graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/hp/HP-ICF-BASIC
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1991 lines
82 KiB
Text
Raw Permalink Blame History

HP-ICF-BASIC DEFINITIONS ::= BEGIN
IMPORTS
Integer32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MacAddress, TruthValue, RowStatus, DisplayString,
TDomain, TAddress, StorageType, TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
entLogicalIndex
FROM ENTITY-MIB
alarmEntry, eventEntry
FROM RMON-MIB
InetAddress, InetAddressType, InetAddressPrefixLength,
InetPortNumber
FROM INET-ADDRESS-MIB
hpicfObjectModules, hpicfCommon, hpicfCommonTrapsPrefix
FROM HP-ICF-OID
snmpTargetAddrEntry
FROM SNMP-TARGET-MIB;
hpicfBasicMib MODULE-IDENTITY
LAST-UPDATED "200706070000Z" -- June 7, 2007
ORGANIZATION "Hewlett Packard Company,
Network Infrastructure Solutions"
CONTACT-INFO "Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module describes objects for basic
management of devices in the HP Integrated
Communication Facility product line."
REVISION "200709130000Z" -- Sept 13, 2007
DESCRIPTION "Limit the size to 1300 for the hpicfBannerMOTD."
REVISION "200706070000Z" -- June 7, 2007
DESCRIPTION "Added hpicfIpConfigLocalProxyArp object to the
the hpicfIpConfigEntry sequence."
REVISION "200705300954Z" -- May 30, 2007
DESCRIPTION "Added the hpicfTelnet6Enable object."
REVISION "200511170000Z" -- November 17, 2005
DESCRIPTION "Added hpicfBasicDNSConfig object group to
the HP ICF Basic Group. Updated conformance and
compliences objects."
REVISION "200301090108Z" -- January 9, 2003
DESCRIPTION "Changed the default value for
hpicfSnmpTargetAddrLogFilter to 1."
REVISION "200210100401Z" -- October 10, 2002
DESCRIPTION "Added hpicfSnmpTargetAddrLogFilter for to add
log filtering in snmpTargetAddrTable. Added
conformance group hpicfSnmpTargetAddrLogFilterGroup.
Deprecated hpicfTrapDestTable. Deprecated
hpicfBasicCompliance3 and replaced it
with hpicfBasicCompliance4."
REVISION "200011140401Z" -- November 14, 2000
DESCRIPTION "Added proxy ARP and secondary IP address
configuration objects."
REVISION "200011030511Z" -- November 3, 2000
DESCRIPTION "Deprecated per-entity announce object and
hpicfIfToEntity table and replaced with
hpicfAnnounceDiscoveryTable, indexed by
ifIndex. Replaced per-interface default
gateway with global default gateway."
REVISION "9710210300Z" -- October 21, 1997
DESCRIPTION "Added the hpicfWebAgentEnable object."
REVISION "9703060331Z" -- March 6, 1997
DESCRIPTION "Fixed some typos in compliances. Added
NOTIFICATION-GROUP information."
REVISION "9609100221Z" -- September 10, 1996
DESCRIPTION "Split this MIB module from the former monolithic
hp-icf MIB. Added the announce table. Added
per-interface IP and IPX config. Added trap
destination table and fixed trap table."
REVISION "9507130000Z" -- July 13, 1995
DESCRIPTION "Added the hpicfTelnetEnable object."
REVISION "9501180000Z" -- January 18, 1995
DESCRIPTION "Initial version of this MIB module. Consisted of
the hpicfReset and hpicfSelfTest objects."
REVISION "9501180000Z" -- April 12, 2004
DESCRIPTION "Added the hpicfIpZeroBroadcastEnable object."
::= { hpicfObjectModules 5 }
-- The HP ICF Basic Group
hpicfBasic OBJECT IDENTIFIER ::= { hpicfCommon 4 }
hpicfReset OBJECT-TYPE
SYNTAX INTEGER {
noReset(1),
normalReset(2),
-- (3) is no longer used
agentReset(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When this object is set to to 'normalReset' it
results in a 'powerup' reset of the device. When
set to 'agentReset', it results in a reset of the
agent software, without resetting the device
hardware. When this object is set, the agent
replies, dallies a short time to allow the reply
to be emitted from the device, then performs the
reset. When read, this object always returns
'noReset'."
::= { hpicfBasic 1 }
hpicfSelfTest OBJECT-TYPE
SYNTAX INTEGER {
stSuccess(1),
stExecute(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Self test is invoked by setting this flag to
'stExecute'. When the object changes to 'stSuccess',
the test has completed successfully."
::= { hpicfBasic 2 }
hpicfTelnetEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When the value of this object is 'enabled(1)', the
telnet server on this agent is running and allowed to
accept connections. When the value of this object is
'disabled(2)', no incoming telnet connections will be
accepted by this agent. Whether the telnet server
continues running when this object is set to
'disabled(2)' is implementation dependent."
::= { hpicfBasic 3 }
hpicfConfigClear OBJECT-TYPE
SYNTAX INTEGER {
running(1),
configClear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When this object is set to 'configClear', the agent
replies, dallies a short time to allow the reply to
be emitted from the device, clears all of its
nonvolitile parameters back to their factory
defaults then resets the device. Note that this
will result in all parameters being cleared,
including network configuration. This function
should be used with extreme caution.
When read, this object always returns 'running'."
::= { hpicfBasic 4 }
hpicfSelfTestResult OBJECT IDENTIFIER ::= { hpicfBasic 5 }
hpicfSelfTestResultCode OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
softFailure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the value of this object is 'softFailure', the
agent is up and running, but has detected a
non-critical failure. The value of the
hpicfSelfTestResultText will contain further
information about the type of failure that was
detected and may contain information about how to
remedy the situation."
::= { hpicfSelfTestResult 1 }
hpicfSelfTestResultText OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the value of the hpicfSelfTestResultCode object
is 'softFailure', this text string contains detailed
information about the most recently detected failure,
including information about the type of failure that
was detected, and possibly information about how to
remedy the situation. If the value of the
hpicfSelfTestResultCode object is 'ok', this object
will contain a zero-length octet string."
::= { hpicfSelfTestResult 2 }
hpicfSelfTestResultTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains the value of sysUpTime at the
time the agent detected the failure currently being
reported by hpicfSelfTestResultCode and
hpicfSelfTestResultText. If the value of the
hpicfSelfTestResultCode is 'ok', or if the current
failure was detected before the SNMP agent
initialized, this object will have the value 0."
::= { hpicfSelfTestResult 3 }
hpicfWebAgentEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When the value of this object is 'enabled(1)', the
ehttpd server on this agent is running and allowed to
accept connections. When the value of this object is
'disabled(2)', no incoming ehttpd connections will be
accepted by this agent. Whether the ehttpd server
continues running when this object is set to
'disabled(2)' is implementation dependent."
::= { hpicfBasic 6 }
hpicfBasicDiscovery OBJECT IDENTIFIER ::= { hpicfBasic 7 }
hpicfAnnounceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfAnnounceEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
A table of per-device network announcement
addresses. This table is used to cause the
transmission of announcement packets for a
particular logical device to a specified address.
This is used as part of topology mapping to
determine the network connectivity of a device on
the network."
::= { hpicfBasicDiscovery 1 }
hpicfAnnounceEntry OBJECT-TYPE
SYNTAX HpicfAnnounceEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
A row in the table, containing the announcement
address for a single entity."
INDEX { entLogicalIndex }
::= { hpicfAnnounceTable 1 }
HpicfAnnounceEntry ::=
SEQUENCE {
hpicfAnnounceAddress MacAddress
}
hpicfAnnounceAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
Seting an instance of this object to any MAC
address will trigger the agent to transmit three
announcement packets on an interface associated
with the logical entity. These packets will use a
MAC source address set to the agent's MAC address
on that interface, a MAC destination address equal
to the value of the instance of this object,
a destination LSAP of 0xF8, and a destination HP
XSAP of 0x165d."
::= { hpicfAnnounceEntry 1 }
hpicfIfToEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIfToEntityEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
This table is used to map an interface index to a
logical entity index. This table is mainly used
by autodiscovery to figure out which entLogicalIndex
corresponds to a particular network address. This
table is not intended as a general purpose mapping.
In particular, in some systems the same interface
can be in use by multiple logical entities. Also,
there is no requirement that ifIndex is unique
across all logical entities (such as the case where
multiple agents in the same chassis each assign
ifIndex without knowledge of how the other agents
are assigning ifIndex). Therefore, these mappings
are only defined to hold for the special purpose
of getting from the discovered transport address for
a logical device to the entLogicalIndex needed for
announce address and search address. Also, note
that this table will not contain entries for all
of the values of ifIndex. It will only contain
entries for interfaces that can be used for sending
announcement packets for some logical entity."
::= { hpicfBasicDiscovery 2 }
hpicfIfToEntityEntry OBJECT-TYPE
SYNTAX HpicfIfToEntityEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
A row in the table, containing the ifIndex to
entLogicalIndex mapping for a single interface."
INDEX { ifIndex }
::= { hpicfIfToEntityTable 1 }
HpicfIfToEntityEntry ::=
SEQUENCE {
hpicfIfEntLogicalIndex Integer32
}
hpicfIfEntLogicalIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
This object identifies the entLogicalIndex of a
device that can be mapped using this interface. An
entLogicalEntry identified by a value of an instance
of this object is the same entry identified by the
same value of an instance of entLogicalIndex."
::= { hpicfIfToEntityEntry 1 }
hpicfAnnounceDiscoveryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfAnnounceDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table of per-device network announcement
addresses. This table is used to cause the
transmission of announcement packets for a
particular logical device to a specified address.
This is used as part of topology mapping to
determine the network connectivity of a device on
the network."
::= { hpicfBasicDiscovery 3 }
hpicfAnnounceDiscoveryEntry OBJECT-TYPE
SYNTAX HpicfAnnounceDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the table, containing the announcement
address for a single entity."
INDEX { ifIndex }
::= { hpicfAnnounceDiscoveryTable 1 }
HpicfAnnounceDiscoveryEntry ::=
SEQUENCE {
hpicfAnnounceDiscoveryAddress MacAddress
}
hpicfAnnounceDiscoveryAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Seting an instance of this object to any MAC
address will trigger the agent to transmit three
announcement packets on an interface associated
with the logical entity. These packets will use a
MAC source address set to the agent's MAC address
on that interface, a MAC destination address equal
to the value of the instance of this object,
a destination LSAP of 0xF8, and a destination HP
XSAP of 0x165d."
::= { hpicfAnnounceDiscoveryEntry 1 }
hpicfBasicIpConfig OBJECT IDENTIFIER ::= { hpicfBasic 8 }
hpicfIpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
This table contains per-interface IP configuration
information."
::= { hpicfBasicIpConfig 1 }
hpicfIpConfigEntry OBJECT-TYPE
SYNTAX HpicfIpConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
An entry in the hpicfIpConfigTable containing the IP
configuration information for a single interface."
INDEX { ifIndex }
::= { hpicfIpConfigTable 1 }
HpicfIpConfigEntry ::=
SEQUENCE {
hpicfIpConfigAddress IpAddress,
hpicfIpConfigAddrMask IpAddress,
hpicfIpConfigDefaultRouter IpAddress,
hpicfIpConfigPingRouter TruthValue,
hpicfIpConfigMtu Integer32,
hpicfIpConfigAdminStatus INTEGER,
hpicfIpConfigProxyArp INTEGER,
hpicfIpConfigLocalProxyArp INTEGER
}
hpicfIpConfigAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
This variable contains the IP address for this
interface."
::= { hpicfIpConfigEntry 1 }
hpicfIpConfigAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
This variable contains the IP subnet mask for
this interface."
::= { hpicfIpConfigEntry 2 }
hpicfIpConfigDefaultRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
This variable contains the IP address of the
default router for this interface. For SLIP
interfaces, this object contains the IP address
of the node at the other end of the serial
connection."
::= { hpicfIpConfigEntry 3 }
hpicfIpConfigPingRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
This object is used to configure whether this agent
will periodically send ICMP echo request packets to
the IP default router for this interface. Since a
networking device typically does not transmit unless
it receives a management request, and since some
autodiscovery applications work by scanning ARP
caches, this ICMP echo can be used to try to stay in
our default router's ARP cache so that we can be
discovered. This object allows the network manager
to enable or disable sending these ICMP echo
requests."
::= { hpicfIpConfigEntry 4 }
hpicfIpConfigMtu OBJECT-TYPE
SYNTAX Integer32 (68..65535)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
This object is used to configure the largest
datagram that IP will send on this interface. Note
that for some interface types, this value may not
be changeable, and this object will be implemented
as read-only on those interfaces. Also note that
most interfaces will not allow the full range of
values defined above, since the upper limit on the
MTU is constrained by the interface type."
::= { hpicfIpConfigEntry 5 }
hpicfIpConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
useConfigured(2),
learn(3)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
Setting this flag to 'learn' (the default) will
clear any existing IP address configuration for
this interface, and will cause the device to use a
dynamic method (e.g. BootP) to obtain its IP
configuration for this interface. This flag must be
set to 'useConfigured' in order to configure an IP
address for the interface. Setting this flag to
'disable' will disable the IP protocol stack on this
interface."
::= { hpicfIpConfigEntry 6 }
hpicfIpConfigProxyArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
Enables/disables ARP proxy on the interface. If set
to enabled(1), the switch will respond on ARP request
for IP addresses from other subnets."
::= { hpicfIpConfigEntry 7 }
hpicfIpConfigLocalProxyArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
Enables/disables local ARP proxy on the interface. If set
to enabled(1), the switch will respond on ARP request
for IP addresses from local subnets."
::= { hpicfIpConfigEntry 8 }
-- IP secondary addresses
hpicfIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpAddrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
A table that contains the secondary addresses
configured for an interface."
::= { hpicfBasicIpConfig 2 }
hpicfIpAddrEntry OBJECT-TYPE
SYNTAX HpicfIpAddrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
Information about a secondary IP address assigned
to an interface."
INDEX { ifIndex,
hpicfIpAddrAddr }
::= { hpicfIpAddrTable 1 }
HpicfIpAddrEntry ::=
SEQUENCE {
hpicfIpAddrAddr IpAddress,
hpicfIpAddrMask IpAddress,
hpicfIpAddrStatus RowStatus
}
hpicfIpAddrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
The secondary IP address."
::= { hpicfIpAddrEntry 1 }
hpicfIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
The subnet mask for the address. If not specified
at the time of row creation, defaults to the
class-based netmask for the address."
::= { hpicfIpAddrEntry 2 }
hpicfIpAddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
The status of an IP Address entry."
::= { hpicfIpAddrEntry 3 }
-- Global default gateway config objects
hpicfIpGlobalDefaultRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable contains the IP address of the
default router for this system. The value of
this object is ignored when ipForwarding is
equal to 'forwarding'. This object is only used
when hpicfIpGlobalDefaultRouterSource is 'manual'.
Note that a configured static route to address
0.0.0.0 takes precedence over the value of this
object."
::= { hpicfBasicIpConfig 3 }
hpicfIpGlobalPingRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is used to configure whether this
device will periodically send ICMP echo request
packets to its IP default router. Since a
networking device typically does not transmit
unless it receives a management request, and since
some autodiscovery applications work by scanning
ARP caches, this ICMP echo can be used to try to
stay in our default router's ARP cache so that we
can be discovered. This object allows the network
manager to enable or disable sending these ICMP echo
requests. The value of this object is ignored when
ipForwarding is equal to 'forwarding'."
::= { hpicfBasicIpConfig 4 }
hpicfIpZeroBroadcastEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is used to configure whether switch
should silently discard on receipt any packet
addressed to 0.0.0.0 or {<Network>, 0}.If these
packets are not silently discarded, they must be
treated as IP broadcasts.This object is by default
configured to discard zero broadcast packet"
::= { hpicfBasicIpConfig 5 }
hpicfBasicIpxConfig OBJECT IDENTIFIER ::= { hpicfBasic 9 }
hpicfIpxConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpxConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains IPX per-interface configuration
information that will take effect after the next
reset of the device."
::= { hpicfBasicIpxConfig 1 }
hpicfIpxConfigEntry OBJECT-TYPE
SYNTAX HpicfIpxConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the hpicfIpxConfigTable containing the
IPX configuration information for a single
interface."
INDEX { ifIndex }
::= { hpicfIpxConfigTable 1 }
HpicfIpxConfigEntry ::=
SEQUENCE {
hpicfIpxConfigNodeAddress MacAddress,
hpicfIpxConfigDefaultRouter MacAddress,
hpicfIpxConfigRouterEncaps INTEGER,
hpicfIpxConfigAdminStatus INTEGER
}
hpicfIpxConfigNodeAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPX node address that the agent will use for
this interface. Note that in many, but not all,
cases, this object duplicates the value of
ifPhysAddress."
::= { hpicfIpxConfigEntry 1 }
hpicfIpxConfigDefaultRouter OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IPX node address of the default router for
this interface."
::= { hpicfIpxConfigEntry 2 }
hpicfIpxConfigRouterEncaps OBJECT-TYPE
SYNTAX INTEGER {
ethernetII(1),
ieee8022(2),
snap(3),
ieee8023Raw(4),
noGateway(5),
learn(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The type of encapsulation to for packets sent to
the default router on this interface. Note that
some of the enumerations for this object may not
be appropriate for some interface types."
::= { hpicfIpxConfigEntry 3 }
hpicfIpxConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this flag to 'enable' (the default) will
enable the IPX protocol stack on this interface.
Setting this flag to 'disable' will disable the IPX
protocol stack on this interface."
::= { hpicfIpxConfigEntry 4 }
hpicfIpxNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpxNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the IPX network number in use
for each encapsulation type on the agent's
interfaces. This information is learned dynamically
by the agent. An entry will only exist in this table
for a particular encapsulation type on a particular
interface if we have discovered a network number for
that encapsulation type on that interface."
::= { hpicfBasicIpxConfig 2 }
hpicfIpxNetEntry OBJECT-TYPE
SYNTAX HpicfIpxNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing the IPX network
number for a single encapsulation type on one of the
agent's interfaces."
INDEX { ifIndex, hpicfIpxNetEncaps }
::= { hpicfIpxNetTable 1 }
HpicfIpxNetEntry ::=
SEQUENCE {
hpicfIpxNetEncaps INTEGER,
hpicfIpxNetNumber OCTET STRING
}
hpicfIpxNetEncaps OBJECT-TYPE
SYNTAX INTEGER {
ethernetII(1),
ieee8022(2),
snap(3),
ieee8023Raw(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The encapsulation type for this entry."
::= { hpicfIpxNetEntry 1 }
hpicfIpxNetNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPX network number for this encapsulation on
this interface, in network byte order."
::= { hpicfIpxNetEntry 2 }
hpicfBasicTraps OBJECT IDENTIFIER ::= { hpicfBasic 10 }
-- The HP ICF Fixed Trap Table
hpicfFixedTrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfFixedTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table of mappings from notification ids to RMON
events.
This table contains one row for each notification
type supported by the agent. It provides a way of
configuring an RMON eventTable entry to be triggered
whenever this notification occurs. This way, each
notification can be configured to use a particular
community name (which selects a set of entries in
the trap destination table to send the notification
to), and provides a common point for configuring the
action to take when the notification condition
occurs."
::= { hpicfBasicTraps 1 }
hpicfFixedTrapEntry OBJECT-TYPE
SYNTAX HpicfFixedTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, describing the mapping for
a single notification id."
INDEX { hpicfFixedTrapID }
::= { hpicfFixedTrapTable 1 }
HpicfFixedTrapEntry ::=
SEQUENCE {
hpicfFixedTrapID OBJECT IDENTIFIER,
hpicfFixedTrapEventIndex Integer32
}
hpicfFixedTrapID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The object identifier of the notification this entry
provides mapping information for.
For notifications that are defined using the SNMPv2
NOTIFICATION-TYPE macro, the OID value assigned by
the macro is used directly as the hpicfFixedTrapID.
For traps defined using the SNMpv1 TRAP-TYPE macro,
the value of hpicfFixedTrapID is formed by adding
two subids to the trap enterprise. The first added
subid is 0, and the second is the specific trap
value assigned by the macro to the trap. Note: this
is the method specified in RFC 1908, 'Coexistence
between Version 1 and Version 2 of the
Internet-standard Network Management Framework' for
converting the enterprise and specific-trap fields
of a received Trap-PDU into a value of snmpTrapOID
for use in building an SNMPv2-Trap-PDU in a proxy
agent."
::= { hpicfFixedTrapEntry 1 }
hpicfFixedTrapEventIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of the eventEntry in the RMON MIB that
will be triggered when a condition exists for which
this notification is supposed to be sent. The
eventEntry identified by a particular value of this
index is the same as indentified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then no
association exists. In particular, if this value is
zero, no associated event will be generated, as zero
is not a valid event index.
Note that some agents may implement this object
read-only. In this case, it will indicate a
permanent entry in the eventTable for each
notification."
::= { hpicfFixedTrapEntry 2 }
hpicfTrapDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfTrapDestEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
A table of trap destinations."
::= { hpicfBasicTraps 2 }
hpicfTrapDestEntry OBJECT-TYPE
SYNTAX HpicfTrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information about
a single trap destination."
INDEX { hpicfTrapDestIndex }
::= { hpicfTrapDestTable 1 }
HpicfTrapDestEntry ::=
SEQUENCE {
hpicfTrapDestIndex Integer32,
hpicfTrapDestVersion INTEGER,
hpicfTrapDestCommunity OCTET STRING,
hpicfTrapDestTDomain TDomain,
hpicfTrapDestTAddress TAddress,
hpicfTrapDestFilter Integer32,
hpicfTrapDestStatus RowStatus,
hpicfTrapDestNotifyType INTEGER,
hpicfTrapDestRetries Interger32,
hpicfTrapDestTimeout TimeInterval
}
hpicfTrapDestIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
A value that uniquely identifies this
hpicfTrapDestEntry."
::= { hpicfTrapDestEntry 1 }
hpicfTrapDestVersion OBJECT-TYPE
SYNTAX INTEGER {
snmpv1(1),
snmpv2c(2)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
This object is used to indicate what version of
SNMP should be used to send the trap to this
destination. When the value of this object is
'snmpv1', the trap will be sent to this destination
as a Trap-PDU using an SNMPv1 message wrapper, as
specified in RFC 1157. When the value of this
object is 'snmpv2c', the trap will be sent to this
destination as a SNMPv2-Trap-PDU using the
Community-based SNMPv2 framework as specified in
RFC 1901.
An agent should reject an attempt to set an instance
of this object to a value representing a version of
the SNMP framework that is not supported by that
agent."
DEFVAL { snmpv1 }
::= { hpicfTrapDestEntry 2 }
hpicfTrapDestCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
A community to which this destination address
belongs.
This entry is associated with any entry in the RMON
MIB's eventTable whose value of eventCommunity is
equal to the value of this object. Every time an
associated event entry sends a trap due to an event,
that trap will be sent to each address in the
hpicfTrapDestTable with a hpicfTrapDestCommunity
equal to eventCommunity.
This object may not be modified if the associated
hpicfTrapDestStatus object is equal to active(1)."
DEFVAL { '7075626C6963'h } -- public
::= { hpicfTrapDestEntry 3 }
hpicfTrapDestTDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
The transport domain to use to send this trap.
This object may not be modified if the associated
hpicfTrapDestStatus object is equal to active(1)."
::= { hpicfTrapDestEntry 4 }
hpicfTrapDestTAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
The address to send traps to on behalf of this
entry, formatted according to the value of the
corresponding instance of the hpicfTrapDestTDomain
object.
This object may not be modified if the associated
hpicfTrapDestStatus object is equal to active(1)."
::= { hpicfTrapDestEntry 5 }
hpicfTrapDestFilter OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
The type of events that will be sent to this trap
receiver. This filter is mainly used for limiting
'system event' traps that will be sent to a specific
receiver.
This filter is specified as a sum of values, where
each value specifies a classification of traps that
will be sent to this trap receiver. The value for a
particular trap class C is computed as 2 raised to
a value representing C. The trap classes are
defined as follows:
C (bit#) Trap class
-----------------------------------------------
0 SNMP traps
1 informational events
2 warning events
3 critical events
4 debug events (HP internal use only)
For example, to specify that this trap receiver
should recieve SNMP traps and critical event traps,
this object should be set to a value of 9 (2^0 +
2^3).
Note that some agents may not support
trap filtering. Those agents may either implement
this object as read-only, or with a restricted
write syntax."
DEFVAL { 1 } -- SNMP traps only
::= { hpicfTrapDestEntry 6 }
hpicfTrapDestStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
The status of this trap destination entry.
An entry may not exist in the active state unless
all of the objects in the entry are consistent. In
particular, the value of hpicfTrapDestAddress must
have a legal length and value for the protocol
specified by hpicfTrapDestProtocol."
::= { hpicfTrapDestEntry 7 }
hpicfTrapDestNotifyType OBJECT-TYPE
SYNTAX INTEGER {
trap(1),
inform(2)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
This object is used to indicate what type of
SNMP trap/informs should be used.
When the value of this object is 'trap',
notifications will be sent. When the value of this
object is 'inform', informs will be sent."
DEFVAL { trap }
::= { hpicfTrapDestEntry 8 }
hpicfTrapDestRetries OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
This object is used to indicate what number of
retries to be attempted when a response is not
received for a generated message."
DEFVAL { 3 }
::= { hpicfTrapDestEntry 9 }
hpicfTrapDestTimeout OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
This object is used to indicate what number of
seconds between retries to be attempted when a
response is not received for a generated message."
DEFVAL { 1500 }
::= { hpicfTrapDestEntry 10 }
-- HP Basic extensions to the Remote Monitoring MIB.
hpicfBasicRmon OBJECT IDENTIFIER ::= { hpicfBasic 11 }
hpicfBasicAlarm OBJECT IDENTIFIER ::= { hpicfBasicRmon 3 }
hpicfBasicAlarmNVCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of alarmTable entries this
agent is capable of saving in nonvolatile storage."
::= { hpicfBasicAlarm 1 }
hpicfBasicAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfBasicAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP ICF specific extension to the RMON alarm table."
::= { hpicfBasicAlarm 2 }
hpicfBasicAlarmEntry OBJECT-TYPE
SYNTAX HpicfBasicAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Extensions for a single row in the RMON alarm
table."
AUGMENTS { alarmEntry }
::= { hpicfBasicAlarmTable 1 }
HpicfBasicAlarmEntry ::=
SEQUENCE {
hpicfBasicAlarmStorageType StorageType
}
hpicfBasicAlarmStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this alarm entry."
DEFVAL { volatile }
::= { hpicfBasicAlarmEntry 1 }
hpicfBasicEvent OBJECT IDENTIFIER ::= { hpicfBasicRmon 9 }
hpicfBasicEventNVCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of eventTable entries this
agent is capable of saving in nonvolatile storage."
::= { hpicfBasicEvent 1 }
hpicfBasicEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfBasicEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP ICF specific extension to the RMON event table."
::= { hpicfBasicEvent 2 }
hpicfBasicEventEntry OBJECT-TYPE
SYNTAX HpicfBasicEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Extensions for a single row in the RMON event
table."
AUGMENTS { eventEntry }
::= { hpicfBasicEventTable 1 }
HpicfBasicEventEntry ::=
SEQUENCE {
hpicfBasicEventStorageType StorageType
}
hpicfBasicEventStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this event entry.
Rows having the value 'permanent' allow write access
to the associated instances of eventCommunity and
eventType."
DEFVAL { volatile }
::= { hpicfBasicEventEntry 1 }
-- HP ICF Basic Traps
hpicfSelfTestTrap NOTIFICATION-TYPE
OBJECTS { hpicfSelfTestResultText }
STATUS current
DESCRIPTION "An hpicfSelfTestTrap indicates that the agent has
detected a non-critical failure. The value of the
hpicfSelfTestResultText object describing the failure
is sent in the trap. Note that this trap is sent
whenever a new failure is detected.
An agent should throttle the generation of
consecutive hpicfSelfTestTraps so that there is at
least a five-second gap between traps of this type.
When traps are throttled, the are dropped, not
queued for sending at a future time. (Note that
'generating' a trap means sending to all configured
recipients.)."
::= { hpicfCommonTrapsPrefix 4 }
-- HP ICF BASIC snmpTargetAddrLog Filter
hpicfBasicSnmpTargetAddrLogFilter OBJECT IDENTIFIER ::= { hpicfBasic 12}
hpicfSnmpTargetAddrLogFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfSnmpTargetAddrLogFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Adds an HpicfSnmpTargetAddrLogFilterEntry to
snmpTargetAddrTable."
::= { hpicfBasicSnmpTargetAddrLogFilter 1}
hpicfSnmpTargetAddrLogFilterEntry OBJECT-TYPE
SYNTAX HpicfSnmpTargetAddrLogFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Adds an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable."
AUGMENTS { snmpTargetAddrEntry }
::= { hpicfSnmpTargetAddrLogFilterTable 1 }
HpicfSnmpTargetAddrLogFilterEntry ::= SEQUENCE {
hpicfSnmpTargetAddrLogFilter Integer32 (0..31)
}
hpicfSnmpTargetAddrLogFilter OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The type of events that will be sent to this trap
receiver. This filter is mainly used for limiting
'system event' traps that will be sent to a specific
receiver.
This filter is specified as a sum of values, where
each value specifies a classification of traps that
will be sent to this trap receiver. The value for a
particular trap class C is computed as 2 raised to
a value representing C. The trap classes are
defined as follows:
C (bit#) Trap class
-----------------------------------------------
0 SNMP traps
1 informational events
2 warning events
3 critical events
4 debug events (HP internal use only)
For example, to specify that this trap receiver
should recieve SNMP traps and critical event traps,
this object should be set to a value of 9 (2^0 +
2^3).
Note that some agents may not support
trap filtering. Those agents may either implement
this object as read-only, or with a restricted
write syntax."
DEFVAL { 1 } -- SNMP traps only
::= { hpicfSnmpTargetAddrLogFilterEntry 1 }
-- HP ICF BASIC Domain Name Services Objects
hpicfBasicDNSConfig OBJECT IDENTIFIER ::= { hpicfBasic 15}
hpicfDNSDefaultDomainSuffix OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default domain name (A unique designator on the
network composed of symbols separated by dots) to
which resolver appends host names before sending the
queries to name servers. An example of a valid
default domain suffix is 'hp.com'. The resolver
will not use a default domain suffix if this object
is set to empty-string (which is the default value.)"
::= { hpicfBasicDNSConfig 1 }
hpicfDNSNameServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDNSNameServerEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "#### Deprecated #### A table that contains information about the
(DNS) Name Server configuration in this
device."
::= { hpicfBasicDNSConfig 2 }
hpicfDNSNameServerEntry OBJECT-TYPE
SYNTAX HpicfDNSNameServerEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "### deprecated ###Information about name server configuration entry
on this resolver device. "
INDEX { hpicfDNSNameServerAddress }
::= { hpicfDNSNameServerTable 1 }
HpicfDNSNameServerEntry ::=
SEQUENCE {
hpicfDNSNameServerAddress IpAddress,
hpicfDNSNameServerEntryStatus RowStatus
}
hpicfDNSNameServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION "### Deprecated ###IPv4 address of the given name server."
::= { hpicfDNSNameServerEntry 1 }
hpicfDNSNameServerEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "### Deprecated ###The row status of a given name server entry."
::= { hpicfDNSNameServerEntry 2 }
hpicfInetDNSNameServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfInetDNSNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains information about the
(DNS) Name Server configuration in this
device.This table has 3 index's PRIORITY ADDRTYPE
ADDR,for each pririoty only one address can be configured."
::= { hpicfBasicDNSConfig 3 }
hpicfInetDNSNameServerEntry OBJECT-TYPE
SYNTAX HpicfInetDNSNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in hpicfInetDNSNameServerEntry contains single
manually configured DNS Address
on this resolver device. "
INDEX { hpicfInetDNSNameServerAddrIndex,
hpicfInetDNSNameServerAddrType,
hpicfInetDNSNameServerAddress }
::= { hpicfInetDNSNameServerTable 1 }
HpicfInetDNSNameServerEntry ::=
SEQUENCE {
hpicfInetDNSNameServerAddrIndex INTEGER,
hpicfInetDNSNameServerAddrType InetAddressType,
hpicfInetDNSNameServerAddress InetAddress,
hpicfInetDNSNameServerEntryStatus RowStatus
}
hpicfInetDNSNameServerAddrIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index(which is also treated as priority) of DNS server address
configured."
::= { hpicfInetDNSNameServerEntry 1 }
hpicfInetDNSNameServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Address Type of the DNS Name server stored in hpicfInetDNSNameServer
Address."
::= { hpicfInetDNSNameServerEntry 2 }
hpicfInetDNSNameServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Address of DNS and type of address stored is
is mentioned in hpicfInetDNSNameServerAddType
This field needs to be used in conjuction with
hpicfInetDNSNameServerAddrType."
::= { hpicfInetDNSNameServerEntry 3 }
hpicfInetDNSNameServerEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row status of a given name server entry."
::= { hpicfInetDNSNameServerEntry 4 }
-- HP ICF BASIC Banner
hpicfBannerStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When the value of this object is 'enabled(1)', it means
that the banner has been configured and will be displayed
at console or web-ui login. When the value of this object
is disabled(2), it means the banner has been unconfigured."
DEFVAL { 1 }
::= { hpicfBasic 13 }
hpicfBanner OBJECT IDENTIFIER ::= { hpicfBasic 14}
hpicfBannerMOTD OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..1300))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "An administratively configured message that is displayed
to the user when logged in to the device through
either the console or web-ui"
::= { hpicfBanner 1 }
hpicfResetDefault OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The switch boots from 'primary image' or 'secondary image'
based on this object."
::= { hpicfBasic 16 }
hpicfTelnet6Enable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When the value of this object is 'enabled(1)', the
telnet6 server on this agent is running and allowed to
accept connections. When the value of this object is
'disabled(2)', no incoming telnet6 connections will be
accepted by this agent."
::= { hpicfBasic 17 }
-- Conformance information
hpicfBasicConformance OBJECT IDENTIFIER ::= { hpicfBasicMib 1 }
hpicfBasicCompliances OBJECT IDENTIFIER ::= { hpicfBasicConformance 1 }
hpicfBasicGroups OBJECT IDENTIFIER ::= { hpicfBasicConformance 2 }
-- compliance statements
hpicfBasicCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********
A compliance statement basic management and
configuration of HP ICF hubs."
MODULE
MANDATORY-GROUPS { hpicfBasicGroup }
GROUP hpicfTelnetGroup
DESCRIPTION "This group is required for devices that
support telnet access."
::= { hpicfBasicCompliances 1 }
hpicfNewBasicCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********
A new compliance statement for this module."
MODULE
MANDATORY-GROUPS { hpicfNewBasicGroup,
hpicfBasicIpConfigGroup,
hpicfBasicIpxConfigGroup,
hpicfBasicFixedTrapGroup,
hpicfBasicTrapDestGroup,
hpicfBasicRmonNVGroup,
hpicfBasicSelfTestNotifyGroup }
GROUP hpicfDiscoverGroup
DESCRIPTION "This group is required for devices that use
the mapping announcement feature for topology.
This method is generally only used in devices
that would ordinarily not be originating traffic
other than responses to network management
requests (e.g. repeaters and switches)."
-- GROUP hpicfBasicSnmpNotifyLogFilterTable
-- DESCRIPTION "This group is required for devices that support
-- SNMPv3."
OBJECT hpicfIpConfigPingRouter
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is only required
in devices that would ordinarily not be
originating traffic other than responses to
network management requests (e.g. repeaters and
switches)."
OBJECT hpicfIpConfigMtu
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required."
OBJECT hpicfFixedTrapEventIndex
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required.
This would allow configuration of the
community name and action to be taken for each
fixed trap, but would not allow changing the
eventIndex that the trap points to."
OBJECT hpicfTrapDestFilter
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required."
OBJECT hpicfTrapDestVersion
SYNTAX INTEGER { snmpv1(1) }
DESCRIPTION "Support for the 'snmpv2c' enumeration should
only be implemented if the agent supports the
Community-based SNMPv2 framework."
::= { hpicfBasicCompliances 2 }
hpicfBasicCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********"
MODULE
MANDATORY-GROUPS { hpicfNewBasicGroup,
hpicfBasicIpConfigGroup2,
hpicfBasicFixedTrapGroup,
hpicfBasicTrapDestGroup,
hpicfBasicSelfTestNotifyGroup }
GROUP hpicfBasicIpxConfigGroup
DESCRIPTION "This group is only required for devices that
support management access over an IPX
protocol stack."
GROUP hpicfAnnounceDiscoveryGroup
DESCRIPTION "This group is required for devices that use
the mapping announcement feature for topology.
This method is generally only used in devices
that would ordinarily not be originating traffic
other than responses to network management
requests (e.g. repeaters and switches)."
GROUP hpicfBasicRmonNVGroup
DESCRIPTION "This group is only required for devices that
allow management stations to selectively store
RMON alarms and events in non-volatile memory."
OBJECT hpicfIpGlobalPingRouter
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is only required
in devices that would ordinarily not be
originating traffic other than responses to
network management requests (e.g. repeaters and
switches)."
OBJECT hpicfIpConfigMtu
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required."
OBJECT hpicfFixedTrapEventIndex
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required.
This would allow configuration of the
community name and action to be taken for each
fixed trap, but would not allow changing the
eventIndex that the trap points to."
OBJECT hpicfTrapDestFilter
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required."
OBJECT hpicfTrapDestVersion
SYNTAX INTEGER { snmpv1(1) }
DESCRIPTION "Support for the 'snmpv2c' enumeration should
only be implemented if the agent supports the
Community-based SNMPv2 framework."
::= { hpicfBasicCompliances 3 }
hpicfBasicCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********"
MODULE
MANDATORY-GROUPS { hpicfNewBasicGroup,
hpicfBasicIpConfigGroup2,
hpicfBasicFixedTrapGroup,
hpicfBasicSelfTestNotifyGroup }
GROUP hpicfBasicIpxConfigGroup
DESCRIPTION "This group is only required for devices that
support management access over an IPX
protocol stack."
GROUP hpicfAnnounceDiscoveryGroup
DESCRIPTION "This group is required for devices that use
the mapping announcement feature for topology.
This method is generally only used in devices
that would ordinarily not be originating traffic
other than responses to network management
requests (e.g. repeaters and switches)."
GROUP hpicfBasicRmonNVGroup
DESCRIPTION "This group is only required for devices that
allow management stations to selectively store
RMON alarms and events in non-volatile memory."
GROUP hpicfSnmpTargetAddrLogFilterGroup
DESCRIPTION "This group is required for devices that supports
SNMPv3 and log filtering."
OBJECT hpicfIpGlobalPingRouter
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is only required
in devices that would ordinarily not be
originating traffic other than responses to
network management requests (e.g. repeaters and
switches)."
OBJECT hpicfIpConfigMtu
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required."
OBJECT hpicfFixedTrapEventIndex
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required.
This would allow configuration of the
community name and action to be taken for each
fixed trap, but would not allow changing the
eventIndex that the trap points to."
::= { hpicfBasicCompliances 4 }
hpicfBasicCompliance5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********"
MODULE
MANDATORY-GROUPS { hpicfNewBasicGroup,
hpicfBasicIpConfigGroup3,
hpicfBasicFixedTrapGroup,
hpicfBasicSelfTestNotifyGroup,
hpicfBasicBannerGroup }
GROUP hpicfBasicIpxConfigGroup
DESCRIPTION "This group is only required for devices that
support management access over an IPX
protocol stack."
GROUP hpicfAnnounceDiscoveryGroup
DESCRIPTION "This group is required for devices that use
the mapping announcement feature for topology.
This method is generally only used in devices
that would ordinarily not be originating traffic
other than responses to network management
requests (e.g. repeaters and switches)."
GROUP hpicfBasicRmonNVGroup
DESCRIPTION "This group is only required for devices that
allow management stations to selectively store
RMON alarms and events in non-volatile memory."
GROUP hpicfSnmpTargetAddrLogFilterGroup
DESCRIPTION "This group is required for devices that supports
SNMPv3 and log filtering."
OBJECT hpicfIpGlobalPingRouter
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is only required
in devices that would ordinarily not be
originating traffic other than responses to
network management requests (e.g. repeaters and
switches)."
OBJECT hpicfIpConfigMtu
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required."
OBJECT hpicfFixedTrapEventIndex
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required.
This would allow configuration of the
community name and action to be taken for each
fixed trap, but would not allow changing the
eventIndex that the trap points to."
::= { hpicfBasicCompliances 5 }
hpicfBasicCompliance6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********"
MODULE
MANDATORY-GROUPS { hpicfNewBasicGroup,
hpicfBasicIpConfigGroup3,
hpicfBasicFixedTrapGroup,
hpicfBasicSelfTestNotifyGroup
}
GROUP hpicfBasicIpxConfigGroup
DESCRIPTION "This group is only required for devices that
support management access over an IPX
protocol stack."
GROUP hpicfAnnounceDiscoveryGroup
DESCRIPTION "This group is required for devices that use
the mapping announcement feature for topology.
This method is generally only used in devices
that would ordinarily not be originating traffic
other than responses to network management
requests (e.g. repeaters and switches)."
GROUP hpicfBasicRmonNVGroup
DESCRIPTION "This group is only required for devices that
allow management stations to selectively store
RMON alarms and events in non-volatile memory."
GROUP hpicfSnmpTargetAddrLogFilterGroup
DESCRIPTION "This group is required for devices that supports
SNMPv3 and log filtering."
OBJECT hpicfIpGlobalPingRouter
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is only required
in devices that would ordinarily not be
originating traffic other than responses to
network management requests (e.g. repeaters and
switches)."
OBJECT hpicfIpConfigMtu
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required."
OBJECT hpicfFixedTrapEventIndex
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required.
This would allow configuration of the
community name and action to be taken for each
fixed trap, but would not allow changing the
eventIndex that the trap points to."
GROUP hpicfBasicDNSConfigGroup
DESCRIPTION "This group is only required for devices that
support DNS resolver capability."
::= { hpicfBasicCompliances 6 }
hpicfBasicCompliance7 MODULE-COMPLIANCE
STATUS current
DESCRIPTION "An updated compliance statement for this module."
MODULE
MANDATORY-GROUPS { hpicfBasicGroup1,
hpicfBasicIpConfigGroup3,
hpicfBasicFixedTrapGroup,
hpicfBasicSelfTestNotifyGroup
}
GROUP hpicfBasicIpxConfigGroup
DESCRIPTION "This group is only required for devices that
support management access over an IPX
protocol stack."
GROUP hpicfAnnounceDiscoveryGroup
DESCRIPTION "This group is required for devices that use
the mapping announcement feature for topology.
This method is generally only used in devices
that would ordinarily not be originating traffic
other than responses to network management
requests (e.g. repeaters and switches)."
GROUP hpicfBasicRmonNVGroup
DESCRIPTION "This group is only required for devices that
allow management stations to selectively store
RMON alarms and events in non-volatile memory."
GROUP hpicfSnmpTargetAddrLogFilterGroup
DESCRIPTION "This group is required for devices that supports
SNMPv3 and log filtering."
OBJECT hpicfIpGlobalPingRouter
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is only required
in devices that would ordinarily not be
originating traffic other than responses to
network management requests (e.g. repeaters and
switches)."
OBJECT hpicfIpConfigMtu
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required."
OBJECT hpicfFixedTrapEventIndex
MIN-ACCESS read-only
DESCRIPTION "Write access to this object is not required.
This would allow configuration of the
community name and action to be taken for each
fixed trap, but would not allow changing the
eventIndex that the trap points to."
GROUP hpicfBasicDNSConfigGroup
DESCRIPTION "This group is only required for devices that
support DNS resolver capability."
::= { hpicfBasicCompliances 7 }
-- units of conformance
hpicfBasicGroup OBJECT-GROUP
OBJECTS { hpicfReset,
hpicfSelfTest
}
STATUS deprecated
DESCRIPTION "********* THIS GROUP IS DEPRECATED *********
A collection of objects for basic reset/selftest
control on ICF devices."
::= { hpicfBasicGroups 1 }
hpicfTelnetGroup OBJECT-GROUP
OBJECTS { hpicfTelnetEnable }
STATUS deprecated
DESCRIPTION "********* THIS GROUP IS DEPRECATED *********
A collection of objects for managing the telnet
server on ICF devices."
::= { hpicfBasicGroups 2 }
hpicfNewBasicGroup OBJECT-GROUP
OBJECTS { hpicfReset,
hpicfSelfTest,
hpicfTelnetEnable,
hpicfConfigClear,
hpicfSelfTestResultCode,
hpicfSelfTestResultText,
hpicfSelfTestResultTime,
hpicfBannerStatus }
STATUS deprecated
DESCRIPTION "********* THIS GROUP IS DEPRECATED *********
A collection of objects for basic management of
ICF devices."
::= { hpicfBasicGroups 3 }
hpicfDiscoverGroup OBJECT-GROUP
OBJECTS { hpicfAnnounceAddress,
hpicfIfEntLogicalIndex }
STATUS deprecated
DESCRIPTION "********* THIS GROUP IS DEPRECATED *********
A collection of objects to assist in discovering
and mapping ICF devices."
::= { hpicfBasicGroups 4 }
hpicfBasicIpConfigGroup OBJECT-GROUP
OBJECTS { hpicfIpConfigAddress,
hpicfIpConfigAddrMask,
hpicfIpConfigDefaultRouter,
hpicfIpConfigPingRouter,
hpicfIpConfigMtu,
hpicfIpConfigAdminStatus
}
STATUS deprecated
DESCRIPTION "********* THIS GROUP IS DEPRECATED *********
A collection of objects for configuring the IP
protocol stack in ICF agents."
::= { hpicfBasicGroups 5 }
hpicfBasicIpxConfigGroup OBJECT-GROUP
OBJECTS { hpicfIpxConfigNodeAddress,
hpicfIpxConfigDefaultRouter,
hpicfIpxConfigRouterEncaps,
hpicfIpxConfigAdminStatus,
hpicfIpxNetNumber
}
STATUS current
DESCRIPTION "A collection of objects for configuring the IPX
protocol stack in ICF agents."
::= { hpicfBasicGroups 6 }
hpicfBasicFixedTrapGroup OBJECT-GROUP
OBJECTS { hpicfFixedTrapEventIndex }
STATUS current
DESCRIPTION "A collection of objects for managing fixed
(i.e. non-threshold) traps on ICF devices.
Implementation of this group requires
implementation of the RMON event group."
::= { hpicfBasicGroups 7 }
hpicfBasicTrapDestGroup OBJECT-GROUP
OBJECTS { hpicfTrapDestVersion,
hpicfTrapDestCommunity,
hpicfTrapDestTDomain,
hpicfTrapDestTAddress,
hpicfTrapDestFilter,
hpicfTrapDestStatus
}
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
A collection of objects for configuring trap
destinations on ICF devices. Implementation of this
group requires implementation of the RMON event
group."
::= { hpicfBasicGroups 8 }
hpicfBasicRmonNVGroup OBJECT-GROUP
OBJECTS { hpicfBasicAlarmNVCapacity,
hpicfBasicAlarmStorageType,
hpicfBasicEventNVCapacity,
hpicfBasicEventStorageType
}
STATUS current
DESCRIPTION "A collection of objects for controlling which
RMON alarm and event table entries are saved in
non-volatile storage."
::= { hpicfBasicGroups 9 }
hpicfBasicSelfTestNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { hpicfSelfTestTrap }
STATUS current
DESCRIPTION "A collection of notifications used to indicate
changes in selfTest status"
::= { hpicfBasicGroups 10 }
hpicfBasicWebAgentGroup OBJECT-GROUP
OBJECTS { hpicfWebAgentEnable }
STATUS current
DESCRIPTION "A collection of objects for managing the EHTTPD
server in ICF devices."
::= { hpicfBasicGroups 11 }
hpicfAnnounceDiscoveryGroup OBJECT-GROUP
OBJECTS { hpicfAnnounceDiscoveryAddress }
STATUS current
DESCRIPTION "A collection of objects to assist in discovering
and mapping ICF devices."
::= { hpicfBasicGroups 12 }
hpicfBasicIpConfigGroup2 OBJECT-GROUP
OBJECTS { hpicfIpConfigAddress,
hpicfIpConfigAddrMask,
hpicfIpConfigMtu,
hpicfIpConfigAdminStatus,
hpicfIpGlobalDefaultRouter,
hpicfIpGlobalPingRouter
}
STATUS current
DESCRIPTION "A collection of objects for configuring the IP
protocol stack in agents that support only a
single global default router."
::= { hpicfBasicGroups 13 }
hpicfBasicProxyArpGroup OBJECT-GROUP
OBJECTS { hpicfIpConfigProxyArp }
STATUS current
DESCRIPTION "A group of objects for configuring proxy ARP
on devices that support IP forwarding."
::= { hpicfBasicGroups 14 }
hpicfBasicIpSecondaryGroup OBJECT-GROUP
OBJECTS { hpicfIpAddrMask,
hpicfIpAddrStatus
}
STATUS current
DESCRIPTION "A group of objects for configuring secondary IP
addresses on devices that support more than one
IP address on an interface."
::= { hpicfBasicGroups 15 }
hpicfSnmpTargetAddrLogFilterGroup OBJECT-GROUP
OBJECTS { hpicfSnmpTargetAddrLogFilter }
STATUS current
DESCRIPTION "A group of objects to add an HpicfSnmpTargetAddrLogFilterEntry
to snmpTargetAddrTable."
::= { hpicfBasicGroups 16 }
hpicfBasicIpConfigGroup3 OBJECT-GROUP
OBJECTS { hpicfIpConfigAddress,
hpicfIpConfigAddrMask,
hpicfIpConfigMtu,
hpicfIpConfigAdminStatus,
hpicfIpGlobalDefaultRouter,
hpicfIpGlobalPingRouter,
hpicfIpZeroBroadcastEnable
}
STATUS current
DESCRIPTION "A collection of objects for configuring the IP
protocol stack in agents that support only a
single global default router."
::= { hpicfBasicGroups 17 }
hpicfBasicBannerGroup OBJECT-GROUP
OBJECTS { hpicfBannerMOTD }
STATUS current
DESCRIPTION "A group of objects for configuring banners for
display on console and web-ui at login"
::= { hpicfBasicGroups 18 }
hpicfBasicDNSConfigGroup OBJECT-GROUP
OBJECTS { hpicfDNSDefaultDomainSuffix,
hpicfDNSNameServerEntryStatus
}
STATUS current
DESCRIPTION "A collection of objects for configuring the DNS
resolver facility in agents that are capable of
resolving host names to IP addresses."
::= { hpicfBasicGroups 19 }
hpicfBasicGroup1 OBJECT-GROUP
OBJECTS { hpicfReset,
hpicfSelfTest,
hpicfTelnetEnable,
hpicfConfigClear,
hpicfSelfTestResultCode,
hpicfSelfTestResultText,
hpicfSelfTestResultTime,
hpicfBannerStatus,
hpicfResetDefault }
STATUS current
DESCRIPTION "A collection of objects for basic management of
ICF devices."
::= { hpicfBasicGroups 20 }
END
Reference in a new issue View git blame Copy permalink