
rbsBlade9 INTEGER,
rbsBlade10 INTEGER,
rbsBlade11 INTEGER,
rbsBlade12 INTEGER,
rbsBlade13 INTEGER,
rbsBlade14 INTEGER,
rbsSwitch1 INTEGER,
rbsSwitch2 INTEGER,
rbsSwitch3 INTEGER,
rbsSwitch4 INTEGER,
rbsSwitch5 INTEGER,
rbsSwitch6 INTEGER,
rbsSwitch7 INTEGER,
rbsSwitch8 INTEGER,
rbsSwitch9 INTEGER,
rbsSwitch10 INTEGER
}
scopeIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for RBS User Scope Entry."
::= { remoteAccessRBSscopeEntry 1 }
scopeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote access RBS scope entry null terminated string that
contains the permission group ID."
::= { remoteAccessRBSscopeEntry 2 }
rbsChassis OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the MM and chassis functions."
::= { remoteAccessRBSscopeEntry 3 }
rbsBlade1 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 1."
::= { remoteAccessRBSscopeEntry 4 }
rbsBlade2 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 2."
::= { remoteAccessRBSscopeEntry 5 }
rbsBlade3 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 3."
::= { remoteAccessRBSscopeEntry 6 }
rbsBlade4 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 4."
::= { remoteAccessRBSscopeEntry 7 }
rbsBlade5 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 5."
::= { remoteAccessRBSscopeEntry 8 }
rbsBlade6 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 6."
::= { remoteAccessRBSscopeEntry 9 }
rbsBlade7 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 7."
::= { remoteAccessRBSscopeEntry 10 }
rbsBlade8 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 8."
::= { remoteAccessRBSscopeEntry 11 }
rbsBlade9 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 9."
::= { remoteAccessRBSscopeEntry 12 }
rbsBlade10 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 10."
::= { remoteAccessRBSscopeEntry 13 }
rbsBlade11 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 11."
::= { remoteAccessRBSscopeEntry 14 }
rbsBlade12 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 12."
::= { remoteAccessRBSscopeEntry 15 }
rbsBlade13 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 13."
::= { remoteAccessRBSscopeEntry 16 }
rbsBlade14 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to the blade in slot 14."
::= { remoteAccessRBSscopeEntry 17 }
rbsSwitch1 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 1."
::= { remoteAccessRBSscopeEntry 18 }
rbsSwitch2 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 2."
::= { remoteAccessRBSscopeEntry 19 }
rbsSwitch3 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 3."
::= { remoteAccessRBSscopeEntry 20 }
rbsSwitch4 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 4."
::= { remoteAccessRBSscopeEntry 21 }
rbsSwitch5 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 5."
::= { remoteAccessRBSscopeEntry 22 }
rbsSwitch6 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 6."
::= { remoteAccessRBSscopeEntry 23 }
rbsSwitch7 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 7."
::= { remoteAccessRBSscopeEntry 24 }
rbsSwitch8 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 8."
::= { remoteAccessRBSscopeEntry 25 }
rbsSwitch9 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 9."
::= { remoteAccessRBSscopeEntry 26 }
rbsSwitch10 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User has access to I/O module 10."
::= { remoteAccessRBSscopeEntry 27 }
cmmCentralManagerIPMISNMPv3 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether CMM is the central manager of the IPMI and SNMPv3 accounts.
For a write, it can only be set to enabled.
Once the CMM state is enabled, it can only be cleared by doing a reset to defaults.
WARNING: Enabling CMM IPMI/SNMPv3 user account management will cause all presently
existing IPMI/SNMPv3 user accounts on nodes to be overwritten. Please be
sure to save any existing node IPMI/SNMPv3 account information before proceeding."
::= { remoteAccessIds 9 }
-- ********************************************************************************
-- Enable/Disable User Interfaces
-- ********************************************************************************
userInterfaces OBJECT IDENTIFIER ::= { remoteAccessConfig 5 }
cli OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
telnet-only(1),
ssh-only(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable CLI access to the MM (telnet and SSH).
The value enabled(3) means both telnet and ssh are enabled."
::= { userInterfaces 1 }
snmp OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
v1-only(1),
v3-only(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable SNMP v1 and v3 access to the MM.
The value enabled(3) means both telnet and ssh are enabled."
::= { userInterfaces 2 }
tcm OBJECT-TYPE
SYNTAX INTEGER (0..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable TCP command mode (TCM) access to the MM.
A value of 0 means disabled, any value from 1 to 20 means enabled.
NOTE: MM will provide a max of 20 connections for both
Secure TCP Command Mode and TCP Command Mode."
::= { userInterfaces 3 }
web OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable Web access (HTTP/HTTPS) to the MM.
NOTE: Disabling web access to the MM will cause all
currently active web sessions to disconnect,
and you will no longer be able to access the
MM management functions using a web browser."
::= { userInterfaces 4 }
stcm OBJECT-TYPE
SYNTAX INTEGER (0..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable secure TCP command mode (STCM) access to the MM.
A value of 0 means disabled, any value from 1 to 20 means enabled.
NOTE: MM will provide a max of 20 connections for both
Secure TCP Command Mode and TCP Command Mode.
If no valid server certificate is in place,
Secure TCP Command Mode will not be allowed to set to enable."
::= { userInterfaces 5 }
-- ********************************************************************************
-- User Login SSH Client Authentication Public Key Group
-- ********************************************************************************
mmSshClientAuth OBJECT IDENTIFIER ::= { remoteAccessConfig 6 }
mmSshClientAuthPubKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF MmSshClientAuthPubKeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains client authentication
public key information."
::= { mmSshClientAuth 1 }
mmSshClientAuthPubKeyEntry OBJECT-TYPE
SYNTAX MmSshClientAuthPubKeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A information list about a particular SSH
public key used for client authentication.
The primary table index is the same value as
the associated remoteAccessIdEntryIndex.
The secondary table index allows selection
of the Nth public key for that
remoteAccessIdEntryIndex."
INDEX { mmSshClientAuthRemoteAccessIdIndex ,
mmSshClientAuthPubKeyIndex }
::= { mmSshClientAuthPubKeyTable 1 }
MmSshClientAuthPubKeyEntry ::=
SEQUENCE {
mmSshClientAuthRemoteAccessIdIndex INTEGER,
mmSshClientAuthPubKeyIndex INTEGER,
mmSshClientAuthPubKeyType INTEGER,
mmSshClientAuthPubKeySize INTEGER,
mmSshClientAuthPubKeyFingerprint OCTET STRING,
mmSshClientAuthPubKeyAcceptFrom OCTET STRING,
mmSshClientAuthPubKeyComment OCTET STRING,
mmSshClientAuthPubKeyAction INTEGER,
mmSshClientAuthPubKeyEntryStatus EntryStatus,
mmSshClientAuthPubKeyUserId OCTET STRING
}
mmSshClientAuthRemoteAccessIdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The primary table index is the same value as
the associated remoteAccessIdEntryIndex used
as an index into the remoteAccessIdsTable."
::= { mmSshClientAuthPubKeyEntry 1 }
mmSshClientAuthPubKeyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The secondary table index used to select
one of the client authentication public
keys for a particular remote access Id.
The index is an integer value from 1 to N
where N is the number of keys associated
with a particular remote access Id.
An addition always causes the value of N to increase
by one, effectively adding an entry after the
existing keys for that remote access Id.
If an entry is deleted from the table by
setting mmSshClientAuthPubKeyEntryStatus = invalid,
the key associated with that entry is deleted.
If the deleted key was not the last key for
a remote access Id (mmSshClientAuthPubKeyIndex is
not the 'last' or Nth entry), the subsequent entries
are renumbered after the deletion. A deletion
always causes the value of N to decrease by one.
The underlying SSH server implementation searches
the keys in order from 1 to N when attempting public
key authentication.
NOTE:A maximum of 4 public keys can be installed
for one remote access Id. "
::= { mmSshClientAuthPubKeyEntry 2 }
mmSshClientAuthPubKeyType OBJECT-TYPE
SYNTAX INTEGER {
sshDss (1),
sshRsa (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the SSH public key represented by
this entry."
::= { mmSshClientAuthPubKeyEntry 3 }
mmSshClientAuthPubKeySize OBJECT-TYPE
SYNTAX INTEGER {
bits512 (1),
bits768 (2),
bits1024 (3),
bits2048 (4),
bits4096 (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the SSH public key represented by
this entry."
::= { mmSshClientAuthPubKeyEntry 4 }
mmSshClientAuthPubKeyFingerprint OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RSA fingerprint of the SSH public key represented
by this entry.
This value can be used with the SSH client to
verify, on the initial connection, that the Secure Shell
server responding to the request is the server running
on the managed entity. This is the fingerprint of the
operational host key pair. If the key pair represented
by this entry is not operational then sixteen null octets
must be returned."
::= { mmSshClientAuthPubKeyEntry 5 }
mmSshClientAuthPubKeyAcceptFrom OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is a filter that describes the set of SSH client
IP addresses and host names that can establish
SSH connections to the MM authenticated by the public key
represented by this entry of the table. The filter is a
comma-separated list of IP addresses and/or hostnames.
A question mark may be used to match any single character.
An asterisk may be used to match multiple characters.
An exclamation point may preceed an IP address or hostname
to deny acccess from that IP address or hostname.
The format of the Accept From specification is:
from=PATTERN-LIST
PATTERN-LIST is the filter, which must be enclosed in
double quotation marks.
NOTE:This MIB object can be manipulated after the
corresponding SSH public key is installed."
::= { mmSshClientAuthPubKeyEntry 6 }
mmSshClientAuthPubKeyComment OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is a descriptive string that the administrator may
use to help identify the public key represented by this entry.
It serves no function in the operation of the SSH server.
NOTE:This MIB object can be manipulated after the
corresponding SSH public key is installed."
::= { mmSshClientAuthPubKeyEntry 7 }
mmSshClientAuthPubKeyAction OBJECT-TYPE
SYNTAX INTEGER {
import(1),
export(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"import(1) starts the TFTP file transfer of an SSH
client authentication public key from the TFTP
server to the MM. The import operation is only
accepted if the associated RemoteAccessIdsEntry row
is configured and the current value of
mmSshClientAuthPubKeyEntryStatus is underCreation(3)
or valid(1), if the current value of mmSshClientAuthPubKeyEntryStatus
is valid(1), it will replace the key with a new key,
If the import is successful the value of
mmSshClientAuthPubKeyRowStatus changes to valid(1).
export(2) starts the TFTP file transfer of an SSH
client authentication public key from the MM to the TFTP
server. The export operation is only accepted if
the current value of mmSshClientAuthPubKeyEntryStatus
is valid(1).
NOTE: Users should compare the fingerprint value
mmSshClientAuthPubKeyFingerprint to the
fingerprint of client authentication key files
imported or exported using the TFTP file transfer
protocol to guard against possible file corruption.
Value returned for the GET command is meaningless
for this MIB object."
::= { mmSshClientAuthPubKeyEntry 8 }
mmSshClientAuthPubKeyEntryStatus OBJECT-TYPE
SYNTAX EntryStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object manages the creation and deletion of this entry.
The steps recommended to install and to activate a new client
authorization public key are:
1. Set values for mmSshClientAuthPubKeyTftpServer,
mmSshClientAuthPubKeyFileName, mmSshClientAuthPubKeyFileFormat
2. Create a new entry in this table
mmSshClientAuthPubKeyEntryStatus = createRequest
3. Import a new key mmSshClientAuthPubKeyAction = import
This entry will be valid after mmSshClientAuthPubKeyAction
is successfully imported.
4. Set mmSshClientAuthPubKeyAcceptFrom and
mmSshClientAuthPubKeyComment as required.
valid(1) - Indicates that the public key pair represented
by this entry is available for use by the Secure
Shell Server for client authentication.
createRequest(2) - A new entry will be created in this table
for the specified host key pair and the new
entry will transition to the underCreation(3)
state. The operation is only accepted if the
associated RemoteAccessIdsEntry row defining
a local user account is configured.
underCreation(3) - Indicates that this entry exists in the
agent but is unavailable for use. After completing the
create operation, the agent will set this object to
underCreation(3).
invalid(4) - Deletes this entry and any client authentication
public key that may be associated with it.
Note: only one row may be created at one time."
::= { mmSshClientAuthPubKeyEntry 9 }
mmSshClientAuthPubKeyUserId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..31))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The userid for the key entry."
::= { mmSshClientAuthPubKeyEntry 10 }
mmSshClientAuthPubKeyUnused OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of available storage locations that may be
used to install additional Client Authentication
Public Keys. This number decreases by one when a new
key is added to the configuration."
::= { mmSshClientAuth 2 }
mmSshClientAuthPubKeyTftpServer OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address or host name of the TFTP server where an SSH client
authentication public key is to be installed from or exported
to. The address must be entered in a dotted decimal
IP string (e.g. 9.37.44.2)."
::= { mmSshClientAuth 3 }
mmSshClientAuthPubKeyFileName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"File name on the TFTP server of an SSH client
authentication public key."
::= { mmSshClientAuth 4 }
mmSshClientAuthPubKeyFileFormat OBJECT-TYPE
SYNTAX INTEGER {
openSSH (1),
rfc4716 (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"File format of SSH client authentication public key files
imported from or exported to the TFTP file server."
::= { mmSshClientAuth 5 }
-- ********************************************************************************
-- Group Profiles for LDAP Users
-- ********************************************************************************
groupProfiles OBJECT IDENTIFIER ::= { remoteAccessConfig 7 }
-- ********************************************************************************
-- Group IDs Table
-- ********************************************************************************
groupIdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GroupIdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Group profiles.
This table lets you to configure all group profiles.
You can define up to 16 unique profiles."
::= { groupProfiles 1 }
groupIdsEntry OBJECT-TYPE
SYNTAX GroupIdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Group ID entries."
INDEX { groupIndex }
::= { groupIdsTable 1 }
GroupIdsEntry ::= SEQUENCE {
groupIndex INTEGER,
groupId OCTET STRING,
groupRole OCTET STRING,
groupEntryStatus EntryStatus
}
groupIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for Group IDs entry."
::= { groupIdsEntry 1 }
groupId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group ID. It is a null terminated string that contains the group-id.
It must not be a duplicate of any previously configured ones."
::= { groupIdsEntry 2 }
groupRole OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group Role. It indicates if the group has supervisor, operator,
or custom access."
::= { groupIdsEntry 3 }
groupEntryStatus OBJECT-TYPE
SYNTAX EntryStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object manages the creation and deletion of this entry.
The steps recommended to add a new group are:
1. Create a new entry in this table
groupEntryStatus = createRequest
2. Set groupId as required.
Then the entry will be valid.
valid(1) - Indicates that the group represented
by this entry is available for use.
createRequest(2) - A new entry will be created in this table
for the specified group and the new entry
will transition to the underCreation(3).
underCreation(3) - Indicates that this entry exists in the
agent but is unavailable for use. After completing the
create operation, the agent will set this object to
underCreation(3).
invalid(4) - Deletes this entry."
::= { groupIdsEntry 9 }
-- ********************************************************************************
-- Group Role Table
-- ********************************************************************************
groupRBSroleTable OBJECT-TYPE
SYNTAX SEQUENCE OF GroupRBSroleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Group Role profiles."
::= { groupProfiles 2 }
groupRBSroleEntry OBJECT-TYPE
SYNTAX GroupRBSroleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Group Role entries."
INDEX { groupRBSroleIndex }
::= { groupRBSroleTable 1 }
GroupRBSroleEntry ::= SEQUENCE {
groupRBSroleIndex INTEGER,
groupRBSroleId OCTET STRING,
groupRBSSupervisor INTEGER,
groupRBSOperator INTEGER,
groupRBSChassisOperator INTEGER,
groupRBSChassisAccountManagement INTEGER,
groupRBSChassisLogManagement INTEGER,
groupRBSChassisConfiguration INTEGER,
groupRBSChassisAdministration INTEGER,
groupRBSBladeOperator INTEGER,
groupRBSBladeRemotePresence INTEGER,
groupRBSBladeConfiguration INTEGER,
groupRBSBladeAdministration INTEGER,
groupRBSSwitchModuleOperator INTEGER,
groupRBSSwitchModuleConfiguration INTEGER,
groupRBSSwitchModuleAdministration INTEGER
}
groupRBSroleIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for Group Role entry."
::= { groupRBSroleEntry 1 }
groupRBSroleId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group ID"
::= { groupRBSroleEntry 2 }
groupRBSSupervisor OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has no restrictions."
::= { groupRBSroleEntry 3 }
groupRBSOperator OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has read-only access, and cannot perform
any save, modify, clear, or state affecting operations
(e.g. restart MM, restore defaults, upgrade the firmware, etc.)."
::= { groupRBSroleEntry 4 }
groupRBSChassisOperator OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has ability to browse status and properties of
chassis components (MM, chassis fans, midplane, power modules).
Ability to backup MM configuration to a file.
Saving MM configuration to chassis requires supervisor access."
::= { groupRBSroleEntry 5 }
groupRBSChassisAccountManagement OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group can add/modify/delete user login profiles. Ability
to backup MM configuration to a file. Changing global login
settings require chassis configuration authority."
::= { groupRBSroleEntry 6 }
groupRBSChassisLogManagement OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has ability to clear the MM event log, change log
policy settings, and backup MM configuration to a file."
::= { groupRBSroleEntry 7 }
groupRBSChassisConfiguration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group can modify and save any chassis configuration
parameter (except user profiles and event log settings).
Ability to restore MM factory defaults if the group also has
chassis administration permissions. Ability to change the
global login settings, SOL configuration, and backup MM
configuration to a file."
::= { groupRBSroleEntry 8 }
groupRBSChassisAdministration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has ability to do MM firmware updates, modify chassis
LEDs, restore MM factory defaults if the group also has
chassis configuration permissions. Ability to restart MM
and backup MM configuration to a file."
::= { groupRBSroleEntry 9 }
groupRBSBladeOperator OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has ability to browse status and properties of
blades."
::= { groupRBSroleEntry 10 }
groupRBSBladeRemotePresence OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has ability to access the blade remote console
The ability to issue the CLI
console command to start an SOL session to a blade will
also require this authority."
::= { groupRBSroleEntry 11 }
groupRBSBladeConfiguration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group can modify and save any blade configuration parameter."
::= { groupRBSroleEntry 12 }
groupRBSBladeAdministration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group can power on/off and restart blades, activate
standby blades, do firmware updates, and modify blade LEDs."
::= { groupRBSroleEntry 13 }
groupRBSSwitchModuleOperator OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has ability to browse status and properties of
I/O Modules, and to ping I/O Modules."
::= { groupRBSroleEntry 14 }
groupRBSSwitchModuleConfiguration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group can modify the I/O Module IP address, configure
I/O Module Advanced Management parameters, and restore
factory defaults on an I/O Module. Note that a group
requires both I/O Module configuration and I/O Module
administration roles in order to be able to launch a telnet
session to an I/O Module, or to restore factory
defaults on an I/O Module."
::= { groupRBSroleEntry 15 }
groupRBSSwitchModuleAdministration OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group can power on/off and restart the I/O Modules,
update I/O Module firmware, enable/disable the Fast POST
and External Ports of an I/O Module. Note that a group
requires both I/O Module configuration and I/O Module
administration roles in order to be able to launch a telnet
session to an I/O Module, or to restore factory
defaults on an I/O Module."
::= { groupRBSroleEntry 16 }
-- ********************************************************************************
-- Group Scope Table
-- ********************************************************************************
groupRBSscopeTable OBJECT-TYPE
SYNTAX SEQUENCE OF GroupRBSscopeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Group Scope profiles."
::= { groupProfiles 3 }
groupRBSscopeEntry OBJECT-TYPE
SYNTAX GroupRBSscopeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Group Scope entries."
INDEX { groupRBSscopeIndex }
::= { groupRBSscopeTable 1 }
GroupRBSscopeEntry ::= SEQUENCE {
groupRBSscopeIndex INTEGER,
groupRBSscopeId OCTET STRING,
groupRBSChassis INTEGER,
groupRBSBlade1 INTEGER,
groupRBSBlade2 INTEGER,
groupRBSBlade3 INTEGER,
groupRBSBlade4 INTEGER,
groupRBSBlade5 INTEGER,
groupRBSBlade6 INTEGER,
groupRBSBlade7 INTEGER,
groupRBSBlade8 INTEGER,
groupRBSBlade9 INTEGER,
groupRBSBlade10 INTEGER,
groupRBSBlade11 INTEGER,
groupRBSBlade12 INTEGER,
groupRBSBlade13 INTEGER,
groupRBSBlade14 INTEGER,
groupRBSSwitch1 INTEGER,
groupRBSSwitch2 INTEGER,
groupRBSSwitch3 INTEGER,
groupRBSSwitch4 INTEGER,
groupRBSSwitch5 INTEGER,
groupRBSSwitch6 INTEGER,
groupRBSSwitch7 INTEGER,
groupRBSSwitch8 INTEGER,
groupRBSSwitch9 INTEGER,
groupRBSSwitch10 INTEGER
}
groupRBSscopeIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for Group Scope Entry."
::= { groupRBSscopeEntry 1 }
groupRBSscopeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group ID"
::= { groupRBSscopeEntry 2 }
groupRBSChassis OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the MM and chassis functions."
::= { groupRBSscopeEntry 3 }
groupRBSBlade1 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 1."
::= { groupRBSscopeEntry 4 }
groupRBSBlade2 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 2."
::= { groupRBSscopeEntry 5 }
groupRBSBlade3 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 3."
::= { groupRBSscopeEntry 6 }
groupRBSBlade4 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 4."
::= { groupRBSscopeEntry 7 }
groupRBSBlade5 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 5."
::= { groupRBSscopeEntry 8 }
groupRBSBlade6 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 6."
::= { groupRBSscopeEntry 9 }
groupRBSBlade7 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 7."
::= { groupRBSscopeEntry 10 }
groupRBSBlade8 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 8."
::= { groupRBSscopeEntry 11 }
groupRBSBlade9 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 9."
::= { groupRBSscopeEntry 12 }
groupRBSBlade10 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 10."
::= { groupRBSscopeEntry 13 }
groupRBSBlade11 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 11."
::= { groupRBSscopeEntry 14 }
groupRBSBlade12 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 12."
::= { groupRBSscopeEntry 15 }
groupRBSBlade13 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 13."
::= { groupRBSscopeEntry 16 }
groupRBSBlade14 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to the blade in slot 14."
::= { groupRBSscopeEntry 17 }
groupRBSSwitch1 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 1."
::= { groupRBSscopeEntry 18 }
groupRBSSwitch2 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 2."
::= { groupRBSscopeEntry 19 }
groupRBSSwitch3 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 3."
::= { groupRBSscopeEntry 20 }
groupRBSSwitch4 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 4."
::= { groupRBSscopeEntry 21 }
groupRBSSwitch5 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 5."
::= { groupRBSscopeEntry 22 }
groupRBSSwitch6 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 6."
::= { groupRBSscopeEntry 23 }
groupRBSSwitch7 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 7."
::= { groupRBSscopeEntry 24 }
groupRBSSwitch8 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 8."
::= { groupRBSscopeEntry 25 }
groupRBSSwitch9 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 9."
::= { groupRBSscopeEntry 26 }
groupRBSSwitch10 OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Group has access to I/O module 10."
::= { groupRBSscopeEntry 27 }
-- ********************************************************************************
-- Remote Alert types
-- ********************************************************************************
remoteAlerts OBJECT IDENTIFIER ::= { configureSP 2 }
-- ********************************************************************************
-- Remote Alert Critical Error types
-- ********************************************************************************
remoteAlertsCrit OBJECT IDENTIFIER ::= { remoteAlerts 1 }
critPower OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert if any of the system power supplies fail."
::= { remoteAlertsCrit 5 }
critBlade OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any critical error condition on a blade."
::= { remoteAlertsCrit 10 }
critIO OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any critical error condition on I/O module."
::= { remoteAlertsCrit 11 }
critStorage OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any critical error condition on a Storage module."
::= { remoteAlertsCrit 12 }
critChassis OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any critical error condition on chassis."
::= { remoteAlertsCrit 13 }
critFan OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any critical error condition on cooling devices."
::= { remoteAlertsCrit 14 }
-- ********************************************************************************
-- Remote Alert Warning(non-critical) Error types
-- ********************************************************************************
remoteAlertsNonCrit OBJECT IDENTIFIER ::= { remoteAlerts 2 }
warnLogFull OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert if the system log reaches 100% full."
::= { remoteAlertsNonCrit 10 }
warnBlade OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any warning condition on a blade."
::= { remoteAlertsNonCrit 15 }
warnIO OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any warning condition on I/O module."
::= { remoteAlertsNonCrit 16 }
warnStorage OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any warning condition on a Storage module."
::= { remoteAlertsNonCrit 17 }
warnPower OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any warning condition on power module."
::= { remoteAlertsNonCrit 18 }
warnChassis OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any warning condition on chassis."
::= { remoteAlertsNonCrit 19 }
warnFan OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any warning condition on cooling devices."
::= { remoteAlertsNonCrit 20 }
-- ********************************************************************************
-- Remote Alert System Error types
-- ********************************************************************************
remoteAlertsSystem OBJECT IDENTIFIER ::= { remoteAlerts 3 }
systemInventory OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert if the a processor blade or media tray is
added or removed."
::= { remoteAlertsSystem 10 }
systemLog75PctFull OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert if the system log reaches 75% full."
::= { remoteAlertsSystem 11 }
networkChangeNotification OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert if the MM has restarted and the internal
network has initialized successfully, or if an IP address
change via a source other than the management module."
::= { remoteAlertsSystem 12 }
systemRemoteLogin OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert if the system detects a new user logged in from
a remote site."
::= { remoteAlertsSystem 15 }
systemBlade OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any informational condition on a blade."
::= { remoteAlertsSystem 16 }
systemIO OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any informational condition on I/O module."
::= { remoteAlertsSystem 17 }
systemStorage OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any informational condition on a Storage module."
::= { remoteAlertsSystem 18 }
systemPower OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any informational condition on power module."
::= { remoteAlertsSystem 19 }
systemChassis OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any informational condition on chassis."
::= { remoteAlertsSystem 20}
systemFan OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any informational condition on cooling device."
::= { remoteAlertsSystem 21}
systemPWRDO OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate an alert for any informational condition on power on and power off."
::= { remoteAlertsSystem 22}
-- ********************************************************************************
-- Users
-- ********************************************************************************
--
users OBJECT IDENTIFIER ::= { monitors 17 }
-- ********************************************************************************
-- MM Users
-- ********************************************************************************
--
mmUsers OBJECT IDENTIFIER ::= { users 1 }
currentlyLoggedInTable OBJECT-TYPE
SYNTAX SEQUENCE OF CurrentlyLoggedInEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of MM users currently logged in."
::= { mmUsers 1 }
currentlyLoggedInEntry OBJECT-TYPE
SYNTAX CurrentlyLoggedInEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"MM users currently logged in entries."
INDEX { currentlyLoggedInEntryIndex }
::= { currentlyLoggedInTable 1 }
CurrentlyLoggedInEntry ::= SEQUENCE {
currentlyLoggedInEntryIndex INTEGER,
currentlyLoggedInEntryUserId OCTET STRING,
currentlyLoggedInEntryAccMethod OCTET STRING
}
currentlyLoggedInEntryIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for MM users currently logged in."
::= { currentlyLoggedInEntry 1 }
currentlyLoggedInEntryUserId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name for MM users currently logged in.
NOTE: 'Default SNMPv1 user' indicates an internal user used by SNMPv1 agent."
::= { currentlyLoggedInEntry 2 }
currentlyLoggedInEntryAccMethod OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Access method for MM users currently logged in."
::= { currentlyLoggedInEntry 3 }
-- ********************************************************************************
-- Vital Product Data(VPD) information
--
-- ATTENTION !!!!!!
--
-- All data under the vpdInformation anchor is deprecated and should not be used,
-- with the exception of these tables:
--
-- bladeMACAddressVpdTable { bladeHardwareVpd 2 }
--
-- inventoryManagementActivityVpdTable { vpdInformation 22 }
--
-- bladeAndExpCardWwnGuidVpdTable { bladeHardwareVpd 7 }
--
-- All applications and scripts should be changed to migrate toward using the
-- new component based tables for hardware and firmware inventory under this anchor:
--
-- componentInformation OBJECT IDENTIFIER ::= { monitors 23 }
--
-- The objects under the vpdInformation section will be maintained on an "as-is"
-- basis and will not be enhanced. They are included as a convenience for
-- users migrating from a legacy BladeCenter chassis environment.
--
-- Not all components in the Flex chassis are guaranteed to be present in these
-- old deprecated objects.
--
-- ********************************************************************************
vpdInformation OBJECT IDENTIFIER ::= { monitors 21 }
-- ********************************************************************************
-- Chassis VPD
-- ********************************************************************************
chassisInfoVpd OBJECT IDENTIFIER ::= { vpdInformation 1 }
chassisVpd OBJECT IDENTIFIER ::= { chassisInfoVpd 1 }
chassisVpdMachineType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Machine type VPD information (from System BIOS). This field must be four
alpha numeric characters."
::= { chassisVpd 1 }
chassisVpdMachineModel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Machine model VPD information (from System BIOS). This field must be three
alpha numeric characters."
::= { chassisVpd 2 }
chassisSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Machine serial number VPD information (from System BIOS). This field must be
seven alpha numeric characters."
::= { chassisVpd 3 }
chassisUUID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Machine UUID (Universal Unique ID information) (from System BIOS). This field
must be 32 alpha numeric characters."
::= { chassisVpd 4 }
chassisManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis manufacturing ID."
::= { chassisVpd 5 }
chassisHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis hardware revision.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { chassisVpd 6 }
chassisFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis FRU number."
::= { chassisVpd 7 }
chassisManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis manufacture date."
::= { chassisVpd 8 }
chassisPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis part number."
::= { chassisVpd 9 }
chassisFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis FRU serial number."
::= { chassisVpd 10 }
chassisManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis manufacturer ID Number."
::= { chassisVpd 11 }
chassisProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis product ID."
::= { chassisVpd 12 }
chassisSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis subsystem manufacturer."
::= { chassisVpd 13 }
chassisClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis Common Language Equipment Identification (CLEI)."
::= { chassisVpd 14 }
chassisHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Machine chassis hardware revision in string format.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { chassisVpd 16 }
-- ********************************************************************************
-- Management Module Hardware VPD
-- ********************************************************************************
mmHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 2 }
mmHardwareVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF MmHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of the management module hardware components.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpd 1 }
mmHardwareVpdEntry OBJECT-TYPE
SYNTAX MmHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Management module hardware VPD entry.
For consistent results, view as a table and not as individual entries."
INDEX { mmHardwareVpdIndex }
::= { mmHardwareVpdTable 1 }
MmHardwareVpdEntry ::= SEQUENCE {
mmHardwareVpdIndex INTEGER,
mmHardwareVpdBayNumber OCTET STRING,
mmHardwareVpdManufacturingId OCTET STRING,
mmHardwareVpdFruNumber OCTET STRING,
mmHardwareVpdHardwareRevision INTEGER,
mmHardwareVpdUuid OCTET STRING,
mmHardwareVpdManufDate OCTET STRING,
mmHardwareVpdPartNumber OCTET STRING,
mmHardwareVpdFruSerial OCTET STRING,
mmHardwareVpdManufacturingIDNumber OCTET STRING,
mmHardwareVpdProductId OCTET STRING,
mmHardwareVpdSubManufacturerId OCTET STRING,
mmHardwareVpdClei OCTET STRING,
mmHardwareVpdHardwareRevisionString OCTET STRING
}
mmHardwareVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD index.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 1 }
mmHardwareVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD Bay number.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 2 }
mmHardwareVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 3 }
mmHardwareVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD FRU number.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 4 }
mmHardwareVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD hardware revision.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { mmHardwareVpdEntry 5 }
mmHardwareVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD UUID.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 6 }
mmHardwareVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD manufacture date.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 7 }
mmHardwareVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD Part number.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 8 }
mmHardwareVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD FRU serial number.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 9 }
mmHardwareVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD manufacturer ID Number.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 10 }
mmHardwareVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD product ID.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 11 }
mmHardwareVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD subsystem manufacturer.
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 12 }
mmHardwareVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD Common
Language Equipment Identification (CLEI).
For consistent results, view as a table and not as individual entries."
::= { mmHardwareVpdEntry 13 }
mmHardwareVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Management module hardware VPD hardware revision in string format.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { mmHardwareVpdEntry 14 }
-- ********************************************************************************
-- System Firmware Level VPD
-- ********************************************************************************
mmFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 3 }
-- ********************************************************************************
-- MM Firmware VPD
-- ********************************************************************************
mmMainApplVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF MmMainApplVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of MM Firmware VPD."
::= { mmFirmwareVpd 1 }
mmMainApplVpdEntry OBJECT-TYPE
SYNTAX MmMainApplVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"MM Firmware VPD entry."
INDEX { mmMainApplVpdIndex }
::= { mmMainApplVpdTable 1 }
MmMainApplVpdEntry ::= SEQUENCE {
mmMainApplVpdIndex INTEGER,
mmMainApplVpdName OCTET STRING,
mmMainApplVpdBuildId OCTET STRING,
mmMainApplVpdRevisonNumber OCTET STRING,
mmMainApplVpdFilename OCTET STRING,
mmMainApplVpdBuildDate OCTET STRING
}
mmMainApplVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Firmware VPD index."
::= { mmMainApplVpdEntry 1 }
mmMainApplVpdName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Firmware VPD name description.
'MM firmware' indicates the running firmware of the MM.
'MM firmware (pending restart)' indicates the flashed
firmware of the MM which will become active after the
next restart."
::= { mmMainApplVpdEntry 2 }
mmMainApplVpdBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Firmware VPD build identification."
::= { mmMainApplVpdEntry 3 }
mmMainApplVpdRevisonNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Firmware VPD revision number."
::= { mmMainApplVpdEntry 4 }
mmMainApplVpdFilename OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Firmware VPD file name."
::= { mmMainApplVpdEntry 5 }
mmMainApplVpdBuildDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Firmware VPD build date."
::= { mmMainApplVpdEntry 6 }
-- ********************************************************************************
-- System Component Level VPD Activity log
-- ********************************************************************************
inventoryManagementActivityVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF InventoryManagementActivityVpdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of system component hardware VPD activity log.
For consistent results, view as a table and not as individual entries."
::= { vpdInformation 22 }
inventoryManagementActivityVpdEntry OBJECT-TYPE
SYNTAX InventoryManagementActivityVpdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"System component hardware VPD activity log entry.
For consistent results, view as a table and not as individual entries."
INDEX { componentLevelActivityVpdIndex }
::= { inventoryManagementActivityVpdTable 1 }
InventoryManagementActivityVpdEntry ::= SEQUENCE {
componentLevelActivityVpdIndex INTEGER,
componentLevelActivityVpdFruNumber OCTET STRING,
componentLevelActivityVpdSerialNumber OCTET STRING,
componentLevelActivityVpdManufacturingId OCTET STRING,
componentLevelActivityVpdBayNumber OCTET STRING,
componentLevelActivityVpdAction OCTET STRING,
componentLevelActivityVpdTimestamp OCTET STRING,
componentLevelActivityVpdModuleName OCTET STRING,
componentLevelActivityVpdTopologyPath OCTET STRING
}
componentLevelActivityVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System component level VPD activity log index.
For consistent results, view as a table and not as individual entries."
::= { inventoryManagementActivityVpdEntry 1 }
componentLevelActivityVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System component level VPD activity log FRU number.
For consistent results, view as a table and not as individual entries."
::= { inventoryManagementActivityVpdEntry 2 }
componentLevelActivityVpdSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System component level VPD activity log serial number.
For consistent results, view as a table and not as individual entries."
::= { inventoryManagementActivityVpdEntry 3 }
componentLevelActivityVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System component level VPD activity log manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { inventoryManagementActivityVpdEntry 4 }
componentLevelActivityVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"System component level VPD activity log Bay number.
For consistent results, view as a table and not as individual entries."
::= { inventoryManagementActivityVpdEntry 5 }
componentLevelActivityVpdAction OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System component level VPD activity log action (added/removed).
For consistent results, view as a table and not as individual entries."
::= {inventoryManagementActivityVpdEntry 9 }
componentLevelActivityVpdTimestamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System component level VPD activity log timestamp.
For consistent results, view as a table and not as individual entries."
::= { inventoryManagementActivityVpdEntry 10 }
componentLevelActivityVpdModuleName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module name which this row is associated with.
For consistent results, view as a table and not as individual entries."
::= { inventoryManagementActivityVpdEntry 12 }
componentLevelActivityVpdTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The chassis and each installed component is represented by a hardware
topology tree, where each node in the tree represents a component.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
The topology path's numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX, 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { inventoryManagementActivityVpdEntry 15 }
-- ********************************************************************************
-- Blade Hardware VPD
-- ********************************************************************************
bladeHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 4 }
bladeHardwareVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of VPD information for the blade hardware components.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpd 1 }
bladeHardwareVpdEntry OBJECT-TYPE
SYNTAX BladeHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Blade hardware VPD entry.
For consistent results, view as a table and not as individual entries."
INDEX { bladeHardwareVpdIndex }
::= { bladeHardwareVpdTable 1 }
BladeHardwareVpdEntry ::= SEQUENCE {
bladeHardwareVpdIndex INTEGER,
bladeHardwareVpdBayNumber OCTET STRING,
bladeHardwareVpdManufacturingId OCTET STRING,
bladeHardwareVpdFruNumber OCTET STRING,
bladeHardwareVpdHardwareRevision INTEGER,
bladeHardwareVpdSerialNumber OCTET STRING,
bladeHardwareVpdMachineType OCTET STRING,
bladeHardwareVpdUuid OCTET STRING,
bladeHardwareVpdManufDate OCTET STRING,
bladeHardwareVpdPartNumber OCTET STRING,
bladeHardwareVpdFruSerial OCTET STRING,
bladeHardwareVpdMachineModel OCTET STRING,
bladeHardwareVpdManufacturingIDNumber OCTET STRING,
bladeHardwareVpdProductId OCTET STRING,
bladeHardwareVpdSubManufacturerId OCTET STRING,
bladeHardwareVpdClei OCTET STRING,
bladeHardwareVpdHardwareRevisionString OCTET STRING,
bladeDaughterVpdCardType INTEGER,
bladeDaughterVpdManufacturingId OCTET STRING,
bladeDaughterVpdFruNumber OCTET STRING,
bladeDaughterVpdHardwareRevision INTEGER,
bladeDaughterVpdSerialNumber OCTET STRING,
bladeDaughterVpdMachineType OCTET STRING,
bladeDaughterVpdUuid OCTET STRING,
bladeDaughterVpdManufDate OCTET STRING,
bladeDaughterVpdPartNumber OCTET STRING,
bladeDaughterVpdFruSerial OCTET STRING,
bladeDaughterVpdManufacturingIDNumber OCTET STRING,
bladeDaughterVpdProductId OCTET STRING,
bladeDaughterVpdSubManufacturerId OCTET STRING,
bladeDaughterVpdClei OCTET STRING,
bladeDaughterVpdHardwareRevisionString OCTET STRING
}
bladeHardwareVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD index.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 1 }
bladeHardwareVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD Bay number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 2 }
bladeHardwareVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 3 }
bladeHardwareVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD FRU number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 4 }
bladeHardwareVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD hardware revision.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { bladeHardwareVpdEntry 5 }
bladeHardwareVpdSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD serial number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 6 }
bladeHardwareVpdMachineType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD machine type.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 7 }
bladeHardwareVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD UUID.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 8 }
bladeHardwareVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD Manufacture Date.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 9 }
bladeHardwareVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD Part number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 10 }
bladeHardwareVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD FRU serial number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 11 }
bladeHardwareVpdMachineModel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD machine model.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 12 }
bladeHardwareVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD Manufacturer ID Number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 13 }
bladeHardwareVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD product ID.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 14 }
bladeHardwareVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD subsystem manufacturer ID.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 15 }
bladeHardwareVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD Common Language Equipment Identifier (CLEI).
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 16 }
bladeHardwareVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade hardware VPD hardware revision in string format.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { bladeHardwareVpdEntry 17 }
bladeDaughterVpdCardType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
networkExpansion(1),
storageExpansion(2),
pciExpansion(3),
genericExpansion(4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD type.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 20 }
bladeDaughterVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 21 }
bladeDaughterVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD FRU number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 22 }
bladeDaughterVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD hardware revision.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { bladeHardwareVpdEntry 23 }
bladeDaughterVpdSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD Serial number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 24 }
bladeDaughterVpdMachineType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD Machine type.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 25 }
bladeDaughterVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD UUID.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 26 }
bladeDaughterVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD Manufacture date.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 27 }
bladeDaughterVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD Part number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 28 }
bladeDaughterVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD FRU Serial.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 29 }
bladeDaughterVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD manufacturer ID Number.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 30 }
bladeDaughterVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD product ID.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 31 }
bladeDaughterVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD subsystem manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 32 }
bladeDaughterVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD
Common Language Equipment Identifier (CLEI).
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpdEntry 33 }
bladeDaughterVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD hardware revision in string format.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { bladeHardwareVpdEntry 34 }
-- ********************************************************************************
-- Blade MAC Address VPD
-- ********************************************************************************
bladeMACAddressVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeMACAddressVpdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of MAC addresses of the blade and its expansion cards (daughter cards).
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpd 2 }
bladeMACAddressVpdEntry OBJECT-TYPE
SYNTAX BladeMACAddressVpdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade MAC address entry.
For consistent results, view as a table and not as individual entries."
INDEX { bladeMACAddressVpdIndex }
::= { bladeMACAddressVpdTable 1 }
BladeMACAddressVpdEntry ::= SEQUENCE {
bladeMACAddressVpdIndex INTEGER,
bladeMACAddress1Vpd OCTET STRING,
bladeMACAddress2Vpd OCTET STRING,
bladeMACAddress3Vpd OCTET STRING,
bladeMACAddress4Vpd OCTET STRING,
bladeMACAddress5Vpd OCTET STRING,
bladeMACAddress6Vpd OCTET STRING,
bladeMACAddress7Vpd OCTET STRING,
bladeMACAddress8Vpd OCTET STRING,
bladeDaughterCard1MACAddress1Vpd OCTET STRING,
bladeDaughterCard1MACAddress2Vpd OCTET STRING,
bladeDaughterCard1MACAddress3Vpd OCTET STRING,
bladeDaughterCard1MACAddress4Vpd OCTET STRING,
bladeDaughterCard1MACAddress5Vpd OCTET STRING,
bladeDaughterCard1MACAddress6Vpd OCTET STRING,
bladeDaughterCard1MACAddress7Vpd OCTET STRING,
bladeDaughterCard1MACAddress8Vpd OCTET STRING,
bladeDaughterCard2MACAddress1Vpd OCTET STRING,
bladeDaughterCard2MACAddress2Vpd OCTET STRING,
bladeDaughterCard2MACAddress3Vpd OCTET STRING,
bladeDaughterCard2MACAddress4Vpd OCTET STRING,
bladeDaughterCard2MACAddress5Vpd OCTET STRING,
bladeDaughterCard2MACAddress6Vpd OCTET STRING,
bladeDaughterCard2MACAddress7Vpd OCTET STRING,
bladeDaughterCard2MACAddress8Vpd OCTET STRING,
bladeDaughterCard3MACAddress1Vpd OCTET STRING,
bladeDaughterCard3MACAddress2Vpd OCTET STRING,
bladeDaughterCard3MACAddress3Vpd OCTET STRING,
bladeDaughterCard3MACAddress4Vpd OCTET STRING,
bladeDaughterCard3MACAddress5Vpd OCTET STRING,
bladeDaughterCard3MACAddress6Vpd OCTET STRING,
bladeDaughterCard3MACAddress7Vpd OCTET STRING,
bladeDaughterCard3MACAddress8Vpd OCTET STRING,
bladeDaughterCard4MACAddress1Vpd OCTET STRING,
bladeDaughterCard4MACAddress2Vpd OCTET STRING,
bladeDaughterCard4MACAddress3Vpd OCTET STRING,
bladeDaughterCard4MACAddress4Vpd OCTET STRING,
bladeDaughterCard4MACAddress5Vpd OCTET STRING,
bladeDaughterCard4MACAddress6Vpd OCTET STRING,
bladeDaughterCard4MACAddress7Vpd OCTET STRING,
bladeDaughterCard4MACAddress8Vpd OCTET STRING,
bladeDaughterCard5MACAddress1Vpd OCTET STRING,
bladeDaughterCard5MACAddress2Vpd OCTET STRING,
bladeDaughterCard5MACAddress3Vpd OCTET STRING,
bladeDaughterCard5MACAddress4Vpd OCTET STRING,
bladeDaughterCard5MACAddress5Vpd OCTET STRING,
bladeDaughterCard5MACAddress6Vpd OCTET STRING,
bladeDaughterCard5MACAddress7Vpd OCTET STRING,
bladeDaughterCard5MACAddress8Vpd OCTET STRING,
bladeHSDaughterCard1MACAddress1Vpd OCTET STRING,
bladeHSDaughterCard1MACAddress2Vpd OCTET STRING,
bladeHSDaughterCard1MACAddress3Vpd OCTET STRING,
bladeHSDaughterCard1MACAddress4Vpd OCTET STRING,
bladeHSDaughterCard1MACAddress5Vpd OCTET STRING,
bladeHSDaughterCard1MACAddress6Vpd OCTET STRING,
bladeHSDaughterCard1MACAddress7Vpd OCTET STRING,
bladeHSDaughterCard1MACAddress8Vpd OCTET STRING,
bladeSideCardMACAddress1Vpd OCTET STRING,
bladeSideCardMACAddress2Vpd OCTET STRING,
bladeSideCardMACAddress3Vpd OCTET STRING,
bladeSideCardMACAddress4Vpd OCTET STRING,
bladeSideCardMACAddress5Vpd OCTET STRING,
bladeSideCardMACAddress6Vpd OCTET STRING,
bladeSideCardMACAddress7Vpd OCTET STRING,
bladeSideCardMACAddress8Vpd OCTET STRING
}
bladeMACAddressVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade index.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 1 }
bladeMACAddress1Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade MAC address 1.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 2 }
bladeMACAddress2Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade MAC address 2.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 3 }
bladeMACAddress3Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade MAC address 3.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 4 }
bladeMACAddress4Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade MAC address 4.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 5 }
bladeMACAddress5Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade MAC address 5.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 6 }
bladeMACAddress6Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade MAC address 6.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 7 }
bladeMACAddress7Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade MAC address 7.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 8 }
bladeMACAddress8Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade MAC address 8.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 9 }
bladeDaughterCard1MACAddress1Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 1 MAC address 1.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 10 }
bladeDaughterCard1MACAddress2Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 1 MAC address 2.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 11 }
bladeDaughterCard1MACAddress3Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 1 MAC address 3.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 12 }
bladeDaughterCard1MACAddress4Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 1 MAC address 4.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 13 }
bladeDaughterCard1MACAddress5Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 1 MAC address 5.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 14 }
bladeDaughterCard1MACAddress6Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 1 MAC address 6.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 15 }
bladeDaughterCard1MACAddress7Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 1 MAC address 7.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 16 }
bladeDaughterCard1MACAddress8Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 1 MAC address 8.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 17 }
bladeDaughterCard2MACAddress1Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 2 MAC address 1.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 18 }
bladeDaughterCard2MACAddress2Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 2 MAC address 2.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 19 }
bladeDaughterCard2MACAddress3Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 2 MAC address 3.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 20 }
bladeDaughterCard2MACAddress4Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 2 MAC address 4.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 21 }
bladeDaughterCard2MACAddress5Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 2 MAC address 5.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 22 }
bladeDaughterCard2MACAddress6Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 2 MAC address 6.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 23 }
bladeDaughterCard2MACAddress7Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 2 MAC address 7.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 24 }
bladeDaughterCard2MACAddress8Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 2 MAC address 8.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 25 }
bladeDaughterCard3MACAddress1Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 3 MAC address 1.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 26 }
bladeDaughterCard3MACAddress2Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 3 MAC address 2.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 27 }
bladeDaughterCard3MACAddress3Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 3 MAC address 3.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 28 }
bladeDaughterCard3MACAddress4Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 3 MAC address 4.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 29 }
bladeDaughterCard3MACAddress5Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 3 MAC address 5.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 30 }
bladeDaughterCard3MACAddress6Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 3 MAC address 6.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 31 }
bladeDaughterCard3MACAddress7Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 3 MAC address 7.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 32 }
bladeDaughterCard3MACAddress8Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 3 MAC address 8.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 33 }
bladeDaughterCard4MACAddress1Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 4 MAC address 1.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 34 }
bladeDaughterCard4MACAddress2Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 4 MAC address 2.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 35 }
bladeDaughterCard4MACAddress3Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 4 MAC address 3.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 36 }
bladeDaughterCard4MACAddress4Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 4 MAC address 4.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 37 }
bladeDaughterCard4MACAddress5Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 4 MAC address 5.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 38 }
bladeDaughterCard4MACAddress6Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 4 MAC address 6.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 39 }
bladeDaughterCard4MACAddress7Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 4 MAC address 7.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 40 }
bladeDaughterCard4MACAddress8Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 4 MAC address 8.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 41 }
bladeDaughterCard5MACAddress1Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 5 MAC address 1.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 42 }
bladeDaughterCard5MACAddress2Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 5 MAC address 2.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 43 }
bladeDaughterCard5MACAddress3Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 5 MAC address 3.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 44}
bladeDaughterCard5MACAddress4Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 5 MAC address 4.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 45 }
bladeDaughterCard5MACAddress5Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 5 MAC address 5.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 46 }
bladeDaughterCard5MACAddress6Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 5 MAC address 6.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 47 }
bladeDaughterCard5MACAddress7Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 5 MAC address 7.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 48 }
bladeDaughterCard5MACAddress8Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade expansion card (daughter card) 5 MAC address 8.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 49 }
bladeHSDaughterCard1MACAddress1Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade high speed expansion card (daughter card) 1 MAC address 1.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 100 }
bladeHSDaughterCard1MACAddress2Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade high speed expansion card (daughter card) 1 MAC address 2.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 101 }
bladeHSDaughterCard1MACAddress3Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade high speed expansion card (daughter card) 1 MAC address 3.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 102}
bladeHSDaughterCard1MACAddress4Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade high speed expansion card (daughter card) 1 MAC address 4.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 103 }
bladeHSDaughterCard1MACAddress5Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade high speed expansion card (daughter card) 1 MAC address 5.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 104 }
bladeHSDaughterCard1MACAddress6Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade high speed expansion card (daughter card) 1 MAC address 6.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 105 }
bladeHSDaughterCard1MACAddress7Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade high speed expansion card (daughter card) 1 MAC address 7.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 106 }
bladeHSDaughterCard1MACAddress8Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade high speed expansion card (daughter card) 1 MAC address 8.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 107 }
bladeSideCardMACAddress1Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade side card MAC address 1.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 164 }
bladeSideCardMACAddress2Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade side card MAC address 2.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 165 }
bladeSideCardMACAddress3Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade side card MAC address 3.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 166 }
bladeSideCardMACAddress4Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade side card MAC address 4.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 167 }
bladeSideCardMACAddress5Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade side card MAC address 5.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 168 }
bladeSideCardMACAddress6Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade side card MAC address 6.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 169 }
bladeSideCardMACAddress7Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade side card MAC address 7.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 170 }
bladeSideCardMACAddress8Vpd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade side card MAC address 8.
For consistent results, view as a table and not as individual entries."
::= { bladeMACAddressVpdEntry 171 }
-- ********************************************************************************
-- Blade Expansion Card VPD
-- ********************************************************************************
bladeExpCardVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeExpCardVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of VPD information for the blade expansion card components.
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpd 5 }
bladeExpCardVpdEntry OBJECT-TYPE
SYNTAX BladeExpCardVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD entry.
For consistent results, view as a table and not as individual entries."
INDEX { bladeExpCardVpdIndex }
::= { bladeExpCardVpdTable 1 }
BladeExpCardVpdEntry ::= SEQUENCE {
bladeExpCardVpdIndex INTEGER,
bladeExpCardVpdBayNumber OCTET STRING,
bladeExpCardVpdManufacturingId OCTET STRING,
bladeExpCardVpdFruNumber OCTET STRING,
bladeExpCardVpdHardwareRevision INTEGER,
bladeExpCardVpdSerialNumber OCTET STRING,
bladeExpCardVpdMachineType OCTET STRING,
bladeExpCardVpdUuid OCTET STRING,
bladeExpCardVpdManufDate OCTET STRING,
bladeExpCardVpdPartNumber OCTET STRING,
bladeExpCardVpdFruSerial OCTET STRING,
bladeExpCardVpdMachineModel OCTET STRING,
bladeExpCardVpdManufacturingIDNumber OCTET STRING,
bladeExpCardVpdProductId OCTET STRING,
bladeExpCardVpdSubManufacturerId OCTET STRING,
bladeExpCardVpdClei OCTET STRING,
bladeExpCardVpdBladeBayNumber OCTET STRING,
bladeExpCardVpdCardTypeInfo INTEGER,
bladeExpCardVpdHighSpeed INTEGER,
bladeExpCardVpdHardwareRevisionString OCTET STRING
}
bladeExpCardVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD index.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 1 }
bladeExpCardVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD Bay number.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 2 }
bladeExpCardVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 3 }
bladeExpCardVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD FRU number.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 4 }
bladeExpCardVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD hardware revision.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { bladeExpCardVpdEntry 5 }
bladeExpCardVpdSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD serial number.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 6 }
bladeExpCardVpdMachineType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD machine type.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 7 }
bladeExpCardVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD UUID.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 8 }
bladeExpCardVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD Manufacture Date.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 9 }
bladeExpCardVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD Part number.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 10 }
bladeExpCardVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD FRU serial number.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 11 }
bladeExpCardVpdMachineModel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD machine model.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 12 }
bladeExpCardVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD Manufacturer ID Number.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 13 }
bladeExpCardVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD Product ID.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 14 }
bladeExpCardVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD subsystem manufacturer ID.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 15 }
bladeExpCardVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD Common Language Equipment Identifier (CLEI).
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 16 }
bladeExpCardVpdBladeBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade bay number of the blade expansion card.
For consistent results, view as a table and not as individual entries."
::= { bladeExpCardVpdEntry 19 }
bladeExpCardVpdCardTypeInfo OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
bladeEthernetExpCard(1),
bladeFiberChannelExpCard(2),
serialPortExpCard(3),
bladeOpticalPassThrough(4),
bladeInfinibandExpCard(5),
bladeIscsiExpCard(6),
bladeGenericExpCard(7),
bladeNetworkCFFeExpCard(8),
bladeSASConnectivityCard(9),
bladeSATAConnectivityCard(10),
bladeNetworkCFFzExpCard(11),
bladeNetworkCNAExpCard(12)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD type code that describes the expansion
card. For consistent results, view as a table and not as individual entries.
NOTE: The CFFe expansion card is also referred to as a CFFh expansion card."
::= { bladeExpCardVpdEntry 21 }
bladeExpCardVpdHighSpeed OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1),
notApplicable(255)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card (daughter card) VPD high speed that indicates whether the
expansion card is high speed or not. For consistent results, view as a table and
not as individual entries."
::= { bladeExpCardVpdEntry 22 }
bladeExpCardVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade expansion card VPD hardware revision in string format.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { bladeExpCardVpdEntry 23 }
-- ********************************************************************************
-- Blade and expansion card WWN/GUIDs
-- ********************************************************************************
bladeAndExpCardWwnGuidVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeAndExpCardWwnGuidVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of World Wide Names (WWN), Global Unique IDs (GUID) and
Serial Attach SCSI IDs (SAS) of the blade server and its expansion
cards (daughter cards).
For consistent results, view as a table and not as individual entries."
::= { bladeHardwareVpd 7 }
bladeAndExpCardWwnGuidVpdEntry OBJECT-TYPE
SYNTAX BladeAndExpCardWwnGuidVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Blade WWN/GUID entries.
For consistent results, view as a table and not as individual entries."
INDEX { bladeAndExpCardWwnGuidVpdIndex }
::= { bladeAndExpCardWwnGuidVpdTable 1 }
BladeAndExpCardWwnGuidVpdEntry ::= SEQUENCE {
bladeAndExpCardWwnGuidVpdIndex INTEGER,
bladeAndExpCardWwnGuidVpdBayNumber OCTET STRING,
bladeAndExpCardWwnGuidVpdName OCTET STRING,
bladeAndExpCardWwnGuidVpdBladeBayNumber OCTET STRING,
bladeAndExpCardWwnGuidVpdType INTEGER,
bladeAndExpCardWwnGuidVpd1 OCTET STRING,
bladeAndExpCardWwnGuidVpd2 OCTET STRING,
bladeAndExpCardWwnGuidVpd3 OCTET STRING,
bladeAndExpCardWwnGuidVpd4 OCTET STRING,
bladeAndExpCardWwnGuidVpd5 OCTET STRING,
bladeAndExpCardWwnGuidVpd6 OCTET STRING,
bladeAndExpCardWwnGuidVpd7 OCTET STRING,
bladeAndExpCardWwnGuidVpd8 OCTET STRING
}
bladeAndExpCardWwnGuidVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card index.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 1 }
bladeAndExpCardWwnGuidVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card VPD bay number.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 2 }
bladeAndExpCardWwnGuidVpdName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The name of the blade or expansion card.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 3 }
bladeAndExpCardWwnGuidVpdBladeBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"For expansion cards, it's the blade bay number of the blade
expansion card. For blades, it's the bay number of the blade.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 4 }
bladeAndExpCardWwnGuidVpdType OBJECT-TYPE
SYNTAX INTEGER {
notAvailable(0),
wwn(1),
guid(2),
sas(3)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID/SAS Type.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 5 }
bladeAndExpCardWwnGuidVpd1 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID 1.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 6 }
bladeAndExpCardWwnGuidVpd2 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID 2.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 7 }
bladeAndExpCardWwnGuidVpd3 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID 3.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 8 }
bladeAndExpCardWwnGuidVpd4 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID 4.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 9 }
bladeAndExpCardWwnGuidVpd5 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID 5.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 10 }
bladeAndExpCardWwnGuidVpd6 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID 6.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 11 }
bladeAndExpCardWwnGuidVpd7 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID 7.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 12 }
bladeAndExpCardWwnGuidVpd8 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade or expansion card WWN/GUID 8.
For consistent results, view as a table and not as individual entries."
::= { bladeAndExpCardWwnGuidVpdEntry 13 }
-- ********************************************************************************
-- Blade managerment card vpd
-- ********************************************************************************
bladeManagementCardVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeManagementCardVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of VPD information for the blade
management card component.
For consistent results, view as a table
and not as individual entries."
::= { bladeHardwareVpd 8 }
bladeManagementCardVpdEntry OBJECT-TYPE
SYNTAX BladeManagementCardVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Blade management card VPD entry.
For consistent results, view as a table
and not as individual entries."
INDEX { bladeManagementCardVpdIndex }
::= { bladeManagementCardVpdTable 1 }
BladeManagementCardVpdEntry ::= SEQUENCE {
bladeManagementCardVpdIndex INTEGER,
bladeManagementCardVpdBayNumber OCTET STRING,
bladeManagementCardVpdManufacturingId OCTET STRING,
bladeManagementCardVpdFruNumber OCTET STRING,
bladeManagementCardVpdHardwareRevision INTEGER,
bladeManagementCardVpdSerialNumber OCTET STRING,
bladeManagementCardVpdMachineType OCTET STRING,
bladeManagementCardVpdUuid OCTET STRING,
bladeManagementCardVpdManufDate OCTET STRING,
bladeManagementCardVpdPartNumber OCTET STRING,
bladeManagementCardVpdFruSerial OCTET STRING,
bladeManagementCardVpdMachineModel OCTET STRING,
bladeManagementCardVpdManufacturingIDNumber OCTET STRING,
bladeManagementCardVpdProductId OCTET STRING,
bladeManagementCardVpdSubManufacturerId OCTET STRING,
bladeManagementCardVpdClei OCTET STRING,
bladeManagementCardVpdHardwareRevisionString OCTET STRING
}
bladeManagementCardVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD index.
For consistent results, view as a table
and not as individual entries."
::= { bladeManagementCardVpdEntry 1 }
bladeManagementCardVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD Bay number.
For consistent results, view as a table and
not as individual entries."
::= { bladeManagementCardVpdEntry 2 }
bladeManagementCardVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD manufacturing ID.
For consistent results, view as a table and not as
individual entries."
::= { bladeManagementCardVpdEntry 3 }
bladeManagementCardVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD FRU number.
For consistent results, view as a table and not
as individual entries."
::= { bladeManagementCardVpdEntry 4 }
bladeManagementCardVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD hardware revision.
For consistent results, view as a table and not as
individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { bladeManagementCardVpdEntry 5 }
bladeManagementCardVpdSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD serial number.
For consistent results, view as a table and not
as individual entries."
::= { bladeManagementCardVpdEntry 6 }
bladeManagementCardVpdMachineType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD machine type.
For consistent results, view as a table and not
as individual entries."
::= { bladeManagementCardVpdEntry 7 }
bladeManagementCardVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD UUID.
For consistent results, view as a table
and not as individual entries."
::= { bladeManagementCardVpdEntry 8 }
bladeManagementCardVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD Manufacture Date.
For consistent results, view as a table and not as
individual entries."
::= { bladeManagementCardVpdEntry 9 }
bladeManagementCardVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD Part number.
For consistent results, view as a table and not
as individual entries."
::= { bladeManagementCardVpdEntry 10 }
bladeManagementCardVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD FRU serial number.
For consistent results, view as a table and not as
individual entries."
::= { bladeManagementCardVpdEntry 11 }
bladeManagementCardVpdMachineModel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD machine model.
For consistent results, view as a table and not
as individual entries."
::= { bladeManagementCardVpdEntry 12 }
bladeManagementCardVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD manufacturer ID.
For consistent results, view as a table and not as
individual entries."
::= { bladeManagementCardVpdEntry 13 }
bladeManagementCardVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD Product ID.
For consistent results, view as a table and not
as individual entries."
::= { bladeManagementCardVpdEntry 14 }
bladeManagementCardVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD subsystem manufacturer ID.
For consistent results, view as a table and not as
individual entries."
::= { bladeManagementCardVpdEntry 15 }
bladeManagementCardVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD Common Language Equipment
Identifier (CLEI).
For consistent results, view as a table and not as
individual entries."
::= { bladeManagementCardVpdEntry 16 }
bladeManagementCardVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade management card VPD hardware revision in string format.
For consistent results, view as a table and not as
individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { bladeManagementCardVpdEntry 17 }
-- ********************************************************************************
-- Blade Firmware Level VPD
-- ********************************************************************************
bladeFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 5 }
-- ********************************************************************************
-- Blade BIOS Firmware Level VPD
-- ********************************************************************************
bladeBiosVPDTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeBiosVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of blade firmware vital product data (VPD) information."
::= { bladeFirmwareVpd 1 }
bladeBiosVPDEntry OBJECT-TYPE
SYNTAX BladeBiosVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Blade firmware VPD table entry"
INDEX { bladeBiosVpdIndex }
::= { bladeBiosVPDTable 1 }
BladeBiosVPDEntry ::= SEQUENCE {
bladeBiosVpdIndex INTEGER,
bladeBiosVpdId INTEGER,
bladeBiosVpdExists INTEGER,
bladeBiosVpdPowerState INTEGER,
bladeBiosVpdName OCTET STRING,
bladeBiosVpdBuildId OCTET STRING,
bladeBiosVpdRevision OCTET STRING,
bladeBiosVpdDate OCTET STRING,
bladeBiosVpdLevelStatus OCTET STRING
}
bladeBiosVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade firmware VPD table index."
::= { bladeBiosVPDEntry 1 }
bladeBiosVpdId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The numeric blade ID."
::= { bladeBiosVPDEntry 2 }
bladeBiosVpdExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeBiosVPDEntry 3 }
bladeBiosVpdPowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeBiosVPDEntry 4 }
bladeBiosVpdName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeBiosVPDEntry 5 }
bladeBiosVpdBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The build ID for the blade firmware."
::= { bladeBiosVPDEntry 6 }
bladeBiosVpdRevision OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The revision of the blade firmware."
::= { bladeBiosVPDEntry 7 }
bladeBiosVpdDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The date of the blade firmware."
::= { bladeBiosVPDEntry 8 }
bladeBiosVpdLevelStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The level status of the blade bios firmware build ID.
It has three possible values as Different (mismatch firmware build ID), Match (the
same firmware build ID), Unique (only one such firmware build ID)."
::= { bladeBiosVPDEntry 9 }
-- ********************************************************************************
-- Blade DIAGS Firmware Level VPD
-- ********************************************************************************
bladeDiagsVPDTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeDiagsVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of blade firmware vital product data (VPD) information."
::= { bladeFirmwareVpd 2 }
bladeDiagsVPDEntry OBJECT-TYPE
SYNTAX BladeDiagsVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Blade firmware VPD table entry"
INDEX { bladeDiagsVpdIndex }
::= { bladeDiagsVPDTable 1 }
BladeDiagsVPDEntry ::= SEQUENCE {
bladeDiagsVpdIndex INTEGER,
bladeDiagsVpdId INTEGER,
bladeDiagsVpdExists INTEGER,
bladeDiagsVpdPowerState INTEGER,
bladeDiagsVpdName OCTET STRING,
bladeDiagsVpdBuildId OCTET STRING,
bladeDiagsVpdRevision OCTET STRING,
bladeDiagsVpdDate OCTET STRING,
bladeDiagsVpdLevelStatus OCTET STRING
}
bladeDiagsVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade firmware VPD table index."
::= { bladeDiagsVPDEntry 1 }
bladeDiagsVpdId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The numeric blade ID."
::= { bladeDiagsVPDEntry 2 }
bladeDiagsVpdExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeDiagsVPDEntry 3 }
bladeDiagsVpdPowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeDiagsVPDEntry 4 }
bladeDiagsVpdName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeDiagsVPDEntry 5 }
bladeDiagsVpdBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The build ID for the blade firmware."
::= { bladeDiagsVPDEntry 6 }
bladeDiagsVpdRevision OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The revision of the blade firmware."
::= { bladeDiagsVPDEntry 7 }
bladeDiagsVpdDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The date of the blade firmware."
::= { bladeDiagsVPDEntry 8 }
bladeDiagsVpdLevelStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The level status of the blade diagnostics firmware build ID.
It has three possible values as Different (mismatch firmware build ID), Match (the
same firmware build ID), Unique (only one such firmware build ID)."
::= { bladeDiagsVPDEntry 9 }
-- ********************************************************************************
-- Blade Mgmt Processor Firmware Level VPD
-- ********************************************************************************
bladeSysMgmtProcVPDTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeSysMgmtProcVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of blade firmware vital product data (VPD) information."
::= { bladeFirmwareVpd 3 }
bladeSysMgmtProcVPDEntry OBJECT-TYPE
SYNTAX BladeSysMgmtProcVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Blade firmware VPD table entry"
INDEX { bladeSysMgmtProcVpdIndex }
::= { bladeSysMgmtProcVPDTable 1 }
BladeSysMgmtProcVPDEntry ::= SEQUENCE {
bladeSysMgmtProcVpdIndex INTEGER,
bladeSysMgmtProcVpdId INTEGER,
bladeSysMgmtProcVpdExists INTEGER,
bladeSysMgmtProcVpdPowerState INTEGER,
bladeSysMgmtProcVpdName OCTET STRING,
bladeSysMgmtProcVpdBuildId OCTET STRING,
bladeSysMgmtProcVpdRevision OCTET STRING,
bladeSysMgmtProcVpdLevelStatus OCTET STRING
}
bladeSysMgmtProcVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Blade firmware VPD table index."
::= { bladeSysMgmtProcVPDEntry 1 }
bladeSysMgmtProcVpdId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The numeric blade ID."
::= { bladeSysMgmtProcVPDEntry 2 }
bladeSysMgmtProcVpdExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeSysMgmtProcVPDEntry 3 }
bladeSysMgmtProcVpdPowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeSysMgmtProcVPDEntry 4 }
bladeSysMgmtProcVpdName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeSysMgmtProcVPDEntry 5 }
bladeSysMgmtProcVpdBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The build ID for the blade firmware."
::= { bladeSysMgmtProcVPDEntry 6 }
bladeSysMgmtProcVpdRevision OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The revision of the blade firmware."
::= { bladeSysMgmtProcVPDEntry 7 }
bladeSysMgmtProcVpdLevelStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The level status of the blade system management processor firmware build ID.
It has three possible values as Different (mismatch firmware build ID), Match (the
same firmware build ID), Unique (only one such firmware build ID)."
::= { bladeSysMgmtProcVPDEntry 8 }
-- ********************************************************************************
-- Switch Module Hardware VPD
-- ********************************************************************************
smHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 6 }
smHardwareVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of the switch module hardware components.
For consistent results, view as a table and not as
individual entries."
::= { smHardwareVpd 1 }
smHardwareVpdEntry OBJECT-TYPE
SYNTAX SmHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD entry.
For consistent results, view as a table and
not as individual entries."
INDEX { smHardwareVpdIndex }
::= { smHardwareVpdTable 1 }
SmHardwareVpdEntry ::= SEQUENCE {
smHardwareVpdIndex INTEGER,
smHardwareVpdBayNumber OCTET STRING,
smHardwareVpdManufacturingId OCTET STRING,
smHardwareVpdFruNumber OCTET STRING,
smHardwareVpdHardwareRevision INTEGER,
smHardwareVpdUuid OCTET STRING,
smHardwareVpdManufDate OCTET STRING,
smHardwareVpdPartNumber OCTET STRING,
smHardwareVpdFruSerial OCTET STRING,
smHardwareVpdManufacturingIDNumber OCTET STRING,
smHardwareVpdProductId OCTET STRING,
smHardwareVpdSubManufacturerId OCTET STRING,
smHardwareVpdClei OCTET STRING,
smHardwareVpdWwnGuid OCTET STRING,
smHardwareVpdWwnGuidType OCTET STRING,
smHardwareVpdWidth INTEGER,
smHardwareVpdHardwareRevisionString OCTET STRING
}
smHardwareVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD index.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 1 }
smHardwareVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD Bay number.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 2 }
smHardwareVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 3 }
smHardwareVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD FRU number.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 4 }
smHardwareVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD hardware revision.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { smHardwareVpdEntry 5 }
smHardwareVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD UUID.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 8 }
smHardwareVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD manufacture date.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 9 }
smHardwareVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD Part Number.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 10 }
smHardwareVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD FRU Serial.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 11 }
smHardwareVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD manufacturer ID.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 12 }
smHardwareVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD product ID.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 13 }
smHardwareVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD subsystem manufacturer ID.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 14 }
smHardwareVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD Common Language Equipment Identifier (CLEI).
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 15 }
smHardwareVpdWwnGuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD World Wide Name or Global Unique ID.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 16 }
smHardwareVpdWwnGuidType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The WWN/GUID/SAS entry is actually World Wide Name, Global Unique ID
or Serial Attach SCSI ID.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 17 }
smHardwareVpdWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The width of the switch module hardware.
For consistent results, view as a table and not as individual entries."
::= { smHardwareVpdEntry 18 }
smHardwareVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module hardware VPD hardware revision in string format.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { smHardwareVpdEntry 20 }
-- ********************************************************************************
-- Switch module firmware VPD
-- ********************************************************************************
smFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 7 }
-- ********************************************************************************
-- Switch module main application firmware VPD
-- ********************************************************************************
smMainAppVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmMainAppVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Switch module main application VPD information table."
::= {smFirmwareVpd 1}
smMainAppVpdEntry OBJECT-TYPE
SYNTAX SmMainAppVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Switch module main application VPD table entry"
INDEX { smMainAppVpdIndex }
::= { smMainAppVpdTable 1 }
SmMainAppVpdEntry ::= SEQUENCE {
smMainAppVpdIndex INTEGER,
smMainAppVpdId INTEGER,
smMainAppVpdExists INTEGER,
smMainAppVpdSwitchType INTEGER,
smMainApp1VpdBuildId OCTET STRING,
smMainApp1VpdBuildDate OCTET STRING,
smMainApp1VpdRevisionNumber OCTET STRING,
smMainApp2VpdBuildId OCTET STRING,
smMainApp2VpdBuildDate OCTET STRING,
smMainApp2VpdRevisionNumber OCTET STRING,
smMainApp3VpdBuildId OCTET STRING,
smMainApp3VpdBuildDate OCTET STRING,
smMainApp3VpdRevisionNumber OCTET STRING,
smMainAppVpdSwitchSubType INTEGER
}
smMainAppVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module main application VPD entry index."
::= { smMainAppVpdEntry 1 }
smMainAppVpdId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4),
module5(5),
module6(6),
module7(7),
module8(8),
module9(9),
module10(10)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The switch module numeric identifier."
::= { smMainAppVpdEntry 2 }
smMainAppVpdExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the switch module specified exists or not."
::= { smMainAppVpdEntry 3 }
smMainAppVpdSwitchType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ethernet(1),
fibre(2),
opm(3),
serialCM(4),
copperPassThrough(5),
infiniband(6),
highSpeed(20),
passThrough(30),
sas(40)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the type of switch module installed."
::= { smMainAppVpdEntry 4 }
smMainApp1VpdBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware build id."
::= { smMainAppVpdEntry 5 }
smMainApp1VpdBuildDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware build date."
::= { smMainAppVpdEntry 6 }
smMainApp1VpdRevisionNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware revision number."
::= { smMainAppVpdEntry 7 }
smMainApp2VpdBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware build id."
::= { smMainAppVpdEntry 8 }
smMainApp2VpdBuildDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware build date."
::= { smMainAppVpdEntry 9 }
smMainApp2VpdRevisionNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware revision number."
::= { smMainAppVpdEntry 10 }
smMainApp3VpdBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"I/O Module firmware build id."
::= { smMainAppVpdEntry 11 }
smMainApp3VpdBuildDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"I/O Module firmware build date."
::= { smMainAppVpdEntry 12 }
smMainApp3VpdRevisionNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"I/O Module firmware revision number."
::= { smMainAppVpdEntry 13 }
smMainAppVpdSwitchSubType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ethernet(1),
fibre(2),
infiniband(6),
sas(7),
raidsas(8),
icpm(9)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the subtype of switch module installed."
::= { smMainAppVpdEntry 20 }
-- ********************************************************************************
-- Switch module boot ROM firmware VPD
-- ********************************************************************************
smBootRomVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmBootRomVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Switch module boot ROM VPD information table."
::= {smFirmwareVpd 2}
smBootRomVpdEntry OBJECT-TYPE
SYNTAX SmBootRomVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Switch module boot ROM VPD table entry"
INDEX { smBootRomVpdIndex }
::= { smBootRomVpdTable 1 }
SmBootRomVpdEntry ::= SEQUENCE {
smBootRomVpdIndex INTEGER,
smBootRomVpdId INTEGER,
smBootRomVpdExists INTEGER,
smBootRomVpdSwitchType INTEGER,
smBootRomVpdBuildId OCTET STRING,
smBootRomVpdBuildDate OCTET STRING,
smBootRomVpdRevisionNumber OCTET STRING,
smBootRomVpdSwitchSubType INTEGER
}
smBootRomVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module boot ROM VPD entry index."
::= { smBootRomVpdEntry 1 }
smBootRomVpdId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4),
module5(5),
module6(6),
module7(7),
module8(8),
module9(9),
module10(10)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The switch module numeric identifier."
::= { smBootRomVpdEntry 2 }
smBootRomVpdExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the switch module specified exists or not."
::= { smBootRomVpdEntry 3 }
smBootRomVpdSwitchType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ethernet(1),
fibre(2),
opm(3),
serialCM(4),
copperPassThrough(5),
infiniband(6),
highSpeed(20),
passThrough(30),
sas(40)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the type of switch module installed."
::= { smBootRomVpdEntry 4 }
smBootRomVpdBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware build ID."
::= { smBootRomVpdEntry 5 }
smBootRomVpdBuildDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware build date."
::= { smBootRomVpdEntry 6 }
smBootRomVpdRevisionNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Switch module firmware revision number."
::= { smBootRomVpdEntry 7 }
smBootRomVpdSwitchSubType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ethernet(1),
fibre(2),
infiniband(6),
sas(7),
raidsas(8),
icpm(9)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the subtype of switch module installed."
::= { smBootRomVpdEntry 8 }
-- ********************************************************************************
-- Power Module Hardware VPD
-- ********************************************************************************
pmHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 8 }
pmHardwareVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of the power module hardware components.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpd 1 }
pmHardwareVpdEntry OBJECT-TYPE
SYNTAX PmHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Power module hardware VPD entry.
For consistent results, view as a table and not as individual entries."
INDEX { pmHardwareVpdIndex }
::= { pmHardwareVpdTable 1 }
PmHardwareVpdEntry ::= SEQUENCE {
pmHardwareVpdIndex INTEGER,
pmHardwareVpdBayNumber OCTET STRING,
pmHardwareVpdManufacturingId OCTET STRING,
pmHardwareVpdFruNumber OCTET STRING,
pmHardwareVpdHardwareRevision INTEGER,
pmHardwareVpdUuid OCTET STRING,
pmHardwareVpdManufDate OCTET STRING,
pmHardwareVpdPartNumber OCTET STRING,
pmHardwareVpdFruSerial OCTET STRING,
pmHardwareVpdManufacturingIDNumber OCTET STRING,
pmHardwareVpdProductId OCTET STRING,
pmHardwareVpdSubManufacturerId OCTET STRING,
pmHardwareVpdClei OCTET STRING,
pmHardwareVpdHardwareRevisionString OCTET STRING
}
pmHardwareVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD index.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 1 }
pmHardwareVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD Bay number.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 2 }
pmHardwareVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 3 }
pmHardwareVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD FRU number.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 4 }
pmHardwareVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD hardware revision.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { pmHardwareVpdEntry 5 }
pmHardwareVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD UUID.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 8 }
pmHardwareVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD Manufacture Date.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 9 }
pmHardwareVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD Part Number.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 10 }
pmHardwareVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD FRU Serial.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 11 }
pmHardwareVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD manufacturer ID.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 12 }
pmHardwareVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD product ID.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 13 }
pmHardwareVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD subsystem manufacturer ID.
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 14 }
pmHardwareVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD Common Language Equipment Identifier (CLEI).
For consistent results, view as a table and not as individual entries."
::= { pmHardwareVpdEntry 15 }
pmHardwareVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power module hardware VPD hardware revision in string format.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { pmHardwareVpdEntry 16 }
-- ********************************************************************************
-- Rear LED Card Hardware VPD (was Media Tray)
-- ********************************************************************************
rearLEDCardHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 9 }
rearLEDCardHardwareVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD manufacturing ID.
For consistent results, view as a table and not as individual entries."
::= { rearLEDCardHardwareVpd 3 }
rearLEDCardHardwareVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD FRU number.
For consistent results, view as a table and not as individual entries."
::= { rearLEDCardHardwareVpd 4 }
rearLEDCardHardwareVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD hardware revision.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then the HardwareRevisionString version of this MIB object should be used."
::= { rearLEDCardHardwareVpd 5 }
rearLEDCardHardwareVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD UUID.
For consistent results, view as a table and not as individual entries."
::= { rearLEDCardHardwareVpd 8 }
rearLEDCardHardwareVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD manufacturer ID.
For consistent results, view as a table and not as individual entries."
::= { rearLEDCardHardwareVpd 9 }
rearLEDCardHardwareVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD product ID.
For consistent results, view as a table and not as individual entries."
::= { rearLEDCardHardwareVpd 10 }
rearLEDCardHardwareVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD subsystem manufacturer ID.
For consistent results, view as a table and not as individual entries."
::= { rearLEDCardHardwareVpd 11 }
rearLEDCardHardwareVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD Common Language Equipment Identifier (CLEI).
For consistent results, view as a table and not as individual entries."
::= { rearLEDCardHardwareVpd 12 }
rearLEDCardHardwareVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD hardware revision in string format.
For consistent results, view as a table and not as individual entries.
If a hardware revision is programmed in the OEM VPD area for this component,
then this MIB object should be used."
::= { rearLEDCardHardwareVpd 17 }
rearLEDCardHardwareVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD Manufacture Date."
::= { rearLEDCardHardwareVpd 18 }
rearLEDCardHardwareVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD Part Number."
::= { rearLEDCardHardwareVpd 19 }
rearLEDCardHardwareVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Rear LED card hardware VPD FRU Serial."
::= { rearLEDCardHardwareVpd 20 }
-- ********************************************************************************
-- Chassis fan firmware level VPD
-- ********************************************************************************
chassisFanFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 12 }
chassisFanControllerVPDTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChassisFanControllerVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of chassis fan controller firmware vital product data (VPD) information."
::= { chassisFanFirmwareVpd 1 }
chassisFanControllerVPDEntry OBJECT-TYPE
SYNTAX ChassisFanControllerVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Chassis fan controller firmware VPD table entry"
INDEX { chassisFanControllerVpdIndex }
::= { chassisFanControllerVPDTable 1 }
ChassisFanControllerVPDEntry ::= SEQUENCE {
chassisFanControllerVpdIndex INTEGER,
chassisFanControllerVpdId INTEGER,
chassisFanControllerVpdExists INTEGER,
chassisFanControllerVpdRevision OCTET STRING
}
chassisFanControllerVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan controller firmware VPD table index."
::= { chassisFanControllerVPDEntry 1 }
chassisFanControllerVpdId OBJECT-TYPE
SYNTAX INTEGER {
chassisFan1(1),
chassisFan2(2),
chassisFan3(3),
chassisFan4(4),
chassisFan5(5),
chassisFan6(6),
chassisFan7(7),
chassisFan8(8),
chassisFan9(9),
chassisFan10(10)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The numeric chassis fan ID."
::= { chassisFanControllerVPDEntry 2 }
chassisFanControllerVpdExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the chassis fan specified exists or not."
::= { chassisFanControllerVPDEntry 3 }
chassisFanControllerVpdRevision OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The revision of the chassis fan controller firmware."
::= { chassisFanControllerVPDEntry 7 }
-- ********************************************************************************
-- Chassis fan hardware VPD
-- ********************************************************************************
chassisFanHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 13 }
chassisFanHardwareVpdTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChassisFanHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of the chassis fan hardware components."
::= { chassisFanHardwareVpd 1 }
chassisFanHardwareVpdEntry OBJECT-TYPE
SYNTAX ChassisFanHardwareVpdEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD entry."
INDEX { chassisFanHardwareVpdIndex }
::= { chassisFanHardwareVpdTable 1 }
ChassisFanHardwareVpdEntry ::= SEQUENCE {
chassisFanHardwareVpdIndex INTEGER,
chassisFanHardwareVpdBayNumber OCTET STRING,
chassisFanHardwareVpdManufacturingId OCTET STRING,
chassisFanHardwareVpdFruNumber OCTET STRING,
chassisFanHardwareVpdHardwareRevision INTEGER,
chassisFanHardwareVpdUuid OCTET STRING,
chassisFanHardwareVpdManufDate OCTET STRING,
chassisFanHardwareVpdPartNumber OCTET STRING,
chassisFanHardwareVpdFruSerial OCTET STRING,
chassisFanHardwareVpdManufacturingIDNumber OCTET STRING,
chassisFanHardwareVpdProductId OCTET STRING,
chassisFanHardwareVpdSubManufacturerId OCTET STRING,
chassisFanHardwareVpdClei OCTET STRING,
chassisFanHardwareVpdHardwareRevisionString OCTET STRING
}
chassisFanHardwareVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD index."
::= { chassisFanHardwareVpdEntry 1 }
chassisFanHardwareVpdBayNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD Bay number."
::= { chassisFanHardwareVpdEntry 2 }
chassisFanHardwareVpdManufacturingId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD manufacturing ID."
::= { chassisFanHardwareVpdEntry 3 }
chassisFanHardwareVpdFruNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD FRU number."
::= { chassisFanHardwareVpdEntry 4 }
chassisFanHardwareVpdHardwareRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD hardware revision."
::= { chassisFanHardwareVpdEntry 5 }
chassisFanHardwareVpdUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD UUID."
::= { chassisFanHardwareVpdEntry 8 }
chassisFanHardwareVpdManufDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD manufacture Date."
::= { chassisFanHardwareVpdEntry 9 }
chassisFanHardwareVpdPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD Part Number."
::= { chassisFanHardwareVpdEntry 10 }
chassisFanHardwareVpdFruSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD FRU serial number."
::= { chassisFanHardwareVpdEntry 11 }
chassisFanHardwareVpdManufacturingIDNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD manufacturer ID."
::= { chassisFanHardwareVpdEntry 12 }
chassisFanHardwareVpdProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD product ID."
::= { chassisFanHardwareVpdEntry 13 }
chassisFanHardwareVpdSubManufacturerId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD subsystem manufacturer ID."
::= { chassisFanHardwareVpdEntry 14 }
chassisFanHardwareVpdClei OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD Common Language Equipment Identifier (CLEI)."
::= { chassisFanHardwareVpdEntry 15 }
chassisFanHardwareVpdHardwareRevisionString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Chassis fan hardware VPD hardware revision in string format."
::= { chassisFanHardwareVpdEntry 16 }
-- ********************************************************************************
-- Power Module Firmware Level VPD
-- ********************************************************************************
pmFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 14 }
pmControllerVPDTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmControllerVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of Power Module controller firmware vital product data (VPD) information."
::= { pmFirmwareVpd 1 }
pmControllerVPDEntry OBJECT-TYPE
SYNTAX PmControllerVPDEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Power Module controller firmware VPD table entry"
INDEX { pmControllerVpdIndex }
::= { pmControllerVPDTable 1 }
PmControllerVPDEntry ::= SEQUENCE {
pmControllerVpdIndex INTEGER,
pmControllerVpdId INTEGER,
pmControllerVpdExists INTEGER,
pmControllerVpdRevision OCTET STRING
}
pmControllerVpdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Power Module controller firmware VPD table index."
::= { pmControllerVPDEntry 1 }
pmControllerVpdId OBJECT-TYPE
SYNTAX INTEGER {
powerModule1(1),
powerModule2(2),
powerModule3(3),
powerModule4(4),
powerModule5(5),
powerModule6(6)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The numeric Power Module ID."
::= { pmControllerVPDEntry 2 }
pmControllerVpdExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the Power Module specified exists or not."
::= { pmControllerVPDEntry 3 }
pmControllerVpdRevision OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The revision of the Power Module controller firmware."
::= { pmControllerVPDEntry 7 }
-- ********************************************************************************
-- Reload VPD
-- ********************************************************************************
reloadVpdData OBJECT IDENTIFIER ::= { vpdInformation 23 }
reloadAllVpdData OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reload all VPD data (firmware, hardware, MAC address, WWN/GUID and other Unique ID).
NOTE: The value returned for the GET command is meaningless."
::= { reloadVpdData 1 }
reloadFwVpdData OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reload firmware VPD data.
NOTE: The value returned for the GET command is meaningless."
::= { reloadVpdData 2 }
reloadHwVpdData OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reload hardware VPD data.
NOTE: The value returned for the GET command is meaningless."
::= { reloadVpdData 3 }
reloadMACAddress OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reload blade MAC addresses.
NOTE: The value returned for the GET command is meaningless."
::= { reloadVpdData 4 }
reloadWwnGuidVpdData OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reload blade and I/O module WWN/GUID and other VPD data.
NOTE: The value returned for the GET command is meaningless."
::= { reloadVpdData 5 }
-- *************************************************************************
-- Passive Air Filter
-- *************************************************************************
airFilter OBJECT IDENTIFIER ::= { monitors 22 }
passiveAirFilter OBJECT IDENTIFIER ::= { airFilter 1 }
passiveAirFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable/Reset the passive air filter. When enabled, sending
an enable or reset will reset the replace date."
::= { passiveAirFilter 1 }
passiveAirFilterMonthFreq OBJECT-TYPE
SYNTAX INTEGER {
oneMonth(1),
threeMonths(3),
sixMonths(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The chassis environment. 1 month indicates high dust, 3 months indicates
moderate dust and, 6 months indicates low dust."
::= { passiveAirFilter 2 }
passiveAirFilterReplaceDate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..30))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The scheduled replacement date of the air filter."
::= { passiveAirFilter 3 }
-- *************************************************************************
-- Component Information
--
-- This anchor is for a new set of tables that provide information about all
-- of the components in the chassis. For example, the componentInventoryTable
-- provides inventory information for all components in a single table and the
-- componentFirmwareTable provides firmware information for all components in
-- a single table. In previously defined tables, this information was
-- scattered about several tables, while this new concept provides a more
-- concise presentation.
--
-- The objects under the componentInformation anchor replace most of the legacy
-- objects defined under the vpdInformation anchor. Please see the block
-- comment at the start of that section for details.
--
-- *************************************************************************
componentInformation OBJECT IDENTIFIER ::= { monitors 23 }
-- *************************************************************************
-- Component Inventory Information
-- *************************************************************************
componentInventory OBJECT IDENTIFIER ::= { componentInformation 1 }
componentInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentInventoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component inventory information. Not all components will
provide every object defined in the ComponentInventoryEntry. Also,
if a component does not have inventory information or the CMM is not able
to read the data from the device, then there will not be a row in
this table for the component."
::= { componentInventory 1 }
componentInventoryEntry OBJECT-TYPE
SYNTAX ComponentInventoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component inventory information."
INDEX { componentInventoryTopologyPath }
::= { componentInventoryTable 1 }
ComponentInventoryEntry ::= SEQUENCE {
componentInventoryTopologyPath OCTET STRING,
componentInventoryInstance INTEGER,
componentInventoryDescription OCTET STRING,
componentInventoryMachineTypeModel OCTET STRING,
componentInventoryMachineSerial OCTET STRING,
componentInventoryAssetID OCTET STRING,
componentInventoryPartNumber OCTET STRING,
componentInventoryFRUNumber OCTET STRING,
componentInventoryFRUSerialNumber OCTET STRING,
componentInventoryManufacture OCTET STRING,
componentInventoryHardwareRevision OCTET STRING,
componentInventoryManufactureDate OCTET STRING,
componentInventoryUUID OCTET STRING,
componentInventoryProductID OCTET STRING,
componentInventorySubManufactureID OCTET STRING,
componentInventoryCLEI OCTET STRING,
componentInventoryAssetTag OCTET STRING,
componentInventorySpeed OCTET STRING,
componentInventoryIdentifier OCTET STRING,
componentInventorySize INTEGER,
componentInventoryMemoryType INTEGER,
componentInventoryProductName OCTET STRING,
componentInventoryProductVersion OCTET STRING,
componentInventoryProcessorType INTEGER,
componentInventoryProcessorFamily OCTET STRING,
componentInventoryProcessorCores OCTET STRING,
componentInventoryProcessorThreads OCTET STRING,
componentInventoryProcessorL1DCache OCTET STRING,
componentInventoryProcessorL1ICache OCTET STRING,
componentInventoryProcessorL2Cache OCTET STRING,
componentInventoryProcessorL3Cache OCTET STRING,
componentInventoryProcessorVoltage OCTET STRING,
componentInventoryProcessorExtClock OCTET STRING,
componentInventoryProcessorDataWidth OCTET STRING,
componentInventoryManufactureIDNum INTEGER,
componentInventoryGlobalID OCTET STRING
}
componentInventoryTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a row in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component inventory table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX, 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentInventoryEntry 1 }
componentInventoryInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot number or instance of a particular component. Typically,
if the component plugs into the chassis, this represents the slot
number. However, some components are connected to another component,
and this represents the instance. For example, a blade may have
several expansion cards that connect to the blade system planar,
and in this case, this value identifies which expansion card
instance the row represents.
Note that this slot/instance value can be determined from the
componentInventoryTopologyPath object, but this
componentInventoryInstance object is provided as a convenience
to the user."
::= { componentInventoryEntry 2 }
componentInventoryDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A short text string describing the particular component.
If a text string is not available, a value of
'Not available' is presented.
For more detail, also refer to the componentInventoryProductName
object in this table or the componentXXXXName object of any of the
other component tables under the 'components' section of the MIB."
::= { componentInventoryEntry 3 }
componentInventoryMachineTypeModel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The machine type and model number of this component. Typically,
the format is XXXXYYY, where XXXX reprsents the machine type
and YYY represents the model number."
::= { componentInventoryEntry 4 }
componentInventoryMachineSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The machine serial number of this component."
::= { componentInventoryEntry 5 }
componentInventoryAssetID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The asset identifier of this component, typically set by some
other authority than the
manufacturer."
::= { componentInventoryEntry 6 }
componentInventoryPartNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The part number of this component."
::= { componentInventoryEntry 7 }
componentInventoryFRUNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Field Replaceable Unit (FRU) number of this component."
::= { componentInventoryEntry 8 }
componentInventoryFRUSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Field Replaceable Unit (FRU) serial number of this component."
::= { componentInventoryEntry 9 }
componentInventoryManufacture OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The text description of the manufacturer of this component."
::= { componentInventoryEntry 10 }
componentInventoryHardwareRevision OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision number of the this component."
::= { componentInventoryEntry 11 }
componentInventoryManufactureDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when the manufacturer created this component. The format
is XXYY, where XX is the week number of the year 20YY."
::= { componentInventoryEntry 12 }
componentInventoryUUID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Universally Unique IDentifier (UUID) of this component, represented
as a 16 byte hex number."
::= { componentInventoryEntry 13 }
componentInventoryProductID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product identifier of the component assigned by the
manufacturer."
::= { componentInventoryEntry 14 }
componentInventorySubManufactureID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The text sub-description of the manufacturer of this component, often
used to identify a supplier for a component which has multiple
suppliers."
::= { componentInventoryEntry 15 }
componentInventoryCLEI OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Common Language Equipment Identifier (CLEI) of this component."
::= { componentInventoryEntry 16 }
componentInventoryAssetTag OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The asset tag of this component."
::= { componentInventoryEntry 17 }
componentInventorySpeed OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A speed designation for the component, for example, processor
speed."
::= { componentInventoryEntry 18 }
componentInventoryIdentifier OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique identifier assigned by the manufacturer to the
component, for example,
a processor ID."
::= { componentInventoryEntry 19 }
componentInventorySize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A size designation for the component, for example, a memory
DIMM size
or hard drive capacity."
::= { componentInventoryEntry 20 }
componentInventoryMemoryType OBJECT-TYPE
SYNTAX INTEGER {
fpmdram(1),
edo(2),
edodram(3),
sdram(4),
multiplexedram(5),
ddrsgram(6),
ddrsdram(7),
ddr2sdrm(8),
ddr3sdram(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The architecture specification of a memory device."
::= { componentInventoryEntry 21 }
componentInventoryProductName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product name assigned by the manufacturer for this component.
For more detail, also refer to the componentInventoryDescription
object."
::= { componentInventoryEntry 22 }
componentInventoryProductVersion OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product version assigned by the manufacturer for this
component."
::= { componentInventoryEntry 23 }
componentInventoryProcessorType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
central(3),
math(4),
dsp(5),
video(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type designation for processor components."
::= { componentInventoryEntry 24 }
componentInventoryProcessorFamily OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The family designation for processor components."
::= { componentInventoryEntry 25 }
componentInventoryProcessorCores OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of cores present on a processor component."
::= { componentInventoryEntry 26 }
componentInventoryProcessorThreads OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of threads present on a processor component."
::= { componentInventoryEntry 27 }
componentInventoryProcessorL1DCache OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The level 1 data cache size of a processor component."
::= { componentInventoryEntry 28 }
componentInventoryProcessorL1ICache OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The level 1 instruction cache size of a processor component."
::= { componentInventoryEntry 29 }
componentInventoryProcessorL2Cache OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The level 2 cache size of a processor component."
::= { componentInventoryEntry 30 }
componentInventoryProcessorL3Cache OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The level 3 cache size of a processor component."
::= { componentInventoryEntry 31 }
componentInventoryProcessorVoltage OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The voltage rating for a processor component."
::= { componentInventoryEntry 32 }
componentInventoryProcessorExtClock OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The external clock speed of a processor component."
::= { componentInventoryEntry 33 }
componentInventoryProcessorDataWidth OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum data bus width capability of a processor component,
expressed typically in bits."
::= { componentInventoryEntry 34 }
componentInventoryManufactureIDNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The identification number assigned for the component by the manufacturer."
::= { componentInventoryEntry 35 }
componentInventoryGlobalID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The global identifier (GLID) of this component. This ID is a
unique identifier for the CMM chassis (midplane), set by the
manufacturer.
This ID and the associated inventory is passed back to IBM
via the Electronic Service Agent and the Call Home feature.
This ID and the accompanying chassis inventory will be
stored and retained resulting in a
configuration/change history file of the inventory for a
chassis associated with a particular GLID.
This ID can be used by a customer to identify and categorize
all the content that resides within a chassis, much like a
physical serial number is associated with a single box
server."
::= { componentInventoryEntry 41 }
-- *************************************************************************
-- componentInventoryTableCacheTimeout
-- *************************************************************************
componentInventoryTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentInventoryTable.
This value is static (constant) and cannot be set."
::= { componentInventory 2 }
-- *************************************************************************
-- Component Firmware Information
-- *************************************************************************
componentFirmware OBJECT IDENTIFIER ::= { componentInformation 2 }
componentFirmwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentFirmwareEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component firmware information. Not all components will
provide every object defined in the ComponentFirmwareEntry."
::= { componentFirmware 1 }
componentFirmwareEntry OBJECT-TYPE
SYNTAX ComponentFirmwareEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component firmware information."
INDEX { componentFirmwareTopologyPath, componentFirmwareIndex }
::= { componentFirmwareTable 1 }
ComponentFirmwareEntry ::= SEQUENCE {
componentFirmwareTopologyPath OCTET STRING,
componentFirmwareIndex INTEGER,
componentFirmwareComponentInstance INTEGER,
componentFirmwareComponentDescription OCTET STRING,
componentFirmwareType OCTET STRING,
componentFirmwareBuildID OCTET STRING,
componentFirmwareReleaseDate OCTET STRING,
componentFirmwareFilename OCTET STRING,
componentFirmwareRevision OCTET STRING,
componentFirmwareRevisionMajor INTEGER,
componentFirmwareRevisionMinor INTEGER,
componentFirmwareLevelStatus OCTET STRING,
componentFirmwarePendingBuildID OCTET STRING,
componentFirmwarePendingReleaseDate OCTET STRING,
componentFirmwarePendingRevision OCTET STRING,
componentFirmwareReleaseLevel OCTET STRING,
componentFirmwareImageStatus INTEGER,
componentFirmwareRole OCTET STRING,
componentFirmwareTypeID INTEGER
}
componentFirmwareTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component firmware table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX, 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentFirmwareEntry 1 }
componentFirmwareIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each component may have one or more types of firmware associated with it, and this index object
identifies the particular instance."
::= { componentFirmwareEntry 2 }
componentFirmwareComponentInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot number or instance of a particular component. Typically,
if the component plugs into the chassis, this represents the slot
number. However, some components are connected to another component,
and this represents the instance. For example, a blade may have
several expansion cards that connect to the blade system planar,
and in this case, this value identifies which expansion card
instance the row represents.
Note that this slot/instance value can be determined from the
componentFirmwareTopologyPath object, but this
componentFirmwareComponentInstance object is provided as a convenience
to the user."
::= { componentFirmwareEntry 3 }
componentFirmwareComponentDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A short text string describing the particular component. For the
MM and blades, this name will be the configured name or its
serial number if no user configured name is available. For all
other components, this object will provide text to identify the
component. If a text string is not available, a value of
'Not available' is presented.
For more detail, also refer to the componentInventoryProductName
object."
::= { componentFirmwareEntry 4 }
componentFirmwareType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the type of firmware load."
::= { componentFirmwareEntry 5 }
componentFirmwareBuildID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the build identifier for this firmware load."
::= { componentFirmwareEntry 6 }
componentFirmwareReleaseDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the release date for this firmware load."
::= { componentFirmwareEntry 7 }
componentFirmwareFilename OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the filename of this firmware load."
::= { componentFirmwareEntry 8 }
componentFirmwareRevision OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the revision level of this firmware load."
::= { componentFirmwareEntry 9 }
componentFirmwareRevisionMajor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A numeric identifier of the revision major number for this firmware load."
::= { componentFirmwareEntry 10 }
componentFirmwareRevisionMinor OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A numeric identifier of the revision minor number for this firmware load."
::= { componentFirmwareEntry 11 }
componentFirmwareLevelStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The level status of the firmware build ID.
It has three possible values as Different (mismatch firmware build ID), Match (the
same firmware build ID), Unique (only one such firmware build ID)."
::= { componentFirmwareEntry 12 }
componentFirmwarePendingBuildID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the build identifier for this pending firmware load."
::= { componentFirmwareEntry 13 }
componentFirmwarePendingReleaseDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the release date for this pending firmware load."
::= { componentFirmwareEntry 14 }
componentFirmwarePendingRevision OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the revision level of this pending firmware load."
::= { componentFirmwareEntry 15 }
componentFirmwareReleaseLevel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the firmware release level this firmware load."
::= { componentFirmwareEntry 16 }
componentFirmwareImageStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1),
na(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether this firmware image is the
active (1) firmware,otherwise this firmware image is inactive (0)."
::= { componentFirmwareEntry 17 }
componentFirmwareRole OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description with the firmware image information."
::= { componentFirmwareEntry 18 }
componentFirmwareTypeID OBJECT-TYPE
SYNTAX INTEGER {
bladeFwBios(1),
bladeDiagnostics(2),
bladeSysMgmtProcessor(3),
bladeFpga(4),
bladecKVM(5),
bladeMP(6),
bladeUEFI(7),
bladeDSA(8),
switchModuleMainAppl(40),
switchModuleMainAppl1(41),
switchModuleMainAppl2(42),
switchModuleBootROM(43),
mgmtModuleMainAppl(61),
mgmtModuleMainApplPendingRestart(62),
fanController(81),
powerSupplyFirmware(91),
powerSupplyFanController(92),
expansionCardGeneric(101),
expansionCardEfi(102),
expansionCardFcode(103),
expansionCardBios(104),
expansionCardMain(105),
expansionCardMulti(106),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the type of firmware load with a numeric identifier."
::= { componentFirmwareEntry 20 }
-- *************************************************************************
-- componentFirmwareTableCacheTimeout
-- *************************************************************************
componentFirmwareTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentFirmwareTable.
This value is static (constant) and cannot be set."
::= { componentFirmware 2 }
componentInventoryReady OBJECT-TYPE
SYNTAX INTEGER {
notReady(0),
ready(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When a blade management controller, switch or the MM is reset, the
inventory data is refreshed in the MM database. This includes
items like IBM VPD (e.g. - serial number, UUID) and MAC address information.
Applications need to know when this information has been populated on the MM
before they begin to query it using SNMP or other means. This simple flag
object will return a ready or notReady indication when all blades and switches
have completed initialization and the inventory information has been provided
to the MM.
Note that due to components that may be experiencing a 'communication failure' or
'initialization failure' condition, this object may continue to show notReady.
Therefore, any application that polls this object should also incorporate a timeout
A more granular, per-blade status is available via the bladeSystemStatusTable"
::= { componentInformation 3 }
nodeFirmwareAnalysisTable OBJECT-TYPE
SYNTAX SEQUENCE OF NodeFirmwareAnalysisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of firmware levels of installed nodes. This information is grouped by
Machine Type/Model and includes two or more nodes with the same Type/Model.
This information is intended to be used in determining which components
firmware may need upgrade."
::= { componentFirmware 7 }
nodeFirmwareAnalysisEntry OBJECT-TYPE
SYNTAX NodeFirmwareAnalysisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Node firmware analysis information."
INDEX { nodeFirmwareAnalysisIndex }
::= { nodeFirmwareAnalysisTable 1 }
NodeFirmwareAnalysisEntry ::= SEQUENCE {
nodeFirmwareAnalysisIndex INTEGER,
nodeFirmwareAnalysisMachineTypeModel OCTET STRING,
nodeFirmwareAnalysisFirmwareType OCTET STRING,
nodeFirmwareAnalysisBuildId OCTET STRING,
nodeFirmwareAnalysisReleaseDate OCTET STRING,
nodeFirmwareAnalysisRevisionLevel OCTET STRING,
nodeFirmwareAnalysisTopology OCTET STRING,
nodeFirmwareAnalysisDeviceName OCTET STRING
}
nodeFirmwareAnalysisIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for the node firmware levels."
::={ nodeFirmwareAnalysisEntry 1 }
nodeFirmwareAnalysisMachineTypeModel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The machine type or model of node firmware."
::={ nodeFirmwareAnalysisEntry 2 }
nodeFirmwareAnalysisFirmwareType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware type."
::={ nodeFirmwareAnalysisEntry 3 }
nodeFirmwareAnalysisBuildId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware build id."
::={ nodeFirmwareAnalysisEntry 4 }
nodeFirmwareAnalysisReleaseDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware release date."
::={ nodeFirmwareAnalysisEntry 5 }
nodeFirmwareAnalysisRevisionLevel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware revision level."
::={ nodeFirmwareAnalysisEntry 6 }
nodeFirmwareAnalysisTopology OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The node topology."
::={ nodeFirmwareAnalysisEntry 7 }
nodeFirmwareAnalysisDeviceName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The node device name."
::={ nodeFirmwareAnalysisEntry 8 }
smFirmwareAnalysisTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmFirmwareAnalysisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of firmware levels of installed IOMs. This information is grouped by Product Id
and includes two or more IOMs with the same product id.
This information is intended to be used in determining which components firmware
may need upgrade."
::= { componentFirmware 11 }
smFirmwareAnalysisEntry OBJECT-TYPE
SYNTAX SmFirmwareAnalysisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IOM firmware analysis information."
INDEX { smFirmwareAnalysisIndex }
::= { smFirmwareAnalysisTable 1 }
SmFirmwareAnalysisEntry ::= SEQUENCE {
smFirmwareAnalysisIndex INTEGER,
smFirmwareAnalysisProductId OCTET STRING,
smFirmwareAnalysisProductName OCTET STRING,
smFirmwareAnalysisFirmwareType OCTET STRING,
smFirmwareAnalysisFirmwareVersion OCTET STRING,
smFirmwareAnalysisReleaseDate OCTET STRING,
smFirmwareAnalysisTopology OCTET STRING
}
smFirmwareAnalysisIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for the IOM firmware levels."
::={ smFirmwareAnalysisEntry 1 }
smFirmwareAnalysisProductId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IOM product id."
::={ smFirmwareAnalysisEntry 2 }
smFirmwareAnalysisProductName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IOM product name."
::={ smFirmwareAnalysisEntry 3 }
smFirmwareAnalysisFirmwareType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IOM firmware type."
::={ smFirmwareAnalysisEntry 4 }
smFirmwareAnalysisFirmwareVersion OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IOM firmware version."
::={ smFirmwareAnalysisEntry 5 }
smFirmwareAnalysisReleaseDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IOM release date."
::={ smFirmwareAnalysisEntry 6 }
smFirmwareAnalysisTopology OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IOM topology."
::={ smFirmwareAnalysisEntry 7 }
componentDriveTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentDriveEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of information indicating presence of a disk drive on a component.
The management module does not receive any inventory VPD from the
component, so only the presence of a drive can be indicated by this table."
::= { componentInformation 10 }
componentDriveEntry OBJECT-TYPE
SYNTAX ComponentDriveEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component drive information."
INDEX { componentDriveTopologyPath }
::= { componentDriveTable 1 }
ComponentDriveEntry ::= SEQUENCE {
componentDriveTopologyPath OCTET STRING,
componentDriveDescription OCTET STRING
}
componentDriveTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a row in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
MEDIA_MODULE, 0x19 Container of one or more media devices
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card"
::= { componentDriveEntry 1 }
componentDriveDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A short text string describing the particular drive on the component."
::= { componentDriveEntry 2 }
-- *************************************************************************
-- componentDriveTableCacheTimeout
-- *************************************************************************
componentDriveTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentDriveTable.
This value is static (constant) and cannot be set."
::= { componentInformation 11 }
-- *************************************************************************
-- License Key Information
--
-- This anchor is for tables that provide information about the
-- License Keys for components in the chassis.
--
-- *************************************************************************
licenseKeyInfo OBJECT IDENTIFIER ::= { monitors 30 }
licenseKeyInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF LicenseKeyInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of license key information."
::= { licenseKeyInfo 1 }
licenseKeyInfoEntry OBJECT-TYPE
SYNTAX LicenseKeyInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"License key information entry."
INDEX { licenseKeyComponentIndex, licenseKeyIndex }
::= { licenseKeyInfoTable 1 }
LicenseKeyInfoEntry ::= SEQUENCE {
licenseKeyComponentIndex INTEGER,
licenseKeyIndex INTEGER,
licenseKeyDescription OCTET STRING,
licenseKeyTimestamp OCTET STRING,
licenseKeyLicenseID OCTET STRING,
licenseKeyOtherInfo OCTET STRING,
licenseKeyStatus INTEGER
}
licenseKeyComponentIndex OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14),
switchModule1(41),
switchModule2(42),
switchModule3(43),
switchModule4(44)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"License key component table index."
::= { licenseKeyInfoEntry 1 }
licenseKeyIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The license key index for the chassis component."
::= { licenseKeyInfoEntry 2 }
licenseKeyDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The description for a license key."
::= { licenseKeyInfoEntry 3 }
licenseKeyTimestamp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date and time of this license key."
::= { licenseKeyInfoEntry 4 }
licenseKeyLicenseID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for this license key."
::= { licenseKeyInfoEntry 5 }
licenseKeyOtherInfo OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Any other information related to this license key."
::= { licenseKeyInfoEntry 6 }
licenseKeyStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
valid(1),
invalid(2),
expired(3),
usageExceeded(4),
notApplicable(99)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current status of this license key."
::= { licenseKeyInfoEntry 7 }
chassisLicenseKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChassisLicenseKeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of chassis license key information."
::= { licenseKeyInfo 5 }
chassisLicenseKeyEntry OBJECT-TYPE
SYNTAX ChassisLicenseKeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis License key information entry."
INDEX { chassisLicenseKeyIndex }
::= { chassisLicenseKeyTable 1 }
ChassisLicenseKeyEntry ::= SEQUENCE {
chassisLicenseKeyIndex INTEGER,
chassisLicenseKeyFeature OCTET STRING,
chassisLicenseKeyFeatureType OCTET STRING,
chassisLicenseKeyDescription OCTET STRING,
chassisLicenseKeySystem OCTET STRING,
chassisLicenseKeyLicenseID OCTET STRING,
chassisLicenseKeyValidation OCTET STRING,
chassisLicenseKeyStatus INTEGER,
chassisLicenseKeyTimeLimit OCTET STRING,
chassisLicenseKeyUsageLimit INTEGER
}
chassisLicenseKeyIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The key index for the chassis license keys."
::= { chassisLicenseKeyEntry 1 }
chassisLicenseKeyFeature OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the Feature for the license key."
::= { chassisLicenseKeyEntry 2 }
chassisLicenseKeyFeatureType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Feature Type Code for the license key."
::= { chassisLicenseKeyEntry 3 }
chassisLicenseKeyDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The description of the license key."
::= { chassisLicenseKeyEntry 4 }
chassisLicenseKeySystem OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System information for the license key."
::= { chassisLicenseKeyEntry 5 }
chassisLicenseKeyLicenseID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of the license key."
::= { chassisLicenseKeyEntry 6 }
chassisLicenseKeyValidation OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Validation of the license key."
::= { chassisLicenseKeyEntry 7 }
chassisLicenseKeyStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(0),
validatingKey(1),
invalidMTSN(2),
invalidMAC(3),
signatureValidationFailed(4),
keyExpired(5),
usageExceeded(6),
validateElsewhere(7),
notApplicable(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current status of the license key."
::= { chassisLicenseKeyEntry 8 }
chassisLicenseKeyTimeLimit OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date and Time (GMT) when license expires."
::= { chassisLicenseKeyEntry 9 }
chassisLicenseKeyUsageLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times remaining for license usage. A negative value indicates
that there is no Usage Limit for the license."
::= { chassisLicenseKeyEntry 10 }
-- ********************************************************************************
-- MM Security Settings
-- ********************************************************************************
securitySettings OBJECT IDENTIFIER ::= { configureSP 3 }
trespassWarning OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled, a customizable trespass warning message is displayed via the Web
and CLI interfaces."
::= { securitySettings 2 }
trespassWarningDefault OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset the trespass warning to default value.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { securitySettings 3 }
trespassMessage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1600))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the trespass warning message."
::= { securitySettings 4 }
-- ********************************************************************************
-- Chassis Security Settings
-- ********************************************************************************
chassisSecuritySettings OBJECT IDENTIFIER ::= { securitySettings 5 }
securityPolicySetting OBJECT-TYPE
SYNTAX INTEGER {
legacy(0),
secure(1),
unknown(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Determines chassis security policy. legacy mode(0) or secure mode(1).
unknown(255) returned when policy can't be set or determined."
::= { chassisSecuritySettings 1 }
securityPolicyState OBJECT-TYPE
SYNTAX INTEGER {
active(0),
pending(1),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines chassis security policy state. If pending(0),
check securityPolicyStatusTable for details on actions needed,
to make fully active."
::= { chassisSecuritySettings 2 }
securityPolicyStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SecurityPolicyStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of pending security policy status."
::= { chassisSecuritySettings 3 }
securityPolicyStatusEntry OBJECT-TYPE
SYNTAX SecurityPolicyStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Pending security policy status entry"
INDEX { securityPolicyStatusIndex }
::= { securityPolicyStatusTable 1 }
SecurityPolicyStatusEntry ::= SEQUENCE {
securityPolicyStatusIndex INTEGER,
securityPolicyStatusComponentType INTEGER,
securityPolicyStatusBayId INTEGER,
securityPolicyStatusSummary OCTET STRING,
securityPolicyStatusDetails OCTET STRING
}
securityPolicyStatusIndex OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pending Security policy status index."
::= { securityPolicyStatusEntry 1 }
securityPolicyStatusComponentType OBJECT-TYPE
SYNTAX INTEGER {
system(0),
mgmtModule1(1),
mgmtModule2(2),
blade1(11),
blade2(12),
blade3(13),
blade4(14),
blade5(15),
blade6(16),
blade7(17),
blade8(18),
blade9(19),
blade10(20),
blade11(21),
blade12(22),
blade13(23),
blade14(24),
switchModule1(31),
switchModule2(32),
switchModule3(33),
switchModule4(34)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates Component type and location with pending security status."
::= { securityPolicyStatusEntry 2 }
securityPolicyStatusBayId OBJECT-TYPE
SYNTAX INTEGER (0..14)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bay location of specific component.
NOTE: securityPolicyStatusComponentType enumeration also indicates location."
::= { securityPolicyStatusEntry 3 }
securityPolicyStatusSummary OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Summary of pending security status for the component."
::= { securityPolicyStatusEntry 4 }
securityPolicyStatusDetails OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Details of pending security status for the component."
::= { securityPolicyStatusEntry 5 }
cryptography OBJECT IDENTIFIER ::= { chassisSecuritySettings 10 }
cryptographySummary OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current level and summary description of the cryptographic configuration."
::= { cryptography 5 }
cryptographyMode OBJECT-TYPE
SYNTAX INTEGER {
nistCompatibility(0),
nist800131a(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NIST cryptographic mode setting. A successful setting of this object
initiates a reboot of the CMM within a few seconds."
::= { cryptography 15 }
cryptographyModeDetailsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptographyModeDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of information indicating any NIST customization details
and any reasons that the CMM cannot transition to the desired
NIST mode."
::= { cryptography 18 }
cryptographyModeDetailsEntry OBJECT-TYPE
SYNTAX CryptographyModeDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Cryptography mode status entry"
INDEX { cryptographyModeDetailsIndex }
::= { cryptographyModeDetailsTable 1 }
CryptographyModeDetailsEntry ::= SEQUENCE {
cryptographyModeDetailsIndex INTEGER,
cryptographyModeDetailsType INTEGER,
cryptographyModeDetailsDescription OCTET STRING
}
cryptographyModeDetailsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cryptography mode details index."
::= { cryptographyModeDetailsEntry 1 }
cryptographyModeDetailsType OBJECT-TYPE
SYNTAX INTEGER {
customization(0),
transition(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication of what type of message is reported for this entry."
::= { cryptographyModeDetailsEntry 2 }
cryptographyModeDetailsDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Message containing details for this cryptography entry."
::= { cryptographyModeDetailsEntry 3 }
cryptographyModeComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptographyModeComponentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of information listing any IOMs or nodes that require a
firmware update in order for the CMM to transition to the new mode."
::= { cryptography 20 }
cryptographyModeComponentEntry OBJECT-TYPE
SYNTAX CryptographyModeComponentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Cryptography mode component entry"
INDEX { cryptographyModeComponentIndex }
::= { cryptographyModeComponentTable 1 }
CryptographyModeComponentEntry ::= SEQUENCE {
cryptographyModeComponentIndex INTEGER,
cryptographyModeComponentId OCTET STRING
}
cryptographyModeComponentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cryptography mode component index."
::= { cryptographyModeComponentEntry 1 }
cryptographyModeComponentId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A component identifier for an IOM or node in the form:
ts:mm. t(type), s(slot number), mm sub-slot number."
::= { cryptographyModeComponentEntry 2 }
cryptographicCipher OBJECT-TYPE
SYNTAX INTEGER {
legacy(0),
tls12serveronly(1),
tls12serverclient(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The cryptographic cipher suite setting."
::= { cryptography 25 }
cryptographyCipherComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptographyCipherComponentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of information listing any IOMs or nodes that are out of
compliance with regards to the cipher suite setting and are therefore
preventing the CMM from transitioning to the new cipher mode."
::= { cryptography 30 }
cryptographyCipherComponentEntry OBJECT-TYPE
SYNTAX CryptographyCipherComponentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Cryptography cipher component entry"
INDEX { cryptographyCipherComponentIndex }
::= { cryptographyCipherComponentTable 1 }
CryptographyCipherComponentEntry ::= SEQUENCE {
cryptographyCipherComponentIndex INTEGER,
cryptographyCipherComponentId OCTET STRING
}
cryptographyCipherComponentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cryptography cipher component index."
::= { cryptographyCipherComponentEntry 1 }
cryptographyCipherComponentId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A component identifier for an IOM or node in the form:
ts:mm. t(type), s(slot number), mm sub-slot number."
::= { cryptographyCipherComponentEntry 2 }
cipherStrength OBJECT-TYPE
SYNTAX INTEGER {
none(0),
rsa2048SHA1(1),
rsa2048SHA256(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Strength level of the NIST signing algorithm for certificate authority.
None(0) indicates no signing algorithm has been set. When writing a new
value to this object, a result of No Error is returned if the value is
valid. However, the new algorithm will be used to create an authority
certificate asynchronously. This process may take up to 1 minute to complete.
So results for subsequent queries to the object's value may also be delayed
while the new certificate is being generated."
::= { chassisSecuritySettings 15 }
-- ********************************************************************************
-- MM Clock
-- ********************************************************************************
spClock OBJECT IDENTIFIER ::= { configureSP 4 }
spClockDateAndTimeSetting OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MM clock date and time setting.
A date-time specification for the local time of day.
For example to set the date and time to
March 4, 2001 at 06:00:00AM, set the value to:'03/04/2001,06:00:00'.
field contents range
_____ ________ _____
1 month 01..12
2 separator '/'
3 day 01..31
4 separator '/'
5 year 2000..2089
6 separator ','
7 hour 00..23
8 separator ':'
9 minutes 00..59
10 separator ':'
11 seconds 00..59
"
::= { spClock 1 }
spClockTimezoneSetting OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MM clock Greenwich Mean Time(GMT) offset and Daylight Saving Time(DST)
settings.
For write, the value must be a time zone listed in spClockTimezoneTable.
The spClockTimezoneTable lists all valid time zones.
Example:
To set America's New York time zone, set the value to: 'America/New_York'
For read, the value format is <offset>,<DST flag>,<time zone> (<comment>)
Example: -4:00,yes,America/New_York (Eastern Time)
"
::= { spClock 2 }
spClockTimezoneTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpClockTimezoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of all time zones listed in zone.tab file"
::= { spClock 3 }
spClockTimezoneEntry OBJECT-TYPE
SYNTAX SpClockTimezoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Time zone entry"
INDEX { spClockTimezoneIndex }
::= { spClockTimezoneTable 1 }
SpClockTimezoneEntry ::= SEQUENCE {
spClockTimezoneIndex INTEGER,
spClockTimezoneId OCTET STRING,
spClockTimezoneCaption OCTET STRING,
spClockTimezoneDescription OCTET STRING,
spClockTimezoneName OCTET STRING,
spClockTimezoneStandardName OCTET STRING,
spClockTimezoneStandardCaption OCTET STRING,
spClockTimezoneDaylightName OCTET STRING,
spClockTimezoneDaylightCaption OCTET STRING,
spClockTimezoneCmmOffset INTEGER,
spClockTimezoneStandardOffsetMinutes INTEGER,
spClockTimezoneStandardDaylightOffsetMinutes INTEGER,
spClockTimezoneDaylightDay INTEGER,
spClockTimezoneDaylightDayOfWeek INTEGER,
spClockTimezoneDaylightMonth INTEGER,
spClockTimezoneDaylightStandardDay INTEGER,
spClockTimezoneDaylightStandardDayOfWeek INTEGER,
spClockTimezoneDaylightStandardMonth INTEGER,
spClockTimezoneDaylightIntervalInMinutes INTEGER,
spClockTimezoneDaylightStandardInMinutes INTEGER
}
spClockTimezoneIndex OBJECT-TYPE
SYNTAX INTEGER (0..1000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone table index."
::= { spClockTimezoneEntry 1 }
spClockTimezoneId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone instance id."
::= { spClockTimezoneEntry 2 }
spClockTimezoneCaption OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone caption."
::= { spClockTimezoneEntry 3 }
spClockTimezoneDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone description."
::= { spClockTimezoneEntry 4 }
spClockTimezoneName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone name."
::= { spClockTimezoneEntry 5 }
spClockTimezoneStandardName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone standard name."
::= { spClockTimezoneEntry 6 }
spClockTimezoneStandardCaption OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone standard caption."
::= { spClockTimezoneEntry 7 }
spClockTimezoneDaylightName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone daylight name."
::= { spClockTimezoneEntry 8 }
spClockTimezoneDaylightCaption OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time zone daylight caption."
::= { spClockTimezoneEntry 9 }
spClockTimezoneCmmOffset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CMM offset."
::= { spClockTimezoneEntry 10 }
spClockTimezoneStandardOffsetMinutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standard GMT offset in minutes."
::= { spClockTimezoneEntry 11 }
spClockTimezoneStandardDaylightOffsetMinutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Standard GMT offset in minutes."
::= { spClockTimezoneEntry 12 }
spClockTimezoneDaylightDay OBJECT-TYPE
SYNTAX INTEGER{
undefined(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"There are two different interpretations for this field, depending on the value of DaylightDayOfWeek.
In one case, DaylightDay defines the day-in-month on which daylight saving time starts.
This interpretation is used when the DaylightDayOfWeek is 0.
A positive or negative integer is specified to indicate whether the DaylightDay is calculated
from the beginning or the end of the month.
For example, 5 indicates the fifth day in the DaylightMonth and -1 indicates the last day in the DaylightMonth.
When DaylightDayOfWeek is not 0, DaylightDay is the day in the month on which daylight saving time starts,
as defined in conjunction with DaylightDayOfWeek.
For example, if DaylightDay is 15 and DaylightDayOfWeek is Saturday, then daylight saving time starts
on the first Saturday on or after the 15th day in the DaylightMonth (that is, the third Saturday in the month).
If DaylightDay is 20 and DaylightDayOfWeek is -Saturday, then this indicates the first Saturday on or before
the 20th day in the DaylightMonth.
If DaylightDay is -1 and DaylightDayOfWeek is -Sunday, then this indicates the last Sunday in the month."
::= { spClockTimezoneEntry 13 }
spClockTimezoneDaylightDayOfWeek OBJECT-TYPE
SYNTAX INTEGER{
exactDayOfMonth(0),
minusSunday(-1),
minusMonday(-2),
minusTuesday(-3),
minusWednesday(-4),
minusThursday(-5),
minusFriday(-6),
minusSaturday(-7),
sunday(1),
monday(2),
tuesday(3),
wednesday(4),
thursday(5),
friday(6),
saturday(7),
undefined(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Day of week daylight saving begins."
::= { spClockTimezoneEntry 14 }
spClockTimezoneDaylightMonth OBJECT-TYPE
SYNTAX INTEGER{
january(0),
february(1),
march(2),
april(3),
may(4),
june(5),
july(6),
august(7),
september(8),
october(9),
november(10),
december(11),
undefined(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Month daylight saving begins."
::= { spClockTimezoneEntry 15 }
spClockTimezoneDaylightStandardDay OBJECT-TYPE
SYNTAX INTEGER{
undefined(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"There are two different interpretations for this property, depending on the value of StandardDayOfWeek.
In one case, StandardDay defines the day-in-month on which daylight saving time ends. This interpretation
is used when the StandardDayOfWeek is 0.
A positive or negative integer is specified to indicate whether the StandardDay is calculated from the beginning or the end of the month.
For example, 5 indicates the fifth day in the StandardMonth and -1 indicates the last day in the StandardMonth.
When StandardDayOfWeek is not 0, StandardDay is the day-in-month on which daylight saving time ends, as defined in
conjunction with StandardDayOfWeek.
For example, if StandardDay is 15 and StandardDayOfWeek is Saturday,
then daylight saving time ends on the first Saturday on or after the 15th day in the StandardMonth (that is,
the third Saturday in the month).
If StandardDay is 20 and StandardDayOfWeek is -Saturday, then this indicates the first Saturday on or before the 20
th day in the StandardMonth.
If StandardDay is -1 and StandardDayOfWeek is -Sunday, then this indicates the last Sunday in the StandardMonth."
::= { spClockTimezoneEntry 16 }
spClockTimezoneDaylightStandardDayOfWeek OBJECT-TYPE
SYNTAX INTEGER{
exactDayOfMonth(0),
minusSunday(-1),
minusMonday(-2),
minusTuesday(-3),
minusWednesday(-4),
minusThursday(-5),
minusFriday(-6),
minusSaturday(-7),
sunday(1),
monday(2),
tuesday(3),
wednesday(4),
thursday(5),
friday(6),
saturday(7),
undefined(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Day of week daylight saving ends."
::= { spClockTimezoneEntry 17 }
spClockTimezoneDaylightStandardMonth OBJECT-TYPE
SYNTAX INTEGER{
january(0),
february(1),
march(2),
april(3),
may(4),
june(5),
july(6),
august(7),
september(8),
october(9),
november(10),
december(11),
undefined(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Month daylight saving ends."
::= { spClockTimezoneEntry 18 }
spClockTimezoneDaylightIntervalInMinutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interval in minutes (Daylight saving begins)."
::= { spClockTimezoneEntry 19 }
spClockTimezoneDaylightStandardInMinutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interval in minutes (Daylight saving ends)."
::= { spClockTimezoneEntry 20 }
spClockTimezoneDaylightStart OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DST start."
::= { spClock 5 }
spClockTimezoneDaylightEnd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DST end."
::= { spClock 6 }
-- ********************************************************************************
-- MM identification
-- ********************************************************************************
spIdentification OBJECT IDENTIFIER ::= { configureSP 5 }
spTxtId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Text description of the MM.
NOTE: Do not put any 'space characters' at end of the string."
::= { spIdentification 1 }
-- ********************************************************************************
-- Network Configuration
-- ********************************************************************************
networkConfiguration OBJECT IDENTIFIER ::= { configureSP 9 }
-- ********************************************************************************
-- Network Interfaces
-- ********************************************************************************
networkInterfaces OBJECT IDENTIFIER ::= { networkConfiguration 1 }
-- ********************************************************************************
-- Ethernet Interface
-- ********************************************************************************
extEthernetInterface OBJECT IDENTIFIER ::= { networkInterfaces 1 }
extEthernetInterfaceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of interface."
::= { extEthernetInterface 1 }
extEthernetInterfaceHostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the 64 byte null terminated DNS host name for this
interface."
::= { extEthernetInterface 3 }
extEthernetInterfaceIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the IP address for the ethernet interface."
::= { extEthernetInterface 4 }
extEthernetInterfaceDataRate OBJECT-TYPE
SYNTAX INTEGER {
enet10Megabit(3),
enet100Megabit(4),
autoSpeed(5),
enet1Gigabit(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the data transfer rate to be used over the ethernet
interface: 10Mb, 100Mb, 1G or Auto."
::= { extEthernetInterface 5 }
extEthernetInterfaceDuplexSetting OBJECT-TYPE
SYNTAX INTEGER {
fullDuplex(1),
halfDuplex(2),
autoDuplex(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the duplex settings for the data transfer rate to be used over
the ethernet interface: Half, Full, or Auto."
::= { extEthernetInterface 6 }
extEthernetInterfaceLAA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the locally administered MAC address. The locally administered
address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This
value must be in the form XX:XX:XX:XX:XX:XX where 'X' is a number between 0 - 9 and
A - F. This MM subsystem does not allow use of a multicast address. A multicast
address has the least significant bit of the first byte set to a 1. The first
byte must, therefore, be an even number.
NOTE: Although the locally administered MAC address can be assigned the same value
for the primary and backup MM, it is not recommended."
::= { extEthernetInterface 7 }
extEthernetInterfaceDhcpEnabled OBJECT-TYPE
SYNTAX INTEGER {
dhcpDisabled(0),
dhcpEnabled(1),
tryDhcpThenTryStatic(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable DHCP on this interface."
::= { extEthernetInterface 8 }
extEthernetInterfaceGatewayIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the IP address of the gateway/router for the ethernet
interface."
::= { extEthernetInterface 9 }
extEthernetInterfaceBIA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the burned-in MAC (BIA) address."
::= { extEthernetInterface 10 }
extEthernetInterfaceMTU OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the Maximum Transmission Unit(MTU) for the ethernet
interface"
::= { extEthernetInterface 13 }
extEthernetInterfaceSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the subnet mask for the ethernet interface"
::= { extEthernetInterface 14 }
extEthernetInterfaceFloatingIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the floating IP address for the external ethernet interface."
::= { extEthernetInterface 22 }
-- ********************************************************************************
-- DHCP Server Assigned Settings for ethernet interface
-- ********************************************************************************
dhcpEthernetInterface OBJECT IDENTIFIER ::= { extEthernetInterface 16 }
dhcpHostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the 64 byte null terminated DNS host name for this
interface, assigned by the DHCP server."
::= { dhcpEthernetInterface 1 }
dhcpIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the IP address for the ethernet interface,
assigned by the DHCP server."
::= { dhcpEthernetInterface 2 }
dhcpGatewayIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the IP address of the gateway/router for the ethernet
interface, assigned by the DHCP server."
::= { dhcpEthernetInterface 3 }
dhcpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the Subnet Mask for the ethernet
interface, assigned by the DHCP server."
::= { dhcpEthernetInterface 4 }
dhcpDomainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the 64 byte null terminated Domain Name for this
interface, assigned by the DHCP server."
::= { dhcpEthernetInterface 5 }
dhcpDHCPServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the DHCP server IP address used to acquire the
DHCP settings."
::= { dhcpEthernetInterface 6 }
dhcpPrimaryDNSServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the Primary DNS server, assigned by the DHCP server."
::= { dhcpEthernetInterface 7 }
dhcpSecondaryDNSServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the Secondary DNS server, assigned by the DHCP server."
::= { dhcpEthernetInterface 8 }
dhcpTertiaryDNSServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the tertiary DNS server, assigned by the DHCP server."
::= { dhcpEthernetInterface 9 }
-- ********************************************************************************
-- Standby Ethernet Interface
-- ********************************************************************************
standbyExtEthernetInterface OBJECT IDENTIFIER ::= { networkInterfaces 3 }
standbyExtEthernetInterfaceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of interface.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 1 }
standbyExtEthernetInterfaceHostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the 64 byte null terminated DNS host name for this
interface.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 3 }
standbyExtEthernetInterfaceIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the IP address for the ethernet interface.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 4 }
standbyExtEthernetInterfaceDataRate OBJECT-TYPE
SYNTAX INTEGER {
enet10Megabit(3),
enet100Megabit(4),
autoSpeed(5),
enet1Gigabit(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the data transfer rate to be used over the ethernet
interface: 10Mb, 100Mb, 1G or Auto.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 5 }
standbyExtEthernetInterfaceDuplexSetting OBJECT-TYPE
SYNTAX INTEGER {
fullDuplex(1),
halfDuplex(2),
autoDuplex(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the duplex settings for the data transfer rate to be used over
the ethernet interface: Half, Full, or Auto.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 6 }
standbyExtEthernetInterfaceLAA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the locally administered MAC address. The locally administered
address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF.
This value must be in the form XX:XX:XX:XX:XX:XX where 'X' is a number between 0 - 9 and A - F.
This MM subsystem does not allow use of a multicast address.
A multicast address has the least significant bit of the first byte set to a 1. The first
byte must, therefore, be an even number.
NOTE: This MIB object is only applicable to systems with a standby MM.
NOTE: Although the locally administered MAC address can be assigned the same value
for the primary and backup MM, it is not recommended."
::= { standbyExtEthernetInterface 7 }
standbyExtEthernetInterfaceDhcpEnabled OBJECT-TYPE
SYNTAX INTEGER {
dhcpDisabled(0),
dhcpEnabled(1),
tryDhcpThenTryStatic(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable DHCP on this interface.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 8 }
standbyExtEthernetInterfaceGatewayIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the IP address of the gateway/router for the ethernet
interface.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 9 }
standbyExtEthernetInterfaceBIA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the burned-in MAC (BIA) address.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 10 }
standbyExtEthernetInterfaceMTU OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the Maximum Transmission Unit (MTU) for the ethernet
interface.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 13 }
standbyExtEthernetInterfaceSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the subnet mask for the ethernet interface.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 14 }
advancedFailover OBJECT-TYPE
SYNTAX INTEGER{
off(0),
ipnoswap(1),
ipswap(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User can enable advanced failover.
off : no standby network interface
ipswap: Standby network interface, swap IPs during failover
ipnoswap: Standby network interface, do not swap IPs during failover.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 15 }
-- ********************************************************************************
-- DHCP Server Assigned Settings for standby ethernet interface
-- ********************************************************************************
standbyDhcpEthernetInterface OBJECT IDENTIFIER ::= { standbyExtEthernetInterface 16 }
standbyDhcpHostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the 64 byte null terminated DNS host name for this
interface, assigned by the DHCP server.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 1 }
standbyDhcpIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the IP address for the ethernet interface,
assigned by the DHCP server.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 2 }
standbyDhcpGatewayIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the IP address of the gateway/router for the ethernet
interface, assigned by the DHCP server.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 3 }
standbyDhcpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the Subnet Mask for the ethernet
interface, assigned by the DHCP server.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 4 }
standbyDhcpDomainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the 64 byte null terminated Domain Name for this
interface, assigned by the DHCP server.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 5 }
standbyDhcpDHCPServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the DHCP server IP address used to acquire the
DHCP settings.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 6 }
standbyDhcpPrimaryDNSServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the Primary DNS server, assigned by the DHCP server.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 7 }
standbyDhcpSecondaryDNSServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the Secondary DNS server, assigned by the DHCP server.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 8 }
standbyDhcpTertiaryDNSServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the tertiary DNS server, assigned by the DHCP server.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyDhcpEthernetInterface 9 }
-- ********************************************************************************
-- Ethernet Interface IPv6
-- ********************************************************************************
extEthernetInterfaceIPv6 OBJECT IDENTIFIER ::= { networkInterfaces 4 }
extEthernetInterfaceIPv6Type OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of interface."
::= { extEthernetInterfaceIPv6 1 }
extEthernetInterfaceIPv6Enabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current IPv6 enabled or disabled state of this MM.
NOTE: If IPv6 address(es) have been configured for one or more
interfaces/protocols/services on this MM, when you update
the firmware to a level which does not support IPv6, all IPv6
connectivity will be lost, and services/interfaces for which an IPv6
address was configured may not function properly. You will be required
to reconfigure these services/interfaces."
::= { extEthernetInterfaceIPv6 2 }
extEthernetInterfaceIPv6Config OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6 5 }
extEthernetInterfaceIPv6LocalAddress OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6Config 1 }
extEthernetInterfaceIPv6LinkLocalAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 link local IP address for the ethernet interface.
NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
object has the value '0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceIPv6LocalAddress 1 }
extEthernetInterfaceIPv6StaticIPConfig OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6Config 2 }
extEthernetInterfaceIPv6StaticIPConfigEnabled OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 static IP address enabled or disabled state for the ethernet interface."
::= { extEthernetInterfaceIPv6StaticIPConfig 1 }
extEthernetInterfaceIPv6StaticIPAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 static IP address for the ethernet interface.
NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
object has the value '0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceIPv6StaticIPConfig 2 }
extEthernetInterfaceIPv6StaticIPAddressPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 static IP address prefix length for the ethernet interface.
NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
object has the value 0."
::= { extEthernetInterfaceIPv6StaticIPConfig 3 }
extEthernetInterfaceIPv6StaticIPDefaultRoute OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 static IP address default route for the ethernet interface.
NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
object has the value '0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceIPv6StaticIPConfig 4 }
extEthernetInterfaceIPv6LinkFloatingAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 floating IP address for the external ethernet interface.
NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
object has the value '0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceIPv6StaticIPConfig 5 }
extEthernetInterfaceIPv6AutoIPConfig OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6Config 3 }
extEthernetInterfaceIPv6AutoIPConfigEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 automatic IP configuration enabled or disabled state for the ethernet interface.
NOTE: extEthernetInterfaceIPv6AutoIPConfigEnabled is the logical OR of extEthernetInterfaceDHCPv6Enabled
and extEthernetInterfaceIPv6StatelessAutoConfigEnabled settings.
NOTE: Enabling/Disabling extEthernetInterfaceIPv6AutoIPConfigEnabled will cause both
extEthernetInterfaceDHCPv6Enabled and extEthernetInterfaceIPv6StatelessAutoConfigEnabled to be enabled/disabled.
NOTE: extEthernetInterfaceIPv6StaticIPConfigEnabled and extEthernetInterfaceIPv6AutoIPConfigEnabled
cannot be disabled at the same time."
::= { extEthernetInterfaceIPv6AutoIPConfig 1 }
extEthernetInterfaceDHCPv6Config OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6AutoIPConfig 2 }
extEthernetInterfaceDHCPv6Enabled OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The DHCPv6 enabled or disabled state for the ethernet interface.
NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled is currently disabled, Disabling
extEthernetInterfaceDHCPv6Enabled will cause extEthernetInterfaceIPv6AutoIPConfigEnabled to be disabled.
NOTE: If extEthernetInterfaceIPv6StaticIPConfigEnabled and
extEthernetInterfaceIPv6StatelessAutoConfigEnabled are currently disabled, Disabling
extEthernetInterfaceDHCPv6Enabled will not be allowed."
::= { extEthernetInterfaceDHCPv6Config 1 }
extEthernetInterfaceDHCPv6IPAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 address for the ethernet interface, assigned by DHCPv6 server.
NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
is disabled or if DHCPv6 server is not available, this object has the value
'0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceDHCPv6Config 2 }
extEthernetInterfaceDHCPv6DomainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 64 byte Domain Name for the ethernet interface,
assigned by the DHCPv6 server.
NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
is disabled or if DHCPv6 server is not available, this object has the
value '(Not available)'."
::= { extEthernetInterfaceDHCPv6Config 4 }
extEthernetInterfaceDHCPv6PrimaryDNSServer OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The primary DNS server, assigned by the DHCPv6 server.
NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
is disabled or if DHCPv6 server is not available, this object has the
value '0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceDHCPv6Config 5 }
extEthernetInterfaceDHCPv6SecondaryDNSServer OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The secondary DNS server, assigned by the DHCPv6 server.
NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
is disabled or if DHCPv6 server is not available, this object has the
value '0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceDHCPv6Config 6 }
extEthernetInterfaceDHCPv6TertiaryDNSServer OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tertiary DNS server, assigned by the DHCPv6 server.
NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
is disabled or if DHCPv6 server is not available, this object has the
value '0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceDHCPv6Config 7 }
extEthernetInterfaceDHCPv6Server OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The DHCPv6 server IPv6 address used to acquire the DHCP settings.
NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
is disabled or if DHCPv6 server is not available, this object has the
value '0:0:0:0:0:0:0:0'."
::= { extEthernetInterfaceDHCPv6Config 8 }
extEthernetInterfaceIPv6StatelessAutoConfig OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6AutoIPConfig 3 }
extEthernetInterfaceIPv6StatelessAutoConfigEnabled OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 stateless auto-configuration enabled or disabled state for the ethernet interface.
NOTE: If extEthernetfInterfaceDHCPv6Enabled is currently disabled, Disabling
extEthernetInterfaceIPv6StatelessAutoConfigEnabled will cause extEthernetInterfaceIPv6AutoIPConfigEnabled
to be disabled."
::= { extEthernetInterfaceIPv6StatelessAutoConfig 1 }
extEthernetInterfaceStatelessAutoConfigAddressesTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExtEthernetInterfaceStatelessAutoConfigAddressesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of stateless Auto-Config addresses entries"
::= { extEthernetInterfaceIPv6StatelessAutoConfig 2 }
extEthernetInterfaceStatelessAutoConfigAddressesEntry OBJECT-TYPE
SYNTAX ExtEthernetInterfaceStatelessAutoConfigAddressesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Stateless Auto-Config address entries"
INDEX { extEthernetInterfaceStatelessAutoConfigAddressesIndex }
::= { extEthernetInterfaceStatelessAutoConfigAddressesTable 1 }
ExtEthernetInterfaceStatelessAutoConfigAddressesEntry ::= SEQUENCE {
extEthernetInterfaceStatelessAutoConfigAddressesIndex INTEGER,
extEthernetInterfaceStatelessAutoConfigAddresses InetAddressIPv6,
extEthernetInterfaceStatelessAutoConfigAddressesPrefixLen INTEGER
}
extEthernetInterfaceStatelessAutoConfigAddressesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for stateless Auto-Config addresses.
NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or
extEthernetInterfaceIPv6Enabled is currently disabled, this
object will show nothing."
::= { extEthernetInterfaceStatelessAutoConfigAddressesEntry 1 }
extEthernetInterfaceStatelessAutoConfigAddresses OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The stateless Auto-Configuration IPv6 address.
NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or
extEthernetInterfaceIPv6Enabled is currently disabled, this
object will show nothing."
::= { extEthernetInterfaceStatelessAutoConfigAddressesEntry 2 }
extEthernetInterfaceStatelessAutoConfigAddressesPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The stateless Auto-Configration address prefix length.
NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or
extEthernetInterfaceIPv6Enabled is currently disabled, this
object will show nothing."
::= { extEthernetInterfaceStatelessAutoConfigAddressesEntry 3 }
standbyExtEthernetInterfaceIPv6 OBJECT IDENTIFIER ::= { networkInterfaces 5 }
standbyEthernetInterfaceIPv6LocalAddress OBJECT IDENTIFIER ::= { standbyExtEthernetInterfaceIPv6 1 }
standbyEthernetInterfaceIPv6LinkLocalAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 link local IP address for the standby MM."
::= { standbyEthernetInterfaceIPv6LocalAddress 1 }
standbyEthernetInterfaceIPv6StaticIPConfig OBJECT IDENTIFIER ::= { standbyExtEthernetInterfaceIPv6 2 }
standbyEthernetInterfaceIPv6StaticIPConfigEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 static IP address state for the MM.
NOTE: This value may be altered through the
extEthernetInterfaceIPv6StaticIPConfigEnabled object."
::= { standbyEthernetInterfaceIPv6StaticIPConfig 1 }
standbyEthernetInterfaceIPv6StaticIPAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 static IP address for the standby MM
NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
object has the value '0:0:0:0:0:0:0:0'."
::= { standbyEthernetInterfaceIPv6StaticIPConfig 2 }
standbyEthernetInterfaceIPv6StaticIPAddressPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 static IP address prefix length for the standyby MM.
NOTE: This value may be altered through the
extEthernetInterfaceIPv6StaticIPAddressPrefixLen object."
::= { standbyEthernetInterfaceIPv6StaticIPConfig 3 }
standbyEthernetInterfaceIPv6StaticIPDefaultRoute OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 static IP address default route for the standby MM.
NOTE: This value may be altered through the
extEthernetInterfaceIPv6StaticIPDefaultRoute object."
::= { standbyEthernetInterfaceIPv6StaticIPConfig 4 }
standbyEthernetInterfaceDHCPv6Config OBJECT IDENTIFIER ::= { standbyExtEthernetInterfaceIPv6 3 }
standbyEthernetInterfaceDHCPv6Enabled OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The DHCPv6 enabled or disabled state for the standby MM.
NOTE: This field may be altered through the
extEthernetInterfaceDHCPv6Enabled object."
::= { standbyEthernetInterfaceDHCPv6Config 1 }
standbyEthernetInterfaceDHCPv6IPAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 address for the standby MM assigned by DHCPv6 server."
::= { standbyEthernetInterfaceDHCPv6Config 2 }
standbyEthernetInterfaceDHCPv6DomainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 64 byte Domain Name for the standby MM
assigned by the DHCPv6 server."
::= { standbyEthernetInterfaceDHCPv6Config 4 }
standbyEthernetInterfaceStatelessAutoConfigAddressesTable OBJECT-TYPE
SYNTAX SEQUENCE OF StandbyEthernetInterfaceStatelessAutoConfigAddressesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of stateless Auto-Config addresses entries.
NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or
extEthernetInterfaceIPv6Enabled is currently disabled, this
table will show nothing."
::= { standbyExtEthernetInterfaceIPv6 4 }
standbyEthernetInterfaceStatelessAutoConfigAddressesEntry OBJECT-TYPE
SYNTAX StandbyEthernetInterfaceStatelessAutoConfigAddressesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Stateless Auto-Config address entries"
INDEX { standbyEthernetInterfaceStatelessAutoConfigAddressesIndex }
::= { standbyEthernetInterfaceStatelessAutoConfigAddressesTable 1 }
StandbyEthernetInterfaceStatelessAutoConfigAddressesEntry ::= SEQUENCE {
standbyEthernetInterfaceStatelessAutoConfigAddressesIndex INTEGER,
standbyEthernetInterfaceStatelessAutoConfigAddresses InetAddressIPv6,
standbyEthernetInterfaceStatelessAutoConfigAddressesPrefixLen INTEGER
}
standbyEthernetInterfaceStatelessAutoConfigAddressesIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for stateless Auto-Config addresses."
::= { standbyEthernetInterfaceStatelessAutoConfigAddressesEntry 1 }
standbyEthernetInterfaceStatelessAutoConfigAddresses OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The stateless Auto-Configuration IPv6 address."
::= { standbyEthernetInterfaceStatelessAutoConfigAddressesEntry 2 }
standbyEthernetInterfaceStatelessAutoConfigAddressesPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The stateless Auto-Configration address prefix length."
::= { standbyEthernetInterfaceStatelessAutoConfigAddressesEntry 3 }
ddnsStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dynamic DNS provides the capability for a networked device
to notify a domain name server to change, in real time, the
active DNS configuration of its configured hostnames, addresses
or other information stored in DNS. With Dynamic DNS, host
computers gain the capability to notify their respective DNS
server of the IP address they have received from a DHCP server
or through self-configuration."
::= { networkInterfaces 10 }
hostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the DNS host name for this system. This object
provides the exact same function as extEthernetInterfaceHostName"
::= { networkInterfaces 11 }
standbyHostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the DNS host name for the standby. This object
provides the exact same function as standbyExtEthernetInterfaceHostName
and is only applicable to systems with a standby MM."
::= { networkInterfaces 12 }
domainName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user assigned DNS domain name."
::= { networkInterfaces 13 }
standbyDomainName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user assigned DNS domain name of the standby. This is only
applicable to systems with a standby MM."
::= { networkInterfaces 14 }
activateNetworkUpdates OBJECT-TYPE
SYNTAX INTEGER {
noPendingUpdates(0),
pendingUpdates(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When read, the return value indicates if there are any pending network
updates ready to be applied. Writing any value will apply any pending
network updates immediately."
::= { networkInterfaces 16 }
-- ********************************************************************************
-- VLAN Configuration
-- ********************************************************************************
vlanConfigure OBJECT IDENTIFIER ::= { networkInterfaces 20 }
vlanGlobalState OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object disables or enables the VLAN feature. The
configuration objects for the VLAN are in the
vlanCMMTable.
The default setting for this object is disable(0).
IMPORTANT NOTE: Any change to this object will revert
back to its previous value if the change is not
committed by setting the object vlanCommitState to
executeCommit(3) within the number of minutes indicated
in the object vlanCommitTimeout."
::= { vlanConfigure 1 }
vlanCommitTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is the number of minutes from the last
VLAN-related object change until any non-committed changes
will revert back to their previous settings.
This means if a user makes a change that disrupts TCP/IP
access to the CMM, the change will revert back to its
previous setting after the number of minutes in this
object. This allows the user to access the CMM again
if access is lost through an unintended VLAN setting.
Once the changes are committed using the object,
vlanCommitState, setting it to executeCommit(3), the
changes will be saved in non-volatile memory.
The amount of time before uncommitted changes revert back
to their previous settings starts from the last change made
to any VLAN-related object. If no other change is made,
the user has this number of minutes (the number in this
object) to commit the changes with vlanCommitState before
the changes will revert back.
The default setting for this object is 2 minutes.
IMPORTANT NOTE: Any change to this object will revert
back to its previous value if the change is not
committed by setting the object vlanCommitState to
executeCommit(3) within the number of minutes indicated
in the object vlanCommitTimeout."
::= { vlanConfigure 2 }
vlanCommitState OBJECT-TYPE
SYNTAX INTEGER { noChangesPending(1), commitNeeded(2), executeCommit(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object gives the status of whether there are
VLAN-related changes pending that need to be committed,
and allows a user to commit (save) any VLAN changes.
If changes are pending, reading this object will give
a value of commitNeeded(2). If no changes are pending,
this object will have the value of noChangesPending(1).
To save any VLAN-related changes so they do not revert
back to previous settings, set this object to
executeCommit(3) whenever this object has a value of
commitNeeded(2)."
::= { vlanConfigure 3 }
-- ********************************************************************************
-- VLAN CMM Table Configuration
-- ********************************************************************************
vlanCMMTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanCMMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the VLAN configuration objects.
The default entry has an vlanCMMIndex equal to 1.
The objects for this default entry are configurable.
An additional VLAN entry may be added by setting the
object, vlanCMMEntryStatus, at vlanCMMIndex=2 to the value
of createRequest(2) and also setting the object,
vlanCMMVlanId, at vlanCMMIndex=2 to a valid, unique
value.
IMPORTANT NOTE: Any changes to the object of this table
will revert back to their previous settings if the
changes are not committed by setting the object
vlanCommitState to executeCommit(3) within the number of
minutes indicated in the object vlanCommitTimeout."
::= { vlanConfigure 20 }
vlanCMMEntry OBJECT-TYPE
SYNTAX VlanCMMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"VLAN entries."
INDEX { vlanCMMIndex }
::= { vlanCMMTable 1 }
VlanCMMEntry ::= SEQUENCE {
vlanCMMIndex INTEGER,
vlanCMMVlanId INTEGER,
vlanCMMName OCTET STRING,
vlanCMMEntryStatus EntryStatus,
vlanCMMState INTEGER,
vlanCMMSOLAccess INTEGER,
vlanCMMTagging INTEGER,
vlanCMMIPv4Address IpAddress,
vlanCMMIPv4Gateway IpAddress,
vlanCMMIPv4Mask IpAddress,
vlanCMMIPv4SubnetRoute1 IpAddress,
vlanCMMIPv4SubnetRouteMask1 IpAddress,
vlanCMMIPv4SubnetRoute2 IpAddress,
vlanCMMIPv4SubnetRouteMask2 IpAddress,
vlanCMMIPv4SubnetRoute3 IpAddress,
vlanCMMIPv4SubnetRouteMask3 IpAddress,
vlanCMMIPv6Address InetAddressIPv6,
vlanCMMIPv6AddressPrefixLen INTEGER,
vlanCMMIPv6Gateway InetAddressIPv6,
vlanCMMIPv6SubnetRoute1 InetAddressIPv6,
vlanCMMIPv6SubnetRoutePrefixLen1 INTEGER,
vlanCMMIPv6SubnetRoute2 InetAddressIPv6,
vlanCMMIPv6SubnetRoutePrefixLen2 INTEGER,
vlanCMMIPv6SubnetRoute3 InetAddressIPv6,
vlanCMMIPv6SubnetRoutePrefixLen3 INTEGER
}
vlanCMMIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for VLAN entry. If vlanCMMIndex is equal to 1,
it is the Default VLAN entry and cannot be deleted."
::= { vlanCMMEntry 1 }
vlanCMMVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Valid VLAN ID. Allowed values are 5..4094. If the entry
is not valid, this object will have the value of 0.
If this entry has the vlanCMMIndex value of 1 (default
VLAN entry), then setting this object will take effect
immediately. For other entries, when this object is set,
this entry must have the object, vlanCMMState set to
enable(1) or restart(2) for this change to take effect."
::= { vlanCMMEntry 2 }
vlanCMMName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..31))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the user to configure a text string
name for this VLAN entry. This entry name is only used
as a label for this entry."
::= { vlanCMMEntry 3 }
vlanCMMEntryStatus OBJECT-TYPE
SYNTAX EntryStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object manages the creation and deletion of this
entry.
The steps recommended to add a new VLAN entry are:
1. Create a new entry in this table
vlanCMMEntryStatus = createRequest
2. Set vlanCMMVlanId as required.
Then the entry will be valid.
valid(1) - Indicates that this entry is available
for use.
createRequest(2) - A new entry will be created in this
table and will transition to the
vlanCMMEntryStatus value of
underCreation(3).
underCreation(3) - Indicates that this entry exists in the
agent but is unavailable for use. After
completing the create operation, the
agent will set this object to the value
underCreation(3).
invalid(4) - Deletes this entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) cannot be deleted."
::= { vlanCMMEntry 4 }
vlanCMMState OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
restart(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether this VLAN entry is enabled
or disabled and allows the user to disable, enable or
restart this entry except for the exceptions noted below.
The entry with a vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to enable(1) and
cannot be set to any other value. Other table entries do
not have this restriction.
Some other objects in this table may not take effect after
a change until either this object is: set to enable(1) if
this object currently has the value of disable(0), or set
to restart(2) if this object currently has the value of
enable(1). The other objects in this table that require
this object be set to enable(1) or restart(2) after a
change are noted in the description for those objects."
::= { vlanCMMEntry 5 }
vlanCMMSOLAccess OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the user to set whether the VLAN
for this entry will have access to the Serial Over
LAN (SOL) interface.
Only one VLAN entry may have this object set to enable(1).
By default, the entry with the vlanCMMIndex value of 1
(default VLAN entry) will have this object set to
enable(1).
To set this object to enable(1) on another entry, this
object must first be set to disable(0) on any entry
that has this object set to enable(1)."
::= { vlanCMMEntry 6 }
vlanCMMTagging OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the user to set whether VLAN tagging
is enabled for this VLAN entry.
This object is only configurable for the entry with the
vlanCMMIndex value of 1.
By default, the entry with the vlanCMMIndex value of 1
(default VLAN entry) will have this object set to
disable(0), all other entries will have this object set to
enable(1)."
::= { vlanCMMEntry 8 }
vlanCMMIPv4Address OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 address for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the IP address of the
ethernet interface. The IP address of the default VLAN
entry can only change by changing the IP address of the
ethernet interface.
For all other VLAN entries, this object may be set to any
IP address except the IP address of the ethernet
interface.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 31 }
vlanCMMIPv4Gateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 address for the IP gateway
for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the IP gateway for the
ethernet interface. The IP address of the default VLAN
entry can only change by changing the IP gateway of the
ethernet interface.
For all other VLAN entries, this object may be set to any
IP address except the IP address of the ethernet
interface.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 32 }
vlanCMMIPv4Mask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 subnet mask for this VLAN
entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the subnet mask of the
ethernet interface. The subnet mask of the default VLAN
entry can only change by changing the subnet mask of the
ethernet interface.
For all other VLAN entries, this object may be set to any
valid subnet mask.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 33 }
vlanCMMIPv4SubnetRoute1 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 address of the subnet route 1
for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet route.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 51 }
vlanCMMIPv4SubnetRouteMask1 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 subnet route mask 1 for this
VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet mask.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 52 }
vlanCMMIPv4SubnetRoute2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 address of the subnet route 2
for VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet route.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 53 }
vlanCMMIPv4SubnetRouteMask2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 subnet route mask 2 for this
VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet mask.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 54 }
vlanCMMIPv4SubnetRoute3 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 address of the subnet route 3
for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet route.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 55 }
vlanCMMIPv4SubnetRouteMask3 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv4 subnet route mask 3 for this
VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet mask.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 56 }
vlanCMMIPv6Address OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the IP address of the
ethernet interface. The IP address of the default VLAN
entry can only change by changing the IP address of the
ethernet interface.
For all other VLAN entries, this object may be set to any
IP address except the IP address of the ethernet
interface.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 71 }
vlanCMMIPv6AddressPrefixLen OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address prefix length for this
VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the IP address of the
ethernet interface. The IP address of the default VLAN
entry can only change by changing the IP address of the
ethernet interface.
For all other VLAN entries, this object may be set to any
IP address except the IP address of the ethernet
interface.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 72 }
vlanCMMIPv6Gateway OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address for the IP gateway
for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the IP gateway for the
ethernet interface. The IP address of the default VLAN
entry can only change by changing the IP gateway of the
ethernet interface.
For all other VLAN entries, this object may be set to any
IP address except the IP address of the ethernet
interface.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 73 }
vlanCMMIPv6SubnetRoute1 OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address of the subnet route 1
for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet route.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 91 }
vlanCMMIPv6SubnetRoutePrefixLen1 OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address prefix length of the
subnet route 1 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the IP address of the
ethernet interface. The IP address of the default VLAN
entry can only change by changing the IP address of the
ethernet interface.
For all other VLAN entries, this object may be set to any
IP address except the IP address of the ethernet
interface.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 92 }
vlanCMMIPv6SubnetRoute2 OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address of the subnet route 2
for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet route.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 93 }
vlanCMMIPv6SubnetRoutePrefixLen2 OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address prefix length of the
subnet route 2 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the IP address of the
ethernet interface. The IP address of the default VLAN
entry can only change by changing the IP address of the
ethernet interface.
For all other VLAN entries, this object may be set to any
IP address except the IP address of the ethernet
interface.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 94 }
vlanCMMIPv6SubnetRoute3 OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address of the subnet route 3
for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any
valid subnet route.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 95 }
vlanCMMIPv6SubnetRoutePrefixLen3 OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets the IPv6 address prefix length of the
subnet route 3 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN
entry) will have this object set to the IP address of the
ethernet interface. The IP address of the default VLAN
entry can only change by changing the IP address of the
ethernet interface.
For all other VLAN entries, this object may be set to any
IP address except the IP address of the ethernet
interface.
For a change of this object to take effect, the object,
vlanCMMState, must be set to enable(1) if the
vlanCMMState is currently disable(0), or set to
restart(2) if the vlanCMMState is currently enable(1)."
::= { vlanCMMEntry 96 }
-- *************************************************************************
-- vlanCMMTableCacheTimeout
-- *************************************************************************
vlanCMMTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, vlanCMMTable.
This value is static (constant) and cannot be set."
::= { vlanConfigure 21 }
-- ********************************************************************************
-- TCP/IP Protocol Configuration
-- ********************************************************************************
tcpProtocols OBJECT IDENTIFIER ::= { networkConfiguration 3 }
-- ********************************************************************************
-- SNMP Agent Configuration
-- ********************************************************************************
snmpAgentConfig OBJECT IDENTIFIER ::= { tcpProtocols 1 }
snmpSystemContact OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 48 byte string that contains the
SNMP agent contact name."
::= { snmpAgentConfig 1 }
snmpSystemLocation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 48 byte string that contains the
SNMP agent location name."
::= { snmpAgentConfig 2 }
snmpSystemAgentTrapsDisable OBJECT-TYPE
SYNTAX INTEGER {
trapsEnabled(0),
trapsDisabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable SNMP traps."
::= { snmpAgentConfig 3 }
-- ********************************************************************************
-- SNMP Agent Community Configuration
-- ********************************************************************************
snmpAgentCommunityConfig OBJECT IDENTIFIER ::= { snmpAgentConfig 4 }
-- ********************************************************************************
-- SNMP Community Configuration table
-- ********************************************************************************
snmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpCommunityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of SNMP Community entries"
::= { snmpAgentCommunityConfig 1 }
snmpCommunityEntry OBJECT-TYPE
SYNTAX SnmpCommunityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SNMP community entries"
INDEX { snmpCommunityEntryIndex }
::= { snmpCommunityTable 1 }
SnmpCommunityEntry ::= SEQUENCE {
snmpCommunityEntryIndex INTEGER,
snmpCommunityEntryCommunityName OCTET STRING,
snmpCommunityEntryCommunityIpAddress1 OCTET STRING,
snmpCommunityEntryCommunityIpAddress2 OCTET STRING,
snmpCommunityEntryCommunityIpAddress3 OCTET STRING,
snmpCommunityEntryCommunityViewType INTEGER
}
snmpCommunityEntryIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for SNMP Agent Community entry."
::= { snmpCommunityEntry 1 }
snmpCommunityEntryCommunityName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP Community entry name."
::= { snmpCommunityEntry 2 }
snmpCommunityEntryCommunityIpAddress1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP Community IP address or host name.
Can either be a dotted decimal IP string (e.g. 9.37.44.2)
or if DNS is enabled a host name. This field also allows two
wildard values for read-Traps and write-Read-Traps communities:
0.0.0.0 - allow any IPv4 address
0::0 - allow any IPv6 address"
::= { snmpCommunityEntry 3 }
snmpCommunityEntryCommunityIpAddress2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP Community IP address or host name.
Can either be a dotted decimal IP string (e.g. 9.37.44.2)
or if DNS is enabled a host name. This field also allows two
wildard values for read-Traps and write-Read-Traps communities:
0.0.0.0 - allow any IPv4 address
0::0 - allow any IPv6 address"
::= { snmpCommunityEntry 4 }
snmpCommunityEntryCommunityIpAddress3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP Community IP address or host name.
Can either be a dotted decimal IP string (e.g. 9.37.44.2)
or if DNS is enabled a host name. This field also allows two
wildard values for read-Traps and write-Read-Traps communities:
0.0.0.0 - allow any IPv4 address
0::0 - allow any IPv6 address"
::= { snmpCommunityEntry 5 }
snmpCommunityEntryCommunityViewType OBJECT-TYPE
SYNTAX INTEGER {
read-Traps(1),
write-Read-Traps(2),
traps-Only(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Access Level of the SNMPv1 managers. Note this parameter
is set for each community. Therefore all three managers
in the same community have the same access level."
::= { snmpCommunityEntry 6 }
snmpv1SystemAgentEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable the SNMPv1 agent.
NOTE: Restart the management module if this MIB object is changed
with respect to the value at system bootup time. For example the
SNMPv1 agent was set to disabled at system bootup time and now
it is enabled. Then restarting the remote supervisor is required.
Also note that when attempting to enable this agent,
the following are verified:
(1) Is there a valid system contact
(2) Is there a valid system name
(3) Is there at least one valid community name and for that
community name is there one valid IP address or hostname
(4) Are all defined community names unique
If this verification fails an error response will be returned
and the SNMPv1 agent will be left disabled."
::= { snmpAgentConfig 5 }
snmpv3SystemAgentEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable the SNMPv3 agent.
NOTE: Restart the management module if this MIB object is changed
with respect to the value at system bootup time. For example the
SNMPv3 agent was set to disabled at system bootup time and now
it is enabled. Then restarting the remote supervisor is required.
Also note that when attempting to enable this agent,
the following are verified:
(1) Is there a valid system contact?
(2) Is there a valid system name?
If this verification fails an error response will be returned
and the SNMPv3 agent will be left disabled."
::= { snmpAgentConfig 6 }
-- ********************************************************************************
-- SNMP Agent User Profile Configuration
-- ********************************************************************************
snmpAgentUserProfileConfig OBJECT IDENTIFIER ::= { snmpAgentConfig 9 }
-- ********************************************************************************
-- SNMP User Profile Configuration table
-- ********************************************************************************
snmpUserProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpUserProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of SNMPv3 User Profile entries"
::= { snmpAgentUserProfileConfig 1 }
snmpUserProfileEntry OBJECT-TYPE
SYNTAX SnmpUserProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SNMP User Profile entries"
INDEX { snmpUserProfileEntryIndex }
::= { snmpUserProfileTable 1 }
SnmpUserProfileEntry ::= SEQUENCE {
snmpUserProfileEntryIndex INTEGER,
snmpUserProfileEntryContextName OCTET STRING,
snmpUserProfileEntryAuthProt INTEGER,
snmpUserProfileEntryPrivProt INTEGER,
snmpUserProfileEntryPrivPassword OCTET STRING,
snmpUserProfileEntryViewType INTEGER,
snmpUserProfileEntryIpAddress OCTET STRING,
snmpUserProfileEntryUserId OCTET STRING
}
snmpUserProfileEntryIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for SNMPv3 Agent User Profile entry."
::= { snmpUserProfileEntry 1 }
snmpUserProfileEntryContextName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..31))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMPv3 User Profile entry - Context name
for users to access MIB objects. Note that context names can be duplicates
and can be shared among users. Empty context names are allowed. The
default context name is the empty string."
::= { snmpUserProfileEntry 3 }
snmpUserProfileEntryAuthProt OBJECT-TYPE
SYNTAX INTEGER {
md5 (2),
sha (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMPv3 User Profile entry - Authentication Protocol
supported by the user."
::= { snmpUserProfileEntry 4 }
snmpUserProfileEntryPrivProt OBJECT-TYPE
SYNTAX INTEGER {
none (1),
des (2),
aes (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMPv3 User Profile entry - Privacy Protocol
supported by the user. The Privacy Password must be set
and the Authentication Protocol must be md5 or sha
before this field may be set to des or aes."
::= { snmpUserProfileEntry 6 }
snmpUserProfileEntryPrivPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..31))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMPv3 User Profile entry - Privacy password
for the user.
NOTE: Value returned for the GET command is
meaningless for this MIB object for security reasons."
::= { snmpUserProfileEntry 7 }
snmpUserProfileEntryViewType OBJECT-TYPE
SYNTAX INTEGER {
read-Traps(1),
read-Write-Traps(2),
traps-Only(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMPv3 User Profile entry - Access level (Get, Set, and
Traps) of the user. "
::= { snmpUserProfileEntry 8 }
snmpUserProfileEntryIpAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMPv3 User Profile entry - IP address or host name.
Can either be a dotted decimal IP string (e.g. 9.37.44.2)
or if DNS is enabled a host name."
::= { snmpUserProfileEntry 9 }
snmpUserProfileEntryUserId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..31))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The userid for the SNMPv3 Agent User Profile entry."
::= { snmpUserProfileEntry 10 }
-- ********************************************************************************
-- DNS Configuration
-- ********************************************************************************
dnsConfig OBJECT IDENTIFIER ::= { tcpProtocols 2 }
dnsEnabled OBJECT-TYPE
SYNTAX INTEGER {
dnsDisabled(0),
dnsEnabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable the DNS agent.
NOTE: To alter any of the configuration settings for the DNS agent,
the following procedure should be used:
(1) This object should be set to 'disabled'
(2) Make the modifications to other settings
(3) This object should be set to 'enabled'
Also note that when attempting to enable this agent, it is verified
that there is at least one valid DNS server IP address. If this
verification fails, an error response will be returned and the DNS
agent will be left disabled."
::= { dnsConfig 1 }
dnsServerIPAddress1 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the primary DNS server IP address."
::= { dnsConfig 2 }
dnsServerIPAddress2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the secondary DNS server IP address."
::= { dnsConfig 3 }
dnsServerIPAddress3 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the tertiary DNS server IP address."
::= { dnsConfig 4 }
dnsServerIPv6Address1 OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the primary IPv6 DNS server address."
::= { dnsConfig 12 }
dnsServerIPv6Address2 OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the secondary IPv6 DNS server address."
::= { dnsConfig 13 }
dnsServerIPv6Address3 OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the tertiary IPv6 DNS server address."
::= { dnsConfig 14 }
dnsPriority OBJECT-TYPE
SYNTAX INTEGER {
ipv6(1),
ipv4(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Tells the order host names are resolved. The options are
to either first resolve with an IPv6 DNS server or to first
resolve with an IPv6 DNS server."
::= { dnsConfig 20 }
-- ********************************************************************************
-- SMTP Configuration
-- ********************************************************************************
smtpConfig OBJECT IDENTIFIER ::= { tcpProtocols 3 }
smtpServerNameOrIPAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 64 byte string that contains the
SMTP server host name or IP address (a.b.c.d)."
::= { smtpConfig 1 }
attachmentsToEmailAlerts OBJECT-TYPE
SYNTAX INTEGER {
noAttachments(0),
attachServiceInformation(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if the service information should be attached to
an email alert."
::= { smtpConfig 2 }
smtpEmailDomain OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated string that contains the
SMTP email domain. If this field is empty, the MM IP
address is used as the domain. However, some SMTP
servers (e.g. - MS Exchange 2007) do not accept an IP address and
instead require a domain name. This object can be used to set that
email domain name."
::= { smtpConfig 3 }
tcpApplicationConfig OBJECT IDENTIFIER ::= { tcpProtocols 4 }
telnetInactivityTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Default is 120 seconds. Value of zero is no timeout.
Max value is any positive 4 bytes value. Note that SSH also uses this
timeout value to wait before disconnecting inactive SSH connections."
::= { tcpApplicationConfig 1 }
commandModeInactivityTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time in seconds before the (Secure)TCP Command Mode times out.
Default value of 0 means no timeout. Max value is any positive 4 byte value."
::= { tcpApplicationConfig 2 }
secureCommandModeEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set Secure TCP Command Mode number of connections.
MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
A value of 0 means disabled.
If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable."
::= { tcpApplicationConfig 3 }
commandModeEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set TCP Command Mode number of connections.
MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
A value of 0 means disabled."
::= { tcpApplicationConfig 4 }
slpAddrType OBJECT-TYPE
SYNTAX INTEGER {
multicast(0),
broadcast(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when
slpAddrType is set to broadcast value then the multicast address set in
slpMulticastAddr will be ignored."
::= { tcpApplicationConfig 5 }
slpEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable Service Location Protocol.
NOTE: Change to Service Location Protocol will take
effect after the next restart of the MM."
::= { tcpApplicationConfig 7}
telnetEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable telnet.
NOTE: Change to telnet enable/disable will take effect immediately."
::= { tcpApplicationConfig 9 }
sshEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable SSH."
::= { tcpApplicationConfig 10 }
sslServerEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable SSL Server."
::= { tcpApplicationConfig 15 }
sslClientEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable SSL Client. If no valid client or server certificate is in place,
SSL client will not be allowed to set to enable."
::= { tcpApplicationConfig 16 }
ftpEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable FTP."
::= { tcpApplicationConfig 17 }
sftpEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable SFTP."
::= { tcpApplicationConfig 18 }
tftpEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable TFTP."
::= { tcpApplicationConfig 19 }
ftpTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time before FTP times out. Default is 300 seconds.
Value of zero is no timeout. Max value is any positive 4 byte value."
::= { tcpApplicationConfig 23 }
cimEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable CIM (Common Information Model) interface.
NOTE: Change to CIM enable/disable will take effect immediately."
::= { tcpApplicationConfig 50 }
-- The SSH Server Configuration Group
mmSshServerConfig OBJECT IDENTIFIER ::= { tcpApplicationConfig 27 }
mmSshServerHostKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF MmSshServerHostKeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains per public/private host key
pair information."
::= { mmSshServerConfig 1 }
mmSshServerHostKeyEntry OBJECT-TYPE
SYNTAX MmSshServerHostKeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information about a particular public/private
host key pair."
INDEX { mmSshServerHostKeyIndex }
::= { mmSshServerHostKeyTable 1 }
MmSshServerHostKeyEntry ::= SEQUENCE {
mmSshServerHostKeyIndex INTEGER,
mmSshServerHostKeyType INTEGER,
mmSshServerHostKeySize INTEGER,
mmSshServerHostKeyFingerprint OCTET STRING
}
mmSshServerHostKeyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the public/private host key pair."
::= { mmSshServerHostKeyEntry 1 }
mmSshServerHostKeyType OBJECT-TYPE
SYNTAX INTEGER {
sshDss (1),
sshRsa (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the public/private host key pair."
::= { mmSshServerHostKeyEntry 2 }
mmSshServerHostKeySize OBJECT-TYPE
SYNTAX INTEGER {
bits512 (1),
bits768 (2),
bits1024 (3),
bits2048 (4),
bits4096 (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the public/private host key pair.
NOTE: The MM supports only the bits2048 value."
::= { mmSshServerHostKeyEntry 3 }
mmSshServerHostKeyFingerprint OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RSA fingerprint of the public part of the host key
pair. This value can be used with the SSH client to
verify, on the initial connection, that the Secure Shell
server responding to the request is the server running
on the MM. "
::= { mmSshServerHostKeyEntry 4 }
mmSshServerHostKeyGenerate OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate the new Host Keys generation process for the
MM SSH Server.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { mmSshServerConfig 2 }
mmSshServerHostKeyGenerateProgress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicate the progress of the key generation process."
::= { mmSshServerConfig 3 }
-- TCP Port Assignment
tcpPortAssignmentCfg OBJECT IDENTIFIER ::= { tcpProtocols 5 }
tcpPortsRestoreDefault OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset all ports to default value.
http: 80
https: 443
telnet: 23
ssh: 22
SNMP agent: 161
SNMP trap: 162
TCP Command Mode: 6090
Secure TCP Command Mode: 6091
FTP: 21
FTP Data: 20
TFTP: 69
SLP: 427
CIM: 5989
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { tcpPortAssignmentCfg 1 }
httpPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"HTTP port number. Default value is 80. Once changed, the URL's have to
include :port at the end."
::= { tcpPortAssignmentCfg 2 }
httpsPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SSL port number. Default value is 443. Once changed, the URL's have to
include :port at the end."
::= { tcpPortAssignmentCfg 3 }
telnetPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Telnet port number. Default value is 23. Port change will take effect immediately."
::= { tcpPortAssignmentCfg 4 }
sshPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SSH port number. Default value is 22."
::= { tcpPortAssignmentCfg 5 }
snmpAgentPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP Agent port number. Default value is 161.
Changes take effect after several seconds."
::= { tcpPortAssignmentCfg 6 }
snmpTrapsPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP Traps port number. Default value is 162.
Changes take effect after several seconds."
::= { tcpPortAssignmentCfg 7 }
commandModePortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TCP Command Mode port number. Default value is 6090. Change will take effect immediately."
::= { tcpPortAssignmentCfg 8 }
secureCommandModePortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Secure TCP Command Mode port number. Default value is 6091. Change will take effect immediately."
::= { tcpPortAssignmentCfg 9 }
ftpPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"FTP port number. Default value is 21. Port change will take effect immediately."
::= { tcpPortAssignmentCfg 13 }
ftpDataPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"FTP Data port number. Default value is 20. Port change will take effect immediately."
::= { tcpPortAssignmentCfg 14 }
tftpPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TFTP port number. Default value is 69."
::= { tcpPortAssignmentCfg 15 }
slpPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Location Protocol port number. Default value is 427.
NOTE: This value is normally required to be 427 to interoperate properly
with other SLP enabled applications."
::= { tcpPortAssignmentCfg 19 }
cimPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CIM (Common Information Model) port number. Default value is 5989.
Port change will take effect immediately."
::= { tcpPortAssignmentCfg 50 }
-- LDAP Client Configuration
ldapClientCfg OBJECT IDENTIFIER ::= { tcpProtocols 6 }
ldapServer1NameOrIPAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 255 byte string that contains the
LDAP server host name or IP address (a.b.c.d)."
::= { ldapClientCfg 1 }
ldapServer1PortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LDAP server port number."
::= { ldapClientCfg 2 }
ldapServer2NameOrIPAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 255 byte string that contains the
LDAP server host name or IP address (a.b.c.d)."
::= { ldapClientCfg 3 }
ldapServer2PortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LDAP server port number."
::= { ldapClientCfg 4 }
ldapServer3NameOrIPAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 255 byte string that contains the
LDAP server host name or IP address (a.b.c.d)."
::= { ldapClientCfg 5 }
ldapServer3PortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LDAP server port number."
::= { ldapClientCfg 6 }
ldapRootDN OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 255 byte string that contains the
distinguished Name for root entry of directory tree.
An example might look like dn=foobar,dn=com."
::= { ldapClientCfg 7 }
ldapGroupFilter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..511))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This filter is used for group authentication. It specifies what group or
groups that this MM belongs to. If left blank, group authentication is
disabled. Otherwise, group authentication will be performed against the
filter. The filter can be a specific group name (e.g. RSAWest), a wildcard (*)
which matches everything, or a wildcard with a prefix (e.g. RSA*). The default
filter is RSA*.
After user authentication, group authentication will take place, whereby an
attempt will be made to match the group or groups (that the user belongs to)
to the group filter defined here. If there is no match, the user will not pass
authentication and will be blocked. If there is a match, the login permissions
for the user will be retrieved from the matched group(s), unless the user
already has login permissions assigned directly from the user record retrieved
from the LDAP server."
::= { ldapClientCfg 9 }
ldapBindingMethod OBJECT-TYPE
SYNTAX INTEGER {
clientAuthentication(1),
userPrincipalName(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"On initial binds to the LDAP server during user authentication, there are
two options:
Client authentication: Bind attempt is made with client DN and password
specified by this configuration parameter. If the bind is successful, we
proceed as above.
User Principal Name (UPN): Bind attempt is made directly with the credentials
used during the login process. If this succeeds, the user is deemed to have
passed the user authentication phase. Note that for Active Directory servers,
the userid can have the form someuser@somedomain or simply someuser."
::= { ldapClientCfg 10 }
ldapClientAuthenticationDN OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The initial bind to the LDAP server during user authentication can be
performed with anonymous authentication, client based authentication, or UPN.
The client based option requires a client DN and password as parameters to
the bind request. These parameters are configured here. Note that the password
can be left blank."
::= { ldapClientCfg 11 }
ldapClientAuthenticationPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The client authentication password"
::= { ldapClientCfg 12 }
ldapUIDsearchAttribute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the binding method selected is Anonymous authentication or Client
authentication, the initial bind to the LDAP server is followed by a search
request aimed at retrieving specific information about the user, including the
user's DN, login permissions, and group ownerships. In order to retrieve this
information, the search request must specify the attribute name used to
represent userids on that server. Specifically, this name is used as a search
filter against the login id entered by the user. This attribute name is
configured here. If this field is left blank, a default of uid is used during
user authentication.
For example, on Active Directory servers, the attribute name used for userids
is often sAMAccoutName.
When the binding method selected is UPN or Strict UPN, this field defaults
automatically to userPrincipalName during user authentication if the userid
entered has the form userid@somedomain."
::= { ldapClientCfg 13 }
ldapGroupSearchAttribute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the MM Group Filter name is configured, it is necessary to retrieve
from the LDAP server the list of groups that a particular user belongs to.
This is required to do group authentication. In order to retrieve this list,
the search filter sent to the server must specify the attribute name associated
with groups. This field specifies this attribute name.
If this field is left blank, the attribute name in the filter will default
to memberOf."
::= { ldapClientCfg 14 }
ldapLoginPermissionAttribute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When a user successfully authenticates via a LDAP server, it is necessary
to retrieve the login permissions for this user. In order to retrieve these
permissions, the search filter sent to the server must specify the attribute
name associated with login permissions. This field specifies this attribute
name."
::= { ldapClientCfg 15 }
ldapUseDNSOrPreConfiguredServers OBJECT-TYPE
SYNTAX INTEGER {
usePreConfiguredLDAPServers (0),
useDNSToFindLDAPServers (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The MM contains a Version 2.0 LDAP Client that may be configured to provide
user authentication through one or more LDAP servers. The LDAP server(s) to be
used for authentication can be discovered dynamically or manually pre-configured.
If the usePreConfiguredLDAPServers option is selected, up to 4 LDAP servers can
be configured. Simply enter the server's IP address or hostname (assuming DNS
is enabled). The port number for each server is optional. If left blank,
the default value of 389 is used for non-secured LDAP connections. For secured
connections, the default is 636. At least one server must be configured.
If the useDNSToFindLDAPServers is selected, the domain name need to be provided.
For LDAP Authentication Only mode, additional information such as the forest name
also need to be provided."
::= { ldapClientCfg 16 }
ldapRBSModelCfg OBJECT-TYPE
SYNTAX INTEGER {
oldPermissionString(0),
newRBSModel(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"There are two mechanisms to authenticate and authorize users on the MM when
using an LDAP-enabled server. The first mechanism (oldPermissionString), also
known as version 1, uses bitstrings to associate permissions to users and groups.
Version1 supports Active Directory, Novell eDirectory, and OPenLDAP based
servers. The second mechanism (newRBSModel), also known as version 2,
uses a new Role-Based-Security (RBS) model. This mechanism is only available
for Active Directory servers, and requires the use of a snap-in that runs on any
windows platform. This snap-in tool allows you to configure roles on an Active
Directory server of your choice, and to associate users/groups and MMs to those
roles. A role identifies the permissions given to users and groups associated with
that role, and also identifies the targets (e.g. MM) to which this role is attached.
The use of bitstrings in version 2 disappears, making the configuration much more
manageable and user-friendly. Note that if you are not using Active Directory, then
you should not enable version 2. Also note that before enabling version 2, you should
already have your roles configured on your Active Directory server. The old version 1
bitstring model cannot be automatically converted to the new version 2 model. This is
why you must configure your users and groups before enabling version 2. Once
enabled, the change takes effect immediately. The default value for this field is
oldPermissionString."
::= { ldapClientCfg 20 }
ldapTargetName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When administrator chooses Enhanced Role Based Security authentication model,
he can associate one MM with one managed target object in Snap-in (one tool
to configure LDAP users permission) via one target name. The MM target name can
be looked as alias of MM, administrator can change it according to his
configuration requirements. This is a string of up to 63 characters (plus the
null character)"
::= { ldapClientCfg 21 }
ldapAuthCfg OBJECT-TYPE
SYNTAX INTEGER {
authenticationAndAuthorization(0),
authenticationOnly(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If ldapAuthCfg is set to 0, LDAP server is used to authenticate and authorize
users. If it is set to 1, LDAP server is only used to authenticate users.
Note:LDAP Authentication Only mode is currently supported only in an Active
Directory environment."
::= { ldapClientCfg 22 }
ldapForestName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LDAP Forest Name.
Note: LDAP Forest Name is only for Active Directory environment."
::= { ldapClientCfg 23 }
ldapDomainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 255 byte string that contains the
LDAP Domain Name."
::= { ldapClientCfg 24 }
ldapServer4NameOrIPAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A NULL terminated 255 byte string that contains the
LDAP server host name or IP address (a.b.c.d)."
::= { ldapClientCfg 25 }
ldapServer4PortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LDAP server port number."
::= { ldapClientCfg 26 }
-- ********************************************************************************
-- Uplink Check Configuration
-- ********************************************************************************
uplinkCheckConfig OBJECT IDENTIFIER ::= { tcpProtocols 7 }
uplinkCheckEnabled OBJECT-TYPE
SYNTAX INTEGER {
uplinkCheckDisabled(0),
uplinkCheckEnabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable network uplink checking for physical detection.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 1 }
uplinkCheckDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay, in minutes (1-2880), between discovery of a failed network uplink and
the subsequent MM failover for physical detection.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 2 }
logicalUplinkDestination OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP for MM to check its logical link.
Specify a non-zero IP Address in order to enable logical uplink checking.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 3 }
logicalUplinkCheckEnabled OBJECT-TYPE
SYNTAX INTEGER {
uplinkCheckDisabled(0),
uplinkCheckEnabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable network uplink checking for logical detection.
logicalUplinkDestination must be set to a non-zero IP Address before enable
logical uplink checking.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 4 }
logicalUplinkCheckDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay, in minutes(1-2880), between discovery of a failed network uplink and
the subsequent MM failover for logical detection.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 5 }
physicalUplinkCheckDelayInSecs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay, in seconds(10-172800), between discovery of a failed network uplink and
the subsequent MM failover for physical detection.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 6 }
logicalUplinkCheckDelayInSecs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay, in seconds(60-172800), between discovery of a failed network uplink and
the subsequent MM failover for logical detection.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 7 }
logicalUplinkIPv6Destination OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP for MM to check its logical link using IPv6.
Specify a non-zero IP Address in order to enable logical uplink checking.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 8 }
logicalUplinkFailoverPolicy OBJECT-TYPE
SYNTAX INTEGER { either(1), both(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Determines when to failover if both an IPv4 and IPv6 destination
have been configured.
If set to 'either' the system will failover if either of the
destination's link check fails. If set to 'both' then the IPv4
and IPv6 link checks must fail before a failover will happen.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 9 }
-- ********************************************************************************
-- NTP Configuration
-- ********************************************************************************
ntpConfig OBJECT IDENTIFIER ::= { tcpProtocols 8 }
ntpEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable the NTP client. The client will update
the MM system clock at the frequency specified."
::= { ntpConfig 1 }
ntpIpAddressHostname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"NTP server's IP address or hostname if DNS is enabled
and configured."
::= { ntpConfig 2 }
ntpUpdateFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The frequency in minutes that the NTP service runs.
The value range is 0 to 45000. If the NTP update frequency
is set to 0, the MM clock can only be synchronized with the
NTP server manually."
::= { ntpConfig 3 }
ntpLastUpdate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date and time that the NTP server last updated
the system clock."
::= { ntpConfig 4 }
ntpUpdateClock OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Update the MM system clock with the specified NTP server.
A valid NTP server must be configured first."
::= { ntpConfig 5 }
ntpAuthEntry OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NTP v3 authentication entry to be used for time sync
with a secure NTP server. The format of an authentication
entry is <key index> <key type> <key>. <key index> must
be an integer between 1 and 65535. <key type> must be
M. <key> is the actual value of the authentication
key as configured on the NTP server.
The GET command returns back data in the format:
<key index> <key type>
It does not return the actual key."
::= { ntpConfig 6 }
ntpAuthEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables NTP v3 authentication"
::= { ntpConfig 7 }
-- ********************************************************************************
-- SYSLOG Configuration
-- ********************************************************************************
syslogConfig OBJECT IDENTIFIER ::= { tcpProtocols 9 }
syslogSevFilterLevel OBJECT-TYPE
SYNTAX INTEGER {
error(0),
warning(1),
information(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"syslogSevFilterLevel error/warning/information ."
::= { syslogConfig 1 }
-- ********************************************************************************
-- syslogCollector Configuration
-- ********************************************************************************
syslogCollectorConfig OBJECT IDENTIFIER ::= { syslogConfig 2 }
-- ********************************************************************************
-- Syslog Collector Configuration table
-- ********************************************************************************
syslogCollectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF SyslogCollectorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Syslog Collector entries"
::= { syslogCollectorConfig 1 }
syslogCollectorEntry OBJECT-TYPE
SYNTAX SyslogCollectorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Syslog Collector entries"
INDEX { syslogCollectorIndex }
::= { syslogCollectorTable 1 }
SyslogCollectorEntry ::= SEQUENCE {
syslogCollectorIndex INTEGER,
syslogCollectorHostnameOrIpAddress OCTET STRING,
syslogCollectorPort INTEGER,
syslogCollectorEnable INTEGER
}
syslogCollectorIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for Syslog Collector entry."
::= { syslogCollectorEntry 1 }
syslogCollectorHostnameOrIpAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Syslog Collector IP address or host name."
::= { syslogCollectorEntry 2 }
syslogCollectorPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Syslog Collector port number."
::= { syslogCollectorEntry 3 }
syslogCollectorEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Syslog Collector enable/disable."
::= { syslogCollectorEntry 4 }
-- ********************************************************************************
-- Generate test syslog packet
-- ********************************************************************************
syslogTestPacket OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Generate a test syslog packet. This will send a test syslog to all configured
and enabled syslog collectors to assist in validating the configuration.
NOTE: Value returned for the GET command is meaningless for this
MIB object."
::= { syslogConfig 3 }
-- ********************************************************************************
-- SOL (Serial Over LAN) Configuration
-- ********************************************************************************
solConfiguration OBJECT IDENTIFIER ::= { configureSP 10 }
-- ********************************************************************************
-- SOL Global Configuration
-- ********************************************************************************
solGlobalConfig OBJECT IDENTIFIER ::= { solConfiguration 1 }
solEnable OBJECT-TYPE
SYNTAX INTEGER {
solDisabled(0),
solEnabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable SOL dynamically."
::= { solGlobalConfig 1 }
solAccumulateTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value specifies how much time in millisecond SOL to buffer data before
sending the next SOL packet since the last SOL packet was transmitted.
Valid value from 5 ms to 1275 ms. The value is in 5 ms increment. Value
is not in 5 ms increment will be truncated to a nearest 5s. Default value
is 5 ms."
::= { solGlobalConfig 3 }
solCharSendThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value specifies how many characters SOL to buffer before
sending the next SOL packet since the last SOL packet was transmitted.
Valid value is from 1 to 251"
::= { solGlobalConfig 4 }
solRetry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Retry count. Valid value from 0-7. 0 means no retries after packet is transmitted.
Packet will be dropped if no ACK/NACK received by the time retries expired."
::= { solGlobalConfig 5 }
solRetryInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Retry Interval in 10 ms increment. Sets the time that the SOL will
wait before the first retry and the time between retries when sending SOL
packets to the remote blade. Value range is from 0 to 2550 ms in 10 ms
increment. 0 means retries will be sent back-to-back."
::= { solGlobalConfig 6 }
solExitToCliKeySeq OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the keystroke sequence used to escape out of SOL session and back to CLI
console. This sequence must have at least one character. The caret symbol (^)
has a special meaning in this sequence. It denotes 'Ctrl' for keystrokes that
map to Ctrl sequences (for example, ^[ for the escape key and ^M for carriage
return). All occurrences of ^ will be interpreted as part of a Ctrl sequence.
Refer to an ASCII-to-key conversion table for a complete list of Ctrl sequences.
The default value for this field is '^[(' i.e. ESC followed by (."
::= { solGlobalConfig 7 }
solResetBladeKeySeq OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the keystroke sequence used to reset the blade while in SOL session
console. This sequence must have at least one character. The caret symbol (^)
has a special meaning in this sequence. It denotes 'Ctrl' for keystrokes that
map to Ctrl sequences (for example, ^[ for the escape key and ^M for carriage
return). All occurrences of ^ will be interpreted as part of a Ctrl sequence.
Refer to an ASCII-to-key conversion table for a complete list of Ctrl sequences.
The default value for this field is '^[R^[r^[R' i.e. ESC R ESC r ESC R."
::= { solGlobalConfig 8 }
-- Blade SOL config
solBladeConfig OBJECT IDENTIFIER ::= { solConfiguration 2 }
solBladeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SolBladeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SOL Blade configuration table."
::= { solBladeConfig 1 }
solBladeEntry OBJECT-TYPE
SYNTAX SolBladeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SOL Blade table entry"
INDEX { solBladeIndex }
::= { solBladeTable 1 }
SolBladeEntry ::= SEQUENCE {
solBladeIndex INTEGER,
solBladeName OCTET STRING,
solBladeEnable INTEGER,
solBladeIpAddr IpAddress,
solBladeSessionStatus INTEGER,
solBladeCapability INTEGER,
solBladeIpAddr6 InetAddressIPv6,
solBladeRetryInterval INTEGER,
solBladeRetryCount INTEGER,
solBladeBytesSent INTEGER,
solBladeBytesReceived INTEGER,
solBladeDestinationMAC OCTET STRING,
solBladeConsoleUserId OCTET STRING,
solBladeConsoleLoginFrom OCTET STRING,
solBladeConsoleLoginStart OCTET STRING,
solBladeConsoleLoginEnd OCTET STRING
}
solBladeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SOL Blade table index."
::= { solBladeEntry 1 }
solBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { solBladeEntry 2 }
solBladeEnable OBJECT-TYPE
SYNTAX INTEGER {
solBladeDisabled(0),
solBladeEnabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable a SOL on a blade."
::= { solBladeEntry 3 }
solBladeIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS deprecated
DESCRIPTION
" This is deprecated in favor of solBladeIpAddr6.
IP address of the blade derived from the IP address range for the blade
system management processors on the blades.
NOTE: The IPv6 address for a blade can be view with the
bladeIPv6AddressTable."
::= { solBladeEntry 4 }
solBladeSessionStatus OBJECT-TYPE
SYNTAX INTEGER {
solSessionNotReady(0),
solSessionReady(1),
solSessionActive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of a blade SOL session:
solSessionNotReady: no SOL session connected to the blade.
solSessionReady: there is an SOL session to the blade.
solSessionActive: there is an SOL session to the blade and there is a
client using the SOL session."
::= { solBladeEntry 5 }
solBladeCapability OBJECT-TYPE
SYNTAX INTEGER {
notSupport(0),
support(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display whether or not the blade support SOL feature."
::= { solBladeEntry 6 }
solBladeIpAddr6 OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPv6 address of the blade."
::= { solBladeEntry 7 }
solBladeRetryInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Retry interval time in miliseconds."
::={solBladeEntry 8}
solBladeRetryCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Retry count."
::={solBladeEntry 9}
solBladeBytesSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of bytes sent."
::={solBladeEntry 10}
solBladeBytesReceived OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of bytes received."
::={solBladeEntry 11}
solBladeDestinationMAC OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" MAC address of the blade."
::={solBladeEntry 12}
solBladeConsoleUserId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Sol console user name."
::={solBladeEntry 13}
solBladeConsoleLoginFrom OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The location information from where the SOL console is logged in. "
::={solBladeEntry 14}
solBladeConsoleLoginStart OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The time that SOL console starts. "
::={solBladeEntry 15}
solBladeConsoleLoginEnd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The time that SOL console ends. "
::={solBladeEntry 16}
-- ********************************************************************************
-- Chassis Internal Network (CIN)
-- ********************************************************************************
chassisInternalNetwork OBJECT IDENTIFIER ::= { configureSP 11}
-- Maximum number of CIN definitions supported
cinsSupported OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Chassis Internal Network (CIN) definitions supported.
Currently a maximum of 14 CIN definitions can be supported."
::= { chassisInternalNetwork 1 }
-- CIN Global Configuration
cinGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
cinDisabled(0),
cinEnabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable Chassis Internal Network (CIN) function dynamically.
Enabled:
MM reads the CIN entries. For each enabled entry,
- If the CIN VLAN ID is new and does not have a CIN interface
created yet then create a new CIN interface based on that
CIN VLAN ID. Use the CIN IP address from the entry to create
a host route.
- If the CIN IP address is 0.0.0.0 then start ARP monitoring.
Disabled:
- Stop all ARP monitoring.
- Delete all host routes.
- Delete all CIN interfaces."
::= { chassisInternalNetwork 2 }
-- CIN Configuration Table
cinTable OBJECT-TYPE
SYNTAX SEQUENCE OF CinEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis Internal Network (CIN) configuration table."
::= { chassisInternalNetwork 3}
cinEntry OBJECT-TYPE
SYNTAX CinEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis Internal Network (CIN) table entry."
INDEX { cinIndex }
::= { cinTable 1 }
CinEntry ::= SEQUENCE {
cinIndex INTEGER,
cinDefExists INTEGER,
cinDelete INTEGER,
cinEnable INTEGER,
cinId INTEGER,
cinIpAddress IpAddress,
cinIpv6Address InetAddressIPv6
}
cinIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Internal Network (CIN) table index."
::= { cinEntry 1 }
cinDefExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if a Chassis Internal Network (CIN) definition exists for
this index or not."
::= { cinEntry 2 }
cinDelete OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delete Chassis Internal Network (CIN) definition.
Works like CIN entry disabled. However, the entry is also deleted.
NOTE: Value returned for the GET command is meaningless for this
MIB object. Deleting a non-defined entry does nothing."
::= { cinEntry 3 }
cinEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable a Chassis Internal Network (CIN) definition.
Enabled:
MM reads the entry and creates a new CIN interface if the CIN VLAN
ID is new and does not have a CIN interface created yet, adds host
route, and monitors communication path. Start ARP monitoring if
IP is 0.0.0.0.
Disabled:
Delete host route. If this is the last IP address that uses the CIN
interface,
- Stop ARP monitoring if IP is 0.0.0.0.
- Delete the CIN interface if there is no other entry depends on it."
::= { cinEntry 4 }
cinId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Chassis Internal Network (CIN) Virtual LAN (VLAN) ID for
the internal management network between the Management Module,
I/O Module, and the blade OS. The range of valid CIN VLAN IDs is
3 to 4094 (inclusive). This value cannot be the same as the
Serial Over LAN (SOL) or Concurrent KVM (cKVM) VLAN ID.
NOTE: If creating a new CIN definition, you must define cinId
before you define cinIpAddress.
NOTE: Before changing this value on an existing CIN definition,
you must first disable the definition."
::= { cinEntry 5 }
cinIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Chassis Internal Network (CIN) IP address.
Restrictions:
- CIN entries cannot have matching IP addresses, with the exception of 0.0.0.0.
- Multiple IP addresses of 0.0.0.0 with different VLAN IDs are allowed.
- The IP address cannot be multi-cast.
- The IP address cannot match the MM IP address.
- If the CIN IP address is 0.0.0.0, the blade IP address for CIN which is configured
in the blade's OS can not be in the same subnet as that of MM.
NOTE: If creating a new CIN definition, you must define cinId
before you define cinIpAddress.
NOTE: Before changing this value on an existing CIN definition,
you must first disable the definition.
NOTE: When ipv6 is enable on one interface, this column will
display all zero IPv4 address"
::= { cinEntry 6}
cinIpv6Address OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Chassis Internal Network (CIN) IPv6 address
NOTE: When ipv4 is enable on one interface,this column will display
all zero IPv6 address."
::= { cinEntry 7}
-- CIN Status Table
cinStatus OBJECT IDENTIFIER ::= { chassisInternalNetwork 4 }
cinStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CinStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Chassis Internal Network (CIN) status entry information."
::= { cinStatus 1 }
cinStatusEntry OBJECT-TYPE
SYNTAX CinStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Chassis Internal Network (CIN) status table entry."
INDEX { cinStatusIndex }
::= { cinStatusTable 1 }
CinStatusEntry ::= SEQUENCE {
cinStatusIndex INTEGER,
cinStatusString OCTET STRING
}
cinStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Chassis Internal Network (CIN) status log index number.
For consistent results, view as a table and not as individual entries."
::= { cinStatusEntry 1 }
cinStatusString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of a Chassis Internal Network (CIN) connection. For example:
Index:1 VLANID:4094 IPADDR:192.168.70.100 MAC:01:0A:0B:00:01:01 Type:Learned Status:Operational
Index is the status entry number in the status table. Followed by the
VLAN ID, IP address, and MAC address that the Management Module is
communicating with on the CIN connection.
Type is either 'Configured' or 'Learned'. Learned implies that the
Management Module dynamically discovered the IP address.
Configured means that the address was explicitly configured in
the Management Module.
Status can be 'Operational', 'Not Operational', or 'Disabled'.
'Operational' means the Management Module can ping the CIN IP address.
'Not Operational' means that the Management Module cannot ping the CIN
IP address. Verify that the blade and I/O Module are configured properly
and that their configurations are compatible with the Management Module.
The blade OS also needs to have an IP host route defined
(e.g. route add -host 192.168.70.100 eth0.4094).
I/O Modules need to have a VLAN defined containing the blade's and the
MM's port. Blade and I/O Modules need to be powered up and operational.
'Disabled' means that the CIN configuration has been disabled by a
Management Module administrator.
For consistent results, view as a table and not as individual entries."
::= { cinStatusEntry 2 }
-- ********************************************************************************
-- Restart Control
-- ********************************************************************************
restartSPImmediately OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart the MM immediately.
NOTE: Value returned for the GET command is meaningless for
this MIB object."
::= { restartReset 4 }
restartStandbyMM OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restarts the Standby MM from the Primary MM.
NOTE: Value returned for the GET command is meaningless for
this MIB object.
NOTE: This mib object is only applicable to systems with a standby MM."
::= { restartReset 5}
switchOverRedundantMM OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Switch over to the redundant Management Module.
The failover will not occur if the standby or primary MM is in flashing mode.
NOTE: Value returned for the GET command is meaningless for
this MIB object.
NOTE: This mib object is only applicable to systems with a redundant MM."
::= { restartReset 7 }
resetSPConfigAndRestart OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Will cause all the MM information to be reset to it's
initial factory defaults (all previous configuration
information is lost) and the MM will be re-started.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { restartReset 20 }
resetSPConfigAndRestartSaveLogs OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Will cause all the MM information to be reset to it's
initial factory defaults (all previous configuration
information is lost) and the MM will be re-started. The
logs will be saved.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { restartReset 21 }
-- ********************************************************************************
-- processorBlade
-- ********************************************************************************
-- This group of objects provides information specific to blades
processorBlade OBJECT IDENTIFIER ::= { components 1 }
-- ********************************************************************************
-- Blade policy control
-- ********************************************************************************
bladePolicyControl OBJECT IDENTIFIER ::= { processorBlade 4 }
bladePolicyControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladePolicyControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade power policy control information.
Contains power on/off enablement status for each blade."
::= { bladePolicyControl 1 }
bladePolicyControlEntry OBJECT-TYPE
SYNTAX BladePolicyControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Power policy control entry"
INDEX { policyControlIndex }
::= { bladePolicyControlTable 1 }
BladePolicyControlEntry ::= SEQUENCE {
policyControlIndex INTEGER,
policyControlBladeId INTEGER,
policyControlBladeExists INTEGER,
policyControlBladePowerState INTEGER,
policyControlBladeHealthState INTEGER,
policyControlBladeName OCTET STRING,
policyLocalPowerControlEnable INTEGER,
policyWakeOnLanControlEnable INTEGER
}
policyControlIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade power policy control index."
::= { bladePolicyControlEntry 1 }
policyControlBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladePolicyControlEntry 2 }
policyControlBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladePolicyControlEntry 3 }
policyControlBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power state for blade.
0 = off, 1 = on, 3 = standby, 4 = hibernate, 255 = unknown."
::= { bladePolicyControlEntry 4 }
policyControlBladeHealthState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
critical(3),
kernelMode(4),
discovering(5),
commError(6),
noPower(7),
flashing(8),
initFailure(9),
insufficientPower(10),
powerDenied(11),
maintMode(12),
firehoseDump(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system health state for the blade.
Unknown: Blade is in an undefined state.
Good: Blade is operating normally.
Warning: One or more outstanding warnings exist for this blade.
Critical: One or more outstanding critical events for this blade.
Kernel Mode: Blade is in kernel mode.
Discovering: The MM is currently in the process of discovering this blade.
Communications Error: The MM failed to communicate with this blade.
No Power: No power to the blade's domain.
Flashing: Flashing in progress.
Initialization Failure: Blade failed to initialized.
Insufficient Power: Not enough power is left in the blade's domain to power the blade.
Power Denied: Power was denied to the blade."
::= { bladePolicyControlEntry 5 }
policyControlBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladePolicyControlEntry 6 }
policyLocalPowerControlEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade local power policy control enablement status."
::= { bladePolicyControlEntry 7 }
policyWakeOnLanControlEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade Wake On LAN enablement status.
If WOL is not supported by the blade, it displays 'notApplicable'
and WOL can not be enabled or disabled."
::= { bladePolicyControlEntry 10 }
bladePolicy OBJECT IDENTIFIER ::= { bladePolicyControl 2}
-- global blade control policy
bladePolicyLocalPowerControlEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade local power control enablement status policy."
::= { bladePolicy 1 }
bladePolicyWakeOnLanControlEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade Wake On LAN enablement status policy. The
notApplicable(255) enumeration is not valid for SET
operations.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladePolicy 4 }
-- ********************************************************************************
-- Blade system health state params
-- ********************************************************************************
bladeMonitors OBJECT IDENTIFIER ::= { processorBlade 5 }
bladeSystemStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeSystemStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade status information."
::= { bladeMonitors 1 }
bladeSystemStatusEntry OBJECT-TYPE
SYNTAX BladeSystemStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade system status entry"
INDEX { bladeStatusIndex }
::= { bladeSystemStatusTable 1 }
BladeSystemStatusEntry ::= SEQUENCE {
bladeStatusIndex INTEGER,
bladeId INTEGER,
bladeExists INTEGER,
bladePowerState INTEGER,
bladeHealthState INTEGER,
bladeName OCTET STRING,
bladeRemotePowerEnable INTEGER,
bladeConnectionType INTEGER,
bladeRemoteWakeOnLanEnable INTEGER,
bladeServerExpansion INTEGER,
bladeWidth INTEGER,
bladeServerExpansion2 INTEGER,
bladeConnectionType2 INTEGER,
bladeConnectionType3 INTEGER,
bladeConnectionType4 INTEGER,
bladeConnectionType5 INTEGER,
bladeHighSpeedConnectionType INTEGER,
bladeIOCompatibility OCTET STRING,
bladeInventoryReady INTEGER
}
bladeStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade system status index."
::= { bladeSystemStatusEntry 1 }
bladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeSystemStatusEntry 2 }
bladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeSystemStatusEntry 3 }
bladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeSystemStatusEntry 4 }
bladeHealthState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
critical(3),
kernelMode(4),
discovering(5),
commError(6),
noPower(7),
flashing(8),
initFailure(9),
insufficientPower(10),
powerDenied(11),
maintMode(12),
firehoseDump(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system health state for the blade.
Unknown: Blade is in an undefined state.
Good: Blade is operating normally.
Warning: One or more outstanding warnings exist for this blade.
Critical: One or more outstanding critical events for this blade.
Kernel Mode: Blade is in kernel mode.
Discovering: The MM is currently in the process of discovering this blade.
Communications Error: The MM failed to communicate with this blade.
No Power: No power to the blade's domain.
Flashing: Flashing in progress.
Initialization Failure: Blade failed to initialized.
Insufficient Power: Not enough power is left in the blade's domain to power the blade.
Power Denied: Power was denied to the blade."
::= { bladeSystemStatusEntry 5 }
bladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeSystemStatusEntry 6 }
bladeRemotePowerEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote power state for the blade."
::= { bladeSystemStatusEntry 7 }
bladeConnectionType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet(1),
fiber(2),
serial(3),
opticalPassThrough(4),
infiniband(5),
iSCSI(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Connection type of the expansion card number one."
::= { bladeSystemStatusEntry 10 }
bladeRemoteWakeOnLanEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote wake on LAN state for the blade."
::= { bladeSystemStatusEntry 13 }
bladeServerExpansion OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This shows whether this blade has an expansion board attached.
A yes column indicates that an expansion board is installed for this
blade."
::= { bladeSystemStatusEntry 14 }
bladeWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The width of the blade including any supplement blade attached to it"
::= { bladeSystemStatusEntry 15 }
bladeServerExpansion2 OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This shows whether this blade has an expansion board attached.
A yes column indicates that an expansion board is installed for this
blade."
::= { bladeSystemStatusEntry 17 }
bladeConnectionType2 OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet(1),
fiber(2),
serial(3),
opticalPassThrough(4),
infiniband(5),
iSCSI(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Connection type of the expansion card number 2."
::= { bladeSystemStatusEntry 22 }
bladeConnectionType3 OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet(1),
fiber(2),
serial(3),
opticalPassThrough(4),
infiniband(5),
iSCSI(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Connection type of the expansion card number 3."
::= { bladeSystemStatusEntry 23 }
bladeConnectionType4 OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet(1),
fiber(2),
serial(3),
opticalPassThrough(4),
infiniband(5),
iSCSI(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Connection type of the expansion card number 4."
::= { bladeSystemStatusEntry 24 }
bladeConnectionType5 OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet(1),
fiber(2),
serial(3),
opticalPassThrough(4),
infiniband(5),
iSCSI(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Connection type of the expansion card number 5."
::= { bladeSystemStatusEntry 25 }
bladeHighSpeedConnectionType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet(1),
fiber(2),
serial(3),
opticalPassThrough(4),
infiniband(5),
iSCSI(6),
infinibandPassThrough(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Connection type of the high speed expansion card number 1."
::= { bladeSystemStatusEntry 41 }
bladeIOCompatibility OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"I/O compatibility status for the blade.
The possible values and their meanings are as follows:
unknown: This indicates a communication error for the blade.
ok: This is the normal (good) case where the blade and the
corresponding I/O modules it is internally wired to have no
compatibility issues.
noIOMs: This means there are no I/O modules in any of the
corresponding I/O module bays this blade is internally wired to.
attention: This indicates that one or more of the corresponding
I/O modules are in communication error.
mismatch: This indicates one of the following cases:
Fabric types are incompatible
An unknown I/O module type
An unknown fabric type on the blade"
::= { bladeSystemStatusEntry 51 }
bladeInventoryReady OBJECT-TYPE
SYNTAX INTEGER {
notReady(0),
ready(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When a blade management controller or the MM is reset, the
blade inventory data is refreshed in the MM database. This includes
items like IBM VPD (e.g. - serial number, UUID) and MAC address information.
Applications need to know when this information has been populated on the MM
before they begin to query it using SNMP or other means. This simple flag
object will return a ready or notReady indication for each blade regarding the
status of this information.
Notes:
For blades that are experiencing a 'communication failure' or
'initialization failure' condition, this object will continue to indicate
notReady until the condition is resolved. Therefore, any application that
polls this object should also incorporate a timeout period."
::= { bladeSystemStatusEntry 52 }
bladeHealthSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeHealthSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade health summary information.
Contains information about the overall blade health status."
::= { bladeMonitors 2 }
bladeHealthSummaryEntry OBJECT-TYPE
SYNTAX BladeHealthSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade health summary entry"
INDEX { bladeHealthSummaryIndex }
::= { bladeHealthSummaryTable 1 }
BladeHealthSummaryEntry ::= SEQUENCE {
bladeHealthSummaryIndex INTEGER,
bladeHealthSummaryBladeId INTEGER,
bladeHealthSummarySeverity OCTET STRING,
bladeHealthSummaryDescription OCTET STRING,
bladeHealthSummaryDateTime OCTET STRING,
bladeHealthSummaryEventID OCTET STRING
}
bladeHealthSummaryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade health summary index."
::= { bladeHealthSummaryEntry 1 }
bladeHealthSummaryBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeHealthSummaryEntry 2 }
bladeHealthSummarySeverity OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary severity."
::= { bladeHealthSummaryEntry 3 }
bladeHealthSummaryDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary description."
::= { bladeHealthSummaryEntry 4 }
bladeHealthSummaryDateTime OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary date time."
::= { bladeHealthSummaryEntry 5 }
bladeHealthSummaryEventID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary event ID."
::= { bladeHealthSummaryEntry 6 }
bladeTemperaturesTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeTemperaturesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade temperatures information."
::= { bladeMonitors 3 }
bladeTemperaturesEntry OBJECT-TYPE
SYNTAX BladeTemperaturesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade temperatures table entry"
INDEX { temperatureIndex }
::= { bladeTemperaturesTable 1 }
BladeTemperaturesEntry ::= SEQUENCE {
temperatureIndex INTEGER,
temperatureBladeId INTEGER,
temperatureBladeExists INTEGER,
temperatureBladePowerState INTEGER,
temperatureBladeName OCTET STRING,
temperatureCPU1 OCTET STRING,
temperatureCPU2 OCTET STRING,
temperatureCPU3 OCTET STRING,
temperatureCPU4 OCTET STRING,
temperatureDASD1 OCTET STRING,
bladeSensorTempCapability INTEGER,
bladeSensor1Temp OCTET STRING,
bladeSensor2Temp OCTET STRING,
bladeSensor3Temp OCTET STRING,
bladeSensor4Temp OCTET STRING,
bladeSensor5Temp OCTET STRING,
bladeSensor6Temp OCTET STRING,
bladeSensor7Temp OCTET STRING,
bladeSensor8Temp OCTET STRING,
bladeSensor9Temp OCTET STRING
}
temperatureIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade temperatures table index."
::= { bladeTemperaturesEntry 1 }
temperatureBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeTemperaturesEntry 2 }
temperatureBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeTemperaturesEntry 3 }
temperatureBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeTemperaturesEntry 4 }
temperatureBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeTemperaturesEntry 5 }
temperatureCPU1 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 6 }
temperatureCPU2 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 7 }
temperatureCPU3 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 8 }
temperatureCPU4 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 9 }
temperatureDASD1 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade DASD temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 10 }
bladeSensorTempCapability OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade is IPMI capable or not."
::= { bladeTemperaturesEntry 11 }
bladeSensor1Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 12 }
bladeSensor2Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 13 }
bladeSensor3Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 14 }
bladeSensor4Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 15 }
bladeSensor5Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 16 }
bladeSensor6Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 17 }
bladeSensor7Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 18 }
bladeSensor8Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 19 }
bladeSensor9Temp OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature reading for an IPMI blade expressed in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperaturesEntry 20 }
bladeTemperatureThresholdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeTemperatureThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade temperature thresholds information."
::= { bladeMonitors 4 }
bladeTemperatureThresholdsEntry OBJECT-TYPE
SYNTAX BladeTemperatureThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade temperature thresholds table entry"
INDEX { temperatureThresholdIndex }
::= { bladeTemperatureThresholdsTable 1 }
BladeTemperatureThresholdsEntry ::= SEQUENCE {
temperatureThresholdIndex INTEGER,
temperatureThresholdBladeId INTEGER,
temperatureThresholdBladeExists INTEGER,
temperatureThresholdBladePowerState INTEGER,
temperatureThresholdBladeName OCTET STRING,
temperatureCPU1HardShutdown OCTET STRING,
temperatureCPU1Warning OCTET STRING,
temperatureCPU1WarningReset OCTET STRING,
temperatureCPU2HardShutdown OCTET STRING,
temperatureCPU2Warning OCTET STRING,
temperatureCPU2WarningReset OCTET STRING,
temperatureCPU3HardShutdown OCTET STRING,
temperatureCPU3Warning OCTET STRING,
temperatureCPU3WarningReset OCTET STRING,
temperatureCPU4HardShutdown OCTET STRING,
temperatureCPU4Warning OCTET STRING,
temperatureCPU4WarningReset OCTET STRING,
temperatureDASD1HardShutdown OCTET STRING,
temperatureDASD1Warning OCTET STRING,
temperatureDASD1WarningReset OCTET STRING,
bladeTempThresholdSensorCapability INTEGER,
temperatureSensor1HardShutdown OCTET STRING,
temperatureSensor1Warning OCTET STRING,
temperatureSensor1WarningReset OCTET STRING,
temperatureSensor2HardShutdown OCTET STRING,
temperatureSensor2Warning OCTET STRING,
temperatureSensor2WarningReset OCTET STRING,
temperatureSensor3HardShutdown OCTET STRING,
temperatureSensor3Warning OCTET STRING,
temperatureSensor3WarningReset OCTET STRING,
temperatureSensor4HardShutdown OCTET STRING,
temperatureSensor4Warning OCTET STRING,
temperatureSensor4WarningReset OCTET STRING,
temperatureSensor5HardShutdown OCTET STRING,
temperatureSensor5Warning OCTET STRING,
temperatureSensor5WarningReset OCTET STRING,
temperatureSensor6HardShutdown OCTET STRING,
temperatureSensor6Warning OCTET STRING,
temperatureSensor6WarningReset OCTET STRING,
temperatureSensor7HardShutdown OCTET STRING,
temperatureSensor7Warning OCTET STRING,
temperatureSensor7WarningReset OCTET STRING,
temperatureSensor8HardShutdown OCTET STRING,
temperatureSensor8Warning OCTET STRING,
temperatureSensor8WarningReset OCTET STRING,
temperatureSensor9HardShutdown OCTET STRING,
temperatureSensor9Warning OCTET STRING,
temperatureSensor9WarningReset OCTET STRING
}
temperatureThresholdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade temperature threshold table index."
::= { bladeTemperatureThresholdsEntry 1 }
temperatureThresholdBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeTemperatureThresholdsEntry 2 }
temperatureThresholdBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeTemperatureThresholdsEntry 3 }
temperatureThresholdBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeTemperatureThresholdsEntry 4 }
temperatureThresholdBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeTemperatureThresholdsEntry 5 }
temperatureCPU1HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU hard shutdown temperature in degrees
centigrade(C). If the component's temperature rises above
this value the system will be powered off immediately.
If enabled, a critical alert/event will be generated.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 6 }
temperatureCPU1Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU warning temperature in degrees centigrade(C).
If the temperature rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 7 }
temperatureCPU1WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU warning reset temperature in degrees
centigrade(C). If the temperature rises above this value and
if a warning alert/event had previously been created then the
alert/event will be reset.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 8 }
temperatureCPU2HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU hard shutdown temperature in degrees
centigrade(C). If the component's temperature rises above
this value the system will be powered off immediately.
If enabled, a critical alert/event will be generated.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 9 }
temperatureCPU2Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU warning temperature in degrees centigrade(C).
If the temperature rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 10 }
temperatureCPU2WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU warning reset temperature in degrees
centigrade(C). If the temperature rises above this value and
if a warning alert/event had previously been created then the
alert/event will be reset.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 11 }
temperatureCPU3HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU hard shutdown temperature in degrees
centigrade(C). If the component's temperature rises above
this value the system will be powered off immediately.
If enabled, a critical alert/event will be generated.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 12 }
temperatureCPU3Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU warning temperature in degrees centigrade(C).
If the temperature rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 13 }
temperatureCPU3WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU warning reset temperature in degrees
centigrade(C). If the temperature rises above this value and
if a warning alert/event had previously been created then the
alert/event will be reset.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 14 }
temperatureCPU4HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU hard shutdown temperature in degrees
centigrade(C). If the component's temperature rises above
this value the system will be powered off immediately.
If enabled, a critical alert/event will be generated.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 15 }
temperatureCPU4Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU warning temperature in degrees centigrade(C).
If the temperature rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 16 }
temperatureCPU4WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade CPU warning reset temperature in degrees
centigrade(C). If the temperature rises above this value and
if a warning alert/event had previously been created then the
alert/event will be reset.
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 17 }
temperatureDASD1HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade DASD hard shutdown temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 18 }
temperatureDASD1Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade DASD warning temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 19 }
temperatureDASD1WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade DASD warning reset temperature in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 20 }
bladeTempThresholdSensorCapability OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade is IPMI capable or not."
::= { bladeTemperatureThresholdsEntry 21 }
temperatureSensor1HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 22 }
temperatureSensor1Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 23 }
temperatureSensor1WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 24 }
temperatureSensor2HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 25 }
temperatureSensor2Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 26 }
temperatureSensor2WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 27 }
temperatureSensor3HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 28 }
temperatureSensor3Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 29 }
temperatureSensor3WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 30 }
temperatureSensor4HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 31 }
temperatureSensor4Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 32 }
temperatureSensor4WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 33 }
temperatureSensor5HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 34 }
temperatureSensor5Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 35 }
temperatureSensor5WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 36 }
temperatureSensor6HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 37 }
temperatureSensor6Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 38 }
temperatureSensor6WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 39 }
temperatureSensor7HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 40 }
temperatureSensor7Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 41 }
temperatureSensor7WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 42 }
temperatureSensor8HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 43 }
temperatureSensor8Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 44 }
temperatureSensor8WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 45 }
temperatureSensor9HardShutdown OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 46 }
temperatureSensor9Warning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 47 }
temperatureSensor9WarningReset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
An octet string expressed as 'sddd.dd Centigrade' where:
s is the sign ('-' for negative or blank space for positive)
d is a decimal digit or blank space for leading zeroes.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Temperature' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeTemperatureThresholdsEntry 48 }
bladeVoltagesTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeVoltagesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade voltages information."
::= { bladeMonitors 5 }
bladeVoltagesEntry OBJECT-TYPE
SYNTAX BladeVoltagesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade voltages table entry"
INDEX { voltageIndex }
::= { bladeVoltagesTable 1 }
BladeVoltagesEntry ::= SEQUENCE {
voltageIndex INTEGER,
voltageBladeId INTEGER,
voltageBladeExists INTEGER,
voltageBladePowerState INTEGER,
voltageBladeName OCTET STRING,
bladePlus5Volt OCTET STRING,
bladePlus3pt3Volt OCTET STRING,
bladePlus12Volt OCTET STRING,
bladePlus2pt5Volt OCTET STRING,
bladePlus1pt5Volt OCTET STRING,
bladePlus1pt25Volt OCTET STRING,
bladeVRM1Volt OCTET STRING,
bladeSensorVoltCapability INTEGER,
bladeSensor1Volt OCTET STRING,
bladeSensor2Volt OCTET STRING,
bladeSensor3Volt OCTET STRING,
bladeSensor4Volt OCTET STRING,
bladeSensor5Volt OCTET STRING,
bladeSensor6Volt OCTET STRING,
bladeSensor7Volt OCTET STRING,
bladeSensor8Volt OCTET STRING,
bladeSensor9Volt OCTET STRING,
bladeSensor10Volt OCTET STRING,
bladeSensor11Volt OCTET STRING,
bladeSensor12Volt OCTET STRING,
bladeSensor13Volt OCTET STRING,
bladeSensor14Volt OCTET STRING,
bladeSensor15Volt OCTET STRING,
bladeSensor16Volt OCTET STRING,
bladeSensor17Volt OCTET STRING,
bladeSensor18Volt OCTET STRING,
bladeSensor19Volt OCTET STRING,
bladeSensor20Volt OCTET STRING,
bladeSensor21Volt OCTET STRING,
bladeSensor22Volt OCTET STRING,
bladeSensor23Volt OCTET STRING,
bladeSensor24Volt OCTET STRING,
bladeSensor25Volt OCTET STRING,
bladeSensor26Volt OCTET STRING,
bladeSensor27Volt OCTET STRING,
bladeSensor28Volt OCTET STRING,
bladeSensor29Volt OCTET STRING,
bladeSensor30Volt OCTET STRING
}
voltageIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade voltages table index."
::= { bladeVoltagesEntry 1 }
voltageBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeVoltagesEntry 2 }
voltageBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeVoltagesEntry 3 }
voltageBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeVoltagesEntry 4 }
voltageBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeVoltagesEntry 5 }
bladePlus5Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"+5 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 6 }
bladePlus3pt3Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"+3.3 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 7 }
bladePlus12Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"+12 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 8 }
bladePlus2pt5Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"+2.5 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 10 }
bladePlus1pt5Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"+1.5 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 11 }
bladePlus1pt25Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"+1.25 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 12 }
bladeVRM1Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VRM 1 voltage reading for the blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 13 }
bladeSensorVoltCapability OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade is IPMI capable or not."
::= { bladeVoltagesEntry 14 }
bladeSensor1Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 15 }
bladeSensor2Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 16 }
bladeSensor3Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 17 }
bladeSensor4Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 18 }
bladeSensor5Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 19 }
bladeSensor6Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 20 }
bladeSensor7Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 21 }
bladeSensor8Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 22 }
bladeSensor9Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 23 }
bladeSensor10Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 24 }
bladeSensor11Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 25 }
bladeSensor12Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 26 }
bladeSensor13Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 27 }
bladeSensor14Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 28 }
bladeSensor15Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 29 }
bladeSensor16Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 30 }
bladeSensor17Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 31 }
bladeSensor18Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 32 }
bladeSensor19Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 33 }
bladeSensor20Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 34 }
bladeSensor21Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 35 }
bladeSensor22Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 36 }
bladeSensor23Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 37 }
bladeSensor24Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 38 }
bladeSensor25Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 39 }
bladeSensor26Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 40 }
bladeSensor27Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 41 }
bladeSensor28Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 42 }
bladeSensor29Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 43 }
bladeSensor30Volt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltagesEntry 44 }
bladeVoltageThresholdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeVoltageThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade VoltageThresholds information."
::= { bladeMonitors 6 }
bladeVoltageThresholdsEntry OBJECT-TYPE
SYNTAX BladeVoltageThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade voltage thresholds table entry"
INDEX { voltageThresholdIndex }
::= { bladeVoltageThresholdsTable 1 }
BladeVoltageThresholdsEntry ::= SEQUENCE {
voltageThresholdIndex INTEGER,
voltageThresholdBladeId INTEGER,
voltageThresholdBladeExists INTEGER,
voltageThresholdBladePowerState INTEGER,
voltageThresholdBladeName OCTET STRING,
bladePlus5VoltHighWarning OCTET STRING,
bladePlus5VoltLowWarning OCTET STRING,
bladePlus3pt3VoltHighWarning OCTET STRING,
bladePlus3pt3VoltLowWarning OCTET STRING,
bladePlus12VoltHighWarning OCTET STRING,
bladePlus12VoltLowWarning OCTET STRING,
bladePlus2pt5VoltHighWarning OCTET STRING,
bladePlus2pt5VoltLowWarning OCTET STRING,
bladePlus1pt5VoltHighWarning OCTET STRING,
bladePlus1pt5VoltLowWarning OCTET STRING,
bladePlus1pt25VoltHighWarning OCTET STRING,
bladePlus1pt25VoltLowWarning OCTET STRING,
bladeVoltThresholdSensorCapability INTEGER,
bladeSensor1VoltHighWarning OCTET STRING,
bladeSensor1VoltLowWarning OCTET STRING,
bladeSensor2VoltHighWarning OCTET STRING,
bladeSensor2VoltLowWarning OCTET STRING,
bladeSensor3VoltHighWarning OCTET STRING,
bladeSensor3VoltLowWarning OCTET STRING,
bladeSensor4VoltHighWarning OCTET STRING,
bladeSensor4VoltLowWarning OCTET STRING,
bladeSensor5VoltHighWarning OCTET STRING,
bladeSensor5VoltLowWarning OCTET STRING,
bladeSensor6VoltHighWarning OCTET STRING,
bladeSensor6VoltLowWarning OCTET STRING,
bladeSensor7VoltHighWarning OCTET STRING,
bladeSensor7VoltLowWarning OCTET STRING,
bladeSensor8VoltHighWarning OCTET STRING,
bladeSensor8VoltLowWarning OCTET STRING,
bladeSensor9VoltHighWarning OCTET STRING,
bladeSensor9VoltLowWarning OCTET STRING,
bladeSensor10VoltHighWarning OCTET STRING,
bladeSensor10VoltLowWarning OCTET STRING,
bladeSensor11VoltHighWarning OCTET STRING,
bladeSensor11VoltLowWarning OCTET STRING,
bladeSensor12VoltHighWarning OCTET STRING,
bladeSensor12VoltLowWarning OCTET STRING,
bladeSensor13VoltHighWarning OCTET STRING,
bladeSensor13VoltLowWarning OCTET STRING,
bladeSensor14VoltHighWarning OCTET STRING,
bladeSensor14VoltLowWarning OCTET STRING,
bladeSensor15VoltHighWarning OCTET STRING,
bladeSensor15VoltLowWarning OCTET STRING,
bladeSensor16VoltHighWarning OCTET STRING,
bladeSensor16VoltLowWarning OCTET STRING,
bladeSensor17VoltHighWarning OCTET STRING,
bladeSensor17VoltLowWarning OCTET STRING,
bladeSensor18VoltHighWarning OCTET STRING,
bladeSensor18VoltLowWarning OCTET STRING,
bladeSensor19VoltHighWarning OCTET STRING,
bladeSensor19VoltLowWarning OCTET STRING,
bladeSensor20VoltHighWarning OCTET STRING,
bladeSensor20VoltLowWarning OCTET STRING,
bladeSensor21VoltHighWarning OCTET STRING,
bladeSensor21VoltLowWarning OCTET STRING,
bladeSensor22VoltHighWarning OCTET STRING,
bladeSensor22VoltLowWarning OCTET STRING,
bladeSensor23VoltHighWarning OCTET STRING,
bladeSensor23VoltLowWarning OCTET STRING,
bladeSensor24VoltHighWarning OCTET STRING,
bladeSensor24VoltLowWarning OCTET STRING,
bladeSensor25VoltHighWarning OCTET STRING,
bladeSensor25VoltLowWarning OCTET STRING,
bladeSensor26VoltHighWarning OCTET STRING,
bladeSensor26VoltLowWarning OCTET STRING,
bladeSensor27VoltHighWarning OCTET STRING,
bladeSensor27VoltLowWarning OCTET STRING,
bladeSensor28VoltHighWarning OCTET STRING,
bladeSensor28VoltLowWarning OCTET STRING,
bladeSensor29VoltHighWarning OCTET STRING,
bladeSensor29VoltLowWarning OCTET STRING,
bladeSensor30VoltHighWarning OCTET STRING,
bladeSensor30VoltLowWarning OCTET STRING
}
voltageThresholdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade voltage thresholds table index."
::= { bladeVoltageThresholdsEntry 1 }
voltageThresholdBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeVoltageThresholdsEntry 2 }
voltageThresholdBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeVoltageThresholdsEntry 3 }
voltageThresholdBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeVoltageThresholdsEntry 4 }
voltageThresholdBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeVoltageThresholdsEntry 5 }
bladePlus5VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 6 }
bladePlus5VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage drops below this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 7 }
bladePlus3pt3VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 8 }
bladePlus3pt3VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage drops below this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 9 }
bladePlus12VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 10 }
bladePlus12VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage drops below this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 11 }
bladePlus2pt5VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 14 }
bladePlus2pt5VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage drops below this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 15 }
bladePlus1pt5VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 16 }
bladePlus1pt5VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage drops below this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 17 }
bladePlus1pt25VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage rises above this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 18 }
bladePlus1pt25VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading expressed in Volts(V).
If the voltage drops below this value a warning alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 19 }
bladeVoltThresholdSensorCapability OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade is IPMI capable or not."
::= { bladeVoltageThresholdsEntry 22 }
bladeSensor1VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 23 }
bladeSensor1VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 24 }
bladeSensor2VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 25 }
bladeSensor2VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 26 }
bladeSensor3VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 27 }
bladeSensor3VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 28 }
bladeSensor4VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 29 }
bladeSensor4VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 30 }
bladeSensor5VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 31 }
bladeSensor5VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 32 }
bladeSensor6VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 33 }
bladeSensor6VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 34 }
bladeSensor7VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 35 }
bladeSensor7VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 36 }
bladeSensor8VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 37 }
bladeSensor8VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 38 }
bladeSensor9VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 39 }
bladeSensor9VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 40 }
bladeSensor10VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 41 }
bladeSensor10VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 42 }
bladeSensor11VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 43 }
bladeSensor11VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 44 }
bladeSensor12VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 45 }
bladeSensor12VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 46 }
bladeSensor13VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 47 }
bladeSensor13VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 48 }
bladeSensor14VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 49 }
bladeSensor14VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 50 }
bladeSensor15VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 51 }
bladeSensor15VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 52 }
bladeSensor16VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 53 }
bladeSensor16VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 54 }
bladeSensor17VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 55 }
bladeSensor17VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 56 }
bladeSensor18VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 57 }
bladeSensor18VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 58 }
bladeSensor19VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 59 }
bladeSensor19VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 60 }
bladeSensor20VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 61 }
bladeSensor20VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 62 }
bladeSensor21VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 63 }
bladeSensor21VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 64 }
bladeSensor22VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 65 }
bladeSensor22VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 66 }
bladeSensor23VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 67 }
bladeSensor23VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 68 }
bladeSensor24VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 69 }
bladeSensor24VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 70 }
bladeSensor25VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 71 }
bladeSensor25VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 72 }
bladeSensor26VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 73 }
bladeSensor26VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 74 }
bladeSensor27VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 75 }
bladeSensor27VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 76 }
bladeSensor28VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 77 }
bladeSensor28VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 78 }
bladeSensor29VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 79 }
bladeSensor29VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 80 }
bladeSensor30VoltHighWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage rises above this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 81 }
bladeSensor30VoltLowWarning OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage warning threshold reading for IPMI blades expressed in Volts(V).
If the voltage drops below this value, a critical alert/event
if enabled will be generated.
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off."
::= { bladeVoltageThresholdsEntry 82 }
bladePowerRestart OBJECT IDENTIFIER ::= { processorBlade 6 }
-- blade power/restart control
bladePowerRestartTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladePowerRestartEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade remote power control information.
Contains power on/off enablement status for each blade."
::= { bladePowerRestart 1 }
bladePowerRestartEntry OBJECT-TYPE
SYNTAX BladePowerRestartEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade power restart table entry"
INDEX { powerRestartIndex }
::= { bladePowerRestartTable 1 }
BladePowerRestartEntry ::= SEQUENCE {
powerRestartIndex INTEGER,
powerRestartBladeId INTEGER,
powerRestartBladeExists INTEGER,
powerRestartBladePowerState INTEGER,
powerRestartBladeHealthState INTEGER,
powerRestartBladeName OCTET STRING,
powerOnOffBlade INTEGER,
restartBlade INTEGER,
restartBladeSMP INTEGER,
restartBladeNMI INTEGER,
restartBladeClearNVRAM INTEGER,
restartBladeInvokeDiags INTEGER,
restartBladeInvokeDiagsFromDefaultBootList INTEGER,
restartBladeToSMSBootMenu INTEGER,
bladePowerEnableSMSBootMenu INTEGER
}
powerRestartIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade power restart table index."
::= { bladePowerRestartEntry 1 }
powerRestartBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladePowerRestartEntry 2 }
powerRestartBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladePowerRestartEntry 3 }
powerRestartBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified.
If the state cannot be determined, the unknown(255) is returned."
::= { bladePowerRestartEntry 4 }
powerRestartBladeHealthState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
critical(3),
kernelMode(4),
discovering(5),
commError(6),
noPower(7),
flashing(8),
initFailure(9),
insufficientPower(10),
powerDenied(11),
maintMode(12),
firehoseDump(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system health state for the blade.
Unknown: Blade is in an undefined state.
Good: Blade is operating normally.
Warning: One or more outstanding warnings exist for this blade.
Critical: One or more outstanding critical events for this blade.
Kernel Mode: Blade is in kernel mode.
Discovering: The MM is currently in the process of discovering this blade.
Communications Error: The MM failed to communicate with this blade.
No Power: No power to the blade's domain.
Flashing: Flashing in progress.
Initialization Failure: Blade failed to initialized.
Insufficient Power: Not enough power is left in the blade's domain to power the blade.
Power Denied: Power was denied to the blade."
::= { bladePowerRestartEntry 5 }
powerRestartBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladePowerRestartEntry 6 }
powerOnOffBlade OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
softoff(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control the power state of a specific blade.
Off: Power Off Blade.
On: Power On Blade.
Softoff: Shut Down OS and Power Off Blade. This operation is not
supported on all blades.
NOTE: Value returned for the GET command is meaningless
for this MIB object. The powerRestartBladePowerState MIB object should be
used to check the power state of the blade(s)"
::= { bladePowerRestartEntry 7 }
restartBlade OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart a blade.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladePowerRestartEntry 8 }
restartBladeSMP OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart a blade's system management processor.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladePowerRestartEntry 9 }
restartBladeNMI OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Issue an NMI to the blade. This option is not supported
on all blades.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladePowerRestartEntry 10 }
restartBladeClearNVRAM OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart a blade and set NVRAM to default values. This option is not
supported on all blades.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladePowerRestartEntry 11 }
restartBladeInvokeDiags OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart a blade and boot into diagnostic mode. This option is not
supported on all blades.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladePowerRestartEntry 12 }
restartBladeInvokeDiagsFromDefaultBootList OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart a blade and boot into diagnostic mode from Default Boot List
as defined on the blade. This option is not supported on all blades.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladePowerRestartEntry 13 }
restartBladeToSMSBootMenu OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Restart a blade to SMS boot menu. This option is not supported on
all blades, and at the time of this MIB definition was only supported on
POWER blades.
This object is deprecated and please use the bladePowerEnableSMSBootMenu
object.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladePowerRestartEntry 14 }
bladePowerEnableSMSBootMenu OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/disables a blade restart to the SMS boot menu.
Setting this object to 'enable(1)' will cause a reboot of
the node to the SMS menu.
This option is not supported by all blades, and at the time of
this MIB definition was only supported on POWER blades."
::= { bladePowerRestartEntry 15 }
bladeConfiguration OBJECT IDENTIFIER ::= { processorBlade 7 }
-- blade power/restart control
bladeConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeConfigurationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade configuration information.
Contains boot mode and auto power on/off settings for each
blade."
::= { bladeConfiguration 1 }
bladeConfigurationEntry OBJECT-TYPE
SYNTAX BladeConfigurationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade configuration table entry"
INDEX { configurationIndex }
::= { bladeConfigurationTable 1 }
BladeConfigurationEntry ::= SEQUENCE {
configurationIndex INTEGER,
configurationBladeId INTEGER,
configurationBladeExists INTEGER,
configurationBladePowerState INTEGER,
configurationBladeName OCTET STRING,
configurationBladeActiveBootMode INTEGER,
configurationBladePendingBootMode INTEGER,
configurationBladeAutoPowerOn INTEGER,
configurationBladePowerOnRestartDelay INTEGER
}
configurationIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade configuration table index."
::= { bladeConfigurationEntry 1 }
configurationBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeConfigurationEntry 2 }
configurationBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeConfigurationEntry 3 }
configurationBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeConfigurationEntry 4 }
configurationBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeConfigurationEntry 5 }
configurationBladeActiveBootMode OBJECT-TYPE
SYNTAX INTEGER {
temporary(1),
permanent(2),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the active copy of the firmware from which the blade is booting.
NOTE: Some blades do not support the automatic boot recovery. It displays
'notApplicable' for such blades.
Booting from the temporary copy is recommended since it typically contains the
latest enhancements and fixes. Switching to the permanent copy should be reserved
for when booting from the temporary copy is no longer possible."
::= { bladeConfigurationEntry 7 }
configurationBladePendingBootMode OBJECT-TYPE
SYNTAX INTEGER {
temporary(1),
permanent(2),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the copy of the firmware from which the blade will boot
after the next reboot.
NOTE: Some blades do not support the automatic boot recovery. It displays
'notApplicable' for such blades and the value can not be set.
Booting from the temporary copy is recommended since it typically contains the
latest enhancements and fixes. Switching to the permanent copy should be reserved
for when booting from the temporary copy is no longer possible."
::= { bladeConfigurationEntry 8 }
configurationBladeAutoPowerOn OBJECT-TYPE
SYNTAX INTEGER {
restore(1),
auto(2),
manual(3),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade auto-power on policy.
- restore: blade will be powered on which were previously on.
- auto: blade will automatically be powered on when power is applied to the chassis.
- manual: blade will be left off until manually powered on by the user.
- notApplicable: is a read-only value, this value cannot be set."
::= { bladeConfigurationEntry 9 }
configurationBladePowerOnRestartDelay OBJECT-TYPE
SYNTAX INTEGER (0..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart delay (in seconds) when power is applied to a blade."
::= { bladeConfigurationEntry 10 }
-- Power Management Policy Settings
bladePowerManagementPolicy OBJECT IDENTIFIER ::= { bladeConfiguration 2 }
powerManagementPolicy OBJECT-TYPE
SYNTAX INTEGER {
power-module-redundancy(0),
power-module-redundancy-throttle(1),
basic(2),
power-source-redundancy(16),
power-source-redundancy-throttle(17)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Power Module Redundancy
Intended for a single power source into the chassis where each
Power Module is on its own dedicated circuit. Maximum power is
limited to one less than the number of Power Modules when more
than one Power Module is present. One Power Module can fail
without affecting compute node operation. Multiple Power Module
failures can cause the chassis to power off. Note that some compute
nodes may not be allowed to power on if doing so would exceed the
policy power limit.
Power Module Redundancy with Compute Nodes Throttling Allowed
Very similar to Power Module Redundancy. This policy allows for a
higher power limit; however, capable compute nodes may be allowed
to throttle down if one Power Module fails.
Basic Power Management
Maximum power limit is higher than other policies and is limited
only by the nameplate power of all the Power Modules combined.
This is the least conservative approach, since it does not provide
any protection for power source or Power Module failure. If any
single power supply fails, compute node and/or chassis operation
may be affected.
Power Source Redundancy
Intended for dual power sources into the chassis. Maximum power is
limited to the capacity of half the number of installed power modules.
This is the most conservative approach and is recommended when all power
modules are installed. When the chassis is correctly wired with dual
power sources, one power source can fail without affecting compute
node server operation. Note that some compute nodes may not be allowed
to power on if doing so would exceed the policy power limit.
Power Source Redundancy with Compute Node Throttling Allowed
Very similar to the Power Source Redundancy. This policy allows
for a higher power limit, however capable compute nodes may be allowed
to throttle down if one power source fails.
Please see the powerPolicyTable for more information regarding this setting."
::= { bladePowerManagementPolicy 1 }
acousticMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
acoustic-quiet-level1(1),
acoustic-quiet-level2(2),
acoustic-quiet-level3(3),
acoustic-quiet-level4(4),
acoustic-quiet-level5(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Acoustic mode setting for thermal conditions. A setting
of disabled (0), disables this feature. A setting of
acoustic-quiet-level1 (5) is the least restrictive and the
least quiet sound level. A setting of
acoustic-quiet-level5 (1) is the most restrictive and
the most quiet sound level. Some values may not be valid on
some chassis. A bad value will be returned in this case."
::= { bladePowerManagementPolicy 3 }
bladeBootCountPowerOnTime OBJECT IDENTIFIER ::= { processorBlade 10 }
-- blade Count of number of boots for a blade and its Power On Time
bladeBootCountPowerOnTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeBootCountPowerOnTimeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table per blade of the number of boots for the blade and
the number of seconds the blade has been powered on."
::= { bladeBootCountPowerOnTime 1 }
bladeBootCountPowerOnTimeEntry OBJECT-TYPE
SYNTAX BladeBootCountPowerOnTimeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The number of boots for the blade and
the number of seconds the blade has been powered on."
INDEX { bootCountPowerOnTimeBladeIndex }
::= { bladeBootCountPowerOnTimeTable 1 }
BladeBootCountPowerOnTimeEntry ::= SEQUENCE {
bootCountPowerOnTimeBladeIndex INTEGER,
bootCountPowerOnTimeBladeId INTEGER,
bootCountPowerOnTimeBoots INTEGER,
bootCountPowerOnTimeSecs INTEGER
}
bootCountPowerOnTimeBladeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade boot count/Power On Time table index."
::= { bladeBootCountPowerOnTimeEntry 1 }
bootCountPowerOnTimeBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeBootCountPowerOnTimeEntry 2 }
bootCountPowerOnTimeBoots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade Boot Count. If there is no blade in the
given slot then this value is undefined. Writing this
value resets the Boot Count to zero."
::= { bladeBootCountPowerOnTimeEntry 3 }
bootCountPowerOnTimeSecs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade Power On Time in seconds. If there is no blade in
the given slot then this value is undefined. Writing this
value resets the Power On Time to zero."
::= { bladeBootCountPowerOnTimeEntry 4 }
bladeVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the virtual LAN ID for the internal management network between the MM and
the blade system management processors (BSMPs). The range of valid VLAN ID's
is 3 to 4095."
::= { processorBlade 11 }
---
--- Blade Bay Data Table MIB objects
---
bladeBayDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeBayDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade bay data (BBD) information."
::= { processorBlade 13 }
bladeBayDataEntry OBJECT-TYPE
SYNTAX BladeBayDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade bay data (BBD) table entry."
INDEX { bayDataIndex }
::= { bladeBayDataTable 1 }
BladeBayDataEntry ::= SEQUENCE {
bayDataIndex INTEGER,
bayDataBladeId INTEGER,
bayDataBladeExists INTEGER,
bayDataBladePowerState INTEGER,
bayDataBladeName OCTET STRING,
bayData OCTET STRING,
bayDataBladeStatus INTEGER
}
bayDataIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade bay data (BBD) table index."
::= { bladeBayDataEntry 1 }
bayDataBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeBayDataEntry 2 }
bayDataBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the server blade specified exists or not."
::= { bladeBayDataEntry 3 }
bayDataBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the blade specified."
::= { bladeBayDataEntry 4 }
bayDataBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { bladeBayDataEntry 5 }
bayData OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A null terminated string that defines the Blade Bay Data (BBD). This data
is pushed to the blade's BSMP and SMBIOS structures, where it can used
by the blade's OS. Up to 60 characters can be defined plus a Null
terminator."
::= { bladeBayDataEntry 6 }
bayDataBladeStatus OBJECT-TYPE
SYNTAX INTEGER {
supported(0),
bsmp(1),
notPresent(2),
discovering(3),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This shows Blade Bay Data (BBD) status. 0 means the blade fully
supports BBD; 1 means that the blade's BIOS does not support BBD;
2 means that there is no blade in the bay; 3 means that the blade is
being discovered. 255 means that the blade does not support BBD."
::= { bladeBayDataEntry 7 }
bladeNetworkConfiguration OBJECT IDENTIFIER ::= { processorBlade 12 }
-- blade network configuration for all blades
bladeIPv4ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeIPv4ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of all blades' network interfaces."
::= { bladeNetworkConfiguration 5 }
bladeIPv4ConfigEntry OBJECT-TYPE
SYNTAX BladeIPv4ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade configuration table entry"
INDEX { bladeIPv4ConfigIndex, bladeIPv4ConfigPortIndex }
::= { bladeIPv4ConfigTable 1 }
BladeIPv4ConfigEntry ::= SEQUENCE {
bladeIPv4ConfigIndex INTEGER,
bladeIPv4ConfigPortIndex INTEGER,
bladeIPv4ConfigPortLabel OCTET STRING,
bladeIPv4ConfigPhysicalLinkStatus INTEGER,
bladeIPv4ConfigPhysicalLinkState INTEGER,
bladeIPv4ConfigIPAddr IpAddress,
bladeIPv4ConfigSubnetMask IpAddress,
bladeIPv4ConfigGatewayAddr IpAddress,
bladeIPv4ConfigVlanId INTEGER,
bladeIPv4ConfigDHCPEnable INTEGER,
bladeIPv4ConfigMACAddr OCTET STRING
}
bladeIPv4ConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade's slot number."
::= { bladeIPv4ConfigEntry 1 }
bladeIPv4ConfigPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical port number of the given entry."
::= { bladeIPv4ConfigEntry 2 }
bladeIPv4ConfigPortLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show string label that identifies the interface."
::= { bladeIPv4ConfigEntry 3 }
bladeIPv4ConfigPhysicalLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether this network interface port is up or down.
If this network interface doesn't support up/down, show
'notApplicable(255)'."
::= { bladeIPv4ConfigEntry 4 }
bladeIPv4ConfigPhysicalLinkState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
loopback(2),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configuration object for requesting the physical port
to be either, down(0), up(1) or loopback(2). To get the
current status of a physical port, use the object,
bladeIPv4ConfigPhysicalLinkStatus.
If this network interface doesn't support up/down/loopback,
show 'notApplicable(255)'."
::= { bladeIPv4ConfigEntry 5 }
bladeIPv4ConfigIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Show/modify current IP address of the blade network
interface. Note that only if the
bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
bladeIPv4ConfigDHCPEnable is not 'useDhcp(1)', should the
IP address be pushed down to blade System Management
Processor."
::= { bladeIPv4ConfigEntry 6 }
bladeIPv4ConfigSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Show or modifie current subnet mask of the blade network
interface. Note that only if the
bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
bladeIPv4ConfigDHCPEnable is not 'useDhcp(1)', should the
IP address be pushed down to blade System Management
Processor."
::= { bladeIPv4ConfigEntry 7 }
bladeIPv4ConfigGatewayAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Show or modify current IP gateway of the blade network
interface. Note that only if the
bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
bladeIPv4ConfigDHCPEnable is not 'useDhcp(1)', should the
IP address be pushed down to blade System Management
Processor."
::= { bladeIPv4ConfigEntry 8 }
bladeIPv4ConfigVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Virtual LAN ID for supported network
interface cards (NICs). The range of valid VLAN ID's
is 0 to 4095."
::= { bladeIPv4ConfigEntry 9 }
bladeIPv4ConfigDHCPEnable OBJECT-TYPE
SYNTAX INTEGER {
useStatic(0),
useDhcp(1),
tryDhcpThenTryStatic(2),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP config method on the blade network interface to modify
mode to static IP, DHCP and 'try DHCP then try static'.
If this network interface doesn't support DHCP, show
'notApplicable(255)'."
::= { bladeIPv4ConfigEntry 10 }
bladeIPv4ConfigMACAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show the blade network interface MAC address. If this
network interface doesn't support MAC, show
'notApplicable'."
::= { bladeIPv4ConfigEntry 11 }
bladeIPv6Config OBJECT IDENTIFIER ::= { bladeNetworkConfiguration 10 }
bladeIPv6ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeIPv6ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of IPv6 configuration options for blades.
NOTE: This MIB object is not applicable to blades that
do not support IPv6."
::= { bladeIPv6Config 1 }
bladeIPv6ConfigEntry OBJECT-TYPE
SYNTAX BladeIPv6ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPv6 configuration options for a blade.
NOTE: This MIB object is not applicable to blades that
do not support IPv6."
INDEX { bladeIPv6ConfigIndex, bladeIPv6ConfigPortIndex }
::= { bladeIPv6ConfigTable 1 }
BladeIPv6ConfigEntry ::= SEQUENCE {
bladeIPv6ConfigIndex INTEGER,
bladeIPv6ConfigPortIndex INTEGER,
bladeIPv6ConfigEnabled INTEGER,
bladeIPv6ConfigStatic INTEGER,
bladeDHCPv6ConfigEnabled INTEGER,
bladeIPv6ConfigStatelessEnabled INTEGER
}
bladeIPv6ConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade's slot number"
::= { bladeIPv6ConfigEntry 1 }
bladeIPv6ConfigPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical port number of the given entry"
::= { bladeIPv6ConfigEntry 2 }
bladeIPv6ConfigEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 support on the blade."
::= { bladeIPv6ConfigEntry 3 }
bladeIPv6ConfigStatic OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 static configuration support on the blade."
::= { bladeIPv6ConfigEntry 4 }
bladeDHCPv6ConfigEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables DHCPv6 address configuration support on the blade."
::= { bladeIPv6ConfigEntry 5 }
bladeIPv6ConfigStatelessEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 stateless auto-configuration support on the blade."
::= { bladeIPv6ConfigEntry 6 }
bladeIPv6AddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeIPv6AddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of assigned IPv6 addresses for blades.
NOTE: This MIB object is not applicable to blades that
do not support IPv6."
::= { bladeIPv6Config 2 }
bladeIPv6AddressEntry OBJECT-TYPE
SYNTAX BladeIPv6AddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The assigned IPv6 address for a given blade.
NOTE: This MIB object is not applicable to blades that
do not support IPv6."
INDEX { bladeIPv6AddressIndex, bladeIPv6AddressPortIndex, bladeIPv6AddressEntryIndex}
::= { bladeIPv6AddressTable 1 }
BladeIPv6AddressEntry ::= SEQUENCE {
bladeIPv6AddressIndex INTEGER,
bladeIPv6AddressPortIndex INTEGER,
bladeIPv6AddressEntryIndex INTEGER,
bladeIPv6AddressType INTEGER,
bladeIPv6Address InetAddressIPv6,
bladeIPv6AddressPrefixLen INTEGER,
bladeIPv6AddressDefaultRoute InetAddressIPv6
}
bladeIPv6AddressIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade's slot number."
::= { bladeIPv6AddressEntry 1 }
bladeIPv6AddressPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade's physical port number for the given entry."
::= { bladeIPv6AddressEntry 2 }
bladeIPv6AddressEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The blade's address entry index."
::= { bladeIPv6AddressEntry 3 }
bladeIPv6AddressType OBJECT-TYPE
SYNTAX INTEGER
{ active-static(1),
dhcp6(2),
link-local(3),
autconfig(4),
current(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address type."
::= { bladeIPv6AddressEntry 4 }
bladeIPv6Address OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The assigned IPv6 address.
Note: 'write' is for static ipv6 only."
::= { bladeIPv6AddressEntry 5 }
bladeIPv6AddressPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The prefix length for the given address.
Note: 'write' is for static ipv6 only."
::= { bladeIPv6AddressEntry 6 }
bladeIPv6AddressDefaultRoute OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default route used for the given address.
Note: 'write' is for static ipv6 only."
::= { bladeIPv6AddressEntry 7 }
bladeSPEthOverUSBInterface OBJECT IDENTIFIER ::= { processorBlade 14 }
spEthOverUSBInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SPEthOverUSBInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade Service Processor's Ethernet over USB interface."
::= { bladeSPEthOverUSBInterface 1 }
spEthOverUSBInterfaceEntry OBJECT-TYPE
SYNTAX SPEthOverUSBInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade Service Processor's Ethernet over USB interface entry."
INDEX { spEthOverUSBInterfaceIndex }
::= { spEthOverUSBInterfaceTable 1 }
SPEthOverUSBInterfaceEntry ::= SEQUENCE {
spEthOverUSBInterfaceIndex INTEGER,
spEthOverUSBInterfaceBladeId OCTET STRING,
spEthOverUSBInterfaceBladeExists INTEGER,
spEthOverUSBInterfaceBladeName OCTET STRING,
spEthOverUSBInterfaceEnable INTEGER
}
spEthOverUSBInterfaceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Processor's Ethernet over USB interface table index."
::= { spEthOverUSBInterfaceEntry 1 }
spEthOverUSBInterfaceBladeId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { spEthOverUSBInterfaceEntry 2 }
spEthOverUSBInterfaceBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the blade specified exists or not."
::= { spEthOverUSBInterfaceEntry 3 }
spEthOverUSBInterfaceBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a null terminated string."
::= { spEthOverUSBInterfaceEntry 6 }
spEthOverUSBInterfaceEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the user to view the status of, and enable
or disable, a blade Service Processor's command interface on
Ethernet-over-USB.
NOTE: If the blade either does not exist or does not support
Ethernet-over-USB command interface. It displays 'notApplicable'.
NOTE: It will take about 10 or more seconds for the disable/enable
setting to take effect."
::= { spEthOverUSBInterfaceEntry 9 }
-- ********************************************************************************
-- Blade boot Device Info
-- ********************************************************************************
bootDeviceInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF BootDeviceInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade boot device information. Contains
info for the boot devices for each blade."
::= { processorBlade 15 }
bootDeviceInfoEntry OBJECT-TYPE
SYNTAX BootDeviceInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Boot device entry"
INDEX { bootInfoTopologyIndex, bootDeviceIndex }
::= { bootDeviceInfoTable 1 }
BootDeviceInfoEntry ::= SEQUENCE {
bootInfoTopologyIndex OCTET STRING,
bootDeviceIndex INTEGER,
bootDeviceId OCTET STRING,
bootDeviceActive INTEGER,
bootDevicePresence INTEGER,
bootDeviceLabel OCTET STRING,
bootDeviceUserLabel OCTET STRING,
bootDeviceOrder INTEGER
}
bootInfoTopologyIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a node containing boot devices in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component inventory table is indexed by this unique topology
path and the relevant numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade"
::= { bootDeviceInfoEntry 1 }
bootDeviceIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index for the boot device for the given topology id."
::= { bootDeviceInfoEntry 2 }
bootDeviceId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The device Id of the boot device."
::= { bootDeviceInfoEntry 3 }
bootDeviceActive OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the boot device is active."
::= { bootDeviceInfoEntry 4 }
bootDevicePresence OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the boot device is present."
::= { bootDeviceInfoEntry 5 }
bootDeviceLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The device label of the boot device."
::= { bootDeviceInfoEntry 6 }
bootDeviceUserLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user label of the boot device."
::= { bootDeviceInfoEntry 7 }
bootDeviceOrder OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number in boot order of the boot device.
0 specifies this device is not in the boot sequence."
::= { bootDeviceInfoEntry 8 }
-- ********************************************************************************
-- Blade boot sequence Info
-- ********************************************************************************
bootSequenceInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF BootSequenceInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade boot sequence information. Contains
the boot sequence information for each blade."
::= { processorBlade 16 }
bootSequenceInfoEntry OBJECT-TYPE
SYNTAX BootSequenceInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Boot sequence entry"
INDEX { bootSequenceInfoTopologyIndex }
::= { bootSequenceInfoTable 1 }
BootSequenceInfoEntry ::= SEQUENCE {
bootSequenceInfoTopologyIndex OCTET STRING,
bootSequenceInfoMaxBootDevices INTEGER,
bootSequenceInfoBootSequence OCTET STRING
}
bootSequenceInfoTopologyIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a row in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component inventory table is indexed by this unique topology
path and the relevant numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade"
::= { bootSequenceInfoEntry 1 }
bootSequenceInfoMaxBootDevices OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of boot devices."
::= { bootSequenceInfoEntry 2 }
bootSequenceInfoBootSequence OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A blank delimited string of device ids in the order of the boot sequence.
For example, 00000001 00000002 00000005. Note that the boot sequence list
can change from a given order and can grow from a given order, but cannot
be reduced in length. For example, if the sequence starts as 00000001 00000011,
it could change to 00000001 00000014 or grow to 00000001 00000014 00000002. In the
example above, if the 00000002 selection was no longer desired, the list should be
changed to 00000001 00000014 00000014, essentially repeating the last device ID.
Device ids must be listed in bootDeviceInfoTable."
::= { bootSequenceInfoEntry 3 }
-- ********************************************************************************
-- Switch module control and config
-- ********************************************************************************
switchModule OBJECT IDENTIFIER ::= { components 3 }
-- Server blade switch module control and configuration
-- ********************************************************************************
-- Switch module control
-- ********************************************************************************
switchModuleControl OBJECT IDENTIFIER ::= { switchModule 1 }
-- Server blade switch module control
smControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module control table."
::= { switchModuleControl 1 }
smControlEntry OBJECT-TYPE
SYNTAX SmControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module control table entry"
INDEX { smControlIndex }
::= { smControlTable 1 }
SmControlEntry ::= SEQUENCE {
smControlIndex INTEGER,
switchModuleControlId INTEGER,
smPostResultsAvailable INTEGER,
smPostResultsValue OCTET STRING,
switchModuleMemDiagEnableDisable INTEGER,
smCfgCtrlEnableDisable INTEGER,
smExtEthPortsEnableDisable INTEGER,
smCfgCtrlOnResetEnableDisable INTEGER,
smHealthState INTEGER,
smPMState INTEGER,
smPMCtrlEnableDisable INTEGER,
smIOCompatibility OCTET STRING
}
smControlIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module control table index."
::= { smControlEntry 1 }
switchModuleControlId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4),
module5(5),
module6(6),
module7(7),
module8(8),
module9(9),
module10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module numeric identifier."
::= { smControlEntry 2 }
smPostResultsAvailable OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes whether the switch module POST diagnostic result
value contained in the smPostResultsValue is valid."
::= { smControlEntry 3 }
smPostResultsValue OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The range of values and meanings are as follows:
0x00 - 0x7F ( 0 - 127) Base internal functions
0x80 - 0x9F (128 - 159) Internal interface failures
0xA0 - 0xAF (160 - 175) External interface failures
0xB0 - 0xFE (176 - 254) Reserved
0xFF (255) Switch completed POST successfully"
::= { smControlEntry 4 }
switchModuleMemDiagEnableDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Switch module memory diagnostics enabled or disabled.
NOTE: The numeric values for the enumerations for enabled and disabled are non-traditional
(i.e. - 0 and 1 are swapped), however, they cannot be changed since this MIB is already
published. "
::= { smControlEntry 5 }
smCfgCtrlEnableDisable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Switch module configuration control. When set to enabled, only the MM can manage
the module.
This MIB object can not be set, if MM grants switch module the Protected Mode permission.
This MIB object can not be set, if the switch module is participating in the Stacking Mode
and external management is protected.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode. A value of disabled(0) will be returned."
::= { smControlEntry 6 }
smExtEthPortsEnableDisable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Switch module non-management ethernet ports enabled or disabled.
This MIB object can not be set, if MM grants switch module the
Protected Mode permission.
This MIB object can not be set, if the switch module is participating
in the Stacking Mode and External Port Access is protected."
::= { smControlEntry 7 }
smCfgCtrlOnResetEnableDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Switch module configuration control on resets (default and unsolicited).
When set to enabled, the factory default IP configuration will become
active when the I/O module is reset to factory defaults by either the
management module or the I/O module. If an I/O module reset is initiated
by a source other than the management module then the previous IP configuration
will be in affect. In both these cases the MM will lose IP communications with
the IOM.
This MIB object can not be set, if MM grants switch module the Protected Mode
permission and switch module goes into Protected Mode.
NOTE: The numeric values for the enumerations for enabled and disabled are non-traditional
(i.e. - 0 and 1 are swapped), however, they cannot be changed since this MIB is already
published.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode. A value of disabled(1) will be returned."
::= { smControlEntry 9 }
smHealthState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
bad(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The health state for the switch module.
0 = unknown, 1 = good, 2 = warning, 3 = bad."
::= { smControlEntry 15}
smPMState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
pending(1),
attention(2),
active(3),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Protected Mode Status for the switch module.
standby- Protected Mode capability exists on the IOM but has not
been activated on the switch module or the MM.
pending - Protected Mode has been activated on the MM but not yet on the switch module.
active - Protected Mode is active on both the switch module and the MM.
attention - Protected Mode is enabled on the switch module but not on the MM."
::= { smControlEntry 16}
smPMCtrlEnableDisable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MM Protected Mode permission for the switch module.
disabled - allow MM to disable Protected Mode Permission for the switch module.
enabled - allow MM to grant Protected Mode Permission for the switch module."
::= { smControlEntry 17}
smIOCompatibility OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The compatibility status for the I/O module.
The possible values and their meanings are as follows:
Unknown: This indicates a communication error for the I/O module.
OK: This is the normal (good) case where there are no compatibility
issues between the I/O module and the modules it is internally wired to.
No Fabric: This means the other end is not populated on any of the
modules this I/O module is internally wired to (e.g. this is an
Infiniband switch but none of the blades it is internally wired to
has an expansion card attached in the corresponding expansion slot).
Attention: Indicates one of the following cases:
One or more of the modules this I/O module is internally wired to is in communication error
The I/O module is powered off and at least one module it is internally wired to is powered on
Mismatch: Indicates one of the following cases:
Fabric types are incompatible
An unknown I/O module type
An unknown fabric type on a module the I/O module is internally wired to."
::= { smControlEntry 18}
smPingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmPingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows pinging one of the active assigned addresses of an I/O module.
NOTE: This table is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { switchModuleControl 2 }
smPingEntry OBJECT-TYPE
SYNTAX SmPingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Represents a single address that can be pinged"
INDEX { smPingIndex, smPingAddressEntryIndex }
::= { smPingTable 1 }
SmPingEntry ::= SEQUENCE {
smPingIndex INTEGER,
smPingAddressEntryIndex INTEGER,
smPingAddress OCTET STRING,
smPingAddressExecute INTEGER
}
smPingIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module's slot number"
::= { smPingEntry 1 }
smPingAddressEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module's address entry index"
::= { smPingEntry 2 }
smPingAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module's IPv4 or IPv6 address"
::= { smPingEntry 3 }
smPingAddressExecute OBJECT-TYPE
SYNTAX INTEGER { execute(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pings the given IP address.
NOTE: The GET operation for this object is meaningless."
::= { smPingEntry 4 }
smPowerRestartTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmPowerRestartEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module power restart table."
::= { switchModuleControl 7 }
smPowerRestartEntry OBJECT-TYPE
SYNTAX SmPowerRestartEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module power restart table entry"
INDEX { smPowerRestartIndex }
::= { smPowerRestartTable 1 }
SmPowerRestartEntry ::= SEQUENCE {
smPowerRestartIndex INTEGER,
smPowerRestartId INTEGER,
smSwitchExists INTEGER,
smMACAddress OCTET STRING,
smIPAddress IpAddress,
switchModulePowerOnOff INTEGER,
smReset INTEGER,
smResetToDefault INTEGER,
smRestartAndRunStdDiag INTEGER,
smRestartAndRunExtDiag INTEGER,
smRestartAndRunFullDiag INTEGER,
smPowerOnRestartDelay INTEGER,
smSwitchWidth INTEGER,
smManufacturingID OCTET STRING,
smStackingModeState INTEGER,
smStackingModeInfo OCTET STRING
}
smPowerRestartIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module power restart index."
::= { smPowerRestartEntry 1 }
smPowerRestartId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4),
module5(5),
module6(6),
module7(7),
module8(8),
module9(9),
module10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module numeric identifier."
::= { smPowerRestartEntry 2 }
smSwitchExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the switch module specified exists or not."
::= { smPowerRestartEntry 3 }
smMACAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module MAC address.
For IOMs which are members of a stack, this field is not applicable and should be disregarded."
::= { smPowerRestartEntry 5 }
smIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module current IP address.
If the switch module is participating in the Stacking Mode
and IP Configuration is protected, then the stack management
IP address is displayed.
NOTE: IPv6 addresses for the switch can be view with the
smIPv6AddressTable."
::= { smPowerRestartEntry 6 }
switchModulePowerOnOff OBJECT-TYPE
SYNTAX INTEGER {
poweroff(0),
poweron(1),
shutdownInProgress(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"I/O Module power on or power off. If powering on a currently
powered off I/O Module, then the I/O Module will execute a POST.
The results of this POST will need to be retrieved using the 'Post Results'
command.
NOTE:
When powering off a currently powered on I/O Module, a minimum of 1 second
is needed to allow the module to power off before powering back on.
The value 'shutdownInProgress' is for I/O Modules that may take some time to
transition from 'poweron' to 'poweroff'.
This MIB object can not be set, if MM grants the I/O Module the Protected Mode
permission and module goes into Protected Mode."
::= { smPowerRestartEntry 7 }
smReset OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the case where the switch module is currently powered on, this command
will effectively power off and then power on the switch module indicated and
cause it to run its POST test. For the case where the switch module is
currently powered off, the command will just power on the switch module.
This MIB object can not be set, if MM grants switch module the Protected Mode
permission and switch module goes into Protected Mode.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { smPowerRestartEntry 8 }
smResetToDefault OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the case where the switch module is currently powered on, this command
will effectively power off and then power on the switch module indicated and
cause it to run its POST test. For the case where the switch module is
currently powered off, the command will just power on the switch module.
In both cases, the switch module will reset the configuration to the default
values.
This MIB object can not be set, if MM grants switch module the Protected Mode
permission and switch module goes into Protected Mode.
This MIB object can not be set, if the switch module is participating in the
Stacking Mode and reset to default is protected.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { smPowerRestartEntry 9 }
smRestartAndRunStdDiag OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To power cycle the selected module(s) and then run the standard diagnostic
test package.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { smPowerRestartEntry 10 }
smRestartAndRunExtDiag OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To power cycle the selected module(s) and then run the extended diagnostic
test package. This option is not supported on all I/O modules.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { smPowerRestartEntry 11 }
smRestartAndRunFullDiag OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To power cycle the selected module(s) and then run the full diagnostic test
package. The full diagnostic test package may take over 5 minutes to run.
This option is not supported on all I/O modules.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { smPowerRestartEntry 12 }
smPowerOnRestartDelay OBJECT-TYPE
SYNTAX INTEGER (0..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart delay (in seconds) when power is applied to a switch module."
::= { smPowerRestartEntry 15 }
smSwitchWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module width."
::= { smPowerRestartEntry 21 }
smManufacturingID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module hardware VPD manufacturing ID."
::= { smPowerRestartEntry 22 }
smStackingModeState OBJECT-TYPE
SYNTAX INTEGER {
standby(0),
member(1),
master(2),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Stacking Mode Status for the switch module.
standby - I/O module has stacking capability but is not part of a stack.
member - I/O module has stacking capability and is part of a stack in the
member role.
master - I/O module has stacking capability and is part of a stack in the
master role.
NOTE: The term disabled was changed to the term standby to be more descriptive."
::= { smPowerRestartEntry 23 }
smStackingModeInfo OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string containing a text description about the details of which functions are
protected for a switch module when it is in Stacking Mode as Master or Member.
The possible functions protected by switch modules are IP configuration,
External Port Access, External Management all over ports and Restore to defaults."
::= { smPowerRestartEntry 24 }
smIOCompatibilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmIOCompatibilityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module control table."
::= { switchModuleControl 10 }
smIOCompatibilityEntry OBJECT-TYPE
SYNTAX SmIOCompatibilityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module IO compatibility table entry"
INDEX { smIOCompatibilityIndex }
::= { smIOCompatibilityTable 1 }
SmIOCompatibilityEntry ::= SEQUENCE {
smIOCompatibilityIndex INTEGER,
smIOCompatibilityId INTEGER,
smIOCompatibilityModuleBay OCTET STRING,
smIOCompatibilityModulePower OCTET STRING,
smIOCompatibilityModuleFabricType OCTET STRING,
smIOCompatibilityStatus OCTET STRING,
smIOCompatibilityTargetTopologyPath OCTET STRING
}
smIOCompatibilityIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module IO compatibility index."
::= { smIOCompatibilityEntry 1 }
smIOCompatibilityId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4),
module5(5),
module6(6),
module7(7),
module8(8),
module9(9),
module10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module numeric identifier."
::= { smIOCompatibilityEntry 2 }
smIOCompatibilityModuleBay OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The modules (identified by an id string) that
this I/O module can communicate with over the midplane networking fabric
(i.e. a physical path exists between the I/O module and this module)."
::= { smIOCompatibilityEntry 3 }
smIOCompatibilityModulePower OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power state of the module specified in smIOCompatibilityModuleBay."
::= { smIOCompatibilityEntry 4 }
smIOCompatibilityModuleFabricType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The I/O fabric type on the module side for the module.
'n/a' will be displayed if the corresponding channel is not populated
on the module side (e.g. we are looking at the details for an Infiniband
switch but the blade does not have an Infiniband expansion card attached
in the corresponding expansion slot)."
::= { smIOCompatibilityEntry 5 }
smIOCompatibilityStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The compatibility status for this I/O module and the module specified
in smIOCompatibilityModuleBay.
The possible values are:
OK: No compatibility issues
n/a: Indicates the corresponding channel is not populated on the module
side even though the module is present (e.g. we are looking at the details
for an Infiniband switch but the blade specified in smIOCompatibilityModuleBay
does not have an Infiniband expansion card attached in the corresponding expansion slot).
Attention: Indicates one of the following:
The module specified in smIOCompatibilityModuleBay has a communication error.
The I/O module is powered off but the module specified in smIOCompatibilityModuleBay is powered on.
Mismatch: Indicates one of the following cases::
Fabric types are incompatible
Unknown fabric type on the module side
Unknown I/O module type"
::= { smIOCompatibilityEntry 6 }
smIOCompatibilityTargetTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component which communicates with this IO module. This is the
same component identified with an id string in the smIOCompatibilityModuleBay column.
The installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { smIOCompatibilityEntry 7 }
-- ********************************************************************************
-- Switch module config
-- ********************************************************************************
switchModuleConfig OBJECT IDENTIFIER ::= { switchModule 2 }
-- Server blade switch module configuration
switchMgmtNetworkCfg OBJECT IDENTIFIER ::= { switchModuleConfig 1 }
-- Server blade switch module management network config
--
-- Current switch module network config
--
switchCurrentNwCfg OBJECT IDENTIFIER ::= { switchMgmtNetworkCfg 1 }
-- Server blade switch module current network config
smCurrentIPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmCurrentIPInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module current IP information.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { switchCurrentNwCfg 1 }
smCurrentIPInfoEntry OBJECT-TYPE
SYNTAX SmCurrentIPInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module current IP table entry.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
INDEX { smCurrentIPInfoIndex }
::= { smCurrentIPInfoTable 1 }
SmCurrentIPInfoEntry ::= SEQUENCE {
smCurrentIPInfoIndex INTEGER,
smCurrentIPInfoId INTEGER,
smCurrentIPInfoExists INTEGER,
smCurrentIPInfoPowerState INTEGER,
smCurrentIPAddr IpAddress,
smCurrentSubnetMask IpAddress,
smCurrentGateway IpAddress,
smCurrentIPConfigMethod INTEGER
}
smCurrentIPInfoIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module current IP info index.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { smCurrentIPInfoEntry 1 }
smCurrentIPInfoId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4),
module5(5),
module6(6),
module7(7),
module8(8),
module9(9),
module10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module numeric identifier.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { smCurrentIPInfoEntry 2 }
smCurrentIPInfoExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the switch module specified exists or not.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { smCurrentIPInfoEntry 3 }
smCurrentIPInfoPowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
shutdownInProgress(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the I/O Module specified is powered on or not.
The value 'shutdownInProgress' is for the I/O Module that may take some time to
transition from 'poweron' to 'poweroff'.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { smCurrentIPInfoEntry 4 }
smCurrentIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module current IP address.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { smCurrentIPInfoEntry 6 }
smCurrentSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module current subnet mask.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { smCurrentIPInfoEntry 7 }
smCurrentGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module current IP gateway.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { smCurrentIPInfoEntry 8 }
smCurrentIPConfigMethod OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
static(1),
dhcp(2),
nat (3),
bootp(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module current IP configuration method.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected."
::= { smCurrentIPInfoEntry 9 }
-- ********************************************************************************
-- New switch module network config
-- ********************************************************************************
switchNewNwCfg OBJECT IDENTIFIER ::= { switchMgmtNetworkCfg 2 }
-- Server blade switch module new network config
smNewIPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmNewIPInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module new IP information.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
::= { switchNewNwCfg 1 }
smNewIPInfoEntry OBJECT-TYPE
SYNTAX SmNewIPInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module new IP configuration information table entry.
NOTE: This MIB table is not applicable to modules that are running in Network Address
Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
INDEX { smNewIPInfoIndex }
::= { smNewIPInfoTable 1 }
SmNewIPInfoEntry ::= SEQUENCE {
smNewIPInfoIndex INTEGER,
smNewIPInfoId INTEGER,
smNewIPInfoExists INTEGER,
smNewIPInfoPowerState INTEGER,
smNewIPAddr IpAddress,
smNewSubnetMask IpAddress,
smNewGateway IpAddress,
smNewIPConfigMethod INTEGER,
smNewIPConfigEnableDisable INTEGER
}
smNewIPInfoIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module new IP info index.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
::= { smNewIPInfoEntry 1 }
smNewIPInfoId OBJECT-TYPE
SYNTAX INTEGER {
module1(1),
module2(2),
module3(3),
module4(4),
module5(5),
module6(6),
module7(7),
module8(8),
module9(9),
module10(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module numeric identifier.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
::= { smNewIPInfoEntry 2 }
smNewIPInfoExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the switch module specified exists or not.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
::= { smNewIPInfoEntry 3 }
smNewIPInfoPowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the switch module specified is powered on or not.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode or Stacking Mode and IP configuration is protected.."
::= { smNewIPInfoEntry 4 }
smNewIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The switch module new IP address. Before setting this object to a new value,
smNewIpconfigEnableDisable object must first be set to disabled.
NOTE: This MIB object can not be set if the MM grants the switch module Protected Mode
permission and the switch module goes into Protected Mode.
NOTE: This MIB object can not be set if the switch module is in Stacking Mode
and IP Configuration is protected.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode."
::= { smNewIPInfoEntry 6 }
smNewSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The switch module new subnet mask. Before setting this object to a new value,
smNewIpconfigEnableDisable object must first be set to disabled.
NOTE: This MIB object can not be set if the MM grants the switch module Protected Mode
permission and the switch module goes into Protected Mode.
NOTE: This MIB object can not be set if the switch module is in Stacking Mode,
and IP Configuration is protected.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode."
::= { smNewIPInfoEntry 7 }
smNewGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The switch module new IP gateway. Before setting this object to a new value,
smNewIpconfigEnableDisable object must first be set to disabled.
NOTE: This MIB object can not be set if the MM grants the switch module Protected Mode
permission and the switch module goes into Protected Mode.
NOTE: This MIB object can not be set if the switch module is in Stacking Mode,
and IP Configuration is protected.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode."
::= { smNewIPInfoEntry 8 }
smNewIPConfigMethod OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
static(1),
dhcp(2),
nat(3),
bootp(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The switch module new IP configuration method. Before setting this object to a new value,
smNewIpconfigEnableDisable object must first be set to disabled.
NOTE: This MIB object can not be set if the MM grants the switch module Protected Mode
permission and the switch module goes into Protected Mode.
NOTE: This MIB object can not be set if the switch module is in Stacking Mode,
and IP Configuration is protected.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode."
::= { smNewIPInfoEntry 9 }
smNewIPConfigEnableDisable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A set command enables a new IP configuration that has been
previously defined. A get command indicates whether the new
IP configuration information has been enabled.
NOTE: This MIB object can not be set if the MM grants the switch module Protected Mode
permission and the switch module goes into Protected Mode.
NOTE: This MIB object can not be set if the switch module is in Stacking Mode,
and IP Configuration is protected.
NOTE: This MIB object is not applicable to modules that are running in Network Address
Translation (NAT) Mode."
::= { smNewIPInfoEntry 10 }
switchIPv6Config OBJECT IDENTIFIER ::= { switchMgmtNetworkCfg 4 }
smIPv6ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmIPv6ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of IPv6 configuration options for switch modules.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected.
NOTE: This MIB object is not applicable to modules that
do not support IPv6."
::= { switchIPv6Config 1 }
smIPv6ConfigEntry OBJECT-TYPE
SYNTAX SmIPv6ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPv6 configuration options for a switch module..
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected.
NOTE: This MIB object is not applicable to modules that
do not support IPv6."
INDEX { smIPv6ConfigIndex }
::= { smIPv6ConfigTable 1 }
SmIPv6ConfigEntry ::= SEQUENCE {
smIPv6ConfigIndex INTEGER,
smIPv6ConfigEnabled INTEGER,
smIPv6ConfigStatic INTEGER,
smDHCPv6ConfigEnabled INTEGER,
smIPv6ConfigStatelessEnabled INTEGER
}
smIPv6ConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module's slot number"
::= { smIPv6ConfigEntry 1 }
smIPv6ConfigEnabled OBJECT-TYPE
SYNTAX INTEGER { enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 support on the switch module."
::= { smIPv6ConfigEntry 2 }
smIPv6ConfigStatic OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 static configuration support on the switch module."
::= { smIPv6ConfigEntry 3 }
smDHCPv6ConfigEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables DHCPv6 address configuration support on the switch module."
::= { smIPv6ConfigEntry 4 }
smIPv6ConfigStatelessEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 stateless auto-configuration support on the switch module."
::= { smIPv6ConfigEntry 5 }
smIPv6AddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmIPv6AddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of assigned IPv6 addresses for switch modules.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected.
NOTE: This MIB object is not applicable to modules that
do not support IPv6."
::= { switchIPv6Config 2 }
smIPv6AddressEntry OBJECT-TYPE
SYNTAX SmIPv6AddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The assigned IPv6 address for a given switch module
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected.
NOTE: This MIB object is not applicable to modules that
do not support IPv6."
INDEX { smIPv6AddressIndex, smIPv6AddressEntryIndex}
::= { smIPv6AddressTable 1 }
SmIPv6AddressEntry ::= SEQUENCE {
smIPv6AddressIndex INTEGER,
smIPv6AddressEntryIndex INTEGER,
smIPv6AddressType INTEGER,
smIPv6Address InetAddressIPv6,
smIPv6AddressPrefixLen INTEGER,
smIPv6AddressDefaultRoute InetAddressIPv6
}
smIPv6AddressIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module's slot number"
::= { smIPv6AddressEntry 1 }
smIPv6AddressEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module's address entry index"
::= { smIPv6AddressEntry 2 }
smIPv6AddressType OBJECT-TYPE
SYNTAX INTEGER { static(1), dhcp6(2), link-local(3), autconfig(4), configured-static(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address type."
::= { smIPv6AddressEntry 3 }
smIPv6Address OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The assigned IPv6 address"
::= { smIPv6AddressEntry 4 }
smIPv6AddressPrefixLen OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The prefix length for the given address."
::= { smIPv6AddressEntry 5 }
smIPv6AddressDefaultRoute OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The default route used for the given address"
::= { smIPv6AddressEntry 6 }
smIPv6StaticConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmIPv6StaticConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Allows configuration of static IPv6 information for supported
IO modules.
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected.
NOTE: This MIB object is not applicable to modules that
do not support IPv6."
::= { switchIPv6Config 3 }
smIPv6StaticConfigEntry OBJECT-TYPE
SYNTAX SmIPv6StaticConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The static IP address assignment information for an
IO module. Once the assignement has taken place the address
will show up as a row in the smIPv6AddressTable
NOTE: This MIB object is not applicable to modules that are running in
Stacking Mode and IP configuration is protected.
NOTE: This MIB object is not applicable to modules that
do not support IPv6."
INDEX { smIPv6StaticIndex}
::= { smIPv6StaticConfigTable 1 }
SmIPv6StaticConfigEntry ::= SEQUENCE {
smIPv6StaticIndex INTEGER,
smIPv6StaticAddress InetAddressIPv6,
smIPv6StaticAddressPrefixLen INTEGER,
smIPv6StaticAddressDefaultRoute InetAddressIPv6
}
smIPv6StaticIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module's slot number"
::= { smIPv6StaticConfigEntry 1 }
smIPv6StaticAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The assigned IPv6 address.
NOTE: If changing with smIPv6StaticAddressPrefixLen and/or
smIPv6StaticAddressDefaultRoute sending the update as a
single SET command(in one PDU) will minimize the potential
downtime of the target switch.
NOTE: Sets on this object can take a few seconds. You may
need to update your SNMP timeout when modifying this setting."
::= { smIPv6StaticConfigEntry 2 }
smIPv6StaticAddressPrefixLen OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The prefix length for the given address.
NOTE: If changing with smIPv6StaticAddress and/or
smIPv6StaticAddressDefaultRoute sending the update as a
single SET command(in one PDU) will minimize the potential
downtime of the target switch.
NOTE: Sets on this object can take a few seconds. You may
need to update your SNMP timeout when modifying this setting."
::= { smIPv6StaticConfigEntry 3 }
smIPv6StaticAddressDefaultRoute OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default route used for the given address
NOTE: If changing with smIPv6StaticAddressPrefixLen and/or
smIPv6StaticAddress sending the update as a
single SET command(in one PDU) will minimize the potential
downtime of the target switch.
NOTE: Sets on this object can take a few seconds. You may
need to update your SNMP timeout when modifying this setting."
::= { smIPv6StaticConfigEntry 4 }
-- ********************************************************************************
-- Switch module port tables
-- ********************************************************************************
switchPortCfg OBJECT IDENTIFIER ::= { switchModuleConfig 2 }
switchModOnePortCfg OBJECT IDENTIFIER ::= { switchPortCfg 1 }
smOnePortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmOnePortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module 1 port configuration information.
NOTE: This option is not supported on all I/O modules."
::= { switchModOnePortCfg 1 }
smOnePortCfgEntry OBJECT-TYPE
SYNTAX SmOnePortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module 1 port configuration information table entry"
INDEX { smOnePortCfgIndex }
::= { smOnePortCfgTable 1 }
SmOnePortCfgEntry ::= SEQUENCE {
smOnePortCfgIndex INTEGER,
smOnePortCfgLabel OCTET STRING,
smOnePortCfgType INTEGER,
smOnePortCfgLinkSetting INTEGER,
smOnePortCfgLinkState INTEGER,
smOnePortCfgSpeedSetting OCTET STRING,
smOnePortCfgSpeedStatus OCTET STRING,
smOnePortCfgAvailSpeeds OCTET STRING,
smOnePortCfgMedia INTEGER,
smOnePortCfgProtocol INTEGER,
smOnePortCfgWidth INTEGER,
smOnePortCfgCableLength INTEGER,
smOnePortCfgCableType OCTET STRING,
smOnePortCfgVendorName OCTET STRING,
smOnePortCfgCompatibility INTEGER,
smOnePortCfgDataRate INTEGER
}
smOnePortCfgIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 1 port sequence index."
::= { smOnePortCfgEntry 1 }
smOnePortCfgLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 1 port label"
::= { smOnePortCfgEntry 2 }
smOnePortCfgType OBJECT-TYPE
SYNTAX INTEGER {
unused(0),
externalPort(1),
externalManagementPort(2),
externalDualPort(3),
bladePort(4),
mmManagementPort(5),
uplinkPort(6),
interModulePort(7),
interModuleManagementPort(8),
interModuleDualPort(9),
interModuleExternalBridgePort(10),
interModuleDualInternalBridgePort(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 1 port type:
External port: This port is connected to external device and is for data traffic.
External management port: This port is solely for external management connection.
This port is not used for data traffic from remote to blades.
External dual port: This external port is used for both data traffic to blades as well as for management.
Blade port: This port is connected to the blade.
Management Module Management port: This port is connected to the Management Module.
Uplink port: This port is configured for up link functionality.
Inter-Module port: This port is either by design connected to another I/O Module,
by user configured, or by MM setting the port type.
Inter-Module Management port: This port is connected to another I/O Module for management purpose.
The port type is either by design connected to another I/O Module, by user configured,
or by MM setting the port type.
Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
and management purposes. The port type is either by design connected to another I/O Module,
by user configured, or by MM setting the port type."
::= { smOnePortCfgEntry 3 }
smOnePortCfgLinkSetting OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Current port link setting for Switch Module 1."
::= { smOnePortCfgEntry 4 }
smOnePortCfgLinkState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
initialized(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current port link state of Switch Module 1."
::= { smOnePortCfgEntry 5 }
smOnePortCfgSpeedSetting OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the port speed using the data rate and duplex value. For examples:
100mh: 100 Mbps in Half Duplex;
10gf: 10 Gbps in Full Duplex;
auto: The working speed of the physical port can be tuned automatically.
NOTE: Only the speeds from smOnePortCfgAvailSpeeds object are applicable to setting
this mib object."
::= { smOnePortCfgEntry 6 }
smOnePortCfgSpeedStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current port speed of Switch Module 1."
::= { smOnePortCfgEntry 7 }
smOnePortCfgAvailSpeeds OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Available speed setting per port for Switch Module 1.
If there is more than one setting, the speeds are separated by a comma and then a space."
::= { smOnePortCfgEntry 8 }
smOnePortCfgMedia OBJECT-TYPE
SYNTAX INTEGER {
copper(0),
serdes(1),
opticalShortHaul(32),
opticalLongHaul(48),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port media type of Switch Module 1."
::= { smOnePortCfgEntry 9 }
smOnePortCfgProtocol OBJECT-TYPE
SYNTAX INTEGER {
ethernet(16),
fibreChannel(32),
scalability(48),
infiniband(64),
pciExpress(80),
myrinet(112),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port protocol of Switch Module 1."
::= { smOnePortCfgEntry 10 }
smOnePortCfgWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The width of the port in terms of how many combined cables are present for Switch Module 1.
A value of 0 indicates this field is not applicable to the switch ports.
This data is also known as the lane count."
::= { smOnePortCfgEntry 11 }
smOnePortCfgCableLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The length (in meters) of the cable supported by this port for Switch Module 1.
A value of 0 indicates this field is not applicable to the switch ports."
::= { smOnePortCfgEntry 12 }
smOnePortCfgCableType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"External cable type for this port, for example, active copper or passive fiber."
::= { smOnePortCfgEntry 13 }
smOnePortCfgVendorName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cable manufacturer."
::= { smOnePortCfgEntry 14 }
smOnePortCfgCompatibility OBJECT-TYPE
SYNTAX INTEGER {
incompatible(0),
compatible(1),
compatibleNotRecommended(2),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compatibility of the external cable that is plugged into the port."
::= { smOnePortCfgEntry 15 }
smOnePortCfgDataRate OBJECT-TYPE
SYNTAX INTEGER {
sdr(0),
ddr(1),
qdr(2),
edr(3),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data rate supported for this port."
::= { smOnePortCfgEntry 16 }
switchModTwoPortCfg OBJECT IDENTIFIER ::= { switchPortCfg 2 }
smTwoPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmTwoPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module 2 port configuration information.
Note: This option is not supported on all I/O modules."
::= { switchModTwoPortCfg 1 }
smTwoPortCfgEntry OBJECT-TYPE
SYNTAX SmTwoPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module 2 port configuration information table entry"
INDEX { smTwoPortCfgIndex }
::= { smTwoPortCfgTable 1 }
SmTwoPortCfgEntry ::= SEQUENCE {
smTwoPortCfgIndex INTEGER,
smTwoPortCfgLabel OCTET STRING,
smTwoPortCfgType INTEGER,
smTwoPortCfgLinkSetting INTEGER,
smTwoPortCfgLinkState INTEGER,
smTwoPortCfgSpeedSetting OCTET STRING,
smTwoPortCfgSpeedStatus OCTET STRING,
smTwoPortCfgAvailSpeeds OCTET STRING,
smTwoPortCfgMedia INTEGER,
smTwoPortCfgProtocol INTEGER,
smTwoPortCfgWidth INTEGER,
smTwoPortCfgCableLength INTEGER,
smTwoPortCfgCableType OCTET STRING,
smTwoPortCfgVendorName OCTET STRING,
smTwoPortCfgCompatibility INTEGER,
smTwoPortCfgDataRate INTEGER
}
smTwoPortCfgIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 2 port sequence index."
::= { smTwoPortCfgEntry 1 }
smTwoPortCfgLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 2 port label"
::= { smTwoPortCfgEntry 2 }
smTwoPortCfgType OBJECT-TYPE
SYNTAX INTEGER {
unused(0),
externalPort(1),
externalManagementPort(2),
externalDualPort(3),
bladePort(4),
mmManagementPort(5),
uplinkPort(6),
interModulePort(7),
interModuleManagementPort(8),
interModuleDualPort(9),
interModuleExternalBridgePort(10),
interModuleDualInternalBridgePort(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 2 port type:
External port: This port is connected to external device and is for data traffic.
External management port: This port is solely for external management connection.
This port is not used for data traffic from remote to blades.
External dual port: This external port is used for both data traffic to blades as well as for management.
Blade port: This port is connected to the blade.
Management Module Management port: This port is connected to the Management Module.
Uplink port: This port is configured for up link functionality.
Inter-Module port: This port is either by design connected to another I/O Module,
by user configured, or by MM setting the port type.
Inter-Module Management port: This port is connected to another I/O Module for management purpose.
The port type is either by design connected to another I/O Module, by user configured,
or by MM setting the port type.
Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
and management purposes. The port type is either by design connected to another I/O Module,
by user configured, or by MM setting the port type."
::= { smTwoPortCfgEntry 3 }
smTwoPortCfgLinkSetting OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Current port link setting for Switch Module 2."
::= { smTwoPortCfgEntry 4 }
smTwoPortCfgLinkState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
initialized(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current port link state of Switch Module 2."
::= { smTwoPortCfgEntry 5 }
smTwoPortCfgSpeedSetting OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the port speed using the data rate and duplex value. For examples:
100mf: 100Mbps in Half Duplex;
10gf: 10 Gbps in Full Duplex;
auto: The working speed of the physical port can be tuned automatically.
NOTE: Only the speeds from smTwoPortCfgAvailSpeeds are applicable to setting
this mib object."
::= { smTwoPortCfgEntry 6 }
smTwoPortCfgSpeedStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current port speed of Switch Module 2."
::= { smTwoPortCfgEntry 7 }
smTwoPortCfgAvailSpeeds OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Available speed setting per port for Switch Module 2.
If there is more than one setting, the speeds are separated by a comma and then a space."
::= { smTwoPortCfgEntry 8 }
smTwoPortCfgMedia OBJECT-TYPE
SYNTAX INTEGER {
copper(0),
serdes(1),
opticalShortHaul(32),
opticalLongHaul(48),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port media type of Switch Module 2."
::= { smTwoPortCfgEntry 9 }
smTwoPortCfgProtocol OBJECT-TYPE
SYNTAX INTEGER {
ethernet(16),
fibreChannel(32),
scalability(48),
infiniband(64),
pciExpress(80),
myrinet(112),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port protocol of Switch Module 2."
::= { smTwoPortCfgEntry 10 }
smTwoPortCfgWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The width of the port in terms of how many combined cables are present for Switch Module 2.
A value of 0 indicates this field is not applicable to the switch ports.
This data is also known as the lane count."
::= { smTwoPortCfgEntry 11 }
smTwoPortCfgCableLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The length (in meters) of the cable supported by this port for Switch Module 2.
A value of 0 indicates this field is not applicable to the switch ports."
::= { smTwoPortCfgEntry 12 }
smTwoPortCfgCableType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"External cable type for this port, for example, active copper or passive fiber."
::= { smTwoPortCfgEntry 13 }
smTwoPortCfgVendorName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cable manufacturer."
::= { smTwoPortCfgEntry 14 }
smTwoPortCfgCompatibility OBJECT-TYPE
SYNTAX INTEGER {
incompatible(0),
compatible(1),
compatibleNotRecommended(2),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compatibility of the external cable that is plugged into the port."
::= { smTwoPortCfgEntry 15 }
smTwoPortCfgDataRate OBJECT-TYPE
SYNTAX INTEGER {
sdr(0),
ddr(1),
qdr(2),
edr(3),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data rate supported for this port."
::= { smTwoPortCfgEntry 16 }
switchModThreePortCfg OBJECT IDENTIFIER ::= { switchPortCfg 3 }
smThreePortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmThreePortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module 3 port configuration information.
Note: This option is not supported on all I/O modules."
::= { switchModThreePortCfg 1 }
smThreePortCfgEntry OBJECT-TYPE
SYNTAX SmThreePortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module 3 port configuration information table entry"
INDEX { smThreePortCfgIndex }
::= { smThreePortCfgTable 1 }
SmThreePortCfgEntry ::= SEQUENCE {
smThreePortCfgIndex INTEGER,
smThreePortCfgLabel OCTET STRING,
smThreePortCfgType INTEGER,
smThreePortCfgLinkSetting INTEGER,
smThreePortCfgLinkState INTEGER,
smThreePortCfgSpeedSetting OCTET STRING,
smThreePortCfgSpeedStatus OCTET STRING,
smThreePortCfgAvailSpeeds OCTET STRING,
smThreePortCfgMedia INTEGER,
smThreePortCfgProtocol INTEGER,
smThreePortCfgWidth INTEGER,
smThreePortCfgCableLength INTEGER,
smThreePortCfgCableType OCTET STRING,
smThreePortCfgVendorName OCTET STRING,
smThreePortCfgCompatibility INTEGER,
smThreePortCfgDataRate INTEGER
}
smThreePortCfgIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 3 port sequence index."
::= { smThreePortCfgEntry 1 }
smThreePortCfgLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 3 port label"
::= { smThreePortCfgEntry 2 }
smThreePortCfgType OBJECT-TYPE
SYNTAX INTEGER {
unused(0),
externalPort(1),
externalManagementPort(2),
externalDualPort(3),
bladePort(4),
mmManagementPort(5),
uplinkPort(6),
interModulePort(7),
interModuleManagementPort(8),
interModuleDualPort(9),
interModuleExternalBridgePort(10),
interModuleDualInternalBridgePort(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 3 port type:
External port: This port is connected to external device and is for data traffic.
External management port: This port is solely for external management connection.
This port is not used for data traffic from remote to blades.
External dual port: This external port is used for both data traffic to blades as well as for management.
Blade port: This port is connected to the blade.
Management Module Management port: This port is connected to the Management Module.
Uplink port: This port is configured for up link functionality.
Inter-Module port: This port is either by design connected to another I/O Module,
by user configured, or by MM setting the port type.
Inter-Module Management port: This port is connected to another I/O Module for management purpose.
The port type is either by design connected to another I/O Module, by user configured,
or by MM setting the port type.
Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
and management purposes. The port type is either by design connected to another I/O Module,
by user configured, or by MM setting the port type."
::= { smThreePortCfgEntry 3 }
smThreePortCfgLinkSetting OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Current port link setting for Switch Module 3."
::= { smThreePortCfgEntry 4 }
smThreePortCfgLinkState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
initialized(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current port link state of Switch Module 3."
::= { smThreePortCfgEntry 5 }
smThreePortCfgSpeedSetting OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the port speed using the data rate and duplex value. For examples:
100mf: 100Mbps in Half Duplex;
10gf: 10 Gbps in Full Duplex;
auto: The working speed of the physical port can be tuned automatically.
NOTE: Only the speeds from smThreePortCfgAvailSpeeds are applicable to setting
this mib object."
::= { smThreePortCfgEntry 6 }
smThreePortCfgSpeedStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current port speed of Switch Module 3."
::= { smThreePortCfgEntry 7 }
smThreePortCfgAvailSpeeds OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Available speed setting per port for Switch Module 3.
If there is more than one setting, the speeds are separated by a comma and then a space."
::= { smThreePortCfgEntry 8 }
smThreePortCfgMedia OBJECT-TYPE
SYNTAX INTEGER {
copper(0),
serdes(1),
opticalShortHaul(32),
opticalLongHaul(48),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port media type of Switch Module 3."
::= { smThreePortCfgEntry 9 }
smThreePortCfgProtocol OBJECT-TYPE
SYNTAX INTEGER {
ethernet(16),
fibreChannel(32),
scalability(48),
infiniband(64),
pciExpress(80),
myrinet(112),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port protocol of Switch Module 3."
::= { smThreePortCfgEntry 10 }
smThreePortCfgWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The width of the port in terms of how many combined cables are present for Switch Module 3.
A value of 0 indicates this field is not applicable to the switch ports.
This data is also known as the lane count."
::= { smThreePortCfgEntry 11 }
smThreePortCfgCableLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The length (in meters) of the cable supported by this port for Switch Module 3.
A value of 0 indicates this field is not applicable to the switch ports."
::= { smThreePortCfgEntry 12 }
smThreePortCfgCableType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"External cable type for this port, for example, active copper or passive fiber."
::= { smThreePortCfgEntry 13 }
smThreePortCfgVendorName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cable manufacturer."
::= { smThreePortCfgEntry 14 }
smThreePortCfgCompatibility OBJECT-TYPE
SYNTAX INTEGER {
incompatible(0),
compatible(1),
compatibleNotRecommended(2),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compatibility of the external cable that is plugged into the port."
::= { smThreePortCfgEntry 15 }
smThreePortCfgDataRate OBJECT-TYPE
SYNTAX INTEGER {
sdr(0),
ddr(1),
qdr(2),
edr(3),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data rate supported for this port."
::= { smThreePortCfgEntry 16 }
switchModFourPortCfg OBJECT IDENTIFIER ::= { switchPortCfg 4 }
smFourPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmFourPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module 4 port configuration information.
Note: This option is not supported on all I/O modules."
::= { switchModFourPortCfg 1 }
smFourPortCfgEntry OBJECT-TYPE
SYNTAX SmFourPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module 4 port configuration information table entry"
INDEX { smFourPortCfgIndex }
::= { smFourPortCfgTable 1 }
SmFourPortCfgEntry ::= SEQUENCE {
smFourPortCfgIndex INTEGER,
smFourPortCfgLabel OCTET STRING,
smFourPortCfgType INTEGER,
smFourPortCfgLinkSetting INTEGER,
smFourPortCfgLinkState INTEGER,
smFourPortCfgSpeedSetting OCTET STRING,
smFourPortCfgSpeedStatus OCTET STRING,
smFourPortCfgAvailSpeeds OCTET STRING,
smFourPortCfgMedia INTEGER,
smFourPortCfgProtocol INTEGER,
smFourPortCfgWidth INTEGER,
smFourPortCfgCableLength INTEGER,
smFourPortCfgCableType OCTET STRING,
smFourPortCfgVendorName OCTET STRING,
smFourPortCfgCompatibility INTEGER,
smFourPortCfgDataRate INTEGER
}
smFourPortCfgIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 4 port sequence index."
::= { smFourPortCfgEntry 1 }
smFourPortCfgLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 4 port label"
::= { smFourPortCfgEntry 2 }
smFourPortCfgType OBJECT-TYPE
SYNTAX INTEGER {
unused(0),
externalPort(1),
externalManagementPort(2),
externalDualPort(3),
bladePort(4),
mmManagementPort(5),
uplinkPort(6),
interModulePort(7),
interModuleManagementPort(8),
interModuleDualPort(9),
interModuleExternalBridgePort(10),
interModuleDualInternalBridgePort(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module 4 port type:
External port: This port is connected to external device and is for data traffic.
External management port: This port is solely for external management connection.
This port is not used for data traffic from remote to blades.
External dual port: This external port is used for both data traffic to blades as well as for management.
Blade port: This port is connected to the blade.
Management Module Management port: This port is connected to the Management Module.
Uplink port: This port is configured for up link functionality.
Inter-Module port: This port is either by design connected to another I/O Module,
by user configured, or by MM setting the port type.
Inter-Module Management port: This port is connected to another I/O Module for management purpose.
The port type is either by design connected to another I/O Module, by user configured,
or by MM setting the port type.
Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
and management purposes. The port type is either by design connected to another I/O Module,
by user configured, or by MM setting the port type."
::= { smFourPortCfgEntry 3 }
smFourPortCfgLinkSetting OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Current port link setting for Switch Module 4."
::= { smFourPortCfgEntry 4 }
smFourPortCfgLinkState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
initialized(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current port link state of Switch Module 4."
::= { smFourPortCfgEntry 5 }
smFourPortCfgSpeedSetting OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the port speed using the data rate and duplex value. For examples:
100mf: 100Mbps in Half Duplex;
10gf: 10 Gbps in Full Duplex;
auto: The working speed of the physical port can be tuned automatically.
NOTE: Only the speeds from smFourPortCfgAvailSpeeds are applicable to setting
this mib object."
::= { smFourPortCfgEntry 6 }
smFourPortCfgSpeedStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current port speed of Switch Module 4."
::= { smFourPortCfgEntry 7 }
smFourPortCfgAvailSpeeds OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Available speed setting per port for Switch Module 4.
If there is more than one setting, the speeds are separated by a comma and then a space."
::= { smFourPortCfgEntry 8 }
smFourPortCfgMedia OBJECT-TYPE
SYNTAX INTEGER {
copper(0),
serdes(1),
opticalShortHaul(32),
opticalLongHaul(48),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port media type of Switch Module 4."
::= { smFourPortCfgEntry 9 }
smFourPortCfgProtocol OBJECT-TYPE
SYNTAX INTEGER {
ethernet(16),
fibreChannel(32),
scalability(48),
infiniband(64),
pciExpress(80),
myrinet(112),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port protocol of Switch Module 4."
::= { smFourPortCfgEntry 10 }
smFourPortCfgWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The width of the port in terms of how many combined cables are present for Switch Module 4.
A value of 0 indicates this field is not applicable to the switch ports.
This data is also known as the lane count."
::= { smFourPortCfgEntry 11 }
smFourPortCfgCableLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The length (in meters) of the cable supported by this port for Switch Module 4.
A value of 0 indicates this field is not applicable to the switch ports."
::= { smFourPortCfgEntry 12 }
smFourPortCfgCableType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"External cable type for this port, for example, active copper or passive fiber."
::= { smFourPortCfgEntry 13 }
smFourPortCfgVendorName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cable manufacturer."
::= { smFourPortCfgEntry 14 }
smFourPortCfgCompatibility OBJECT-TYPE
SYNTAX INTEGER {
incompatible(0),
compatible(1),
compatibleNotRecommended(2),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Compatibility of the external cable that is plugged into the port."
::= { smFourPortCfgEntry 15 }
smFourPortCfgDataRate OBJECT-TYPE
SYNTAX INTEGER {
sdr(0),
ddr(1),
qdr(2),
edr(3),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data rate supported for this port."
::= { smFourPortCfgEntry 16 }
chassisTopology OBJECT IDENTIFIER ::= { components 4 }
chassisResponseVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis response version."
::= { chassisTopology 1 }
chassisFlags OBJECT-TYPE
SYNTAX INTEGER {
rackOrStandAlone(0),
serverBlade(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis flags.
1 = a server blade chassis, 0 = a rack or standalone chassis."
::= { chassisTopology 2 }
chassisNoOfFPsSupported OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object is deprecated because the power modules'
fan packs are integrated into the power modules and are not
removable as on previous power modules.
Number of fan packs (FPs) supported.
NOTE: Fan packs are also referred to as Power Module Cooling Devices."
::= { chassisTopology 18 }
chassisNoOfBayDevicesSupported OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of bays found in the chassis."
::= { chassisTopology 19 }
chassisNoOfSMsSupported OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of switch modules (SMs) supported."
::= { chassisTopology 20 }
chassisNoOfMMsSupported OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of management modules (MMs) supported."
::= { chassisTopology 21 }
chassisNoOfPMsSupported OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of power modules (PMs) supported."
::= { chassisTopology 22 }
chassisNoOfRearLEDCardsSupported OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of rear LED cards supported."
::= { chassisTopology 23 }
chassisNoOfChassisFansSupported OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of chassis fans supported."
::= { chassisTopology 24 }
chassisBayDevicesInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bay devices that are installed in the chassis.
The bay devices are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of bay devices supported. For devices that fill
multiple bays, the bit mask will indicate the
primary/lowest bay as occupied. If a device is installed in a
bay, a 1 is present in the string in the position representing
the bay ID as read from left to right. For example, if devices
are installed in bays 1, 5, and 13, and 14 bays are supported,
the string would look like '10001000000010'."
::= { chassisTopology 25 }
chassisSMsInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch modules that are installed on the chassis.
The switch modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of switch modules supported. If a switch module is
installed in a bay, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if switch modules are installed in bays 1 and 3, and 4 switch modules
are supported, the string would look like '1011'."
::= { chassisTopology 29 }
chassisMMsInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The management modules that are installed on the chassis.
The management modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as the
number of management modules supported. If a management module is installed
in a bay, a 1 is present in the string in the position representing
the bay ID as read from left to right. For example, if a management module
is installed in bay 1, and 2 management modules are supported, the
string would look like '10'."
::= { chassisTopology 30 }
chassisPMsInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power modules that are installed on the chassis.
The power modules are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of power modules supported. If a power module is
installed in a bay, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if power modules are installed in bays 1 and 3, and 4 power modules
are supported, the string would look like '1010'."
::= { chassisTopology 31 }
chassisRearLEDCardInstalled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether at least one rear LED card is installed."
::= { chassisTopology 32 }
chassisFansInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The chassis fans that are installed on the chassis.
They are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of supported. If it is installed in a
bay, a 1 is present in the string in the position representing
the bay ID as read from left to right. For example, if it
is installed in bay 1, and 2 are supported, the string
would look like '10'."
::= { chassisTopology 33 }
chassisActiveMM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The active management module (MM)."
::= { chassisTopology 34 }
chassisFPsInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object is deprecated because the power modules'
fan packs are integrated into the power modules and are not
removable as on previous power modules.
The fan packs that are installed on the chassis.
The fan packs are listed as a bitmap. The bitmap is a
string containing a list of 1's and 0's that is as long as
the number of fan packs supported. If a fan pack is
installed in a bay, a 1 is present in the string in the position
representing the bay ID as read from left to right. For example,
if fan packs are installed in bays 1 and 3, and 4 fan packs
are supported, the string would look like '1010'.
NOTE: Fan packs are also referred to as Power Module Cooling Devices."
::= { chassisTopology 37 }
chassisType OBJECT-TYPE
SYNTAX INTEGER {
flex(101)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the chassis.
This MIB object should be used in conjunction
with chassisSubType MIB object to determine the characteristic of the chassis."
::= { chassisTopology 38 }
chassisSubtype OBJECT-TYPE
SYNTAX INTEGER {
flex(101),
tracewell4(48),
tracewell8(49),
tracewell7(50),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subtype of the chassis. This MIB object should be used in conjunction with
chassisType MIB object to determine the characteristic of the chassis."
::= { chassisTopology 39 }
chassisNoOfRearLEDCardsInstalled OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rear LED cards that are installed on the chassis."
::= { chassisTopology 52 }
chassisRoom OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..24))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the room where the chassis is located.
Maximum 23 characters for name plus NULL termination."
::= { chassisTopology 53 }
chassisName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the chassis.
Maximum 15 character long plus NULL termination."
::= { chassisTopology 54 }
chassisRack OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..24))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the room where the chassis is located.
Maximum 23 characters for name plus NULL termination."
::= { chassisTopology 55}
chassisLowestU OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The lowest U position that is occupied in the rack."
::= { chassisTopology 56}
chassisUHeight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The height of the chassis in 'U' units."
::= { chassisTopology 57}
-- ********************************************************************************
managementModule OBJECT IDENTIFIER ::= { components 5 }
-- ********************************************************************************
mmStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MmStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of the management module status."
::= { managementModule 1 }
mmStatusEntry OBJECT-TYPE
SYNTAX MmStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Management module status entry."
INDEX { mmStatusIndex }
::= { mmStatusTable 1 }
MmStatusEntry ::= SEQUENCE {
mmStatusIndex INTEGER,
mmPresent INTEGER,
mmExtIpAddress IpAddress,
mmPrimary INTEGER,
mmHealthState INTEGER
}
mmStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module status index."
::= { mmStatusEntry 1 }
mmPresent OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module current status."
::= { mmStatusEntry 2 }
mmExtIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module external IP address.
NOTE: The IPv6 addresses assigned to the MM may be viewed
with the extEthernetInterfaceIPv6 objects"
::= { mmStatusEntry 3 }
mmPrimary OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if this Management module is a primary or not.
NOTE: If there is no standby MM, this value defaults to primary."
::= { mmStatusEntry 4 }
mmHealthState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
bad(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The health state for the management module.
0 = unknown, 1 = good, 2 = warning, 3 = bad."
::= { mmStatusEntry 5 }
-- ********************************************************************************
-- IOM firmware image information
-- ********************************************************************************
firmwareInformation OBJECT IDENTIFIER ::= { components 8 }
smFirmwareInformation OBJECT IDENTIFIER ::= { firmwareInformation 1 }
smFirmwareInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmFirmwareInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module firmware image information."
::= { smFirmwareInformation 1 }
smFirmwareInfoEntry OBJECT-TYPE
SYNTAX SmFirmwareInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch Module firmware image information table entry"
INDEX { smFirmwareInfoIndex }
::= { smFirmwareInfoTable 1 }
SmFirmwareInfoEntry ::= SEQUENCE {
smFirmwareInfoIndex INTEGER,
smFirmwareInfoModIndex INTEGER,
smFirmwareInfoImageIndex INTEGER,
smFirmwareInfoImageName OCTET STRING
}
smFirmwareInfoIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sequence index in the firmware table."
::= { smFirmwareInfoEntry 1 }
smFirmwareInfoModIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module number."
::= { smFirmwareInfoEntry 2 }
smFirmwareInfoImageIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch Module firmware image index."
::= { smFirmwareInfoEntry 3 }
smFirmwareInfoImageName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Switch Module firmware image name"
::= { smFirmwareInfoEntry 4 }
-- ********************************************************************************
-- Firmware update for MM, Switch modules, and blades
-- ********************************************************************************
firmwareUpdate OBJECT IDENTIFIER ::= { components 9 }
firmwareUpdateTarget OBJECT-TYPE
SYNTAX INTEGER {
managementModule(0),
switchModule1(11),
switchModule2(12),
switchModule3(13),
switchModule4(14),
unknown(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Target module whose firmware will be updated.
NOTE: Some switch modules do not allow firmware update.
When firmware update is attempted on those switch modules,
the agent will report an error."
::= { firmwareUpdate 1 }
firmwareUpdateTftpServer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If flashing via the legacy method using a tftp server, then
set the IP address or host name of the TFTP server where
the firmware file resides. The address must be entered in a
dotted decimal IP string (e.g. 9.37.44.2).
NOTE: IPv6 numeric addresses must be enclosed with brackets
(e.g. [fe80::5652:ff:fe50:53b6])."
::= { firmwareUpdate 2 }
firmwareUpdateFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..254))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"File name of the firmware file."
::= { firmwareUpdate 3 }
firmwareUpdateStart OBJECT-TYPE
SYNTAX INTEGER {
execute(1),
execute-with-reboot(2),
execute-nowait(3),
execute-with-reboot-nowait(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Start updating the firmware of the specified target module.
Using execute or execute-with-reboot will cause the SNMP client to
wait for the firmware update to complete.
Using execute-nowait or execute-with-reboot-nowait will not cause
the SNMP client to wait for the update to complete. Instead it will
flash the firmware in the background.
Note 1: If the execute-with-reboot or execute-with-reboot-nowait
option is selected, the target will reset after a successful flash.
This option is only valid if the firmwareUpdateTarget object is
set to managementModule.
Note 2: If flashing from a remote file, then both
firmwareUpdateServer and firmwareUpdateFileName must be
set. Otherwise if flashing via the legacy method using a tftp
server, then both firmwareUpdateTftpServer and
firmwareUpdateFileName must be set.
Note 3: Depending on the target, it might take up to several
minutes for the flash update to complete. Do not reset the
target until the control has been returned. At this point,
the results will be displayed.
Note 4: Use firmwareUpdateStatus to confirm the status of
the last firmware update initiated by SNMP method. The
Management Module must be restarted for the new firmware to
take affect.
Note 5: If data encryption is currently enabled on this MM,
and you update the MM firmware to a level which does not
support data encryption, you will lose all your configuration
settings as a result.
Note 6: Since some I/O Module types use the MM TFTP server for
firmware file transfer during the firmware update process, the
tftpEnable MIB object must be set to enable prior to updating
the firmware for these modules.
Note 7: If IPv6 address(es) have been configured for one or more
interfaces/protocols/services on this MM, when you update
the firmware to a level which does not support IPv6, all IPv6
connectivity will be lost, and services/interfaces for which an IPv6
address was configured may not function properly. You will be required
to reconfigure these services/interfaces.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { firmwareUpdate 4 }
firmwareUpdateStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Get the status of the last firmware update which was
initiated through SNMP method."
::= { firmwareUpdate 5 }
standbyFirmwareUpdateStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Get the current status of the firmware update for the standby MM.
NOTE: This only applies to systems with a standby MM."
::= { firmwareUpdate 6 }
firmwareImageNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the module can upload more than one image, an image
number must be specified after setting the firmware target.
Please refer to the firmwareInformation section."
::= { firmwareUpdate 7 }
firmwareActiveImage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the module can upload more than one image, an active image
number must be specified. Please refer to the firmwareInformation section.
NOTE: Value returned for the GET command is meaningless for this
MIB object."
::= { firmwareUpdate 8 }
firmwareUpdateServer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..254))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the fully qualified remote location of the firmware
packet file. Use firmwareUpdateFileName to specify the filename.
A fully qualified remote location contains a supported
protocol followed by a colon and two slashes (//), userid and
password separated by a colon for login authentication, an
@ sign, followed by the hostname or IP address of the
server where the packet file resides, followed by an optional
port number to the hostname, and the full pathname to the file.
Note that if the port number is specified, it must be
separated with the hostname (or IP address) by a colon.
The MM currently supports the following protocols:
TFTP, FTP, HTTP and HTTPS.
The complete format of a fully qualified remote location is:
<protocol>://<userid:password>@<hostname:port>/<pathname>
An example of a fully qualified remote location can be:
ftp://USERID:PASSW0RD@192.168.0.2:30045/tmp
where the ftp protocol will be used for transferring the file in
this location, username is USERID, password is
PASSW0RD, host IP address is 192.168.0.2, port number is
30045, and the full pathname for the packet file is /tmp.
and firmwareUpdateFileName is set to: cmefs.uxp
Some protocols do not need the username, password, and
the port number, so the minimum requirement for a fully
qualified location can be: <protocol>://<hostname>/<pathname>.
Note: When updating certain switches via SFTP, only an RSA fingerprint
is supported. Please see your switch documentation for more information."
::= { firmwareUpdate 9 }
-- ********************************************************************************
-- Local file management
-- ********************************************************************************
fileManagement OBJECT IDENTIFIER ::= { components 11 }
fileTopology OBJECT IDENTIFIER ::= { fileManagement 1 }
currentDirectory OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the directory name for listing the requested files."
::= { fileTopology 1 }
fileDetailsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of all the files in the specified directory."
::= { fileTopology 2 }
fileDetailsEntry OBJECT-TYPE
SYNTAX FileDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"File details entry."
INDEX { fileIndex }
::= { fileDetailsTable 1 }
FileDetailsEntry ::= SEQUENCE {
fileIndex INTEGER,
fileName OCTET STRING,
fileLastUpdate OCTET STRING,
fileSize OCTET STRING
}
fileIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"File sequence index."
::= { fileDetailsEntry 1 }
fileName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"File name."
::= { fileDetailsEntry 2 }
fileLastUpdate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date of the latest file update."
::= { fileDetailsEntry 3 }
fileSize OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"File size in bytes."
::= { fileDetailsEntry 4 }
fileManagementCmd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field will execute the selected operations on the files.
The following operation is supported:
DEL name - delete a file
Examples:
- to delete the file named switch.config in tftproot directory
set the value to 'DEL tftproot/switch.config'
NOTE: Value returned for the GET command is meaningless for this
MIB object."
::= { fileManagement 3 }
fileSystemSpaceAvailable OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field displays the available space of the MM file system."
::= { fileManagement 6 }
-- ********************************************************************************
-- Chassis discovery
-- ********************************************************************************
cmeRemoteChassis OBJECT IDENTIFIER ::= { components 12 }
cmeRemoteChassisTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmeRemoteChassisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is used to provide the discovered MMs based on the new,
extended SLP response information."
::= { cmeRemoteChassis 1 }
cmeRemoteChassisEntry OBJECT-TYPE
SYNTAX CmeRemoteChassisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Remote chassis entry"
INDEX { cmeRemoteChassisIndex }
::= { cmeRemoteChassisTable 1 }
CmeRemoteChassisEntry ::= SEQUENCE {
cmeRemoteChassisIndex INTEGER,
cmeSystemName OCTET STRING,
cmeType OCTET STRING,
cmeSerial OCTET STRING,
cmeFru OCTET STRING,
cmeUuid OCTET STRING,
cmeSlot OCTET STRING,
cmeMidPid OCTET STRING,
cmeMacAddress OCTET STRING,
cmeChassisSerial OCTET STRING,
cmeChassisFru OCTET STRING,
cmeChassisMachineTypeMode OCTET STRING,
cmeSystemStatus INTEGER,
cmeChassisUuid OCTET STRING,
cmeChassisMidPid OCTET STRING,
cmeChassisId OCTET STRING,
cmeChassisLocation OCTET STRING,
cmeChassisRoomId OCTET STRING,
cmeChassisRackId OCTET STRING,
cmeChassisUser OCTET STRING,
cmeChassisFruList OCTET STRING,
cmeFirmwareVersion OCTET STRING,
cmeChassisType OCTET STRING,
cmeIpv4Status INTEGER,
cmeIpv4Addresses OCTET STRING,
cmeIpv4AddressesFloat OCTET STRING,
cmeIpv4Protocols OCTET STRING,
cmeIpv6Status INTEGER,
cmeIpv6Addresses OCTET STRING,
cmeIpv6AddressesFloat OCTET STRING,
cmeIpv6Protocols OCTET STRING
}
cmeRemoteChassisIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote chassis discovery sequence index."
::= { cmeRemoteChassisEntry 1 }
cmeSystemName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System name for this discovery management module."
::= { cmeRemoteChassisEntry 2 }
cmeType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module service processor type."
::= { cmeRemoteChassisEntry 3}
cmeSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module serial number."
::= { cmeRemoteChassisEntry 4 }
cmeFru OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module Field-Replaceable number."
::= { cmeRemoteChassisEntry 5 }
cmeUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module UUID."
::= { cmeRemoteChassisEntry 6}
cmeSlot OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module slot."
::= { cmeRemoteChassisEntry 7}
cmeMidPid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module Mid-plane Pid."
::= { cmeRemoteChassisEntry 8}
cmeMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module MAC address."
::= { cmeRemoteChassisEntry 9}
cmeChassisSerial OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis serial number."
::= { cmeRemoteChassisEntry 10 }
cmeChassisFru OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis Field-Replaceable number."
::= { cmeRemoteChassisEntry 11 }
cmeChassisMachineTypeMode OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis machine type and model number."
::= { cmeRemoteChassisEntry 12 }
cmeSystemStatus OBJECT-TYPE
SYNTAX INTEGER {
critical(0),
non-Critical(2),
system-Level(4),
unknown(9),
noResponse(170),
normal(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis status."
::= { cmeRemoteChassisEntry 13 }
cmeChassisUuid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis UUID."
::= { cmeRemoteChassisEntry 14 }
cmeChassisMidPid OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis mid-plane ID."
::= { cmeRemoteChassisEntry 15}
cmeChassisId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis ID."
::= { cmeRemoteChassisEntry 16}
cmeChassisLocation OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis location information."
::= { cmeRemoteChassisEntry 17 }
cmeChassisRoomId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis room ID."
::= { cmeRemoteChassisEntry 18 }
cmeChassisRackId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis rack ID."
::= { cmeRemoteChassisEntry 19 }
cmeChassisUser OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis user information."
::= { cmeRemoteChassisEntry 20 }
cmeChassisFruList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis FRU list."
::= { cmeRemoteChassisEntry 21 }
cmeFirmwareVersion OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Firmware version of the discovery management module."
::= { cmeRemoteChassisEntry 22 }
cmeChassisType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Chassis type."
::= { cmeRemoteChassisEntry 23 }
cmeIpv4Status OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A flag to state if IPv4 is enabled"
::= { cmeRemoteChassisEntry 24 }
cmeIpv4Addresses OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv4 addresses configured for the chassis."
::= { cmeRemoteChassisEntry 25 }
cmeIpv4AddressesFloat OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The floating IPv4 addresses configured for the chassis."
::= { cmeRemoteChassisEntry 26 }
cmeIpv4Protocols OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv4 protocols configured for the chassis."
::= { cmeRemoteChassisEntry 27 }
cmeIpv6Status OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A flag to state if IPv6 is enabled"
::= { cmeRemoteChassisEntry 28 }
cmeIpv6Addresses OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 addresses configured for the chassis."
::= { cmeRemoteChassisEntry 29 }
cmeIpv6AddressesFloat OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The floating IPv6 addresses configured for the chassis."
::= { cmeRemoteChassisEntry 30}
cmeIpv6Protocols OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPv6 protocols configured for the chassis."
::= { cmeRemoteChassisEntry 31 }
chassisDiscovery OBJECT-TYPE
SYNTAX INTEGER{
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Discovery of remote Chassis.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { cmeRemoteChassis 2}
-- ********************************************************************************
-- componentPower
-- ********************************************************************************
componentPower OBJECT IDENTIFIER ::= { components 31 }
-- component power/restart control
-- ********************************************************************************
-- componentPowerTable
-- ********************************************************************************
componentPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component remote power control information.
Contains power on/off enablement status for each component."
::= { componentPower 1 }
componentPowerEntry OBJECT-TYPE
SYNTAX ComponentPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component power/restart table entry"
INDEX { componentPowerTopologyPath }
::= { componentPowerTable 1 }
ComponentPowerEntry ::= SEQUENCE {
componentPowerTopologyPath OCTET STRING,
componentPowerName OCTET STRING,
componentPowerState INTEGER,
componentPowerAction INTEGER,
componentPowerEnableSMSBootMenu INTEGER
}
componentPowerTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentPowerEntry 1 }
componentPowerName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentPowerEntry 2 }
componentPowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the component specified.
If the state cannot be determined, the unknown(255) is returned."
::= { componentPowerEntry 3 }
componentPowerAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
off(1),
on(2),
softoff(3),
restart(4),
restartSysMgmtProcessor(5),
restartNMI(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control the power state of a specific component.
none: No action, value returned for GET.
off: Power-off component.
on: Power-on component.
softoff: Shutdown OS and power-off component. This
operation is not supported on all components.
restart: Restart a component.
restartSysMgmtProcessor:
Restart a component's system management processor.
restartNMI:
Issue a NMI (Non-Maskable Interrupt) restart to
the component. This option is not supported on all
components.
NOTE: Value returned for the GET command is meaningless
for this MIB object. The componentPowerState MIB object should be
used to check the power state of the component(s)"
::= { componentPowerEntry 4 }
componentPowerEnableSMSBootMenu OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/disables a component restart to the SMS boot menu.
Setting this object to 'enable(1)' will cause a reboot of
the node to the SMS menu.
This option is not supported by all components, and at the time
of this MIB definition was only supported on POWER blades."
::= { componentPowerEntry 5 }
-- ********************************************************************************
-- componentPowerTableCacheTimeout
-- ********************************************************************************
componentPowerTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentPowerTable.
This value is static (constant) and cannot be set."
::= { componentPower 2 }
-- ********************************************************************************
-- componentPowerDetailsTable
-- ********************************************************************************
componentPowerDetailsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentPowerDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component power detail information."
::= { componentPower 6 }
componentPowerDetailsEntry OBJECT-TYPE
SYNTAX ComponentPowerDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component power Details table entry"
INDEX { componentPowerDetailsTopologyPath }
::= { componentPowerDetailsTable 1 }
ComponentPowerDetailsEntry ::= SEQUENCE {
componentPowerDetailsTopologyPath OCTET STRING,
componentPowerDetailsName OCTET STRING,
componentPowerDetailsMaxPowerConfig INTEGER,
componentPowerDetailsEffectiveClockRate OCTET STRING,
componentPowerDetailsMaximumClockRate OCTET STRING,
componentPowerDetailsPowerSaverMode INTEGER,
componentPowerDetailsDynamicPowerSaver INTEGER,
componentPowerDetailsDynamicPowerFavorPerformanceOverPower INTEGER,
componentPowerDetailsPowerControl INTEGER,
componentPowerDetailsPcapMin OCTET STRING,
componentPowerDetailsPcapGuaranteedMin OCTET STRING,
componentPowerDetailsPcapMax OCTET STRING,
componentPowerDetailsStaticCap OCTET STRING,
componentPowerDetailsRuntimeCap OCTET STRING
}
componentPowerDetailsTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentPowerDetailsEntry 1 }
componentPowerDetailsName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentPowerDetailsEntry 2 }
componentPowerDetailsMaxPowerConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Component Module Details Table Maximum Power Configuration.
Allow the user to set the maximum power that can be used by the component. This
function is also known as power capping.
Component must be powered on to set this value.
If the value of maximum power config is zero, it means the component doesn't
support the power capping feature"
::= { componentPowerDetailsEntry 3 }
componentPowerDetailsEffectiveClockRate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Component Module Details Table Effective CPU Clock Rate applies to DPM
components only. It displays processor's effective clock rate based
on sample interval. Note that some components do not effective
clock rate. In this case, 'notApplicable' will be displayed.
NOTE: The effective clock rate are reported only on a primary slot when
a server component spans multiple slots (e.g. double wide or
triple wide). For example if the component is double wide and
is installed in slot 3 and 4. 3 is primary slot while 4 is not.
The effective clock rate are reported on slot 3 while 'notApplicable'
is displayed for slot 4."
::= { componentPowerDetailsEntry 4 }
componentPowerDetailsMaximumClockRate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Component Module Details Table Maximum CPU Clock Rate applies to DPM
components only. It displays processor's maximum clock rate based
on sample interval. Note that some components do not maximum
clock rate. In this case, 'notApplicable' will be displayed.
NOTE: The maximum clock rate are reported only on a primary slot when
a server components spans multiple slots (e.g. double wide or
triple wide). For example if the component is double wide and
is installed in slot 3 and 4. 3 is primary slot while 4 is not.
The maximum clock rate are reported on slot 3 while 'notApplicable'
is displayed for slot 4."
::= { componentPowerDetailsEntry 5 }
componentPowerDetailsPowerSaverMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, the static low power saver mode allows the component to selectively
alter its operating voltage and frequency to reduce power consumption.
This feature is not available on all component types. Please refer to the component documentation for details.
If a component does not support the static low power saver mode, this object will return notApplicable (255).
Under certain rare circumstances, the enabling of the static low power saver mode
may not complete successfully due to interactions with other
component functions, such as BIOS. Therefore, it is highly recommended that
the user perform a GET of this object after performing a SET, in order
to verify the completion of the intended operation.
NOTE: enabling this object will disable componentPowerDetailsDynamicPowerSaver if its not already disabled."
::= { componentPowerDetailsEntry 6 }
componentPowerDetailsDynamicPowerSaver OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, Dynamic Power Saver allows the voltage and frequency of the CPUs on the component
to be controlled based on how busy the CPU is. This feature is not available on all component types.
Please refer to the component documentation for details. If a component does not support the dynamic power
saver, this object will return notApplicable (255).
Under certain rare circumstances, the enabling of the dynamic power saver may not complete
successfully due to interactions with other component functions, such as BIOS. Therefore, it is
highly recommended that the user perform a GET of this object after performing a SET, in order
to verify the completion of the intended operation.
NOTE: enabling this object will disable componentPowerDetailsPowerSaverMode if its not already disabled."
::= { componentPowerDetailsEntry 7 }
componentPowerDetailsDynamicPowerFavorPerformanceOverPower OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the
system past its nominal CPU frequency when CPU and memory utilization implies it would help and the
system allows it. Dynamic Power Performance Over Power can be active on the component only after Dynamic
Power Saver is enabled. This feature is not available on all components types. Please refer to the
component documentation for details. If a component does not support the dynamic power saver, this object
will return notApplicable (255).
Under certain rare circumstances, the enabling of the dynamic power favor performance over power
may not complete successfully due to interactions with other component functions, such as BIOS.
Therefore, it is highly recommended that the user perform a GET of this object after performing a SET,
in order to verify the completion of the intended operation."
::= { componentPowerDetailsEntry 8 }
componentPowerDetailsPowerControl OBJECT-TYPE
SYNTAX INTEGER {
none(0),
measurement(1),
measurementpcap(2),
psave(3),
measurementpsave(4),
measurementpcappsave(5),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to get or set the power control setting on a component.
If dynamic power mgmt is not supported on a component, notApplicable(255) will be returned.
This will set the power control setting on all slots of the multiwide component. The
same can be used if the component is single wide."
::= { componentPowerDetailsEntry 9 }
componentPowerDetailsPcapMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Component Module Details Table power capping Minimum value in watts.
The component must support the advanced power management feature.
If the value of Pcap Min is 'notApplicable', it means the component doesn't
support the power capping feature.
If the value of Pcap Min is 'notAvailable', it means the data
could not be obtained."
::= { componentPowerDetailsEntry 10 }
componentPowerDetailsPcapGuaranteedMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Component Module Details Table power capping Guaranteed Minimum value in watts.
The component must support the advanced power management feature.
If the value of Pcap Guaranteed Min is 'notApplicable', it means the component doesn't
support the power capping feature.
If the value of Pcap GuaranteedMin is 'notAvailable', it means the data
could not be obtained."
::= { componentPowerDetailsEntry 11 }
componentPowerDetailsPcapMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Component Module Details Table power capping Maximum value in watts.
The component must support the advanced power management feature.
If the value is '<max1> Watts,<max2> Watts', which means,
- if componentPowerDetailsDynamicPowerSaver is enabled, it is <max2>
- otherwise it is <max1>
If the value of Pcap Max is 'notApplicable', it means the component doesn't
support the power capping feature.
If the value of Pcap Min is 'notAvailable', it means the data
could not be obtained."
::= { componentPowerDetailsEntry 12 }
componentPowerDetailsStaticCap OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Component Module Details Table static capabilities list.
This is a list of five power management capabilities that the component
may or may not support. The list of power management capabilities is as follow:
Power Measurement
Power Capping
Power Saving
Dynamic Power Saving
Extended Dynamic Power Saving
The returned octet string contains 5 pairs of numeric characters separated by
blank characters. Each of these pairs will consist of either '00' or '01'.
'00' indicates that the capability is not there, '01' indicates that the capability
is present on the component.
The 5 pairs represent the capabilities of the 5 types listed above, in order,
for this component in the table.
Example response: '01 01 00 00 00'
This component has the capability of Power Management and Power Capping, but does not
support the last three types."
::= { componentPowerDetailsEntry 13 }
componentPowerDetailsRuntimeCap OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Component Module Details Table run-time capabilities list.
If the component supports the capability as indicated in the static capability information,
the user has the ability to enable or disable that function and this table reflects that configuration.
The power management capabilites for the run-time list is as follows:
Power Measurement
Power Capping
Power Saving
Dynamic Power Saving
Extended Dynamic Power Saving
The returned octet string contains 5 pairs of numeric characters separated by
blank characters. Each of these pairs will consist of either '00' or '01'.
'00' indicates that the capability is currently not available, '01' indicates that
the capability is currently available.
The 5 pairs represent the current capabilities of the 5 types listed above, in order,
for this component in the table.
Example response: '01 00 00 00 00'
This component has the capability of Power Management only. The current state of the
component does not support the remaining 4 capabiites at this time."
::= { componentPowerDetailsEntry 14 }
-- *************************************************************************
-- componentPowerDetailsTableCacheTimeout
-- *************************************************************************
componentPowerDetailsTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentPowerDetailsTable.
This value is static (constant) and cannot be set."
::= { componentPower 7 }
-- ********************************************************************************
-- componentConfiguration
-- ********************************************************************************
componentConfiguration OBJECT IDENTIFIER ::= { components 32 }
-- component configuration control
-- ********************************************************************************
-- componentBayDataTable
-- ********************************************************************************
componentBayDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentBayDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component bay User data information.
Contains user provided data for each component bay."
::= { componentConfiguration 1 }
componentBayDataEntry OBJECT-TYPE
SYNTAX ComponentBayDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component Bay Data table entry"
INDEX { componentBayDataTopologyPath }
::= { componentBayDataTable 1 }
ComponentBayDataEntry ::= SEQUENCE {
componentBayDataTopologyPath OCTET STRING,
componentBayDataName OCTET STRING,
componentBayDataStatus INTEGER,
componentBayData OCTET STRING
}
componentBayDataTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentBayDataEntry 1 }
componentBayDataName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentBayDataEntry 2 }
componentBayDataStatus OBJECT-TYPE
SYNTAX INTEGER {
supported(0),
bsmp(1),
notPresent(2),
discovering(3),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This shows Bay Data (BD) Status.
0 means the component fully supports BD.
1 means that the component's BIOS does not support BD.
2 means that there is no component in the bay.
3 means that the component is being discovered.
255 means that the component does not support BBD."
::= { componentBayDataEntry 3 }
componentBayData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..60))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A null terminated string that defines the component Bay Data.
This data is puched to the components's BSMP and SMBIOS structures,
where it can be used by the components's OS. Up to 60 characters can
be defined plus a Null terminator."
::= { componentBayDataEntry 4 }
-- *************************************************************************
-- componentBayDataTableCacheTimeout
-- *************************************************************************
componentBayDataTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentBayDataTable.
This value is static (constant) and cannot be set."
::= { componentConfiguration 2 }
-- ********************************************************************************
-- componentEthOverUSBInterfaceTable
-- ********************************************************************************
componentEthOverUSBInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentEthOverUSBInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade Service Processor's Ethernet over USB interface."
::= { componentConfiguration 6 }
componentEthOverUSBInterfaceEntry OBJECT-TYPE
SYNTAX ComponentEthOverUSBInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade Service Processor's Ethernet over USB interface entry."
INDEX { componentEthOverUSBInterfaceTopologyPath }
::= { componentEthOverUSBInterfaceTable 1 }
ComponentEthOverUSBInterfaceEntry ::= SEQUENCE {
componentEthOverUSBInterfaceTopologyPath OCTET STRING,
componentEthOverUSBInterfaceName OCTET STRING,
componentEthOverUSBInterfaceEnable INTEGER
}
componentEthOverUSBInterfaceTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentEthOverUSBInterfaceEntry 1 }
componentEthOverUSBInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentEthOverUSBInterfaceEntry 2 }
componentEthOverUSBInterfaceEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the user to view the status of, and enable
or disable, a component's interface on Ethernet-over-USB.
NOTE: If the component either does not exist or does not support
Ethernet-over-USB command interface. It displays 'notApplicable'.
NOTE: It will take about 10 or more seconds for the disable/enable
setting to take effect."
::= { componentEthOverUSBInterfaceEntry 3 }
-- *************************************************************************
-- componentEthOverUSBInterfaceTableCacheTimeout
-- *************************************************************************
componentEthOverUSBInterfaceTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentEthOverUSBInterfaceTable.
This value is static (constant) and cannot be set."
::= { componentConfiguration 7 }
-- ********************************************************************************
-- componentConfigurationTable
-- ********************************************************************************
componentConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentConfigurationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component configuration information."
::= { componentConfiguration 11 }
componentConfigurationEntry OBJECT-TYPE
SYNTAX ComponentConfigurationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component configuration table entry"
INDEX { componentConfigurationTopologyPath }
::= { componentConfigurationTable 1 }
ComponentConfigurationEntry ::= SEQUENCE {
componentConfigurationTopologyPath OCTET STRING,
componentConfigurationName OCTET STRING,
componentConfigurationActiveBootMode INTEGER,
componentConfigurationPendingBootMode INTEGER,
componentConfigurationAutoPowerOn INTEGER,
componentConfigurationPowerOnRestartDelay INTEGER,
componentConfigurationLocalPowerControlEnable INTEGER,
componentConfigurationWakeOnLanControlEnable INTEGER
}
componentConfigurationTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentConfigurationEntry 1 }
componentConfigurationName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string.
This object is configurable."
::= { componentConfigurationEntry 2 }
componentConfigurationActiveBootMode OBJECT-TYPE
SYNTAX INTEGER {
temporary(1),
permanent(2),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the active copy of the firmware from which the component is booting.
NOTE: Some components do not support the automatic boot recovery. It displays
'notApplicable' for such components.
Booting from the temporary copy is recommended since it typically contains the
latest enhancements and fixes. Switching to the permanent copy should be reserved
for when booting from the temporary copy is no longer possible."
::= { componentConfigurationEntry 3 }
componentConfigurationPendingBootMode OBJECT-TYPE
SYNTAX INTEGER {
temporary(1),
permanent(2),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the copy of the firmware from which the component will boot
after the next reboot.
NOTE: Some components do not support the automatic boot recovery. It displays
'notApplicable' for such components and the value can not be set.
Booting from the temporary copy is recommended since it typically contains the
latest enhancements and fixes. Switching to the permanent copy should be reserved
for when booting from the temporary copy is no longer possible."
::= { componentConfigurationEntry 4 }
componentConfigurationAutoPowerOn OBJECT-TYPE
SYNTAX INTEGER {
restore(1),
auto(2),
manual(3),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Component auto-power on policy.
- restore: component will be powered on which were previously on.
- auto: component will automatically be powered on when power is applied to the chassis.
- manual: component will be left off until manually powered on by the user.
- notApplicable: is a read-only value, this value cannot be set."
::= { componentConfigurationEntry 5 }
componentConfigurationPowerOnRestartDelay OBJECT-TYPE
SYNTAX INTEGER (0..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restart delay (in seconds) when power is applied to a component."
::= { componentConfigurationEntry 6 }
componentConfigurationLocalPowerControlEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Component local power control enablement status."
::= { componentConfigurationEntry 7 }
componentConfigurationWakeOnLanControlEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Component Wake On LAN enablement status.
If WOL is not supported by the component, it displays 'notApplicable'
and WOL can not be enabled or disabled."
::= { componentConfigurationEntry 8 }
-- *************************************************************************
-- componentConfigurationTableCacheTimeout
-- *************************************************************************
componentConfigurationTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentConfigurationTable.
This value is static (constant) and cannot be set."
::= { componentConfiguration 12 }
-- ********************************************************************************
-- componentNetworkConfiguration
-- ********************************************************************************
componentNetworkConfiguration OBJECT IDENTIFIER ::= { componentConfiguration 16 }
componentIPv4ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentIPv4ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of all components' network interfaces."
::= { componentNetworkConfiguration 1 }
componentIPv4ConfigEntry OBJECT-TYPE
SYNTAX ComponentIPv4ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component configuration table entry"
INDEX { componentIPv4ConfigTopologyPath, componentIPv4ConfigPortIndex }
::= { componentIPv4ConfigTable 1 }
ComponentIPv4ConfigEntry ::= SEQUENCE {
componentIPv4ConfigTopologyPath OCTET STRING,
componentIPv4ConfigPortIndex INTEGER,
componentIPv4ConfigName OCTET STRING,
componentIPv4ConfigPortLabel OCTET STRING,
componentIPv4ConfigPhysicalLinkStatus INTEGER,
componentIPv4ConfigPhysicalLinkState INTEGER,
componentIPv4ConfigIPAddr IpAddress,
componentIPv4ConfigSubnetMask IpAddress,
componentIPv4ConfigGatewayAddr IpAddress,
componentIPv4ConfigVlanId INTEGER,
componentIPv4ConfigDHCPEnable INTEGER,
componentIPv4ConfigMACAddr OCTET STRING
}
componentIPv4ConfigTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentIPv4ConfigEntry 1 }
componentIPv4ConfigPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical port number of the given entry."
::= { componentIPv4ConfigEntry 2 }
componentIPv4ConfigName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentIPv4ConfigEntry 3 }
componentIPv4ConfigPortLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show string label that identifies the interface."
::= { componentIPv4ConfigEntry 4 }
componentIPv4ConfigPhysicalLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether this network interface port is up or down.
If this network interface doesn't support up/down, show
'notApplicable(255)'."
::= { componentIPv4ConfigEntry 5 }
componentIPv4ConfigPhysicalLinkState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
loopback(2),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configuration object for requesting the physical port
to be either, down(0), up(1) or loopback(2). To get the
current status of a physical port, use the object,
componentIPv4ConfigPhysicalLinkStatus.
If this network interface doesn't support up/down/loopback,
show 'notApplicable(255)'."
::= { componentIPv4ConfigEntry 6 }
componentIPv4ConfigIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Show/modify current IP address of the component network
interface. Note that only if the
componentIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
componentIPv4ConfigDHCPEnable is not 'useDhcp(1)', should the
IP address be pushed down to component System Management
Processor."
::= { componentIPv4ConfigEntry 7 }
componentIPv4ConfigSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Show or modifie current subnet mask of the component network
interface. Note that only if the
componentIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
componentIPv4ConfigDHCPEnable is not 'useDhcp(1)', should the
IP address be pushed down to component System Management
Processor."
::= { componentIPv4ConfigEntry 8 }
componentIPv4ConfigGatewayAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Show or modify current IP gateway of the component network
interface. Note that only if the
componentIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
componentIPv4ConfigDHCPEnable is not 'useDhcp(1)', should the
IP address be pushed down to component System Management
Processor."
::= { componentIPv4ConfigEntry 9 }
componentIPv4ConfigVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Virtual LAN ID for supported network
interface cards (NICs). The range of valid VLAN ID's
is 0 to 4095."
::= { componentIPv4ConfigEntry 10 }
componentIPv4ConfigDHCPEnable OBJECT-TYPE
SYNTAX INTEGER {
useStatic(0),
useDhcp(1),
tryDhcpThenTryStatic(2),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP config method on the component network interface to modify
mode to static IP, DHCP and 'try DHCP then try static'.
If this network interface doesn't support DHCP, show
'notApplicable(255)'."
::= { componentIPv4ConfigEntry 11 }
componentIPv4ConfigMACAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show the component network interface MAC address. If this
network interface doesn't support MAC, show
'notApplicable'."
::= { componentIPv4ConfigEntry 12 }
-- *************************************************************************
-- componentIPv4ConfigTableCacheTimeout
-- *************************************************************************
componentIPv4ConfigTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentIPv4ConfigTable.
This value is static (constant) and cannot be set."
::= { componentNetworkConfiguration 2 }
-- ********************************************************************************
-- componentIPv6Config
-- ********************************************************************************
componentIPv6Config OBJECT IDENTIFIER ::= { componentNetworkConfiguration 11 }
componentIPv6ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentIPv6ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of IPv6 configuration options for components.
NOTE: This MIB object is not applicable to components that
do not support IPv6."
::= { componentIPv6Config 1 }
componentIPv6ConfigEntry OBJECT-TYPE
SYNTAX ComponentIPv6ConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPv6 configuration options for a component.
NOTE: This MIB object is not applicable to components that
do not support IPv6."
INDEX { componentIPv6ConfigTopologyPath, componentIPv6ConfigPortIndex }
::= { componentIPv6ConfigTable 1 }
ComponentIPv6ConfigEntry ::= SEQUENCE {
componentIPv6ConfigTopologyPath OCTET STRING,
componentIPv6ConfigPortIndex INTEGER,
componentIPv6ConfigName OCTET STRING,
componentIPv6ConfigEnabled INTEGER,
componentIPv6ConfigStatic INTEGER,
componentDHCPv6ConfigEnabled INTEGER,
componentIPv6ConfigStatelessEnabled INTEGER
}
componentIPv6ConfigTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentIPv6ConfigEntry 1 }
componentIPv6ConfigPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical port number of the given entry"
::= { componentIPv6ConfigEntry 2 }
componentIPv6ConfigName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentIPv6ConfigEntry 3 }
componentIPv6ConfigEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 support on the component."
::= { componentIPv6ConfigEntry 4 }
componentIPv6ConfigStatic OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 static configuration support on the component."
::= { componentIPv6ConfigEntry 5 }
componentDHCPv6ConfigEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables DHCPv6 address configuration support on the component."
::= { componentIPv6ConfigEntry 6 }
componentIPv6ConfigStatelessEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0),enable(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables IPv6 stateless auto-configuration support on the component."
::= { componentIPv6ConfigEntry 7 }
-- *************************************************************************
-- componentIPv6ConfigTableCacheTimeout
-- *************************************************************************
componentIPv6ConfigTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentIPv6ConfigTable.
This value is static (constant) and cannot be set."
::= { componentIPv6Config 2 }
componentIPv6AddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentIPv6AddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of assigned IPv6 addresses for components.
NOTE: This MIB object is not applicable to components that
do not support IPv6."
::= { componentIPv6Config 6 }
componentIPv6AddressEntry OBJECT-TYPE
SYNTAX ComponentIPv6AddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The assigned IPv6 address for a given component.
NOTE: This MIB object is not applicable to components that
do not support IPv6."
INDEX { componentIPv6AddressTopologyPath, componentIPv6AddressPortIndex, componentIPv6AddressEntryIndex}
::= { componentIPv6AddressTable 1 }
ComponentIPv6AddressEntry ::= SEQUENCE {
componentIPv6AddressTopologyPath OCTET STRING,
componentIPv6AddressPortIndex INTEGER,
componentIPv6AddressEntryIndex INTEGER,
componentIPv6AddressName OCTET STRING,
componentIPv6AddressType INTEGER,
componentIPv6Address InetAddressIPv6,
componentIPv6AddressPrefixLen INTEGER,
componentIPv6AddressDefaultRoute InetAddressIPv6
}
componentIPv6AddressTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with multiple indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentIPv6AddressEntry 1 }
componentIPv6AddressPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The component's physical port number for the given entry."
::= { componentIPv6AddressEntry 2 }
componentIPv6AddressEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The component's address entry index."
::= { componentIPv6AddressEntry 3 }
componentIPv6AddressName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentIPv6AddressEntry 4 }
componentIPv6AddressType OBJECT-TYPE
SYNTAX INTEGER
{ active-static(1),
dhcp6(2),
link-local(3),
autconfig(4),
current(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address type."
::= { componentIPv6AddressEntry 5 }
componentIPv6Address OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The assigned IPv6 address.
Note: 'write' is for static ipv6 only."
::= { componentIPv6AddressEntry 6 }
componentIPv6AddressPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The prefix length for the given address.
Note: 'write' is for static ipv6 only."
::= { componentIPv6AddressEntry 7 }
componentIPv6AddressDefaultRoute OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default route used for the given address.
Note: 'write' is for static ipv6 only."
::= { componentIPv6AddressEntry 8 }
-- *************************************************************************
-- componentIPv6AddressTableCacheTimeout
-- *************************************************************************
componentIPv6AddressTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentIPv6AddressTable.
This value is static (constant) and cannot be set."
::= { componentIPv6Config 7 }
-- ********************************************************************************
-- componentTimeTable
-- ********************************************************************************
componentTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentTimeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Component NTP Configuration."
::= { componentConfiguration 20 }
componentTimeEntry OBJECT-TYPE
SYNTAX ComponentTimeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component NTP Configuration entry."
INDEX { componentTimeTopologyPath }
::= { componentTimeTable 1 }
ComponentTimeEntry ::= SEQUENCE {
componentTimeTopologyPath OCTET STRING,
componentTimeName OCTET STRING,
componentTimeNTPEnable INTEGER,
componentTimeNTPFrequency INTEGER
}
componentTimeTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentTimeEntry 1 }
componentTimeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentTimeEntry 2 }
componentTimeNTPEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the user to view the status of, and enable
or disable, a component's ability to have it's NTP information
updated by the CMM.
NOTE: If the component either does not exist or does not support
this feature, it displays 'notApplicable'."
::= { componentTimeEntry 3 }
componentTimeNTPFrequency OBJECT-TYPE
SYNTAX INTEGER (0..44640)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the user to view or set the synchronization
frequency (in minutes) of the NTP information update from the CMM.
NOTE: If the component either does not exist or does not support
this feature, it displays '0'."
::= { componentTimeEntry 4 }
-- *************************************************************************
-- componentTimeTableCacheTimeout
-- *************************************************************************
componentTimeTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentTimeTable.
This value is static (constant) and cannot be set."
::= { componentConfiguration 21 }
-- ********************************************************************************
-- componentSolTable
-- ********************************************************************************
componentSolTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentSolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component Serial-over-LAN (SOL) configuration table."
::= { componentConfiguration 26 }
componentSolEntry OBJECT-TYPE
SYNTAX ComponentSolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component Serial-over-LAN (SOL) configuration entry."
INDEX { componentSolTopologyPath }
::= { componentSolTable 1 }
ComponentSolEntry ::= SEQUENCE {
componentSolTopologyPath OCTET STRING,
componentSolName OCTET STRING,
componentSolEnable INTEGER,
componentSolIpAddr IpAddress,
componentSolSessionStatus INTEGER,
componentSolCapability INTEGER,
componentSolIpAddr6 InetAddressIPv6,
componentSolRetryInterval INTEGER,
componentSolRetryCount INTEGER,
componentSolBytesSent INTEGER,
componentSolBytesReceived INTEGER,
componentSolDestinationMAC OCTET STRING,
componentSolConsoleUserId OCTET STRING,
componentSolConsoleLoginFrom OCTET STRING,
componentSolConsoleLoginStart OCTET STRING,
componentSolConsoleLoginEnd OCTET STRING
}
componentSolTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentSolEntry 1 }
componentSolName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentSolEntry 2 }
componentSolEnable OBJECT-TYPE
SYNTAX INTEGER {
solDisabled(0),
solEnabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable or enable the Serial-over-LAN (SOL) on a component."
::= { componentSolEntry 3 }
componentSolIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS deprecated
DESCRIPTION
" This is deprecated in favor of componentSolIpAddr.
IP address of the component derived from the IP address
range for the system management processors on the
component.
NOTE: The IPv6 address for a component can be view with the
componentIPv6AddressTable."
::= { componentSolEntry 4 }
componentSolSessionStatus OBJECT-TYPE
SYNTAX INTEGER {
solSessionNotReady(0),
solSessionReady(1),
solSessionActive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of a Serial-over-LAN (SOL) session:
solSessionNotReady: No SOL session connected to the
component.
solSessionReady: There is a SOL session to the
component.
solSessionActive: There is a SOL session to the
component and there is a client
using the SOL session."
::= { componentSolEntry 5 }
componentSolCapability OBJECT-TYPE
SYNTAX INTEGER {
notSupport(0),
support(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display whether or not the component supports the
Serial-over-LAN (SOL) feature."
::= { componentSolEntry 6 }
componentSolIpAddr6 OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPv6 address of the blade."
::= { componentSolEntry 7 }
componentSolRetryInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Retry interval time in miliseconds."
::={componentSolEntry 8}
componentSolRetryCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Retry count."
::={componentSolEntry 9}
componentSolBytesSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of bytes sent."
::={componentSolEntry 10}
componentSolBytesReceived OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of bytes received."
::={componentSolEntry 11}
componentSolDestinationMAC OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" MAC address of the blade."
::={componentSolEntry 12}
componentSolConsoleUserId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Sol console user name."
::={componentSolEntry 13}
componentSolConsoleLoginFrom OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The location information from where the SOL console is logged in. "
::={componentSolEntry 14}
componentSolConsoleLoginStart OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The time that SOL console starts. "
::={componentSolEntry 15}
componentSolConsoleLoginEnd OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The time that SOL console ends. "
::={componentSolEntry 16}
-- *************************************************************************
-- componentSolTableCacheTimeout
-- *************************************************************************
componentSolTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentSolTable.
This value is static (constant) and cannot be set."
::= { componentConfiguration 27 }
-- ********************************************************************************
-- componentMonitors
-- ********************************************************************************
componentMonitors OBJECT IDENTIFIER ::= { components 37 }
-- ********************************************************************************
-- componentSystemStatusTable
-- ********************************************************************************
componentSystemStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentSystemStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component status information."
::= { componentMonitors 1 }
componentSystemStatusEntry OBJECT-TYPE
SYNTAX ComponentSystemStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component system status entry"
INDEX { componentStatusTopologyPath }
::= { componentSystemStatusTable 1 }
ComponentSystemStatusEntry ::= SEQUENCE {
componentStatusTopologyPath OCTET STRING,
componentStatusName OCTET STRING,
componentStatusPowerState INTEGER,
componentStatusHealthState INTEGER,
componentStatusPowerEnable INTEGER,
componentStatusWakeOnLanEnable INTEGER,
componentStatusWidth INTEGER,
componentStatusIOCompatibility OCTET STRING,
componentStatusInventoryReady INTEGER,
componentStatusBootCountPowerOnTimeBoots INTEGER,
componentStatusBootCountPowerOnTimeSecs INTEGER
}
componentStatusTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentSystemStatusEntry 1 }
componentStatusName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentSystemStatusEntry 2 }
componentStatusPowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the component specified."
::= { componentSystemStatusEntry 3 }
componentStatusHealthState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
critical(3),
kernelMode(4),
discovering(5),
commError(6),
noPower(7),
flashing(8),
initFailure(9),
insufficientPower(10),
powerDenied(11),
maintMode(12),
firehoseDump(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system health state for the component.
Unknown: Component is in an undefined state.
Good: Component is operating normally.
Warning: One or more outstanding warnings exist for this component.
Critical: One or more outstanding critical events for this component.
Kernel Mode: Component is in kernel mode.
Discovering: The MM is currently in the process of discovering this component.
Communications Error: The MM failed to communicate with this component.
No Power: No power to the component's domain.
Flashing: Flashing in progress.
Initialization Failure: Component failed to initialized.
Insufficient Power: Not enough power is left in the component's domain to power the component.
Power Denied: Power was denied to the component."
::= { componentSystemStatusEntry 4 }
componentStatusPowerEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power enable state for the component."
::= { componentSystemStatusEntry 5 }
componentStatusWakeOnLanEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wake on LAN enable state for the component."
::= { componentSystemStatusEntry 6 }
componentStatusWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The width of the component including any supplement component attached to it"
::= { componentSystemStatusEntry 7 }
componentStatusIOCompatibility OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"I/O compatibility status for the component.
The possible values and their meanings are as follows:
unknown: This indicates a communication error for the component.
ok: This is the normal (good) case where the component and the
corresponding I/O modules it is internally wired to have no
compatibility issues.
noIOMs: This means there are no I/O modules in any of the
corresponding I/O module bays this component is internally wired to.
attention: This indicates that one or more of the corresponding
I/O modules are in communication error.
mismatch: This indicates one of the following cases:
Fabric types are incompatible
An unknown I/O module type
An unknown fabric type on the component"
::= { componentSystemStatusEntry 21 }
componentStatusInventoryReady OBJECT-TYPE
SYNTAX INTEGER {
notReady(0),
ready(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When a component management controller or the MM is reset, the
component inventory data is refreshed in the MM database. This includes
items like IBM VPD (e.g. - serial number, UUID) and MAC address information.
Applications need to know when this information has been populated on the MM
before they begin to query it using SNMP or other means. This simple flag
object will return a ready or notReady indication for each component regarding the
status of this information.
Notes:
For components that are experiencing a 'communication failure' or
'initialization failure' condition, this object will continue to indicate
notReady until the condition is resolved. Therefore, any application that
polls this object should also incorporate a timeout period."
::= { componentSystemStatusEntry 22 }
componentStatusBootCountPowerOnTimeBoots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade boot count. This is valid for blade components and
otherwise is undefined. Writing this
value resets the boot count to zero."
::= { componentSystemStatusEntry 23 }
componentStatusBootCountPowerOnTimeSecs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blade power on time in seconds. This is valid for blade
components and otherwise is undefined. Writing this
value resets the power on time to zero."
::= { componentSystemStatusEntry 24 }
-- *************************************************************************
-- componentSystemStatusTableCacheTimeout
-- *************************************************************************
componentSystemStatusTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentSystemStatusTable.
This value is static (constant) and cannot be set."
::= { componentMonitors 2 }
-- ********************************************************************************
-- componentHealthSummaryTable
-- ********************************************************************************
componentHealthSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentHealthSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component health summary information.
Contains information about the overall component health status.
Each component contains a list of critical or warning events for that component or severity of good or none if none exist."
::= { componentMonitors 6 }
componentHealthSummaryEntry OBJECT-TYPE
SYNTAX ComponentHealthSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component health summary entry"
INDEX { componentHealthTopologyPath, componentHealthEventIndex }
::= { componentHealthSummaryTable 1 }
ComponentHealthSummaryEntry ::= SEQUENCE {
componentHealthTopologyPath OCTET STRING,
componentHealthEventIndex INTEGER,
componentHealthSummaryName OCTET STRING,
componentHealthSummarySeverity OCTET STRING,
componentHealthSummaryDescription OCTET STRING,
componentHealthSummaryDateTime OCTET STRING,
componentHealthSummaryEventID OCTET STRING
}
componentHealthTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentHealthSummaryEntry 1 }
componentHealthEventIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index for the critical or warning health events for a given component."
::= { componentHealthSummaryEntry 2 }
componentHealthSummaryName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentHealthSummaryEntry 3 }
componentHealthSummarySeverity OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary severity of an event for the given component."
::= { componentHealthSummaryEntry 4 }
componentHealthSummaryDescription OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary description of an event for the given component."
::= { componentHealthSummaryEntry 5 }
componentHealthSummaryDateTime OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary date time of an event for the given component."
::= { componentHealthSummaryEntry 6 }
componentHealthSummaryEventID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System health summary event ID of an event for the given component."
::= { componentHealthSummaryEntry 7 }
-- *************************************************************************
-- componentHealthSummaryTableCacheTimeout
-- *************************************************************************
componentHealthSummaryTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentHealthSummaryTable.
This value is static (constant) and cannot be set."
::= { componentMonitors 7 }
-- ********************************************************************************
-- componentMACAddressTable
-- ********************************************************************************
componentMACAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentMACAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of MAC address VPD information for each component."
::= { componentMonitors 11 }
componentMACAddressEntry OBJECT-TYPE
SYNTAX ComponentMACAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component MAC address table entry"
INDEX { componentMACAddressTopologyPath, componentMACAddressIndex }
::= { componentMACAddressTable 1 }
ComponentMACAddressEntry ::= SEQUENCE {
componentMACAddressTopologyPath OCTET STRING,
componentMACAddressIndex INTEGER,
componentMACAddressName OCTET STRING,
componentMACAddress OCTET STRING
}
componentMACAddressTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentMACAddressEntry 1 }
componentMACAddressIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each component may have one or more MAC address VPD values
associated with it, and this index object identifies the
particular instance."
::= { componentMACAddressEntry 2 }
componentMACAddressName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentMACAddressEntry 3 }
componentMACAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address VPD value for this component and index. The
value is a null terminated string.
For IOMs which are members of a stack, this field is not applicable and should be disregarded."
::= { componentMACAddressEntry 4 }
-- *************************************************************************
-- componentMACAddressTableCacheTimeout
-- *************************************************************************
componentMACAddressTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentMACAddressTable.
This value is static (constant) and cannot be set."
::= { componentMonitors 12 }
-- ********************************************************************************
-- componentUniqueIDsTable
-- ********************************************************************************
componentUniqueIDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentUniqueIDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of unique ID information for each component."
::= { componentMonitors 13 }
componentUniqueIDsEntry OBJECT-TYPE
SYNTAX ComponentUniqueIDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component unique ID table entry"
INDEX { componentUniqueIDsTopologyPath, componentUniqueIDsIndex }
::= { componentUniqueIDsTable 1 }
ComponentUniqueIDsEntry ::= SEQUENCE {
componentUniqueIDsTopologyPath OCTET STRING,
componentUniqueIDsIndex INTEGER,
componentUniqueIDsName OCTET STRING,
componentUniqueIDsType INTEGER,
componentUniqueIDsValue OCTET STRING
}
componentUniqueIDsTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentUniqueIDsEntry 1 }
componentUniqueIDsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each component may have one or more unique ID values
associated with it, and this index object identifies the
particular instance."
::= { componentUniqueIDsEntry 2 }
componentUniqueIDsName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentUniqueIDsEntry 3 }
componentUniqueIDsType OBJECT-TYPE
SYNTAX INTEGER {
wwn(1),
guid(2),
sas(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type of the unique ID in the object,
componentUniqueIDsValue. The type is one of the following:
World Wide Name (wwn), Global Unique IDs (guid) or
Serial Attach SCSI IDs (sas)."
::= { componentUniqueIDsEntry 4 }
componentUniqueIDsValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique ID value for this component and index. The
value is a null terminated string."
::= { componentUniqueIDsEntry 5 }
-- *************************************************************************
-- componentUniqueIDsTableCacheTimeout
-- *************************************************************************
componentUniqueIDsTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentUniqueIDsTable.
This value is static (constant) and cannot be set."
::= { componentMonitors 14 }
-- ********************************************************************************
-- componentVoltagesTable
-- ********************************************************************************
componentVoltagesTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentVoltagesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component voltage sensor information."
::= { componentMonitors 16 }
componentVoltagesEntry OBJECT-TYPE
SYNTAX ComponentVoltagesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Component voltages entry."
INDEX { componentVoltagesTopologyPath, componentVoltagesSensorIndex }
::= { componentVoltagesTable 1 }
ComponentVoltagesEntry ::= SEQUENCE {
componentVoltagesTopologyPath OCTET STRING,
componentVoltagesSensorIndex INTEGER,
componentVoltagesComponentName OCTET STRING,
componentVoltagesSensorLabel OCTET STRING,
componentVoltagesSensorValue OCTET STRING,
componentVoltagesLowWarningThreshold OCTET STRING,
componentVoltagesHighWarningThreshold OCTET STRING
}
componentVoltagesTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentVoltagesEntry 1 }
componentVoltagesSensorIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index for the critical or warning health events for a given component."
::= { componentVoltagesEntry 2 }
componentVoltagesComponentName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentVoltagesEntry 3 }
componentVoltagesSensorLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The label of the sensor as a null terminated string."
::= { componentVoltagesEntry 4 }
componentVoltagesSensorValue OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the sensor as a null terminated string."
::= { componentVoltagesEntry 5 }
componentVoltagesLowWarningThreshold OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The low warning threshold of the sensor as a null terminated string."
::= { componentVoltagesEntry 6 }
componentVoltagesHighWarningThreshold OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The high warning threshold of the sensor as a null terminated string."
::= { componentVoltagesEntry 7 }
-- *************************************************************************
-- componentVoltagesTableCacheTimeout
-- *************************************************************************
componentVoltagesTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentVoltagesTable.
This value is static (constant) and cannot be set."
::= { componentMonitors 17 }
-- ********************************************************************************
-- componentTemperaturesTable
-- ********************************************************************************
componentTemperaturesTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentTemperaturesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component temperature sensor information."
::= { componentMonitors 21 }
componentTemperaturesEntry OBJECT-TYPE
SYNTAX ComponentTemperaturesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Component temperatures entry."
INDEX { componentTemperaturesTopologyPath, componentTemperaturesSensorIndex }
::= { componentTemperaturesTable 1 }
ComponentTemperaturesEntry ::= SEQUENCE {
componentTemperaturesTopologyPath OCTET STRING,
componentTemperaturesSensorIndex INTEGER,
componentTemperaturesComponentName OCTET STRING,
componentTemperaturesSensorLabel OCTET STRING,
componentTemperaturesSensorValue OCTET STRING,
componentTemperaturesWarningThreshold OCTET STRING,
componentTemperaturesShutdownThreshold OCTET STRING,
componentTemperaturesWarningResetThreshold OCTET STRING
}
componentTemperaturesTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentTemperaturesEntry 1 }
componentTemperaturesSensorIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index for the temperature Sensors for a given component."
::= { componentTemperaturesEntry 2 }
componentTemperaturesComponentName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentTemperaturesEntry 3 }
componentTemperaturesSensorLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The label of the sensor as a null terminated string."
::= { componentTemperaturesEntry 4 }
componentTemperaturesSensorValue OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the sensor as a null terminated string."
::= { componentTemperaturesEntry 5 }
componentTemperaturesWarningThreshold OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The warning threshold of the sensor as a null terminated string."
::= { componentTemperaturesEntry 6 }
componentTemperaturesShutdownThreshold OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Shutdown threshold of the sensor as a null terminated string."
::= { componentTemperaturesEntry 7 }
componentTemperaturesWarningResetThreshold OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Warning Reset threshold of the sensor as a null terminated string."
::= { componentTemperaturesEntry 8 }
-- *************************************************************************
-- componentTemperaturesTableCacheTimeout
-- *************************************************************************
componentTemperaturesTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentTemperaturesTable.
This value is static (constant) and cannot be set."
::= { componentMonitors 22 }
-- ********************************************************************************
-- componentIOCompatibilityTable
-- ********************************************************************************
componentIOCompatibilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentIOCompatibilityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component IO Compatibility information."
::= { componentMonitors 26 }
componentIOCompatibilityEntry OBJECT-TYPE
SYNTAX ComponentIOCompatibilityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Component IO compatibility entry."
INDEX { componentIOCompatibilityTopologyPath, componentIOCompatibilityIOMBay }
::= { componentIOCompatibilityTable 1 }
ComponentIOCompatibilityEntry ::= SEQUENCE {
componentIOCompatibilityTopologyPath OCTET STRING,
componentIOCompatibilityIOMBay INTEGER,
componentIOCompatibilityComponentName OCTET STRING,
componentIOCompatibilityIOMPower OCTET STRING,
componentIOCompatibilityIOMFabricType OCTET STRING,
componentIOCompatibilityFabricOnComponent OCTET STRING,
componentIOCompatibilityStatus OCTET STRING
}
componentIOCompatibilityTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentIOCompatibilityEntry 1 }
componentIOCompatibilityIOMBay OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index for the IO Compatibility modules for a given component."
::= { componentIOCompatibilityEntry 2 }
componentIOCompatibilityComponentName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentIOCompatibilityEntry 3 }
componentIOCompatibilityIOMPower OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power state of the module specified in componentIOCompatibilityIOMBay.
n/a if module not installed."
::= { componentIOCompatibilityEntry 4 }
componentIOCompatibilityIOMFabricType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fabric type of the module specified in componentIOCompatibilityIOMBay."
::= { componentIOCompatibilityEntry 5 }
componentIOCompatibilityFabricOnComponent OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fabric type for this channel on the original component (may be onboard fabric or
an expansion card)."
::= { componentIOCompatibilityEntry 6 }
componentIOCompatibilityStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The compatibility status between the component and the module specified
in componentIOCompatibilityIOMBay.
The possible values are:
OK: No compatibility issues
No IOM: There is no module on the other side of the wire for this channel on the component.
n/a: (Not applicable) The module specified in componentIOCompatibilityIOMBay is a bridge,
so the component port cannot connect to it.
Attention: The module specified in componentIOCompatibilityIOMBay has a communication error.
Mismatch: Indicates one of the following cases:
Fabric types are incompatible
Module specified in componentIOCompatibilityIOMBay is of unknown type
Unknown fabric type on the component"
::= { componentIOCompatibilityEntry 7 }
-- *************************************************************************
-- componentIOCompatibilityTableCacheTimeout
-- *************************************************************************
componentIOCompatibilityTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentIOCompatibilityTable.
This value is static (constant) and cannot be set."
::= { componentMonitors 27 }
-- *************************************************************************
-- Node Connectivity Information
-- *************************************************************************
nodeConnectivityTable OBJECT-TYPE
SYNTAX SEQUENCE OF NodeConnectivityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of node connectivity information. This table provides information
related to the node communication status."
::= { componentMonitors 31}
nodeConnectivityEntry OBJECT-TYPE
SYNTAX NodeConnectivityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Connectivity information for nodes."
INDEX { nodeConnectivityIndex }
::= { nodeConnectivityTable 1 }
NodeConnectivityEntry ::= SEQUENCE {
nodeConnectivityIndex INTEGER,
nodeConnectivityName OCTET STRING,
nodeConnectivityStatus INTEGER
}
nodeConnectivityIndex OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Node Connectivity table index. "
::= { nodeConnectivityEntry 1 }
nodeConnectivityName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the node as a null terminated string."
::= { nodeConnectivityEntry 2 }
nodeConnectivityStatus OBJECT-TYPE
SYNTAX INTEGER {
notcommunicating(0),
communicating(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the communication status of the node."
::= { nodeConnectivityEntry 3 }
-- ********************************************************************************
-- componentServiceResetTable
-- ********************************************************************************
componentServiceReset OBJECT IDENTIFIER ::= { components 38 }
componentServiceResetTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentServiceResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table providing aux power status and the ability
to perform a virtual reseat or hard restart of a component."
::= { componentServiceReset 1 }
componentServiceResetEntry OBJECT-TYPE
SYNTAX ComponentServiceResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component module power service reset entry"
INDEX { componentServiceResetTopologyPath }
::= { componentServiceResetTable 1 }
ComponentServiceResetEntry ::= SEQUENCE {
componentServiceResetTopologyPath OCTET STRING,
componentServiceResetName OCTET STRING,
componentServiceResetStatus INTEGER,
componentServiceResetCmd INTEGER
}
componentServiceResetTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a row in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
MEDIA_MODULE, 0x19 Container of one or more media devices
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX, 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentServiceResetEntry 1 }
componentServiceResetName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A short text string describing the particular component. For the
MM and blades, this name will be the configured name or its
serial number if no user configured name is available. For all
other components, this object will provide text to identify the
component."
::= { componentServiceResetEntry 2 }
componentServiceResetStatus OBJECT-TYPE
SYNTAX INTEGER {
auxPowerOff(0),
auxPowerOn(1),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the aux power. A value of auxPowerOff(0) indicates
that the componant aux power is off. A value of
auxPowerOn(1) indicates that the componant aux power is on."
::= { componentServiceResetEntry 3 }
componentServiceResetCmd OBJECT-TYPE
SYNTAX INTEGER {
noOperation(0),
resetVirtualReseatOperation(1),
resetHardRestartOperation(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"NOTE: Do not perform this service reset operation on a node that is
currently in a maintenance mode state. See componentStatusHealthState in
componentSystemStatusTable for maintMode(12) value.
To reset the auxiliary power on a component, set this object to
resetVirtualReseatOperation(1). This will toggle the auxiliary
power and simulate a physical removal and insertion.
During the operation, auxiliary power is removed from the component
and is then restored. For nodes, the power state will remain off and the
user will need to manually power on the node.
To perform a hard restart on the component, set this object to
resetHardRestartOperation(2). This will toggle the reset line to the
processor causing it to re-initialize.
This object is intended to be write-only.
The component will experience a temporary loss of communication and the power
state will change. Prior to executing this action, perform any operations needed
to protect user data.
Reading this object will always return the value of noOperation(0)."
::= { componentServiceResetEntry 4 }
-- *************************************************************************
-- componentServiceResetTableCacheTimeout
-- *************************************************************************
componentServiceResetTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentServiceResetTable.
This value is static (constant) and cannot be set."
::= { componentServiceReset 2 }
componentLEDs OBJECT IDENTIFIER ::= { components 39 }
-- ********************************************************************************
-- componentLEDsTable
-- ********************************************************************************
componentLEDsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentLEDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component LED information.
NOTE: Querying objects in this table may take significantly longer
than normal, so it is recommended that the query timeout be set to
a large value. On a fully populated chassis, the timeout should be set
to 120 seconds or more."
::= { componentLEDs 1 }
componentLEDsEntry OBJECT-TYPE
SYNTAX ComponentLEDsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component LEDs information entry"
INDEX { ledComponentTopologyPath }
::= { componentLEDsTable 1 }
ComponentLEDsEntry ::= SEQUENCE {
ledComponentTopologyPath OCTET STRING,
ledComponentName OCTET STRING,
ledComponentFault INTEGER,
ledComponentCheckLog INTEGER,
ledComponentIdentity INTEGER
}
ledComponentTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentLEDsEntry 1 }
ledComponentName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentLEDsEntry 2 }
ledComponentFault OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the component fault LED is on or off."
::= { componentLEDsEntry 3 }
ledComponentCheckLog OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the component check log information LED is on or off.
For Write access, the LED can be turned off only."
::= { componentLEDsEntry 4 }
ledComponentIdentity OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
blinking(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the component identify LED is on, off, or blinking."
::= { componentLEDsEntry 5 }
-- ********************************************************************************
-- componentLEDsTableCacheTimeout
-- ********************************************************************************
componentLEDsTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentLEDsTable.
This value is static (constant) and cannot be set."
::= { componentLEDs 2 }
-- ********************************************************************************
-- componentLEDsDetailsTable
-- ********************************************************************************
componentLEDsDetailsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentLEDsDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of LED info for each component."
::= { componentLEDs 9 }
componentLEDsDetailsEntry OBJECT-TYPE
SYNTAX ComponentLEDsDetailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component LED info table entry"
INDEX { componentLEDsDetailsTopologyPath, componentLEDsDetailsIndex }
::= { componentLEDsDetailsTable 1 }
ComponentLEDsDetailsEntry ::= SEQUENCE {
componentLEDsDetailsTopologyPath OCTET STRING,
componentLEDsDetailsIndex INTEGER,
componentLEDsDetailsComponentType OCTET STRING,
componentLEDsDetailsLabel OCTET STRING,
componentLEDsDetailsState INTEGER,
componentLEDsDetailsLocation OCTET STRING
}
componentLEDsDetailsTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
Note that this TP is preceded by a single octet that specifies the TP length.
This is required since this table is indexed with two indices and, therefore,
the TP length must be explicitly provided.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentLEDsDetailsEntry 1 }
componentLEDsDetailsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each component may have one or more LEDs and data
associated with it, and this index object identifies the
particular instance."
::= { componentLEDsDetailsEntry 2 }
componentLEDsDetailsComponentType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the component/subcomponent grouping for this LED."
::= { componentLEDsDetailsEntry 3 }
componentLEDsDetailsLabel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The text description of the LED."
::= { componentLEDsDetailsEntry 4 }
componentLEDsDetailsState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
blinking(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the LED."
::= { componentLEDsDetailsEntry 5 }
componentLEDsDetailsLocation OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical location of this LED on the hardware."
::= { componentLEDsDetailsEntry 6 }
-- *************************************************************************
-- componentLEDsDetailsTableCacheTimeout
-- *************************************************************************
componentLEDsDetailsTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentLEDsDetailsTable.
This value is static (constant) and cannot be set."
::= { componentLEDs 10 }
-- ************************************************************************
-- backupRestore
-- ************************************************************************
backupRestore OBJECT IDENTIFIER ::= { components 42 }
backupRestoreAction OBJECT-TYPE
SYNTAX INTEGER {
backup(0),
restore(1),
restoreAndRestart(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Starts the backup or restore operation.
It is intended to be write-only.
NOTE: This function is only available for SNMPv3."
::= { backupRestore 1 }
backupRestoreStatus OBJECT-TYPE
SYNTAX INTEGER {
ready(0),
pending(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Get the status of the last backup/restore action which was
initiated through SNMP.
NOTE: This function is only available for SNMPv3."
::= { backupRestore 2 }
backupRestoreMessage OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Get the status message of the last backup/restore action which was
initiated through SNMP.
NOTE: This function is only available for SNMPv3."
::= { backupRestore 3 }
backupRestoreURI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..254))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the fully qualified remote location of the file.
A fully qualified remote location contains a supported
protocol followed by a colon and two slashes (//), userid and
password separated by a colon for login authentication, an
@ sign, followed by the hostname or IP address of the
server where the packet file resides, followed by an optional
port number to the hostname, and the full pathname to the file.
Note that if the port number is specified, it must be
separated with the hostname (or IP address) by a colon.
The MM currently supports the following protocols:
TFTP, FTP, HTTP and HTTPS.
The complete format of a fully qualified remote location is:
<protocol>://<userid:password>@<hostname:port>/<pathname>
An example of a fully qualified remote location can be:
ftp://USERID:PASSW0RD@192.168.0.2:30045/tmp/cmd.bkp
where the ftp protocol will be used for transferring the file in
this location, username is USERID, password is
PASSW0RD, host IP address is 192.168.0.2, port number is
30045, and the full pathname for the packet file is /tmp/cmd.bkp.
Some protocols do not need the username, password, and
the port number, so the minimum requirement for a fully
qualified location can be:<protocol>://<hostname>/<pathname>.
Note:When using SFTP, only an RSA fingerprint is supported.
An example of a qualified location can be:
<protocol>://[<user>[:password][;fingerprint=<host>]@]<host>
[:<port>]/<path>/<to>/<file>
NOTE: This function is only available for SNMPv3."
::= { backupRestore 4 }
backupRestorePassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Password used for the encryption/decryption of the sensitive data
in the backup file.
It is intended to be write-only.
NOTE: This function is only available for SNMPv3."
::= { backupRestore 5 }
backupRestoreLogURI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..254))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the URI address where the log file will be put. It will be used only
if the backupRestoreLogPush will be set on push.
Contains the fully qualified remote location of the file.
A fully qualified remote location contains a supported
protocol followed by a colon and two slashes (//), userid and
password separated by a colon for login authentication, an
@ sign, followed by the hostname or IP address of the
server where the packet file will reside, followed by an optional
port number to the hostname, and the full pathname to the file.
Note that if the port number is specified, it must be
separated with the hostname (or IP address) by a colon.
The MM currently supports the following protocols:
TFTP, FTP, HTTP and HTTPS.
The complete format of a fully qualified remote location is:
<protocol>://<userid:password>@<hostname:port>/<pathname>
An example of a fully qualified remote location can be:
ftp://USERID:PASSW0RD@192.168.0.2:30045/tmp/restore.log
where the ftp protocol will be used for transferring the file in
this location, username is USERID, password is
PASSW0RD, host IP address is 192.168.0.2, port number is
30045, and the full pathname for the packet file is /tmp/restore.log.
Some protocols do not need the username, password, and
the port number, so the minimum requirement for a fully
qualified location can be:<protocol>://<hostname>/<pathname>.
Note: When using SFTP, only an RSA fingerprint is supported.
An example of a qualified location can be:
<protocol>://[<user>[:password][;fingerprint=<host>]@]<host>
[:<port>]/<path>/<to>/<file>
NOTE: This function is available only for SNMPv3."
::= { backupRestore 6 }
backupRestoreLogPush OBJECT-TYPE
SYNTAX INTEGER {
noPush(0),
push(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Causes the restore operation to push the log to the URI address.
NOTE: This can be used when restoring without restarting.
NOTE: This function is only available for SNMPv3."
::= { backupRestore 7 }
-- ************************************************************************
-- FFDC Service
-- ************************************************************************
bladeServiceData OBJECT IDENTIFIER ::= { service 3 }
bladeServiceDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladeServiceDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of blade service data information."
::= { bladeServiceData 1 }
bladeServiceDataEntry OBJECT-TYPE
SYNTAX BladeServiceDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade service data entry"
INDEX { serviceDataIndex }
::= { bladeServiceDataTable 1 }
BladeServiceDataEntry ::= SEQUENCE {
serviceDataIndex INTEGER,
serviceDataBladeId INTEGER,
serviceDataBladeExists INTEGER,
serviceDataBladePowerState INTEGER,
serviceDataBladeName OCTET STRING,
serviceDataDumpInitiate INTEGER,
serviceDataDumpRetrieve INTEGER,
serviceDataDumpCapabilityMask OCTET STRING,
serviceDataDumpInProgress INTEGER
}
serviceDataIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade service date index."
::= { bladeServiceDataEntry 1 }
serviceDataBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade ID."
::= { bladeServiceDataEntry 2 }
serviceDataBladeExists OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the blade specified exists or not."
::= { bladeServiceDataEntry 3 }
serviceDataBladePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the blade specified is powered on or not.
If the MM is experiencing a communication problem with the blade,
the state may be returned as unknown(255)"
::= { bladeServiceDataEntry 4 }
serviceDataBladeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the blade as a string."
::= { bladeServiceDataEntry 5 }
serviceDataDumpInitiate OBJECT-TYPE
SYNTAX INTEGER {
processorDump(1),
platformDump(2),
partitionDump(3),
serviceData(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiates a type of dump collection to be initiated for the blade.
NOTE: Not all blades support this, please check serviceDataDumpCapabilityMask
OID to see if the action is supported on this blade.
When the dump file is created, the node transfers it to the /tftproot/service directory
on the CMM. Only one file can be moved to this directory at a time, so please use the fileManagement
MIB information to check if the file has been completed.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladeServiceDataEntry 7 }
serviceDataDumpRetrieve OBJECT-TYPE
SYNTAX INTEGER {
processorDump(1),
platformDump(2),
partitionDump(3),
serviceData(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Retrieve a type of service data file from blade to MM.
NOTE: This OID only is valid for the last four bit mask designations listed
in the serviceDataDumpCapabilityMask OID.
The dump file is transfered to the /tftproot/service directory
on the CMM. Only one file can be moved to this directory at a time,
so please use the fileManagement MIB information to check if the file has been completed.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { bladeServiceDataEntry 8 }
serviceDataDumpCapabilityMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the blade has the capability to trigger service data and if so,
which operations are supported and whether the file can be transferred to the MM
from the blade.
The values and meanings are as follows:
0000 0000 means this blade does not support any at all.
0000 0001 means this blade supports 'processor' type and the file remains on the blade.
0000 0010 means this blade supports 'platform' type and the file remains on the blade
0000 0100 means this blade supports 'partition' type and the file remians on the blade
0000 1000 means this blade supports 'processor' type and the file can be transferred to the MM.
0001 0000 means this blade supports 'platform' type and the file can be transferred to the MM.
0010 0000 means this blade supports 'partition' type and the file can be transferred to the MM
0100 0000 means this blade supports 'serviceData' type and the file can be transferred to the MM
For example, the returned value of 01111000 means this blade supports 'processor','platform',
'partition' and 'serviceData' types, and the file can be transferred to the MM"
::= { bladeServiceDataEntry 9 }
serviceDataDumpInProgress OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
notInProgress(2),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indicator as to whether a blade dump is in progress for the specified blade.
This object ONLY applies to dumps that can be triggered by the MM and where the
dump file is transferred to the MM filesystem upon completion. See the
serviceDataDumpCapabilityMask object for support levels. The flag that this MIB object
represents will be set on when the IPMI command is sent to the blade indicating 'init dump'
and will be cleared upon receiving the valid dump file from the blade or the
creation of the text file indicating the problem encountered.
If it cannot be determined if the dump is in progress, the unknown(255) value is returned."
::= { bladeServiceDataEntry 10 }
serviceAdvisor OBJECT IDENTIFIER ::= { service 4 }
autoCallHomeSetup OBJECT IDENTIFIER ::= { serviceAdvisor 1 }
acceptLicenseAgreement OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Accept Terms and Conditions of MM Service Advisor. The user will have to accept the terms and conditions
before Service Advisor can send diagnostic data to IBM support personnel. If MM configuration
is reset to defaults, the user will have to accept the terms and conditions again before they can
enable Service Advisor.
A GET of this object may return disabled(0) or enabled(1), depending upon the current state. However,
only enabled(1) is accepted on a SET in order to accept the license agreement. A SET of disabled(0)
will return noSuchValue and is not allowed."
::= {autoCallHomeSetup 1}
serviceAdvisorEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable IBM Support. The User Agreement must be accepted and the contact information
must be set before the IBM Support function of Service Advisor can be enabled."
::= {autoCallHomeSetup 2}
serviceSupportCenter OBJECT IDENTIFIER ::= {serviceAdvisor 2}
ibmSupportCenter OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The country code for the IBM Support Center. 2 character ISO country code."
::= {serviceSupportCenter 1}
contactInformation OBJECT IDENTIFIER ::= {serviceAdvisor 3}
companyName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The organization/company name of the contact person. 1-30 characters."
::= {contactInformation 1}
contactName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the contact person.1-30 characters."
::= {contactInformation 2}
phoneNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The phone of the contact person. 5-30 characters."
::= {contactInformation 3}
emailAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The email of the contact person. It must contain '@' and dot '.' in form userid@hostname (130 characters maximum).
The userid can be alphanumeric characters, '.', '-', or '_' but must begin and end with alphanumeric characters.
The hostname can be alphanumeric characters, '.', '-', or '_'. It must contain at least two domain items.
Every domain item should begin and end with alphanumeric character, and the last domain item should be 2-20 alphabetic characters."
::= {contactInformation 4}
address OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The address of the machine location. The information in this field should be of sufficient detail to allow someone to
quickly find the chassis when necessary. 1-30 characters."
::= {contactInformation 5}
city OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The city of the machine location. 1-30 characters."
::= {contactInformation 6}
state OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The state of the machine location. 2-3 characters."
::= {contactInformation 7}
postalCode OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The postal code of the location for this system. 1-9 characters, only alphanumeric characters are valid."
::= {contactInformation 8}
phoneNumberExt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The phone number extension of the contact person. 1-30 characters."
::= {contactInformation 9}
altContactName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the alternate contact person.1-30 characters."
::= {contactInformation 10}
altPhoneNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The phone of the alternate contact person. 5-30 characters."
::= {contactInformation 11}
altPhoneNumberExt OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The phone number extension of the alternate contact person. 1-30 characters."
::= {contactInformation 12}
altEmailAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The email of the alternate contact person. It must contain '@' and dot '.' in form userid@hostname (130 characters maximum).
The userid can be alphanumeric characters, '.', '-', or '_' but must begin and end with alphanumeric characters.
The hostname can be alphanumeric characters, '.', '-', or '_'. It must contain at least two domain items.
Every domain item should begin and end with alphanumeric character, and the last domain item should be 2-20 alphabetic characters."
::= {contactInformation 13}
httpProxyConfig OBJECT IDENTIFIER ::= {serviceAdvisor 4}
httpProxyEnable OBJECT-TYPE
SYNTAX INTEGER{
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable of the HTTP Proxy. Select Enable to use the proxy for call home
connections from the MM to IBM. HTTP Proxy is used by the MM when it is not connected to the internet directly."
::= {httpProxyConfig 1}
httpProxyLocation OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Fully qualified host name or IP address of the HTTP Proxy. Maximum of 63 characters."
::= {httpProxyConfig 2}
httpProxyPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port number of the HTTP Proxy. An integer value from 1 to 65535."
::= {httpProxyConfig 3}
httpProxyUserName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User Name of the HTTP Proxy. A maximum of 30 characters string without spaces."
::= {httpProxyConfig 4}
httpProxyPassword OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Password of the HTTP Proxy. A maximum of 15 characters string without spaces."
::= {httpProxyConfig 5}
activityLogs OBJECT IDENTIFIER ::= { serviceAdvisor 5}
activityLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ActivityLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Service Advisor Activity Log entries information. This table displays the last five
events that were generated by the system or user that are called home. The entries are displayed in
reverse chronological order (most recent call home entry first). For any events that happen with same
Date/Time, only one event will be called home. If a call home event that is already in the activity
log is triggered again on the same event source, it will not be called home again unless the prior entry has
been acknowledged as corrected or 120 hours (5 days) have passed since it initially occurred and was called home. "
::= { activityLogs 1 }
activityLogEntry OBJECT-TYPE
SYNTAX ActivityLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Activity Log table entry. Each entry has the result of the FTP/TFTP Server attempt,
the event ID, event source, date and time that event occured, and a text message."
INDEX { activityLogIndex }
::= { activityLogTable 1 }
ActivityLogEntry ::= SEQUENCE {
activityLogIndex INTEGER,
activityLogString OCTET STRING,
activityLogAcknowledge INTEGER,
activityLogAttribute OCTET STRING
}
activityLogIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Activity Log index number.
For consistent results, view as a table and not as individual entries."
::= { activityLogEntry 1 }
activityLogString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing one Activity Log entry. The text message is from the original entry in the event log.
For consistent results, view as a table and not as individual entries."
::= { activityLogEntry 2 }
activityLogAcknowledge OBJECT-TYPE
SYNTAX INTEGER{
no(0),
yes(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The acknowledgement of one Activity Log entry as corrected. This field allows the users to set a reminder next to
certain events to indicate their awareness of the issue. Checking the acknowledge flag will not cause the event to be removed
from the log. This log is not cleared, so the acknowledge flag can be used to indicate a problem can be ignored. This field
can be also used to override the 120 hour (5 day) filtering of reports via FTP/TFTP Server of Service Data."
::= { activityLogEntry 3 }
activityLogAttribute OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string of data detailing one Activity Log entry's attribute. Status PENDING indicates that the system
is preparing for the event to be called home by collecting data about the systems state. A SUCCESS state
indicates that the problem was successfully transmitted to FTP/TFTP Server. The FAILED state indicates that the attempt
to transmit the event information was not successful. Additional information may be found in the Event Log.
The event ID, event source , date and time are all information from the original entry in the event log.
The acknowledged as corrected field is a reminder to certain events to indicate their awareness of the issue."
::= { activityLogEntry 4 }
-- ********************************************************************************
-- autoftp
-- ********************************************************************************
--
autoFTPSetup OBJECT IDENTIFIER ::= { service 5 }
autoFTPCallMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
ftp(1),
tftp(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies the automated problem reporting mode. Automated problem reporting mode allows the MM to automatically put
service data to a specified server when a call home event is detected. For any call home events that happen with same Date/Time,
only one event will be reported. The system will also wait for an interval of 120 hours (5 days) before another identical event
can be sent for the same failed component."
::= { autoFTPSetup 1 }
autoFTPCallAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies the remote server address of FTP and TFTP. It should be fully qualified hostname or IP address."
::= { autoFTPSetup 2 }
autoFTPCallPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies the port on remote FTP/TFTP server for data transmission."
::= { autoFTPSetup 3 }
autoFTPCallUserID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies the user account to login remote FTP server."
::= { autoFTPSetup 4 }
autoFTPCallPassword OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies the password to login remote FTP server."
::= { autoFTPSetup 5 }
-- ********************************************************************************
-- Call Home Exclusion List
-- ********************************************************************************
callHomeExclusionEvents OBJECT IDENTIFIER ::= { service 6}
readCallHomeExclusionEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF ReadCallHomeExclusionEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Call Home Exclusion Event entries information."
::= { callHomeExclusionEvents 1 }
readCallHomeExclusionEventEntry OBJECT-TYPE
SYNTAX ReadCallHomeExclusionEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Call Home Exclusion Event table entry"
INDEX { readCallHomeExclusionEventIndex }
::= { readCallHomeExclusionEventTable 1 }
ReadCallHomeExclusionEventEntry::= SEQUENCE {
readCallHomeExclusionEventIndex INTEGER,
readCallHomeExclusionEventID OCTET STRING
}
readCallHomeExclusionEventIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index number of one Call Home Exclusion Event.
For consistent results, view as a table and not as individual entries."
::= { readCallHomeExclusionEventEntry 1 }
readCallHomeExclusionEventID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Event ID of one Call Home Exclusion Event entry.
For consistent results, view as a table and not as individual entries."
::= { readCallHomeExclusionEventEntry 2 }
addCallHomeExclusionEvent OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Add one call home Event ID into the Call Home Exclusion List.
The Event ID is an 8-digit hexadecimal number (0-F) with an optional prefix of '0x' or '0X'.
An Event can not be added into the exclusion list if autoFtpMode is disabled.
If Service Advisor Terms and Conditions are accepted, an event can be added into the exclusion list.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { callHomeExclusionEvents 2}
rmCallHomeExclusionEvent OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remove one call home Event ID from the Call Home Exclusion List.
The Event ID is an 8-digit hexadecimal number (0-F) with an optional prefix of '0x' or '0X'.
An event on the exclusion list can not be removed if autoFtpMode is disabled.
If Service Advisor Terms and Conditions are accepted, an event on the exclusion list can be removed.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { callHomeExclusionEvents 3}
rmAllCallHomeExclusionEvent OBJECT-TYPE
SYNTAX INTEGER {
execute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remove all Event IDs from the Call Home Exclusion List.
Events on the exclusion list can not be removed if autoFtpMode is disabled.
If Service Advisor Terms and Conditions are accepted, events on the exclusion list can be removed.
NOTE: Value returned for the GET command is meaningless for this MIB object."
::= { callHomeExclusionEvents 4}
-- ********************************************************************************
-- Component Service Reset
-- ********************************************************************************
componentPowerServiceReset OBJECT IDENTIFIER ::= { service 10 }
bladePowerServiceResetTable OBJECT-TYPE
SYNTAX SEQUENCE OF BladePowerServiceResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table providing aux power status and the ability
to perform a virtual reseat or hard restart of a blade."
::= { componentPowerServiceReset 1 }
bladePowerServiceResetEntry OBJECT-TYPE
SYNTAX BladePowerServiceResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Blade power service reset entry"
INDEX { bladePowerServiceResetIndex }
::= { bladePowerServiceResetTable 1 }
BladePowerServiceResetEntry ::= SEQUENCE {
bladePowerServiceResetIndex INTEGER,
bladePowerServiceResetBladeId INTEGER,
bladePowerServiceResetStatus INTEGER,
bladePowerServiceResetCmd INTEGER
}
bladePowerServiceResetIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Blade power service reset index."
::= { bladePowerServiceResetEntry 1 }
bladePowerServiceResetBladeId OBJECT-TYPE
SYNTAX INTEGER {
blade1(1),
blade2(2),
blade3(3),
blade4(4),
blade5(5),
blade6(6),
blade7(7),
blade8(8),
blade9(9),
blade10(10),
blade11(11),
blade12(12),
blade13(13),
blade14(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The numeric blade slot number."
::= { bladePowerServiceResetEntry 2 }
bladePowerServiceResetStatus OBJECT-TYPE
SYNTAX INTEGER {
auxPowerOff(0),
auxPowerOn(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the aux power. A value of auxPowerOff(0) indicates
that the blade aux power is off. A value of
auxPowerOn(1) indicates that the blade aux power is on."
::= { bladePowerServiceResetEntry 3 }
bladePowerServiceResetCmd OBJECT-TYPE
SYNTAX INTEGER {
noOperation(0),
resetVirtualReseatOperation(1),
resetHardRestartOperation(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"NOTE: Do not perform this service reset operation on a node that is
currently in a maintenance mode state. See bladeHealthState in
bladeSystemStatusTable for maintMode(12) value.
To reset the auxiliary power on a blade component, set this object to
resetVirtualReseatOperation(1). This will toggle the auxiliary
power to the blade and simulate a physical removal and insertion.
During the operation, auxiliary power is removed from the component
and is then restored. For nodes, the power state will remain off and the
user will need to manually power on the node.
To perform a hard restart on the blade component, set this object to
resetHardRestartOperation(2). This will toggle the reset line to the
service processor causing it to re-initialize. The service processor on
the component is directly reset, but the power state of the component
will not be affected by this operation.
This object is intended to be write-only.
The component will experience a temporary loss of communication and the power
state will change. Prior to executing this action, perform any operations needed
to protect user data.
Reading this object will always return the value of noOperation(0)."
::= { bladePowerServiceResetEntry 4 }
smPowerServiceResetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmPowerServiceResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table providing aux power status and the ability
to perform a virtual reseat or hard restart of a switch."
::= { componentPowerServiceReset 2 }
smPowerServiceResetEntry OBJECT-TYPE
SYNTAX SmPowerServiceResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Switch module power service reset entry"
INDEX { smPowerServiceResetIndex }
::= { smPowerServiceResetTable 1 }
SmPowerServiceResetEntry ::= SEQUENCE {
smPowerServiceResetIndex INTEGER,
smPowerServiceResetSwitchId INTEGER,
smPowerServiceResetStatus INTEGER,
smPowerServiceResetCmd INTEGER
}
smPowerServiceResetIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Switch module power service reset index."
::= { smPowerServiceResetEntry 1 }
smPowerServiceResetSwitchId OBJECT-TYPE
SYNTAX INTEGER {
switch1(1),
switch2(2),
switch3(3),
switch4(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch module numeric identifier."
::= { smPowerServiceResetEntry 2 }
smPowerServiceResetStatus OBJECT-TYPE
SYNTAX INTEGER {
auxPowerOff(0),
auxPowerOn(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the aux power power. A value of auxPowerOff(0) indicates
that the switch aux power is off. A value of
auxPowerOn(1) indicates that the switch aux power is on."
::= { smPowerServiceResetEntry 3 }
smPowerServiceResetCmd OBJECT-TYPE
SYNTAX INTEGER {
noOperation(0),
resetVirtualReseatOperation(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To reset the auxiliary power on a switch component, set this object to
resetVirtualReseatOperation(1). This will toggle the auxiliary
power to the switch and simulate a physical removal and insertion.
During the operation, auxiliary power is removed from the component
and is then restored. For IOMs, the power state will be on after the
operation completes.
To perform a hard restart on the switch component, set this object to
resetHardRestartOperation(2). This will toggle the reset line to the
service processor causing it to re-initialize. The service processor on
the component is directly reset, but the power state of the component
will not be affected by this operation.
This object is intended to be write-only.
The component will experience a temporary loss of communication and the power
state will change. Prior to executing this action, perform any operations needed
to protect user data.
Reading this object will always return the value of noOperation(0)."
::= { smPowerServiceResetEntry 4 }
-- ********************************************************************************
-- Component Service Data params
-- ********************************************************************************
componentServiceData OBJECT IDENTIFIER ::= { service 15 }
componentServiceDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComponentServiceDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of component service data information."
::= { componentServiceData 1 }
componentServiceDataEntry OBJECT-TYPE
SYNTAX ComponentServiceDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Component service data entry"
INDEX { componentServiceDataTopologyPath }
::= { componentServiceDataTable 1 }
ComponentServiceDataEntry ::= SEQUENCE {
componentServiceDataTopologyPath OCTET STRING,
componentServiceDataComponentName OCTET STRING,
componentServiceDataDumpInitiate INTEGER,
componentServiceDataDumpRetrieve INTEGER,
componentServiceDataDumpCapabilityMask OCTET STRING,
componentServiceDataDumpInProgress INTEGER,
componentServiceDataStatus INTEGER,
componentServiceDataStatusDetails OCTET STRING
}
componentServiceDataTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { componentServiceDataEntry 1 }
componentServiceDataComponentName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the component as a null terminated string."
::= { componentServiceDataEntry 2 }
componentServiceDataDumpInitiate OBJECT-TYPE
SYNTAX INTEGER {
processorDump(1),
platformDump(2),
partitionDump(3),
serviceData(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiates a type of dump collection to be initiated for the component and sent to the MM.
NOTE: Not all components support this, please check componentServiceDataDumpCapabilityMask
OID to see if the action is supported on this component.
For switch modules the serviceData(4) is the only available value that can be set.
When the dump file is created, the node transfers it to the /tftproot/service directory
on the CMM. Only one file can be moved to this directory at a time, so please use the fileManagement
MIB information to check if the file has been completed.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { componentServiceDataEntry 3 }
componentServiceDataDumpRetrieve OBJECT-TYPE
SYNTAX INTEGER {
processorDump(1),
platformDump(2),
partitionDump(3),
serviceData(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Retrieve a type of service data file from component to MM.
NOTE: This OID only is valid for the last four bit mask designations listed
in the componentServiceDataDumpCapabilityMask OID.
NOTE: This OID is not used for switch modules.
The dump file is transfered to the /tftproot/service directory
on the CMM. Only one file can be moved to this directory at a time,
so please use the fileManagement MIB information to check if the file has been completed.
NOTE: Value returned for the GET command is meaningless
for this MIB object."
::= { componentServiceDataEntry 4 }
componentServiceDataDumpCapabilityMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the component has the capability to trigger service data and if so,
which operations are supported and whether the file can be transferred to the MM
from the component.
The values and meanings are as follows:
0000 0000 means this component does not support any at all.
0000 0001 means this component supports 'processor' type and the file remains on the component.
0000 0010 means this component supports 'platform' type and the file remains on the component.
0000 0100 means this component supports 'partition' type and the file remians on the component.
0000 1000 means this component supports 'processor' type and the file can be transferred to the MM.
0001 0000 means this component supports 'platform' type and the file can be transferred to the MM.
0010 0000 means this component supports 'partition' type and the file can be transferred to the MM
0100 0000 means this component supports 'serviceData' type and the file can be transferred to the MM
For example, the returned value of 01111000 means this component supports 'processor','platform',
'partition' and 'serviceData' types, and the file can be transferred to the MM"
::= { componentServiceDataEntry 5 }
componentServiceDataDumpInProgress OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
notInProgress(2),
unknown(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indicator as to whether a component dump is in progress for the specified component.
This object ONLY applies to dumps that can be triggered by the MM and where the
dump file is transferred to the MM filesystem upon completion. See the
componentServiceDataDumpCapabilityMask object for support levels. The flag that this MIB object
represents will be set on when the IPMI command is sent to the component indicating 'init dump'
and will be cleared upon receiving the valid dump file from the component or the
creation of the text file indicating the problem encountered.
If it cannot be determined if the dump is in progress, the unknown(255) value is returned."
::= { componentServiceDataEntry 6}
componentServiceDataStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A status indicator for dump progress. This object ONLY applies to switch modules dumps."
::= { componentServiceDataEntry 7}
componentServiceDataStatusDetails OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The failure status as a null terminated string. This object ONLY applies to switch modules dumps."
::= { componentServiceDataEntry 8}
-- *************************************************************************
-- componentServiceDataTableCacheTimeout
-- *************************************************************************
componentServiceDataTableCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The timeout value (in seconds) of the cached data for the
table, componentServiceDataTable.
This value is static (constant) and cannot be set."
::= { componentServiceData 2 }
-- ********************************************************************************
-- FFDC Service Data Generation and Download
-- ********************************************************************************
downloadMMServiceData OBJECT IDENTIFIER ::= { service 21 }
downloadMMServiceDataFileCreateAndDownload OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifying this string initiates the generation of the FFDC
(First-Failure Data Capture) data collection (compressed
group of files) for the CMM and the download of this file to the
specified destination.
The destination is a string of chars that specifies the
remote location of service data to be saved. Use one of the
following protocols: sftp, tftp, ftp, http or https.
An example of a qualified location can be:
<protocol>://[<user>[:password][;fingerprint=<host>]@]<host>
[:<port>]/<path>/<to>/<file>
Note: It is recommended that the saved-data filename have an
extension of .tgz to allow support personnel to identify the file.
Reading this string will always return 'Not readable' since
this string may contain a password."
::= { downloadMMServiceData 1 }
downloadMMServiceDataStatus OBJECT-TYPE
SYNTAX INTEGER {
ready(0),
fileGenerationInProgress(1),
fileDownloadInProgress(2),
cancelingDownload(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indicator as to whether the FFDC generation and download
is in progress. To initiate this process, set the object,
downloadMMServiceDataFileCreateAndDownload (see the
object's description for details)."
::= { downloadMMServiceData 2}
downloadMMServiceDataResult OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permissionFailed(1),
fileGenerationFailed(2),
fileDownloadFailed(3),
canceled(4),
complete(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An indicator as to whether the FFDC generation and download
was successful.
The FFDC generation and download is started by setting a
destination filename with the object,
downloadMMServiceDataFileCreateAndDownload.
If the FFDC file generation and download process completes
successfully, this object is set to complete(5).
If the process encounters an error, this object is set to
either: permissionFailed(1), fileGenerationFailed(2) or
fileDownloadFailed(3).
If the process is canceled by the user, this object will be set
to canceled(4).
A value of none(0) is the default value. This object may be
set to none(0) if the object, downloadMMServiceDataStatus,
has a value of ready(0). Setting this object to any value other
than none(0) will report an error."
::= { downloadMMServiceData 3}
downloadMMServiceDataCancelDownload OBJECT-TYPE
SYNTAX INTEGER {
none(0),
cancel(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to 'cancel(1)' to stop the FFDC file download
process. 'cancel(1)' is the only valid value that may be set.
The value of this object will be 'cancel(1)' if an user has
set this value and an active FFDC download is in progress. After
the process has been canceled, this object will automatically
be set to 'none(0)'."
::= { downloadMMServiceData 4}
-- This group of objects provides information specific to scaling blades
scaling OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 24 }
-- *************************************************************************
-- Scalable Complex Information
-- *************************************************************************
scalableComplexTable OBJECT-TYPE
SYNTAX SEQUENCE OF ScalableComplexEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of scalable complex information. This table provides information
related to the scalable complexes installed in the chassis."
::= { scaling 1 }
scalableComplexEntry OBJECT-TYPE
SYNTAX ScalableComplexEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Scalable complex information."
INDEX { scalableComplexTopologyPath }
::= { scalableComplexTable 1 }
ScalableComplexEntry ::= SEQUENCE {
scalableComplexTopologyPath OCTET STRING,
scalableComplexIdentifier INTEGER,
scalableComplexNodeName OCTET STRING,
scalableComplexNodeHealthState INTEGER,
scalableComplexNodePowerState INTEGER,
scalableComplexNodeResources OCTET STRING
}
scalableComplexTopologyPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a component. The path to a particular
component consists of one or more <component>,<instance> pairs, where
each successive pair is a child of the previous parent pair.
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
This component table is indexed by this unique topology
path and the numeric designations for the components are:
CHASSIS, 0x01 Chassis
MM, 0x02 Management Module
BLADE, 0x03 Main system board of a blade
POWER, 0x04 Power Supply, Power Module, etc
COOLING, 0x05 Fan, blower, or other cooling device
IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
MEDIA, 0x07 Media device
PROCESSOR, 0x08 Any processor, processor module, etc
STORAGE, 0x09 Any type of storage device
EXPANSION, 0x0A Expansion Card (not covered by more specific type)
MEMORY, 0x0B Any memory device, module, etc
MFRU, 0x0C Managed FRU Device
PANEL, 0x0D Any sort of panel device, such as a front panel
BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
INTERPOSER, 0x11 Interposer device
CLOCK, 0x12 Clock card
MUX, 0x13 Mulitplexer card
ADDIN, 0x14 cKVM card & other addin cards
STORAGE_MODULE, 0x15 Container of one or more Storage Devices
SYS_EXPANSION_CARD, 0x16 Management card
BATTERY, 0x17 A single battery
BATTERY_MODULE, 0x18 Container of one or more batteries
REAR_LED, 0x19 Rear LED card
MEMORY_BANK, 0x1A Memory banks
AIR_FILTER, 0x1B Filter mechanism (bezel)
SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
PARENT, 0x1D Reference to parent for multi-parent support
PHY_PORT, 0x1E Physical port
IO_EXPANDER, 0x1F RAID card
CABLE, 0x20 Cable/Interconnect
FAN_MUX 0x29 Fan multiplexer card
PCI_EXPRESS, 0x32 PCI express card on (PEN)
FLASH_DIMM, 0x33 Used for SPD devices that matches the silkscreen of the DIMM slot
RACK, 0x50 Rack
PLATFORM, 0x51 Generic Platform like rack mounted server/appliance
DATAPLEX, 0x52 DataPlex
OTHER, 0x53 Other unknown etc.
PERIPHERAL_MODULE, 0x54
SYSTEM_BOARD, 0x55 System board
PROCESSOR_MODULE, 0x56
BACK_PANEL, 0x57
POWER_SYSTEM_BOARD, 0x58
STORAGE_BACKPLANE, 0x59 Drive back plane
PROC_BOARD, 0x5A Holds 1 or more processors
POWER_DI, 0x5B Power mgt / power distribution board
CHASSIS_BACK_PANEL, 0x5C
SUB_CHASSIS, 0x5D
OTHER_CHASSIS_BOARD, 0x5E
DEVICE_MODULE, 0x5F
REMOTE_DEVICE, 0x60 Remote mgt communication device
EXTERNAL_ENVIRONMENT, 0x61 Such as external temp sensor for outside box temps
PROC_MEMORY_MODULE, 0x62 Processors and memory on same module"
::= { scalableComplexEntry 1 }
scalableComplexIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique numeric identifier for a complex installed in the chassis."
::= { scalableComplexEntry 2 }
scalableComplexNodeName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the node as a null terminated string."
::= { scalableComplexEntry 3 }
scalableComplexNodeHealthState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
good(1),
warning(2),
critical(3),
kernelMode(4),
discovering(5),
commError(6),
noPower(7),
flashing(8),
initFailure(9),
insufficientPower(10),
powerDenied(11),
maintMode(12),
firehoseDump(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system health state for the component.
Unknown: Component is in an undefined state.
Good: Component is operating normally.
Warning: One or more outstanding warnings exist for this component.
Critical: One or more outstanding critical events for this component.
Kernel Mode: Component is in kernel mode.
Discovering: The MM is currently in the process of discovering this component.
Communications Error: The MM failed to communicate with this component.
No Power: No power to the component's domain.
Flashing: Flashing in progress.
Initialization Failure: Component failed to initialized.
Insufficient Power: Not enough power is left in the component's domain to power the component.
Power Denied: Power was denied to the component.
Maintenance Mode: Node is undergoing a service operation and should not be updated or powered on/off.
Firehose Dump: Node is undergoing a storage save operation and should not be udpated or powered on/off"
::= { scalableComplexEntry 4 }
scalableComplexNodePowerState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
standby(3),
hibernate(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the power state of the node."
::= { scalableComplexEntry 5 }
scalableComplexNodeResources OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string providing a summary overview of the resources provided by this node."
::= { scalableComplexEntry 6 }
END
Reference in a new issue View git blame Copy permalink